diff options
Diffstat (limited to 'arch/mips/txx9/rbtx4938/setup.c')
| -rw-r--r-- | arch/mips/txx9/rbtx4938/setup.c | 64 |
1 files changed, 56 insertions, 8 deletions
diff --git a/arch/mips/txx9/rbtx4938/setup.c b/arch/mips/txx9/rbtx4938/setup.c index 9ab48dec0fe..547ff2920bf 100644 --- a/arch/mips/txx9/rbtx4938/setup.c +++ b/arch/mips/txx9/rbtx4938/setup.c @@ -15,6 +15,7 @@ #include <linux/delay.h> #include <linux/platform_device.h> #include <linux/gpio.h> +#include <linux/mtd/physmap.h> #include <asm/reboot.h> #include <asm/io.h> @@ -110,6 +111,7 @@ static void __init rbtx4938_pci_setup(void) #define SEEPROM2_CS 0 /* IOC */ #define SEEPROM3_CS 1 /* IOC */ #define SRTC_CS 2 /* IOC */ +#define SPI_BUSNO 0 static int __init rbtx4938_ethaddr_init(void) { @@ -119,7 +121,7 @@ static int __init rbtx4938_ethaddr_init(void) int i; /* 0-3: "MAC\0", 4-9:eth0, 10-15:eth1, 16:sum */ - if (spi_eeprom_read(SEEPROM1_CS, 0, dat, sizeof(dat))) { + if (spi_eeprom_read(SPI_BUSNO, SEEPROM1_CS, 0, dat, sizeof(dat))) { printk(KERN_ERR "seeprom: read error.\n"); return -ENODEV; } else { @@ -173,23 +175,30 @@ static void __init rbtx4938_mem_setup(void) #endif #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61 - printk(KERN_INFO "PIOSEL: disabling both ata and nand selection\n"); + pr_info("PIOSEL: disabling both ATA and NAND selection\n"); txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL | TX4938_PCFG_ATA_SEL); #endif #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND - printk(KERN_INFO "PIOSEL: enabling nand selection\n"); + pr_info("PIOSEL: enabling NAND selection\n"); txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL); txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL); #endif #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA - printk(KERN_INFO "PIOSEL: enabling ata selection\n"); + pr_info("PIOSEL: enabling ATA selection\n"); txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL); txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL); #endif +#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_KEEP + pcfg = ____raw_readq(&tx4938_ccfgptr->pcfg); + pr_info("PIOSEL: NAND %s, ATA %s\n", + (pcfg & TX4938_PCFG_NDF_SEL) ? "enabled" : "disabled", + (pcfg & TX4938_PCFG_ATA_SEL) ? "enabled" : "disabled"); +#endif + rbtx4938_spi_setup(); pcfg = ____raw_readq(&tx4938_ccfgptr->pcfg); /* updated */ /* fixup piosel */ @@ -279,9 +288,9 @@ static int __init rbtx4938_spi_init(void) .mode = SPI_MODE_1 | SPI_CS_HIGH, }; spi_register_board_info(&srtc_info, 1); - spi_eeprom_register(SEEPROM1_CS); - spi_eeprom_register(16 + SEEPROM2_CS); - spi_eeprom_register(16 + SEEPROM3_CS); + spi_eeprom_register(SPI_BUSNO, SEEPROM1_CS, 128); + spi_eeprom_register(SPI_BUSNO, 16 + SEEPROM2_CS, 128); + spi_eeprom_register(SPI_BUSNO, 16 + SEEPROM3_CS, 128); gpio_request(16 + SRTC_CS, "rtc-rs5c348"); gpio_direction_output(16 + SRTC_CS, 0); gpio_request(SEEPROM1_CS, "seeprom1"); @@ -290,10 +299,46 @@ static int __init rbtx4938_spi_init(void) gpio_direction_output(16 + SEEPROM2_CS, 1); gpio_request(16 + SEEPROM3_CS, "seeprom3"); gpio_direction_output(16 + SEEPROM3_CS, 1); - tx4938_spi_init(0); + tx4938_spi_init(SPI_BUSNO); return 0; } +static void __init rbtx4938_mtd_init(void) +{ + struct physmap_flash_data pdata = { + .width = 4, + }; + + switch (readb(rbtx4938_bdipsw_addr) & 7) { + case 0: + /* Boot */ + txx9_physmap_flash_init(0, 0x1fc00000, 0x400000, &pdata); + /* System */ + txx9_physmap_flash_init(1, 0x1e000000, 0x1000000, &pdata); + break; + case 1: + /* System */ + txx9_physmap_flash_init(0, 0x1f000000, 0x1000000, &pdata); + /* Boot */ + txx9_physmap_flash_init(1, 0x1ec00000, 0x400000, &pdata); + break; + case 2: + /* Ext */ + txx9_physmap_flash_init(0, 0x1f000000, 0x1000000, &pdata); + /* System */ + txx9_physmap_flash_init(1, 0x1e000000, 0x1000000, &pdata); + /* Boot */ + txx9_physmap_flash_init(2, 0x1dc00000, 0x400000, &pdata); + break; + case 3: + /* Boot */ + txx9_physmap_flash_init(1, 0x1bc00000, 0x400000, &pdata); + /* System */ + txx9_physmap_flash_init(2, 0x1a000000, 0x1000000, &pdata); + break; + } +} + static void __init rbtx4938_arch_init(void) { gpiochip_add(&rbtx4938_spi_gpio_chip); @@ -306,6 +351,9 @@ static void __init rbtx4938_device_init(void) rbtx4938_ethaddr_init(); rbtx4938_ne_init(); tx4938_wdt_init(); + rbtx4938_mtd_init(); + tx4938_ata_init(RBTX4938_IRQ_IOC_ATA, 0, 1); + txx9_iocled_init(RBTX4938_LED_ADDR - IO_BASE, -1, 8, 1, "green", NULL); } struct txx9_board_vec rbtx4938_vec __initdata = { |