diff options
Diffstat (limited to 'arch/mips')
-rw-r--r-- | arch/mips/Kconfig | 24 | ||||
-rw-r--r-- | arch/mips/kernel/kspd.c | 19 | ||||
-rw-r--r-- | arch/mips/kernel/mips-mt.c | 22 | ||||
-rw-r--r-- | arch/mips/kernel/rtlx.c | 22 | ||||
-rw-r--r-- | arch/mips/kernel/smtc.c | 16 | ||||
-rw-r--r-- | arch/mips/kernel/vpe.c | 263 |
6 files changed, 197 insertions, 169 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 0893e084150..3513e226837 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1377,17 +1377,6 @@ config MIPS_MT_SMTC This is a kernel model which is known a SMTC or lately has been marketesed into SMVP. -config MIPS_VPE_LOADER - bool "VPE loader support." - depends on SYS_SUPPORTS_MULTITHREADING - select CPU_MIPSR2_IRQ_VI - select CPU_MIPSR2_IRQ_EI - select CPU_MIPSR2_SRS - select MIPS_MT - help - Includes a loader for loading an elf relocatable object - onto another VPE and running it. - endchoice config MIPS_MT @@ -1398,8 +1387,19 @@ config SYS_SUPPORTS_MULTITHREADING config MIPS_MT_FPAFF bool "Dynamic FPU affinity for FP-intensive threads" - depends on MIPS_MT default y + depends on MIPS_MT_SMP || MIPS_MT_SMTC + +config MIPS_VPE_LOADER + bool "VPE loader support." + depends on SYS_SUPPORTS_MULTITHREADING + select CPU_MIPSR2_IRQ_VI + select CPU_MIPSR2_IRQ_EI + select CPU_MIPSR2_SRS + select MIPS_MT + help + Includes a loader for loading an elf relocatable object + onto another VPE and running it. config MIPS_MT_SMTC_INSTANT_REPLAY bool "Low-latency Dispatch of Deferred SMTC IPIs" diff --git a/arch/mips/kernel/kspd.c b/arch/mips/kernel/kspd.c index c6580018c94..cb9a14a1ca5 100644 --- a/arch/mips/kernel/kspd.c +++ b/arch/mips/kernel/kspd.c @@ -89,7 +89,7 @@ static int sp_stopping = 0; #define MTSP_O_EXCL 0x0800 #define MTSP_O_BINARY 0x8000 -#define SP_VPE 1 +extern int tclimit; struct apsp_table { int sp; @@ -225,8 +225,8 @@ void sp_work_handle_request(void) /* Run the syscall at the priviledge of the user who loaded the SP program */ - if (vpe_getuid(SP_VPE)) - sp_setfsuidgid( vpe_getuid(SP_VPE), vpe_getgid(SP_VPE)); + if (vpe_getuid(tclimit)) + sp_setfsuidgid(vpe_getuid(tclimit), vpe_getgid(tclimit)); switch (sc.cmd) { /* needs the flags argument translating from SDE kit to @@ -245,7 +245,7 @@ void sp_work_handle_request(void) case MTSP_SYSCALL_EXIT: list_for_each_entry(n, &kspd_notifylist, list) - n->kspd_sp_exit(SP_VPE); + n->kspd_sp_exit(tclimit); sp_stopping = 1; printk(KERN_DEBUG "KSPD got exit syscall from SP exitcode %d\n", @@ -255,7 +255,7 @@ void sp_work_handle_request(void) case MTSP_SYSCALL_OPEN: generic.arg1 = translate_open_flags(generic.arg1); - vcwd = vpe_getcwd(SP_VPE); + vcwd = vpe_getcwd(tclimit); /* change to the cwd of the process that loaded the SP program */ old_fs = get_fs(); @@ -283,7 +283,7 @@ void sp_work_handle_request(void) break; } /* switch */ - if (vpe_getuid(SP_VPE)) + if (vpe_getuid(tclimit)) sp_setfsuidgid( 0, 0); old_fs = get_fs(); @@ -364,10 +364,9 @@ static void startwork(int vpe) } INIT_WORK(&work, sp_work); - queue_work(workqueue, &work); - } else - queue_work(workqueue, &work); + } + queue_work(workqueue, &work); } static void stopwork(int vpe) @@ -389,7 +388,7 @@ static int kspd_module_init(void) notify.start = startwork; notify.stop = stopwork; - vpe_notify(SP_VPE, ¬ify); + vpe_notify(tclimit, ¬ify); return 0; } diff --git a/arch/mips/kernel/mips-mt.c b/arch/mips/kernel/mips-mt.c index 1a7d8923129..7169a4db37b 100644 --- a/arch/mips/kernel/mips-mt.c +++ b/arch/mips/kernel/mips-mt.c @@ -21,6 +21,28 @@ #include <asm/r4kcache.h> #include <asm/cacheflush.h> +int vpelimit; + +static int __init maxvpes(char *str) +{ + get_option(&str, &vpelimit); + + return 1; +} + +__setup("maxvpes=", maxvpes); + +int tclimit; + +static int __init maxtcs(char *str) +{ + get_option(&str, &tclimit); + + return 1; +} + +__setup("maxtcs=", maxtcs); + /* * Dump new MIPS MT state for the core. Does not leave TCs halted. * Takes an argument which taken to be a pre-call MVPControl value. diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c index 8cf24d716d4..5c040060560 100644 --- a/arch/mips/kernel/rtlx.c +++ b/arch/mips/kernel/rtlx.c @@ -40,12 +40,11 @@ #include <asm/atomic.h> #include <asm/cpu.h> #include <asm/processor.h> +#include <asm/mips_mt.h> #include <asm/system.h> #include <asm/vpe.h> #include <asm/rtlx.h> -#define RTLX_TARG_VPE 1 - static struct rtlx_info *rtlx; static int major; static char module_name[] = "rtlx"; @@ -165,10 +164,10 @@ int rtlx_open(int index, int can_sleep) } if (rtlx == NULL) { - if( (p = vpe_get_shared(RTLX_TARG_VPE)) == NULL) { + if( (p = vpe_get_shared(tclimit)) == NULL) { if (can_sleep) { __wait_event_interruptible(channel_wqs[index].lx_queue, - (p = vpe_get_shared(RTLX_TARG_VPE)), + (p = vpe_get_shared(tclimit)), ret); if (ret) goto out_fail; @@ -477,6 +476,19 @@ static int rtlx_module_init(void) struct device *dev; int i, err; + if (!cpu_has_mipsmt) { + printk("VPE loader: not a MIPS MT capable processor\n"); + return -ENODEV; + } + + if (tclimit == 0) { + printk(KERN_WARNING "No TCs reserved for AP/SP, not " + "initializing RTLX.\nPass maxtcs=<n> argument as kernel " + "argument\n"); + + return -ENODEV; + } + major = register_chrdev(0, module_name, &rtlx_fops); if (major < 0) { printk(register_chrdev_failed); @@ -501,7 +513,7 @@ static int rtlx_module_init(void) /* set up notifiers */ notify.start = starting; notify.stop = stopping; - vpe_notify(RTLX_TARG_VPE, ¬ify); + vpe_notify(tclimit, ¬ify); if (cpu_has_vint) set_vi_handler(MIPS_CPU_RTLX_IRQ, rtlx_dispatch); diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c index f2c7aed663e..6b3c3ea8bc6 100644 --- a/arch/mips/kernel/smtc.c +++ b/arch/mips/kernel/smtc.c @@ -86,25 +86,11 @@ unsigned int smtc_status = 0; /* Boot command line configuration overrides */ -static int vpelimit = 0; -static int tclimit = 0; static int ipibuffers = 0; static int nostlb = 0; static int asidmask = 0; unsigned long smtc_asid_mask = 0xff; -static int __init maxvpes(char *str) -{ - get_option(&str, &vpelimit); - return 1; -} - -static int __init maxtcs(char *str) -{ - get_option(&str, &tclimit); - return 1; -} - static int __init ipibufs(char *str) { get_option(&str, &ipibuffers); @@ -137,8 +123,6 @@ static int __init asidmask_set(char *str) return 1; } -__setup("maxvpes=", maxvpes); -__setup("maxtcs=", maxtcs); __setup("ipibufs=", ipibufs); __setup("nostlb", stlb_disable); __setup("asidmask=", asidmask_set); diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c index a2bee10f04c..c726c47cd2c 100644 --- a/arch/mips/kernel/vpe.c +++ b/arch/mips/kernel/vpe.c @@ -27,7 +27,6 @@ * To load and run, simply cat a SP 'program file' to /dev/vpe1. * i.e cat spapp >/dev/vpe1. */ - #include <linux/kernel.h> #include <linux/device.h> #include <linux/module.h> @@ -54,6 +53,7 @@ #include <asm/system.h> #include <asm/vpe.h> #include <asm/kspd.h> +#include <asm/mips_mt.h> typedef void *vpe_handle; @@ -132,14 +132,9 @@ struct tc { enum tc_state state; int index; - /* parent VPE */ - struct vpe *pvpe; - - /* The list of TC's with this VPE */ - struct list_head tc; - - /* The global list of tc's */ - struct list_head list; + struct vpe *pvpe; /* parent VPE */ + struct list_head tc; /* The list of TC's with this VPE */ + struct list_head list; /* The global list of tc's */ }; struct { @@ -217,18 +212,17 @@ struct vpe *alloc_vpe(int minor) /* allocate a tc. At startup only tc0 is running, all other can be halted. */ struct tc *alloc_tc(int index) { - struct tc *t; - - if ((t = kzalloc(sizeof(struct tc), GFP_KERNEL)) == NULL) { - return NULL; - } + struct tc *tc; - INIT_LIST_HEAD(&t->tc); - list_add_tail(&t->list, &vpecontrol.tc_list); + if ((tc = kzalloc(sizeof(struct tc), GFP_KERNEL)) == NULL) + goto out; - t->index = index; + INIT_LIST_HEAD(&tc->tc); + tc->index = index; + list_add_tail(&tc->list, &vpecontrol.tc_list); - return t; +out: + return tc; } /* clean up and free everything */ @@ -663,66 +657,48 @@ static void dump_elfsymbols(Elf_Shdr * sechdrs, unsigned int symindex, } #endif -static void dump_tc(struct tc *t) -{ - unsigned long val; - - settc(t->index); - printk(KERN_DEBUG "VPE loader: TC index %d targtc %ld " - "TCStatus 0x%lx halt 0x%lx\n", - t->index, read_c0_vpecontrol() & VPECONTROL_TARGTC, - read_tc_c0_tcstatus(), read_tc_c0_tchalt()); - - printk(KERN_DEBUG " tcrestart 0x%lx\n", read_tc_c0_tcrestart()); - printk(KERN_DEBUG " tcbind 0x%lx\n", read_tc_c0_tcbind()); - - val = read_c0_vpeconf0(); - printk(KERN_DEBUG " VPEConf0 0x%lx MVP %ld\n", val, - (val & VPECONF0_MVP) >> VPECONF0_MVP_SHIFT); - - printk(KERN_DEBUG " c0 status 0x%lx\n", read_vpe_c0_status()); - printk(KERN_DEBUG " c0 cause 0x%lx\n", read_vpe_c0_cause()); - - printk(KERN_DEBUG " c0 badvaddr 0x%lx\n", read_vpe_c0_badvaddr()); - printk(KERN_DEBUG " c0 epc 0x%lx\n", read_vpe_c0_epc()); -} - -static void dump_tclist(void) -{ - struct tc *t; - - list_for_each_entry(t, &vpecontrol.tc_list, list) { - dump_tc(t); - } -} - /* We are prepared so configure and start the VPE... */ static int vpe_run(struct vpe * v) { + unsigned long flags, val, dmt_flag; struct vpe_notifications *n; - unsigned long val, dmt_flag; + unsigned int vpeflags; struct tc *t; /* check we are the Master VPE */ + local_irq_save(flags); val = read_c0_vpeconf0(); if (!(val & VPECONF0_MVP)) { printk(KERN_WARNING "VPE loader: only Master VPE's are allowed to configure MT\n"); + local_irq_restore(flags); + return -1; } - /* disable MT (using dvpe) */ - dvpe(); + dmt_flag = dmt(); + vpeflags = dvpe(); if (!list_empty(&v->tc)) { if ((t = list_entry(v->tc.next, struct tc, tc)) == NULL) { - printk(KERN_WARNING "VPE loader: TC %d is already in use.\n", - t->index); + evpe(vpeflags); + emt(dmt_flag); + local_irq_restore(flags); + + printk(KERN_WARNING + "VPE loader: TC %d is already in use.\n", + t->index); return -ENOEXEC; } } else { - printk(KERN_WARNING "VPE loader: No TC's associated with VPE %d\n", + evpe(vpeflags); + emt(dmt_flag); + local_irq_restore(flags); + + printk(KERN_WARNING + "VPE loader: No TC's associated with VPE %d\n", v->minor); + return -ENOEXEC; } @@ -733,21 +709,20 @@ static int vpe_run(struct vpe * v) /* should check it is halted, and not activated */ if ((read_tc_c0_tcstatus() & TCSTATUS_A) || !(read_tc_c0_tchalt() & TCHALT_H)) { - printk(KERN_WARNING "VPE loader: TC %d is already doing something!\n", + evpe(vpeflags); + emt(dmt_flag); + local_irq_restore(flags); + + printk(KERN_WARNING "VPE loader: TC %d is already active!\n", t->index); - dump_tclist(); + return -ENOEXEC; } - /* - * Disable multi-threaded execution whilst we activate, clear the - * halt bit and bound the tc to the other VPE... - */ - dmt_flag = dmt(); - /* Write the address we want it to start running from in the TCPC register. */ write_tc_c0_tcrestart((unsigned long)v->__start); write_tc_c0_tccontext((unsigned long)0); + /* * Mark the TC as activated, not interrupt exempt and not dynamically * allocatable @@ -763,15 +738,14 @@ static int vpe_run(struct vpe * v) * here... Or set $a3 to zero and define DFLT_STACK_SIZE and * DFLT_HEAP_SIZE when you compile your program */ - mttgpr(7, physical_memsize); - + mttgpr(7, physical_memsize); /* set up VPE1 */ /* * bind the TC to VPE 1 as late as possible so we only have the final * VPE registers to set up, and so an EJTAG probe can trigger on it */ - write_tc_c0_tcbind((read_tc_c0_tcbind() & ~TCBIND_CURVPE) | v->minor); + write_tc_c0_tcbind((read_tc_c0_tcbind() & ~TCBIND_CURVPE) | 1); write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~(VPECONF0_VPA)); @@ -793,15 +767,16 @@ static int vpe_run(struct vpe * v) /* take system out of configuration state */ clear_c0_mvpcontrol(MVPCONTROL_VPC); - /* now safe to re-enable multi-threading */ - emt(dmt_flag); - - /* set it running */ +#ifdef CONFIG_SMP evpe(EVPE_ENABLE); +#else + evpe(vpeflags); +#endif + emt(dmt_flag); + local_irq_restore(flags); - list_for_each_entry(n, &v->notify, list) { - n->start(v->minor); - } + list_for_each_entry(n, &v->notify, list) + n->start(minor); return 0; } @@ -1023,23 +998,15 @@ static int vpe_elfload(struct vpe * v) return 0; } -void __used dump_vpe(struct vpe * v) -{ - struct tc *t; - - settc(v->minor); - - printk(KERN_DEBUG "VPEControl 0x%lx\n", read_vpe_c0_vpecontrol()); - printk(KERN_DEBUG "VPEConf0 0x%lx\n", read_vpe_c0_vpeconf0()); - - list_for_each_entry(t, &vpecontrol.tc_list, list) - dump_tc(t); -} - static void cleanup_tc(struct tc *tc) { + unsigned long flags; + unsigned int mtflags, vpflags; int tmp; + local_irq_save(flags); + mtflags = dmt(); + vpflags = dvpe(); /* Put MVPE's into 'configuration state' */ set_c0_mvpcontrol(MVPCONTROL_VPC); @@ -1054,9 +1021,12 @@ static void cleanup_tc(struct tc *tc) write_tc_c0_tchalt(TCHALT_H); /* bind it to anything other than VPE1 */ - write_tc_c0_tcbind(read_tc_c0_tcbind() & ~TCBIND_CURVPE); // | TCBIND_CURVPE +// write_tc_c0_tcbind(read_tc_c0_tcbind() & ~TCBIND_CURVPE); // | TCBIND_CURVPE clear_c0_mvpcontrol(MVPCONTROL_VPC); + evpe(vpflags); + emt(mtflags); + local_irq_restore(flags); } static int getcwd(char *buff, int size) @@ -1077,36 +1047,32 @@ static int getcwd(char *buff, int size) /* checks VPE is unused and gets ready to load program */ static int vpe_open(struct inode *inode, struct file *filp) { - int minor, ret; enum vpe_state state; - struct vpe *v; struct vpe_notifications *not; + struct vpe *v; + int ret; - /* assume only 1 device at the mo. */ - if ((minor = iminor(inode)) != 1) { + if (minor != iminor(inode)) { + /* assume only 1 device at the moment. */ printk(KERN_WARNING "VPE loader: only vpe1 is supported\n"); return -ENODEV; } - if ((v = get_vpe(minor)) == NULL) { + if ((v = get_vpe(tclimit)) == NULL) { printk(KERN_WARNING "VPE loader: unable to get vpe\n"); return -ENODEV; } state = xchg(&v->state, VPE_STATE_INUSE); if (state != VPE_STATE_UNUSED) { - dvpe(); - printk(KERN_DEBUG "VPE loader: tc in use dumping regs\n"); - dump_tc(get_tc(minor)); - list_for_each_entry(not, &v->notify, list) { - not->stop(minor); + not->stop(tclimit); } release_progmem(v->load_addr); - cleanup_tc(get_tc(minor)); + cleanup_tc(get_tc(tclimit)); } /* this of-course trashes what was there before... */ @@ -1133,26 +1099,25 @@ static int vpe_open(struct inode *inode, struct file *filp) v->shared_ptr = NULL; v->__start = 0; + return 0; } static int vpe_release(struct inode *inode, struct file *filp) { - int minor, ret = 0; struct vpe *v; Elf_Ehdr *hdr; + int ret = 0; - minor = iminor(inode); - if ((v = get_vpe(minor)) == NULL) + v = get_vpe(tclimit); + if (v == NULL) return -ENODEV; - // simple case of fire and forget, so tell the VPE to run... - hdr = (Elf_Ehdr *) v->pbuffer; if (memcmp(hdr->e_ident, ELFMAG, 4) == 0) { - if (vpe_elfload(v) >= 0) + if (vpe_elfload(v) >= 0) { vpe_run(v); - else { + } else { printk(KERN_WARNING "VPE loader: ELF load failed.\n"); ret = -ENOEXEC; } @@ -1179,12 +1144,14 @@ static int vpe_release(struct inode *inode, struct file *filp) static ssize_t vpe_write(struct file *file, const char __user * buffer, size_t count, loff_t * ppos) { - int minor; size_t ret = count; struct vpe *v; - minor = iminor(file->f_path.dentry->d_inode); - if ((v = get_vpe(minor)) == NULL) + if (iminor(file->f_path.dentry->d_inode) != minor) + return -ENODEV; + + v = get_vpe(tclimit); + if (v == NULL) return -ENODEV; if (v->pbuffer == NULL) { @@ -1370,17 +1337,34 @@ static struct device *vpe_dev; static int __init vpe_module_init(void) { + unsigned int mtflags, vpflags; + int hw_tcs, hw_vpes, tc, err = 0; + unsigned long flags, val; struct vpe *v = NULL; struct device *dev; struct tc *t; - unsigned long val; - int i, err; if (!cpu_has_mipsmt) { printk("VPE loader: not a MIPS MT capable processor\n"); return -ENODEV; } + if (vpelimit == 0) { + printk(KERN_WARNING "No VPEs reserved for AP/SP, not " + "initializing VPE loader.\nPass maxvpes=<n> argument as " + "kernel argument\n"); + + return -ENODEV; + } + + if (tclimit == 0) { + printk(KERN_WARNING "No TCs reserved for AP/SP, not " + "initializing VPE loader.\nPass maxtcs=<n> argument as " + "kernel argument\n"); + + return -ENODEV; + } + major = register_chrdev(0, module_name, &vpe_fops); if (major < 0) { printk("VPE loader: unable to register character device\n"); @@ -1388,40 +1372,61 @@ static int __init vpe_module_init(void) } dev = device_create(mt_class, NULL, MKDEV(major, minor), - "tc%d", minor); + "vpe%d", minor); if (IS_ERR(dev)) { err = PTR_ERR(dev); goto out_chrdev; } vpe_dev = dev; - dmt(); - dvpe(); + local_irq_save(flags); + mtflags = dmt(); + vpflags = dvpe(); /* Put MVPE's into 'configuration state' */ set_c0_mvpcontrol(MVPCONTROL_VPC); /* dump_mtregs(); */ - val = read_c0_mvpconf0(); - for (i = 0; i < ((val & MVPCONF0_PTC) + 1); i++) { - t = alloc_tc(i); + hw_tcs = (val & MVPCONF0_PTC) + 1; + hw_vpes = ((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1; + + for (tc = tclimit; tc < hw_tcs; tc++) { + /* + * Must re-enable multithreading temporarily or in case we + * reschedule send IPIs or similar we might hang. + */ + clear_c0_mvpcontrol(MVPCONTROL_VPC); + evpe(vpflags); + emt(mtflags); + local_irq_restore(flags); + t = alloc_tc(tc); + if (!t) { + err = -ENOMEM; + goto out; + } + + local_irq_save(flags); + mtflags = dmt(); + vpflags = dvpe(); + set_c0_mvpcontrol(MVPCONTROL_VPC); /* VPE's */ - if (i < ((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1) { - settc(i); + if (tc < hw_tcs) { + settc(tc); - if ((v = alloc_vpe(i)) == NULL) { + if ((v = alloc_vpe(tc)) == NULL) { printk(KERN_WARNING "VPE: unable to allocate VPE\n"); - return -ENODEV; + + goto out_reenable; } /* add the tc to the list of this vpe's tc's. */ list_add(&t->tc, &v->tc); /* deactivate all but vpe0 */ - if (i != 0) { + if (tc >= tclimit) { unsigned long tmp = read_vpe_c0_vpeconf0(); tmp &= ~VPECONF0_VPA; @@ -1434,7 +1439,7 @@ static int __init vpe_module_init(void) /* disable multi-threading with TC's */ write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() & ~VPECONTROL_TE); - if (i != 0) { + if (tc >= vpelimit) { /* * Set config to be the same as vpe0, * particularly kseg0 coherency alg @@ -1446,10 +1451,10 @@ static int __init vpe_module_init(void) /* TC's */ t->pvpe = v; /* set the parent vpe */ - if (i != 0) { + if (tc >= tclimit) { unsigned long tmp; - settc(i); + settc(tc); /* Any TC that is bound to VPE0 gets left as is - in case we are running SMTC on VPE0. A TC that is bound to any @@ -1479,9 +1484,14 @@ static int __init vpe_module_init(void) } } +out_reenable: /* release config state */ clear_c0_mvpcontrol(MVPCONTROL_VPC); + evpe(vpflags); + emt(mtflags); + local_irq_restore(flags); + #ifdef CONFIG_MIPS_APSP_KSPD kspd_events.kspd_sp_exit = kspd_sp_exit; #endif @@ -1490,6 +1500,7 @@ static int __init vpe_module_init(void) out_chrdev: unregister_chrdev(major, module_name); +out: return err; } |