diff options
Diffstat (limited to 'arch/mips')
211 files changed, 8073 insertions, 1748 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 3ca0fe1a912..705a7a9170f 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -6,7 +6,7 @@ config MIPS select HAVE_ARCH_KGDB # Horrible source of confusion. Die, die, die ... select EMBEDDED - select RTC_LIB + select RTC_LIB if !LEMOTE_FULOONG2E mainmenu "Linux/MIPS Kernel Configuration" @@ -80,6 +80,21 @@ config BCM47XX help Support for BCM47XX based boards +config BCM63XX + bool "Broadcom BCM63XX based boards" + select CEVT_R4K + select CSRC_R4K + select DMA_NONCOHERENT + select IRQ_CPU + select SYS_HAS_CPU_MIPS32_R1 + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_HAS_EARLY_PRINTK + select SWAP_IO_SPACE + select ARCH_REQUIRE_GPIOLIB + help + Support for BCM63XX based boards + config MIPS_COBALT bool "Cobalt Server" select CEVT_R4K @@ -174,30 +189,15 @@ config LASAT select SYS_SUPPORTS_64BIT_KERNEL if BROKEN select SYS_SUPPORTS_LITTLE_ENDIAN -config LEMOTE_FULONG - bool "Lemote Fulong mini-PC" - select ARCH_SPARSEMEM_ENABLE - select CEVT_R4K - select CSRC_R4K - select SYS_HAS_CPU_LOONGSON2 - select DMA_NONCOHERENT - select BOOT_ELF32 - select BOARD_SCACHE - select HAVE_STD_PC_SERIAL_PORT - select HW_HAS_PCI - select I8259 - select ISA - select IRQ_CPU - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL - select SYS_SUPPORTS_LITTLE_ENDIAN - select SYS_SUPPORTS_HIGHMEM - select SYS_HAS_EARLY_PRINTK - select GENERIC_ISA_DMA_SUPPORT_BROKEN - select CPU_HAS_WB +config MACH_LOONGSON + bool "Loongson family of machines" help - Lemote Fulong mini-PC board based on the Chinese Loongson-2E CPU and - an FPGA northbridge + This enables the support of Loongson family of machines. + + Loongson is a family of general-purpose MIPS-compatible CPUs. + developed at Institute of Computing Technology (ICT), + Chinese Academy of Sciences (CAS) in the People's Republic + of China. The chief architect is Professor Weiwu Hu. config MIPS_MALTA bool "MIPS Malta board" @@ -660,6 +660,7 @@ endchoice source "arch/mips/alchemy/Kconfig" source "arch/mips/basler/excite/Kconfig" +source "arch/mips/bcm63xx/Kconfig" source "arch/mips/jazz/Kconfig" source "arch/mips/lasat/Kconfig" source "arch/mips/pmc-sierra/Kconfig" @@ -668,6 +669,7 @@ source "arch/mips/sibyte/Kconfig" source "arch/mips/txx9/Kconfig" source "arch/mips/vr41xx/Kconfig" source "arch/mips/cavium-octeon/Kconfig" +source "arch/mips/loongson/Kconfig" endmenu @@ -1044,12 +1046,10 @@ choice prompt "CPU type" default CPU_R4X00 -config CPU_LOONGSON2 - bool "Loongson 2" - depends on SYS_HAS_CPU_LOONGSON2 - select CPU_SUPPORTS_32BIT_KERNEL - select CPU_SUPPORTS_64BIT_KERNEL - select CPU_SUPPORTS_HIGHMEM +config CPU_LOONGSON2E + bool "Loongson 2E" + depends on SYS_HAS_CPU_LOONGSON2E + select CPU_LOONGSON2 help The Loongson 2E processor implements the MIPS III instruction set with many extensions. @@ -1057,7 +1057,6 @@ config CPU_LOONGSON2 config CPU_MIPS32_R1 bool "MIPS32 Release 1" depends on SYS_HAS_CPU_MIPS32_R1 - select CPU_HAS_LLSC select CPU_HAS_PREFETCH select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_HIGHMEM @@ -1075,7 +1074,6 @@ config CPU_MIPS32_R1 config CPU_MIPS32_R2 bool "MIPS32 Release 2" depends on SYS_HAS_CPU_MIPS32_R2 - select CPU_HAS_LLSC select CPU_HAS_PREFETCH select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_HIGHMEM @@ -1089,7 +1087,6 @@ config CPU_MIPS32_R2 config CPU_MIPS64_R1 bool "MIPS64 Release 1" depends on SYS_HAS_CPU_MIPS64_R1 - select CPU_HAS_LLSC select CPU_HAS_PREFETCH select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL @@ -1109,7 +1106,6 @@ config CPU_MIPS64_R1 config CPU_MIPS64_R2 bool "MIPS64 Release 2" depends on SYS_HAS_CPU_MIPS64_R2 - select CPU_HAS_LLSC select CPU_HAS_PREFETCH select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL @@ -1155,7 +1151,6 @@ config CPU_VR41XX config CPU_R4300 bool "R4300" depends on SYS_HAS_CPU_R4300 - select CPU_HAS_LLSC select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL help @@ -1164,7 +1159,6 @@ config CPU_R4300 config CPU_R4X00 bool "R4x00" depends on SYS_HAS_CPU_R4X00 - select CPU_HAS_LLSC select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL help @@ -1174,7 +1168,6 @@ config CPU_R4X00 config CPU_TX49XX bool "R49XX" depends on SYS_HAS_CPU_TX49XX - select CPU_HAS_LLSC select CPU_HAS_PREFETCH select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL @@ -1182,7 +1175,6 @@ config CPU_TX49XX config CPU_R5000 bool "R5000" depends on SYS_HAS_CPU_R5000 - select CPU_HAS_LLSC select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL help @@ -1191,14 +1183,12 @@ config CPU_R5000 config CPU_R5432 bool "R5432" depends on SYS_HAS_CPU_R5432 - select CPU_HAS_LLSC select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL config CPU_R5500 bool "R5500" depends on SYS_HAS_CPU_R5500 - select CPU_HAS_LLSC select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL select CPU_SUPPORTS_HUGEPAGES @@ -1209,7 +1199,6 @@ config CPU_R5500 config CPU_R6000 bool "R6000" depends on EXPERIMENTAL - select CPU_HAS_LLSC depends on SYS_HAS_CPU_R6000 select CPU_SUPPORTS_32BIT_KERNEL help @@ -1219,7 +1208,6 @@ config CPU_R6000 config CPU_NEVADA bool "RM52xx" depends on SYS_HAS_CPU_NEVADA - select CPU_HAS_LLSC select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL help @@ -1229,7 +1217,6 @@ config CPU_R8000 bool "R8000" depends on EXPERIMENTAL depends on SYS_HAS_CPU_R8000 - select CPU_HAS_LLSC select CPU_HAS_PREFETCH select CPU_SUPPORTS_64BIT_KERNEL help @@ -1239,7 +1226,6 @@ config CPU_R8000 config CPU_R10000 bool "R10000" depends on SYS_HAS_CPU_R10000 - select CPU_HAS_LLSC select CPU_HAS_PREFETCH select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL @@ -1250,7 +1236,6 @@ config CPU_R10000 config CPU_RM7000 bool "RM7000" depends on SYS_HAS_CPU_RM7000 - select CPU_HAS_LLSC select CPU_HAS_PREFETCH select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL @@ -1259,7 +1244,6 @@ config CPU_RM7000 config CPU_RM9000 bool "RM9000" depends on SYS_HAS_CPU_RM9000 - select CPU_HAS_LLSC select CPU_HAS_PREFETCH select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL @@ -1269,7 +1253,6 @@ config CPU_RM9000 config CPU_SB1 bool "SB1" depends on SYS_HAS_CPU_SB1 - select CPU_HAS_LLSC select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL select CPU_SUPPORTS_HIGHMEM @@ -1296,7 +1279,13 @@ config CPU_CAVIUM_OCTEON endchoice -config SYS_HAS_CPU_LOONGSON2 +config CPU_LOONGSON2 + bool + select CPU_SUPPORTS_32BIT_KERNEL + select CPU_SUPPORTS_64BIT_KERNEL + select CPU_SUPPORTS_HIGHMEM + +config SYS_HAS_CPU_LOONGSON2E bool config SYS_HAS_CPU_MIPS32_R1 @@ -1683,9 +1672,6 @@ config SB1_PASS_2_1_WORKAROUNDS config 64BIT_PHYS_ADDR bool -config CPU_HAS_LLSC - bool - config CPU_HAS_SMARTMIPS depends on SYS_SUPPORTS_SMARTMIPS bool "Support for the SmartMIPS ASE" diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 861da514a46..77f5021218d 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -120,7 +120,11 @@ cflags-$(CONFIG_CPU_R4300) += -march=r4300 -Wa,--trap cflags-$(CONFIG_CPU_VR41XX) += -march=r4100 -Wa,--trap cflags-$(CONFIG_CPU_R4X00) += -march=r4600 -Wa,--trap cflags-$(CONFIG_CPU_TX49XX) += -march=r4600 -Wa,--trap -cflags-$(CONFIG_CPU_LOONGSON2) += -march=r4600 -Wa,--trap +# only gcc >= 4.4 have the loongson-specific support +cflags-$(CONFIG_CPU_LOONGSON2) += -Wa,--trap +cflags-$(CONFIG_CPU_LOONGSON2E) += \ + $(call cc-option,-march=loongson2e,-march=r4600) + cflags-$(CONFIG_CPU_MIPS32_R1) += $(call cc-option,-march=mips32,-mips32 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \ -Wa,-mips32 -Wa,--trap cflags-$(CONFIG_CPU_MIPS32_R2) += $(call cc-option,-march=mips32r2,-mips32r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \ @@ -314,11 +318,12 @@ cflags-$(CONFIG_WR_PPMC) += -I$(srctree)/arch/mips/include/asm/mach-wrppmc load-$(CONFIG_WR_PPMC) += 0xffffffff80100000 # -# lemote fulong mini-PC board +# Loongson family # -core-$(CONFIG_LEMOTE_FULONG) +=arch/mips/lemote/lm2e/ -load-$(CONFIG_LEMOTE_FULONG) +=0xffffffff80100000 -cflags-$(CONFIG_LEMOTE_FULONG) += -I$(srctree)/arch/mips/include/asm/mach-lemote +core-$(CONFIG_MACH_LOONGSON) +=arch/mips/loongson/ +cflags-$(CONFIG_MACH_LOONGSON) += -I$(srctree)/arch/mips/include/asm/mach-loongson \ + -mno-branch-likely +load-$(CONFIG_LEMOTE_FULOONG2E) +=0xffffffff80100000 # # MIPS Malta board @@ -560,6 +565,13 @@ cflags-$(CONFIG_BCM47XX) += -I$(srctree)/arch/mips/include/asm/mach-bcm47xx load-$(CONFIG_BCM47XX) := 0xffffffff80001000 # +# Broadcom BCM63XX boards +# +core-$(CONFIG_BCM63XX) += arch/mips/bcm63xx/ +cflags-$(CONFIG_BCM63XX) += -I$(srctree)/arch/mips/include/asm/mach-bcm63xx/ +load-$(CONFIG_BCM63XX) := 0xffffffff80010000 + +# # SNI RM # core-$(CONFIG_SNI_RM) += arch/mips/sni/ @@ -615,16 +627,6 @@ endif cflags-y += -I$(srctree)/arch/mips/include/asm/mach-generic drivers-$(CONFIG_PCI) += arch/mips/pci/ -ifdef CONFIG_32BIT -ifdef CONFIG_CPU_LITTLE_ENDIAN -JIFFIES = jiffies_64 -else -JIFFIES = jiffies_64 + 4 -endif -else -JIFFIES = jiffies_64 -endif - # # Automatically detect the build format. By default we choose # the elf format according to the load address. @@ -648,8 +650,9 @@ ifdef CONFIG_64BIT endif KBUILD_AFLAGS += $(cflags-y) -KBUILD_CFLAGS += $(cflags-y) \ - -D"VMLINUX_LOAD_ADDRESS=$(load-y)" +KBUILD_CFLAGS += $(cflags-y) +KBUILD_CPPFLAGS += -D"VMLINUX_LOAD_ADDRESS=$(load-y)" +KBUILD_CPPFLAGS += -D"DATAOFFSET=$(if $(dataoffset-y),$(dataoffset-y),0)" LDFLAGS += -m $(ld-emul) @@ -664,18 +667,6 @@ endif OBJCOPYFLAGS += --remove-section=.reginfo -# -# Choosing incompatible machines durings configuration will result in -# error messages during linking. Select a default linkscript if -# none has been choosen above. -# - -CPPFLAGS_vmlinux.lds := \ - $(KBUILD_CFLAGS) \ - -D"LOADADDR=$(load-y)" \ - -D"JIFFIES=$(JIFFIES)" \ - -D"DATAOFFSET=$(if $(dataoffset-y),$(dataoffset-y),0)" - head-y := arch/mips/kernel/head.o arch/mips/kernel/init_task.o libs-y += arch/mips/lib/ diff --git a/arch/mips/alchemy/common/setup.c b/arch/mips/alchemy/common/setup.c index 3f036b3d400..6184baa5678 100644 --- a/arch/mips/alchemy/common/setup.c +++ b/arch/mips/alchemy/common/setup.c @@ -27,6 +27,7 @@ #include <linux/init.h> #include <linux/ioport.h> +#include <linux/jiffies.h> #include <linux/module.h> #include <linux/pm.h> @@ -53,6 +54,9 @@ void __init plat_mem_setup(void) printk(KERN_INFO "(PRId %08x) @ %lu.%02lu MHz\n", read_c0_prid(), est_freq / 1000000, ((est_freq % 1000000) * 100) / 1000000); + /* this is faster than wasting cycles trying to approximate it */ + preset_lpj = (est_freq >> 1) / HZ; + _machine_restart = au1000_restart; _machine_halt = au1000_halt; pm_power_off = au1000_power_off; diff --git a/arch/mips/alchemy/common/time.c b/arch/mips/alchemy/common/time.c index 33fbae79af5..379a664809b 100644 --- a/arch/mips/alchemy/common/time.c +++ b/arch/mips/alchemy/common/time.c @@ -36,14 +36,13 @@ #include <linux/interrupt.h> #include <linux/spinlock.h> +#include <asm/processor.h> #include <asm/time.h> #include <asm/mach-au1x00/au1000.h> /* 32kHz clock enabled and detected */ #define CNTR_OK (SYS_CNTRL_E0 | SYS_CNTRL_32S) -extern int allow_au1k_wait; /* default off for CP0 Counter */ - static cycle_t au1x_counter1_read(struct clocksource *cs) { return au_readl(SYS_RTCREAD); @@ -89,7 +88,7 @@ static struct clock_event_device au1x_rtcmatch2_clockdev = { .irq = AU1000_RTC_MATCH2_INT, .set_next_event = au1x_rtcmatch2_set_next_event, .set_mode = au1x_rtcmatch2_set_mode, - .cpumask = CPU_MASK_ALL_PTR, + .cpumask = cpu_all_mask, }; static struct irqaction au1x_rtcmatch2_irqaction = { @@ -153,13 +152,17 @@ void __init plat_time_init(void) printk(KERN_INFO "Alchemy clocksource installed\n"); - /* can now use 'wait' */ - allow_au1k_wait = 1; return; cntr_err: - /* counters unusable, use C0 counter */ + /* + * MIPS kernel assigns 'au1k_wait' to 'cpu_wait' before this + * function is called. Because the Alchemy counters are unusable + * the C0 timekeeping code is installed and use of the 'wait' + * instruction must be prohibited, which is done most easily by + * assigning NULL to cpu_wait. + */ + cpu_wait = NULL; r4k_clockevent_init(); init_r4k_clocksource(); - allow_au1k_wait = 0; } diff --git a/arch/mips/ar7/platform.c b/arch/mips/ar7/platform.c index cf50fa29b19..e2278c04459 100644 --- a/arch/mips/ar7/platform.c +++ b/arch/mips/ar7/platform.c @@ -417,6 +417,20 @@ static struct platform_device ar7_udc = { .num_resources = ARRAY_SIZE(usb_res), }; +static struct resource ar7_wdt_res = { + .name = "regs", + .start = -1, /* Filled at runtime */ + .end = -1, /* Filled at runtime */ + .flags = IORESOURCE_MEM, +}; + +static struct platform_device ar7_wdt = { + .id = -1, + .name = "ar7_wdt", + .resource = &ar7_wdt_res, + .num_resources = 1, +}; + static inline unsigned char char2hex(char h) { switch (h) { @@ -487,6 +501,7 @@ static void __init detect_leds(void) static int __init ar7_register_devices(void) { + u16 chip_id; int res; #ifdef CONFIG_SERIAL_8250 static struct uart_port uart_port[2]; @@ -565,6 +580,23 @@ static int __init ar7_register_devices(void) res = platform_device_register(&ar7_udc); + chip_id = ar7_chip_id(); + switch (chip_id) { + case AR7_CHIP_7100: + case AR7_CHIP_7200: + ar7_wdt_res.start = AR7_REGS_WDT; + break; + case AR7_CHIP_7300: + ar7_wdt_res.start = UR8_REGS_WDT; + break; + default: + break; + } + + ar7_wdt_res.end = ar7_wdt_res.start + 0x20; + + res = platform_device_register(&ar7_wdt); + return res; } arch_initcall(ar7_register_devices); diff --git a/arch/mips/bcm63xx/Kconfig b/arch/mips/bcm63xx/Kconfig new file mode 100644 index 00000000000..fb177d6df06 --- /dev/null +++ b/arch/mips/bcm63xx/Kconfig @@ -0,0 +1,25 @@ +menu "CPU support" + depends on BCM63XX + +config BCM63XX_CPU_6338 + bool "support 6338 CPU" + select HW_HAS_PCI + select USB_ARCH_HAS_OHCI + select USB_OHCI_BIG_ENDIAN_DESC + select USB_OHCI_BIG_ENDIAN_MMIO + +config BCM63XX_CPU_6345 + bool "support 6345 CPU" + select USB_OHCI_BIG_ENDIAN_DESC + select USB_OHCI_BIG_ENDIAN_MMIO + +config BCM63XX_CPU_6348 + bool "support 6348 CPU" + select HW_HAS_PCI + +config BCM63XX_CPU_6358 + bool "support 6358 CPU" + select HW_HAS_PCI +endmenu + +source "arch/mips/bcm63xx/boards/Kconfig" diff --git a/arch/mips/bcm63xx/Makefile b/arch/mips/bcm63xx/Makefile new file mode 100644 index 00000000000..aaa585cf26e --- /dev/null +++ b/arch/mips/bcm63xx/Makefile @@ -0,0 +1,7 @@ +obj-y += clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \ + dev-dsp.o dev-enet.o +obj-$(CONFIG_EARLY_PRINTK) += early_printk.o + +obj-y += boards/ + +EXTRA_CFLAGS += -Werror diff --git a/arch/mips/bcm63xx/boards/Kconfig b/arch/mips/bcm63xx/boards/Kconfig new file mode 100644 index 00000000000..c6aed33d893 --- /dev/null +++ b/arch/mips/bcm63xx/boards/Kconfig @@ -0,0 +1,11 @@ +choice + prompt "Board support" + depends on BCM63XX + default BOARD_BCM963XX + +config BOARD_BCM963XX + bool "Generic Broadcom 963xx boards" + select SSB + help + +endchoice diff --git a/arch/mips/bcm63xx/boards/Makefile b/arch/mips/bcm63xx/boards/Makefile new file mode 100644 index 00000000000..e5cc86dc1da --- /dev/null +++ b/arch/mips/bcm63xx/boards/Makefile @@ -0,0 +1,3 @@ +obj-$(CONFIG_BOARD_BCM963XX) += board_bcm963xx.o + +EXTRA_CFLAGS += -Werror diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c new file mode 100644 index 00000000000..fd77f548207 --- /dev/null +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c @@ -0,0 +1,837 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> + * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org> + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/ssb/ssb.h> +#include <asm/addrspace.h> +#include <bcm63xx_board.h> +#include <bcm63xx_cpu.h> +#include <bcm63xx_regs.h> +#include <bcm63xx_io.h> +#include <bcm63xx_board.h> +#include <bcm63xx_dev_pci.h> +#include <bcm63xx_dev_enet.h> +#include <bcm63xx_dev_dsp.h> +#include <board_bcm963xx.h> + +#define PFX "board_bcm963xx: " + +static struct bcm963xx_nvram nvram; +static unsigned int mac_addr_used; +static struct board_info board; + +/* + * known 6338 boards + */ +#ifdef CONFIG_BCM63XX_CPU_6338 +static struct board_info __initdata board_96338gw = { + .name = "96338GW", + .expected_cpu_id = 0x6338, + + .has_enet0 = 1, + .enet0 = { + .force_speed_100 = 1, + .force_duplex_full = 1, + }, + + .has_ohci0 = 1, + + .leds = { + { + .name = "adsl", + .gpio = 3, + .active_low = 1, + }, + { + .name = "ses", + .gpio = 5, + .active_low = 1, + }, + { + .name = "ppp-fail", + .gpio = 4, + .active_low = 1, + }, + { + .name = "power", + .gpio = 0, + .active_low = 1, + .default_trigger = "default-on", + }, + { + .name = "stop", + .gpio = 1, + .active_low = 1, + } + }, +}; + +static struct board_info __initdata board_96338w = { + .name = "96338W", + .expected_cpu_id = 0x6338, + + .has_enet0 = 1, + .enet0 = { + .force_speed_100 = 1, + .force_duplex_full = 1, + }, + + .leds = { + { + .name = "adsl", + .gpio = 3, + .active_low = 1, + }, + { + .name = "ses", + .gpio = 5, + .active_low = 1, + }, + { + .name = "ppp-fail", + .gpio = 4, + .active_low = 1, + }, + { + .name = "power", + .gpio = 0, + .active_low = 1, + .default_trigger = "default-on", + }, + { + .name = "stop", + .gpio = 1, + .active_low = 1, + }, + }, +}; +#endif + +/* + * known 6345 boards + */ +#ifdef CONFIG_BCM63XX_CPU_6345 +static struct board_info __initdata board_96345gw2 = { + .name = "96345GW2", + .expected_cpu_id = 0x6345, +}; +#endif + +/* + * known 6348 boards + */ +#ifdef CONFIG_BCM63XX_CPU_6348 +static struct board_info __initdata board_96348r = { + .name = "96348R", + .expected_cpu_id = 0x6348, + + .has_enet0 = 1, + .has_pci = 1, + + .enet0 = { + .has_phy = 1, + .use_internal_phy = 1, + }, + + .leds = { + { + .name = "adsl-fail", + .gpio = 2, + .active_low = 1, + }, + { + .name = "ppp", + .gpio = 3, + .active_low = 1, + }, + { + .name = "ppp-fail", + .gpio = 4, + .active_low = 1, + }, + { + .name = "power", + .gpio = 0, + .active_low = 1, + .default_trigger = "default-on", + + }, + { + .name = "stop", + .gpio = 1, + .active_low = 1, + }, + }, +}; + +static struct board_info __initdata board_96348gw_10 = { + .name = "96348GW-10", + .expected_cpu_id = 0x6348, + + .has_enet0 = 1, + .has_enet1 = 1, + .has_pci = 1, + + .enet0 = { + .has_phy = 1, + .use_internal_phy = 1, + }, + .enet1 = { + .force_speed_100 = 1, + .force_duplex_full = 1, + }, + + .has_ohci0 = 1, + .has_pccard = 1, + .has_ehci0 = 1, + + .has_dsp = 1, + .dsp = { + .gpio_rst = 6, + .gpio_int = 34, + .cs = 2, + .ext_irq = 2, + }, + + .leds = { + { + .name = "adsl-fail", + .gpio = 2, + .active_low = 1, + }, + { + .name = "ppp", + .gpio = 3, + .active_low = 1, + }, + { + .name = "ppp-fail", + .gpio = 4, + .active_low = 1, + }, + { + .name = "power", + .gpio = 0, + .active_low = 1, + .default_trigger = "default-on", + }, + { + .name = "stop", + .gpio = 1, + .active_low = 1, + }, + }, +}; + +static struct board_info __initdata board_96348gw_11 = { + .name = "96348GW-11", + .expected_cpu_id = 0x6348, + + .has_enet0 = 1, + .has_enet1 = 1, + .has_pci = 1, + + .enet0 = { + .has_phy = 1, + .use_internal_phy = 1, + }, + + .enet1 = { + .force_speed_100 = 1, + .force_duplex_full = 1, + }, + + + .has_ohci0 = 1, + .has_pccard = 1, + .has_ehci0 = 1, + + .leds = { + { + .name = "adsl-fail", + .gpio = 2, + .active_low = 1, + }, + { + .name = "ppp", + .gpio = 3, + .active_low = 1, + }, + { + .name = "ppp-fail", + .gpio = 4, + .active_low = 1, + }, + { + .name = "power", + .gpio = 0, + .active_low = 1, + .default_trigger = "default-on", + }, + { + .name = "stop", + .gpio = 1, + .active_low = 1, + }, + }, +}; + +static struct board_info __initdata board_96348gw = { + .name = "96348GW", + .expected_cpu_id = 0x6348, + + .has_enet0 = 1, + .has_enet1 = 1, + .has_pci = 1, + + .enet0 = { + .has_phy = 1, + .use_internal_phy = 1, + }, + .enet1 = { + .force_speed_100 = 1, + .force_duplex_full = 1, + }, + + .has_ohci0 = 1, + + .has_dsp = 1, + .dsp = { + .gpio_rst = 6, + .gpio_int = 34, + .ext_irq = 2, + .cs = 2, + }, + + .leds = { + { + .name = "adsl-fail", + .gpio = 2, + .active_low = 1, + }, + { + .name = "ppp", + .gpio = 3, + .active_low = 1, + }, + { + .name = "ppp-fail", + .gpio = 4, + .active_low = 1, + }, + { + .name = "power", + .gpio = 0, + .active_low = 1, + .default_trigger = "default-on", + }, + { + .name = "stop", + .gpio = 1, + .active_low = 1, + }, + }, +}; + +static struct board_info __initdata board_FAST2404 = { + .name = "F@ST2404", + .expected_cpu_id = 0x6348, + + .has_enet0 = 1, + .has_enet1 = 1, + .has_pci = 1, + + .enet0 = { + .has_phy = 1, + .use_internal_phy = 1, + }, + + .enet1 = { + .force_speed_100 = 1, + .force_duplex_full = 1, + }, + + + .has_ohci0 = 1, + .has_pccard = 1, + .has_ehci0 = 1, +}; + +static struct board_info __initdata board_DV201AMR = { + .name = "DV201AMR", + .expected_cpu_id = 0x6348, + + .has_pci = 1, + .has_ohci0 = 1, + + .has_enet0 = 1, + .has_enet1 = 1, + .enet0 = { + .has_phy = 1, + .use_internal_phy = 1, + }, + .enet1 = { + .force_speed_100 = 1, + .force_duplex_full = 1, + }, +}; + +static struct board_info __initdata board_96348gw_a = { + .name = "96348GW-A", + .expected_cpu_id = 0x6348, + + .has_enet0 = 1, + .has_enet1 = 1, + .has_pci = 1, + + .enet0 = { + .has_phy = 1, + .use_internal_phy = 1, + }, + .enet1 = { + .force_speed_100 = 1, + .force_duplex_full = 1, + }, + + .has_ohci0 = 1, +}; +#endif + +/* + * known 6358 boards + */ +#ifdef CONFIG_BCM63XX_CPU_6358 +static struct board_info __initdata board_96358vw = { + .name = "96358VW", + .expected_cpu_id = 0x6358, + + .has_enet0 = 1, + .has_enet1 = 1, + .has_pci = 1, + + .enet0 = { + .has_phy = 1, + .use_internal_phy = 1, + }, + + .enet1 = { + .force_speed_100 = 1, + .force_duplex_full = 1, + }, + + + .has_ohci0 = 1, + .has_pccard = 1, + .has_ehci0 = 1, + + .leds = { + { + .name = "adsl-fail", + .gpio = 15, + .active_low = 1, + }, + { + .name = "ppp", + .gpio = 22, + .active_low = 1, + }, + { + .name = "ppp-fail", + .gpio = 23, + .active_low = 1, + }, + { + .name = "power", + .gpio = 4, + .default_trigger = "default-on", + }, + { + .name = "stop", + .gpio = 5, + }, + }, +}; + +static struct board_info __initdata board_96358vw2 = { + .name = "96358VW2", + .expected_cpu_id = 0x6358, + + .has_enet0 = 1, + .has_enet1 = 1, + .has_pci = 1, + + .enet0 = { + .has_phy = 1, + .use_internal_phy = 1, + }, + + .enet1 = { + .force_speed_100 = 1, + .force_duplex_full = 1, + }, + + + .has_ohci0 = 1, + .has_pccard = 1, + .has_ehci0 = 1, + + .leds = { + { + .name = "adsl", + .gpio = 22, + .active_low = 1, + }, + { + .name = "ppp-fail", + .gpio = 23, + }, + { + .name = "power", + .gpio = 5, + .active_low = 1, + .default_trigger = "default-on", + }, + { + .name = "stop", + .gpio = 4, + .active_low = 1, + }, + }, +}; + +static struct board_info __initdata board_AGPFS0 = { + .name = "AGPF-S0", + .expected_cpu_id = 0x6358, + + .has_enet0 = 1, + .has_enet1 = 1, + .has_pci = 1, + + .enet0 = { + .has_phy = 1, + .use_internal_phy = 1, + }, + + .enet1 = { + .force_speed_100 = 1, + .force_duplex_full = 1, + }, + + .has_ohci0 = 1, + .has_ehci0 = 1, +}; +#endif + +/* + * all boards + */ +static const struct board_info __initdata *bcm963xx_boards[] = { +#ifdef CONFIG_BCM63XX_CPU_6338 + &board_96338gw, + &board_96338w, +#endif +#ifdef CONFIG_BCM63XX_CPU_6345 + &board_96345gw2, +#endif +#ifdef CONFIG_BCM63XX_CPU_6348 + &board_96348r, + &board_96348gw, + &board_96348gw_10, + &board_96348gw_11, + &board_FAST2404, + &board_DV201AMR, + &board_96348gw_a, +#endif + +#ifdef CONFIG_BCM63XX_CPU_6358 + &board_96358vw, + &board_96358vw2, + &board_AGPFS0, +#endif +}; + +/* + * early init callback, read nvram data from flash and checksum it + */ +void __init board_prom_init(void) +{ + unsigned int check_len, i; + u8 *boot_addr, *cfe, *p; + char cfe_version[32]; + u32 val; + + /* read base address of boot chip select (0) + * 6345 does not have MPI but boots from standard + * MIPS Flash address */ + if (BCMCPU_IS_6345()) + val = 0x1fc00000; + else { + val = bcm_mpi_readl(MPI_CSBASE_REG(0)); + val &= MPI_CSBASE_BASE_MASK; + } + boot_addr = (u8 *)KSEG1ADDR(val); + + /* dump cfe version */ + cfe = boot_addr + BCM963XX_CFE_VERSION_OFFSET; + if (!memcmp(cfe, "cfe-v", 5)) + snprintf(cfe_version, sizeof(cfe_version), "%u.%u.%u-%u.%u", + cfe[5], cfe[6], cfe[7], cfe[8], cfe[9]); + else + strcpy(cfe_version, "unknown"); + printk(KERN_INFO PFX "CFE version: %s\n", cfe_version); + + /* extract nvram data */ + memcpy(&nvram, boot_addr + BCM963XX_NVRAM_OFFSET, sizeof(nvram)); + + /* check checksum before using data */ + if (nvram.version <= 4) + check_len = offsetof(struct bcm963xx_nvram, checksum_old); + else + check_len = sizeof(nvram); + val = 0; + p = (u8 *)&nvram; + while (check_len--) + val += *p; + if (val) { + printk(KERN_ERR PFX "invalid nvram checksum\n"); + return; + } + + /* find board by name */ + for (i = 0; i < ARRAY_SIZE(bcm963xx_boards); i++) { + if (strncmp(nvram.name, bcm963xx_boards[i]->name, + sizeof(nvram.name))) + continue; + /* copy, board desc array is marked initdata */ + memcpy(&board, bcm963xx_boards[i], sizeof(board)); + break; + } + + /* bail out if board is not found, will complain later */ + if (!board.name[0]) { + char name[17]; + memcpy(name, nvram.name, 16); + name[16] = 0; + printk(KERN_ERR PFX "unknown bcm963xx board: %s\n", + name); + return; + } + + /* setup pin multiplexing depending on board enabled device, + * this has to be done this early since PCI init is done + * inside arch_initcall */ + val = 0; + +#ifdef CONFIG_PCI + if (board.has_pci) { + bcm63xx_pci_enabled = 1; + if (BCMCPU_IS_6348()) + val |= GPIO_MODE_6348_G2_PCI; + } +#endif + + if (board.has_pccard) { + if (BCMCPU_IS_6348()) + val |= GPIO_MODE_6348_G1_MII_PCCARD; + } + + if (board.has_enet0 && !board.enet0.use_internal_phy) { + if (BCMCPU_IS_6348()) + val |= GPIO_MODE_6348_G3_EXT_MII | + GPIO_MODE_6348_G0_EXT_MII; + } + + if (board.has_enet1 && !board.enet1.use_internal_phy) { + if (BCMCPU_IS_6348()) + val |= GPIO_MODE_6348_G3_EXT_MII | + GPIO_MODE_6348_G0_EXT_MII; + } + + bcm_gpio_writel(val, GPIO_MODE_REG); +} + +/* + * second stage init callback, good time to panic if we couldn't + * identify on which board we're running since early printk is working + */ +void __init board_setup(void) +{ + if (!board.name[0]) + panic("unable to detect bcm963xx board"); + printk(KERN_INFO PFX "board name: %s\n", board.name); + + /* make sure we're running on expected cpu */ + if (bcm63xx_get_cpu_id() != board.expected_cpu_id) + panic("unexpected CPU for bcm963xx board"); +} + +/* + * return board name for /proc/cpuinfo + */ +const char *board_get_name(void) +{ + return board.name; +} + +/* + * register & return a new board mac address + */ +static int board_get_mac_address(u8 *mac) +{ + u8 *p; + int count; + + if (mac_addr_used >= nvram.mac_addr_count) { + printk(KERN_ERR PFX "not enough mac address\n"); + return -ENODEV; + } + + memcpy(mac, nvram.mac_addr_base, ETH_ALEN); + p = mac + ETH_ALEN - 1; + count = mac_addr_used; + + while (count--) { + do { + (*p)++; + if (*p != 0) + break; + p--; + } while (p != mac); + } + + if (p == mac) { + printk(KERN_ERR PFX "unable to fetch mac address\n"); + return -ENODEV; + } + + mac_addr_used++; + return 0; +} + +static struct mtd_partition mtd_partitions[] = { + { + .name = "cfe", + .offset = 0x0, + .size = 0x40000, + } +}; + +static struct physmap_flash_data flash_data = { + .width = 2, + .nr_parts = ARRAY_SIZE(mtd_partitions), + .parts = mtd_partitions, +}; + +static struct resource mtd_resources[] = { + { + .start = 0, /* filled at runtime */ + .end = 0, /* filled at runtime */ + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device mtd_dev = { + .name = "physmap-flash", + .resource = mtd_resources, + .num_resources = ARRAY_SIZE(mtd_resources), + .dev = { + .platform_data = &flash_data, + }, +}; + +/* + * Register a sane SPROMv2 to make the on-board + * bcm4318 WLAN work + */ +#ifdef CONFIG_SSB_PCIHOST +static struct ssb_sprom bcm63xx_sprom = { + .revision = 0x02, + .board_rev = 0x17, + .country_code = 0x0, + .ant_available_bg = 0x3, + .pa0b0 = 0x15ae, + .pa0b1 = 0xfa85, + .pa0b2 = 0xfe8d, + .pa1b0 = 0xffff, + .pa1b1 = 0xffff, + .pa1b2 = 0xffff, + .gpio0 = 0xff, + .gpio1 = 0xff, + .gpio2 = 0xff, + .gpio3 = 0xff, + .maxpwr_bg = 0x004c, + .itssi_bg = 0x00, + .boardflags_lo = 0x2848, + .boardflags_hi = 0x0000, +}; +#endif + +static struct gpio_led_platform_data bcm63xx_led_data; + +static struct platform_device bcm63xx_gpio_leds = { + .name = "leds-gpio", + .id = 0, + .dev.platform_data = &bcm63xx_led_data, +}; + +/* + * third stage init callback, register all board devices. + */ +int __init board_register_devices(void) +{ + u32 val; + + if (board.has_enet0 && + !board_get_mac_address(board.enet0.mac_addr)) + bcm63xx_enet_register(0, &board.enet0); + + if (board.has_enet1 && + !board_get_mac_address(board.enet1.mac_addr)) + bcm63xx_enet_register(1, &board.enet1); + + if (board.has_dsp) + bcm63xx_dsp_register(&board.dsp); + + /* Generate MAC address for WLAN and + * register our SPROM */ +#ifdef CONFIG_SSB_PCIHOST + if (!board_get_mac_address(bcm63xx_sprom.il0mac)) { + memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN); + memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN); + if (ssb_arch_set_fallback_sprom(&bcm63xx_sprom) < 0) + printk(KERN_ERR "failed to register fallback SPROM\n"); + } +#endif + + /* read base address of boot chip select (0) */ + if (BCMCPU_IS_6345()) + val = 0x1fc00000; + else { + val = bcm_mpi_readl(MPI_CSBASE_REG(0)); + val &= MPI_CSBASE_BASE_MASK; + } + mtd_resources[0].start = val; + mtd_resources[0].end = 0x1FFFFFFF; + + platform_device_register(&mtd_dev); + + bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds); + bcm63xx_led_data.leds = board.leds; + + platform_device_register(&bcm63xx_gpio_leds); + + return 0; +} + diff --git a/arch/mips/bcm63xx/clk.c b/arch/mips/bcm63xx/clk.c new file mode 100644 index 00000000000..2c68ee9ccee --- /dev/null +++ b/arch/mips/bcm63xx/clk.c @@ -0,0 +1,226 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> + */ + +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <bcm63xx_cpu.h> +#include <bcm63xx_io.h> +#include <bcm63xx_regs.h> +#include <bcm63xx_clk.h> + +static DEFINE_MUTEX(clocks_mutex); + + +static void clk_enable_unlocked(struct clk *clk) +{ + if (clk->set && (clk->usage++) == 0) + clk->set(clk, 1); +} + +static void clk_disable_unlocked(struct clk *clk) +{ + if (clk->set && (--clk->usage) == 0) + clk->set(clk, 0); +} + +static void bcm_hwclock_set(u32 mask, int enable) +{ + u32 reg; + + reg = bcm_perf_readl(PERF_CKCTL_REG); + if (enable) + reg |= mask; + else + reg &= ~mask; + bcm_perf_writel(reg, PERF_CKCTL_REG); +} + +/* + * Ethernet MAC "misc" clock: dma clocks and main clock on 6348 + */ +static void enet_misc_set(struct clk *clk, int enable) +{ + u32 mask; + + if (BCMCPU_IS_6338()) + mask = CKCTL_6338_ENET_EN; + else if (BCMCPU_IS_6345()) + mask = CKCTL_6345_ENET_EN; + else if (BCMCPU_IS_6348()) + mask = CKCTL_6348_ENET_EN; + else + /* BCMCPU_IS_6358 */ + mask = CKCTL_6358_EMUSB_EN; + bcm_hwclock_set(mask, enable); +} + +static struct clk clk_enet_misc = { + .set = enet_misc_set, +}; + +/* + * Ethernet MAC clocks: only revelant on 6358, silently enable misc + * clocks + */ +static void enetx_set(struct clk *clk, int enable) +{ + if (enable) + clk_enable_unlocked(&clk_enet_misc); + else + clk_disable_unlocked(&clk_enet_misc); + + if (BCMCPU_IS_6358()) { + u32 mask; + + if (clk->id == 0) + mask = CKCTL_6358_ENET0_EN; + else + mask = CKCTL_6358_ENET1_EN; + bcm_hwclock_set(mask, enable); + } +} + +static struct clk clk_enet0 = { + .id = 0, + .set = enetx_set, +}; + +static struct clk clk_enet1 = { + .id = 1, + .set = enetx_set, +}; + +/* + * Ethernet PHY clock + */ +static void ephy_set(struct clk *clk, int enable) +{ + if (!BCMCPU_IS_6358()) + return; + bcm_hwclock_set(CKCTL_6358_EPHY_EN, enable); +} + + +static struct clk clk_ephy = { + .set = ephy_set, +}; + +/* + * PCM clock + */ +static void pcm_set(struct clk *clk, int enable) +{ + if (!BCMCPU_IS_6358()) + return; + bcm_hwclock_set(CKCTL_6358_PCM_EN, enable); +} + +static struct clk clk_pcm = { + .set = pcm_set, +}; + +/* + * USB host clock + */ +static void usbh_set(struct clk *clk, int enable) +{ + if (!BCMCPU_IS_6348()) + return; + bcm_hwclock_set(CKCTL_6348_USBH_EN, enable); +} + +static struct clk clk_usbh = { + .set = usbh_set, +}; + +/* + * SPI clock + */ +static void spi_set(struct clk *clk, int enable) +{ + u32 mask; + + if (BCMCPU_IS_6338()) + mask = CKCTL_6338_SPI_EN; + else if (BCMCPU_IS_6348()) + mask = CKCTL_6348_SPI_EN; + else + /* BCMCPU_IS_6358 */ + mask = CKCTL_6358_SPI_EN; + bcm_hwclock_set(mask, enable); +} + +static struct clk clk_spi = { + .set = spi_set, +}; + +/* + * Internal peripheral clock + */ +static struct clk clk_periph = { + .rate = (50 * 1000 * 1000), +}; + + +/* + * Linux clock API implementation + */ +int clk_enable(struct clk *clk) +{ + mutex_lock(&clocks_mutex); + clk_enable_unlocked(clk); + mutex_unlock(&clocks_mutex); + return 0; +} + +EXPORT_SYMBOL(clk_enable); + +void clk_disable(struct clk *clk) +{ + mutex_lock(&clocks_mutex); + clk_disable_unlocked(clk); + mutex_unlock(&clocks_mutex); +} + +EXPORT_SYMBOL(clk_disable); + +unsigned long clk_get_rate(struct clk *clk) +{ + return clk->rate; +} + +EXPORT_SYMBOL(clk_get_rate); + +struct clk *clk_get(struct device *dev, const char *id) +{ + if (!strcmp(id, "enet0")) + return &clk_enet0; + if (!strcmp(id, "enet1")) + return &clk_enet1; + if (!strcmp(id, "ephy")) + return &clk_ephy; + if (!strcmp(id, "usbh")) + return &clk_usbh; + if (!strcmp(id, "spi")) + return &clk_spi; + if (!strcmp(id, "periph")) + return &clk_periph; + if (BCMCPU_IS_6358() && !strcmp(id, "pcm")) + return &clk_pcm; + return ERR_PTR(-ENOENT); +} + +EXPORT_SYMBOL(clk_get); + +void clk_put(struct clk *clk) +{ +} + +EXPORT_SYMBOL(clk_put); diff --git a/arch/mips/bcm63xx/cpu.c b/arch/mips/bcm63xx/cpu.c new file mode 100644 index 00000000000..6dc43f0483e --- /dev/null +++ b/arch/mips/bcm63xx/cpu.c @@ -0,0 +1,345 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> + * Copyright (C) 2009 Florian Fainelli <florian@openwrt.org> + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/cpu.h> +#include <bcm63xx_cpu.h> +#include <bcm63xx_regs.h> +#include <bcm63xx_io.h> +#include <bcm63xx_irq.h> + +const unsigned long *bcm63xx_regs_base; +EXPORT_SYMBOL(bcm63xx_regs_base); + +const int *bcm63xx_irqs; +EXPORT_SYMBOL(bcm63xx_irqs); + +static u16 bcm63xx_cpu_id; +static u16 bcm63xx_cpu_rev; +static unsigned int bcm63xx_cpu_freq; +static unsigned int bcm63xx_memory_size; + +/* + * 6338 register sets and irqs + */ +static const unsigned long bcm96338_regs_base[] = { + [RSET_DSL_LMEM] = BCM_6338_DSL_LMEM_BASE, + [RSET_PERF] = BCM_6338_PERF_BASE, + [RSET_TIMER] = BCM_6338_TIMER_BASE, + [RSET_WDT] = BCM_6338_WDT_BASE, + [RSET_UART0] = BCM_6338_UART0_BASE, + [RSET_GPIO] = BCM_6338_GPIO_BASE, + [RSET_SPI] = BCM_6338_SPI_BASE, + [RSET_OHCI0] = BCM_6338_OHCI0_BASE, + [RSET_OHCI_PRIV] = BCM_6338_OHCI_PRIV_BASE, + [RSET_USBH_PRIV] = BCM_6338_USBH_PRIV_BASE, + [RSET_UDC0] = BCM_6338_UDC0_BASE, + [RSET_MPI] = BCM_6338_MPI_BASE, + [RSET_PCMCIA] = BCM_6338_PCMCIA_BASE, + [RSET_SDRAM] = BCM_6338_SDRAM_BASE, + [RSET_DSL] = BCM_6338_DSL_BASE, + [RSET_ENET0] = BCM_6338_ENET0_BASE, + [RSET_ENET1] = BCM_6338_ENET1_BASE, + [RSET_ENETDMA] = BCM_6338_ENETDMA_BASE, + [RSET_MEMC] = BCM_6338_MEMC_BASE, + [RSET_DDR] = BCM_6338_DDR_BASE, +}; + +static const int bcm96338_irqs[] = { + [IRQ_TIMER] = BCM_6338_TIMER_IRQ, + [IRQ_UART0] = BCM_6338_UART0_IRQ, + [IRQ_DSL] = BCM_6338_DSL_IRQ, + [IRQ_ENET0] = BCM_6338_ENET0_IRQ, + [IRQ_ENET_PHY] = BCM_6338_ENET_PHY_IRQ, + [IRQ_ENET0_RXDMA] = BCM_6338_ENET0_RXDMA_IRQ, + [IRQ_ENET0_TXDMA] = BCM_6338_ENET0_TXDMA_IRQ, +}; + +/* + * 6345 register sets and irqs + */ +static const unsigned long bcm96345_regs_base[] = { + [RSET_DSL_LMEM] = BCM_6345_DSL_LMEM_BASE, + [RSET_PERF] = BCM_6345_PERF_BASE, + [RSET_TIMER] = BCM_6345_TIMER_BASE, + [RSET_WDT] = BCM_6345_WDT_BASE, + [RSET_UART0] = BCM_6345_UART0_BASE, + [RSET_GPIO] = BCM_6345_GPIO_BASE, + [RSET_SPI] = BCM_6345_SPI_BASE, + [RSET_UDC0] = BCM_6345_UDC0_BASE, + [RSET_OHCI0] = BCM_6345_OHCI0_BASE, + [RSET_OHCI_PRIV] = BCM_6345_OHCI_PRIV_BASE, + [RSET_USBH_PRIV] = BCM_6345_USBH_PRIV_BASE, + [RSET_MPI] = BCM_6345_MPI_BASE, + [RSET_PCMCIA] = BCM_6345_PCMCIA_BASE, + [RSET_DSL] = BCM_6345_DSL_BASE, + [RSET_ENET0] = BCM_6345_ENET0_BASE, + [RSET_ENET1] = BCM_6345_ENET1_BASE, + [RSET_ENETDMA] = BCM_6345_ENETDMA_BASE, + [RSET_EHCI0] = BCM_6345_EHCI0_BASE, + [RSET_SDRAM] = BCM_6345_SDRAM_BASE, + [RSET_MEMC] = BCM_6345_MEMC_BASE, + [RSET_DDR] = BCM_6345_DDR_BASE, +}; + +static const int bcm96345_irqs[] = { + [IRQ_TIMER] = BCM_6345_TIMER_IRQ, + [IRQ_UART0] = BCM_6345_UART0_IRQ, + [IRQ_DSL] = BCM_6345_DSL_IRQ, + [IRQ_ENET0] = BCM_6345_ENET0_IRQ, + [IRQ_ENET_PHY] = BCM_6345_ENET_PHY_IRQ, + [IRQ_ENET0_RXDMA] = BCM_6345_ENET0_RXDMA_IRQ, + [IRQ_ENET0_TXDMA] = BCM_6345_ENET0_TXDMA_IRQ, +}; + +/* + * 6348 register sets and irqs + */ +static const unsigned long bcm96348_regs_base[] = { + [RSET_DSL_LMEM] = BCM_6348_DSL_LMEM_BASE, + [RSET_PERF] = BCM_6348_PERF_BASE, + [RSET_TIMER] = BCM_6348_TIMER_BASE, + [RSET_WDT] = BCM_6348_WDT_BASE, + [RSET_UART0] = BCM_6348_UART0_BASE, + [RSET_GPIO] = BCM_6348_GPIO_BASE, + [RSET_SPI] = BCM_6348_SPI_BASE, + [RSET_OHCI0] = BCM_6348_OHCI0_BASE, + [RSET_OHCI_PRIV] = BCM_6348_OHCI_PRIV_BASE, + [RSET_USBH_PRIV] = BCM_6348_USBH_PRIV_BASE, + [RSET_MPI] = BCM_6348_MPI_BASE, + [RSET_PCMCIA] = BCM_6348_PCMCIA_BASE, + [RSET_SDRAM] = BCM_6348_SDRAM_BASE, + [RSET_DSL] = BCM_6348_DSL_BASE, + [RSET_ENET0] = BCM_6348_ENET0_BASE, + [RSET_ENET1] = BCM_6348_ENET1_BASE, + [RSET_ENETDMA] = BCM_6348_ENETDMA_BASE, + [RSET_MEMC] = BCM_6348_MEMC_BASE, + [RSET_DDR] = BCM_6348_DDR_BASE, +}; + +static const int bcm96348_irqs[] = { + [IRQ_TIMER] = BCM_6348_TIMER_IRQ, + [IRQ_UART0] = BCM_6348_UART0_IRQ, + [IRQ_DSL] = BCM_6348_DSL_IRQ, + [IRQ_ENET0] = BCM_6348_ENET0_IRQ, + [IRQ_ENET1] = BCM_6348_ENET1_IRQ, + [IRQ_ENET_PHY] = BCM_6348_ENET_PHY_IRQ, + [IRQ_OHCI0] = BCM_6348_OHCI0_IRQ, + [IRQ_PCMCIA] = BCM_6348_PCMCIA_IRQ, + [IRQ_ENET0_RXDMA] = BCM_6348_ENET0_RXDMA_IRQ, + [IRQ_ENET0_TXDMA] = BCM_6348_ENET0_TXDMA_IRQ, + [IRQ_ENET1_RXDMA] = BCM_6348_ENET1_RXDMA_IRQ, + [IRQ_ENET1_TXDMA] = BCM_6348_ENET1_TXDMA_IRQ, + [IRQ_PCI] = BCM_6348_PCI_IRQ, +}; + +/* + * 6358 register sets and irqs + */ +static const unsigned long bcm96358_regs_base[] = { + [RSET_DSL_LMEM] = BCM_6358_DSL_LMEM_BASE, + [RSET_PERF] = BCM_6358_PERF_BASE, + [RSET_TIMER] = BCM_6358_TIMER_BASE, + [RSET_WDT] = BCM_6358_WDT_BASE, + [RSET_UART0] = BCM_6358_UART0_BASE, + [RSET_GPIO] = BCM_6358_GPIO_BASE, + [RSET_SPI] = BCM_6358_SPI_BASE, + [RSET_OHCI0] = BCM_6358_OHCI0_BASE, + [RSET_EHCI0] = BCM_6358_EHCI0_BASE, + [RSET_OHCI_PRIV] = BCM_6358_OHCI_PRIV_BASE, + [RSET_USBH_PRIV] = BCM_6358_USBH_PRIV_BASE, + [RSET_MPI] = BCM_6358_MPI_BASE, + [RSET_PCMCIA] = BCM_6358_PCMCIA_BASE, + [RSET_SDRAM] = BCM_6358_SDRAM_BASE, + [RSET_DSL] = BCM_6358_DSL_BASE, + [RSET_ENET0] = BCM_6358_ENET0_BASE, + [RSET_ENET1] = BCM_6358_ENET1_BASE, + [RSET_ENETDMA] = BCM_6358_ENETDMA_BASE, + [RSET_MEMC] = BCM_6358_MEMC_BASE, + [RSET_DDR] = BCM_6358_DDR_BASE, +}; + +static const int bcm96358_irqs[] = { + [IRQ_TIMER] = BCM_6358_TIMER_IRQ, + [IRQ_UART0] = BCM_6358_UART0_IRQ, + [IRQ_DSL] = BCM_6358_DSL_IRQ, + [IRQ_ENET0] = BCM_6358_ENET0_IRQ, + [IRQ_ENET1] = BCM_6358_ENET1_IRQ, + [IRQ_ENET_PHY] = BCM_6358_ENET_PHY_IRQ, + [IRQ_OHCI0] = BCM_6358_OHCI0_IRQ, + [IRQ_EHCI0] = BCM_6358_EHCI0_IRQ, + [IRQ_PCMCIA] = BCM_6358_PCMCIA_IRQ, + [IRQ_ENET0_RXDMA] = BCM_6358_ENET0_RXDMA_IRQ, + [IRQ_ENET0_TXDMA] = BCM_6358_ENET0_TXDMA_IRQ, + [IRQ_ENET1_RXDMA] = BCM_6358_ENET1_RXDMA_IRQ, + [IRQ_ENET1_TXDMA] = BCM_6358_ENET1_TXDMA_IRQ, + [IRQ_PCI] = BCM_6358_PCI_IRQ, +}; + +u16 __bcm63xx_get_cpu_id(void) +{ + return bcm63xx_cpu_id; +} + +EXPORT_SYMBOL(__bcm63xx_get_cpu_id); + +u16 bcm63xx_get_cpu_rev(void) +{ + return bcm63xx_cpu_rev; +} + +EXPORT_SYMBOL(bcm63xx_get_cpu_rev); + +unsigned int bcm63xx_get_cpu_freq(void) +{ + return bcm63xx_cpu_freq; +} + +unsigned int bcm63xx_get_memory_size(void) +{ + return bcm63xx_memory_size; +} + +static unsigned int detect_cpu_clock(void) +{ + unsigned int tmp, n1 = 0, n2 = 0, m1 = 0; + + /* BCM6338 has a fixed 240 Mhz frequency */ + if (BCMCPU_IS_6338()) + return 240000000; + + /* BCM6345 has a fixed 140Mhz frequency */ + if (BCMCPU_IS_6345()) + return 140000000; + + /* + * frequency depends on PLL configuration: + */ + if (BCMCPU_IS_6348()) { + /* 16MHz * (N1 + 1) * (N2 + 2) / (M1_CPU + 1) */ + tmp = bcm_perf_readl(PERF_MIPSPLLCTL_REG); + n1 = (tmp & MIPSPLLCTL_N1_MASK) >> MIPSPLLCTL_N1_SHIFT; + n2 = (tmp & MIPSPLLCTL_N2_MASK) >> MIPSPLLCTL_N2_SHIFT; + m1 = (tmp & MIPSPLLCTL_M1CPU_MASK) >> MIPSPLLCTL_M1CPU_SHIFT; + n1 += 1; + n2 += 2; + m1 += 1; + } + + if (BCMCPU_IS_6358()) { + /* 16MHz * N1 * N2 / M1_CPU */ + tmp = bcm_ddr_readl(DDR_DMIPSPLLCFG_REG); + n1 = (tmp & DMIPSPLLCFG_N1_MASK) >> DMIPSPLLCFG_N1_SHIFT; + n2 = (tmp & DMIPSPLLCFG_N2_MASK) >> DMIPSPLLCFG_N2_SHIFT; + m1 = (tmp & DMIPSPLLCFG_M1_MASK) >> DMIPSPLLCFG_M1_SHIFT; + } + + return (16 * 1000000 * n1 * n2) / m1; +} + +/* + * attempt to detect the amount of memory installed + */ +static unsigned int detect_memory_size(void) +{ + unsigned int cols = 0, rows = 0, is_32bits = 0, banks = 0; + u32 val; + + if (BCMCPU_IS_6345()) + return (8 * 1024 * 1024); + + if (BCMCPU_IS_6338() || BCMCPU_IS_6348()) { + val = bcm_sdram_readl(SDRAM_CFG_REG); + rows = (val & SDRAM_CFG_ROW_MASK) >> SDRAM_CFG_ROW_SHIFT; + cols = (val & SDRAM_CFG_COL_MASK) >> SDRAM_CFG_COL_SHIFT; + is_32bits = (val & SDRAM_CFG_32B_MASK) ? 1 : 0; + banks = (val & SDRAM_CFG_BANK_MASK) ? 2 : 1; + } + + if (BCMCPU_IS_6358()) { + val = bcm_memc_readl(MEMC_CFG_REG); + rows = (val & MEMC_CFG_ROW_MASK) >> MEMC_CFG_ROW_SHIFT; + cols = (val & MEMC_CFG_COL_MASK) >> MEMC_CFG_COL_SHIFT; + is_32bits = (val & MEMC_CFG_32B_MASK) ? 0 : 1; + banks = 2; + } + + /* 0 => 11 address bits ... 2 => 13 address bits */ + rows += 11; + + /* 0 => 8 address bits ... 2 => 10 address bits */ + cols += 8; + + return 1 << (cols + rows + (is_32bits + 1) + banks); +} + +void __init bcm63xx_cpu_init(void) +{ + unsigned int tmp, expected_cpu_id; + struct cpuinfo_mips *c = ¤t_cpu_data; + + /* soc registers location depends on cpu type */ + expected_cpu_id = 0; + + switch (c->cputype) { + /* + * BCM6338 as the same PrId as BCM3302 see arch/mips/kernel/cpu-probe.c + */ + case CPU_BCM3302: + expected_cpu_id = BCM6338_CPU_ID; + bcm63xx_regs_base = bcm96338_regs_base; + bcm63xx_irqs = bcm96338_irqs; + break; + case CPU_BCM6345: + expected_cpu_id = BCM6345_CPU_ID; + bcm63xx_regs_base = bcm96345_regs_base; + bcm63xx_irqs = bcm96345_irqs; + break; + case CPU_BCM6348: + expected_cpu_id = BCM6348_CPU_ID; + bcm63xx_regs_base = bcm96348_regs_base; + bcm63xx_irqs = bcm96348_irqs; + break; + case CPU_BCM6358: + expected_cpu_id = BCM6358_CPU_ID; + bcm63xx_regs_base = bcm96358_regs_base; + bcm63xx_irqs = bcm96358_irqs; + break; + } + + /* + * really early to panic, but delaying panic would not help since we + * will never get any working console + */ + if (!expected_cpu_id) + panic("unsupported Broadcom CPU"); + + /* + * bcm63xx_regs_base is set, we can access soc registers + */ + + /* double check CPU type */ + tmp = bcm_perf_readl(PERF_REV_REG); + bcm63xx_cpu_id = (tmp & REV_CHIPID_MASK) >> REV_CHIPID_SHIFT; + bcm63xx_cpu_rev = (tmp & REV_REVID_MASK) >> REV_REVID_SHIFT; + + if (bcm63xx_cpu_id != expected_cpu_id) + panic("bcm63xx CPU id mismatch"); + + bcm63xx_cpu_freq = detect_cpu_clock(); + bcm63xx_memory_size = detect_memory_size(); + + printk(KERN_INFO "Detected Broadcom 0x%04x CPU revision %02x\n", + bcm63xx_cpu_id, bcm63xx_cpu_rev); + printk(KERN_INFO "CPU frequency is %u MHz\n", + bcm63xx_cpu_freq / 1000000); + printk(KERN_INFO "%uMB of RAM installed\n", + bcm63xx_memory_size >> 20); +} diff --git a/arch/mips/bcm63xx/cs.c b/arch/mips/bcm63xx/cs.c new file mode 100644 index 00000000000..50d8190bbf7 --- /dev/null +++ b/arch/mips/bcm63xx/cs.c @@ -0,0 +1,144 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/log2.h> +#include <bcm63xx_cpu.h> +#include <bcm63xx_io.h> +#include <bcm63xx_regs.h> +#include <bcm63xx_cs.h> + +static DEFINE_SPINLOCK(bcm63xx_cs_lock); + +/* + * check if given chip select exists + */ +static int is_valid_cs(unsigned int cs) +{ + if (cs > 6) + return 0; + return 1; +} + +/* + * Configure chipselect base address and size (bytes). + * Size must be a power of two between 8k and 256M. + */ +int bcm63xx_set_cs_base(unsigned int cs, u32 base, unsigned int size) +{ + unsigned long flags; + u32 val; + + if (!is_valid_cs(cs)) + return -EINVAL; + + /* sanity check on size */ + if (size != roundup_pow_of_two(size)) + return -EINVAL; + + if (size < 8 * 1024 || size > 256 * 1024 * 1024) + return -EINVAL; + + val = (base & MPI_CSBASE_BASE_MASK); + /* 8k => 0 - 256M => 15 */ + val |= (ilog2(size) - ilog2(8 * 1024)) << MPI_CSBASE_SIZE_SHIFT; + + spin_lock_irqsave(&bcm63xx_cs_lock, flags); + bcm_mpi_writel(val, MPI_CSBASE_REG(cs)); + spin_unlock_irqrestore(&bcm63xx_cs_lock, flags); + + return 0; +} + +EXPORT_SYMBOL(bcm63xx_set_cs_base); + +/* + * configure chipselect timing (ns) + */ +int bcm63xx_set_cs_timing(unsigned int cs, unsigned int wait, + unsigned int setup, unsigned int hold) +{ + unsigned long flags; + u32 val; + + if (!is_valid_cs(cs)) + return -EINVAL; + + spin_lock_irqsave(&bcm63xx_cs_lock, flags); + val = bcm_mpi_readl(MPI_CSCTL_REG(cs)); + val &= ~(MPI_CSCTL_WAIT_MASK); + val &= ~(MPI_CSCTL_SETUP_MASK); + val &= ~(MPI_CSCTL_HOLD_MASK); + val |= wait << MPI_CSCTL_WAIT_SHIFT; + val |= setup << MPI_CSCTL_SETUP_SHIFT; + val |= hold << MPI_CSCTL_HOLD_SHIFT; + bcm_mpi_writel(val, MPI_CSCTL_REG(cs)); + spin_unlock_irqrestore(&bcm63xx_cs_lock, flags); + + return 0; +} + +EXPORT_SYMBOL(bcm63xx_set_cs_timing); + +/* + * configure other chipselect parameter (data bus size, ...) + */ +int bcm63xx_set_cs_param(unsigned int cs, u32 params) +{ + unsigned long flags; + u32 val; + + if (!is_valid_cs(cs)) + return -EINVAL; + + /* none of this fields apply to pcmcia */ + if (cs == MPI_CS_PCMCIA_COMMON || + cs == MPI_CS_PCMCIA_ATTR || + cs == MPI_CS_PCMCIA_IO) + return -EINVAL; + + spin_lock_irqsave(&bcm63xx_cs_lock, flags); + val = bcm_mpi_readl(MPI_CSCTL_REG(cs)); + val &= ~(MPI_CSCTL_DATA16_MASK); + val &= ~(MPI_CSCTL_SYNCMODE_MASK); + val &= ~(MPI_CSCTL_TSIZE_MASK); + val &= ~(MPI_CSCTL_ENDIANSWAP_MASK); + val |= params; + bcm_mpi_writel(val, MPI_CSCTL_REG(cs)); + spin_unlock_irqrestore(&bcm63xx_cs_lock, flags); + + return 0; +} + +EXPORT_SYMBOL(bcm63xx_set_cs_param); + +/* + * set cs status (enable/disable) + */ +int bcm63xx_set_cs_status(unsigned int cs, int enable) +{ + unsigned long flags; + u32 val; + + if (!is_valid_cs(cs)) + return -EINVAL; + + spin_lock_irqsave(&bcm63xx_cs_lock, flags); + val = bcm_mpi_readl(MPI_CSCTL_REG(cs)); + if (enable) + val |= MPI_CSCTL_ENABLE_MASK; + else + val &= ~MPI_CSCTL_ENABLE_MASK; + bcm_mpi_writel(val, MPI_CSCTL_REG(cs)); + spin_unlock_irqrestore(&bcm63xx_cs_lock, flags); + return 0; +} + +EXPORT_SYMBOL(bcm63xx_set_cs_status); diff --git a/arch/mips/bcm63xx/dev-dsp.c b/arch/mips/bcm63xx/dev-dsp.c new file mode 100644 index 00000000000..da46d1d3c77 --- /dev/null +++ b/arch/mips/bcm63xx/dev-dsp.c @@ -0,0 +1,56 @@ +/* + * Broadcom BCM63xx VoIP DSP registration + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2009 Florian Fainelli <florian@openwrt.org> + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> + +#include <bcm63xx_cpu.h> +#include <bcm63xx_dev_dsp.h> +#include <bcm63xx_regs.h> +#include <bcm63xx_io.h> + +static struct resource voip_dsp_resources[] = { + { + .start = -1, /* filled at runtime */ + .end = -1, /* filled at runtime */ + .flags = IORESOURCE_MEM, + }, + { + .start = -1, /* filled at runtime */ + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bcm63xx_voip_dsp_device = { + .name = "bcm63xx-voip-dsp", + .id = 0, + .num_resources = ARRAY_SIZE(voip_dsp_resources), + .resource = voip_dsp_resources, +}; + +int __init bcm63xx_dsp_register(const struct bcm63xx_dsp_platform_data *pd) +{ + struct bcm63xx_dsp_platform_data *dpd; + u32 val; + + /* Get the memory window */ + val = bcm_mpi_readl(MPI_CSBASE_REG(pd->cs - 1)); + val &= MPI_CSBASE_BASE_MASK; + voip_dsp_resources[0].start = val; + voip_dsp_resources[0].end = val + 0xFFFFFFF; + voip_dsp_resources[1].start = pd->ext_irq; + + /* copy given platform data */ + dpd = bcm63xx_voip_dsp_device.dev.platform_data; + memcpy(dpd, pd, sizeof (*pd)); + + return platform_device_register(&bcm63xx_voip_dsp_device); +} diff --git a/arch/mips/bcm63xx/dev-enet.c b/arch/mips/bcm63xx/dev-enet.c new file mode 100644 index 00000000000..9f544badd0b --- /dev/null +++ b/arch/mips/bcm63xx/dev-enet.c @@ -0,0 +1,159 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <bcm63xx_dev_enet.h> +#include <bcm63xx_io.h> +#include <bcm63xx_regs.h> + +static struct resource shared_res[] = { + { + .start = -1, /* filled at runtime */ + .end = -1, /* filled at runtime */ + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device bcm63xx_enet_shared_device = { + .name = "bcm63xx_enet_shared", + .id = 0, + .num_resources = ARRAY_SIZE(shared_res), + .resource = shared_res, +}; + +static int shared_device_registered; + +static struct resource enet0_res[] = { + { + .start = -1, /* filled at runtime */ + .end = -1, /* filled at runtime */ + .flags = IORESOURCE_MEM, + }, + { + .start = -1, /* filled at runtime */ + .flags = IORESOURCE_IRQ, + }, + { + .start = -1, /* filled at runtime */ + .flags = IORESOURCE_IRQ, + }, + { + .start = -1, /* filled at runtime */ + .flags = IORESOURCE_IRQ, + }, +}; + +static struct bcm63xx_enet_platform_data enet0_pd; + +static struct platform_device bcm63xx_enet0_device = { + .name = "bcm63xx_enet", + .id = 0, + .num_resources = ARRAY_SIZE(enet0_res), + .resource = enet0_res, + .dev = { + .platform_data = &enet0_pd, + }, +}; + +static struct resource enet1_res[] = { + { + .start = -1, /* filled at runtime */ + .end = -1, /* filled at runtime */ + .flags = IORESOURCE_MEM, + }, + { + .start = -1, /* filled at runtime */ + .flags = IORESOURCE_IRQ, + }, + { + .start = -1, /* filled at runtime */ + .flags = IORESOURCE_IRQ, + }, + { + .start = -1, /* filled at runtime */ + .flags = IORESOURCE_IRQ, + }, +}; + +static struct bcm63xx_enet_platform_data enet1_pd; + +static struct platform_device bcm63xx_enet1_device = { + .name = "bcm63xx_enet", + .id = 1, + .num_resources = ARRAY_SIZE(enet1_res), + .resource = enet1_res, + .dev = { + .platform_data = &enet1_pd, + }, +}; + +int __init bcm63xx_enet_register(int unit, + const struct bcm63xx_enet_platform_data *pd) +{ + struct platform_device *pdev; + struct bcm63xx_enet_platform_data *dpd; + int ret; + + if (unit > 1) + return -ENODEV; + + if (!shared_device_registered) { + shared_res[0].start = bcm63xx_regset_address(RSET_ENETDMA); + shared_res[0].end = shared_res[0].start; + if (BCMCPU_IS_6338()) + shared_res[0].end += (RSET_ENETDMA_SIZE / 2) - 1; + else + shared_res[0].end += (RSET_ENETDMA_SIZE) - 1; + + ret = platform_device_register(&bcm63xx_enet_shared_device); + if (ret) + return ret; + shared_device_registered = 1; + } + + if (unit == 0) { + enet0_res[0].start = bcm63xx_regset_address(RSET_ENET0); + enet0_res[0].end = enet0_res[0].start; + enet0_res[0].end += RSET_ENET_SIZE - 1; + enet0_res[1].start = bcm63xx_get_irq_number(IRQ_ENET0); + enet0_res[2].start = bcm63xx_get_irq_number(IRQ_ENET0_RXDMA); + enet0_res[3].start = bcm63xx_get_irq_number(IRQ_ENET0_TXDMA); + pdev = &bcm63xx_enet0_device; + } else { + enet1_res[0].start = bcm63xx_regset_address(RSET_ENET1); + enet1_res[0].end = enet1_res[0].start; + enet1_res[0].end += RSET_ENET_SIZE - 1; + enet1_res[1].start = bcm63xx_get_irq_number(IRQ_ENET1); + enet1_res[2].start = bcm63xx_get_irq_number(IRQ_ENET1_RXDMA); + enet1_res[3].start = bcm63xx_get_irq_number(IRQ_ENET1_TXDMA); + pdev = &bcm63xx_enet1_device; + } + + /* copy given platform data */ + dpd = pdev->dev.platform_data; + memcpy(dpd, pd, sizeof(*pd)); + + /* adjust them in case internal phy is used */ + if (dpd->use_internal_phy) { + + /* internal phy only exists for enet0 */ + if (unit == 1) + return -ENODEV; + + dpd->phy_id = 1; + dpd->has_phy_interrupt = 1; + dpd->phy_interrupt = bcm63xx_get_irq_number(IRQ_ENET_PHY); + } + + ret = platform_device_register(pdev); + if (ret) + return ret; + return 0; +} diff --git a/arch/mips/bcm63xx/early_printk.c b/arch/mips/bcm63xx/early_printk.c new file mode 100644 index 00000000000..bf353c937df --- /dev/null +++ b/arch/mips/bcm63xx/early_printk.c @@ -0,0 +1,30 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> + */ + +#include <linux/init.h> +#include <bcm63xx_io.h> +#include <bcm63xx_regs.h> + +static void __init wait_xfered(void) +{ + unsigned int val; + + /* wait for any previous char to be transmitted */ + do { + val = bcm_uart0_readl(UART_IR_REG); + if (val & UART_IR_STAT(UART_IR_TXEMPTY)) + break; + } while (1); +} + +void __init prom_putchar(char c) +{ + wait_xfered(); + bcm_uart0_writel(c, UART_FIFO_REG); + wait_xfered(); +} diff --git a/arch/mips/bcm63xx/gpio.c b/arch/mips/bcm63xx/gpio.c new file mode 100644 index 00000000000..87ca3904633 --- /dev/null +++ b/arch/mips/bcm63xx/gpio.c @@ -0,0 +1,134 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> + * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org> + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> + +#include <bcm63xx_cpu.h> +#include <bcm63xx_gpio.h> +#include <bcm63xx_io.h> +#include <bcm63xx_regs.h> + +static DEFINE_SPINLOCK(bcm63xx_gpio_lock); +static u32 gpio_out_low, gpio_out_high; + +static void bcm63xx_gpio_set(struct gpio_chip *chip, + unsigned gpio, int val) +{ + u32 reg; + u32 mask; + u32 *v; + unsigned long flags; + + if (gpio >= chip->ngpio) + BUG(); + + if (gpio < 32) { + reg = GPIO_DATA_LO_REG; + mask = 1 << gpio; + v = &gpio_out_low; + } else { + reg = GPIO_DATA_HI_REG; + mask = 1 << (gpio - 32); + v = &gpio_out_high; + } + + spin_lock_irqsave(&bcm63xx_gpio_lock, flags); + if (val) + *v |= mask; + else + *v &= ~mask; + bcm_gpio_writel(*v, reg); + spin_unlock_irqrestore(&bcm63xx_gpio_lock, flags); +} + +static int bcm63xx_gpio_get(struct gpio_chip *chip, unsigned gpio) +{ + u32 reg; + u32 mask; + + if (gpio >= chip->ngpio) + BUG(); + + if (gpio < 32) { + reg = GPIO_DATA_LO_REG; + mask = 1 << gpio; + } else { + reg = GPIO_DATA_HI_REG; + mask = 1 << (gpio - 32); + } + + return !!(bcm_gpio_readl(reg) & mask); +} + +static int bcm63xx_gpio_set_direction(struct gpio_chip *chip, + unsigned gpio, int dir) +{ + u32 reg; + u32 mask; + u32 tmp; + unsigned long flags; + + if (gpio >= chip->ngpio) + BUG(); + + if (gpio < 32) { + reg = GPIO_CTL_LO_REG; + mask = 1 << gpio; + } else { + reg = GPIO_CTL_HI_REG; + mask = 1 << (gpio - 32); + } + + spin_lock_irqsave(&bcm63xx_gpio_lock, flags); + tmp = bcm_gpio_readl(reg); + if (dir == GPIO_DIR_IN) + tmp &= ~mask; + else + tmp |= mask; + bcm_gpio_writel(tmp, reg); + spin_unlock_irqrestore(&bcm63xx_gpio_lock, flags); + + return 0; +} + +static int bcm63xx_gpio_direction_input(struct gpio_chip *chip, unsigned gpio) +{ + return bcm63xx_gpio_set_direction(chip, gpio, GPIO_DIR_IN); +} + +static int bcm63xx_gpio_direction_output(struct gpio_chip *chip, + unsigned gpio, int value) +{ + bcm63xx_gpio_set(chip, gpio, value); + return bcm63xx_gpio_set_direction(chip, gpio, GPIO_DIR_OUT); +} + + +static struct gpio_chip bcm63xx_gpio_chip = { + .label = "bcm63xx-gpio", + .direction_input = bcm63xx_gpio_direction_input, + .direction_output = bcm63xx_gpio_direction_output, + .get = bcm63xx_gpio_get, + .set = bcm63xx_gpio_set, + .base = 0, +}; + +int __init bcm63xx_gpio_init(void) +{ + bcm63xx_gpio_chip.ngpio = bcm63xx_gpio_count(); + pr_info("registering %d GPIOs\n", bcm63xx_gpio_chip.ngpio); + + return gpiochip_add(&bcm63xx_gpio_chip); +} + +arch_initcall(bcm63xx_gpio_init); diff --git a/arch/mips/bcm63xx/irq.c b/arch/mips/bcm63xx/irq.c new file mode 100644 index 00000000000..a0c5cd18c19 --- /dev/null +++ b/arch/mips/bcm63xx/irq.c @@ -0,0 +1,253 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> + * Copyright (C) 2008 Nicolas Schichan <nschichan@freebox.fr> + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <asm/irq_cpu.h> +#include <asm/mipsregs.h> +#include <bcm63xx_cpu.h> +#include <bcm63xx_regs.h> +#include <bcm63xx_io.h> +#include <bcm63xx_irq.h> + +/* + * dispatch internal devices IRQ (uart, enet, watchdog, ...). do not + * prioritize any interrupt relatively to another. the static counter + * will resume the loop where it ended the last time we left this + * function. + */ +static void bcm63xx_irq_dispatch_internal(void) +{ + u32 pending; + static int i; + + pending = bcm_perf_readl(PERF_IRQMASK_REG) & + bcm_perf_readl(PERF_IRQSTAT_REG); + + if (!pending) + return ; + + while (1) { + int to_call = i; + + i = (i + 1) & 0x1f; + if (pending & (1 << to_call)) { + do_IRQ(to_call + IRQ_INTERNAL_BASE); + break; + } + } +} + +asmlinkage void plat_irq_dispatch(void) +{ + u32 cause; + + do { + cause = read_c0_cause() & read_c0_status() & ST0_IM; + + if (!cause) + break; + + if (cause & CAUSEF_IP7) + do_IRQ(7); + if (cause & CAUSEF_IP2) + bcm63xx_irq_dispatch_internal(); + if (cause & CAUSEF_IP3) + do_IRQ(IRQ_EXT_0); + if (cause & CAUSEF_IP4) + do_IRQ(IRQ_EXT_1); + if (cause & CAUSEF_IP5) + do_IRQ(IRQ_EXT_2); + if (cause & CAUSEF_IP6) + do_IRQ(IRQ_EXT_3); + } while (1); +} + +/* + * internal IRQs operations: only mask/unmask on PERF irq mask + * register. + */ +static inline void bcm63xx_internal_irq_mask(unsigned int irq) +{ + u32 mask; + + irq -= IRQ_INTERNAL_BASE; + mask = bcm_perf_readl(PERF_IRQMASK_REG); + mask &= ~(1 << irq); + bcm_perf_writel(mask, PERF_IRQMASK_REG); +} + +static void bcm63xx_internal_irq_unmask(unsigned int irq) +{ + u32 mask; + + irq -= IRQ_INTERNAL_BASE; + mask = bcm_perf_readl(PERF_IRQMASK_REG); + mask |= (1 << irq); + bcm_perf_writel(mask, PERF_IRQMASK_REG); +} + +static unsigned int bcm63xx_internal_irq_startup(unsigned int irq) +{ + bcm63xx_internal_irq_unmask(irq); + return 0; +} + +/* + * external IRQs operations: mask/unmask and clear on PERF external + * irq control register. + */ +static void bcm63xx_external_irq_mask(unsigned int irq) +{ + u32 reg; + + irq -= IRQ_EXT_BASE; + reg = bcm_perf_readl(PERF_EXTIRQ_CFG_REG); + reg &= ~EXTIRQ_CFG_MASK(irq); + bcm_perf_writel(reg, PERF_EXTIRQ_CFG_REG); +} + +static void bcm63xx_external_irq_unmask(unsigned int irq) +{ + u32 reg; + + irq -= IRQ_EXT_BASE; + reg = bcm_perf_readl(PERF_EXTIRQ_CFG_REG); + reg |= EXTIRQ_CFG_MASK(irq); + bcm_perf_writel(reg, PERF_EXTIRQ_CFG_REG); +} + +static void bcm63xx_external_irq_clear(unsigned int irq) +{ + u32 reg; + + irq -= IRQ_EXT_BASE; + reg = bcm_perf_readl(PERF_EXTIRQ_CFG_REG); + reg |= EXTIRQ_CFG_CLEAR(irq); + bcm_perf_writel(reg, PERF_EXTIRQ_CFG_REG); +} + +static unsigned int bcm63xx_external_irq_startup(unsigned int irq) +{ + set_c0_status(0x100 << (irq - IRQ_MIPS_BASE)); + irq_enable_hazard(); + bcm63xx_external_irq_unmask(irq); + return 0; +} + +static void bcm63xx_external_irq_shutdown(unsigned int irq) +{ + bcm63xx_external_irq_mask(irq); + clear_c0_status(0x100 << (irq - IRQ_MIPS_BASE)); + irq_disable_hazard(); +} + +static int bcm63xx_external_irq_set_type(unsigned int irq, + unsigned int flow_type) +{ + u32 reg; + struct irq_desc *desc = irq_desc + irq; + + irq -= IRQ_EXT_BASE; + + flow_type &= IRQ_TYPE_SENSE_MASK; + + if (flow_type == IRQ_TYPE_NONE) + flow_type = IRQ_TYPE_LEVEL_LOW; + + reg = bcm_perf_readl(PERF_EXTIRQ_CFG_REG); + switch (flow_type) { + case IRQ_TYPE_EDGE_BOTH: + reg &= ~EXTIRQ_CFG_LEVELSENSE(irq); + reg |= EXTIRQ_CFG_BOTHEDGE(irq); + break; + + case IRQ_TYPE_EDGE_RISING: + reg &= ~EXTIRQ_CFG_LEVELSENSE(irq); + reg |= EXTIRQ_CFG_SENSE(irq); + reg &= ~EXTIRQ_CFG_BOTHEDGE(irq); + break; + + case IRQ_TYPE_EDGE_FALLING: + reg &= ~EXTIRQ_CFG_LEVELSENSE(irq); + reg &= ~EXTIRQ_CFG_SENSE(irq); + reg &= ~EXTIRQ_CFG_BOTHEDGE(irq); + break; + + case IRQ_TYPE_LEVEL_HIGH: + reg |= EXTIRQ_CFG_LEVELSENSE(irq); + reg |= EXTIRQ_CFG_SENSE(irq); + break; + + case IRQ_TYPE_LEVEL_LOW: + reg |= EXTIRQ_CFG_LEVELSENSE(irq); + reg &= ~EXTIRQ_CFG_SENSE(irq); + break; + + default: + printk(KERN_ERR "bogus flow type combination given !\n"); + return -EINVAL; + } + bcm_perf_writel(reg, PERF_EXTIRQ_CFG_REG); + + if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH)) { + desc->status |= IRQ_LEVEL; + desc->handle_irq = handle_level_irq; + } else { + desc->handle_irq = handle_edge_irq; + } + + return 0; +} + +static struct irq_chip bcm63xx_internal_irq_chip = { + .name = "bcm63xx_ipic", + .startup = bcm63xx_internal_irq_startup, + .shutdown = bcm63xx_internal_irq_mask, + + .mask = bcm63xx_internal_irq_mask, + .mask_ack = bcm63xx_internal_irq_mask, + .unmask = bcm63xx_internal_irq_unmask, +}; + +static struct irq_chip bcm63xx_external_irq_chip = { + .name = "bcm63xx_epic", + .startup = bcm63xx_external_irq_startup, + .shutdown = bcm63xx_external_irq_shutdown, + + .ack = bcm63xx_external_irq_clear, + + .mask = bcm63xx_external_irq_mask, + .unmask = bcm63xx_external_irq_unmask, + + .set_type = bcm63xx_external_irq_set_type, +}; + +static struct irqaction cpu_ip2_cascade_action = { + .handler = no_action, + .name = "cascade_ip2", +}; + +void __init arch_init_irq(void) +{ + int i; + + mips_cpu_irq_init(); + for (i = IRQ_INTERNAL_BASE; i < NR_IRQS; ++i) + set_irq_chip_and_handler(i, &bcm63xx_internal_irq_chip, + handle_level_irq); + + for (i = IRQ_EXT_BASE; i < IRQ_EXT_BASE + 4; ++i) + set_irq_chip_and_handler(i, &bcm63xx_external_irq_chip, + handle_edge_irq); + + setup_irq(IRQ_MIPS_BASE + 2, &cpu_ip2_cascade_action); +} diff --git a/arch/mips/bcm63xx/prom.c b/arch/mips/bcm63xx/prom.c new file mode 100644 index 00000000000..fb284fbc585 --- /dev/null +++ b/arch/mips/bcm63xx/prom.c @@ -0,0 +1,55 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> + */ + +#include <linux/init.h> +#include <linux/bootmem.h> +#include <asm/bootinfo.h> +#include <bcm63xx_board.h> +#include <bcm63xx_cpu.h> +#include <bcm63xx_io.h> +#include <bcm63xx_regs.h> +#include <bcm63xx_gpio.h> + +void __init prom_init(void) +{ + u32 reg, mask; + + bcm63xx_cpu_init(); + + /* stop any running watchdog */ + bcm_wdt_writel(WDT_STOP_1, WDT_CTL_REG); + bcm_wdt_writel(WDT_STOP_2, WDT_CTL_REG); + + /* disable all hardware blocks clock for now */ + if (BCMCPU_IS_6338()) + mask = CKCTL_6338_ALL_SAFE_EN; + else if (BCMCPU_IS_6345()) + mask = CKCTL_6345_ALL_SAFE_EN; + else if (BCMCPU_IS_6348()) + mask = CKCTL_6348_ALL_SAFE_EN; + else + /* BCMCPU_IS_6358() */ + mask = CKCTL_6358_ALL_SAFE_EN; + + reg = bcm_perf_readl(PERF_CKCTL_REG); + reg &= ~mask; + bcm_perf_writel(reg, PERF_CKCTL_REG); + + /* assign command line from kernel config */ + strcpy(arcs_cmdline, CONFIG_CMDLINE); + + /* register gpiochip */ + bcm63xx_gpio_init(); + + /* do low level board init */ + board_prom_init(); +} + +void __init prom_free_prom_memory(void) +{ +} diff --git a/arch/mips/bcm63xx/setup.c b/arch/mips/bcm63xx/setup.c new file mode 100644 index 00000000000..b18a0ca926f --- /dev/null +++ b/arch/mips/bcm63xx/setup.c @@ -0,0 +1,125 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/bootmem.h> +#include <linux/ioport.h> +#include <linux/pm.h> +#include <asm/bootinfo.h> +#include <asm/time.h> +#include <asm/reboot.h> +#include <asm/cacheflush.h> +#include <bcm63xx_board.h> +#include <bcm63xx_cpu.h> +#include <bcm63xx_regs.h> +#include <bcm63xx_io.h> + +void bcm63xx_machine_halt(void) +{ + printk(KERN_INFO "System halted\n"); + while (1) + ; +} + +static void bcm6348_a1_reboot(void) +{ + u32 reg; + + /* soft reset all blocks */ + printk(KERN_INFO "soft-reseting all blocks ...\n"); + reg = bcm_perf_readl(PERF_SOFTRESET_REG); + reg &= ~SOFTRESET_6348_ALL; + bcm_perf_writel(reg, PERF_SOFTRESET_REG); + mdelay(10); + + reg = bcm_perf_readl(PERF_SOFTRESET_REG); + reg |= SOFTRESET_6348_ALL; + bcm_perf_writel(reg, PERF_SOFTRESET_REG); + mdelay(10); + + /* Jump to the power on address. */ + printk(KERN_INFO "jumping to reset vector.\n"); + /* set high vectors (base at 0xbfc00000 */ + set_c0_status(ST0_BEV | ST0_ERL); + /* run uncached in kseg0 */ + change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED); + __flush_cache_all(); + /* remove all wired TLB entries */ + write_c0_wired(0); + __asm__ __volatile__( + "jr\t%0" + : + : "r" (0xbfc00000)); + while (1) + ; +} + +void bcm63xx_machine_reboot(void) +{ + u32 reg; + + /* mask and clear all external irq */ + reg = bcm_perf_readl(PERF_EXTIRQ_CFG_REG); + reg &= ~EXTIRQ_CFG_MASK_ALL; + reg |= EXTIRQ_CFG_CLEAR_ALL; + bcm_perf_writel(reg, PERF_EXTIRQ_CFG_REG); + + if (BCMCPU_IS_6348() && (bcm63xx_get_cpu_rev() == 0xa1)) + bcm6348_a1_reboot(); + + printk(KERN_INFO "triggering watchdog soft-reset...\n"); + bcm_perf_writel(SYS_PLL_SOFT_RESET, PERF_SYS_PLL_CTL_REG); + while (1) + ; +} + +static void __bcm63xx_machine_reboot(char *p) +{ + bcm63xx_machine_reboot(); +} + +/* + * return system type in /proc/cpuinfo + */ +const char *get_system_type(void) +{ + static char buf[128]; + snprintf(buf, sizeof(buf), "bcm63xx/%s (0x%04x/0x%04X)", + board_get_name(), + bcm63xx_get_cpu_id(), bcm63xx_get_cpu_rev()); + return buf; +} + +void __init plat_time_init(void) +{ + mips_hpt_frequency = bcm63xx_get_cpu_freq() / 2; +} + +void __init plat_mem_setup(void) +{ + add_memory_region(0, bcm63xx_get_memory_size(), BOOT_MEM_RAM); + + _machine_halt = bcm63xx_machine_halt; + _machine_restart = __bcm63xx_machine_reboot; + pm_power_off = bcm63xx_machine_halt; + + set_io_port_base(0); + ioport_resource.start = 0; + ioport_resource.end = ~0; + + board_setup(); +} + +int __init bcm63xx_register_devices(void) +{ + return board_register_devices(); +} + +arch_initcall(bcm63xx_register_devices); diff --git a/arch/mips/bcm63xx/timer.c b/arch/mips/bcm63xx/timer.c new file mode 100644 index 00000000000..ba522bdcde4 --- /dev/null +++ b/arch/mips/bcm63xx/timer.c @@ -0,0 +1,205 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> + */ + +#include <linux/kernel.h> +#include <linux/err.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> +#include <linux/clk.h> +#include <bcm63xx_cpu.h> +#include <bcm63xx_io.h> +#include <bcm63xx_timer.h> +#include <bcm63xx_regs.h> + +static DEFINE_SPINLOCK(timer_reg_lock); +static DEFINE_SPINLOCK(timer_data_lock); +static struct clk *periph_clk; + +static struct timer_data { + void (*cb)(void *); + void *data; +} timer_data[BCM63XX_TIMER_COUNT]; + +static irqreturn_t timer_interrupt(int irq, void *dev_id) +{ + u32 stat; + int i; + + spin_lock(&timer_reg_lock); + stat = bcm_timer_readl(TIMER_IRQSTAT_REG); + bcm_timer_writel(stat, TIMER_IRQSTAT_REG); + spin_unlock(&timer_reg_lock); + + for (i = 0; i < BCM63XX_TIMER_COUNT; i++) { + if (!(stat & TIMER_IRQSTAT_TIMER_CAUSE(i))) + continue; + + spin_lock(&timer_data_lock); + if (!timer_data[i].cb) { + spin_unlock(&timer_data_lock); + continue; + } + + timer_data[i].cb(timer_data[i].data); + spin_unlock(&timer_data_lock); + } + + return IRQ_HANDLED; +} + +int bcm63xx_timer_enable(int id) +{ + u32 reg; + unsigned long flags; + + if (id >= BCM63XX_TIMER_COUNT) + return -EINVAL; + + spin_lock_irqsave(&timer_reg_lock, flags); + + reg = bcm_timer_readl(TIMER_CTLx_REG(id)); + reg |= TIMER_CTL_ENABLE_MASK; + bcm_timer_writel(reg, TIMER_CTLx_REG(id)); + + reg = bcm_timer_readl(TIMER_IRQSTAT_REG); + reg |= TIMER_IRQSTAT_TIMER_IR_EN(id); + bcm_timer_writel(reg, TIMER_IRQSTAT_REG); + + spin_unlock_irqrestore(&timer_reg_lock, flags); + return 0; +} + +EXPORT_SYMBOL(bcm63xx_timer_enable); + +int bcm63xx_timer_disable(int id) +{ + u32 reg; + unsigned long flags; + + if (id >= BCM63XX_TIMER_COUNT) + return -EINVAL; + + spin_lock_irqsave(&timer_reg_lock, flags); + + reg = bcm_timer_readl(TIMER_CTLx_REG(id)); + reg &= ~TIMER_CTL_ENABLE_MASK; + bcm_timer_writel(reg, TIMER_CTLx_REG(id)); + + reg = bcm_timer_readl(TIMER_IRQSTAT_REG); + reg &= ~TIMER_IRQSTAT_TIMER_IR_EN(id); + bcm_timer_writel(reg, TIMER_IRQSTAT_REG); + + spin_unlock_irqrestore(&timer_reg_lock, flags); + return 0; +} + +EXPORT_SYMBOL(bcm63xx_timer_disable); + +int bcm63xx_timer_register(int id, void (*callback)(void *data), void *data) +{ + unsigned long flags; + int ret; + + if (id >= BCM63XX_TIMER_COUNT || !callback) + return -EINVAL; + + ret = 0; + spin_lock_irqsave(&timer_data_lock, flags); + if (timer_data[id].cb) { + ret = -EBUSY; + goto out; + } + + timer_data[id].cb = callback; + timer_data[id].data = data; + +out: + spin_unlock_irqrestore(&timer_data_lock, flags); + return ret; +} + +EXPORT_SYMBOL(bcm63xx_timer_register); + +void bcm63xx_timer_unregister(int id) +{ + unsigned long flags; + + if (id >= BCM63XX_TIMER_COUNT) + return; + + spin_lock_irqsave(&timer_data_lock, flags); + timer_data[id].cb = NULL; + spin_unlock_irqrestore(&timer_data_lock, flags); +} + +EXPORT_SYMBOL(bcm63xx_timer_unregister); + +unsigned int bcm63xx_timer_countdown(unsigned int countdown_us) +{ + return (clk_get_rate(periph_clk) / (1000 * 1000)) * countdown_us; +} + +EXPORT_SYMBOL(bcm63xx_timer_countdown); + +int bcm63xx_timer_set(int id, int monotonic, unsigned int countdown_us) +{ + u32 reg, countdown; + unsigned long flags; + + if (id >= BCM63XX_TIMER_COUNT) + return -EINVAL; + + countdown = bcm63xx_timer_countdown(countdown_us); + if (countdown & ~TIMER_CTL_COUNTDOWN_MASK) + return -EINVAL; + + spin_lock_irqsave(&timer_reg_lock, flags); + reg = bcm_timer_readl(TIMER_CTLx_REG(id)); + + if (monotonic) + reg &= ~TIMER_CTL_MONOTONIC_MASK; + else + reg |= TIMER_CTL_MONOTONIC_MASK; + + reg &= ~TIMER_CTL_COUNTDOWN_MASK; + reg |= countdown; + bcm_timer_writel(reg, TIMER_CTLx_REG(id)); + + spin_unlock_irqrestore(&timer_reg_lock, flags); + return 0; +} + +EXPORT_SYMBOL(bcm63xx_timer_set); + +int bcm63xx_timer_init(void) +{ + int ret, irq; + u32 reg; + + reg = bcm_timer_readl(TIMER_IRQSTAT_REG); + reg &= ~TIMER_IRQSTAT_TIMER0_IR_EN; + reg &= ~TIMER_IRQSTAT_TIMER1_IR_EN; + reg &= ~TIMER_IRQSTAT_TIMER2_IR_EN; + bcm_timer_writel(reg, TIMER_IRQSTAT_REG); + + periph_clk = clk_get(NULL, "periph"); + if (IS_ERR(periph_clk)) + return -ENODEV; + + irq = bcm63xx_get_irq_number(IRQ_TIMER); + ret = request_irq(irq, timer_interrupt, 0, "bcm63xx_timer", NULL); + if (ret) { + printk(KERN_ERR "bcm63xx_timer: failed to register irq\n"); + return ret; + } + + return 0; +} + +arch_initcall(bcm63xx_timer_init); diff --git a/arch/mips/boot/elf2ecoff.c b/arch/mips/boot/elf2ecoff.c index c5a7f308c40..e19d906236a 100644 --- a/arch/mips/boot/elf2ecoff.c +++ b/arch/mips/boot/elf2ecoff.c @@ -59,8 +59,8 @@ struct sect { }; int *symTypeTable; -int must_convert_endian = 0; -int format_bigendian = 0; +int must_convert_endian; +int format_bigendian; static void copy(int out, int in, off_t offset, off_t size) { diff --git a/arch/mips/cavium-octeon/Makefile b/arch/mips/cavium-octeon/Makefile index d6903c3f3d5..13943628052 100644 --- a/arch/mips/cavium-octeon/Makefile +++ b/arch/mips/cavium-octeon/Makefile @@ -6,10 +6,10 @@ # License. See the file "COPYING" in the main directory of this archive # for more details. # -# Copyright (C) 2005-2008 Cavium Networks +# Copyright (C) 2005-2009 Cavium Networks # -obj-y := setup.o serial.o octeon-irq.o csrc-octeon.o +obj-y := setup.o serial.o octeon-platform.o octeon-irq.o csrc-octeon.o obj-y += dma-octeon.o flash_setup.o obj-y += octeon-memcpy.o diff --git a/arch/mips/cavium-octeon/octeon-platform.c b/arch/mips/cavium-octeon/octeon-platform.c new file mode 100644 index 00000000000..be711dd2d91 --- /dev/null +++ b/arch/mips/cavium-octeon/octeon-platform.c @@ -0,0 +1,164 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2004-2009 Cavium Networks + * Copyright (C) 2008 Wind River Systems + */ + +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/module.h> +#include <linux/platform_device.h> + +#include <asm/octeon/octeon.h> +#include <asm/octeon/cvmx-rnm-defs.h> + +static struct octeon_cf_data octeon_cf_data; + +static int __init octeon_cf_device_init(void) +{ + union cvmx_mio_boot_reg_cfgx mio_boot_reg_cfg; + unsigned long base_ptr, region_base, region_size; + struct platform_device *pd; + struct resource cf_resources[3]; + unsigned int num_resources; + int i; + int ret = 0; + + /* Setup octeon-cf platform device if present. */ + base_ptr = 0; + if (octeon_bootinfo->major_version == 1 + && octeon_bootinfo->minor_version >= 1) { + if (octeon_bootinfo->compact_flash_common_base_addr) + base_ptr = + octeon_bootinfo->compact_flash_common_base_addr; + } else { + base_ptr = 0x1d000800; + } + + if (!base_ptr) + return ret; + + /* Find CS0 region. */ + for (i = 0; i < 8; i++) { + mio_boot_reg_cfg.u64 = cvmx_read_csr(CVMX_MIO_BOOT_REG_CFGX(i)); + region_base = mio_boot_reg_cfg.s.base << 16; + region_size = (mio_boot_reg_cfg.s.size + 1) << 16; + if (mio_boot_reg_cfg.s.en && base_ptr >= region_base + && base_ptr < region_base + region_size) + break; + } + if (i >= 7) { + /* i and i + 1 are CS0 and CS1, both must be less than 8. */ + goto out; + } + octeon_cf_data.base_region = i; + octeon_cf_data.is16bit = mio_boot_reg_cfg.s.width; + octeon_cf_data.base_region_bias = base_ptr - region_base; + memset(cf_resources, 0, sizeof(cf_resources)); + num_resources = 0; + cf_resources[num_resources].flags = IORESOURCE_MEM; + cf_resources[num_resources].start = region_base; + cf_resources[num_resources].end = region_base + region_size - 1; + num_resources++; + + + if (!(base_ptr & 0xfffful)) { + /* + * Boot loader signals availability of DMA (true_ide + * mode) by setting low order bits of base_ptr to + * zero. + */ + + /* Asume that CS1 immediately follows. */ + mio_boot_reg_cfg.u64 = + cvmx_read_csr(CVMX_MIO_BOOT_REG_CFGX(i + 1)); + region_base = mio_boot_reg_cfg.s.base << 16; + region_size = (mio_boot_reg_cfg.s.size + 1) << 16; + if (!mio_boot_reg_cfg.s.en) + goto out; + + cf_resources[num_resources].flags = IORESOURCE_MEM; + cf_resources[num_resources].start = region_base; + cf_resources[num_resources].end = region_base + region_size - 1; + num_resources++; + + octeon_cf_data.dma_engine = 0; + cf_resources[num_resources].flags = IORESOURCE_IRQ; + cf_resources[num_resources].start = OCTEON_IRQ_BOOTDMA; + cf_resources[num_resources].end = OCTEON_IRQ_BOOTDMA; + num_resources++; + } else { + octeon_cf_data.dma_engine = -1; + } + + pd = platform_device_alloc("pata_octeon_cf", -1); + if (!pd) { + ret = -ENOMEM; + goto out; + } + pd->dev.platform_data = &octeon_cf_data; + + ret = platform_device_add_resources(pd, cf_resources, num_resources); + if (ret) + goto fail; + + ret = platform_device_add(pd); + if (ret) + goto fail; + + return ret; +fail: + platform_device_put(pd); +out: + return ret; +} +device_initcall(octeon_cf_device_init); + +/* Octeon Random Number Generator. */ +static int __init octeon_rng_device_init(void) +{ + struct platform_device *pd; + int ret = 0; + + struct resource rng_resources[] = { + { + .flags = IORESOURCE_MEM, + .start = XKPHYS_TO_PHYS(CVMX_RNM_CTL_STATUS), + .end = XKPHYS_TO_PHYS(CVMX_RNM_CTL_STATUS) + 0xf + }, { + .flags = IORESOURCE_MEM, + .start = cvmx_build_io_address(8, 0), + .end = cvmx_build_io_address(8, 0) + 0x7 + } + }; + + pd = platform_device_alloc("octeon_rng", -1); + if (!pd) { + ret = -ENOMEM; + goto out; + } + + ret = platform_device_add_resources(pd, rng_resources, + ARRAY_SIZE(rng_resources)); + if (ret) + goto fail; + + ret = platform_device_add(pd); + if (ret) + goto fail; + + return ret; +fail: + platform_device_put(pd); + +out: + return ret; +} +device_initcall(octeon_rng_device_init); + +MODULE_AUTHOR("David Daney <ddaney@caviumnetworks.com>"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Platform driver for Octeon SOC"); diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c index da559249cc2..b321d3b1687 100644 --- a/arch/mips/cavium-octeon/setup.c +++ b/arch/mips/cavium-octeon/setup.c @@ -11,7 +11,6 @@ #include <linux/delay.h> #include <linux/interrupt.h> #include <linux/io.h> -#include <linux/irq.h> #include <linux/serial.h> #include <linux/smp.h> #include <linux/types.h> @@ -824,105 +823,3 @@ void prom_free_prom_memory(void) CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB option is set */ octeon_hal_setup_reserved32(); } - -static struct octeon_cf_data octeon_cf_data; - -static int __init octeon_cf_device_init(void) -{ - union cvmx_mio_boot_reg_cfgx mio_boot_reg_cfg; - unsigned long base_ptr, region_base, region_size; - struct platform_device *pd; - struct resource cf_resources[3]; - unsigned int num_resources; - int i; - int ret = 0; - - /* Setup octeon-cf platform device if present. */ - base_ptr = 0; - if (octeon_bootinfo->major_version == 1 - && octeon_bootinfo->minor_version >= 1) { - if (octeon_bootinfo->compact_flash_common_base_addr) - base_ptr = - octeon_bootinfo->compact_flash_common_base_addr; - } else { - base_ptr = 0x1d000800; - } - - if (!base_ptr) - return ret; - - /* Find CS0 region. */ - for (i = 0; i < 8; i++) { - mio_boot_reg_cfg.u64 = cvmx_read_csr(CVMX_MIO_BOOT_REG_CFGX(i)); - region_base = mio_boot_reg_cfg.s.base << 16; - region_size = (mio_boot_reg_cfg.s.size + 1) << 16; - if (mio_boot_reg_cfg.s.en && base_ptr >= region_base - && base_ptr < region_base + region_size) - break; - } - if (i >= 7) { - /* i and i + 1 are CS0 and CS1, both must be less than 8. */ - goto out; - } - octeon_cf_data.base_region = i; - octeon_cf_data.is16bit = mio_boot_reg_cfg.s.width; - octeon_cf_data.base_region_bias = base_ptr - region_base; - memset(cf_resources, 0, sizeof(cf_resources)); - num_resources = 0; - cf_resources[num_resources].flags = IORESOURCE_MEM; - cf_resources[num_resources].start = region_base; - cf_resources[num_resources].end = region_base + region_size - 1; - num_resources++; - - - if (!(base_ptr & 0xfffful)) { - /* - * Boot loader signals availability of DMA (true_ide - * mode) by setting low order bits of base_ptr to - * zero. - */ - - /* Asume that CS1 immediately follows. */ - mio_boot_reg_cfg.u64 = - cvmx_read_csr(CVMX_MIO_BOOT_REG_CFGX(i + 1)); - region_base = mio_boot_reg_cfg.s.base << 16; - region_size = (mio_boot_reg_cfg.s.size + 1) << 16; - if (!mio_boot_reg_cfg.s.en) - goto out; - - cf_resources[num_resources].flags = IORESOURCE_MEM; - cf_resources[num_resources].start = region_base; - cf_resources[num_resources].end = region_base + region_size - 1; - num_resources++; - - octeon_cf_data.dma_engine = 0; - cf_resources[num_resources].flags = IORESOURCE_IRQ; - cf_resources[num_resources].start = OCTEON_IRQ_BOOTDMA; - cf_resources[num_resources].end = OCTEON_IRQ_BOOTDMA; - num_resources++; - } else { - octeon_cf_data.dma_engine = -1; - } - - pd = platform_device_alloc("pata_octeon_cf", -1); - if (!pd) { - ret = -ENOMEM; - goto out; - } - pd->dev.platform_data = &octeon_cf_data; - - ret = platform_device_add_resources(pd, cf_resources, num_resources); - if (ret) - goto fail; - - ret = platform_device_add(pd); - if (ret) - goto fail; - - return ret; -fail: - platform_device_put(pd); -out: - return ret; -} -device_initcall(octeon_cf_device_init); diff --git a/arch/mips/configs/ar7_defconfig b/arch/mips/configs/ar7_defconfig index dad5b6769d7..35648302f7c 100644 --- a/arch/mips/configs/ar7_defconfig +++ b/arch/mips/configs/ar7_defconfig @@ -125,7 +125,6 @@ CONFIG_CPU_HAS_PREFETCH=y CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMP is not set # CONFIG_MIPS_MT_SMTC is not set -CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y diff --git a/arch/mips/configs/bcm47xx_defconfig b/arch/mips/configs/bcm47xx_defconfig index d8694332b34..94b7d57f906 100644 --- a/arch/mips/configs/bcm47xx_defconfig +++ b/arch/mips/configs/bcm47xx_defconfig @@ -111,7 +111,6 @@ CONFIG_CPU_HAS_PREFETCH=y CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMP is not set # CONFIG_MIPS_MT_SMTC is not set -CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y diff --git a/arch/mips/configs/bcm63xx_defconfig b/arch/mips/configs/bcm63xx_defconfig new file mode 100644 index 00000000000..ea00c18d1f7 --- /dev/null +++ b/arch/mips/configs/bcm63xx_defconfig @@ -0,0 +1,972 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.30-rc6 +# Sun May 31 20:17:18 2009 +# +CONFIG_MIPS=y + +# +# Machine selection +# +# CONFIG_MACH_ALCHEMY is not set +# CONFIG_BASLER_EXCITE is not set +# CONFIG_BCM47XX is not set +CONFIG_BCM63XX=y +# CONFIG_MIPS_COBALT is not set +# CONFIG_MACH_DECSTATION is not set +# CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set +# CONFIG_LEMOTE_FULONG is not set +# CONFIG_MIPS_MALTA is not set +# CONFIG_MIPS_SIM is not set +# CONFIG_NEC_MARKEINS is not set +# CONFIG_MACH_VR41XX is not set +# CONFIG_NXP_STB220 is not set +# CONFIG_NXP_STB225 is not set +# CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set +# CONFIG_PMC_MSP is not set +# CONFIG_PMC_YOSEMITE is not set +# CONFIG_SGI_IP22 is not set +# CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set +# CONFIG_SGI_IP32 is not set +# CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CARMEL is not set +# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_RHONE is not set +# CONFIG_SIBYTE_SWARM is not set +# CONFIG_SIBYTE_LITTLESUR is not set +# CONFIG_SIBYTE_SENTOSA is not set +# CONFIG_SIBYTE_BIGSUR is not set +# CONFIG_SNI_RM is not set +# CONFIG_MACH_TX39XX is not set +# CONFIG_MACH_TX49XX is not set +# CONFIG_MIKROTIK_RB532 is not set +# CONFIG_WR_PPMC is not set +# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set +# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set + +# +# CPU support +# +CONFIG_BCM63XX_CPU_6348=y +CONFIG_BCM63XX_CPU_6358=y +CONFIG_BOARD_BCM963XX=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_CEVT_R4K_LIB=y +CONFIG_CEVT_R4K=y +CONFIG_CSRC_R4K_LIB=y +CONFIG_CSRC_R4K=y +CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NEED_PCI_MAP_STATE=y +CONFIG_EARLY_PRINTK=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +# CONFIG_HOTPLUG_CPU is not set +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_GPIO=y +CONFIG_CPU_BIG_ENDIAN=y +# CONFIG_CPU_LITTLE_ENDIAN is not set +CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y +CONFIG_IRQ_CPU=y +CONFIG_SWAP_IO_SPACE=y +CONFIG_MIPS_L1_CACHE_SHIFT=5 + +# +# CPU selection +# +# CONFIG_CPU_LOONGSON2 is not set +CONFIG_CPU_MIPS32_R1=y +# CONFIG_CPU_MIPS32_R2 is not set +# CONFIG_CPU_MIPS64_R1 is not set +# CONFIG_CPU_MIPS64_R2 is not set +# CONFIG_CPU_R3000 is not set +# CONFIG_CPU_TX39XX is not set +# CONFIG_CPU_VR41XX is not set +# CONFIG_CPU_R4300 is not set +# CONFIG_CPU_R4X00 is not set +# CONFIG_CPU_TX49XX is not set +# CONFIG_CPU_R5000 is not set +# CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R5500 is not set +# CONFIG_CPU_R6000 is not set +# CONFIG_CPU_NEVADA is not set +# CONFIG_CPU_R8000 is not set +# CONFIG_CPU_R10000 is not set +# CONFIG_CPU_RM7000 is not set +# CONFIG_CPU_RM9000 is not set +# CONFIG_CPU_SB1 is not set +# CONFIG_CPU_CAVIUM_OCTEON is not set +CONFIG_SYS_HAS_CPU_MIPS32_R1=y +CONFIG_CPU_MIPS32=y +CONFIG_CPU_MIPSR1=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_HARDWARE_WATCHPOINTS=y + +# +# Kernel type +# +CONFIG_32BIT=y +# CONFIG_64BIT is not set +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_32KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_CPU_HAS_PREFETCH=y +CONFIG_MIPS_MT_DISABLED=y +# CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set +CONFIG_CPU_HAS_LLSC=y +CONFIG_CPU_HAS_SYNC=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_48 is not set +# CONFIG_HZ_100 is not set +# CONFIG_HZ_128 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_256 is not set +# CONFIG_HZ_1000 is not set +# CONFIG_HZ_1024 is not set +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +# CONFIG_KEXEC is not set +# CONFIG_SECCOMP is not set +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +# CONFIG_SYSVIPC is not set +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +# CONFIG_PCSPKR_PLATFORM is not set +CONFIG_BASE_FULL=y +# CONFIG_FUTEX is not set +# CONFIG_EPOLL is not set +# CONFIG_SIGNALFD is not set +# CONFIG_TIMERFD is not set +# CONFIG_EVENTFD is not set +# CONFIG_SHMEM is not set +# CONFIG_AIO is not set +# CONFIG_VM_EVENT_COUNTERS is not set +CONFIG_PCI_QUIRKS=y +# CONFIG_SLUB_DEBUG is not set +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_BASE_SMALL=0 +# CONFIG_MODULES is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_FREEZER is not set + +# +# Bus options (PCI, PCMCIA, EISA, ISA, TC) +# +CONFIG_HW_HAS_PCI=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCI_LEGACY is not set +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set +CONFIG_MMU=y +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y +CONFIG_CARDBUS=y + +# +# PC-card bridges +# +# CONFIG_YENTA is not set +# CONFIG_PD6729 is not set +# CONFIG_I82092 is not set +CONFIG_PCMCIA_BCM63XX=y +# CONFIG_HOTPLUG_PCI is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set +# CONFIG_BINFMT_MISC is not set +CONFIG_TRAD_SIGNALS=y + +# +# Power management options +# +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_PM is not set +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_PACKET is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +# CONFIG_MTD_CHAR is not set +# CONFIG_MTD_BLKDEVS is not set +# CONFIG_MTD_BLOCK is not set +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +# CONFIG_BLK_DEV is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# Enable only one of the two stacks, unless you know what you are doing +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_ARCNET is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +CONFIG_BCM63XX_PHY=y +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_NET_PCI is not set +# CONFIG_B44 is not set +# CONFIG_ATL2 is not set +CONFIG_BCM63XX_ENET=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_NET_PCMCIA is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_DEVKMEM is not set +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_SERIAL_BCM63XX=y +CONFIG_SERIAL_BCM63XX_CONSOLE=y +# CONFIG_UNIX98_PTYS is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +# CONFIG_I2C is not set +# CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# + +# +# PCI GPIO expanders: +# +# CONFIG_GPIO_BT8XX is not set + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +CONFIG_SSB=y +CONFIG_SSB_SPROM=y +CONFIG_SSB_PCIHOST_POSSIBLE=y +CONFIG_SSB_PCIHOST=y +# CONFIG_SSB_B43_PCI_BRIDGE is not set +CONFIG_SSB_PCMCIAHOST_POSSIBLE=y +# CONFIG_SSB_PCMCIAHOST is not set +# CONFIG_SSB_SILENT is not set +# CONFIG_SSB_DEBUG is not set +CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y +# CONFIG_SSB_DRIVER_PCICORE is not set +# CONFIG_SSB_DRIVER_MIPS is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +CONFIG_DISPLAY_SUPPORT=y + +# +# Display hardware drivers +# +# CONFIG_SOUND is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_HCD_SSB is not set +CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y +CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_UWB is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_FILE_LOCKING is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set +# CONFIG_NETWORK_FILESYSTEMS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_CMDLINE="console=ttyS0,115200" + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig index d6d35b2e5fe..13d9eb4736c 100644 --- a/arch/mips/configs/bigsur_defconfig +++ b/arch/mips/configs/bigsur_defconfig @@ -129,7 +129,6 @@ CONFIG_PAGE_SIZE_4KB=y CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMP is not set # CONFIG_MIPS_MT_SMTC is not set -CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y diff --git a/arch/mips/configs/cobalt_defconfig b/arch/mips/configs/cobalt_defconfig index eb44b72254a..6c8cca8589b 100644 --- a/arch/mips/configs/cobalt_defconfig +++ b/arch/mips/configs/cobalt_defconfig @@ -112,7 +112,6 @@ CONFIG_PAGE_SIZE_4KB=y CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMP is not set # CONFIG_MIPS_MT_SMTC is not set -CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig index a279165e3a7..dbdf3bb1a34 100644 --- a/arch/mips/configs/db1000_defconfig +++ b/arch/mips/configs/db1000_defconfig @@ -114,7 +114,6 @@ CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_VPE_LOADER is not set CONFIG_64BIT_PHYS_ADDR=y -CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y diff --git a/arch/mips/configs/db1100_defconfig b/arch/mips/configs/db1100_defconfig index 8944d15caf1..fa681447589 100644 --- a/arch/mips/configs/db1100_defconfig +++ b/arch/mips/configs/db1100_defconfig @@ -114,7 +114,6 @@ CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_VPE_LOADER is not set CONFIG_64BIT_PHYS_ADDR=y -CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y diff --git a/arch/mips/configs/db1200_defconfig b/arch/mips/configs/db1200_defconfig index ab17973107f..d73f1de43b5 100644 --- a/arch/mips/configs/db1200_defconfig +++ b/arch/mips/configs/db1200_defconfig @@ -114,7 +114,6 @@ CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_VPE_LOADER is not set CONFIG_64BIT_PHYS_ADDR=y -CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y diff --git a/arch/mips/configs/db1500_defconfig b/arch/mips/configs/db1500_defconfig index b65803f1935..ec3e028a5b2 100644 --- a/arch/mips/configs/db1500_defconfig +++ b/arch/mips/configs/db1500_defconfig @@ -116,7 +116,6 @@ CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_VPE_LOADER is not set CONFIG_64BIT_PHYS_ADDR=y -CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y diff --git a/arch/mips/configs/db1550_defconfig b/arch/mips/configs/db1550_defconfig index a190ac07740..7631dae51be 100644 --- a/arch/mips/configs/db1550_defconfig +++ b/arch/mips/configs/db1550_defconfig @@ -115,7 +115,6 @@ CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_VPE_LOADER is not set CONFIG_64BIT_PHYS_ADDR=y -CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y diff --git a/arch/mips/configs/excite_defconfig b/arch/mips/configs/excite_defconfig index 4e465e94599..1995d43a2ed 100644 --- a/arch/mips/configs/excite_defconfig +++ b/arch/mips/configs/excite_defconfig @@ -118,7 +118,6 @@ CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_VPE_LOADER is not set # CONFIG_64BIT_PHYS_ADDR is not set -CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y diff --git a/arch/mips/configs/fulong_defconfig b/arch/mips/configs/fuloong2e_defconfig index 786a9bc9a69..0197f0de6b3 100644 --- a/arch/mips/configs/fulong_defconfig +++ b/arch/mips/configs/fuloong2e_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc6 -# Fri Nov 28 17:53:48 2008 +# Linux kernel version: 2.6.31-rc1 +# Thu Jul 2 22:37:00 2009 # CONFIG_MIPS=y @@ -9,16 +9,17 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set +# CONFIG_AR7 is not set # CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set -CONFIG_LEMOTE_FULONG=y +CONFIG_MACH_LOONGSON=y # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SIM is not set -# CONFIG_MACH_EMMA is not set +# CONFIG_NEC_MARKEINS is not set # CONFIG_MACH_VR41XX is not set # CONFIG_NXP_STB220 is not set # CONFIG_NXP_STB225 is not set @@ -43,6 +44,11 @@ CONFIG_LEMOTE_FULONG=y # CONFIG_MACH_TX49XX is not set # CONFIG_MIKROTIK_RB532 is not set # CONFIG_WR_PPMC is not set +# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set +# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set +# CONFIG_ALCHEMY_GPIO_INDIRECT is not set +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_LEMOTE_FULOONG2E=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set @@ -53,15 +59,16 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_CEVT_R4K_LIB=y CONFIG_CEVT_R4K=y +CONFIG_CSRC_R4K_LIB=y CONFIG_CSRC_R4K=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y CONFIG_EARLY_PRINTK=y CONFIG_SYS_HAS_EARLY_PRINTK=y -# CONFIG_HOTPLUG_CPU is not set CONFIG_I8259=y # CONFIG_NO_IOPORT is not set CONFIG_GENERIC_ISA_DMA=y @@ -72,12 +79,11 @@ CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y CONFIG_IRQ_CPU=y CONFIG_BOOT_ELF32=y CONFIG_MIPS_L1_CACHE_SHIFT=5 -CONFIG_HAVE_STD_PC_SERIAL_PORT=y # # CPU selection # -CONFIG_CPU_LOONGSON2=y +CONFIG_CPU_LOONGSON2E=y # CONFIG_CPU_MIPS32_R1 is not set # CONFIG_CPU_MIPS32_R2 is not set # CONFIG_CPU_MIPS64_R1 is not set @@ -98,7 +104,9 @@ CONFIG_CPU_LOONGSON2=y # CONFIG_CPU_RM7000 is not set # CONFIG_CPU_RM9000 is not set # CONFIG_CPU_SB1 is not set -CONFIG_SYS_HAS_CPU_LOONGSON2=y +# CONFIG_CPU_CAVIUM_OCTEON is not set +CONFIG_CPU_LOONGSON2=y +CONFIG_SYS_HAS_CPU_LOONGSON2E=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y @@ -112,6 +120,7 @@ CONFIG_64BIT=y # CONFIG_PAGE_SIZE_4KB is not set # CONFIG_PAGE_SIZE_8KB is not set CONFIG_PAGE_SIZE_16KB=y +# CONFIG_PAGE_SIZE_32KB is not set # CONFIG_PAGE_SIZE_64KB is not set CONFIG_BOARD_SCACHE=y CONFIG_MIPS_MT_DISABLED=y @@ -125,7 +134,6 @@ CONFIG_CPU_SUPPORTS_HIGHMEM=y CONFIG_SYS_SUPPORTS_HIGHMEM=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -135,11 +143,12 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_RESOURCES_64BIT=y CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y @@ -161,6 +170,7 @@ CONFIG_SECCOMP=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -168,21 +178,31 @@ CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="lm32" +CONFIG_LOCALVERSION="-fuloong2e" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -191,9 +211,11 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set CONFIG_USER_NS=y CONFIG_PID_NS=y +# CONFIG_NET_NS is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y @@ -203,29 +225,40 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y # CONFIG_PCSPKR_PLATFORM is not set -# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_COMPAT_BRK is not set CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set CONFIG_PROFILING=y -# CONFIG_MARKERS is not set +CONFIG_TRACEPOINTS=y +CONFIG_MARKERS=y CONFIG_OPROFILE=m CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_SYSCALL_WRAPPERS=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -233,9 +266,7 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y -# CONFIG_BLK_DEV_IO_TRACE is not set CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set CONFIG_BLOCK_COMPAT=y @@ -252,8 +283,7 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y -CONFIG_FREEZER=y +# CONFIG_FREEZER is not set # # Bus options (PCI, PCMCIA, EISA, ISA, TC) @@ -263,6 +293,8 @@ CONFIG_PCI=y CONFIG_PCI_DOMAINS=y # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCI_LEGACY=y +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set CONFIG_ISA=y CONFIG_MMU=y # CONFIG_PCCARD is not set @@ -285,12 +317,12 @@ CONFIG_BINFMT_ELF32=y # # Power management options # +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_PM=y # CONFIG_PM_DEBUG is not set -CONFIG_PM_SLEEP=y -CONFIG_SUSPEND=y -CONFIG_SUSPEND_FREEZER=y +# CONFIG_SUSPEND is not set +# CONFIG_HIBERNATION is not set CONFIG_NET=y # @@ -346,9 +378,11 @@ CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m # CONFIG_NF_CONNTRACK is not set +# CONFIG_NETFILTER_TPROXY is not set CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m # CONFIG_NETFILTER_XT_TARGET_DSCP is not set +CONFIG_NETFILTER_XT_TARGET_HL=m CONFIG_NETFILTER_XT_TARGET_MARK=m # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m @@ -361,6 +395,7 @@ CONFIG_NETFILTER_XT_MATCH_DCCP=m # CONFIG_NETFILTER_XT_MATCH_DSCP is not set CONFIG_NETFILTER_XT_MATCH_ESP=m # CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +CONFIG_NETFILTER_XT_MATCH_HL=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m @@ -381,6 +416,7 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m +# CONFIG_NETFILTER_XT_MATCH_OSF is not set # CONFIG_IP_VS is not set # @@ -419,30 +455,34 @@ CONFIG_IP_NF_ARP_MANGLE=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +CONFIG_PHONET=m +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set # # Network testing # # CONFIG_NET_PKTGEN is not set +# CONFIG_NET_DROP_MONITOR is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -CONFIG_PHONET=m CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y -# CONFIG_MAC80211 is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -# CONFIG_IEEE80211_CRYPT_CCMP is not set -# CONFIG_IEEE80211_CRYPT_TKIP is not set +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set CONFIG_NET_9P=m # CONFIG_NET_9P_DEBUG is not set @@ -466,6 +506,7 @@ CONFIG_MTD=m # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set # CONFIG_MTD_PARTITIONS is not set +# CONFIG_MTD_TESTS is not set # # User Modules And Translation Layers @@ -516,9 +557,7 @@ CONFIG_MTD_CFI_UTIL=m # # CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_PHYSMAP=m -CONFIG_MTD_PHYSMAP_START=0x1fc00000 -CONFIG_MTD_PHYSMAP_LEN=0x80000 -CONFIG_MTD_PHYSMAP_BANKWIDTH=1 +# CONFIG_MTD_PHYSMAP_COMPAT is not set # CONFIG_MTD_INTEL_VR_NOR is not set # CONFIG_MTD_PLATRAM is not set @@ -541,6 +580,11 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1 # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -573,6 +617,7 @@ CONFIG_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_XFER_MODE=y CONFIG_IDE_TIMINGS=y CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set @@ -582,7 +627,6 @@ CONFIG_IDE_GD_ATA=y CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -CONFIG_BLK_DEV_IDESCSI=y CONFIG_IDE_TASK_IOCTL=y CONFIG_IDE_PROC_FS=y @@ -613,6 +657,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8172 is not set # CONFIG_BLK_DEV_IT8213 is not set # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set @@ -660,10 +705,6 @@ CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_LOGGING is not set @@ -681,6 +722,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -690,7 +732,11 @@ CONFIG_SCSI_WAIT_SCAN=m # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -718,6 +764,9 @@ CONFIG_CICADA_PHY=m # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y @@ -729,7 +778,9 @@ CONFIG_MII=y # CONFIG_NET_VENDOR_SMC is not set # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set # CONFIG_NET_VENDOR_RACAL is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_AT1700 is not set # CONFIG_DEPCA is not set @@ -752,7 +803,6 @@ CONFIG_NET_PCI=y # CONFIG_FORCEDETH is not set # CONFIG_CS89x0 is not set # CONFIG_TC35815 is not set -# CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set @@ -766,8 +816,10 @@ CONFIG_8139TOO=y # CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set +# CONFIG_KS8842 is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set @@ -778,6 +830,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -788,17 +841,21 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -808,6 +865,7 @@ CONFIG_NETDEV_10000=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -815,7 +873,10 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # # USB Network Adapters @@ -872,7 +933,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y -CONFIG_KEYBOARD_ATKBD=m +CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set @@ -883,7 +944,6 @@ CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -894,6 +954,7 @@ CONFIG_MOUSE_SERIAL=y # CONFIG_MOUSE_LOGIBM is not set # CONFIG_MOUSE_PC110PAD is not set # CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_SYNAPTICS_I2C is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set @@ -939,10 +1000,13 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +CONFIG_RTC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -1006,19 +1070,20 @@ CONFIG_I2C_VIAPRO=m # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -1041,140 +1106,10 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -CONFIG_VIDEO_DEV=m -CONFIG_VIDEO_V4L2_COMMON=m -CONFIG_VIDEO_ALLOW_V4L1=y -CONFIG_VIDEO_V4L1_COMPAT=y -# CONFIG_DVB_CORE is not set -CONFIG_VIDEO_MEDIA=m - -# -# Multimedia drivers -# -CONFIG_MEDIA_ATTACH=y -CONFIG_MEDIA_TUNER=m -CONFIG_MEDIA_TUNER_CUSTOMIZE=y -CONFIG_MEDIA_TUNER_SIMPLE=m -CONFIG_MEDIA_TUNER_TDA8290=m -CONFIG_MEDIA_TUNER_TDA827X=m -CONFIG_MEDIA_TUNER_TDA18271=m -CONFIG_MEDIA_TUNER_TDA9887=m -CONFIG_MEDIA_TUNER_TEA5761=m -CONFIG_MEDIA_TUNER_TEA5767=m -CONFIG_MEDIA_TUNER_MT20XX=m -CONFIG_MEDIA_TUNER_MT2060=m -CONFIG_MEDIA_TUNER_MT2266=m -CONFIG_MEDIA_TUNER_MT2131=m -CONFIG_MEDIA_TUNER_QT1010=m -CONFIG_MEDIA_TUNER_XC2028=m -CONFIG_MEDIA_TUNER_XC5000=m -CONFIG_MEDIA_TUNER_MXL5005S=m -CONFIG_MEDIA_TUNER_MXL5007T=m -CONFIG_VIDEO_V4L2=m -CONFIG_VIDEO_V4L1=m -CONFIG_VIDEOBUF_GEN=m -CONFIG_VIDEOBUF_VMALLOC=m -CONFIG_VIDEOBUF_DMA_CONTIG=m -CONFIG_VIDEO_CAPTURE_DRIVERS=y -# CONFIG_VIDEO_ADV_DEBUG is not set -# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set -CONFIG_VIDEO_HELPER_CHIPS_AUTO=y -# CONFIG_VIDEO_VIVI is not set -# CONFIG_VIDEO_BT848 is not set -# CONFIG_VIDEO_PMS is not set -# CONFIG_VIDEO_CPIA is not set -# CONFIG_VIDEO_CPIA2 is not set -# CONFIG_VIDEO_SAA5246A is not set -# CONFIG_VIDEO_SAA5249 is not set -# CONFIG_VIDEO_STRADIS is not set -# CONFIG_VIDEO_SAA7134 is not set -# CONFIG_VIDEO_MXB is not set -# CONFIG_VIDEO_HEXIUM_ORION is not set -# CONFIG_VIDEO_HEXIUM_GEMINI is not set -# CONFIG_VIDEO_CX88 is not set -# CONFIG_VIDEO_IVTV is not set -# CONFIG_VIDEO_CAFE_CCIC is not set -CONFIG_SOC_CAMERA=m -CONFIG_SOC_CAMERA_MT9M001=m -CONFIG_SOC_CAMERA_MT9M111=m -CONFIG_SOC_CAMERA_MT9V022=m -CONFIG_SOC_CAMERA_PLATFORM=m -CONFIG_VIDEO_SH_MOBILE_CEU=m -CONFIG_V4L_USB_DRIVERS=y -CONFIG_USB_VIDEO_CLASS=m -CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y -CONFIG_USB_GSPCA=m -CONFIG_USB_M5602=m -CONFIG_USB_GSPCA_CONEX=m -CONFIG_USB_GSPCA_ETOMS=m -CONFIG_USB_GSPCA_FINEPIX=m -CONFIG_USB_GSPCA_MARS=m -CONFIG_USB_GSPCA_OV519=m -CONFIG_USB_GSPCA_PAC207=m -CONFIG_USB_GSPCA_PAC7311=m -CONFIG_USB_GSPCA_SONIXB=m -CONFIG_USB_GSPCA_SONIXJ=m -CONFIG_USB_GSPCA_SPCA500=m -CONFIG_USB_GSPCA_SPCA501=m -CONFIG_USB_GSPCA_SPCA505=m -CONFIG_USB_GSPCA_SPCA506=m -CONFIG_USB_GSPCA_SPCA508=m -CONFIG_USB_GSPCA_SPCA561=m -CONFIG_USB_GSPCA_STK014=m -CONFIG_USB_GSPCA_SUNPLUS=m -CONFIG_USB_GSPCA_T613=m -CONFIG_USB_GSPCA_TV8532=m -CONFIG_USB_GSPCA_VC032X=m -CONFIG_USB_GSPCA_ZC3XX=m -# CONFIG_VIDEO_PVRUSB2 is not set -# CONFIG_VIDEO_EM28XX is not set -# CONFIG_VIDEO_USBVISION is not set -CONFIG_VIDEO_USBVIDEO=m -CONFIG_USB_VICAM=m -CONFIG_USB_IBMCAM=m -CONFIG_USB_KONICAWC=m -CONFIG_USB_QUICKCAM_MESSENGER=m -CONFIG_USB_ET61X251=m -# CONFIG_VIDEO_OVCAMCHIP is not set -CONFIG_USB_OV511=m -CONFIG_USB_SE401=m -CONFIG_USB_SN9C102=m -CONFIG_USB_STV680=m -CONFIG_USB_ZC0301=m -CONFIG_USB_PWC=m -# CONFIG_USB_PWC_DEBUG is not set -# CONFIG_USB_ZR364XX is not set -CONFIG_USB_STKWEBCAM=m -CONFIG_USB_S2255=m -CONFIG_RADIO_ADAPTERS=y -# CONFIG_RADIO_CADET is not set -# CONFIG_RADIO_RTRACK is not set -# CONFIG_RADIO_RTRACK2 is not set -# CONFIG_RADIO_AZTECH is not set -# CONFIG_RADIO_GEMTEK is not set -# CONFIG_RADIO_GEMTEK_PCI is not set -# CONFIG_RADIO_MAXIRADIO is not set -# CONFIG_RADIO_MAESTRO is not set -# CONFIG_RADIO_SF16FMI is not set -# CONFIG_RADIO_SF16FMR2 is not set -# CONFIG_RADIO_TERRATEC is not set -# CONFIG_RADIO_TRUST is not set -# CONFIG_RADIO_TYPHOON is not set -# CONFIG_RADIO_ZOLTRIX is not set -# CONFIG_USB_DSBR is not set -CONFIG_USB_SI470X=m -CONFIG_USB_MR800=m -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1235,12 +1170,13 @@ CONFIG_FB_RADEON_BACKLIGHT=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=m # CONFIG_LCD_ILI9320 is not set # CONFIG_LCD_PLATFORM is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y -# CONFIG_BACKLIGHT_CORGI is not set +CONFIG_BACKLIGHT_GENERIC=y # # Display device support @@ -1273,12 +1209,19 @@ CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_PCM_OSS_PLUGINS=y CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_HRTIMER is not set +# CONFIG_SND_RTCTIMER is not set # CONFIG_SND_DYNAMIC_MINORS is not set CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set CONFIG_SND_VMASTER=y +CONFIG_SND_RAWMIDI_SEQ=m +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set CONFIG_SND_MPU401_UART=m CONFIG_SND_AC97_CODEC=m CONFIG_SND_DRIVERS=y @@ -1305,6 +1248,7 @@ CONFIG_SND_PCI=y # CONFIG_SND_OXYGEN is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set +# CONFIG_SND_CTXFI is not set # CONFIG_SND_DARLA20 is not set # CONFIG_SND_GINA20 is not set # CONFIG_SND_LAYLA20 is not set @@ -1317,6 +1261,8 @@ CONFIG_SND_PCI=y # CONFIG_SND_INDIGO is not set # CONFIG_SND_INDIGOIO is not set # CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_INDIGOIOX is not set +# CONFIG_SND_INDIGODJX is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set @@ -1333,6 +1279,7 @@ CONFIG_SND_PCI=y # CONFIG_SND_INTEL8X0 is not set # CONFIG_SND_INTEL8X0M is not set # CONFIG_SND_KORG1212 is not set +# CONFIG_SND_LX6464ES is not set # CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_MIXART is not set # CONFIG_SND_NM256 is not set @@ -1363,43 +1310,18 @@ CONFIG_HIDRAW=y # # USB Input Devices # -CONFIG_USB_HID=m +# CONFIG_USB_HID is not set CONFIG_HID_PID=y -CONFIG_USB_HIDDEV=y # # USB HID Boot Protocol drivers # -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set +CONFIG_USB_KBD=y +CONFIG_USB_MOUSE=y # # Special HID drivers # -CONFIG_HID_COMPAT=y -CONFIG_HID_A4TECH=m -CONFIG_HID_APPLE=m -CONFIG_HID_BELKIN=m -CONFIG_HID_BRIGHT=m -CONFIG_HID_CHERRY=m -CONFIG_HID_CHICONY=m -CONFIG_HID_CYPRESS=m -CONFIG_HID_DELL=m -CONFIG_HID_EZKEY=m -CONFIG_HID_GYRATION=m -CONFIG_HID_LOGITECH=m -CONFIG_LOGITECH_FF=y -CONFIG_LOGIRUMBLEPAD2_FF=y -CONFIG_HID_MICROSOFT=m -CONFIG_HID_MONTEREY=m -CONFIG_HID_PANTHERLORD=m -# CONFIG_PANTHERLORD_FF is not set -CONFIG_HID_PETALYNX=m -CONFIG_HID_SAMSUNG=m -CONFIG_HID_SONY=m -CONFIG_HID_SUNPLUS=m -# CONFIG_THRUSTMASTER_FF is not set -CONFIG_ZEROPLUS_FF=m CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1427,9 +1349,11 @@ CONFIG_USB_WUSB_CBAF=m # USB Host Controller Drivers # CONFIG_USB_C67X00_HCD=m +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_ISP1760_HCD=m CONFIG_USB_OHCI_HCD=y @@ -1451,18 +1375,17 @@ CONFIG_USB_WDM=m CONFIG_USB_TMC=m # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set @@ -1498,7 +1421,6 @@ CONFIG_USB_SEVSEG=m # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1510,72 +1432,32 @@ CONFIG_USB_SEVSEG=m CONFIG_USB_ISIGHTFW=m CONFIG_USB_VST=m # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=m - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -CONFIG_RTC_INTF_DEV_UIE_EMUL=y -# CONFIG_RTC_DRV_TEST is not set - -# -# I2C RTC drivers -# -# CONFIG_RTC_DRV_DS1307 is not set -# CONFIG_RTC_DRV_DS1374 is not set -# CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_MAX6900 is not set -# CONFIG_RTC_DRV_RS5C372 is not set -# CONFIG_RTC_DRV_ISL1208 is not set -# CONFIG_RTC_DRV_X1205 is not set -# CONFIG_RTC_DRV_PCF8563 is not set -# CONFIG_RTC_DRV_PCF8583 is not set -# CONFIG_RTC_DRV_M41T80 is not set -# CONFIG_RTC_DRV_S35390A is not set -# CONFIG_RTC_DRV_FM3130 is not set -# CONFIG_RTC_DRV_RX8581 is not set - -# -# SPI RTC drivers -# - -# -# Platform RTC drivers -# -CONFIG_RTC_DRV_CMOS=m -# CONFIG_RTC_DRV_DS1286 is not set -# CONFIG_RTC_DRV_DS1511 is not set -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_M48T35 is not set -# CONFIG_RTC_DRV_M48T59 is not set -# CONFIG_RTC_DRV_BQ4802 is not set -# CONFIG_RTC_DRV_V3020 is not set - -# -# on-CPU RTC drivers -# +# CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set CONFIG_UIO=m CONFIG_UIO_CIF=m # CONFIG_UIO_PDRV is not set # CONFIG_UIO_PDRV_GENIRQ is not set # CONFIG_UIO_SMX is not set +# CONFIG_UIO_AEC is not set # CONFIG_UIO_SERCOS3 is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # File systems @@ -1584,6 +1466,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set CONFIG_EXT2_FS_XIP=y CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set CONFIG_EXT4_FS=m CONFIG_EXT4DEV_COMPAT=y @@ -1592,7 +1475,9 @@ CONFIG_EXT4_FS_POSIX_ACL=y CONFIG_EXT4_FS_SECURITY=y CONFIG_FS_XIP=y CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set CONFIG_JBD2=m +# CONFIG_JBD2_DEBUG is not set CONFIG_FS_MBCACHE=m CONFIG_REISERFS_FS=m # CONFIG_REISERFS_CHECK is not set @@ -1600,10 +1485,12 @@ CONFIG_REISERFS_FS=m # CONFIG_REISERFS_FS_XATTR is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1611,6 +1498,12 @@ CONFIG_INOTIFY_USER=y CONFIG_AUTOFS_FS=y CONFIG_AUTOFS4_FS=y CONFIG_FUSE_FS=y +# CONFIG_CUSE is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set # # CD-ROM/DVD Filesystems @@ -1645,10 +1538,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1658,6 +1548,7 @@ CONFIG_TMPFS=y # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set CONFIG_OMFS_FS=m @@ -1666,11 +1557,13 @@ CONFIG_OMFS_FS=m # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_NFSD=m CONFIG_NFSD_V2_ACL=y CONFIG_NFSD_V3=y @@ -1683,7 +1576,6 @@ CONFIG_NFS_ACL_SUPPORT=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=m # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1775,17 +1667,21 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_FRAME_WARN=2048 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set +CONFIG_STACKTRACE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y - -# -# Tracers -# -CONFIG_DYNAMIC_PRINTK_DEBUG=y +CONFIG_NOP_TRACER=y +CONFIG_RING_BUFFER=y +CONFIG_EVENT_TRACING=y +CONFIG_CONTEXT_SWITCH_TRACER=y +CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_CMDLINE="" @@ -1804,13 +1700,21 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_FIPS=y CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y -CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_AUTHENC=m # CONFIG_CRYPTO_TEST is not set @@ -1879,6 +1783,7 @@ CONFIG_CRYPTO_SEED=m # Compression # CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_ZLIB is not set CONFIG_CRYPTO_LZO=m # @@ -1886,11 +1791,13 @@ CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG=m # CONFIG_CRYPTO_HW is not set +CONFIG_BINARY_PRINTF=y # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=y CONFIG_CRC16=m # CONFIG_CRC_T10DIF is not set @@ -1906,7 +1813,7 @@ CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/mips/configs/ip22_defconfig b/arch/mips/configs/ip22_defconfig index 11582287641..f14d38ba603 100644 --- a/arch/mips/configs/ip22_defconfig +++ b/arch/mips/configs/ip22_defconfig @@ -130,7 +130,6 @@ CONFIG_IP22_CPU_SCACHE=y CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMP is not set # CONFIG_MIPS_MT_SMTC is not set -CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig index 0208723adf2..1fc73aa7b50 100644 --- a/arch/mips/configs/ip27_defconfig +++ b/arch/mips/configs/ip27_defconfig @@ -105,7 +105,6 @@ CONFIG_CPU_HAS_PREFETCH=y CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMP is not set # CONFIG_MIPS_MT_SMTC is not set -CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y diff --git a/arch/mips/configs/ip28_defconfig b/arch/mips/configs/ip28_defconfig index 70a744e9a8c..539dccb0345 100644 --- a/arch/mips/configs/ip28_defconfig +++ b/arch/mips/configs/ip28_defconfig @@ -123,7 +123,6 @@ CONFIG_CPU_HAS_PREFETCH=y CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMP is not set # CONFIG_MIPS_MT_SMTC is not set -CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y diff --git a/arch/mips/configs/ip32_defconfig b/arch/mips/configs/ip32_defconfig index de4c7a0a96d..d934bdefb39 100644 --- a/arch/mips/configs/ip32_defconfig +++ b/arch/mips/configs/ip32_defconfig @@ -118,7 +118,6 @@ CONFIG_RM7000_CPU_SCACHE=y CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMP is not set # CONFIG_MIPS_MT_SMTC is not set -CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y diff --git a/arch/mips/configs/jazz_defconfig b/arch/mips/configs/jazz_defconfig index bbacc35d804..d22df61833a 100644 --- a/arch/mips/configs/jazz_defconfig +++ b/arch/mips/configs/jazz_defconfig @@ -119,7 +119,6 @@ CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_VPE_LOADER is not set # CONFIG_64BIT_PHYS_ADDR is not set -CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y diff --git a/arch/mips/configs/lasat_defconfig b/arch/mips/configs/lasat_defconfig index bc9159fda72..044074db7e5 100644 --- a/arch/mips/configs/lasat_defconfig +++ b/arch/mips/configs/lasat_defconfig @@ -108,7 +108,6 @@ CONFIG_R5000_CPU_SCACHE=y CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMP is not set # CONFIG_MIPS_MT_SMTC is not set -CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig index 1ecdd3b65dc..3f01870b4d6 100644 --- a/arch/mips/configs/malta_defconfig +++ b/arch/mips/configs/malta_defconfig @@ -139,7 +139,6 @@ CONFIG_SYS_SUPPORTS_SCHED_SMT=y CONFIG_SYS_SUPPORTS_MULTITHREADING=y CONFIG_MIPS_MT_FPAFF=y # CONFIG_MIPS_VPE_LOADER is not set -CONFIG_CPU_HAS_LLSC=y # CONFIG_CPU_HAS_SMARTMIPS is not set CONFIG_CPU_MIPSR2_IRQ_VI=y CONFIG_CPU_MIPSR2_IRQ_EI=y diff --git a/arch/mips/configs/markeins_defconfig b/arch/mips/configs/markeins_defconfig index bad8901f8f3..d001f7e8741 100644 --- a/arch/mips/configs/markeins_defconfig +++ b/arch/mips/configs/markeins_defconfig @@ -112,7 +112,6 @@ CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_VPE_LOADER is not set # CONFIG_64BIT_PHYS_ADDR is not set -CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y diff --git a/arch/mips/configs/mipssim_defconfig b/arch/mips/configs/mipssim_defconfig index 2c0a6314e90..7358454deaa 100644 --- a/arch/mips/configs/mipssim_defconfig +++ b/arch/mips/configs/mipssim_defconfig @@ -115,7 +115,6 @@ CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMTC is not set CONFIG_SYS_SUPPORTS_MULTITHREADING=y # CONFIG_MIPS_VPE_LOADER is not set -CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y diff --git a/arch/mips/configs/msp71xx_defconfig b/arch/mips/configs/msp71xx_defconfig index 84d6491b3d4..ecbc030b7b6 100644 --- a/arch/mips/configs/msp71xx_defconfig +++ b/arch/mips/configs/msp71xx_defconfig @@ -129,7 +129,6 @@ CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_VPE_LOADER is not set CONFIG_SYS_SUPPORTS_MULTITHREADING=y # CONFIG_64BIT_PHYS_ADDR is not set -CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig index fadb351d249..9477f040796 100644 --- a/arch/mips/configs/mtx1_defconfig +++ b/arch/mips/configs/mtx1_defconfig @@ -116,7 +116,6 @@ CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMP is not set # CONFIG_MIPS_MT_SMTC is not set CONFIG_64BIT_PHYS_ADDR=y -CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y diff --git a/arch/mips/configs/pb1100_defconfig b/arch/mips/configs/pb1100_defconfig index 9e21e333a2f..be8091ef0a7 100644 --- a/arch/mips/configs/pb1100_defconfig +++ b/arch/mips/configs/pb1100_defconfig @@ -115,7 +115,6 @@ CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_VPE_LOADER is not set CONFIG_64BIT_PHYS_ADDR=y -CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y diff --git a/arch/mips/configs/pb1500_defconfig b/arch/mips/configs/pb1500_defconfig index af67ed4f71a..e74ba794c78 100644 --- a/arch/mips/configs/pb1500_defconfig +++ b/arch/mips/configs/pb1500_defconfig @@ -114,7 +114,6 @@ CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_VPE_LOADER is not set CONFIG_64BIT_PHYS_ADDR=y -CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y diff --git a/arch/mips/configs/pb1550_defconfig b/arch/mips/configs/pb1550_defconfig index 7956f56cbf3..1d896fd830d 100644 --- a/arch/mips/configs/pb1550_defconfig +++ b/arch/mips/configs/pb1550_defconfig @@ -115,7 +115,6 @@ CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_VPE_LOADER is not set CONFIG_64BIT_PHYS_ADDR=y -CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y diff --git a/arch/mips/configs/pnx8335-stb225_defconfig b/arch/mips/configs/pnx8335-stb225_defconfig index 2728caa6c2f..fef4d31c205 100644 --- a/arch/mips/configs/pnx8335-stb225_defconfig +++ b/arch/mips/configs/pnx8335-stb225_defconfig @@ -112,7 +112,6 @@ CONFIG_CPU_HAS_PREFETCH=y CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMP is not set # CONFIG_MIPS_MT_SMTC is not set -CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_MIPSR2_IRQ_VI=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y diff --git a/arch/mips/configs/pnx8550-jbs_defconfig b/arch/mips/configs/pnx8550-jbs_defconfig index 723bd5176a3..e10c7116c3c 100644 --- a/arch/mips/configs/pnx8550-jbs_defconfig +++ b/arch/mips/configs/pnx8550-jbs_defconfig @@ -112,7 +112,6 @@ CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_VPE_LOADER is not set # CONFIG_64BIT_PHYS_ADDR is not set -CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y diff --git a/arch/mips/configs/pnx8550-stb810_defconfig b/arch/mips/configs/pnx8550-stb810_defconfig index b5052fb42e9..5ed3c8dfa0a 100644 --- a/arch/mips/configs/pnx8550-stb810_defconfig +++ b/arch/mips/configs/pnx8550-stb810_defconfig @@ -112,7 +112,6 @@ CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_VPE_LOADER is not set # CONFIG_64BIT_PHYS_ADDR is not set -CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y diff --git a/arch/mips/configs/rb532_defconfig b/arch/mips/configs/rb532_defconfig index f28dc32974e..f40c3a04739 100644 --- a/arch/mips/configs/rb532_defconfig +++ b/arch/mips/configs/rb532_defconfig @@ -113,7 +113,6 @@ CONFIG_CPU_HAS_PREFETCH=y CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMP is not set # CONFIG_MIPS_MT_SMTC is not set -CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y diff --git a/arch/mips/configs/rbtx49xx_defconfig b/arch/mips/configs/rbtx49xx_defconfig index 1efe977497d..c69813b8488 100644 --- a/arch/mips/configs/rbtx49xx_defconfig +++ b/arch/mips/configs/rbtx49xx_defconfig @@ -142,7 +142,6 @@ CONFIG_CPU_HAS_PREFETCH=y CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMP is not set # CONFIG_MIPS_MT_SMTC is not set -CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y diff --git a/arch/mips/configs/rm200_defconfig b/arch/mips/configs/rm200_defconfig index 0f4da0325ea..e53b8d096cf 100644 --- a/arch/mips/configs/rm200_defconfig +++ b/arch/mips/configs/rm200_defconfig @@ -124,7 +124,6 @@ CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_VPE_LOADER is not set # CONFIG_64BIT_PHYS_ADDR is not set -CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y diff --git a/arch/mips/configs/sb1250-swarm_defconfig b/arch/mips/configs/sb1250-swarm_defconfig index a9acaa2f9da..7f38c0b956f 100644 --- a/arch/mips/configs/sb1250-swarm_defconfig +++ b/arch/mips/configs/sb1250-swarm_defconfig @@ -133,7 +133,6 @@ CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMP is not set # CONFIG_MIPS_MT_SMTC is not set CONFIG_SB1_PASS_2_WORKAROUNDS=y -CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y diff --git a/arch/mips/configs/wrppmc_defconfig b/arch/mips/configs/wrppmc_defconfig index fc2c56731b9..06acc7482e4 100644 --- a/arch/mips/configs/wrppmc_defconfig +++ b/arch/mips/configs/wrppmc_defconfig @@ -120,7 +120,6 @@ CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_VPE_LOADER is not set # CONFIG_64BIT_PHYS_ADDR is not set -CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y diff --git a/arch/mips/configs/yosemite_defconfig b/arch/mips/configs/yosemite_defconfig index ea8249c75b3..69feaf88b51 100644 --- a/arch/mips/configs/yosemite_defconfig +++ b/arch/mips/configs/yosemite_defconfig @@ -115,7 +115,6 @@ CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_VPE_LOADER is not set # CONFIG_64BIT_PHYS_ADDR is not set -CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y diff --git a/arch/mips/dec/prom/memory.c b/arch/mips/dec/prom/memory.c index 5a557e268f7..e95ff3054ff 100644 --- a/arch/mips/dec/prom/memory.c +++ b/arch/mips/dec/prom/memory.c @@ -18,7 +18,7 @@ #include <asm/sections.h> -volatile unsigned long mem_err = 0; /* So we know an error occurred */ +volatile unsigned long mem_err; /* So we know an error occurred */ /* * Probe memory in 4MB chunks, waiting for an error to tell us we've fallen diff --git a/arch/mips/dec/time.c b/arch/mips/dec/time.c index 463136e6685..02f505f23c3 100644 --- a/arch/mips/dec/time.c +++ b/arch/mips/dec/time.c @@ -18,7 +18,7 @@ #include <asm/dec/ioasic.h> #include <asm/dec/machtype.h> -unsigned long read_persistent_clock(void) +void read_persistent_clock(struct timespec *ts) { unsigned int year, mon, day, hour, min, sec, real_year; unsigned long flags; @@ -53,7 +53,8 @@ unsigned long read_persistent_clock(void) year += real_year - 72 + 2000; - return mktime(year, mon, day, hour, min, sec); + ts->tv_sec = mktime(year, mon, day, hour, min, sec); + ts->tv_nsec = 0; } /* diff --git a/arch/mips/emma/markeins/setup.c b/arch/mips/emma/markeins/setup.c index 335dc8c1a1b..9b3f51e5f14 100644 --- a/arch/mips/emma/markeins/setup.c +++ b/arch/mips/emma/markeins/setup.c @@ -32,7 +32,7 @@ extern void markeins_led(const char *); -static int bus_frequency = 0; +static int bus_frequency; static void markeins_machine_restart(char *command) { diff --git a/arch/mips/fw/arc/Makefile b/arch/mips/fw/arc/Makefile index 4f349ec1ea2..e0aaad482b0 100644 --- a/arch/mips/fw/arc/Makefile +++ b/arch/mips/fw/arc/Makefile @@ -8,3 +8,5 @@ lib-y += cmdline.o env.o file.o identify.o init.o \ lib-$(CONFIG_ARC_MEMORY) += memory.o lib-$(CONFIG_ARC_CONSOLE) += arc_con.o lib-$(CONFIG_ARC_PROMLIB) += promlib.o + +EXTRA_CFLAGS += -Werror diff --git a/arch/mips/fw/cfe/cfe_api.c b/arch/mips/fw/cfe/cfe_api.c index 717db74f7c6..d06dc5a6b8d 100644 --- a/arch/mips/fw/cfe/cfe_api.c +++ b/arch/mips/fw/cfe/cfe_api.c @@ -45,8 +45,8 @@ int cfe_iocb_dispatch(struct cfe_xiocb *xiocb); * passed in two registers each, and CFE expects one. */ -static int (*cfe_dispfunc) (intptr_t handle, intptr_t xiocb) = 0; -static u64 cfe_handle = 0; +static int (*cfe_dispfunc) (intptr_t handle, intptr_t xiocb); +static u64 cfe_handle; int cfe_init(u64 handle, u64 ept) { diff --git a/arch/mips/include/asm/atomic.h b/arch/mips/include/asm/atomic.h index eb7f01cfd1a..dd75d673447 100644 --- a/arch/mips/include/asm/atomic.h +++ b/arch/mips/include/asm/atomic.h @@ -49,7 +49,7 @@ */ static __inline__ void atomic_add(int i, atomic_t * v) { - if (cpu_has_llsc && R10000_LLSC_WAR) { + if (kernel_uses_llsc && R10000_LLSC_WAR) { int temp; __asm__ __volatile__( @@ -61,7 +61,7 @@ static __inline__ void atomic_add(int i, atomic_t * v) " .set mips0 \n" : "=&r" (temp), "=m" (v->counter) : "Ir" (i), "m" (v->counter)); - } else if (cpu_has_llsc) { + } else if (kernel_uses_llsc) { int temp; __asm__ __volatile__( @@ -94,7 +94,7 @@ static __inline__ void atomic_add(int i, atomic_t * v) */ static __inline__ void atomic_sub(int i, atomic_t * v) { - if (cpu_has_llsc && R10000_LLSC_WAR) { + if (kernel_uses_llsc && R10000_LLSC_WAR) { int temp; __asm__ __volatile__( @@ -106,7 +106,7 @@ static __inline__ void atomic_sub(int i, atomic_t * v) " .set mips0 \n" : "=&r" (temp), "=m" (v->counter) : "Ir" (i), "m" (v->counter)); - } else if (cpu_has_llsc) { + } else if (kernel_uses_llsc) { int temp; __asm__ __volatile__( @@ -139,7 +139,7 @@ static __inline__ int atomic_add_return(int i, atomic_t * v) smp_llsc_mb(); - if (cpu_has_llsc && R10000_LLSC_WAR) { + if (kernel_uses_llsc && R10000_LLSC_WAR) { int temp; __asm__ __volatile__( @@ -153,7 +153,7 @@ static __inline__ int atomic_add_return(int i, atomic_t * v) : "=&r" (result), "=&r" (temp), "=m" (v->counter) : "Ir" (i), "m" (v->counter) : "memory"); - } else if (cpu_has_llsc) { + } else if (kernel_uses_llsc) { int temp; __asm__ __volatile__( @@ -191,7 +191,7 @@ static __inline__ int atomic_sub_return(int i, atomic_t * v) smp_llsc_mb(); - if (cpu_has_llsc && R10000_LLSC_WAR) { + if (kernel_uses_llsc && R10000_LLSC_WAR) { int temp; __asm__ __volatile__( @@ -205,7 +205,7 @@ static __inline__ int atomic_sub_return(int i, atomic_t * v) : "=&r" (result), "=&r" (temp), "=m" (v->counter) : "Ir" (i), "m" (v->counter) : "memory"); - } else if (cpu_has_llsc) { + } else if (kernel_uses_llsc) { int temp; __asm__ __volatile__( @@ -251,7 +251,7 @@ static __inline__ int atomic_sub_if_positive(int i, atomic_t * v) smp_llsc_mb(); - if (cpu_has_llsc && R10000_LLSC_WAR) { + if (kernel_uses_llsc && R10000_LLSC_WAR) { int temp; __asm__ __volatile__( @@ -269,7 +269,7 @@ static __inline__ int atomic_sub_if_positive(int i, atomic_t * v) : "=&r" (result), "=&r" (temp), "=m" (v->counter) : "Ir" (i), "m" (v->counter) : "memory"); - } else if (cpu_has_llsc) { + } else if (kernel_uses_llsc) { int temp; __asm__ __volatile__( @@ -428,7 +428,7 @@ static __inline__ int atomic_add_unless(atomic_t *v, int a, int u) */ static __inline__ void atomic64_add(long i, atomic64_t * v) { - if (cpu_has_llsc && R10000_LLSC_WAR) { + if (kernel_uses_llsc && R10000_LLSC_WAR) { long temp; __asm__ __volatile__( @@ -440,7 +440,7 @@ static __inline__ void atomic64_add(long i, atomic64_t * v) " .set mips0 \n" : "=&r" (temp), "=m" (v->counter) : "Ir" (i), "m" (v->counter)); - } else if (cpu_has_llsc) { + } else if (kernel_uses_llsc) { long temp; __asm__ __volatile__( @@ -473,7 +473,7 @@ static __inline__ void atomic64_add(long i, atomic64_t * v) */ static __inline__ void atomic64_sub(long i, atomic64_t * v) { - if (cpu_has_llsc && R10000_LLSC_WAR) { + if (kernel_uses_llsc && R10000_LLSC_WAR) { long temp; __asm__ __volatile__( @@ -485,7 +485,7 @@ static __inline__ void atomic64_sub(long i, atomic64_t * v) " .set mips0 \n" : "=&r" (temp), "=m" (v->counter) : "Ir" (i), "m" (v->counter)); - } else if (cpu_has_llsc) { + } else if (kernel_uses_llsc) { long temp; __asm__ __volatile__( @@ -518,7 +518,7 @@ static __inline__ long atomic64_add_return(long i, atomic64_t * v) smp_llsc_mb(); - if (cpu_has_llsc && R10000_LLSC_WAR) { + if (kernel_uses_llsc && R10000_LLSC_WAR) { long temp; __asm__ __volatile__( @@ -532,7 +532,7 @@ static __inline__ long atomic64_add_return(long i, atomic64_t * v) : "=&r" (result), "=&r" (temp), "=m" (v->counter) : "Ir" (i), "m" (v->counter) : "memory"); - } else if (cpu_has_llsc) { + } else if (kernel_uses_llsc) { long temp; __asm__ __volatile__( @@ -570,7 +570,7 @@ static __inline__ long atomic64_sub_return(long i, atomic64_t * v) smp_llsc_mb(); - if (cpu_has_llsc && R10000_LLSC_WAR) { + if (kernel_uses_llsc && R10000_LLSC_WAR) { long temp; __asm__ __volatile__( @@ -584,7 +584,7 @@ static __inline__ long atomic64_sub_return(long i, atomic64_t * v) : "=&r" (result), "=&r" (temp), "=m" (v->counter) : "Ir" (i), "m" (v->counter) : "memory"); - } else if (cpu_has_llsc) { + } else if (kernel_uses_llsc) { long temp; __asm__ __volatile__( @@ -630,7 +630,7 @@ static __inline__ long atomic64_sub_if_positive(long i, atomic64_t * v) smp_llsc_mb(); - if (cpu_has_llsc && R10000_LLSC_WAR) { + if (kernel_uses_llsc && R10000_LLSC_WAR) { long temp; __asm__ __volatile__( @@ -648,7 +648,7 @@ static __inline__ long atomic64_sub_if_positive(long i, atomic64_t * v) : "=&r" (result), "=&r" (temp), "=m" (v->counter) : "Ir" (i), "m" (v->counter) : "memory"); - } else if (cpu_has_llsc) { + } else if (kernel_uses_llsc) { long temp; __asm__ __volatile__( diff --git a/arch/mips/include/asm/bitops.h b/arch/mips/include/asm/bitops.h index b1e9e97a9c7..84a383806b2 100644 --- a/arch/mips/include/asm/bitops.h +++ b/arch/mips/include/asm/bitops.h @@ -61,7 +61,7 @@ static inline void set_bit(unsigned long nr, volatile unsigned long *addr) unsigned short bit = nr & SZLONG_MASK; unsigned long temp; - if (cpu_has_llsc && R10000_LLSC_WAR) { + if (kernel_uses_llsc && R10000_LLSC_WAR) { __asm__ __volatile__( " .set mips3 \n" "1: " __LL "%0, %1 # set_bit \n" @@ -72,7 +72,7 @@ static inline void set_bit(unsigned long nr, volatile unsigned long *addr) : "=&r" (temp), "=m" (*m) : "ir" (1UL << bit), "m" (*m)); #ifdef CONFIG_CPU_MIPSR2 - } else if (__builtin_constant_p(bit)) { + } else if (kernel_uses_llsc && __builtin_constant_p(bit)) { __asm__ __volatile__( "1: " __LL "%0, %1 # set_bit \n" " " __INS "%0, %4, %2, 1 \n" @@ -84,7 +84,7 @@ static inline void set_bit(unsigned long nr, volatile unsigned long *addr) : "=&r" (temp), "=m" (*m) : "ir" (bit), "m" (*m), "r" (~0)); #endif /* CONFIG_CPU_MIPSR2 */ - } else if (cpu_has_llsc) { + } else if (kernel_uses_llsc) { __asm__ __volatile__( " .set mips3 \n" "1: " __LL "%0, %1 # set_bit \n" @@ -126,7 +126,7 @@ static inline void clear_bit(unsigned long nr, volatile unsigned long *addr) unsigned short bit = nr & SZLONG_MASK; unsigned long temp; - if (cpu_has_llsc && R10000_LLSC_WAR) { + if (kernel_uses_llsc && R10000_LLSC_WAR) { __asm__ __volatile__( " .set mips3 \n" "1: " __LL "%0, %1 # clear_bit \n" @@ -137,7 +137,7 @@ static inline void clear_bit(unsigned long nr, volatile unsigned long *addr) : "=&r" (temp), "=m" (*m) : "ir" (~(1UL << bit)), "m" (*m)); #ifdef CONFIG_CPU_MIPSR2 - } else if (__builtin_constant_p(bit)) { + } else if (kernel_uses_llsc && __builtin_constant_p(bit)) { __asm__ __volatile__( "1: " __LL "%0, %1 # clear_bit \n" " " __INS "%0, $0, %2, 1 \n" @@ -149,7 +149,7 @@ static inline void clear_bit(unsigned long nr, volatile unsigned long *addr) : "=&r" (temp), "=m" (*m) : "ir" (bit), "m" (*m)); #endif /* CONFIG_CPU_MIPSR2 */ - } else if (cpu_has_llsc) { + } else if (kernel_uses_llsc) { __asm__ __volatile__( " .set mips3 \n" "1: " __LL "%0, %1 # clear_bit \n" @@ -202,7 +202,7 @@ static inline void change_bit(unsigned long nr, volatile unsigned long *addr) { unsigned short bit = nr & SZLONG_MASK; - if (cpu_has_llsc && R10000_LLSC_WAR) { + if (kernel_uses_llsc && R10000_LLSC_WAR) { unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); unsigned long temp; @@ -215,7 +215,7 @@ static inline void change_bit(unsigned long nr, volatile unsigned long *addr) " .set mips0 \n" : "=&r" (temp), "=m" (*m) : "ir" (1UL << bit), "m" (*m)); - } else if (cpu_has_llsc) { + } else if (kernel_uses_llsc) { unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); unsigned long temp; @@ -260,7 +260,7 @@ static inline int test_and_set_bit(unsigned long nr, smp_llsc_mb(); - if (cpu_has_llsc && R10000_LLSC_WAR) { + if (kernel_uses_llsc && R10000_LLSC_WAR) { unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); unsigned long temp; @@ -275,7 +275,7 @@ static inline int test_and_set_bit(unsigned long nr, : "=&r" (temp), "=m" (*m), "=&r" (res) : "r" (1UL << bit), "m" (*m) : "memory"); - } else if (cpu_has_llsc) { + } else if (kernel_uses_llsc) { unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); unsigned long temp; @@ -328,7 +328,7 @@ static inline int test_and_set_bit_lock(unsigned long nr, unsigned short bit = nr & SZLONG_MASK; unsigned long res; - if (cpu_has_llsc && R10000_LLSC_WAR) { + if (kernel_uses_llsc && R10000_LLSC_WAR) { unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); unsigned long temp; @@ -343,7 +343,7 @@ static inline int test_and_set_bit_lock(unsigned long nr, : "=&r" (temp), "=m" (*m), "=&r" (res) : "r" (1UL << bit), "m" (*m) : "memory"); - } else if (cpu_has_llsc) { + } else if (kernel_uses_llsc) { unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); unsigned long temp; @@ -397,7 +397,7 @@ static inline int test_and_clear_bit(unsigned long nr, smp_llsc_mb(); - if (cpu_has_llsc && R10000_LLSC_WAR) { + if (kernel_uses_llsc && R10000_LLSC_WAR) { unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); unsigned long temp; @@ -414,7 +414,7 @@ static inline int test_and_clear_bit(unsigned long nr, : "r" (1UL << bit), "m" (*m) : "memory"); #ifdef CONFIG_CPU_MIPSR2 - } else if (__builtin_constant_p(nr)) { + } else if (kernel_uses_llsc && __builtin_constant_p(nr)) { unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); unsigned long temp; @@ -431,7 +431,7 @@ static inline int test_and_clear_bit(unsigned long nr, : "ir" (bit), "m" (*m) : "memory"); #endif - } else if (cpu_has_llsc) { + } else if (kernel_uses_llsc) { unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); unsigned long temp; @@ -487,7 +487,7 @@ static inline int test_and_change_bit(unsigned long nr, smp_llsc_mb(); - if (cpu_has_llsc && R10000_LLSC_WAR) { + if (kernel_uses_llsc && R10000_LLSC_WAR) { unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); unsigned long temp; @@ -502,7 +502,7 @@ static inline int test_and_change_bit(unsigned long nr, : "=&r" (temp), "=m" (*m), "=&r" (res) : "r" (1UL << bit), "m" (*m) : "memory"); - } else if (cpu_has_llsc) { + } else if (kernel_uses_llsc) { unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); unsigned long temp; diff --git a/arch/mips/include/asm/bootinfo.h b/arch/mips/include/asm/bootinfo.h index 610fe3af7a0..f5dfaf6a160 100644 --- a/arch/mips/include/asm/bootinfo.h +++ b/arch/mips/include/asm/bootinfo.h @@ -7,6 +7,7 @@ * Copyright (C) 1995, 1996 Andreas Busse * Copyright (C) 1995, 1996 Stoned Elipot * Copyright (C) 1995, 1996 Paul M. Antoine. + * Copyright (C) 2009 Zhang Le */ #ifndef _ASM_BOOTINFO_H #define _ASM_BOOTINFO_H @@ -57,6 +58,17 @@ #define MACH_MIKROTIK_RB532 0 /* Mikrotik RouterBoard 532 */ #define MACH_MIKROTIK_RB532A 1 /* Mikrotik RouterBoard 532A */ +/* + * Valid machtype for Loongson family + */ +#define MACH_LOONGSON_UNKNOWN 0 +#define MACH_LEMOTE_FL2E 1 +#define MACH_LEMOTE_FL2F 2 +#define MACH_LEMOTE_ML2F7 3 +#define MACH_LEMOTE_YL2F89 4 +#define MACH_DEXXON_GDIUM2F10 5 +#define MACH_LOONGSON_END 6 + #define CL_SIZE COMMAND_LINE_SIZE extern char *system_type; diff --git a/arch/mips/include/asm/cmpxchg.h b/arch/mips/include/asm/cmpxchg.h index 4a812c3ceb9..815a438a268 100644 --- a/arch/mips/include/asm/cmpxchg.h +++ b/arch/mips/include/asm/cmpxchg.h @@ -16,7 +16,7 @@ ({ \ __typeof(*(m)) __ret; \ \ - if (cpu_has_llsc && R10000_LLSC_WAR) { \ + if (kernel_uses_llsc && R10000_LLSC_WAR) { \ __asm__ __volatile__( \ " .set push \n" \ " .set noat \n" \ @@ -33,7 +33,7 @@ : "=&r" (__ret), "=R" (*m) \ : "R" (*m), "Jr" (old), "Jr" (new) \ : "memory"); \ - } else if (cpu_has_llsc) { \ + } else if (kernel_uses_llsc) { \ __asm__ __volatile__( \ " .set push \n" \ " .set noat \n" \ diff --git a/arch/mips/include/asm/cpu-features.h b/arch/mips/include/asm/cpu-features.h index 8ab1d12ba7f..1f4df647c38 100644 --- a/arch/mips/include/asm/cpu-features.h +++ b/arch/mips/include/asm/cpu-features.h @@ -80,6 +80,9 @@ #ifndef cpu_has_llsc #define cpu_has_llsc (cpu_data[0].options & MIPS_CPU_LLSC) #endif +#ifndef kernel_uses_llsc +#define kernel_uses_llsc cpu_has_llsc +#endif #ifndef cpu_has_mips16 #define cpu_has_mips16 (cpu_data[0].ases & MIPS_ASE_MIPS16) #endif diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h index 3bdc0e3d89c..4b96d1a3605 100644 --- a/arch/mips/include/asm/cpu.h +++ b/arch/mips/include/asm/cpu.h @@ -113,6 +113,12 @@ #define PRID_IMP_BCM4710 0x4000 #define PRID_IMP_BCM3302 0x9000 +#define PRID_IMP_BCM6338 0x9000 +#define PRID_IMP_BCM6345 0x8000 +#define PRID_IMP_BCM6348 0x9100 +#define PRID_IMP_BCM4350 0xA000 +#define PRID_REV_BCM6358 0x0010 +#define PRID_REV_BCM6368 0x0030 /* * These are the PRID's for when 23:16 == PRID_COMP_CAVIUM @@ -210,6 +216,7 @@ enum cpu_type_enum { */ CPU_4KC, CPU_4KEC, CPU_4KSC, CPU_24K, CPU_34K, CPU_1004K, CPU_74K, CPU_ALCHEMY, CPU_PR4450, CPU_BCM3302, CPU_BCM4710, + CPU_BCM6338, CPU_BCM6345, CPU_BCM6348, CPU_BCM6358, /* * MIPS64 class processors diff --git a/arch/mips/include/asm/delay.h b/arch/mips/include/asm/delay.h index d2d8949be6b..e7cd78277c2 100644 --- a/arch/mips/include/asm/delay.h +++ b/arch/mips/include/asm/delay.h @@ -11,6 +11,8 @@ #ifndef _ASM_DELAY_H #define _ASM_DELAY_H +#include <linux/param.h> + extern void __delay(unsigned int loops); extern void __ndelay(unsigned int ns); extern void __udelay(unsigned int us); diff --git a/arch/mips/include/asm/fixmap.h b/arch/mips/include/asm/fixmap.h index 0f5caa1307f..efeddc8db8b 100644 --- a/arch/mips/include/asm/fixmap.h +++ b/arch/mips/include/asm/fixmap.h @@ -67,11 +67,15 @@ enum fixed_addresses { * the start of the fixmap, and leave one page empty * at the top of mem.. */ +#ifdef CONFIG_BCM63XX +#define FIXADDR_TOP ((unsigned long)(long)(int)0xff000000) +#else #if defined(CONFIG_CPU_TX39XX) || defined(CONFIG_CPU_TX49XX) #define FIXADDR_TOP ((unsigned long)(long)(int)(0xff000000 - 0x20000)) #else #define FIXADDR_TOP ((unsigned long)(long)(int)0xfffe0000) #endif +#endif #define FIXADDR_SIZE (__end_of_fixed_addresses << PAGE_SHIFT) #define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE) diff --git a/arch/mips/include/asm/hardirq.h b/arch/mips/include/asm/hardirq.h index 90bf399e6dd..c977a86c2c6 100644 --- a/arch/mips/include/asm/hardirq.h +++ b/arch/mips/include/asm/hardirq.h @@ -10,15 +10,9 @@ #ifndef _ASM_HARDIRQ_H #define _ASM_HARDIRQ_H -#include <linux/threads.h> -#include <linux/irq.h> - -typedef struct { - unsigned int __softirq_pending; -} ____cacheline_aligned irq_cpustat_t; - -#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */ - extern void ack_bad_irq(unsigned int irq); +#define ack_bad_irq ack_bad_irq + +#include <asm-generic/hardirq.h> #endif /* _ASM_HARDIRQ_H */ diff --git a/arch/mips/include/asm/lasat/lasat.h b/arch/mips/include/asm/lasat/lasat.h index caeba1e302a..a1ada1c27c1 100644 --- a/arch/mips/include/asm/lasat/lasat.h +++ b/arch/mips/include/asm/lasat/lasat.h @@ -227,6 +227,7 @@ extern void lasat_write_eeprom_info(void); * It is used for the bit-banging rtc and eeprom drivers */ #include <linux/delay.h> +#include <linux/smp.h> /* calculating with the slowest board with 100 MHz clock */ #define LASAT_100_DIVIDER 20 diff --git a/arch/mips/include/asm/local.h b/arch/mips/include/asm/local.h index f96fd59e084..361f4f16c30 100644 --- a/arch/mips/include/asm/local.h +++ b/arch/mips/include/asm/local.h @@ -29,7 +29,7 @@ static __inline__ long local_add_return(long i, local_t * l) { unsigned long result; - if (cpu_has_llsc && R10000_LLSC_WAR) { + if (kernel_uses_llsc && R10000_LLSC_WAR) { unsigned long temp; __asm__ __volatile__( @@ -43,7 +43,7 @@ static __inline__ long local_add_return(long i, local_t * l) : "=&r" (result), "=&r" (temp), "=m" (l->a.counter) : "Ir" (i), "m" (l->a.counter) : "memory"); - } else if (cpu_has_llsc) { + } else if (kernel_uses_llsc) { unsigned long temp; __asm__ __volatile__( @@ -74,7 +74,7 @@ static __inline__ long local_sub_return(long i, local_t * l) { unsigned long result; - if (cpu_has_llsc && R10000_LLSC_WAR) { + if (kernel_uses_llsc && R10000_LLSC_WAR) { unsigned long temp; __asm__ __volatile__( @@ -88,7 +88,7 @@ static __inline__ long local_sub_return(long i, local_t * l) : "=&r" (result), "=&r" (temp), "=m" (l->a.counter) : "Ir" (i), "m" (l->a.counter) : "memory"); - } else if (cpu_has_llsc) { + } else if (kernel_uses_llsc) { unsigned long temp; __asm__ __volatile__( diff --git a/arch/mips/include/asm/mach-au1x00/gpio-au1000.h b/arch/mips/include/asm/mach-au1x00/gpio-au1000.h index 127d4ed9f07..feea00148b5 100644 --- a/arch/mips/include/asm/mach-au1x00/gpio-au1000.h +++ b/arch/mips/include/asm/mach-au1x00/gpio-au1000.h @@ -578,6 +578,15 @@ static inline int irq_to_gpio(int irq) return alchemy_irq_to_gpio(irq); } +static inline int gpio_request(unsigned gpio, const char *label) +{ + return 0; +} + +static inline void gpio_free(unsigned gpio) +{ +} + #endif /* !CONFIG_ALCHEMY_GPIO_INDIRECT */ diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_board.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_board.h new file mode 100644 index 00000000000..fa3e7e617b0 --- /dev/null +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_board.h @@ -0,0 +1,12 @@ +#ifndef BCM63XX_BOARD_H_ +#define BCM63XX_BOARD_H_ + +const char *board_get_name(void); + +void board_prom_init(void); + +void board_setup(void); + +int board_register_devices(void); + +#endif /* ! BCM63XX_BOARD_H_ */ diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_clk.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_clk.h new file mode 100644 index 00000000000..8fcf8df4418 --- /dev/null +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_clk.h @@ -0,0 +1,11 @@ +#ifndef BCM63XX_CLK_H_ +#define BCM63XX_CLK_H_ + +struct clk { + void (*set)(struct clk *, int); + unsigned int rate; + unsigned int usage; + int id; +}; + +#endif /* ! BCM63XX_CLK_H_ */ diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h new file mode 100644 index 00000000000..b12c4aca2cc --- /dev/null +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h @@ -0,0 +1,538 @@ +#ifndef BCM63XX_CPU_H_ +#define BCM63XX_CPU_H_ + +#include <linux/types.h> +#include <linux/init.h> + +/* + * Macro to fetch bcm63xx cpu id and revision, should be optimized at + * compile time if only one CPU support is enabled (idea stolen from + * arm mach-types) + */ +#define BCM6338_CPU_ID 0x6338 +#define BCM6345_CPU_ID 0x6345 +#define BCM6348_CPU_ID 0x6348 +#define BCM6358_CPU_ID 0x6358 + +void __init bcm63xx_cpu_init(void); +u16 __bcm63xx_get_cpu_id(void); +u16 bcm63xx_get_cpu_rev(void); +unsigned int bcm63xx_get_cpu_freq(void); + +#ifdef CONFIG_BCM63XX_CPU_6338 +# ifdef bcm63xx_get_cpu_id +# undef bcm63xx_get_cpu_id +# define bcm63xx_get_cpu_id() __bcm63xx_get_cpu_id() +# define BCMCPU_RUNTIME_DETECT +# else +# define bcm63xx_get_cpu_id() BCM6338_CPU_ID +# endif +# define BCMCPU_IS_6338() (bcm63xx_get_cpu_id() == BCM6338_CPU_ID) +#else +# define BCMCPU_IS_6338() (0) +#endif + +#ifdef CONFIG_BCM63XX_CPU_6345 +# ifdef bcm63xx_get_cpu_id +# undef bcm63xx_get_cpu_id +# define bcm63xx_get_cpu_id() __bcm63xx_get_cpu_id() +# define BCMCPU_RUNTIME_DETECT +# else +# define bcm63xx_get_cpu_id() BCM6345_CPU_ID +# endif +# define BCMCPU_IS_6345() (bcm63xx_get_cpu_id() == BCM6345_CPU_ID) +#else +# define BCMCPU_IS_6345() (0) +#endif + +#ifdef CONFIG_BCM63XX_CPU_6348 +# ifdef bcm63xx_get_cpu_id +# undef bcm63xx_get_cpu_id +# define bcm63xx_get_cpu_id() __bcm63xx_get_cpu_id() +# define BCMCPU_RUNTIME_DETECT +# else +# define bcm63xx_get_cpu_id() BCM6348_CPU_ID +# endif +# define BCMCPU_IS_6348() (bcm63xx_get_cpu_id() == BCM6348_CPU_ID) +#else +# define BCMCPU_IS_6348() (0) +#endif + +#ifdef CONFIG_BCM63XX_CPU_6358 +# ifdef bcm63xx_get_cpu_id +# undef bcm63xx_get_cpu_id +# define bcm63xx_get_cpu_id() __bcm63xx_get_cpu_id() +# define BCMCPU_RUNTIME_DETECT +# else +# define bcm63xx_get_cpu_id() BCM6358_CPU_ID +# endif +# define BCMCPU_IS_6358() (bcm63xx_get_cpu_id() == BCM6358_CPU_ID) +#else +# define BCMCPU_IS_6358() (0) +#endif + +#ifndef bcm63xx_get_cpu_id +#error "No CPU support configured" +#endif + +/* + * While registers sets are (mostly) the same across 63xx CPU, base + * address of these sets do change. + */ +enum bcm63xx_regs_set { + RSET_DSL_LMEM = 0, + RSET_PERF, + RSET_TIMER, + RSET_WDT, + RSET_UART0, + RSET_GPIO, + RSET_SPI, + RSET_UDC0, + RSET_OHCI0, + RSET_OHCI_PRIV, + RSET_USBH_PRIV, + RSET_MPI, + RSET_PCMCIA, + RSET_DSL, + RSET_ENET0, + RSET_ENET1, + RSET_ENETDMA, + RSET_EHCI0, + RSET_SDRAM, + RSET_MEMC, + RSET_DDR, +}; + +#define RSET_DSL_LMEM_SIZE (64 * 1024 * 4) +#define RSET_DSL_SIZE 4096 +#define RSET_WDT_SIZE 12 +#define RSET_ENET_SIZE 2048 +#define RSET_ENETDMA_SIZE 2048 +#define RSET_UART_SIZE 24 +#define RSET_UDC_SIZE 256 +#define RSET_OHCI_SIZE 256 +#define RSET_EHCI_SIZE 256 +#define RSET_PCMCIA_SIZE 12 + +/* + * 6338 register sets base address + */ +#define BCM_6338_DSL_LMEM_BASE (0xfff00000) +#define BCM_6338_PERF_BASE (0xfffe0000) +#define BCM_6338_BB_BASE (0xfffe0100) +#define BCM_6338_TIMER_BASE (0xfffe0200) +#define BCM_6338_WDT_BASE (0xfffe021c) +#define BCM_6338_UART0_BASE (0xfffe0300) +#define BCM_6338_GPIO_BASE (0xfffe0400) +#define BCM_6338_SPI_BASE (0xfffe0c00) +#define BCM_6338_UDC0_BASE (0xdeadbeef) +#define BCM_6338_USBDMA_BASE (0xfffe2400) +#define BCM_6338_OHCI0_BASE (0xdeadbeef) +#define BCM_6338_OHCI_PRIV_BASE (0xfffe3000) +#define BCM_6338_USBH_PRIV_BASE (0xdeadbeef) +#define BCM_6338_MPI_BASE (0xfffe3160) +#define BCM_6338_PCMCIA_BASE (0xdeadbeef) +#define BCM_6338_SDRAM_REGS_BASE (0xfffe3100) +#define BCM_6338_DSL_BASE (0xfffe1000) +#define BCM_6338_SAR_BASE (0xfffe2000) +#define BCM_6338_UBUS_BASE (0xdeadbeef) +#define BCM_6338_ENET0_BASE (0xfffe2800) +#define BCM_6338_ENET1_BASE (0xdeadbeef) +#define BCM_6338_ENETDMA_BASE (0xfffe2400) +#define BCM_6338_EHCI0_BASE (0xdeadbeef) +#define BCM_6338_SDRAM_BASE (0xfffe3100) +#define BCM_6338_MEMC_BASE (0xdeadbeef) +#define BCM_6338_DDR_BASE (0xdeadbeef) + +/* + * 6345 register sets base address + */ +#define BCM_6345_DSL_LMEM_BASE (0xfff00000) +#define BCM_6345_PERF_BASE (0xfffe0000) +#define BCM_6345_BB_BASE (0xfffe0100) +#define BCM_6345_TIMER_BASE (0xfffe0200) +#define BCM_6345_WDT_BASE (0xfffe021c) +#define BCM_6345_UART0_BASE (0xfffe0300) +#define BCM_6345_GPIO_BASE (0xfffe0400) +#define BCM_6345_SPI_BASE (0xdeadbeef) +#define BCM_6345_UDC0_BASE (0xdeadbeef) +#define BCM_6345_USBDMA_BASE (0xfffe2800) +#define BCM_6345_ENET0_BASE (0xfffe1800) +#define BCM_6345_ENETDMA_BASE (0xfffe2800) +#define BCM_6345_PCMCIA_BASE (0xfffe2028) +#define BCM_6345_MPI_BASE (0xdeadbeef) +#define BCM_6345_OHCI0_BASE (0xfffe2100) +#define BCM_6345_OHCI_PRIV_BASE (0xfffe2200) +#define BCM_6345_USBH_PRIV_BASE (0xdeadbeef) +#define BCM_6345_SDRAM_REGS_BASE (0xfffe2300) +#define BCM_6345_DSL_BASE (0xdeadbeef) +#define BCM_6345_SAR_BASE (0xdeadbeef) +#define BCM_6345_UBUS_BASE (0xdeadbeef) +#define BCM_6345_ENET1_BASE (0xdeadbeef) +#define BCM_6345_EHCI0_BASE (0xdeadbeef) +#define BCM_6345_SDRAM_BASE (0xfffe2300) +#define BCM_6345_MEMC_BASE (0xdeadbeef) +#define BCM_6345_DDR_BASE (0xdeadbeef) + +/* + * 6348 register sets base address + */ +#define BCM_6348_DSL_LMEM_BASE (0xfff00000) +#define BCM_6348_PERF_BASE (0xfffe0000) +#define BCM_6348_TIMER_BASE (0xfffe0200) +#define BCM_6348_WDT_BASE (0xfffe021c) +#define BCM_6348_UART0_BASE (0xfffe0300) +#define BCM_6348_GPIO_BASE (0xfffe0400) +#define BCM_6348_SPI_BASE (0xfffe0c00) +#define BCM_6348_UDC0_BASE (0xfffe1000) +#define BCM_6348_OHCI0_BASE (0xfffe1b00) +#define BCM_6348_OHCI_PRIV_BASE (0xfffe1c00) +#define BCM_6348_USBH_PRIV_BASE (0xdeadbeef) +#define BCM_6348_MPI_BASE (0xfffe2000) +#define BCM_6348_PCMCIA_BASE (0xfffe2054) +#define BCM_6348_SDRAM_REGS_BASE (0xfffe2300) +#define BCM_6348_DSL_BASE (0xfffe3000) +#define BCM_6348_ENET0_BASE (0xfffe6000) +#define BCM_6348_ENET1_BASE (0xfffe6800) +#define BCM_6348_ENETDMA_BASE (0xfffe7000) +#define BCM_6348_EHCI0_BASE (0xdeadbeef) +#define BCM_6348_SDRAM_BASE (0xfffe2300) +#define BCM_6348_MEMC_BASE (0xdeadbeef) +#define BCM_6348_DDR_BASE (0xdeadbeef) + +/* + * 6358 register sets base address + */ +#define BCM_6358_DSL_LMEM_BASE (0xfff00000) +#define BCM_6358_PERF_BASE (0xfffe0000) +#define BCM_6358_TIMER_BASE (0xfffe0040) +#define BCM_6358_WDT_BASE (0xfffe005c) +#define BCM_6358_UART0_BASE (0xfffe0100) +#define BCM_6358_GPIO_BASE (0xfffe0080) +#define BCM_6358_SPI_BASE (0xdeadbeef) +#define BCM_6358_UDC0_BASE (0xfffe0800) +#define BCM_6358_OHCI0_BASE (0xfffe1400) +#define BCM_6358_OHCI_PRIV_BASE (0xdeadbeef) +#define BCM_6358_USBH_PRIV_BASE (0xfffe1500) +#define BCM_6358_MPI_BASE (0xfffe1000) +#define BCM_6358_PCMCIA_BASE (0xfffe1054) +#define BCM_6358_SDRAM_REGS_BASE (0xfffe2300) +#define BCM_6358_DSL_BASE (0xfffe3000) +#define BCM_6358_ENET0_BASE (0xfffe4000) +#define BCM_6358_ENET1_BASE (0xfffe4800) +#define BCM_6358_ENETDMA_BASE (0xfffe5000) +#define BCM_6358_EHCI0_BASE (0xfffe1300) +#define BCM_6358_SDRAM_BASE (0xdeadbeef) +#define BCM_6358_MEMC_BASE (0xfffe1200) +#define BCM_6358_DDR_BASE (0xfffe12a0) + + +extern const unsigned long *bcm63xx_regs_base; + +static inline unsigned long bcm63xx_regset_address(enum bcm63xx_regs_set set) +{ +#ifdef BCMCPU_RUNTIME_DETECT + return bcm63xx_regs_base[set]; +#else +#ifdef CONFIG_BCM63XX_CPU_6338 + switch (set) { + case RSET_DSL_LMEM: + return BCM_6338_DSL_LMEM_BASE; + case RSET_PERF: + return BCM_6338_PERF_BASE; + case RSET_TIMER: + return BCM_6338_TIMER_BASE; + case RSET_WDT: + return BCM_6338_WDT_BASE; + case RSET_UART0: + return BCM_6338_UART0_BASE; + case RSET_GPIO: + return BCM_6338_GPIO_BASE; + case RSET_SPI: + return BCM_6338_SPI_BASE; + case RSET_UDC0: + return BCM_6338_UDC0_BASE; + case RSET_OHCI0: + return BCM_6338_OHCI0_BASE; + case RSET_OHCI_PRIV: + return BCM_6338_OHCI_PRIV_BASE; + case RSET_USBH_PRIV: + return BCM_6338_USBH_PRIV_BASE; + case RSET_MPI: + return BCM_6338_MPI_BASE; + case RSET_PCMCIA: + return BCM_6338_PCMCIA_BASE; + case RSET_DSL: + return BCM_6338_DSL_BASE; + case RSET_ENET0: + return BCM_6338_ENET0_BASE; + case RSET_ENET1: + return BCM_6338_ENET1_BASE; + case RSET_ENETDMA: + return BCM_6338_ENETDMA_BASE; + case RSET_EHCI0: + return BCM_6338_EHCI0_BASE; + case RSET_SDRAM: + return BCM_6338_SDRAM_BASE; + case RSET_MEMC: + return BCM_6338_MEMC_BASE; + case RSET_DDR: + return BCM_6338_DDR_BASE; + } +#endif +#ifdef CONFIG_BCM63XX_CPU_6345 + switch (set) { + case RSET_DSL_LMEM: + return BCM_6345_DSL_LMEM_BASE; + case RSET_PERF: + return BCM_6345_PERF_BASE; + case RSET_TIMER: + return BCM_6345_TIMER_BASE; + case RSET_WDT: + return BCM_6345_WDT_BASE; + case RSET_UART0: + return BCM_6345_UART0_BASE; + case RSET_GPIO: + return BCM_6345_GPIO_BASE; + case RSET_SPI: + return BCM_6345_SPI_BASE; + case RSET_UDC0: + return BCM_6345_UDC0_BASE; + case RSET_OHCI0: + return BCM_6345_OHCI0_BASE; + case RSET_OHCI_PRIV: + return BCM_6345_OHCI_PRIV_BASE; + case RSET_USBH_PRIV: + return BCM_6345_USBH_PRIV_BASE; + case RSET_MPI: + return BCM_6345_MPI_BASE; + case RSET_PCMCIA: + return BCM_6345_PCMCIA_BASE; + case RSET_DSL: + return BCM_6345_DSL_BASE; + case RSET_ENET0: + return BCM_6345_ENET0_BASE; + case RSET_ENET1: + return BCM_6345_ENET1_BASE; + case RSET_ENETDMA: + return BCM_6345_ENETDMA_BASE; + case RSET_EHCI0: + return BCM_6345_EHCI0_BASE; + case RSET_SDRAM: + return BCM_6345_SDRAM_BASE; + case RSET_MEMC: + return BCM_6345_MEMC_BASE; + case RSET_DDR: + return BCM_6345_DDR_BASE; + } +#endif +#ifdef CONFIG_BCM63XX_CPU_6348 + switch (set) { + case RSET_DSL_LMEM: + return BCM_6348_DSL_LMEM_BASE; + case RSET_PERF: + return BCM_6348_PERF_BASE; + case RSET_TIMER: + return BCM_6348_TIMER_BASE; + case RSET_WDT: + return BCM_6348_WDT_BASE; + case RSET_UART0: + return BCM_6348_UART0_BASE; + case RSET_GPIO: + return BCM_6348_GPIO_BASE; + case RSET_SPI: + return BCM_6348_SPI_BASE; + case RSET_UDC0: + return BCM_6348_UDC0_BASE; + case RSET_OHCI0: + return BCM_6348_OHCI0_BASE; + case RSET_OHCI_PRIV: + return BCM_6348_OHCI_PRIV_BASE; + case RSET_USBH_PRIV: + return BCM_6348_USBH_PRIV_BASE; + case RSET_MPI: + return BCM_6348_MPI_BASE; + case RSET_PCMCIA: + return BCM_6348_PCMCIA_BASE; + case RSET_DSL: + return BCM_6348_DSL_BASE; + case RSET_ENET0: + return BCM_6348_ENET0_BASE; + case RSET_ENET1: + return BCM_6348_ENET1_BASE; + case RSET_ENETDMA: + return BCM_6348_ENETDMA_BASE; + case RSET_EHCI0: + return BCM_6348_EHCI0_BASE; + case RSET_SDRAM: + return BCM_6348_SDRAM_BASE; + case RSET_MEMC: + return BCM_6348_MEMC_BASE; + case RSET_DDR: + return BCM_6348_DDR_BASE; + } +#endif +#ifdef CONFIG_BCM63XX_CPU_6358 + switch (set) { + case RSET_DSL_LMEM: + return BCM_6358_DSL_LMEM_BASE; + case RSET_PERF: + return BCM_6358_PERF_BASE; + case RSET_TIMER: + return BCM_6358_TIMER_BASE; + case RSET_WDT: + return BCM_6358_WDT_BASE; + case RSET_UART0: + return BCM_6358_UART0_BASE; + case RSET_GPIO: + return BCM_6358_GPIO_BASE; + case RSET_SPI: + return BCM_6358_SPI_BASE; + case RSET_UDC0: + return BCM_6358_UDC0_BASE; + case RSET_OHCI0: + return BCM_6358_OHCI0_BASE; + case RSET_OHCI_PRIV: + return BCM_6358_OHCI_PRIV_BASE; + case RSET_USBH_PRIV: + return BCM_6358_USBH_PRIV_BASE; + case RSET_MPI: + return BCM_6358_MPI_BASE; + case RSET_PCMCIA: + return BCM_6358_PCMCIA_BASE; + case RSET_ENET0: + return BCM_6358_ENET0_BASE; + case RSET_ENET1: + return BCM_6358_ENET1_BASE; + case RSET_ENETDMA: + return BCM_6358_ENETDMA_BASE; + case RSET_DSL: + return BCM_6358_DSL_BASE; + case RSET_EHCI0: + return BCM_6358_EHCI0_BASE; + case RSET_SDRAM: + return BCM_6358_SDRAM_BASE; + case RSET_MEMC: + return BCM_6358_MEMC_BASE; + case RSET_DDR: + return BCM_6358_DDR_BASE; + } +#endif +#endif + /* unreached */ + return 0; +} + +/* + * IRQ number changes across CPU too + */ +enum bcm63xx_irq { + IRQ_TIMER = 0, + IRQ_UART0, + IRQ_DSL, + IRQ_ENET0, + IRQ_ENET1, + IRQ_ENET_PHY, + IRQ_OHCI0, + IRQ_EHCI0, + IRQ_PCMCIA0, + IRQ_ENET0_RXDMA, + IRQ_ENET0_TXDMA, + IRQ_ENET1_RXDMA, + IRQ_ENET1_TXDMA, + IRQ_PCI, + IRQ_PCMCIA, +}; + +/* + * 6338 irqs + */ +#define BCM_6338_TIMER_IRQ (IRQ_INTERNAL_BASE + 0) +#define BCM_6338_SPI_IRQ (IRQ_INTERNAL_BASE + 1) +#define BCM_6338_UART0_IRQ (IRQ_INTERNAL_BASE + 2) +#define BCM_6338_DG_IRQ (IRQ_INTERNAL_BASE + 4) +#define BCM_6338_DSL_IRQ (IRQ_INTERNAL_BASE + 5) +#define BCM_6338_ATM_IRQ (IRQ_INTERNAL_BASE + 6) +#define BCM_6338_UDC0_IRQ (IRQ_INTERNAL_BASE + 7) +#define BCM_6338_ENET0_IRQ (IRQ_INTERNAL_BASE + 8) +#define BCM_6338_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 9) +#define BCM_6338_SDRAM_IRQ (IRQ_INTERNAL_BASE + 10) +#define BCM_6338_USB_CNTL_RX_DMA_IRQ (IRQ_INTERNAL_BASE + 11) +#define BCM_6338_USB_CNTL_TX_DMA_IRQ (IRQ_INTERNAL_BASE + 12) +#define BCM_6338_USB_BULK_RX_DMA_IRQ (IRQ_INTERNAL_BASE + 13) +#define BCM_6338_USB_BULK_TX_DMA_IRQ (IRQ_INTERNAL_BASE + 14) +#define BCM_6338_ENET0_RXDMA_IRQ (IRQ_INTERNAL_BASE + 15) +#define BCM_6338_ENET0_TXDMA_IRQ (IRQ_INTERNAL_BASE + 16) +#define BCM_6338_SDIO_IRQ (IRQ_INTERNAL_BASE + 17) + +/* + * 6345 irqs + */ +#define BCM_6345_TIMER_IRQ (IRQ_INTERNAL_BASE + 0) +#define BCM_6345_UART0_IRQ (IRQ_INTERNAL_BASE + 2) +#define BCM_6345_DSL_IRQ (IRQ_INTERNAL_BASE + 3) +#define BCM_6345_ATM_IRQ (IRQ_INTERNAL_BASE + 4) +#define BCM_6345_USB_IRQ (IRQ_INTERNAL_BASE + 5) +#define BCM_6345_ENET0_IRQ (IRQ_INTERNAL_BASE + 8) +#define BCM_6345_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 12) +#define BCM_6345_ENET0_RXDMA_IRQ (IRQ_INTERNAL_BASE + 13 + 1) +#define BCM_6345_ENET0_TXDMA_IRQ (IRQ_INTERNAL_BASE + 13 + 2) +#define BCM_6345_EBI_RX_IRQ (IRQ_INTERNAL_BASE + 13 + 5) +#define BCM_6345_EBI_TX_IRQ (IRQ_INTERNAL_BASE + 13 + 6) +#define BCM_6345_RESERVED_RX_IRQ (IRQ_INTERNAL_BASE + 13 + 9) +#define BCM_6345_RESERVED_TX_IRQ (IRQ_INTERNAL_BASE + 13 + 10) +#define BCM_6345_USB_BULK_RX_DMA_IRQ (IRQ_INTERNAL_BASE + 13 + 13) +#define BCM_6345_USB_BULK_TX_DMA_IRQ (IRQ_INTERNAL_BASE + 13 + 14) +#define BCM_6345_USB_CNTL_RX_DMA_IRQ (IRQ_INTERNAL_BASE + 13 + 15) +#define BCM_6345_USB_CNTL_TX_DMA_IRQ (IRQ_INTERNAL_BASE + 13 + 16) +#define BCM_6345_USB_ISO_RX_DMA_IRQ (IRQ_INTERNAL_BASE + 13 + 17) +#define BCM_6345_USB_ISO_TX_DMA_IRQ (IRQ_INTERNAL_BASE + 13 + 18) + +/* + * 6348 irqs + */ +#define BCM_6348_TIMER_IRQ (IRQ_INTERNAL_BASE + 0) +#define BCM_6348_UART0_IRQ (IRQ_INTERNAL_BASE + 2) +#define BCM_6348_DSL_IRQ (IRQ_INTERNAL_BASE + 4) +#define BCM_6348_ENET1_IRQ (IRQ_INTERNAL_BASE + 7) +#define BCM_6348_ENET0_IRQ (IRQ_INTERNAL_BASE + 8) +#define BCM_6348_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 9) +#define BCM_6348_OHCI0_IRQ (IRQ_INTERNAL_BASE + 12) +#define BCM_6348_ENET0_RXDMA_IRQ (IRQ_INTERNAL_BASE + 20) +#define BCM_6348_ENET0_TXDMA_IRQ (IRQ_INTERNAL_BASE + 21) +#define BCM_6348_ENET1_RXDMA_IRQ (IRQ_INTERNAL_BASE + 22) +#define BCM_6348_ENET1_TXDMA_IRQ (IRQ_INTERNAL_BASE + 23) +#define BCM_6348_PCMCIA_IRQ (IRQ_INTERNAL_BASE + 24) +#define BCM_6348_PCI_IRQ (IRQ_INTERNAL_BASE + 24) + +/* + * 6358 irqs + */ +#define BCM_6358_TIMER_IRQ (IRQ_INTERNAL_BASE + 0) +#define BCM_6358_UART0_IRQ (IRQ_INTERNAL_BASE + 2) +#define BCM_6358_OHCI0_IRQ (IRQ_INTERNAL_BASE + 5) +#define BCM_6358_ENET1_IRQ (IRQ_INTERNAL_BASE + 6) +#define BCM_6358_ENET0_IRQ (IRQ_INTERNAL_BASE + 8) +#define BCM_6358_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 9) +#define BCM_6358_EHCI0_IRQ (IRQ_INTERNAL_BASE + 10) +#define BCM_6358_ENET0_RXDMA_IRQ (IRQ_INTERNAL_BASE + 15) +#define BCM_6358_ENET0_TXDMA_IRQ (IRQ_INTERNAL_BASE + 16) +#define BCM_6358_ENET1_RXDMA_IRQ (IRQ_INTERNAL_BASE + 17) +#define BCM_6358_ENET1_TXDMA_IRQ (IRQ_INTERNAL_BASE + 18) +#define BCM_6358_DSL_IRQ (IRQ_INTERNAL_BASE + 29) +#define BCM_6358_PCI_IRQ (IRQ_INTERNAL_BASE + 31) +#define BCM_6358_PCMCIA_IRQ (IRQ_INTERNAL_BASE + 24) + +extern const int *bcm63xx_irqs; + +static inline int bcm63xx_get_irq_number(enum bcm63xx_irq irq) +{ + return bcm63xx_irqs[irq]; +} + +/* + * return installed memory size + */ +unsigned int bcm63xx_get_memory_size(void); + +#endif /* !BCM63XX_CPU_H_ */ diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cs.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cs.h new file mode 100644 index 00000000000..b1821c866e5 --- /dev/null +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cs.h @@ -0,0 +1,10 @@ +#ifndef BCM63XX_CS_H +#define BCM63XX_CS_H + +int bcm63xx_set_cs_base(unsigned int cs, u32 base, unsigned int size); +int bcm63xx_set_cs_timing(unsigned int cs, unsigned int wait, + unsigned int setup, unsigned int hold); +int bcm63xx_set_cs_param(unsigned int cs, u32 flags); +int bcm63xx_set_cs_status(unsigned int cs, int enable); + +#endif /* !BCM63XX_CS_H */ diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_dsp.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_dsp.h new file mode 100644 index 00000000000..b587d45c304 --- /dev/null +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_dsp.h @@ -0,0 +1,13 @@ +#ifndef __BCM63XX_DSP_H +#define __BCM63XX_DSP_H + +struct bcm63xx_dsp_platform_data { + unsigned gpio_rst; + unsigned gpio_int; + unsigned cs; + unsigned ext_irq; +}; + +int __init bcm63xx_dsp_register(const struct bcm63xx_dsp_platform_data *pd); + +#endif /* __BCM63XX_DSP_H */ diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h new file mode 100644 index 00000000000..d53f611184b --- /dev/null +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h @@ -0,0 +1,45 @@ +#ifndef BCM63XX_DEV_ENET_H_ +#define BCM63XX_DEV_ENET_H_ + +#include <linux/if_ether.h> +#include <linux/init.h> + +/* + * on board ethernet platform data + */ +struct bcm63xx_enet_platform_data { + char mac_addr[ETH_ALEN]; + + int has_phy; + + /* if has_phy, then set use_internal_phy */ + int use_internal_phy; + + /* or fill phy info to use an external one */ + int phy_id; + int has_phy_interrupt; + int phy_interrupt; + + /* if has_phy, use autonegociated pause parameters or force + * them */ + int pause_auto; + int pause_rx; + int pause_tx; + + /* if !has_phy, set desired forced speed/duplex */ + int force_speed_100; + int force_duplex_full; + + /* if !has_phy, set callback to perform mii device + * init/remove */ + int (*mii_config)(struct net_device *dev, int probe, + int (*mii_read)(struct net_device *dev, + int phy_id, int reg), + void (*mii_write)(struct net_device *dev, + int phy_id, int reg, int val)); +}; + +int __init bcm63xx_enet_register(int unit, + const struct bcm63xx_enet_platform_data *pd); + +#endif /* ! BCM63XX_DEV_ENET_H_ */ diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_pci.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_pci.h new file mode 100644 index 00000000000..c549344b70a --- /dev/null +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_pci.h @@ -0,0 +1,6 @@ +#ifndef BCM63XX_DEV_PCI_H_ +#define BCM63XX_DEV_PCI_H_ + +extern int bcm63xx_pci_enabled; + +#endif /* BCM63XX_DEV_PCI_H_ */ diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h new file mode 100644 index 00000000000..76a0b7216af --- /dev/null +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h @@ -0,0 +1,22 @@ +#ifndef BCM63XX_GPIO_H +#define BCM63XX_GPIO_H + +#include <linux/init.h> + +int __init bcm63xx_gpio_init(void); + +static inline unsigned long bcm63xx_gpio_count(void) +{ + switch (bcm63xx_get_cpu_id()) { + case BCM6358_CPU_ID: + return 40; + case BCM6348_CPU_ID: + default: + return 37; + } +} + +#define GPIO_DIR_OUT 0x0 +#define GPIO_DIR_IN 0x1 + +#endif /* !BCM63XX_GPIO_H */ diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h new file mode 100644 index 00000000000..91180fac6ed --- /dev/null +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h @@ -0,0 +1,93 @@ +#ifndef BCM63XX_IO_H_ +#define BCM63XX_IO_H_ + +#include "bcm63xx_cpu.h" + +/* + * Physical memory map, RAM is mapped at 0x0. + * + * Note that size MUST be a power of two. + */ +#define BCM_PCMCIA_COMMON_BASE_PA (0x20000000) +#define BCM_PCMCIA_COMMON_SIZE (16 * 1024 * 1024) +#define BCM_PCMCIA_COMMON_END_PA (BCM_PCMCIA_COMMON_BASE_PA + \ + BCM_PCMCIA_COMMON_SIZE - 1) + +#define BCM_PCMCIA_ATTR_BASE_PA (0x21000000) +#define BCM_PCMCIA_ATTR_SIZE (16 * 1024 * 1024) +#define BCM_PCMCIA_ATTR_END_PA (BCM_PCMCIA_ATTR_BASE_PA + \ + BCM_PCMCIA_ATTR_SIZE - 1) + +#define BCM_PCMCIA_IO_BASE_PA (0x22000000) +#define BCM_PCMCIA_IO_SIZE (64 * 1024) +#define BCM_PCMCIA_IO_END_PA (BCM_PCMCIA_IO_BASE_PA + \ + BCM_PCMCIA_IO_SIZE - 1) + +#define BCM_PCI_MEM_BASE_PA (0x30000000) +#define BCM_PCI_MEM_SIZE (128 * 1024 * 1024) +#define BCM_PCI_MEM_END_PA (BCM_PCI_MEM_BASE_PA + \ + BCM_PCI_MEM_SIZE - 1) + +#define BCM_PCI_IO_BASE_PA (0x08000000) +#define BCM_PCI_IO_SIZE (64 * 1024) +#define BCM_PCI_IO_END_PA (BCM_PCI_IO_BASE_PA + \ + BCM_PCI_IO_SIZE - 1) +#define BCM_PCI_IO_HALF_PA (BCM_PCI_IO_BASE_PA + \ + (BCM_PCI_IO_SIZE / 2) - 1) + +#define BCM_CB_MEM_BASE_PA (0x38000000) +#define BCM_CB_MEM_SIZE (128 * 1024 * 1024) +#define BCM_CB_MEM_END_PA (BCM_CB_MEM_BASE_PA + \ + BCM_CB_MEM_SIZE - 1) + + +/* + * Internal registers are accessed through KSEG3 + */ +#define BCM_REGS_VA(x) ((void __iomem *)(x)) + +#define bcm_readb(a) (*(volatile unsigned char *) BCM_REGS_VA(a)) +#define bcm_readw(a) (*(volatile unsigned short *) BCM_REGS_VA(a)) +#define bcm_readl(a) (*(volatile unsigned int *) BCM_REGS_VA(a)) +#define bcm_writeb(v, a) (*(volatile unsigned char *) BCM_REGS_VA((a)) = (v)) +#define bcm_writew(v, a) (*(volatile unsigned short *) BCM_REGS_VA((a)) = (v)) +#define bcm_writel(v, a) (*(volatile unsigned int *) BCM_REGS_VA((a)) = (v)) + +/* + * IO helpers to access register set for current CPU + */ +#define bcm_rset_readb(s, o) bcm_readb(bcm63xx_regset_address(s) + (o)) +#define bcm_rset_readw(s, o) bcm_readw(bcm63xx_regset_address(s) + (o)) +#define bcm_rset_readl(s, o) bcm_readl(bcm63xx_regset_address(s) + (o)) +#define bcm_rset_writeb(s, v, o) bcm_writeb((v), \ + bcm63xx_regset_address(s) + (o)) +#define bcm_rset_writew(s, v, o) bcm_writew((v), \ + bcm63xx_regset_address(s) + (o)) +#define bcm_rset_writel(s, v, o) bcm_writel((v), \ + bcm63xx_regset_address(s) + (o)) + +/* + * helpers for frequently used register sets + */ +#define bcm_perf_readl(o) bcm_rset_readl(RSET_PERF, (o)) +#define bcm_perf_writel(v, o) bcm_rset_writel(RSET_PERF, (v), (o)) +#define bcm_timer_readl(o) bcm_rset_readl(RSET_TIMER, (o)) +#define bcm_timer_writel(v, o) bcm_rset_writel(RSET_TIMER, (v), (o)) +#define bcm_wdt_readl(o) bcm_rset_readl(RSET_WDT, (o)) +#define bcm_wdt_writel(v, o) bcm_rset_writel(RSET_WDT, (v), (o)) +#define bcm_gpio_readl(o) bcm_rset_readl(RSET_GPIO, (o)) +#define bcm_gpio_writel(v, o) bcm_rset_writel(RSET_GPIO, (v), (o)) +#define bcm_uart0_readl(o) bcm_rset_readl(RSET_UART0, (o)) +#define bcm_uart0_writel(v, o) bcm_rset_writel(RSET_UART0, (v), (o)) +#define bcm_mpi_readl(o) bcm_rset_readl(RSET_MPI, (o)) +#define bcm_mpi_writel(v, o) bcm_rset_writel(RSET_MPI, (v), (o)) +#define bcm_pcmcia_readl(o) bcm_rset_readl(RSET_PCMCIA, (o)) +#define bcm_pcmcia_writel(v, o) bcm_rset_writel(RSET_PCMCIA, (v), (o)) +#define bcm_sdram_readl(o) bcm_rset_readl(RSET_SDRAM, (o)) +#define bcm_sdram_writel(v, o) bcm_rset_writel(RSET_SDRAM, (v), (o)) +#define bcm_memc_readl(o) bcm_rset_readl(RSET_MEMC, (o)) +#define bcm_memc_writel(v, o) bcm_rset_writel(RSET_MEMC, (v), (o)) +#define bcm_ddr_readl(o) bcm_rset_readl(RSET_DDR, (o)) +#define bcm_ddr_writel(v, o) bcm_rset_writel(RSET_DDR, (v), (o)) + +#endif /* ! BCM63XX_IO_H_ */ diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h new file mode 100644 index 00000000000..5f95577c821 --- /dev/null +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h @@ -0,0 +1,15 @@ +#ifndef BCM63XX_IRQ_H_ +#define BCM63XX_IRQ_H_ + +#include <bcm63xx_cpu.h> + +#define IRQ_MIPS_BASE 0 +#define IRQ_INTERNAL_BASE 8 + +#define IRQ_EXT_BASE (IRQ_MIPS_BASE + 3) +#define IRQ_EXT_0 (IRQ_EXT_BASE + 0) +#define IRQ_EXT_1 (IRQ_EXT_BASE + 1) +#define IRQ_EXT_2 (IRQ_EXT_BASE + 2) +#define IRQ_EXT_3 (IRQ_EXT_BASE + 3) + +#endif /* ! BCM63XX_IRQ_H_ */ diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h new file mode 100644 index 00000000000..ed4ccec87dd --- /dev/null +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h @@ -0,0 +1,773 @@ +#ifndef BCM63XX_REGS_H_ +#define BCM63XX_REGS_H_ + +/************************************************************************* + * _REG relative to RSET_PERF + *************************************************************************/ + +/* Chip Identifier / Revision register */ +#define PERF_REV_REG 0x0 +#define REV_CHIPID_SHIFT 16 +#define REV_CHIPID_MASK (0xffff << REV_CHIPID_SHIFT) +#define REV_REVID_SHIFT 0 +#define REV_REVID_MASK (0xffff << REV_REVID_SHIFT) + +/* Clock Control register */ +#define PERF_CKCTL_REG 0x4 + +#define CKCTL_6338_ADSLPHY_EN (1 << 0) +#define CKCTL_6338_MPI_EN (1 << 1) +#define CKCTL_6338_DRAM_EN (1 << 2) +#define CKCTL_6338_ENET_EN (1 << 4) +#define CKCTL_6338_USBS_EN (1 << 4) +#define CKCTL_6338_SAR_EN (1 << 5) +#define CKCTL_6338_SPI_EN (1 << 9) + +#define CKCTL_6338_ALL_SAFE_EN (CKCTL_6338_ADSLPHY_EN | \ + CKCTL_6338_MPI_EN | \ + CKCTL_6338_ENET_EN | \ + CKCTL_6338_SAR_EN | \ + CKCTL_6338_SPI_EN) + +#define CKCTL_6345_CPU_EN (1 << 0) +#define CKCTL_6345_BUS_EN (1 << 1) +#define CKCTL_6345_EBI_EN (1 << 2) +#define CKCTL_6345_UART_EN (1 << 3) +#define CKCTL_6345_ADSLPHY_EN (1 << 4) +#define CKCTL_6345_ENET_EN (1 << 7) +#define CKCTL_6345_USBH_EN (1 << 8) + +#define CKCTL_6345_ALL_SAFE_EN (CKCTL_6345_ENET_EN | \ + CKCTL_6345_USBH_EN | \ + CKCTL_6345_ADSLPHY_EN) + +#define CKCTL_6348_ADSLPHY_EN (1 << 0) +#define CKCTL_6348_MPI_EN (1 << 1) +#define CKCTL_6348_SDRAM_EN (1 << 2) +#define CKCTL_6348_M2M_EN (1 << 3) +#define CKCTL_6348_ENET_EN (1 << 4) +#define CKCTL_6348_SAR_EN (1 << 5) +#define CKCTL_6348_USBS_EN (1 << 6) +#define CKCTL_6348_USBH_EN (1 << 8) +#define CKCTL_6348_SPI_EN (1 << 9) + +#define CKCTL_6348_ALL_SAFE_EN (CKCTL_6348_ADSLPHY_EN | \ + CKCTL_6348_M2M_EN | \ + CKCTL_6348_ENET_EN | \ + CKCTL_6348_SAR_EN | \ + CKCTL_6348_USBS_EN | \ + CKCTL_6348_USBH_EN | \ + CKCTL_6348_SPI_EN) + +#define CKCTL_6358_ENET_EN (1 << 4) +#define CKCTL_6358_ADSLPHY_EN (1 << 5) +#define CKCTL_6358_PCM_EN (1 << 8) +#define CKCTL_6358_SPI_EN (1 << 9) +#define CKCTL_6358_USBS_EN (1 << 10) +#define CKCTL_6358_SAR_EN (1 << 11) +#define CKCTL_6358_EMUSB_EN (1 << 17) +#define CKCTL_6358_ENET0_EN (1 << 18) +#define CKCTL_6358_ENET1_EN (1 << 19) +#define CKCTL_6358_USBSU_EN (1 << 20) +#define CKCTL_6358_EPHY_EN (1 << 21) + +#define CKCTL_6358_ALL_SAFE_EN (CKCTL_6358_ENET_EN | \ + CKCTL_6358_ADSLPHY_EN | \ + CKCTL_6358_PCM_EN | \ + CKCTL_6358_SPI_EN | \ + CKCTL_6358_USBS_EN | \ + CKCTL_6358_SAR_EN | \ + CKCTL_6358_EMUSB_EN | \ + CKCTL_6358_ENET0_EN | \ + CKCTL_6358_ENET1_EN | \ + CKCTL_6358_USBSU_EN | \ + CKCTL_6358_EPHY_EN) + +/* System PLL Control register */ +#define PERF_SYS_PLL_CTL_REG 0x8 +#define SYS_PLL_SOFT_RESET 0x1 + +/* Interrupt Mask register */ +#define PERF_IRQMASK_REG 0xc +#define PERF_IRQSTAT_REG 0x10 + +/* Interrupt Status register */ +#define PERF_IRQSTAT_REG 0x10 + +/* External Interrupt Configuration register */ +#define PERF_EXTIRQ_CFG_REG 0x14 +#define EXTIRQ_CFG_SENSE(x) (1 << (x)) +#define EXTIRQ_CFG_STAT(x) (1 << (x + 5)) +#define EXTIRQ_CFG_CLEAR(x) (1 << (x + 10)) +#define EXTIRQ_CFG_MASK(x) (1 << (x + 15)) +#define EXTIRQ_CFG_BOTHEDGE(x) (1 << (x + 20)) +#define EXTIRQ_CFG_LEVELSENSE(x) (1 << (x + 25)) + +#define EXTIRQ_CFG_CLEAR_ALL (0xf << 10) +#define EXTIRQ_CFG_MASK_ALL (0xf << 15) + +/* Soft Reset register */ +#define PERF_SOFTRESET_REG 0x28 + +#define SOFTRESET_6338_SPI_MASK (1 << 0) +#define SOFTRESET_6338_ENET_MASK (1 << 2) +#define SOFTRESET_6338_USBH_MASK (1 << 3) +#define SOFTRESET_6338_USBS_MASK (1 << 4) +#define SOFTRESET_6338_ADSL_MASK (1 << 5) +#define SOFTRESET_6338_DMAMEM_MASK (1 << 6) +#define SOFTRESET_6338_SAR_MASK (1 << 7) +#define SOFTRESET_6338_ACLC_MASK (1 << 8) +#define SOFTRESET_6338_ADSLMIPSPLL_MASK (1 << 10) +#define SOFTRESET_6338_ALL (SOFTRESET_6338_SPI_MASK | \ + SOFTRESET_6338_ENET_MASK | \ + SOFTRESET_6338_USBH_MASK | \ + SOFTRESET_6338_USBS_MASK | \ + SOFTRESET_6338_ADSL_MASK | \ + SOFTRESET_6338_DMAMEM_MASK | \ + SOFTRESET_6338_SAR_MASK | \ + SOFTRESET_6338_ACLC_MASK | \ + SOFTRESET_6338_ADSLMIPSPLL_MASK) + +#define SOFTRESET_6348_SPI_MASK (1 << 0) +#define SOFTRESET_6348_ENET_MASK (1 << 2) +#define SOFTRESET_6348_USBH_MASK (1 << 3) +#define SOFTRESET_6348_USBS_MASK (1 << 4) +#define SOFTRESET_6348_ADSL_MASK (1 << 5) +#define SOFTRESET_6348_DMAMEM_MASK (1 << 6) +#define SOFTRESET_6348_SAR_MASK (1 << 7) +#define SOFTRESET_6348_ACLC_MASK (1 << 8) +#define SOFTRESET_6348_ADSLMIPSPLL_MASK (1 << 10) + +#define SOFTRESET_6348_ALL (SOFTRESET_6348_SPI_MASK | \ + SOFTRESET_6348_ENET_MASK | \ + SOFTRESET_6348_USBH_MASK | \ + SOFTRESET_6348_USBS_MASK | \ + SOFTRESET_6348_ADSL_MASK | \ + SOFTRESET_6348_DMAMEM_MASK | \ + SOFTRESET_6348_SAR_MASK | \ + SOFTRESET_6348_ACLC_MASK | \ + SOFTRESET_6348_ADSLMIPSPLL_MASK) + +/* MIPS PLL control register */ +#define PERF_MIPSPLLCTL_REG 0x34 +#define MIPSPLLCTL_N1_SHIFT 20 +#define MIPSPLLCTL_N1_MASK (0x7 << MIPSPLLCTL_N1_SHIFT) +#define MIPSPLLCTL_N2_SHIFT 15 +#define MIPSPLLCTL_N2_MASK (0x1f << MIPSPLLCTL_N2_SHIFT) +#define MIPSPLLCTL_M1REF_SHIFT 12 +#define MIPSPLLCTL_M1REF_MASK (0x7 << MIPSPLLCTL_M1REF_SHIFT) +#define MIPSPLLCTL_M2REF_SHIFT 9 +#define MIPSPLLCTL_M2REF_MASK (0x7 << MIPSPLLCTL_M2REF_SHIFT) +#define MIPSPLLCTL_M1CPU_SHIFT 6 +#define MIPSPLLCTL_M1CPU_MASK (0x7 << MIPSPLLCTL_M1CPU_SHIFT) +#define MIPSPLLCTL_M1BUS_SHIFT 3 +#define MIPSPLLCTL_M1BUS_MASK (0x7 << MIPSPLLCTL_M1BUS_SHIFT) +#define MIPSPLLCTL_M2BUS_SHIFT 0 +#define MIPSPLLCTL_M2BUS_MASK (0x7 << MIPSPLLCTL_M2BUS_SHIFT) + +/* ADSL PHY PLL Control register */ +#define PERF_ADSLPLLCTL_REG 0x38 +#define ADSLPLLCTL_N1_SHIFT 20 +#define ADSLPLLCTL_N1_MASK (0x7 << ADSLPLLCTL_N1_SHIFT) +#define ADSLPLLCTL_N2_SHIFT 15 +#define ADSLPLLCTL_N2_MASK (0x1f << ADSLPLLCTL_N2_SHIFT) +#define ADSLPLLCTL_M1REF_SHIFT 12 +#define ADSLPLLCTL_M1REF_MASK (0x7 << ADSLPLLCTL_M1REF_SHIFT) +#define ADSLPLLCTL_M2REF_SHIFT 9 +#define ADSLPLLCTL_M2REF_MASK (0x7 << ADSLPLLCTL_M2REF_SHIFT) +#define ADSLPLLCTL_M1CPU_SHIFT 6 +#define ADSLPLLCTL_M1CPU_MASK (0x7 << ADSLPLLCTL_M1CPU_SHIFT) +#define ADSLPLLCTL_M1BUS_SHIFT 3 +#define ADSLPLLCTL_M1BUS_MASK (0x7 << ADSLPLLCTL_M1BUS_SHIFT) +#define ADSLPLLCTL_M2BUS_SHIFT 0 +#define ADSLPLLCTL_M2BUS_MASK (0x7 << ADSLPLLCTL_M2BUS_SHIFT) + +#define ADSLPLLCTL_VAL(n1, n2, m1ref, m2ref, m1cpu, m1bus, m2bus) \ + (((n1) << ADSLPLLCTL_N1_SHIFT) | \ + ((n2) << ADSLPLLCTL_N2_SHIFT) | \ + ((m1ref) << ADSLPLLCTL_M1REF_SHIFT) | \ + ((m2ref) << ADSLPLLCTL_M2REF_SHIFT) | \ + ((m1cpu) << ADSLPLLCTL_M1CPU_SHIFT) | \ + ((m1bus) << ADSLPLLCTL_M1BUS_SHIFT) | \ + ((m2bus) << ADSLPLLCTL_M2BUS_SHIFT)) + + +/************************************************************************* + * _REG relative to RSET_TIMER + *************************************************************************/ + +#define BCM63XX_TIMER_COUNT 4 +#define TIMER_T0_ID 0 +#define TIMER_T1_ID 1 +#define TIMER_T2_ID 2 +#define TIMER_WDT_ID 3 + +/* Timer irqstat register */ +#define TIMER_IRQSTAT_REG 0 +#define TIMER_IRQSTAT_TIMER_CAUSE(x) (1 << (x)) +#define TIMER_IRQSTAT_TIMER0_CAUSE (1 << 0) +#define TIMER_IRQSTAT_TIMER1_CAUSE (1 << 1) +#define TIMER_IRQSTAT_TIMER2_CAUSE (1 << 2) +#define TIMER_IRQSTAT_WDT_CAUSE (1 << 3) +#define TIMER_IRQSTAT_TIMER_IR_EN(x) (1 << ((x) + 8)) +#define TIMER_IRQSTAT_TIMER0_IR_EN (1 << 8) +#define TIMER_IRQSTAT_TIMER1_IR_EN (1 << 9) +#define TIMER_IRQSTAT_TIMER2_IR_EN (1 << 10) + +/* Timer control register */ +#define TIMER_CTLx_REG(x) (0x4 + (x * 4)) +#define TIMER_CTL0_REG 0x4 +#define TIMER_CTL1_REG 0x8 +#define TIMER_CTL2_REG 0xC +#define TIMER_CTL_COUNTDOWN_MASK (0x3fffffff) +#define TIMER_CTL_MONOTONIC_MASK (1 << 30) +#define TIMER_CTL_ENABLE_MASK (1 << 31) + + +/************************************************************************* + * _REG relative to RSET_WDT + *************************************************************************/ + +/* Watchdog default count register */ +#define WDT_DEFVAL_REG 0x0 + +/* Watchdog control register */ +#define WDT_CTL_REG 0x4 + +/* Watchdog control register constants */ +#define WDT_START_1 (0xff00) +#define WDT_START_2 (0x00ff) +#define WDT_STOP_1 (0xee00) +#define WDT_STOP_2 (0x00ee) + +/* Watchdog reset length register */ +#define WDT_RSTLEN_REG 0x8 + + +/************************************************************************* + * _REG relative to RSET_UARTx + *************************************************************************/ + +/* UART Control Register */ +#define UART_CTL_REG 0x0 +#define UART_CTL_RXTMOUTCNT_SHIFT 0 +#define UART_CTL_RXTMOUTCNT_MASK (0x1f << UART_CTL_RXTMOUTCNT_SHIFT) +#define UART_CTL_RSTTXDN_SHIFT 5 +#define UART_CTL_RSTTXDN_MASK (1 << UART_CTL_RSTTXDN_SHIFT) +#define UART_CTL_RSTRXFIFO_SHIFT 6 +#define UART_CTL_RSTRXFIFO_MASK (1 << UART_CTL_RSTRXFIFO_SHIFT) +#define UART_CTL_RSTTXFIFO_SHIFT 7 +#define UART_CTL_RSTTXFIFO_MASK (1 << UART_CTL_RSTTXFIFO_SHIFT) +#define UART_CTL_STOPBITS_SHIFT 8 +#define UART_CTL_STOPBITS_MASK (0xf << UART_CTL_STOPBITS_SHIFT) +#define UART_CTL_STOPBITS_1 (0x7 << UART_CTL_STOPBITS_SHIFT) +#define UART_CTL_STOPBITS_2 (0xf << UART_CTL_STOPBITS_SHIFT) +#define UART_CTL_BITSPERSYM_SHIFT 12 +#define UART_CTL_BITSPERSYM_MASK (0x3 << UART_CTL_BITSPERSYM_SHIFT) +#define UART_CTL_XMITBRK_SHIFT 14 +#define UART_CTL_XMITBRK_MASK (1 << UART_CTL_XMITBRK_SHIFT) +#define UART_CTL_RSVD_SHIFT 15 +#define UART_CTL_RSVD_MASK (1 << UART_CTL_RSVD_SHIFT) +#define UART_CTL_RXPAREVEN_SHIFT 16 +#define UART_CTL_RXPAREVEN_MASK (1 << UART_CTL_RXPAREVEN_SHIFT) +#define UART_CTL_RXPAREN_SHIFT 17 +#define UART_CTL_RXPAREN_MASK (1 << UART_CTL_RXPAREN_SHIFT) +#define UART_CTL_TXPAREVEN_SHIFT 18 +#define UART_CTL_TXPAREVEN_MASK (1 << UART_CTL_TXPAREVEN_SHIFT) +#define UART_CTL_TXPAREN_SHIFT 18 +#define UART_CTL_TXPAREN_MASK (1 << UART_CTL_TXPAREN_SHIFT) +#define UART_CTL_LOOPBACK_SHIFT 20 +#define UART_CTL_LOOPBACK_MASK (1 << UART_CTL_LOOPBACK_SHIFT) +#define UART_CTL_RXEN_SHIFT 21 +#define UART_CTL_RXEN_MASK (1 << UART_CTL_RXEN_SHIFT) +#define UART_CTL_TXEN_SHIFT 22 +#define UART_CTL_TXEN_MASK (1 << UART_CTL_TXEN_SHIFT) +#define UART_CTL_BRGEN_SHIFT 23 +#define UART_CTL_BRGEN_MASK (1 << UART_CTL_BRGEN_SHIFT) + +/* UART Baudword register */ +#define UART_BAUD_REG 0x4 + +/* UART Misc Control register */ +#define UART_MCTL_REG 0x8 +#define UART_MCTL_DTR_SHIFT 0 +#define UART_MCTL_DTR_MASK (1 << UART_MCTL_DTR_SHIFT) +#define UART_MCTL_RTS_SHIFT 1 +#define UART_MCTL_RTS_MASK (1 << UART_MCTL_RTS_SHIFT) +#define UART_MCTL_RXFIFOTHRESH_SHIFT 8 +#define UART_MCTL_RXFIFOTHRESH_MASK (0xf << UART_MCTL_RXFIFOTHRESH_SHIFT) +#define UART_MCTL_TXFIFOTHRESH_SHIFT 12 +#define UART_MCTL_TXFIFOTHRESH_MASK (0xf << UART_MCTL_TXFIFOTHRESH_SHIFT) +#define UART_MCTL_RXFIFOFILL_SHIFT 16 +#define UART_MCTL_RXFIFOFILL_MASK (0x1f << UART_MCTL_RXFIFOFILL_SHIFT) +#define UART_MCTL_TXFIFOFILL_SHIFT 24 +#define UART_MCTL_TXFIFOFILL_MASK (0x1f << UART_MCTL_TXFIFOFILL_SHIFT) + +/* UART External Input Configuration register */ +#define UART_EXTINP_REG 0xc +#define UART_EXTINP_RI_SHIFT 0 +#define UART_EXTINP_RI_MASK (1 << UART_EXTINP_RI_SHIFT) +#define UART_EXTINP_CTS_SHIFT 1 +#define UART_EXTINP_CTS_MASK (1 << UART_EXTINP_CTS_SHIFT) +#define UART_EXTINP_DCD_SHIFT 2 +#define UART_EXTINP_DCD_MASK (1 << UART_EXTINP_DCD_SHIFT) +#define UART_EXTINP_DSR_SHIFT 3 +#define UART_EXTINP_DSR_MASK (1 << UART_EXTINP_DSR_SHIFT) +#define UART_EXTINP_IRSTAT(x) (1 << (x + 4)) +#define UART_EXTINP_IRMASK(x) (1 << (x + 8)) +#define UART_EXTINP_IR_RI 0 +#define UART_EXTINP_IR_CTS 1 +#define UART_EXTINP_IR_DCD 2 +#define UART_EXTINP_IR_DSR 3 +#define UART_EXTINP_RI_NOSENSE_SHIFT 16 +#define UART_EXTINP_RI_NOSENSE_MASK (1 << UART_EXTINP_RI_NOSENSE_SHIFT) +#define UART_EXTINP_CTS_NOSENSE_SHIFT 17 +#define UART_EXTINP_CTS_NOSENSE_MASK (1 << UART_EXTINP_CTS_NOSENSE_SHIFT) +#define UART_EXTINP_DCD_NOSENSE_SHIFT 18 +#define UART_EXTINP_DCD_NOSENSE_MASK (1 << UART_EXTINP_DCD_NOSENSE_SHIFT) +#define UART_EXTINP_DSR_NOSENSE_SHIFT 19 +#define UART_EXTINP_DSR_NOSENSE_MASK (1 << UART_EXTINP_DSR_NOSENSE_SHIFT) + +/* UART Interrupt register */ +#define UART_IR_REG 0x10 +#define UART_IR_MASK(x) (1 << (x + 16)) +#define UART_IR_STAT(x) (1 << (x)) +#define UART_IR_EXTIP 0 +#define UART_IR_TXUNDER 1 +#define UART_IR_TXOVER 2 +#define UART_IR_TXTRESH 3 +#define UART_IR_TXRDLATCH 4 +#define UART_IR_TXEMPTY 5 +#define UART_IR_RXUNDER 6 +#define UART_IR_RXOVER 7 +#define UART_IR_RXTIMEOUT 8 +#define UART_IR_RXFULL 9 +#define UART_IR_RXTHRESH 10 +#define UART_IR_RXNOTEMPTY 11 +#define UART_IR_RXFRAMEERR 12 +#define UART_IR_RXPARERR 13 +#define UART_IR_RXBRK 14 +#define UART_IR_TXDONE 15 + +/* UART Fifo register */ +#define UART_FIFO_REG 0x14 +#define UART_FIFO_VALID_SHIFT 0 +#define UART_FIFO_VALID_MASK 0xff +#define UART_FIFO_FRAMEERR_SHIFT 8 +#define UART_FIFO_FRAMEERR_MASK (1 << UART_FIFO_FRAMEERR_SHIFT) +#define UART_FIFO_PARERR_SHIFT 9 +#define UART_FIFO_PARERR_MASK (1 << UART_FIFO_PARERR_SHIFT) +#define UART_FIFO_BRKDET_SHIFT 10 +#define UART_FIFO_BRKDET_MASK (1 << UART_FIFO_BRKDET_SHIFT) +#define UART_FIFO_ANYERR_MASK (UART_FIFO_FRAMEERR_MASK | \ + UART_FIFO_PARERR_MASK | \ + UART_FIFO_BRKDET_MASK) + + +/************************************************************************* + * _REG relative to RSET_GPIO + *************************************************************************/ + +/* GPIO registers */ +#define GPIO_CTL_HI_REG 0x0 +#define GPIO_CTL_LO_REG 0x4 +#define GPIO_DATA_HI_REG 0x8 +#define GPIO_DATA_LO_REG 0xC + +/* GPIO mux registers and constants */ +#define GPIO_MODE_REG 0x18 + +#define GPIO_MODE_6348_G4_DIAG 0x00090000 +#define GPIO_MODE_6348_G4_UTOPIA 0x00080000 +#define GPIO_MODE_6348_G4_LEGACY_LED 0x00030000 +#define GPIO_MODE_6348_G4_MII_SNOOP 0x00020000 +#define GPIO_MODE_6348_G4_EXT_EPHY 0x00010000 +#define GPIO_MODE_6348_G3_DIAG 0x00009000 +#define GPIO_MODE_6348_G3_UTOPIA 0x00008000 +#define GPIO_MODE_6348_G3_EXT_MII 0x00007000 +#define GPIO_MODE_6348_G2_DIAG 0x00000900 +#define GPIO_MODE_6348_G2_PCI 0x00000500 +#define GPIO_MODE_6348_G1_DIAG 0x00000090 +#define GPIO_MODE_6348_G1_UTOPIA 0x00000080 +#define GPIO_MODE_6348_G1_SPI_UART 0x00000060 +#define GPIO_MODE_6348_G1_SPI_MASTER 0x00000060 +#define GPIO_MODE_6348_G1_MII_PCCARD 0x00000040 +#define GPIO_MODE_6348_G1_MII_SNOOP 0x00000020 +#define GPIO_MODE_6348_G1_EXT_EPHY 0x00000010 +#define GPIO_MODE_6348_G0_DIAG 0x00000009 +#define GPIO_MODE_6348_G0_EXT_MII 0x00000007 + +#define GPIO_MODE_6358_EXTRACS (1 << 5) +#define GPIO_MODE_6358_UART1 (1 << 6) +#define GPIO_MODE_6358_EXTRA_SPI_SS (1 << 7) +#define GPIO_MODE_6358_SERIAL_LED (1 << 10) +#define GPIO_MODE_6358_UTOPIA (1 << 12) + + +/************************************************************************* + * _REG relative to RSET_ENET + *************************************************************************/ + +/* Receiver Configuration register */ +#define ENET_RXCFG_REG 0x0 +#define ENET_RXCFG_ALLMCAST_SHIFT 1 +#define ENET_RXCFG_ALLMCAST_MASK (1 << ENET_RXCFG_ALLMCAST_SHIFT) +#define ENET_RXCFG_PROMISC_SHIFT 3 +#define ENET_RXCFG_PROMISC_MASK (1 << ENET_RXCFG_PROMISC_SHIFT) +#define ENET_RXCFG_LOOPBACK_SHIFT 4 +#define ENET_RXCFG_LOOPBACK_MASK (1 << ENET_RXCFG_LOOPBACK_SHIFT) +#define ENET_RXCFG_ENFLOW_SHIFT 5 +#define ENET_RXCFG_ENFLOW_MASK (1 << ENET_RXCFG_ENFLOW_SHIFT) + +/* Receive Maximum Length register */ +#define ENET_RXMAXLEN_REG 0x4 +#define ENET_RXMAXLEN_SHIFT 0 +#define ENET_RXMAXLEN_MASK (0x7ff << ENET_RXMAXLEN_SHIFT) + +/* Transmit Maximum Length register */ +#define ENET_TXMAXLEN_REG 0x8 +#define ENET_TXMAXLEN_SHIFT 0 +#define ENET_TXMAXLEN_MASK (0x7ff << ENET_TXMAXLEN_SHIFT) + +/* MII Status/Control register */ +#define ENET_MIISC_REG 0x10 +#define ENET_MIISC_MDCFREQDIV_SHIFT 0 +#define ENET_MIISC_MDCFREQDIV_MASK (0x7f << ENET_MIISC_MDCFREQDIV_SHIFT) +#define ENET_MIISC_PREAMBLEEN_SHIFT 7 +#define ENET_MIISC_PREAMBLEEN_MASK (1 << ENET_MIISC_PREAMBLEEN_SHIFT) + +/* MII Data register */ +#define ENET_MIIDATA_REG 0x14 +#define ENET_MIIDATA_DATA_SHIFT 0 +#define ENET_MIIDATA_DATA_MASK (0xffff << ENET_MIIDATA_DATA_SHIFT) +#define ENET_MIIDATA_TA_SHIFT 16 +#define ENET_MIIDATA_TA_MASK (0x3 << ENET_MIIDATA_TA_SHIFT) +#define ENET_MIIDATA_REG_SHIFT 18 +#define ENET_MIIDATA_REG_MASK (0x1f << ENET_MIIDATA_REG_SHIFT) +#define ENET_MIIDATA_PHYID_SHIFT 23 +#define ENET_MIIDATA_PHYID_MASK (0x1f << ENET_MIIDATA_PHYID_SHIFT) +#define ENET_MIIDATA_OP_READ_MASK (0x6 << 28) +#define ENET_MIIDATA_OP_WRITE_MASK (0x5 << 28) + +/* Ethernet Interrupt Mask register */ +#define ENET_IRMASK_REG 0x18 + +/* Ethernet Interrupt register */ +#define ENET_IR_REG 0x1c +#define ENET_IR_MII (1 << 0) +#define ENET_IR_MIB (1 << 1) +#define ENET_IR_FLOWC (1 << 2) + +/* Ethernet Control register */ +#define ENET_CTL_REG 0x2c +#define ENET_CTL_ENABLE_SHIFT 0 +#define ENET_CTL_ENABLE_MASK (1 << ENET_CTL_ENABLE_SHIFT) +#define ENET_CTL_DISABLE_SHIFT 1 +#define ENET_CTL_DISABLE_MASK (1 << ENET_CTL_DISABLE_SHIFT) +#define ENET_CTL_SRESET_SHIFT 2 +#define ENET_CTL_SRESET_MASK (1 << ENET_CTL_SRESET_SHIFT) +#define ENET_CTL_EPHYSEL_SHIFT 3 +#define ENET_CTL_EPHYSEL_MASK (1 << ENET_CTL_EPHYSEL_SHIFT) + +/* Transmit Control register */ +#define ENET_TXCTL_REG 0x30 +#define ENET_TXCTL_FD_SHIFT 0 +#define ENET_TXCTL_FD_MASK (1 << ENET_TXCTL_FD_SHIFT) + +/* Transmit Watermask register */ +#define ENET_TXWMARK_REG 0x34 +#define ENET_TXWMARK_WM_SHIFT 0 +#define ENET_TXWMARK_WM_MASK (0x3f << ENET_TXWMARK_WM_SHIFT) + +/* MIB Control register */ +#define ENET_MIBCTL_REG 0x38 +#define ENET_MIBCTL_RDCLEAR_SHIFT 0 +#define ENET_MIBCTL_RDCLEAR_MASK (1 << ENET_MIBCTL_RDCLEAR_SHIFT) + +/* Perfect Match Data Low register */ +#define ENET_PML_REG(x) (0x58 + (x) * 8) +#define ENET_PMH_REG(x) (0x5c + (x) * 8) +#define ENET_PMH_DATAVALID_SHIFT 16 +#define ENET_PMH_DATAVALID_MASK (1 << ENET_PMH_DATAVALID_SHIFT) + +/* MIB register */ +#define ENET_MIB_REG(x) (0x200 + (x) * 4) +#define ENET_MIB_REG_COUNT 55 + + +/************************************************************************* + * _REG relative to RSET_ENETDMA + *************************************************************************/ + +/* Controller Configuration Register */ +#define ENETDMA_CFG_REG (0x0) +#define ENETDMA_CFG_EN_SHIFT 0 +#define ENETDMA_CFG_EN_MASK (1 << ENETDMA_CFG_EN_SHIFT) +#define ENETDMA_CFG_FLOWCH_MASK(x) (1 << ((x >> 1) + 1)) + +/* Flow Control Descriptor Low Threshold register */ +#define ENETDMA_FLOWCL_REG(x) (0x4 + (x) * 6) + +/* Flow Control Descriptor High Threshold register */ +#define ENETDMA_FLOWCH_REG(x) (0x8 + (x) * 6) + +/* Flow Control Descriptor Buffer Alloca Threshold register */ +#define ENETDMA_BUFALLOC_REG(x) (0xc + (x) * 6) +#define ENETDMA_BUFALLOC_FORCE_SHIFT 31 +#define ENETDMA_BUFALLOC_FORCE_MASK (1 << ENETDMA_BUFALLOC_FORCE_SHIFT) + +/* Channel Configuration register */ +#define ENETDMA_CHANCFG_REG(x) (0x100 + (x) * 0x10) +#define ENETDMA_CHANCFG_EN_SHIFT 0 +#define ENETDMA_CHANCFG_EN_MASK (1 << ENETDMA_CHANCFG_EN_SHIFT) +#define ENETDMA_CHANCFG_PKTHALT_SHIFT 1 +#define ENETDMA_CHANCFG_PKTHALT_MASK (1 << ENETDMA_CHANCFG_PKTHALT_SHIFT) + +/* Interrupt Control/Status register */ +#define ENETDMA_IR_REG(x) (0x104 + (x) * 0x10) +#define ENETDMA_IR_BUFDONE_MASK (1 << 0) +#define ENETDMA_IR_PKTDONE_MASK (1 << 1) +#define ENETDMA_IR_NOTOWNER_MASK (1 << 2) + +/* Interrupt Mask register */ +#define ENETDMA_IRMASK_REG(x) (0x108 + (x) * 0x10) + +/* Maximum Burst Length */ +#define ENETDMA_MAXBURST_REG(x) (0x10C + (x) * 0x10) + +/* Ring Start Address register */ +#define ENETDMA_RSTART_REG(x) (0x200 + (x) * 0x10) + +/* State Ram Word 2 */ +#define ENETDMA_SRAM2_REG(x) (0x204 + (x) * 0x10) + +/* State Ram Word 3 */ +#define ENETDMA_SRAM3_REG(x) (0x208 + (x) * 0x10) + +/* State Ram Word 4 */ +#define ENETDMA_SRAM4_REG(x) (0x20c + (x) * 0x10) + + +/************************************************************************* + * _REG relative to RSET_OHCI_PRIV + *************************************************************************/ + +#define OHCI_PRIV_REG 0x0 +#define OHCI_PRIV_PORT1_HOST_SHIFT 0 +#define OHCI_PRIV_PORT1_HOST_MASK (1 << OHCI_PRIV_PORT1_HOST_SHIFT) +#define OHCI_PRIV_REG_SWAP_SHIFT 3 +#define OHCI_PRIV_REG_SWAP_MASK (1 << OHCI_PRIV_REG_SWAP_SHIFT) + + +/************************************************************************* + * _REG relative to RSET_USBH_PRIV + *************************************************************************/ + +#define USBH_PRIV_SWAP_REG 0x0 +#define USBH_PRIV_SWAP_EHCI_ENDN_SHIFT 4 +#define USBH_PRIV_SWAP_EHCI_ENDN_MASK (1 << USBH_PRIV_SWAP_EHCI_ENDN_SHIFT) +#define USBH_PRIV_SWAP_EHCI_DATA_SHIFT 3 +#define USBH_PRIV_SWAP_EHCI_DATA_MASK (1 << USBH_PRIV_SWAP_EHCI_DATA_SHIFT) +#define USBH_PRIV_SWAP_OHCI_ENDN_SHIFT 1 +#define USBH_PRIV_SWAP_OHCI_ENDN_MASK (1 << USBH_PRIV_SWAP_OHCI_ENDN_SHIFT) +#define USBH_PRIV_SWAP_OHCI_DATA_SHIFT 0 +#define USBH_PRIV_SWAP_OHCI_DATA_MASK (1 << USBH_PRIV_SWAP_OHCI_DATA_SHIFT) + +#define USBH_PRIV_TEST_REG 0x24 + + +/************************************************************************* + * _REG relative to RSET_MPI + *************************************************************************/ + +/* well known (hard wired) chip select */ +#define MPI_CS_PCMCIA_COMMON 4 +#define MPI_CS_PCMCIA_ATTR 5 +#define MPI_CS_PCMCIA_IO 6 + +/* Chip select base register */ +#define MPI_CSBASE_REG(x) (0x0 + (x) * 8) +#define MPI_CSBASE_BASE_SHIFT 13 +#define MPI_CSBASE_BASE_MASK (0x1ffff << MPI_CSBASE_BASE_SHIFT) +#define MPI_CSBASE_SIZE_SHIFT 0 +#define MPI_CSBASE_SIZE_MASK (0xf << MPI_CSBASE_SIZE_SHIFT) + +#define MPI_CSBASE_SIZE_8K 0 +#define MPI_CSBASE_SIZE_16K 1 +#define MPI_CSBASE_SIZE_32K 2 +#define MPI_CSBASE_SIZE_64K 3 +#define MPI_CSBASE_SIZE_128K 4 +#define MPI_CSBASE_SIZE_256K 5 +#define MPI_CSBASE_SIZE_512K 6 +#define MPI_CSBASE_SIZE_1M 7 +#define MPI_CSBASE_SIZE_2M 8 +#define MPI_CSBASE_SIZE_4M 9 +#define MPI_CSBASE_SIZE_8M 10 +#define MPI_CSBASE_SIZE_16M 11 +#define MPI_CSBASE_SIZE_32M 12 +#define MPI_CSBASE_SIZE_64M 13 +#define MPI_CSBASE_SIZE_128M 14 +#define MPI_CSBASE_SIZE_256M 15 + +/* Chip select control register */ +#define MPI_CSCTL_REG(x) (0x4 + (x) * 8) +#define MPI_CSCTL_ENABLE_MASK (1 << 0) +#define MPI_CSCTL_WAIT_SHIFT 1 +#define MPI_CSCTL_WAIT_MASK (0x7 << MPI_CSCTL_WAIT_SHIFT) +#define MPI_CSCTL_DATA16_MASK (1 << 4) +#define MPI_CSCTL_SYNCMODE_MASK (1 << 7) +#define MPI_CSCTL_TSIZE_MASK (1 << 8) +#define MPI_CSCTL_ENDIANSWAP_MASK (1 << 10) +#define MPI_CSCTL_SETUP_SHIFT 16 +#define MPI_CSCTL_SETUP_MASK (0xf << MPI_CSCTL_SETUP_SHIFT) +#define MPI_CSCTL_HOLD_SHIFT 20 +#define MPI_CSCTL_HOLD_MASK (0xf << MPI_CSCTL_HOLD_SHIFT) + +/* PCI registers */ +#define MPI_SP0_RANGE_REG 0x100 +#define MPI_SP0_REMAP_REG 0x104 +#define MPI_SP0_REMAP_ENABLE_MASK (1 << 0) +#define MPI_SP1_RANGE_REG 0x10C +#define MPI_SP1_REMAP_REG 0x110 +#define MPI_SP1_REMAP_ENABLE_MASK (1 << 0) + +#define MPI_L2PCFG_REG 0x11C +#define MPI_L2PCFG_CFG_TYPE_SHIFT 0 +#define MPI_L2PCFG_CFG_TYPE_MASK (0x3 << MPI_L2PCFG_CFG_TYPE_SHIFT) +#define MPI_L2PCFG_REG_SHIFT 2 +#define MPI_L2PCFG_REG_MASK (0x3f << MPI_L2PCFG_REG_SHIFT) +#define MPI_L2PCFG_FUNC_SHIFT 8 +#define MPI_L2PCFG_FUNC_MASK (0x7 << MPI_L2PCFG_FUNC_SHIFT) +#define MPI_L2PCFG_DEVNUM_SHIFT 11 +#define MPI_L2PCFG_DEVNUM_MASK (0x1f << MPI_L2PCFG_DEVNUM_SHIFT) +#define MPI_L2PCFG_CFG_USEREG_MASK (1 << 30) +#define MPI_L2PCFG_CFG_SEL_MASK (1 << 31) + +#define MPI_L2PMEMRANGE1_REG 0x120 +#define MPI_L2PMEMBASE1_REG 0x124 +#define MPI_L2PMEMREMAP1_REG 0x128 +#define MPI_L2PMEMRANGE2_REG 0x12C +#define MPI_L2PMEMBASE2_REG 0x130 +#define MPI_L2PMEMREMAP2_REG 0x134 +#define MPI_L2PIORANGE_REG 0x138 +#define MPI_L2PIOBASE_REG 0x13C +#define MPI_L2PIOREMAP_REG 0x140 +#define MPI_L2P_BASE_MASK (0xffff8000) +#define MPI_L2PREMAP_ENABLED_MASK (1 << 0) +#define MPI_L2PREMAP_IS_CARDBUS_MASK (1 << 2) + +#define MPI_PCIMODESEL_REG 0x144 +#define MPI_PCIMODESEL_BAR1_NOSWAP_MASK (1 << 0) +#define MPI_PCIMODESEL_BAR2_NOSWAP_MASK (1 << 1) +#define MPI_PCIMODESEL_EXT_ARB_MASK (1 << 2) +#define MPI_PCIMODESEL_PREFETCH_SHIFT 4 +#define MPI_PCIMODESEL_PREFETCH_MASK (0xf << MPI_PCIMODESEL_PREFETCH_SHIFT) + +#define MPI_LOCBUSCTL_REG 0x14C +#define MPI_LOCBUSCTL_EN_PCI_GPIO_MASK (1 << 0) +#define MPI_LOCBUSCTL_U2P_NOSWAP_MASK (1 << 1) + +#define MPI_LOCINT_REG 0x150 +#define MPI_LOCINT_MASK(x) (1 << (x + 16)) +#define MPI_LOCINT_STAT(x) (1 << (x)) +#define MPI_LOCINT_DIR_FAILED 6 +#define MPI_LOCINT_EXT_PCI_INT 7 +#define MPI_LOCINT_SERR 8 +#define MPI_LOCINT_CSERR 9 + +#define MPI_PCICFGCTL_REG 0x178 +#define MPI_PCICFGCTL_CFGADDR_SHIFT 2 +#define MPI_PCICFGCTL_CFGADDR_MASK (0x1f << MPI_PCICFGCTL_CFGADDR_SHIFT) +#define MPI_PCICFGCTL_WRITEEN_MASK (1 << 7) + +#define MPI_PCICFGDATA_REG 0x17C + +/* PCI host bridge custom register */ +#define BCMPCI_REG_TIMERS 0x40 +#define REG_TIMER_TRDY_SHIFT 0 +#define REG_TIMER_TRDY_MASK (0xff << REG_TIMER_TRDY_SHIFT) +#define REG_TIMER_RETRY_SHIFT 8 +#define REG_TIMER_RETRY_MASK (0xff << REG_TIMER_RETRY_SHIFT) + + +/************************************************************************* + * _REG relative to RSET_PCMCIA + *************************************************************************/ + +#define PCMCIA_C1_REG 0x0 +#define PCMCIA_C1_CD1_MASK (1 << 0) +#define PCMCIA_C1_CD2_MASK (1 << 1) +#define PCMCIA_C1_VS1_MASK (1 << 2) +#define PCMCIA_C1_VS2_MASK (1 << 3) +#define PCMCIA_C1_VS1OE_MASK (1 << 6) +#define PCMCIA_C1_VS2OE_MASK (1 << 7) +#define PCMCIA_C1_CBIDSEL_SHIFT (8) +#define PCMCIA_C1_CBIDSEL_MASK (0x1f << PCMCIA_C1_CBIDSEL_SHIFT) +#define PCMCIA_C1_EN_PCMCIA_GPIO_MASK (1 << 13) +#define PCMCIA_C1_EN_PCMCIA_MASK (1 << 14) +#define PCMCIA_C1_EN_CARDBUS_MASK (1 << 15) +#define PCMCIA_C1_RESET_MASK (1 << 18) + +#define PCMCIA_C2_REG 0x8 +#define PCMCIA_C2_DATA16_MASK (1 << 0) +#define PCMCIA_C2_BYTESWAP_MASK (1 << 1) +#define PCMCIA_C2_RWCOUNT_SHIFT 2 +#define PCMCIA_C2_RWCOUNT_MASK (0x3f << PCMCIA_C2_RWCOUNT_SHIFT) +#define PCMCIA_C2_INACTIVE_SHIFT 8 +#define PCMCIA_C2_INACTIVE_MASK (0x3f << PCMCIA_C2_INACTIVE_SHIFT) +#define PCMCIA_C2_SETUP_SHIFT 16 +#define PCMCIA_C2_SETUP_MASK (0x3f << PCMCIA_C2_SETUP_SHIFT) +#define PCMCIA_C2_HOLD_SHIFT 24 +#define PCMCIA_C2_HOLD_MASK (0x3f << PCMCIA_C2_HOLD_SHIFT) + + +/************************************************************************* + * _REG relative to RSET_SDRAM + *************************************************************************/ + +#define SDRAM_CFG_REG 0x0 +#define SDRAM_CFG_ROW_SHIFT 4 +#define SDRAM_CFG_ROW_MASK (0x3 << SDRAM_CFG_ROW_SHIFT) +#define SDRAM_CFG_COL_SHIFT 6 +#define SDRAM_CFG_COL_MASK (0x3 << SDRAM_CFG_COL_SHIFT) +#define SDRAM_CFG_32B_SHIFT 10 +#define SDRAM_CFG_32B_MASK (1 << SDRAM_CFG_32B_SHIFT) +#define SDRAM_CFG_BANK_SHIFT 13 +#define SDRAM_CFG_BANK_MASK (1 << SDRAM_CFG_BANK_SHIFT) + +#define SDRAM_PRIO_REG 0x2C +#define SDRAM_PRIO_MIPS_SHIFT 29 +#define SDRAM_PRIO_MIPS_MASK (1 << SDRAM_PRIO_MIPS_SHIFT) +#define SDRAM_PRIO_ADSL_SHIFT 30 +#define SDRAM_PRIO_ADSL_MASK (1 << SDRAM_PRIO_ADSL_SHIFT) +#define SDRAM_PRIO_EN_SHIFT 31 +#define SDRAM_PRIO_EN_MASK (1 << SDRAM_PRIO_EN_SHIFT) + + +/************************************************************************* + * _REG relative to RSET_MEMC + *************************************************************************/ + +#define MEMC_CFG_REG 0x4 +#define MEMC_CFG_32B_SHIFT 1 +#define MEMC_CFG_32B_MASK (1 << MEMC_CFG_32B_SHIFT) +#define MEMC_CFG_COL_SHIFT 3 +#define MEMC_CFG_COL_MASK (0x3 << MEMC_CFG_COL_SHIFT) +#define MEMC_CFG_ROW_SHIFT 6 +#define MEMC_CFG_ROW_MASK (0x3 << MEMC_CFG_ROW_SHIFT) + + +/************************************************************************* + * _REG relative to RSET_DDR + *************************************************************************/ + +#define DDR_DMIPSPLLCFG_REG 0x18 +#define DMIPSPLLCFG_M1_SHIFT 0 +#define DMIPSPLLCFG_M1_MASK (0xff << DMIPSPLLCFG_M1_SHIFT) +#define DMIPSPLLCFG_N1_SHIFT 23 +#define DMIPSPLLCFG_N1_MASK (0x3f << DMIPSPLLCFG_N1_SHIFT) +#define DMIPSPLLCFG_N2_SHIFT 29 +#define DMIPSPLLCFG_N2_MASK (0x7 << DMIPSPLLCFG_N2_SHIFT) + +#endif /* BCM63XX_REGS_H_ */ + diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_timer.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_timer.h new file mode 100644 index 00000000000..c0fce833c9e --- /dev/null +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_timer.h @@ -0,0 +1,11 @@ +#ifndef BCM63XX_TIMER_H_ +#define BCM63XX_TIMER_H_ + +int bcm63xx_timer_register(int id, void (*callback)(void *data), void *data); +void bcm63xx_timer_unregister(int id); +int bcm63xx_timer_set(int id, int monotonic, unsigned int countdown_us); +int bcm63xx_timer_enable(int id); +int bcm63xx_timer_disable(int id); +unsigned int bcm63xx_timer_countdown(unsigned int countdown_us); + +#endif /* !BCM63XX_TIMER_H_ */ diff --git a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h new file mode 100644 index 00000000000..6479090a410 --- /dev/null +++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h @@ -0,0 +1,60 @@ +#ifndef BOARD_BCM963XX_H_ +#define BOARD_BCM963XX_H_ + +#include <linux/types.h> +#include <linux/gpio.h> +#include <linux/leds.h> +#include <bcm63xx_dev_enet.h> +#include <bcm63xx_dev_dsp.h> + +/* + * flash mapping + */ +#define BCM963XX_CFE_VERSION_OFFSET 0x570 +#define BCM963XX_NVRAM_OFFSET 0x580 + +/* + * nvram structure + */ +struct bcm963xx_nvram { + u32 version; + u8 reserved1[256]; + u8 name[16]; + u32 main_tp_number; + u32 psi_size; + u32 mac_addr_count; + u8 mac_addr_base[6]; + u8 reserved2[2]; + u32 checksum_old; + u8 reserved3[720]; + u32 checksum_high; +}; + +/* + * board definition + */ +struct board_info { + u8 name[16]; + unsigned int expected_cpu_id; + + /* enabled feature/device */ + unsigned int has_enet0:1; + unsigned int has_enet1:1; + unsigned int has_pci:1; + unsigned int has_pccard:1; + unsigned int has_ohci0:1; + unsigned int has_ehci0:1; + unsigned int has_dsp:1; + + /* ethernet config */ + struct bcm63xx_enet_platform_data enet0; + struct bcm63xx_enet_platform_data enet1; + + /* DSP config */ + struct bcm63xx_dsp_platform_data dsp; + + /* GPIO LEDs */ + struct gpio_led leds[5]; +}; + +#endif /* ! BOARD_BCM963XX_H_ */ diff --git a/arch/mips/include/asm/mach-bcm63xx/cpu-feature-overrides.h b/arch/mips/include/asm/mach-bcm63xx/cpu-feature-overrides.h new file mode 100644 index 00000000000..71742bac940 --- /dev/null +++ b/arch/mips/include/asm/mach-bcm63xx/cpu-feature-overrides.h @@ -0,0 +1,51 @@ +#ifndef __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H +#define __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H + +#include <bcm63xx_cpu.h> + +#define cpu_has_tlb 1 +#define cpu_has_4kex 1 +#define cpu_has_4k_cache 1 +#define cpu_has_fpu 0 +#define cpu_has_32fpr 0 +#define cpu_has_counter 1 +#define cpu_has_watch 0 +#define cpu_has_divec 1 +#define cpu_has_vce 0 +#define cpu_has_cache_cdex_p 0 +#define cpu_has_cache_cdex_s 0 +#define cpu_has_prefetch 1 +#define cpu_has_mcheck 1 +#define cpu_has_ejtag 1 +#define cpu_has_llsc 1 +#define cpu_has_mips16 0 +#define cpu_has_mdmx 0 +#define cpu_has_mips3d 0 +#define cpu_has_smartmips 0 +#define cpu_has_vtag_icache 0 + +#if !defined(BCMCPU_RUNTIME_DETECT) && (defined(CONFIG_BCMCPU_IS_6348) || defined(CONFIG_CPU_IS_6338) || defined(CONFIG_CPU_IS_BCM6345)) +#define cpu_has_dc_aliases 0 +#endif + +#define cpu_has_ic_fills_f_dc 0 +#define cpu_has_pindexed_dcache 0 + +#define cpu_has_mips32r1 1 +#define cpu_has_mips32r2 0 +#define cpu_has_mips64r1 0 +#define cpu_has_mips64r2 0 + +#define cpu_has_dsp 0 +#define cpu_has_mipsmt 0 +#define cpu_has_userlocal 0 + +#define cpu_has_nofpuex 0 +#define cpu_has_64bits 0 +#define cpu_has_64bit_zero_reg 0 + +#define cpu_dcache_line_size() 16 +#define cpu_icache_line_size() 16 +#define cpu_scache_line_size() 0 + +#endif /* __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H */ diff --git a/arch/mips/include/asm/mach-bcm63xx/gpio.h b/arch/mips/include/asm/mach-bcm63xx/gpio.h new file mode 100644 index 00000000000..7cda8c0a397 --- /dev/null +++ b/arch/mips/include/asm/mach-bcm63xx/gpio.h @@ -0,0 +1,15 @@ +#ifndef __ASM_MIPS_MACH_BCM63XX_GPIO_H +#define __ASM_MIPS_MACH_BCM63XX_GPIO_H + +#include <bcm63xx_gpio.h> + +#define gpio_to_irq(gpio) NULL + +#define gpio_get_value __gpio_get_value +#define gpio_set_value __gpio_set_value + +#define gpio_cansleep __gpio_cansleep + +#include <asm-generic/gpio.h> + +#endif /* __ASM_MIPS_MACH_BCM63XX_GPIO_H */ diff --git a/arch/mips/include/asm/mach-bcm63xx/war.h b/arch/mips/include/asm/mach-bcm63xx/war.h new file mode 100644 index 00000000000..8e3f3fdf320 --- /dev/null +++ b/arch/mips/include/asm/mach-bcm63xx/war.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> + */ +#ifndef __ASM_MIPS_MACH_BCM63XX_WAR_H +#define __ASM_MIPS_MACH_BCM63XX_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_BCM63XX_WAR_H */ diff --git a/arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h b/arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h index 3d830756b13..425e708d4fb 100644 --- a/arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h +++ b/arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h @@ -31,12 +31,16 @@ #define cpu_has_cache_cdex_s 0 #define cpu_has_prefetch 1 +#define cpu_has_llsc 1 /* - * We should disable LL/SC on non SMP systems as it is faster to - * disable interrupts for atomic access than a LL/SC. Unfortunatly we - * cannot as this breaks asm/futex.h + * We Disable LL/SC on non SMP systems as it is faster to disable + * interrupts for atomic access than a LL/SC. */ -#define cpu_has_llsc 1 +#ifdef CONFIG_SMP +# define kernel_uses_llsc 1 +#else +# define kernel_uses_llsc 0 +#endif #define cpu_has_vtag_icache 1 #define cpu_has_dc_aliases 0 #define cpu_has_ic_fills_f_dc 0 diff --git a/arch/mips/include/asm/mach-ip27/topology.h b/arch/mips/include/asm/mach-ip27/topology.h index 07547231e07..f6837422fe6 100644 --- a/arch/mips/include/asm/mach-ip27/topology.h +++ b/arch/mips/include/asm/mach-ip27/topology.h @@ -24,12 +24,10 @@ extern struct cpuinfo_ip27 sn_cpu_info[NR_CPUS]; #define cpu_to_node(cpu) (sn_cpu_info[(cpu)].p_nodeid) #define parent_node(node) (node) -#define node_to_cpumask(node) (hub_data(node)->h_cpus) #define cpumask_of_node(node) (&hub_data(node)->h_cpus) struct pci_bus; extern int pcibus_to_node(struct pci_bus *); -#define pcibus_to_cpumask(bus) (cpu_online_map) #define cpumask_of_pcibus(bus) (cpu_online_mask) extern unsigned char __node_distances[MAX_COMPACT_NODES][MAX_COMPACT_NODES]; @@ -48,7 +46,6 @@ extern unsigned char __node_distances[MAX_COMPACT_NODES][MAX_COMPACT_NODES]; .cache_nice_tries = 1, \ .flags = SD_LOAD_BALANCE \ | SD_BALANCE_EXEC \ - | SD_WAKE_BALANCE, \ .last_balance = jiffies, \ .balance_interval = 1, \ .nr_balance_failed = 0, \ diff --git a/arch/mips/include/asm/mach-lemote/cpu-feature-overrides.h b/arch/mips/include/asm/mach-loongson/cpu-feature-overrides.h index 550a10dc9db..ce5b6e270e3 100644 --- a/arch/mips/include/asm/mach-lemote/cpu-feature-overrides.h +++ b/arch/mips/include/asm/mach-loongson/cpu-feature-overrides.h @@ -13,8 +13,8 @@ * loongson2f user manual. */ -#ifndef __ASM_MACH_LEMOTE_CPU_FEATURE_OVERRIDES_H -#define __ASM_MACH_LEMOTE_CPU_FEATURE_OVERRIDES_H +#ifndef __ASM_MACH_LOONGSON_CPU_FEATURE_OVERRIDES_H +#define __ASM_MACH_LOONGSON_CPU_FEATURE_OVERRIDES_H #define cpu_dcache_line_size() 32 #define cpu_icache_line_size() 32 @@ -56,4 +56,4 @@ #define cpu_has_watch 1 #define cpu_icache_snoops_remote_store 1 -#endif /* __ASM_MACH_LEMOTE_CPU_FEATURE_OVERRIDES_H */ +#endif /* __ASM_MACH_LOONGSON_CPU_FEATURE_OVERRIDES_H */ diff --git a/arch/mips/include/asm/mach-lemote/dma-coherence.h b/arch/mips/include/asm/mach-loongson/dma-coherence.h index c8de5e75077..71a6851ba83 100644 --- a/arch/mips/include/asm/mach-lemote/dma-coherence.h +++ b/arch/mips/include/asm/mach-loongson/dma-coherence.h @@ -8,8 +8,8 @@ * Author: Fuxin Zhang, zhangfx@lemote.com * */ -#ifndef __ASM_MACH_LEMOTE_DMA_COHERENCE_H -#define __ASM_MACH_LEMOTE_DMA_COHERENCE_H +#ifndef __ASM_MACH_LOONGSON_DMA_COHERENCE_H +#define __ASM_MACH_LOONGSON_DMA_COHERENCE_H struct device; @@ -65,4 +65,4 @@ static inline int plat_device_is_coherent(struct device *dev) return 0; } -#endif /* __ASM_MACH_LEMOTE_DMA_COHERENCE_H */ +#endif /* __ASM_MACH_LOONGSON_DMA_COHERENCE_H */ diff --git a/arch/mips/include/asm/mach-loongson/loongson.h b/arch/mips/include/asm/mach-loongson/loongson.h new file mode 100644 index 00000000000..da70bcf2304 --- /dev/null +++ b/arch/mips/include/asm/mach-loongson/loongson.h @@ -0,0 +1,64 @@ +/* + * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology + * Author: Wu Zhangjin <wuzj@lemote.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __ASM_MACH_LOONGSON_LOONGSON_H +#define __ASM_MACH_LOONGSON_LOONGSON_H + +#include <linux/io.h> +#include <linux/init.h> + +/* there is an internal bonito64-compatiable northbridge in loongson2e/2f */ +#include <asm/mips-boards/bonito64.h> + +/* loongson internal northbridge initialization */ +extern void bonito_irq_init(void); + +/* machine-specific reboot/halt operation */ +extern void mach_prepare_reboot(void); +extern void mach_prepare_shutdown(void); + +/* environment arguments from bootloader */ +extern unsigned long bus_clock, cpu_clock_freq; +extern unsigned long memsize, highmemsize; + +/* loongson-specific command line, env and memory initialization */ +extern void __init prom_init_memory(void); +extern void __init prom_init_cmdline(void); +extern void __init prom_init_env(void); + +/* irq operation functions */ +extern void bonito_irqdispatch(void); +extern void __init bonito_irq_init(void); +extern void __init set_irq_trigger_mode(void); +extern void __init mach_init_irq(void); +extern void mach_irq_dispatch(unsigned int pending); + +/* PCI Configuration Registers */ +#define LOONGSON_PCI_ISR4C BONITO_PCI_REG(0x4c) + +/* PCI_Hit*_Sel_* */ + +#define LOONGSON_PCI_HIT0_SEL_L BONITO(BONITO_REGBASE + 0x50) +#define LOONGSON_PCI_HIT0_SEL_H BONITO(BONITO_REGBASE + 0x54) +#define LOONGSON_PCI_HIT1_SEL_L BONITO(BONITO_REGBASE + 0x58) +#define LOONGSON_PCI_HIT1_SEL_H BONITO(BONITO_REGBASE + 0x5c) +#define LOONGSON_PCI_HIT2_SEL_L BONITO(BONITO_REGBASE + 0x60) +#define LOONGSON_PCI_HIT2_SEL_H BONITO(BONITO_REGBASE + 0x64) + +/* PXArb Config & Status */ + +#define LOONGSON_PXARB_CFG BONITO(BONITO_REGBASE + 0x68) +#define LOONGSON_PXARB_STATUS BONITO(BONITO_REGBASE + 0x6c) + +/* loongson2-specific perf counter IRQ */ +#define LOONGSON2_PERFCNT_IRQ (MIPS_CPU_IRQ_BASE + 6) + +#endif /* __ASM_MACH_LOONGSON_LOONGSON_H */ diff --git a/arch/mips/include/asm/mach-loongson/machine.h b/arch/mips/include/asm/mach-loongson/machine.h new file mode 100644 index 00000000000..206ea206791 --- /dev/null +++ b/arch/mips/include/asm/mach-loongson/machine.h @@ -0,0 +1,22 @@ +/* + * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology + * Author: Wu Zhangjin <wuzj@lemote.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __ASM_MACH_LOONGSON_MACHINE_H +#define __ASM_MACH_LOONGSON_MACHINE_H + +#ifdef CONFIG_LEMOTE_FULOONG2E + +#define LOONGSON_UART_BASE (BONITO_PCIIO_BASE + 0x3f8) + +#define LOONGSON_MACHTYPE MACH_LEMOTE_FL2E + +#endif + +#endif /* __ASM_MACH_LOONGSON_MACHINE_H */ diff --git a/arch/mips/include/asm/mach-lemote/mc146818rtc.h b/arch/mips/include/asm/mach-loongson/mc146818rtc.h index ed5147e1108..ed7fe978335 100644 --- a/arch/mips/include/asm/mach-lemote/mc146818rtc.h +++ b/arch/mips/include/asm/mach-loongson/mc146818rtc.h @@ -7,8 +7,8 @@ * * RTC routines for PC style attached Dallas chip. */ -#ifndef __ASM_MACH_LEMOTE_MC146818RTC_H -#define __ASM_MACH_LEMOTE_MC146818RTC_H +#ifndef __ASM_MACH_LOONGSON_MC146818RTC_H +#define __ASM_MACH_LOONGSON_MC146818RTC_H #include <linux/io.h> @@ -33,4 +33,4 @@ static inline void CMOS_WRITE(unsigned char data, unsigned long addr) #define mc146818_decode_year(year) ((year) < 70 ? (year) + 2000 : (year) + 1970) #endif -#endif /* __ASM_MACH_LEMOTE_MC146818RTC_H */ +#endif /* __ASM_MACH_LOONGSON_MC146818RTC_H */ diff --git a/arch/mips/include/asm/mach-loongson/mem.h b/arch/mips/include/asm/mach-loongson/mem.h new file mode 100644 index 00000000000..bd7b3cba7e3 --- /dev/null +++ b/arch/mips/include/asm/mach-loongson/mem.h @@ -0,0 +1,30 @@ +/* + * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology + * Author: Wu Zhangjin <wuzj@lemote.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __ASM_MACH_LOONGSON_MEM_H +#define __ASM_MACH_LOONGSON_MEM_H + +/* + * On Lemote Loongson 2e + * + * the high memory space starts from 512M. + * the peripheral registers reside between 0x1000:0000 and 0x2000:0000. + */ + +#ifdef CONFIG_LEMOTE_FULOONG2E + +#define LOONGSON_HIGHMEM_START 0x20000000 + +#define LOONGSON_MMIO_MEM_START 0x10000000 +#define LOONGSON_MMIO_MEM_END 0x20000000 + +#endif + +#endif /* __ASM_MACH_LOONGSON_MEM_H */ diff --git a/arch/mips/include/asm/mach-lemote/pci.h b/arch/mips/include/asm/mach-loongson/pci.h index ea6aa143b78..f1663ca81da 100644 --- a/arch/mips/include/asm/mach-lemote/pci.h +++ b/arch/mips/include/asm/mach-loongson/pci.h @@ -19,12 +19,19 @@ * 02139, USA. */ -#ifndef _LEMOTE_PCI_H_ -#define _LEMOTE_PCI_H_ +#ifndef __ASM_MACH_LOONGSON_PCI_H_ +#define __ASM_MACH_LOONGSON_PCI_H_ -#define LOONGSON2E_PCI_MEM_START 0x14000000UL -#define LOONGSON2E_PCI_MEM_END 0x1fffffffUL -#define LOONGSON2E_PCI_IO_START 0x00004000UL -#define LOONGSON2E_IO_PORT_BASE 0x1fd00000UL +extern struct pci_ops bonito64_pci_ops; -#endif /* !_LEMOTE_PCI_H_ */ +#ifdef CONFIG_LEMOTE_FULOONG2E + +/* this pci memory space is mapped by pcimap in pci.c */ +#define LOONGSON_PCI_MEM_START BONITO_PCILO1_BASE +#define LOONGSON_PCI_MEM_END (BONITO_PCILO1_BASE + 0x04000000 * 2) +/* this is an offset from mips_io_port_base */ +#define LOONGSON_PCI_IO_START 0x00004000UL + +#endif + +#endif /* !__ASM_MACH_LOONGSON_PCI_H_ */ diff --git a/arch/mips/include/asm/mach-lemote/war.h b/arch/mips/include/asm/mach-loongson/war.h index 05f89e0f2a1..4b971c3ffd8 100644 --- a/arch/mips/include/asm/mach-lemote/war.h +++ b/arch/mips/include/asm/mach-loongson/war.h @@ -5,8 +5,8 @@ * * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> */ -#ifndef __ASM_MIPS_MACH_LEMOTE_WAR_H -#define __ASM_MIPS_MACH_LEMOTE_WAR_H +#ifndef __ASM_MACH_LOONGSON_WAR_H +#define __ASM_MACH_LOONGSON_WAR_H #define R4600_V1_INDEX_ICACHEOP_WAR 0 #define R4600_V1_HIT_CACHEOP_WAR 0 @@ -22,4 +22,4 @@ #define R10000_LLSC_WAR 0 #define MIPS34K_MISSED_ITLB_WAR 0 -#endif /* __ASM_MIPS_MACH_LEMOTE_WAR_H */ +#endif /* __ASM_MACH_LEMOTE_WAR_H */ diff --git a/arch/mips/include/asm/mach-malta/cpu-feature-overrides.h b/arch/mips/include/asm/mach-malta/cpu-feature-overrides.h index 7f3e3f9bd23..2848cea42bc 100644 --- a/arch/mips/include/asm/mach-malta/cpu-feature-overrides.h +++ b/arch/mips/include/asm/mach-malta/cpu-feature-overrides.h @@ -28,11 +28,7 @@ /* #define cpu_has_prefetch ? */ #define cpu_has_mcheck 1 /* #define cpu_has_ejtag ? */ -#ifdef CONFIG_CPU_HAS_LLSC #define cpu_has_llsc 1 -#else -#define cpu_has_llsc 0 -#endif /* #define cpu_has_vtag_icache ? */ /* #define cpu_has_dc_aliases ? */ /* #define cpu_has_ic_fills_f_dc ? */ diff --git a/arch/mips/include/asm/mips-boards/bonito64.h b/arch/mips/include/asm/mips-boards/bonito64.h index a0f04bb99c9..a576ce044c3 100644 --- a/arch/mips/include/asm/mips-boards/bonito64.h +++ b/arch/mips/include/asm/mips-boards/bonito64.h @@ -26,7 +26,7 @@ /* offsets from base register */ #define BONITO(x) (x) -#elif defined(CONFIG_LEMOTE_FULONG) +#elif defined(CONFIG_LEMOTE_FULOONG2E) #define BONITO(x) (*(volatile u32 *)((char *)CKSEG1ADDR(BONITO_REG_BASE) + (x))) #define BONITO_IRQ_BASE 32 diff --git a/arch/mips/include/asm/mips-boards/generic.h b/arch/mips/include/asm/mips-boards/generic.h index c0da1a881e3..46c08563e53 100644 --- a/arch/mips/include/asm/mips-boards/generic.h +++ b/arch/mips/include/asm/mips-boards/generic.h @@ -87,8 +87,6 @@ extern int mips_revision_sconid; -extern void mips_reboot_setup(void); - #ifdef CONFIG_PCI extern void mips_pcibios_init(void); #else diff --git a/arch/mips/include/asm/mman.h b/arch/mips/include/asm/mman.h index e4d6f1fb1cf..a2250f390a2 100644 --- a/arch/mips/include/asm/mman.h +++ b/arch/mips/include/asm/mman.h @@ -46,6 +46,8 @@ #define MAP_LOCKED 0x8000 /* pages are locked */ #define MAP_POPULATE 0x10000 /* populate (prefault) pagetables */ #define MAP_NONBLOCK 0x20000 /* do not block on IO */ +#define MAP_STACK 0x40000 /* give out an address that is best suited for process/thread stacks */ +#define MAP_HUGETLB 0x80000 /* create a huge page mapping */ /* * Flags for msync @@ -71,6 +73,9 @@ #define MADV_DONTFORK 10 /* don't inherit across fork */ #define MADV_DOFORK 11 /* do inherit across fork */ +#define MADV_MERGEABLE 12 /* KSM may merge identical pages */ +#define MADV_UNMERGEABLE 13 /* KSM may not merge identical pages */ + /* compatibility flags */ #define MAP_FILE 0 diff --git a/arch/mips/include/asm/mmu_context.h b/arch/mips/include/asm/mmu_context.h index d3bea88d874..d9743536a62 100644 --- a/arch/mips/include/asm/mmu_context.h +++ b/arch/mips/include/asm/mmu_context.h @@ -178,8 +178,8 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, * Mark current->active_mm as not "active" anymore. * We don't want to mislead possible IPI tlb flush routines. */ - cpu_clear(cpu, prev->cpu_vm_mask); - cpu_set(cpu, next->cpu_vm_mask); + cpumask_clear_cpu(cpu, mm_cpumask(prev)); + cpumask_set_cpu(cpu, mm_cpumask(next)); local_irq_restore(flags); } @@ -235,8 +235,8 @@ activate_mm(struct mm_struct *prev, struct mm_struct *next) TLBMISS_HANDLER_SETUP_PGD(next->pgd); /* mark mmu ownership change */ - cpu_clear(cpu, prev->cpu_vm_mask); - cpu_set(cpu, next->cpu_vm_mask); + cpumask_clear_cpu(cpu, mm_cpumask(prev)); + cpumask_set_cpu(cpu, mm_cpumask(next)); local_irq_restore(flags); } @@ -258,7 +258,7 @@ drop_mmu_context(struct mm_struct *mm, unsigned cpu) local_irq_save(flags); - if (cpu_isset(cpu, mm->cpu_vm_mask)) { + if (cpumask_test_cpu(cpu, mm_cpumask(mm))) { get_new_mmu_context(mm, cpu); #ifdef CONFIG_MIPS_MT_SMTC /* See comments for similar code above */ diff --git a/arch/mips/include/asm/octeon/cvmx-rnm-defs.h b/arch/mips/include/asm/octeon/cvmx-rnm-defs.h new file mode 100644 index 00000000000..4586958c97b --- /dev/null +++ b/arch/mips/include/asm/octeon/cvmx-rnm-defs.h @@ -0,0 +1,88 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (c) 2003-2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +#ifndef __CVMX_RNM_DEFS_H__ +#define __CVMX_RNM_DEFS_H__ + +#include <linux/types.h> + +#define CVMX_RNM_BIST_STATUS \ + CVMX_ADD_IO_SEG(0x0001180040000008ull) +#define CVMX_RNM_CTL_STATUS \ + CVMX_ADD_IO_SEG(0x0001180040000000ull) + +union cvmx_rnm_bist_status { + uint64_t u64; + struct cvmx_rnm_bist_status_s { + uint64_t reserved_2_63:62; + uint64_t rrc:1; + uint64_t mem:1; + } s; + struct cvmx_rnm_bist_status_s cn30xx; + struct cvmx_rnm_bist_status_s cn31xx; + struct cvmx_rnm_bist_status_s cn38xx; + struct cvmx_rnm_bist_status_s cn38xxp2; + struct cvmx_rnm_bist_status_s cn50xx; + struct cvmx_rnm_bist_status_s cn52xx; + struct cvmx_rnm_bist_status_s cn52xxp1; + struct cvmx_rnm_bist_status_s cn56xx; + struct cvmx_rnm_bist_status_s cn56xxp1; + struct cvmx_rnm_bist_status_s cn58xx; + struct cvmx_rnm_bist_status_s cn58xxp1; +}; + +union cvmx_rnm_ctl_status { + uint64_t u64; + struct cvmx_rnm_ctl_status_s { + uint64_t reserved_9_63:55; + uint64_t ent_sel:4; + uint64_t exp_ent:1; + uint64_t rng_rst:1; + uint64_t rnm_rst:1; + uint64_t rng_en:1; + uint64_t ent_en:1; + } s; + struct cvmx_rnm_ctl_status_cn30xx { + uint64_t reserved_4_63:60; + uint64_t rng_rst:1; + uint64_t rnm_rst:1; + uint64_t rng_en:1; + uint64_t ent_en:1; + } cn30xx; + struct cvmx_rnm_ctl_status_cn30xx cn31xx; + struct cvmx_rnm_ctl_status_cn30xx cn38xx; + struct cvmx_rnm_ctl_status_cn30xx cn38xxp2; + struct cvmx_rnm_ctl_status_s cn50xx; + struct cvmx_rnm_ctl_status_s cn52xx; + struct cvmx_rnm_ctl_status_s cn52xxp1; + struct cvmx_rnm_ctl_status_s cn56xx; + struct cvmx_rnm_ctl_status_s cn56xxp1; + struct cvmx_rnm_ctl_status_s cn58xx; + struct cvmx_rnm_ctl_status_s cn58xxp1; +}; + +#endif diff --git a/arch/mips/include/asm/octeon/cvmx.h b/arch/mips/include/asm/octeon/cvmx.h index e31e3fe14f8..9d9381e2e3d 100644 --- a/arch/mips/include/asm/octeon/cvmx.h +++ b/arch/mips/include/asm/octeon/cvmx.h @@ -271,7 +271,7 @@ static inline void cvmx_write_csr(uint64_t csr_addr, uint64_t val) * what RSL read we do, so we choose CVMX_MIO_BOOT_BIST_STAT * because it is fast and harmless. */ - if ((csr_addr >> 40) == (0x800118)) + if (((csr_addr >> 40) & 0x7ffff) == (0x118)) cvmx_read64(CVMX_MIO_BOOT_BIST_STAT); } diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h index 4320239cf4e..f266295cce5 100644 --- a/arch/mips/include/asm/page.h +++ b/arch/mips/include/asm/page.h @@ -10,6 +10,7 @@ #define _ASM_PAGE_H #include <spaces.h> +#include <linux/const.h> /* * PAGE_SHIFT determines the page size @@ -29,12 +30,12 @@ #ifdef CONFIG_PAGE_SIZE_64KB #define PAGE_SHIFT 16 #endif -#define PAGE_SIZE (1UL << PAGE_SHIFT) +#define PAGE_SIZE (_AC(1,UL) << PAGE_SHIFT) #define PAGE_MASK (~((1 << PAGE_SHIFT) - 1)) #ifdef CONFIG_HUGETLB_PAGE #define HPAGE_SHIFT (PAGE_SHIFT + PAGE_SHIFT - 3) -#define HPAGE_SIZE ((1UL) << HPAGE_SHIFT) +#define HPAGE_SIZE (_AC(1,UL) << HPAGE_SHIFT) #define HPAGE_MASK (~(HPAGE_SIZE - 1)) #define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT) #endif /* CONFIG_HUGETLB_PAGE */ diff --git a/arch/mips/include/asm/pci.h b/arch/mips/include/asm/pci.h index a68d111e55e..5ebf82572ec 100644 --- a/arch/mips/include/asm/pci.h +++ b/arch/mips/include/asm/pci.h @@ -65,8 +65,6 @@ extern int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin); extern unsigned int pcibios_assign_all_busses(void); -#define pcibios_scan_all_fns(a, b) 0 - extern unsigned long PCIBIOS_MIN_IO; extern unsigned long PCIBIOS_MIN_MEM; diff --git a/arch/mips/include/asm/pgtable-64.h b/arch/mips/include/asm/pgtable-64.h index 4ed9d1bba2b..9cd50899395 100644 --- a/arch/mips/include/asm/pgtable-64.h +++ b/arch/mips/include/asm/pgtable-64.h @@ -109,13 +109,13 @@ #define VMALLOC_START MAP_BASE #define VMALLOC_END \ - (VMALLOC_START + PTRS_PER_PGD * PTRS_PER_PMD * PTRS_PER_PTE * PAGE_SIZE) + (VMALLOC_START + \ + PTRS_PER_PGD * PTRS_PER_PMD * PTRS_PER_PTE * PAGE_SIZE - (1UL << 32)) #if defined(CONFIG_MODULES) && defined(KBUILD_64BIT_SYM32) && \ VMALLOC_START != CKSSEG /* Load modules into 32bit-compatible segment. */ #define MODULE_START CKSSEG #define MODULE_END (FIXADDR_START-2*PAGE_SIZE) -extern pgd_t module_pg_dir[PTRS_PER_PGD]; #endif #define pte_ERROR(e) \ @@ -188,12 +188,7 @@ static inline void pud_clear(pud_t *pudp) #define __pmd_offset(address) pmd_index(address) /* to find an entry in a kernel page-table-directory */ -#ifdef MODULE_START -#define pgd_offset_k(address) \ - ((address) >= MODULE_START ? module_pg_dir : pgd_offset(&init_mm, 0UL)) -#else -#define pgd_offset_k(address) pgd_offset(&init_mm, 0UL) -#endif +#define pgd_offset_k(address) pgd_offset(&init_mm, address) #define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1)) #define pmd_index(address) (((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1)) diff --git a/arch/mips/include/asm/pgtable.h b/arch/mips/include/asm/pgtable.h index 1a9f9b25755..d6eb6134abe 100644 --- a/arch/mips/include/asm/pgtable.h +++ b/arch/mips/include/asm/pgtable.h @@ -76,6 +76,16 @@ extern unsigned long zero_page_mask; #define ZERO_PAGE(vaddr) \ (virt_to_page((void *)(empty_zero_page + (((unsigned long)(vaddr)) & zero_page_mask)))) +#define is_zero_pfn is_zero_pfn +static inline int is_zero_pfn(unsigned long pfn) +{ + extern unsigned long zero_pfn; + unsigned long offset_from_zero_pfn = pfn - zero_pfn; + return offset_from_zero_pfn <= (zero_page_mask >> PAGE_SHIFT); +} + +#define my_zero_pfn(addr) page_to_pfn(ZERO_PAGE(addr)) + extern void paging_init(void); /* diff --git a/arch/mips/include/asm/smp-ops.h b/arch/mips/include/asm/smp-ops.h index fd545547b8a..9e09af34c8a 100644 --- a/arch/mips/include/asm/smp-ops.h +++ b/arch/mips/include/asm/smp-ops.h @@ -19,7 +19,7 @@ struct task_struct; struct plat_smp_ops { void (*send_ipi_single)(int cpu, unsigned int action); - void (*send_ipi_mask)(cpumask_t mask, unsigned int action); + void (*send_ipi_mask)(const struct cpumask *mask, unsigned int action); void (*init_secondary)(void); void (*smp_finish)(void); void (*cpus_done)(void); diff --git a/arch/mips/include/asm/smp.h b/arch/mips/include/asm/smp.h index aaa2d4ab26d..e15f11a0931 100644 --- a/arch/mips/include/asm/smp.h +++ b/arch/mips/include/asm/smp.h @@ -78,6 +78,6 @@ extern void play_dead(void); extern asmlinkage void smp_call_function_interrupt(void); extern void arch_send_call_function_single_ipi(int cpu); -extern void arch_send_call_function_ipi(cpumask_t mask); +extern void arch_send_call_function_ipi_mask(const struct cpumask *mask); #endif /* __ASM_SMP_H */ diff --git a/arch/mips/include/asm/system.h b/arch/mips/include/asm/system.h index cd30f83235b..fcf5f98d90c 100644 --- a/arch/mips/include/asm/system.h +++ b/arch/mips/include/asm/system.h @@ -32,6 +32,9 @@ extern asmlinkage void *resume(void *last, void *next, void *next_ti); struct task_struct; +extern unsigned int ll_bit; +extern struct task_struct *ll_task; + #ifdef CONFIG_MIPS_MT_FPAFF /* @@ -63,11 +66,18 @@ do { \ #define __mips_mt_fpaff_switch_to(prev) do { (void) (prev); } while (0) #endif +#define __clear_software_ll_bit() \ +do { \ + if (!__builtin_constant_p(cpu_has_llsc) || !cpu_has_llsc) \ + ll_bit = 0; \ +} while (0) + #define switch_to(prev, next, last) \ do { \ __mips_mt_fpaff_switch_to(prev); \ if (cpu_has_dsp) \ __save_dsp(prev); \ + __clear_software_ll_bit(); \ (last) = resume(prev, next, task_thread_info(next)); \ } while (0) @@ -84,7 +94,7 @@ static inline unsigned long __xchg_u32(volatile int * m, unsigned int val) { __u32 retval; - if (cpu_has_llsc && R10000_LLSC_WAR) { + if (kernel_uses_llsc && R10000_LLSC_WAR) { unsigned long dummy; __asm__ __volatile__( @@ -99,7 +109,7 @@ static inline unsigned long __xchg_u32(volatile int * m, unsigned int val) : "=&r" (retval), "=m" (*m), "=&r" (dummy) : "R" (*m), "Jr" (val) : "memory"); - } else if (cpu_has_llsc) { + } else if (kernel_uses_llsc) { unsigned long dummy; __asm__ __volatile__( @@ -136,7 +146,7 @@ static inline __u64 __xchg_u64(volatile __u64 * m, __u64 val) { __u64 retval; - if (cpu_has_llsc && R10000_LLSC_WAR) { + if (kernel_uses_llsc && R10000_LLSC_WAR) { unsigned long dummy; __asm__ __volatile__( @@ -149,7 +159,7 @@ static inline __u64 __xchg_u64(volatile __u64 * m, __u64 val) : "=&r" (retval), "=m" (*m), "=&r" (dummy) : "R" (*m), "Jr" (val) : "memory"); - } else if (cpu_has_llsc) { + } else if (kernel_uses_llsc) { unsigned long dummy; __asm__ __volatile__( diff --git a/arch/mips/include/asm/unistd.h b/arch/mips/include/asm/unistd.h index e753a777949..8c9dfa9e901 100644 --- a/arch/mips/include/asm/unistd.h +++ b/arch/mips/include/asm/unistd.h @@ -353,7 +353,7 @@ #define __NR_preadv (__NR_Linux + 330) #define __NR_pwritev (__NR_Linux + 331) #define __NR_rt_tgsigqueueinfo (__NR_Linux + 332) -#define __NR_perf_counter_open (__NR_Linux + 333) +#define __NR_perf_event_open (__NR_Linux + 333) #define __NR_accept4 (__NR_Linux + 334) /* @@ -664,7 +664,7 @@ #define __NR_preadv (__NR_Linux + 289) #define __NR_pwritev (__NR_Linux + 290) #define __NR_rt_tgsigqueueinfo (__NR_Linux + 291) -#define __NR_perf_counter_open (__NR_Linux + 292) +#define __NR_perf_event_open (__NR_Linux + 292) #define __NR_accept4 (__NR_Linux + 293) /* @@ -979,7 +979,7 @@ #define __NR_preadv (__NR_Linux + 293) #define __NR_pwritev (__NR_Linux + 294) #define __NR_rt_tgsigqueueinfo (__NR_Linux + 295) -#define __NR_perf_counter_open (__NR_Linux + 296) +#define __NR_perf_event_open (__NR_Linux + 296) #define __NR_accept4 (__NR_Linux + 297) /* diff --git a/arch/mips/kernel/asm-offsets.c b/arch/mips/kernel/asm-offsets.c index 8d006ec6567..2c1e1d02338 100644 --- a/arch/mips/kernel/asm-offsets.c +++ b/arch/mips/kernel/asm-offsets.c @@ -183,9 +183,6 @@ void output_mm_defines(void) OFFSET(MM_PGD, mm_struct, pgd); OFFSET(MM_CONTEXT, mm_struct, context); BLANK(); - DEFINE(_PAGE_SIZE, PAGE_SIZE); - DEFINE(_PAGE_SHIFT, PAGE_SHIFT); - BLANK(); DEFINE(_PGD_T_SIZE, sizeof(pgd_t)); DEFINE(_PMD_T_SIZE, sizeof(pmd_t)); DEFINE(_PTE_T_SIZE, sizeof(pte_t)); diff --git a/arch/mips/kernel/cpu-bugs64.c b/arch/mips/kernel/cpu-bugs64.c index 02b7713cf71..408d0a07b3a 100644 --- a/arch/mips/kernel/cpu-bugs64.c +++ b/arch/mips/kernel/cpu-bugs64.c @@ -167,7 +167,7 @@ static inline void check_mult_sh(void) panic(bug64hit, !R4000_WAR ? r4kwar : nowar); } -static volatile int daddi_ov __cpuinitdata = 0; +static volatile int daddi_ov __cpuinitdata; asmlinkage void __init do_daddi_ov(struct pt_regs *regs) { diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index 1abe9905c9c..f709657e4dc 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -31,7 +31,7 @@ * The wait instruction stops the pipeline and reduces the power consumption of * the CPU very much. */ -void (*cpu_wait)(void) = NULL; +void (*cpu_wait)(void); static void r3081_wait(void) { @@ -91,16 +91,13 @@ static void rm7k_wait_irqoff(void) local_irq_enable(); } -/* The Au1xxx wait is available only if using 32khz counter or - * external timer source, but specifically not CP0 Counter. */ -int allow_au1k_wait; - +/* + * The Au1xxx wait is available only if using 32khz counter or + * external timer source, but specifically not CP0 Counter. + * alchemy/common/time.c may override cpu_wait! + */ static void au1k_wait(void) { - if (!allow_au1k_wait) - return; - - /* using the wait instruction makes CP0 counter unusable */ __asm__(" .set mips3 \n" " cache 0x14, 0(%0) \n" " cache 0x14, 32(%0) \n" @@ -115,7 +112,7 @@ static void au1k_wait(void) : : "r" (au1k_wait)); } -static int __initdata nowait = 0; +static int __initdata nowait; static int __init wait_disable(char *s) { @@ -159,6 +156,9 @@ void __init check_wait(void) case CPU_25KF: case CPU_PR4450: case CPU_BCM3302: + case CPU_BCM6338: + case CPU_BCM6348: + case CPU_BCM6358: case CPU_CAVIUM_OCTEON: cpu_wait = r4k_wait; break; @@ -857,6 +857,7 @@ static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu) decode_configs(c); switch (c->processor_id & 0xff00) { case PRID_IMP_BCM3302: + /* same as PRID_IMP_BCM6338 */ c->cputype = CPU_BCM3302; __cpu_name[cpu] = "Broadcom BCM3302"; break; @@ -864,6 +865,25 @@ static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu) c->cputype = CPU_BCM4710; __cpu_name[cpu] = "Broadcom BCM4710"; break; + case PRID_IMP_BCM6345: + c->cputype = CPU_BCM6345; + __cpu_name[cpu] = "Broadcom BCM6345"; + break; + case PRID_IMP_BCM6348: + c->cputype = CPU_BCM6348; + __cpu_name[cpu] = "Broadcom BCM6348"; + break; + case PRID_IMP_BCM4350: + switch (c->processor_id & 0xf0) { + case PRID_REV_BCM6358: + c->cputype = CPU_BCM6358; + __cpu_name[cpu] = "Broadcom BCM6358"; + break; + default: + c->cputype = CPU_UNKNOWN; + break; + } + break; } } diff --git a/arch/mips/kernel/init_task.c b/arch/mips/kernel/init_task.c index 5b457a40c78..6d6ca530589 100644 --- a/arch/mips/kernel/init_task.c +++ b/arch/mips/kernel/init_task.c @@ -21,9 +21,8 @@ static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand); * * The things we do for performance.. */ -union thread_union init_thread_union - __attribute__((__section__(".data.init_task"), - __aligned__(THREAD_SIZE))) = +union thread_union init_thread_union __init_task_data + __attribute__((__aligned__(THREAD_SIZE))) = { INIT_THREAD_INFO(init_task) }; /* diff --git a/arch/mips/kernel/kspd.c b/arch/mips/kernel/kspd.c index fd6e5122403..f2397f00db4 100644 --- a/arch/mips/kernel/kspd.c +++ b/arch/mips/kernel/kspd.c @@ -31,7 +31,7 @@ #include <asm/rtlx.h> #include <asm/kspd.h> -static struct workqueue_struct *workqueue = NULL; +static struct workqueue_struct *workqueue; static struct work_struct work; extern unsigned long cpu_khz; @@ -58,7 +58,7 @@ struct mtsp_syscall_generic { }; static struct list_head kspd_notifylist; -static int sp_stopping = 0; +static int sp_stopping; /* these should match with those in the SDE kit */ #define MTSP_SYSCALL_BASE 0 @@ -328,7 +328,7 @@ static void sp_cleanup(void) sys_chdir("/"); } -static int channel_open = 0; +static int channel_open; /* the work handler */ static void sp_work(struct work_struct *unused) diff --git a/arch/mips/kernel/mips-mt-fpaff.c b/arch/mips/kernel/mips-mt-fpaff.c index 42461310b18..cbc6182b006 100644 --- a/arch/mips/kernel/mips-mt-fpaff.c +++ b/arch/mips/kernel/mips-mt-fpaff.c @@ -18,7 +18,7 @@ cpumask_t mt_fpu_cpumask; static int fpaff_threshold = -1; -unsigned long mt_fpemul_threshold = 0; +unsigned long mt_fpemul_threshold; /* * Replacement functions for the sys_sched_setaffinity() and diff --git a/arch/mips/kernel/mips-mt.c b/arch/mips/kernel/mips-mt.c index d01665a453f..b2259e7cd82 100644 --- a/arch/mips/kernel/mips-mt.c +++ b/arch/mips/kernel/mips-mt.c @@ -125,10 +125,10 @@ void mips_mt_regdump(unsigned long mvpctl) local_irq_restore(flags); } -static int mt_opt_norps = 0; +static int mt_opt_norps; static int mt_opt_rpsctl = -1; static int mt_opt_nblsu = -1; -static int mt_opt_forceconfig7 = 0; +static int mt_opt_forceconfig7; static int mt_opt_config7 = -1; static int __init rps_disable(char *s) @@ -161,8 +161,8 @@ static int __init config7_set(char *str) __setup("config7=", config7_set); /* Experimental cache flush control parameters that should go away some day */ -int mt_protiflush = 0; -int mt_protdflush = 0; +int mt_protiflush; +int mt_protdflush; int mt_n_iflushes = 1; int mt_n_dflushes = 1; @@ -194,7 +194,7 @@ static int __init ndflush(char *s) } __setup("ndflush=", ndflush); -static unsigned int itc_base = 0; +static unsigned int itc_base; static int __init set_itc_base(char *str) { diff --git a/arch/mips/kernel/octeon_switch.S b/arch/mips/kernel/octeon_switch.S index d52389672b0..3952b8323ef 100644 --- a/arch/mips/kernel/octeon_switch.S +++ b/arch/mips/kernel/octeon_switch.S @@ -36,9 +36,6 @@ .align 7 LEAF(resume) .set arch=octeon -#ifndef CONFIG_CPU_HAS_LLSC - sw zero, ll_bit -#endif mfc0 t1, CP0_STATUS LONG_S t1, THREAD_STATUS(a0) cpu_save_nonscratch a0 diff --git a/arch/mips/kernel/r2300_switch.S b/arch/mips/kernel/r2300_switch.S index 656bde2e11b..698414b7a25 100644 --- a/arch/mips/kernel/r2300_switch.S +++ b/arch/mips/kernel/r2300_switch.S @@ -46,9 +46,6 @@ * struct thread_info *next_ti) ) */ LEAF(resume) -#ifndef CONFIG_CPU_HAS_LLSC - sw zero, ll_bit -#endif mfc0 t1, CP0_STATUS sw t1, THREAD_STATUS(a0) cpu_save_nonscratch a0 diff --git a/arch/mips/kernel/r4k_switch.S b/arch/mips/kernel/r4k_switch.S index d9bfae53c43..8893ee1a236 100644 --- a/arch/mips/kernel/r4k_switch.S +++ b/arch/mips/kernel/r4k_switch.S @@ -45,9 +45,6 @@ */ .align 5 LEAF(resume) -#ifndef CONFIG_CPU_HAS_LLSC - sw zero, ll_bit -#endif mfc0 t1, CP0_STATUS LONG_S t1, THREAD_STATUS(a0) cpu_save_nonscratch a0 diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c index 4ce93aa7b37..a10ebfdc28a 100644 --- a/arch/mips/kernel/rtlx.c +++ b/arch/mips/kernel/rtlx.c @@ -57,7 +57,7 @@ static struct chan_waitqueues { } channel_wqs[RTLX_CHANNELS]; static struct vpe_notifications notify; -static int sp_stopping = 0; +static int sp_stopping; extern void *vpe_get_shared(int index); diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S index b5708212353..fd2a9bb620d 100644 --- a/arch/mips/kernel/scall32-o32.S +++ b/arch/mips/kernel/scall32-o32.S @@ -187,78 +187,6 @@ illegal_syscall: j o32_syscall_exit END(handle_sys) - LEAF(mips_atomic_set) - andi v0, a1, 3 # must be word aligned - bnez v0, bad_alignment - - lw v1, TI_ADDR_LIMIT($28) # in legal address range? - addiu a0, a1, 4 - or a0, a0, a1 - and a0, a0, v1 - bltz a0, bad_address - -#ifdef CONFIG_CPU_HAS_LLSC - /* Ok, this is the ll/sc case. World is sane :-) */ -1: ll v0, (a1) - move a0, a2 -2: sc a0, (a1) -#if R10000_LLSC_WAR - beqzl a0, 1b -#else - beqz a0, 1b -#endif - - .section __ex_table,"a" - PTR 1b, bad_stack - PTR 2b, bad_stack - .previous -#else - sw a1, 16(sp) - sw a2, 20(sp) - - move a0, sp - move a2, a1 - li a1, 1 - jal do_page_fault - - lw a1, 16(sp) - lw a2, 20(sp) - - /* - * At this point the page should be readable and writable unless - * there was no more memory available. - */ -1: lw v0, (a1) -2: sw a2, (a1) - - .section __ex_table,"a" - PTR 1b, no_mem - PTR 2b, no_mem - .previous -#endif - - sw zero, PT_R7(sp) # success - sw v0, PT_R2(sp) # result - - j o32_syscall_exit # continue like a normal syscall - -no_mem: li v0, -ENOMEM - jr ra - -bad_address: - li v0, -EFAULT - jr ra - -bad_alignment: - li v0, -EINVAL - jr ra - END(mips_atomic_set) - - LEAF(sys_sysmips) - beq a0, MIPS_ATOMIC_SET, mips_atomic_set - j _sys_sysmips - END(sys_sysmips) - LEAF(sys_syscall) subu t0, a0, __NR_O32_Linux # check syscall number sltiu v0, t0, __NR_O32_Linux_syscalls + 1 @@ -653,7 +581,7 @@ einval: li v0, -ENOSYS sys sys_preadv 6 /* 4330 */ sys sys_pwritev 6 sys sys_rt_tgsigqueueinfo 4 - sys sys_perf_counter_open 5 + sys sys_perf_event_open 5 sys sys_accept4 4 .endm diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S index 3d866f24e06..18bf7f32c5e 100644 --- a/arch/mips/kernel/scall64-64.S +++ b/arch/mips/kernel/scall64-64.S @@ -124,78 +124,6 @@ illegal_syscall: j n64_syscall_exit END(handle_sys64) - LEAF(mips_atomic_set) - andi v0, a1, 3 # must be word aligned - bnez v0, bad_alignment - - LONG_L v1, TI_ADDR_LIMIT($28) # in legal address range? - LONG_ADDIU a0, a1, 4 - or a0, a0, a1 - and a0, a0, v1 - bltz a0, bad_address - -#ifdef CONFIG_CPU_HAS_LLSC - /* Ok, this is the ll/sc case. World is sane :-) */ -1: ll v0, (a1) - move a0, a2 -2: sc a0, (a1) -#if R10000_LLSC_WAR - beqzl a0, 1b -#else - beqz a0, 1b -#endif - - .section __ex_table,"a" - PTR 1b, bad_stack - PTR 2b, bad_stack - .previous -#else - sw a1, 16(sp) - sw a2, 20(sp) - - move a0, sp - move a2, a1 - li a1, 1 - jal do_page_fault - - lw a1, 16(sp) - lw a2, 20(sp) - - /* - * At this point the page should be readable and writable unless - * there was no more memory available. - */ -1: lw v0, (a1) -2: sw a2, (a1) - - .section __ex_table,"a" - PTR 1b, no_mem - PTR 2b, no_mem - .previous -#endif - - sd zero, PT_R7(sp) # success - sd v0, PT_R2(sp) # result - - j n64_syscall_exit # continue like a normal syscall - -no_mem: li v0, -ENOMEM - jr ra - -bad_address: - li v0, -EFAULT - jr ra - -bad_alignment: - li v0, -EINVAL - jr ra - END(mips_atomic_set) - - LEAF(sys_sysmips) - beq a0, MIPS_ATOMIC_SET, mips_atomic_set - j _sys_sysmips - END(sys_sysmips) - .align 3 sys_call_table: PTR sys_read /* 5000 */ @@ -490,6 +418,6 @@ sys_call_table: PTR sys_preadv PTR sys_pwritev /* 5390 */ PTR sys_rt_tgsigqueueinfo - PTR sys_perf_counter_open + PTR sys_perf_event_open PTR sys_accept4 .size sys_call_table,.-sys_call_table diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S index 1a6ae124635..6ebc0797669 100644 --- a/arch/mips/kernel/scall64-n32.S +++ b/arch/mips/kernel/scall64-n32.S @@ -416,6 +416,6 @@ EXPORT(sysn32_call_table) PTR sys_preadv PTR sys_pwritev PTR compat_sys_rt_tgsigqueueinfo /* 5295 */ - PTR sys_perf_counter_open + PTR sys_perf_event_open PTR sys_accept4 .size sysn32_call_table,.-sysn32_call_table diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S index cd31087a651..9bbf9775e0b 100644 --- a/arch/mips/kernel/scall64-o32.S +++ b/arch/mips/kernel/scall64-o32.S @@ -536,6 +536,6 @@ sys_call_table: PTR compat_sys_preadv /* 4330 */ PTR compat_sys_pwritev PTR compat_sys_rt_tgsigqueueinfo - PTR sys_perf_counter_open + PTR sys_perf_event_open PTR sys_accept4 .size sys_call_table,.-sys_call_table diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index 2950b97253b..2b290d70083 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -441,7 +441,7 @@ static void __init bootmem_init(void) * initialization hook for anything else was introduced. */ -static int usermem __initdata = 0; +static int usermem __initdata; static int __init early_parse_mem(char *p) { diff --git a/arch/mips/kernel/smp-cmp.c b/arch/mips/kernel/smp-cmp.c index ad0ff5dc4d5..cc81771b882 100644 --- a/arch/mips/kernel/smp-cmp.c +++ b/arch/mips/kernel/smp-cmp.c @@ -80,11 +80,11 @@ void cmp_send_ipi_single(int cpu, unsigned int action) local_irq_restore(flags); } -static void cmp_send_ipi_mask(cpumask_t mask, unsigned int action) +static void cmp_send_ipi_mask(const struct cpumask *mask, unsigned int action) { unsigned int i; - for_each_cpu_mask(i, mask) + for_each_cpu(i, mask) cmp_send_ipi_single(i, action); } @@ -171,7 +171,7 @@ void __init cmp_smp_setup(void) for (i = 1; i < NR_CPUS; i++) { if (amon_cpu_avail(i)) { - cpu_set(i, cpu_possible_map); + set_cpu_possible(i, true); __cpu_number_map[i] = ++ncpu; __cpu_logical_map[ncpu] = i; } diff --git a/arch/mips/kernel/smp-mt.c b/arch/mips/kernel/smp-mt.c index 6f7ee5ac46e..43e7cdc5ded 100644 --- a/arch/mips/kernel/smp-mt.c +++ b/arch/mips/kernel/smp-mt.c @@ -70,7 +70,7 @@ static unsigned int __init smvp_vpe_init(unsigned int tc, unsigned int mvpconf0, write_vpe_c0_vpeconf0(tmp); /* Record this as available CPU */ - cpu_set(tc, cpu_possible_map); + set_cpu_possible(tc, true); __cpu_number_map[tc] = ++ncpu; __cpu_logical_map[ncpu] = tc; } @@ -141,11 +141,11 @@ static void vsmp_send_ipi_single(int cpu, unsigned int action) local_irq_restore(flags); } -static void vsmp_send_ipi_mask(cpumask_t mask, unsigned int action) +static void vsmp_send_ipi_mask(const struct cpumask *mask, unsigned int action) { unsigned int i; - for_each_cpu_mask(i, mask) + for_each_cpu(i, mask) vsmp_send_ipi_single(i, action); } diff --git a/arch/mips/kernel/smp-up.c b/arch/mips/kernel/smp-up.c index 2508d55d68f..00500fea275 100644 --- a/arch/mips/kernel/smp-up.c +++ b/arch/mips/kernel/smp-up.c @@ -18,7 +18,8 @@ static void up_send_ipi_single(int cpu, unsigned int action) panic(KERN_ERR "%s called", __func__); } -static inline void up_send_ipi_mask(cpumask_t mask, unsigned int action) +static inline void up_send_ipi_mask(const struct cpumask *mask, + unsigned int action) { panic(KERN_ERR "%s called", __func__); } diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c index bc7d9b05e2f..4eb106c6a3e 100644 --- a/arch/mips/kernel/smp.c +++ b/arch/mips/kernel/smp.c @@ -32,6 +32,7 @@ #include <linux/cpumask.h> #include <linux/cpu.h> #include <linux/err.h> +#include <linux/smp.h> #include <asm/atomic.h> #include <asm/cpu.h> @@ -49,8 +50,6 @@ volatile cpumask_t cpu_callin_map; /* Bitmask of started secondaries */ int __cpu_number_map[NR_CPUS]; /* Map physical to logical */ int __cpu_logical_map[NR_CPUS]; /* Map logical to physical */ -extern void cpu_idle(void); - /* Number of TCs (or siblings in Intel speak) per CPU core */ int smp_num_siblings = 1; EXPORT_SYMBOL(smp_num_siblings); @@ -129,7 +128,7 @@ asmlinkage __cpuinit void start_secondary(void) cpu_idle(); } -void arch_send_call_function_ipi(cpumask_t mask) +void arch_send_call_function_ipi_mask(const struct cpumask *mask) { mp_ops->send_ipi_mask(mask, SMP_CALL_FUNCTION); } @@ -184,15 +183,15 @@ void __init smp_prepare_cpus(unsigned int max_cpus) mp_ops->prepare_cpus(max_cpus); set_cpu_sibling_map(0); #ifndef CONFIG_HOTPLUG_CPU - cpu_present_map = cpu_possible_map; + init_cpu_present(&cpu_possible_map); #endif } /* preload SMP state for boot cpu */ void __devinit smp_prepare_boot_cpu(void) { - cpu_set(0, cpu_possible_map); - cpu_set(0, cpu_online_map); + set_cpu_possible(0, true); + set_cpu_online(0, true); cpu_set(0, cpu_callin_map); } diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c index c16bb6d6c25..67153a0dc26 100644 --- a/arch/mips/kernel/smtc.c +++ b/arch/mips/kernel/smtc.c @@ -95,14 +95,14 @@ void init_smtc_stats(void); /* Global SMTC Status */ -unsigned int smtc_status = 0; +unsigned int smtc_status; /* Boot command line configuration overrides */ static int vpe0limit; -static int ipibuffers = 0; -static int nostlb = 0; -static int asidmask = 0; +static int ipibuffers; +static int nostlb; +static int asidmask; unsigned long smtc_asid_mask = 0xff; static int __init vpe0tcs(char *str) @@ -151,7 +151,7 @@ __setup("asidmask=", asidmask_set); #ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG -static int hang_trig = 0; +static int hang_trig; static int __init hangtrig_enable(char *s) { @@ -305,7 +305,7 @@ int __init smtc_build_cpu_map(int start_cpu_slot) */ ntcs = ((read_c0_mvpconf0() & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT) + 1; for (i=start_cpu_slot; i<NR_CPUS && i<ntcs; i++) { - cpu_set(i, cpu_possible_map); + set_cpu_possible(i, true); __cpu_number_map[i] = i; __cpu_logical_map[i] = i; } @@ -525,8 +525,8 @@ void smtc_prepare_cpus(int cpus) * Pull any physically present but unused TCs out of circulation. */ while (tc < (((val & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT) + 1)) { - cpu_clear(tc, cpu_possible_map); - cpu_clear(tc, cpu_present_map); + set_cpu_possible(tc, false); + set_cpu_present(tc, false); tc++; } diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c index 8cf38464404..3fe1fcfa2e7 100644 --- a/arch/mips/kernel/syscall.c +++ b/arch/mips/kernel/syscall.c @@ -28,7 +28,9 @@ #include <linux/compiler.h> #include <linux/module.h> #include <linux/ipc.h> +#include <linux/uaccess.h> +#include <asm/asm.h> #include <asm/branch.h> #include <asm/cachectl.h> #include <asm/cacheflush.h> @@ -290,12 +292,116 @@ SYSCALL_DEFINE1(set_thread_area, unsigned long, addr) return 0; } -asmlinkage int _sys_sysmips(long cmd, long arg1, long arg2, long arg3) +static inline int mips_atomic_set(struct pt_regs *regs, + unsigned long addr, unsigned long new) { + unsigned long old, tmp; + unsigned int err; + + if (unlikely(addr & 3)) + return -EINVAL; + + if (unlikely(!access_ok(VERIFY_WRITE, addr, 4))) + return -EINVAL; + + if (cpu_has_llsc && R10000_LLSC_WAR) { + __asm__ __volatile__ ( + " li %[err], 0 \n" + "1: ll %[old], (%[addr]) \n" + " move %[tmp], %[new] \n" + "2: sc %[tmp], (%[addr]) \n" + " beqzl %[tmp], 1b \n" + "3: \n" + " .section .fixup,\"ax\" \n" + "4: li %[err], %[efault] \n" + " j 3b \n" + " .previous \n" + " .section __ex_table,\"a\" \n" + " "STR(PTR)" 1b, 4b \n" + " "STR(PTR)" 2b, 4b \n" + " .previous \n" + : [old] "=&r" (old), + [err] "=&r" (err), + [tmp] "=&r" (tmp) + : [addr] "r" (addr), + [new] "r" (new), + [efault] "i" (-EFAULT) + : "memory"); + } else if (cpu_has_llsc) { + __asm__ __volatile__ ( + " li %[err], 0 \n" + "1: ll %[old], (%[addr]) \n" + " move %[tmp], %[new] \n" + "2: sc %[tmp], (%[addr]) \n" + " bnez %[tmp], 4f \n" + "3: \n" + " .subsection 2 \n" + "4: b 1b \n" + " .previous \n" + " \n" + " .section .fixup,\"ax\" \n" + "5: li %[err], %[efault] \n" + " j 3b \n" + " .previous \n" + " .section __ex_table,\"a\" \n" + " "STR(PTR)" 1b, 5b \n" + " "STR(PTR)" 2b, 5b \n" + " .previous \n" + : [old] "=&r" (old), + [err] "=&r" (err), + [tmp] "=&r" (tmp) + : [addr] "r" (addr), + [new] "r" (new), + [efault] "i" (-EFAULT) + : "memory"); + } else { + do { + preempt_disable(); + ll_bit = 1; + ll_task = current; + preempt_enable(); + + err = __get_user(old, (unsigned int *) addr); + err |= __put_user(new, (unsigned int *) addr); + if (err) + break; + rmb(); + } while (!ll_bit); + } + + if (unlikely(err)) + return err; + + regs->regs[2] = old; + regs->regs[7] = 0; /* No error */ + + /* + * Don't let your children do this ... + */ + __asm__ __volatile__( + " move $29, %0 \n" + " j syscall_exit \n" + : /* no outputs */ + : "r" (regs)); + + /* unreached. Honestly. */ + while (1); +} + +save_static_function(sys_sysmips); +static int __used noinline +_sys_sysmips(nabi_no_regargs struct pt_regs regs) +{ + long cmd, arg1, arg2, arg3; + + cmd = regs.regs[4]; + arg1 = regs.regs[5]; + arg2 = regs.regs[6]; + arg3 = regs.regs[7]; + switch (cmd) { case MIPS_ATOMIC_SET: - printk(KERN_CRIT "How did I get here?\n"); - return -EINVAL; + return mips_atomic_set(®s, arg1, arg2); case MIPS_FIXADE: if (arg1 & ~3) diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 08f1edf355e..0a18b4c62af 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -466,9 +466,8 @@ asmlinkage void do_be(struct pt_regs *regs) * The ll_bit is cleared by r*_switch.S */ -unsigned long ll_bit; - -static struct task_struct *ll_task = NULL; +unsigned int ll_bit; +struct task_struct *ll_task; static inline int simulate_ll(struct pt_regs *regs, unsigned int opcode) { diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S index 58738c8d754..9bf0e3df7c5 100644 --- a/arch/mips/kernel/vmlinux.lds.S +++ b/arch/mips/kernel/vmlinux.lds.S @@ -1,4 +1,5 @@ #include <asm/asm-offsets.h> +#include <asm/page.h> #include <asm-generic/vmlinux.lds.h> #undef mips @@ -9,7 +10,16 @@ PHDRS { text PT_LOAD FLAGS(7); /* RWX */ note PT_NOTE FLAGS(4); /* R__ */ } -jiffies = JIFFIES; + +ifdef CONFIG_32BIT + ifdef CONFIG_CPU_LITTLE_ENDIAN + jiffies = jiffies_64; + else + jiffies = jiffies_64 + 4; + endif +else + jiffies = jiffies_64; +endif SECTIONS { @@ -28,7 +38,7 @@ SECTIONS /* . = 0xa800000000300000; */ . = 0xffffffff80300000; #endif - . = LOADADDR; + . = VMLINUX_LOAD_ADDRESS; /* read-only */ _text = .; /* Text and read-only data */ .text : { @@ -42,13 +52,7 @@ SECTIONS } :text = 0 _etext = .; /* End of text section */ - /* Exception table */ - . = ALIGN(16); - __ex_table : { - __start___ex_table = .; - *(__ex_table) - __stop___ex_table = .; - } + EXCEPTION_TABLE(16) /* Exception table for data bus errors */ __dbe_table : { @@ -65,20 +69,10 @@ SECTIONS /* writeable */ .data : { /* Data */ . = . + DATAOFFSET; /* for CONFIG_MAPPED_KERNEL */ - /* - * This ALIGN is needed as a workaround for a bug a - * gcc bug upto 4.1 which limits the maximum alignment - * to at most 32kB and results in the following - * warning: - * - * CC arch/mips/kernel/init_task.o - * arch/mips/kernel/init_task.c:30: warning: alignment - * of ‘init_thread_union’ is greater than maximum - * object file alignment. Using 32768 - */ - . = ALIGN(_PAGE_SIZE); - *(.data.init_task) + INIT_TASK_DATA(PAGE_SIZE) + NOSAVE_DATA + CACHELINE_ALIGNED_DATA(1 << CONFIG_MIPS_L1_CACHE_SHIFT) DATA_DATA CONSTRUCTORS } @@ -95,51 +89,13 @@ SECTIONS .sdata : { *(.sdata) } - - . = ALIGN(_PAGE_SIZE); - .data_nosave : { - __nosave_begin = .; - *(.data.nosave) - } - . = ALIGN(_PAGE_SIZE); - __nosave_end = .; - - . = ALIGN(1 << CONFIG_MIPS_L1_CACHE_SHIFT); - .data.cacheline_aligned : { - *(.data.cacheline_aligned) - } _edata = .; /* End of data section */ /* will be freed after init */ - . = ALIGN(_PAGE_SIZE); /* Init code and data */ + . = ALIGN(PAGE_SIZE); /* Init code and data */ __init_begin = .; - .init.text : { - _sinittext = .; - INIT_TEXT - _einittext = .; - } - .init.data : { - INIT_DATA - } - . = ALIGN(16); - .init.setup : { - __setup_start = .; - *(.init.setup) - __setup_end = .; - } - - .initcall.init : { - __initcall_start = .; - INITCALLS - __initcall_end = .; - } - - .con_initcall.init : { - __con_initcall_start = .; - *(.con_initcall.init) - __con_initcall_end = .; - } - SECURITY_INIT + INIT_TEXT_SECTION(PAGE_SIZE) + INIT_DATA_SECTION(16) /* .exit.text is discarded at runtime, not link time, to deal with * references from .rodata @@ -150,43 +106,16 @@ SECTIONS .exit.data : { EXIT_DATA } -#if defined(CONFIG_BLK_DEV_INITRD) - . = ALIGN(_PAGE_SIZE); - .init.ramfs : { - __initramfs_start = .; - *(.init.ramfs) - __initramfs_end = .; - } -#endif - PERCPU(_PAGE_SIZE) - . = ALIGN(_PAGE_SIZE); + + PERCPU(PAGE_SIZE) + . = ALIGN(PAGE_SIZE); __init_end = .; /* freed after init ends here */ - __bss_start = .; /* BSS */ - .sbss : { - *(.sbss) - *(.scommon) - } - .bss : { - *(.bss) - *(COMMON) - } - __bss_stop = .; + BSS_SECTION(0, 0, 0) _end = . ; - /* Sections to be discarded */ - /DISCARD/ : { - *(.exitcall.exit) - - /* ABI crap starts here */ - *(.MIPS.options) - *(.options) - *(.pdr) - *(.reginfo) - } - /* These mark the ABI of the kernel for debuggers. */ .mdebug.abi32 : { KEEP(*(.mdebug.abi32)) @@ -212,4 +141,14 @@ SECTIONS *(.gptab.bss) *(.gptab.sbss) } + + /* Sections to be discarded */ + DISCARDS + /DISCARD/ : { + /* ABI crap starts here */ + *(.MIPS.options) + *(.options) + *(.pdr) + *(.reginfo) + } } diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c index 9a1ab7e87fd..eb6c4c5b7fb 100644 --- a/arch/mips/kernel/vpe.c +++ b/arch/mips/kernel/vpe.c @@ -74,7 +74,7 @@ static const int minor = 1; /* fixed for now */ #ifdef CONFIG_MIPS_APSP_KSPD static struct kspd_notifications kspd_events; -static int kspd_events_reqd = 0; +static int kspd_events_reqd; #endif /* grab the likely amount of memory we will need. */ diff --git a/arch/mips/lasat/ds1603.c b/arch/mips/lasat/ds1603.c index 52cb1436a12..c6fd96ff118 100644 --- a/arch/mips/lasat/ds1603.c +++ b/arch/mips/lasat/ds1603.c @@ -135,7 +135,7 @@ static void rtc_end_op(void) lasat_ndelay(1000); } -unsigned long read_persistent_clock(void) +void read_persistent_clock(struct timespec *ts) { unsigned long word; unsigned long flags; @@ -147,7 +147,8 @@ unsigned long read_persistent_clock(void) rtc_end_op(); spin_unlock_irqrestore(&rtc_lock, flags); - return word; + ts->tv_sec = word; + ts->tv_nsec = 0; } int rtc_mips_set_mmss(unsigned long time) diff --git a/arch/mips/lasat/sysctl.c b/arch/mips/lasat/sysctl.c index 8f88886feb1..b3deed8db61 100644 --- a/arch/mips/lasat/sysctl.c +++ b/arch/mips/lasat/sysctl.c @@ -56,12 +56,12 @@ int sysctl_lasatstring(ctl_table *table, /* And the same for proc */ -int proc_dolasatstring(ctl_table *table, int write, struct file *filp, +int proc_dolasatstring(ctl_table *table, int write, void *buffer, size_t *lenp, loff_t *ppos) { int r; - r = proc_dostring(table, write, filp, buffer, lenp, ppos); + r = proc_dostring(table, write, buffer, lenp, ppos); if ((!write) || r) return r; @@ -71,12 +71,12 @@ int proc_dolasatstring(ctl_table *table, int write, struct file *filp, } /* proc function to write EEPROM after changing int entry */ -int proc_dolasatint(ctl_table *table, int write, struct file *filp, +int proc_dolasatint(ctl_table *table, int write, void *buffer, size_t *lenp, loff_t *ppos) { int r; - r = proc_dointvec(table, write, filp, buffer, lenp, ppos); + r = proc_dointvec(table, write, buffer, lenp, ppos); if ((!write) || r) return r; @@ -89,18 +89,20 @@ int proc_dolasatint(ctl_table *table, int write, struct file *filp, static int rtctmp; /* proc function to read/write RealTime Clock */ -int proc_dolasatrtc(ctl_table *table, int write, struct file *filp, +int proc_dolasatrtc(ctl_table *table, int write, void *buffer, size_t *lenp, loff_t *ppos) { + struct timespec ts; int r; if (!write) { - rtctmp = read_persistent_clock(); + read_persistent_clock(&ts); + rtctmp = ts.tv_sec; /* check for time < 0 and set to 0 */ if (rtctmp < 0) rtctmp = 0; } - r = proc_dointvec(table, write, filp, buffer, lenp, ppos); + r = proc_dointvec(table, write, buffer, lenp, ppos); if (r) return r; @@ -134,9 +136,11 @@ int sysctl_lasat_rtc(ctl_table *table, void *oldval, size_t *oldlenp, void *newval, size_t newlen) { + struct timespec ts; int r; - rtctmp = read_persistent_clock(); + read_persistent_clock(&ts); + rtctmp = ts.tv_sec; if (rtctmp < 0) rtctmp = 0; r = sysctl_intvec(table, oldval, oldlenp, newval, newlen); @@ -150,7 +154,7 @@ int sysctl_lasat_rtc(ctl_table *table, #endif #ifdef CONFIG_INET -int proc_lasat_ip(ctl_table *table, int write, struct file *filp, +int proc_lasat_ip(ctl_table *table, int write, void *buffer, size_t *lenp, loff_t *ppos) { unsigned int ip; @@ -227,12 +231,12 @@ static int sysctl_lasat_prid(ctl_table *table, return 0; } -int proc_lasat_prid(ctl_table *table, int write, struct file *filp, +int proc_lasat_prid(ctl_table *table, int write, void *buffer, size_t *lenp, loff_t *ppos) { int r; - r = proc_dointvec(table, write, filp, buffer, lenp, ppos); + r = proc_dointvec(table, write, buffer, lenp, ppos); if (r < 0) return r; if (write) { diff --git a/arch/mips/lemote/lm2e/Makefile b/arch/mips/lemote/lm2e/Makefile deleted file mode 100644 index d34671d1b89..00000000000 --- a/arch/mips/lemote/lm2e/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# -# Makefile for Lemote Fulong mini-PC board. -# - -obj-y += setup.o prom.o reset.o irq.o pci.o bonito-irq.o dbg_io.o mem.o - -EXTRA_CFLAGS += -Werror diff --git a/arch/mips/lemote/lm2e/dbg_io.c b/arch/mips/lemote/lm2e/dbg_io.c deleted file mode 100644 index 6c95da3ca76..00000000000 --- a/arch/mips/lemote/lm2e/dbg_io.c +++ /dev/null @@ -1,146 +0,0 @@ -/* - * Copyright 2001 MontaVista Software Inc. - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - * Copyright (C) 2000, 2001 Ralf Baechle (ralf@gnu.org) - * - * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology - * Author: Fuxin Zhang, zhangfx@lemote.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ - -#include <linux/io.h> -#include <linux/init.h> -#include <linux/types.h> - -#include <asm/serial.h> - -#define UART16550_BAUD_2400 2400 -#define UART16550_BAUD_4800 4800 -#define UART16550_BAUD_9600 9600 -#define UART16550_BAUD_19200 19200 -#define UART16550_BAUD_38400 38400 -#define UART16550_BAUD_57600 57600 -#define UART16550_BAUD_115200 115200 - -#define UART16550_PARITY_NONE 0 -#define UART16550_PARITY_ODD 0x08 -#define UART16550_PARITY_EVEN 0x18 -#define UART16550_PARITY_MARK 0x28 -#define UART16550_PARITY_SPACE 0x38 - -#define UART16550_DATA_5BIT 0x0 -#define UART16550_DATA_6BIT 0x1 -#define UART16550_DATA_7BIT 0x2 -#define UART16550_DATA_8BIT 0x3 - -#define UART16550_STOP_1BIT 0x0 -#define UART16550_STOP_2BIT 0x4 - -/* ----------------------------------------------------- */ - -/* === CONFIG === */ -#ifdef CONFIG_64BIT -#define BASE (0xffffffffbfd003f8) -#else -#define BASE (0xbfd003f8) -#endif - -#define MAX_BAUD BASE_BAUD -/* === END OF CONFIG === */ - -#define REG_OFFSET 1 - -/* register offset */ -#define OFS_RCV_BUFFER 0 -#define OFS_TRANS_HOLD 0 -#define OFS_SEND_BUFFER 0 -#define OFS_INTR_ENABLE (1*REG_OFFSET) -#define OFS_INTR_ID (2*REG_OFFSET) -#define OFS_DATA_FORMAT (3*REG_OFFSET) -#define OFS_LINE_CONTROL (3*REG_OFFSET) -#define OFS_MODEM_CONTROL (4*REG_OFFSET) -#define OFS_RS232_OUTPUT (4*REG_OFFSET) -#define OFS_LINE_STATUS (5*REG_OFFSET) -#define OFS_MODEM_STATUS (6*REG_OFFSET) -#define OFS_RS232_INPUT (6*REG_OFFSET) -#define OFS_SCRATCH_PAD (7*REG_OFFSET) - -#define OFS_DIVISOR_LSB (0*REG_OFFSET) -#define OFS_DIVISOR_MSB (1*REG_OFFSET) - -/* memory-mapped read/write of the port */ -#define UART16550_READ(y) readb((char *)BASE + (y)) -#define UART16550_WRITE(y, z) writeb(z, (char *)BASE + (y)) - -void debugInit(u32 baud, u8 data, u8 parity, u8 stop) -{ - u32 divisor; - - /* disable interrupts */ - UART16550_WRITE(OFS_INTR_ENABLE, 0); - - /* set up buad rate */ - /* set DIAB bit */ - UART16550_WRITE(OFS_LINE_CONTROL, 0x80); - - /* set divisor */ - divisor = MAX_BAUD / baud; - UART16550_WRITE(OFS_DIVISOR_LSB, divisor & 0xff); - UART16550_WRITE(OFS_DIVISOR_MSB, (divisor & 0xff00) >> 8); - - /* clear DIAB bit */ - UART16550_WRITE(OFS_LINE_CONTROL, 0x0); - - /* set data format */ - UART16550_WRITE(OFS_DATA_FORMAT, data | parity | stop); -} - -static int remoteDebugInitialized; - -u8 getDebugChar(void) -{ - if (!remoteDebugInitialized) { - remoteDebugInitialized = 1; - debugInit(UART16550_BAUD_115200, - UART16550_DATA_8BIT, - UART16550_PARITY_NONE, UART16550_STOP_1BIT); - } - - while ((UART16550_READ(OFS_LINE_STATUS) & 0x1) == 0) ; - return UART16550_READ(OFS_RCV_BUFFER); -} - -int putDebugChar(u8 byte) -{ - if (!remoteDebugInitialized) { - remoteDebugInitialized = 1; - /* - debugInit(UART16550_BAUD_115200, - UART16550_DATA_8BIT, - UART16550_PARITY_NONE, UART16550_STOP_1BIT); */ - } - - while ((UART16550_READ(OFS_LINE_STATUS) & 0x20) == 0) ; - UART16550_WRITE(OFS_SEND_BUFFER, byte); - return 1; -} diff --git a/arch/mips/lemote/lm2e/irq.c b/arch/mips/lemote/lm2e/irq.c deleted file mode 100644 index 1d0a09f3b83..00000000000 --- a/arch/mips/lemote/lm2e/irq.c +++ /dev/null @@ -1,143 +0,0 @@ -/* - * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology - * Author: Fuxin Zhang, zhangfx@lemote.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ -#include <linux/delay.h> -#include <linux/io.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/irq.h> - -#include <asm/irq_cpu.h> -#include <asm/i8259.h> -#include <asm/mipsregs.h> -#include <asm/mips-boards/bonito64.h> - - -/* - * the first level int-handler will jump here if it is a bonito irq - */ -static void bonito_irqdispatch(void) -{ - u32 int_status; - int i; - - /* workaround the IO dma problem: let cpu looping to allow DMA finish */ - int_status = BONITO_INTISR; - if (int_status & (1 << 10)) { - while (int_status & (1 << 10)) { - udelay(1); - int_status = BONITO_INTISR; - } - } - - /* Get pending sources, masked by current enables */ - int_status = BONITO_INTISR & BONITO_INTEN; - - if (int_status != 0) { - i = __ffs(int_status); - int_status &= ~(1 << i); - do_IRQ(BONITO_IRQ_BASE + i); - } -} - -static void i8259_irqdispatch(void) -{ - int irq; - - irq = i8259_irq(); - if (irq >= 0) { - do_IRQ(irq); - } else { - spurious_interrupt(); - } - -} - -asmlinkage void plat_irq_dispatch(void) -{ - unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM; - - if (pending & CAUSEF_IP7) { - do_IRQ(MIPS_CPU_IRQ_BASE + 7); - } else if (pending & CAUSEF_IP5) { - i8259_irqdispatch(); - } else if (pending & CAUSEF_IP2) { - bonito_irqdispatch(); - } else { - spurious_interrupt(); - } -} - -static struct irqaction cascade_irqaction = { - .handler = no_action, - .name = "cascade", -}; - -void __init arch_init_irq(void) -{ - extern void bonito_irq_init(void); - - /* - * Clear all of the interrupts while we change the able around a bit. - * int-handler is not on bootstrap - */ - clear_c0_status(ST0_IM | ST0_BEV); - local_irq_disable(); - - /* most bonito irq should be level triggered */ - BONITO_INTEDGE = BONITO_ICU_SYSTEMERR | BONITO_ICU_MASTERERR | - BONITO_ICU_RETRYERR | BONITO_ICU_MBOXES; - BONITO_INTSTEER = 0; - - /* - * Mask out all interrupt by writing "1" to all bit position in - * the interrupt reset reg. - */ - BONITO_INTENCLR = ~0; - - /* init all controller - * 0-15 ------> i8259 interrupt - * 16-23 ------> mips cpu interrupt - * 32-63 ------> bonito irq - */ - - /* Sets the first-level interrupt dispatcher. */ - mips_cpu_irq_init(); - init_i8259_irqs(); - bonito_irq_init(); - - /* - printk("GPIODATA=%x, GPIOIE=%x\n", BONITO_GPIODATA, BONITO_GPIOIE); - printk("INTEN=%x, INTSET=%x, INTCLR=%x, INTISR=%x\n", - BONITO_INTEN, BONITO_INTENSET, - BONITO_INTENCLR, BONITO_INTISR); - */ - - /* bonito irq at IP2 */ - setup_irq(MIPS_CPU_IRQ_BASE + 2, &cascade_irqaction); - /* 8259 irq at IP5 */ - setup_irq(MIPS_CPU_IRQ_BASE + 5, &cascade_irqaction); - -} diff --git a/arch/mips/lemote/lm2e/pci.c b/arch/mips/lemote/lm2e/pci.c deleted file mode 100644 index 8be03a8e1ad..00000000000 --- a/arch/mips/lemote/lm2e/pci.c +++ /dev/null @@ -1,97 +0,0 @@ -/* - * pci.c - * - * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology - * Author: Fuxin Zhang, zhangfx@lemote.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <asm/mips-boards/bonito64.h> -#include <asm/mach-lemote/pci.h> - -extern struct pci_ops bonito64_pci_ops; - -static struct resource loongson2e_pci_mem_resource = { - .name = "LOONGSON2E PCI MEM", - .start = LOONGSON2E_PCI_MEM_START, - .end = LOONGSON2E_PCI_MEM_END, - .flags = IORESOURCE_MEM, -}; - -static struct resource loongson2e_pci_io_resource = { - .name = "LOONGSON2E PCI IO MEM", - .start = LOONGSON2E_PCI_IO_START, - .end = IO_SPACE_LIMIT, - .flags = IORESOURCE_IO, -}; - -static struct pci_controller loongson2e_pci_controller = { - .pci_ops = &bonito64_pci_ops, - .io_resource = &loongson2e_pci_io_resource, - .mem_resource = &loongson2e_pci_mem_resource, - .mem_offset = 0x00000000UL, - .io_offset = 0x00000000UL, -}; - -static void __init ict_pcimap(void) -{ - /* - * local to PCI mapping: [256M,512M] -> [256M,512M]; differ from PMON - * - * CPU address space [256M,448M] is window for accessing pci space - * we set pcimap_lo[0,1,2] to map it to pci space [256M,448M] - * pcimap: bit18,pcimap_2; bit[17-12],lo2;bit[11-6],lo1;bit[5-0],lo0 - */ - /* 1,00 0110 ,0001 01,00 0000 */ - BONITO_PCIMAP = 0x46140; - - /* 1, 00 0010, 0000,01, 00 0000 */ - /* BONITO_PCIMAP = 0x42040; */ - - /* - * PCI to local mapping: [2G,2G+256M] -> [0,256M] - */ - BONITO_PCIBASE0 = 0x80000000; - BONITO_PCIBASE1 = 0x00800000; - BONITO_PCIBASE2 = 0x90000000; - -} - -static int __init pcibios_init(void) -{ - ict_pcimap(); - - loongson2e_pci_controller.io_map_base = - (unsigned long) ioremap(LOONGSON2E_IO_PORT_BASE, - loongson2e_pci_io_resource.end - - loongson2e_pci_io_resource.start + 1); - - register_pci_controller(&loongson2e_pci_controller); - - return 0; -} - -arch_initcall(pcibios_init); diff --git a/arch/mips/lemote/lm2e/prom.c b/arch/mips/lemote/lm2e/prom.c deleted file mode 100644 index 7edc15dfed6..00000000000 --- a/arch/mips/lemote/lm2e/prom.c +++ /dev/null @@ -1,97 +0,0 @@ -/* - * Based on Ocelot Linux port, which is - * Copyright 2001 MontaVista Software Inc. - * Author: jsun@mvista.com or jsun@junsun.net - * - * Copyright 2003 ICT CAS - * Author: Michael Guo <guoyi@ict.ac.cn> - * - * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology - * Author: Fuxin Zhang, zhangfx@lemote.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include <linux/init.h> -#include <linux/bootmem.h> -#include <asm/bootinfo.h> - -extern unsigned long bus_clock; -extern unsigned long cpu_clock_freq; -extern unsigned int memsize, highmemsize; -extern int putDebugChar(unsigned char byte); - -static int argc; -/* pmon passes arguments in 32bit pointers */ -static int *arg; -static int *env; - -const char *get_system_type(void) -{ - return "lemote-fulong"; -} - -void __init prom_init_cmdline(void) -{ - int i; - long l; - - /* arg[0] is "g", the rest is boot parameters */ - arcs_cmdline[0] = '\0'; - for (i = 1; i < argc; i++) { - l = (long)arg[i]; - if (strlen(arcs_cmdline) + strlen(((char *)l) + 1) - >= sizeof(arcs_cmdline)) - break; - strcat(arcs_cmdline, ((char *)l)); - strcat(arcs_cmdline, " "); - } -} - -void __init prom_init(void) -{ - long l; - argc = fw_arg0; - arg = (int *)fw_arg1; - env = (int *)fw_arg2; - - prom_init_cmdline(); - - if ((strstr(arcs_cmdline, "console=")) == NULL) - strcat(arcs_cmdline, " console=ttyS0,115200"); - if ((strstr(arcs_cmdline, "root=")) == NULL) - strcat(arcs_cmdline, " root=/dev/hda1"); - -#define parse_even_earlier(res, option, p) \ -do { \ - if (strncmp(option, (char *)p, strlen(option)) == 0) \ - res = simple_strtol((char *)p + strlen(option"="), \ - NULL, 10); \ -} while (0) - - l = (long)*env; - while (l != 0) { - parse_even_earlier(bus_clock, "busclock", l); - parse_even_earlier(cpu_clock_freq, "cpuclock", l); - parse_even_earlier(memsize, "memsize", l); - parse_even_earlier(highmemsize, "highmemsize", l); - env++; - l = (long)*env; - } - if (memsize == 0) - memsize = 256; - - pr_info("busclock=%ld, cpuclock=%ld,memsize=%d,highmemsize=%d\n", - bus_clock, cpu_clock_freq, memsize, highmemsize); -} - -void __init prom_free_prom_memory(void) -{ -} - -void prom_putchar(char c) -{ - putDebugChar(c); -} diff --git a/arch/mips/lemote/lm2e/reset.c b/arch/mips/lemote/lm2e/reset.c deleted file mode 100644 index 099387a3827..00000000000 --- a/arch/mips/lemote/lm2e/reset.c +++ /dev/null @@ -1,41 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology - * Author: Fuxin Zhang, zhangfx@lemote.com - */ -#include <linux/pm.h> - -#include <asm/reboot.h> - -static void loongson2e_restart(char *command) -{ -#ifdef CONFIG_32BIT - *(unsigned long *)0xbfe00104 &= ~(1 << 2); - *(unsigned long *)0xbfe00104 |= (1 << 2); -#else - *(unsigned long *)0xffffffffbfe00104 &= ~(1 << 2); - *(unsigned long *)0xffffffffbfe00104 |= (1 << 2); -#endif - __asm__ __volatile__("jr\t%0"::"r"(0xbfc00000)); -} - -static void loongson2e_halt(void) -{ - while (1) ; -} - -static void loongson2e_power_off(void) -{ - loongson2e_halt(); -} - -void mips_reboot_setup(void) -{ - _machine_restart = loongson2e_restart; - _machine_halt = loongson2e_halt; - pm_power_off = loongson2e_power_off; -} diff --git a/arch/mips/lemote/lm2e/setup.c b/arch/mips/lemote/lm2e/setup.c deleted file mode 100644 index ebd6ceaef2f..00000000000 --- a/arch/mips/lemote/lm2e/setup.c +++ /dev/null @@ -1,111 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * setup.c - board dependent boot routines - * - * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology - * Author: Fuxin Zhang, zhangfx@lemote.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ -#include <linux/bootmem.h> -#include <linux/init.h> -#include <linux/irq.h> - -#include <asm/bootinfo.h> -#include <asm/mc146818-time.h> -#include <asm/time.h> -#include <asm/wbflush.h> -#include <asm/mach-lemote/pci.h> - -#ifdef CONFIG_VT -#include <linux/console.h> -#include <linux/screen_info.h> -#endif - -extern void mips_reboot_setup(void); - -unsigned long cpu_clock_freq; -unsigned long bus_clock; -unsigned int memsize; -unsigned int highmemsize = 0; - -void __init plat_time_init(void) -{ - /* setup mips r4k timer */ - mips_hpt_frequency = cpu_clock_freq / 2; -} - -unsigned long read_persistent_clock(void) -{ - return mc146818_get_cmos_time(); -} - -void (*__wbflush)(void); -EXPORT_SYMBOL(__wbflush); - -static void wbflush_loongson2e(void) -{ - asm(".set\tpush\n\t" - ".set\tnoreorder\n\t" - ".set mips3\n\t" - "sync\n\t" - "nop\n\t" - ".set\tpop\n\t" - ".set mips0\n\t"); -} - -void __init plat_mem_setup(void) -{ - set_io_port_base((unsigned long)ioremap(LOONGSON2E_IO_PORT_BASE, - IO_SPACE_LIMIT - LOONGSON2E_PCI_IO_START + 1)); - mips_reboot_setup(); - - __wbflush = wbflush_loongson2e; - - add_memory_region(0x0, (memsize << 20), BOOT_MEM_RAM); -#ifdef CONFIG_64BIT - if (highmemsize > 0) { - add_memory_region(0x20000000, highmemsize << 20, BOOT_MEM_RAM); - } -#endif - -#ifdef CONFIG_VT -#if defined(CONFIG_VGA_CONSOLE) - conswitchp = &vga_con; - - screen_info = (struct screen_info) { - 0, 25, /* orig-x, orig-y */ - 0, /* unused */ - 0, /* orig-video-page */ - 0, /* orig-video-mode */ - 80, /* orig-video-cols */ - 0, 0, 0, /* ega_ax, ega_bx, ega_cx */ - 25, /* orig-video-lines */ - VIDEO_TYPE_VGAC, /* orig-video-isVGA */ - 16 /* orig-video-points */ - }; -#elif defined(CONFIG_DUMMY_CONSOLE) - conswitchp = &dummy_con; -#endif -#endif - -} diff --git a/arch/mips/loongson/Kconfig b/arch/mips/loongson/Kconfig new file mode 100644 index 00000000000..d45092505fa --- /dev/null +++ b/arch/mips/loongson/Kconfig @@ -0,0 +1,31 @@ +choice + prompt "Machine Type" + depends on MACH_LOONGSON + +config LEMOTE_FULOONG2E + bool "Lemote Fuloong(2e) mini-PC" + select ARCH_SPARSEMEM_ENABLE + select CEVT_R4K + select CSRC_R4K + select SYS_HAS_CPU_LOONGSON2E + select DMA_NONCOHERENT + select BOOT_ELF32 + select BOARD_SCACHE + select HW_HAS_PCI + select I8259 + select ISA + select IRQ_CPU + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_SUPPORTS_HIGHMEM + select SYS_HAS_EARLY_PRINTK + select GENERIC_HARDIRQS_NO__DO_IRQ + select GENERIC_ISA_DMA_SUPPORT_BROKEN + select CPU_HAS_WB + help + Lemote Fuloong(2e) mini-PC board based on the Chinese Loongson-2E CPU and + an FPGA northbridge + + Lemote Fuloong(2e) mini PC have a VIA686B south bridge. +endchoice diff --git a/arch/mips/loongson/Makefile b/arch/mips/loongson/Makefile new file mode 100644 index 00000000000..39048c455d7 --- /dev/null +++ b/arch/mips/loongson/Makefile @@ -0,0 +1,11 @@ +# +# Common code for all Loongson based systems +# + +obj-$(CONFIG_MACH_LOONGSON) += common/ + +# +# Lemote Fuloong mini-PC (Loongson 2E-based) +# + +obj-$(CONFIG_LEMOTE_FULOONG2E) += fuloong-2e/ diff --git a/arch/mips/loongson/common/Makefile b/arch/mips/loongson/common/Makefile new file mode 100644 index 00000000000..656b3cc0a2a --- /dev/null +++ b/arch/mips/loongson/common/Makefile @@ -0,0 +1,11 @@ +# +# Makefile for loongson based machines. +# + +obj-y += setup.o init.o cmdline.o env.o time.o reset.o irq.o \ + pci.o bonito-irq.o mem.o machtype.o + +# +# Early printk support +# +obj-$(CONFIG_EARLY_PRINTK) += early_printk.o diff --git a/arch/mips/lemote/lm2e/bonito-irq.c b/arch/mips/loongson/common/bonito-irq.c index 8fc3bce7075..3e31e7ad713 100644 --- a/arch/mips/lemote/lm2e/bonito-irq.c +++ b/arch/mips/loongson/common/bonito-irq.c @@ -10,32 +10,10 @@ * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * */ -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/types.h> #include <linux/interrupt.h> -#include <linux/irq.h> - -#include <asm/mips-boards/bonito64.h> +#include <loongson.h> static inline void bonito_irq_enable(unsigned int irq) { @@ -66,9 +44,8 @@ void bonito_irq_init(void) { u32 i; - for (i = BONITO_IRQ_BASE; i < BONITO_IRQ_BASE + 32; i++) { + for (i = BONITO_IRQ_BASE; i < BONITO_IRQ_BASE + 32; i++) set_irq_chip_and_handler(i, &bonito_irq_type, handle_level_irq); - } setup_irq(BONITO_IRQ_BASE + 10, &dma_timeout_irqaction); } diff --git a/arch/mips/loongson/common/cmdline.c b/arch/mips/loongson/common/cmdline.c new file mode 100644 index 00000000000..75f1b243ee4 --- /dev/null +++ b/arch/mips/loongson/common/cmdline.c @@ -0,0 +1,52 @@ +/* + * Based on Ocelot Linux port, which is + * Copyright 2001 MontaVista Software Inc. + * Author: jsun@mvista.com or jsun@junsun.net + * + * Copyright 2003 ICT CAS + * Author: Michael Guo <guoyi@ict.ac.cn> + * + * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology + * Author: Fuxin Zhang, zhangfx@lemote.com + * + * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology + * Author: Wu Zhangjin, wuzj@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <asm/bootinfo.h> + +#include <loongson.h> + +int prom_argc; +/* pmon passes arguments in 32bit pointers */ +int *_prom_argv; + +void __init prom_init_cmdline(void) +{ + int i; + long l; + + /* firmware arguments are initialized in head.S */ + prom_argc = fw_arg0; + _prom_argv = (int *)fw_arg1; + + /* arg[0] is "g", the rest is boot parameters */ + arcs_cmdline[0] = '\0'; + for (i = 1; i < prom_argc; i++) { + l = (long)_prom_argv[i]; + if (strlen(arcs_cmdline) + strlen(((char *)l) + 1) + >= sizeof(arcs_cmdline)) + break; + strcat(arcs_cmdline, ((char *)l)); + strcat(arcs_cmdline, " "); + } + + if ((strstr(arcs_cmdline, "console=")) == NULL) + strcat(arcs_cmdline, " console=ttyS0,115200"); + if ((strstr(arcs_cmdline, "root=")) == NULL) + strcat(arcs_cmdline, " root=/dev/hda1"); +} diff --git a/arch/mips/loongson/common/early_printk.c b/arch/mips/loongson/common/early_printk.c new file mode 100644 index 00000000000..bc73edc0cfd --- /dev/null +++ b/arch/mips/loongson/common/early_printk.c @@ -0,0 +1,38 @@ +/* early printk support + * + * Copyright (c) 2009 Philippe Vachon <philippe@cowpig.ca> + * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology + * Author: Wu Zhangjin, wuzj@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/serial_reg.h> + +#include <loongson.h> +#include <machine.h> + +#define PORT(base, offset) (u8 *)(base + offset) + +static inline unsigned int serial_in(phys_addr_t base, int offset) +{ + return readb(PORT(base, offset)); +} + +static inline void serial_out(phys_addr_t base, int offset, int value) +{ + writeb(value, PORT(base, offset)); +} + +void prom_putchar(char c) +{ + phys_addr_t uart_base = + (phys_addr_t) ioremap_nocache(LOONGSON_UART_BASE, 8); + + while ((serial_in(uart_base, UART_LSR) & UART_LSR_THRE) == 0) + ; + + serial_out(uart_base, UART_TX, c); +} diff --git a/arch/mips/loongson/common/env.c b/arch/mips/loongson/common/env.c new file mode 100644 index 00000000000..b9ef5038554 --- /dev/null +++ b/arch/mips/loongson/common/env.c @@ -0,0 +1,58 @@ +/* + * Based on Ocelot Linux port, which is + * Copyright 2001 MontaVista Software Inc. + * Author: jsun@mvista.com or jsun@junsun.net + * + * Copyright 2003 ICT CAS + * Author: Michael Guo <guoyi@ict.ac.cn> + * + * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology + * Author: Fuxin Zhang, zhangfx@lemote.com + * + * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology + * Author: Wu Zhangjin, wuzj@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <asm/bootinfo.h> + +#include <loongson.h> + +unsigned long bus_clock, cpu_clock_freq; +unsigned long memsize, highmemsize; + +/* pmon passes arguments in 32bit pointers */ +int *_prom_envp; + +#define parse_even_earlier(res, option, p) \ +do { \ + if (strncmp(option, (char *)p, strlen(option)) == 0) \ + strict_strtol((char *)p + strlen(option"="), \ + 10, &res); \ +} while (0) + +void __init prom_init_env(void) +{ + long l; + + /* firmware arguments are initialized in head.S */ + _prom_envp = (int *)fw_arg2; + + l = (long)*_prom_envp; + while (l != 0) { + parse_even_earlier(bus_clock, "busclock", l); + parse_even_earlier(cpu_clock_freq, "cpuclock", l); + parse_even_earlier(memsize, "memsize", l); + parse_even_earlier(highmemsize, "highmemsize", l); + _prom_envp++; + l = (long)*_prom_envp; + } + if (memsize == 0) + memsize = 256; + + pr_info("busclock=%ld, cpuclock=%ld, memsize=%ld, highmemsize=%ld\n", + bus_clock, cpu_clock_freq, memsize, highmemsize); +} diff --git a/arch/mips/loongson/common/init.c b/arch/mips/loongson/common/init.c new file mode 100644 index 00000000000..3abe927422a --- /dev/null +++ b/arch/mips/loongson/common/init.c @@ -0,0 +1,30 @@ +/* + * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology + * Author: Wu Zhangjin, wuzj@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/bootmem.h> + +#include <asm/bootinfo.h> + +#include <loongson.h> + +void __init prom_init(void) +{ + /* init base address of io space */ + set_io_port_base((unsigned long) + ioremap(BONITO_PCIIO_BASE, BONITO_PCIIO_SIZE)); + + prom_init_cmdline(); + prom_init_env(); + prom_init_memory(); +} + +void __init prom_free_prom_memory(void) +{ +} diff --git a/arch/mips/loongson/common/irq.c b/arch/mips/loongson/common/irq.c new file mode 100644 index 00000000000..f368c735cbd --- /dev/null +++ b/arch/mips/loongson/common/irq.c @@ -0,0 +1,74 @@ +/* + * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology + * Author: Fuxin Zhang, zhangfx@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/delay.h> +#include <linux/interrupt.h> + +#include <loongson.h> +/* + * the first level int-handler will jump here if it is a bonito irq + */ +void bonito_irqdispatch(void) +{ + u32 int_status; + int i; + + /* workaround the IO dma problem: let cpu looping to allow DMA finish */ + int_status = BONITO_INTISR; + if (int_status & (1 << 10)) { + while (int_status & (1 << 10)) { + udelay(1); + int_status = BONITO_INTISR; + } + } + + /* Get pending sources, masked by current enables */ + int_status = BONITO_INTISR & BONITO_INTEN; + + if (int_status != 0) { + i = __ffs(int_status); + int_status &= ~(1 << i); + do_IRQ(BONITO_IRQ_BASE + i); + } +} + +asmlinkage void plat_irq_dispatch(void) +{ + unsigned int pending; + + pending = read_c0_cause() & read_c0_status() & ST0_IM; + + /* machine-specific plat_irq_dispatch */ + mach_irq_dispatch(pending); +} + +void __init arch_init_irq(void) +{ + /* + * Clear all of the interrupts while we change the able around a bit. + * int-handler is not on bootstrap + */ + clear_c0_status(ST0_IM | ST0_BEV); + local_irq_disable(); + + /* setting irq trigger mode */ + set_irq_trigger_mode(); + + /* no steer */ + BONITO_INTSTEER = 0; + + /* + * Mask out all interrupt by writing "1" to all bit position in + * the interrupt reset reg. + */ + BONITO_INTENCLR = ~0; + + /* machine specific irq init */ + mach_init_irq(); +} diff --git a/arch/mips/loongson/common/machtype.c b/arch/mips/loongson/common/machtype.c new file mode 100644 index 00000000000..7b348248de7 --- /dev/null +++ b/arch/mips/loongson/common/machtype.c @@ -0,0 +1,50 @@ +/* + * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology + * Author: Wu Zhangjin, wuzj@lemote.com + * + * Copyright (c) 2009 Zhang Le <r0bertz@gentoo.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/errno.h> +#include <asm/bootinfo.h> + +#include <loongson.h> +#include <machine.h> + +static const char *system_types[] = { + [MACH_LOONGSON_UNKNOWN] "unknown loongson machine", + [MACH_LEMOTE_FL2E] "lemote-fuloong-2e-box", + [MACH_LEMOTE_FL2F] "lemote-fuloong-2f-box", + [MACH_LEMOTE_ML2F7] "lemote-mengloong-2f-7inches", + [MACH_LEMOTE_YL2F89] "lemote-yeeloong-2f-8.9inches", + [MACH_DEXXON_GDIUM2F10] "dexxon-gidum-2f-10inches", + [MACH_LOONGSON_END] NULL, +}; + +const char *get_system_type(void) +{ + if (mips_machtype == MACH_UNKNOWN) + mips_machtype = LOONGSON_MACHTYPE; + + return system_types[mips_machtype]; +} + +static __init int machtype_setup(char *str) +{ + int machtype = MACH_LEMOTE_FL2E; + + if (!str) + return -EINVAL; + + for (; system_types[machtype]; machtype++) + if (strstr(system_types[machtype], str)) { + mips_machtype = machtype; + break; + } + return 0; +} +__setup("machtype=", machtype_setup); diff --git a/arch/mips/lemote/lm2e/mem.c b/arch/mips/loongson/common/mem.c index 16cd21587d3..7c92f79b648 100644 --- a/arch/mips/lemote/lm2e/mem.c +++ b/arch/mips/loongson/common/mem.c @@ -8,16 +8,28 @@ #include <linux/fcntl.h> #include <linux/mm.h> +#include <asm/bootinfo.h> + +#include <loongson.h> +#include <mem.h> + +void __init prom_init_memory(void) +{ + add_memory_region(0x0, (memsize << 20), BOOT_MEM_RAM); +#ifdef CONFIG_64BIT + if (highmemsize > 0) + add_memory_region(LOONGSON_HIGHMEM_START, + highmemsize << 20, BOOT_MEM_RAM); +#endif /* CONFIG_64BIT */ +} + /* override of arch/mips/mm/cache.c: __uncached_access */ int __uncached_access(struct file *file, unsigned long addr) { if (file->f_flags & O_SYNC) return 1; - /* - * On the Lemote Loongson 2e system, the peripheral registers - * reside between 0x1000:0000 and 0x2000:0000. - */ return addr >= __pa(high_memory) || - ((addr >= 0x10000000) && (addr < 0x20000000)); + ((addr >= LOONGSON_MMIO_MEM_START) && + (addr < LOONGSON_MMIO_MEM_END)); } diff --git a/arch/mips/loongson/common/pci.c b/arch/mips/loongson/common/pci.c new file mode 100644 index 00000000000..a3a4abfb6c9 --- /dev/null +++ b/arch/mips/loongson/common/pci.c @@ -0,0 +1,83 @@ +/* + * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology + * Author: Fuxin Zhang, zhangfx@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/pci.h> + +#include <pci.h> +#include <loongson.h> + +static struct resource loongson_pci_mem_resource = { + .name = "pci memory space", + .start = LOONGSON_PCI_MEM_START, + .end = LOONGSON_PCI_MEM_END, + .flags = IORESOURCE_MEM, +}; + +static struct resource loongson_pci_io_resource = { + .name = "pci io space", + .start = LOONGSON_PCI_IO_START, + .end = IO_SPACE_LIMIT, + .flags = IORESOURCE_IO, +}; + +static struct pci_controller loongson_pci_controller = { + .pci_ops = &bonito64_pci_ops, + .io_resource = &loongson_pci_io_resource, + .mem_resource = &loongson_pci_mem_resource, + .mem_offset = 0x00000000UL, + .io_offset = 0x00000000UL, +}; + +static void __init setup_pcimap(void) +{ + /* + * local to PCI mapping for CPU accessing PCI space + * CPU address space [256M,448M] is window for accessing pci space + * we set pcimap_lo[0,1,2] to map it to pci space[0M,64M], [320M,448M] + * + * pcimap: PCI_MAP2 PCI_Mem_Lo2 PCI_Mem_Lo1 PCI_Mem_Lo0 + * [<2G] [384M,448M] [320M,384M] [0M,64M] + */ + BONITO_PCIMAP = BONITO_PCIMAP_PCIMAP_2 | + BONITO_PCIMAP_WIN(2, BONITO_PCILO2_BASE) | + BONITO_PCIMAP_WIN(1, BONITO_PCILO1_BASE) | + BONITO_PCIMAP_WIN(0, 0); + + /* + * PCI-DMA to local mapping: [2G,2G+256M] -> [0M,256M] + */ + BONITO_PCIBASE0 = 0x80000000ul; /* base: 2G -> mmap: 0M */ + /* size: 256M, burst transmission, pre-fetch enable, 64bit */ + LOONGSON_PCI_HIT0_SEL_L = 0xc000000cul; + LOONGSON_PCI_HIT0_SEL_H = 0xfffffffful; + LOONGSON_PCI_HIT1_SEL_L = 0x00000006ul; /* set this BAR as invalid */ + LOONGSON_PCI_HIT1_SEL_H = 0x00000000ul; + LOONGSON_PCI_HIT2_SEL_L = 0x00000006ul; /* set this BAR as invalid */ + LOONGSON_PCI_HIT2_SEL_H = 0x00000000ul; + + /* avoid deadlock of PCI reading/writing lock operation */ + LOONGSON_PCI_ISR4C = 0xd2000001ul; + + /* can not change gnt to break pci transfer when device's gnt not + deassert for some broken device */ + LOONGSON_PXARB_CFG = 0x00fe0105ul; +} + +static int __init pcibios_init(void) +{ + setup_pcimap(); + + loongson_pci_controller.io_map_base = mips_io_port_base; + + register_pci_controller(&loongson_pci_controller); + + return 0; +} + +arch_initcall(pcibios_init); diff --git a/arch/mips/loongson/common/reset.c b/arch/mips/loongson/common/reset.c new file mode 100644 index 00000000000..97e918251ed --- /dev/null +++ b/arch/mips/loongson/common/reset.c @@ -0,0 +1,44 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology + * Author: Fuxin Zhang, zhangfx@lemote.com + * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology + * Author: Zhangjin Wu, wuzj@lemote.com + */ +#include <linux/init.h> +#include <linux/pm.h> + +#include <asm/reboot.h> + +#include <loongson.h> + +static void loongson_restart(char *command) +{ + /* do preparation for reboot */ + mach_prepare_reboot(); + + /* reboot via jumping to boot base address */ + ((void (*)(void))ioremap_nocache(BONITO_BOOT_BASE, 4)) (); +} + +static void loongson_halt(void) +{ + mach_prepare_shutdown(); + while (1) + ; +} + +static int __init mips_reboot_setup(void) +{ + _machine_restart = loongson_restart; + _machine_halt = loongson_halt; + pm_power_off = loongson_halt; + + return 0; +} + +arch_initcall(mips_reboot_setup); diff --git a/arch/mips/loongson/common/setup.c b/arch/mips/loongson/common/setup.c new file mode 100644 index 00000000000..4cd2aa9a342 --- /dev/null +++ b/arch/mips/loongson/common/setup.c @@ -0,0 +1,58 @@ +/* + * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology + * Author: Fuxin Zhang, zhangfx@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/module.h> + +#include <asm/wbflush.h> + +#include <loongson.h> + +#ifdef CONFIG_VT +#include <linux/console.h> +#include <linux/screen_info.h> +#endif + +void (*__wbflush)(void); +EXPORT_SYMBOL(__wbflush); + +static void wbflush_loongson(void) +{ + asm(".set\tpush\n\t" + ".set\tnoreorder\n\t" + ".set mips3\n\t" + "sync\n\t" + "nop\n\t" + ".set\tpop\n\t" + ".set mips0\n\t"); +} + +void __init plat_mem_setup(void) +{ + __wbflush = wbflush_loongson; + +#ifdef CONFIG_VT +#if defined(CONFIG_VGA_CONSOLE) + conswitchp = &vga_con; + + screen_info = (struct screen_info) { + 0, 25, /* orig-x, orig-y */ + 0, /* unused */ + 0, /* orig-video-page */ + 0, /* orig-video-mode */ + 80, /* orig-video-cols */ + 0, 0, 0, /* ega_ax, ega_bx, ega_cx */ + 25, /* orig-video-lines */ + VIDEO_TYPE_VGAC, /* orig-video-isVGA */ + 16 /* orig-video-points */ + }; +#elif defined(CONFIG_DUMMY_CONSOLE) + conswitchp = &dummy_con; +#endif +#endif +} diff --git a/arch/mips/loongson/common/time.c b/arch/mips/loongson/common/time.c new file mode 100644 index 00000000000..6e08c8270ab --- /dev/null +++ b/arch/mips/loongson/common/time.c @@ -0,0 +1,28 @@ +/* + * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology + * Author: Fuxin Zhang, zhangfx@lemote.com + * + * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology + * Author: Wu Zhangjin, wuzj@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <asm/mc146818-time.h> +#include <asm/time.h> + +#include <loongson.h> + +void __init plat_time_init(void) +{ + /* setup mips r4k timer */ + mips_hpt_frequency = cpu_clock_freq / 2; +} + +void read_persistent_clock(struct timespec *ts) +{ + ts->tv_sec = mc146818_get_cmos_time(); + ts->tv_nsec = 0; +} diff --git a/arch/mips/loongson/fuloong-2e/Makefile b/arch/mips/loongson/fuloong-2e/Makefile new file mode 100644 index 00000000000..3aba5fcc09d --- /dev/null +++ b/arch/mips/loongson/fuloong-2e/Makefile @@ -0,0 +1,7 @@ +# +# Makefile for Lemote Fuloong2e mini-PC board. +# + +obj-y += irq.o reset.o + +EXTRA_CFLAGS += -Werror diff --git a/arch/mips/loongson/fuloong-2e/irq.c b/arch/mips/loongson/fuloong-2e/irq.c new file mode 100644 index 00000000000..7888cf69424 --- /dev/null +++ b/arch/mips/loongson/fuloong-2e/irq.c @@ -0,0 +1,71 @@ +/* + * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology + * Author: Fuxin Zhang, zhangfx@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/interrupt.h> + +#include <asm/irq_cpu.h> +#include <asm/i8259.h> + +#include <loongson.h> + +static void i8259_irqdispatch(void) +{ + int irq; + + irq = i8259_irq(); + if (irq >= 0) + do_IRQ(irq); + else + spurious_interrupt(); +} + +asmlinkage void mach_irq_dispatch(unsigned int pending) +{ + if (pending & CAUSEF_IP7) + do_IRQ(MIPS_CPU_IRQ_BASE + 7); + else if (pending & CAUSEF_IP6) /* perf counter loverflow */ + do_IRQ(LOONGSON2_PERFCNT_IRQ); + else if (pending & CAUSEF_IP5) + i8259_irqdispatch(); + else if (pending & CAUSEF_IP2) + bonito_irqdispatch(); + else + spurious_interrupt(); +} + +static struct irqaction cascade_irqaction = { + .handler = no_action, + .name = "cascade", +}; + +void __init set_irq_trigger_mode(void) +{ + /* most bonito irq should be level triggered */ + BONITO_INTEDGE = BONITO_ICU_SYSTEMERR | BONITO_ICU_MASTERERR | + BONITO_ICU_RETRYERR | BONITO_ICU_MBOXES; +} + +void __init mach_init_irq(void) +{ + /* init all controller + * 0-15 ------> i8259 interrupt + * 16-23 ------> mips cpu interrupt + * 32-63 ------> bonito irq + */ + + /* Sets the first-level interrupt dispatcher. */ + mips_cpu_irq_init(); + init_i8259_irqs(); + bonito_irq_init(); + + /* bonito irq at IP2 */ + setup_irq(MIPS_CPU_IRQ_BASE + 2, &cascade_irqaction); + /* 8259 irq at IP5 */ + setup_irq(MIPS_CPU_IRQ_BASE + 5, &cascade_irqaction); +} diff --git a/arch/mips/loongson/fuloong-2e/reset.c b/arch/mips/loongson/fuloong-2e/reset.c new file mode 100644 index 00000000000..677fe186db9 --- /dev/null +++ b/arch/mips/loongson/fuloong-2e/reset.c @@ -0,0 +1,23 @@ +/* Board-specific reboot/shutdown routines + * Copyright (c) 2009 Philippe Vachon <philippe@cowpig.ca> + * + * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology + * Author: Wu Zhangjin, wuzj@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <loongson.h> + +void mach_prepare_reboot(void) +{ + BONITO_BONGENCFG &= ~(1 << 2); + BONITO_BONGENCFG |= (1 << 2); +} + +void mach_prepare_shutdown(void) +{ +} diff --git a/arch/mips/mipssim/sim_setup.c b/arch/mips/mipssim/sim_setup.c index 7c7148ef264..2877675c5f0 100644 --- a/arch/mips/mipssim/sim_setup.c +++ b/arch/mips/mipssim/sim_setup.c @@ -37,7 +37,7 @@ static void __init serial_init(void); -unsigned int _isbonito = 0; +unsigned int _isbonito; const char *get_system_type(void) { diff --git a/arch/mips/mipssim/sim_smtc.c b/arch/mips/mipssim/sim_smtc.c index d6e4f656ad1..5da30b6a65b 100644 --- a/arch/mips/mipssim/sim_smtc.c +++ b/arch/mips/mipssim/sim_smtc.c @@ -43,11 +43,12 @@ static void ssmtc_send_ipi_single(int cpu, unsigned int action) /* "CPU" may be TC of same VPE, VPE of same CPU, or different CPU */ } -static inline void ssmtc_send_ipi_mask(cpumask_t mask, unsigned int action) +static inline void ssmtc_send_ipi_mask(const struct cpumask *mask, + unsigned int action) { unsigned int i; - for_each_cpu_mask(i, mask) + for_each_cpu(i, mask) ssmtc_send_ipi_single(i, action); } diff --git a/arch/mips/mm/c-octeon.c b/arch/mips/mm/c-octeon.c index 10ab69f7183..94e05e5733c 100644 --- a/arch/mips/mm/c-octeon.c +++ b/arch/mips/mm/c-octeon.c @@ -79,7 +79,7 @@ static void octeon_flush_icache_all_cores(struct vm_area_struct *vma) * cores it has been used on */ if (vma) - mask = vma->vm_mm->cpu_vm_mask; + mask = *mm_cpumask(vma->vm_mm); else mask = cpu_online_map; cpu_clear(cpu, mask); diff --git a/arch/mips/mm/fault.c b/arch/mips/mm/fault.c index f956ecbb813..e97a7a2fb2c 100644 --- a/arch/mips/mm/fault.c +++ b/arch/mips/mm/fault.c @@ -58,11 +58,17 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long write, * only copy the information from the master page table, * nothing more. */ +#ifdef CONFIG_64BIT +# define VMALLOC_FAULT_TARGET no_context +#else +# define VMALLOC_FAULT_TARGET vmalloc_fault +#endif + if (unlikely(address >= VMALLOC_START && address <= VMALLOC_END)) - goto vmalloc_fault; + goto VMALLOC_FAULT_TARGET; #ifdef MODULE_START if (unlikely(address >= MODULE_START && address < MODULE_END)) - goto vmalloc_fault; + goto VMALLOC_FAULT_TARGET; #endif /* @@ -203,6 +209,7 @@ do_sigbus: force_sig_info(SIGBUS, &info, tsk); return; +#ifndef CONFIG_64BIT vmalloc_fault: { /* @@ -241,4 +248,5 @@ vmalloc_fault: goto no_context; return; } +#endif } diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c index 0e820508ff2..15aa1902a78 100644 --- a/arch/mips/mm/init.c +++ b/arch/mips/mm/init.c @@ -352,7 +352,6 @@ void __init paging_init(void) free_area_init_nodes(max_zone_pfns); } -static struct kcore_list kcore_mem, kcore_vmalloc; #ifdef CONFIG_64BIT static struct kcore_list kcore_kseg0; #endif @@ -409,15 +408,13 @@ void __init mem_init(void) if ((unsigned long) &_text > (unsigned long) CKSEG0) /* The -4 is a hack so that user tools don't have to handle the overflow. */ - kclist_add(&kcore_kseg0, (void *) CKSEG0, 0x80000000 - 4); + kclist_add(&kcore_kseg0, (void *) CKSEG0, + 0x80000000 - 4, KCORE_TEXT); #endif - kclist_add(&kcore_mem, __va(0), max_low_pfn << PAGE_SHIFT); - kclist_add(&kcore_vmalloc, (void *)VMALLOC_START, - VMALLOC_END-VMALLOC_START); printk(KERN_INFO "Memory: %luk/%luk available (%ldk kernel code, " "%ldk reserved, %ldk data, %ldk init, %ldk highmem)\n", - (unsigned long) nr_free_pages() << (PAGE_SHIFT-10), + nr_free_pages() << (PAGE_SHIFT-10), ram << (PAGE_SHIFT-10), codesize >> 10, reservedpages << (PAGE_SHIFT-10), @@ -475,9 +472,6 @@ unsigned long pgd_current[NR_CPUS]; */ pgd_t swapper_pg_dir[_PTRS_PER_PGD] __page_aligned(_PGD_ORDER); #ifdef CONFIG_64BIT -#ifdef MODULE_START -pgd_t module_pg_dir[PTRS_PER_PGD] __page_aligned(PGD_ORDER); -#endif pmd_t invalid_pmd_table[PTRS_PER_PMD] __page_aligned(PMD_ORDER); #endif pte_t invalid_pte_table[PTRS_PER_PTE] __page_aligned(PTE_ORDER); diff --git a/arch/mips/mm/pgtable-64.c b/arch/mips/mm/pgtable-64.c index e4b565aeb00..1121019fa45 100644 --- a/arch/mips/mm/pgtable-64.c +++ b/arch/mips/mm/pgtable-64.c @@ -59,9 +59,6 @@ void __init pagetable_init(void) /* Initialize the entire pgd. */ pgd_init((unsigned long)swapper_pg_dir); -#ifdef MODULE_START - pgd_init((unsigned long)module_pg_dir); -#endif pmd_init((unsigned long)invalid_pmd_table, (unsigned long)invalid_pte_table); pgd_base = swapper_pg_dir; diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c index cee502caf39..d73428b18b0 100644 --- a/arch/mips/mm/tlb-r4k.c +++ b/arch/mips/mm/tlb-r4k.c @@ -475,7 +475,7 @@ static void __cpuinit probe_tlb(unsigned long config) c->tlbsize = ((reg >> 25) & 0x3f) + 1; } -static int __cpuinitdata ntlb = 0; +static int __cpuinitdata ntlb; static int __init set_ntlb(char *str) { get_option(&str, &ntlb); diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index 9a17bf8395d..bb1719a55d2 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -321,6 +321,10 @@ static void __cpuinit build_tlb_write_entry(u32 **p, struct uasm_label **l, case CPU_BCM3302: case CPU_BCM4710: case CPU_LOONGSON2: + case CPU_BCM6338: + case CPU_BCM6345: + case CPU_BCM6348: + case CPU_BCM6358: case CPU_R5500: if (m4kc_tlbp_war()) uasm_i_nop(p); @@ -499,11 +503,7 @@ build_get_pmde64(u32 **p, struct uasm_label **l, struct uasm_reloc **r, * The vmalloc handling is not in the hotpath. */ uasm_i_dmfc0(p, tmp, C0_BADVADDR); -#ifdef MODULE_START - uasm_il_bltz(p, r, tmp, label_module_alloc); -#else uasm_il_bltz(p, r, tmp, label_vmalloc); -#endif /* No uasm_i_nop needed here, since the next insn doesn't touch TMP. */ #ifdef CONFIG_SMP @@ -556,52 +556,7 @@ build_get_pgd_vmalloc64(u32 **p, struct uasm_label **l, struct uasm_reloc **r, { long swpd = (long)swapper_pg_dir; -#ifdef MODULE_START - long modd = (long)module_pg_dir; - - uasm_l_module_alloc(l, *p); - /* - * Assumption: - * VMALLOC_START >= 0xc000000000000000UL - * MODULE_START >= 0xe000000000000000UL - */ - UASM_i_SLL(p, ptr, bvaddr, 2); - uasm_il_bgez(p, r, ptr, label_vmalloc); - - if (uasm_in_compat_space_p(MODULE_START) && - !uasm_rel_lo(MODULE_START)) { - uasm_i_lui(p, ptr, uasm_rel_hi(MODULE_START)); /* delay slot */ - } else { - /* unlikely configuration */ - uasm_i_nop(p); /* delay slot */ - UASM_i_LA(p, ptr, MODULE_START); - } - uasm_i_dsubu(p, bvaddr, bvaddr, ptr); - - if (uasm_in_compat_space_p(modd) && !uasm_rel_lo(modd)) { - uasm_il_b(p, r, label_vmalloc_done); - uasm_i_lui(p, ptr, uasm_rel_hi(modd)); - } else { - UASM_i_LA_mostly(p, ptr, modd); - uasm_il_b(p, r, label_vmalloc_done); - if (uasm_in_compat_space_p(modd)) - uasm_i_addiu(p, ptr, ptr, uasm_rel_lo(modd)); - else - uasm_i_daddiu(p, ptr, ptr, uasm_rel_lo(modd)); - } - uasm_l_vmalloc(l, *p); - if (uasm_in_compat_space_p(MODULE_START) && - !uasm_rel_lo(MODULE_START) && - MODULE_START << 32 == VMALLOC_START) - uasm_i_dsll32(p, ptr, ptr, 0); /* typical case */ - else - UASM_i_LA(p, ptr, VMALLOC_START); -#else - uasm_l_vmalloc(l, *p); - UASM_i_LA(p, ptr, VMALLOC_START); -#endif - uasm_i_dsubu(p, bvaddr, bvaddr, ptr); if (uasm_in_compat_space_p(swpd) && !uasm_rel_lo(swpd)) { uasm_il_b(p, r, label_vmalloc_done); diff --git a/arch/mips/mti-malta/malta-init.c b/arch/mips/mti-malta/malta-init.c index 27c807b67fe..f1b14c8a4a1 100644 --- a/arch/mips/mti-malta/malta-init.c +++ b/arch/mips/mti-malta/malta-init.c @@ -47,7 +47,7 @@ int *_prom_argv, *_prom_envp; */ #define prom_envp(index) ((char *)(long)_prom_envp[(index)]) -int init_debug = 0; +int init_debug; static int mips_revision_corid; int mips_revision_sconid; diff --git a/arch/mips/mti-malta/malta-reset.c b/arch/mips/mti-malta/malta-reset.c index f48d60e8429..32942053624 100644 --- a/arch/mips/mti-malta/malta-reset.c +++ b/arch/mips/mti-malta/malta-reset.c @@ -22,6 +22,7 @@ * Reset the MIPS boards. * */ +#include <linux/init.h> #include <linux/pm.h> #include <asm/io.h> @@ -45,9 +46,13 @@ static void mips_machine_halt(void) } -void mips_reboot_setup(void) +static int __init mips_reboot_setup(void) { _machine_restart = mips_machine_restart; _machine_halt = mips_machine_halt; pm_power_off = mips_machine_halt; + + return 0; } + +arch_initcall(mips_reboot_setup); diff --git a/arch/mips/mti-malta/malta-setup.c b/arch/mips/mti-malta/malta-setup.c index dc78b8983ee..b7f37d4982f 100644 --- a/arch/mips/mti-malta/malta-setup.c +++ b/arch/mips/mti-malta/malta-setup.c @@ -218,7 +218,6 @@ void __init plat_mem_setup(void) #if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE) screen_info_setup(); #endif - mips_reboot_setup(); board_be_init = malta_be_init; board_be_handler = malta_be_handler; diff --git a/arch/mips/mti-malta/malta-smtc.c b/arch/mips/mti-malta/malta-smtc.c index 499ffe5475d..192cfd2a539 100644 --- a/arch/mips/mti-malta/malta-smtc.c +++ b/arch/mips/mti-malta/malta-smtc.c @@ -21,11 +21,11 @@ static void msmtc_send_ipi_single(int cpu, unsigned int action) smtc_send_ipi(cpu, LINUX_SMP_IPI, action); } -static void msmtc_send_ipi_mask(cpumask_t mask, unsigned int action) +static void msmtc_send_ipi_mask(const struct cpumask *mask, unsigned int action) { unsigned int i; - for_each_cpu_mask(i, mask) + for_each_cpu(i, mask) msmtc_send_ipi_single(i, action); } diff --git a/arch/mips/mti-malta/malta-time.c b/arch/mips/mti-malta/malta-time.c index 0b97d47691f..3c6f190aa61 100644 --- a/arch/mips/mti-malta/malta-time.c +++ b/arch/mips/mti-malta/malta-time.c @@ -100,9 +100,10 @@ static unsigned int __init estimate_cpu_frequency(void) return count; } -unsigned long read_persistent_clock(void) +void read_persistent_clock(struct timespec *ts) { - return mc146818_get_cmos_time(); + ts->tv_sec = mc146818_get_cmos_time(); + ts->tv_nsec = 0; } static void __init plat_perf_setup(void) diff --git a/arch/mips/nxp/pnx833x/stb22x/board.c b/arch/mips/nxp/pnx833x/stb22x/board.c index 90cc604bdad..644eb7c3210 100644 --- a/arch/mips/nxp/pnx833x/stb22x/board.c +++ b/arch/mips/nxp/pnx833x/stb22x/board.c @@ -39,7 +39,7 @@ #define PNX8335_DEBUG7 0x441c int prom_argc; -char **prom_argv = 0, **prom_envp = 0; +char **prom_argv, **prom_envp; extern void prom_init_cmdline(void); extern char *prom_getenv(char *envname); diff --git a/arch/mips/nxp/pnx8550/common/proc.c b/arch/mips/nxp/pnx8550/common/proc.c index acf1fa88944..af094cd1d85 100644 --- a/arch/mips/nxp/pnx8550/common/proc.c +++ b/arch/mips/nxp/pnx8550/common/proc.c @@ -69,9 +69,9 @@ static int pnx8550_registers_read(char* page, char** start, off_t offset, int co return len; } -static struct proc_dir_entry* pnx8550_dir = NULL; -static struct proc_dir_entry* pnx8550_timers = NULL; -static struct proc_dir_entry* pnx8550_registers = NULL; +static struct proc_dir_entry* pnx8550_dir; +static struct proc_dir_entry* pnx8550_timers; +static struct proc_dir_entry* pnx8550_registers; static int pnx8550_proc_init( void ) { diff --git a/arch/mips/oprofile/Makefile b/arch/mips/oprofile/Makefile index bf3be6fcf7f..02cc65e52d1 100644 --- a/arch/mips/oprofile/Makefile +++ b/arch/mips/oprofile/Makefile @@ -15,3 +15,4 @@ oprofile-$(CONFIG_CPU_MIPS64) += op_model_mipsxx.o oprofile-$(CONFIG_CPU_R10000) += op_model_mipsxx.o oprofile-$(CONFIG_CPU_SB1) += op_model_mipsxx.o oprofile-$(CONFIG_CPU_RM9000) += op_model_rm9000.o +oprofile-$(CONFIG_CPU_LOONGSON2) += op_model_loongson2.o diff --git a/arch/mips/oprofile/common.c b/arch/mips/oprofile/common.c index 3bf3354547f..7832ad257a1 100644 --- a/arch/mips/oprofile/common.c +++ b/arch/mips/oprofile/common.c @@ -16,6 +16,7 @@ extern struct op_mips_model op_model_mipsxx_ops __attribute__((weak)); extern struct op_mips_model op_model_rm9000_ops __attribute__((weak)); +extern struct op_mips_model op_model_loongson2_ops __attribute__((weak)); static struct op_mips_model *model; @@ -93,6 +94,9 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) case CPU_RM9000: lmodel = &op_model_rm9000_ops; break; + case CPU_LOONGSON2: + lmodel = &op_model_loongson2_ops; + break; }; if (!lmodel) diff --git a/arch/mips/oprofile/op_model_loongson2.c b/arch/mips/oprofile/op_model_loongson2.c new file mode 100644 index 00000000000..655cb8dec34 --- /dev/null +++ b/arch/mips/oprofile/op_model_loongson2.c @@ -0,0 +1,177 @@ +/* + * Loongson2 performance counter driver for oprofile + * + * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology + * Author: Yanhua <yanh@lemote.com> + * Author: Wu Zhangjin <wuzj@lemote.com> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ +#include <linux/init.h> +#include <linux/oprofile.h> +#include <linux/interrupt.h> + +#include <loongson.h> /* LOONGSON2_PERFCNT_IRQ */ +#include "op_impl.h" + +/* + * a patch should be sent to oprofile with the loongson-specific support. + * otherwise, the oprofile tool will not recognize this and complain about + * "cpu_type 'unset' is not valid". + */ +#define LOONGSON2_CPU_TYPE "mips/godson2" + +#define LOONGSON2_COUNTER1_EVENT(event) ((event & 0x0f) << 5) +#define LOONGSON2_COUNTER2_EVENT(event) ((event & 0x0f) << 9) + +#define LOONGSON2_PERFCNT_EXL (1UL << 0) +#define LOONGSON2_PERFCNT_KERNEL (1UL << 1) +#define LOONGSON2_PERFCNT_SUPERVISOR (1UL << 2) +#define LOONGSON2_PERFCNT_USER (1UL << 3) +#define LOONGSON2_PERFCNT_INT_EN (1UL << 4) +#define LOONGSON2_PERFCNT_OVERFLOW (1ULL << 31) + +/* Loongson2 performance counter register */ +#define read_c0_perfctrl() __read_64bit_c0_register($24, 0) +#define write_c0_perfctrl(val) __write_64bit_c0_register($24, 0, val) +#define read_c0_perfcnt() __read_64bit_c0_register($25, 0) +#define write_c0_perfcnt(val) __write_64bit_c0_register($25, 0, val) + +static struct loongson2_register_config { + unsigned int ctrl; + unsigned long long reset_counter1; + unsigned long long reset_counter2; + int cnt1_enalbed, cnt2_enalbed; +} reg; + +DEFINE_SPINLOCK(sample_lock); + +static char *oprofid = "LoongsonPerf"; +static irqreturn_t loongson2_perfcount_handler(int irq, void *dev_id); +/* Compute all of the registers in preparation for enabling profiling. */ + +static void loongson2_reg_setup(struct op_counter_config *cfg) +{ + unsigned int ctrl = 0; + + reg.reset_counter1 = 0; + reg.reset_counter2 = 0; + /* Compute the performance counter ctrl word. */ + /* For now count kernel and user mode */ + if (cfg[0].enabled) { + ctrl |= LOONGSON2_COUNTER1_EVENT(cfg[0].event); + reg.reset_counter1 = 0x80000000ULL - cfg[0].count; + } + + if (cfg[1].enabled) { + ctrl |= LOONGSON2_COUNTER2_EVENT(cfg[1].event); + reg.reset_counter2 = (0x80000000ULL - cfg[1].count); + } + + if (cfg[0].enabled || cfg[1].enabled) { + ctrl |= LOONGSON2_PERFCNT_EXL | LOONGSON2_PERFCNT_INT_EN; + if (cfg[0].kernel || cfg[1].kernel) + ctrl |= LOONGSON2_PERFCNT_KERNEL; + if (cfg[0].user || cfg[1].user) + ctrl |= LOONGSON2_PERFCNT_USER; + } + + reg.ctrl = ctrl; + + reg.cnt1_enalbed = cfg[0].enabled; + reg.cnt2_enalbed = cfg[1].enabled; + +} + +/* Program all of the registers in preparation for enabling profiling. */ + +static void loongson2_cpu_setup(void *args) +{ + uint64_t perfcount; + + perfcount = (reg.reset_counter2 << 32) | reg.reset_counter1; + write_c0_perfcnt(perfcount); +} + +static void loongson2_cpu_start(void *args) +{ + /* Start all counters on current CPU */ + if (reg.cnt1_enalbed || reg.cnt2_enalbed) + write_c0_perfctrl(reg.ctrl); +} + +static void loongson2_cpu_stop(void *args) +{ + /* Stop all counters on current CPU */ + write_c0_perfctrl(0); + memset(®, 0, sizeof(reg)); +} + +static irqreturn_t loongson2_perfcount_handler(int irq, void *dev_id) +{ + uint64_t counter, counter1, counter2; + struct pt_regs *regs = get_irq_regs(); + int enabled; + unsigned long flags; + + /* + * LOONGSON2 defines two 32-bit performance counters. + * To avoid a race updating the registers we need to stop the counters + * while we're messing with + * them ... + */ + + /* Check whether the irq belongs to me */ + enabled = reg.cnt1_enalbed | reg.cnt2_enalbed; + if (!enabled) + return IRQ_NONE; + + counter = read_c0_perfcnt(); + counter1 = counter & 0xffffffff; + counter2 = counter >> 32; + + spin_lock_irqsave(&sample_lock, flags); + + if (counter1 & LOONGSON2_PERFCNT_OVERFLOW) { + if (reg.cnt1_enalbed) + oprofile_add_sample(regs, 0); + counter1 = reg.reset_counter1; + } + if (counter2 & LOONGSON2_PERFCNT_OVERFLOW) { + if (reg.cnt2_enalbed) + oprofile_add_sample(regs, 1); + counter2 = reg.reset_counter2; + } + + spin_unlock_irqrestore(&sample_lock, flags); + + write_c0_perfcnt((counter2 << 32) | counter1); + + return IRQ_HANDLED; +} + +static int __init loongson2_init(void) +{ + return request_irq(LOONGSON2_PERFCNT_IRQ, loongson2_perfcount_handler, + IRQF_SHARED, "Perfcounter", oprofid); +} + +static void loongson2_exit(void) +{ + write_c0_perfctrl(0); + free_irq(LOONGSON2_PERFCNT_IRQ, oprofid); +} + +struct op_mips_model op_model_loongson2_ops = { + .reg_setup = loongson2_reg_setup, + .cpu_setup = loongson2_cpu_setup, + .init = loongson2_init, + .exit = loongson2_exit, + .cpu_start = loongson2_cpu_start, + .cpu_stop = loongson2_cpu_stop, + .cpu_type = LOONGSON2_CPU_TYPE, + .num_counters = 2 +}; diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index 63d8a297c58..91bfe73a7f6 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -16,6 +16,8 @@ obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o obj-$(CONFIG_NEC_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o obj-$(CONFIG_PCI_TX4927) += ops-tx4927.o obj-$(CONFIG_BCM47XX) += pci-bcm47xx.o +obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o fixup-bcm63xx.o \ + ops-bcm63xx.o # # These are still pretty much in the old state, watch, go blind. @@ -26,7 +28,7 @@ obj-$(CONFIG_MIPS_COBALT) += fixup-cobalt.o obj-$(CONFIG_SOC_AU1500) += fixup-au1000.o ops-au1000.o obj-$(CONFIG_SOC_AU1550) += fixup-au1000.o ops-au1000.o obj-$(CONFIG_SOC_PNX8550) += fixup-pnx8550.o ops-pnx8550.o -obj-$(CONFIG_LEMOTE_FULONG) += fixup-lm2e.o ops-bonito64.o +obj-$(CONFIG_LEMOTE_FULOONG2E) += fixup-fuloong2e.o ops-bonito64.o obj-$(CONFIG_MIPS_MALTA) += fixup-malta.o obj-$(CONFIG_PMC_MSP7120_GW) += fixup-pmcmsp.o ops-pmcmsp.o obj-$(CONFIG_PMC_MSP7120_EVAL) += fixup-pmcmsp.o ops-pmcmsp.o diff --git a/arch/mips/pci/fixup-bcm63xx.c b/arch/mips/pci/fixup-bcm63xx.c new file mode 100644 index 00000000000..340863009da --- /dev/null +++ b/arch/mips/pci/fixup-bcm63xx.c @@ -0,0 +1,21 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> + */ + +#include <linux/types.h> +#include <linux/pci.h> +#include <bcm63xx_cpu.h> + +int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + return bcm63xx_get_irq_number(IRQ_PCI); +} + +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + return 0; +} diff --git a/arch/mips/pci/fixup-lm2e.c b/arch/mips/pci/fixup-fuloong2e.c index e18ae4f574c..0c4c7a81213 100644 --- a/arch/mips/pci/fixup-lm2e.c +++ b/arch/mips/pci/fixup-fuloong2e.c @@ -1,6 +1,4 @@ /* - * fixup-lm2e.c - * * Copyright (C) 2004 ICT CAS * Author: Li xiaoyu, ICT CAS * lixy@ict.ac.cn @@ -12,22 +10,6 @@ * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * */ #include <linux/init.h> #include <linux/pci.h> diff --git a/arch/mips/pci/ops-bcm63xx.c b/arch/mips/pci/ops-bcm63xx.c new file mode 100644 index 00000000000..822ae179bc5 --- /dev/null +++ b/arch/mips/pci/ops-bcm63xx.c @@ -0,0 +1,467 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> + */ + +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/io.h> + +#include "pci-bcm63xx.h" + +/* + * swizzle 32bits data to return only the needed part + */ +static int postprocess_read(u32 data, int where, unsigned int size) +{ + u32 ret; + + ret = 0; + switch (size) { + case 1: + ret = (data >> ((where & 3) << 3)) & 0xff; + break; + case 2: + ret = (data >> ((where & 3) << 3)) & 0xffff; + break; + case 4: + ret = data; + break; + } + return ret; +} + +static int preprocess_write(u32 orig_data, u32 val, int where, + unsigned int size) +{ + u32 ret; + + ret = 0; + switch (size) { + case 1: + ret = (orig_data & ~(0xff << ((where & 3) << 3))) | + (val << ((where & 3) << 3)); + break; + case 2: + ret = (orig_data & ~(0xffff << ((where & 3) << 3))) | + (val << ((where & 3) << 3)); + break; + case 4: + ret = val; + break; + } + return ret; +} + +/* + * setup hardware for a configuration cycle with given parameters + */ +static int bcm63xx_setup_cfg_access(int type, unsigned int busn, + unsigned int devfn, int where) +{ + unsigned int slot, func, reg; + u32 val; + + slot = PCI_SLOT(devfn); + func = PCI_FUNC(devfn); + reg = where >> 2; + + /* sanity check */ + if (slot > (MPI_L2PCFG_DEVNUM_MASK >> MPI_L2PCFG_DEVNUM_SHIFT)) + return 1; + + if (func > (MPI_L2PCFG_FUNC_MASK >> MPI_L2PCFG_FUNC_SHIFT)) + return 1; + + if (reg > (MPI_L2PCFG_REG_MASK >> MPI_L2PCFG_REG_SHIFT)) + return 1; + + /* ok, setup config access */ + val = (reg << MPI_L2PCFG_REG_SHIFT); + val |= (func << MPI_L2PCFG_FUNC_SHIFT); + val |= (slot << MPI_L2PCFG_DEVNUM_SHIFT); + val |= MPI_L2PCFG_CFG_USEREG_MASK; + val |= MPI_L2PCFG_CFG_SEL_MASK; + /* type 0 cycle for local bus, type 1 cycle for anything else */ + if (type != 0) { + /* FIXME: how to specify bus ??? */ + val |= (1 << MPI_L2PCFG_CFG_TYPE_SHIFT); + } + bcm_mpi_writel(val, MPI_L2PCFG_REG); + + return 0; +} + +static int bcm63xx_do_cfg_read(int type, unsigned int busn, + unsigned int devfn, int where, int size, + u32 *val) +{ + u32 data; + + /* two phase cycle, first we write address, then read data at + * another location, caller already has a spinlock so no need + * to add one here */ + if (bcm63xx_setup_cfg_access(type, busn, devfn, where)) + return PCIBIOS_DEVICE_NOT_FOUND; + iob(); + data = le32_to_cpu(__raw_readl(pci_iospace_start)); + /* restore IO space normal behaviour */ + bcm_mpi_writel(0, MPI_L2PCFG_REG); + + *val = postprocess_read(data, where, size); + + return PCIBIOS_SUCCESSFUL; +} + +static int bcm63xx_do_cfg_write(int type, unsigned int busn, + unsigned int devfn, int where, int size, + u32 val) +{ + u32 data; + + /* two phase cycle, first we write address, then write data to + * another location, caller already has a spinlock so no need + * to add one here */ + if (bcm63xx_setup_cfg_access(type, busn, devfn, where)) + return PCIBIOS_DEVICE_NOT_FOUND; + iob(); + + data = le32_to_cpu(__raw_readl(pci_iospace_start)); + data = preprocess_write(data, val, where, size); + + __raw_writel(cpu_to_le32(data), pci_iospace_start); + wmb(); + /* no way to know the access is done, we have to wait */ + udelay(500); + /* restore IO space normal behaviour */ + bcm_mpi_writel(0, MPI_L2PCFG_REG); + + return PCIBIOS_SUCCESSFUL; +} + +static int bcm63xx_pci_read(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 *val) +{ + int type; + + type = bus->parent ? 1 : 0; + + if (type == 0 && PCI_SLOT(devfn) == CARDBUS_PCI_IDSEL) + return PCIBIOS_DEVICE_NOT_FOUND; + + return bcm63xx_do_cfg_read(type, bus->number, devfn, + where, size, val); +} + +static int bcm63xx_pci_write(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 val) +{ + int type; + + type = bus->parent ? 1 : 0; + + if (type == 0 && PCI_SLOT(devfn) == CARDBUS_PCI_IDSEL) + return PCIBIOS_DEVICE_NOT_FOUND; + + return bcm63xx_do_cfg_write(type, bus->number, devfn, + where, size, val); +} + +struct pci_ops bcm63xx_pci_ops = { + .read = bcm63xx_pci_read, + .write = bcm63xx_pci_write +}; + +#ifdef CONFIG_CARDBUS +/* + * emulate configuration read access on a cardbus bridge + */ +#define FAKE_CB_BRIDGE_SLOT 0x1e + +static int fake_cb_bridge_bus_number = -1; + +static struct { + u16 pci_command; + u8 cb_latency; + u8 subordinate_busn; + u8 cardbus_busn; + u8 pci_busn; + int bus_assigned; + u16 bridge_control; + + u32 mem_base0; + u32 mem_limit0; + u32 mem_base1; + u32 mem_limit1; + + u32 io_base0; + u32 io_limit0; + u32 io_base1; + u32 io_limit1; +} fake_cb_bridge_regs; + +static int fake_cb_bridge_read(int where, int size, u32 *val) +{ + unsigned int reg; + u32 data; + + data = 0; + reg = where >> 2; + switch (reg) { + case (PCI_VENDOR_ID >> 2): + case (PCI_CB_SUBSYSTEM_VENDOR_ID >> 2): + /* create dummy vendor/device id from our cpu id */ + data = (bcm63xx_get_cpu_id() << 16) | PCI_VENDOR_ID_BROADCOM; + break; + + case (PCI_COMMAND >> 2): + data = (PCI_STATUS_DEVSEL_SLOW << 16); + data |= fake_cb_bridge_regs.pci_command; + break; + + case (PCI_CLASS_REVISION >> 2): + data = (PCI_CLASS_BRIDGE_CARDBUS << 16); + break; + + case (PCI_CACHE_LINE_SIZE >> 2): + data = (PCI_HEADER_TYPE_CARDBUS << 16); + break; + + case (PCI_INTERRUPT_LINE >> 2): + /* bridge control */ + data = (fake_cb_bridge_regs.bridge_control << 16); + /* pin:intA line:0xff */ + data |= (0x1 << 8) | 0xff; + break; + + case (PCI_CB_PRIMARY_BUS >> 2): + data = (fake_cb_bridge_regs.cb_latency << 24); + data |= (fake_cb_bridge_regs.subordinate_busn << 16); + data |= (fake_cb_bridge_regs.cardbus_busn << 8); + data |= fake_cb_bridge_regs.pci_busn; + break; + + case (PCI_CB_MEMORY_BASE_0 >> 2): + data = fake_cb_bridge_regs.mem_base0; + break; + + case (PCI_CB_MEMORY_LIMIT_0 >> 2): + data = fake_cb_bridge_regs.mem_limit0; + break; + + case (PCI_CB_MEMORY_BASE_1 >> 2): + data = fake_cb_bridge_regs.mem_base1; + break; + + case (PCI_CB_MEMORY_LIMIT_1 >> 2): + data = fake_cb_bridge_regs.mem_limit1; + break; + + case (PCI_CB_IO_BASE_0 >> 2): + /* | 1 for 32bits io support */ + data = fake_cb_bridge_regs.io_base0 | 0x1; + break; + + case (PCI_CB_IO_LIMIT_0 >> 2): + data = fake_cb_bridge_regs.io_limit0; + break; + + case (PCI_CB_IO_BASE_1 >> 2): + /* | 1 for 32bits io support */ + data = fake_cb_bridge_regs.io_base1 | 0x1; + break; + + case (PCI_CB_IO_LIMIT_1 >> 2): + data = fake_cb_bridge_regs.io_limit1; + break; + } + + *val = postprocess_read(data, where, size); + return PCIBIOS_SUCCESSFUL; +} + +/* + * emulate configuration write access on a cardbus bridge + */ +static int fake_cb_bridge_write(int where, int size, u32 val) +{ + unsigned int reg; + u32 data, tmp; + int ret; + + ret = fake_cb_bridge_read((where & ~0x3), 4, &data); + if (ret != PCIBIOS_SUCCESSFUL) + return ret; + + data = preprocess_write(data, val, where, size); + + reg = where >> 2; + switch (reg) { + case (PCI_COMMAND >> 2): + fake_cb_bridge_regs.pci_command = (data & 0xffff); + break; + + case (PCI_CB_PRIMARY_BUS >> 2): + fake_cb_bridge_regs.cb_latency = (data >> 24) & 0xff; + fake_cb_bridge_regs.subordinate_busn = (data >> 16) & 0xff; + fake_cb_bridge_regs.cardbus_busn = (data >> 8) & 0xff; + fake_cb_bridge_regs.pci_busn = data & 0xff; + if (fake_cb_bridge_regs.cardbus_busn) + fake_cb_bridge_regs.bus_assigned = 1; + break; + + case (PCI_INTERRUPT_LINE >> 2): + tmp = (data >> 16) & 0xffff; + /* disable memory prefetch support */ + tmp &= ~PCI_CB_BRIDGE_CTL_PREFETCH_MEM0; + tmp &= ~PCI_CB_BRIDGE_CTL_PREFETCH_MEM1; + fake_cb_bridge_regs.bridge_control = tmp; + break; + + case (PCI_CB_MEMORY_BASE_0 >> 2): + fake_cb_bridge_regs.mem_base0 = data; + break; + + case (PCI_CB_MEMORY_LIMIT_0 >> 2): + fake_cb_bridge_regs.mem_limit0 = data; + break; + + case (PCI_CB_MEMORY_BASE_1 >> 2): + fake_cb_bridge_regs.mem_base1 = data; + break; + + case (PCI_CB_MEMORY_LIMIT_1 >> 2): + fake_cb_bridge_regs.mem_limit1 = data; + break; + + case (PCI_CB_IO_BASE_0 >> 2): + fake_cb_bridge_regs.io_base0 = data; + break; + + case (PCI_CB_IO_LIMIT_0 >> 2): + fake_cb_bridge_regs.io_limit0 = data; + break; + + case (PCI_CB_IO_BASE_1 >> 2): + fake_cb_bridge_regs.io_base1 = data; + break; + + case (PCI_CB_IO_LIMIT_1 >> 2): + fake_cb_bridge_regs.io_limit1 = data; + break; + } + + return PCIBIOS_SUCCESSFUL; +} + +static int bcm63xx_cb_read(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 *val) +{ + /* snoop access to slot 0x1e on root bus, we fake a cardbus + * bridge at this location */ + if (!bus->parent && PCI_SLOT(devfn) == FAKE_CB_BRIDGE_SLOT) { + fake_cb_bridge_bus_number = bus->number; + return fake_cb_bridge_read(where, size, val); + } + + /* a configuration cycle for the device behind the cardbus + * bridge is actually done as a type 0 cycle on the primary + * bus. This means that only one device can be on the cardbus + * bus */ + if (fake_cb_bridge_regs.bus_assigned && + bus->number == fake_cb_bridge_regs.cardbus_busn && + PCI_SLOT(devfn) == 0) + return bcm63xx_do_cfg_read(0, 0, + PCI_DEVFN(CARDBUS_PCI_IDSEL, 0), + where, size, val); + + return PCIBIOS_DEVICE_NOT_FOUND; +} + +static int bcm63xx_cb_write(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 val) +{ + if (!bus->parent && PCI_SLOT(devfn) == FAKE_CB_BRIDGE_SLOT) { + fake_cb_bridge_bus_number = bus->number; + return fake_cb_bridge_write(where, size, val); + } + + if (fake_cb_bridge_regs.bus_assigned && + bus->number == fake_cb_bridge_regs.cardbus_busn && + PCI_SLOT(devfn) == 0) + return bcm63xx_do_cfg_write(0, 0, + PCI_DEVFN(CARDBUS_PCI_IDSEL, 0), + where, size, val); + + return PCIBIOS_DEVICE_NOT_FOUND; +} + +struct pci_ops bcm63xx_cb_ops = { + .read = bcm63xx_cb_read, + .write = bcm63xx_cb_write, +}; + +/* + * only one IO window, so it cannot be shared by PCI and cardbus, use + * fixup to choose and detect unhandled configuration + */ +static void bcm63xx_fixup(struct pci_dev *dev) +{ + static int io_window = -1; + int i, found, new_io_window; + u32 val; + + /* look for any io resource */ + found = 0; + for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { + if (pci_resource_flags(dev, i) & IORESOURCE_IO) { + found = 1; + break; + } + } + + if (!found) + return; + + /* skip our fake bus with only cardbus bridge on it */ + if (dev->bus->number == fake_cb_bridge_bus_number) + return; + + /* find on which bus the device is */ + if (fake_cb_bridge_regs.bus_assigned && + dev->bus->number == fake_cb_bridge_regs.cardbus_busn && + PCI_SLOT(dev->devfn) == 0) + new_io_window = 1; + else + new_io_window = 0; + + if (new_io_window == io_window) + return; + + if (io_window != -1) { + printk(KERN_ERR "bcm63xx: both PCI and cardbus devices " + "need IO, which hardware cannot do\n"); + return; + } + + printk(KERN_INFO "bcm63xx: PCI IO window assigned to %s\n", + (new_io_window == 0) ? "PCI" : "cardbus"); + + val = bcm_mpi_readl(MPI_L2PIOREMAP_REG); + if (io_window) + val |= MPI_L2PREMAP_IS_CARDBUS_MASK; + else + val &= ~MPI_L2PREMAP_IS_CARDBUS_MASK; + bcm_mpi_writel(val, MPI_L2PIOREMAP_REG); + + io_window = new_io_window; +} + +DECLARE_PCI_FIXUP_ENABLE(PCI_ANY_ID, PCI_ANY_ID, bcm63xx_fixup); +#endif diff --git a/arch/mips/pci/ops-bonito64.c b/arch/mips/pci/ops-bonito64.c index f742c51acf0..54e55e7a243 100644 --- a/arch/mips/pci/ops-bonito64.c +++ b/arch/mips/pci/ops-bonito64.c @@ -29,7 +29,7 @@ #define PCI_ACCESS_READ 0 #define PCI_ACCESS_WRITE 1 -#ifdef CONFIG_LEMOTE_FULONG +#ifdef CONFIG_LEMOTE_FULOONG2E #define CFG_SPACE_REG(offset) (void *)CKSEG1ADDR(BONITO_PCICFG_BASE | (offset)) #define ID_SEL_BEGIN 11 #else @@ -77,7 +77,7 @@ static int bonito64_pcibios_config_access(unsigned char access_type, addrp = CFG_SPACE_REG(addr & 0xffff); if (access_type == PCI_ACCESS_WRITE) { writel(cpu_to_le32(*data), addrp); -#ifndef CONFIG_LEMOTE_FULONG +#ifndef CONFIG_LEMOTE_FULOONG2E /* Wait till done */ while (BONITO_PCIMSTAT & 0xF); #endif diff --git a/arch/mips/pci/pci-bcm1480.c b/arch/mips/pci/pci-bcm1480.c index a9060c77184..6f5e24c6ae6 100644 --- a/arch/mips/pci/pci-bcm1480.c +++ b/arch/mips/pci/pci-bcm1480.c @@ -57,7 +57,7 @@ static void *cfg_space; #define PCI_BUS_ENABLED 1 #define PCI_DEVICE_MODE 2 -static int bcm1480_bus_status = 0; +static int bcm1480_bus_status; #define PCI_BRIDGE_DEVICE 0 diff --git a/arch/mips/pci/pci-bcm1480ht.c b/arch/mips/pci/pci-bcm1480ht.c index f54f45412b0..50cc6e9e824 100644 --- a/arch/mips/pci/pci-bcm1480ht.c +++ b/arch/mips/pci/pci-bcm1480ht.c @@ -56,7 +56,7 @@ static void *ht_cfg_space; #define PCI_BUS_ENABLED 1 #define PCI_DEVICE_MODE 2 -static int bcm1480ht_bus_status = 0; +static int bcm1480ht_bus_status; #define PCI_BRIDGE_DEVICE 0 #define HT_BRIDGE_DEVICE 1 diff --git a/arch/mips/pci/pci-bcm63xx.c b/arch/mips/pci/pci-bcm63xx.c new file mode 100644 index 00000000000..82e0fde1dba --- /dev/null +++ b/arch/mips/pci/pci-bcm63xx.c @@ -0,0 +1,224 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> + */ + +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <asm/bootinfo.h> + +#include "pci-bcm63xx.h" + +/* + * Allow PCI to be disabled at runtime depending on board nvram + * configuration + */ +int bcm63xx_pci_enabled; + +static struct resource bcm_pci_mem_resource = { + .name = "bcm63xx PCI memory space", + .start = BCM_PCI_MEM_BASE_PA, + .end = BCM_PCI_MEM_END_PA, + .flags = IORESOURCE_MEM +}; + +static struct resource bcm_pci_io_resource = { + .name = "bcm63xx PCI IO space", + .start = BCM_PCI_IO_BASE_PA, +#ifdef CONFIG_CARDBUS + .end = BCM_PCI_IO_HALF_PA, +#else + .end = BCM_PCI_IO_END_PA, +#endif + .flags = IORESOURCE_IO +}; + +struct pci_controller bcm63xx_controller = { + .pci_ops = &bcm63xx_pci_ops, + .io_resource = &bcm_pci_io_resource, + .mem_resource = &bcm_pci_mem_resource, +}; + +/* + * We handle cardbus via a fake Cardbus bridge, memory and io spaces + * have to be clearly separated from PCI one since we have different + * memory decoder. + */ +#ifdef CONFIG_CARDBUS +static struct resource bcm_cb_mem_resource = { + .name = "bcm63xx Cardbus memory space", + .start = BCM_CB_MEM_BASE_PA, + .end = BCM_CB_MEM_END_PA, + .flags = IORESOURCE_MEM +}; + +static struct resource bcm_cb_io_resource = { + .name = "bcm63xx Cardbus IO space", + .start = BCM_PCI_IO_HALF_PA + 1, + .end = BCM_PCI_IO_END_PA, + .flags = IORESOURCE_IO +}; + +struct pci_controller bcm63xx_cb_controller = { + .pci_ops = &bcm63xx_cb_ops, + .io_resource = &bcm_cb_io_resource, + .mem_resource = &bcm_cb_mem_resource, +}; +#endif + +static u32 bcm63xx_int_cfg_readl(u32 reg) +{ + u32 tmp; + + tmp = reg & MPI_PCICFGCTL_CFGADDR_MASK; + tmp |= MPI_PCICFGCTL_WRITEEN_MASK; + bcm_mpi_writel(tmp, MPI_PCICFGCTL_REG); + iob(); + return bcm_mpi_readl(MPI_PCICFGDATA_REG); +} + +static void bcm63xx_int_cfg_writel(u32 val, u32 reg) +{ + u32 tmp; + + tmp = reg & MPI_PCICFGCTL_CFGADDR_MASK; + tmp |= MPI_PCICFGCTL_WRITEEN_MASK; + bcm_mpi_writel(tmp, MPI_PCICFGCTL_REG); + bcm_mpi_writel(val, MPI_PCICFGDATA_REG); +} + +void __iomem *pci_iospace_start; + +static int __init bcm63xx_pci_init(void) +{ + unsigned int mem_size; + u32 val; + + if (!BCMCPU_IS_6348() && !BCMCPU_IS_6358()) + return -ENODEV; + + if (!bcm63xx_pci_enabled) + return -ENODEV; + + /* + * configuration access are done through IO space, remap 4 + * first bytes to access it from CPU. + * + * this means that no io access from CPU should happen while + * we do a configuration cycle, but there's no way we can add + * a spinlock for each io access, so this is currently kind of + * broken on SMP. + */ + pci_iospace_start = ioremap_nocache(BCM_PCI_IO_BASE_PA, 4); + if (!pci_iospace_start) + return -ENOMEM; + + /* setup local bus to PCI access (PCI memory) */ + val = BCM_PCI_MEM_BASE_PA & MPI_L2P_BASE_MASK; + bcm_mpi_writel(val, MPI_L2PMEMBASE1_REG); + bcm_mpi_writel(~(BCM_PCI_MEM_SIZE - 1), MPI_L2PMEMRANGE1_REG); + bcm_mpi_writel(val | MPI_L2PREMAP_ENABLED_MASK, MPI_L2PMEMREMAP1_REG); + + /* set Cardbus IDSEL (type 0 cfg access on primary bus for + * this IDSEL will be done on Cardbus instead) */ + val = bcm_pcmcia_readl(PCMCIA_C1_REG); + val &= ~PCMCIA_C1_CBIDSEL_MASK; + val |= (CARDBUS_PCI_IDSEL << PCMCIA_C1_CBIDSEL_SHIFT); + bcm_pcmcia_writel(val, PCMCIA_C1_REG); + +#ifdef CONFIG_CARDBUS + /* setup local bus to PCI access (Cardbus memory) */ + val = BCM_CB_MEM_BASE_PA & MPI_L2P_BASE_MASK; + bcm_mpi_writel(val, MPI_L2PMEMBASE2_REG); + bcm_mpi_writel(~(BCM_CB_MEM_SIZE - 1), MPI_L2PMEMRANGE2_REG); + val |= MPI_L2PREMAP_ENABLED_MASK | MPI_L2PREMAP_IS_CARDBUS_MASK; + bcm_mpi_writel(val, MPI_L2PMEMREMAP2_REG); +#else + /* disable second access windows */ + bcm_mpi_writel(0, MPI_L2PMEMREMAP2_REG); +#endif + + /* setup local bus to PCI access (IO memory), we have only 1 + * IO window for both PCI and cardbus, but it cannot handle + * both at the same time, assume standard PCI for now, if + * cardbus card has IO zone, PCI fixup will change window to + * cardbus */ + val = BCM_PCI_IO_BASE_PA & MPI_L2P_BASE_MASK; + bcm_mpi_writel(val, MPI_L2PIOBASE_REG); + bcm_mpi_writel(~(BCM_PCI_IO_SIZE - 1), MPI_L2PIORANGE_REG); + bcm_mpi_writel(val | MPI_L2PREMAP_ENABLED_MASK, MPI_L2PIOREMAP_REG); + + /* enable PCI related GPIO pins */ + bcm_mpi_writel(MPI_LOCBUSCTL_EN_PCI_GPIO_MASK, MPI_LOCBUSCTL_REG); + + /* setup PCI to local bus access, used by PCI device to target + * local RAM while bus mastering */ + bcm63xx_int_cfg_writel(0, PCI_BASE_ADDRESS_3); + if (BCMCPU_IS_6358()) + val = MPI_SP0_REMAP_ENABLE_MASK; + else + val = 0; + bcm_mpi_writel(val, MPI_SP0_REMAP_REG); + + bcm63xx_int_cfg_writel(0x0, PCI_BASE_ADDRESS_4); + bcm_mpi_writel(0, MPI_SP1_REMAP_REG); + + mem_size = bcm63xx_get_memory_size(); + + /* 6348 before rev b0 exposes only 16 MB of RAM memory through + * PCI, throw a warning if we have more memory */ + if (BCMCPU_IS_6348() && (bcm63xx_get_cpu_rev() & 0xf0) == 0xa0) { + if (mem_size > (16 * 1024 * 1024)) + printk(KERN_WARNING "bcm63xx: this CPU " + "revision cannot handle more than 16MB " + "of RAM for PCI bus mastering\n"); + } else { + /* setup sp0 range to local RAM size */ + bcm_mpi_writel(~(mem_size - 1), MPI_SP0_RANGE_REG); + bcm_mpi_writel(0, MPI_SP1_RANGE_REG); + } + + /* change host bridge retry counter to infinite number of + * retry, needed for some broadcom wifi cards with Silicon + * Backplane bus where access to srom seems very slow */ + val = bcm63xx_int_cfg_readl(BCMPCI_REG_TIMERS); + val &= ~REG_TIMER_RETRY_MASK; + bcm63xx_int_cfg_writel(val, BCMPCI_REG_TIMERS); + + /* enable memory decoder and bus mastering */ + val = bcm63xx_int_cfg_readl(PCI_COMMAND); + val |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); + bcm63xx_int_cfg_writel(val, PCI_COMMAND); + + /* enable read prefetching & disable byte swapping for bus + * mastering transfers */ + val = bcm_mpi_readl(MPI_PCIMODESEL_REG); + val &= ~MPI_PCIMODESEL_BAR1_NOSWAP_MASK; + val &= ~MPI_PCIMODESEL_BAR2_NOSWAP_MASK; + val &= ~MPI_PCIMODESEL_PREFETCH_MASK; + val |= (8 << MPI_PCIMODESEL_PREFETCH_SHIFT); + bcm_mpi_writel(val, MPI_PCIMODESEL_REG); + + /* enable pci interrupt */ + val = bcm_mpi_readl(MPI_LOCINT_REG); + val |= MPI_LOCINT_MASK(MPI_LOCINT_EXT_PCI_INT); + bcm_mpi_writel(val, MPI_LOCINT_REG); + + register_pci_controller(&bcm63xx_controller); + +#ifdef CONFIG_CARDBUS + register_pci_controller(&bcm63xx_cb_controller); +#endif + + /* mark memory space used for IO mapping as reserved */ + request_mem_region(BCM_PCI_IO_BASE_PA, BCM_PCI_IO_SIZE, + "bcm63xx PCI IO space"); + return 0; +} + +arch_initcall(bcm63xx_pci_init); diff --git a/arch/mips/pci/pci-bcm63xx.h b/arch/mips/pci/pci-bcm63xx.h new file mode 100644 index 00000000000..a6e594ef3d6 --- /dev/null +++ b/arch/mips/pci/pci-bcm63xx.h @@ -0,0 +1,27 @@ +#ifndef PCI_BCM63XX_H_ +#define PCI_BCM63XX_H_ + +#include <bcm63xx_cpu.h> +#include <bcm63xx_io.h> +#include <bcm63xx_regs.h> +#include <bcm63xx_dev_pci.h> + +/* + * Cardbus shares the PCI bus, but has no IDSEL, so a special id is + * reserved for it. If you have a standard PCI device at this id, you + * need to change the following definition. + */ +#define CARDBUS_PCI_IDSEL 0x8 + +/* + * defined in ops-bcm63xx.c + */ +extern struct pci_ops bcm63xx_pci_ops; +extern struct pci_ops bcm63xx_cb_ops; + +/* + * defined in pci-bcm63xx.c + */ +extern void __iomem *pci_iospace_start; + +#endif /* ! PCI_BCM63XX_H_ */ diff --git a/arch/mips/pci/pci-sb1250.c b/arch/mips/pci/pci-sb1250.c index bf639590b8b..ada24e6f951 100644 --- a/arch/mips/pci/pci-sb1250.c +++ b/arch/mips/pci/pci-sb1250.c @@ -58,7 +58,7 @@ static void *cfg_space; #define LDT_BUS_ENABLED 2 #define PCI_DEVICE_MODE 4 -static int sb1250_bus_status = 0; +static int sb1250_bus_status; #define PCI_BRIDGE_DEVICE 0 #define LDT_BRIDGE_DEVICE 1 diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c index b0eb9e75c68..9a11c222689 100644 --- a/arch/mips/pci/pci.c +++ b/arch/mips/pci/pci.c @@ -31,8 +31,8 @@ unsigned int pci_probe = PCI_ASSIGN_ALL_BUSSES; static struct pci_controller *hose_head, **hose_tail = &hose_head; -unsigned long PCIBIOS_MIN_IO = 0x0000; -unsigned long PCIBIOS_MIN_MEM = 0; +unsigned long PCIBIOS_MIN_IO; +unsigned long PCIBIOS_MIN_MEM; static int pci_initialized; diff --git a/arch/mips/pmc-sierra/yosemite/setup.c b/arch/mips/pmc-sierra/yosemite/setup.c index 2d3c0dca275..3498ac9c35a 100644 --- a/arch/mips/pmc-sierra/yosemite/setup.c +++ b/arch/mips/pmc-sierra/yosemite/setup.c @@ -70,7 +70,7 @@ void __init bus_error_init(void) } -unsigned long read_persistent_clock(void) +void read_persistent_clock(struct timespec *ts) { unsigned int year, month, day, hour, min, sec; unsigned long flags; @@ -92,7 +92,8 @@ unsigned long read_persistent_clock(void) m48t37_base->control = 0x00; spin_unlock_irqrestore(&rtc_lock, flags); - return mktime(year, month, day, hour, min, sec); + ts->tv_sec = mktime(year, month, day, hour, min, sec); + ts->tv_nsec = 0; } int rtc_mips_set_time(unsigned long tim) diff --git a/arch/mips/pmc-sierra/yosemite/smp.c b/arch/mips/pmc-sierra/yosemite/smp.c index 8ace2771623..326fe7a392e 100644 --- a/arch/mips/pmc-sierra/yosemite/smp.c +++ b/arch/mips/pmc-sierra/yosemite/smp.c @@ -97,11 +97,11 @@ static void yos_send_ipi_single(int cpu, unsigned int action) } } -static void yos_send_ipi_mask(cpumask_t mask, unsigned int action) +static void yos_send_ipi_mask(const struct cpumask *mask, unsigned int action) { unsigned int i; - for_each_cpu_mask(i, mask) + for_each_cpu(i, mask) yos_send_ipi_single(i, action); } diff --git a/arch/mips/power/hibernate.S b/arch/mips/power/hibernate.S index 4b8174b382d..0cf86fb32ec 100644 --- a/arch/mips/power/hibernate.S +++ b/arch/mips/power/hibernate.S @@ -8,6 +8,7 @@ * Wu Zhangjin <wuzj@lemote.com> */ #include <asm/asm-offsets.h> +#include <asm/page.h> #include <asm/regdef.h> #include <asm/asm.h> @@ -34,7 +35,7 @@ LEAF(swsusp_arch_resume) 0: PTR_L t1, PBE_ADDRESS(t0) /* source */ PTR_L t2, PBE_ORIG_ADDRESS(t0) /* destination */ - PTR_ADDIU t3, t1, _PAGE_SIZE + PTR_ADDIU t3, t1, PAGE_SIZE 1: REG_L t8, (t1) REG_S t8, (t2) diff --git a/arch/mips/sgi-ip22/Makefile b/arch/mips/sgi-ip22/Makefile index ef1564e40c8..416b18f9fa7 100644 --- a/arch/mips/sgi-ip22/Makefile +++ b/arch/mips/sgi-ip22/Makefile @@ -10,4 +10,4 @@ obj-$(CONFIG_SGI_IP22) += ip22-berr.o obj-$(CONFIG_SGI_IP28) += ip28-berr.o obj-$(CONFIG_EISA) += ip22-eisa.o -# EXTRA_CFLAGS += -Werror +EXTRA_CFLAGS += -Werror diff --git a/arch/mips/sgi-ip27/ip27-memory.c b/arch/mips/sgi-ip27/ip27-memory.c index 060d853d7b3..f61c164d1e6 100644 --- a/arch/mips/sgi-ip27/ip27-memory.c +++ b/arch/mips/sgi-ip27/ip27-memory.c @@ -421,7 +421,7 @@ static void __init node_mem_init(cnodeid_t node) /* * A node with nothing. We use it to avoid any special casing in - * node_to_cpumask + * cpumask_of_node */ static struct node_data null_node = { .hub = { diff --git a/arch/mips/sgi-ip27/ip27-smp.c b/arch/mips/sgi-ip27/ip27-smp.c index cbcd7eb83bd..9aa8f2951df 100644 --- a/arch/mips/sgi-ip27/ip27-smp.c +++ b/arch/mips/sgi-ip27/ip27-smp.c @@ -165,11 +165,11 @@ static void ip27_send_ipi_single(int destid, unsigned int action) REMOTE_HUB_SEND_INTR(COMPACT_TO_NASID_NODEID(cpu_to_node(destid)), irq); } -static void ip27_send_ipi_mask(cpumask_t mask, unsigned int action) +static void ip27_send_ipi(const struct cpumask *mask, unsigned int action) { unsigned int i; - for_each_cpu_mask(i, mask) + for_each_cpu(i, mask) ip27_send_ipi_single(i, action); } diff --git a/arch/mips/sibyte/bcm1480/smp.c b/arch/mips/sibyte/bcm1480/smp.c index 314691648c9..47b347c992e 100644 --- a/arch/mips/sibyte/bcm1480/smp.c +++ b/arch/mips/sibyte/bcm1480/smp.c @@ -82,11 +82,12 @@ static void bcm1480_send_ipi_single(int cpu, unsigned int action) __raw_writeq((((u64)action)<< 48), mailbox_0_set_regs[cpu]); } -static void bcm1480_send_ipi_mask(cpumask_t mask, unsigned int action) +static void bcm1480_send_ipi_mask(const struct cpumask *mask, + unsigned int action) { unsigned int i; - for_each_cpu_mask(i, mask) + for_each_cpu(i, mask) bcm1480_send_ipi_single(i, action); } diff --git a/arch/mips/sibyte/sb1250/smp.c b/arch/mips/sibyte/sb1250/smp.c index cad14003b84..c00a5cb1128 100644 --- a/arch/mips/sibyte/sb1250/smp.c +++ b/arch/mips/sibyte/sb1250/smp.c @@ -70,11 +70,12 @@ static void sb1250_send_ipi_single(int cpu, unsigned int action) __raw_writeq((((u64)action) << 48), mailbox_set_regs[cpu]); } -static inline void sb1250_send_ipi_mask(cpumask_t mask, unsigned int action) +static inline void sb1250_send_ipi_mask(const struct cpumask *mask, + unsigned int action) { unsigned int i; - for_each_cpu_mask(i, mask) + for_each_cpu(i, mask) sb1250_send_ipi_single(i, action); } diff --git a/arch/mips/sibyte/swarm/setup.c b/arch/mips/sibyte/swarm/setup.c index 672e45d495a..623ffc933c4 100644 --- a/arch/mips/sibyte/swarm/setup.c +++ b/arch/mips/sibyte/swarm/setup.c @@ -87,19 +87,26 @@ enum swarm_rtc_type { enum swarm_rtc_type swarm_rtc_type; -unsigned long read_persistent_clock(void) +void read_persistent_clock(struct timespec *ts) { + unsigned long sec; + switch (swarm_rtc_type) { case RTC_XICOR: - return xicor_get_time(); + sec = xicor_get_time(); + break; case RTC_M4LT81: - return m41t81_get_time(); + sec = m41t81_get_time(); + break; case RTC_NONE: default: - return mktime(2000, 1, 1, 0, 0, 0); + sec = mktime(2000, 1, 1, 0, 0, 0); + break; } + ts->tv_sec = sec; + tv->tv_nsec = 0; } int rtc_mips_set_time(unsigned long sec) diff --git a/arch/mips/sni/time.c b/arch/mips/sni/time.c index 0d9ec1a5c24..62df6a598e0 100644 --- a/arch/mips/sni/time.c +++ b/arch/mips/sni/time.c @@ -182,7 +182,8 @@ void __init plat_time_init(void) setup_pit_timer(); } -unsigned long read_persistent_clock(void) +void read_persistent_clock(struct timespec *ts) { - return -1; + ts->tv_sec = -1; + ts->tv_nsec = 0; } diff --git a/arch/mips/txx9/generic/pci.c b/arch/mips/txx9/generic/pci.c index 7b637a7c0e6..707cfa9c547 100644 --- a/arch/mips/txx9/generic/pci.c +++ b/arch/mips/txx9/generic/pci.c @@ -341,6 +341,15 @@ static void quirk_slc90e66_ide(struct pci_dev *dev) } #endif /* CONFIG_TOSHIBA_FPCIB0 */ +static void tc35815_fixup(struct pci_dev *dev) +{ + /* This device may have PM registers but not they are not suported. */ + if (dev->pm_cap) { + dev_info(&dev->dev, "PM disabled\n"); + dev->pm_cap = 0; + } +} + static void final_fixup(struct pci_dev *dev) { unsigned char bist; @@ -374,6 +383,10 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_1, DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_1, quirk_slc90e66_ide); #endif +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_TOSHIBA_2, + PCI_DEVICE_ID_TOSHIBA_TC35815_NWU, tc35815_fixup); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_TOSHIBA_2, + PCI_DEVICE_ID_TOSHIBA_TC35815_TX4939, tc35815_fixup); DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, final_fixup); DECLARE_PCI_FIXUP_RESUME(PCI_ANY_ID, PCI_ANY_ID, final_fixup); diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c index a205e2ba8e7..c860810722c 100644 --- a/arch/mips/txx9/generic/setup.c +++ b/arch/mips/txx9/generic/setup.c @@ -782,7 +782,7 @@ void __init txx9_iocled_init(unsigned long baseaddr, return; iocled->mmioaddr = ioremap(baseaddr, 1); if (!iocled->mmioaddr) - return; + goto out_free; iocled->chip.get = txx9_iocled_get; iocled->chip.set = txx9_iocled_set; iocled->chip.direction_input = txx9_iocled_dir_in; @@ -791,13 +791,13 @@ void __init txx9_iocled_init(unsigned long baseaddr, iocled->chip.base = basenum; iocled->chip.ngpio = num; if (gpiochip_add(&iocled->chip)) - return; + goto out_unmap; if (basenum < 0) basenum = iocled->chip.base; pdev = platform_device_alloc("leds-gpio", basenum); if (!pdev) - return; + goto out_gpio; iocled->pdata.num_leds = num; iocled->pdata.leds = iocled->leds; for (i = 0; i < num; i++) { @@ -812,7 +812,16 @@ void __init txx9_iocled_init(unsigned long baseaddr, } pdev->dev.platform_data = &iocled->pdata; if (platform_device_add(pdev)) - platform_device_put(pdev); + goto out_pdev; + return; +out_pdev: + platform_device_put(pdev); +out_gpio: + gpio_remove(&iocled->chip); +out_unmap: + iounmap(iocled->mmioaddr); +out_free: + kfree(iocled); } #else /* CONFIG_LEDS_GPIO */ void __init txx9_iocled_init(unsigned long baseaddr, |