summaryrefslogtreecommitdiffstats
path: root/arch/mips
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips')
-rw-r--r--arch/mips/alchemy/common/setup.c34
-rw-r--r--arch/mips/alchemy/devboards/db1x00/board_setup.c28
-rw-r--r--arch/mips/alchemy/devboards/pb1000/board_setup.c10
-rw-r--r--arch/mips/alchemy/devboards/pb1100/board_setup.c27
-rw-r--r--arch/mips/alchemy/devboards/pb1200/board_setup.c24
-rw-r--r--arch/mips/alchemy/devboards/pb1500/board_setup.c18
-rw-r--r--arch/mips/alchemy/devboards/pb1550/board_setup.c12
-rw-r--r--arch/mips/alchemy/mtx-1/board_setup.c12
-rw-r--r--arch/mips/alchemy/xxs1500/board_setup.c12
9 files changed, 136 insertions, 41 deletions
diff --git a/arch/mips/alchemy/common/setup.c b/arch/mips/alchemy/common/setup.c
index 1ac6b06f42a..9889ec3ba4c 100644
--- a/arch/mips/alchemy/common/setup.c
+++ b/arch/mips/alchemy/common/setup.c
@@ -35,7 +35,6 @@
#include <asm/time.h>
#include <au1000.h>
-#include <prom.h>
extern void __init board_setup(void);
extern void au1000_restart(char *);
@@ -46,12 +45,15 @@ extern void set_cpuspec(void);
void __init plat_mem_setup(void)
{
struct cpu_spec *sp;
- char *argptr;
unsigned long prid, cpufreq, bclk;
set_cpuspec();
sp = cur_cpu_spec[0];
+ _machine_restart = au1000_restart;
+ _machine_halt = au1000_halt;
+ pm_power_off = au1000_power_off;
+
board_setup(); /* board specific setup */
prid = read_c0_prid();
@@ -79,34 +81,6 @@ void __init plat_mem_setup(void)
/* Clear to obtain best system bus performance */
clear_c0_config(1 << 19); /* Clear Config[OD] */
- argptr = prom_getcmdline();
-
-#ifdef CONFIG_SERIAL_8250_CONSOLE
- argptr = strstr(argptr, "console=");
- if (argptr == NULL) {
- argptr = prom_getcmdline();
- strcat(argptr, " console=ttyS0,115200");
- }
-#endif
-
-#ifdef CONFIG_FB_AU1100
- argptr = strstr(argptr, "video=");
- if (argptr == NULL) {
- argptr = prom_getcmdline();
- /* default panel */
- /*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/
- }
-#endif
-
-#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000)
- /* au1000 does not support vra, au1500 and au1100 do */
- strcat(argptr, " au1000_audio=vra");
- argptr = prom_getcmdline();
-#endif
- _machine_restart = au1000_restart;
- _machine_halt = au1000_halt;
- pm_power_off = au1000_power_off;
-
/* IO/MEM resources. */
set_io_port_base(0);
ioport_resource.start = IOPORT_RESOURCE_START;
diff --git a/arch/mips/alchemy/devboards/db1x00/board_setup.c b/arch/mips/alchemy/devboards/db1x00/board_setup.c
index 427f799031b..a75ffbf99f2 100644
--- a/arch/mips/alchemy/devboards/db1x00/board_setup.c
+++ b/arch/mips/alchemy/devboards/db1x00/board_setup.c
@@ -32,6 +32,9 @@
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-db1x00/db1x00.h>
+#include <prom.h>
+
+
static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
const char *get_system_type(void)
@@ -52,6 +55,31 @@ void board_reset(void)
void __init board_setup(void)
{
u32 pin_func = 0;
+ char *argptr;
+
+ argptr = prom_getcmdline();
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+ argptr = strstr(argptr, "console=");
+ if (argptr == NULL) {
+ argptr = prom_getcmdline();
+ strcat(argptr, " console=ttyS0,115200");
+ }
+#endif
+
+#ifdef CONFIG_FB_AU1100
+ argptr = strstr(argptr, "video=");
+ if (argptr == NULL) {
+ argptr = prom_getcmdline();
+ /* default panel */
+ /*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/
+ }
+#endif
+
+#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000)
+ /* au1000 does not support vra, au1500 and au1100 do */
+ strcat(argptr, " au1000_audio=vra");
+ argptr = prom_getcmdline();
+#endif
/* Not valid for Au1550 */
#if defined(CONFIG_IRDA) && \
diff --git a/arch/mips/alchemy/devboards/pb1000/board_setup.c b/arch/mips/alchemy/devboards/pb1000/board_setup.c
index b75e487f53e..889c8fda2ab 100644
--- a/arch/mips/alchemy/devboards/pb1000/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1000/board_setup.c
@@ -28,6 +28,7 @@
#include <linux/interrupt.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-pb1x00/pb1000.h>
+#include <prom.h>
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
@@ -52,6 +53,15 @@ void __init board_setup(void)
u32 sys_freqctrl, sys_clksrc;
u32 prid = read_c0_prid();
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+ char *argptr = prom_getcmdline();
+ argptr = strstr(argptr, "console=");
+ if (argptr == NULL) {
+ argptr = prom_getcmdline();
+ strcat(argptr, " console=ttyS0,115200");
+ }
+#endif
+
/* Set AUX clock to 12 MHz * 8 = 96 MHz */
au_writel(8, SYS_AUXPLL);
au_writel(0, SYS_PINSTATERD);
diff --git a/arch/mips/alchemy/devboards/pb1100/board_setup.c b/arch/mips/alchemy/devboards/pb1100/board_setup.c
index 9daab7e2922..fbd211e1348 100644
--- a/arch/mips/alchemy/devboards/pb1100/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1100/board_setup.c
@@ -29,6 +29,8 @@
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-pb1x00/pb1100.h>
+#include <prom.h>
+
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
{ AU1000_GPIO_9, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card Fully_Inserted# */
@@ -54,6 +56,31 @@ void board_reset(void)
void __init board_setup(void)
{
volatile void __iomem *base = (volatile void __iomem *)0xac000000UL;
+ char *argptr;
+
+ argptr = prom_getcmdline();
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+ argptr = strstr(argptr, "console=");
+ if (argptr == NULL) {
+ argptr = prom_getcmdline();
+ strcat(argptr, " console=ttyS0,115200");
+ }
+#endif
+
+#ifdef CONFIG_FB_AU1100
+ argptr = strstr(argptr, "video=");
+ if (argptr == NULL) {
+ argptr = prom_getcmdline();
+ /* default panel */
+ /*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/
+ }
+#endif
+
+#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000)
+ /* au1000 does not support vra, au1500 and au1100 do */
+ strcat(argptr, " au1000_audio=vra");
+ argptr = prom_getcmdline();
+#endif
/* Set AUX clock to 12 MHz * 8 = 96 MHz */
au_writel(8, SYS_AUXPLL);
diff --git a/arch/mips/alchemy/devboards/pb1200/board_setup.c b/arch/mips/alchemy/devboards/pb1200/board_setup.c
index 8f03dc8fdd2..b5585e46200 100644
--- a/arch/mips/alchemy/devboards/pb1200/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1200/board_setup.c
@@ -46,7 +46,19 @@ void board_reset(void)
void __init board_setup(void)
{
- char *argptr = NULL;
+ char *argptr;
+
+ argptr = prom_getcmdline();
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+ argptr = strstr(argptr, "console=");
+ if (argptr == NULL) {
+ argptr = prom_getcmdline();
+ strcat(argptr, " console=ttyS0,115200");
+ }
+#endif
+#ifdef CONFIG_FB_AU1200
+ strcat(argptr, " video=au1200fb:panel:bs");
+#endif
#if 0
{
@@ -104,16 +116,6 @@ void __init board_setup(void)
}
#endif
-#ifdef CONFIG_FB_AU1200
- argptr = prom_getcmdline();
-#ifdef CONFIG_MIPS_PB1200
- strcat(argptr, " video=au1200fb:panel:bs");
-#endif
-#ifdef CONFIG_MIPS_DB1200
- strcat(argptr, " video=au1200fb:panel:bs");
-#endif
-#endif
-
/*
* The Pb1200 development board uses external MUX for PSC0 to
* support SMB/SPI. bcsr->resets bit 12: 0=SMB 1=SPI
diff --git a/arch/mips/alchemy/devboards/pb1500/board_setup.c b/arch/mips/alchemy/devboards/pb1500/board_setup.c
index 47173f1e5ae..dcb36a66442 100644
--- a/arch/mips/alchemy/devboards/pb1500/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1500/board_setup.c
@@ -29,6 +29,8 @@
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-pb1x00/pb1500.h>
+#include <prom.h>
+
char irq_tab_alchemy[][5] __initdata = {
[12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - HPT370 */
@@ -61,6 +63,22 @@ void __init board_setup(void)
{
u32 pin_func;
u32 sys_freqctrl, sys_clksrc;
+ char *argptr;
+
+ argptr = prom_getcmdline();
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+ argptr = strstr(argptr, "console=");
+ if (argptr == NULL) {
+ argptr = prom_getcmdline();
+ strcat(argptr, " console=ttyS0,115200");
+ }
+#endif
+
+#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000)
+ /* au1000 does not support vra, au1500 and au1100 do */
+ strcat(argptr, " au1000_audio=vra");
+ argptr = prom_getcmdline();
+#endif
sys_clksrc = sys_freqctrl = pin_func = 0;
/* Set AUX clock to 12 MHz * 8 = 96 MHz */
diff --git a/arch/mips/alchemy/devboards/pb1550/board_setup.c b/arch/mips/alchemy/devboards/pb1550/board_setup.c
index 25a9190265d..f462652d762 100644
--- a/arch/mips/alchemy/devboards/pb1550/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1550/board_setup.c
@@ -32,6 +32,8 @@
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-pb1x00/pb1550.h>
+#include <prom.h>
+
char irq_tab_alchemy[][5] __initdata = {
[12] = { -1, INTB, INTC, INTD, INTA }, /* IDSEL 12 - PCI slot 2 (left) */
@@ -61,6 +63,16 @@ void __init board_setup(void)
{
u32 pin_func;
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+ char *argptr;
+ argptr = prom_getcmdline();
+ argptr = strstr(argptr, "console=");
+ if (argptr == NULL) {
+ argptr = prom_getcmdline();
+ strcat(argptr, " console=ttyS0,115200");
+ }
+#endif
+
/*
* Enable PSC1 SYNC for AC'97. Normaly done in audio driver,
* but it is board specific code, so put it here.
diff --git a/arch/mips/alchemy/mtx-1/board_setup.c b/arch/mips/alchemy/mtx-1/board_setup.c
index 3f8079186cf..8ed1ae12bc5 100644
--- a/arch/mips/alchemy/mtx-1/board_setup.c
+++ b/arch/mips/alchemy/mtx-1/board_setup.c
@@ -32,6 +32,8 @@
#include <asm/mach-au1x00/au1000.h>
+#include <prom.h>
+
extern int (*board_pci_idsel)(unsigned int devsel, int assert);
int mtx1_pci_idsel(unsigned int devsel, int assert);
@@ -43,6 +45,16 @@ void board_reset(void)
void __init board_setup(void)
{
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+ char *argptr;
+ argptr = prom_getcmdline();
+ argptr = strstr(argptr, "console=");
+ if (argptr == NULL) {
+ argptr = prom_getcmdline();
+ strcat(argptr, " console=ttyS0,115200");
+ }
+#endif
+
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
/* Enable USB power switch */
au_writel(au_readl(GPIO2_DIR) | 0x10, GPIO2_DIR);
diff --git a/arch/mips/alchemy/xxs1500/board_setup.c b/arch/mips/alchemy/xxs1500/board_setup.c
index 4c587acac5c..a2634fabc50 100644
--- a/arch/mips/alchemy/xxs1500/board_setup.c
+++ b/arch/mips/alchemy/xxs1500/board_setup.c
@@ -28,6 +28,8 @@
#include <asm/mach-au1x00/au1000.h>
+#include <prom.h>
+
void board_reset(void)
{
/* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
@@ -38,6 +40,16 @@ void __init board_setup(void)
{
u32 pin_func;
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+ char *argptr;
+ argptr = prom_getcmdline();
+ argptr = strstr(argptr, "console=");
+ if (argptr == NULL) {
+ argptr = prom_getcmdline();
+ strcat(argptr, " console=ttyS0,115200");
+ }
+#endif
+
/* Set multiple use pins (UART3/GPIO) to UART (it's used as UART too) */
pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_UR3;
pin_func |= SYS_PF_UR3;