diff options
Diffstat (limited to 'arch/mips')
244 files changed, 13426 insertions, 5314 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 387a7c5bb89..0c55582a49c 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -759,7 +759,6 @@ config NLM_XLR_BOARD depends on EXPERIMENTAL select BOOT_ELF32 select NLM_COMMON - select NLM_XLR select SYS_HAS_CPU_XLR select SYS_SUPPORTS_SMP select HW_HAS_PCI @@ -774,6 +773,7 @@ config NLM_XLR_BOARD select CEVT_R4K select CSRC_R4K select IRQ_CPU + select ARCH_SUPPORTS_MSI select ZONE_DMA if 64BIT select SYNC_R4K select SYS_HAS_EARLY_PRINTK @@ -781,6 +781,33 @@ config NLM_XLR_BOARD Support for systems based on Netlogic XLR and XLS processors. Say Y here if you have a XLR or XLS based board. +config NLM_XLP_BOARD + bool "Netlogic XLP based systems" + depends on EXPERIMENTAL + select BOOT_ELF32 + select NLM_COMMON + select SYS_HAS_CPU_XLP + select SYS_SUPPORTS_SMP + select HW_HAS_PCI + select SWAP_IO_SPACE + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL + select 64BIT_PHYS_ADDR + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_SUPPORTS_HIGHMEM + select DMA_COHERENT + select NR_CPUS_DEFAULT_32 + select CEVT_R4K + select CSRC_R4K + select IRQ_CPU + select ZONE_DMA if 64BIT + select SYNC_R4K + select SYS_HAS_EARLY_PRINTK + help + This board is based on Netlogic XLP Processor. + Say Y here if you have a XLP based board. + endchoice source "arch/mips/alchemy/Kconfig" @@ -1411,51 +1438,36 @@ config CPU_CAVIUM_OCTEON config CPU_BMIPS3300 bool "BMIPS3300" depends on SYS_HAS_CPU_BMIPS3300 - select DMA_NONCOHERENT - select IRQ_CPU - select SWAP_IO_SPACE - select SYS_SUPPORTS_32BIT_KERNEL - select WEAK_ORDERING + select CPU_BMIPS help Broadcom BMIPS3300 processors. config CPU_BMIPS4350 bool "BMIPS4350" depends on SYS_HAS_CPU_BMIPS4350 - select CPU_SUPPORTS_32BIT_KERNEL - select DMA_NONCOHERENT - select IRQ_CPU - select SWAP_IO_SPACE + select CPU_BMIPS select SYS_SUPPORTS_SMP select SYS_SUPPORTS_HOTPLUG_CPU - select WEAK_ORDERING help Broadcom BMIPS4350 ("VIPER") processors. config CPU_BMIPS4380 bool "BMIPS4380" depends on SYS_HAS_CPU_BMIPS4380 - select CPU_SUPPORTS_32BIT_KERNEL - select DMA_NONCOHERENT - select IRQ_CPU - select SWAP_IO_SPACE + select CPU_BMIPS select SYS_SUPPORTS_SMP select SYS_SUPPORTS_HOTPLUG_CPU - select WEAK_ORDERING help Broadcom BMIPS4380 processors. config CPU_BMIPS5000 bool "BMIPS5000" depends on SYS_HAS_CPU_BMIPS5000 - select CPU_SUPPORTS_32BIT_KERNEL + select CPU_BMIPS select CPU_SUPPORTS_HIGHMEM - select DMA_NONCOHERENT - select IRQ_CPU - select SWAP_IO_SPACE + select MIPS_CPU_SCACHE select SYS_SUPPORTS_SMP select SYS_SUPPORTS_HOTPLUG_CPU - select WEAK_ORDERING help Broadcom BMIPS5000 processors. @@ -1470,6 +1482,19 @@ config CPU_XLR select CPU_SUPPORTS_HUGEPAGES help Netlogic Microsystems XLR/XLS processors. + +config CPU_XLP + bool "Netlogic XLP SoC" + depends on SYS_HAS_CPU_XLP + select CPU_SUPPORTS_32BIT_KERNEL + select CPU_SUPPORTS_64BIT_KERNEL + select CPU_SUPPORTS_HIGHMEM + select CPU_HAS_LLSC + select WEAK_ORDERING + select WEAK_REORDERING_BEYOND_LLSC + select CPU_HAS_PREFETCH + help + Netlogic Microsystems XLP processors. endchoice if CPU_LOONGSON2F @@ -1516,6 +1541,15 @@ config CPU_LOONGSON2 select CPU_SUPPORTS_64BIT_KERNEL select CPU_SUPPORTS_HIGHMEM +config CPU_BMIPS + bool + select CPU_MIPS32 + select CPU_SUPPORTS_32BIT_KERNEL + select DMA_NONCOHERENT + select IRQ_CPU + select SWAP_IO_SPACE + select WEAK_ORDERING + config SYS_HAS_CPU_LOONGSON2E bool @@ -1603,6 +1637,9 @@ config SYS_HAS_CPU_BMIPS5000 config SYS_HAS_CPU_XLR bool +config SYS_HAS_CPU_XLP + bool + # # CPU may reorder R->R, R->W, W->R, W->W # Reordering beyond LL and SC is handled in WEAK_REORDERING_BEYOND_LLSC @@ -1990,6 +2027,9 @@ config CPU_HAS_SMARTMIPS config CPU_HAS_WB bool +config XKS01 + bool + # # Vectored interrupt mode is an R2 feature # diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 0be318609fc..4fedf5a51d9 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -157,6 +157,7 @@ ifeq (,$(findstring march=octeon, $(cflags-$(CONFIG_CPU_CAVIUM_OCTEON)))) cflags-$(CONFIG_CPU_CAVIUM_OCTEON) += -Wa,-march=octeon endif cflags-$(CONFIG_CAVIUM_CN63XXP1) += -Wa,-mfix-cn63xxp1 +cflags-$(CONFIG_CPU_BMIPS) += -march=mips32 -Wa,-mips32 -Wa,--trap cflags-$(CONFIG_CPU_R4000_WORKAROUNDS) += $(call cc-option,-mfix-r4000,) cflags-$(CONFIG_CPU_R4400_WORKAROUNDS) += $(call cc-option,-mfix-r4400,) diff --git a/arch/mips/alchemy/Kconfig b/arch/mips/alchemy/Kconfig index 2a68be6a1b9..0faaab24376 100644 --- a/arch/mips/alchemy/Kconfig +++ b/arch/mips/alchemy/Kconfig @@ -2,6 +2,10 @@ config ALCHEMY_GPIOINT_AU1000 bool +# au1300-style GPIO/INT controller +config ALCHEMY_GPIOINT_AU1300 + bool + # select this in your board config if you don't want to use the gpio # namespace as documented in the manuals. In this case however you need # to create the necessary gpio_* functions in your board code/headers! @@ -22,43 +26,29 @@ config MIPS_MTX1 select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_HAS_EARLY_PRINTK -config MIPS_BOSPORUS - bool "Alchemy Bosporus board" - select ALCHEMY_GPIOINT_AU1000 - select DMA_NONCOHERENT - select SYS_SUPPORTS_LITTLE_ENDIAN - select SYS_HAS_EARLY_PRINTK - config MIPS_DB1000 - bool "Alchemy DB1000 board" + bool "Alchemy DB1000/DB1500/DB1100 boards" select ALCHEMY_GPIOINT_AU1000 select DMA_NONCOHERENT select HW_HAS_PCI - select SYS_SUPPORTS_LITTLE_ENDIAN - select SYS_HAS_EARLY_PRINTK - -config MIPS_DB1100 - bool "Alchemy DB1100 board" - select ALCHEMY_GPIOINT_AU1000 - select DMA_NONCOHERENT + select MIPS_DISABLE_OBSOLETE_IDE + select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_HAS_EARLY_PRINTK config MIPS_DB1200 - bool "Alchemy DB1200 board" + bool "Alchemy DB1200/PB1200 board" select ALCHEMY_GPIOINT_AU1000 select DMA_COHERENT select MIPS_DISABLE_OBSOLETE_IDE select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_HAS_EARLY_PRINTK -config MIPS_DB1500 - bool "Alchemy DB1500 board" - select ALCHEMY_GPIOINT_AU1000 - select DMA_NONCOHERENT - select HW_HAS_PCI +config MIPS_DB1300 + bool "NetLogic DB1300 board" + select ALCHEMY_GPIOINT_AU1300 + select DMA_COHERENT select MIPS_DISABLE_OBSOLETE_IDE - select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_HAS_EARLY_PRINTK @@ -66,27 +56,11 @@ config MIPS_DB1550 bool "Alchemy DB1550 board" select ALCHEMY_GPIOINT_AU1000 select HW_HAS_PCI - select DMA_NONCOHERENT + select DMA_COHERENT select MIPS_DISABLE_OBSOLETE_IDE select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_HAS_EARLY_PRINTK -config MIPS_MIRAGE - bool "Alchemy Mirage board" - select DMA_NONCOHERENT - select ALCHEMY_GPIOINT_AU1000 - select SYS_SUPPORTS_LITTLE_ENDIAN - select SYS_HAS_EARLY_PRINTK - -config MIPS_PB1000 - bool "Alchemy PB1000 board" - select ALCHEMY_GPIOINT_AU1000 - select DMA_NONCOHERENT - select HW_HAS_PCI - select SWAP_IO_SPACE - select SYS_SUPPORTS_LITTLE_ENDIAN - select SYS_HAS_EARLY_PRINTK - config MIPS_PB1100 bool "Alchemy PB1100 board" select ALCHEMY_GPIOINT_AU1000 @@ -96,14 +70,6 @@ config MIPS_PB1100 select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_HAS_EARLY_PRINTK -config MIPS_PB1200 - bool "Alchemy PB1200 board" - select ALCHEMY_GPIOINT_AU1000 - select DMA_NONCOHERENT - select MIPS_DISABLE_OBSOLETE_IDE - select SYS_SUPPORTS_LITTLE_ENDIAN - select SYS_HAS_EARLY_PRINTK - config MIPS_PB1500 bool "Alchemy PB1500 board" select ALCHEMY_GPIOINT_AU1000 diff --git a/arch/mips/alchemy/Makefile b/arch/mips/alchemy/Makefile new file mode 100644 index 00000000000..aac3b179bbc --- /dev/null +++ b/arch/mips/alchemy/Makefile @@ -0,0 +1,3 @@ +obj-$(CONFIG_MIPS_GPR) += board-gpr.o +obj-$(CONFIG_MIPS_MTX1) += board-mtx1.o +obj-$(CONFIG_MIPS_XXS1500) += board-xxs1500.o diff --git a/arch/mips/alchemy/Platform b/arch/mips/alchemy/Platform index 96e9e41f1b2..7956274de15 100644 --- a/arch/mips/alchemy/Platform +++ b/arch/mips/alchemy/Platform @@ -5,62 +5,31 @@ platform-$(CONFIG_MIPS_ALCHEMY) += alchemy/common/ # -# AMD Alchemy Pb1000 eval board -# -platform-$(CONFIG_MIPS_PB1000) += alchemy/devboards/ -cflags-$(CONFIG_MIPS_PB1000) += -I$(srctree)/arch/mips/include/asm/mach-pb1x00 -load-$(CONFIG_MIPS_PB1000) += 0xffffffff80100000 - -# # AMD Alchemy Pb1100 eval board # platform-$(CONFIG_MIPS_PB1100) += alchemy/devboards/ -cflags-$(CONFIG_MIPS_PB1100) += -I$(srctree)/arch/mips/include/asm/mach-pb1x00 load-$(CONFIG_MIPS_PB1100) += 0xffffffff80100000 # # AMD Alchemy Pb1500 eval board # platform-$(CONFIG_MIPS_PB1500) += alchemy/devboards/ -cflags-$(CONFIG_MIPS_PB1500) += -I$(srctree)/arch/mips/include/asm/mach-pb1x00 load-$(CONFIG_MIPS_PB1500) += 0xffffffff80100000 # # AMD Alchemy Pb1550 eval board # platform-$(CONFIG_MIPS_PB1550) += alchemy/devboards/ -cflags-$(CONFIG_MIPS_PB1550) += -I$(srctree)/arch/mips/include/asm/mach-pb1x00 load-$(CONFIG_MIPS_PB1550) += 0xffffffff80100000 # -# AMD Alchemy Pb1200 eval board -# -platform-$(CONFIG_MIPS_PB1200) += alchemy/devboards/ -cflags-$(CONFIG_MIPS_PB1200) += -I$(srctree)/arch/mips/include/asm/mach-pb1x00 -load-$(CONFIG_MIPS_PB1200) += 0xffffffff80100000 - -# -# AMD Alchemy Db1000 eval board +# AMD Alchemy Db1000/Db1500/Db1100 eval boards # platform-$(CONFIG_MIPS_DB1000) += alchemy/devboards/ cflags-$(CONFIG_MIPS_DB1000) += -I$(srctree)/arch/mips/include/asm/mach-db1x00 load-$(CONFIG_MIPS_DB1000) += 0xffffffff80100000 # -# AMD Alchemy Db1100 eval board -# -platform-$(CONFIG_MIPS_DB1100) += alchemy/devboards/ -cflags-$(CONFIG_MIPS_DB1100) += -I$(srctree)/arch/mips/include/asm/mach-db1x00 -load-$(CONFIG_MIPS_DB1100) += 0xffffffff80100000 - -# -# AMD Alchemy Db1500 eval board -# -platform-$(CONFIG_MIPS_DB1500) += alchemy/devboards/ -cflags-$(CONFIG_MIPS_DB1500) += -I$(srctree)/arch/mips/include/asm/mach-db1x00 -load-$(CONFIG_MIPS_DB1500) += 0xffffffff80100000 - -# # AMD Alchemy Db1550 eval board # platform-$(CONFIG_MIPS_DB1550) += alchemy/devboards/ @@ -68,42 +37,35 @@ cflags-$(CONFIG_MIPS_DB1550) += -I$(srctree)/arch/mips/include/asm/mach-db1x00 load-$(CONFIG_MIPS_DB1550) += 0xffffffff80100000 # -# AMD Alchemy Db1200 eval board +# AMD Alchemy Db1200/Pb1200 eval boards # platform-$(CONFIG_MIPS_DB1200) += alchemy/devboards/ cflags-$(CONFIG_MIPS_DB1200) += -I$(srctree)/arch/mips/include/asm/mach-db1x00 load-$(CONFIG_MIPS_DB1200) += 0xffffffff80100000 # -# AMD Alchemy Bosporus eval board -# -platform-$(CONFIG_MIPS_BOSPORUS) += alchemy/devboards/ -cflags-$(CONFIG_MIPS_BOSPORUS) += -I$(srctree)/arch/mips/include/asm/mach-db1x00 -load-$(CONFIG_MIPS_BOSPORUS) += 0xffffffff80100000 - -# -# AMD Alchemy Mirage eval board +# NetLogic DBAu1300 development platform # -platform-$(CONFIG_MIPS_MIRAGE) += alchemy/devboards/ -cflags-$(CONFIG_MIPS_MIRAGE) += -I$(srctree)/arch/mips/include/asm/mach-db1x00 -load-$(CONFIG_MIPS_MIRAGE) += 0xffffffff80100000 +platform-$(CONFIG_MIPS_DB1300) += alchemy/devboards/ +cflags-$(CONFIG_MIPS_DB1300) += -I$(srctree)/arch/mips/include/asm/mach-db1x00 +load-$(CONFIG_MIPS_DB1300) += 0xffffffff80100000 # -# 4G-Systems eval board +# 4G-Systems MTX-1 "MeshCube" wireless router # -platform-$(CONFIG_MIPS_MTX1) += alchemy/mtx-1/ +platform-$(CONFIG_MIPS_MTX1) += alchemy/ load-$(CONFIG_MIPS_MTX1) += 0xffffffff80100000 # # MyCable eval board # -platform-$(CONFIG_MIPS_XXS1500) += alchemy/xxs1500/ +platform-$(CONFIG_MIPS_XXS1500) += alchemy/ load-$(CONFIG_MIPS_XXS1500) += 0xffffffff80100000 # # Trapeze ITS GRP board # -platform-$(CONFIG_MIPS_GPR) += alchemy/gpr/ +platform-$(CONFIG_MIPS_GPR) += alchemy/ load-$(CONFIG_MIPS_GPR) += 0xffffffff80100000 # boards can specify their own <gpio.h> in one of their include dirs. diff --git a/arch/mips/alchemy/gpr/platform.c b/arch/mips/alchemy/board-gpr.c index 982ce85db60..ba3259086b9 100644 --- a/arch/mips/alchemy/gpr/platform.c +++ b/arch/mips/alchemy/board-gpr.c @@ -1,5 +1,5 @@ /* - * GPR board platform device registration + * GPR board platform device registration (Au1550) * * Copyright (C) 2010 Wolfgang Grandegger <wg@denx.de> * @@ -18,16 +18,89 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#include <linux/delay.h> #include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> #include <linux/platform_device.h> +#include <linux/pm.h> #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> #include <linux/leds.h> #include <linux/gpio.h> #include <linux/i2c.h> #include <linux/i2c-gpio.h> - +#include <asm/bootinfo.h> +#include <asm/reboot.h> #include <asm/mach-au1x00/au1000.h> +#include <prom.h> + +const char *get_system_type(void) +{ + return "GPR"; +} + +void __init prom_init(void) +{ + unsigned char *memsize_str; + unsigned long memsize; + + prom_argc = fw_arg0; + prom_argv = (char **)fw_arg1; + prom_envp = (char **)fw_arg2; + + prom_init_cmdline(); + + memsize_str = prom_getenv("memsize"); + if (!memsize_str) + memsize = 0x04000000; + else + strict_strtoul(memsize_str, 0, &memsize); + add_memory_region(0, memsize, BOOT_MEM_RAM); +} + +void prom_putchar(unsigned char c) +{ + alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c); +} + +static void gpr_reset(char *c) +{ + /* switch System-LED to orange (red# and green# on) */ + alchemy_gpio_direction_output(4, 0); + alchemy_gpio_direction_output(5, 0); + + /* trigger watchdog to reset board in 200ms */ + printk(KERN_EMERG "Triggering watchdog soft reset...\n"); + raw_local_irq_disable(); + alchemy_gpio_direction_output(1, 0); + udelay(1); + alchemy_gpio_set_value(1, 1); + while (1) + cpu_wait(); +} + +static void gpr_power_off(void) +{ + while (1) + cpu_wait(); +} + +void __init board_setup(void) +{ + printk(KERN_INFO "Trapeze ITS GPR board\n"); + + pm_power_off = gpr_power_off; + _machine_halt = gpr_power_off; + _machine_restart = gpr_reset; + + /* Enable UART1/3 */ + alchemy_uart_enable(AU1000_UART3_PHYS_ADDR); + alchemy_uart_enable(AU1000_UART1_PHYS_ADDR); + + /* Take away Reset of UMTS-card */ + alchemy_gpio_direction_output(215, 1); +} /* * Watchdog @@ -152,7 +225,7 @@ static struct i2c_gpio_platform_data gpr_i2c_data = { .scl_is_open_drain = 1, .udelay = 2, /* ~100 kHz */ .timeout = HZ, - }; +}; static struct platform_device gpr_i2c_device = { .name = "i2c-gpio", @@ -184,7 +257,7 @@ static int gpr_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin) else if ((slot == 0) && (pin == 2)) return AU1550_PCI_INTB; - return -1; + return 0xff; } static struct alchemy_pci_platdata gpr_pci_pd = { diff --git a/arch/mips/alchemy/mtx-1/platform.c b/arch/mips/alchemy/board-mtx1.c index cc47b6868ca..295f1a95f74 100644 --- a/arch/mips/alchemy/mtx-1/platform.c +++ b/arch/mips/alchemy/board-mtx1.c @@ -1,5 +1,5 @@ /* - * MTX-1 platform devices registration + * MTX-1 platform devices registration (Au1500) * * Copyright (C) 2007-2009, Florian Fainelli <florian@openwrt.org> * @@ -19,6 +19,8 @@ */ #include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/leds.h> #include <linux/gpio.h> @@ -27,8 +29,85 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> #include <mtd/mtd-abi.h> - +#include <asm/bootinfo.h> +#include <asm/reboot.h> +#include <asm/mach-au1x00/au1000.h> #include <asm/mach-au1x00/au1xxx_eth.h> +#include <prom.h> + +const char *get_system_type(void) +{ + return "MTX-1"; +} + +void __init prom_init(void) +{ + unsigned char *memsize_str; + unsigned long memsize; + + prom_argc = fw_arg0; + prom_argv = (char **)fw_arg1; + prom_envp = (char **)fw_arg2; + + prom_init_cmdline(); + + memsize_str = prom_getenv("memsize"); + if (!memsize_str) + memsize = 0x04000000; + else + strict_strtoul(memsize_str, 0, &memsize); + add_memory_region(0, memsize, BOOT_MEM_RAM); +} + +void prom_putchar(unsigned char c) +{ + alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c); +} + +static void mtx1_reset(char *c) +{ + /* Jump to the reset vector */ + __asm__ __volatile__("jr\t%0" : : "r"(0xbfc00000)); +} + +static void mtx1_power_off(void) +{ + while (1) + asm volatile ( + " .set mips32 \n" + " wait \n" + " .set mips0 \n"); +} + +void __init board_setup(void) +{ +#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) + /* Enable USB power switch */ + alchemy_gpio_direction_output(204, 0); +#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */ + + /* Initialize sys_pinfunc */ + au_writel(SYS_PF_NI2, SYS_PINFUNC); + + /* Initialize GPIO */ + au_writel(~0, KSEG1ADDR(AU1000_SYS_PHYS_ADDR) + SYS_TRIOUTCLR); + alchemy_gpio_direction_output(0, 0); /* Disable M66EN (PCI 66MHz) */ + alchemy_gpio_direction_output(3, 1); /* Disable PCI CLKRUN# */ + alchemy_gpio_direction_output(1, 1); /* Enable EXT_IO3 */ + alchemy_gpio_direction_output(5, 0); /* Disable eth PHY TX_ER */ + + /* Enable LED and set it to green */ + alchemy_gpio_direction_output(211, 1); /* green on */ + alchemy_gpio_direction_output(212, 0); /* red off */ + + pm_power_off = mtx1_power_off; + _machine_halt = mtx1_power_off; + _machine_restart = mtx1_reset; + + printk(KERN_INFO "4G Systems MTX-1 Board\n"); +} + +/******************************************************************************/ static struct gpio_keys_button mtx1_gpio_button[] = { { @@ -195,7 +274,6 @@ static struct platform_device mtx1_pci_host = { .resource = alchemy_pci_host_res, }; - static struct __initdata platform_device * mtx1_devs[] = { &mtx1_pci_host, &mtx1_gpio_leds, @@ -206,13 +284,19 @@ static struct __initdata platform_device * mtx1_devs[] = { static struct au1000_eth_platform_data mtx1_au1000_eth0_pdata = { .phy_search_highest_addr = 1, - .phy1_search_mac0 = 1, + .phy1_search_mac0 = 1, }; static int __init mtx1_register_devices(void) { int rc; + irq_set_irq_type(AU1500_GPIO204_INT, IRQ_TYPE_LEVEL_HIGH); + irq_set_irq_type(AU1500_GPIO201_INT, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(AU1500_GPIO202_INT, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(AU1500_GPIO203_INT, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(AU1500_GPIO205_INT, IRQ_TYPE_LEVEL_LOW); + au1xxx_override_eth_cfg(0, &mtx1_au1000_eth0_pdata); rc = gpio_request(mtx1_gpio_button[0].gpio, @@ -226,5 +310,4 @@ static int __init mtx1_register_devices(void) out: return platform_add_devices(mtx1_devs, ARRAY_SIZE(mtx1_devs)); } - arch_initcall(mtx1_register_devices); diff --git a/arch/mips/alchemy/board-xxs1500.c b/arch/mips/alchemy/board-xxs1500.c new file mode 100644 index 00000000000..bd551365029 --- /dev/null +++ b/arch/mips/alchemy/board-xxs1500.c @@ -0,0 +1,154 @@ +/* + * BRIEF MODULE DESCRIPTION + * MyCable XXS1500 board support + * + * Copyright 2003, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/delay.h> +#include <linux/pm.h> +#include <asm/bootinfo.h> +#include <asm/reboot.h> +#include <asm/mach-au1x00/au1000.h> +#include <prom.h> + +const char *get_system_type(void) +{ + return "XXS1500"; +} + +void __init prom_init(void) +{ + unsigned char *memsize_str; + unsigned long memsize; + + prom_argc = fw_arg0; + prom_argv = (char **)fw_arg1; + prom_envp = (char **)fw_arg2; + + prom_init_cmdline(); + + memsize_str = prom_getenv("memsize"); + if (!memsize_str || strict_strtoul(memsize_str, 0, &memsize)) + memsize = 0x04000000; + + add_memory_region(0, memsize, BOOT_MEM_RAM); +} + +void prom_putchar(unsigned char c) +{ + alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c); +} + +static void xxs1500_reset(char *c) +{ + /* Jump to the reset vector */ + __asm__ __volatile__("jr\t%0" : : "r"(0xbfc00000)); +} + +static void xxs1500_power_off(void) +{ + while (1) + asm volatile ( + " .set mips32 \n" + " wait \n" + " .set mips0 \n"); +} + +void __init board_setup(void) +{ + u32 pin_func; + + pm_power_off = xxs1500_power_off; + _machine_halt = xxs1500_power_off; + _machine_restart = xxs1500_reset; + + alchemy_gpio1_input_enable(); + alchemy_gpio2_enable(); + + /* Set multiple use pins (UART3/GPIO) to UART (it's used as UART too) */ + pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_UR3; + pin_func |= SYS_PF_UR3; + au_writel(pin_func, SYS_PINFUNC); + + /* Enable UART */ + alchemy_uart_enable(AU1000_UART3_PHYS_ADDR); + /* Enable DTR (MCR bit 0) = USB power up */ + __raw_writel(1, (void __iomem *)KSEG1ADDR(AU1000_UART3_PHYS_ADDR + 0x18)); + wmb(); +} + +/******************************************************************************/ + +static struct resource xxs1500_pcmcia_res[] = { + { + .name = "pcmcia-io", + .flags = IORESOURCE_MEM, + .start = AU1000_PCMCIA_IO_PHYS_ADDR, + .end = AU1000_PCMCIA_IO_PHYS_ADDR + 0x000400000 - 1, + }, + { + .name = "pcmcia-attr", + .flags = IORESOURCE_MEM, + .start = AU1000_PCMCIA_ATTR_PHYS_ADDR, + .end = AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, + }, + { + .name = "pcmcia-mem", + .flags = IORESOURCE_MEM, + .start = AU1000_PCMCIA_MEM_PHYS_ADDR, + .end = AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, + }, +}; + +static struct platform_device xxs1500_pcmcia_dev = { + .name = "xxs1500_pcmcia", + .id = -1, + .num_resources = ARRAY_SIZE(xxs1500_pcmcia_res), + .resource = xxs1500_pcmcia_res, +}; + +static struct platform_device *xxs1500_devs[] __initdata = { + &xxs1500_pcmcia_dev, +}; + +static int __init xxs1500_dev_init(void) +{ + irq_set_irq_type(AU1500_GPIO204_INT, IRQ_TYPE_LEVEL_HIGH); + irq_set_irq_type(AU1500_GPIO201_INT, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(AU1500_GPIO202_INT, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(AU1500_GPIO203_INT, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(AU1500_GPIO205_INT, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(AU1500_GPIO207_INT, IRQ_TYPE_LEVEL_LOW); + + irq_set_irq_type(AU1500_GPIO0_INT, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(AU1500_GPIO1_INT, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(AU1500_GPIO2_INT, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(AU1500_GPIO3_INT, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(AU1500_GPIO4_INT, IRQ_TYPE_LEVEL_LOW); /* CF irq */ + irq_set_irq_type(AU1500_GPIO5_INT, IRQ_TYPE_LEVEL_LOW); + + return platform_add_devices(xxs1500_devs, + ARRAY_SIZE(xxs1500_devs)); +} +device_initcall(xxs1500_dev_init); diff --git a/arch/mips/alchemy/common/Makefile b/arch/mips/alchemy/common/Makefile index 811ece7b22e..407ebc00e66 100644 --- a/arch/mips/alchemy/common/Makefile +++ b/arch/mips/alchemy/common/Makefile @@ -6,9 +6,7 @@ # obj-y += prom.o time.o clocks.o platform.o power.o setup.o \ - sleeper.o dma.o dbdma.o - -obj-$(CONFIG_ALCHEMY_GPIOINT_AU1000) += irq.o + sleeper.o dma.o dbdma.o vss.o irq.o # optional gpiolib support ifeq ($(CONFIG_ALCHEMY_GPIO_INDIRECT),) diff --git a/arch/mips/alchemy/common/dbdma.c b/arch/mips/alchemy/common/dbdma.c index 0e63ee487d6..cf02d7dc2df 100644 --- a/arch/mips/alchemy/common/dbdma.c +++ b/arch/mips/alchemy/common/dbdma.c @@ -148,6 +148,50 @@ static dbdev_tab_t au1200_dbdev_tab[] __initdata = { { DSCR_CMD0_ALWAYS, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, }; +static dbdev_tab_t au1300_dbdev_tab[] __initdata = { + { AU1300_DSCR_CMD0_UART0_TX, DEV_FLAGS_OUT, 0, 8, 0x10100004, 0, 0 }, + { AU1300_DSCR_CMD0_UART0_RX, DEV_FLAGS_IN, 0, 8, 0x10100000, 0, 0 }, + { AU1300_DSCR_CMD0_UART1_TX, DEV_FLAGS_OUT, 0, 8, 0x10101004, 0, 0 }, + { AU1300_DSCR_CMD0_UART1_RX, DEV_FLAGS_IN, 0, 8, 0x10101000, 0, 0 }, + { AU1300_DSCR_CMD0_UART2_TX, DEV_FLAGS_OUT, 0, 8, 0x10102004, 0, 0 }, + { AU1300_DSCR_CMD0_UART2_RX, DEV_FLAGS_IN, 0, 8, 0x10102000, 0, 0 }, + { AU1300_DSCR_CMD0_UART3_TX, DEV_FLAGS_OUT, 0, 8, 0x10103004, 0, 0 }, + { AU1300_DSCR_CMD0_UART3_RX, DEV_FLAGS_IN, 0, 8, 0x10103000, 0, 0 }, + + { AU1300_DSCR_CMD0_SDMS_TX0, DEV_FLAGS_OUT, 4, 8, 0x10600000, 0, 0 }, + { AU1300_DSCR_CMD0_SDMS_RX0, DEV_FLAGS_IN, 4, 8, 0x10600004, 0, 0 }, + { AU1300_DSCR_CMD0_SDMS_TX1, DEV_FLAGS_OUT, 8, 8, 0x10601000, 0, 0 }, + { AU1300_DSCR_CMD0_SDMS_RX1, DEV_FLAGS_IN, 8, 8, 0x10601004, 0, 0 }, + + { AU1300_DSCR_CMD0_AES_RX, DEV_FLAGS_IN , 4, 32, 0x10300008, 0, 0 }, + { AU1300_DSCR_CMD0_AES_TX, DEV_FLAGS_OUT, 4, 32, 0x10300004, 0, 0 }, + + { AU1300_DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT, 0, 16, 0x10a0001c, 0, 0 }, + { AU1300_DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN, 0, 16, 0x10a0001c, 0, 0 }, + { AU1300_DSCR_CMD0_PSC1_TX, DEV_FLAGS_OUT, 0, 16, 0x10a0101c, 0, 0 }, + { AU1300_DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN, 0, 16, 0x10a0101c, 0, 0 }, + { AU1300_DSCR_CMD0_PSC2_TX, DEV_FLAGS_OUT, 0, 16, 0x10a0201c, 0, 0 }, + { AU1300_DSCR_CMD0_PSC2_RX, DEV_FLAGS_IN, 0, 16, 0x10a0201c, 0, 0 }, + { AU1300_DSCR_CMD0_PSC3_TX, DEV_FLAGS_OUT, 0, 16, 0x10a0301c, 0, 0 }, + { AU1300_DSCR_CMD0_PSC3_RX, DEV_FLAGS_IN, 0, 16, 0x10a0301c, 0, 0 }, + + { AU1300_DSCR_CMD0_LCD, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, + { AU1300_DSCR_CMD0_NAND_FLASH, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 }, + + { AU1300_DSCR_CMD0_SDMS_TX2, DEV_FLAGS_OUT, 4, 8, 0x10602000, 0, 0 }, + { AU1300_DSCR_CMD0_SDMS_RX2, DEV_FLAGS_IN, 4, 8, 0x10602004, 0, 0 }, + + { AU1300_DSCR_CMD0_CIM_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, + + { AU1300_DSCR_CMD0_UDMA, DEV_FLAGS_ANYUSE, 0, 32, 0x14001810, 0, 0 }, + + { AU1300_DSCR_CMD0_DMA_REQ0, 0, 0, 0, 0x00000000, 0, 0 }, + { AU1300_DSCR_CMD0_DMA_REQ1, 0, 0, 0, 0x00000000, 0, 0 }, + + { DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, + { DSCR_CMD0_ALWAYS, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, +}; + /* 32 predefined plus 32 custom */ #define DBDEV_TAB_SIZE 64 @@ -1019,8 +1063,7 @@ static int __init dbdma_setup(unsigned int irq, dbdev_tab_t *idtable) dbdma_gptr->ddma_inten = 0xffff; au_sync(); - ret = request_irq(irq, dbdma_interrupt, IRQF_DISABLED, "dbdma", - (void *)dbdma_gptr); + ret = request_irq(irq, dbdma_interrupt, 0, "dbdma", (void *)dbdma_gptr); if (ret) printk(KERN_ERR "Cannot grab DBDMA interrupt!\n"); else { @@ -1038,6 +1081,8 @@ static int __init alchemy_dbdma_init(void) return dbdma_setup(AU1550_DDMA_INT, au1550_dbdev_tab); case ALCHEMY_CPU_AU1200: return dbdma_setup(AU1200_DDMA_INT, au1200_dbdev_tab); + case ALCHEMY_CPU_AU1300: + return dbdma_setup(AU1300_DDMA_INT, au1300_dbdev_tab); } return 0; } diff --git a/arch/mips/alchemy/common/gpiolib.c b/arch/mips/alchemy/common/gpiolib.c index 91fb4d9e30f..f1b50f0c01d 100644 --- a/arch/mips/alchemy/common/gpiolib.c +++ b/arch/mips/alchemy/common/gpiolib.c @@ -27,6 +27,7 @@ * CONFIG_ALCHEMY_GPIO_INDIRECT=n, otherwise compilation will fail! * au1000 SoC have only one GPIO block : GPIO1 * Au1100, Au15x0, Au12x0 have a second one : GPIO2 + * Au1300 is totally different: 1 block with up to 128 GPIOs */ #include <linux/init.h> @@ -35,6 +36,7 @@ #include <linux/types.h> #include <linux/gpio.h> #include <asm/mach-au1x00/gpio-au1000.h> +#include <asm/mach-au1x00/gpio-au1300.h> static int gpio2_get(struct gpio_chip *chip, unsigned offset) { @@ -115,6 +117,43 @@ struct gpio_chip alchemy_gpio_chip[] = { }, }; +static int alchemy_gpic_get(struct gpio_chip *chip, unsigned int off) +{ + return au1300_gpio_get_value(off + AU1300_GPIO_BASE); +} + +static void alchemy_gpic_set(struct gpio_chip *chip, unsigned int off, int v) +{ + au1300_gpio_set_value(off + AU1300_GPIO_BASE, v); +} + +static int alchemy_gpic_dir_input(struct gpio_chip *chip, unsigned int off) +{ + return au1300_gpio_direction_input(off + AU1300_GPIO_BASE); +} + +static int alchemy_gpic_dir_output(struct gpio_chip *chip, unsigned int off, + int v) +{ + return au1300_gpio_direction_output(off + AU1300_GPIO_BASE, v); +} + +static int alchemy_gpic_gpio_to_irq(struct gpio_chip *chip, unsigned int off) +{ + return au1300_gpio_to_irq(off + AU1300_GPIO_BASE); +} + +static struct gpio_chip au1300_gpiochip = { + .label = "alchemy-gpic", + .direction_input = alchemy_gpic_dir_input, + .direction_output = alchemy_gpic_dir_output, + .get = alchemy_gpic_get, + .set = alchemy_gpic_set, + .to_irq = alchemy_gpic_gpio_to_irq, + .base = AU1300_GPIO_BASE, + .ngpio = AU1300_GPIO_NUM, +}; + static int __init alchemy_gpiochip_init(void) { int ret = 0; @@ -127,6 +166,9 @@ static int __init alchemy_gpiochip_init(void) ret = gpiochip_add(&alchemy_gpio_chip[0]); ret |= gpiochip_add(&alchemy_gpio_chip[1]); break; + case ALCHEMY_CPU_AU1300: + ret = gpiochip_add(&au1300_gpiochip); + break; } return ret; } diff --git a/arch/mips/alchemy/common/irq.c b/arch/mips/alchemy/common/irq.c index 8b60ba0675e..94fbcd19eb9 100644 --- a/arch/mips/alchemy/common/irq.c +++ b/arch/mips/alchemy/common/irq.c @@ -25,19 +25,15 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <linux/bitops.h> +#include <linux/export.h> #include <linux/init.h> #include <linux/interrupt.h> -#include <linux/irq.h> #include <linux/slab.h> #include <linux/syscore_ops.h> #include <asm/irq_cpu.h> -#include <asm/mipsregs.h> #include <asm/mach-au1x00/au1000.h> -#ifdef CONFIG_MIPS_PB1000 -#include <asm/mach-pb1x00/pb1000.h> -#endif +#include <asm/mach-au1x00/gpio-au1300.h> /* Interrupt Controller register offsets */ #define IC_CFG0RD 0x40 @@ -69,7 +65,17 @@ #define IC_FALLINGCLR 0x7C #define IC_TESTBIT 0x80 -static int au1x_ic_settype(struct irq_data *d, unsigned int flow_type); +/* per-processor fixed function irqs */ +struct alchemy_irqmap { + int irq; /* linux IRQ number */ + int type; /* IRQ_TYPE_ */ + int prio; /* irq priority, 0 highest, 3 lowest */ + int internal; /* GPIC: internal source (no ext. pin)? */ +}; + +static int au1x_ic_settype(struct irq_data *d, unsigned int type); +static int au1300_gpic_settype(struct irq_data *d, unsigned int type); + /* NOTE on interrupt priorities: The original writers of this code said: * @@ -77,176 +83,207 @@ static int au1x_ic_settype(struct irq_data *d, unsigned int flow_type); * the USB devices-side packet complete interrupt (USB_DEV_REQ_INT) * needs the highest priority. */ - -/* per-processor fixed function irqs */ -struct au1xxx_irqmap { - int im_irq; - int im_type; - int im_request; /* set 1 to get higher priority */ +struct alchemy_irqmap au1000_irqmap[] __initdata = { + { AU1000_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_UART2_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_SSI0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_SSI1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0, 0 }, + { AU1000_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0, 0 }, + { AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1000_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1000_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1000_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1000_AC97C_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { -1, }, }; -struct au1xxx_irqmap au1000_irqmap[] __initdata = { - { AU1000_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_UART2_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_SSI0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_SSI1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 }, - { AU1000_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 1 }, - { AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 }, - { AU1000_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 }, +struct alchemy_irqmap au1500_irqmap[] __initdata = { + { AU1500_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1500_PCI_INTA, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1500_PCI_INTB, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1500_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1500_PCI_INTC, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1500_PCI_INTD, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1500_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1500_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1500_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1500_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1500_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1500_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1500_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1500_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1500_TOY_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1500_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1500_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1500_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1500_RTC_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1500_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1500_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1500_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0, 0 }, + { AU1500_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0, 0 }, + { AU1500_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1500_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1500_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1500_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1500_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1500_AC97C_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { -1, }, }; -struct au1xxx_irqmap au1500_irqmap[] __initdata = { - { AU1500_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1500_PCI_INTA, IRQ_TYPE_LEVEL_LOW, 0 }, - { AU1500_PCI_INTB, IRQ_TYPE_LEVEL_LOW, 0 }, - { AU1500_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1500_PCI_INTC, IRQ_TYPE_LEVEL_LOW, 0 }, - { AU1500_PCI_INTD, IRQ_TYPE_LEVEL_LOW, 0 }, - { AU1500_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1500_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1500_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1500_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1500_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1500_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1500_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1500_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1500_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1500_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1500_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1500_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1500_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1500_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1500_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1500_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 }, - { AU1500_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 1 }, - { AU1500_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1500_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 }, - { AU1500_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1500_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1500_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1500_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 }, +struct alchemy_irqmap au1100_irqmap[] __initdata = { + { AU1100_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_SD_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_SSI0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_SSI1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_TOY_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1100_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1100_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1100_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1100_RTC_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1100_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1100_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1100_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0, 0 }, + { AU1100_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0, 0 }, + { AU1100_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1100_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1100_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1100_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1100_AC97C_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { -1, }, }; -struct au1xxx_irqmap au1100_irqmap[] __initdata = { - { AU1100_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1100_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1100_SD_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1100_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1100_SSI0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1100_SSI1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1100_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1100_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1100_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1100_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1100_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1100_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1100_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1100_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1100_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1100_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1100_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1100_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1100_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1100_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1100_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1100_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 }, - { AU1100_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1100_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1100_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 1 }, - { AU1100_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1100_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 }, - { AU1100_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1100_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1100_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1100_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 }, +struct alchemy_irqmap au1550_irqmap[] __initdata = { + { AU1550_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1550_PCI_INTA, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1550_PCI_INTB, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1550_DDMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1550_CRYPTO_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1550_PCI_INTC, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1550_PCI_INTD, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1550_PCI_RST_INT, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1550_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1550_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1550_PSC0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1550_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1550_PSC2_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1550_PSC3_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1550_TOY_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1550_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1550_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1550_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1550_RTC_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1550_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1550_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1550_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0, 0 }, + { AU1550_NAND_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1550_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0, 0 }, + { AU1550_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1550_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 1, 0 }, + { AU1550_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1550_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { -1, }, }; -struct au1xxx_irqmap au1550_irqmap[] __initdata = { - { AU1550_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1550_PCI_INTA, IRQ_TYPE_LEVEL_LOW, 0 }, - { AU1550_PCI_INTB, IRQ_TYPE_LEVEL_LOW, 0 }, - { AU1550_DDMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1550_CRYPTO_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1550_PCI_INTC, IRQ_TYPE_LEVEL_LOW, 0 }, - { AU1550_PCI_INTD, IRQ_TYPE_LEVEL_LOW, 0 }, - { AU1550_PCI_RST_INT, IRQ_TYPE_LEVEL_LOW, 0 }, - { AU1550_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1550_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1550_PSC0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1550_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1550_PSC2_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1550_PSC3_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1550_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1550_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1550_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1550_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1550_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1550_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1550_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1550_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 }, - { AU1550_NAND_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1550_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 1 }, - { AU1550_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1550_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 }, - { AU1550_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1550_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, +struct alchemy_irqmap au1200_irqmap[] __initdata = { + { AU1200_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1200_SWT_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1200_SD_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1200_DDMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1200_MAE_BE_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1200_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1200_MAE_FE_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1200_PSC0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1200_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1200_AES_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1200_CAMERA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1200_TOY_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1200_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1200_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1200_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1200_RTC_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1200_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1200_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1200_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0, 0 }, + { AU1200_NAND_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, + { AU1200_USB_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1200_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, + { AU1200_MAE_BOTH_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { -1, }, }; -struct au1xxx_irqmap au1200_irqmap[] __initdata = { - { AU1200_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1200_SWT_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1200_SD_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1200_DDMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1200_MAE_BE_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1200_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1200_MAE_FE_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1200_PSC0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1200_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1200_AES_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1200_CAMERA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1200_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1200_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1200_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1200_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1200_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1200_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1200_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1200_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 }, - { AU1200_NAND_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1200_USB_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1200_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1200_MAE_BOTH_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { -1, }, +static struct alchemy_irqmap au1300_irqmap[] __initdata = { + /* multifunction: gpio pin or device */ + { AU1300_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, }, + { AU1300_UART2_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, }, + { AU1300_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, }, + { AU1300_SD1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, }, + { AU1300_SD2_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, }, + { AU1300_PSC0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, }, + { AU1300_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, }, + { AU1300_PSC2_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, }, + { AU1300_PSC3_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, }, + { AU1300_NAND_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, }, + /* au1300 internal */ + { AU1300_DDMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, + { AU1300_MMU_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, + { AU1300_MPU_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, + { AU1300_GPU_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, + { AU1300_UDMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, + { AU1300_TOY_INT, IRQ_TYPE_EDGE_RISING, 1, 1, }, + { AU1300_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 1, }, + { AU1300_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 1, }, + { AU1300_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1, 1, }, + { AU1300_RTC_INT, IRQ_TYPE_EDGE_RISING, 1, 1, }, + { AU1300_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 1, }, + { AU1300_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 1, }, + { AU1300_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0, 1, }, + { AU1300_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, + { AU1300_SD0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, + { AU1300_USB_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, + { AU1300_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, + { AU1300_BSA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, + { AU1300_MPE_INT, IRQ_TYPE_EDGE_RISING, 1, 1, }, + { AU1300_ITE_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, + { AU1300_AES_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, + { AU1300_CIM_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, + { -1, }, /* terminator */ }; +/******************************************************************************/ static void au1x_ic0_unmask(struct irq_data *d) { @@ -265,14 +302,6 @@ static void au1x_ic1_unmask(struct irq_data *d) __raw_writel(1 << bit, base + IC_MASKSET); __raw_writel(1 << bit, base + IC_WAKESET); - -/* very hacky. does the pb1000 cpld auto-disable this int? - * nowhere in the current kernel sources is it disabled. --mlau - */ -#if defined(CONFIG_MIPS_PB1000) - if (d->irq == AU1000_GPIO15_INT) - __raw_writel(0x4000, (void __iomem *)PB1000_MDR); /* enable int */ -#endif wmb(); } @@ -470,40 +499,219 @@ static int au1x_ic_settype(struct irq_data *d, unsigned int flow_type) return ret; } -asmlinkage void plat_irq_dispatch(void) +/******************************************************************************/ + +/* + * au1300_gpic_chgcfg - change PIN configuration. + * @gpio: pin to change (0-based GPIO number from datasheet). + * @clr: clear all bits set in 'clr'. + * @set: set these bits. + * + * modifies a pins' configuration register, bits set in @clr will + * be cleared in the register, bits in @set will be set. + */ +static inline void au1300_gpic_chgcfg(unsigned int gpio, + unsigned long clr, + unsigned long set) +{ + void __iomem *r = AU1300_GPIC_ADDR; + unsigned long l; + + r += gpio * 4; /* offset into pin config array */ + l = __raw_readl(r + AU1300_GPIC_PINCFG); + l &= ~clr; + l |= set; + __raw_writel(l, r + AU1300_GPIC_PINCFG); + wmb(); +} + +/* + * au1300_pinfunc_to_gpio - assign a pin as GPIO input (GPIO ctrl). + * @pin: pin (0-based GPIO number from datasheet). + * + * Assigns a GPIO pin to the GPIO controller, so its level can either + * be read or set through the generic GPIO functions. + * If you need a GPOUT, use au1300_gpio_set_value(pin, 0/1). + * REVISIT: is this function really necessary? + */ +void au1300_pinfunc_to_gpio(enum au1300_multifunc_pins gpio) +{ + au1300_gpio_direction_input(gpio + AU1300_GPIO_BASE); +} +EXPORT_SYMBOL_GPL(au1300_pinfunc_to_gpio); + +/* + * au1300_pinfunc_to_dev - assign a pin to the device function. + * @pin: pin (0-based GPIO number from datasheet). + * + * Assigns a GPIO pin to its associated device function; the pin will be + * driven by the device and not through GPIO functions. + */ +void au1300_pinfunc_to_dev(enum au1300_multifunc_pins gpio) +{ + void __iomem *r = AU1300_GPIC_ADDR; + unsigned long bit; + + r += GPIC_GPIO_BANKOFF(gpio); + bit = GPIC_GPIO_TO_BIT(gpio); + __raw_writel(bit, r + AU1300_GPIC_DEVSEL); + wmb(); +} +EXPORT_SYMBOL_GPL(au1300_pinfunc_to_dev); + +/* + * au1300_set_irq_priority - set internal priority of IRQ. + * @irq: irq to set priority (linux irq number). + * @p: priority (0 = highest, 3 = lowest). + */ +void au1300_set_irq_priority(unsigned int irq, int p) { - unsigned int pending = read_c0_status() & read_c0_cause(); - unsigned long s, off; - - if (pending & CAUSEF_IP7) { - off = MIPS_CPU_IRQ_BASE + 7; - goto handle; - } else if (pending & CAUSEF_IP2) { - s = KSEG1ADDR(AU1000_IC0_PHYS_ADDR) + IC_REQ0INT; - off = AU1000_INTC0_INT_BASE; - } else if (pending & CAUSEF_IP3) { - s = KSEG1ADDR(AU1000_IC0_PHYS_ADDR) + IC_REQ1INT; - off = AU1000_INTC0_INT_BASE; - } else if (pending & CAUSEF_IP4) { - s = KSEG1ADDR(AU1000_IC1_PHYS_ADDR) + IC_REQ0INT; - off = AU1000_INTC1_INT_BASE; - } else if (pending & CAUSEF_IP5) { - s = KSEG1ADDR(AU1000_IC1_PHYS_ADDR) + IC_REQ1INT; - off = AU1000_INTC1_INT_BASE; - } else - goto spurious; - - s = __raw_readl((void __iomem *)s); - if (unlikely(!s)) { -spurious: - spurious_interrupt(); - return; + irq -= ALCHEMY_GPIC_INT_BASE; + au1300_gpic_chgcfg(irq, GPIC_CFG_IL_MASK, GPIC_CFG_IL_SET(p)); +} +EXPORT_SYMBOL_GPL(au1300_set_irq_priority); + +/* + * au1300_set_dbdma_gpio - assign a gpio to one of the DBDMA triggers. + * @dchan: dbdma trigger select (0, 1). + * @gpio: pin to assign as trigger. + * + * DBDMA controller has 2 external trigger sources; this function + * assigns a GPIO to the selected trigger. + */ +void au1300_set_dbdma_gpio(int dchan, unsigned int gpio) +{ + unsigned long r; + + if ((dchan >= 0) && (dchan <= 1)) { + r = __raw_readl(AU1300_GPIC_ADDR + AU1300_GPIC_DMASEL); + r &= ~(0xff << (8 * dchan)); + r |= (gpio & 0x7f) << (8 * dchan); + __raw_writel(r, AU1300_GPIC_ADDR + AU1300_GPIC_DMASEL); + wmb(); } - off += __ffs(s); -handle: - do_IRQ(off); } +static inline void gpic_pin_set_idlewake(unsigned int gpio, int allow) +{ + au1300_gpic_chgcfg(gpio, GPIC_CFG_IDLEWAKE, + allow ? GPIC_CFG_IDLEWAKE : 0); +} + +static void au1300_gpic_mask(struct irq_data *d) +{ + void __iomem *r = AU1300_GPIC_ADDR; + unsigned long bit, irq = d->irq; + + irq -= ALCHEMY_GPIC_INT_BASE; + r += GPIC_GPIO_BANKOFF(irq); + bit = GPIC_GPIO_TO_BIT(irq); + __raw_writel(bit, r + AU1300_GPIC_IDIS); + wmb(); + + gpic_pin_set_idlewake(irq, 0); +} + +static void au1300_gpic_unmask(struct irq_data *d) +{ + void __iomem *r = AU1300_GPIC_ADDR; + unsigned long bit, irq = d->irq; + + irq -= ALCHEMY_GPIC_INT_BASE; + + gpic_pin_set_idlewake(irq, 1); + + r += GPIC_GPIO_BANKOFF(irq); + bit = GPIC_GPIO_TO_BIT(irq); + __raw_writel(bit, r + AU1300_GPIC_IEN); + wmb(); +} + +static void au1300_gpic_maskack(struct irq_data *d) +{ + void __iomem *r = AU1300_GPIC_ADDR; + unsigned long bit, irq = d->irq; + + irq -= ALCHEMY_GPIC_INT_BASE; + r += GPIC_GPIO_BANKOFF(irq); + bit = GPIC_GPIO_TO_BIT(irq); + __raw_writel(bit, r + AU1300_GPIC_IPEND); /* ack */ + __raw_writel(bit, r + AU1300_GPIC_IDIS); /* mask */ + wmb(); + + gpic_pin_set_idlewake(irq, 0); +} + +static void au1300_gpic_ack(struct irq_data *d) +{ + void __iomem *r = AU1300_GPIC_ADDR; + unsigned long bit, irq = d->irq; + + irq -= ALCHEMY_GPIC_INT_BASE; + r += GPIC_GPIO_BANKOFF(irq); + bit = GPIC_GPIO_TO_BIT(irq); + __raw_writel(bit, r + AU1300_GPIC_IPEND); /* ack */ + wmb(); +} + +static struct irq_chip au1300_gpic = { + .name = "GPIOINT", + .irq_ack = au1300_gpic_ack, + .irq_mask = au1300_gpic_mask, + .irq_mask_ack = au1300_gpic_maskack, + .irq_unmask = au1300_gpic_unmask, + .irq_set_type = au1300_gpic_settype, +}; + +static int au1300_gpic_settype(struct irq_data *d, unsigned int type) +{ + unsigned long s; + unsigned char *name = NULL; + irq_flow_handler_t hdl = NULL; + + switch (type) { + case IRQ_TYPE_LEVEL_HIGH: + s = GPIC_CFG_IC_LEVEL_HIGH; + name = "high"; + hdl = handle_level_irq; + break; + case IRQ_TYPE_LEVEL_LOW: + s = GPIC_CFG_IC_LEVEL_LOW; + name = "low"; + hdl = handle_level_irq; + break; + case IRQ_TYPE_EDGE_RISING: + s = GPIC_CFG_IC_EDGE_RISE; + name = "posedge"; + hdl = handle_edge_irq; + break; + case IRQ_TYPE_EDGE_FALLING: + s = GPIC_CFG_IC_EDGE_FALL; + name = "negedge"; + hdl = handle_edge_irq; + break; + case IRQ_TYPE_EDGE_BOTH: + s = GPIC_CFG_IC_EDGE_BOTH; + name = "bothedge"; + hdl = handle_edge_irq; + break; + case IRQ_TYPE_NONE: + s = GPIC_CFG_IC_OFF; + name = "disabled"; + hdl = handle_level_irq; + break; + default: + return -EINVAL; + } + + __irq_set_chip_handler_name_locked(d->irq, &au1300_gpic, hdl, name); + + au1300_gpic_chgcfg(d->irq - ALCHEMY_GPIC_INT_BASE, GPIC_CFG_IC_MASK, s); + + return 0; +} + +/******************************************************************************/ static inline void ic_init(void __iomem *base) { @@ -521,13 +729,159 @@ static inline void ic_init(void __iomem *base) wmb(); } -static void __init au1000_init_irq(struct au1xxx_irqmap *map) +static unsigned long alchemy_gpic_pmdata[ALCHEMY_GPIC_INT_NUM + 6]; + +static inline void alchemy_ic_suspend_one(void __iomem *base, unsigned long *d) +{ + d[0] = __raw_readl(base + IC_CFG0RD); + d[1] = __raw_readl(base + IC_CFG1RD); + d[2] = __raw_readl(base + IC_CFG2RD); + d[3] = __raw_readl(base + IC_SRCRD); + d[4] = __raw_readl(base + IC_ASSIGNRD); + d[5] = __raw_readl(base + IC_WAKERD); + d[6] = __raw_readl(base + IC_MASKRD); + ic_init(base); /* shut it up too while at it */ +} + +static inline void alchemy_ic_resume_one(void __iomem *base, unsigned long *d) +{ + ic_init(base); + + __raw_writel(d[0], base + IC_CFG0SET); + __raw_writel(d[1], base + IC_CFG1SET); + __raw_writel(d[2], base + IC_CFG2SET); + __raw_writel(d[3], base + IC_SRCSET); + __raw_writel(d[4], base + IC_ASSIGNSET); + __raw_writel(d[5], base + IC_WAKESET); + wmb(); + + __raw_writel(d[6], base + IC_MASKSET); + wmb(); +} + +static int alchemy_ic_suspend(void) +{ + alchemy_ic_suspend_one((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR), + alchemy_gpic_pmdata); + alchemy_ic_suspend_one((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR), + &alchemy_gpic_pmdata[7]); + return 0; +} + +static void alchemy_ic_resume(void) +{ + alchemy_ic_resume_one((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR), + &alchemy_gpic_pmdata[7]); + alchemy_ic_resume_one((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR), + alchemy_gpic_pmdata); +} + +static int alchemy_gpic_suspend(void) +{ + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1300_GPIC_PHYS_ADDR); + int i; + + /* save 4 interrupt mask status registers */ + alchemy_gpic_pmdata[0] = __raw_readl(base + AU1300_GPIC_IEN + 0x0); + alchemy_gpic_pmdata[1] = __raw_readl(base + AU1300_GPIC_IEN + 0x4); + alchemy_gpic_pmdata[2] = __raw_readl(base + AU1300_GPIC_IEN + 0x8); + alchemy_gpic_pmdata[3] = __raw_readl(base + AU1300_GPIC_IEN + 0xc); + + /* save misc register(s) */ + alchemy_gpic_pmdata[4] = __raw_readl(base + AU1300_GPIC_DMASEL); + + /* molto silenzioso */ + __raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x0); + __raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x4); + __raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x8); + __raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0xc); + wmb(); + + /* save pin/int-type configuration */ + base += AU1300_GPIC_PINCFG; + for (i = 0; i < ALCHEMY_GPIC_INT_NUM; i++) + alchemy_gpic_pmdata[i + 5] = __raw_readl(base + (i << 2)); + + wmb(); + + return 0; +} + +static void alchemy_gpic_resume(void) +{ + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1300_GPIC_PHYS_ADDR); + int i; + + /* disable all first */ + __raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x0); + __raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x4); + __raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x8); + __raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0xc); + wmb(); + + /* restore pin/int-type configurations */ + base += AU1300_GPIC_PINCFG; + for (i = 0; i < ALCHEMY_GPIC_INT_NUM; i++) + __raw_writel(alchemy_gpic_pmdata[i + 5], base + (i << 2)); + wmb(); + + /* restore misc register(s) */ + base = (void __iomem *)KSEG1ADDR(AU1300_GPIC_PHYS_ADDR); + __raw_writel(alchemy_gpic_pmdata[4], base + AU1300_GPIC_DMASEL); + wmb(); + + /* finally restore masks */ + __raw_writel(alchemy_gpic_pmdata[0], base + AU1300_GPIC_IEN + 0x0); + __raw_writel(alchemy_gpic_pmdata[1], base + AU1300_GPIC_IEN + 0x4); + __raw_writel(alchemy_gpic_pmdata[2], base + AU1300_GPIC_IEN + 0x8); + __raw_writel(alchemy_gpic_pmdata[3], base + AU1300_GPIC_IEN + 0xc); + wmb(); +} + +static struct syscore_ops alchemy_ic_pmops = { + .suspend = alchemy_ic_suspend, + .resume = alchemy_ic_resume, +}; + +static struct syscore_ops alchemy_gpic_pmops = { + .suspend = alchemy_gpic_suspend, + .resume = alchemy_gpic_resume, +}; + +/******************************************************************************/ + +/* create chained handlers for the 4 IC requests to the MIPS IRQ ctrl */ +#define DISP(name, base, addr) \ +static void au1000_##name##_dispatch(unsigned int irq, struct irq_desc *d) \ +{ \ + unsigned long r = __raw_readl((void __iomem *)KSEG1ADDR(addr)); \ + if (likely(r)) \ + generic_handle_irq(base + __ffs(r)); \ + else \ + spurious_interrupt(); \ +} + +DISP(ic0r0, AU1000_INTC0_INT_BASE, AU1000_IC0_PHYS_ADDR + IC_REQ0INT) +DISP(ic0r1, AU1000_INTC0_INT_BASE, AU1000_IC0_PHYS_ADDR + IC_REQ1INT) +DISP(ic1r0, AU1000_INTC1_INT_BASE, AU1000_IC1_PHYS_ADDR + IC_REQ0INT) +DISP(ic1r1, AU1000_INTC1_INT_BASE, AU1000_IC1_PHYS_ADDR + IC_REQ1INT) + +static void alchemy_gpic_dispatch(unsigned int irq, struct irq_desc *d) +{ + int i = __raw_readl(AU1300_GPIC_ADDR + AU1300_GPIC_PRIENC); + generic_handle_irq(ALCHEMY_GPIC_INT_BASE + i); +} + +/******************************************************************************/ + +static void __init au1000_init_irq(struct alchemy_irqmap *map) { unsigned int bit, irq_nr; void __iomem *base; ic_init((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR)); ic_init((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR)); + register_syscore_ops(&alchemy_ic_pmops); mips_cpu_irq_init(); /* register all 64 possible IC0+IC1 irq sources as type "none". @@ -544,8 +898,8 @@ static void __init au1000_init_irq(struct au1xxx_irqmap *map) /* * Initialize IC0, which is fixed per processor. */ - while (map->im_irq != -1) { - irq_nr = map->im_irq; + while (map->irq != -1) { + irq_nr = map->irq; if (irq_nr >= AU1000_INTC1_INT_BASE) { bit = irq_nr - AU1000_INTC1_INT_BASE; @@ -554,16 +908,61 @@ static void __init au1000_init_irq(struct au1xxx_irqmap *map) bit = irq_nr - AU1000_INTC0_INT_BASE; base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR); } - if (map->im_request) + if (map->prio == 0) __raw_writel(1 << bit, base + IC_ASSIGNSET); - au1x_ic_settype(irq_get_irq_data(irq_nr), map->im_type); + au1x_ic_settype(irq_get_irq_data(irq_nr), map->type); ++map; } - set_c0_status(IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3); + irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 2, au1000_ic0r0_dispatch); + irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 3, au1000_ic0r1_dispatch); + irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 4, au1000_ic1r0_dispatch); + irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 5, au1000_ic1r1_dispatch); +} + +static void __init alchemy_gpic_init_irq(const struct alchemy_irqmap *dints) +{ + int i; + void __iomem *bank_base; + + register_syscore_ops(&alchemy_gpic_pmops); + mips_cpu_irq_init(); + + /* disable & ack all possible interrupt sources */ + for (i = 0; i < 4; i++) { + bank_base = AU1300_GPIC_ADDR + (i * 4); + __raw_writel(~0UL, bank_base + AU1300_GPIC_IDIS); + wmb(); + __raw_writel(~0UL, bank_base + AU1300_GPIC_IPEND); + wmb(); + } + + /* register an irq_chip for them, with 2nd highest priority */ + for (i = ALCHEMY_GPIC_INT_BASE; i <= ALCHEMY_GPIC_INT_LAST; i++) { + au1300_set_irq_priority(i, 1); + au1300_gpic_settype(irq_get_irq_data(i), IRQ_TYPE_NONE); + } + + /* setup known on-chip sources */ + while ((i = dints->irq) != -1) { + au1300_gpic_settype(irq_get_irq_data(i), dints->type); + au1300_set_irq_priority(i, dints->prio); + + if (dints->internal) + au1300_pinfunc_to_dev(i - ALCHEMY_GPIC_INT_BASE); + + dints++; + } + + irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 2, alchemy_gpic_dispatch); + irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 3, alchemy_gpic_dispatch); + irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 4, alchemy_gpic_dispatch); + irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 5, alchemy_gpic_dispatch); } +/******************************************************************************/ + void __init arch_init_irq(void) { switch (alchemy_get_cputype()) { @@ -582,65 +981,17 @@ void __init arch_init_irq(void) case ALCHEMY_CPU_AU1200: au1000_init_irq(au1200_irqmap); break; + case ALCHEMY_CPU_AU1300: + alchemy_gpic_init_irq(au1300_irqmap); + break; + default: + pr_err("unknown Alchemy IRQ core\n"); + break; } } - -static unsigned long alchemy_ic_pmdata[7 * 2]; - -static inline void alchemy_ic_suspend_one(void __iomem *base, unsigned long *d) -{ - d[0] = __raw_readl(base + IC_CFG0RD); - d[1] = __raw_readl(base + IC_CFG1RD); - d[2] = __raw_readl(base + IC_CFG2RD); - d[3] = __raw_readl(base + IC_SRCRD); - d[4] = __raw_readl(base + IC_ASSIGNRD); - d[5] = __raw_readl(base + IC_WAKERD); - d[6] = __raw_readl(base + IC_MASKRD); - ic_init(base); /* shut it up too while at it */ -} - -static inline void alchemy_ic_resume_one(void __iomem *base, unsigned long *d) -{ - ic_init(base); - - __raw_writel(d[0], base + IC_CFG0SET); - __raw_writel(d[1], base + IC_CFG1SET); - __raw_writel(d[2], base + IC_CFG2SET); - __raw_writel(d[3], base + IC_SRCSET); - __raw_writel(d[4], base + IC_ASSIGNSET); - __raw_writel(d[5], base + IC_WAKESET); - wmb(); - - __raw_writel(d[6], base + IC_MASKSET); - wmb(); -} - -static int alchemy_ic_suspend(void) -{ - alchemy_ic_suspend_one((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR), - alchemy_ic_pmdata); - alchemy_ic_suspend_one((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR), - &alchemy_ic_pmdata[7]); - return 0; -} - -static void alchemy_ic_resume(void) -{ - alchemy_ic_resume_one((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR), - &alchemy_ic_pmdata[7]); - alchemy_ic_resume_one((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR), - alchemy_ic_pmdata); -} - -static struct syscore_ops alchemy_ic_syscore_ops = { - .suspend = alchemy_ic_suspend, - .resume = alchemy_ic_resume, -}; - -static int __init alchemy_ic_pm_init(void) +asmlinkage void plat_irq_dispatch(void) { - register_syscore_ops(&alchemy_ic_syscore_ops); - return 0; + unsigned long r = (read_c0_status() & read_c0_cause()) >> 8; + do_IRQ(MIPS_CPU_IRQ_BASE + __ffs(r & 0xff)); } -device_initcall(alchemy_ic_pm_init); diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c index c8e5d72a582..95cb9113b12 100644 --- a/arch/mips/alchemy/common/platform.c +++ b/arch/mips/alchemy/common/platform.c @@ -82,6 +82,12 @@ static struct plat_serial8250_port au1x00_uart_data[][4] __initdata = { PORT(AU1000_UART0_PHYS_ADDR, AU1200_UART0_INT), PORT(AU1000_UART1_PHYS_ADDR, AU1200_UART1_INT), }, + [ALCHEMY_CPU_AU1300] = { + PORT(AU1300_UART0_PHYS_ADDR, AU1300_UART0_INT), + PORT(AU1300_UART1_PHYS_ADDR, AU1300_UART1_INT), + PORT(AU1300_UART2_PHYS_ADDR, AU1300_UART2_INT), + PORT(AU1300_UART3_PHYS_ADDR, AU1300_UART3_INT), + }, }; static struct platform_device au1xx0_uart_device = { @@ -122,10 +128,12 @@ static unsigned long alchemy_ohci_data[][2] __initdata = { [ALCHEMY_CPU_AU1100] = { AU1000_USB_OHCI_PHYS_ADDR, AU1100_USB_HOST_INT }, [ALCHEMY_CPU_AU1550] = { AU1550_USB_OHCI_PHYS_ADDR, AU1550_USB_HOST_INT }, [ALCHEMY_CPU_AU1200] = { AU1200_USB_OHCI_PHYS_ADDR, AU1200_USB_INT }, + [ALCHEMY_CPU_AU1300] = { AU1300_USB_OHCI0_PHYS_ADDR, AU1300_USB_INT }, }; static unsigned long alchemy_ehci_data[][2] __initdata = { [ALCHEMY_CPU_AU1200] = { AU1200_USB_EHCI_PHYS_ADDR, AU1200_USB_INT }, + [ALCHEMY_CPU_AU1300] = { AU1300_USB_EHCI_PHYS_ADDR, AU1300_USB_INT }, }; static int __init _new_usbres(struct resource **r, struct platform_device **d) @@ -169,8 +177,8 @@ static void __init alchemy_setup_usb(int ctype) printk(KERN_INFO "Alchemy USB: cannot add OHCI0\n"); - /* setup EHCI0: Au1200 */ - if (ctype == ALCHEMY_CPU_AU1200) { + /* setup EHCI0: Au1200/Au1300 */ + if ((ctype == ALCHEMY_CPU_AU1200) || (ctype == ALCHEMY_CPU_AU1300)) { if (_new_usbres(&res, &pdev)) return; @@ -187,6 +195,25 @@ static void __init alchemy_setup_usb(int ctype) if (platform_device_register(pdev)) printk(KERN_INFO "Alchemy USB: cannot add EHCI0\n"); } + + /* Au1300: OHCI1 */ + if (ctype == ALCHEMY_CPU_AU1300) { + if (_new_usbres(&res, &pdev)) + return; + + res[0].start = AU1300_USB_OHCI1_PHYS_ADDR; + res[0].end = res[0].start + 0x100 - 1; + res[0].flags = IORESOURCE_MEM; + res[1].start = AU1300_USB_INT; + res[1].end = res[1].start; + res[1].flags = IORESOURCE_IRQ; + pdev->name = "au1xxx-ohci"; + pdev->id = 1; + pdev->dev.dma_mask = &alchemy_ohci_dmamask; + + if (platform_device_register(pdev)) + printk(KERN_INFO "Alchemy USB: cannot add OHCI1\n"); + } } /* Macro to help defining the Ethernet MAC resources */ diff --git a/arch/mips/alchemy/common/power.c b/arch/mips/alchemy/common/power.c index bdd6651e9a4..0c7fce2a3c1 100644 --- a/arch/mips/alchemy/common/power.c +++ b/arch/mips/alchemy/common/power.c @@ -126,6 +126,9 @@ void au_sleep(void) case ALCHEMY_CPU_AU1200: alchemy_sleep_au1550(); break; + case ALCHEMY_CPU_AU1300: + alchemy_sleep_au1300(); + break; } restore_core_regs(); diff --git a/arch/mips/alchemy/common/sleeper.S b/arch/mips/alchemy/common/sleeper.S index 77f3c743b71..c7bcc7e5c82 100644 --- a/arch/mips/alchemy/common/sleeper.S +++ b/arch/mips/alchemy/common/sleeper.S @@ -153,6 +153,79 @@ LEAF(alchemy_sleep_au1550) END(alchemy_sleep_au1550) +/* sleepcode for Au1300 memory controller type */ +LEAF(alchemy_sleep_au1300) + + SETUP_SLEEP + + /* cache following instructions, as memory gets put to sleep */ + la t0, 2f + la t1, 4f + subu t2, t1, t0 + + .set mips3 + +1: cache 0x14, 0(t0) + subu t2, t2, 32 + bgez t2, 1b + addu t0, t0, 32 + + .set mips0 + +2: lui a0, 0xb400 /* mem_xxx */ + + /* disable all ports in mem_sdportcfga */ + sw zero, 0x868(a0) /* mem_sdportcfga */ + sync + + /* disable ODT */ + li t0, 0x03010000 + sw t0, 0x08d8(a0) /* mem_sdcmd0 */ + sw t0, 0x08dc(a0) /* mem_sdcmd1 */ + sync + + /* precharge */ + li t0, 0x23000400 + sw t0, 0x08dc(a0) /* mem_sdcmd1 */ + sw t0, 0x08d8(a0) /* mem_sdcmd0 */ + sync + + /* auto refresh */ + sw zero, 0x08c8(a0) /* mem_sdautoref */ + sync + + /* block access to the DDR */ + lw t0, 0x0848(a0) /* mem_sdconfigb */ + li t1, (1 << 7 | 0x3F) + or t0, t0, t1 + sw t0, 0x0848(a0) /* mem_sdconfigb */ + sync + + /* issue the Self Refresh command */ + li t0, 0x10000000 + sw t0, 0x08dc(a0) /* mem_sdcmd1 */ + sw t0, 0x08d8(a0) /* mem_sdcmd0 */ + sync + + /* wait for sdram to enter self-refresh mode */ + lui t0, 0x0300 +3: lw t1, 0x0850(a0) /* mem_sdstat */ + and t2, t1, t0 + bne t2, t0, 3b + nop + + /* disable SDRAM clocks */ + li t0, ~(3<<28) + lw t1, 0x0840(a0) /* mem_sdconfiga */ + and t1, t1, t0 /* clear CE[1:0] */ + sw t1, 0x0840(a0) /* mem_sdconfiga */ + sync + + DO_SLEEP +4: + +END(alchemy_sleep_au1300) + /* This is where we return upon wakeup. * Reload all of the registers and return. diff --git a/arch/mips/alchemy/common/time.c b/arch/mips/alchemy/common/time.c index d5da6adbf63..7da4d008148 100644 --- a/arch/mips/alchemy/common/time.c +++ b/arch/mips/alchemy/common/time.c @@ -92,7 +92,7 @@ static struct clock_event_device au1x_rtcmatch2_clockdev = { static struct irqaction au1x_rtcmatch2_irqaction = { .handler = au1x_rtcmatch2_irq, - .flags = IRQF_DISABLED | IRQF_TIMER, + .flags = IRQF_TIMER, .name = "timer", .dev_id = &au1x_rtcmatch2_clockdev, }; @@ -178,6 +178,7 @@ static int alchemy_m2inttab[] __initdata = { AU1100_RTC_MATCH2_INT, AU1550_RTC_MATCH2_INT, AU1200_RTC_MATCH2_INT, + AU1300_RTC_MATCH2_INT, }; void __init plat_time_init(void) diff --git a/arch/mips/alchemy/common/vss.c b/arch/mips/alchemy/common/vss.c new file mode 100644 index 00000000000..d23b1444d36 --- /dev/null +++ b/arch/mips/alchemy/common/vss.c @@ -0,0 +1,84 @@ +/* + * Au1300 media block power gating (VSS) + * + * This is a stop-gap solution until I have the clock framework integration + * ready. This stuff here really must be handled transparently when clocks + * for various media blocks are enabled/disabled. + */ + +#include <linux/module.h> +#include <linux/spinlock.h> +#include <asm/mach-au1x00/au1000.h> + +#define VSS_GATE 0x00 /* gate wait timers */ +#define VSS_CLKRST 0x04 /* clock/block control */ +#define VSS_FTR 0x08 /* footers */ + +#define VSS_ADDR(blk) (KSEG1ADDR(AU1300_VSS_PHYS_ADDR) + (blk * 0x0c)) + +static DEFINE_SPINLOCK(au1300_vss_lock); + +/* enable a block as outlined in the databook */ +static inline void __enable_block(int block) +{ + void __iomem *base = (void __iomem *)VSS_ADDR(block); + + __raw_writel(3, base + VSS_CLKRST); /* enable clock, assert reset */ + wmb(); + + __raw_writel(0x01fffffe, base + VSS_GATE); /* maximum setup time */ + wmb(); + + /* enable footers in sequence */ + __raw_writel(0x01, base + VSS_FTR); + wmb(); + __raw_writel(0x03, base + VSS_FTR); + wmb(); + __raw_writel(0x07, base + VSS_FTR); + wmb(); + __raw_writel(0x0f, base + VSS_FTR); + wmb(); + + __raw_writel(0x01ffffff, base + VSS_GATE); /* start FSM too */ + wmb(); + + __raw_writel(2, base + VSS_CLKRST); /* deassert reset */ + wmb(); + + __raw_writel(0x1f, base + VSS_FTR); /* enable isolation cells */ + wmb(); +} + +/* disable a block as outlined in the databook */ +static inline void __disable_block(int block) +{ + void __iomem *base = (void __iomem *)VSS_ADDR(block); + + __raw_writel(0x0f, base + VSS_FTR); /* disable isolation cells */ + wmb(); + __raw_writel(0, base + VSS_GATE); /* disable FSM */ + wmb(); + __raw_writel(3, base + VSS_CLKRST); /* assert reset */ + wmb(); + __raw_writel(1, base + VSS_CLKRST); /* disable clock */ + wmb(); + __raw_writel(0, base + VSS_FTR); /* disable all footers */ + wmb(); +} + +void au1300_vss_block_control(int block, int enable) +{ + unsigned long flags; + + if (alchemy_get_cputype() != ALCHEMY_CPU_AU1300) + return; + + /* only one block at a time */ + spin_lock_irqsave(&au1300_vss_lock, flags); + if (enable) + __enable_block(block); + else + __disable_block(block); + spin_unlock_irqrestore(&au1300_vss_lock, flags); +} +EXPORT_SYMBOL_GPL(au1300_vss_block_control); diff --git a/arch/mips/alchemy/devboards/Makefile b/arch/mips/alchemy/devboards/Makefile index 826449c817c..3c37fb30336 100644 --- a/arch/mips/alchemy/devboards/Makefile +++ b/arch/mips/alchemy/devboards/Makefile @@ -4,15 +4,10 @@ obj-y += prom.o bcsr.o platform.o obj-$(CONFIG_PM) += pm.o -obj-$(CONFIG_MIPS_PB1000) += pb1000/ -obj-$(CONFIG_MIPS_PB1100) += pb1100/ -obj-$(CONFIG_MIPS_PB1200) += pb1200/ -obj-$(CONFIG_MIPS_PB1500) += pb1500/ -obj-$(CONFIG_MIPS_PB1550) += pb1550/ -obj-$(CONFIG_MIPS_DB1000) += db1x00/ -obj-$(CONFIG_MIPS_DB1100) += db1x00/ -obj-$(CONFIG_MIPS_DB1200) += db1200/ -obj-$(CONFIG_MIPS_DB1500) += db1x00/ -obj-$(CONFIG_MIPS_DB1550) += db1x00/ -obj-$(CONFIG_MIPS_BOSPORUS) += db1x00/ -obj-$(CONFIG_MIPS_MIRAGE) += db1x00/ +obj-$(CONFIG_MIPS_PB1100) += pb1100.o +obj-$(CONFIG_MIPS_PB1500) += pb1500.o +obj-$(CONFIG_MIPS_PB1550) += pb1550.o +obj-$(CONFIG_MIPS_DB1000) += db1000.o +obj-$(CONFIG_MIPS_DB1200) += db1200.o +obj-$(CONFIG_MIPS_DB1300) += db1300.o +obj-$(CONFIG_MIPS_DB1550) += db1550.o diff --git a/arch/mips/alchemy/devboards/bcsr.c b/arch/mips/alchemy/devboards/bcsr.c index 463d2c4d944..1e83ce2e114 100644 --- a/arch/mips/alchemy/devboards/bcsr.c +++ b/arch/mips/alchemy/devboards/bcsr.c @@ -97,14 +97,9 @@ static void bcsr_csc_handler(unsigned int irq, struct irq_desc *d) enable_irq(irq); } -/* NOTE: both the enable and mask bits must be cleared, otherwise the - * CPLD generates tons of spurious interrupts (at least on my DB1200). - * -- mlau - */ static void bcsr_irq_mask(struct irq_data *d) { unsigned short v = 1 << (d->irq - bcsr_csc_base); - __raw_writew(v, bcsr_virt + BCSR_REG_INTCLR); __raw_writew(v, bcsr_virt + BCSR_REG_MASKCLR); wmb(); } @@ -112,7 +107,6 @@ static void bcsr_irq_mask(struct irq_data *d) static void bcsr_irq_maskack(struct irq_data *d) { unsigned short v = 1 << (d->irq - bcsr_csc_base); - __raw_writew(v, bcsr_virt + BCSR_REG_INTCLR); __raw_writew(v, bcsr_virt + BCSR_REG_MASKCLR); __raw_writew(v, bcsr_virt + BCSR_REG_INTSTAT); /* ack */ wmb(); @@ -121,7 +115,6 @@ static void bcsr_irq_maskack(struct irq_data *d) static void bcsr_irq_unmask(struct irq_data *d) { unsigned short v = 1 << (d->irq - bcsr_csc_base); - __raw_writew(v, bcsr_virt + BCSR_REG_INTSET); __raw_writew(v, bcsr_virt + BCSR_REG_MASKSET); wmb(); } @@ -137,9 +130,9 @@ void __init bcsr_init_irq(int csc_start, int csc_end, int hook_irq) { unsigned int irq; - /* mask & disable & ack all */ - __raw_writew(0xffff, bcsr_virt + BCSR_REG_INTCLR); + /* mask & enable & ack all */ __raw_writew(0xffff, bcsr_virt + BCSR_REG_MASKCLR); + __raw_writew(0xffff, bcsr_virt + BCSR_REG_INTSET); __raw_writew(0xffff, bcsr_virt + BCSR_REG_INTSTAT); wmb(); diff --git a/arch/mips/alchemy/devboards/db1000.c b/arch/mips/alchemy/devboards/db1000.c new file mode 100644 index 00000000000..1b81dbf6b80 --- /dev/null +++ b/arch/mips/alchemy/devboards/db1000.c @@ -0,0 +1,565 @@ +/* + * DBAu1000/1500/1100 board support + * + * Copyright 2000, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/dma-mapping.h> +#include <linux/gpio.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/leds.h> +#include <linux/mmc/host.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/pm.h> +#include <linux/spi/spi.h> +#include <linux/spi/spi_gpio.h> +#include <linux/spi/ads7846.h> +#include <asm/mach-au1x00/au1000.h> +#include <asm/mach-au1x00/au1000_dma.h> +#include <asm/mach-au1x00/au1100_mmc.h> +#include <asm/mach-db1x00/bcsr.h> +#include <asm/reboot.h> +#include <prom.h> +#include "platform.h" + +#define F_SWAPPED (bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1000_SWAPBOOT) + +struct pci_dev; + +static const char *board_type_str(void) +{ + switch (BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI))) { + case BCSR_WHOAMI_DB1000: + return "DB1000"; + case BCSR_WHOAMI_DB1500: + return "DB1500"; + case BCSR_WHOAMI_DB1100: + return "DB1100"; + default: + return "(unknown)"; + } +} + +const char *get_system_type(void) +{ + return board_type_str(); +} + +void __init board_setup(void) +{ + /* initialize board register space */ + bcsr_init(DB1000_BCSR_PHYS_ADDR, + DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS); + + printk(KERN_INFO "AMD Alchemy %s Board\n", board_type_str()); +} + + +static int db1500_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin) +{ + if ((slot < 12) || (slot > 13) || pin == 0) + return -1; + if (slot == 12) + return (pin == 1) ? AU1500_PCI_INTA : 0xff; + if (slot == 13) { + switch (pin) { + case 1: return AU1500_PCI_INTA; + case 2: return AU1500_PCI_INTB; + case 3: return AU1500_PCI_INTC; + case 4: return AU1500_PCI_INTD; + } + } + return -1; +} + +static struct resource alchemy_pci_host_res[] = { + [0] = { + .start = AU1500_PCI_PHYS_ADDR, + .end = AU1500_PCI_PHYS_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct alchemy_pci_platdata db1500_pci_pd = { + .board_map_irq = db1500_map_pci_irq, +}; + +static struct platform_device db1500_pci_host_dev = { + .dev.platform_data = &db1500_pci_pd, + .name = "alchemy-pci", + .id = 0, + .num_resources = ARRAY_SIZE(alchemy_pci_host_res), + .resource = alchemy_pci_host_res, +}; + +static int __init db1500_pci_init(void) +{ + if (BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI)) == BCSR_WHOAMI_DB1500) + return platform_device_register(&db1500_pci_host_dev); + return 0; +} +/* must be arch_initcall; MIPS PCI scans busses in a subsys_initcall */ +arch_initcall(db1500_pci_init); + + +static struct resource au1100_lcd_resources[] = { + [0] = { + .start = AU1100_LCD_PHYS_ADDR, + .end = AU1100_LCD_PHYS_ADDR + 0x800 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1100_LCD_INT, + .end = AU1100_LCD_INT, + .flags = IORESOURCE_IRQ, + } +}; + +static u64 au1100_lcd_dmamask = DMA_BIT_MASK(32); + +static struct platform_device au1100_lcd_device = { + .name = "au1100-lcd", + .id = 0, + .dev = { + .dma_mask = &au1100_lcd_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = ARRAY_SIZE(au1100_lcd_resources), + .resource = au1100_lcd_resources, +}; + +static struct resource alchemy_ac97c_res[] = { + [0] = { + .start = AU1000_AC97_PHYS_ADDR, + .end = AU1000_AC97_PHYS_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMA_ID_AC97C_TX, + .end = DMA_ID_AC97C_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMA_ID_AC97C_RX, + .end = DMA_ID_AC97C_RX, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device alchemy_ac97c_dev = { + .name = "alchemy-ac97c", + .id = -1, + .resource = alchemy_ac97c_res, + .num_resources = ARRAY_SIZE(alchemy_ac97c_res), +}; + +static struct platform_device alchemy_ac97c_dma_dev = { + .name = "alchemy-pcm-dma", + .id = 0, +}; + +static struct platform_device db1x00_codec_dev = { + .name = "ac97-codec", + .id = -1, +}; + +static struct platform_device db1x00_audio_dev = { + .name = "db1000-audio", +}; + +/******************************************************************************/ + +static irqreturn_t db1100_mmc_cd(int irq, void *ptr) +{ + void (*mmc_cd)(struct mmc_host *, unsigned long); + /* link against CONFIG_MMC=m */ + mmc_cd = symbol_get(mmc_detect_change); + mmc_cd(ptr, msecs_to_jiffies(500)); + symbol_put(mmc_detect_change); + + return IRQ_HANDLED; +} + +static int db1100_mmc_cd_setup(void *mmc_host, int en) +{ + int ret = 0; + + if (en) { + irq_set_irq_type(AU1100_GPIO19_INT, IRQ_TYPE_EDGE_BOTH); + ret = request_irq(AU1100_GPIO19_INT, db1100_mmc_cd, 0, + "sd0_cd", mmc_host); + } else + free_irq(AU1100_GPIO19_INT, mmc_host); + return ret; +} + +static int db1100_mmc1_cd_setup(void *mmc_host, int en) +{ + int ret = 0; + + if (en) { + irq_set_irq_type(AU1100_GPIO20_INT, IRQ_TYPE_EDGE_BOTH); + ret = request_irq(AU1100_GPIO20_INT, db1100_mmc_cd, 0, + "sd1_cd", mmc_host); + } else + free_irq(AU1100_GPIO20_INT, mmc_host); + return ret; +} + +static int db1100_mmc_card_readonly(void *mmc_host) +{ + /* testing suggests that this bit is inverted */ + return (bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD0WP) ? 0 : 1; +} + +static int db1100_mmc_card_inserted(void *mmc_host) +{ + return !alchemy_gpio_get_value(19); +} + +static void db1100_mmc_set_power(void *mmc_host, int state) +{ + if (state) { + bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD0PWR); + msleep(400); /* stabilization time */ + } else + bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD0PWR, 0); +} + +static void db1100_mmcled_set(struct led_classdev *led, enum led_brightness b) +{ + if (b != LED_OFF) + bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED0, 0); + else + bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED0); +} + +static struct led_classdev db1100_mmc_led = { + .brightness_set = db1100_mmcled_set, +}; + +static int db1100_mmc1_card_readonly(void *mmc_host) +{ + return (bcsr_read(BCSR_BOARD) & BCSR_BOARD_SD1WP) ? 1 : 0; +} + +static int db1100_mmc1_card_inserted(void *mmc_host) +{ + return !alchemy_gpio_get_value(20); +} + +static void db1100_mmc1_set_power(void *mmc_host, int state) +{ + if (state) { + bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD1PWR); + msleep(400); /* stabilization time */ + } else + bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD1PWR, 0); +} + +static void db1100_mmc1led_set(struct led_classdev *led, enum led_brightness b) +{ + if (b != LED_OFF) + bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED1, 0); + else + bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED1); +} + +static struct led_classdev db1100_mmc1_led = { + .brightness_set = db1100_mmc1led_set, +}; + +static struct au1xmmc_platform_data db1100_mmc_platdata[2] = { + [0] = { + .cd_setup = db1100_mmc_cd_setup, + .set_power = db1100_mmc_set_power, + .card_inserted = db1100_mmc_card_inserted, + .card_readonly = db1100_mmc_card_readonly, + .led = &db1100_mmc_led, + }, + [1] = { + .cd_setup = db1100_mmc1_cd_setup, + .set_power = db1100_mmc1_set_power, + .card_inserted = db1100_mmc1_card_inserted, + .card_readonly = db1100_mmc1_card_readonly, + .led = &db1100_mmc1_led, + }, +}; + +static struct resource au1100_mmc0_resources[] = { + [0] = { + .start = AU1100_SD0_PHYS_ADDR, + .end = AU1100_SD0_PHYS_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1100_SD_INT, + .end = AU1100_SD_INT, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = DMA_ID_SD0_TX, + .end = DMA_ID_SD0_TX, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = DMA_ID_SD0_RX, + .end = DMA_ID_SD0_RX, + .flags = IORESOURCE_DMA, + } +}; + +static u64 au1xxx_mmc_dmamask = DMA_BIT_MASK(32); + +static struct platform_device db1100_mmc0_dev = { + .name = "au1xxx-mmc", + .id = 0, + .dev = { + .dma_mask = &au1xxx_mmc_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &db1100_mmc_platdata[0], + }, + .num_resources = ARRAY_SIZE(au1100_mmc0_resources), + .resource = au1100_mmc0_resources, +}; + +static struct resource au1100_mmc1_res[] = { + [0] = { + .start = AU1100_SD1_PHYS_ADDR, + .end = AU1100_SD1_PHYS_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1100_SD_INT, + .end = AU1100_SD_INT, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = DMA_ID_SD1_TX, + .end = DMA_ID_SD1_TX, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = DMA_ID_SD1_RX, + .end = DMA_ID_SD1_RX, + .flags = IORESOURCE_DMA, + } +}; + +static struct platform_device db1100_mmc1_dev = { + .name = "au1xxx-mmc", + .id = 1, + .dev = { + .dma_mask = &au1xxx_mmc_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &db1100_mmc_platdata[1], + }, + .num_resources = ARRAY_SIZE(au1100_mmc1_res), + .resource = au1100_mmc1_res, +}; + +/******************************************************************************/ + +static void db1000_irda_set_phy_mode(int mode) +{ + unsigned short mask = BCSR_RESETS_IRDA_MODE_MASK | BCSR_RESETS_FIR_SEL; + + switch (mode) { + case AU1000_IRDA_PHY_MODE_OFF: + bcsr_mod(BCSR_RESETS, mask, BCSR_RESETS_IRDA_MODE_OFF); + break; + case AU1000_IRDA_PHY_MODE_SIR: + bcsr_mod(BCSR_RESETS, mask, BCSR_RESETS_IRDA_MODE_FULL); + break; + case AU1000_IRDA_PHY_MODE_FIR: + bcsr_mod(BCSR_RESETS, mask, BCSR_RESETS_IRDA_MODE_FULL | + BCSR_RESETS_FIR_SEL); + break; + } +} + +static struct au1k_irda_platform_data db1000_irda_platdata = { + .set_phy_mode = db1000_irda_set_phy_mode, +}; + +static struct resource au1000_irda_res[] = { + [0] = { + .start = AU1000_IRDA_PHYS_ADDR, + .end = AU1000_IRDA_PHYS_ADDR + 0x0fff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1000_IRDA_TX_INT, + .end = AU1000_IRDA_TX_INT, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = AU1000_IRDA_RX_INT, + .end = AU1000_IRDA_RX_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device db1000_irda_dev = { + .name = "au1000-irda", + .id = -1, + .dev = { + .platform_data = &db1000_irda_platdata, + }, + .resource = au1000_irda_res, + .num_resources = ARRAY_SIZE(au1000_irda_res), +}; + +/******************************************************************************/ + +static struct ads7846_platform_data db1100_touch_pd = { + .model = 7846, + .vref_mv = 3300, + .gpio_pendown = 21, +}; + +static struct spi_gpio_platform_data db1100_spictl_pd = { + .sck = 209, + .mosi = 208, + .miso = 207, + .num_chipselect = 1, +}; + +static struct spi_board_info db1100_spi_info[] __initdata = { + [0] = { + .modalias = "ads7846", + .max_speed_hz = 3250000, + .bus_num = 0, + .chip_select = 0, + .mode = 0, + .irq = AU1100_GPIO21_INT, + .platform_data = &db1100_touch_pd, + .controller_data = (void *)210, /* for spi_gpio: CS# GPIO210 */ + }, +}; + +static struct platform_device db1100_spi_dev = { + .name = "spi_gpio", + .id = 0, + .dev = { + .platform_data = &db1100_spictl_pd, + }, +}; + + +static struct platform_device *db1x00_devs[] = { + &db1x00_codec_dev, + &alchemy_ac97c_dma_dev, + &alchemy_ac97c_dev, + &db1x00_audio_dev, +}; + +static struct platform_device *db1000_devs[] = { + &db1000_irda_dev, +}; + +static struct platform_device *db1100_devs[] = { + &au1100_lcd_device, + &db1100_mmc0_dev, + &db1100_mmc1_dev, + &db1000_irda_dev, + &db1100_spi_dev, +}; + +static int __init db1000_dev_init(void) +{ + int board = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI)); + int c0, c1, d0, d1, s0, s1; + unsigned long pfc; + + if (board == BCSR_WHOAMI_DB1500) { + c0 = AU1500_GPIO2_INT; + c1 = AU1500_GPIO5_INT; + d0 = AU1500_GPIO0_INT; + d1 = AU1500_GPIO3_INT; + s0 = AU1500_GPIO1_INT; + s1 = AU1500_GPIO4_INT; + } else if (board == BCSR_WHOAMI_DB1100) { + c0 = AU1100_GPIO2_INT; + c1 = AU1100_GPIO5_INT; + d0 = AU1100_GPIO0_INT; + d1 = AU1100_GPIO3_INT; + s0 = AU1100_GPIO1_INT; + s1 = AU1100_GPIO4_INT; + + gpio_direction_input(19); /* sd0 cd# */ + gpio_direction_input(20); /* sd1 cd# */ + gpio_direction_input(21); /* touch pendown# */ + gpio_direction_input(207); /* SPI MISO */ + gpio_direction_output(208, 0); /* SPI MOSI */ + gpio_direction_output(209, 1); /* SPI SCK */ + gpio_direction_output(210, 1); /* SPI CS# */ + + /* spi_gpio on SSI0 pins */ + pfc = __raw_readl((void __iomem *)SYS_PINFUNC); + pfc |= (1 << 0); /* SSI0 pins as GPIOs */ + __raw_writel(pfc, (void __iomem *)SYS_PINFUNC); + wmb(); + + spi_register_board_info(db1100_spi_info, + ARRAY_SIZE(db1100_spi_info)); + + platform_add_devices(db1100_devs, ARRAY_SIZE(db1100_devs)); + } else if (board == BCSR_WHOAMI_DB1000) { + c0 = AU1000_GPIO2_INT; + c1 = AU1000_GPIO5_INT; + d0 = AU1000_GPIO0_INT; + d1 = AU1000_GPIO3_INT; + s0 = AU1000_GPIO1_INT; + s1 = AU1000_GPIO4_INT; + platform_add_devices(db1000_devs, ARRAY_SIZE(db1000_devs)); + } else + return 0; /* unknown board, no further dev setup to do */ + + irq_set_irq_type(d0, IRQ_TYPE_EDGE_BOTH); + irq_set_irq_type(d1, IRQ_TYPE_EDGE_BOTH); + irq_set_irq_type(c0, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(c1, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(s0, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(s1, IRQ_TYPE_LEVEL_LOW); + + db1x_register_pcmcia_socket( + AU1000_PCMCIA_ATTR_PHYS_ADDR, + AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, + AU1000_PCMCIA_MEM_PHYS_ADDR, + AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, + AU1000_PCMCIA_IO_PHYS_ADDR, + AU1000_PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1, + c0, d0, /*s0*/0, 0, 0); + + db1x_register_pcmcia_socket( + AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004000000, + AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004400000 - 1, + AU1000_PCMCIA_MEM_PHYS_ADDR + 0x004000000, + AU1000_PCMCIA_MEM_PHYS_ADDR + 0x004400000 - 1, + AU1000_PCMCIA_IO_PHYS_ADDR + 0x004000000, + AU1000_PCMCIA_IO_PHYS_ADDR + 0x004010000 - 1, + c1, d1, /*s1*/0, 0, 1); + + platform_add_devices(db1x00_devs, ARRAY_SIZE(db1x00_devs)); + db1x_register_norflash(32 << 20, 4 /* 32bit */, F_SWAPPED); + return 0; +} +device_initcall(db1000_dev_init); diff --git a/arch/mips/alchemy/devboards/db1200/platform.c b/arch/mips/alchemy/devboards/db1200.c index c61867c93c4..a83302b96c0 100644 --- a/arch/mips/alchemy/devboards/db1200/platform.c +++ b/arch/mips/alchemy/devboards/db1200.c @@ -1,7 +1,7 @@ /* - * DBAu1200 board platform device registration + * DBAu1200/PBAu1200 board platform device registration * - * Copyright (C) 2008-2009 Manuel Lauss + * Copyright (C) 2008-2011 Manuel Lauss * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -22,6 +22,7 @@ #include <linux/gpio.h> #include <linux/i2c.h> #include <linux/init.h> +#include <linux/interrupt.h> #include <linux/io.h> #include <linux/leds.h> #include <linux/mmc/host.h> @@ -33,18 +34,116 @@ #include <linux/spi/spi.h> #include <linux/spi/flash.h> #include <linux/smc91x.h> - +#include <asm/mach-au1x00/au1000.h> #include <asm/mach-au1x00/au1100_mmc.h> #include <asm/mach-au1x00/au1xxx_dbdma.h> +#include <asm/mach-au1x00/au1200fb.h> #include <asm/mach-au1x00/au1550_spi.h> #include <asm/mach-db1x00/bcsr.h> #include <asm/mach-db1x00/db1200.h> -#include "../platform.h" +#include "platform.h" + +static const char *board_type_str(void) +{ + switch (BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI))) { + case BCSR_WHOAMI_PB1200_DDR1: + case BCSR_WHOAMI_PB1200_DDR2: + return "PB1200"; + case BCSR_WHOAMI_DB1200: + return "DB1200"; + default: + return "(unknown)"; + } +} + +const char *get_system_type(void) +{ + return board_type_str(); +} + +static int __init detect_board(void) +{ + int bid; + + /* try the DB1200 first */ + bcsr_init(DB1200_BCSR_PHYS_ADDR, + DB1200_BCSR_PHYS_ADDR + DB1200_BCSR_HEXLED_OFS); + if (BCSR_WHOAMI_DB1200 == BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI))) { + unsigned short t = bcsr_read(BCSR_HEXLEDS); + bcsr_write(BCSR_HEXLEDS, ~t); + if (bcsr_read(BCSR_HEXLEDS) != t) { + bcsr_write(BCSR_HEXLEDS, t); + return 0; + } + } + + /* okay, try the PB1200 then */ + bcsr_init(PB1200_BCSR_PHYS_ADDR, + PB1200_BCSR_PHYS_ADDR + PB1200_BCSR_HEXLED_OFS); + bid = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI)); + if ((bid == BCSR_WHOAMI_PB1200_DDR1) || + (bid == BCSR_WHOAMI_PB1200_DDR2)) { + unsigned short t = bcsr_read(BCSR_HEXLEDS); + bcsr_write(BCSR_HEXLEDS, ~t); + if (bcsr_read(BCSR_HEXLEDS) != t) { + bcsr_write(BCSR_HEXLEDS, t); + return 0; + } + } + + return 1; /* it's neither */ +} + +void __init board_setup(void) +{ + unsigned long freq0, clksrc, div, pfc; + unsigned short whoami; + + if (detect_board()) { + printk(KERN_ERR "NOT running on a DB1200/PB1200 board!\n"); + return; + } + + whoami = bcsr_read(BCSR_WHOAMI); + printk(KERN_INFO "Alchemy/AMD/RMI %s Board, CPLD Rev %d" + " Board-ID %d Daughtercard ID %d\n", board_type_str(), + (whoami >> 4) & 0xf, (whoami >> 8) & 0xf, whoami & 0xf); + + /* SMBus/SPI on PSC0, Audio on PSC1 */ + pfc = __raw_readl((void __iomem *)SYS_PINFUNC); + pfc &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B); + pfc &= ~(SYS_PINFUNC_P1A | SYS_PINFUNC_P1B | SYS_PINFUNC_FS3); + pfc |= SYS_PINFUNC_P1C; /* SPI is configured later */ + __raw_writel(pfc, (void __iomem *)SYS_PINFUNC); + wmb(); + + /* Clock configurations: PSC0: ~50MHz via Clkgen0, derived from + * CPU clock; all other clock generators off/unused. + */ + div = (get_au1x00_speed() + 25000000) / 50000000; + if (div & 1) + div++; + div = ((div >> 1) - 1) & 0xff; + + freq0 = div << SYS_FC_FRDIV0_BIT; + __raw_writel(freq0, (void __iomem *)SYS_FREQCTRL0); + wmb(); + freq0 |= SYS_FC_FE0; /* enable F0 */ + __raw_writel(freq0, (void __iomem *)SYS_FREQCTRL0); + wmb(); + + /* psc0_intclk comes 1:1 from F0 */ + clksrc = SYS_CS_MUX_FQ0 << SYS_CS_ME0_BIT; + __raw_writel(clksrc, (void __iomem *)SYS_CLKSRC); + wmb(); +} + +/******************************************************************************/ static struct mtd_partition db1200_spiflash_parts[] = { { - .name = "DB1200 SPI flash", + .name = "spi_flash", .offset = 0, .size = MTDPART_SIZ_FULL, }, @@ -78,18 +177,9 @@ static struct spi_board_info db1200_spi_devs[] __initdata = { }; static struct i2c_board_info db1200_i2c_devs[] __initdata = { - { - /* AT24C04-10 I2C eeprom */ - I2C_BOARD_INFO("24c04", 0x52), - }, - { - /* Philips NE1619 temp/voltage sensor (adm1025 drv) */ - I2C_BOARD_INFO("ne1619", 0x2d), - }, - { - /* I2S audio codec WM8731 */ - I2C_BOARD_INFO("wm8731", 0x1b), - }, + { I2C_BOARD_INFO("24c04", 0x52), }, /* AT24C04-10 I2C eeprom */ + { I2C_BOARD_INFO("ne1619", 0x2d), }, /* adm1025-compat hwmon */ + { I2C_BOARD_INFO("wm8731", 0x1b), }, /* I2S audio codec WM8731 */ }; /**********************************************************************/ @@ -206,7 +296,7 @@ static struct platform_device db1200_eth_dev = { static struct resource db1200_ide_res[] = { [0] = { .start = DB1200_IDE_PHYS_ADDR, - .end = DB1200_IDE_PHYS_ADDR + DB1200_IDE_PHYS_LEN - 1, + .end = DB1200_IDE_PHYS_ADDR + DB1200_IDE_PHYS_LEN - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -221,13 +311,13 @@ static struct resource db1200_ide_res[] = { }, }; -static u64 ide_dmamask = DMA_BIT_MASK(32); +static u64 au1200_ide_dmamask = DMA_BIT_MASK(32); static struct platform_device db1200_ide_dev = { .name = "au1200-ide", .id = 0, .dev = { - .dma_mask = &ide_dmamask, + .dma_mask = &au1200_ide_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), }, .num_resources = ARRAY_SIZE(db1200_ide_res), @@ -236,13 +326,6 @@ static struct platform_device db1200_ide_dev = { /**********************************************************************/ -static struct platform_device db1200_rtc_dev = { - .name = "rtc-au1xxx", - .id = -1, -}; - -/**********************************************************************/ - /* SD carddetects: they're supposed to be edge-triggered, but ack * doesn't seem to work (CPLD Rev 2). Instead, the screaming one * is disabled and its counterpart enabled. The 500ms timeout is @@ -276,12 +359,12 @@ static int db1200_mmc_cd_setup(void *mmc_host, int en) if (en) { ret = request_irq(DB1200_SD0_INSERT_INT, db1200_mmc_cd, - IRQF_DISABLED, "sd_insert", mmc_host); + 0, "sd_insert", mmc_host); if (ret) goto out; ret = request_irq(DB1200_SD0_EJECT_INT, db1200_mmc_cd, - IRQF_DISABLED, "sd_eject", mmc_host); + 0, "sd_eject", mmc_host); if (ret) { free_irq(DB1200_SD0_INSERT_INT, mmc_host); goto out; @@ -333,12 +416,109 @@ static struct led_classdev db1200_mmc_led = { .brightness_set = db1200_mmcled_set, }; -static struct au1xmmc_platform_data db1200mmc_platdata = { - .cd_setup = db1200_mmc_cd_setup, - .set_power = db1200_mmc_set_power, - .card_inserted = db1200_mmc_card_inserted, - .card_readonly = db1200_mmc_card_readonly, - .led = &db1200_mmc_led, +/* -- */ + +static irqreturn_t pb1200_mmc1_cd(int irq, void *ptr) +{ + void(*mmc_cd)(struct mmc_host *, unsigned long); + + if (irq == PB1200_SD1_INSERT_INT) { + disable_irq_nosync(PB1200_SD1_INSERT_INT); + enable_irq(PB1200_SD1_EJECT_INT); + } else { + disable_irq_nosync(PB1200_SD1_EJECT_INT); + enable_irq(PB1200_SD1_INSERT_INT); + } + + /* link against CONFIG_MMC=m */ + mmc_cd = symbol_get(mmc_detect_change); + if (mmc_cd) { + mmc_cd(ptr, msecs_to_jiffies(500)); + symbol_put(mmc_detect_change); + } + + return IRQ_HANDLED; +} + +static int pb1200_mmc1_cd_setup(void *mmc_host, int en) +{ + int ret; + + if (en) { + ret = request_irq(PB1200_SD1_INSERT_INT, pb1200_mmc1_cd, 0, + "sd1_insert", mmc_host); + if (ret) + goto out; + + ret = request_irq(PB1200_SD1_EJECT_INT, pb1200_mmc1_cd, 0, + "sd1_eject", mmc_host); + if (ret) { + free_irq(PB1200_SD1_INSERT_INT, mmc_host); + goto out; + } + + if (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD1INSERT) + enable_irq(PB1200_SD1_EJECT_INT); + else + enable_irq(PB1200_SD1_INSERT_INT); + + } else { + free_irq(PB1200_SD1_INSERT_INT, mmc_host); + free_irq(PB1200_SD1_EJECT_INT, mmc_host); + } + ret = 0; +out: + return ret; +} + +static void pb1200_mmc1led_set(struct led_classdev *led, + enum led_brightness brightness) +{ + if (brightness != LED_OFF) + bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED1, 0); + else + bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED1); +} + +static struct led_classdev pb1200_mmc1_led = { + .brightness_set = pb1200_mmc1led_set, +}; + +static void pb1200_mmc1_set_power(void *mmc_host, int state) +{ + if (state) { + bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD1PWR); + msleep(400); /* stabilization time */ + } else + bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD1PWR, 0); +} + +static int pb1200_mmc1_card_readonly(void *mmc_host) +{ + return (bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD1WP) ? 1 : 0; +} + +static int pb1200_mmc1_card_inserted(void *mmc_host) +{ + return (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD1INSERT) ? 1 : 0; +} + + +static struct au1xmmc_platform_data db1200_mmc_platdata[2] = { + [0] = { + .cd_setup = db1200_mmc_cd_setup, + .set_power = db1200_mmc_set_power, + .card_inserted = db1200_mmc_card_inserted, + .card_readonly = db1200_mmc_card_readonly, + .led = &db1200_mmc_led, + }, + [1] = { + .cd_setup = pb1200_mmc1_cd_setup, + .set_power = pb1200_mmc1_set_power, + .card_inserted = pb1200_mmc1_card_inserted, + .card_readonly = pb1200_mmc1_card_readonly, + .led = &pb1200_mmc1_led, + }, }; static struct resource au1200_mmc0_resources[] = { @@ -372,14 +552,76 @@ static struct platform_device db1200_mmc0_dev = { .dev = { .dma_mask = &au1xxx_mmc_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &db1200mmc_platdata, + .platform_data = &db1200_mmc_platdata[0], }, .num_resources = ARRAY_SIZE(au1200_mmc0_resources), .resource = au1200_mmc0_resources, }; +static struct resource au1200_mmc1_res[] = { + [0] = { + .start = AU1100_SD1_PHYS_ADDR, + .end = AU1100_SD1_PHYS_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1200_SD_INT, + .end = AU1200_SD_INT, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = AU1200_DSCR_CMD0_SDMS_TX1, + .end = AU1200_DSCR_CMD0_SDMS_TX1, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = AU1200_DSCR_CMD0_SDMS_RX1, + .end = AU1200_DSCR_CMD0_SDMS_RX1, + .flags = IORESOURCE_DMA, + } +}; + +static struct platform_device pb1200_mmc1_dev = { + .name = "au1xxx-mmc", + .id = 1, + .dev = { + .dma_mask = &au1xxx_mmc_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &db1200_mmc_platdata[1], + }, + .num_resources = ARRAY_SIZE(au1200_mmc1_res), + .resource = au1200_mmc1_res, +}; + /**********************************************************************/ +static int db1200fb_panel_index(void) +{ + return (bcsr_read(BCSR_SWITCHES) >> 8) & 0x0f; +} + +static int db1200fb_panel_init(void) +{ + /* Apply power */ + bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | + BCSR_BOARD_LCDBL); + return 0; +} + +static int db1200fb_panel_shutdown(void) +{ + /* Remove power */ + bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | + BCSR_BOARD_LCDBL, 0); + return 0; +} + +static struct au1200fb_platdata db1200fb_pd = { + .panel_index = db1200fb_panel_index, + .panel_init = db1200fb_panel_init, + .panel_shutdown = db1200fb_panel_shutdown, +}; + static struct resource au1200_lcd_res[] = { [0] = { .start = AU1200_LCD_PHYS_ADDR, @@ -401,6 +643,7 @@ static struct platform_device au1200_lcd_dev = { .dev = { .dma_mask = &au1200_lcd_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &db1200fb_pd, }, .num_resources = ARRAY_SIZE(au1200_lcd_res), .resource = au1200_lcd_res, @@ -519,7 +762,6 @@ static struct platform_device *db1200_devs[] __initdata = { &db1200_mmc0_dev, &au1200_lcd_dev, &db1200_eth_dev, - &db1200_rtc_dev, &db1200_nand_dev, &db1200_audiodma_dev, &db1200_audio_dev, @@ -527,11 +769,62 @@ static struct platform_device *db1200_devs[] __initdata = { &db1200_sound_dev, }; +static struct platform_device *pb1200_devs[] __initdata = { + &pb1200_mmc1_dev, +}; + +/* Some peripheral base addresses differ on the PB1200 */ +static int __init pb1200_res_fixup(void) +{ + /* CPLD Revs earlier than 4 cause problems */ + if (BCSR_WHOAMI_CPLD(bcsr_read(BCSR_WHOAMI)) <= 3) { + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "PB1200 must be at CPLD rev 4. Please have\n"); + printk(KERN_ERR "the board updated to latest revisions.\n"); + printk(KERN_ERR "This software will not work reliably\n"); + printk(KERN_ERR "on anything older than CPLD rev 4.!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + return 1; + } + + db1200_nand_res[0].start = PB1200_NAND_PHYS_ADDR; + db1200_nand_res[0].end = PB1200_NAND_PHYS_ADDR + 0xff; + db1200_ide_res[0].start = PB1200_IDE_PHYS_ADDR; + db1200_ide_res[0].end = PB1200_IDE_PHYS_ADDR + DB1200_IDE_PHYS_LEN - 1; + db1200_eth_res[0].start = PB1200_ETH_PHYS_ADDR; + db1200_eth_res[0].end = PB1200_ETH_PHYS_ADDR + 0xff; + return 0; +} + static int __init db1200_dev_init(void) { unsigned long pfc; unsigned short sw; - int swapped; + int swapped, bid; + + bid = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI)); + if ((bid == BCSR_WHOAMI_PB1200_DDR1) || + (bid == BCSR_WHOAMI_PB1200_DDR2)) { + if (pb1200_res_fixup()) + return -ENODEV; + } + + /* GPIO7 is low-level triggered CPLD cascade */ + irq_set_irq_type(AU1200_GPIO7_INT, IRQ_TYPE_LEVEL_LOW); + bcsr_init_irq(DB1200_INT_BEGIN, DB1200_INT_END, AU1200_GPIO7_INT); + + /* insert/eject pairs: one of both is always screaming. To avoid + * issues they must not be automatically enabled when initially + * requested. + */ + irq_set_status_flags(DB1200_SD0_INSERT_INT, IRQ_NOAUTOEN); + irq_set_status_flags(DB1200_SD0_EJECT_INT, IRQ_NOAUTOEN); + irq_set_status_flags(DB1200_PC0_INSERT_INT, IRQ_NOAUTOEN); + irq_set_status_flags(DB1200_PC0_EJECT_INT, IRQ_NOAUTOEN); + irq_set_status_flags(DB1200_PC1_INSERT_INT, IRQ_NOAUTOEN); + irq_set_status_flags(DB1200_PC1_EJECT_INT, IRQ_NOAUTOEN); i2c_register_board_info(0, db1200_i2c_devs, ARRAY_SIZE(db1200_i2c_devs)); @@ -540,6 +833,7 @@ static int __init db1200_dev_init(void) /* SWITCHES: S6.8 I2C/SPI selector (OFF=I2C ON=SPI) * S6.7 AC97/I2S selector (OFF=AC97 ON=I2S) + * or S12 on the PB1200. */ /* NOTE: GPIO215 controls OTG VBUS supply. In SPI mode however @@ -554,7 +848,7 @@ static int __init db1200_dev_init(void) gpio_request(215, "otg-vbus"); gpio_direction_output(215, 1); - printk(KERN_INFO "DB1200 device configuration:\n"); + printk(KERN_INFO "%s device configuration:\n", board_type_str()); sw = bcsr_read(BCSR_SWITCHES); if (sw & BCSR_SWITCHES_DIP_8) { @@ -595,7 +889,7 @@ static int __init db1200_dev_init(void) /* Audio PSC clock is supplied externally. (FIXME: platdata!!) */ __raw_writel(PSC_SEL_CLK_SERCLK, - (void __iomem *)KSEG1ADDR(AU1550_PSC1_PHYS_ADDR) + PSC_SEL_OFFSET); + (void __iomem *)KSEG1ADDR(AU1550_PSC1_PHYS_ADDR) + PSC_SEL_OFFSET); wmb(); db1x_register_pcmcia_socket( @@ -621,28 +915,13 @@ static int __init db1200_dev_init(void) swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1200_SWAPBOOT; db1x_register_norflash(64 << 20, 2, swapped); - return platform_add_devices(db1200_devs, ARRAY_SIZE(db1200_devs)); -} -device_initcall(db1200_dev_init); - -/* au1200fb calls these: STERBT EINEN TRAGISCHEN TOD!!! */ -int board_au1200fb_panel(void) -{ - return (bcsr_read(BCSR_SWITCHES) >> 8) & 0x0f; -} + platform_add_devices(db1200_devs, ARRAY_SIZE(db1200_devs)); -int board_au1200fb_panel_init(void) -{ - /* Apply power */ - bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | - BCSR_BOARD_LCDBL); - return 0; -} + /* PB1200 is a DB1200 with a 2nd MMC and Camera connector */ + if ((bid == BCSR_WHOAMI_PB1200_DDR1) || + (bid == BCSR_WHOAMI_PB1200_DDR2)) + platform_add_devices(pb1200_devs, ARRAY_SIZE(pb1200_devs)); -int board_au1200fb_panel_shutdown(void) -{ - /* Remove power */ - bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | - BCSR_BOARD_LCDBL, 0); return 0; } +device_initcall(db1200_dev_init); diff --git a/arch/mips/alchemy/devboards/db1200/Makefile b/arch/mips/alchemy/devboards/db1200/Makefile deleted file mode 100644 index 17840a5e273..00000000000 --- a/arch/mips/alchemy/devboards/db1200/Makefile +++ /dev/null @@ -1 +0,0 @@ -obj-y += setup.o platform.o diff --git a/arch/mips/alchemy/devboards/db1200/setup.c b/arch/mips/alchemy/devboards/db1200/setup.c deleted file mode 100644 index 4a8980027ec..00000000000 --- a/arch/mips/alchemy/devboards/db1200/setup.c +++ /dev/null @@ -1,81 +0,0 @@ -/* - * Alchemy/AMD/RMI DB1200 board setup. - * - * Licensed under the terms outlined in the file COPYING in the root of - * this source archive. - */ - -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/io.h> -#include <linux/kernel.h> -#include <asm/mach-au1x00/au1000.h> -#include <asm/mach-db1x00/bcsr.h> -#include <asm/mach-db1x00/db1200.h> - -const char *get_system_type(void) -{ - return "Alchemy Db1200"; -} - -void __init board_setup(void) -{ - unsigned long freq0, clksrc, div, pfc; - unsigned short whoami; - - bcsr_init(DB1200_BCSR_PHYS_ADDR, - DB1200_BCSR_PHYS_ADDR + DB1200_BCSR_HEXLED_OFS); - - whoami = bcsr_read(BCSR_WHOAMI); - printk(KERN_INFO "Alchemy/AMD/RMI DB1200 Board, CPLD Rev %d" - " Board-ID %d Daughtercard ID %d\n", - (whoami >> 4) & 0xf, (whoami >> 8) & 0xf, whoami & 0xf); - - /* SMBus/SPI on PSC0, Audio on PSC1 */ - pfc = __raw_readl((void __iomem *)SYS_PINFUNC); - pfc &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B); - pfc &= ~(SYS_PINFUNC_P1A | SYS_PINFUNC_P1B | SYS_PINFUNC_FS3); - pfc |= SYS_PINFUNC_P1C; /* SPI is configured later */ - __raw_writel(pfc, (void __iomem *)SYS_PINFUNC); - wmb(); - - /* Clock configurations: PSC0: ~50MHz via Clkgen0, derived from - * CPU clock; all other clock generators off/unused. - */ - div = (get_au1x00_speed() + 25000000) / 50000000; - if (div & 1) - div++; - div = ((div >> 1) - 1) & 0xff; - - freq0 = div << SYS_FC_FRDIV0_BIT; - __raw_writel(freq0, (void __iomem *)SYS_FREQCTRL0); - wmb(); - freq0 |= SYS_FC_FE0; /* enable F0 */ - __raw_writel(freq0, (void __iomem *)SYS_FREQCTRL0); - wmb(); - - /* psc0_intclk comes 1:1 from F0 */ - clksrc = SYS_CS_MUX_FQ0 << SYS_CS_ME0_BIT; - __raw_writel(clksrc, (void __iomem *)SYS_CLKSRC); - wmb(); -} - -static int __init db1200_arch_init(void) -{ - /* GPIO7 is low-level triggered CPLD cascade */ - irq_set_irq_type(AU1200_GPIO7_INT, IRQF_TRIGGER_LOW); - bcsr_init_irq(DB1200_INT_BEGIN, DB1200_INT_END, AU1200_GPIO7_INT); - - /* insert/eject pairs: one of both is always screaming. To avoid - * issues they must not be automatically enabled when initially - * requested. - */ - irq_set_status_flags(DB1200_SD0_INSERT_INT, IRQ_NOAUTOEN); - irq_set_status_flags(DB1200_SD0_EJECT_INT, IRQ_NOAUTOEN); - irq_set_status_flags(DB1200_PC0_INSERT_INT, IRQ_NOAUTOEN); - irq_set_status_flags(DB1200_PC0_EJECT_INT, IRQ_NOAUTOEN); - irq_set_status_flags(DB1200_PC1_INSERT_INT, IRQ_NOAUTOEN); - irq_set_status_flags(DB1200_PC1_EJECT_INT, IRQ_NOAUTOEN); - return 0; -} -arch_initcall(db1200_arch_init); diff --git a/arch/mips/alchemy/devboards/db1300.c b/arch/mips/alchemy/devboards/db1300.c new file mode 100644 index 00000000000..0893f2af0d0 --- /dev/null +++ b/arch/mips/alchemy/devboards/db1300.c @@ -0,0 +1,785 @@ +/* + * DBAu1300 init and platform device setup. + * + * (c) 2009 Manuel Lauss <manuel.lauss@googlemail.com> + */ + +#include <linux/dma-mapping.h> +#include <linux/gpio.h> +#include <linux/gpio_keys.h> +#include <linux/init.h> +#include <linux/input.h> /* KEY_* codes */ +#include <linux/i2c.h> +#include <linux/io.h> +#include <linux/leds.h> +#include <linux/ata_platform.h> +#include <linux/mmc/host.h> +#include <linux/module.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/partitions.h> +#include <linux/platform_device.h> +#include <linux/smsc911x.h> + +#include <asm/mach-au1x00/au1000.h> +#include <asm/mach-au1x00/au1100_mmc.h> +#include <asm/mach-au1x00/au1200fb.h> +#include <asm/mach-au1x00/au1xxx_dbdma.h> +#include <asm/mach-au1x00/au1xxx_psc.h> +#include <asm/mach-db1x00/db1300.h> +#include <asm/mach-db1x00/bcsr.h> +#include <asm/mach-au1x00/prom.h> + +#include "platform.h" + +static struct i2c_board_info db1300_i2c_devs[] __initdata = { + { I2C_BOARD_INFO("wm8731", 0x1b), }, /* I2S audio codec */ + { I2C_BOARD_INFO("ne1619", 0x2d), }, /* adm1025-compat hwmon */ +}; + +/* multifunction pins to assign to GPIO controller */ +static int db1300_gpio_pins[] __initdata = { + AU1300_PIN_LCDPWM0, AU1300_PIN_PSC2SYNC1, AU1300_PIN_WAKE1, + AU1300_PIN_WAKE2, AU1300_PIN_WAKE3, AU1300_PIN_FG3AUX, + AU1300_PIN_EXTCLK1, + -1, /* terminator */ +}; + +/* multifunction pins to assign to device functions */ +static int db1300_dev_pins[] __initdata = { + /* wake-from-str pins 0-3 */ + AU1300_PIN_WAKE0, + /* external clock sources for PSC0 */ + AU1300_PIN_EXTCLK0, + /* 8bit MMC interface on SD0: 6-9 */ + AU1300_PIN_SD0DAT4, AU1300_PIN_SD0DAT5, AU1300_PIN_SD0DAT6, + AU1300_PIN_SD0DAT7, + /* UART1 pins: 11-18 */ + AU1300_PIN_U1RI, AU1300_PIN_U1DCD, AU1300_PIN_U1DSR, + AU1300_PIN_U1CTS, AU1300_PIN_U1RTS, AU1300_PIN_U1DTR, + AU1300_PIN_U1RX, AU1300_PIN_U1TX, + /* UART0 pins: 19-24 */ + AU1300_PIN_U0RI, AU1300_PIN_U0DCD, AU1300_PIN_U0DSR, + AU1300_PIN_U0CTS, AU1300_PIN_U0RTS, AU1300_PIN_U0DTR, + /* UART2: 25-26 */ + AU1300_PIN_U2RX, AU1300_PIN_U2TX, + /* UART3: 27-28 */ + AU1300_PIN_U3RX, AU1300_PIN_U3TX, + /* LCD controller PWMs, ext pixclock: 30-31 */ + AU1300_PIN_LCDPWM1, AU1300_PIN_LCDCLKIN, + /* SD1 interface: 32-37 */ + AU1300_PIN_SD1DAT0, AU1300_PIN_SD1DAT1, AU1300_PIN_SD1DAT2, + AU1300_PIN_SD1DAT3, AU1300_PIN_SD1CMD, AU1300_PIN_SD1CLK, + /* SD2 interface: 38-43 */ + AU1300_PIN_SD2DAT0, AU1300_PIN_SD2DAT1, AU1300_PIN_SD2DAT2, + AU1300_PIN_SD2DAT3, AU1300_PIN_SD2CMD, AU1300_PIN_SD2CLK, + /* PSC0/1 clocks: 44-45 */ + AU1300_PIN_PSC0CLK, AU1300_PIN_PSC1CLK, + /* PSCs: 46-49/50-53/54-57/58-61 */ + AU1300_PIN_PSC0SYNC0, AU1300_PIN_PSC0SYNC1, AU1300_PIN_PSC0D0, + AU1300_PIN_PSC0D1, + AU1300_PIN_PSC1SYNC0, AU1300_PIN_PSC1SYNC1, AU1300_PIN_PSC1D0, + AU1300_PIN_PSC1D1, + AU1300_PIN_PSC2SYNC0, AU1300_PIN_PSC2D0, + AU1300_PIN_PSC2D1, + AU1300_PIN_PSC3SYNC0, AU1300_PIN_PSC3SYNC1, AU1300_PIN_PSC3D0, + AU1300_PIN_PSC3D1, + /* PCMCIA interface: 62-70 */ + AU1300_PIN_PCE2, AU1300_PIN_PCE1, AU1300_PIN_PIOS16, + AU1300_PIN_PIOR, AU1300_PIN_PWE, AU1300_PIN_PWAIT, + AU1300_PIN_PREG, AU1300_PIN_POE, AU1300_PIN_PIOW, + /* camera interface H/V sync inputs: 71-72 */ + AU1300_PIN_CIMLS, AU1300_PIN_CIMFS, + /* PSC2/3 clocks: 73-74 */ + AU1300_PIN_PSC2CLK, AU1300_PIN_PSC3CLK, + -1, /* terminator */ +}; + +static void __init db1300_gpio_config(void) +{ + int *i; + + i = &db1300_dev_pins[0]; + while (*i != -1) + au1300_pinfunc_to_dev(*i++); + + i = &db1300_gpio_pins[0]; + while (*i != -1) + au1300_gpio_direction_input(*i++);/* implies pin_to_gpio */ + + au1300_set_dbdma_gpio(1, AU1300_PIN_FG3AUX); +} + +char *get_system_type(void) +{ + return "DB1300"; +} + +/**********************************************************************/ + +static void au1300_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, + unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + unsigned long ioaddr = (unsigned long)this->IO_ADDR_W; + + ioaddr &= 0xffffff00; + + if (ctrl & NAND_CLE) { + ioaddr += MEM_STNAND_CMD; + } else if (ctrl & NAND_ALE) { + ioaddr += MEM_STNAND_ADDR; + } else { + /* assume we want to r/w real data by default */ + ioaddr += MEM_STNAND_DATA; + } + this->IO_ADDR_R = this->IO_ADDR_W = (void __iomem *)ioaddr; + if (cmd != NAND_CMD_NONE) { + __raw_writeb(cmd, this->IO_ADDR_W); + wmb(); + } +} + +static int au1300_nand_device_ready(struct mtd_info *mtd) +{ + return __raw_readl((void __iomem *)MEM_STSTAT) & 1; +} + +static const char *db1300_part_probes[] = { "cmdlinepart", NULL }; + +static struct mtd_partition db1300_nand_parts[] = { + { + .name = "NAND FS 0", + .offset = 0, + .size = 8 * 1024 * 1024, + }, + { + .name = "NAND FS 1", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL + }, +}; + +struct platform_nand_data db1300_nand_platdata = { + .chip = { + .nr_chips = 1, + .chip_offset = 0, + .nr_partitions = ARRAY_SIZE(db1300_nand_parts), + .partitions = db1300_nand_parts, + .chip_delay = 20, + .part_probe_types = db1300_part_probes, + }, + .ctrl = { + .dev_ready = au1300_nand_device_ready, + .cmd_ctrl = au1300_nand_cmd_ctrl, + }, +}; + +static struct resource db1300_nand_res[] = { + [0] = { + .start = DB1300_NAND_PHYS_ADDR, + .end = DB1300_NAND_PHYS_ADDR + 0xff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device db1300_nand_dev = { + .name = "gen_nand", + .num_resources = ARRAY_SIZE(db1300_nand_res), + .resource = db1300_nand_res, + .id = -1, + .dev = { + .platform_data = &db1300_nand_platdata, + } +}; + +/**********************************************************************/ + +static struct resource db1300_eth_res[] = { + [0] = { + .start = DB1300_ETH_PHYS_ADDR, + .end = DB1300_ETH_PHYS_END, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DB1300_ETH_INT, + .end = DB1300_ETH_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct smsc911x_platform_config db1300_eth_config = { + .phy_interface = PHY_INTERFACE_MODE_MII, + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, + .flags = SMSC911X_USE_32BIT, +}; + +static struct platform_device db1300_eth_dev = { + .name = "smsc911x", + .id = -1, + .num_resources = ARRAY_SIZE(db1300_eth_res), + .resource = db1300_eth_res, + .dev = { + .platform_data = &db1300_eth_config, + }, +}; + +/**********************************************************************/ + +static struct resource au1300_psc1_res[] = { + [0] = { + .start = AU1300_PSC1_PHYS_ADDR, + .end = AU1300_PSC1_PHYS_ADDR + 0x0fff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1300_PSC1_INT, + .end = AU1300_PSC1_INT, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = AU1300_DSCR_CMD0_PSC1_TX, + .end = AU1300_DSCR_CMD0_PSC1_TX, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = AU1300_DSCR_CMD0_PSC1_RX, + .end = AU1300_DSCR_CMD0_PSC1_RX, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device db1300_ac97_dev = { + .name = "au1xpsc_ac97", + .id = 1, /* PSC ID. match with AC97 codec ID! */ + .num_resources = ARRAY_SIZE(au1300_psc1_res), + .resource = au1300_psc1_res, +}; + +/**********************************************************************/ + +static struct resource au1300_psc2_res[] = { + [0] = { + .start = AU1300_PSC2_PHYS_ADDR, + .end = AU1300_PSC2_PHYS_ADDR + 0x0fff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1300_PSC2_INT, + .end = AU1300_PSC2_INT, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = AU1300_DSCR_CMD0_PSC2_TX, + .end = AU1300_DSCR_CMD0_PSC2_TX, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = AU1300_DSCR_CMD0_PSC2_RX, + .end = AU1300_DSCR_CMD0_PSC2_RX, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device db1300_i2s_dev = { + .name = "au1xpsc_i2s", + .id = 2, /* PSC ID */ + .num_resources = ARRAY_SIZE(au1300_psc2_res), + .resource = au1300_psc2_res, +}; + +/**********************************************************************/ + +static struct resource au1300_psc3_res[] = { + [0] = { + .start = AU1300_PSC3_PHYS_ADDR, + .end = AU1300_PSC3_PHYS_ADDR + 0x0fff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1300_PSC3_INT, + .end = AU1300_PSC3_INT, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = AU1300_DSCR_CMD0_PSC3_TX, + .end = AU1300_DSCR_CMD0_PSC3_TX, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = AU1300_DSCR_CMD0_PSC3_RX, + .end = AU1300_DSCR_CMD0_PSC3_RX, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device db1300_i2c_dev = { + .name = "au1xpsc_smbus", + .id = 0, /* bus number */ + .num_resources = ARRAY_SIZE(au1300_psc3_res), + .resource = au1300_psc3_res, +}; + +/**********************************************************************/ + +/* proper key assignments when facing the LCD panel. For key assignments + * according to the schematics swap up with down and left with right. + * I chose to use it to emulate the arrow keys of a keyboard. + */ +static struct gpio_keys_button db1300_5waysw_arrowkeys[] = { + { + .code = KEY_DOWN, + .gpio = AU1300_PIN_LCDPWM0, + .type = EV_KEY, + .debounce_interval = 1, + .active_low = 1, + .desc = "5waysw-down", + }, + { + .code = KEY_UP, + .gpio = AU1300_PIN_PSC2SYNC1, + .type = EV_KEY, + .debounce_interval = 1, + .active_low = 1, + .desc = "5waysw-up", + }, + { + .code = KEY_RIGHT, + .gpio = AU1300_PIN_WAKE3, + .type = EV_KEY, + .debounce_interval = 1, + .active_low = 1, + .desc = "5waysw-right", + }, + { + .code = KEY_LEFT, + .gpio = AU1300_PIN_WAKE2, + .type = EV_KEY, + .debounce_interval = 1, + .active_low = 1, + .desc = "5waysw-left", + }, + { + .code = KEY_ENTER, + .gpio = AU1300_PIN_WAKE1, + .type = EV_KEY, + .debounce_interval = 1, + .active_low = 1, + .desc = "5waysw-push", + }, +}; + +static struct gpio_keys_platform_data db1300_5waysw_data = { + .buttons = db1300_5waysw_arrowkeys, + .nbuttons = ARRAY_SIZE(db1300_5waysw_arrowkeys), + .rep = 1, + .name = "db1300-5wayswitch", +}; + +static struct platform_device db1300_5waysw_dev = { + .name = "gpio-keys", + .dev = { + .platform_data = &db1300_5waysw_data, + }, +}; + +/**********************************************************************/ + +static struct pata_platform_info db1300_ide_info = { + .ioport_shift = DB1300_IDE_REG_SHIFT, +}; + +#define IDE_ALT_START (14 << DB1300_IDE_REG_SHIFT) +static struct resource db1300_ide_res[] = { + [0] = { + .start = DB1300_IDE_PHYS_ADDR, + .end = DB1300_IDE_PHYS_ADDR + IDE_ALT_START - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DB1300_IDE_PHYS_ADDR + IDE_ALT_START, + .end = DB1300_IDE_PHYS_ADDR + DB1300_IDE_PHYS_LEN - 1, + .flags = IORESOURCE_MEM, + }, + [2] = { + .start = DB1300_IDE_INT, + .end = DB1300_IDE_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device db1300_ide_dev = { + .dev = { + .platform_data = &db1300_ide_info, + }, + .name = "pata_platform", + .resource = db1300_ide_res, + .num_resources = ARRAY_SIZE(db1300_ide_res), +}; + +/**********************************************************************/ + +static irqreturn_t db1300_mmc_cd(int irq, void *ptr) +{ + void(*mmc_cd)(struct mmc_host *, unsigned long); + + /* disable the one currently screaming. No other way to shut it up */ + if (irq == DB1300_SD1_INSERT_INT) { + disable_irq_nosync(DB1300_SD1_INSERT_INT); + enable_irq(DB1300_SD1_EJECT_INT); + } else { + disable_irq_nosync(DB1300_SD1_EJECT_INT); + enable_irq(DB1300_SD1_INSERT_INT); + } + + /* link against CONFIG_MMC=m. We can only be called once MMC core has + * initialized the controller, so symbol_get() should always succeed. + */ + mmc_cd = symbol_get(mmc_detect_change); + mmc_cd(ptr, msecs_to_jiffies(500)); + symbol_put(mmc_detect_change); + + return IRQ_HANDLED; +} + +static int db1300_mmc_card_readonly(void *mmc_host) +{ + /* it uses SD1 interface, but the DB1200's SD0 bit in the CPLD */ + return bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD0WP; +} + +static int db1300_mmc_card_inserted(void *mmc_host) +{ + return bcsr_read(BCSR_SIGSTAT) & (1 << 12); /* insertion irq signal */ +} + +static int db1300_mmc_cd_setup(void *mmc_host, int en) +{ + int ret; + + if (en) { + ret = request_irq(DB1300_SD1_INSERT_INT, db1300_mmc_cd, 0, + "sd_insert", mmc_host); + if (ret) + goto out; + + ret = request_irq(DB1300_SD1_EJECT_INT, db1300_mmc_cd, 0, + "sd_eject", mmc_host); + if (ret) { + free_irq(DB1300_SD1_INSERT_INT, mmc_host); + goto out; + } + + if (db1300_mmc_card_inserted(mmc_host)) + enable_irq(DB1300_SD1_EJECT_INT); + else + enable_irq(DB1300_SD1_INSERT_INT); + + } else { + free_irq(DB1300_SD1_INSERT_INT, mmc_host); + free_irq(DB1300_SD1_EJECT_INT, mmc_host); + } + ret = 0; +out: + return ret; +} + +static void db1300_mmcled_set(struct led_classdev *led, + enum led_brightness brightness) +{ + if (brightness != LED_OFF) + bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED0, 0); + else + bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED0); +} + +static struct led_classdev db1300_mmc_led = { + .brightness_set = db1300_mmcled_set, +}; + +struct au1xmmc_platform_data db1300_sd1_platdata = { + .cd_setup = db1300_mmc_cd_setup, + .card_inserted = db1300_mmc_card_inserted, + .card_readonly = db1300_mmc_card_readonly, + .led = &db1300_mmc_led, +}; + +static struct resource au1300_sd1_res[] = { + [0] = { + .start = AU1300_SD1_PHYS_ADDR, + .end = AU1300_SD1_PHYS_ADDR, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1300_SD1_INT, + .end = AU1300_SD1_INT, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = AU1300_DSCR_CMD0_SDMS_TX1, + .end = AU1300_DSCR_CMD0_SDMS_TX1, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = AU1300_DSCR_CMD0_SDMS_RX1, + .end = AU1300_DSCR_CMD0_SDMS_RX1, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device db1300_sd1_dev = { + .dev = { + .platform_data = &db1300_sd1_platdata, + }, + .name = "au1xxx-mmc", + .id = 1, + .resource = au1300_sd1_res, + .num_resources = ARRAY_SIZE(au1300_sd1_res), +}; + +/**********************************************************************/ + +static int db1300_movinand_inserted(void *mmc_host) +{ + return 0; /* disable for now, it doesn't work yet */ +} + +static int db1300_movinand_readonly(void *mmc_host) +{ + return 0; +} + +static void db1300_movinand_led_set(struct led_classdev *led, + enum led_brightness brightness) +{ + if (brightness != LED_OFF) + bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED1, 0); + else + bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED1); +} + +static struct led_classdev db1300_movinand_led = { + .brightness_set = db1300_movinand_led_set, +}; + +struct au1xmmc_platform_data db1300_sd0_platdata = { + .card_inserted = db1300_movinand_inserted, + .card_readonly = db1300_movinand_readonly, + .led = &db1300_movinand_led, + .mask_host_caps = MMC_CAP_NEEDS_POLL, +}; + +static struct resource au1300_sd0_res[] = { + [0] = { + .start = AU1100_SD0_PHYS_ADDR, + .end = AU1100_SD0_PHYS_ADDR, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1300_SD0_INT, + .end = AU1300_SD0_INT, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = AU1300_DSCR_CMD0_SDMS_TX0, + .end = AU1300_DSCR_CMD0_SDMS_TX0, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = AU1300_DSCR_CMD0_SDMS_RX0, + .end = AU1300_DSCR_CMD0_SDMS_RX0, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device db1300_sd0_dev = { + .dev = { + .platform_data = &db1300_sd0_platdata, + }, + .name = "au1xxx-mmc", + .id = 0, + .resource = au1300_sd0_res, + .num_resources = ARRAY_SIZE(au1300_sd0_res), +}; + +/**********************************************************************/ + +static struct platform_device db1300_wm9715_dev = { + .name = "wm9712-codec", + .id = 1, /* ID of PSC for AC97 audio, see asoc glue! */ +}; + +static struct platform_device db1300_ac97dma_dev = { + .name = "au1xpsc-pcm", + .id = 1, /* PSC ID */ +}; + +static struct platform_device db1300_i2sdma_dev = { + .name = "au1xpsc-pcm", + .id = 2, /* PSC ID */ +}; + +static struct platform_device db1300_sndac97_dev = { + .name = "db1300-ac97", +}; + +static struct platform_device db1300_sndi2s_dev = { + .name = "db1300-i2s", +}; + +/**********************************************************************/ + +static int db1300fb_panel_index(void) +{ + return 9; /* DB1300_800x480 */ +} + +static int db1300fb_panel_init(void) +{ + /* Apply power (Vee/Vdd logic is inverted on Panel DB1300_800x480) */ + bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD, + BCSR_BOARD_LCDBL); + return 0; +} + +static int db1300fb_panel_shutdown(void) +{ + /* Remove power (Vee/Vdd logic is inverted on Panel DB1300_800x480) */ + bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDBL, + BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD); + return 0; +} + +static struct au1200fb_platdata db1300fb_pd = { + .panel_index = db1300fb_panel_index, + .panel_init = db1300fb_panel_init, + .panel_shutdown = db1300fb_panel_shutdown, +}; + +static struct resource au1300_lcd_res[] = { + [0] = { + .start = AU1200_LCD_PHYS_ADDR, + .end = AU1200_LCD_PHYS_ADDR + 0x800 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1300_LCD_INT, + .end = AU1300_LCD_INT, + .flags = IORESOURCE_IRQ, + } +}; + +static u64 au1300_lcd_dmamask = DMA_BIT_MASK(32); + +static struct platform_device db1300_lcd_dev = { + .name = "au1200-lcd", + .id = 0, + .dev = { + .dma_mask = &au1300_lcd_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &db1300fb_pd, + }, + .num_resources = ARRAY_SIZE(au1300_lcd_res), + .resource = au1300_lcd_res, +}; + +/**********************************************************************/ + +static struct platform_device *db1300_dev[] __initdata = { + &db1300_eth_dev, + &db1300_i2c_dev, + &db1300_5waysw_dev, + &db1300_nand_dev, + &db1300_ide_dev, + &db1300_sd0_dev, + &db1300_sd1_dev, + &db1300_lcd_dev, + &db1300_ac97_dev, + &db1300_i2s_dev, + &db1300_wm9715_dev, + &db1300_ac97dma_dev, + &db1300_i2sdma_dev, + &db1300_sndac97_dev, + &db1300_sndi2s_dev, +}; + +static int __init db1300_device_init(void) +{ + int swapped, cpldirq; + + /* setup CPLD IRQ muxer */ + cpldirq = au1300_gpio_to_irq(AU1300_PIN_EXTCLK1); + irq_set_irq_type(cpldirq, IRQ_TYPE_LEVEL_HIGH); + bcsr_init_irq(DB1300_FIRST_INT, DB1300_LAST_INT, cpldirq); + + /* insert/eject IRQs: one always triggers so don't enable them + * when doing request_irq() on them. DB1200 has this bug too. + */ + irq_set_status_flags(DB1300_SD1_INSERT_INT, IRQ_NOAUTOEN); + irq_set_status_flags(DB1300_SD1_EJECT_INT, IRQ_NOAUTOEN); + irq_set_status_flags(DB1300_CF_INSERT_INT, IRQ_NOAUTOEN); + irq_set_status_flags(DB1300_CF_EJECT_INT, IRQ_NOAUTOEN); + + /* + * setup board + */ + prom_get_ethernet_addr(&db1300_eth_config.mac[0]); + + i2c_register_board_info(0, db1300_i2c_devs, + ARRAY_SIZE(db1300_i2c_devs)); + + /* Audio PSC clock is supplied by codecs (PSC1, 2) */ + __raw_writel(PSC_SEL_CLK_SERCLK, + (void __iomem *)KSEG1ADDR(AU1300_PSC1_PHYS_ADDR) + PSC_SEL_OFFSET); + wmb(); + __raw_writel(PSC_SEL_CLK_SERCLK, + (void __iomem *)KSEG1ADDR(AU1300_PSC2_PHYS_ADDR) + PSC_SEL_OFFSET); + wmb(); + /* I2C uses internal 48MHz EXTCLK1 */ + __raw_writel(PSC_SEL_CLK_INTCLK, + (void __iomem *)KSEG1ADDR(AU1300_PSC3_PHYS_ADDR) + PSC_SEL_OFFSET); + wmb(); + + /* enable power to USB ports */ + bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_USBHPWR | BCSR_RESETS_OTGPWR); + + /* although it is socket #0, it uses the CPLD bits which previous boards + * have used for socket #1. + */ + db1x_register_pcmcia_socket( + AU1000_PCMCIA_ATTR_PHYS_ADDR, + AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x00400000 - 1, + AU1000_PCMCIA_MEM_PHYS_ADDR, + AU1000_PCMCIA_MEM_PHYS_ADDR + 0x00400000 - 1, + AU1000_PCMCIA_IO_PHYS_ADDR, + AU1000_PCMCIA_IO_PHYS_ADDR + 0x00010000 - 1, + DB1300_CF_INT, DB1300_CF_INSERT_INT, 0, DB1300_CF_EJECT_INT, 1); + + swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1200_SWAPBOOT; + db1x_register_norflash(64 << 20, 2, swapped); + + return platform_add_devices(db1300_dev, ARRAY_SIZE(db1300_dev)); +} +device_initcall(db1300_device_init); + + +void __init board_setup(void) +{ + unsigned short whoami; + + db1300_gpio_config(); + bcsr_init(DB1300_BCSR_PHYS_ADDR, + DB1300_BCSR_PHYS_ADDR + DB1300_BCSR_HEXLED_OFS); + + whoami = bcsr_read(BCSR_WHOAMI); + printk(KERN_INFO "NetLogic DBAu1300 Development Platform.\n\t" + "BoardID %d CPLD Rev %d DaughtercardID %d\n", + BCSR_WHOAMI_BOARD(whoami), BCSR_WHOAMI_CPLD(whoami), + BCSR_WHOAMI_DCID(whoami)); + + /* enable UARTs, YAMON only enables #2 */ + alchemy_uart_enable(AU1300_UART0_PHYS_ADDR); + alchemy_uart_enable(AU1300_UART1_PHYS_ADDR); + alchemy_uart_enable(AU1300_UART3_PHYS_ADDR); +} diff --git a/arch/mips/alchemy/devboards/db1550.c b/arch/mips/alchemy/devboards/db1550.c new file mode 100644 index 00000000000..6815d0783cd --- /dev/null +++ b/arch/mips/alchemy/devboards/db1550.c @@ -0,0 +1,498 @@ +/* + * Alchemy Db1550 board support + * + * (c) 2011 Manuel Lauss <manuel.lauss@googlemail.com> + */ + +#include <linux/dma-mapping.h> +#include <linux/gpio.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/interrupt.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/partitions.h> +#include <linux/platform_device.h> +#include <linux/pm.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> +#include <asm/mach-au1x00/au1000.h> +#include <asm/mach-au1x00/au1xxx_eth.h> +#include <asm/mach-au1x00/au1xxx_dbdma.h> +#include <asm/mach-au1x00/au1xxx_psc.h> +#include <asm/mach-au1x00/au1550_spi.h> +#include <asm/mach-db1x00/bcsr.h> +#include <prom.h> +#include "platform.h" + + +const char *get_system_type(void) +{ + return "DB1550"; +} + +static void __init db1550_hw_setup(void) +{ + void __iomem *base; + + alchemy_gpio_direction_output(203, 0); /* red led on */ + + /* complete SPI setup: link psc0_intclk to a 48MHz source, + * and assign GPIO16 to PSC0_SYNC1 (SPI cs# line) + */ + base = (void __iomem *)SYS_CLKSRC; + __raw_writel(__raw_readl(base) | 0x000001e0, base); + base = (void __iomem *)SYS_PINFUNC; + __raw_writel(__raw_readl(base) | 1, base); + wmb(); + + /* reset the AC97 codec now, the reset time in the psc-ac97 driver + * is apparently too short although it's ridiculous as it is. + */ + base = (void __iomem *)KSEG1ADDR(AU1550_PSC1_PHYS_ADDR); + __raw_writel(PSC_SEL_CLK_SERCLK | PSC_SEL_PS_AC97MODE, + base + PSC_SEL_OFFSET); + __raw_writel(PSC_CTRL_DISABLE, base + PSC_CTRL_OFFSET); + wmb(); + __raw_writel(PSC_AC97RST_RST, base + PSC_AC97RST_OFFSET); + wmb(); + + alchemy_gpio_direction_output(202, 0); /* green led on */ +} + +void __init board_setup(void) +{ + unsigned short whoami; + + bcsr_init(DB1550_BCSR_PHYS_ADDR, + DB1550_BCSR_PHYS_ADDR + DB1550_BCSR_HEXLED_OFS); + + whoami = bcsr_read(BCSR_WHOAMI); + printk(KERN_INFO "Alchemy/AMD DB1550 Board, CPLD Rev %d" + " Board-ID %d Daughtercard ID %d\n", + (whoami >> 4) & 0xf, (whoami >> 8) & 0xf, whoami & 0xf); + + db1550_hw_setup(); +} + +/*****************************************************************************/ + +static struct mtd_partition db1550_spiflash_parts[] = { + { + .name = "spi_flash", + .offset = 0, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct flash_platform_data db1550_spiflash_data = { + .name = "s25fl010", + .parts = db1550_spiflash_parts, + .nr_parts = ARRAY_SIZE(db1550_spiflash_parts), + .type = "m25p10", +}; + +static struct spi_board_info db1550_spi_devs[] __initdata = { + { + /* TI TMP121AIDBVR temp sensor */ + .modalias = "tmp121", + .max_speed_hz = 2400000, + .bus_num = 0, + .chip_select = 0, + .mode = SPI_MODE_0, + }, + { + /* Spansion S25FL001D0FMA SPI flash */ + .modalias = "m25p80", + .max_speed_hz = 2400000, + .bus_num = 0, + .chip_select = 1, + .mode = SPI_MODE_0, + .platform_data = &db1550_spiflash_data, + }, +}; + +static struct i2c_board_info db1550_i2c_devs[] __initdata = { + { I2C_BOARD_INFO("24c04", 0x52),}, /* AT24C04-10 I2C eeprom */ + { I2C_BOARD_INFO("ne1619", 0x2d),}, /* adm1025-compat hwmon */ + { I2C_BOARD_INFO("wm8731", 0x1b),}, /* I2S audio codec WM8731 */ +}; + +/**********************************************************************/ + +static void au1550_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, + unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + unsigned long ioaddr = (unsigned long)this->IO_ADDR_W; + + ioaddr &= 0xffffff00; + + if (ctrl & NAND_CLE) { + ioaddr += MEM_STNAND_CMD; + } else if (ctrl & NAND_ALE) { + ioaddr += MEM_STNAND_ADDR; + } else { + /* assume we want to r/w real data by default */ + ioaddr += MEM_STNAND_DATA; + } + this->IO_ADDR_R = this->IO_ADDR_W = (void __iomem *)ioaddr; + if (cmd != NAND_CMD_NONE) { + __raw_writeb(cmd, this->IO_ADDR_W); + wmb(); + } +} + +static int au1550_nand_device_ready(struct mtd_info *mtd) +{ + return __raw_readl((void __iomem *)MEM_STSTAT) & 1; +} + +static const char *db1550_part_probes[] = { "cmdlinepart", NULL }; + +static struct mtd_partition db1550_nand_parts[] = { + { + .name = "NAND FS 0", + .offset = 0, + .size = 8 * 1024 * 1024, + }, + { + .name = "NAND FS 1", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL + }, +}; + +struct platform_nand_data db1550_nand_platdata = { + .chip = { + .nr_chips = 1, + .chip_offset = 0, + .nr_partitions = ARRAY_SIZE(db1550_nand_parts), + .partitions = db1550_nand_parts, + .chip_delay = 20, + .part_probe_types = db1550_part_probes, + }, + .ctrl = { + .dev_ready = au1550_nand_device_ready, + .cmd_ctrl = au1550_nand_cmd_ctrl, + }, +}; + +static struct resource db1550_nand_res[] = { + [0] = { + .start = 0x20000000, + .end = 0x200000ff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device db1550_nand_dev = { + .name = "gen_nand", + .num_resources = ARRAY_SIZE(db1550_nand_res), + .resource = db1550_nand_res, + .id = -1, + .dev = { + .platform_data = &db1550_nand_platdata, + } +}; + +/**********************************************************************/ + +static struct resource au1550_psc0_res[] = { + [0] = { + .start = AU1550_PSC0_PHYS_ADDR, + .end = AU1550_PSC0_PHYS_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1550_PSC0_INT, + .end = AU1550_PSC0_INT, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = AU1550_DSCR_CMD0_PSC0_TX, + .end = AU1550_DSCR_CMD0_PSC0_TX, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = AU1550_DSCR_CMD0_PSC0_RX, + .end = AU1550_DSCR_CMD0_PSC0_RX, + .flags = IORESOURCE_DMA, + }, +}; + +static void db1550_spi_cs_en(struct au1550_spi_info *spi, int cs, int pol) +{ + if (cs) + bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SPISEL); + else + bcsr_mod(BCSR_BOARD, BCSR_BOARD_SPISEL, 0); +} + +static struct au1550_spi_info db1550_spi_platdata = { + .mainclk_hz = 48000000, /* PSC0 clock: max. 2.4MHz SPI clk */ + .num_chipselect = 2, + .activate_cs = db1550_spi_cs_en, +}; + +static u64 spi_dmamask = DMA_BIT_MASK(32); + +static struct platform_device db1550_spi_dev = { + .dev = { + .dma_mask = &spi_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &db1550_spi_platdata, + }, + .name = "au1550-spi", + .id = 0, /* bus number */ + .num_resources = ARRAY_SIZE(au1550_psc0_res), + .resource = au1550_psc0_res, +}; + +/**********************************************************************/ + +static struct resource au1550_psc1_res[] = { + [0] = { + .start = AU1550_PSC1_PHYS_ADDR, + .end = AU1550_PSC1_PHYS_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1550_PSC1_INT, + .end = AU1550_PSC1_INT, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = AU1550_DSCR_CMD0_PSC1_TX, + .end = AU1550_DSCR_CMD0_PSC1_TX, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = AU1550_DSCR_CMD0_PSC1_RX, + .end = AU1550_DSCR_CMD0_PSC1_RX, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device db1550_ac97_dev = { + .name = "au1xpsc_ac97", + .id = 1, /* PSC ID */ + .num_resources = ARRAY_SIZE(au1550_psc1_res), + .resource = au1550_psc1_res, +}; + + +static struct resource au1550_psc2_res[] = { + [0] = { + .start = AU1550_PSC2_PHYS_ADDR, + .end = AU1550_PSC2_PHYS_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1550_PSC2_INT, + .end = AU1550_PSC2_INT, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = AU1550_DSCR_CMD0_PSC2_TX, + .end = AU1550_DSCR_CMD0_PSC2_TX, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = AU1550_DSCR_CMD0_PSC2_RX, + .end = AU1550_DSCR_CMD0_PSC2_RX, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device db1550_i2c_dev = { + .name = "au1xpsc_smbus", + .id = 0, /* bus number */ + .num_resources = ARRAY_SIZE(au1550_psc2_res), + .resource = au1550_psc2_res, +}; + +/**********************************************************************/ + +static struct resource au1550_psc3_res[] = { + [0] = { + .start = AU1550_PSC3_PHYS_ADDR, + .end = AU1550_PSC3_PHYS_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1550_PSC3_INT, + .end = AU1550_PSC3_INT, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = AU1550_DSCR_CMD0_PSC3_TX, + .end = AU1550_DSCR_CMD0_PSC3_TX, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = AU1550_DSCR_CMD0_PSC3_RX, + .end = AU1550_DSCR_CMD0_PSC3_RX, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device db1550_i2s_dev = { + .name = "au1xpsc_i2s", + .id = 3, /* PSC ID */ + .num_resources = ARRAY_SIZE(au1550_psc3_res), + .resource = au1550_psc3_res, +}; + +/**********************************************************************/ + +static struct platform_device db1550_stac_dev = { + .name = "ac97-codec", + .id = 1, /* on PSC1 */ +}; + +static struct platform_device db1550_ac97dma_dev = { + .name = "au1xpsc-pcm", + .id = 1, /* on PSC3 */ +}; + +static struct platform_device db1550_i2sdma_dev = { + .name = "au1xpsc-pcm", + .id = 3, /* on PSC3 */ +}; + +static struct platform_device db1550_sndac97_dev = { + .name = "db1550-ac97", +}; + +static struct platform_device db1550_sndi2s_dev = { + .name = "db1550-i2s", +}; + +/**********************************************************************/ + +static int db1550_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin) +{ + if ((slot < 11) || (slot > 13) || pin == 0) + return -1; + if (slot == 11) + return (pin == 1) ? AU1550_PCI_INTC : 0xff; + if (slot == 12) { + switch (pin) { + case 1: return AU1550_PCI_INTB; + case 2: return AU1550_PCI_INTC; + case 3: return AU1550_PCI_INTD; + case 4: return AU1550_PCI_INTA; + } + } + if (slot == 13) { + switch (pin) { + case 1: return AU1550_PCI_INTA; + case 2: return AU1550_PCI_INTB; + case 3: return AU1550_PCI_INTC; + case 4: return AU1550_PCI_INTD; + } + } + return -1; +} + +static struct resource alchemy_pci_host_res[] = { + [0] = { + .start = AU1500_PCI_PHYS_ADDR, + .end = AU1500_PCI_PHYS_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct alchemy_pci_platdata db1550_pci_pd = { + .board_map_irq = db1550_map_pci_irq, +}; + +static struct platform_device db1550_pci_host_dev = { + .dev.platform_data = &db1550_pci_pd, + .name = "alchemy-pci", + .id = 0, + .num_resources = ARRAY_SIZE(alchemy_pci_host_res), + .resource = alchemy_pci_host_res, +}; + +/**********************************************************************/ + +static struct platform_device *db1550_devs[] __initdata = { + &db1550_nand_dev, + &db1550_i2c_dev, + &db1550_ac97_dev, + &db1550_spi_dev, + &db1550_i2s_dev, + &db1550_stac_dev, + &db1550_ac97dma_dev, + &db1550_i2sdma_dev, + &db1550_sndac97_dev, + &db1550_sndi2s_dev, +}; + +/* must be arch_initcall; MIPS PCI scans busses in a subsys_initcall */ +static int __init db1550_pci_init(void) +{ + return platform_device_register(&db1550_pci_host_dev); +} +arch_initcall(db1550_pci_init); + +static int __init db1550_dev_init(void) +{ + int swapped; + + irq_set_irq_type(AU1550_GPIO0_INT, IRQ_TYPE_EDGE_BOTH); /* CD0# */ + irq_set_irq_type(AU1550_GPIO1_INT, IRQ_TYPE_EDGE_BOTH); /* CD1# */ + irq_set_irq_type(AU1550_GPIO3_INT, IRQ_TYPE_LEVEL_LOW); /* CARD0# */ + irq_set_irq_type(AU1550_GPIO5_INT, IRQ_TYPE_LEVEL_LOW); /* CARD1# */ + irq_set_irq_type(AU1550_GPIO21_INT, IRQ_TYPE_LEVEL_LOW); /* STSCHG0# */ + irq_set_irq_type(AU1550_GPIO22_INT, IRQ_TYPE_LEVEL_LOW); /* STSCHG1# */ + + i2c_register_board_info(0, db1550_i2c_devs, + ARRAY_SIZE(db1550_i2c_devs)); + spi_register_board_info(db1550_spi_devs, + ARRAY_SIZE(db1550_i2c_devs)); + + /* Audio PSC clock is supplied by codecs (PSC1, 3) FIXME: platdata!! */ + __raw_writel(PSC_SEL_CLK_SERCLK, + (void __iomem *)KSEG1ADDR(AU1550_PSC1_PHYS_ADDR) + PSC_SEL_OFFSET); + wmb(); + __raw_writel(PSC_SEL_CLK_SERCLK, + (void __iomem *)KSEG1ADDR(AU1550_PSC3_PHYS_ADDR) + PSC_SEL_OFFSET); + wmb(); + /* SPI/I2C use internally supplied 50MHz source */ + __raw_writel(PSC_SEL_CLK_INTCLK, + (void __iomem *)KSEG1ADDR(AU1550_PSC0_PHYS_ADDR) + PSC_SEL_OFFSET); + wmb(); + __raw_writel(PSC_SEL_CLK_INTCLK, + (void __iomem *)KSEG1ADDR(AU1550_PSC2_PHYS_ADDR) + PSC_SEL_OFFSET); + wmb(); + + db1x_register_pcmcia_socket( + AU1000_PCMCIA_ATTR_PHYS_ADDR, + AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, + AU1000_PCMCIA_MEM_PHYS_ADDR, + AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, + AU1000_PCMCIA_IO_PHYS_ADDR, + AU1000_PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1, + AU1550_GPIO3_INT, AU1550_GPIO0_INT, + /*AU1550_GPIO21_INT*/0, 0, 0); + + db1x_register_pcmcia_socket( + AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004000000, + AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004400000 - 1, + AU1000_PCMCIA_MEM_PHYS_ADDR + 0x004000000, + AU1000_PCMCIA_MEM_PHYS_ADDR + 0x004400000 - 1, + AU1000_PCMCIA_IO_PHYS_ADDR + 0x004000000, + AU1000_PCMCIA_IO_PHYS_ADDR + 0x004010000 - 1, + AU1550_GPIO5_INT, AU1550_GPIO1_INT, + /*AU1550_GPIO22_INT*/0, 0, 1); + + swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1000_SWAPBOOT; + db1x_register_norflash(128 << 20, 4, swapped); + + return platform_add_devices(db1550_devs, ARRAY_SIZE(db1550_devs)); +} +device_initcall(db1550_dev_init); diff --git a/arch/mips/alchemy/devboards/db1x00/Makefile b/arch/mips/alchemy/devboards/db1x00/Makefile deleted file mode 100644 index 613c0c0c8be..00000000000 --- a/arch/mips/alchemy/devboards/db1x00/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Copyright 2000, 2008 MontaVista Software Inc. -# Author: MontaVista Software, Inc. <source@mvista.com> -# -# Makefile for the Alchemy Semiconductor DBAu1xx0 boards. -# - -obj-y := board_setup.o platform.o diff --git a/arch/mips/alchemy/devboards/db1x00/board_setup.c b/arch/mips/alchemy/devboards/db1x00/board_setup.c deleted file mode 100644 index 7cd36e631f6..00000000000 --- a/arch/mips/alchemy/devboards/db1x00/board_setup.c +++ /dev/null @@ -1,229 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * Alchemy Db1x00 board setup. - * - * Copyright 2000, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. <source@mvista.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/pm.h> - -#include <asm/mach-au1x00/au1000.h> -#include <asm/mach-au1x00/au1xxx_eth.h> -#include <asm/mach-db1x00/db1x00.h> -#include <asm/mach-db1x00/bcsr.h> -#include <asm/reboot.h> - -#include <prom.h> - -#ifdef CONFIG_MIPS_BOSPORUS -char irq_tab_alchemy[][5] __initdata = { - [11] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 11 - miniPCI */ - [12] = { -1, AU1500_PCI_INTA, 0xff, 0xff, 0xff }, /* IDSEL 12 - SN1741 */ - [13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, AU1500_PCI_INTC, AU1500_PCI_INTD }, /* IDSEL 13 - PCI slot */ -}; - -/* - * Micrel/Kendin 5 port switch attached to MAC0, - * MAC0 is associated with PHY address 5 (== WAN port) - * MAC1 is not associated with any PHY, since it's connected directly - * to the switch. - * no interrupts are used - */ -static struct au1000_eth_platform_data eth0_pdata = { - .phy_static_config = 1, - .phy_addr = 5, -}; - -static void bosporus_power_off(void) -{ - while (1) - asm volatile (".set mips3 ; wait ; .set mips0"); -} - -const char *get_system_type(void) -{ - return "Alchemy Bosporus Gateway Reference"; -} -#endif - - -#ifdef CONFIG_MIPS_MIRAGE -static void mirage_power_off(void) -{ - alchemy_gpio_direction_output(210, 1); -} - -const char *get_system_type(void) -{ - return "Alchemy Mirage"; -} -#endif - - -#if defined(CONFIG_MIPS_BOSPORUS) || defined(CONFIG_MIPS_MIRAGE) -static void mips_softreset(void) -{ - asm volatile ("jr\t%0" : : "r"(0xbfc00000)); -} - -#else - -const char *get_system_type(void) -{ - return "Alchemy Db1x00"; -} -#endif - - -void __init board_setup(void) -{ - unsigned long bcsr1, bcsr2; - - bcsr1 = DB1000_BCSR_PHYS_ADDR; - bcsr2 = DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS; - -#ifdef CONFIG_MIPS_DB1000 - printk(KERN_INFO "AMD Alchemy Au1000/Db1000 Board\n"); -#endif -#ifdef CONFIG_MIPS_DB1500 - printk(KERN_INFO "AMD Alchemy Au1500/Db1500 Board\n"); -#endif -#ifdef CONFIG_MIPS_DB1100 - printk(KERN_INFO "AMD Alchemy Au1100/Db1100 Board\n"); -#endif -#ifdef CONFIG_MIPS_BOSPORUS - au1xxx_override_eth_cfg(0, ð0_pdata); - - printk(KERN_INFO "AMD Alchemy Bosporus Board\n"); -#endif -#ifdef CONFIG_MIPS_MIRAGE - printk(KERN_INFO "AMD Alchemy Mirage Board\n"); -#endif -#ifdef CONFIG_MIPS_DB1550 - printk(KERN_INFO "AMD Alchemy Au1550/Db1550 Board\n"); - - bcsr1 = DB1550_BCSR_PHYS_ADDR; - bcsr2 = DB1550_BCSR_PHYS_ADDR + DB1550_BCSR_HEXLED_OFS; -#endif - - /* initialize board register space */ - bcsr_init(bcsr1, bcsr2); - -#if defined(CONFIG_IRDA) && defined(CONFIG_AU1000_FIR) - { - u32 pin_func; - - /* Set IRFIRSEL instead of GPIO15 */ - pin_func = au_readl(SYS_PINFUNC) | SYS_PF_IRF; - au_writel(pin_func, SYS_PINFUNC); - /* Power off until the driver is in use */ - bcsr_mod(BCSR_RESETS, BCSR_RESETS_IRDA_MODE_MASK, - BCSR_RESETS_IRDA_MODE_OFF); - } -#endif - bcsr_write(BCSR_PCMCIA, 0); /* turn off PCMCIA power */ - - /* Enable GPIO[31:0] inputs */ - alchemy_gpio1_input_enable(); - -#ifdef CONFIG_MIPS_MIRAGE - { - u32 pin_func; - - /* GPIO[20] is output */ - alchemy_gpio_direction_output(20, 0); - - /* Set GPIO[210:208] instead of SSI_0 */ - pin_func = au_readl(SYS_PINFUNC) | SYS_PF_S0; - - /* Set GPIO[215:211] for LEDs */ - pin_func |= 5 << 2; - - /* Set GPIO[214:213] for more LEDs */ - pin_func |= 5 << 12; - - /* Set GPIO[207:200] instead of PCMCIA/LCD */ - pin_func |= SYS_PF_LCD | SYS_PF_PC; - au_writel(pin_func, SYS_PINFUNC); - - /* - * Enable speaker amplifier. This should - * be part of the audio driver. - */ - alchemy_gpio_direction_output(209, 1); - - pm_power_off = mirage_power_off; - _machine_halt = mirage_power_off; - _machine_restart = (void(*)(char *))mips_softreset; - } -#endif - -#ifdef CONFIG_MIPS_BOSPORUS - pm_power_off = bosporus_power_off; - _machine_halt = bosporus_power_off; - _machine_restart = (void(*)(char *))mips_softreset; -#endif - au_sync(); -} - -static int __init db1x00_init_irq(void) -{ -#if defined(CONFIG_MIPS_MIRAGE) - irq_set_irq_type(AU1500_GPIO7_INT, IRQF_TRIGGER_RISING); /* TS pendown */ -#elif defined(CONFIG_MIPS_DB1550) - irq_set_irq_type(AU1550_GPIO0_INT, IRQF_TRIGGER_LOW); /* CD0# */ - irq_set_irq_type(AU1550_GPIO1_INT, IRQF_TRIGGER_LOW); /* CD1# */ - irq_set_irq_type(AU1550_GPIO3_INT, IRQF_TRIGGER_LOW); /* CARD0# */ - irq_set_irq_type(AU1550_GPIO5_INT, IRQF_TRIGGER_LOW); /* CARD1# */ - irq_set_irq_type(AU1550_GPIO21_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */ - irq_set_irq_type(AU1550_GPIO22_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */ -#elif defined(CONFIG_MIPS_DB1500) - irq_set_irq_type(AU1500_GPIO0_INT, IRQF_TRIGGER_LOW); /* CD0# */ - irq_set_irq_type(AU1500_GPIO3_INT, IRQF_TRIGGER_LOW); /* CD1# */ - irq_set_irq_type(AU1500_GPIO2_INT, IRQF_TRIGGER_LOW); /* CARD0# */ - irq_set_irq_type(AU1500_GPIO5_INT, IRQF_TRIGGER_LOW); /* CARD1# */ - irq_set_irq_type(AU1500_GPIO1_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */ - irq_set_irq_type(AU1500_GPIO4_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */ -#elif defined(CONFIG_MIPS_DB1100) - irq_set_irq_type(AU1100_GPIO0_INT, IRQF_TRIGGER_LOW); /* CD0# */ - irq_set_irq_type(AU1100_GPIO3_INT, IRQF_TRIGGER_LOW); /* CD1# */ - irq_set_irq_type(AU1100_GPIO2_INT, IRQF_TRIGGER_LOW); /* CARD0# */ - irq_set_irq_type(AU1100_GPIO5_INT, IRQF_TRIGGER_LOW); /* CARD1# */ - irq_set_irq_type(AU1100_GPIO1_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */ - irq_set_irq_type(AU1100_GPIO4_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */ -#elif defined(CONFIG_MIPS_DB1000) - irq_set_irq_type(AU1000_GPIO0_INT, IRQF_TRIGGER_LOW); /* CD0# */ - irq_set_irq_type(AU1000_GPIO3_INT, IRQF_TRIGGER_LOW); /* CD1# */ - irq_set_irq_type(AU1000_GPIO2_INT, IRQF_TRIGGER_LOW); /* CARD0# */ - irq_set_irq_type(AU1000_GPIO5_INT, IRQF_TRIGGER_LOW); /* CARD1# */ - irq_set_irq_type(AU1000_GPIO1_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */ - irq_set_irq_type(AU1000_GPIO4_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */ -#endif - return 0; -} -arch_initcall(db1x00_init_irq); diff --git a/arch/mips/alchemy/devboards/db1x00/platform.c b/arch/mips/alchemy/devboards/db1x00/platform.c deleted file mode 100644 index 9e6b3d442ac..00000000000 --- a/arch/mips/alchemy/devboards/db1x00/platform.c +++ /dev/null @@ -1,316 +0,0 @@ -/* - * DBAu1xxx board platform device registration - * - * Copyright (C) 2009 Manuel Lauss - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/dma-mapping.h> -#include <linux/platform_device.h> - -#include <asm/mach-au1x00/au1000.h> -#include <asm/mach-au1x00/au1000_dma.h> -#include <asm/mach-db1x00/bcsr.h> -#include "../platform.h" - -struct pci_dev; - -/* DB1xxx PCMCIA interrupt sources: - * CD0/1 GPIO0/3 - * STSCHG0/1 GPIO1/4 - * CARD0/1 GPIO2/5 - * Db1550: 0/1, 21/22, 3/5 - */ - -#define DB1XXX_HAS_PCMCIA -#define F_SWAPPED (bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1000_SWAPBOOT) - -#if defined(CONFIG_MIPS_DB1000) -#define DB1XXX_PCMCIA_CD0 AU1000_GPIO0_INT -#define DB1XXX_PCMCIA_STSCHG0 AU1000_GPIO1_INT -#define DB1XXX_PCMCIA_CARD0 AU1000_GPIO2_INT -#define DB1XXX_PCMCIA_CD1 AU1000_GPIO3_INT -#define DB1XXX_PCMCIA_STSCHG1 AU1000_GPIO4_INT -#define DB1XXX_PCMCIA_CARD1 AU1000_GPIO5_INT -#define BOARD_FLASH_SIZE 0x02000000 /* 32MB */ -#define BOARD_FLASH_WIDTH 4 /* 32-bits */ -#elif defined(CONFIG_MIPS_DB1100) -#define DB1XXX_PCMCIA_CD0 AU1100_GPIO0_INT -#define DB1XXX_PCMCIA_STSCHG0 AU1100_GPIO1_INT -#define DB1XXX_PCMCIA_CARD0 AU1100_GPIO2_INT -#define DB1XXX_PCMCIA_CD1 AU1100_GPIO3_INT -#define DB1XXX_PCMCIA_STSCHG1 AU1100_GPIO4_INT -#define DB1XXX_PCMCIA_CARD1 AU1100_GPIO5_INT -#define BOARD_FLASH_SIZE 0x02000000 /* 32MB */ -#define BOARD_FLASH_WIDTH 4 /* 32-bits */ -#elif defined(CONFIG_MIPS_DB1500) -#define DB1XXX_PCMCIA_CD0 AU1500_GPIO0_INT -#define DB1XXX_PCMCIA_STSCHG0 AU1500_GPIO1_INT -#define DB1XXX_PCMCIA_CARD0 AU1500_GPIO2_INT -#define DB1XXX_PCMCIA_CD1 AU1500_GPIO3_INT -#define DB1XXX_PCMCIA_STSCHG1 AU1500_GPIO4_INT -#define DB1XXX_PCMCIA_CARD1 AU1500_GPIO5_INT -#define BOARD_FLASH_SIZE 0x02000000 /* 32MB */ -#define BOARD_FLASH_WIDTH 4 /* 32-bits */ -#elif defined(CONFIG_MIPS_DB1550) -#define DB1XXX_PCMCIA_CD0 AU1550_GPIO0_INT -#define DB1XXX_PCMCIA_STSCHG0 AU1550_GPIO21_INT -#define DB1XXX_PCMCIA_CARD0 AU1550_GPIO3_INT -#define DB1XXX_PCMCIA_CD1 AU1550_GPIO1_INT -#define DB1XXX_PCMCIA_STSCHG1 AU1550_GPIO22_INT -#define DB1XXX_PCMCIA_CARD1 AU1550_GPIO5_INT -#define BOARD_FLASH_SIZE 0x08000000 /* 128MB */ -#define BOARD_FLASH_WIDTH 4 /* 32-bits */ -#else -/* other board: no PCMCIA */ -#undef DB1XXX_HAS_PCMCIA -#undef F_SWAPPED -#define F_SWAPPED 0 -#if defined(CONFIG_MIPS_BOSPORUS) -#define BOARD_FLASH_SIZE 0x01000000 /* 16MB */ -#define BOARD_FLASH_WIDTH 2 /* 16-bits */ -#elif defined(CONFIG_MIPS_MIRAGE) -#define BOARD_FLASH_SIZE 0x04000000 /* 64MB */ -#define BOARD_FLASH_WIDTH 4 /* 32-bits */ -#endif -#endif - -#ifdef CONFIG_PCI -#ifdef CONFIG_MIPS_DB1500 -static int db1xxx_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin) -{ - if ((slot < 12) || (slot > 13) || pin == 0) - return -1; - if (slot == 12) - return (pin == 1) ? AU1500_PCI_INTA : 0xff; - if (slot == 13) { - switch (pin) { - case 1: return AU1500_PCI_INTA; - case 2: return AU1500_PCI_INTB; - case 3: return AU1500_PCI_INTC; - case 4: return AU1500_PCI_INTD; - } - } - return -1; -} -#endif - -#ifdef CONFIG_MIPS_DB1550 -static int db1xxx_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin) -{ - if ((slot < 11) || (slot > 13) || pin == 0) - return -1; - if (slot == 11) - return (pin == 1) ? AU1550_PCI_INTC : 0xff; - if (slot == 12) { - switch (pin) { - case 1: return AU1550_PCI_INTB; - case 2: return AU1550_PCI_INTC; - case 3: return AU1550_PCI_INTD; - case 4: return AU1550_PCI_INTA; - } - } - if (slot == 13) { - switch (pin) { - case 1: return AU1550_PCI_INTA; - case 2: return AU1550_PCI_INTB; - case 3: return AU1550_PCI_INTC; - case 4: return AU1550_PCI_INTD; - } - } - return -1; -} -#endif - -#ifdef CONFIG_MIPS_BOSPORUS -static int db1xxx_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin) -{ - if ((slot < 11) || (slot > 13) || pin == 0) - return -1; - if (slot == 12) - return (pin == 1) ? AU1500_PCI_INTA : 0xff; - if (slot == 11) { - switch (pin) { - case 1: return AU1500_PCI_INTA; - case 2: return AU1500_PCI_INTB; - default: return 0xff; - } - } - if (slot == 13) { - switch (pin) { - case 1: return AU1500_PCI_INTA; - case 2: return AU1500_PCI_INTB; - case 3: return AU1500_PCI_INTC; - case 4: return AU1500_PCI_INTD; - } - } - return -1; -} -#endif - -#ifdef CONFIG_MIPS_MIRAGE -static int db1xxx_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin) -{ - if ((slot < 11) || (slot > 13) || pin == 0) - return -1; - if (slot == 11) - return (pin == 1) ? AU1500_PCI_INTD : 0xff; - if (slot == 12) - return (pin == 3) ? AU1500_PCI_INTC : 0xff; - if (slot == 13) { - switch (pin) { - case 1: return AU1500_PCI_INTA; - case 2: return AU1500_PCI_INTB; - default: return 0xff; - } - } - return -1; -} -#endif - -static struct resource alchemy_pci_host_res[] = { - [0] = { - .start = AU1500_PCI_PHYS_ADDR, - .end = AU1500_PCI_PHYS_ADDR + 0xfff, - .flags = IORESOURCE_MEM, - }, -}; - -static struct alchemy_pci_platdata db1xxx_pci_pd = { - .board_map_irq = db1xxx_map_pci_irq, -}; - -static struct platform_device db1xxx_pci_host_dev = { - .dev.platform_data = &db1xxx_pci_pd, - .name = "alchemy-pci", - .id = 0, - .num_resources = ARRAY_SIZE(alchemy_pci_host_res), - .resource = alchemy_pci_host_res, -}; - -static int __init db15x0_pci_init(void) -{ - return platform_device_register(&db1xxx_pci_host_dev); -} -/* must be arch_initcall; MIPS PCI scans busses in a subsys_initcall */ -arch_initcall(db15x0_pci_init); -#endif - -#ifdef CONFIG_MIPS_DB1100 -static struct resource au1100_lcd_resources[] = { - [0] = { - .start = AU1100_LCD_PHYS_ADDR, - .end = AU1100_LCD_PHYS_ADDR + 0x800 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AU1100_LCD_INT, - .end = AU1100_LCD_INT, - .flags = IORESOURCE_IRQ, - } -}; - -static u64 au1100_lcd_dmamask = DMA_BIT_MASK(32); - -static struct platform_device au1100_lcd_device = { - .name = "au1100-lcd", - .id = 0, - .dev = { - .dma_mask = &au1100_lcd_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .num_resources = ARRAY_SIZE(au1100_lcd_resources), - .resource = au1100_lcd_resources, -}; -#endif - -static struct resource alchemy_ac97c_res[] = { - [0] = { - .start = AU1000_AC97_PHYS_ADDR, - .end = AU1000_AC97_PHYS_ADDR + 0xfff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMA_ID_AC97C_TX, - .end = DMA_ID_AC97C_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMA_ID_AC97C_RX, - .end = DMA_ID_AC97C_RX, - .flags = IORESOURCE_DMA, - }, -}; - -static struct platform_device alchemy_ac97c_dev = { - .name = "alchemy-ac97c", - .id = -1, - .resource = alchemy_ac97c_res, - .num_resources = ARRAY_SIZE(alchemy_ac97c_res), -}; - -static struct platform_device alchemy_ac97c_dma_dev = { - .name = "alchemy-pcm-dma", - .id = 0, -}; - -static struct platform_device db1x00_codec_dev = { - .name = "ac97-codec", - .id = -1, -}; - -static struct platform_device db1x00_audio_dev = { - .name = "db1000-audio", -}; - -static int __init db1xxx_dev_init(void) -{ -#ifdef DB1XXX_HAS_PCMCIA - db1x_register_pcmcia_socket( - AU1000_PCMCIA_ATTR_PHYS_ADDR, - AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, - AU1000_PCMCIA_MEM_PHYS_ADDR, - AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, - AU1000_PCMCIA_IO_PHYS_ADDR, - AU1000_PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1, - DB1XXX_PCMCIA_CARD0, DB1XXX_PCMCIA_CD0, - /*DB1XXX_PCMCIA_STSCHG0*/0, 0, 0); - - db1x_register_pcmcia_socket( - AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004000000, - AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004400000 - 1, - AU1000_PCMCIA_MEM_PHYS_ADDR + 0x004000000, - AU1000_PCMCIA_MEM_PHYS_ADDR + 0x004400000 - 1, - AU1000_PCMCIA_IO_PHYS_ADDR + 0x004000000, - AU1000_PCMCIA_IO_PHYS_ADDR + 0x004010000 - 1, - DB1XXX_PCMCIA_CARD1, DB1XXX_PCMCIA_CD1, - /*DB1XXX_PCMCIA_STSCHG1*/0, 0, 1); -#endif -#ifdef CONFIG_MIPS_DB1100 - platform_device_register(&au1100_lcd_device); -#endif - db1x_register_norflash(BOARD_FLASH_SIZE, BOARD_FLASH_WIDTH, F_SWAPPED); - - platform_device_register(&db1x00_codec_dev); - platform_device_register(&alchemy_ac97c_dma_dev); - platform_device_register(&alchemy_ac97c_dev); - platform_device_register(&db1x00_audio_dev); - - return 0; -} -device_initcall(db1xxx_dev_init); diff --git a/arch/mips/alchemy/devboards/pb1000/Makefile b/arch/mips/alchemy/devboards/pb1000/Makefile deleted file mode 100644 index 97c6615ba2b..00000000000 --- a/arch/mips/alchemy/devboards/pb1000/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Copyright 2000, 2008 MontaVista Software Inc. -# Author: MontaVista Software, Inc. <source@mvista.com> -# -# Makefile for the Alchemy Semiconductor Pb1000 board. -# - -obj-y := board_setup.o diff --git a/arch/mips/alchemy/devboards/pb1000/board_setup.c b/arch/mips/alchemy/devboards/pb1000/board_setup.c deleted file mode 100644 index e64fdcbf75d..00000000000 --- a/arch/mips/alchemy/devboards/pb1000/board_setup.c +++ /dev/null @@ -1,209 +0,0 @@ -/* - * Copyright 2000, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. <source@mvista.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/delay.h> -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/pm.h> -#include <asm/mach-au1x00/au1000.h> -#include <asm/mach-pb1x00/pb1000.h> -#include <asm/reboot.h> -#include <prom.h> - -#include "../platform.h" - -const char *get_system_type(void) -{ - return "Alchemy Pb1000"; -} - -static void board_reset(char *c) -{ - asm volatile ("jr %0" : : "r" (0xbfc00000)); -} - -static void board_power_off(void) -{ - while (1) - asm volatile ( - " .set mips32 \n" - " wait \n" - " .set mips0 \n"); -} - -void __init board_setup(void) -{ - u32 pin_func, static_cfg0; - u32 sys_freqctrl, sys_clksrc; - u32 prid = read_c0_prid(); - - sys_freqctrl = 0; - sys_clksrc = 0; - - /* Set AUX clock to 12 MHz * 8 = 96 MHz */ - au_writel(8, SYS_AUXPLL); - alchemy_gpio1_input_enable(); - udelay(100); - -#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) - /* Zero and disable FREQ2 */ - sys_freqctrl = au_readl(SYS_FREQCTRL0); - sys_freqctrl &= ~0xFFF00000; - au_writel(sys_freqctrl, SYS_FREQCTRL0); - - /* Zero and disable USBH/USBD clocks */ - sys_clksrc = au_readl(SYS_CLKSRC); - sys_clksrc &= ~(SYS_CS_CUD | SYS_CS_DUD | SYS_CS_MUD_MASK | - SYS_CS_CUH | SYS_CS_DUH | SYS_CS_MUH_MASK); - au_writel(sys_clksrc, SYS_CLKSRC); - - sys_freqctrl = au_readl(SYS_FREQCTRL0); - sys_freqctrl &= ~0xFFF00000; - - sys_clksrc = au_readl(SYS_CLKSRC); - sys_clksrc &= ~(SYS_CS_CUD | SYS_CS_DUD | SYS_CS_MUD_MASK | - SYS_CS_CUH | SYS_CS_DUH | SYS_CS_MUH_MASK); - - switch (prid & 0x000000FF) { - case 0x00: /* DA */ - case 0x01: /* HA */ - case 0x02: /* HB */ - /* CPU core freq to 48 MHz to slow it way down... */ - au_writel(4, SYS_CPUPLL); - - /* - * Setup 48 MHz FREQ2 from CPUPLL for USB Host - * FRDIV2 = 3 -> div by 8 of 384 MHz -> 48 MHz - */ - sys_freqctrl |= (3 << SYS_FC_FRDIV2_BIT) | SYS_FC_FE2; - au_writel(sys_freqctrl, SYS_FREQCTRL0); - - /* CPU core freq to 384 MHz */ - au_writel(0x20, SYS_CPUPLL); - - printk(KERN_INFO "Au1000: 48 MHz OHCI workaround enabled\n"); - break; - - default: /* HC and newer */ - /* FREQ2 = aux / 2 = 48 MHz */ - sys_freqctrl |= (0 << SYS_FC_FRDIV2_BIT) | - SYS_FC_FE2 | SYS_FC_FS2; - au_writel(sys_freqctrl, SYS_FREQCTRL0); - break; - } - - /* - * Route 48 MHz FREQ2 into USB Host and/or Device - */ - sys_clksrc |= SYS_CS_MUX_FQ2 << SYS_CS_MUH_BIT; - au_writel(sys_clksrc, SYS_CLKSRC); - - /* Configure pins GPIO[14:9] as GPIO */ - pin_func = au_readl(SYS_PINFUNC) & ~(SYS_PF_UR3 | SYS_PF_USB); - - /* 2nd USB port is USB host */ - pin_func |= SYS_PF_USB; - - au_writel(pin_func, SYS_PINFUNC); - - alchemy_gpio_direction_input(11); - alchemy_gpio_direction_input(13); - alchemy_gpio_direction_output(4, 0); - alchemy_gpio_direction_output(5, 0); -#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */ - - /* Make GPIO 15 an input (for interrupt line) */ - pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_IRF; - /* We don't need I2S, so make it available for GPIO[31:29] */ - pin_func |= SYS_PF_I2S; - au_writel(pin_func, SYS_PINFUNC); - - alchemy_gpio_direction_input(15); - - static_cfg0 = au_readl(MEM_STCFG0) & ~0xc00; - au_writel(static_cfg0, MEM_STCFG0); - - /* configure RCE2* for LCD */ - au_writel(0x00000004, MEM_STCFG2); - - /* MEM_STTIME2 */ - au_writel(0x09000000, MEM_STTIME2); - - /* Set 32-bit base address decoding for RCE2* */ - au_writel(0x10003ff0, MEM_STADDR2); - - /* - * PCI CPLD setup - * Expand CE0 to cover PCI - */ - au_writel(0x11803e40, MEM_STADDR1); - - /* Burst visibility on */ - au_writel(au_readl(MEM_STCFG0) | 0x1000, MEM_STCFG0); - - au_writel(0x83, MEM_STCFG1); /* ewait enabled, flash timing */ - au_writel(0x33030a10, MEM_STTIME1); /* slower timing for FPGA */ - - /* Setup the static bus controller */ - au_writel(0x00000002, MEM_STCFG3); /* type = PCMCIA */ - au_writel(0x280E3D07, MEM_STTIME3); /* 250ns cycle time */ - au_writel(0x10000000, MEM_STADDR3); /* any PCMCIA select */ - - /* - * Enable Au1000 BCLK switching - note: sed1356 must not use - * its BCLK (Au1000 LCLK) for any timings - */ - switch (prid & 0x000000FF) { - case 0x00: /* DA */ - case 0x01: /* HA */ - case 0x02: /* HB */ - break; - default: /* HC and newer */ - /* - * Enable sys bus clock divider when IDLE state or no bus - * activity. - */ - au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL); - break; - } - - pm_power_off = board_power_off; - _machine_halt = board_power_off; - _machine_restart = board_reset; -} - -static int __init pb1000_init_irq(void) -{ - irq_set_irq_type(AU1000_GPIO15_INT, IRQF_TRIGGER_LOW); - return 0; -} -arch_initcall(pb1000_init_irq); - -static int __init pb1000_device_init(void) -{ - return db1x_register_norflash(8 * 1024 * 1024, 4, 0); -} -device_initcall(pb1000_device_init); diff --git a/arch/mips/alchemy/devboards/pb1100/board_setup.c b/arch/mips/alchemy/devboards/pb1100.c index d108fd573aa..cff50d05ddd 100644 --- a/arch/mips/alchemy/devboards/pb1100/board_setup.c +++ b/arch/mips/alchemy/devboards/pb1100.c @@ -1,42 +1,37 @@ /* - * Copyright 2002, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. <source@mvista.com> + * Pb1100 board platform device registration * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. + * Copyright (C) 2009 Manuel Lauss * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#include <linux/delay.h> #include <linux/gpio.h> #include <linux/init.h> -#include <linux/delay.h> #include <linux/interrupt.h> - +#include <linux/dma-mapping.h> +#include <linux/platform_device.h> #include <asm/mach-au1x00/au1000.h> #include <asm/mach-db1x00/bcsr.h> - #include <prom.h> - +#include "platform.h" const char *get_system_type(void) { - return "Alchemy Pb1100"; + return "PB1100"; } void __init board_setup(void) @@ -115,13 +110,58 @@ void __init board_setup(void) } } -static int __init pb1100_init_irq(void) +/******************************************************************************/ + +static struct resource au1100_lcd_resources[] = { + [0] = { + .start = AU1100_LCD_PHYS_ADDR, + .end = AU1100_LCD_PHYS_ADDR + 0x800 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1100_LCD_INT, + .end = AU1100_LCD_INT, + .flags = IORESOURCE_IRQ, + } +}; + +static u64 au1100_lcd_dmamask = DMA_BIT_MASK(32); + +static struct platform_device au1100_lcd_device = { + .name = "au1100-lcd", + .id = 0, + .dev = { + .dma_mask = &au1100_lcd_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = ARRAY_SIZE(au1100_lcd_resources), + .resource = au1100_lcd_resources, +}; + +static int __init pb1100_dev_init(void) { + int swapped; + irq_set_irq_type(AU1100_GPIO9_INT, IRQF_TRIGGER_LOW); /* PCCD# */ irq_set_irq_type(AU1100_GPIO10_INT, IRQF_TRIGGER_LOW); /* PCSTSCHG# */ irq_set_irq_type(AU1100_GPIO11_INT, IRQF_TRIGGER_LOW); /* PCCard# */ irq_set_irq_type(AU1100_GPIO13_INT, IRQF_TRIGGER_LOW); /* DC_IRQ# */ + /* PCMCIA. single socket, identical to Pb1500 */ + db1x_register_pcmcia_socket( + AU1000_PCMCIA_ATTR_PHYS_ADDR, + AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, + AU1000_PCMCIA_MEM_PHYS_ADDR, + AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, + AU1000_PCMCIA_IO_PHYS_ADDR, + AU1000_PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1, + AU1100_GPIO11_INT, AU1100_GPIO9_INT, /* card / insert */ + /*AU1100_GPIO10_INT*/0, 0, 0); /* stschg / eject / id */ + + swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1000_SWAPBOOT; + db1x_register_norflash(64 * 1024 * 1024, 4, swapped); + platform_device_register(&au1100_lcd_device); + return 0; } -arch_initcall(pb1100_init_irq); +device_initcall(pb1100_dev_init); diff --git a/arch/mips/alchemy/devboards/pb1100/Makefile b/arch/mips/alchemy/devboards/pb1100/Makefile deleted file mode 100644 index 7e3756c83fe..00000000000 --- a/arch/mips/alchemy/devboards/pb1100/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Copyright 2000, 2001, 2008 MontaVista Software Inc. -# Author: MontaVista Software, Inc. <source@mvista.com> -# -# Makefile for the Alchemy Semiconductor Pb1100 board. -# - -obj-y := board_setup.o platform.o diff --git a/arch/mips/alchemy/devboards/pb1100/platform.c b/arch/mips/alchemy/devboards/pb1100/platform.c deleted file mode 100644 index 9c57c01a68c..00000000000 --- a/arch/mips/alchemy/devboards/pb1100/platform.c +++ /dev/null @@ -1,77 +0,0 @@ -/* - * Pb1100 board platform device registration - * - * Copyright (C) 2009 Manuel Lauss - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <linux/init.h> -#include <linux/dma-mapping.h> -#include <linux/platform_device.h> - -#include <asm/mach-au1x00/au1000.h> -#include <asm/mach-db1x00/bcsr.h> - -#include "../platform.h" - -static struct resource au1100_lcd_resources[] = { - [0] = { - .start = AU1100_LCD_PHYS_ADDR, - .end = AU1100_LCD_PHYS_ADDR + 0x800 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AU1100_LCD_INT, - .end = AU1100_LCD_INT, - .flags = IORESOURCE_IRQ, - } -}; - -static u64 au1100_lcd_dmamask = DMA_BIT_MASK(32); - -static struct platform_device au1100_lcd_device = { - .name = "au1100-lcd", - .id = 0, - .dev = { - .dma_mask = &au1100_lcd_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .num_resources = ARRAY_SIZE(au1100_lcd_resources), - .resource = au1100_lcd_resources, -}; - -static int __init pb1100_dev_init(void) -{ - int swapped; - - /* PCMCIA. single socket, identical to Pb1500 */ - db1x_register_pcmcia_socket( - AU1000_PCMCIA_ATTR_PHYS_ADDR, - AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, - AU1000_PCMCIA_MEM_PHYS_ADDR, - AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, - AU1000_PCMCIA_IO_PHYS_ADDR, - AU1000_PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1, - AU1100_GPIO11_INT, AU1100_GPIO9_INT, /* card / insert */ - /*AU1100_GPIO10_INT*/0, 0, 0); /* stschg / eject / id */ - - swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1000_SWAPBOOT; - db1x_register_norflash(64 * 1024 * 1024, 4, swapped); - platform_device_register(&au1100_lcd_device); - - return 0; -} -device_initcall(pb1100_dev_init); diff --git a/arch/mips/alchemy/devboards/pb1200/Makefile b/arch/mips/alchemy/devboards/pb1200/Makefile deleted file mode 100644 index 18c1bd53e4c..00000000000 --- a/arch/mips/alchemy/devboards/pb1200/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# -# Makefile for the Alchemy Semiconductor Pb1200/DBAu1200 boards. -# - -obj-y := board_setup.o platform.o diff --git a/arch/mips/alchemy/devboards/pb1200/board_setup.c b/arch/mips/alchemy/devboards/pb1200/board_setup.c deleted file mode 100644 index 6d06b07c238..00000000000 --- a/arch/mips/alchemy/devboards/pb1200/board_setup.c +++ /dev/null @@ -1,174 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * Alchemy Pb1200/Db1200 board setup. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/sched.h> - -#include <asm/mach-au1x00/au1000.h> -#include <asm/mach-db1x00/bcsr.h> - -#ifdef CONFIG_MIPS_PB1200 -#include <asm/mach-pb1x00/pb1200.h> -#endif - -#ifdef CONFIG_MIPS_DB1200 -#include <asm/mach-db1x00/db1200.h> -#define PB1200_INT_BEGIN DB1200_INT_BEGIN -#define PB1200_INT_END DB1200_INT_END -#endif - -#include <prom.h> - -const char *get_system_type(void) -{ - return "Alchemy Pb1200"; -} - -void __init board_setup(void) -{ - printk(KERN_INFO "AMD Alchemy Pb1200 Board\n"); - bcsr_init(PB1200_BCSR_PHYS_ADDR, - PB1200_BCSR_PHYS_ADDR + PB1200_BCSR_HEXLED_OFS); - -#if 0 - { - u32 pin_func; - - /* - * Enable PSC1 SYNC for AC97. Normaly done in audio driver, - * but it is board specific code, so put it here. - */ - pin_func = au_readl(SYS_PINFUNC); - au_sync(); - pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1; - au_writel(pin_func, SYS_PINFUNC); - - au_writel(0, (u32)bcsr | 0x10); /* turn off PCMCIA power */ - au_sync(); - } -#endif - -#if defined(CONFIG_I2C_AU1550) - { - u32 freq0, clksrc; - u32 pin_func; - - /* Select SMBus in CPLD */ - bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC0MUX, 0); - - pin_func = au_readl(SYS_PINFUNC); - au_sync(); - pin_func &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B); - /* Set GPIOs correctly */ - pin_func |= 2 << 17; - au_writel(pin_func, SYS_PINFUNC); - au_sync(); - - /* The I2C driver depends on 50 MHz clock */ - freq0 = au_readl(SYS_FREQCTRL0); - au_sync(); - freq0 &= ~(SYS_FC_FRDIV1_MASK | SYS_FC_FS1 | SYS_FC_FE1); - freq0 |= 3 << SYS_FC_FRDIV1_BIT; - /* 396 MHz / (3 + 1) * 2 == 49.5 MHz */ - au_writel(freq0, SYS_FREQCTRL0); - au_sync(); - freq0 |= SYS_FC_FE1; - au_writel(freq0, SYS_FREQCTRL0); - au_sync(); - - clksrc = au_readl(SYS_CLKSRC); - au_sync(); - clksrc &= ~(SYS_CS_CE0 | SYS_CS_DE0 | SYS_CS_ME0_MASK); - /* Bit 22 is EXTCLK0 for PSC0 */ - clksrc |= SYS_CS_MUX_FQ1 << SYS_CS_ME0_BIT; - au_writel(clksrc, SYS_CLKSRC); - au_sync(); - } -#endif - - /* - * The Pb1200 development board uses external MUX for PSC0 to - * support SMB/SPI. bcsr_resets bit 12: 0=SMB 1=SPI - */ -#ifdef CONFIG_I2C_AU1550 - bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC0MUX, 0); -#endif - au_sync(); -} - -static int __init pb1200_init_irq(void) -{ - /* We have a problem with CPLD rev 3. */ - if (BCSR_WHOAMI_CPLD(bcsr_read(BCSR_WHOAMI)) <= 3) { - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "Pb1200 must be at CPLD rev 4. Please have Pb1200\n"); - printk(KERN_ERR "updated to latest revision. This software will\n"); - printk(KERN_ERR "not work on anything less than CPLD rev 4.\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - panic("Game over. Your score is 0."); - } - - irq_set_irq_type(AU1200_GPIO7_INT, IRQF_TRIGGER_LOW); - bcsr_init_irq(PB1200_INT_BEGIN, PB1200_INT_END, AU1200_GPIO7_INT); - - return 0; -} -arch_initcall(pb1200_init_irq); - - -int board_au1200fb_panel(void) -{ - return (bcsr_read(BCSR_SWITCHES) >> 8) & 0x0f; -} - -int board_au1200fb_panel_init(void) -{ - /* Apply power */ - bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | - BCSR_BOARD_LCDBL); - /* printk(KERN_DEBUG "board_au1200fb_panel_init()\n"); */ - return 0; -} - -int board_au1200fb_panel_shutdown(void) -{ - /* Remove power */ - bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | - BCSR_BOARD_LCDBL, 0); - /* printk(KERN_DEBUG "board_au1200fb_panel_shutdown()\n"); */ - return 0; -} diff --git a/arch/mips/alchemy/devboards/pb1200/platform.c b/arch/mips/alchemy/devboards/pb1200/platform.c deleted file mode 100644 index 54f7f7b0676..00000000000 --- a/arch/mips/alchemy/devboards/pb1200/platform.c +++ /dev/null @@ -1,339 +0,0 @@ -/* - * Pb1200/DBAu1200 board platform device registration - * - * Copyright (C) 2008 MontaVista Software Inc. <source@mvista.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <linux/dma-mapping.h> -#include <linux/init.h> -#include <linux/leds.h> -#include <linux/platform_device.h> -#include <linux/smc91x.h> - -#include <asm/mach-au1x00/au1000.h> -#include <asm/mach-au1x00/au1100_mmc.h> -#include <asm/mach-au1x00/au1xxx_dbdma.h> -#include <asm/mach-db1x00/bcsr.h> -#include <asm/mach-pb1x00/pb1200.h> - -#include "../platform.h" - -static int mmc_activity; - -static void pb1200mmc0_set_power(void *mmc_host, int state) -{ - if (state) - bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD0PWR); - else - bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD0PWR, 0); - - msleep(1); -} - -static int pb1200mmc0_card_readonly(void *mmc_host) -{ - return (bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD0WP) ? 1 : 0; -} - -static int pb1200mmc0_card_inserted(void *mmc_host) -{ - return (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD0INSERT) ? 1 : 0; -} - -static void pb1200_mmcled_set(struct led_classdev *led, - enum led_brightness brightness) -{ - if (brightness != LED_OFF) { - if (++mmc_activity == 1) - bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED0, 0); - } else { - if (--mmc_activity == 0) - bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED0); - } -} - -static struct led_classdev pb1200mmc_led = { - .brightness_set = pb1200_mmcled_set, -}; - -static void pb1200mmc1_set_power(void *mmc_host, int state) -{ - if (state) - bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD1PWR); - else - bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD1PWR, 0); - - msleep(1); -} - -static int pb1200mmc1_card_readonly(void *mmc_host) -{ - return (bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD1WP) ? 1 : 0; -} - -static int pb1200mmc1_card_inserted(void *mmc_host) -{ - return (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD1INSERT) ? 1 : 0; -} - -static struct au1xmmc_platform_data pb1200mmc_platdata[2] = { - [0] = { - .set_power = pb1200mmc0_set_power, - .card_inserted = pb1200mmc0_card_inserted, - .card_readonly = pb1200mmc0_card_readonly, - .cd_setup = NULL, /* use poll-timer in driver */ - .led = &pb1200mmc_led, - }, - [1] = { - .set_power = pb1200mmc1_set_power, - .card_inserted = pb1200mmc1_card_inserted, - .card_readonly = pb1200mmc1_card_readonly, - .cd_setup = NULL, /* use poll-timer in driver */ - .led = &pb1200mmc_led, - }, -}; - -static u64 au1xxx_mmc_dmamask = DMA_BIT_MASK(32); - -static struct resource au1200_mmc0_res[] = { - [0] = { - .start = AU1100_SD0_PHYS_ADDR, - .end = AU1100_SD0_PHYS_ADDR + 0xfff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AU1200_SD_INT, - .end = AU1200_SD_INT, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = AU1200_DSCR_CMD0_SDMS_TX0, - .end = AU1200_DSCR_CMD0_SDMS_TX0, - .flags = IORESOURCE_DMA, - }, - [3] = { - .start = AU1200_DSCR_CMD0_SDMS_RX0, - .end = AU1200_DSCR_CMD0_SDMS_RX0, - .flags = IORESOURCE_DMA, - } -}; - -static struct platform_device pb1200_mmc0_dev = { - .name = "au1xxx-mmc", - .id = 0, - .dev = { - .dma_mask = &au1xxx_mmc_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &pb1200mmc_platdata[0], - }, - .num_resources = ARRAY_SIZE(au1200_mmc0_res), - .resource = au1200_mmc0_res, -}; - -static struct resource au1200_mmc1_res[] = { - [0] = { - .start = AU1100_SD1_PHYS_ADDR, - .end = AU1100_SD1_PHYS_ADDR + 0xfff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AU1200_SD_INT, - .end = AU1200_SD_INT, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = AU1200_DSCR_CMD0_SDMS_TX1, - .end = AU1200_DSCR_CMD0_SDMS_TX1, - .flags = IORESOURCE_DMA, - }, - [3] = { - .start = AU1200_DSCR_CMD0_SDMS_RX1, - .end = AU1200_DSCR_CMD0_SDMS_RX1, - .flags = IORESOURCE_DMA, - } -}; - -static struct platform_device pb1200_mmc1_dev = { - .name = "au1xxx-mmc", - .id = 1, - .dev = { - .dma_mask = &au1xxx_mmc_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &pb1200mmc_platdata[1], - }, - .num_resources = ARRAY_SIZE(au1200_mmc1_res), - .resource = au1200_mmc1_res, -}; - - -static struct resource ide_resources[] = { - [0] = { - .start = IDE_PHYS_ADDR, - .end = IDE_PHYS_ADDR + IDE_PHYS_LEN - 1, - .flags = IORESOURCE_MEM - }, - [1] = { - .start = IDE_INT, - .end = IDE_INT, - .flags = IORESOURCE_IRQ - }, - [2] = { - .start = AU1200_DSCR_CMD0_DMA_REQ1, - .end = AU1200_DSCR_CMD0_DMA_REQ1, - .flags = IORESOURCE_DMA, - }, -}; - -static u64 ide_dmamask = DMA_BIT_MASK(32); - -static struct platform_device ide_device = { - .name = "au1200-ide", - .id = 0, - .dev = { - .dma_mask = &ide_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .num_resources = ARRAY_SIZE(ide_resources), - .resource = ide_resources -}; - -static struct smc91x_platdata smc_data = { - .flags = SMC91X_NOWAIT | SMC91X_USE_16BIT, - .leda = RPC_LED_100_10, - .ledb = RPC_LED_TX_RX, -}; - -static struct resource smc91c111_resources[] = { - [0] = { - .name = "smc91x-regs", - .start = SMC91C111_PHYS_ADDR, - .end = SMC91C111_PHYS_ADDR + 0xf, - .flags = IORESOURCE_MEM - }, - [1] = { - .start = SMC91C111_INT, - .end = SMC91C111_INT, - .flags = IORESOURCE_IRQ - }, -}; - -static struct platform_device smc91c111_device = { - .dev = { - .platform_data = &smc_data, - }, - .name = "smc91x", - .id = -1, - .num_resources = ARRAY_SIZE(smc91c111_resources), - .resource = smc91c111_resources -}; - -static struct resource au1200_psc0_res[] = { - [0] = { - .start = AU1550_PSC0_PHYS_ADDR, - .end = AU1550_PSC0_PHYS_ADDR + 0xfff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AU1200_PSC0_INT, - .end = AU1200_PSC0_INT, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = AU1200_DSCR_CMD0_PSC0_TX, - .end = AU1200_DSCR_CMD0_PSC0_TX, - .flags = IORESOURCE_DMA, - }, - [3] = { - .start = AU1200_DSCR_CMD0_PSC0_RX, - .end = AU1200_DSCR_CMD0_PSC0_RX, - .flags = IORESOURCE_DMA, - }, -}; - -static struct platform_device pb1200_i2c_dev = { - .name = "au1xpsc_smbus", - .id = 0, /* bus number */ - .num_resources = ARRAY_SIZE(au1200_psc0_res), - .resource = au1200_psc0_res, -}; - -static struct resource au1200_lcd_res[] = { - [0] = { - .start = AU1200_LCD_PHYS_ADDR, - .end = AU1200_LCD_PHYS_ADDR + 0x800 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AU1200_LCD_INT, - .end = AU1200_LCD_INT, - .flags = IORESOURCE_IRQ, - } -}; - -static u64 au1200_lcd_dmamask = DMA_BIT_MASK(32); - -static struct platform_device au1200_lcd_dev = { - .name = "au1200-lcd", - .id = 0, - .dev = { - .dma_mask = &au1200_lcd_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .num_resources = ARRAY_SIZE(au1200_lcd_res), - .resource = au1200_lcd_res, -}; - -static struct platform_device *board_platform_devices[] __initdata = { - &ide_device, - &smc91c111_device, - &pb1200_i2c_dev, - &pb1200_mmc0_dev, - &pb1200_mmc1_dev, - &au1200_lcd_dev, -}; - -static int __init board_register_devices(void) -{ - int swapped; - - db1x_register_pcmcia_socket( - AU1000_PCMCIA_ATTR_PHYS_ADDR, - AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, - AU1000_PCMCIA_MEM_PHYS_ADDR, - AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, - AU1000_PCMCIA_IO_PHYS_ADDR, - AU1000_PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1, - PB1200_PC0_INT, PB1200_PC0_INSERT_INT, - /*PB1200_PC0_STSCHG_INT*/0, PB1200_PC0_EJECT_INT, 0); - - db1x_register_pcmcia_socket( - AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x008000000, - AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x008400000 - 1, - AU1000_PCMCIA_MEM_PHYS_ADDR + 0x008000000, - AU1000_PCMCIA_MEM_PHYS_ADDR + 0x008400000 - 1, - AU1000_PCMCIA_IO_PHYS_ADDR + 0x008000000, - AU1000_PCMCIA_IO_PHYS_ADDR + 0x008010000 - 1, - PB1200_PC1_INT, PB1200_PC1_INSERT_INT, - /*PB1200_PC1_STSCHG_INT*/0, PB1200_PC1_EJECT_INT, 1); - - swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1200_SWAPBOOT; - db1x_register_norflash(128 * 1024 * 1024, 2, swapped); - - return platform_add_devices(board_platform_devices, - ARRAY_SIZE(board_platform_devices)); -} -device_initcall(board_register_devices); diff --git a/arch/mips/alchemy/devboards/pb1500/board_setup.c b/arch/mips/alchemy/devboards/pb1500.c index 37c1883b5ea..e7b807b3ec5 100644 --- a/arch/mips/alchemy/devboards/pb1500/board_setup.c +++ b/arch/mips/alchemy/devboards/pb1500.c @@ -1,41 +1,37 @@ /* - * Copyright 2000, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. <source@mvista.com> + * Pb1500 board support. * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. + * Copyright (C) 2009 Manuel Lauss * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ #include <linux/delay.h> +#include <linux/dma-mapping.h> #include <linux/gpio.h> #include <linux/init.h> #include <linux/interrupt.h> - +#include <linux/platform_device.h> #include <asm/mach-au1x00/au1000.h> #include <asm/mach-db1x00/bcsr.h> - #include <prom.h> +#include "platform.h" const char *get_system_type(void) { - return "Alchemy Pb1500"; + return "PB1500"; } void __init board_setup(void) @@ -123,17 +119,80 @@ void __init board_setup(void) } } -static int __init pb1500_init_irq(void) +/******************************************************************************/ + +static int pb1500_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin) { - irq_set_irq_type(AU1500_GPIO9_INT, IRQF_TRIGGER_LOW); /* CD0# */ - irq_set_irq_type(AU1500_GPIO10_INT, IRQF_TRIGGER_LOW); /* CARD0 */ - irq_set_irq_type(AU1500_GPIO11_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */ + if ((slot < 12) || (slot > 13) || pin == 0) + return -1; + if (slot == 12) + return (pin == 1) ? AU1500_PCI_INTA : 0xff; + if (slot == 13) { + switch (pin) { + case 1: return AU1500_PCI_INTA; + case 2: return AU1500_PCI_INTB; + case 3: return AU1500_PCI_INTC; + case 4: return AU1500_PCI_INTD; + } + } + return -1; +} + +static struct resource alchemy_pci_host_res[] = { + [0] = { + .start = AU1500_PCI_PHYS_ADDR, + .end = AU1500_PCI_PHYS_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct alchemy_pci_platdata pb1500_pci_pd = { + .board_map_irq = pb1500_map_pci_irq, + .pci_cfg_set = PCI_CONFIG_AEN | PCI_CONFIG_R2H | PCI_CONFIG_R1H | + PCI_CONFIG_CH | +#if defined(__MIPSEB__) + PCI_CONFIG_SIC_HWA_DAT | PCI_CONFIG_SM, +#else + 0, +#endif +}; + +static struct platform_device pb1500_pci_host = { + .dev.platform_data = &pb1500_pci_pd, + .name = "alchemy-pci", + .id = 0, + .num_resources = ARRAY_SIZE(alchemy_pci_host_res), + .resource = alchemy_pci_host_res, +}; + +static int __init pb1500_dev_init(void) +{ + int swapped; + + irq_set_irq_type(AU1500_GPIO9_INT, IRQF_TRIGGER_LOW); /* CD0# */ + irq_set_irq_type(AU1500_GPIO10_INT, IRQF_TRIGGER_LOW); /* CARD0 */ + irq_set_irq_type(AU1500_GPIO11_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */ irq_set_irq_type(AU1500_GPIO204_INT, IRQF_TRIGGER_HIGH); irq_set_irq_type(AU1500_GPIO201_INT, IRQF_TRIGGER_LOW); irq_set_irq_type(AU1500_GPIO202_INT, IRQF_TRIGGER_LOW); irq_set_irq_type(AU1500_GPIO203_INT, IRQF_TRIGGER_LOW); irq_set_irq_type(AU1500_GPIO205_INT, IRQF_TRIGGER_LOW); + /* PCMCIA. single socket, identical to Pb1100 */ + db1x_register_pcmcia_socket( + AU1000_PCMCIA_ATTR_PHYS_ADDR, + AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, + AU1000_PCMCIA_MEM_PHYS_ADDR, + AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, + AU1000_PCMCIA_IO_PHYS_ADDR, + AU1000_PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1, + AU1500_GPIO11_INT, AU1500_GPIO9_INT, /* card / insert */ + /*AU1500_GPIO10_INT*/0, 0, 0); /* stschg / eject / id */ + + swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1000_SWAPBOOT; + db1x_register_norflash(64 * 1024 * 1024, 4, swapped); + platform_device_register(&pb1500_pci_host); + return 0; } -arch_initcall(pb1500_init_irq); +arch_initcall(pb1500_dev_init); diff --git a/arch/mips/alchemy/devboards/pb1500/Makefile b/arch/mips/alchemy/devboards/pb1500/Makefile deleted file mode 100644 index e83b151b5b6..00000000000 --- a/arch/mips/alchemy/devboards/pb1500/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Copyright 2000, 2001, 2008 MontaVista Software Inc. -# Author: MontaVista Software, Inc. <source@mvista.com> -# -# Makefile for the Alchemy Semiconductor Pb1500 board. -# - -obj-y := board_setup.o platform.o diff --git a/arch/mips/alchemy/devboards/pb1500/platform.c b/arch/mips/alchemy/devboards/pb1500/platform.c deleted file mode 100644 index 1e52a01bac0..00000000000 --- a/arch/mips/alchemy/devboards/pb1500/platform.c +++ /dev/null @@ -1,94 +0,0 @@ -/* - * Pb1500 board platform device registration - * - * Copyright (C) 2009 Manuel Lauss - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <linux/dma-mapping.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <asm/mach-au1x00/au1000.h> -#include <asm/mach-db1x00/bcsr.h> - -#include "../platform.h" - -static int pb1500_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin) -{ - if ((slot < 12) || (slot > 13) || pin == 0) - return -1; - if (slot == 12) - return (pin == 1) ? AU1500_PCI_INTA : 0xff; - if (slot == 13) { - switch (pin) { - case 1: return AU1500_PCI_INTA; - case 2: return AU1500_PCI_INTB; - case 3: return AU1500_PCI_INTC; - case 4: return AU1500_PCI_INTD; - } - } - return -1; -} - -static struct resource alchemy_pci_host_res[] = { - [0] = { - .start = AU1500_PCI_PHYS_ADDR, - .end = AU1500_PCI_PHYS_ADDR + 0xfff, - .flags = IORESOURCE_MEM, - }, -}; - -static struct alchemy_pci_platdata pb1500_pci_pd = { - .board_map_irq = pb1500_map_pci_irq, - .pci_cfg_set = PCI_CONFIG_AEN | PCI_CONFIG_R2H | PCI_CONFIG_R1H | - PCI_CONFIG_CH | -#if defined(__MIPSEB__) - PCI_CONFIG_SIC_HWA_DAT | PCI_CONFIG_SM, -#else - 0, -#endif -}; - -static struct platform_device pb1500_pci_host = { - .dev.platform_data = &pb1500_pci_pd, - .name = "alchemy-pci", - .id = 0, - .num_resources = ARRAY_SIZE(alchemy_pci_host_res), - .resource = alchemy_pci_host_res, -}; - -static int __init pb1500_dev_init(void) -{ - int swapped; - - /* PCMCIA. single socket, identical to Pb1100 */ - db1x_register_pcmcia_socket( - AU1000_PCMCIA_ATTR_PHYS_ADDR, - AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, - AU1000_PCMCIA_MEM_PHYS_ADDR, - AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, - AU1000_PCMCIA_IO_PHYS_ADDR, - AU1000_PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1, - AU1500_GPIO11_INT, AU1500_GPIO9_INT, /* card / insert */ - /*AU1500_GPIO10_INT*/0, 0, 0); /* stschg / eject / id */ - - swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1000_SWAPBOOT; - db1x_register_norflash(64 * 1024 * 1024, 4, swapped); - platform_device_register(&pb1500_pci_host); - - return 0; -} -arch_initcall(pb1500_dev_init); diff --git a/arch/mips/alchemy/devboards/pb1550/platform.c b/arch/mips/alchemy/devboards/pb1550.c index a4604b8a349..b37e7de8d92 100644 --- a/arch/mips/alchemy/devboards/pb1550/platform.c +++ b/arch/mips/alchemy/devboards/pb1550.c @@ -1,7 +1,7 @@ /* - * Pb1550 board platform device registration + * Pb1550 board support. * - * Copyright (C) 2009 Manuel Lauss + * Copyright (C) 2009-2011 Manuel Lauss * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -20,13 +20,44 @@ #include <linux/dma-mapping.h> #include <linux/init.h> +#include <linux/interrupt.h> #include <linux/platform_device.h> #include <asm/mach-au1x00/au1000.h> #include <asm/mach-au1x00/au1xxx_dbdma.h> -#include <asm/mach-pb1x00/pb1550.h> +#include <asm/mach-au1x00/au1550nd.h> +#include <asm/mach-au1x00/gpio.h> #include <asm/mach-db1x00/bcsr.h> +#include "platform.h" -#include "../platform.h" +const char *get_system_type(void) +{ + return "PB1550"; +} + +void __init board_setup(void) +{ + u32 pin_func; + + bcsr_init(PB1550_BCSR_PHYS_ADDR, + PB1550_BCSR_PHYS_ADDR + PB1550_BCSR_HEXLED_OFS); + + alchemy_gpio2_enable(); + + /* + * Enable PSC1 SYNC for AC'97. Normaly done in audio driver, + * but it is board specific code, so put it here. + */ + pin_func = au_readl(SYS_PINFUNC); + au_sync(); + pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1; + au_writel(pin_func, SYS_PINFUNC); + + bcsr_write(BCSR_PCMCIA, 0); /* turn off PCMCIA power */ + + printk(KERN_INFO "AMD Alchemy Pb1550 Board\n"); +} + +/******************************************************************************/ static int pb1550_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin) { @@ -101,10 +132,79 @@ static struct platform_device pb1550_i2c_dev = { .resource = au1550_psc2_res, }; +static struct mtd_partition pb1550_nand_parts[] = { + [0] = { + .name = "NAND FS 0", + .offset = 0, + .size = 8 * 1024 * 1024, + }, + [1] = { + .name = "NAND FS 1", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct au1550nd_platdata pb1550_nand_pd = { + .parts = pb1550_nand_parts, + .num_parts = ARRAY_SIZE(pb1550_nand_parts), + .devwidth = 0, /* x8 NAND default, needs fixing up */ +}; + +static struct resource pb1550_nand_res[] = { + [0] = { + .start = 0x20000000, + .end = 0x20000fff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device pb1550_nand_dev = { + .name = "au1550-nand", + .id = -1, + .resource = pb1550_nand_res, + .num_resources = ARRAY_SIZE(pb1550_nand_res), + .dev = { + .platform_data = &pb1550_nand_pd, + }, +}; + +static void __init pb1550_nand_setup(void) +{ + int boot_swapboot = (au_readl(MEM_STSTAT) & (0x7 << 1)) | + ((bcsr_read(BCSR_STATUS) >> 6) & 0x1); + + switch (boot_swapboot) { + case 0: + case 2: + case 8: + case 0xC: + case 0xD: + /* x16 NAND Flash */ + pb1550_nand_pd.devwidth = 1; + /* fallthrough */ + case 1: + case 9: + case 3: + case 0xE: + case 0xF: + /* x8 NAND, already set up */ + platform_device_register(&pb1550_nand_dev); + } +} + static int __init pb1550_dev_init(void) { int swapped; + irq_set_irq_type(AU1550_GPIO0_INT, IRQF_TRIGGER_LOW); + irq_set_irq_type(AU1550_GPIO1_INT, IRQF_TRIGGER_LOW); + irq_set_irq_type(AU1550_GPIO201_205_INT, IRQF_TRIGGER_HIGH); + + /* enable both PCMCIA card irqs in the shared line */ + alchemy_gpio2_enable_int(201); + alchemy_gpio2_enable_int(202); + /* Pb1550, like all others, also has statuschange irqs; however they're * wired up on one of the Au1550's shared GPIO201_205 line, which also * services the PCMCIA card interrupts. So we ignore statuschange and @@ -130,6 +230,10 @@ static int __init pb1550_dev_init(void) AU1000_PCMCIA_IO_PHYS_ADDR + 0x008010000 - 1, AU1550_GPIO201_205_INT, AU1550_GPIO1_INT, 0, 0, 1); + /* NAND setup */ + gpio_direction_input(206); /* GPIO206 high */ + pb1550_nand_setup(); + swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_PB1550_SWAPBOOT; db1x_register_norflash(128 * 1024 * 1024, 4, swapped); platform_device_register(&pb1550_pci_host); diff --git a/arch/mips/alchemy/devboards/pb1550/Makefile b/arch/mips/alchemy/devboards/pb1550/Makefile deleted file mode 100644 index 9661b6ec5dd..00000000000 --- a/arch/mips/alchemy/devboards/pb1550/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Copyright 2000, 2008 MontaVista Software Inc. -# Author: MontaVista Software, Inc. <source@mvista.com> -# -# Makefile for the Alchemy Semiconductor Pb1550 board. -# - -obj-y := board_setup.o platform.o diff --git a/arch/mips/alchemy/devboards/pb1550/board_setup.c b/arch/mips/alchemy/devboards/pb1550/board_setup.c deleted file mode 100644 index 0f62d1e3df2..00000000000 --- a/arch/mips/alchemy/devboards/pb1550/board_setup.c +++ /dev/null @@ -1,80 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * Alchemy Pb1550 board setup. - * - * Copyright 2000, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. <source@mvista.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/init.h> -#include <linux/interrupt.h> - -#include <asm/mach-au1x00/au1000.h> -#include <asm/mach-pb1x00/pb1550.h> -#include <asm/mach-db1x00/bcsr.h> -#include <asm/mach-au1x00/gpio.h> - -#include <prom.h> - -const char *get_system_type(void) -{ - return "Alchemy Pb1550"; -} - -void __init board_setup(void) -{ - u32 pin_func; - - bcsr_init(PB1550_BCSR_PHYS_ADDR, - PB1550_BCSR_PHYS_ADDR + PB1550_BCSR_HEXLED_OFS); - - alchemy_gpio2_enable(); - - /* - * Enable PSC1 SYNC for AC'97. Normaly done in audio driver, - * but it is board specific code, so put it here. - */ - pin_func = au_readl(SYS_PINFUNC); - au_sync(); - pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1; - au_writel(pin_func, SYS_PINFUNC); - - bcsr_write(BCSR_PCMCIA, 0); /* turn off PCMCIA power */ - - printk(KERN_INFO "AMD Alchemy Pb1550 Board\n"); -} - -static int __init pb1550_init_irq(void) -{ - irq_set_irq_type(AU1550_GPIO0_INT, IRQF_TRIGGER_LOW); - irq_set_irq_type(AU1550_GPIO1_INT, IRQF_TRIGGER_LOW); - irq_set_irq_type(AU1550_GPIO201_205_INT, IRQF_TRIGGER_HIGH); - - /* enable both PCMCIA card irqs in the shared line */ - alchemy_gpio2_enable_int(201); - alchemy_gpio2_enable_int(202); - - return 0; -} -arch_initcall(pb1550_init_irq); diff --git a/arch/mips/alchemy/devboards/platform.c b/arch/mips/alchemy/devboards/platform.c index 49a4b3244d8..621f70afb63 100644 --- a/arch/mips/alchemy/devboards/platform.c +++ b/arch/mips/alchemy/devboards/platform.c @@ -13,6 +13,13 @@ #include <asm/reboot.h> #include <asm/mach-db1x00/bcsr.h> + +static struct platform_device db1x00_rtc_dev = { + .name = "rtc-au1xxx", + .id = -1, +}; + + static void db1x_power_off(void) { bcsr_write(BCSR_RESETS, 0); @@ -25,7 +32,7 @@ static void db1x_reset(char *c) bcsr_write(BCSR_SYSTEM, 0); } -static int __init db1x_poweroff_setup(void) +static int __init db1x_late_setup(void) { if (!pm_power_off) pm_power_off = db1x_power_off; @@ -34,9 +41,11 @@ static int __init db1x_poweroff_setup(void) if (!_machine_restart) _machine_restart = db1x_reset; + platform_device_register(&db1x00_rtc_dev); + return 0; } -late_initcall(db1x_poweroff_setup); +device_initcall(db1x_late_setup); /* register a pcmcia socket */ int __init db1x_register_pcmcia_socket(phys_addr_t pcmcia_attr_start, diff --git a/arch/mips/alchemy/devboards/prom.c b/arch/mips/alchemy/devboards/prom.c index e5306b56da6..93a22107cc4 100644 --- a/arch/mips/alchemy/devboards/prom.c +++ b/arch/mips/alchemy/devboards/prom.c @@ -33,10 +33,9 @@ #include <asm/mach-au1x00/au1000.h> #include <prom.h> -#if defined(CONFIG_MIPS_PB1000) || defined(CONFIG_MIPS_DB1000) || \ - defined(CONFIG_MIPS_PB1100) || defined(CONFIG_MIPS_DB1100) || \ - defined(CONFIG_MIPS_PB1500) || defined(CONFIG_MIPS_DB1500) || \ - defined(CONFIG_MIPS_BOSPORUS) || defined(CONFIG_MIPS_MIRAGE) +#if defined(CONFIG_MIPS_DB1000) || \ + defined(CONFIG_MIPS_PB1100) || \ + defined(CONFIG_MIPS_PB1500) #define ALCHEMY_BOARD_DEFAULT_MEMSIZE 0x04000000 #else /* Au1550/Au1200-based develboards */ @@ -62,5 +61,9 @@ void __init prom_init(void) void prom_putchar(unsigned char c) { +#ifdef CONFIG_MIPS_DB1300 + alchemy_uart_putchar(AU1300_UART2_PHYS_ADDR, c); +#else alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c); +#endif } diff --git a/arch/mips/alchemy/gpr/Makefile b/arch/mips/alchemy/gpr/Makefile deleted file mode 100644 index cb73fe256dc..00000000000 --- a/arch/mips/alchemy/gpr/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Copyright 2003 MontaVista Software Inc. -# Author: MontaVista Software, Inc. <source@mvista.com> -# -# Makefile for Trapeze ITS GPR board. -# - -obj-y += board_setup.o init.o platform.o diff --git a/arch/mips/alchemy/gpr/board_setup.c b/arch/mips/alchemy/gpr/board_setup.c deleted file mode 100644 index dea45c78fdc..00000000000 --- a/arch/mips/alchemy/gpr/board_setup.c +++ /dev/null @@ -1,75 +0,0 @@ -/* - * Copyright 2010 Wolfgang Grandegger <wg@denx.de> - * - * Copyright 2000-2003, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. <source@mvista.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/delay.h> -#include <linux/pm.h> - -#include <asm/reboot.h> -#include <asm/mach-au1x00/au1000.h> - -#include <prom.h> - -static void gpr_reset(char *c) -{ - /* switch System-LED to orange (red# and green# on) */ - alchemy_gpio_direction_output(4, 0); - alchemy_gpio_direction_output(5, 0); - - /* trigger watchdog to reset board in 200ms */ - printk(KERN_EMERG "Triggering watchdog soft reset...\n"); - raw_local_irq_disable(); - alchemy_gpio_direction_output(1, 0); - udelay(1); - alchemy_gpio_set_value(1, 1); - while (1) - cpu_wait(); -} - -static void gpr_power_off(void) -{ - while (1) - cpu_wait(); -} - -void __init board_setup(void) -{ - printk(KERN_INFO "Trapeze ITS GPR board\n"); - - pm_power_off = gpr_power_off; - _machine_halt = gpr_power_off; - _machine_restart = gpr_reset; - - /* Enable UART1/3 */ - alchemy_uart_enable(AU1000_UART3_PHYS_ADDR); - alchemy_uart_enable(AU1000_UART1_PHYS_ADDR); - - /* Take away Reset of UMTS-card */ - alchemy_gpio_direction_output(215, 1); -} diff --git a/arch/mips/alchemy/gpr/init.c b/arch/mips/alchemy/gpr/init.c deleted file mode 100644 index 229aafae680..00000000000 --- a/arch/mips/alchemy/gpr/init.c +++ /dev/null @@ -1,63 +0,0 @@ -/* - * Copyright 2010 Wolfgang Grandegger <wg@denx.de> - * - * Copyright 2003, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. <source@mvista.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/init.h> -#include <linux/kernel.h> - -#include <asm/bootinfo.h> -#include <asm/mach-au1x00/au1000.h> - -#include <prom.h> - -const char *get_system_type(void) -{ - return "GPR"; -} - -void __init prom_init(void) -{ - unsigned char *memsize_str; - unsigned long memsize; - - prom_argc = fw_arg0; - prom_argv = (char **)fw_arg1; - prom_envp = (char **)fw_arg2; - - prom_init_cmdline(); - - memsize_str = prom_getenv("memsize"); - if (!memsize_str) - memsize = 0x04000000; - else - strict_strtoul(memsize_str, 0, &memsize); - add_memory_region(0, memsize, BOOT_MEM_RAM); -} - -void prom_putchar(unsigned char c) -{ - alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c); -} diff --git a/arch/mips/alchemy/mtx-1/Makefile b/arch/mips/alchemy/mtx-1/Makefile deleted file mode 100644 index 81b540ceaf8..00000000000 --- a/arch/mips/alchemy/mtx-1/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# Copyright 2003 MontaVista Software Inc. -# Author: MontaVista Software, Inc. <source@mvista.com> -# Bruno Randolf <bruno.randolf@4g-systems.biz> -# -# Makefile for 4G Systems MTX-1 board. -# - -obj-y += init.o board_setup.o platform.o diff --git a/arch/mips/alchemy/mtx-1/board_setup.c b/arch/mips/alchemy/mtx-1/board_setup.c deleted file mode 100644 index 851a5ab4c8f..00000000000 --- a/arch/mips/alchemy/mtx-1/board_setup.c +++ /dev/null @@ -1,94 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * 4G Systems MTX-1 board setup. - * - * Copyright 2003, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. <source@mvista.com> - * Bruno Randolf <bruno.randolf@4g-systems.biz> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/pm.h> - -#include <asm/reboot.h> -#include <asm/mach-au1x00/au1000.h> - -#include <prom.h> - -static void mtx1_reset(char *c) -{ - /* Jump to the reset vector */ - __asm__ __volatile__("jr\t%0"::"r"(0xbfc00000)); -} - -static void mtx1_power_off(void) -{ - while (1) - asm volatile ( - " .set mips32 \n" - " wait \n" - " .set mips0 \n"); -} - -void __init board_setup(void) -{ -#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) - /* Enable USB power switch */ - alchemy_gpio_direction_output(204, 0); -#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */ - - /* Initialize sys_pinfunc */ - au_writel(SYS_PF_NI2, SYS_PINFUNC); - - /* Initialize GPIO */ - au_writel(~0, KSEG1ADDR(AU1000_SYS_PHYS_ADDR) + SYS_TRIOUTCLR); - alchemy_gpio_direction_output(0, 0); /* Disable M66EN (PCI 66MHz) */ - alchemy_gpio_direction_output(3, 1); /* Disable PCI CLKRUN# */ - alchemy_gpio_direction_output(1, 1); /* Enable EXT_IO3 */ - alchemy_gpio_direction_output(5, 0); /* Disable eth PHY TX_ER */ - - /* Enable LED and set it to green */ - alchemy_gpio_direction_output(211, 1); /* green on */ - alchemy_gpio_direction_output(212, 0); /* red off */ - - pm_power_off = mtx1_power_off; - _machine_halt = mtx1_power_off; - _machine_restart = mtx1_reset; - - printk(KERN_INFO "4G Systems MTX-1 Board\n"); -} - -static int __init mtx1_init_irq(void) -{ - irq_set_irq_type(AU1500_GPIO204_INT, IRQF_TRIGGER_HIGH); - irq_set_irq_type(AU1500_GPIO201_INT, IRQF_TRIGGER_LOW); - irq_set_irq_type(AU1500_GPIO202_INT, IRQF_TRIGGER_LOW); - irq_set_irq_type(AU1500_GPIO203_INT, IRQF_TRIGGER_LOW); - irq_set_irq_type(AU1500_GPIO205_INT, IRQF_TRIGGER_LOW); - - return 0; -} -arch_initcall(mtx1_init_irq); diff --git a/arch/mips/alchemy/mtx-1/init.c b/arch/mips/alchemy/mtx-1/init.c deleted file mode 100644 index 2e81cc7f342..00000000000 --- a/arch/mips/alchemy/mtx-1/init.c +++ /dev/null @@ -1,66 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * 4G Systems MTX-1 board setup - * - * Copyright 2003, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. <source@mvista.com> - * Bruno Randolf <bruno.randolf@4g-systems.biz> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/kernel.h> -#include <linux/init.h> - -#include <asm/bootinfo.h> -#include <asm/mach-au1x00/au1000.h> - -#include <prom.h> - -const char *get_system_type(void) -{ - return "MTX-1"; -} - -void __init prom_init(void) -{ - unsigned char *memsize_str; - unsigned long memsize; - - prom_argc = fw_arg0; - prom_argv = (char **)fw_arg1; - prom_envp = (char **)fw_arg2; - - prom_init_cmdline(); - - memsize_str = prom_getenv("memsize"); - if (!memsize_str) - memsize = 0x04000000; - else - strict_strtoul(memsize_str, 0, &memsize); - add_memory_region(0, memsize, BOOT_MEM_RAM); -} - -void prom_putchar(unsigned char c) -{ - alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c); -} diff --git a/arch/mips/alchemy/xxs1500/Makefile b/arch/mips/alchemy/xxs1500/Makefile deleted file mode 100644 index 91defcf4f33..00000000000 --- a/arch/mips/alchemy/xxs1500/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Copyright 2003 MontaVista Software Inc. -# Author: MontaVista Software, Inc. <source@mvista.com> -# -# Makefile for MyCable XXS1500 board. -# - -obj-y += init.o board_setup.o platform.o diff --git a/arch/mips/alchemy/xxs1500/board_setup.c b/arch/mips/alchemy/xxs1500/board_setup.c deleted file mode 100644 index 3fa83f72e01..00000000000 --- a/arch/mips/alchemy/xxs1500/board_setup.c +++ /dev/null @@ -1,93 +0,0 @@ -/* - * Copyright 2000-2003, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. <source@mvista.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/delay.h> -#include <linux/pm.h> - -#include <asm/reboot.h> -#include <asm/mach-au1x00/au1000.h> - -#include <prom.h> - -static void xxs1500_reset(char *c) -{ - /* Jump to the reset vector */ - __asm__ __volatile__("jr\t%0"::"r"(0xbfc00000)); -} - -static void xxs1500_power_off(void) -{ - while (1) - asm volatile ( - " .set mips32 \n" - " wait \n" - " .set mips0 \n"); -} - -void __init board_setup(void) -{ - u32 pin_func; - - pm_power_off = xxs1500_power_off; - _machine_halt = xxs1500_power_off; - _machine_restart = xxs1500_reset; - - alchemy_gpio1_input_enable(); - alchemy_gpio2_enable(); - - /* Set multiple use pins (UART3/GPIO) to UART (it's used as UART too) */ - pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_UR3; - pin_func |= SYS_PF_UR3; - au_writel(pin_func, SYS_PINFUNC); - - /* Enable UART */ - alchemy_uart_enable(AU1000_UART3_PHYS_ADDR); - /* Enable DTR (MCR bit 0) = USB power up */ - __raw_writel(1, (void __iomem *)KSEG1ADDR(AU1000_UART3_PHYS_ADDR + 0x18)); - wmb(); -} - -static int __init xxs1500_init_irq(void) -{ - irq_set_irq_type(AU1500_GPIO204_INT, IRQF_TRIGGER_HIGH); - irq_set_irq_type(AU1500_GPIO201_INT, IRQF_TRIGGER_LOW); - irq_set_irq_type(AU1500_GPIO202_INT, IRQF_TRIGGER_LOW); - irq_set_irq_type(AU1500_GPIO203_INT, IRQF_TRIGGER_LOW); - irq_set_irq_type(AU1500_GPIO205_INT, IRQF_TRIGGER_LOW); - irq_set_irq_type(AU1500_GPIO207_INT, IRQF_TRIGGER_LOW); - - irq_set_irq_type(AU1500_GPIO0_INT, IRQF_TRIGGER_LOW); - irq_set_irq_type(AU1500_GPIO1_INT, IRQF_TRIGGER_LOW); - irq_set_irq_type(AU1500_GPIO2_INT, IRQF_TRIGGER_LOW); - irq_set_irq_type(AU1500_GPIO3_INT, IRQF_TRIGGER_LOW); - irq_set_irq_type(AU1500_GPIO4_INT, IRQF_TRIGGER_LOW); /* CF irq */ - irq_set_irq_type(AU1500_GPIO5_INT, IRQF_TRIGGER_LOW); - - return 0; -} -arch_initcall(xxs1500_init_irq); diff --git a/arch/mips/alchemy/xxs1500/init.c b/arch/mips/alchemy/xxs1500/init.c deleted file mode 100644 index 0ee02cfa989..00000000000 --- a/arch/mips/alchemy/xxs1500/init.c +++ /dev/null @@ -1,63 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * XXS1500 board setup - * - * Copyright 2003, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. <source@mvista.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/init.h> -#include <linux/kernel.h> - -#include <asm/bootinfo.h> -#include <asm/mach-au1x00/au1000.h> - -#include <prom.h> - -const char *get_system_type(void) -{ - return "XXS1500"; -} - -void __init prom_init(void) -{ - unsigned char *memsize_str; - unsigned long memsize; - - prom_argc = fw_arg0; - prom_argv = (char **)fw_arg1; - prom_envp = (char **)fw_arg2; - - prom_init_cmdline(); - - memsize_str = prom_getenv("memsize"); - if (!memsize_str || strict_strtoul(memsize_str, 0, &memsize)) - memsize = 0x04000000; - - add_memory_region(0, memsize, BOOT_MEM_RAM); -} - -void prom_putchar(unsigned char c) -{ - alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c); -} diff --git a/arch/mips/alchemy/xxs1500/platform.c b/arch/mips/alchemy/xxs1500/platform.c deleted file mode 100644 index 06a3a459b8a..00000000000 --- a/arch/mips/alchemy/xxs1500/platform.c +++ /dev/null @@ -1,63 +0,0 @@ -/* - * XXS1500 board platform device registration - * - * Copyright (C) 2009 Manuel Lauss - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <linux/init.h> -#include <linux/platform_device.h> - -#include <asm/mach-au1x00/au1000.h> - -static struct resource xxs1500_pcmcia_res[] = { - { - .name = "pcmcia-io", - .flags = IORESOURCE_MEM, - .start = AU1000_PCMCIA_IO_PHYS_ADDR, - .end = AU1000_PCMCIA_IO_PHYS_ADDR + 0x000400000 - 1, - }, - { - .name = "pcmcia-attr", - .flags = IORESOURCE_MEM, - .start = AU1000_PCMCIA_ATTR_PHYS_ADDR, - .end = AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, - }, - { - .name = "pcmcia-mem", - .flags = IORESOURCE_MEM, - .start = AU1000_PCMCIA_MEM_PHYS_ADDR, - .end = AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, - }, -}; - -static struct platform_device xxs1500_pcmcia_dev = { - .name = "xxs1500_pcmcia", - .id = -1, - .num_resources = ARRAY_SIZE(xxs1500_pcmcia_res), - .resource = xxs1500_pcmcia_res, -}; - -static struct platform_device *xxs1500_devs[] __initdata = { - &xxs1500_pcmcia_dev, -}; - -static int __init xxs1500_dev_init(void) -{ - return platform_add_devices(xxs1500_devs, - ARRAY_SIZE(xxs1500_devs)); -} -device_initcall(xxs1500_dev_init); diff --git a/arch/mips/ar7/gpio.c b/arch/mips/ar7/gpio.c index bb571bcdb8f..d8dbd8f0c1d 100644 --- a/arch/mips/ar7/gpio.c +++ b/arch/mips/ar7/gpio.c @@ -217,7 +217,7 @@ struct titan_gpio_cfg { u32 func; }; -static struct titan_gpio_cfg titan_gpio_table[] = { +static const struct titan_gpio_cfg titan_gpio_table[] = { /* reg, start bit, mux value */ {4, 24, 1}, {4, 26, 1}, diff --git a/arch/mips/ar7/platform.c b/arch/mips/ar7/platform.c index 33ffecf6a6d..1a24d317e7a 100644 --- a/arch/mips/ar7/platform.c +++ b/arch/mips/ar7/platform.c @@ -462,6 +462,40 @@ static struct gpio_led fb_fon_leds[] = { }, }; +static struct gpio_led gt701_leds[] = { + { + .name = "inet:green", + .gpio = 13, + .active_low = 1, + }, + { + .name = "usb", + .gpio = 12, + .active_low = 1, + }, + { + .name = "inet:red", + .gpio = 9, + .active_low = 1, + }, + { + .name = "power:red", + .gpio = 7, + .active_low = 1, + }, + { + .name = "power:green", + .gpio = 8, + .active_low = 1, + .default_trigger = "default-on", + }, + { + .name = "ethernet", + .gpio = 10, + .active_low = 1, + }, +}; + static struct gpio_led_platform_data ar7_led_data; static struct platform_device ar7_gpio_leds = { @@ -503,6 +537,9 @@ static void __init detect_leds(void) } else if (strstr(prid, "CYWM") || strstr(prid, "CYWL")) { ar7_led_data.num_leds = ARRAY_SIZE(titan_leds); ar7_led_data.leds = titan_leds; + } else if (strstr(prid, "GT701")) { + ar7_led_data.num_leds = ARRAY_SIZE(gt701_leds); + ar7_led_data.leds = gt701_leds; } } @@ -536,7 +573,7 @@ static int __init ar7_register_uarts(void) bus_clk = clk_get(NULL, "bus"); if (IS_ERR(bus_clk)) - panic("unable to get bus clk\n"); + panic("unable to get bus clk"); uart_port.type = PORT_AR7; uart_port.uartclk = clk_get_rate(bus_clk) / 2; diff --git a/arch/mips/ar7/prom.c b/arch/mips/ar7/prom.c index 8088c6fdb83..a23adc49d50 100644 --- a/arch/mips/ar7/prom.c +++ b/arch/mips/ar7/prom.c @@ -69,7 +69,7 @@ struct psbl_rec { u32 ffs_size; }; -static __initdata char psp_env_version[] = "TIENV0.8"; +static const char psp_env_version[] __initconst = "TIENV0.8"; struct psp_env_chunk { u8 num; @@ -84,7 +84,7 @@ struct psp_var_map_entry { char *value; }; -static struct psp_var_map_entry psp_var_map[] = { +static const struct psp_var_map_entry psp_var_map[] = { { 1, "cpufrequency" }, { 2, "memsize" }, { 3, "flashsize" }, diff --git a/arch/mips/ar7/setup.c b/arch/mips/ar7/setup.c index f20b53e597c..9a357fffcfb 100644 --- a/arch/mips/ar7/setup.c +++ b/arch/mips/ar7/setup.c @@ -96,7 +96,7 @@ void __init plat_mem_setup(void) io_base = (unsigned long)ioremap(AR7_REGS_BASE, 0x10000); if (!io_base) - panic("Can't remap IO base!\n"); + panic("Can't remap IO base!"); set_io_port_base(io_base); prom_meminit(); diff --git a/arch/mips/ath79/Kconfig b/arch/mips/ath79/Kconfig index 47707410582..e0fae8f4442 100644 --- a/arch/mips/ath79/Kconfig +++ b/arch/mips/ath79/Kconfig @@ -2,13 +2,26 @@ if ATH79 menu "Atheros AR71XX/AR724X/AR913X machine selection" +config ATH79_MACH_AP121 + bool "Atheros AP121 reference board" + select SOC_AR933X + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_SPI + select ATH79_DEV_USB + select ATH79_DEV_WMAC + help + Say 'Y' here if you want your kernel to support the + Atheros AP121 reference board. + config ATH79_MACH_AP81 bool "Atheros AP81 reference board" select SOC_AR913X - select ATH79_DEV_AR913X_WMAC select ATH79_DEV_GPIO_BUTTONS select ATH79_DEV_LEDS_GPIO select ATH79_DEV_SPI + select ATH79_DEV_USB + select ATH79_DEV_WMAC help Say 'Y' here if you want your kernel to support the Atheros AP81 reference board. @@ -19,10 +32,21 @@ config ATH79_MACH_PB44 select ATH79_DEV_GPIO_BUTTONS select ATH79_DEV_LEDS_GPIO select ATH79_DEV_SPI + select ATH79_DEV_USB help Say 'Y' here if you want your kernel to support the Atheros PB44 reference board. +config ATH79_MACH_UBNT_XM + bool "Ubiquiti Networks XM (rev 1.0) board" + select SOC_AR724X + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_SPI + help + Say 'Y' here if you want your kernel to support the + Ubiquiti Networks XM (rev 1.0) board. + endmenu config SOC_AR71XX @@ -33,14 +57,15 @@ config SOC_AR71XX config SOC_AR724X select USB_ARCH_HAS_EHCI select USB_ARCH_HAS_OHCI + select HW_HAS_PCI def_bool n config SOC_AR913X select USB_ARCH_HAS_EHCI def_bool n -config ATH79_DEV_AR913X_WMAC - depends on SOC_AR913X +config SOC_AR933X + select USB_ARCH_HAS_EHCI def_bool n config ATH79_DEV_GPIO_BUTTONS @@ -52,4 +77,11 @@ config ATH79_DEV_LEDS_GPIO config ATH79_DEV_SPI def_bool n +config ATH79_DEV_USB + def_bool n + +config ATH79_DEV_WMAC + depends on (SOC_AR913X || SOC_AR933X) + def_bool n + endif diff --git a/arch/mips/ath79/Makefile b/arch/mips/ath79/Makefile index c33d4653007..3b911e09dbe 100644 --- a/arch/mips/ath79/Makefile +++ b/arch/mips/ath79/Makefile @@ -16,13 +16,16 @@ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o # Devices # obj-y += dev-common.o -obj-$(CONFIG_ATH79_DEV_AR913X_WMAC) += dev-ar913x-wmac.o obj-$(CONFIG_ATH79_DEV_GPIO_BUTTONS) += dev-gpio-buttons.o obj-$(CONFIG_ATH79_DEV_LEDS_GPIO) += dev-leds-gpio.o obj-$(CONFIG_ATH79_DEV_SPI) += dev-spi.o +obj-$(CONFIG_ATH79_DEV_USB) += dev-usb.o +obj-$(CONFIG_ATH79_DEV_WMAC) += dev-wmac.o # # Machines # +obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o obj-$(CONFIG_ATH79_MACH_AP81) += mach-ap81.o obj-$(CONFIG_ATH79_MACH_PB44) += mach-pb44.o +obj-$(CONFIG_ATH79_MACH_UBNT_XM) += mach-ubnt-xm.o diff --git a/arch/mips/ath79/clock.c b/arch/mips/ath79/clock.c index 680bde99a26..54d0eb4db98 100644 --- a/arch/mips/ath79/clock.c +++ b/arch/mips/ath79/clock.c @@ -110,6 +110,59 @@ static void __init ar913x_clocks_init(void) ath79_uart_clk.rate = ath79_ahb_clk.rate; } +static void __init ar933x_clocks_init(void) +{ + u32 clock_ctrl; + u32 cpu_config; + u32 freq; + u32 t; + + t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP); + if (t & AR933X_BOOTSTRAP_REF_CLK_40) + ath79_ref_clk.rate = (40 * 1000 * 1000); + else + ath79_ref_clk.rate = (25 * 1000 * 1000); + + clock_ctrl = ath79_pll_rr(AR933X_PLL_CLOCK_CTRL_REG); + if (clock_ctrl & AR933X_PLL_CLOCK_CTRL_BYPASS) { + ath79_cpu_clk.rate = ath79_ref_clk.rate; + ath79_ahb_clk.rate = ath79_ref_clk.rate; + ath79_ddr_clk.rate = ath79_ref_clk.rate; + } else { + cpu_config = ath79_pll_rr(AR933X_PLL_CPU_CONFIG_REG); + + t = (cpu_config >> AR933X_PLL_CPU_CONFIG_REFDIV_SHIFT) & + AR933X_PLL_CPU_CONFIG_REFDIV_MASK; + freq = ath79_ref_clk.rate / t; + + t = (cpu_config >> AR933X_PLL_CPU_CONFIG_NINT_SHIFT) & + AR933X_PLL_CPU_CONFIG_NINT_MASK; + freq *= t; + + t = (cpu_config >> AR933X_PLL_CPU_CONFIG_OUTDIV_SHIFT) & + AR933X_PLL_CPU_CONFIG_OUTDIV_MASK; + if (t == 0) + t = 1; + + freq >>= t; + + t = ((clock_ctrl >> AR933X_PLL_CLOCK_CTRL_CPU_DIV_SHIFT) & + AR933X_PLL_CLOCK_CTRL_CPU_DIV_MASK) + 1; + ath79_cpu_clk.rate = freq / t; + + t = ((clock_ctrl >> AR933X_PLL_CLOCK_CTRL_DDR_DIV_SHIFT) & + AR933X_PLL_CLOCK_CTRL_DDR_DIV_MASK) + 1; + ath79_ddr_clk.rate = freq / t; + + t = ((clock_ctrl >> AR933X_PLL_CLOCK_CTRL_AHB_DIV_SHIFT) & + AR933X_PLL_CLOCK_CTRL_AHB_DIV_MASK) + 1; + ath79_ahb_clk.rate = freq / t; + } + + ath79_wdt_clk.rate = ath79_ref_clk.rate; + ath79_uart_clk.rate = ath79_ref_clk.rate; +} + void __init ath79_clocks_init(void) { if (soc_is_ar71xx()) @@ -118,6 +171,8 @@ void __init ath79_clocks_init(void) ar724x_clocks_init(); else if (soc_is_ar913x()) ar913x_clocks_init(); + else if (soc_is_ar933x()) + ar933x_clocks_init(); else BUG(); diff --git a/arch/mips/ath79/common.c b/arch/mips/ath79/common.c index 58f60e722a0..f0fda982b96 100644 --- a/arch/mips/ath79/common.c +++ b/arch/mips/ath79/common.c @@ -30,6 +30,7 @@ u32 ath79_ddr_freq; EXPORT_SYMBOL_GPL(ath79_ddr_freq); enum ath79_soc_type ath79_soc; +unsigned int ath79_soc_rev; void __iomem *ath79_pll_base; void __iomem *ath79_reset_base; @@ -64,6 +65,8 @@ void ath79_device_reset_set(u32 mask) reg = AR724X_RESET_REG_RESET_MODULE; else if (soc_is_ar913x()) reg = AR913X_RESET_REG_RESET_MODULE; + else if (soc_is_ar933x()) + reg = AR933X_RESET_REG_RESET_MODULE; else BUG(); @@ -86,6 +89,8 @@ void ath79_device_reset_clear(u32 mask) reg = AR724X_RESET_REG_RESET_MODULE; else if (soc_is_ar913x()) reg = AR913X_RESET_REG_RESET_MODULE; + else if (soc_is_ar933x()) + reg = AR933X_RESET_REG_RESET_MODULE; else BUG(); diff --git a/arch/mips/ath79/dev-ar913x-wmac.c b/arch/mips/ath79/dev-ar913x-wmac.c deleted file mode 100644 index 48f425a5ba2..00000000000 --- a/arch/mips/ath79/dev-ar913x-wmac.c +++ /dev/null @@ -1,60 +0,0 @@ -/* - * Atheros AR913X SoC built-in WMAC device support - * - * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/irq.h> -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> -#include "dev-ar913x-wmac.h" - -static struct ath9k_platform_data ar913x_wmac_data; - -static struct resource ar913x_wmac_resources[] = { - { - .start = AR913X_WMAC_BASE, - .end = AR913X_WMAC_BASE + AR913X_WMAC_SIZE - 1, - .flags = IORESOURCE_MEM, - }, { - .start = ATH79_CPU_IRQ_IP2, - .end = ATH79_CPU_IRQ_IP2, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device ar913x_wmac_device = { - .name = "ath9k", - .id = -1, - .resource = ar913x_wmac_resources, - .num_resources = ARRAY_SIZE(ar913x_wmac_resources), - .dev = { - .platform_data = &ar913x_wmac_data, - }, -}; - -void __init ath79_register_ar913x_wmac(u8 *cal_data) -{ - if (cal_data) - memcpy(ar913x_wmac_data.eeprom_data, cal_data, - sizeof(ar913x_wmac_data.eeprom_data)); - - /* reset the WMAC */ - ath79_device_reset_set(AR913X_RESET_AMBA2WMAC); - mdelay(10); - - ath79_device_reset_clear(AR913X_RESET_AMBA2WMAC); - mdelay(10); - - platform_device_register(&ar913x_wmac_device); -} diff --git a/arch/mips/ath79/dev-common.c b/arch/mips/ath79/dev-common.c index 3b82e325beb..f4956f80907 100644 --- a/arch/mips/ath79/dev-common.c +++ b/arch/mips/ath79/dev-common.c @@ -20,6 +20,7 @@ #include <asm/mach-ath79/ath79.h> #include <asm/mach-ath79/ar71xx_regs.h> +#include <asm/mach-ath79/ar933x_uart_platform.h> #include "common.h" #include "dev-common.h" @@ -54,6 +55,30 @@ static struct platform_device ath79_uart_device = { }, }; +static struct resource ar933x_uart_resources[] = { + { + .start = AR933X_UART_BASE, + .end = AR933X_UART_BASE + AR71XX_UART_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = ATH79_MISC_IRQ_UART, + .end = ATH79_MISC_IRQ_UART, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct ar933x_uart_platform_data ar933x_uart_data; +static struct platform_device ar933x_uart_device = { + .name = "ar933x-uart", + .id = -1, + .resource = ar933x_uart_resources, + .num_resources = ARRAY_SIZE(ar933x_uart_resources), + .dev = { + .platform_data = &ar933x_uart_data, + }, +}; + void __init ath79_register_uart(void) { struct clk *clk; @@ -62,8 +87,17 @@ void __init ath79_register_uart(void) if (IS_ERR(clk)) panic("unable to get UART clock, err=%ld", PTR_ERR(clk)); - ath79_uart_data[0].uartclk = clk_get_rate(clk); - platform_device_register(&ath79_uart_device); + if (soc_is_ar71xx() || + soc_is_ar724x() || + soc_is_ar913x()) { + ath79_uart_data[0].uartclk = clk_get_rate(clk); + platform_device_register(&ath79_uart_device); + } else if (soc_is_ar933x()) { + ar933x_uart_data.uartclk = clk_get_rate(clk); + platform_device_register(&ar933x_uart_device); + } else { + BUG(); + } } static struct platform_device ath79_wdt_device = { diff --git a/arch/mips/ath79/dev-usb.c b/arch/mips/ath79/dev-usb.c new file mode 100644 index 00000000000..002d6d2afe0 --- /dev/null +++ b/arch/mips/ath79/dev-usb.c @@ -0,0 +1,197 @@ +/* + * Atheros AR7XXX/AR9XXX USB Host Controller device + * + * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * Parts of this file are based on Atheros' 2.6.15 BSP + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/irq.h> +#include <linux/dma-mapping.h> +#include <linux/platform_device.h> + +#include <asm/mach-ath79/ath79.h> +#include <asm/mach-ath79/ar71xx_regs.h> +#include "common.h" +#include "dev-usb.h" + +static struct resource ath79_ohci_resources[] = { + [0] = { + /* .start and .end fields are filled dynamically */ + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = ATH79_MISC_IRQ_OHCI, + .end = ATH79_MISC_IRQ_OHCI, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 ath79_ohci_dmamask = DMA_BIT_MASK(32); +static struct platform_device ath79_ohci_device = { + .name = "ath79-ohci", + .id = -1, + .resource = ath79_ohci_resources, + .num_resources = ARRAY_SIZE(ath79_ohci_resources), + .dev = { + .dma_mask = &ath79_ohci_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +static struct resource ath79_ehci_resources[] = { + [0] = { + /* .start and .end fields are filled dynamically */ + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = ATH79_CPU_IRQ_USB, + .end = ATH79_CPU_IRQ_USB, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 ath79_ehci_dmamask = DMA_BIT_MASK(32); +static struct platform_device ath79_ehci_device = { + .name = "ath79-ehci", + .id = -1, + .resource = ath79_ehci_resources, + .num_resources = ARRAY_SIZE(ath79_ehci_resources), + .dev = { + .dma_mask = &ath79_ehci_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +#define AR71XX_USB_RESET_MASK (AR71XX_RESET_USB_HOST | \ + AR71XX_RESET_USB_PHY | \ + AR71XX_RESET_USB_OHCI_DLL) + +static void __init ath79_usb_setup(void) +{ + void __iomem *usb_ctrl_base; + + ath79_device_reset_set(AR71XX_USB_RESET_MASK); + mdelay(1000); + ath79_device_reset_clear(AR71XX_USB_RESET_MASK); + + usb_ctrl_base = ioremap(AR71XX_USB_CTRL_BASE, AR71XX_USB_CTRL_SIZE); + + /* Turning on the Buff and Desc swap bits */ + __raw_writel(0xf0000, usb_ctrl_base + AR71XX_USB_CTRL_REG_CONFIG); + + /* WAR for HW bug. Here it adjusts the duration between two SOFS */ + __raw_writel(0x20c00, usb_ctrl_base + AR71XX_USB_CTRL_REG_FLADJ); + + iounmap(usb_ctrl_base); + + mdelay(900); + + ath79_ohci_resources[0].start = AR71XX_OHCI_BASE; + ath79_ohci_resources[0].end = AR71XX_OHCI_BASE + AR71XX_OHCI_SIZE - 1; + platform_device_register(&ath79_ohci_device); + + ath79_ehci_resources[0].start = AR71XX_EHCI_BASE; + ath79_ehci_resources[0].end = AR71XX_EHCI_BASE + AR71XX_EHCI_SIZE - 1; + ath79_ehci_device.name = "ar71xx-ehci"; + platform_device_register(&ath79_ehci_device); +} + +static void __init ar7240_usb_setup(void) +{ + void __iomem *usb_ctrl_base; + + ath79_device_reset_clear(AR7240_RESET_OHCI_DLL); + ath79_device_reset_set(AR7240_RESET_USB_HOST); + + mdelay(1000); + + ath79_device_reset_set(AR7240_RESET_OHCI_DLL); + ath79_device_reset_clear(AR7240_RESET_USB_HOST); + + usb_ctrl_base = ioremap(AR7240_USB_CTRL_BASE, AR7240_USB_CTRL_SIZE); + + /* WAR for HW bug. Here it adjusts the duration between two SOFS */ + __raw_writel(0x3, usb_ctrl_base + AR71XX_USB_CTRL_REG_FLADJ); + + iounmap(usb_ctrl_base); + + ath79_ohci_resources[0].start = AR7240_OHCI_BASE; + ath79_ohci_resources[0].end = AR7240_OHCI_BASE + AR7240_OHCI_SIZE - 1; + platform_device_register(&ath79_ohci_device); +} + +static void __init ar724x_usb_setup(void) +{ + ath79_device_reset_set(AR724X_RESET_USBSUS_OVERRIDE); + mdelay(10); + + ath79_device_reset_clear(AR724X_RESET_USB_HOST); + mdelay(10); + + ath79_device_reset_clear(AR724X_RESET_USB_PHY); + mdelay(10); + + ath79_ehci_resources[0].start = AR724X_EHCI_BASE; + ath79_ehci_resources[0].end = AR724X_EHCI_BASE + AR724X_EHCI_SIZE - 1; + ath79_ehci_device.name = "ar724x-ehci"; + platform_device_register(&ath79_ehci_device); +} + +static void __init ar913x_usb_setup(void) +{ + ath79_device_reset_set(AR913X_RESET_USBSUS_OVERRIDE); + mdelay(10); + + ath79_device_reset_clear(AR913X_RESET_USB_HOST); + mdelay(10); + + ath79_device_reset_clear(AR913X_RESET_USB_PHY); + mdelay(10); + + ath79_ehci_resources[0].start = AR913X_EHCI_BASE; + ath79_ehci_resources[0].end = AR913X_EHCI_BASE + AR913X_EHCI_SIZE - 1; + ath79_ehci_device.name = "ar913x-ehci"; + platform_device_register(&ath79_ehci_device); +} + +static void __init ar933x_usb_setup(void) +{ + ath79_device_reset_set(AR933X_RESET_USBSUS_OVERRIDE); + mdelay(10); + + ath79_device_reset_clear(AR933X_RESET_USB_HOST); + mdelay(10); + + ath79_device_reset_clear(AR933X_RESET_USB_PHY); + mdelay(10); + + ath79_ehci_resources[0].start = AR933X_EHCI_BASE; + ath79_ehci_resources[0].end = AR933X_EHCI_BASE + AR933X_EHCI_SIZE - 1; + ath79_ehci_device.name = "ar933x-ehci"; + platform_device_register(&ath79_ehci_device); +} + +void __init ath79_register_usb(void) +{ + if (soc_is_ar71xx()) + ath79_usb_setup(); + else if (soc_is_ar7240()) + ar7240_usb_setup(); + else if (soc_is_ar7241() || soc_is_ar7242()) + ar724x_usb_setup(); + else if (soc_is_ar913x()) + ar913x_usb_setup(); + else if (soc_is_ar933x()) + ar933x_usb_setup(); + else + BUG(); +} diff --git a/arch/mips/ath79/dev-ar913x-wmac.h b/arch/mips/ath79/dev-usb.h index 579d562bbda..4b86a69ca08 100644 --- a/arch/mips/ath79/dev-ar913x-wmac.h +++ b/arch/mips/ath79/dev-usb.h @@ -1,5 +1,5 @@ /* - * Atheros AR913X SoC built-in WMAC device support + * Atheros AR71XX/AR724X/AR913X USB Host Controller support * * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> @@ -9,9 +9,9 @@ * by the Free Software Foundation. */ -#ifndef _ATH79_DEV_AR913X_WMAC_H -#define _ATH79_DEV_AR913X_WMAC_H +#ifndef _ATH79_DEV_USB_H +#define _ATH79_DEV_USB_H -void ath79_register_ar913x_wmac(u8 *cal_data); +void ath79_register_usb(void); -#endif /* _ATH79_DEV_AR913X_WMAC_H */ +#endif /* _ATH79_DEV_USB_H */ diff --git a/arch/mips/ath79/dev-wmac.c b/arch/mips/ath79/dev-wmac.c new file mode 100644 index 00000000000..24f546985b6 --- /dev/null +++ b/arch/mips/ath79/dev-wmac.c @@ -0,0 +1,109 @@ +/* + * Atheros AR913X/AR933X SoC built-in WMAC device support + * + * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/irq.h> +#include <linux/platform_device.h> +#include <linux/ath9k_platform.h> + +#include <asm/mach-ath79/ath79.h> +#include <asm/mach-ath79/ar71xx_regs.h> +#include "dev-wmac.h" + +static struct ath9k_platform_data ath79_wmac_data; + +static struct resource ath79_wmac_resources[] = { + { + /* .start and .end fields are filled dynamically */ + .flags = IORESOURCE_MEM, + }, { + .start = ATH79_CPU_IRQ_IP2, + .end = ATH79_CPU_IRQ_IP2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device ath79_wmac_device = { + .name = "ath9k", + .id = -1, + .resource = ath79_wmac_resources, + .num_resources = ARRAY_SIZE(ath79_wmac_resources), + .dev = { + .platform_data = &ath79_wmac_data, + }, +}; + +static void __init ar913x_wmac_setup(void) +{ + /* reset the WMAC */ + ath79_device_reset_set(AR913X_RESET_AMBA2WMAC); + mdelay(10); + + ath79_device_reset_clear(AR913X_RESET_AMBA2WMAC); + mdelay(10); + + ath79_wmac_resources[0].start = AR913X_WMAC_BASE; + ath79_wmac_resources[0].end = AR913X_WMAC_BASE + AR913X_WMAC_SIZE - 1; +} + + +static int ar933x_wmac_reset(void) +{ + ath79_device_reset_clear(AR933X_RESET_WMAC); + ath79_device_reset_set(AR933X_RESET_WMAC); + + return 0; +} + +static int ar933x_r1_get_wmac_revision(void) +{ + return ath79_soc_rev; +} + +static void __init ar933x_wmac_setup(void) +{ + u32 t; + + ar933x_wmac_reset(); + + ath79_wmac_device.name = "ar933x_wmac"; + + ath79_wmac_resources[0].start = AR933X_WMAC_BASE; + ath79_wmac_resources[0].end = AR933X_WMAC_BASE + AR933X_WMAC_SIZE - 1; + + t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP); + if (t & AR933X_BOOTSTRAP_REF_CLK_40) + ath79_wmac_data.is_clk_25mhz = false; + else + ath79_wmac_data.is_clk_25mhz = true; + + if (ath79_soc_rev == 1) + ath79_wmac_data.get_mac_revision = ar933x_r1_get_wmac_revision; + + ath79_wmac_data.external_reset = ar933x_wmac_reset; +} + +void __init ath79_register_wmac(u8 *cal_data) +{ + if (soc_is_ar913x()) + ar913x_wmac_setup(); + if (soc_is_ar933x()) + ar933x_wmac_setup(); + else + BUG(); + + if (cal_data) + memcpy(ath79_wmac_data.eeprom_data, cal_data, + sizeof(ath79_wmac_data.eeprom_data)); + + platform_device_register(&ath79_wmac_device); +} diff --git a/arch/mips/ath79/dev-wmac.h b/arch/mips/ath79/dev-wmac.h new file mode 100644 index 00000000000..c9cd8709f09 --- /dev/null +++ b/arch/mips/ath79/dev-wmac.h @@ -0,0 +1,17 @@ +/* + * Atheros AR913X/AR933X SoC built-in WMAC device support + * + * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _ATH79_DEV_WMAC_H +#define _ATH79_DEV_WMAC_H + +void ath79_register_wmac(u8 *cal_data); + +#endif /* _ATH79_DEV_WMAC_H */ diff --git a/arch/mips/ath79/early_printk.c b/arch/mips/ath79/early_printk.c index 7499b0e9df2..6a51ced7a29 100644 --- a/arch/mips/ath79/early_printk.c +++ b/arch/mips/ath79/early_printk.c @@ -1,7 +1,7 @@ /* - * Atheros AR71XX/AR724X/AR913X SoC early printk support + * Atheros AR7XXX/AR9XXX SoC early printk support * - * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> * * This program is free software; you can redistribute it and/or modify it @@ -10,27 +10,85 @@ */ #include <linux/io.h> +#include <linux/errno.h> #include <linux/serial_reg.h> #include <asm/addrspace.h> +#include <asm/mach-ath79/ath79.h> #include <asm/mach-ath79/ar71xx_regs.h> +#include <asm/mach-ath79/ar933x_uart.h> -static inline void prom_wait_thre(void __iomem *base) +static void (*_prom_putchar) (unsigned char); + +static inline void prom_putchar_wait(void __iomem *reg, u32 mask, u32 val) { - u32 lsr; + u32 t; do { - lsr = __raw_readl(base + UART_LSR * 4); - if (lsr & UART_LSR_THRE) + t = __raw_readl(reg); + if ((t & mask) == val) break; } while (1); } -void prom_putchar(unsigned char ch) +static void prom_putchar_ar71xx(unsigned char ch) { void __iomem *base = (void __iomem *)(KSEG1ADDR(AR71XX_UART_BASE)); - prom_wait_thre(base); + prom_putchar_wait(base + UART_LSR * 4, UART_LSR_THRE, UART_LSR_THRE); __raw_writel(ch, base + UART_TX * 4); - prom_wait_thre(base); + prom_putchar_wait(base + UART_LSR * 4, UART_LSR_THRE, UART_LSR_THRE); +} + +static void prom_putchar_ar933x(unsigned char ch) +{ + void __iomem *base = (void __iomem *)(KSEG1ADDR(AR933X_UART_BASE)); + + prom_putchar_wait(base + AR933X_UART_DATA_REG, AR933X_UART_DATA_TX_CSR, + AR933X_UART_DATA_TX_CSR); + __raw_writel(AR933X_UART_DATA_TX_CSR | ch, base + AR933X_UART_DATA_REG); + prom_putchar_wait(base + AR933X_UART_DATA_REG, AR933X_UART_DATA_TX_CSR, + AR933X_UART_DATA_TX_CSR); +} + +static void prom_putchar_dummy(unsigned char ch) +{ + /* nothing to do */ +} + +static void prom_putchar_init(void) +{ + void __iomem *base; + u32 id; + + base = (void __iomem *)(KSEG1ADDR(AR71XX_RESET_BASE)); + id = __raw_readl(base + AR71XX_RESET_REG_REV_ID); + id &= REV_ID_MAJOR_MASK; + + switch (id) { + case REV_ID_MAJOR_AR71XX: + case REV_ID_MAJOR_AR7240: + case REV_ID_MAJOR_AR7241: + case REV_ID_MAJOR_AR7242: + case REV_ID_MAJOR_AR913X: + _prom_putchar = prom_putchar_ar71xx; + break; + + case REV_ID_MAJOR_AR9330: + case REV_ID_MAJOR_AR9331: + _prom_putchar = prom_putchar_ar933x; + break; + + default: + _prom_putchar = prom_putchar_dummy; + break; + } +} + +void prom_putchar(unsigned char ch) +{ + if (!_prom_putchar) + prom_putchar_init(); + + _prom_putchar(ch); } diff --git a/arch/mips/ath79/gpio.c b/arch/mips/ath79/gpio.c index a0c426b8212..a2f8ca630ed 100644 --- a/arch/mips/ath79/gpio.c +++ b/arch/mips/ath79/gpio.c @@ -153,6 +153,8 @@ void __init ath79_gpio_init(void) ath79_gpio_count = AR724X_GPIO_COUNT; else if (soc_is_ar913x()) ath79_gpio_count = AR913X_GPIO_COUNT; + else if (soc_is_ar933x()) + ath79_gpio_count = AR933X_GPIO_COUNT; else BUG(); diff --git a/arch/mips/ath79/irq.c b/arch/mips/ath79/irq.c index ac610d5fe3b..1b073de4468 100644 --- a/arch/mips/ath79/irq.c +++ b/arch/mips/ath79/irq.c @@ -46,6 +46,15 @@ static void ath79_misc_irq_handler(unsigned int irq, struct irq_desc *desc) else if (pending & MISC_INT_TIMER) generic_handle_irq(ATH79_MISC_IRQ_TIMER); + else if (pending & MISC_INT_TIMER2) + generic_handle_irq(ATH79_MISC_IRQ_TIMER2); + + else if (pending & MISC_INT_TIMER3) + generic_handle_irq(ATH79_MISC_IRQ_TIMER3); + + else if (pending & MISC_INT_TIMER4) + generic_handle_irq(ATH79_MISC_IRQ_TIMER4); + else if (pending & MISC_INT_OHCI) generic_handle_irq(ATH79_MISC_IRQ_OHCI); @@ -58,6 +67,9 @@ static void ath79_misc_irq_handler(unsigned int irq, struct irq_desc *desc) else if (pending & MISC_INT_WDOG) generic_handle_irq(ATH79_MISC_IRQ_WDOG); + else if (pending & MISC_INT_ETHSW) + generic_handle_irq(ATH79_MISC_IRQ_ETHSW); + else spurious_interrupt(); } @@ -117,7 +129,7 @@ static void __init ath79_misc_irq_init(void) if (soc_is_ar71xx() || soc_is_ar913x()) ath79_misc_irq_chip.irq_mask_ack = ar71xx_misc_irq_mask; - else if (soc_is_ar724x()) + else if (soc_is_ar724x() || soc_is_ar933x()) ath79_misc_irq_chip.irq_ack = ar724x_misc_irq_ack; else BUG(); @@ -174,6 +186,9 @@ void __init arch_init_irq(void) } else if (soc_is_ar913x()) { ath79_ip2_flush_reg = AR913X_DDR_REG_FLUSH_WMAC; ath79_ip3_flush_reg = AR913X_DDR_REG_FLUSH_USB; + } else if (soc_is_ar933x()) { + ath79_ip2_flush_reg = AR933X_DDR_REG_FLUSH_WMAC; + ath79_ip3_flush_reg = AR933X_DDR_REG_FLUSH_USB; } else BUG(); diff --git a/arch/mips/ath79/mach-ap121.c b/arch/mips/ath79/mach-ap121.c new file mode 100644 index 00000000000..4c20200d7c7 --- /dev/null +++ b/arch/mips/ath79/mach-ap121.c @@ -0,0 +1,92 @@ +/* + * Atheros AP121 board support + * + * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include "machtypes.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-spi.h" +#include "dev-usb.h" +#include "dev-wmac.h" + +#define AP121_GPIO_LED_WLAN 0 +#define AP121_GPIO_LED_USB 1 + +#define AP121_GPIO_BTN_JUMPSTART 11 +#define AP121_GPIO_BTN_RESET 12 + +#define AP121_KEYS_POLL_INTERVAL 20 /* msecs */ +#define AP121_KEYS_DEBOUNCE_INTERVAL (3 * AP121_KEYS_POLL_INTERVAL) + +#define AP121_CAL_DATA_ADDR 0x1fff1000 + +static struct gpio_led ap121_leds_gpio[] __initdata = { + { + .name = "ap121:green:usb", + .gpio = AP121_GPIO_LED_USB, + .active_low = 0, + }, + { + .name = "ap121:green:wlan", + .gpio = AP121_GPIO_LED_WLAN, + .active_low = 0, + }, +}; + +static struct gpio_keys_button ap121_gpio_keys[] __initdata = { + { + .desc = "jumpstart button", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL, + .gpio = AP121_GPIO_BTN_JUMPSTART, + .active_low = 1, + }, + { + .desc = "reset button", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL, + .gpio = AP121_GPIO_BTN_RESET, + .active_low = 1, + } +}; + +static struct spi_board_info ap121_spi_info[] = { + { + .bus_num = 0, + .chip_select = 0, + .max_speed_hz = 25000000, + .modalias = "mx25l1606e", + } +}; + +static struct ath79_spi_platform_data ap121_spi_data = { + .bus_num = 0, + .num_chipselect = 1, +}; + +static void __init ap121_setup(void) +{ + u8 *cal_data = (u8 *) KSEG1ADDR(AP121_CAL_DATA_ADDR); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(ap121_leds_gpio), + ap121_leds_gpio); + ath79_register_gpio_keys_polled(-1, AP121_KEYS_POLL_INTERVAL, + ARRAY_SIZE(ap121_gpio_keys), + ap121_gpio_keys); + + ath79_register_spi(&ap121_spi_data, ap121_spi_info, + ARRAY_SIZE(ap121_spi_info)); + ath79_register_usb(); + ath79_register_wmac(cal_data); +} + +MIPS_MACHINE(ATH79_MACH_AP121, "AP121", "Atheros AP121 reference board", + ap121_setup); diff --git a/arch/mips/ath79/mach-ap81.c b/arch/mips/ath79/mach-ap81.c index eee4c121deb..abe19836331 100644 --- a/arch/mips/ath79/mach-ap81.c +++ b/arch/mips/ath79/mach-ap81.c @@ -10,10 +10,11 @@ */ #include "machtypes.h" -#include "dev-ar913x-wmac.h" +#include "dev-wmac.h" #include "dev-gpio-buttons.h" #include "dev-leds-gpio.h" #include "dev-spi.h" +#include "dev-usb.h" #define AP81_GPIO_LED_STATUS 1 #define AP81_GPIO_LED_AOSS 3 @@ -91,7 +92,8 @@ static void __init ap81_setup(void) ap81_gpio_keys); ath79_register_spi(&ap81_spi_data, ap81_spi_info, ARRAY_SIZE(ap81_spi_info)); - ath79_register_ar913x_wmac(cal_data); + ath79_register_wmac(cal_data); + ath79_register_usb(); } MIPS_MACHINE(ATH79_MACH_AP81, "AP81", "Atheros AP81 reference board", diff --git a/arch/mips/ath79/mach-pb44.c b/arch/mips/ath79/mach-pb44.c index ec7b7a135d5..fe9701a3229 100644 --- a/arch/mips/ath79/mach-pb44.c +++ b/arch/mips/ath79/mach-pb44.c @@ -18,6 +18,7 @@ #include "dev-gpio-buttons.h" #include "dev-leds-gpio.h" #include "dev-spi.h" +#include "dev-usb.h" #define PB44_GPIO_I2C_SCL 0 #define PB44_GPIO_I2C_SDA 1 @@ -112,6 +113,7 @@ static void __init pb44_init(void) pb44_gpio_keys); ath79_register_spi(&pb44_spi_data, pb44_spi_info, ARRAY_SIZE(pb44_spi_info)); + ath79_register_usb(); } MIPS_MACHINE(ATH79_MACH_PB44, "PB44", "Atheros PB44 reference board", diff --git a/arch/mips/ath79/mach-ubnt-xm.c b/arch/mips/ath79/mach-ubnt-xm.c new file mode 100644 index 00000000000..3c311a53934 --- /dev/null +++ b/arch/mips/ath79/mach-ubnt-xm.c @@ -0,0 +1,119 @@ +/* + * Ubiquiti Networks XM (rev 1.0) board support + * + * Copyright (C) 2011 RenĂ© Bolldorf <xsecute@googlemail.com> + * + * Derived from: mach-pb44.c + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/pci.h> + +#ifdef CONFIG_PCI +#include <linux/ath9k_platform.h> +#include <asm/mach-ath79/pci-ath724x.h> +#endif /* CONFIG_PCI */ + +#include "machtypes.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-spi.h" + +#define UBNT_XM_GPIO_LED_L1 0 +#define UBNT_XM_GPIO_LED_L2 1 +#define UBNT_XM_GPIO_LED_L3 11 +#define UBNT_XM_GPIO_LED_L4 7 + +#define UBNT_XM_GPIO_BTN_RESET 12 + +#define UBNT_XM_KEYS_POLL_INTERVAL 20 +#define UBNT_XM_KEYS_DEBOUNCE_INTERVAL (3 * UBNT_XM_KEYS_POLL_INTERVAL) + +#define UBNT_XM_PCI_IRQ 48 +#define UBNT_XM_EEPROM_ADDR (u8 *) KSEG1ADDR(0x1fff1000) + +static struct gpio_led ubnt_xm_leds_gpio[] __initdata = { + { + .name = "ubnt-xm:red:link1", + .gpio = UBNT_XM_GPIO_LED_L1, + .active_low = 0, + }, { + .name = "ubnt-xm:orange:link2", + .gpio = UBNT_XM_GPIO_LED_L2, + .active_low = 0, + }, { + .name = "ubnt-xm:green:link3", + .gpio = UBNT_XM_GPIO_LED_L3, + .active_low = 0, + }, { + .name = "ubnt-xm:green:link4", + .gpio = UBNT_XM_GPIO_LED_L4, + .active_low = 0, + }, +}; + +static struct gpio_keys_button ubnt_xm_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = UBNT_XM_KEYS_DEBOUNCE_INTERVAL, + .gpio = UBNT_XM_GPIO_BTN_RESET, + .active_low = 1, + } +}; + +static struct spi_board_info ubnt_xm_spi_info[] = { + { + .bus_num = 0, + .chip_select = 0, + .max_speed_hz = 25000000, + .modalias = "mx25l6405d", + } +}; + +static struct ath79_spi_platform_data ubnt_xm_spi_data = { + .bus_num = 0, + .num_chipselect = 1, +}; + +#ifdef CONFIG_PCI +static struct ath9k_platform_data ubnt_xm_eeprom_data; + +static struct ath724x_pci_data ubnt_xm_pci_data[] = { + { + .irq = UBNT_XM_PCI_IRQ, + .pdata = &ubnt_xm_eeprom_data, + }, +}; +#endif /* CONFIG_PCI */ + +static void __init ubnt_xm_init(void) +{ + ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xm_leds_gpio), + ubnt_xm_leds_gpio); + + ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, + ARRAY_SIZE(ubnt_xm_gpio_keys), + ubnt_xm_gpio_keys); + + ath79_register_spi(&ubnt_xm_spi_data, ubnt_xm_spi_info, + ARRAY_SIZE(ubnt_xm_spi_info)); + +#ifdef CONFIG_PCI + memcpy(ubnt_xm_eeprom_data.eeprom_data, UBNT_XM_EEPROM_ADDR, + sizeof(ubnt_xm_eeprom_data.eeprom_data)); + + ath724x_pci_add_data(ubnt_xm_pci_data, ARRAY_SIZE(ubnt_xm_pci_data)); +#endif /* CONFIG_PCI */ + +} + +MIPS_MACHINE(ATH79_MACH_UBNT_XM, + "UBNT-XM", + "Ubiquiti Networks XM (rev 1.0) board", + ubnt_xm_init); diff --git a/arch/mips/ath79/machtypes.h b/arch/mips/ath79/machtypes.h index 3940fe470b2..9a1f3826626 100644 --- a/arch/mips/ath79/machtypes.h +++ b/arch/mips/ath79/machtypes.h @@ -16,8 +16,10 @@ enum ath79_mach_type { ATH79_MACH_GENERIC = 0, + ATH79_MACH_AP121, /* Atheros AP121 reference board */ ATH79_MACH_AP81, /* Atheros AP81 reference board */ ATH79_MACH_PB44, /* Atheros PB44 reference board */ + ATH79_MACH_UBNT_XM, /* Ubiquiti Networks XM board rev 1.0 */ }; #endif /* _ATH79_MACHTYPE_H */ diff --git a/arch/mips/ath79/setup.c b/arch/mips/ath79/setup.c index 159b42f106b..80a7d4023d7 100644 --- a/arch/mips/ath79/setup.c +++ b/arch/mips/ath79/setup.c @@ -101,19 +101,31 @@ static void __init ath79_detect_sys_type(void) case REV_ID_MAJOR_AR7240: ath79_soc = ATH79_SOC_AR7240; chip = "7240"; - rev = (id & AR724X_REV_ID_REVISION_MASK); + rev = id & AR724X_REV_ID_REVISION_MASK; break; case REV_ID_MAJOR_AR7241: ath79_soc = ATH79_SOC_AR7241; chip = "7241"; - rev = (id & AR724X_REV_ID_REVISION_MASK); + rev = id & AR724X_REV_ID_REVISION_MASK; break; case REV_ID_MAJOR_AR7242: ath79_soc = ATH79_SOC_AR7242; chip = "7242"; - rev = (id & AR724X_REV_ID_REVISION_MASK); + rev = id & AR724X_REV_ID_REVISION_MASK; + break; + + case REV_ID_MAJOR_AR9330: + ath79_soc = ATH79_SOC_AR9330; + chip = "9330"; + rev = id & AR933X_REV_ID_REVISION_MASK; + break; + + case REV_ID_MAJOR_AR9331: + ath79_soc = ATH79_SOC_AR9331; + chip = "9331"; + rev = id & AR933X_REV_ID_REVISION_MASK; break; case REV_ID_MAJOR_AR913X: @@ -134,9 +146,11 @@ static void __init ath79_detect_sys_type(void) break; default: - panic("ath79: unknown SoC, id:0x%08x\n", id); + panic("ath79: unknown SoC, id:0x%08x", id); } + ath79_soc_rev = rev; + sprintf(ath79_sys_type, "Atheros AR%s rev %u", chip, rev); pr_info("SoC: %s\n", ath79_sys_type); } diff --git a/arch/mips/bcm47xx/setup.c b/arch/mips/bcm47xx/setup.c index 1cfdda03546..aab6b0c40a7 100644 --- a/arch/mips/bcm47xx/setup.c +++ b/arch/mips/bcm47xx/setup.c @@ -289,7 +289,7 @@ static void __init bcm47xx_register_ssb(void) err = ssb_bus_ssbbus_register(&(bcm47xx_bus.ssb), SSB_ENUM_BASE, bcm47xx_get_invariants); if (err) - panic("Failed to initialize SSB bus (err %d)\n", err); + panic("Failed to initialize SSB bus (err %d)", err); mcore = &bcm47xx_bus.ssb.mipscore; if (nvram_getenv("kernel_args", buf, sizeof(buf)) >= 0) { @@ -314,7 +314,7 @@ static void __init bcm47xx_register_bcma(void) err = bcma_host_soc_register(&bcm47xx_bus.bcma); if (err) - panic("Failed to initialize BCMA bus (err %d)\n", err); + panic("Failed to initialize BCMA bus (err %d)", err); } #endif diff --git a/arch/mips/bcm63xx/Kconfig b/arch/mips/bcm63xx/Kconfig index fb177d6df06..6b1b9ad8d85 100644 --- a/arch/mips/bcm63xx/Kconfig +++ b/arch/mips/bcm63xx/Kconfig @@ -20,6 +20,10 @@ config BCM63XX_CPU_6348 config BCM63XX_CPU_6358 bool "support 6358 CPU" select HW_HAS_PCI + +config BCM63XX_CPU_6368 + bool "support 6368 CPU" + select HW_HAS_PCI endmenu source "arch/mips/bcm63xx/boards/Kconfig" diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c index 40b223b603b..e62461f817d 100644 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c @@ -709,15 +709,9 @@ void __init board_prom_init(void) char cfe_version[32]; u32 val; - /* read base address of boot chip select (0) - * 6345 does not have MPI but boots from standard - * MIPS Flash address */ - if (BCMCPU_IS_6345()) - val = 0x1fc00000; - else { - val = bcm_mpi_readl(MPI_CSBASE_REG(0)); - val &= MPI_CSBASE_BASE_MASK; - } + /* read base address of boot chip select (0) */ + val = bcm_mpi_readl(MPI_CSBASE_REG(0)); + val &= MPI_CSBASE_BASE_MASK; boot_addr = (u8 *)KSEG1ADDR(val); /* dump cfe version */ @@ -797,18 +791,6 @@ void __init board_prom_init(void) } bcm_gpio_writel(val, GPIO_MODE_REG); - - /* Generate MAC address for WLAN and - * register our SPROM */ -#ifdef CONFIG_SSB_PCIHOST - if (!board_get_mac_address(bcm63xx_sprom.il0mac)) { - memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN); - memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN); - if (ssb_arch_register_fallback_sprom( - &bcm63xx_get_fallback_sprom) < 0) - printk(KERN_ERR PFX "failed to register fallback SPROM\n"); - } -#endif } /* @@ -892,13 +874,23 @@ int __init board_register_devices(void) if (board.has_dsp) bcm63xx_dsp_register(&board.dsp); - /* read base address of boot chip select (0) */ - if (BCMCPU_IS_6345()) - val = 0x1fc00000; - else { - val = bcm_mpi_readl(MPI_CSBASE_REG(0)); - val &= MPI_CSBASE_BASE_MASK; + /* Generate MAC address for WLAN and register our SPROM, + * do this after registering enet devices + */ +#ifdef CONFIG_SSB_PCIHOST + if (!board_get_mac_address(bcm63xx_sprom.il0mac)) { + memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN); + memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN); + if (ssb_arch_register_fallback_sprom( + &bcm63xx_get_fallback_sprom) < 0) + pr_err(PFX "failed to register fallback SPROM\n"); } +#endif + + /* read base address of boot chip select (0) */ + val = bcm_mpi_readl(MPI_CSBASE_REG(0)); + val &= MPI_CSBASE_BASE_MASK; + mtd_resources[0].start = val; mtd_resources[0].end = 0x1FFFFFFF; diff --git a/arch/mips/bcm63xx/clk.c b/arch/mips/bcm63xx/clk.c index 2c68ee9ccee..9d57c71b7b5 100644 --- a/arch/mips/bcm63xx/clk.c +++ b/arch/mips/bcm63xx/clk.c @@ -10,6 +10,7 @@ #include <linux/mutex.h> #include <linux/err.h> #include <linux/clk.h> +#include <linux/delay.h> #include <bcm63xx_cpu.h> #include <bcm63xx_io.h> #include <bcm63xx_regs.h> @@ -113,6 +114,34 @@ static struct clk clk_ephy = { }; /* + * Ethernet switch clock + */ +static void enetsw_set(struct clk *clk, int enable) +{ + if (!BCMCPU_IS_6368()) + return; + bcm_hwclock_set(CKCTL_6368_ROBOSW_CLK_EN | + CKCTL_6368_SWPKT_USB_EN | + CKCTL_6368_SWPKT_SAR_EN, enable); + if (enable) { + u32 val; + + /* reset switch core afer clock change */ + val = bcm_perf_readl(PERF_SOFTRESET_6368_REG); + val &= ~SOFTRESET_6368_ENETSW_MASK; + bcm_perf_writel(val, PERF_SOFTRESET_6368_REG); + msleep(10); + val |= SOFTRESET_6368_ENETSW_MASK; + bcm_perf_writel(val, PERF_SOFTRESET_6368_REG); + msleep(10); + } +} + +static struct clk clk_enetsw = { + .set = enetsw_set, +}; + +/* * PCM clock */ static void pcm_set(struct clk *clk, int enable) @@ -131,9 +160,10 @@ static struct clk clk_pcm = { */ static void usbh_set(struct clk *clk, int enable) { - if (!BCMCPU_IS_6348()) - return; - bcm_hwclock_set(CKCTL_6348_USBH_EN, enable); + if (BCMCPU_IS_6348()) + bcm_hwclock_set(CKCTL_6348_USBH_EN, enable); + else if (BCMCPU_IS_6368()) + bcm_hwclock_set(CKCTL_6368_USBH_CLK_EN, enable); } static struct clk clk_usbh = { @@ -162,6 +192,36 @@ static struct clk clk_spi = { }; /* + * XTM clock + */ +static void xtm_set(struct clk *clk, int enable) +{ + if (!BCMCPU_IS_6368()) + return; + + bcm_hwclock_set(CKCTL_6368_SAR_CLK_EN | + CKCTL_6368_SWPKT_SAR_EN, enable); + + if (enable) { + u32 val; + + /* reset sar core afer clock change */ + val = bcm_perf_readl(PERF_SOFTRESET_6368_REG); + val &= ~SOFTRESET_6368_SAR_MASK; + bcm_perf_writel(val, PERF_SOFTRESET_6368_REG); + mdelay(1); + val |= SOFTRESET_6368_SAR_MASK; + bcm_perf_writel(val, PERF_SOFTRESET_6368_REG); + mdelay(1); + } +} + + +static struct clk clk_xtm = { + .set = xtm_set, +}; + +/* * Internal peripheral clock */ static struct clk clk_periph = { @@ -204,12 +264,16 @@ struct clk *clk_get(struct device *dev, const char *id) return &clk_enet0; if (!strcmp(id, "enet1")) return &clk_enet1; + if (!strcmp(id, "enetsw")) + return &clk_enetsw; if (!strcmp(id, "ephy")) return &clk_ephy; if (!strcmp(id, "usbh")) return &clk_usbh; if (!strcmp(id, "spi")) return &clk_spi; + if (!strcmp(id, "xtm")) + return &clk_xtm; if (!strcmp(id, "periph")) return &clk_periph; if (BCMCPU_IS_6358() && !strcmp(id, "pcm")) diff --git a/arch/mips/bcm63xx/cpu.c b/arch/mips/bcm63xx/cpu.c index 7c7e4d4486c..8f0d6c7725e 100644 --- a/arch/mips/bcm63xx/cpu.c +++ b/arch/mips/bcm63xx/cpu.c @@ -29,166 +29,47 @@ static u16 bcm63xx_cpu_rev; static unsigned int bcm63xx_cpu_freq; static unsigned int bcm63xx_memory_size; -/* - * 6338 register sets and irqs - */ -static const unsigned long bcm96338_regs_base[] = { - [RSET_DSL_LMEM] = BCM_6338_DSL_LMEM_BASE, - [RSET_PERF] = BCM_6338_PERF_BASE, - [RSET_TIMER] = BCM_6338_TIMER_BASE, - [RSET_WDT] = BCM_6338_WDT_BASE, - [RSET_UART0] = BCM_6338_UART0_BASE, - [RSET_UART1] = BCM_6338_UART1_BASE, - [RSET_GPIO] = BCM_6338_GPIO_BASE, - [RSET_SPI] = BCM_6338_SPI_BASE, - [RSET_OHCI0] = BCM_6338_OHCI0_BASE, - [RSET_OHCI_PRIV] = BCM_6338_OHCI_PRIV_BASE, - [RSET_USBH_PRIV] = BCM_6338_USBH_PRIV_BASE, - [RSET_UDC0] = BCM_6338_UDC0_BASE, - [RSET_MPI] = BCM_6338_MPI_BASE, - [RSET_PCMCIA] = BCM_6338_PCMCIA_BASE, - [RSET_SDRAM] = BCM_6338_SDRAM_BASE, - [RSET_DSL] = BCM_6338_DSL_BASE, - [RSET_ENET0] = BCM_6338_ENET0_BASE, - [RSET_ENET1] = BCM_6338_ENET1_BASE, - [RSET_ENETDMA] = BCM_6338_ENETDMA_BASE, - [RSET_MEMC] = BCM_6338_MEMC_BASE, - [RSET_DDR] = BCM_6338_DDR_BASE, +static const unsigned long bcm6338_regs_base[] = { + __GEN_CPU_REGS_TABLE(6338) }; -static const int bcm96338_irqs[] = { - [IRQ_TIMER] = BCM_6338_TIMER_IRQ, - [IRQ_UART0] = BCM_6338_UART0_IRQ, - [IRQ_DSL] = BCM_6338_DSL_IRQ, - [IRQ_ENET0] = BCM_6338_ENET0_IRQ, - [IRQ_ENET_PHY] = BCM_6338_ENET_PHY_IRQ, - [IRQ_ENET0_RXDMA] = BCM_6338_ENET0_RXDMA_IRQ, - [IRQ_ENET0_TXDMA] = BCM_6338_ENET0_TXDMA_IRQ, +static const int bcm6338_irqs[] = { + __GEN_CPU_IRQ_TABLE(6338) }; -/* - * 6345 register sets and irqs - */ -static const unsigned long bcm96345_regs_base[] = { - [RSET_DSL_LMEM] = BCM_6345_DSL_LMEM_BASE, - [RSET_PERF] = BCM_6345_PERF_BASE, - [RSET_TIMER] = BCM_6345_TIMER_BASE, - [RSET_WDT] = BCM_6345_WDT_BASE, - [RSET_UART0] = BCM_6345_UART0_BASE, - [RSET_UART1] = BCM_6345_UART1_BASE, - [RSET_GPIO] = BCM_6345_GPIO_BASE, - [RSET_SPI] = BCM_6345_SPI_BASE, - [RSET_UDC0] = BCM_6345_UDC0_BASE, - [RSET_OHCI0] = BCM_6345_OHCI0_BASE, - [RSET_OHCI_PRIV] = BCM_6345_OHCI_PRIV_BASE, - [RSET_USBH_PRIV] = BCM_6345_USBH_PRIV_BASE, - [RSET_MPI] = BCM_6345_MPI_BASE, - [RSET_PCMCIA] = BCM_6345_PCMCIA_BASE, - [RSET_DSL] = BCM_6345_DSL_BASE, - [RSET_ENET0] = BCM_6345_ENET0_BASE, - [RSET_ENET1] = BCM_6345_ENET1_BASE, - [RSET_ENETDMA] = BCM_6345_ENETDMA_BASE, - [RSET_EHCI0] = BCM_6345_EHCI0_BASE, - [RSET_SDRAM] = BCM_6345_SDRAM_BASE, - [RSET_MEMC] = BCM_6345_MEMC_BASE, - [RSET_DDR] = BCM_6345_DDR_BASE, +static const unsigned long bcm6345_regs_base[] = { + __GEN_CPU_REGS_TABLE(6345) }; -static const int bcm96345_irqs[] = { - [IRQ_TIMER] = BCM_6345_TIMER_IRQ, - [IRQ_UART0] = BCM_6345_UART0_IRQ, - [IRQ_DSL] = BCM_6345_DSL_IRQ, - [IRQ_ENET0] = BCM_6345_ENET0_IRQ, - [IRQ_ENET_PHY] = BCM_6345_ENET_PHY_IRQ, - [IRQ_ENET0_RXDMA] = BCM_6345_ENET0_RXDMA_IRQ, - [IRQ_ENET0_TXDMA] = BCM_6345_ENET0_TXDMA_IRQ, +static const int bcm6345_irqs[] = { + __GEN_CPU_IRQ_TABLE(6345) }; -/* - * 6348 register sets and irqs - */ -static const unsigned long bcm96348_regs_base[] = { - [RSET_DSL_LMEM] = BCM_6348_DSL_LMEM_BASE, - [RSET_PERF] = BCM_6348_PERF_BASE, - [RSET_TIMER] = BCM_6348_TIMER_BASE, - [RSET_WDT] = BCM_6348_WDT_BASE, - [RSET_UART0] = BCM_6348_UART0_BASE, - [RSET_UART1] = BCM_6348_UART1_BASE, - [RSET_GPIO] = BCM_6348_GPIO_BASE, - [RSET_SPI] = BCM_6348_SPI_BASE, - [RSET_OHCI0] = BCM_6348_OHCI0_BASE, - [RSET_OHCI_PRIV] = BCM_6348_OHCI_PRIV_BASE, - [RSET_USBH_PRIV] = BCM_6348_USBH_PRIV_BASE, - [RSET_MPI] = BCM_6348_MPI_BASE, - [RSET_PCMCIA] = BCM_6348_PCMCIA_BASE, - [RSET_SDRAM] = BCM_6348_SDRAM_BASE, - [RSET_DSL] = BCM_6348_DSL_BASE, - [RSET_ENET0] = BCM_6348_ENET0_BASE, - [RSET_ENET1] = BCM_6348_ENET1_BASE, - [RSET_ENETDMA] = BCM_6348_ENETDMA_BASE, - [RSET_MEMC] = BCM_6348_MEMC_BASE, - [RSET_DDR] = BCM_6348_DDR_BASE, +static const unsigned long bcm6348_regs_base[] = { + __GEN_CPU_REGS_TABLE(6348) }; -static const int bcm96348_irqs[] = { - [IRQ_TIMER] = BCM_6348_TIMER_IRQ, - [IRQ_UART0] = BCM_6348_UART0_IRQ, - [IRQ_DSL] = BCM_6348_DSL_IRQ, - [IRQ_ENET0] = BCM_6348_ENET0_IRQ, - [IRQ_ENET1] = BCM_6348_ENET1_IRQ, - [IRQ_ENET_PHY] = BCM_6348_ENET_PHY_IRQ, - [IRQ_OHCI0] = BCM_6348_OHCI0_IRQ, - [IRQ_PCMCIA] = BCM_6348_PCMCIA_IRQ, - [IRQ_ENET0_RXDMA] = BCM_6348_ENET0_RXDMA_IRQ, - [IRQ_ENET0_TXDMA] = BCM_6348_ENET0_TXDMA_IRQ, - [IRQ_ENET1_RXDMA] = BCM_6348_ENET1_RXDMA_IRQ, - [IRQ_ENET1_TXDMA] = BCM_6348_ENET1_TXDMA_IRQ, - [IRQ_PCI] = BCM_6348_PCI_IRQ, +static const int bcm6348_irqs[] = { + __GEN_CPU_IRQ_TABLE(6348) + }; -/* - * 6358 register sets and irqs - */ -static const unsigned long bcm96358_regs_base[] = { - [RSET_DSL_LMEM] = BCM_6358_DSL_LMEM_BASE, - [RSET_PERF] = BCM_6358_PERF_BASE, - [RSET_TIMER] = BCM_6358_TIMER_BASE, - [RSET_WDT] = BCM_6358_WDT_BASE, - [RSET_UART0] = BCM_6358_UART0_BASE, - [RSET_UART1] = BCM_6358_UART1_BASE, - [RSET_GPIO] = BCM_6358_GPIO_BASE, - [RSET_SPI] = BCM_6358_SPI_BASE, - [RSET_OHCI0] = BCM_6358_OHCI0_BASE, - [RSET_EHCI0] = BCM_6358_EHCI0_BASE, - [RSET_OHCI_PRIV] = BCM_6358_OHCI_PRIV_BASE, - [RSET_USBH_PRIV] = BCM_6358_USBH_PRIV_BASE, - [RSET_MPI] = BCM_6358_MPI_BASE, - [RSET_PCMCIA] = BCM_6358_PCMCIA_BASE, - [RSET_SDRAM] = BCM_6358_SDRAM_BASE, - [RSET_DSL] = BCM_6358_DSL_BASE, - [RSET_ENET0] = BCM_6358_ENET0_BASE, - [RSET_ENET1] = BCM_6358_ENET1_BASE, - [RSET_ENETDMA] = BCM_6358_ENETDMA_BASE, - [RSET_MEMC] = BCM_6358_MEMC_BASE, - [RSET_DDR] = BCM_6358_DDR_BASE, +static const unsigned long bcm6358_regs_base[] = { + __GEN_CPU_REGS_TABLE(6358) +}; + +static const int bcm6358_irqs[] = { + __GEN_CPU_IRQ_TABLE(6358) + }; -static const int bcm96358_irqs[] = { - [IRQ_TIMER] = BCM_6358_TIMER_IRQ, - [IRQ_UART0] = BCM_6358_UART0_IRQ, - [IRQ_UART1] = BCM_6358_UART1_IRQ, - [IRQ_DSL] = BCM_6358_DSL_IRQ, - [IRQ_ENET0] = BCM_6358_ENET0_IRQ, - [IRQ_ENET1] = BCM_6358_ENET1_IRQ, - [IRQ_ENET_PHY] = BCM_6358_ENET_PHY_IRQ, - [IRQ_OHCI0] = BCM_6358_OHCI0_IRQ, - [IRQ_EHCI0] = BCM_6358_EHCI0_IRQ, - [IRQ_PCMCIA] = BCM_6358_PCMCIA_IRQ, - [IRQ_ENET0_RXDMA] = BCM_6358_ENET0_RXDMA_IRQ, - [IRQ_ENET0_TXDMA] = BCM_6358_ENET0_TXDMA_IRQ, - [IRQ_ENET1_RXDMA] = BCM_6358_ENET1_RXDMA_IRQ, - [IRQ_ENET1_TXDMA] = BCM_6358_ENET1_TXDMA_IRQ, - [IRQ_PCI] = BCM_6358_PCI_IRQ, +static const unsigned long bcm6368_regs_base[] = { + __GEN_CPU_REGS_TABLE(6368) +}; + +static const int bcm6368_irqs[] = { + __GEN_CPU_IRQ_TABLE(6368) + }; u16 __bcm63xx_get_cpu_id(void) @@ -217,20 +98,19 @@ unsigned int bcm63xx_get_memory_size(void) static unsigned int detect_cpu_clock(void) { - unsigned int tmp, n1 = 0, n2 = 0, m1 = 0; - - /* BCM6338 has a fixed 240 Mhz frequency */ - if (BCMCPU_IS_6338()) + switch (bcm63xx_get_cpu_id()) { + case BCM6338_CPU_ID: + /* BCM6338 has a fixed 240 Mhz frequency */ return 240000000; - /* BCM6345 has a fixed 140Mhz frequency */ - if (BCMCPU_IS_6345()) + case BCM6345_CPU_ID: + /* BCM6345 has a fixed 140Mhz frequency */ return 140000000; - /* - * frequency depends on PLL configuration: - */ - if (BCMCPU_IS_6348()) { + case BCM6348_CPU_ID: + { + unsigned int tmp, n1, n2, m1; + /* 16MHz * (N1 + 1) * (N2 + 2) / (M1_CPU + 1) */ tmp = bcm_perf_readl(PERF_MIPSPLLCTL_REG); n1 = (tmp & MIPSPLLCTL_N1_MASK) >> MIPSPLLCTL_N1_SHIFT; @@ -239,17 +119,47 @@ static unsigned int detect_cpu_clock(void) n1 += 1; n2 += 2; m1 += 1; + return (16 * 1000000 * n1 * n2) / m1; } - if (BCMCPU_IS_6358()) { + case BCM6358_CPU_ID: + { + unsigned int tmp, n1, n2, m1; + /* 16MHz * N1 * N2 / M1_CPU */ tmp = bcm_ddr_readl(DDR_DMIPSPLLCFG_REG); n1 = (tmp & DMIPSPLLCFG_N1_MASK) >> DMIPSPLLCFG_N1_SHIFT; n2 = (tmp & DMIPSPLLCFG_N2_MASK) >> DMIPSPLLCFG_N2_SHIFT; m1 = (tmp & DMIPSPLLCFG_M1_MASK) >> DMIPSPLLCFG_M1_SHIFT; + return (16 * 1000000 * n1 * n2) / m1; } - return (16 * 1000000 * n1 * n2) / m1; + case BCM6368_CPU_ID: + { + unsigned int tmp, p1, p2, ndiv, m1; + + /* (64MHz / P1) * P2 * NDIV / M1_CPU */ + tmp = bcm_ddr_readl(DDR_DMIPSPLLCFG_6368_REG); + + p1 = (tmp & DMIPSPLLCFG_6368_P1_MASK) >> + DMIPSPLLCFG_6368_P1_SHIFT; + + p2 = (tmp & DMIPSPLLCFG_6368_P2_MASK) >> + DMIPSPLLCFG_6368_P2_SHIFT; + + ndiv = (tmp & DMIPSPLLCFG_6368_NDIV_MASK) >> + DMIPSPLLCFG_6368_NDIV_SHIFT; + + tmp = bcm_ddr_readl(DDR_DMIPSPLLDIV_6368_REG); + m1 = (tmp & DMIPSPLLDIV_6368_MDIV_MASK) >> + DMIPSPLLDIV_6368_MDIV_SHIFT; + + return (((64 * 1000000) / p1) * p2 * ndiv) / m1; + } + + default: + BUG(); + } } /* @@ -260,8 +170,10 @@ static unsigned int detect_memory_size(void) unsigned int cols = 0, rows = 0, is_32bits = 0, banks = 0; u32 val; - if (BCMCPU_IS_6345()) - return (8 * 1024 * 1024); + if (BCMCPU_IS_6345()) { + val = bcm_sdram_readl(SDRAM_MBASE_REG); + return (val * 8 * 1024 * 1024); + } if (BCMCPU_IS_6338() || BCMCPU_IS_6348()) { val = bcm_sdram_readl(SDRAM_CFG_REG); @@ -271,7 +183,7 @@ static unsigned int detect_memory_size(void) banks = (val & SDRAM_CFG_BANK_MASK) ? 2 : 1; } - if (BCMCPU_IS_6358()) { + if (BCMCPU_IS_6358() || BCMCPU_IS_6368()) { val = bcm_memc_readl(MEMC_CFG_REG); rows = (val & MEMC_CFG_ROW_MASK) >> MEMC_CFG_ROW_SHIFT; cols = (val & MEMC_CFG_COL_MASK) >> MEMC_CFG_COL_SHIFT; @@ -301,24 +213,33 @@ void __init bcm63xx_cpu_init(void) case CPU_BMIPS3300: if ((read_c0_prid() & 0xff00) == PRID_IMP_BMIPS3300_ALT) { expected_cpu_id = BCM6348_CPU_ID; - bcm63xx_regs_base = bcm96348_regs_base; - bcm63xx_irqs = bcm96348_irqs; + bcm63xx_regs_base = bcm6348_regs_base; + bcm63xx_irqs = bcm6348_irqs; } else { __cpu_name[cpu] = "Broadcom BCM6338"; expected_cpu_id = BCM6338_CPU_ID; - bcm63xx_regs_base = bcm96338_regs_base; - bcm63xx_irqs = bcm96338_irqs; + bcm63xx_regs_base = bcm6338_regs_base; + bcm63xx_irqs = bcm6338_irqs; } break; case CPU_BMIPS32: expected_cpu_id = BCM6345_CPU_ID; - bcm63xx_regs_base = bcm96345_regs_base; - bcm63xx_irqs = bcm96345_irqs; + bcm63xx_regs_base = bcm6345_regs_base; + bcm63xx_irqs = bcm6345_irqs; break; case CPU_BMIPS4350: - expected_cpu_id = BCM6358_CPU_ID; - bcm63xx_regs_base = bcm96358_regs_base; - bcm63xx_irqs = bcm96358_irqs; + switch (read_c0_prid() & 0xf0) { + case 0x10: + expected_cpu_id = BCM6358_CPU_ID; + bcm63xx_regs_base = bcm6358_regs_base; + bcm63xx_irqs = bcm6358_irqs; + break; + case 0x30: + expected_cpu_id = BCM6368_CPU_ID; + bcm63xx_regs_base = bcm6368_regs_base; + bcm63xx_irqs = bcm6368_irqs; + break; + } break; } diff --git a/arch/mips/bcm63xx/dev-uart.c b/arch/mips/bcm63xx/dev-uart.c index c2963da0253..d6e42c60832 100644 --- a/arch/mips/bcm63xx/dev-uart.c +++ b/arch/mips/bcm63xx/dev-uart.c @@ -54,7 +54,7 @@ int __init bcm63xx_uart_register(unsigned int id) if (id >= ARRAY_SIZE(bcm63xx_uart_devices)) return -ENODEV; - if (id == 1 && !BCMCPU_IS_6358()) + if (id == 1 && (!BCMCPU_IS_6358() && !BCMCPU_IS_6368())) return -ENODEV; if (id == 0) { diff --git a/arch/mips/bcm63xx/gpio.c b/arch/mips/bcm63xx/gpio.c index f560fe7d38d..a6c2135dbf3 100644 --- a/arch/mips/bcm63xx/gpio.c +++ b/arch/mips/bcm63xx/gpio.c @@ -4,7 +4,7 @@ * for more details. * * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> - * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org> + * Copyright (C) 2008-2011 Florian Fainelli <florian@openwrt.org> */ #include <linux/kernel.h> @@ -18,6 +18,34 @@ #include <bcm63xx_io.h> #include <bcm63xx_regs.h> +#ifndef BCMCPU_RUNTIME_DETECT +#define gpio_out_low_reg GPIO_DATA_LO_REG +#ifdef CONFIG_BCM63XX_CPU_6345 +#ifdef gpio_out_low_reg +#undef gpio_out_low_reg +#define gpio_out_low_reg GPIO_DATA_LO_REG_6345 +#endif /* gpio_out_low_reg */ +#endif /* CONFIG_BCM63XX_CPU_6345 */ + +static inline void bcm63xx_gpio_out_low_reg_init(void) +{ +} +#else /* ! BCMCPU_RUNTIME_DETECT */ +static u32 gpio_out_low_reg; + +static void bcm63xx_gpio_out_low_reg_init(void) +{ + switch (bcm63xx_get_cpu_id()) { + case BCM6345_CPU_ID: + gpio_out_low_reg = GPIO_DATA_LO_REG_6345; + break; + default: + gpio_out_low_reg = GPIO_DATA_LO_REG; + break; + } +} +#endif /* ! BCMCPU_RUNTIME_DETECT */ + static DEFINE_SPINLOCK(bcm63xx_gpio_lock); static u32 gpio_out_low, gpio_out_high; @@ -33,7 +61,7 @@ static void bcm63xx_gpio_set(struct gpio_chip *chip, BUG(); if (gpio < 32) { - reg = GPIO_DATA_LO_REG; + reg = gpio_out_low_reg; mask = 1 << gpio; v = &gpio_out_low; } else { @@ -60,7 +88,7 @@ static int bcm63xx_gpio_get(struct gpio_chip *chip, unsigned gpio) BUG(); if (gpio < 32) { - reg = GPIO_DATA_LO_REG; + reg = gpio_out_low_reg; mask = 1 << gpio; } else { reg = GPIO_DATA_HI_REG; @@ -125,8 +153,11 @@ static struct gpio_chip bcm63xx_gpio_chip = { int __init bcm63xx_gpio_init(void) { - gpio_out_low = bcm_gpio_readl(GPIO_DATA_LO_REG); - gpio_out_high = bcm_gpio_readl(GPIO_DATA_HI_REG); + bcm63xx_gpio_out_low_reg_init(); + + gpio_out_low = bcm_gpio_readl(gpio_out_low_reg); + if (!BCMCPU_IS_6345()) + gpio_out_high = bcm_gpio_readl(GPIO_DATA_HI_REG); bcm63xx_gpio_chip.ngpio = bcm63xx_gpio_count(); pr_info("registering %d GPIOs\n", bcm63xx_gpio_chip.ngpio); diff --git a/arch/mips/bcm63xx/irq.c b/arch/mips/bcm63xx/irq.c index 162e11b4ed7..9a216a451d9 100644 --- a/arch/mips/bcm63xx/irq.c +++ b/arch/mips/bcm63xx/irq.c @@ -19,19 +19,187 @@ #include <bcm63xx_io.h> #include <bcm63xx_irq.h> +static void __dispatch_internal(void) __maybe_unused; +static void __dispatch_internal_64(void) __maybe_unused; +static void __internal_irq_mask_32(unsigned int irq) __maybe_unused; +static void __internal_irq_mask_64(unsigned int irq) __maybe_unused; +static void __internal_irq_unmask_32(unsigned int irq) __maybe_unused; +static void __internal_irq_unmask_64(unsigned int irq) __maybe_unused; + +#ifndef BCMCPU_RUNTIME_DETECT +#ifdef CONFIG_BCM63XX_CPU_6338 +#define irq_stat_reg PERF_IRQSTAT_6338_REG +#define irq_mask_reg PERF_IRQMASK_6338_REG +#define irq_bits 32 +#define is_ext_irq_cascaded 0 +#define ext_irq_start 0 +#define ext_irq_end 0 +#define ext_irq_count 4 +#define ext_irq_cfg_reg1 PERF_EXTIRQ_CFG_REG_6338 +#define ext_irq_cfg_reg2 0 +#endif +#ifdef CONFIG_BCM63XX_CPU_6345 +#define irq_stat_reg PERF_IRQSTAT_6345_REG +#define irq_mask_reg PERF_IRQMASK_6345_REG +#define irq_bits 32 +#define is_ext_irq_cascaded 0 +#define ext_irq_start 0 +#define ext_irq_end 0 +#define ext_irq_count 0 +#define ext_irq_cfg_reg1 0 +#define ext_irq_cfg_reg2 0 +#endif +#ifdef CONFIG_BCM63XX_CPU_6348 +#define irq_stat_reg PERF_IRQSTAT_6348_REG +#define irq_mask_reg PERF_IRQMASK_6348_REG +#define irq_bits 32 +#define is_ext_irq_cascaded 0 +#define ext_irq_start 0 +#define ext_irq_end 0 +#define ext_irq_count 4 +#define ext_irq_cfg_reg1 PERF_EXTIRQ_CFG_REG_6348 +#define ext_irq_cfg_reg2 0 +#endif +#ifdef CONFIG_BCM63XX_CPU_6358 +#define irq_stat_reg PERF_IRQSTAT_6358_REG +#define irq_mask_reg PERF_IRQMASK_6358_REG +#define irq_bits 32 +#define is_ext_irq_cascaded 1 +#define ext_irq_start (BCM_6358_EXT_IRQ0 - IRQ_INTERNAL_BASE) +#define ext_irq_end (BCM_6358_EXT_IRQ3 - IRQ_INTERNAL_BASE) +#define ext_irq_count 4 +#define ext_irq_cfg_reg1 PERF_EXTIRQ_CFG_REG_6358 +#define ext_irq_cfg_reg2 0 +#endif +#ifdef CONFIG_BCM63XX_CPU_6368 +#define irq_stat_reg PERF_IRQSTAT_6368_REG +#define irq_mask_reg PERF_IRQMASK_6368_REG +#define irq_bits 64 +#define is_ext_irq_cascaded 1 +#define ext_irq_start (BCM_6368_EXT_IRQ0 - IRQ_INTERNAL_BASE) +#define ext_irq_end (BCM_6368_EXT_IRQ5 - IRQ_INTERNAL_BASE) +#define ext_irq_count 6 +#define ext_irq_cfg_reg1 PERF_EXTIRQ_CFG_REG_6368 +#define ext_irq_cfg_reg2 PERF_EXTIRQ_CFG_REG2_6368 +#endif + +#if irq_bits == 32 +#define dispatch_internal __dispatch_internal +#define internal_irq_mask __internal_irq_mask_32 +#define internal_irq_unmask __internal_irq_unmask_32 +#else +#define dispatch_internal __dispatch_internal_64 +#define internal_irq_mask __internal_irq_mask_64 +#define internal_irq_unmask __internal_irq_unmask_64 +#endif + +#define irq_stat_addr (bcm63xx_regset_address(RSET_PERF) + irq_stat_reg) +#define irq_mask_addr (bcm63xx_regset_address(RSET_PERF) + irq_mask_reg) + +static inline void bcm63xx_init_irq(void) +{ +} +#else /* ! BCMCPU_RUNTIME_DETECT */ + +static u32 irq_stat_addr, irq_mask_addr; +static void (*dispatch_internal)(void); +static int is_ext_irq_cascaded; +static unsigned int ext_irq_count; +static unsigned int ext_irq_start, ext_irq_end; +static unsigned int ext_irq_cfg_reg1, ext_irq_cfg_reg2; +static void (*internal_irq_mask)(unsigned int irq); +static void (*internal_irq_unmask)(unsigned int irq); + +static void bcm63xx_init_irq(void) +{ + int irq_bits; + + irq_stat_addr = bcm63xx_regset_address(RSET_PERF); + irq_mask_addr = bcm63xx_regset_address(RSET_PERF); + + switch (bcm63xx_get_cpu_id()) { + case BCM6338_CPU_ID: + irq_stat_addr += PERF_IRQSTAT_6338_REG; + irq_mask_addr += PERF_IRQMASK_6338_REG; + irq_bits = 32; + break; + case BCM6345_CPU_ID: + irq_stat_addr += PERF_IRQSTAT_6345_REG; + irq_mask_addr += PERF_IRQMASK_6345_REG; + irq_bits = 32; + break; + case BCM6348_CPU_ID: + irq_stat_addr += PERF_IRQSTAT_6348_REG; + irq_mask_addr += PERF_IRQMASK_6348_REG; + irq_bits = 32; + ext_irq_count = 4; + ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6348; + break; + case BCM6358_CPU_ID: + irq_stat_addr += PERF_IRQSTAT_6358_REG; + irq_mask_addr += PERF_IRQMASK_6358_REG; + irq_bits = 32; + ext_irq_count = 4; + is_ext_irq_cascaded = 1; + ext_irq_start = BCM_6358_EXT_IRQ0 - IRQ_INTERNAL_BASE; + ext_irq_end = BCM_6358_EXT_IRQ3 - IRQ_INTERNAL_BASE; + ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6358; + break; + case BCM6368_CPU_ID: + irq_stat_addr += PERF_IRQSTAT_6368_REG; + irq_mask_addr += PERF_IRQMASK_6368_REG; + irq_bits = 64; + ext_irq_count = 6; + is_ext_irq_cascaded = 1; + ext_irq_start = BCM_6368_EXT_IRQ0 - IRQ_INTERNAL_BASE; + ext_irq_end = BCM_6368_EXT_IRQ5 - IRQ_INTERNAL_BASE; + ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6368; + ext_irq_cfg_reg2 = PERF_EXTIRQ_CFG_REG2_6368; + break; + default: + BUG(); + } + + if (irq_bits == 32) { + dispatch_internal = __dispatch_internal; + internal_irq_mask = __internal_irq_mask_32; + internal_irq_unmask = __internal_irq_unmask_32; + } else { + dispatch_internal = __dispatch_internal_64; + internal_irq_mask = __internal_irq_mask_64; + internal_irq_unmask = __internal_irq_unmask_64; + } +} +#endif /* ! BCMCPU_RUNTIME_DETECT */ + +static inline u32 get_ext_irq_perf_reg(int irq) +{ + if (irq < 4) + return ext_irq_cfg_reg1; + return ext_irq_cfg_reg2; +} + +static inline void handle_internal(int intbit) +{ + if (is_ext_irq_cascaded && + intbit >= ext_irq_start && intbit <= ext_irq_end) + do_IRQ(intbit - ext_irq_start + IRQ_EXTERNAL_BASE); + else + do_IRQ(intbit + IRQ_INTERNAL_BASE); +} + /* * dispatch internal devices IRQ (uart, enet, watchdog, ...). do not * prioritize any interrupt relatively to another. the static counter * will resume the loop where it ended the last time we left this * function. */ -static void bcm63xx_irq_dispatch_internal(void) +static void __dispatch_internal(void) { u32 pending; static int i; - pending = bcm_perf_readl(PERF_IRQMASK_REG) & - bcm_perf_readl(PERF_IRQSTAT_REG); + pending = bcm_readl(irq_stat_addr) & bcm_readl(irq_mask_addr); if (!pending) return ; @@ -41,7 +209,28 @@ static void bcm63xx_irq_dispatch_internal(void) i = (i + 1) & 0x1f; if (pending & (1 << to_call)) { - do_IRQ(to_call + IRQ_INTERNAL_BASE); + handle_internal(to_call); + break; + } + } +} + +static void __dispatch_internal_64(void) +{ + u64 pending; + static int i; + + pending = bcm_readq(irq_stat_addr) & bcm_readq(irq_mask_addr); + + if (!pending) + return ; + + while (1) { + int to_call = i; + + i = (i + 1) & 0x3f; + if (pending & (1ull << to_call)) { + handle_internal(to_call); break; } } @@ -60,15 +249,17 @@ asmlinkage void plat_irq_dispatch(void) if (cause & CAUSEF_IP7) do_IRQ(7); if (cause & CAUSEF_IP2) - bcm63xx_irq_dispatch_internal(); - if (cause & CAUSEF_IP3) - do_IRQ(IRQ_EXT_0); - if (cause & CAUSEF_IP4) - do_IRQ(IRQ_EXT_1); - if (cause & CAUSEF_IP5) - do_IRQ(IRQ_EXT_2); - if (cause & CAUSEF_IP6) - do_IRQ(IRQ_EXT_3); + dispatch_internal(); + if (!is_ext_irq_cascaded) { + if (cause & CAUSEF_IP3) + do_IRQ(IRQ_EXT_0); + if (cause & CAUSEF_IP4) + do_IRQ(IRQ_EXT_1); + if (cause & CAUSEF_IP5) + do_IRQ(IRQ_EXT_2); + if (cause & CAUSEF_IP6) + do_IRQ(IRQ_EXT_3); + } } while (1); } @@ -76,24 +267,50 @@ asmlinkage void plat_irq_dispatch(void) * internal IRQs operations: only mask/unmask on PERF irq mask * register. */ -static inline void bcm63xx_internal_irq_mask(struct irq_data *d) +static void __internal_irq_mask_32(unsigned int irq) { - unsigned int irq = d->irq - IRQ_INTERNAL_BASE; u32 mask; - mask = bcm_perf_readl(PERF_IRQMASK_REG); + mask = bcm_readl(irq_mask_addr); mask &= ~(1 << irq); - bcm_perf_writel(mask, PERF_IRQMASK_REG); + bcm_writel(mask, irq_mask_addr); } -static void bcm63xx_internal_irq_unmask(struct irq_data *d) +static void __internal_irq_mask_64(unsigned int irq) +{ + u64 mask; + + mask = bcm_readq(irq_mask_addr); + mask &= ~(1ull << irq); + bcm_writeq(mask, irq_mask_addr); +} + +static void __internal_irq_unmask_32(unsigned int irq) { - unsigned int irq = d->irq - IRQ_INTERNAL_BASE; u32 mask; - mask = bcm_perf_readl(PERF_IRQMASK_REG); + mask = bcm_readl(irq_mask_addr); mask |= (1 << irq); - bcm_perf_writel(mask, PERF_IRQMASK_REG); + bcm_writel(mask, irq_mask_addr); +} + +static void __internal_irq_unmask_64(unsigned int irq) +{ + u64 mask; + + mask = bcm_readq(irq_mask_addr); + mask |= (1ull << irq); + bcm_writeq(mask, irq_mask_addr); +} + +static void bcm63xx_internal_irq_mask(struct irq_data *d) +{ + internal_irq_mask(d->irq - IRQ_INTERNAL_BASE); +} + +static void bcm63xx_internal_irq_unmask(struct irq_data *d) +{ + internal_irq_unmask(d->irq - IRQ_INTERNAL_BASE); } /* @@ -102,94 +319,131 @@ static void bcm63xx_internal_irq_unmask(struct irq_data *d) */ static void bcm63xx_external_irq_mask(struct irq_data *d) { - unsigned int irq = d->irq - IRQ_EXT_BASE; - u32 reg; + unsigned int irq = d->irq - IRQ_EXTERNAL_BASE; + u32 reg, regaddr; - reg = bcm_perf_readl(PERF_EXTIRQ_CFG_REG); - reg &= ~EXTIRQ_CFG_MASK(irq); - bcm_perf_writel(reg, PERF_EXTIRQ_CFG_REG); + regaddr = get_ext_irq_perf_reg(irq); + reg = bcm_perf_readl(regaddr); + + if (BCMCPU_IS_6348()) + reg &= ~EXTIRQ_CFG_MASK_6348(irq % 4); + else + reg &= ~EXTIRQ_CFG_MASK(irq % 4); + + bcm_perf_writel(reg, regaddr); + if (is_ext_irq_cascaded) + internal_irq_mask(irq + ext_irq_start); } static void bcm63xx_external_irq_unmask(struct irq_data *d) { - unsigned int irq = d->irq - IRQ_EXT_BASE; - u32 reg; + unsigned int irq = d->irq - IRQ_EXTERNAL_BASE; + u32 reg, regaddr; - reg = bcm_perf_readl(PERF_EXTIRQ_CFG_REG); - reg |= EXTIRQ_CFG_MASK(irq); - bcm_perf_writel(reg, PERF_EXTIRQ_CFG_REG); + regaddr = get_ext_irq_perf_reg(irq); + reg = bcm_perf_readl(regaddr); + + if (BCMCPU_IS_6348()) + reg |= EXTIRQ_CFG_MASK_6348(irq % 4); + else + reg |= EXTIRQ_CFG_MASK(irq % 4); + + bcm_perf_writel(reg, regaddr); + + if (is_ext_irq_cascaded) + internal_irq_unmask(irq + ext_irq_start); } static void bcm63xx_external_irq_clear(struct irq_data *d) { - unsigned int irq = d->irq - IRQ_EXT_BASE; - u32 reg; + unsigned int irq = d->irq - IRQ_EXTERNAL_BASE; + u32 reg, regaddr; - reg = bcm_perf_readl(PERF_EXTIRQ_CFG_REG); - reg |= EXTIRQ_CFG_CLEAR(irq); - bcm_perf_writel(reg, PERF_EXTIRQ_CFG_REG); -} + regaddr = get_ext_irq_perf_reg(irq); + reg = bcm_perf_readl(regaddr); -static unsigned int bcm63xx_external_irq_startup(struct irq_data *d) -{ - set_c0_status(0x100 << (d->irq - IRQ_MIPS_BASE)); - irq_enable_hazard(); - bcm63xx_external_irq_unmask(d); - return 0; -} + if (BCMCPU_IS_6348()) + reg |= EXTIRQ_CFG_CLEAR_6348(irq % 4); + else + reg |= EXTIRQ_CFG_CLEAR(irq % 4); -static void bcm63xx_external_irq_shutdown(struct irq_data *d) -{ - bcm63xx_external_irq_mask(d); - clear_c0_status(0x100 << (d->irq - IRQ_MIPS_BASE)); - irq_disable_hazard(); + bcm_perf_writel(reg, regaddr); } static int bcm63xx_external_irq_set_type(struct irq_data *d, unsigned int flow_type) { - unsigned int irq = d->irq - IRQ_EXT_BASE; - u32 reg; + unsigned int irq = d->irq - IRQ_EXTERNAL_BASE; + u32 reg, regaddr; + int levelsense, sense, bothedge; flow_type &= IRQ_TYPE_SENSE_MASK; if (flow_type == IRQ_TYPE_NONE) flow_type = IRQ_TYPE_LEVEL_LOW; - reg = bcm_perf_readl(PERF_EXTIRQ_CFG_REG); + levelsense = sense = bothedge = 0; switch (flow_type) { case IRQ_TYPE_EDGE_BOTH: - reg &= ~EXTIRQ_CFG_LEVELSENSE(irq); - reg |= EXTIRQ_CFG_BOTHEDGE(irq); + bothedge = 1; break; case IRQ_TYPE_EDGE_RISING: - reg &= ~EXTIRQ_CFG_LEVELSENSE(irq); - reg |= EXTIRQ_CFG_SENSE(irq); - reg &= ~EXTIRQ_CFG_BOTHEDGE(irq); + sense = 1; break; case IRQ_TYPE_EDGE_FALLING: - reg &= ~EXTIRQ_CFG_LEVELSENSE(irq); - reg &= ~EXTIRQ_CFG_SENSE(irq); - reg &= ~EXTIRQ_CFG_BOTHEDGE(irq); break; case IRQ_TYPE_LEVEL_HIGH: - reg |= EXTIRQ_CFG_LEVELSENSE(irq); - reg |= EXTIRQ_CFG_SENSE(irq); + levelsense = 1; + sense = 1; break; case IRQ_TYPE_LEVEL_LOW: - reg |= EXTIRQ_CFG_LEVELSENSE(irq); - reg &= ~EXTIRQ_CFG_SENSE(irq); + levelsense = 1; break; default: printk(KERN_ERR "bogus flow type combination given !\n"); return -EINVAL; } - bcm_perf_writel(reg, PERF_EXTIRQ_CFG_REG); + + regaddr = get_ext_irq_perf_reg(irq); + reg = bcm_perf_readl(regaddr); + irq %= 4; + + if (BCMCPU_IS_6348()) { + if (levelsense) + reg |= EXTIRQ_CFG_LEVELSENSE_6348(irq); + else + reg &= ~EXTIRQ_CFG_LEVELSENSE_6348(irq); + if (sense) + reg |= EXTIRQ_CFG_SENSE_6348(irq); + else + reg &= ~EXTIRQ_CFG_SENSE_6348(irq); + if (bothedge) + reg |= EXTIRQ_CFG_BOTHEDGE_6348(irq); + else + reg &= ~EXTIRQ_CFG_BOTHEDGE_6348(irq); + } + + if (BCMCPU_IS_6338() || BCMCPU_IS_6358() || BCMCPU_IS_6368()) { + if (levelsense) + reg |= EXTIRQ_CFG_LEVELSENSE(irq); + else + reg &= ~EXTIRQ_CFG_LEVELSENSE(irq); + if (sense) + reg |= EXTIRQ_CFG_SENSE(irq); + else + reg &= ~EXTIRQ_CFG_SENSE(irq); + if (bothedge) + reg |= EXTIRQ_CFG_BOTHEDGE(irq); + else + reg &= ~EXTIRQ_CFG_BOTHEDGE(irq); + } + + bcm_perf_writel(reg, regaddr); irqd_set_trigger_type(d, flow_type); if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH)) @@ -208,9 +462,6 @@ static struct irq_chip bcm63xx_internal_irq_chip = { static struct irq_chip bcm63xx_external_irq_chip = { .name = "bcm63xx_epic", - .irq_startup = bcm63xx_external_irq_startup, - .irq_shutdown = bcm63xx_external_irq_shutdown, - .irq_ack = bcm63xx_external_irq_clear, .irq_mask = bcm63xx_external_irq_mask, @@ -225,18 +476,30 @@ static struct irqaction cpu_ip2_cascade_action = { .flags = IRQF_NO_THREAD, }; +static struct irqaction cpu_ext_cascade_action = { + .handler = no_action, + .name = "cascade_extirq", + .flags = IRQF_NO_THREAD, +}; + void __init arch_init_irq(void) { int i; + bcm63xx_init_irq(); mips_cpu_irq_init(); for (i = IRQ_INTERNAL_BASE; i < NR_IRQS; ++i) irq_set_chip_and_handler(i, &bcm63xx_internal_irq_chip, handle_level_irq); - for (i = IRQ_EXT_BASE; i < IRQ_EXT_BASE + 4; ++i) + for (i = IRQ_EXTERNAL_BASE; i < IRQ_EXTERNAL_BASE + ext_irq_count; ++i) irq_set_chip_and_handler(i, &bcm63xx_external_irq_chip, handle_edge_irq); - setup_irq(IRQ_MIPS_BASE + 2, &cpu_ip2_cascade_action); + if (!is_ext_irq_cascaded) { + for (i = 3; i < 3 + ext_irq_count; ++i) + setup_irq(MIPS_CPU_IRQ_BASE + i, &cpu_ext_cascade_action); + } + + setup_irq(MIPS_CPU_IRQ_BASE + 2, &cpu_ip2_cascade_action); } diff --git a/arch/mips/bcm63xx/prom.c b/arch/mips/bcm63xx/prom.c index be252efa075..99d7f405cbe 100644 --- a/arch/mips/bcm63xx/prom.c +++ b/arch/mips/bcm63xx/prom.c @@ -32,9 +32,12 @@ void __init prom_init(void) mask = CKCTL_6345_ALL_SAFE_EN; else if (BCMCPU_IS_6348()) mask = CKCTL_6348_ALL_SAFE_EN; - else - /* BCMCPU_IS_6358() */ + else if (BCMCPU_IS_6358()) mask = CKCTL_6358_ALL_SAFE_EN; + else if (BCMCPU_IS_6368()) + mask = CKCTL_6368_ALL_SAFE_EN; + else + mask = 0; reg = bcm_perf_readl(PERF_CKCTL_REG); reg &= ~mask; diff --git a/arch/mips/bcm63xx/setup.c b/arch/mips/bcm63xx/setup.c index d0056598fbf..d209f85d87b 100644 --- a/arch/mips/bcm63xx/setup.c +++ b/arch/mips/bcm63xx/setup.c @@ -63,13 +63,33 @@ static void bcm6348_a1_reboot(void) void bcm63xx_machine_reboot(void) { - u32 reg; + u32 reg, perf_regs[2] = { 0, 0 }; + unsigned int i; /* mask and clear all external irq */ - reg = bcm_perf_readl(PERF_EXTIRQ_CFG_REG); - reg &= ~EXTIRQ_CFG_MASK_ALL; - reg |= EXTIRQ_CFG_CLEAR_ALL; - bcm_perf_writel(reg, PERF_EXTIRQ_CFG_REG); + switch (bcm63xx_get_cpu_id()) { + case BCM6338_CPU_ID: + perf_regs[0] = PERF_EXTIRQ_CFG_REG_6338; + break; + case BCM6348_CPU_ID: + perf_regs[0] = PERF_EXTIRQ_CFG_REG_6348; + break; + case BCM6358_CPU_ID: + perf_regs[0] = PERF_EXTIRQ_CFG_REG_6358; + break; + } + + for (i = 0; i < 2; i++) { + reg = bcm_perf_readl(perf_regs[i]); + if (BCMCPU_IS_6348()) { + reg &= ~EXTIRQ_CFG_MASK_ALL_6348; + reg |= EXTIRQ_CFG_CLEAR_ALL_6348; + } else { + reg &= ~EXTIRQ_CFG_MASK_ALL; + reg |= EXTIRQ_CFG_CLEAR_ALL; + } + bcm_perf_writel(reg, perf_regs[i]); + } if (BCMCPU_IS_6348() && (bcm63xx_get_cpu_rev() == 0xa1)) bcm6348_a1_reboot(); @@ -124,4 +144,4 @@ int __init bcm63xx_register_devices(void) return board_register_devices(); } -arch_initcall(bcm63xx_register_devices); +device_initcall(bcm63xx_register_devices); diff --git a/arch/mips/boot/compressed/uart-alchemy.c b/arch/mips/boot/compressed/uart-alchemy.c index eb063e6dead..3112df8f90d 100644 --- a/arch/mips/boot/compressed/uart-alchemy.c +++ b/arch/mips/boot/compressed/uart-alchemy.c @@ -2,6 +2,9 @@ void putc(char c) { - /* all current (Jan. 2010) in-kernel boards */ +#ifdef CONFIG_MIPS_DB1300 + alchemy_uart_putchar(AU1300_UART2_PHYS_ADDR, c); +#else alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c); +#endif } diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c index 2d9028f1474..260b2736734 100644 --- a/arch/mips/cavium-octeon/setup.c +++ b/arch/mips/cavium-octeon/setup.c @@ -642,14 +642,6 @@ void __init plat_mem_setup(void) total = 0; - /* First add the init memory we will be returning. */ - memory = __pa_symbol(&__init_begin) & PAGE_MASK; - mem_alloc_size = (__pa_symbol(&__init_end) & PAGE_MASK) - memory; - if (mem_alloc_size > 0) { - add_memory_region(memory, mem_alloc_size, BOOT_MEM_RAM); - total += mem_alloc_size; - } - /* * The Mips memory init uses the first memory location for * some memory vectors. When SPARSEMEM is in use, it doesn't @@ -767,11 +759,11 @@ void prom_free_prom_memory(void) : "=r" (insn) : : "$31", "memory"); if ((insn >> 26) != 0x33) - panic("No PREF instruction at Core-14449 probe point.\n"); + panic("No PREF instruction at Core-14449 probe point."); if (((insn >> 16) & 0x1f) != 28) panic("Core-14449 WAR not in place (%04x).\n" - "Please build kernel with proper options (CONFIG_CAVIUM_CN63XXP1).\n", insn); + "Please build kernel with proper options (CONFIG_CAVIUM_CN63XXP1).", insn); } #ifdef CONFIG_CAVIUM_DECODE_RSL cvmx_interrupt_rsl_enable(); @@ -779,7 +771,7 @@ void prom_free_prom_memory(void) /* Add an interrupt handler for general failures. */ if (request_irq(OCTEON_IRQ_RML, octeon_rlm_interrupt, IRQF_SHARED, "RML/RSL", octeon_rlm_interrupt)) { - panic("Unable to request_irq(OCTEON_IRQ_RML)\n"); + panic("Unable to request_irq(OCTEON_IRQ_RML)"); } #endif } diff --git a/arch/mips/cavium-octeon/smp.c b/arch/mips/cavium-octeon/smp.c index efcfff4d462..b1535fe409d 100644 --- a/arch/mips/cavium-octeon/smp.c +++ b/arch/mips/cavium-octeon/smp.c @@ -210,7 +210,7 @@ void octeon_prepare_cpus(unsigned int max_cpus) if (request_irq(OCTEON_IRQ_MBOX0, mailbox_interrupt, IRQF_PERCPU | IRQF_NO_THREAD, "SMP-IPI", mailbox_interrupt)) { - panic("Cannot request_irq(OCTEON_IRQ_MBOX0)\n"); + panic("Cannot request_irq(OCTEON_IRQ_MBOX0)"); } } diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig index 4044c9e0fb7..17a36c12517 100644 --- a/arch/mips/configs/db1000_defconfig +++ b/arch/mips/configs/db1000_defconfig @@ -1,118 +1,359 @@ +CONFIG_MIPS=y CONFIG_MIPS_ALCHEMY=y +CONFIG_MIPS_DB1000=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y +CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_HZ_100=y -# CONFIG_SECCOMP is not set +CONFIG_HZ=100 +CONFIG_PREEMPT_NONE=y CONFIG_EXPERIMENTAL=y -CONFIG_LOCALVERSION="-db1000" +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_CROSS_COMPILE="" +CONFIG_LOCALVERSION="-db1x00" +CONFIG_LOCALVERSION_AUTO=y CONFIG_KERNEL_LZMA=y +CONFIG_DEFAULT_HOSTNAME="db1x00" +CONFIG_SWAP=y CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_FHANDLE=y +CONFIG_AUDIT=y CONFIG_TINY_RCU=y -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_LOG_BUF_SHIFT=18 +CONFIG_NAMESPACES=y +CONFIG_UTS_NS=y +CONFIG_IPC_NS=y +CONFIG_USER_NS=y +CONFIG_PID_NS=y +CONFIG_NET_NS=y +CONFIG_SYSCTL=y CONFIG_EXPERT=y -# CONFIG_KALLSYMS is not set -# CONFIG_PCSPKR_PLATFORM is not set -# CONFIG_VM_EVENT_COUNTERS is not set -# CONFIG_COMPAT_BRK is not set +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_EMBEDDED=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y +CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_LBDAF is not set -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set +CONFIG_SLABINFO=y +CONFIG_BLOCK=y +CONFIG_LBDAF=y +CONFIG_BLK_DEV_BSG=y +CONFIG_BLK_DEV_BSGLIB=y +CONFIG_IOSCHED_NOOP=y +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +CONFIG_FREEZER=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y CONFIG_PCCARD=y +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y -CONFIG_PM=y +CONFIG_BINFMT_ELF=y +CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +CONFIG_PM_SLEEP=y CONFIG_PM_RUNTIME=y +CONFIG_PM=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y +CONFIG_XFRM=y CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -# CONFIG_WIRELESS is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_NET_IPIP=y +CONFIG_INET_TUNNEL=y +CONFIG_INET_LRO=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_IPV6=y +CONFIG_INET6_XFRM_MODE_TRANSPORT=y +CONFIG_INET6_XFRM_MODE_TUNNEL=y +CONFIG_INET6_XFRM_MODE_BEET=y +CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y +CONFIG_STP=y +CONFIG_GARP=y +CONFIG_BRIDGE=y +CONFIG_BRIDGE_IGMP_SNOOPING=y +CONFIG_VLAN_8021Q=y +CONFIG_VLAN_8021Q_GVRP=y +CONFIG_LLC=y +CONFIG_LLC2=y +CONFIG_DNS_RESOLVER=y +CONFIG_BT=y +CONFIG_BT_L2CAP=y +CONFIG_BT_SCO=y +CONFIG_BT_RFCOMM=y +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=y +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=y +CONFIG_BT_HCIBTUSB=y +CONFIG_UEVENT_HELPER_PATH="" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +CONFIG_MTD_CFI_GEOMETRY=y +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +CONFIG_MTD_CFI_I4=y +CONFIG_MTD_CFI_I8=y +CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_UTIL=y CONFIG_MTD_PHYSMAP=y -# CONFIG_MISC_DEVICES is not set +CONFIG_SCSI_MOD=y +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +CONFIG_SCSI_PROC_FS=y +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_SG=y +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_CONSTANTS=y +CONFIG_ATA=y +CONFIG_ATA_VERBOSE_ERROR=y +CONFIG_ATA_SFF=y +CONFIG_ATA_BMDMA=y +CONFIG_PATA_HPT37X=y +CONFIG_PATA_PCMCIA=y +CONFIG_MD=y +CONFIG_BLK_DEV_DM=y +CONFIG_FIREWIRE=y +CONFIG_FIREWIRE_OHCI=y +CONFIG_FIREWIRE_OHCI_DEBUG=y +CONFIG_FIREWIRE_NET=y CONFIG_NETDEVICES=y -CONFIG_MARVELL_PHY=y -CONFIG_DAVICOM_PHY=y -CONFIG_QSEMI_PHY=y -CONFIG_LXT_PHY=y -CONFIG_CICADA_PHY=y -CONFIG_VITESSE_PHY=y -CONFIG_SMSC_PHY=y -CONFIG_BROADCOM_PHY=y -CONFIG_ICPLUS_PHY=y -CONFIG_REALTEK_PHY=y -CONFIG_NATIONAL_PHY=y -CONFIG_STE10XP=y -CONFIG_LSI_ET1011C_PHY=y -CONFIG_NET_ETHERNET=y CONFIG_MII=y +CONFIG_PHYLIB=y +CONFIG_NET_ETHERNET=y CONFIG_MIPS_AU1X00_ENET=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_WLAN is not set -# CONFIG_INPUT_MOUSEDEV is not set +CONFIG_NET_PCMCIA=y +CONFIG_PCMCIA_3C589=y +CONFIG_PCMCIA_PCNET=y +CONFIG_PPP=y +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=y +CONFIG_PPP_SYNC_TTY=y +CONFIG_PPP_DEFLATE=y +CONFIG_PPP_BSDCOMP=y +CONFIG_PPP_MPPE=y +CONFIG_PPPOE=y +CONFIG_INPUT=y CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set +CONFIG_INPUT_MISC=y +CONFIG_INPUT_UINPUT=y +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_DEVPTS_MULTIPLE_INSTANCES=y +CONFIG_DEVKMEM=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_TTY_PRINTK=y +CONFIG_DEVPORT=y +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_AU1100=y +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +CONFIG_FONTS=y +CONFIG_FONT_8x16=y +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_JACK=y +CONFIG_SND_SEQUENCER=y +CONFIG_SND_HRTIMER=y +CONFIG_SND_SEQ_HRTIMER_DEFAULT=y +CONFIG_SND_DYNAMIC_MINORS=y +CONFIG_SND_VMASTER=y +CONFIG_SND_AC97_CODEC=y +CONFIG_SND_SOC=y +CONFIG_SND_SOC_AC97_BUS=y +CONFIG_SND_SOC_AU1XAUDIO=y +CONFIG_SND_SOC_AU1XAC97C=y +CONFIG_SND_SOC_DB1000=y +CONFIG_SND_SOC_AC97_CODEC=y +CONFIG_AC97_BUS=y +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +CONFIG_HIDRAW=y +CONFIG_USB_HID=y +CONFIG_USB_SUPPORT=y CONFIG_USB=y -# CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_DYNAMIC_MINORS=y CONFIG_USB_SUSPEND=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +CONFIG_USB_EHCI_TT_NEWSCHED=y CONFIG_USB_OHCI_HCD=y +CONFIG_USB_UHCI_HCD=y +CONFIG_USB_STORAGE=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y CONFIG_RTC_DRV_AU1XXX=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set -# CONFIG_EXT3_FS_XATTR is not set -# CONFIG_PROC_PAGE_MONITOR is not set +CONFIG_EXT4_FS=y +CONFIG_EXT4_USE_FOR_EXT23=y +CONFIG_EXT4_FS_XATTR=y +CONFIG_EXT4_FS_POSIX_ACL=y +CONFIG_EXT4_FS_SECURITY=y +CONFIG_JBD2=y +CONFIG_FS_MBCACHE=y +CONFIG_FS_POSIX_ACL=y +CONFIG_EXPORTFS=y +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_GENERIC_ACL=y +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y CONFIG_TMPFS=y -CONFIG_CRAMFS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_TMPFS_XATTR=y +CONFIG_MISC_FILESYSTEMS=y +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +CONFIG_JFFS2_SUMMARY=y +CONFIG_JFFS2_FS_XATTR=y +CONFIG_JFFS2_FS_POSIX_ACL=y +CONFIG_JFFS2_FS_SECURITY=y +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_LZO=y +CONFIG_JFFS2_RTIME=y +CONFIG_JFFS2_RUBIN=y +CONFIG_JFFS2_CMODE_PRIORITY=y CONFIG_SQUASHFS=y +CONFIG_SQUASHFS_ZLIB=y +CONFIG_SQUASHFS_LZO=y +CONFIG_SQUASHFS_XZ=y +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y +CONFIG_NFS_V4=y +CONFIG_NFS_V4_1=y +CONFIG_PNFS_FILE_LAYOUT=y +CONFIG_PNFS_BLOCK=y CONFIG_ROOT_NFS=y +CONFIG_NFS_USE_KERNEL_DNS=y +CONFIG_NFS_USE_NEW_IDMAPPER=y +CONFIG_NFSD=y +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +CONFIG_NFSD_V4=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_SUNRPC_BACKCHANNEL=y +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_CODEPAGE_1250=y +CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_15=y CONFIG_NLS_UTF8=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_STRIP_ASM_SYMS=y -CONFIG_DEBUG_KERNEL=y -# CONFIG_SCHED_DEBUG is not set -# CONFIG_FTRACE is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_EARLY_PRINTK=y +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="noirqdebug rootwait root=/dev/sda1 rootfstype=ext4 console=ttyS0,115200 video=au1100fb:panel:CRT_800x600_16" CONFIG_DEBUG_ZBOOT=y CONFIG_KEYS=y CONFIG_KEYS_DEBUG_PROC_KEYS=y +CONFIG_SECURITYFS=y +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP2=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y +CONFIG_CRYPTO_WORKQUEUE=y +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_SHA1=y +CONFIG_CRYPTO_AES=y +CONFIG_CRYPTO_ANSI_CPRNG=y +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +CONFIG_CRC16=y +CONFIG_CRC_ITU_T=y +CONFIG_CRC32=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_XZ_DEC=y diff --git a/arch/mips/configs/db1100_defconfig b/arch/mips/configs/db1100_defconfig deleted file mode 100644 index c6b49938ee8..00000000000 --- a/arch/mips/configs/db1100_defconfig +++ /dev/null @@ -1,122 +0,0 @@ -CONFIG_MIPS_ALCHEMY=y -CONFIG_MIPS_DB1100=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_HZ_100=y -# CONFIG_SECCOMP is not set -CONFIG_EXPERIMENTAL=y -CONFIG_LOCALVERSION="-db1100" -CONFIG_KERNEL_LZMA=y -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_TINY_RCU=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_EXPERT=y -# CONFIG_SYSCTL_SYSCALL is not set -# CONFIG_KALLSYMS is not set -# CONFIG_PCSPKR_PLATFORM is not set -# CONFIG_COMPAT_BRK is not set -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_LBDAF is not set -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_PCCARD=y -CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y -CONFIG_PM=y -CONFIG_PM_RUNTIME=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -# CONFIG_WIRELESS is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_PHYSMAP=y -# CONFIG_BLK_DEV is not set -# CONFIG_MISC_DEVICES is not set -CONFIG_IDE=y -CONFIG_IDE_TASK_IOCTL=y -CONFIG_NETDEVICES=y -CONFIG_MARVELL_PHY=y -CONFIG_DAVICOM_PHY=y -CONFIG_QSEMI_PHY=y -CONFIG_LXT_PHY=y -CONFIG_CICADA_PHY=y -CONFIG_VITESSE_PHY=y -CONFIG_SMSC_PHY=y -CONFIG_BROADCOM_PHY=y -CONFIG_ICPLUS_PHY=y -CONFIG_REALTEK_PHY=y -CONFIG_NATIONAL_PHY=y -CONFIG_STE10XP=y -CONFIG_LSI_ET1011C_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_MIPS_AU1X00_ENET=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_WLAN is not set -# CONFIG_INPUT_MOUSEDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_VT_HW_CONSOLE_BINDING=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -CONFIG_FB=y -CONFIG_FB_AU1100=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FONTS=y -CONFIG_FONT_8x16=y -# CONFIG_HID_SUPPORT is not set -CONFIG_USB=y -# CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_DYNAMIC_MINORS=y -CONFIG_USB_SUSPEND=y -CONFIG_USB_OHCI_HCD=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_AU1XXX=y -CONFIG_EXT2_FS=y -# CONFIG_PROC_PAGE_MONITOR is not set -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_JFFS2_FS_XATTR=y -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_LZO=y -CONFIG_JFFS2_RUBIN=y -CONFIG_SQUASHFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_STRIP_ASM_SYMS=y -CONFIG_DEBUG_KERNEL=y -# CONFIG_SCHED_DEBUG is not set -# CONFIG_FTRACE is not set -CONFIG_DEBUG_ZBOOT=y -CONFIG_KEYS=y -CONFIG_KEYS_DEBUG_PROC_KEYS=y -CONFIG_SECURITYFS=y diff --git a/arch/mips/configs/db1300_defconfig b/arch/mips/configs/db1300_defconfig new file mode 100644 index 00000000000..c38b190151c --- /dev/null +++ b/arch/mips/configs/db1300_defconfig @@ -0,0 +1,391 @@ +CONFIG_MIPS=y +CONFIG_MIPS_ALCHEMY=y +CONFIG_ALCHEMY_GPIOINT_AU1300=y +CONFIG_MIPS_DB1300=y +CONFIG_SOC_AU1300=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_ARCH_SUPPORTS_OPROFILE=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y +CONFIG_CEVT_R4K_LIB=y +CONFIG_CSRC_R4K_LIB=y +CONFIG_DMA_COHERENT=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y +CONFIG_GENERIC_GPIO=y +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y +CONFIG_IRQ_CPU=y +CONFIG_MIPS_L1_CACHE_SHIFT=5 +CONFIG_CPU_MIPS32_R1=y +CONFIG_SYS_SUPPORTS_ZBOOT=y +CONFIG_SYS_HAS_CPU_MIPS32_R1=y +CONFIG_CPU_MIPS32=y +CONFIG_CPU_MIPSR1=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_HARDWARE_WATCHPOINTS=y +CONFIG_32BIT=y +CONFIG_PAGE_SIZE_4KB=y +CONFIG_FORCE_MAX_ZONEORDER=11 +CONFIG_CPU_HAS_PREFETCH=y +CONFIG_MIPS_MT_DISABLED=y +CONFIG_64BIT_PHYS_ADDR=y +CONFIG_ARCH_PHYS_ADDR_T_64BIT=y +CONFIG_CPU_HAS_SYNC=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_COMPACTION=y +CONFIG_MIGRATION=y +CONFIG_PHYS_ADDR_T_64BIT=y +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_NEED_PER_CPU_KM=y +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_HZ_100=y +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_HZ=100 +CONFIG_PREEMPT_NONE=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y +CONFIG_HAVE_IRQ_WORK=y +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_CROSS_COMPILE="" +CONFIG_LOCALVERSION="-db1300" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_BZIP2=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_HAVE_KERNEL_LZO=y +CONFIG_KERNEL_LZMA=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y +CONFIG_FHANDLE=y +CONFIG_HAVE_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_TINY_RCU=y +CONFIG_LOG_BUF_SHIFT=19 +CONFIG_NAMESPACES=y +CONFIG_UTS_NS=y +CONFIG_IPC_NS=y +CONFIG_USER_NS=y +CONFIG_PID_NS=y +CONFIG_NET_NS=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EXPERT=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_EMBEDDED=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y +CONFIG_SLAB=y +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_BLOCK=y +CONFIG_LBDAF=y +CONFIG_BLK_DEV_BSG=y +CONFIG_IOSCHED_NOOP=y +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +CONFIG_INLINE_SPIN_UNLOCK=y +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +CONFIG_INLINE_READ_UNLOCK=y +CONFIG_INLINE_READ_UNLOCK_IRQ=y +CONFIG_INLINE_WRITE_UNLOCK=y +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +CONFIG_MMU=y +CONFIG_PCCARD=y +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y +CONFIG_BINFMT_ELF=y +CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y +CONFIG_TRAD_SIGNALS=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +CONFIG_INET_TUNNEL=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_IPV6=y +CONFIG_INET6_XFRM_MODE_TRANSPORT=y +CONFIG_INET6_XFRM_MODE_TUNNEL=y +CONFIG_INET6_XFRM_MODE_BEET=y +CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +CONFIG_MTD=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_CFI=y +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_UTIL=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_NAND_ECC=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_IDS=y +CONFIG_MTD_NAND_PLATFORM=y +CONFIG_BLK_DEV=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_UB=y +CONFIG_HAVE_IDE=y +CONFIG_IDE=y +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +CONFIG_BLK_DEV_IDECS=y +CONFIG_IDE_TASK_IOCTL=y +CONFIG_IDE_PROC_FS=y +CONFIG_BLK_DEV_PLATFORM=y +CONFIG_SCSI_MOD=y +CONFIG_NETDEVICES=y +CONFIG_MII=y +CONFIG_PHYLIB=y +CONFIG_SMSC_PHY=y +CONFIG_NET_ETHERNET=y +CONFIG_SMSC911X=y +CONFIG_INPUT=y +CONFIG_INPUT_EVDEV=y +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_GPIO=y +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_WM97XX=y +CONFIG_TOUCHSCREEN_WM9712=y +CONFIG_TOUCHSCREEN_WM9713=y +CONFIG_INPUT_MISC=y +CONFIG_INPUT_UINPUT=y +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_UNIX98_PTYS=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_SMBUS=y +CONFIG_I2C_AU1550=y +CONFIG_SPI=y +CONFIG_SPI_MASTER=y +CONFIG_SPI_AU1550=y +CONFIG_SPI_BITBANG=y +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +CONFIG_HWMON=y +CONFIG_HWMON_VID=y +CONFIG_SENSORS_ADM1025=y +CONFIG_FB=y +CONFIG_FB_AU1200=y +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FONTS=y +CONFIG_FONT_ACORN_8x8=y +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_JACK=y +CONFIG_SND_HRTIMER=y +CONFIG_SND_DYNAMIC_MINORS=y +CONFIG_SND_VERBOSE_PROCFS=y +CONFIG_SND_VERBOSE_PRINTK=y +CONFIG_SND_VMASTER=y +CONFIG_SND_AC97_CODEC=y +CONFIG_SND_SOC=y +CONFIG_SND_SOC_CACHE_LZO=y +CONFIG_SND_SOC_AC97_BUS=y +CONFIG_SND_SOC_AU1XPSC=y +CONFIG_SND_SOC_AU1XPSC_I2S=y +CONFIG_SND_SOC_AU1XPSC_AC97=y +CONFIG_SND_SOC_DB1300=y +CONFIG_SND_SOC_I2C_AND_SPI=y +CONFIG_SND_SOC_WM8731=y +CONFIG_SND_SOC_WM9712=y +CONFIG_AC97_BUS=y +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +CONFIG_HIDRAW=y +CONFIG_USB_HID=y +CONFIG_USB_HIDDEV=y +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +CONFIG_USB_DYNAMIC_MINORS=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +CONFIG_USB_EHCI_TT_NEWSCHED=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +CONFIG_RTC_INTF_DEV_UIE_EMUL=y +CONFIG_RTC_DRV_AU1XXX=y +CONFIG_EXT2_FS=y +CONFIG_FS_POSIX_ACL=y +CONFIG_EXPORTFS=y +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_GENERIC_ACL=y +CONFIG_FAT_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_TMPFS_XATTR=y +CONFIG_MISC_FILESYSTEMS=y +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +CONFIG_JFFS2_SUMMARY=y +CONFIG_JFFS2_FS_XATTR=y +CONFIG_JFFS2_FS_POSIX_ACL=y +CONFIG_JFFS2_FS_SECURITY=y +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_LZO=y +CONFIG_JFFS2_RTIME=y +CONFIG_JFFS2_RUBIN=y +CONFIG_JFFS2_CMODE_PRIORITY=y +CONFIG_SQUASHFS=y +CONFIG_SQUASHFS_XZ=y +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_850=y +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_15=y +CONFIG_NLS_UTF8=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_PRINTK_TIME=y +CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4 +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +CONFIG_STRIP_ASM_SYMS=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_TRACING_SUPPORT=y +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_EARLY_PRINTK=y +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="video=au1200fb:panel:bs console=tty console=ttyS2,115200" +CONFIG_DEBUG_ZBOOT=y +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" +CONFIG_CRYPTO=y +CONFIG_BITREVERSE=y +CONFIG_CRC32=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_XZ_DEC=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y diff --git a/arch/mips/configs/db1500_defconfig b/arch/mips/configs/db1500_defconfig deleted file mode 100644 index b6e21c7cb6b..00000000000 --- a/arch/mips/configs/db1500_defconfig +++ /dev/null @@ -1,128 +0,0 @@ -CONFIG_MIPS_ALCHEMY=y -CONFIG_MIPS_DB1500=y -CONFIG_CPU_LITTLE_ENDIAN=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_HZ_100=y -# CONFIG_SECCOMP is not set -CONFIG_EXPERIMENTAL=y -CONFIG_LOCALVERSION="-db1500" -CONFIG_KERNEL_LZMA=y -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_EXPERT=y -# CONFIG_KALLSYMS is not set -# CONFIG_PCSPKR_PLATFORM is not set -# CONFIG_VM_EVENT_COUNTERS is not set -# CONFIG_COMPAT_BRK is not set -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_PCI=y -CONFIG_PCCARD=y -# CONFIG_CARDBUS is not set -CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y -CONFIG_PM=y -CONFIG_PM_RUNTIME=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -# CONFIG_WIRELESS is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_PHYSMAP=y -# CONFIG_MISC_DEVICES is not set -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECS=y -# CONFIG_IDEPCI_PCIBUS_ORDER is not set -CONFIG_BLK_DEV_HPT366=y -CONFIG_NETDEVICES=y -CONFIG_MARVELL_PHY=y -CONFIG_DAVICOM_PHY=y -CONFIG_QSEMI_PHY=y -CONFIG_LXT_PHY=y -CONFIG_CICADA_PHY=y -CONFIG_VITESSE_PHY=y -CONFIG_SMSC_PHY=y -CONFIG_BROADCOM_PHY=y -CONFIG_ICPLUS_PHY=y -CONFIG_REALTEK_PHY=y -CONFIG_NATIONAL_PHY=y -CONFIG_STE10XP=y -CONFIG_LSI_ET1011C_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_MIPS_AU1X00_ENET=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_WLAN is not set -# CONFIG_INPUT_MOUSEDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_SERIAL_8250_PCI is not set -# CONFIG_LEGACY_PTYS is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -# CONFIG_VGA_ARB is not set -# CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set -CONFIG_USB=y -# CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_DYNAMIC_MINORS=y -CONFIG_USB_SUSPEND=y -CONFIG_USB_OHCI_HCD=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_AU1XXX=y -CONFIG_EXT2_FS=y -# CONFIG_PROC_PAGE_MONITOR is not set -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_JFFS2_FS_XATTR=y -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_LZO=y -CONFIG_JFFS2_RUBIN=y -CONFIG_SQUASHFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_CODEPAGE_1250=y -CONFIG_NLS_ASCII=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_ISO8859_15=y -CONFIG_NLS_UTF8=y -CONFIG_STRIP_ASM_SYMS=y -CONFIG_DEBUG_KERNEL=y -# CONFIG_SCHED_DEBUG is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -# CONFIG_FTRACE is not set -CONFIG_DEBUG_ZBOOT=y -CONFIG_KEYS=y -CONFIG_KEYS_DEBUG_PROC_KEYS=y -CONFIG_SECURITYFS=y diff --git a/arch/mips/configs/db1550_defconfig b/arch/mips/configs/db1550_defconfig index 798a553c9e8..36cda27725e 100644 --- a/arch/mips/configs/db1550_defconfig +++ b/arch/mips/configs/db1550_defconfig @@ -1,145 +1,262 @@ +CONFIG_MIPS=y CONFIG_MIPS_ALCHEMY=y CONFIG_MIPS_DB1550=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y +CONFIG_GENERIC_GPIO=y +CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_HZ_100=y -# CONFIG_SECCOMP is not set +CONFIG_HZ=100 CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="-db1550" +CONFIG_LOCALVERSION_AUTO=y CONFIG_KERNEL_LZMA=y +CONFIG_DEFAULT_HOSTNAME="db1550" +CONFIG_SWAP=y CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y +CONFIG_FHANDLE=y +CONFIG_AUDIT=y CONFIG_TINY_RCU=y -CONFIG_LOG_BUF_SHIFT=14 +CONFIG_LOG_BUF_SHIFT=18 +CONFIG_NAMESPACES=y +CONFIG_UTS_NS=y +CONFIG_IPC_NS=y +CONFIG_USER_NS=y +CONFIG_PID_NS=y +CONFIG_NET_NS=y CONFIG_EXPERT=y -# CONFIG_SYSCTL_SYSCALL is not set -# CONFIG_KALLSYMS is not set -# CONFIG_PCSPKR_PLATFORM is not set -# CONFIG_VM_EVENT_COUNTERS is not set -# CONFIG_COMPAT_BRK is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_EMBEDDED=y +CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set +CONFIG_BLOCK=y +CONFIG_LBDAF=y +CONFIG_BLK_DEV_BSG=y +CONFIG_BLK_DEV_BSGLIB=y +CONFIG_IOSCHED_NOOP=y +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" CONFIG_PCI=y CONFIG_PCCARD=y -# CONFIG_CARDBUS is not set +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y -CONFIG_PM=y +CONFIG_BINFMT_ELF=y +CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y +CONFIG_BINFMT_MISC=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +CONFIG_PM_SLEEP=y CONFIG_PM_RUNTIME=y +CONFIG_PM=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y +CONFIG_XFRM=y CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -# CONFIG_WIRELESS is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_INET_TUNNEL=y +CONFIG_INET_LRO=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_IPV6=y +CONFIG_INET6_XFRM_MODE_TRANSPORT=y +CONFIG_INET6_XFRM_MODE_TUNNEL=y +CONFIG_INET6_XFRM_MODE_BEET=y +CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y +CONFIG_DNS_RESOLVER=y +CONFIG_UEVENT_HELPER_PATH="" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_UTIL=y CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_M25P80=y +CONFIG_MTD_NAND_ECC=y CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_AU1550=y -CONFIG_BLK_DEV_UB=y -# CONFIG_MISC_DEVICES is not set -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECS=y -CONFIG_BLK_DEV_IDECD=y -# CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS is not set -CONFIG_IDE_TASK_IOCTL=y -# CONFIG_IDEPCI_PCIBUS_ORDER is not set -CONFIG_BLK_DEV_HPT366=y +CONFIG_MTD_NAND_IDS=y +CONFIG_MTD_NAND_PLATFORM=y +CONFIG_MISC_DEVICES=y +CONFIG_EEPROM_AT24=y +CONFIG_SCSI_MOD=y +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_SG=y +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_SCAN_ASYNC=y +CONFIG_ATA=y +CONFIG_ATA_SFF=y +CONFIG_ATA_BMDMA=y +CONFIG_PATA_HPT37X=y +CONFIG_PATA_PCMCIA=y +CONFIG_MD=y +CONFIG_BLK_DEV_DM=y CONFIG_NETDEVICES=y -CONFIG_MARVELL_PHY=y -CONFIG_DAVICOM_PHY=y -CONFIG_QSEMI_PHY=y -CONFIG_LXT_PHY=y -CONFIG_CICADA_PHY=y -CONFIG_VITESSE_PHY=y -CONFIG_SMSC_PHY=y -CONFIG_BROADCOM_PHY=y -CONFIG_ICPLUS_PHY=y -CONFIG_REALTEK_PHY=y -CONFIG_NATIONAL_PHY=y -CONFIG_STE10XP=y -CONFIG_LSI_ET1011C_PHY=y -CONFIG_NET_ETHERNET=y CONFIG_MII=y +CONFIG_PHYLIB=y +CONFIG_NET_ETHERNET=y CONFIG_MIPS_AU1X00_ENET=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_WLAN is not set -# CONFIG_INPUT_MOUSEDEV is not set +CONFIG_NET_PCMCIA=y +CONFIG_PCMCIA_3C589=y +CONFIG_PCMCIA_PCNET=y +CONFIG_INPUT=y CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_DEVPTS_MULTIPLE_INSTANCES=y +CONFIG_DEVKMEM=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_HW_RANDOM is not set +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_DEVPORT=y CONFIG_I2C=y -# CONFIG_I2C_COMPAT is not set +CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y -# CONFIG_I2C_HELPER_AUTO is not set CONFIG_I2C_AU1550=y CONFIG_SPI=y +CONFIG_SPI_MASTER=y CONFIG_SPI_AU1550=y -# CONFIG_HWMON is not set -# CONFIG_VGA_ARB is not set -# CONFIG_VGA_CONSOLE is not set +CONFIG_SPI_BITBANG=y +CONFIG_HWMON=y +CONFIG_SENSORS_ADM1025=y +CONFIG_SENSORS_LM70=y +CONFIG_DUMMY_CONSOLE=y CONFIG_SOUND=y CONFIG_SND=y -CONFIG_SND_HRTIMER=y -CONFIG_SND_DYNAMIC_MINORS=y -# CONFIG_SND_SUPPORT_OLD_API is not set -# CONFIG_SND_VERBOSE_PROCFS is not set -# CONFIG_SND_DRIVERS is not set -# CONFIG_SND_PCI is not set -# CONFIG_SND_SPI is not set -# CONFIG_SND_MIPS is not set -# CONFIG_SND_PCMCIA is not set +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_JACK=y +CONFIG_SND_VMASTER=y +CONFIG_SND_AC97_CODEC=y CONFIG_SND_SOC=y +CONFIG_SND_SOC_AC97_BUS=y CONFIG_SND_SOC_AU1XPSC=y -# CONFIG_HID_SUPPORT is not set +CONFIG_SND_SOC_AU1XPSC_I2S=y +CONFIG_SND_SOC_AU1XPSC_AC97=y +CONFIG_SND_SOC_DB1200=y +CONFIG_SND_SOC_I2C_AND_SPI=y +CONFIG_SND_SOC_AC97_CODEC=y +CONFIG_SND_SOC_WM8731=y +CONFIG_SND_SOC_WM9712=y +CONFIG_AC97_BUS=y CONFIG_USB=y -# CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_DYNAMIC_MINORS=y -CONFIG_USB_SUSPEND=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y +CONFIG_USB_EHCI_TT_NEWSCHED=y CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_USB_UHCI_HCD=y +CONFIG_USB_STORAGE=y +CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y CONFIG_RTC_DRV_AU1XXX=y -CONFIG_EXT2_FS=y -# CONFIG_PROC_PAGE_MONITOR is not set +CONFIG_EXT4_FS=y +CONFIG_EXT4_USE_FOR_EXT23=y +CONFIG_EXT4_FS_XATTR=y +CONFIG_EXT4_FS_POSIX_ACL=y +CONFIG_EXT4_FS_SECURITY=y +CONFIG_JBD2=y +CONFIG_FS_MBCACHE=y +CONFIG_FS_POSIX_ACL=y +CONFIG_EXPORTFS=y +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_CONFIGFS_FS=y +CONFIG_MISC_FILESYSTEMS=y CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y CONFIG_JFFS2_SUMMARY=y CONFIG_JFFS2_FS_XATTR=y -# CONFIG_JFFS2_FS_POSIX_ACL is not set -# CONFIG_JFFS2_FS_SECURITY is not set CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_LZO=y +CONFIG_JFFS2_RTIME=y CONFIG_JFFS2_RUBIN=y +CONFIG_JFFS2_CMODE_PRIORITY=y CONFIG_SQUASHFS=y +CONFIG_SQUASHFS_ZLIB=y +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_NFS_V4_1=y +CONFIG_PNFS_FILE_LAYOUT=y +CONFIG_PNFS_BLOCK=y CONFIG_ROOT_NFS=y +CONFIG_NFS_USE_KERNEL_DNS=y +CONFIG_NFS_USE_NEW_IDMAPPER=y +CONFIG_NFSD=y +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +CONFIG_NFSD_V4=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_SUNRPC_BACKCHANNEL=y +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_CODEPAGE_852=y @@ -148,10 +265,21 @@ CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_15=y CONFIG_NLS_UTF8=y -CONFIG_DEBUG_KERNEL=y -# CONFIG_SCHED_DEBUG is not set -# CONFIG_FTRACE is not set -CONFIG_DEBUG_ZBOOT=y +CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4 +CONFIG_FRAME_WARN=1024 +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="noirqdebug console=ttyS0,115200 root=/dev/sda1 rootfstype=ext4" CONFIG_KEYS=y -CONFIG_KEYS_DEBUG_PROC_KEYS=y CONFIG_SECURITYFS=y +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_BITREVERSE=y +CONFIG_CRC16=y +CONFIG_CRC_ITU_T=y +CONFIG_CRC32=y +CONFIG_AUDIT_GENERIC=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_BCH=y +CONFIG_NLATTR=y diff --git a/arch/mips/configs/nlm_xlp_defconfig b/arch/mips/configs/nlm_xlp_defconfig new file mode 100644 index 00000000000..4479fd669ac --- /dev/null +++ b/arch/mips/configs/nlm_xlp_defconfig @@ -0,0 +1,570 @@ +CONFIG_NLM_XLP_BOARD=y +CONFIG_64BIT=y +CONFIG_KSM=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=65536 +CONFIG_SMP=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +# CONFIG_SECCOMP is not set +CONFIG_USE_OF=y +CONFIG_EXPERIMENTAL=y +CONFIG_CROSS_COMPILE="mips-linux-gnu-" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y +CONFIG_AUDIT=y +CONFIG_CGROUPS=y +CONFIG_NAMESPACES=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="usr/dev_file_list usr/rootfs.xlp" +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_INITRAMFS_COMPRESSION_LZMA=y +CONFIG_KALLSYMS_ALL=y +CONFIG_EMBEDDED=y +# CONFIG_COMPAT_BRK is not set +CONFIG_PROFILING=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_BLK_DEV_INTEGRITY=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_BINFMT_MISC=y +CONFIG_MIPS32_COMPAT=y +CONFIG_MIPS32_O32=y +CONFIG_MIPS32_N32=y +CONFIG_PM_RUNTIME=y +CONFIG_PM_DEBUG=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_XFRM_USER=m +CONFIG_NET_KEY=m +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_NET_IPIP=m +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +CONFIG_SYN_COOKIES=y +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m +CONFIG_TCP_CONG_ADVANCED=y +CONFIG_TCP_CONG_HSTCP=m +CONFIG_TCP_CONG_HYBLA=m +CONFIG_TCP_CONG_SCALABLE=m +CONFIG_TCP_CONG_LP=m +CONFIG_TCP_CONG_VENO=m +CONFIG_TCP_CONG_YEAH=m +CONFIG_TCP_CONG_ILLINOIS=m +CONFIG_TCP_MD5SIG=y +CONFIG_IPV6=y +CONFIG_IPV6_PRIVACY=y +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_IPV6_SIT=m +CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_MULTIPLE_TABLES=y +CONFIG_NETLABEL=y +CONFIG_NETFILTER=y +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_SECMARK=y +CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NF_CT_PROTO_UDPLITE=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_NETLINK=m +CONFIG_NETFILTER_TPROXY=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m +CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_TPROXY=m +CONFIG_NETFILTER_XT_TARGET_TRACE=m +CONFIG_NETFILTER_XT_TARGET_SECMARK=m +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_IPRANGE=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m +CONFIG_NETFILTER_XT_MATCH_OWNER=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_RATEEST=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +CONFIG_NETFILTER_XT_MATCH_SOCKET=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_TIME=m +CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_VS=m +CONFIG_IP_VS_IPV6=y +CONFIG_IP_VS_PROTO_TCP=y +CONFIG_IP_VS_PROTO_UDP=y +CONFIG_IP_VS_PROTO_ESP=y +CONFIG_IP_VS_PROTO_AH=y +CONFIG_IP_VS_RR=m +CONFIG_IP_VS_WRR=m +CONFIG_IP_VS_LC=m +CONFIG_IP_VS_WLC=m +CONFIG_IP_VS_LBLC=m +CONFIG_IP_VS_LBLCR=m +CONFIG_IP_VS_DH=m +CONFIG_IP_VS_SH=m +CONFIG_IP_VS_SED=m +CONFIG_IP_VS_NQ=m +CONFIG_IP_VS_FTP=m +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_NF_NAT=m +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_SECURITY=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m +CONFIG_NF_CONNTRACK_IPV6=m +CONFIG_IP6_NF_QUEUE=m +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_HL=m +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m +CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_MANGLE=m +CONFIG_IP6_NF_RAW=m +CONFIG_IP6_NF_SECURITY=m +CONFIG_DECNET_NF_GRABULATOR=m +CONFIG_BRIDGE_NF_EBTABLES=m +CONFIG_BRIDGE_EBT_BROUTE=m +CONFIG_BRIDGE_EBT_T_FILTER=m +CONFIG_BRIDGE_EBT_T_NAT=m +CONFIG_BRIDGE_EBT_802_3=m +CONFIG_BRIDGE_EBT_AMONG=m +CONFIG_BRIDGE_EBT_ARP=m +CONFIG_BRIDGE_EBT_IP=m +CONFIG_BRIDGE_EBT_IP6=m +CONFIG_BRIDGE_EBT_LIMIT=m +CONFIG_BRIDGE_EBT_MARK=m +CONFIG_BRIDGE_EBT_PKTTYPE=m +CONFIG_BRIDGE_EBT_STP=m +CONFIG_BRIDGE_EBT_VLAN=m +CONFIG_BRIDGE_EBT_ARPREPLY=m +CONFIG_BRIDGE_EBT_DNAT=m +CONFIG_BRIDGE_EBT_MARK_T=m +CONFIG_BRIDGE_EBT_REDIRECT=m +CONFIG_BRIDGE_EBT_SNAT=m +CONFIG_BRIDGE_EBT_LOG=m +CONFIG_BRIDGE_EBT_ULOG=m +CONFIG_BRIDGE_EBT_NFLOG=m +CONFIG_IP_DCCP=m +CONFIG_RDS=m +CONFIG_RDS_TCP=m +CONFIG_TIPC=m +CONFIG_ATM=m +CONFIG_ATM_CLIP=m +CONFIG_ATM_LANE=m +CONFIG_ATM_MPOA=m +CONFIG_ATM_BR2684=m +CONFIG_BRIDGE=m +CONFIG_VLAN_8021Q=m +CONFIG_VLAN_8021Q_GVRP=y +CONFIG_DECNET=m +CONFIG_LLC2=m +CONFIG_IPX=m +CONFIG_ATALK=m +CONFIG_DEV_APPLETALK=m +CONFIG_IPDDP=m +CONFIG_IPDDP_ENCAP=y +CONFIG_IPDDP_DECAP=y +CONFIG_X25=m +CONFIG_LAPB=m +CONFIG_ECONET=m +CONFIG_ECONET_AUNUDP=y +CONFIG_ECONET_NATIVE=y +CONFIG_WAN_ROUTER=m +CONFIG_PHONET=m +CONFIG_IEEE802154=m +CONFIG_NET_SCHED=y +CONFIG_NET_SCH_CBQ=m +CONFIG_NET_SCH_HTB=m +CONFIG_NET_SCH_HFSC=m +CONFIG_NET_SCH_ATM=m +CONFIG_NET_SCH_PRIO=m +CONFIG_NET_SCH_MULTIQ=m +CONFIG_NET_SCH_RED=m +CONFIG_NET_SCH_SFQ=m +CONFIG_NET_SCH_TEQL=m +CONFIG_NET_SCH_TBF=m +CONFIG_NET_SCH_GRED=m +CONFIG_NET_SCH_DSMARK=m +CONFIG_NET_SCH_NETEM=m +CONFIG_NET_SCH_DRR=m +CONFIG_NET_SCH_INGRESS=m +CONFIG_NET_CLS_BASIC=m +CONFIG_NET_CLS_TCINDEX=m +CONFIG_NET_CLS_ROUTE4=m +CONFIG_NET_CLS_FW=m +CONFIG_NET_CLS_U32=m +CONFIG_CLS_U32_MARK=y +CONFIG_NET_CLS_RSVP=m +CONFIG_NET_CLS_RSVP6=m +CONFIG_NET_CLS_FLOW=m +CONFIG_NET_EMATCH=y +CONFIG_NET_EMATCH_CMP=m +CONFIG_NET_EMATCH_NBYTE=m +CONFIG_NET_EMATCH_U32=m +CONFIG_NET_EMATCH_META=m +CONFIG_NET_EMATCH_TEXT=m +CONFIG_NET_CLS_ACT=y +CONFIG_NET_ACT_POLICE=m +CONFIG_NET_ACT_GACT=m +CONFIG_GACT_PROB=y +CONFIG_NET_ACT_MIRRED=m +CONFIG_NET_ACT_IPT=m +CONFIG_NET_ACT_NAT=m +CONFIG_NET_ACT_PEDIT=m +CONFIG_NET_ACT_SIMP=m +CONFIG_NET_ACT_SKBEDIT=m +CONFIG_DCB=y +CONFIG_NET_PKTGEN=m +# CONFIG_WIRELESS is not set +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +# CONFIG_STANDALONE is not set +CONFIG_CONNECTOR=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_NBD=m +CONFIG_BLK_DEV_OSD=m +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=65536 +CONFIG_CDROM_PKTCDVD=y +CONFIG_RAID_ATTRS=m +CONFIG_SCSI=y +CONFIG_SCSI_TGT=m +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=m +CONFIG_CHR_DEV_OSST=m +CONFIG_BLK_DEV_SR=y +CONFIG_CHR_DEV_SG=y +CONFIG_CHR_DEV_SCH=m +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_CONSTANTS=y +CONFIG_SCSI_LOGGING=y +CONFIG_SCSI_SCAN_ASYNC=y +CONFIG_SCSI_SPI_ATTRS=m +CONFIG_SCSI_FC_TGT_ATTRS=y +CONFIG_SCSI_SAS_LIBSAS=m +CONFIG_SCSI_SRP_ATTRS=m +CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_ISCSI_TCP=m +CONFIG_LIBFCOE=m +CONFIG_SCSI_DEBUG=m +CONFIG_SCSI_DH=y +CONFIG_SCSI_DH_RDAC=m +CONFIG_SCSI_DH_HP_SW=m +CONFIG_SCSI_DH_EMC=m +CONFIG_SCSI_DH_ALUA=m +CONFIG_SCSI_OSD_INITIATOR=m +CONFIG_SCSI_OSD_ULD=m +# CONFIG_INPUT_MOUSEDEV is not set +CONFIG_INPUT_EVDEV=y +CONFIG_INPUT_EVBUG=m +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_SERIO_I8042 is not set +CONFIG_SERIO_SERPORT=m +CONFIG_SERIO_LIBPS2=y +CONFIG_SERIO_RAW=m +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVPTS_MULTIPLE_INSTANCES=y +CONFIG_LEGACY_PTY_COUNT=0 +CONFIG_SERIAL_NONSTANDARD=y +CONFIG_N_HDLC=m +# CONFIG_DEVKMEM is not set +CONFIG_STALDRV=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=48 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_RSA=y +CONFIG_HW_RANDOM=y +CONFIG_HW_RANDOM_TIMERIOMEM=m +CONFIG_RAW_DRIVER=m +# CONFIG_HWMON is not set +# CONFIG_VGA_CONSOLE is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_UIO=y +CONFIG_UIO_PDRV=m +CONFIG_UIO_PDRV_GENIRQ=m +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +CONFIG_EXT4_FS=y +CONFIG_EXT4_FS_POSIX_ACL=y +CONFIG_EXT4_FS_SECURITY=y +CONFIG_GFS2_FS=m +CONFIG_GFS2_FS_LOCKING_DLM=y +CONFIG_OCFS2_FS=m +CONFIG_BTRFS_FS=m +CONFIG_BTRFS_FS_POSIX_ACL=y +CONFIG_NILFS2_FS=m +CONFIG_QUOTA_NETLINK_INTERFACE=y +# CONFIG_PRINT_QUOTA_WARNING is not set +CONFIG_QFMT_V1=m +CONFIG_QFMT_V2=m +CONFIG_AUTOFS4_FS=m +CONFIG_FUSE_FS=y +CONFIG_CUSE=m +CONFIG_FSCACHE=m +CONFIG_FSCACHE_STATS=y +CONFIG_FSCACHE_HISTOGRAM=y +CONFIG_CACHEFILES=m +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_NTFS_FS=m +CONFIG_PROC_KCORE=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_ADFS_FS=m +CONFIG_AFFS_FS=m +CONFIG_ECRYPT_FS=y +CONFIG_HFS_FS=m +CONFIG_HFSPLUS_FS=m +CONFIG_BEFS_FS=m +CONFIG_BFS_FS=m +CONFIG_EFS_FS=m +CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +CONFIG_VXFS_FS=m +CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m +CONFIG_HPFS_FS=m +CONFIG_QNX4FS_FS=m +CONFIG_ROMFS_FS=m +CONFIG_SYSV_FS=m +CONFIG_UFS_FS=m +CONFIG_EXOFS_FS=m +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_NFS_FSCACHE=y +CONFIG_NFSD=m +CONFIG_NFSD_V3_ACL=y +CONFIG_NFSD_V4=y +CONFIG_CIFS=m +CONFIG_CIFS_WEAK_PW_HASH=y +CONFIG_CIFS_UPCALL=y +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +CONFIG_CIFS_DFS_UPCALL=y +CONFIG_NCP_FS=m +CONFIG_NCPFS_PACKET_SIGNING=y +CONFIG_NCPFS_IOCTL_LOCKING=y +CONFIG_NCPFS_STRONG=y +CONFIG_NCPFS_NFS_NS=y +CONFIG_NCPFS_OS2_NS=y +CONFIG_NCPFS_NLS=y +CONFIG_NCPFS_EXTRAS=y +CONFIG_CODA_FS=m +CONFIG_AFS_FS=m +CONFIG_PARTITION_ADVANCED=y +CONFIG_ACORN_PARTITION=y +CONFIG_ACORN_PARTITION_ICS=y +CONFIG_ACORN_PARTITION_RISCIX=y +CONFIG_OSF_PARTITION=y +CONFIG_AMIGA_PARTITION=y +CONFIG_ATARI_PARTITION=y +CONFIG_MAC_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +CONFIG_LDM_PARTITION=y +CONFIG_SGI_PARTITION=y +CONFIG_ULTRIX_PARTITION=y +CONFIG_SUN_PARTITION=y +CONFIG_KARMA_PARTITION=y +CONFIG_EFI_PARTITION=y +CONFIG_SYSV68_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="cp437" +CONFIG_NLS_CODEPAGE_437=m +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_PRINTK_TIME=y +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +CONFIG_UNUSED_SYMBOLS=y +CONFIG_DETECT_HUNG_TASK=y +CONFIG_SCHEDSTATS=y +CONFIG_TIMER_STATS=y +CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_MEMORY_INIT=y +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_SCHED_TRACER=y +CONFIG_BLK_DEV_IO_TRACE=y +CONFIG_KGDB=y +CONFIG_SECURITY=y +CONFIG_SECURITY_NETWORK=y +CONFIG_LSM_MMAP_MIN_ADDR=0 +CONFIG_SECURITY_SELINUX=y +CONFIG_SECURITY_SELINUX_BOOTPARAM=y +CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0 +CONFIG_SECURITY_SELINUX_DISABLE=y +CONFIG_SECURITY_SMACK=y +CONFIG_SECURITY_TOMOYO=y +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_CRYPTD=m +CONFIG_CRYPTO_TEST=m +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_GCM=m +CONFIG_CRYPTO_CTS=m +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_XTS=m +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=m +CONFIG_CRYPTO_VMAC=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_RMD128=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_RMD256=m +CONFIG_CRYPTO_RMD320=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_CAMELLIA=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_SALSA20=m +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_ZLIB=m +CONFIG_CRYPTO_LZO=m +CONFIG_CRC_CCITT=m +CONFIG_CRC7=m diff --git a/arch/mips/configs/nlm_xlr_defconfig b/arch/mips/configs/nlm_xlr_defconfig index e4b399fdaa6..7c68666fdd6 100644 --- a/arch/mips/configs/nlm_xlr_defconfig +++ b/arch/mips/configs/nlm_xlr_defconfig @@ -8,7 +8,7 @@ CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT_VOLUNTARY=y CONFIG_KEXEC=y CONFIG_EXPERIMENTAL=y -CONFIG_CROSS_COMPILE="mips64-unknown-linux-gnu-" +CONFIG_CROSS_COMPILE="mips-linux-gnu-" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y @@ -22,15 +22,13 @@ CONFIG_AUDIT=y CONFIG_NAMESPACES=y CONFIG_SCHED_AUTOGROUP=y CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="usr/dev_file_list usr/rootfs" +CONFIG_INITRAMFS_SOURCE="usr/dev_file_list usr/rootfs.xlr" CONFIG_RD_BZIP2=y CONFIG_RD_LZMA=y CONFIG_INITRAMFS_COMPRESSION_GZIP=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EXPERT=y CONFIG_KALLSYMS_ALL=y # CONFIG_ELF_CORE is not set -# CONFIG_PCSPKR_PLATFORM is not set # CONFIG_PERF_EVENTS is not set # CONFIG_COMPAT_BRK is not set CONFIG_PROFILING=y @@ -39,6 +37,9 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_BLK_DEV_INTEGRITY=y +CONFIG_PCI=y +CONFIG_PCI_MSI=y +CONFIG_PCI_DEBUG=y CONFIG_BINFMT_MISC=m CONFIG_PM_RUNTIME=y CONFIG_PM_DEBUG=y @@ -297,12 +298,10 @@ CONFIG_NET_ACT_SIMP=m CONFIG_NET_ACT_SKBEDIT=m CONFIG_DCB=y CONFIG_NET_PKTGEN=m -# CONFIG_WIRELESS is not set CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y # CONFIG_STANDALONE is not set CONFIG_CONNECTOR=y -CONFIG_MTD=m CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_NBD=m @@ -339,6 +338,9 @@ CONFIG_SCSI_DH_EMC=m CONFIG_SCSI_DH_ALUA=m CONFIG_SCSI_OSD_INITIATOR=m CONFIG_SCSI_OSD_ULD=m +CONFIG_NETDEVICES=y +CONFIG_E1000E=y +CONFIG_SKY2=y # CONFIG_INPUT_MOUSEDEV is not set CONFIG_INPUT_EVDEV=y CONFIG_INPUT_EVBUG=m @@ -443,7 +445,6 @@ CONFIG_CIFS_UPCALL=y CONFIG_CIFS_XATTR=y CONFIG_CIFS_POSIX=y CONFIG_CIFS_DFS_UPCALL=y -CONFIG_CIFS_EXPERIMENTAL=y CONFIG_NCP_FS=m CONFIG_NCPFS_PACKET_SIGNING=y CONFIG_NCPFS_IOCTL_LOCKING=y @@ -516,7 +517,6 @@ CONFIG_PRINTK_TIME=y # CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_UNUSED_SYMBOLS=y -CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_HUNG_TASK=y CONFIG_SCHEDSTATS=y CONFIG_TIMER_STATS=y diff --git a/arch/mips/configs/pb1200_defconfig b/arch/mips/configs/pb1200_defconfig deleted file mode 100644 index dcbe2704e5e..00000000000 --- a/arch/mips/configs/pb1200_defconfig +++ /dev/null @@ -1,170 +0,0 @@ -CONFIG_MIPS_ALCHEMY=y -CONFIG_MIPS_PB1200=y -CONFIG_KSM=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_HZ_100=y -# CONFIG_SECCOMP is not set -CONFIG_EXPERIMENTAL=y -CONFIG_LOCALVERSION="-pb1200" -CONFIG_KERNEL_LZMA=y -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_TINY_RCU=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_EXPERT=y -# CONFIG_SYSCTL_SYSCALL is not set -# CONFIG_KALLSYMS is not set -# CONFIG_PCSPKR_PLATFORM is not set -# CONFIG_VM_EVENT_COUNTERS is not set -# CONFIG_COMPAT_BRK is not set -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_LBDAF is not set -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_PCCARD=y -CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y -CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y -CONFIG_BINFMT_MISC=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_PNP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -# CONFIG_WIRELESS is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_PLATFORM=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_UB=y -# CONFIG_MISC_DEVICES is not set -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECS=y -CONFIG_BLK_DEV_IDECD=y -CONFIG_IDE_TASK_IOCTL=y -# CONFIG_IDE_PROC_FS is not set -CONFIG_BLK_DEV_IDE_AU1XXX=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_SMC91X=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_WLAN is not set -# CONFIG_INPUT_MOUSEDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_VT_HW_CONSOLE_BINDING=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=2 -CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -# CONFIG_LEGACY_PTYS is not set -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -# CONFIG_I2C_COMPAT is not set -CONFIG_I2C_CHARDEV=y -# CONFIG_I2C_HELPER_AUTO is not set -CONFIG_I2C_AU1550=y -CONFIG_SPI=y -CONFIG_SPI_AU1550=y -CONFIG_GPIOLIB=y -CONFIG_GPIO_SYSFS=y -CONFIG_SENSORS_ADM1025=y -CONFIG_SENSORS_LM70=y -CONFIG_FB=y -CONFIG_FB_AU1200=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FONTS=y -CONFIG_FONT_8x16=y -CONFIG_SOUND=y -CONFIG_SND=y -CONFIG_SND_DYNAMIC_MINORS=y -# CONFIG_SND_SUPPORT_OLD_API is not set -# CONFIG_SND_VERBOSE_PROCFS is not set -# CONFIG_SND_DRIVERS is not set -# CONFIG_SND_SPI is not set -# CONFIG_SND_MIPS is not set -# CONFIG_SND_USB is not set -# CONFIG_SND_PCMCIA is not set -CONFIG_SND_SOC=y -CONFIG_SND_SOC_AU1XPSC=y -CONFIG_SND_SOC_DB1200=y -CONFIG_HIDRAW=y -CONFIG_USB_HIDDEV=y -CONFIG_USB=y -CONFIG_USB_DEBUG=y -CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -# CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_DYNAMIC_MINORS=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_ROOT_HUB_TT=y -CONFIG_USB_OHCI_HCD=y -CONFIG_MMC=y -# CONFIG_MMC_BLOCK_BOUNCE is not set -CONFIG_MMC_AU1X=y -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_AU1XXX=y -CONFIG_EXT2_FS=y -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=y -CONFIG_VFAT_FS=y -# CONFIG_PROC_PAGE_MONITOR is not set -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_LZO=y -CONFIG_JFFS2_RUBIN=y -CONFIG_SQUASHFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_EFI_PARTITION=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_CODEPAGE_852=y -CONFIG_NLS_CODEPAGE_1250=y -CONFIG_NLS_ASCII=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_ISO8859_2=y -CONFIG_NLS_ISO8859_15=y -CONFIG_NLS_UTF8=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_MAGIC_SYSRQ=y -CONFIG_STRIP_ASM_SYMS=y -CONFIG_DEBUG_KERNEL=y -# CONFIG_SCHED_DEBUG is not set -# CONFIG_FTRACE is not set -CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="console=ttyS0,115200" -CONFIG_DEBUG_ZBOOT=y -CONFIG_KEYS=y -CONFIG_KEYS_DEBUG_PROC_KEYS=y -CONFIG_SECURITYFS=y diff --git a/arch/mips/dec/setup.c b/arch/mips/dec/setup.c index f7b7ba6d5c4..b874accd878 100644 --- a/arch/mips/dec/setup.c +++ b/arch/mips/dec/setup.c @@ -110,7 +110,6 @@ static struct irqaction fpuirq = { }; static struct irqaction busirq = { - .flags = IRQF_DISABLED, .name = "bus error", .flags = IRQF_NO_THREAD, }; diff --git a/arch/mips/include/asm/bmips.h b/arch/mips/include/asm/bmips.h new file mode 100644 index 00000000000..552a65a0cf2 --- /dev/null +++ b/arch/mips/include/asm/bmips.h @@ -0,0 +1,110 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2011 by Kevin Cernekee (cernekee@gmail.com) + * + * Definitions for BMIPS processors + */ +#ifndef _ASM_BMIPS_H +#define _ASM_BMIPS_H + +#include <linux/compiler.h> +#include <linux/linkage.h> +#include <asm/addrspace.h> +#include <asm/mipsregs.h> +#include <asm/hazards.h> + +/* NOTE: the CBR register returns a PA, and it can be above 0xff00_0000 */ +#define BMIPS_GET_CBR() ((void __iomem *)(CKSEG1 | \ + (unsigned long) \ + ((read_c0_brcm_cbr() >> 18) << 18))) + +#define BMIPS_RAC_CONFIG 0x00000000 +#define BMIPS_RAC_ADDRESS_RANGE 0x00000004 +#define BMIPS_RAC_CONFIG_1 0x00000008 +#define BMIPS_L2_CONFIG 0x0000000c +#define BMIPS_LMB_CONTROL 0x0000001c +#define BMIPS_SYSTEM_BASE 0x00000020 +#define BMIPS_PERF_GLOBAL_CONTROL 0x00020000 +#define BMIPS_PERF_CONTROL_0 0x00020004 +#define BMIPS_PERF_CONTROL_1 0x00020008 +#define BMIPS_PERF_COUNTER_0 0x00020010 +#define BMIPS_PERF_COUNTER_1 0x00020014 +#define BMIPS_PERF_COUNTER_2 0x00020018 +#define BMIPS_PERF_COUNTER_3 0x0002001c +#define BMIPS_RELO_VECTOR_CONTROL_0 0x00030000 +#define BMIPS_RELO_VECTOR_CONTROL_1 0x00038000 + +#define BMIPS_NMI_RESET_VEC 0x80000000 +#define BMIPS_WARM_RESTART_VEC 0x80000380 + +#define ZSCM_REG_BASE 0x97000000 + +#if !defined(__ASSEMBLY__) + +#include <linux/cpumask.h> +#include <asm/r4kcache.h> + +extern struct plat_smp_ops bmips_smp_ops; +extern char bmips_reset_nmi_vec; +extern char bmips_reset_nmi_vec_end; +extern char bmips_smp_movevec; +extern char bmips_smp_int_vec; +extern char bmips_smp_int_vec_end; + +extern int bmips_smp_enabled; +extern int bmips_cpu_offset; +extern cpumask_t bmips_booted_mask; + +extern void bmips_ebase_setup(void); +extern asmlinkage void plat_wired_tlb_setup(void); + +static inline unsigned long bmips_read_zscm_reg(unsigned int offset) +{ + unsigned long ret; + + __asm__ __volatile__( + ".set push\n" + ".set noreorder\n" + "cache %1, 0(%2)\n" + "sync\n" + "_ssnop\n" + "_ssnop\n" + "_ssnop\n" + "_ssnop\n" + "_ssnop\n" + "_ssnop\n" + "_ssnop\n" + "mfc0 %0, $28, 3\n" + "_ssnop\n" + ".set pop\n" + : "=&r" (ret) + : "i" (Index_Load_Tag_S), "r" (ZSCM_REG_BASE + offset) + : "memory"); + return ret; +} + +static inline void bmips_write_zscm_reg(unsigned int offset, unsigned long data) +{ + __asm__ __volatile__( + ".set push\n" + ".set noreorder\n" + "mtc0 %0, $28, 3\n" + "_ssnop\n" + "_ssnop\n" + "_ssnop\n" + "cache %1, 0(%2)\n" + "_ssnop\n" + "_ssnop\n" + "_ssnop\n" + : /* no outputs */ + : "r" (data), + "i" (Index_Store_Tag_S), "r" (ZSCM_REG_BASE + offset) + : "memory"); +} + +#endif /* !defined(__ASSEMBLY__) */ + +#endif /* _ASM_BMIPS_H */ diff --git a/arch/mips/include/asm/bootinfo.h b/arch/mips/include/asm/bootinfo.h index 35cd1bab69c..7a51d879e6c 100644 --- a/arch/mips/include/asm/bootinfo.h +++ b/arch/mips/include/asm/bootinfo.h @@ -86,6 +86,7 @@ extern unsigned long mips_machtype; #define BOOT_MEM_RAM 1 #define BOOT_MEM_ROM_DATA 2 #define BOOT_MEM_RESERVED 3 +#define BOOT_MEM_INIT_RAM 4 /* * A memory map that's built upon what was determined diff --git a/arch/mips/include/asm/branch.h b/arch/mips/include/asm/branch.h index 37c6857c8d4..888766ae1f8 100644 --- a/arch/mips/include/asm/branch.h +++ b/arch/mips/include/asm/branch.h @@ -9,6 +9,7 @@ #define _ASM_BRANCH_H #include <asm/ptrace.h> +#include <asm/inst.h> static inline int delay_slot(struct pt_regs *regs) { @@ -23,7 +24,11 @@ static inline unsigned long exception_epc(struct pt_regs *regs) return regs->cp0_epc + 4; } +#define BRANCH_LIKELY_TAKEN 0x0001 + extern int __compute_return_epc(struct pt_regs *regs); +extern int __compute_return_epc_for_insn(struct pt_regs *regs, + union mips_instruction insn); static inline int compute_return_epc(struct pt_regs *regs) { diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h index 2f7f41873f2..f9fa2a479dd 100644 --- a/arch/mips/include/asm/cpu.h +++ b/arch/mips/include/asm/cpu.h @@ -169,6 +169,10 @@ #define PRID_IMP_NETLOGIC_XLS412B 0x4c00 #define PRID_IMP_NETLOGIC_XLS408B 0x4e00 #define PRID_IMP_NETLOGIC_XLS404B 0x4f00 +#define PRID_IMP_NETLOGIC_AU13XX 0x8000 + +#define PRID_IMP_NETLOGIC_XLP8XX 0x1000 +#define PRID_IMP_NETLOGIC_XLP3XX 0x1100 /* * Definitions for 7:0 on legacy processors @@ -263,7 +267,7 @@ enum cpu_type_enum { */ CPU_5KC, CPU_20KC, CPU_25KF, CPU_SB1, CPU_SB1A, CPU_LOONGSON2, CPU_CAVIUM_OCTEON, CPU_CAVIUM_OCTEON_PLUS, CPU_CAVIUM_OCTEON2, - CPU_XLR, + CPU_XLR, CPU_XLP, CPU_LAST }; diff --git a/arch/mips/include/asm/gio_device.h b/arch/mips/include/asm/gio_device.h new file mode 100644 index 00000000000..5437c84664b --- /dev/null +++ b/arch/mips/include/asm/gio_device.h @@ -0,0 +1,56 @@ +#include <linux/device.h> +#include <linux/mod_devicetable.h> + +struct gio_device_id { + __u8 id; +}; + +struct gio_device { + struct device dev; + struct resource resource; + unsigned int irq; + unsigned int slotno; + + const char *name; + struct gio_device_id id; + unsigned id32:1; + unsigned gio64:1; +}; +#define to_gio_device(d) container_of(d, struct gio_device, dev) + +struct gio_driver { + const char *name; + struct module *owner; + const struct gio_device_id *id_table; + + int (*probe)(struct gio_device *, const struct gio_device_id *); + void (*remove)(struct gio_device *); + int (*suspend)(struct gio_device *, pm_message_t); + int (*resume)(struct gio_device *); + void (*shutdown)(struct gio_device *); + + struct device_driver driver; +}; +#define to_gio_driver(drv) container_of(drv, struct gio_driver, driver) + +extern const struct gio_device_id *gio_match_device(const struct gio_device_id *, + const struct gio_device *); +extern struct gio_device *gio_dev_get(struct gio_device *); +extern void gio_dev_put(struct gio_device *); + +extern int gio_device_register(struct gio_device *); +extern void gio_device_unregister(struct gio_device *); +extern void gio_release_dev(struct device *); + +static inline void gio_device_free(struct gio_device *dev) +{ + gio_release_dev(&dev->dev); +} + +extern int gio_register_driver(struct gio_driver *); +extern void gio_unregister_driver(struct gio_driver *); + +#define gio_get_drvdata(_dev) drv_get_drvdata(&(_dev)->dev) +#define gio_set_drvdata(_dev, data) drv_set_drvdata(&(_dev)->dev, (data)) + +extern void gio_set_master(struct gio_device *); diff --git a/arch/mips/include/asm/hazards.h b/arch/mips/include/asm/hazards.h index 4e332165d7b..b4c20e4f87c 100644 --- a/arch/mips/include/asm/hazards.h +++ b/arch/mips/include/asm/hazards.h @@ -87,7 +87,8 @@ do { \ : "=r" (tmp)); \ } while (0) -#elif defined(CONFIG_CPU_MIPSR1) && !defined(CONFIG_MIPS_ALCHEMY) +#elif (defined(CONFIG_CPU_MIPSR1) && !defined(CONFIG_MIPS_ALCHEMY)) || \ + defined(CONFIG_CPU_BMIPS) /* * These are slightly complicated by the fact that we guarantee R1 kernels to @@ -139,8 +140,8 @@ do { \ } while (0) #elif defined(CONFIG_MIPS_ALCHEMY) || defined(CONFIG_CPU_CAVIUM_OCTEON) || \ - defined(CONFIG_CPU_LOONGSON2) || defined(CONFIG_CPU_R10000) || \ - defined(CONFIG_CPU_R5500) + defined(CONFIG_CPU_LOONGSON2) || defined(CONFIG_CPU_R10000) || \ + defined(CONFIG_CPU_R5500) /* * R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer. diff --git a/arch/mips/include/asm/hugetlb.h b/arch/mips/include/asm/hugetlb.h index c565b7c3f0b..58d36889f09 100644 --- a/arch/mips/include/asm/hugetlb.h +++ b/arch/mips/include/asm/hugetlb.h @@ -70,7 +70,7 @@ static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm, static inline void huge_ptep_clear_flush(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep) { - flush_tlb_mm(vma->vm_mm); + flush_tlb_page(vma, addr & huge_page_mask(hstate_vma(vma))); } static inline int huge_pte_none(pte_t pte) diff --git a/arch/mips/include/asm/kprobes.h b/arch/mips/include/asm/kprobes.h index e6ea4d4d720..1fbbca01e68 100644 --- a/arch/mips/include/asm/kprobes.h +++ b/arch/mips/include/asm/kprobes.h @@ -74,6 +74,8 @@ struct prev_kprobe { : MAX_JPROBES_STACK_SIZE) +#define SKIP_DELAYSLOT 0x0001 + /* per-cpu kprobe control block */ struct kprobe_ctlblk { unsigned long kprobe_status; @@ -82,6 +84,9 @@ struct kprobe_ctlblk { unsigned long kprobe_saved_epc; unsigned long jprobe_saved_sp; struct pt_regs jprobe_saved_regs; + /* Per-thread fields, used while emulating branches */ + unsigned long flags; + unsigned long target_epc; u8 jprobes_stack[MAX_JPROBES_STACK_SIZE]; struct prev_kprobe prev_kprobe; }; diff --git a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h index cda1c8070b2..2f0becb4ec8 100644 --- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h +++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h @@ -20,6 +20,10 @@ #include <linux/bitops.h> #define AR71XX_APB_BASE 0x18000000 +#define AR71XX_EHCI_BASE 0x1b000000 +#define AR71XX_EHCI_SIZE 0x1000 +#define AR71XX_OHCI_BASE 0x1c000000 +#define AR71XX_OHCI_SIZE 0x1000 #define AR71XX_SPI_BASE 0x1f000000 #define AR71XX_SPI_SIZE 0x01000000 @@ -27,6 +31,8 @@ #define AR71XX_DDR_CTRL_SIZE 0x100 #define AR71XX_UART_BASE (AR71XX_APB_BASE + 0x00020000) #define AR71XX_UART_SIZE 0x100 +#define AR71XX_USB_CTRL_BASE (AR71XX_APB_BASE + 0x00030000) +#define AR71XX_USB_CTRL_SIZE 0x100 #define AR71XX_GPIO_BASE (AR71XX_APB_BASE + 0x00040000) #define AR71XX_GPIO_SIZE 0x100 #define AR71XX_PLL_BASE (AR71XX_APB_BASE + 0x00050000) @@ -34,9 +40,26 @@ #define AR71XX_RESET_BASE (AR71XX_APB_BASE + 0x00060000) #define AR71XX_RESET_SIZE 0x100 +#define AR7240_USB_CTRL_BASE (AR71XX_APB_BASE + 0x00030000) +#define AR7240_USB_CTRL_SIZE 0x100 +#define AR7240_OHCI_BASE 0x1b000000 +#define AR7240_OHCI_SIZE 0x1000 + +#define AR724X_EHCI_BASE 0x1b000000 +#define AR724X_EHCI_SIZE 0x1000 + +#define AR913X_EHCI_BASE 0x1b000000 +#define AR913X_EHCI_SIZE 0x1000 #define AR913X_WMAC_BASE (AR71XX_APB_BASE + 0x000C0000) #define AR913X_WMAC_SIZE 0x30000 +#define AR933X_UART_BASE (AR71XX_APB_BASE + 0x00020000) +#define AR933X_UART_SIZE 0x14 +#define AR933X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000) +#define AR933X_WMAC_SIZE 0x20000 +#define AR933X_EHCI_BASE 0x1b000000 +#define AR933X_EHCI_SIZE 0x1000 + /* * DDR_CTRL block */ @@ -63,6 +86,11 @@ #define AR913X_DDR_REG_FLUSH_USB 0x84 #define AR913X_DDR_REG_FLUSH_WMAC 0x88 +#define AR933X_DDR_REG_FLUSH_GE0 0x7c +#define AR933X_DDR_REG_FLUSH_GE1 0x80 +#define AR933X_DDR_REG_FLUSH_USB 0x84 +#define AR933X_DDR_REG_FLUSH_WMAC 0x88 + /* * PLL block */ @@ -104,6 +132,30 @@ #define AR913X_AHB_DIV_SHIFT 19 #define AR913X_AHB_DIV_MASK 0x1 +#define AR933X_PLL_CPU_CONFIG_REG 0x00 +#define AR933X_PLL_CLOCK_CTRL_REG 0x08 + +#define AR933X_PLL_CPU_CONFIG_NINT_SHIFT 10 +#define AR933X_PLL_CPU_CONFIG_NINT_MASK 0x3f +#define AR933X_PLL_CPU_CONFIG_REFDIV_SHIFT 16 +#define AR933X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f +#define AR933X_PLL_CPU_CONFIG_OUTDIV_SHIFT 23 +#define AR933X_PLL_CPU_CONFIG_OUTDIV_MASK 0x7 + +#define AR933X_PLL_CLOCK_CTRL_BYPASS BIT(2) +#define AR933X_PLL_CLOCK_CTRL_CPU_DIV_SHIFT 5 +#define AR933X_PLL_CLOCK_CTRL_CPU_DIV_MASK 0x3 +#define AR933X_PLL_CLOCK_CTRL_DDR_DIV_SHIFT 10 +#define AR933X_PLL_CLOCK_CTRL_DDR_DIV_MASK 0x3 +#define AR933X_PLL_CLOCK_CTRL_AHB_DIV_SHIFT 15 +#define AR933X_PLL_CLOCK_CTRL_AHB_DIV_MASK 0x7 + +/* + * USB_CONFIG block + */ +#define AR71XX_USB_CTRL_REG_FLADJ 0x00 +#define AR71XX_USB_CTRL_REG_CONFIG 0x04 + /* * RESET block */ @@ -130,6 +182,13 @@ #define AR724X_RESET_REG_RESET_MODULE 0x1c +#define AR933X_RESET_REG_RESET_MODULE 0x1c +#define AR933X_RESET_REG_BOOTSTRAP 0xac + +#define MISC_INT_ETHSW BIT(12) +#define MISC_INT_TIMER4 BIT(10) +#define MISC_INT_TIMER3 BIT(9) +#define MISC_INT_TIMER2 BIT(8) #define MISC_INT_DMA BIT(7) #define MISC_INT_OHCI BIT(6) #define MISC_INT_PERFC BIT(5) @@ -158,14 +217,29 @@ #define AR71XX_RESET_PCI_BUS BIT(1) #define AR71XX_RESET_PCI_CORE BIT(0) +#define AR7240_RESET_USB_HOST BIT(5) +#define AR7240_RESET_OHCI_DLL BIT(3) + #define AR724X_RESET_GE1_MDIO BIT(23) #define AR724X_RESET_GE0_MDIO BIT(22) #define AR724X_RESET_PCIE_PHY_SERIAL BIT(10) #define AR724X_RESET_PCIE_PHY BIT(7) #define AR724X_RESET_PCIE BIT(6) -#define AR724X_RESET_OHCI_DLL BIT(3) +#define AR724X_RESET_USB_HOST BIT(5) +#define AR724X_RESET_USB_PHY BIT(4) +#define AR724X_RESET_USBSUS_OVERRIDE BIT(3) #define AR913X_RESET_AMBA2WMAC BIT(22) +#define AR913X_RESET_USBSUS_OVERRIDE BIT(10) +#define AR913X_RESET_USB_HOST BIT(5) +#define AR913X_RESET_USB_PHY BIT(4) + +#define AR933X_RESET_WMAC BIT(11) +#define AR933X_RESET_USB_HOST BIT(5) +#define AR933X_RESET_USB_PHY BIT(4) +#define AR933X_RESET_USBSUS_OVERRIDE BIT(3) + +#define AR933X_BOOTSTRAP_REF_CLK_40 BIT(0) #define REV_ID_MAJOR_MASK 0xfff0 #define REV_ID_MAJOR_AR71XX 0x00a0 @@ -173,6 +247,8 @@ #define REV_ID_MAJOR_AR7240 0x00c0 #define REV_ID_MAJOR_AR7241 0x0100 #define REV_ID_MAJOR_AR7242 0x1100 +#define REV_ID_MAJOR_AR9330 0x0110 +#define REV_ID_MAJOR_AR9331 0x1110 #define AR71XX_REV_ID_MINOR_MASK 0x3 #define AR71XX_REV_ID_MINOR_AR7130 0x0 @@ -187,6 +263,8 @@ #define AR913X_REV_ID_REVISION_MASK 0x3 #define AR913X_REV_ID_REVISION_SHIFT 2 +#define AR933X_REV_ID_REVISION_MASK 0x3 + #define AR724X_REV_ID_REVISION_MASK 0x3 /* @@ -229,5 +307,6 @@ #define AR71XX_GPIO_COUNT 16 #define AR724X_GPIO_COUNT 18 #define AR913X_GPIO_COUNT 22 +#define AR933X_GPIO_COUNT 30 #endif /* __ASM_MACH_AR71XX_REGS_H */ diff --git a/arch/mips/include/asm/mach-ath79/ar933x_uart.h b/arch/mips/include/asm/mach-ath79/ar933x_uart.h new file mode 100644 index 00000000000..52730555937 --- /dev/null +++ b/arch/mips/include/asm/mach-ath79/ar933x_uart.h @@ -0,0 +1,67 @@ +/* + * Atheros AR933X UART defines + * + * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef __AR933X_UART_H +#define __AR933X_UART_H + +#define AR933X_UART_REGS_SIZE 20 +#define AR933X_UART_FIFO_SIZE 16 + +#define AR933X_UART_DATA_REG 0x00 +#define AR933X_UART_CS_REG 0x04 +#define AR933X_UART_CLOCK_REG 0x08 +#define AR933X_UART_INT_REG 0x0c +#define AR933X_UART_INT_EN_REG 0x10 + +#define AR933X_UART_DATA_TX_RX_MASK 0xff +#define AR933X_UART_DATA_RX_CSR BIT(8) +#define AR933X_UART_DATA_TX_CSR BIT(9) + +#define AR933X_UART_CS_PARITY_S 0 +#define AR933X_UART_CS_PARITY_M 0x3 +#define AR933X_UART_CS_PARITY_NONE 0 +#define AR933X_UART_CS_PARITY_ODD 1 +#define AR933X_UART_CS_PARITY_EVEN 2 +#define AR933X_UART_CS_IF_MODE_S 2 +#define AR933X_UART_CS_IF_MODE_M 0x3 +#define AR933X_UART_CS_IF_MODE_NONE 0 +#define AR933X_UART_CS_IF_MODE_DTE 1 +#define AR933X_UART_CS_IF_MODE_DCE 2 +#define AR933X_UART_CS_FLOW_CTRL_S 4 +#define AR933X_UART_CS_FLOW_CTRL_M 0x3 +#define AR933X_UART_CS_DMA_EN BIT(6) +#define AR933X_UART_CS_TX_READY_ORIDE BIT(7) +#define AR933X_UART_CS_RX_READY_ORIDE BIT(8) +#define AR933X_UART_CS_TX_READY BIT(9) +#define AR933X_UART_CS_RX_BREAK BIT(10) +#define AR933X_UART_CS_TX_BREAK BIT(11) +#define AR933X_UART_CS_HOST_INT BIT(12) +#define AR933X_UART_CS_HOST_INT_EN BIT(13) +#define AR933X_UART_CS_TX_BUSY BIT(14) +#define AR933X_UART_CS_RX_BUSY BIT(15) + +#define AR933X_UART_CLOCK_STEP_M 0xffff +#define AR933X_UART_CLOCK_SCALE_M 0xfff +#define AR933X_UART_CLOCK_SCALE_S 16 +#define AR933X_UART_CLOCK_STEP_M 0xffff + +#define AR933X_UART_INT_RX_VALID BIT(0) +#define AR933X_UART_INT_TX_READY BIT(1) +#define AR933X_UART_INT_RX_FRAMING_ERR BIT(2) +#define AR933X_UART_INT_RX_OFLOW_ERR BIT(3) +#define AR933X_UART_INT_TX_OFLOW_ERR BIT(4) +#define AR933X_UART_INT_RX_PARITY_ERR BIT(5) +#define AR933X_UART_INT_RX_BREAK_ON BIT(6) +#define AR933X_UART_INT_RX_BREAK_OFF BIT(7) +#define AR933X_UART_INT_RX_FULL BIT(8) +#define AR933X_UART_INT_TX_EMPTY BIT(9) +#define AR933X_UART_INT_ALLINTS 0x3ff + +#endif /* __AR933X_UART_H */ diff --git a/arch/mips/include/asm/mach-ath79/ar933x_uart_platform.h b/arch/mips/include/asm/mach-ath79/ar933x_uart_platform.h new file mode 100644 index 00000000000..6cb30f2b719 --- /dev/null +++ b/arch/mips/include/asm/mach-ath79/ar933x_uart_platform.h @@ -0,0 +1,18 @@ +/* + * Platform data definition for Atheros AR933X UART + * + * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _AR933X_UART_PLATFORM_H +#define _AR933X_UART_PLATFORM_H + +struct ar933x_uart_platform_data { + unsigned uartclk; +}; + +#endif /* _AR933X_UART_PLATFORM_H */ diff --git a/arch/mips/include/asm/mach-ath79/ath79.h b/arch/mips/include/asm/mach-ath79/ath79.h index 6a9f168506f..6d0c6c9d562 100644 --- a/arch/mips/include/asm/mach-ath79/ath79.h +++ b/arch/mips/include/asm/mach-ath79/ath79.h @@ -26,10 +26,13 @@ enum ath79_soc_type { ATH79_SOC_AR7241, ATH79_SOC_AR7242, ATH79_SOC_AR9130, - ATH79_SOC_AR9132 + ATH79_SOC_AR9132, + ATH79_SOC_AR9330, + ATH79_SOC_AR9331, }; extern enum ath79_soc_type ath79_soc; +extern unsigned int ath79_soc_rev; static inline int soc_is_ar71xx(void) { @@ -66,6 +69,12 @@ static inline int soc_is_ar913x(void) ath79_soc == ATH79_SOC_AR9132); } +static inline int soc_is_ar933x(void) +{ + return (ath79_soc == ATH79_SOC_AR9330 || + ath79_soc == ATH79_SOC_AR9331); +} + extern void __iomem *ath79_ddr_base; extern void __iomem *ath79_pll_base; extern void __iomem *ath79_reset_base; diff --git a/arch/mips/include/asm/mach-ath79/irq.h b/arch/mips/include/asm/mach-ath79/irq.h index 189bc6eb9c1..519958fe4e3 100644 --- a/arch/mips/include/asm/mach-ath79/irq.h +++ b/arch/mips/include/asm/mach-ath79/irq.h @@ -10,10 +10,10 @@ #define __ASM_MACH_ATH79_IRQ_H #define MIPS_CPU_IRQ_BASE 0 -#define NR_IRQS 16 +#define NR_IRQS 40 #define ATH79_MISC_IRQ_BASE 8 -#define ATH79_MISC_IRQ_COUNT 8 +#define ATH79_MISC_IRQ_COUNT 32 #define ATH79_CPU_IRQ_IP2 (MIPS_CPU_IRQ_BASE + 2) #define ATH79_CPU_IRQ_USB (MIPS_CPU_IRQ_BASE + 3) @@ -30,6 +30,10 @@ #define ATH79_MISC_IRQ_PERFC (ATH79_MISC_IRQ_BASE + 5) #define ATH79_MISC_IRQ_OHCI (ATH79_MISC_IRQ_BASE + 6) #define ATH79_MISC_IRQ_DMA (ATH79_MISC_IRQ_BASE + 7) +#define ATH79_MISC_IRQ_TIMER2 (ATH79_MISC_IRQ_BASE + 8) +#define ATH79_MISC_IRQ_TIMER3 (ATH79_MISC_IRQ_BASE + 9) +#define ATH79_MISC_IRQ_TIMER4 (ATH79_MISC_IRQ_BASE + 10) +#define ATH79_MISC_IRQ_ETHSW (ATH79_MISC_IRQ_BASE + 12) #include_next <irq.h> diff --git a/arch/mips/include/asm/mach-ath79/pci-ath724x.h b/arch/mips/include/asm/mach-ath79/pci-ath724x.h new file mode 100644 index 00000000000..454885fa30c --- /dev/null +++ b/arch/mips/include/asm/mach-ath79/pci-ath724x.h @@ -0,0 +1,21 @@ +/* + * Atheros 724x PCI support + * + * Copyright (C) 2011 RenĂ© Bolldorf <xsecute@googlemail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef __ASM_MACH_ATH79_PCI_ATH724X_H +#define __ASM_MACH_ATH79_PCI_ATH724X_H + +struct ath724x_pci_data { + int irq; + void *pdata; +}; + +void ath724x_pci_add_data(struct ath724x_pci_data *data, int size); + +#endif /* __ASM_MACH_ATH79_PCI_ATH724X_H */ diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h index de24ec57dd2..569828d3cca 100644 --- a/arch/mips/include/asm/mach-au1x00/au1000.h +++ b/arch/mips/include/asm/mach-au1x00/au1000.h @@ -136,6 +136,7 @@ static inline int au1xxx_cpu_needs_config_od(void) #define ALCHEMY_CPU_AU1100 2 #define ALCHEMY_CPU_AU1550 3 #define ALCHEMY_CPU_AU1200 4 +#define ALCHEMY_CPU_AU1300 5 static inline int alchemy_get_cputype(void) { @@ -156,6 +157,9 @@ static inline int alchemy_get_cputype(void) case 0x05030000: return ALCHEMY_CPU_AU1200; break; + case 0x800c0000: + return ALCHEMY_CPU_AU1300; + break; } return ALCHEMY_CPU_UNKNOWN; @@ -166,6 +170,7 @@ static inline int alchemy_get_uarts(int type) { switch (type) { case ALCHEMY_CPU_AU1000: + case ALCHEMY_CPU_AU1300: return 4; case ALCHEMY_CPU_AU1500: case ALCHEMY_CPU_AU1200: @@ -243,6 +248,7 @@ extern unsigned long au1xxx_calc_clock(void); /* PM: arch/mips/alchemy/common/sleeper.S, power.c, irq.c */ void alchemy_sleep_au1000(void); void alchemy_sleep_au1550(void); +void alchemy_sleep_au1300(void); void au_sleep(void); /* USB: drivers/usb/host/alchemy-common.c */ @@ -251,6 +257,7 @@ enum alchemy_usb_block { ALCHEMY_USB_UDC0, ALCHEMY_USB_EHCI0, ALCHEMY_USB_OTG0, + ALCHEMY_USB_OHCI1, }; int alchemy_usb_control(int block, int enable); @@ -263,14 +270,92 @@ struct alchemy_pci_platdata { unsigned long pci_cfg_clr; }; -/* SOC Interrupt numbers */ +/* Multifunction pins: Each of these pins can either be assigned to the + * GPIO controller or a on-chip peripheral. + * Call "au1300_pinfunc_to_dev()" or "au1300_pinfunc_to_gpio()" to + * assign one of these to either the GPIO controller or the device. + */ +enum au1300_multifunc_pins { + /* wake-from-str pins 0-3 */ + AU1300_PIN_WAKE0 = 0, AU1300_PIN_WAKE1, AU1300_PIN_WAKE2, + AU1300_PIN_WAKE3, + /* external clock sources for PSCs: 4-5 */ + AU1300_PIN_EXTCLK0, AU1300_PIN_EXTCLK1, + /* 8bit MMC interface on SD0: 6-9 */ + AU1300_PIN_SD0DAT4, AU1300_PIN_SD0DAT5, AU1300_PIN_SD0DAT6, + AU1300_PIN_SD0DAT7, + /* aux clk input for freqgen 3: 10 */ + AU1300_PIN_FG3AUX, + /* UART1 pins: 11-18 */ + AU1300_PIN_U1RI, AU1300_PIN_U1DCD, AU1300_PIN_U1DSR, + AU1300_PIN_U1CTS, AU1300_PIN_U1RTS, AU1300_PIN_U1DTR, + AU1300_PIN_U1RX, AU1300_PIN_U1TX, + /* UART0 pins: 19-24 */ + AU1300_PIN_U0RI, AU1300_PIN_U0DCD, AU1300_PIN_U0DSR, + AU1300_PIN_U0CTS, AU1300_PIN_U0RTS, AU1300_PIN_U0DTR, + /* UART2: 25-26 */ + AU1300_PIN_U2RX, AU1300_PIN_U2TX, + /* UART3: 27-28 */ + AU1300_PIN_U3RX, AU1300_PIN_U3TX, + /* LCD controller PWMs, ext pixclock: 29-31 */ + AU1300_PIN_LCDPWM0, AU1300_PIN_LCDPWM1, AU1300_PIN_LCDCLKIN, + /* SD1 interface: 32-37 */ + AU1300_PIN_SD1DAT0, AU1300_PIN_SD1DAT1, AU1300_PIN_SD1DAT2, + AU1300_PIN_SD1DAT3, AU1300_PIN_SD1CMD, AU1300_PIN_SD1CLK, + /* SD2 interface: 38-43 */ + AU1300_PIN_SD2DAT0, AU1300_PIN_SD2DAT1, AU1300_PIN_SD2DAT2, + AU1300_PIN_SD2DAT3, AU1300_PIN_SD2CMD, AU1300_PIN_SD2CLK, + /* PSC0/1 clocks: 44-45 */ + AU1300_PIN_PSC0CLK, AU1300_PIN_PSC1CLK, + /* PSCs: 46-49/50-53/54-57/58-61 */ + AU1300_PIN_PSC0SYNC0, AU1300_PIN_PSC0SYNC1, AU1300_PIN_PSC0D0, + AU1300_PIN_PSC0D1, + AU1300_PIN_PSC1SYNC0, AU1300_PIN_PSC1SYNC1, AU1300_PIN_PSC1D0, + AU1300_PIN_PSC1D1, + AU1300_PIN_PSC2SYNC0, AU1300_PIN_PSC2SYNC1, AU1300_PIN_PSC2D0, + AU1300_PIN_PSC2D1, + AU1300_PIN_PSC3SYNC0, AU1300_PIN_PSC3SYNC1, AU1300_PIN_PSC3D0, + AU1300_PIN_PSC3D1, + /* PCMCIA interface: 62-70 */ + AU1300_PIN_PCE2, AU1300_PIN_PCE1, AU1300_PIN_PIOS16, + AU1300_PIN_PIOR, AU1300_PIN_PWE, AU1300_PIN_PWAIT, + AU1300_PIN_PREG, AU1300_PIN_POE, AU1300_PIN_PIOW, + /* camera interface H/V sync inputs: 71-72 */ + AU1300_PIN_CIMLS, AU1300_PIN_CIMFS, + /* PSC2/3 clocks: 73-74 */ + AU1300_PIN_PSC2CLK, AU1300_PIN_PSC3CLK, +}; + +/* GPIC (Au1300) pin management: arch/mips/alchemy/common/gpioint.c */ +extern void au1300_pinfunc_to_gpio(enum au1300_multifunc_pins gpio); +extern void au1300_pinfunc_to_dev(enum au1300_multifunc_pins gpio); +extern void au1300_set_irq_priority(unsigned int irq, int p); +extern void au1300_set_dbdma_gpio(int dchan, unsigned int gpio); + +/* Au1300 allows to disconnect certain blocks from internal power supply */ +enum au1300_vss_block { + AU1300_VSS_MPE = 0, + AU1300_VSS_BSA, + AU1300_VSS_GPE, + AU1300_VSS_MGP, +}; +extern void au1300_vss_block_control(int block, int enable); + + +/* SOC Interrupt numbers */ +/* Au1000-style (IC0/1): 2 controllers with 32 sources each */ #define AU1000_INTC0_INT_BASE (MIPS_CPU_IRQ_BASE + 8) #define AU1000_INTC0_INT_LAST (AU1000_INTC0_INT_BASE + 31) #define AU1000_INTC1_INT_BASE (AU1000_INTC0_INT_LAST + 1) #define AU1000_INTC1_INT_LAST (AU1000_INTC1_INT_BASE + 31) #define AU1000_MAX_INTR AU1000_INTC1_INT_LAST +/* Au1300-style (GPIC): 1 controller with up to 128 sources */ +#define ALCHEMY_GPIC_INT_BASE (MIPS_CPU_IRQ_BASE + 8) +#define ALCHEMY_GPIC_INT_NUM 128 +#define ALCHEMY_GPIC_INT_LAST (ALCHEMY_GPIC_INT_BASE + ALCHEMY_GPIC_INT_NUM - 1) + enum soc_au1000_ints { AU1000_FIRST_INT = AU1000_INTC0_INT_BASE, AU1000_UART0_INT = AU1000_FIRST_INT, @@ -591,24 +676,77 @@ enum soc_au1200_ints { #endif /* !defined (_LANGUAGE_ASSEMBLY) */ +/* Au1300 peripheral interrupt numbers */ +#define AU1300_FIRST_INT (ALCHEMY_GPIC_INT_BASE) +#define AU1300_UART1_INT (AU1300_FIRST_INT + 17) +#define AU1300_UART2_INT (AU1300_FIRST_INT + 25) +#define AU1300_UART3_INT (AU1300_FIRST_INT + 27) +#define AU1300_SD1_INT (AU1300_FIRST_INT + 32) +#define AU1300_SD2_INT (AU1300_FIRST_INT + 38) +#define AU1300_PSC0_INT (AU1300_FIRST_INT + 48) +#define AU1300_PSC1_INT (AU1300_FIRST_INT + 52) +#define AU1300_PSC2_INT (AU1300_FIRST_INT + 56) +#define AU1300_PSC3_INT (AU1300_FIRST_INT + 60) +#define AU1300_NAND_INT (AU1300_FIRST_INT + 62) +#define AU1300_DDMA_INT (AU1300_FIRST_INT + 75) +#define AU1300_MMU_INT (AU1300_FIRST_INT + 76) +#define AU1300_MPU_INT (AU1300_FIRST_INT + 77) +#define AU1300_GPU_INT (AU1300_FIRST_INT + 78) +#define AU1300_UDMA_INT (AU1300_FIRST_INT + 79) +#define AU1300_TOY_INT (AU1300_FIRST_INT + 80) +#define AU1300_TOY_MATCH0_INT (AU1300_FIRST_INT + 81) +#define AU1300_TOY_MATCH1_INT (AU1300_FIRST_INT + 82) +#define AU1300_TOY_MATCH2_INT (AU1300_FIRST_INT + 83) +#define AU1300_RTC_INT (AU1300_FIRST_INT + 84) +#define AU1300_RTC_MATCH0_INT (AU1300_FIRST_INT + 85) +#define AU1300_RTC_MATCH1_INT (AU1300_FIRST_INT + 86) +#define AU1300_RTC_MATCH2_INT (AU1300_FIRST_INT + 87) +#define AU1300_UART0_INT (AU1300_FIRST_INT + 88) +#define AU1300_SD0_INT (AU1300_FIRST_INT + 89) +#define AU1300_USB_INT (AU1300_FIRST_INT + 90) +#define AU1300_LCD_INT (AU1300_FIRST_INT + 91) +#define AU1300_BSA_INT (AU1300_FIRST_INT + 92) +#define AU1300_MPE_INT (AU1300_FIRST_INT + 93) +#define AU1300_ITE_INT (AU1300_FIRST_INT + 94) +#define AU1300_AES_INT (AU1300_FIRST_INT + 95) +#define AU1300_CIM_INT (AU1300_FIRST_INT + 96) + +/**********************************************************************/ + /* * Physical base addresses for integrated peripherals - * 0..au1000 1..au1500 2..au1100 3..au1550 4..au1200 + * 0..au1000 1..au1500 2..au1100 3..au1550 4..au1200 5..au1300 */ #define AU1000_AC97_PHYS_ADDR 0x10000000 /* 012 */ +#define AU1300_ROM_PHYS_ADDR 0x10000000 /* 5 */ +#define AU1300_OTP_PHYS_ADDR 0x10002000 /* 5 */ +#define AU1300_VSS_PHYS_ADDR 0x10003000 /* 5 */ +#define AU1300_UART0_PHYS_ADDR 0x10100000 /* 5 */ +#define AU1300_UART1_PHYS_ADDR 0x10101000 /* 5 */ +#define AU1300_UART2_PHYS_ADDR 0x10102000 /* 5 */ +#define AU1300_UART3_PHYS_ADDR 0x10103000 /* 5 */ #define AU1000_USB_OHCI_PHYS_ADDR 0x10100000 /* 012 */ #define AU1000_USB_UDC_PHYS_ADDR 0x10200000 /* 0123 */ +#define AU1300_GPIC_PHYS_ADDR 0x10200000 /* 5 */ #define AU1000_IRDA_PHYS_ADDR 0x10300000 /* 02 */ -#define AU1200_AES_PHYS_ADDR 0x10300000 /* 4 */ +#define AU1200_AES_PHYS_ADDR 0x10300000 /* 45 */ #define AU1000_IC0_PHYS_ADDR 0x10400000 /* 01234 */ +#define AU1300_GPU_PHYS_ADDR 0x10500000 /* 5 */ #define AU1000_MAC0_PHYS_ADDR 0x10500000 /* 023 */ #define AU1000_MAC1_PHYS_ADDR 0x10510000 /* 023 */ #define AU1000_MACEN_PHYS_ADDR 0x10520000 /* 023 */ -#define AU1100_SD0_PHYS_ADDR 0x10600000 /* 24 */ +#define AU1100_SD0_PHYS_ADDR 0x10600000 /* 245 */ +#define AU1300_SD1_PHYS_ADDR 0x10601000 /* 5 */ +#define AU1300_SD2_PHYS_ADDR 0x10602000 /* 5 */ #define AU1100_SD1_PHYS_ADDR 0x10680000 /* 24 */ +#define AU1300_SYS_PHYS_ADDR 0x10900000 /* 5 */ #define AU1550_PSC2_PHYS_ADDR 0x10A00000 /* 3 */ #define AU1550_PSC3_PHYS_ADDR 0x10B00000 /* 3 */ +#define AU1300_PSC0_PHYS_ADDR 0x10A00000 /* 5 */ +#define AU1300_PSC1_PHYS_ADDR 0x10A01000 /* 5 */ +#define AU1300_PSC2_PHYS_ADDR 0x10A02000 /* 5 */ +#define AU1300_PSC3_PHYS_ADDR 0x10A03000 /* 5 */ #define AU1000_I2S_PHYS_ADDR 0x11000000 /* 02 */ #define AU1500_MAC0_PHYS_ADDR 0x11500000 /* 1 */ #define AU1500_MAC1_PHYS_ADDR 0x11510000 /* 1 */ @@ -622,37 +760,96 @@ enum soc_au1200_ints { #define AU1000_SSI1_PHYS_ADDR 0x11680000 /* 02 */ #define AU1500_GPIO2_PHYS_ADDR 0x11700000 /* 1234 */ #define AU1000_IC1_PHYS_ADDR 0x11800000 /* 01234 */ -#define AU1000_SYS_PHYS_ADDR 0x11900000 /* 01234 */ +#define AU1000_SYS_PHYS_ADDR 0x11900000 /* 012345 */ #define AU1550_PSC0_PHYS_ADDR 0x11A00000 /* 34 */ #define AU1550_PSC1_PHYS_ADDR 0x11B00000 /* 34 */ #define AU1000_MEM_PHYS_ADDR 0x14000000 /* 01234 */ #define AU1000_STATIC_MEM_PHYS_ADDR 0x14001000 /* 01234 */ +#define AU1300_UDMA_PHYS_ADDR 0x14001800 /* 5 */ #define AU1000_DMA_PHYS_ADDR 0x14002000 /* 012 */ -#define AU1550_DBDMA_PHYS_ADDR 0x14002000 /* 34 */ -#define AU1550_DBDMA_CONF_PHYS_ADDR 0x14003000 /* 34 */ +#define AU1550_DBDMA_PHYS_ADDR 0x14002000 /* 345 */ +#define AU1550_DBDMA_CONF_PHYS_ADDR 0x14003000 /* 345 */ #define AU1000_MACDMA0_PHYS_ADDR 0x14004000 /* 0123 */ #define AU1000_MACDMA1_PHYS_ADDR 0x14004200 /* 0123 */ -#define AU1200_CIM_PHYS_ADDR 0x14004000 /* 4 */ +#define AU1200_CIM_PHYS_ADDR 0x14004000 /* 45 */ #define AU1500_PCI_PHYS_ADDR 0x14005000 /* 13 */ #define AU1550_PE_PHYS_ADDR 0x14008000 /* 3 */ #define AU1200_MAEBE_PHYS_ADDR 0x14010000 /* 4 */ #define AU1200_MAEFE_PHYS_ADDR 0x14012000 /* 4 */ +#define AU1300_MAEITE_PHYS_ADDR 0x14010000 /* 5 */ +#define AU1300_MAEMPE_PHYS_ADDR 0x14014000 /* 5 */ #define AU1550_USB_OHCI_PHYS_ADDR 0x14020000 /* 3 */ #define AU1200_USB_CTL_PHYS_ADDR 0x14020000 /* 4 */ #define AU1200_USB_OTG_PHYS_ADDR 0x14020020 /* 4 */ #define AU1200_USB_OHCI_PHYS_ADDR 0x14020100 /* 4 */ #define AU1200_USB_EHCI_PHYS_ADDR 0x14020200 /* 4 */ #define AU1200_USB_UDC_PHYS_ADDR 0x14022000 /* 4 */ +#define AU1300_USB_EHCI_PHYS_ADDR 0x14020000 /* 5 */ +#define AU1300_USB_OHCI0_PHYS_ADDR 0x14020400 /* 5 */ +#define AU1300_USB_OHCI1_PHYS_ADDR 0x14020800 /* 5 */ +#define AU1300_USB_CTL_PHYS_ADDR 0x14021000 /* 5 */ +#define AU1300_USB_OTG_PHYS_ADDR 0x14022000 /* 5 */ +#define AU1300_MAEBSA_PHYS_ADDR 0x14030000 /* 5 */ #define AU1100_LCD_PHYS_ADDR 0x15000000 /* 2 */ -#define AU1200_LCD_PHYS_ADDR 0x15000000 /* 4 */ +#define AU1200_LCD_PHYS_ADDR 0x15000000 /* 45 */ #define AU1500_PCI_MEM_PHYS_ADDR 0x400000000ULL /* 13 */ #define AU1500_PCI_IO_PHYS_ADDR 0x500000000ULL /* 13 */ #define AU1500_PCI_CONFIG0_PHYS_ADDR 0x600000000ULL /* 13 */ #define AU1500_PCI_CONFIG1_PHYS_ADDR 0x680000000ULL /* 13 */ -#define AU1000_PCMCIA_IO_PHYS_ADDR 0xF00000000ULL /* 01234 */ -#define AU1000_PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL /* 01234 */ -#define AU1000_PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL /* 01234 */ +#define AU1000_PCMCIA_IO_PHYS_ADDR 0xF00000000ULL /* 012345 */ +#define AU1000_PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL /* 012345 */ +#define AU1000_PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL /* 012345 */ +/**********************************************************************/ + + +/* + * Au1300 GPIO+INT controller (GPIC) register offsets and bits + * Registers are 128bits (0x10 bytes), divided into 4 "banks". + */ +#define AU1300_GPIC_PINVAL 0x0000 +#define AU1300_GPIC_PINVALCLR 0x0010 +#define AU1300_GPIC_IPEND 0x0020 +#define AU1300_GPIC_PRIENC 0x0030 +#define AU1300_GPIC_IEN 0x0040 /* int_mask in manual */ +#define AU1300_GPIC_IDIS 0x0050 /* int_maskclr in manual */ +#define AU1300_GPIC_DMASEL 0x0060 +#define AU1300_GPIC_DEVSEL 0x0080 +#define AU1300_GPIC_DEVCLR 0x0090 +#define AU1300_GPIC_RSTVAL 0x00a0 +/* pin configuration space. one 32bit register for up to 128 IRQs */ +#define AU1300_GPIC_PINCFG 0x1000 + +#define GPIC_GPIO_TO_BIT(gpio) \ + (1 << ((gpio) & 0x1f)) + +#define GPIC_GPIO_BANKOFF(gpio) \ + (((gpio) >> 5) * 4) + +/* Pin Control bits: who owns the pin, what does it do */ +#define GPIC_CFG_PC_GPIN 0 +#define GPIC_CFG_PC_DEV 1 +#define GPIC_CFG_PC_GPOLOW 2 +#define GPIC_CFG_PC_GPOHIGH 3 +#define GPIC_CFG_PC_MASK 3 + +/* assign pin to MIPS IRQ line */ +#define GPIC_CFG_IL_SET(x) (((x) & 3) << 2) +#define GPIC_CFG_IL_MASK (3 << 2) + +/* pin interrupt type setup */ +#define GPIC_CFG_IC_OFF (0 << 4) +#define GPIC_CFG_IC_LEVEL_LOW (1 << 4) +#define GPIC_CFG_IC_LEVEL_HIGH (2 << 4) +#define GPIC_CFG_IC_EDGE_FALL (5 << 4) +#define GPIC_CFG_IC_EDGE_RISE (6 << 4) +#define GPIC_CFG_IC_EDGE_BOTH (7 << 4) +#define GPIC_CFG_IC_MASK (7 << 4) + +/* allow interrupt to wake cpu from 'wait' */ +#define GPIC_CFG_IDLEWAKE (1 << 7) + +/***********************************************************************/ /* Au1000 SDRAM memory controller register offsets */ #define AU1000_MEM_SDMODE0 0x0000 @@ -1068,44 +1265,20 @@ enum soc_au1200_ints { #define SSI_ENABLE_CD (1 << 1) #define SSI_ENABLE_E (1 << 0) -/* IrDA Controller */ -#define IRDA_BASE 0xB0300000 -#define IR_RING_PTR_STATUS (IRDA_BASE + 0x00) -#define IR_RING_BASE_ADDR_H (IRDA_BASE + 0x04) -#define IR_RING_BASE_ADDR_L (IRDA_BASE + 0x08) -#define IR_RING_SIZE (IRDA_BASE + 0x0C) -#define IR_RING_PROMPT (IRDA_BASE + 0x10) -#define IR_RING_ADDR_CMPR (IRDA_BASE + 0x14) -#define IR_INT_CLEAR (IRDA_BASE + 0x18) -#define IR_CONFIG_1 (IRDA_BASE + 0x20) -# define IR_RX_INVERT_LED (1 << 0) -# define IR_TX_INVERT_LED (1 << 1) -# define IR_ST (1 << 2) -# define IR_SF (1 << 3) -# define IR_SIR (1 << 4) -# define IR_MIR (1 << 5) -# define IR_FIR (1 << 6) -# define IR_16CRC (1 << 7) -# define IR_TD (1 << 8) -# define IR_RX_ALL (1 << 9) -# define IR_DMA_ENABLE (1 << 10) -# define IR_RX_ENABLE (1 << 11) -# define IR_TX_ENABLE (1 << 12) -# define IR_LOOPBACK (1 << 14) -# define IR_SIR_MODE (IR_SIR | IR_DMA_ENABLE | \ - IR_RX_ALL | IR_RX_ENABLE | IR_SF | IR_16CRC) -#define IR_SIR_FLAGS (IRDA_BASE + 0x24) -#define IR_ENABLE (IRDA_BASE + 0x28) -# define IR_RX_STATUS (1 << 9) -# define IR_TX_STATUS (1 << 10) -#define IR_READ_PHY_CONFIG (IRDA_BASE + 0x2C) -#define IR_WRITE_PHY_CONFIG (IRDA_BASE + 0x30) -#define IR_MAX_PKT_LEN (IRDA_BASE + 0x34) -#define IR_RX_BYTE_CNT (IRDA_BASE + 0x38) -#define IR_CONFIG_2 (IRDA_BASE + 0x3C) -# define IR_MODE_INV (1 << 0) -# define IR_ONE_PIN (1 << 1) -#define IR_INTERFACE_CONFIG (IRDA_BASE + 0x40) + +/* + * The IrDA peripheral has an IRFIRSEL pin, but on the DB/PB boards it's not + * used to select FIR/SIR mode on the transceiver but as a GPIO. Instead a + * CPLD has to be told about the mode. + */ +#define AU1000_IRDA_PHY_MODE_OFF 0 +#define AU1000_IRDA_PHY_MODE_SIR 1 +#define AU1000_IRDA_PHY_MODE_FIR 2 + +struct au1k_irda_platform_data { + void(*set_phy_mode)(int mode); +}; + /* GPIO */ #define SYS_PINFUNC 0xB190002C diff --git a/arch/mips/include/asm/mach-au1x00/au1100_mmc.h b/arch/mips/include/asm/mach-au1x00/au1100_mmc.h index 94000a3b6f0..e221659f1bc 100644 --- a/arch/mips/include/asm/mach-au1x00/au1100_mmc.h +++ b/arch/mips/include/asm/mach-au1x00/au1100_mmc.h @@ -130,8 +130,10 @@ struct au1xmmc_platform_data { #define SD_CONFIG2_DF (0x00000008) #define SD_CONFIG2_DC (0x00000010) #define SD_CONFIG2_xx2 (0x000000e0) +#define SD_CONFIG2_BB (0x00000080) #define SD_CONFIG2_WB (0x00000100) #define SD_CONFIG2_RW (0x00000200) +#define SD_CONFIG2_DP (0x00000400) /* diff --git a/arch/mips/include/asm/mach-au1x00/au1200fb.h b/arch/mips/include/asm/mach-au1x00/au1200fb.h new file mode 100644 index 00000000000..b3c87cc64bb --- /dev/null +++ b/arch/mips/include/asm/mach-au1x00/au1200fb.h @@ -0,0 +1,14 @@ +/* + * platform data for au1200fb driver. + */ + +#ifndef _AU1200FB_PLAT_H_ +#define _AU1200FB_PLAT_H_ + +struct au1200fb_platdata { + int (*panel_index)(void); + int (*panel_init)(void); + int (*panel_shutdown)(void); +}; + +#endif diff --git a/arch/mips/include/asm/mach-au1x00/au1550nd.h b/arch/mips/include/asm/mach-au1x00/au1550nd.h new file mode 100644 index 00000000000..ad4c0a03afe --- /dev/null +++ b/arch/mips/include/asm/mach-au1x00/au1550nd.h @@ -0,0 +1,16 @@ +/* + * platform data for the Au1550 NAND driver + */ + +#ifndef _AU1550ND_H_ +#define _AU1550ND_H_ + +#include <linux/mtd/partitions.h> + +struct au1550nd_platdata { + struct mtd_partition *parts; + int num_parts; + int devwidth; /* 0 = 8bit device, 1 = 16bit device */ +}; + +#endif diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h index 323ce2d145f..217810e1836 100644 --- a/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h +++ b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h @@ -183,6 +183,37 @@ typedef volatile struct au1xxx_ddma_desc { #define AU1200_DSCR_CMD0_PSC1_SYNC 25 #define AU1200_DSCR_CMD0_CIM_SYNC 26 +#define AU1300_DSCR_CMD0_UART0_TX 0 +#define AU1300_DSCR_CMD0_UART0_RX 1 +#define AU1300_DSCR_CMD0_UART1_TX 2 +#define AU1300_DSCR_CMD0_UART1_RX 3 +#define AU1300_DSCR_CMD0_UART2_TX 4 +#define AU1300_DSCR_CMD0_UART2_RX 5 +#define AU1300_DSCR_CMD0_UART3_TX 6 +#define AU1300_DSCR_CMD0_UART3_RX 7 +#define AU1300_DSCR_CMD0_SDMS_TX0 8 +#define AU1300_DSCR_CMD0_SDMS_RX0 9 +#define AU1300_DSCR_CMD0_SDMS_TX1 10 +#define AU1300_DSCR_CMD0_SDMS_RX1 11 +#define AU1300_DSCR_CMD0_AES_TX 12 +#define AU1300_DSCR_CMD0_AES_RX 13 +#define AU1300_DSCR_CMD0_PSC0_TX 14 +#define AU1300_DSCR_CMD0_PSC0_RX 15 +#define AU1300_DSCR_CMD0_PSC1_TX 16 +#define AU1300_DSCR_CMD0_PSC1_RX 17 +#define AU1300_DSCR_CMD0_PSC2_TX 18 +#define AU1300_DSCR_CMD0_PSC2_RX 19 +#define AU1300_DSCR_CMD0_PSC3_TX 20 +#define AU1300_DSCR_CMD0_PSC3_RX 21 +#define AU1300_DSCR_CMD0_LCD 22 +#define AU1300_DSCR_CMD0_NAND_FLASH 23 +#define AU1300_DSCR_CMD0_SDMS_TX2 24 +#define AU1300_DSCR_CMD0_SDMS_RX2 25 +#define AU1300_DSCR_CMD0_CIM_SYNC 26 +#define AU1300_DSCR_CMD0_UDMA 27 +#define AU1300_DSCR_CMD0_DMA_REQ0 28 +#define AU1300_DSCR_CMD0_DMA_REQ1 29 + #define DSCR_CMD0_THROTTLE 30 #define DSCR_CMD0_ALWAYS 31 #define DSCR_NDEV_IDS 32 diff --git a/arch/mips/include/asm/mach-au1x00/cpu-feature-overrides.h b/arch/mips/include/asm/mach-au1x00/cpu-feature-overrides.h index d5df0cab9b8..3f741af37d4 100644 --- a/arch/mips/include/asm/mach-au1x00/cpu-feature-overrides.h +++ b/arch/mips/include/asm/mach-au1x00/cpu-feature-overrides.h @@ -13,12 +13,14 @@ #define cpu_has_4k_cache 1 #define cpu_has_tx39_cache 0 #define cpu_has_fpu 0 +#define cpu_has_32fpr 0 #define cpu_has_counter 1 #define cpu_has_watch 1 #define cpu_has_divec 1 #define cpu_has_vce 0 #define cpu_has_cache_cdex_p 0 #define cpu_has_cache_cdex_s 0 +#define cpu_has_prefetch 1 #define cpu_has_mcheck 1 #define cpu_has_ejtag 1 #define cpu_has_llsc 1 @@ -29,6 +31,7 @@ #define cpu_has_vtag_icache 0 #define cpu_has_dc_aliases 0 #define cpu_has_ic_fills_f_dc 1 +#define cpu_has_pindexed_dcache 0 #define cpu_has_mips32r1 1 #define cpu_has_mips32r2 0 #define cpu_has_mips64r1 0 diff --git a/arch/mips/include/asm/mach-au1x00/gpio-au1300.h b/arch/mips/include/asm/mach-au1x00/gpio-au1300.h new file mode 100644 index 00000000000..556e1be20bf --- /dev/null +++ b/arch/mips/include/asm/mach-au1x00/gpio-au1300.h @@ -0,0 +1,241 @@ +/* + * gpio-au1300.h -- GPIO control for Au1300 GPIC and compatibles. + * + * Copyright (c) 2009-2011 Manuel Lauss <manuel.lauss@googlemail.com> + */ + +#ifndef _GPIO_AU1300_H_ +#define _GPIO_AU1300_H_ + +#include <asm/addrspace.h> +#include <asm/io.h> +#include <asm/mach-au1x00/au1000.h> + +/* with the current GPIC design, up to 128 GPIOs are possible. + * The only implementation so far is in the Au1300, which has 75 externally + * available GPIOs. + */ +#define AU1300_GPIO_BASE 0 +#define AU1300_GPIO_NUM 75 +#define AU1300_GPIO_MAX (AU1300_GPIO_BASE + AU1300_GPIO_NUM - 1) + +#define AU1300_GPIC_ADDR \ + (void __iomem *)KSEG1ADDR(AU1300_GPIC_PHYS_ADDR) + +static inline int au1300_gpio_get_value(unsigned int gpio) +{ + void __iomem *roff = AU1300_GPIC_ADDR; + int bit; + + gpio -= AU1300_GPIO_BASE; + roff += GPIC_GPIO_BANKOFF(gpio); + bit = GPIC_GPIO_TO_BIT(gpio); + return __raw_readl(roff + AU1300_GPIC_PINVAL) & bit; +} + +static inline int au1300_gpio_direction_input(unsigned int gpio) +{ + void __iomem *roff = AU1300_GPIC_ADDR; + unsigned long bit; + + gpio -= AU1300_GPIO_BASE; + + roff += GPIC_GPIO_BANKOFF(gpio); + bit = GPIC_GPIO_TO_BIT(gpio); + __raw_writel(bit, roff + AU1300_GPIC_DEVCLR); + wmb(); + + return 0; +} + +static inline int au1300_gpio_set_value(unsigned int gpio, int v) +{ + void __iomem *roff = AU1300_GPIC_ADDR; + unsigned long bit; + + gpio -= AU1300_GPIO_BASE; + + roff += GPIC_GPIO_BANKOFF(gpio); + bit = GPIC_GPIO_TO_BIT(gpio); + __raw_writel(bit, roff + (v ? AU1300_GPIC_PINVAL + : AU1300_GPIC_PINVALCLR)); + wmb(); + + return 0; +} + +static inline int au1300_gpio_direction_output(unsigned int gpio, int v) +{ + /* hw switches to output automatically */ + return au1300_gpio_set_value(gpio, v); +} + +static inline int au1300_gpio_to_irq(unsigned int gpio) +{ + return AU1300_FIRST_INT + (gpio - AU1300_GPIO_BASE); +} + +static inline int au1300_irq_to_gpio(unsigned int irq) +{ + return (irq - AU1300_FIRST_INT) + AU1300_GPIO_BASE; +} + +static inline int au1300_gpio_is_valid(unsigned int gpio) +{ + int ret; + + switch (alchemy_get_cputype()) { + case ALCHEMY_CPU_AU1300: + ret = ((gpio >= AU1300_GPIO_BASE) && (gpio <= AU1300_GPIO_MAX)); + break; + default: + ret = 0; + } + return ret; +} + +static inline int au1300_gpio_cansleep(unsigned int gpio) +{ + return 0; +} + +/* hardware remembers gpio 0-63 levels on powerup */ +static inline int au1300_gpio_getinitlvl(unsigned int gpio) +{ + void __iomem *roff = AU1300_GPIC_ADDR; + unsigned long v; + + if (unlikely(gpio > 63)) + return 0; + else if (gpio > 31) { + gpio -= 32; + roff += 4; + } + + v = __raw_readl(roff + AU1300_GPIC_RSTVAL); + return (v >> gpio) & 1; +} + +/**********************************************************************/ + +/* Linux gpio framework integration. +* +* 4 use cases of Alchemy GPIOS: +*(1) GPIOLIB=y, ALCHEMY_GPIO_INDIRECT=y: +* Board must register gpiochips. +*(2) GPIOLIB=y, ALCHEMY_GPIO_INDIRECT=n: +* A gpiochip for the 75 GPIOs is registered. +* +*(3) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=y: +* the boards' gpio.h must provide the linux gpio wrapper functions, +* +*(4) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=n: +* inlinable gpio functions are provided which enable access to the +* Au1300 gpios only by using the numbers straight out of the data- +* sheets. + +* Cases 1 and 3 are intended for boards which want to provide their own +* GPIO namespace and -operations (i.e. for example you have 8 GPIOs +* which are in part provided by spare Au1300 GPIO pins and in part by +* an external FPGA but you still want them to be accssible in linux +* as gpio0-7. The board can of course use the alchemy_gpioX_* functions +* as required). +*/ + +#ifndef CONFIG_GPIOLIB + +#ifdef CONFIG_ALCHEMY_GPIOINT_AU1300 + +#ifndef CONFIG_ALCHEMY_GPIO_INDIRECT /* case (4) */ + +static inline int gpio_direction_input(unsigned int gpio) +{ + return au1300_gpio_direction_input(gpio); +} + +static inline int gpio_direction_output(unsigned int gpio, int v) +{ + return au1300_gpio_direction_output(gpio, v); +} + +static inline int gpio_get_value(unsigned int gpio) +{ + return au1300_gpio_get_value(gpio); +} + +static inline void gpio_set_value(unsigned int gpio, int v) +{ + au1300_gpio_set_value(gpio, v); +} + +static inline int gpio_get_value_cansleep(unsigned gpio) +{ + return gpio_get_value(gpio); +} + +static inline void gpio_set_value_cansleep(unsigned gpio, int value) +{ + gpio_set_value(gpio, value); +} + +static inline int gpio_is_valid(unsigned int gpio) +{ + return au1300_gpio_is_valid(gpio); +} + +static inline int gpio_cansleep(unsigned int gpio) +{ + return au1300_gpio_cansleep(gpio); +} + +static inline int gpio_to_irq(unsigned int gpio) +{ + return au1300_gpio_to_irq(gpio); +} + +static inline int irq_to_gpio(unsigned int irq) +{ + return au1300_irq_to_gpio(irq); +} + +static inline int gpio_request(unsigned int gpio, const char *label) +{ + return 0; +} + +static inline void gpio_free(unsigned int gpio) +{ +} + +static inline int gpio_set_debounce(unsigned gpio, unsigned debounce) +{ + return -ENOSYS; +} + +static inline void gpio_unexport(unsigned gpio) +{ +} + +static inline int gpio_export(unsigned gpio, bool direction_may_change) +{ + return -ENOSYS; +} + +static inline int gpio_sysfs_set_active_low(unsigned gpio, int value) +{ + return -ENOSYS; +} + +static inline int gpio_export_link(struct device *dev, const char *name, + unsigned gpio) +{ + return -ENOSYS; +} + +#endif /* !CONFIG_ALCHEMY_GPIO_INDIRECT */ + +#endif /* CONFIG_ALCHEMY_GPIOINT_AU1300 */ + +#endif /* CONFIG GPIOLIB */ + +#endif /* _GPIO_AU1300_H_ */ diff --git a/arch/mips/include/asm/mach-au1x00/gpio.h b/arch/mips/include/asm/mach-au1x00/gpio.h index fcdc8c4809d..22e7ff17fc4 100644 --- a/arch/mips/include/asm/mach-au1x00/gpio.h +++ b/arch/mips/include/asm/mach-au1x00/gpio.h @@ -12,6 +12,7 @@ #include <asm/mach-au1x00/au1000.h> #include <asm/mach-au1x00/gpio-au1000.h> +#include <asm/mach-au1x00/gpio-au1300.h> /* On Au1000, Au1500 and Au1100 GPIOs won't work as inputs before * SYS_PININPUTEN is written to at least once. On Au1550/Au1200/Au1300 this @@ -58,6 +59,8 @@ static inline int __au_irq_to_gpio(unsigned int irq) switch (alchemy_get_cputype()) { case ALCHEMY_CPU_AU1000...ALCHEMY_CPU_AU1200: return alchemy_irq_to_gpio(irq); + case ALCHEMY_CPU_AU1300: + return au1300_irq_to_gpio(irq); } return -EINVAL; } diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h index 96a2391ad85..5b8d15bb5fe 100644 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h @@ -13,6 +13,7 @@ #define BCM6345_CPU_ID 0x6345 #define BCM6348_CPU_ID 0x6348 #define BCM6358_CPU_ID 0x6358 +#define BCM6368_CPU_ID 0x6368 void __init bcm63xx_cpu_init(void); u16 __bcm63xx_get_cpu_id(void); @@ -71,6 +72,19 @@ unsigned int bcm63xx_get_cpu_freq(void); # define BCMCPU_IS_6358() (0) #endif +#ifdef CONFIG_BCM63XX_CPU_6368 +# ifdef bcm63xx_get_cpu_id +# undef bcm63xx_get_cpu_id +# define bcm63xx_get_cpu_id() __bcm63xx_get_cpu_id() +# define BCMCPU_RUNTIME_DETECT +# else +# define bcm63xx_get_cpu_id() BCM6368_CPU_ID +# endif +# define BCMCPU_IS_6368() (bcm63xx_get_cpu_id() == BCM6368_CPU_ID) +#else +# define BCMCPU_IS_6368() (0) +#endif + #ifndef bcm63xx_get_cpu_id #error "No CPU support configured" #endif @@ -88,6 +102,7 @@ enum bcm63xx_regs_set { RSET_UART1, RSET_GPIO, RSET_SPI, + RSET_SPI2, RSET_UDC0, RSET_OHCI0, RSET_OHCI_PRIV, @@ -98,10 +113,23 @@ enum bcm63xx_regs_set { RSET_ENET0, RSET_ENET1, RSET_ENETDMA, + RSET_ENETDMAC, + RSET_ENETDMAS, + RSET_ENETSW, RSET_EHCI0, RSET_SDRAM, RSET_MEMC, RSET_DDR, + RSET_M2M, + RSET_ATM, + RSET_XTM, + RSET_XTMDMA, + RSET_XTMDMAC, + RSET_XTMDMAS, + RSET_PCM, + RSET_PCMDMA, + RSET_PCMDMAC, + RSET_PCMDMAS, }; #define RSET_DSL_LMEM_SIZE (64 * 1024 * 4) @@ -109,11 +137,18 @@ enum bcm63xx_regs_set { #define RSET_WDT_SIZE 12 #define RSET_ENET_SIZE 2048 #define RSET_ENETDMA_SIZE 2048 +#define RSET_ENETSW_SIZE 65536 #define RSET_UART_SIZE 24 #define RSET_UDC_SIZE 256 #define RSET_OHCI_SIZE 256 #define RSET_EHCI_SIZE 256 #define RSET_PCMCIA_SIZE 12 +#define RSET_M2M_SIZE 256 +#define RSET_ATM_SIZE 4096 +#define RSET_XTM_SIZE 10240 +#define RSET_XTMDMA_SIZE 256 +#define RSET_XTMDMAC_SIZE(chans) (16 * (chans)) +#define RSET_XTMDMAS_SIZE(chans) (16 * (chans)) /* * 6338 register sets base address @@ -127,6 +162,7 @@ enum bcm63xx_regs_set { #define BCM_6338_UART1_BASE (0xdeadbeef) #define BCM_6338_GPIO_BASE (0xfffe0400) #define BCM_6338_SPI_BASE (0xfffe0c00) +#define BCM_6338_SPI2_BASE (0xdeadbeef) #define BCM_6338_UDC0_BASE (0xdeadbeef) #define BCM_6338_USBDMA_BASE (0xfffe2400) #define BCM_6338_OHCI0_BASE (0xdeadbeef) @@ -136,15 +172,27 @@ enum bcm63xx_regs_set { #define BCM_6338_PCMCIA_BASE (0xdeadbeef) #define BCM_6338_SDRAM_REGS_BASE (0xfffe3100) #define BCM_6338_DSL_BASE (0xfffe1000) -#define BCM_6338_SAR_BASE (0xfffe2000) #define BCM_6338_UBUS_BASE (0xdeadbeef) #define BCM_6338_ENET0_BASE (0xfffe2800) #define BCM_6338_ENET1_BASE (0xdeadbeef) #define BCM_6338_ENETDMA_BASE (0xfffe2400) +#define BCM_6338_ENETDMAC_BASE (0xfffe2500) +#define BCM_6338_ENETDMAS_BASE (0xfffe2600) +#define BCM_6338_ENETSW_BASE (0xdeadbeef) #define BCM_6338_EHCI0_BASE (0xdeadbeef) #define BCM_6338_SDRAM_BASE (0xfffe3100) #define BCM_6338_MEMC_BASE (0xdeadbeef) #define BCM_6338_DDR_BASE (0xdeadbeef) +#define BCM_6338_M2M_BASE (0xdeadbeef) +#define BCM_6338_ATM_BASE (0xfffe2000) +#define BCM_6338_XTM_BASE (0xdeadbeef) +#define BCM_6338_XTMDMA_BASE (0xdeadbeef) +#define BCM_6338_XTMDMAC_BASE (0xdeadbeef) +#define BCM_6338_XTMDMAS_BASE (0xdeadbeef) +#define BCM_6338_PCM_BASE (0xdeadbeef) +#define BCM_6338_PCMDMA_BASE (0xdeadbeef) +#define BCM_6338_PCMDMAC_BASE (0xdeadbeef) +#define BCM_6338_PCMDMAS_BASE (0xdeadbeef) /* * 6345 register sets base address @@ -158,24 +206,37 @@ enum bcm63xx_regs_set { #define BCM_6345_UART1_BASE (0xdeadbeef) #define BCM_6345_GPIO_BASE (0xfffe0400) #define BCM_6345_SPI_BASE (0xdeadbeef) +#define BCM_6345_SPI2_BASE (0xdeadbeef) #define BCM_6345_UDC0_BASE (0xdeadbeef) #define BCM_6345_USBDMA_BASE (0xfffe2800) #define BCM_6345_ENET0_BASE (0xfffe1800) #define BCM_6345_ENETDMA_BASE (0xfffe2800) +#define BCM_6345_ENETDMAC_BASE (0xfffe2900) +#define BCM_6345_ENETDMAS_BASE (0xfffe2a00) +#define BCM_6345_ENETSW_BASE (0xdeadbeef) #define BCM_6345_PCMCIA_BASE (0xfffe2028) -#define BCM_6345_MPI_BASE (0xdeadbeef) +#define BCM_6345_MPI_BASE (0xfffe2000) #define BCM_6345_OHCI0_BASE (0xfffe2100) #define BCM_6345_OHCI_PRIV_BASE (0xfffe2200) #define BCM_6345_USBH_PRIV_BASE (0xdeadbeef) #define BCM_6345_SDRAM_REGS_BASE (0xfffe2300) #define BCM_6345_DSL_BASE (0xdeadbeef) -#define BCM_6345_SAR_BASE (0xdeadbeef) #define BCM_6345_UBUS_BASE (0xdeadbeef) #define BCM_6345_ENET1_BASE (0xdeadbeef) #define BCM_6345_EHCI0_BASE (0xdeadbeef) #define BCM_6345_SDRAM_BASE (0xfffe2300) #define BCM_6345_MEMC_BASE (0xdeadbeef) #define BCM_6345_DDR_BASE (0xdeadbeef) +#define BCM_6345_M2M_BASE (0xdeadbeef) +#define BCM_6345_ATM_BASE (0xfffe4000) +#define BCM_6345_XTM_BASE (0xdeadbeef) +#define BCM_6345_XTMDMA_BASE (0xdeadbeef) +#define BCM_6345_XTMDMAC_BASE (0xdeadbeef) +#define BCM_6345_XTMDMAS_BASE (0xdeadbeef) +#define BCM_6345_PCM_BASE (0xdeadbeef) +#define BCM_6345_PCMDMA_BASE (0xdeadbeef) +#define BCM_6345_PCMDMAC_BASE (0xdeadbeef) +#define BCM_6345_PCMDMAS_BASE (0xdeadbeef) /* * 6348 register sets base address @@ -188,6 +249,7 @@ enum bcm63xx_regs_set { #define BCM_6348_UART1_BASE (0xdeadbeef) #define BCM_6348_GPIO_BASE (0xfffe0400) #define BCM_6348_SPI_BASE (0xfffe0c00) +#define BCM_6348_SPI2_BASE (0xdeadbeef) #define BCM_6348_UDC0_BASE (0xfffe1000) #define BCM_6348_OHCI0_BASE (0xfffe1b00) #define BCM_6348_OHCI_PRIV_BASE (0xfffe1c00) @@ -195,14 +257,27 @@ enum bcm63xx_regs_set { #define BCM_6348_MPI_BASE (0xfffe2000) #define BCM_6348_PCMCIA_BASE (0xfffe2054) #define BCM_6348_SDRAM_REGS_BASE (0xfffe2300) +#define BCM_6348_M2M_BASE (0xfffe2800) #define BCM_6348_DSL_BASE (0xfffe3000) #define BCM_6348_ENET0_BASE (0xfffe6000) #define BCM_6348_ENET1_BASE (0xfffe6800) #define BCM_6348_ENETDMA_BASE (0xfffe7000) +#define BCM_6348_ENETDMAC_BASE (0xfffe7100) +#define BCM_6348_ENETDMAS_BASE (0xfffe7200) +#define BCM_6348_ENETSW_BASE (0xdeadbeef) #define BCM_6348_EHCI0_BASE (0xdeadbeef) #define BCM_6348_SDRAM_BASE (0xfffe2300) #define BCM_6348_MEMC_BASE (0xdeadbeef) #define BCM_6348_DDR_BASE (0xdeadbeef) +#define BCM_6348_ATM_BASE (0xfffe4000) +#define BCM_6348_XTM_BASE (0xdeadbeef) +#define BCM_6348_XTMDMA_BASE (0xdeadbeef) +#define BCM_6348_XTMDMAC_BASE (0xdeadbeef) +#define BCM_6348_XTMDMAS_BASE (0xdeadbeef) +#define BCM_6348_PCM_BASE (0xdeadbeef) +#define BCM_6348_PCMDMA_BASE (0xdeadbeef) +#define BCM_6348_PCMDMAC_BASE (0xdeadbeef) +#define BCM_6348_PCMDMAS_BASE (0xdeadbeef) /* * 6358 register sets base address @@ -215,6 +290,7 @@ enum bcm63xx_regs_set { #define BCM_6358_UART1_BASE (0xfffe0120) #define BCM_6358_GPIO_BASE (0xfffe0080) #define BCM_6358_SPI_BASE (0xdeadbeef) +#define BCM_6358_SPI2_BASE (0xfffe0800) #define BCM_6358_UDC0_BASE (0xfffe0800) #define BCM_6358_OHCI0_BASE (0xfffe1400) #define BCM_6358_OHCI_PRIV_BASE (0xdeadbeef) @@ -222,214 +298,175 @@ enum bcm63xx_regs_set { #define BCM_6358_MPI_BASE (0xfffe1000) #define BCM_6358_PCMCIA_BASE (0xfffe1054) #define BCM_6358_SDRAM_REGS_BASE (0xfffe2300) +#define BCM_6358_M2M_BASE (0xdeadbeef) #define BCM_6358_DSL_BASE (0xfffe3000) #define BCM_6358_ENET0_BASE (0xfffe4000) #define BCM_6358_ENET1_BASE (0xfffe4800) #define BCM_6358_ENETDMA_BASE (0xfffe5000) +#define BCM_6358_ENETDMAC_BASE (0xfffe5100) +#define BCM_6358_ENETDMAS_BASE (0xfffe5200) +#define BCM_6358_ENETSW_BASE (0xdeadbeef) #define BCM_6358_EHCI0_BASE (0xfffe1300) #define BCM_6358_SDRAM_BASE (0xdeadbeef) #define BCM_6358_MEMC_BASE (0xfffe1200) #define BCM_6358_DDR_BASE (0xfffe12a0) +#define BCM_6358_ATM_BASE (0xfffe2000) +#define BCM_6358_XTM_BASE (0xdeadbeef) +#define BCM_6358_XTMDMA_BASE (0xdeadbeef) +#define BCM_6358_XTMDMAC_BASE (0xdeadbeef) +#define BCM_6358_XTMDMAS_BASE (0xdeadbeef) +#define BCM_6358_PCM_BASE (0xfffe1600) +#define BCM_6358_PCMDMA_BASE (0xfffe1800) +#define BCM_6358_PCMDMAC_BASE (0xfffe1900) +#define BCM_6358_PCMDMAS_BASE (0xfffe1a00) + + +/* + * 6368 register sets base address + */ +#define BCM_6368_DSL_LMEM_BASE (0xdeadbeef) +#define BCM_6368_PERF_BASE (0xb0000000) +#define BCM_6368_TIMER_BASE (0xb0000040) +#define BCM_6368_WDT_BASE (0xb000005c) +#define BCM_6368_UART0_BASE (0xb0000100) +#define BCM_6368_UART1_BASE (0xb0000120) +#define BCM_6368_GPIO_BASE (0xb0000080) +#define BCM_6368_SPI_BASE (0xdeadbeef) +#define BCM_6368_SPI2_BASE (0xb0000800) +#define BCM_6368_UDC0_BASE (0xdeadbeef) +#define BCM_6368_OHCI0_BASE (0xb0001600) +#define BCM_6368_OHCI_PRIV_BASE (0xdeadbeef) +#define BCM_6368_USBH_PRIV_BASE (0xb0001700) +#define BCM_6368_MPI_BASE (0xb0001000) +#define BCM_6368_PCMCIA_BASE (0xb0001054) +#define BCM_6368_SDRAM_REGS_BASE (0xdeadbeef) +#define BCM_6368_M2M_BASE (0xdeadbeef) +#define BCM_6368_DSL_BASE (0xdeadbeef) +#define BCM_6368_ENET0_BASE (0xdeadbeef) +#define BCM_6368_ENET1_BASE (0xdeadbeef) +#define BCM_6368_ENETDMA_BASE (0xb0006800) +#define BCM_6368_ENETDMAC_BASE (0xb0006a00) +#define BCM_6368_ENETDMAS_BASE (0xb0006c00) +#define BCM_6368_ENETSW_BASE (0xb0f00000) +#define BCM_6368_EHCI0_BASE (0xb0001500) +#define BCM_6368_SDRAM_BASE (0xdeadbeef) +#define BCM_6368_MEMC_BASE (0xb0001200) +#define BCM_6368_DDR_BASE (0xb0001280) +#define BCM_6368_ATM_BASE (0xdeadbeef) +#define BCM_6368_XTM_BASE (0xb0001800) +#define BCM_6368_XTMDMA_BASE (0xb0005000) +#define BCM_6368_XTMDMAC_BASE (0xb0005200) +#define BCM_6368_XTMDMAS_BASE (0xb0005400) +#define BCM_6368_PCM_BASE (0xb0004000) +#define BCM_6368_PCMDMA_BASE (0xb0005800) +#define BCM_6368_PCMDMAC_BASE (0xb0005a00) +#define BCM_6368_PCMDMAS_BASE (0xb0005c00) extern const unsigned long *bcm63xx_regs_base; +#define __GEN_RSET_BASE(__cpu, __rset) \ + case RSET_## __rset : \ + return BCM_## __cpu ##_## __rset ##_BASE; + +#define __GEN_RSET(__cpu) \ + switch (set) { \ + __GEN_RSET_BASE(__cpu, DSL_LMEM) \ + __GEN_RSET_BASE(__cpu, PERF) \ + __GEN_RSET_BASE(__cpu, TIMER) \ + __GEN_RSET_BASE(__cpu, WDT) \ + __GEN_RSET_BASE(__cpu, UART0) \ + __GEN_RSET_BASE(__cpu, UART1) \ + __GEN_RSET_BASE(__cpu, GPIO) \ + __GEN_RSET_BASE(__cpu, SPI) \ + __GEN_RSET_BASE(__cpu, SPI2) \ + __GEN_RSET_BASE(__cpu, UDC0) \ + __GEN_RSET_BASE(__cpu, OHCI0) \ + __GEN_RSET_BASE(__cpu, OHCI_PRIV) \ + __GEN_RSET_BASE(__cpu, USBH_PRIV) \ + __GEN_RSET_BASE(__cpu, MPI) \ + __GEN_RSET_BASE(__cpu, PCMCIA) \ + __GEN_RSET_BASE(__cpu, DSL) \ + __GEN_RSET_BASE(__cpu, ENET0) \ + __GEN_RSET_BASE(__cpu, ENET1) \ + __GEN_RSET_BASE(__cpu, ENETDMA) \ + __GEN_RSET_BASE(__cpu, ENETDMAC) \ + __GEN_RSET_BASE(__cpu, ENETDMAS) \ + __GEN_RSET_BASE(__cpu, ENETSW) \ + __GEN_RSET_BASE(__cpu, EHCI0) \ + __GEN_RSET_BASE(__cpu, SDRAM) \ + __GEN_RSET_BASE(__cpu, MEMC) \ + __GEN_RSET_BASE(__cpu, DDR) \ + __GEN_RSET_BASE(__cpu, M2M) \ + __GEN_RSET_BASE(__cpu, ATM) \ + __GEN_RSET_BASE(__cpu, XTM) \ + __GEN_RSET_BASE(__cpu, XTMDMA) \ + __GEN_RSET_BASE(__cpu, XTMDMAC) \ + __GEN_RSET_BASE(__cpu, XTMDMAS) \ + __GEN_RSET_BASE(__cpu, PCM) \ + __GEN_RSET_BASE(__cpu, PCMDMA) \ + __GEN_RSET_BASE(__cpu, PCMDMAC) \ + __GEN_RSET_BASE(__cpu, PCMDMAS) \ + } + +#define __GEN_CPU_REGS_TABLE(__cpu) \ + [RSET_DSL_LMEM] = BCM_## __cpu ##_DSL_LMEM_BASE, \ + [RSET_PERF] = BCM_## __cpu ##_PERF_BASE, \ + [RSET_TIMER] = BCM_## __cpu ##_TIMER_BASE, \ + [RSET_WDT] = BCM_## __cpu ##_WDT_BASE, \ + [RSET_UART0] = BCM_## __cpu ##_UART0_BASE, \ + [RSET_UART1] = BCM_## __cpu ##_UART1_BASE, \ + [RSET_GPIO] = BCM_## __cpu ##_GPIO_BASE, \ + [RSET_SPI] = BCM_## __cpu ##_SPI_BASE, \ + [RSET_SPI2] = BCM_## __cpu ##_SPI2_BASE, \ + [RSET_UDC0] = BCM_## __cpu ##_UDC0_BASE, \ + [RSET_OHCI0] = BCM_## __cpu ##_OHCI0_BASE, \ + [RSET_OHCI_PRIV] = BCM_## __cpu ##_OHCI_PRIV_BASE, \ + [RSET_USBH_PRIV] = BCM_## __cpu ##_USBH_PRIV_BASE, \ + [RSET_MPI] = BCM_## __cpu ##_MPI_BASE, \ + [RSET_PCMCIA] = BCM_## __cpu ##_PCMCIA_BASE, \ + [RSET_DSL] = BCM_## __cpu ##_DSL_BASE, \ + [RSET_ENET0] = BCM_## __cpu ##_ENET0_BASE, \ + [RSET_ENET1] = BCM_## __cpu ##_ENET1_BASE, \ + [RSET_ENETDMA] = BCM_## __cpu ##_ENETDMA_BASE, \ + [RSET_ENETDMAC] = BCM_## __cpu ##_ENETDMAC_BASE, \ + [RSET_ENETDMAS] = BCM_## __cpu ##_ENETDMAS_BASE, \ + [RSET_ENETSW] = BCM_## __cpu ##_ENETSW_BASE, \ + [RSET_EHCI0] = BCM_## __cpu ##_EHCI0_BASE, \ + [RSET_SDRAM] = BCM_## __cpu ##_SDRAM_BASE, \ + [RSET_MEMC] = BCM_## __cpu ##_MEMC_BASE, \ + [RSET_DDR] = BCM_## __cpu ##_DDR_BASE, \ + [RSET_M2M] = BCM_## __cpu ##_M2M_BASE, \ + [RSET_ATM] = BCM_## __cpu ##_ATM_BASE, \ + [RSET_XTM] = BCM_## __cpu ##_XTM_BASE, \ + [RSET_XTMDMA] = BCM_## __cpu ##_XTMDMA_BASE, \ + [RSET_XTMDMAC] = BCM_## __cpu ##_XTMDMAC_BASE, \ + [RSET_XTMDMAS] = BCM_## __cpu ##_XTMDMAS_BASE, \ + [RSET_PCM] = BCM_## __cpu ##_PCM_BASE, \ + [RSET_PCMDMA] = BCM_## __cpu ##_PCMDMA_BASE, \ + [RSET_PCMDMAC] = BCM_## __cpu ##_PCMDMAC_BASE, \ + [RSET_PCMDMAS] = BCM_## __cpu ##_PCMDMAS_BASE, \ + + static inline unsigned long bcm63xx_regset_address(enum bcm63xx_regs_set set) { #ifdef BCMCPU_RUNTIME_DETECT return bcm63xx_regs_base[set]; #else #ifdef CONFIG_BCM63XX_CPU_6338 - switch (set) { - case RSET_DSL_LMEM: - return BCM_6338_DSL_LMEM_BASE; - case RSET_PERF: - return BCM_6338_PERF_BASE; - case RSET_TIMER: - return BCM_6338_TIMER_BASE; - case RSET_WDT: - return BCM_6338_WDT_BASE; - case RSET_UART0: - return BCM_6338_UART0_BASE; - case RSET_UART1: - return BCM_6338_UART1_BASE; - case RSET_GPIO: - return BCM_6338_GPIO_BASE; - case RSET_SPI: - return BCM_6338_SPI_BASE; - case RSET_UDC0: - return BCM_6338_UDC0_BASE; - case RSET_OHCI0: - return BCM_6338_OHCI0_BASE; - case RSET_OHCI_PRIV: - return BCM_6338_OHCI_PRIV_BASE; - case RSET_USBH_PRIV: - return BCM_6338_USBH_PRIV_BASE; - case RSET_MPI: - return BCM_6338_MPI_BASE; - case RSET_PCMCIA: - return BCM_6338_PCMCIA_BASE; - case RSET_DSL: - return BCM_6338_DSL_BASE; - case RSET_ENET0: - return BCM_6338_ENET0_BASE; - case RSET_ENET1: - return BCM_6338_ENET1_BASE; - case RSET_ENETDMA: - return BCM_6338_ENETDMA_BASE; - case RSET_EHCI0: - return BCM_6338_EHCI0_BASE; - case RSET_SDRAM: - return BCM_6338_SDRAM_BASE; - case RSET_MEMC: - return BCM_6338_MEMC_BASE; - case RSET_DDR: - return BCM_6338_DDR_BASE; - } + __GEN_RSET(6338) #endif #ifdef CONFIG_BCM63XX_CPU_6345 - switch (set) { - case RSET_DSL_LMEM: - return BCM_6345_DSL_LMEM_BASE; - case RSET_PERF: - return BCM_6345_PERF_BASE; - case RSET_TIMER: - return BCM_6345_TIMER_BASE; - case RSET_WDT: - return BCM_6345_WDT_BASE; - case RSET_UART0: - return BCM_6345_UART0_BASE; - case RSET_UART1: - return BCM_6345_UART1_BASE; - case RSET_GPIO: - return BCM_6345_GPIO_BASE; - case RSET_SPI: - return BCM_6345_SPI_BASE; - case RSET_UDC0: - return BCM_6345_UDC0_BASE; - case RSET_OHCI0: - return BCM_6345_OHCI0_BASE; - case RSET_OHCI_PRIV: - return BCM_6345_OHCI_PRIV_BASE; - case RSET_USBH_PRIV: - return BCM_6345_USBH_PRIV_BASE; - case RSET_MPI: - return BCM_6345_MPI_BASE; - case RSET_PCMCIA: - return BCM_6345_PCMCIA_BASE; - case RSET_DSL: - return BCM_6345_DSL_BASE; - case RSET_ENET0: - return BCM_6345_ENET0_BASE; - case RSET_ENET1: - return BCM_6345_ENET1_BASE; - case RSET_ENETDMA: - return BCM_6345_ENETDMA_BASE; - case RSET_EHCI0: - return BCM_6345_EHCI0_BASE; - case RSET_SDRAM: - return BCM_6345_SDRAM_BASE; - case RSET_MEMC: - return BCM_6345_MEMC_BASE; - case RSET_DDR: - return BCM_6345_DDR_BASE; - } + __GEN_RSET(6345) #endif #ifdef CONFIG_BCM63XX_CPU_6348 - switch (set) { - case RSET_DSL_LMEM: - return BCM_6348_DSL_LMEM_BASE; - case RSET_PERF: - return BCM_6348_PERF_BASE; - case RSET_TIMER: - return BCM_6348_TIMER_BASE; - case RSET_WDT: - return BCM_6348_WDT_BASE; - case RSET_UART0: - return BCM_6348_UART0_BASE; - case RSET_UART1: - return BCM_6348_UART1_BASE; - case RSET_GPIO: - return BCM_6348_GPIO_BASE; - case RSET_SPI: - return BCM_6348_SPI_BASE; - case RSET_UDC0: - return BCM_6348_UDC0_BASE; - case RSET_OHCI0: - return BCM_6348_OHCI0_BASE; - case RSET_OHCI_PRIV: - return BCM_6348_OHCI_PRIV_BASE; - case RSET_USBH_PRIV: - return BCM_6348_USBH_PRIV_BASE; - case RSET_MPI: - return BCM_6348_MPI_BASE; - case RSET_PCMCIA: - return BCM_6348_PCMCIA_BASE; - case RSET_DSL: - return BCM_6348_DSL_BASE; - case RSET_ENET0: - return BCM_6348_ENET0_BASE; - case RSET_ENET1: - return BCM_6348_ENET1_BASE; - case RSET_ENETDMA: - return BCM_6348_ENETDMA_BASE; - case RSET_EHCI0: - return BCM_6348_EHCI0_BASE; - case RSET_SDRAM: - return BCM_6348_SDRAM_BASE; - case RSET_MEMC: - return BCM_6348_MEMC_BASE; - case RSET_DDR: - return BCM_6348_DDR_BASE; - } + __GEN_RSET(6348) #endif #ifdef CONFIG_BCM63XX_CPU_6358 - switch (set) { - case RSET_DSL_LMEM: - return BCM_6358_DSL_LMEM_BASE; - case RSET_PERF: - return BCM_6358_PERF_BASE; - case RSET_TIMER: - return BCM_6358_TIMER_BASE; - case RSET_WDT: - return BCM_6358_WDT_BASE; - case RSET_UART0: - return BCM_6358_UART0_BASE; - case RSET_UART1: - return BCM_6358_UART1_BASE; - case RSET_GPIO: - return BCM_6358_GPIO_BASE; - case RSET_SPI: - return BCM_6358_SPI_BASE; - case RSET_UDC0: - return BCM_6358_UDC0_BASE; - case RSET_OHCI0: - return BCM_6358_OHCI0_BASE; - case RSET_OHCI_PRIV: - return BCM_6358_OHCI_PRIV_BASE; - case RSET_USBH_PRIV: - return BCM_6358_USBH_PRIV_BASE; - case RSET_MPI: - return BCM_6358_MPI_BASE; - case RSET_PCMCIA: - return BCM_6358_PCMCIA_BASE; - case RSET_ENET0: - return BCM_6358_ENET0_BASE; - case RSET_ENET1: - return BCM_6358_ENET1_BASE; - case RSET_ENETDMA: - return BCM_6358_ENETDMA_BASE; - case RSET_DSL: - return BCM_6358_DSL_BASE; - case RSET_EHCI0: - return BCM_6358_EHCI0_BASE; - case RSET_SDRAM: - return BCM_6358_SDRAM_BASE; - case RSET_MEMC: - return BCM_6358_MEMC_BASE; - case RSET_DDR: - return BCM_6358_DDR_BASE; - } + __GEN_RSET(6358) +#endif +#ifdef CONFIG_BCM63XX_CPU_6368 + __GEN_RSET(6368) #endif #endif /* unreached */ @@ -449,75 +486,114 @@ enum bcm63xx_irq { IRQ_ENET_PHY, IRQ_OHCI0, IRQ_EHCI0, - IRQ_PCMCIA0, IRQ_ENET0_RXDMA, IRQ_ENET0_TXDMA, IRQ_ENET1_RXDMA, IRQ_ENET1_TXDMA, IRQ_PCI, IRQ_PCMCIA, + IRQ_ATM, + IRQ_ENETSW_RXDMA0, + IRQ_ENETSW_RXDMA1, + IRQ_ENETSW_RXDMA2, + IRQ_ENETSW_RXDMA3, + IRQ_ENETSW_TXDMA0, + IRQ_ENETSW_TXDMA1, + IRQ_ENETSW_TXDMA2, + IRQ_ENETSW_TXDMA3, + IRQ_XTM, + IRQ_XTM_DMA0, }; /* * 6338 irqs */ #define BCM_6338_TIMER_IRQ (IRQ_INTERNAL_BASE + 0) -#define BCM_6338_SPI_IRQ (IRQ_INTERNAL_BASE + 1) #define BCM_6338_UART0_IRQ (IRQ_INTERNAL_BASE + 2) -#define BCM_6338_DG_IRQ (IRQ_INTERNAL_BASE + 4) +#define BCM_6338_UART1_IRQ 0 #define BCM_6338_DSL_IRQ (IRQ_INTERNAL_BASE + 5) -#define BCM_6338_ATM_IRQ (IRQ_INTERNAL_BASE + 6) -#define BCM_6338_UDC0_IRQ (IRQ_INTERNAL_BASE + 7) #define BCM_6338_ENET0_IRQ (IRQ_INTERNAL_BASE + 8) +#define BCM_6338_ENET1_IRQ 0 #define BCM_6338_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 9) -#define BCM_6338_SDRAM_IRQ (IRQ_INTERNAL_BASE + 10) -#define BCM_6338_USB_CNTL_RX_DMA_IRQ (IRQ_INTERNAL_BASE + 11) -#define BCM_6338_USB_CNTL_TX_DMA_IRQ (IRQ_INTERNAL_BASE + 12) -#define BCM_6338_USB_BULK_RX_DMA_IRQ (IRQ_INTERNAL_BASE + 13) -#define BCM_6338_USB_BULK_TX_DMA_IRQ (IRQ_INTERNAL_BASE + 14) +#define BCM_6338_OHCI0_IRQ 0 +#define BCM_6338_EHCI0_IRQ 0 #define BCM_6338_ENET0_RXDMA_IRQ (IRQ_INTERNAL_BASE + 15) #define BCM_6338_ENET0_TXDMA_IRQ (IRQ_INTERNAL_BASE + 16) -#define BCM_6338_SDIO_IRQ (IRQ_INTERNAL_BASE + 17) +#define BCM_6338_ENET1_RXDMA_IRQ 0 +#define BCM_6338_ENET1_TXDMA_IRQ 0 +#define BCM_6338_PCI_IRQ 0 +#define BCM_6338_PCMCIA_IRQ 0 +#define BCM_6338_ATM_IRQ 0 +#define BCM_6338_ENETSW_RXDMA0_IRQ 0 +#define BCM_6338_ENETSW_RXDMA1_IRQ 0 +#define BCM_6338_ENETSW_RXDMA2_IRQ 0 +#define BCM_6338_ENETSW_RXDMA3_IRQ 0 +#define BCM_6338_ENETSW_TXDMA0_IRQ 0 +#define BCM_6338_ENETSW_TXDMA1_IRQ 0 +#define BCM_6338_ENETSW_TXDMA2_IRQ 0 +#define BCM_6338_ENETSW_TXDMA3_IRQ 0 +#define BCM_6338_XTM_IRQ 0 +#define BCM_6338_XTM_DMA0_IRQ 0 /* * 6345 irqs */ #define BCM_6345_TIMER_IRQ (IRQ_INTERNAL_BASE + 0) #define BCM_6345_UART0_IRQ (IRQ_INTERNAL_BASE + 2) +#define BCM_6345_UART1_IRQ 0 #define BCM_6345_DSL_IRQ (IRQ_INTERNAL_BASE + 3) -#define BCM_6345_ATM_IRQ (IRQ_INTERNAL_BASE + 4) -#define BCM_6345_USB_IRQ (IRQ_INTERNAL_BASE + 5) #define BCM_6345_ENET0_IRQ (IRQ_INTERNAL_BASE + 8) +#define BCM_6345_ENET1_IRQ 0 #define BCM_6345_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 12) +#define BCM_6345_OHCI0_IRQ 0 +#define BCM_6345_EHCI0_IRQ 0 #define BCM_6345_ENET0_RXDMA_IRQ (IRQ_INTERNAL_BASE + 13 + 1) #define BCM_6345_ENET0_TXDMA_IRQ (IRQ_INTERNAL_BASE + 13 + 2) -#define BCM_6345_EBI_RX_IRQ (IRQ_INTERNAL_BASE + 13 + 5) -#define BCM_6345_EBI_TX_IRQ (IRQ_INTERNAL_BASE + 13 + 6) -#define BCM_6345_RESERVED_RX_IRQ (IRQ_INTERNAL_BASE + 13 + 9) -#define BCM_6345_RESERVED_TX_IRQ (IRQ_INTERNAL_BASE + 13 + 10) -#define BCM_6345_USB_BULK_RX_DMA_IRQ (IRQ_INTERNAL_BASE + 13 + 13) -#define BCM_6345_USB_BULK_TX_DMA_IRQ (IRQ_INTERNAL_BASE + 13 + 14) -#define BCM_6345_USB_CNTL_RX_DMA_IRQ (IRQ_INTERNAL_BASE + 13 + 15) -#define BCM_6345_USB_CNTL_TX_DMA_IRQ (IRQ_INTERNAL_BASE + 13 + 16) -#define BCM_6345_USB_ISO_RX_DMA_IRQ (IRQ_INTERNAL_BASE + 13 + 17) -#define BCM_6345_USB_ISO_TX_DMA_IRQ (IRQ_INTERNAL_BASE + 13 + 18) +#define BCM_6345_ENET1_RXDMA_IRQ 0 +#define BCM_6345_ENET1_TXDMA_IRQ 0 +#define BCM_6345_PCI_IRQ 0 +#define BCM_6345_PCMCIA_IRQ 0 +#define BCM_6345_ATM_IRQ 0 +#define BCM_6345_ENETSW_RXDMA0_IRQ 0 +#define BCM_6345_ENETSW_RXDMA1_IRQ 0 +#define BCM_6345_ENETSW_RXDMA2_IRQ 0 +#define BCM_6345_ENETSW_RXDMA3_IRQ 0 +#define BCM_6345_ENETSW_TXDMA0_IRQ 0 +#define BCM_6345_ENETSW_TXDMA1_IRQ 0 +#define BCM_6345_ENETSW_TXDMA2_IRQ 0 +#define BCM_6345_ENETSW_TXDMA3_IRQ 0 +#define BCM_6345_XTM_IRQ 0 +#define BCM_6345_XTM_DMA0_IRQ 0 /* * 6348 irqs */ #define BCM_6348_TIMER_IRQ (IRQ_INTERNAL_BASE + 0) #define BCM_6348_UART0_IRQ (IRQ_INTERNAL_BASE + 2) +#define BCM_6348_UART1_IRQ 0 #define BCM_6348_DSL_IRQ (IRQ_INTERNAL_BASE + 4) -#define BCM_6348_ENET1_IRQ (IRQ_INTERNAL_BASE + 7) #define BCM_6348_ENET0_IRQ (IRQ_INTERNAL_BASE + 8) +#define BCM_6348_ENET1_IRQ (IRQ_INTERNAL_BASE + 7) #define BCM_6348_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 9) #define BCM_6348_OHCI0_IRQ (IRQ_INTERNAL_BASE + 12) +#define BCM_6348_EHCI0_IRQ 0 #define BCM_6348_ENET0_RXDMA_IRQ (IRQ_INTERNAL_BASE + 20) #define BCM_6348_ENET0_TXDMA_IRQ (IRQ_INTERNAL_BASE + 21) #define BCM_6348_ENET1_RXDMA_IRQ (IRQ_INTERNAL_BASE + 22) #define BCM_6348_ENET1_TXDMA_IRQ (IRQ_INTERNAL_BASE + 23) -#define BCM_6348_PCMCIA_IRQ (IRQ_INTERNAL_BASE + 24) #define BCM_6348_PCI_IRQ (IRQ_INTERNAL_BASE + 24) +#define BCM_6348_PCMCIA_IRQ (IRQ_INTERNAL_BASE + 24) +#define BCM_6348_ATM_IRQ (IRQ_INTERNAL_BASE + 5) +#define BCM_6348_ENETSW_RXDMA0_IRQ 0 +#define BCM_6348_ENETSW_RXDMA1_IRQ 0 +#define BCM_6348_ENETSW_RXDMA2_IRQ 0 +#define BCM_6348_ENETSW_RXDMA3_IRQ 0 +#define BCM_6348_ENETSW_TXDMA0_IRQ 0 +#define BCM_6348_ENETSW_TXDMA1_IRQ 0 +#define BCM_6348_ENETSW_TXDMA2_IRQ 0 +#define BCM_6348_ENETSW_TXDMA3_IRQ 0 +#define BCM_6348_XTM_IRQ 0 +#define BCM_6348_XTM_DMA0_IRQ 0 /* * 6358 irqs @@ -525,21 +601,108 @@ enum bcm63xx_irq { #define BCM_6358_TIMER_IRQ (IRQ_INTERNAL_BASE + 0) #define BCM_6358_UART0_IRQ (IRQ_INTERNAL_BASE + 2) #define BCM_6358_UART1_IRQ (IRQ_INTERNAL_BASE + 3) -#define BCM_6358_OHCI0_IRQ (IRQ_INTERNAL_BASE + 5) -#define BCM_6358_ENET1_IRQ (IRQ_INTERNAL_BASE + 6) +#define BCM_6358_DSL_IRQ (IRQ_INTERNAL_BASE + 29) #define BCM_6358_ENET0_IRQ (IRQ_INTERNAL_BASE + 8) +#define BCM_6358_ENET1_IRQ (IRQ_INTERNAL_BASE + 6) #define BCM_6358_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 9) +#define BCM_6358_OHCI0_IRQ (IRQ_INTERNAL_BASE + 5) #define BCM_6358_EHCI0_IRQ (IRQ_INTERNAL_BASE + 10) #define BCM_6358_ENET0_RXDMA_IRQ (IRQ_INTERNAL_BASE + 15) #define BCM_6358_ENET0_TXDMA_IRQ (IRQ_INTERNAL_BASE + 16) #define BCM_6358_ENET1_RXDMA_IRQ (IRQ_INTERNAL_BASE + 17) #define BCM_6358_ENET1_TXDMA_IRQ (IRQ_INTERNAL_BASE + 18) -#define BCM_6358_DSL_IRQ (IRQ_INTERNAL_BASE + 29) #define BCM_6358_PCI_IRQ (IRQ_INTERNAL_BASE + 31) #define BCM_6358_PCMCIA_IRQ (IRQ_INTERNAL_BASE + 24) +#define BCM_6358_ATM_IRQ (IRQ_INTERNAL_BASE + 19) +#define BCM_6358_ENETSW_RXDMA0_IRQ 0 +#define BCM_6358_ENETSW_RXDMA1_IRQ 0 +#define BCM_6358_ENETSW_RXDMA2_IRQ 0 +#define BCM_6358_ENETSW_RXDMA3_IRQ 0 +#define BCM_6358_ENETSW_TXDMA0_IRQ 0 +#define BCM_6358_ENETSW_TXDMA1_IRQ 0 +#define BCM_6358_ENETSW_TXDMA2_IRQ 0 +#define BCM_6358_ENETSW_TXDMA3_IRQ 0 +#define BCM_6358_XTM_IRQ 0 +#define BCM_6358_XTM_DMA0_IRQ 0 + +#define BCM_6358_PCM_DMA0_IRQ (IRQ_INTERNAL_BASE + 23) +#define BCM_6358_PCM_DMA1_IRQ (IRQ_INTERNAL_BASE + 24) +#define BCM_6358_EXT_IRQ0 (IRQ_INTERNAL_BASE + 25) +#define BCM_6358_EXT_IRQ1 (IRQ_INTERNAL_BASE + 26) +#define BCM_6358_EXT_IRQ2 (IRQ_INTERNAL_BASE + 27) +#define BCM_6358_EXT_IRQ3 (IRQ_INTERNAL_BASE + 28) + +/* + * 6368 irqs + */ +#define BCM_6368_HIGH_IRQ_BASE (IRQ_INTERNAL_BASE + 32) + +#define BCM_6368_TIMER_IRQ (IRQ_INTERNAL_BASE + 0) +#define BCM_6368_UART0_IRQ (IRQ_INTERNAL_BASE + 2) +#define BCM_6368_UART1_IRQ (IRQ_INTERNAL_BASE + 3) +#define BCM_6368_DSL_IRQ (IRQ_INTERNAL_BASE + 4) +#define BCM_6368_ENET0_IRQ 0 +#define BCM_6368_ENET1_IRQ 0 +#define BCM_6368_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 15) +#define BCM_6368_OHCI0_IRQ (IRQ_INTERNAL_BASE + 5) +#define BCM_6368_EHCI0_IRQ (IRQ_INTERNAL_BASE + 7) +#define BCM_6368_PCMCIA_IRQ 0 +#define BCM_6368_ENET0_RXDMA_IRQ 0 +#define BCM_6368_ENET0_TXDMA_IRQ 0 +#define BCM_6368_ENET1_RXDMA_IRQ 0 +#define BCM_6368_ENET1_TXDMA_IRQ 0 +#define BCM_6368_PCI_IRQ (IRQ_INTERNAL_BASE + 13) +#define BCM_6368_ATM_IRQ 0 +#define BCM_6368_ENETSW_RXDMA0_IRQ (BCM_6368_HIGH_IRQ_BASE + 0) +#define BCM_6368_ENETSW_RXDMA1_IRQ (BCM_6368_HIGH_IRQ_BASE + 1) +#define BCM_6368_ENETSW_RXDMA2_IRQ (BCM_6368_HIGH_IRQ_BASE + 2) +#define BCM_6368_ENETSW_RXDMA3_IRQ (BCM_6368_HIGH_IRQ_BASE + 3) +#define BCM_6368_ENETSW_TXDMA0_IRQ (BCM_6368_HIGH_IRQ_BASE + 4) +#define BCM_6368_ENETSW_TXDMA1_IRQ (BCM_6368_HIGH_IRQ_BASE + 5) +#define BCM_6368_ENETSW_TXDMA2_IRQ (BCM_6368_HIGH_IRQ_BASE + 6) +#define BCM_6368_ENETSW_TXDMA3_IRQ (BCM_6368_HIGH_IRQ_BASE + 7) +#define BCM_6368_XTM_IRQ (IRQ_INTERNAL_BASE + 11) +#define BCM_6368_XTM_DMA0_IRQ (BCM_6368_HIGH_IRQ_BASE + 8) + +#define BCM_6368_PCM_DMA0_IRQ (BCM_6368_HIGH_IRQ_BASE + 30) +#define BCM_6368_PCM_DMA1_IRQ (BCM_6368_HIGH_IRQ_BASE + 31) +#define BCM_6368_EXT_IRQ0 (IRQ_INTERNAL_BASE + 20) +#define BCM_6368_EXT_IRQ1 (IRQ_INTERNAL_BASE + 21) +#define BCM_6368_EXT_IRQ2 (IRQ_INTERNAL_BASE + 22) +#define BCM_6368_EXT_IRQ3 (IRQ_INTERNAL_BASE + 23) +#define BCM_6368_EXT_IRQ4 (IRQ_INTERNAL_BASE + 24) +#define BCM_6368_EXT_IRQ5 (IRQ_INTERNAL_BASE + 25) extern const int *bcm63xx_irqs; +#define __GEN_CPU_IRQ_TABLE(__cpu) \ + [IRQ_TIMER] = BCM_## __cpu ##_TIMER_IRQ, \ + [IRQ_UART0] = BCM_## __cpu ##_UART0_IRQ, \ + [IRQ_UART1] = BCM_## __cpu ##_UART1_IRQ, \ + [IRQ_DSL] = BCM_## __cpu ##_DSL_IRQ, \ + [IRQ_ENET0] = BCM_## __cpu ##_ENET0_IRQ, \ + [IRQ_ENET1] = BCM_## __cpu ##_ENET1_IRQ, \ + [IRQ_ENET_PHY] = BCM_## __cpu ##_ENET_PHY_IRQ, \ + [IRQ_OHCI0] = BCM_## __cpu ##_OHCI0_IRQ, \ + [IRQ_EHCI0] = BCM_## __cpu ##_EHCI0_IRQ, \ + [IRQ_ENET0_RXDMA] = BCM_## __cpu ##_ENET0_RXDMA_IRQ, \ + [IRQ_ENET0_TXDMA] = BCM_## __cpu ##_ENET0_TXDMA_IRQ, \ + [IRQ_ENET1_RXDMA] = BCM_## __cpu ##_ENET1_RXDMA_IRQ, \ + [IRQ_ENET1_TXDMA] = BCM_## __cpu ##_ENET1_TXDMA_IRQ, \ + [IRQ_PCI] = BCM_## __cpu ##_PCI_IRQ, \ + [IRQ_PCMCIA] = BCM_## __cpu ##_PCMCIA_IRQ, \ + [IRQ_ATM] = BCM_## __cpu ##_ATM_IRQ, \ + [IRQ_ENETSW_RXDMA0] = BCM_## __cpu ##_ENETSW_RXDMA0_IRQ, \ + [IRQ_ENETSW_RXDMA1] = BCM_## __cpu ##_ENETSW_RXDMA1_IRQ, \ + [IRQ_ENETSW_RXDMA2] = BCM_## __cpu ##_ENETSW_RXDMA2_IRQ, \ + [IRQ_ENETSW_RXDMA3] = BCM_## __cpu ##_ENETSW_RXDMA3_IRQ, \ + [IRQ_ENETSW_TXDMA0] = BCM_## __cpu ##_ENETSW_TXDMA0_IRQ, \ + [IRQ_ENETSW_TXDMA1] = BCM_## __cpu ##_ENETSW_TXDMA1_IRQ, \ + [IRQ_ENETSW_TXDMA2] = BCM_## __cpu ##_ENETSW_TXDMA2_IRQ, \ + [IRQ_ENETSW_TXDMA3] = BCM_## __cpu ##_ENETSW_TXDMA3_IRQ, \ + [IRQ_XTM] = BCM_## __cpu ##_XTM_IRQ, \ + [IRQ_XTM_DMA0] = BCM_## __cpu ##_XTM_DMA0_IRQ, \ + static inline int bcm63xx_get_irq_number(enum bcm63xx_irq irq) { return bcm63xx_irqs[irq]; @@ -550,4 +713,8 @@ static inline int bcm63xx_get_irq_number(enum bcm63xx_irq irq) */ unsigned int bcm63xx_get_memory_size(void); +void bcm63xx_machine_halt(void); + +void bcm63xx_machine_reboot(void); + #endif /* !BCM63XX_CPU_H_ */ diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h index 3999ec0aa7f..3d5de96d403 100644 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h @@ -14,6 +14,8 @@ static inline unsigned long bcm63xx_gpio_count(void) return 8; case BCM6345_CPU_ID: return 16; + case BCM6368_CPU_ID: + return 38; case BCM6348_CPU_ID: default: return 37; diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h index 91180fac6ed..72477a6441d 100644 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h @@ -49,9 +49,11 @@ #define bcm_readb(a) (*(volatile unsigned char *) BCM_REGS_VA(a)) #define bcm_readw(a) (*(volatile unsigned short *) BCM_REGS_VA(a)) #define bcm_readl(a) (*(volatile unsigned int *) BCM_REGS_VA(a)) +#define bcm_readq(a) (*(volatile u64 *) BCM_REGS_VA(a)) #define bcm_writeb(v, a) (*(volatile unsigned char *) BCM_REGS_VA((a)) = (v)) #define bcm_writew(v, a) (*(volatile unsigned short *) BCM_REGS_VA((a)) = (v)) #define bcm_writel(v, a) (*(volatile unsigned int *) BCM_REGS_VA((a)) = (v)) +#define bcm_writeq(v, a) (*(volatile u64 *) BCM_REGS_VA((a)) = (v)) /* * IO helpers to access register set for current CPU diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h index 5f95577c821..0c3074b871b 100644 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h @@ -3,13 +3,11 @@ #include <bcm63xx_cpu.h> -#define IRQ_MIPS_BASE 0 #define IRQ_INTERNAL_BASE 8 - -#define IRQ_EXT_BASE (IRQ_MIPS_BASE + 3) -#define IRQ_EXT_0 (IRQ_EXT_BASE + 0) -#define IRQ_EXT_1 (IRQ_EXT_BASE + 1) -#define IRQ_EXT_2 (IRQ_EXT_BASE + 2) -#define IRQ_EXT_3 (IRQ_EXT_BASE + 3) +#define IRQ_EXTERNAL_BASE 100 +#define IRQ_EXT_0 (IRQ_EXTERNAL_BASE + 0) +#define IRQ_EXT_1 (IRQ_EXTERNAL_BASE + 1) +#define IRQ_EXT_2 (IRQ_EXTERNAL_BASE + 2) +#define IRQ_EXT_3 (IRQ_EXTERNAL_BASE + 3) #endif /* ! BCM63XX_IRQ_H_ */ diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h index 0ed5230243c..94d4faad29a 100644 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h @@ -83,30 +83,86 @@ CKCTL_6358_USBSU_EN | \ CKCTL_6358_EPHY_EN) +#define CKCTL_6368_VDSL_QPROC_EN (1 << 2) +#define CKCTL_6368_VDSL_AFE_EN (1 << 3) +#define CKCTL_6368_VDSL_BONDING_EN (1 << 4) +#define CKCTL_6368_VDSL_EN (1 << 5) +#define CKCTL_6368_PHYMIPS_EN (1 << 6) +#define CKCTL_6368_SWPKT_USB_EN (1 << 7) +#define CKCTL_6368_SWPKT_SAR_EN (1 << 8) +#define CKCTL_6368_SPI_CLK_EN (1 << 9) +#define CKCTL_6368_USBD_CLK_EN (1 << 10) +#define CKCTL_6368_SAR_CLK_EN (1 << 11) +#define CKCTL_6368_ROBOSW_CLK_EN (1 << 12) +#define CKCTL_6368_UTOPIA_CLK_EN (1 << 13) +#define CKCTL_6368_PCM_CLK_EN (1 << 14) +#define CKCTL_6368_USBH_CLK_EN (1 << 15) +#define CKCTL_6368_DISABLE_GLESS_EN (1 << 16) +#define CKCTL_6368_NAND_CLK_EN (1 << 17) +#define CKCTL_6368_IPSEC_CLK_EN (1 << 17) + +#define CKCTL_6368_ALL_SAFE_EN (CKCTL_6368_SWPKT_USB_EN | \ + CKCTL_6368_SWPKT_SAR_EN | \ + CKCTL_6368_SPI_CLK_EN | \ + CKCTL_6368_USBD_CLK_EN | \ + CKCTL_6368_SAR_CLK_EN | \ + CKCTL_6368_ROBOSW_CLK_EN | \ + CKCTL_6368_UTOPIA_CLK_EN | \ + CKCTL_6368_PCM_CLK_EN | \ + CKCTL_6368_USBH_CLK_EN | \ + CKCTL_6368_DISABLE_GLESS_EN | \ + CKCTL_6368_NAND_CLK_EN | \ + CKCTL_6368_IPSEC_CLK_EN) + /* System PLL Control register */ #define PERF_SYS_PLL_CTL_REG 0x8 #define SYS_PLL_SOFT_RESET 0x1 /* Interrupt Mask register */ -#define PERF_IRQMASK_REG 0xc +#define PERF_IRQMASK_6338_REG 0xc +#define PERF_IRQMASK_6345_REG 0xc +#define PERF_IRQMASK_6348_REG 0xc +#define PERF_IRQMASK_6358_REG 0xc +#define PERF_IRQMASK_6368_REG 0x20 /* Interrupt Status register */ -#define PERF_IRQSTAT_REG 0x10 +#define PERF_IRQSTAT_6338_REG 0x10 +#define PERF_IRQSTAT_6345_REG 0x10 +#define PERF_IRQSTAT_6348_REG 0x10 +#define PERF_IRQSTAT_6358_REG 0x10 +#define PERF_IRQSTAT_6368_REG 0x28 /* External Interrupt Configuration register */ -#define PERF_EXTIRQ_CFG_REG 0x14 +#define PERF_EXTIRQ_CFG_REG_6338 0x14 +#define PERF_EXTIRQ_CFG_REG_6348 0x14 +#define PERF_EXTIRQ_CFG_REG_6358 0x14 +#define PERF_EXTIRQ_CFG_REG_6368 0x18 + +#define PERF_EXTIRQ_CFG_REG2_6368 0x1c + +/* for 6348 only */ +#define EXTIRQ_CFG_SENSE_6348(x) (1 << (x)) +#define EXTIRQ_CFG_STAT_6348(x) (1 << (x + 5)) +#define EXTIRQ_CFG_CLEAR_6348(x) (1 << (x + 10)) +#define EXTIRQ_CFG_MASK_6348(x) (1 << (x + 15)) +#define EXTIRQ_CFG_BOTHEDGE_6348(x) (1 << (x + 20)) +#define EXTIRQ_CFG_LEVELSENSE_6348(x) (1 << (x + 25)) +#define EXTIRQ_CFG_CLEAR_ALL_6348 (0xf << 10) +#define EXTIRQ_CFG_MASK_ALL_6348 (0xf << 15) + +/* for all others */ #define EXTIRQ_CFG_SENSE(x) (1 << (x)) -#define EXTIRQ_CFG_STAT(x) (1 << (x + 5)) -#define EXTIRQ_CFG_CLEAR(x) (1 << (x + 10)) -#define EXTIRQ_CFG_MASK(x) (1 << (x + 15)) -#define EXTIRQ_CFG_BOTHEDGE(x) (1 << (x + 20)) -#define EXTIRQ_CFG_LEVELSENSE(x) (1 << (x + 25)) - -#define EXTIRQ_CFG_CLEAR_ALL (0xf << 10) -#define EXTIRQ_CFG_MASK_ALL (0xf << 15) +#define EXTIRQ_CFG_STAT(x) (1 << (x + 4)) +#define EXTIRQ_CFG_CLEAR(x) (1 << (x + 8)) +#define EXTIRQ_CFG_MASK(x) (1 << (x + 12)) +#define EXTIRQ_CFG_BOTHEDGE(x) (1 << (x + 16)) +#define EXTIRQ_CFG_LEVELSENSE(x) (1 << (x + 20)) +#define EXTIRQ_CFG_CLEAR_ALL (0xf << 8) +#define EXTIRQ_CFG_MASK_ALL (0xf << 12) /* Soft Reset register */ #define PERF_SOFTRESET_REG 0x28 +#define PERF_SOFTRESET_6368_REG 0x10 #define SOFTRESET_6338_SPI_MASK (1 << 0) #define SOFTRESET_6338_ENET_MASK (1 << 2) @@ -147,6 +203,15 @@ SOFTRESET_6348_ACLC_MASK | \ SOFTRESET_6348_ADSLMIPSPLL_MASK) +#define SOFTRESET_6368_SPI_MASK (1 << 0) +#define SOFTRESET_6368_MPI_MASK (1 << 3) +#define SOFTRESET_6368_EPHY_MASK (1 << 6) +#define SOFTRESET_6368_SAR_MASK (1 << 7) +#define SOFTRESET_6368_ENETSW_MASK (1 << 10) +#define SOFTRESET_6368_USBS_MASK (1 << 11) +#define SOFTRESET_6368_USBH_MASK (1 << 12) +#define SOFTRESET_6368_PCM_MASK (1 << 13) + /* MIPS PLL control register */ #define PERF_MIPSPLLCTL_REG 0x34 #define MIPSPLLCTL_N1_SHIFT 20 @@ -372,6 +437,7 @@ #define GPIO_CTL_LO_REG 0x4 #define GPIO_DATA_HI_REG 0x8 #define GPIO_DATA_LO_REG 0xC +#define GPIO_DATA_LO_REG_6345 0x8 /* GPIO mux registers and constants */ #define GPIO_MODE_REG 0x18 @@ -402,6 +468,44 @@ #define GPIO_MODE_6358_SERIAL_LED (1 << 10) #define GPIO_MODE_6358_UTOPIA (1 << 12) +#define GPIO_MODE_6368_ANALOG_AFE_0 (1 << 0) +#define GPIO_MODE_6368_ANALOG_AFE_1 (1 << 1) +#define GPIO_MODE_6368_SYS_IRQ (1 << 2) +#define GPIO_MODE_6368_SERIAL_LED_DATA (1 << 3) +#define GPIO_MODE_6368_SERIAL_LED_CLK (1 << 4) +#define GPIO_MODE_6368_INET_LED (1 << 5) +#define GPIO_MODE_6368_EPHY0_LED (1 << 6) +#define GPIO_MODE_6368_EPHY1_LED (1 << 7) +#define GPIO_MODE_6368_EPHY2_LED (1 << 8) +#define GPIO_MODE_6368_EPHY3_LED (1 << 9) +#define GPIO_MODE_6368_ROBOSW_LED_DAT (1 << 10) +#define GPIO_MODE_6368_ROBOSW_LED_CLK (1 << 11) +#define GPIO_MODE_6368_ROBOSW_LED0 (1 << 12) +#define GPIO_MODE_6368_ROBOSW_LED1 (1 << 13) +#define GPIO_MODE_6368_USBD_LED (1 << 14) +#define GPIO_MODE_6368_NTR_PULSE (1 << 15) +#define GPIO_MODE_6368_PCI_REQ1 (1 << 16) +#define GPIO_MODE_6368_PCI_GNT1 (1 << 17) +#define GPIO_MODE_6368_PCI_INTB (1 << 18) +#define GPIO_MODE_6368_PCI_REQ0 (1 << 19) +#define GPIO_MODE_6368_PCI_GNT0 (1 << 20) +#define GPIO_MODE_6368_PCMCIA_CD1 (1 << 22) +#define GPIO_MODE_6368_PCMCIA_CD2 (1 << 23) +#define GPIO_MODE_6368_PCMCIA_VS1 (1 << 24) +#define GPIO_MODE_6368_PCMCIA_VS2 (1 << 25) +#define GPIO_MODE_6368_EBI_CS2 (1 << 26) +#define GPIO_MODE_6368_EBI_CS3 (1 << 27) +#define GPIO_MODE_6368_SPI_SSN2 (1 << 28) +#define GPIO_MODE_6368_SPI_SSN3 (1 << 29) +#define GPIO_MODE_6368_SPI_SSN4 (1 << 30) +#define GPIO_MODE_6368_SPI_SSN5 (1 << 31) + + +#define GPIO_BASEMODE_6368_REG 0x38 +#define GPIO_BASEMODE_6368_UART2 0x1 +#define GPIO_BASEMODE_6368_GPIO 0x0 +#define GPIO_BASEMODE_6368_MASK 0x7 +/* those bits must be kept as read in gpio basemode register*/ /************************************************************************* * _REG relative to RSET_ENET @@ -548,6 +652,56 @@ /************************************************************************* + * _REG relative to RSET_ENETDMAC + *************************************************************************/ + +/* Channel Configuration register */ +#define ENETDMAC_CHANCFG_REG(x) ((x) * 0x10) +#define ENETDMAC_CHANCFG_EN_SHIFT 0 +#define ENETDMAC_CHANCFG_EN_MASK (1 << ENETDMA_CHANCFG_EN_SHIFT) +#define ENETDMAC_CHANCFG_PKTHALT_SHIFT 1 +#define ENETDMAC_CHANCFG_PKTHALT_MASK (1 << ENETDMA_CHANCFG_PKTHALT_SHIFT) + +/* Interrupt Control/Status register */ +#define ENETDMAC_IR_REG(x) (0x4 + (x) * 0x10) +#define ENETDMAC_IR_BUFDONE_MASK (1 << 0) +#define ENETDMAC_IR_PKTDONE_MASK (1 << 1) +#define ENETDMAC_IR_NOTOWNER_MASK (1 << 2) + +/* Interrupt Mask register */ +#define ENETDMAC_IRMASK_REG(x) (0x8 + (x) * 0x10) + +/* Maximum Burst Length */ +#define ENETDMAC_MAXBURST_REG(x) (0xc + (x) * 0x10) + + +/************************************************************************* + * _REG relative to RSET_ENETDMAS + *************************************************************************/ + +/* Ring Start Address register */ +#define ENETDMAS_RSTART_REG(x) ((x) * 0x10) + +/* State Ram Word 2 */ +#define ENETDMAS_SRAM2_REG(x) (0x4 + (x) * 0x10) + +/* State Ram Word 3 */ +#define ENETDMAS_SRAM3_REG(x) (0x8 + (x) * 0x10) + +/* State Ram Word 4 */ +#define ENETDMAS_SRAM4_REG(x) (0xc + (x) * 0x10) + + +/************************************************************************* + * _REG relative to RSET_ENETSW + *************************************************************************/ + +/* MIB register */ +#define ENETSW_MIB_REG(x) (0x2800 + (x) * 4) +#define ENETSW_MIB_REG_COUNT 47 + + +/************************************************************************* * _REG relative to RSET_OHCI_PRIV *************************************************************************/ @@ -562,7 +716,9 @@ * _REG relative to RSET_USBH_PRIV *************************************************************************/ -#define USBH_PRIV_SWAP_REG 0x0 +#define USBH_PRIV_SWAP_6358_REG 0x0 +#define USBH_PRIV_SWAP_6368_REG 0x1c + #define USBH_PRIV_SWAP_EHCI_ENDN_SHIFT 4 #define USBH_PRIV_SWAP_EHCI_ENDN_MASK (1 << USBH_PRIV_SWAP_EHCI_ENDN_SHIFT) #define USBH_PRIV_SWAP_EHCI_DATA_SHIFT 3 @@ -572,7 +728,13 @@ #define USBH_PRIV_SWAP_OHCI_DATA_SHIFT 0 #define USBH_PRIV_SWAP_OHCI_DATA_MASK (1 << USBH_PRIV_SWAP_OHCI_DATA_SHIFT) -#define USBH_PRIV_TEST_REG 0x24 +#define USBH_PRIV_TEST_6358_REG 0x24 +#define USBH_PRIV_TEST_6368_REG 0x14 + +#define USBH_PRIV_SETUP_6368_REG 0x28 +#define USBH_PRIV_SETUP_IOC_SHIFT 4 +#define USBH_PRIV_SETUP_IOC_MASK (1 << USBH_PRIV_SETUP_IOC_SHIFT) + /************************************************************************* @@ -734,6 +896,8 @@ #define SDRAM_CFG_BANK_SHIFT 13 #define SDRAM_CFG_BANK_MASK (1 << SDRAM_CFG_BANK_SHIFT) +#define SDRAM_MBASE_REG 0xc + #define SDRAM_PRIO_REG 0x2C #define SDRAM_PRIO_MIPS_SHIFT 29 #define SDRAM_PRIO_MIPS_MASK (1 << SDRAM_PRIO_MIPS_SHIFT) @@ -768,4 +932,45 @@ #define DMIPSPLLCFG_N2_SHIFT 29 #define DMIPSPLLCFG_N2_MASK (0x7 << DMIPSPLLCFG_N2_SHIFT) +#define DDR_DMIPSPLLCFG_6368_REG 0x20 +#define DMIPSPLLCFG_6368_P1_SHIFT 0 +#define DMIPSPLLCFG_6368_P1_MASK (0xf << DMIPSPLLCFG_6368_P1_SHIFT) +#define DMIPSPLLCFG_6368_P2_SHIFT 4 +#define DMIPSPLLCFG_6368_P2_MASK (0xf << DMIPSPLLCFG_6368_P2_SHIFT) +#define DMIPSPLLCFG_6368_NDIV_SHIFT 16 +#define DMIPSPLLCFG_6368_NDIV_MASK (0x1ff << DMIPSPLLCFG_6368_NDIV_SHIFT) + +#define DDR_DMIPSPLLDIV_6368_REG 0x24 +#define DMIPSPLLDIV_6368_MDIV_SHIFT 0 +#define DMIPSPLLDIV_6368_MDIV_MASK (0xff << DMIPSPLLDIV_6368_MDIV_SHIFT) + + +/************************************************************************* + * _REG relative to RSET_M2M + *************************************************************************/ + +#define M2M_RX 0 +#define M2M_TX 1 + +#define M2M_SRC_REG(x) ((x) * 0x40 + 0x00) +#define M2M_DST_REG(x) ((x) * 0x40 + 0x04) +#define M2M_SIZE_REG(x) ((x) * 0x40 + 0x08) + +#define M2M_CTRL_REG(x) ((x) * 0x40 + 0x0c) +#define M2M_CTRL_ENABLE_MASK (1 << 0) +#define M2M_CTRL_IRQEN_MASK (1 << 1) +#define M2M_CTRL_ERROR_CLR_MASK (1 << 6) +#define M2M_CTRL_DONE_CLR_MASK (1 << 7) +#define M2M_CTRL_NOINC_MASK (1 << 8) +#define M2M_CTRL_PCMCIASWAP_MASK (1 << 9) +#define M2M_CTRL_SWAPBYTE_MASK (1 << 10) +#define M2M_CTRL_ENDIAN_MASK (1 << 11) + +#define M2M_STAT_REG(x) ((x) * 0x40 + 0x10) +#define M2M_STAT_DONE (1 << 0) +#define M2M_STAT_ERROR (1 << 1) + +#define M2M_SRCID_REG(x) ((x) * 0x40 + 0x14) +#define M2M_DSTID_REG(x) ((x) * 0x40 + 0x18) + #endif /* BCM63XX_REGS_H_ */ diff --git a/arch/mips/include/asm/mach-bcm63xx/ioremap.h b/arch/mips/include/asm/mach-bcm63xx/ioremap.h new file mode 100644 index 00000000000..ef94ba73646 --- /dev/null +++ b/arch/mips/include/asm/mach-bcm63xx/ioremap.h @@ -0,0 +1,42 @@ +#ifndef BCM63XX_IOREMAP_H_ +#define BCM63XX_IOREMAP_H_ + +#include <bcm63xx_cpu.h> + +static inline phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size) +{ + return phys_addr; +} + +static inline int is_bcm63xx_internal_registers(phys_t offset) +{ + switch (bcm63xx_get_cpu_id()) { + case BCM6338_CPU_ID: + case BCM6345_CPU_ID: + case BCM6348_CPU_ID: + case BCM6358_CPU_ID: + if (offset >= 0xfff00000) + return 1; + break; + case BCM6368_CPU_ID: + if (offset >= 0xb0000000 && offset < 0xb1000000) + return 1; + break; + } + return 0; +} + +static inline void __iomem *plat_ioremap(phys_t offset, unsigned long size, + unsigned long flags) +{ + if (is_bcm63xx_internal_registers(offset)) + return (void __iomem *)offset; + return NULL; +} + +static inline int plat_iounmap(const volatile void __iomem *addr) +{ + return is_bcm63xx_internal_registers((unsigned long)addr); +} + +#endif /* BCM63XX_IOREMAP_H_ */ diff --git a/arch/mips/include/asm/mach-bcm63xx/irq.h b/arch/mips/include/asm/mach-bcm63xx/irq.h new file mode 100644 index 00000000000..9332e788a5c --- /dev/null +++ b/arch/mips/include/asm/mach-bcm63xx/irq.h @@ -0,0 +1,7 @@ +#ifndef __ASM_MACH_BCM63XX_IRQ_H +#define __ASM_MACH_BCM63XX_IRQ_H + +#define NR_IRQS 128 +#define MIPS_CPU_IRQ_BASE 0 + +#endif diff --git a/arch/mips/include/asm/mach-db1x00/bcsr.h b/arch/mips/include/asm/mach-db1x00/bcsr.h index 618d2de02ed..bb9fc23d853 100644 --- a/arch/mips/include/asm/mach-db1x00/bcsr.h +++ b/arch/mips/include/asm/mach-db1x00/bcsr.h @@ -34,6 +34,8 @@ #define PB1200_BCSR_PHYS_ADDR 0x0D800000 #define PB1200_BCSR_HEXLED_OFS 0x00400000 +#define DB1300_BCSR_PHYS_ADDR 0x19800000 +#define DB1300_BCSR_HEXLED_OFS 0x00400000 enum bcsr_id { /* BCSR base 1 */ @@ -105,6 +107,7 @@ enum bcsr_whoami_boards { BCSR_WHOAMI_PB1200 = BCSR_WHOAMI_PB1200_DDR1, BCSR_WHOAMI_PB1200_DDR2, BCSR_WHOAMI_DB1200, + BCSR_WHOAMI_DB1300, }; /* STATUS reg. Unless otherwise noted, they're valid on all boards. @@ -118,12 +121,12 @@ enum bcsr_whoami_boards { #define BCSR_STATUS_SRAMWIDTH 0x0080 #define BCSR_STATUS_FLASHBUSY 0x0100 #define BCSR_STATUS_ROMBUSY 0x0400 -#define BCSR_STATUS_SD0WP 0x0400 /* DB1200 */ +#define BCSR_STATUS_SD0WP 0x0400 /* DB1200/DB1300:SD1 */ #define BCSR_STATUS_SD1WP 0x0800 #define BCSR_STATUS_USBOTGID 0x0800 /* PB/DB1550 */ #define BCSR_STATUS_DB1000_SWAPBOOT 0x2000 -#define BCSR_STATUS_DB1200_SWAPBOOT 0x0040 /* DB1200 */ -#define BCSR_STATUS_IDECBLID 0x0200 /* DB1200 */ +#define BCSR_STATUS_DB1200_SWAPBOOT 0x0040 /* DB1200/1300 */ +#define BCSR_STATUS_IDECBLID 0x0200 /* DB1200/1300 */ #define BCSR_STATUS_DB1200_U0RXD 0x1000 /* DB1200 */ #define BCSR_STATUS_DB1200_U1RXD 0x2000 /* DB1200 */ #define BCSR_STATUS_FLASHDEN 0xC000 @@ -133,6 +136,11 @@ enum bcsr_whoami_boards { #define BCSR_STATUS_PB1550_U1RXD 0x2000 /* PB1550 */ #define BCSR_STATUS_PB1550_U3RXD 0x8000 /* PB1550 */ +#define BCSR_STATUS_CFWP 0x4000 /* DB1300 */ +#define BCSR_STATUS_USBOCn 0x2000 /* DB1300 */ +#define BCSR_STATUS_OTGOCn 0x1000 /* DB1300 */ +#define BCSR_STATUS_DCDMARQ 0x0010 /* DB1300 */ +#define BCSR_STATUS_IDEDMARQ 0x0020 /* DB1300 */ /* DB/PB1000,1100,1500,1550 */ #define BCSR_RESETS_PHY0 0x0001 @@ -155,17 +163,17 @@ enum bcsr_whoami_boards { #define BCSR_BOARD_GPIO200RST 0x0400 #define BCSR_BOARD_PCICLKOUT 0x0800 #define BCSR_BOARD_PCICFG 0x1000 -#define BCSR_BOARD_SPISEL 0x4000 /* PB/DB1550 */ +#define BCSR_BOARD_SPISEL 0x2000 /* PB/DB1550 */ #define BCSR_BOARD_SD0WP 0x4000 /* DB1100 */ #define BCSR_BOARD_SD1WP 0x8000 /* DB1100 */ -/* DB/PB1200 */ +/* DB/PB1200/1300 */ #define BCSR_RESETS_ETH 0x0001 #define BCSR_RESETS_CAMERA 0x0002 #define BCSR_RESETS_DC 0x0004 #define BCSR_RESETS_IDE 0x0008 -#define BCSR_RESETS_TV 0x0010 /* DB1200 */ +#define BCSR_RESETS_TV 0x0010 /* DB1200/1300 */ /* Not resets but in the same register */ #define BCSR_RESETS_PWMR1MUX 0x0800 /* DB1200 */ #define BCSR_RESETS_PB1200_WSCFSM 0x0800 /* PB1200 */ @@ -174,13 +182,22 @@ enum bcsr_whoami_boards { #define BCSR_RESETS_SPISEL 0x4000 #define BCSR_RESETS_SD1MUX 0x8000 /* PB1200 */ +#define BCSR_RESETS_VDDQSHDN 0x0200 /* DB1300 */ +#define BCSR_RESETS_OTPPGM 0x0400 /* DB1300 */ +#define BCSR_RESETS_OTPSCLK 0x0800 /* DB1300 */ +#define BCSR_RESETS_OTPWRPROT 0x1000 /* DB1300 */ +#define BCSR_RESETS_OTPCSB 0x2000 /* DB1300 */ +#define BCSR_RESETS_OTGPWR 0x4000 /* DB1300 */ +#define BCSR_RESETS_USBHPWR 0x8000 /* DB1300 */ + #define BCSR_BOARD_LCDVEE 0x0001 #define BCSR_BOARD_LCDVDD 0x0002 #define BCSR_BOARD_LCDBL 0x0004 #define BCSR_BOARD_CAMSNAP 0x0010 #define BCSR_BOARD_CAMPWR 0x0020 #define BCSR_BOARD_SD0PWR 0x0040 - +#define BCSR_BOARD_CAMCS 0x0010 /* DB1300 */ +#define BCSR_BOARD_HDMI_DE 0x0040 /* DB1300 */ #define BCSR_SWITCHES_DIP 0x00FF #define BCSR_SWITCHES_DIP_1 0x0080 @@ -214,7 +231,10 @@ enum bcsr_whoami_boards { #define BCSR_SYSTEM_RESET 0x8000 /* clear to reset */ #define BCSR_SYSTEM_PWROFF 0x4000 /* set to power off */ #define BCSR_SYSTEM_VDDI 0x001F /* PB1xxx boards */ - +#define BCSR_SYSTEM_DEBUGCSMASK 0x003F /* DB1300 */ +#define BCSR_SYSTEM_UDMAMODE 0x0100 /* DB1300 */ +#define BCSR_SYSTEM_WAKEONIRQ 0x0200 /* DB1300 */ +#define BCSR_SYSTEM_VDDI1300 0x3C00 /* DB1300 */ diff --git a/arch/mips/include/asm/mach-db1x00/db1200.h b/arch/mips/include/asm/mach-db1x00/db1200.h index 7a39657108c..b2a8319521e 100644 --- a/arch/mips/include/asm/mach-db1x00/db1200.h +++ b/arch/mips/include/asm/mach-db1x00/db1200.h @@ -43,15 +43,20 @@ #define BCSR_INT_PC1EJECT 0x0800 #define BCSR_INT_SD0INSERT 0x1000 #define BCSR_INT_SD0EJECT 0x2000 +#define BCSR_INT_SD1INSERT 0x4000 +#define BCSR_INT_SD1EJECT 0x8000 -#define IDE_PHYS_ADDR 0x18800000 #define IDE_REG_SHIFT 5 -#define DB1200_IDE_PHYS_ADDR IDE_PHYS_ADDR +#define DB1200_IDE_PHYS_ADDR 0x18800000 #define DB1200_IDE_PHYS_LEN (16 << IDE_REG_SHIFT) #define DB1200_ETH_PHYS_ADDR 0x19000300 #define DB1200_NAND_PHYS_ADDR 0x20000000 +#define PB1200_IDE_PHYS_ADDR 0x0C800000 +#define PB1200_ETH_PHYS_ADDR 0x0D000300 +#define PB1200_NAND_PHYS_ADDR 0x1C000000 + /* * External Interrupts for DBAu1200 as of 8/6/2004. * Bit positions in the CPLD registers can be calculated by taking @@ -77,6 +82,8 @@ enum external_db1200_ints { DB1200_PC1_EJECT_INT, DB1200_SD0_INSERT_INT, DB1200_SD0_EJECT_INT, + PB1200_SD1_INSERT_INT, + PB1200_SD1_EJECT_INT, DB1200_INT_END = DB1200_INT_BEGIN + 15, }; diff --git a/arch/mips/include/asm/mach-db1x00/db1300.h b/arch/mips/include/asm/mach-db1x00/db1300.h new file mode 100644 index 00000000000..7fe5fb3ba87 --- /dev/null +++ b/arch/mips/include/asm/mach-db1x00/db1300.h @@ -0,0 +1,40 @@ +/* + * NetLogic DB1300 board constants + */ + +#ifndef _DB1300_H_ +#define _DB1300_H_ + +/* FPGA (external mux) interrupt sources */ +#define DB1300_FIRST_INT (ALCHEMY_GPIC_INT_LAST + 1) +#define DB1300_IDE_INT (DB1300_FIRST_INT + 0) +#define DB1300_ETH_INT (DB1300_FIRST_INT + 1) +#define DB1300_CF_INT (DB1300_FIRST_INT + 2) +#define DB1300_VIDEO_INT (DB1300_FIRST_INT + 4) +#define DB1300_HDMI_INT (DB1300_FIRST_INT + 5) +#define DB1300_DC_INT (DB1300_FIRST_INT + 6) +#define DB1300_FLASH_INT (DB1300_FIRST_INT + 7) +#define DB1300_CF_INSERT_INT (DB1300_FIRST_INT + 8) +#define DB1300_CF_EJECT_INT (DB1300_FIRST_INT + 9) +#define DB1300_AC97_INT (DB1300_FIRST_INT + 10) +#define DB1300_AC97_PEN_INT (DB1300_FIRST_INT + 11) +#define DB1300_SD1_INSERT_INT (DB1300_FIRST_INT + 12) +#define DB1300_SD1_EJECT_INT (DB1300_FIRST_INT + 13) +#define DB1300_OTG_VBUS_OC_INT (DB1300_FIRST_INT + 14) +#define DB1300_HOST_VBUS_OC_INT (DB1300_FIRST_INT + 15) +#define DB1300_LAST_INT (DB1300_FIRST_INT + 15) + +/* SMSC9210 CS */ +#define DB1300_ETH_PHYS_ADDR 0x19000000 +#define DB1300_ETH_PHYS_END 0x197fffff + +/* ATA CS */ +#define DB1300_IDE_PHYS_ADDR 0x18800000 +#define DB1300_IDE_REG_SHIFT 5 +#define DB1300_IDE_PHYS_LEN (16 << DB1300_IDE_REG_SHIFT) + +/* NAND CS */ +#define DB1300_NAND_PHYS_ADDR 0x20000000 +#define DB1300_NAND_PHYS_END 0x20000fff + +#endif /* _DB1300_H_ */ diff --git a/arch/mips/include/asm/mach-db1x00/db1x00.h b/arch/mips/include/asm/mach-db1x00/db1x00.h deleted file mode 100644 index a5affb0568e..00000000000 --- a/arch/mips/include/asm/mach-db1x00/db1x00.h +++ /dev/null @@ -1,79 +0,0 @@ -/* - * AMD Alchemy DBAu1x00 Reference Boards - * - * Copyright 2001, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. <source@mvista.com> - * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org) - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - * - * - */ -#ifndef __ASM_DB1X00_H -#define __ASM_DB1X00_H - -#include <asm/mach-au1x00/au1xxx_psc.h> - -#ifdef CONFIG_MIPS_DB1550 - -#define DBDMA_AC97_TX_CHAN AU1550_DSCR_CMD0_PSC1_TX -#define DBDMA_AC97_RX_CHAN AU1550_DSCR_CMD0_PSC1_RX -#define DBDMA_I2S_TX_CHAN AU1550_DSCR_CMD0_PSC3_TX -#define DBDMA_I2S_RX_CHAN AU1550_DSCR_CMD0_PSC3_RX - -#define SPI_PSC_BASE AU1550_PSC0_PHYS_ADDR -#define AC97_PSC_BASE AU1550_PSC1_PHYS_ADDR -#define SMBUS_PSC_BASE AU1550_PSC2_PHYS_ADDR -#define I2S_PSC_BASE AU1550_PSC3_PHYS_ADDR - -#define NAND_PHYS_ADDR 0x20000000 - -#endif - -/* - * NAND defines - * - * Timing values as described in databook, * ns value stripped of the - * lower 2 bits. - * These defines are here rather than an Au1550 generic file because - * the parts chosen on another board may be different and may require - * different timings. - */ -#define NAND_T_H (18 >> 2) -#define NAND_T_PUL (30 >> 2) -#define NAND_T_SU (30 >> 2) -#define NAND_T_WH (30 >> 2) - -/* Bitfield shift amounts */ -#define NAND_T_H_SHIFT 0 -#define NAND_T_PUL_SHIFT 4 -#define NAND_T_SU_SHIFT 8 -#define NAND_T_WH_SHIFT 12 - -#define NAND_TIMING (((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \ - ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \ - ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \ - ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT)) -#define NAND_CS 1 - -/* Should be done by YAMON */ -#define NAND_STCFG 0x00400005 /* 8-bit NAND */ -#define NAND_STTIME 0x00007774 /* valid for 396 MHz SD=2 only */ -#define NAND_STADDR 0x12000FFF /* physical address 0x20000000 */ - -#endif /* __ASM_DB1X00_H */ diff --git a/arch/mips/include/asm/mach-db1x00/irq.h b/arch/mips/include/asm/mach-db1x00/irq.h new file mode 100644 index 00000000000..15b26693238 --- /dev/null +++ b/arch/mips/include/asm/mach-db1x00/irq.h @@ -0,0 +1,23 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003 by Ralf Baechle + */ +#ifndef __ASM_MACH_GENERIC_IRQ_H +#define __ASM_MACH_GENERIC_IRQ_H + + +#ifdef NR_IRQS +#undef NR_IRQS +#endif + +#ifndef MIPS_CPU_IRQ_BASE +#define MIPS_CPU_IRQ_BASE 0 +#endif + +/* 8 (MIPS) + 128 (au1300) + 16 (cpld) */ +#define NR_IRQS 152 + +#endif /* __ASM_MACH_GENERIC_IRQ_H */ diff --git a/arch/mips/include/asm/mach-generic/floppy.h b/arch/mips/include/asm/mach-generic/floppy.h index 001a8ce17c1..a38f4d43e5e 100644 --- a/arch/mips/include/asm/mach-generic/floppy.h +++ b/arch/mips/include/asm/mach-generic/floppy.h @@ -98,7 +98,7 @@ static inline void fd_disable_irq(void) static inline int fd_request_irq(void) { return request_irq(FLOPPY_IRQ, floppy_interrupt, - IRQF_DISABLED, "floppy", NULL); + 0, "floppy", NULL); } static inline void fd_free_irq(void) diff --git a/arch/mips/include/asm/mach-jazz/floppy.h b/arch/mips/include/asm/mach-jazz/floppy.h index 56e9ca6ae42..88b5acb7514 100644 --- a/arch/mips/include/asm/mach-jazz/floppy.h +++ b/arch/mips/include/asm/mach-jazz/floppy.h @@ -90,7 +90,7 @@ static inline void fd_disable_irq(void) static inline int fd_request_irq(void) { return request_irq(FLOPPY_IRQ, floppy_interrupt, - IRQF_DISABLED, "floppy", NULL); + 0, "floppy", NULL); } static inline void fd_free_irq(void) diff --git a/arch/mips/include/asm/mach-netlogic/cpu-feature-overrides.h b/arch/mips/include/asm/mach-netlogic/cpu-feature-overrides.h index 3b728275b9b..d193fb68cf2 100644 --- a/arch/mips/include/asm/mach-netlogic/cpu-feature-overrides.h +++ b/arch/mips/include/asm/mach-netlogic/cpu-feature-overrides.h @@ -24,24 +24,33 @@ #define cpu_has_llsc 1 #define cpu_has_vtag_icache 0 -#define cpu_has_dc_aliases 0 -#define cpu_has_ic_fills_f_dc 0 +#define cpu_has_ic_fills_f_dc 1 #define cpu_has_dsp 0 #define cpu_has_mipsmt 0 -#define cpu_has_userlocal 0 -#define cpu_icache_snoops_remote_store 0 +#define cpu_icache_snoops_remote_store 1 -#define cpu_has_nofpuex 0 #define cpu_has_64bits 1 #define cpu_has_mips32r1 1 -#define cpu_has_mips32r2 0 #define cpu_has_mips64r1 1 -#define cpu_has_mips64r2 0 #define cpu_has_inclusive_pcaches 0 #define cpu_dcache_line_size() 32 #define cpu_icache_line_size() 32 +#if defined(CONFIG_CPU_XLR) +#define cpu_has_userlocal 0 +#define cpu_has_dc_aliases 0 +#define cpu_has_mips32r2 0 +#define cpu_has_mips64r2 0 +#elif defined(CONFIG_CPU_XLP) +#define cpu_has_userlocal 1 +#define cpu_has_mips32r2 1 +#define cpu_has_mips64r2 1 +#define cpu_has_dc_aliases 1 +#else +#error "Unknown Netlogic CPU" +#endif + #endif /* __ASM_MACH_NETLOGIC_CPU_FEATURE_OVERRIDES_H */ diff --git a/arch/mips/include/asm/mach-pb1x00/mc146818rtc.h b/arch/mips/include/asm/mach-pb1x00/mc146818rtc.h deleted file mode 100644 index 622c58710e5..00000000000 --- a/arch/mips/include/asm/mach-pb1x00/mc146818rtc.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1998, 2001, 03 by Ralf Baechle - * - * RTC routines for PC style attached Dallas chip. - */ -#ifndef __ASM_MACH_AU1XX_MC146818RTC_H -#define __ASM_MACH_AU1XX_MC146818RTC_H - -#include <asm/io.h> -#include <asm/mach-au1x00/au1000.h> - -#define RTC_PORT(x) (0x0c000000 + (x)) -#define RTC_IRQ 8 -#define PB1500_RTC_ADDR 0x0c000000 - -static inline unsigned char CMOS_READ(unsigned long offset) -{ - offset <<= 2; - return (u8)(au_readl(offset + PB1500_RTC_ADDR) & 0xff); -} - -static inline void CMOS_WRITE(unsigned char data, unsigned long offset) -{ - offset <<= 2; - au_writel(data, offset + PB1500_RTC_ADDR); -} - -#define RTC_ALWAYS_BCD 1 - -#endif /* __ASM_MACH_AU1XX_MC146818RTC_H */ diff --git a/arch/mips/include/asm/mach-pb1x00/pb1000.h b/arch/mips/include/asm/mach-pb1x00/pb1000.h deleted file mode 100644 index 65059255dc1..00000000000 --- a/arch/mips/include/asm/mach-pb1x00/pb1000.h +++ /dev/null @@ -1,87 +0,0 @@ -/* - * Alchemy Semi Pb1000 Reference Board - * - * Copyright 2001, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. <source@mvista.com> - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - * - * - */ -#ifndef __ASM_PB1000_H -#define __ASM_PB1000_H - -/* PCMCIA PB1000 specific defines */ -#define PCMCIA_MAX_SOCK 1 -#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1) - -#define PB1000_PCR 0xBE000000 -# define PCR_SLOT_0_VPP0 (1 << 0) -# define PCR_SLOT_0_VPP1 (1 << 1) -# define PCR_SLOT_0_VCC0 (1 << 2) -# define PCR_SLOT_0_VCC1 (1 << 3) -# define PCR_SLOT_0_RST (1 << 4) -# define PCR_SLOT_1_VPP0 (1 << 8) -# define PCR_SLOT_1_VPP1 (1 << 9) -# define PCR_SLOT_1_VCC0 (1 << 10) -# define PCR_SLOT_1_VCC1 (1 << 11) -# define PCR_SLOT_1_RST (1 << 12) - -#define PB1000_MDR 0xBE000004 -# define MDR_PI (1 << 5) /* PCMCIA int latch */ -# define MDR_EPI (1 << 14) /* enable PCMCIA int */ -# define MDR_CPI (1 << 15) /* clear PCMCIA int */ - -#define PB1000_ACR1 0xBE000008 -# define ACR1_SLOT_0_CD1 (1 << 0) /* card detect 1 */ -# define ACR1_SLOT_0_CD2 (1 << 1) /* card detect 2 */ -# define ACR1_SLOT_0_READY (1 << 2) /* ready */ -# define ACR1_SLOT_0_STATUS (1 << 3) /* status change */ -# define ACR1_SLOT_0_VS1 (1 << 4) /* voltage sense 1 */ -# define ACR1_SLOT_0_VS2 (1 << 5) /* voltage sense 2 */ -# define ACR1_SLOT_0_INPACK (1 << 6) /* inpack pin status */ -# define ACR1_SLOT_1_CD1 (1 << 8) /* card detect 1 */ -# define ACR1_SLOT_1_CD2 (1 << 9) /* card detect 2 */ -# define ACR1_SLOT_1_READY (1 << 10) /* ready */ -# define ACR1_SLOT_1_STATUS (1 << 11) /* status change */ -# define ACR1_SLOT_1_VS1 (1 << 12) /* voltage sense 1 */ -# define ACR1_SLOT_1_VS2 (1 << 13) /* voltage sense 2 */ -# define ACR1_SLOT_1_INPACK (1 << 14) /* inpack pin status */ - -#define CPLD_AUX0 0xBE00000C -#define CPLD_AUX1 0xBE000010 -#define CPLD_AUX2 0xBE000014 - -/* Voltage levels */ - -/* VPPEN1 - VPPEN0 */ -#define VPP_GND ((0 << 1) | (0 << 0)) -#define VPP_5V ((1 << 1) | (0 << 0)) -#define VPP_3V ((0 << 1) | (1 << 0)) -#define VPP_12V ((0 << 1) | (1 << 0)) -#define VPP_HIZ ((1 << 1) | (1 << 0)) - -/* VCCEN1 - VCCEN0 */ -#define VCC_3V ((0 << 1) | (1 << 0)) -#define VCC_5V ((1 << 1) | (0 << 0)) -#define VCC_HIZ ((0 << 1) | (0 << 0)) - -/* VPP/VCC */ -#define SET_VCC_VPP(VCC, VPP, SLOT) \ - ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8)) -#endif /* __ASM_PB1000_H */ diff --git a/arch/mips/include/asm/mach-pb1x00/pb1200.h b/arch/mips/include/asm/mach-pb1x00/pb1200.h deleted file mode 100644 index 374416adb65..00000000000 --- a/arch/mips/include/asm/mach-pb1x00/pb1200.h +++ /dev/null @@ -1,139 +0,0 @@ -/* - * AMD Alchemy Pb1200 Reference Board - * Board Registers defines. - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - * - * - */ -#ifndef __ASM_PB1200_H -#define __ASM_PB1200_H - -#include <linux/types.h> -#include <asm/mach-au1x00/au1000.h> -#include <asm/mach-au1x00/au1xxx_psc.h> - -#define DBDMA_AC97_TX_CHAN AU1200_DSCR_CMD0_PSC1_TX -#define DBDMA_AC97_RX_CHAN AU1200_DSCR_CMD0_PSC1_RX -#define DBDMA_I2S_TX_CHAN AU1200_DSCR_CMD0_PSC1_TX -#define DBDMA_I2S_RX_CHAN AU1200_DSCR_CMD0_PSC1_RX - -/* - * SPI and SMB are muxed on the Pb1200 board. - * Refer to board documentation. - */ -#define SPI_PSC_BASE AU1550_PSC0_PHYS_ADDR -#define SMBUS_PSC_BASE AU1550_PSC0_PHYS_ADDR -/* - * AC97 and I2S are muxed on the Pb1200 board. - * Refer to board documentation. - */ -#define AC97_PSC_BASE AU1550_PSC1_PHYS_ADDR -#define I2S_PSC_BASE AU1550_PSC1_PHYS_ADDR - - -#define BCSR_SYSTEM_VDDI 0x001F -#define BCSR_SYSTEM_POWEROFF 0x4000 -#define BCSR_SYSTEM_RESET 0x8000 - -/* Bit positions for the different interrupt sources */ -#define BCSR_INT_IDE 0x0001 -#define BCSR_INT_ETH 0x0002 -#define BCSR_INT_PC0 0x0004 -#define BCSR_INT_PC0STSCHG 0x0008 -#define BCSR_INT_PC1 0x0010 -#define BCSR_INT_PC1STSCHG 0x0020 -#define BCSR_INT_DC 0x0040 -#define BCSR_INT_FLASHBUSY 0x0080 -#define BCSR_INT_PC0INSERT 0x0100 -#define BCSR_INT_PC0EJECT 0x0200 -#define BCSR_INT_PC1INSERT 0x0400 -#define BCSR_INT_PC1EJECT 0x0800 -#define BCSR_INT_SD0INSERT 0x1000 -#define BCSR_INT_SD0EJECT 0x2000 -#define BCSR_INT_SD1INSERT 0x4000 -#define BCSR_INT_SD1EJECT 0x8000 - -#define SMC91C111_PHYS_ADDR 0x0D000300 -#define SMC91C111_INT PB1200_ETH_INT - -#define IDE_PHYS_ADDR 0x0C800000 -#define IDE_REG_SHIFT 5 -#define IDE_PHYS_LEN (16 << IDE_REG_SHIFT) -#define IDE_INT PB1200_IDE_INT - -#define NAND_PHYS_ADDR 0x1C000000 - -/* - * Timing values as described in databook, * ns value stripped of - * lower 2 bits. - * These defines are here rather than an Au1200 generic file because - * the parts chosen on another board may be different and may require - * different timings. - */ -#define NAND_T_H (18 >> 2) -#define NAND_T_PUL (30 >> 2) -#define NAND_T_SU (30 >> 2) -#define NAND_T_WH (30 >> 2) - -/* Bitfield shift amounts */ -#define NAND_T_H_SHIFT 0 -#define NAND_T_PUL_SHIFT 4 -#define NAND_T_SU_SHIFT 8 -#define NAND_T_WH_SHIFT 12 - -#define NAND_TIMING (((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \ - ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \ - ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \ - ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT)) - -/* - * External Interrupts for Pb1200 as of 8/6/2004. - * Bit positions in the CPLD registers can be calculated by taking - * the interrupt define and subtracting the PB1200_INT_BEGIN value. - * - * Example: IDE bis pos is = 64 - 64 - * ETH bit pos is = 65 - 64 - */ -enum external_pb1200_ints { - PB1200_INT_BEGIN = AU1000_MAX_INTR + 1, - - PB1200_IDE_INT = PB1200_INT_BEGIN, - PB1200_ETH_INT, - PB1200_PC0_INT, - PB1200_PC0_STSCHG_INT, - PB1200_PC1_INT, - PB1200_PC1_STSCHG_INT, - PB1200_DC_INT, - PB1200_FLASHBUSY_INT, - PB1200_PC0_INSERT_INT, - PB1200_PC0_EJECT_INT, - PB1200_PC1_INSERT_INT, - PB1200_PC1_EJECT_INT, - PB1200_SD0_INSERT_INT, - PB1200_SD0_EJECT_INT, - PB1200_SD1_INSERT_INT, - PB1200_SD1_EJECT_INT, - - PB1200_INT_END = PB1200_INT_BEGIN + 15 -}; - -/* NAND chip select */ -#define NAND_CS 1 - -#endif /* __ASM_PB1200_H */ diff --git a/arch/mips/include/asm/mach-pb1x00/pb1550.h b/arch/mips/include/asm/mach-pb1x00/pb1550.h deleted file mode 100644 index 443b88adebf..00000000000 --- a/arch/mips/include/asm/mach-pb1x00/pb1550.h +++ /dev/null @@ -1,73 +0,0 @@ -/* - * AMD Alchemy Semi PB1550 Reference Board - * Board Registers defines. - * - * Copyright 2004 Embedded Edge LLC. - * Copyright 2005 Ralf Baechle (ralf@linux-mips.org) - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - * - * - */ -#ifndef __ASM_PB1550_H -#define __ASM_PB1550_H - -#include <linux/types.h> -#include <asm/mach-au1x00/au1xxx_psc.h> - -#define DBDMA_AC97_TX_CHAN AU1550_DSCR_CMD0_PSC1_TX -#define DBDMA_AC97_RX_CHAN AU1550_DSCR_CMD0_PSC1_RX -#define DBDMA_I2S_TX_CHAN AU1550_DSCR_CMD0_PSC3_TX -#define DBDMA_I2S_RX_CHAN AU1550_DSCR_CMD0_PSC3_RX - -#define SPI_PSC_BASE AU1550_PSC0_PHYS_ADDR -#define AC97_PSC_BASE AU1550_PSC1_PHYS_ADDR -#define SMBUS_PSC_BASE AU1550_PSC2_PHYS_ADDR -#define I2S_PSC_BASE AU1550_PSC3_PHYS_ADDR - -/* - * Timing values as described in databook, * ns value stripped of - * lower 2 bits. - * These defines are here rather than an SOC1550 generic file because - * the parts chosen on another board may be different and may require - * different timings. - */ -#define NAND_T_H (18 >> 2) -#define NAND_T_PUL (30 >> 2) -#define NAND_T_SU (30 >> 2) -#define NAND_T_WH (30 >> 2) - -/* Bitfield shift amounts */ -#define NAND_T_H_SHIFT 0 -#define NAND_T_PUL_SHIFT 4 -#define NAND_T_SU_SHIFT 8 -#define NAND_T_WH_SHIFT 12 - -#define NAND_TIMING (((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \ - ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \ - ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \ - ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT)) - -#define NAND_CS 1 - -/* Should be done by YAMON */ -#define NAND_STCFG 0x00400005 /* 8-bit NAND */ -#define NAND_STTIME 0x00007774 /* valid for 396 MHz SD=2 only */ -#define NAND_STADDR 0x12000FFF /* physical address 0x20000000 */ - -#endif /* __ASM_PB1550_H */ diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h index 2ea7b817feb..7f87d824eeb 100644 --- a/arch/mips/include/asm/mipsregs.h +++ b/arch/mips/include/asm/mipsregs.h @@ -1106,7 +1106,7 @@ do { \ #define read_c0_brcm_reset() __read_32bit_c0_register($22, 5) #define write_c0_brcm_reset(val) __write_32bit_c0_register($22, 5, val) -/* BMIPS4380 */ +/* BMIPS43xx */ #define read_c0_brcm_cmt_intr() __read_32bit_c0_register($22, 1) #define write_c0_brcm_cmt_intr(val) __write_32bit_c0_register($22, 1, val) @@ -1667,6 +1667,13 @@ __BUILD_SET_C0(config) __BUILD_SET_C0(intcontrol) __BUILD_SET_C0(intctl) __BUILD_SET_C0(srsmap) +__BUILD_SET_C0(brcm_config_0) +__BUILD_SET_C0(brcm_bus_pll) +__BUILD_SET_C0(brcm_reset) +__BUILD_SET_C0(brcm_cmt_intr) +__BUILD_SET_C0(brcm_cmt_ctrl) +__BUILD_SET_C0(brcm_config) +__BUILD_SET_C0(brcm_mode) #endif /* !__ASSEMBLY__ */ diff --git a/arch/mips/include/asm/module.h b/arch/mips/include/asm/module.h index bc01a02cacd..7467d1d933d 100644 --- a/arch/mips/include/asm/module.h +++ b/arch/mips/include/asm/module.h @@ -74,7 +74,9 @@ search_module_dbetables(unsigned long addr) } #endif -#ifdef CONFIG_CPU_MIPS32_R1 +#ifdef CONFIG_CPU_BMIPS +#define MODULE_PROC_FAMILY "BMIPS " +#elif defined CONFIG_CPU_MIPS32_R1 #define MODULE_PROC_FAMILY "MIPS32_R1 " #elif defined CONFIG_CPU_MIPS32_R2 #define MODULE_PROC_FAMILY "MIPS32_R2 " @@ -120,6 +122,8 @@ search_module_dbetables(unsigned long addr) #define MODULE_PROC_FAMILY "OCTEON " #elif defined CONFIG_CPU_XLR #define MODULE_PROC_FAMILY "XLR " +#elif defined CONFIG_CPU_XLP +#define MODULE_PROC_FAMILY "XLP " #else #error MODULE_PROC_FAMILY undefined for your processor configuration #endif diff --git a/arch/mips/include/asm/netlogic/common.h b/arch/mips/include/asm/netlogic/common.h new file mode 100644 index 00000000000..fdd2f44c7b5 --- /dev/null +++ b/arch/mips/include/asm/netlogic/common.h @@ -0,0 +1,76 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _NETLOGIC_COMMON_H_ +#define _NETLOGIC_COMMON_H_ + +/* + * Common SMP definitions + */ +#define RESET_VEC_PHYS 0x1fc00000 +#define RESET_DATA_PHYS (RESET_VEC_PHYS + (1<<10)) +#define BOOT_THREAD_MODE 0 +#define BOOT_NMI_LOCK 4 +#define BOOT_NMI_HANDLER 8 + +#ifndef __ASSEMBLY__ +struct irq_desc; +extern struct plat_smp_ops nlm_smp_ops; +extern char nlm_reset_entry[], nlm_reset_entry_end[]; +void nlm_smp_function_ipi_handler(unsigned int irq, struct irq_desc *desc); +void nlm_smp_resched_ipi_handler(unsigned int irq, struct irq_desc *desc); +void nlm_smp_irq_init(void); +void nlm_boot_secondary_cpus(void); +int nlm_wakeup_secondary_cpus(u32 wakeup_mask); +void nlm_rmiboot_preboot(void); + +static inline void +nlm_set_nmi_handler(void *handler) +{ + char *reset_data; + + reset_data = (char *)CKSEG1ADDR(RESET_DATA_PHYS); + *(int64_t *)(reset_data + BOOT_NMI_HANDLER) = (long)handler; +} + +/* + * Misc. + */ +unsigned int nlm_get_cpu_frequency(void); + +extern unsigned long nlm_common_ebase; +extern int nlm_threads_per_core; +extern uint32_t nlm_cpumask, nlm_coremask; +#endif +#endif /* _NETLOGIC_COMMON_H_ */ diff --git a/arch/mips/include/asm/netlogic/haldefs.h b/arch/mips/include/asm/netlogic/haldefs.h new file mode 100644 index 00000000000..72a0c788b47 --- /dev/null +++ b/arch/mips/include/asm/netlogic/haldefs.h @@ -0,0 +1,163 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef __NLM_HAL_HALDEFS_H__ +#define __NLM_HAL_HALDEFS_H__ + +/* + * This file contains platform specific memory mapped IO implementation + * and will provide a way to read 32/64 bit memory mapped registers in + * all ABIs + */ +#if !defined(CONFIG_64BIT) && defined(CONFIG_CPU_XLP) +#error "o32 compile not supported on XLP yet" +#endif +/* + * For o32 compilation, we have to disable interrupts and enable KX bit to + * access 64 bit addresses or data. + * + * We need to disable interrupts because we save just the lower 32 bits of + * registers in interrupt handling. So if we get hit by an interrupt while + * using the upper 32 bits of a register, we lose. + */ +static inline uint32_t nlm_save_flags_kx(void) +{ + return change_c0_status(ST0_KX | ST0_IE, ST0_KX); +} + +static inline uint32_t nlm_save_flags_cop2(void) +{ + return change_c0_status(ST0_CU2 | ST0_IE, ST0_CU2); +} + +static inline void nlm_restore_flags(uint32_t sr) +{ + write_c0_status(sr); +} + +/* + * The n64 implementations are simple, the o32 implementations when they + * are added, will have to disable interrupts and enable KX before doing + * 64 bit ops. + */ +static inline uint32_t +nlm_read_reg(uint64_t base, uint32_t reg) +{ + volatile uint32_t *addr = (volatile uint32_t *)(long)base + reg; + + return *addr; +} + +static inline void +nlm_write_reg(uint64_t base, uint32_t reg, uint32_t val) +{ + volatile uint32_t *addr = (volatile uint32_t *)(long)base + reg; + + *addr = val; +} + +static inline uint64_t +nlm_read_reg64(uint64_t base, uint32_t reg) +{ + uint64_t addr = base + (reg >> 1) * sizeof(uint64_t); + volatile uint64_t *ptr = (volatile uint64_t *)(long)addr; + + return *ptr; +} + +static inline void +nlm_write_reg64(uint64_t base, uint32_t reg, uint64_t val) +{ + uint64_t addr = base + (reg >> 1) * sizeof(uint64_t); + volatile uint64_t *ptr = (volatile uint64_t *)(long)addr; + + *ptr = val; +} + +/* + * Routines to store 32/64 bit values to 64 bit addresses, + * used when going thru XKPHYS to access registers + */ +static inline uint32_t +nlm_read_reg_xkphys(uint64_t base, uint32_t reg) +{ + return nlm_read_reg(base, reg); +} + +static inline void +nlm_write_reg_xkphys(uint64_t base, uint32_t reg, uint32_t val) +{ + nlm_write_reg(base, reg, val); +} + +static inline uint64_t +nlm_read_reg64_xkphys(uint64_t base, uint32_t reg) +{ + return nlm_read_reg64(base, reg); +} + +static inline void +nlm_write_reg64_xkphys(uint64_t base, uint32_t reg, uint64_t val) +{ + nlm_write_reg64(base, reg, val); +} + +/* Location where IO base is mapped */ +extern uint64_t nlm_io_base; + +#if defined(CONFIG_CPU_XLP) +static inline uint64_t +nlm_pcicfg_base(uint32_t devoffset) +{ + return nlm_io_base + devoffset; +} + +static inline uint64_t +nlm_xkphys_map_pcibar0(uint64_t pcibase) +{ + uint64_t paddr; + + paddr = nlm_read_reg(pcibase, 0x4) & ~0xfu; + return (uint64_t)0x9000000000000000 | paddr; +} +#elif defined(CONFIG_CPU_XLR) + +static inline uint64_t +nlm_mmio_base(uint32_t devoffset) +{ + return nlm_io_base + devoffset; +} +#endif + +#endif diff --git a/arch/mips/include/asm/netlogic/xlp-hal/bridge.h b/arch/mips/include/asm/netlogic/xlp-hal/bridge.h new file mode 100644 index 00000000000..ca95133f1ad --- /dev/null +++ b/arch/mips/include/asm/netlogic/xlp-hal/bridge.h @@ -0,0 +1,187 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef __NLM_HAL_BRIDGE_H__ +#define __NLM_HAL_BRIDGE_H__ + +/** +* @file_name mio.h +* @author Netlogic Microsystems +* @brief Basic definitions of XLP memory and io subsystem +*/ + +/* + * BRIDGE specific registers + * + * These registers start after the PCIe header, which has 0x40 + * standard entries + */ +#define BRIDGE_MODE 0x00 +#define BRIDGE_PCI_CFG_BASE 0x01 +#define BRIDGE_PCI_CFG_LIMIT 0x02 +#define BRIDGE_PCIE_CFG_BASE 0x03 +#define BRIDGE_PCIE_CFG_LIMIT 0x04 +#define BRIDGE_BUSNUM_BAR0 0x05 +#define BRIDGE_BUSNUM_BAR1 0x06 +#define BRIDGE_BUSNUM_BAR2 0x07 +#define BRIDGE_BUSNUM_BAR3 0x08 +#define BRIDGE_BUSNUM_BAR4 0x09 +#define BRIDGE_BUSNUM_BAR5 0x0a +#define BRIDGE_BUSNUM_BAR6 0x0b +#define BRIDGE_FLASH_BAR0 0x0c +#define BRIDGE_FLASH_BAR1 0x0d +#define BRIDGE_FLASH_BAR2 0x0e +#define BRIDGE_FLASH_BAR3 0x0f +#define BRIDGE_FLASH_LIMIT0 0x10 +#define BRIDGE_FLASH_LIMIT1 0x11 +#define BRIDGE_FLASH_LIMIT2 0x12 +#define BRIDGE_FLASH_LIMIT3 0x13 + +#define BRIDGE_DRAM_BAR(i) (0x14 + (i)) +#define BRIDGE_DRAM_BAR0 0x14 +#define BRIDGE_DRAM_BAR1 0x15 +#define BRIDGE_DRAM_BAR2 0x16 +#define BRIDGE_DRAM_BAR3 0x17 +#define BRIDGE_DRAM_BAR4 0x18 +#define BRIDGE_DRAM_BAR5 0x19 +#define BRIDGE_DRAM_BAR6 0x1a +#define BRIDGE_DRAM_BAR7 0x1b + +#define BRIDGE_DRAM_LIMIT(i) (0x1c + (i)) +#define BRIDGE_DRAM_LIMIT0 0x1c +#define BRIDGE_DRAM_LIMIT1 0x1d +#define BRIDGE_DRAM_LIMIT2 0x1e +#define BRIDGE_DRAM_LIMIT3 0x1f +#define BRIDGE_DRAM_LIMIT4 0x20 +#define BRIDGE_DRAM_LIMIT5 0x21 +#define BRIDGE_DRAM_LIMIT6 0x22 +#define BRIDGE_DRAM_LIMIT7 0x23 + +#define BRIDGE_DRAM_NODE_TRANSLN0 0x24 +#define BRIDGE_DRAM_NODE_TRANSLN1 0x25 +#define BRIDGE_DRAM_NODE_TRANSLN2 0x26 +#define BRIDGE_DRAM_NODE_TRANSLN3 0x27 +#define BRIDGE_DRAM_NODE_TRANSLN4 0x28 +#define BRIDGE_DRAM_NODE_TRANSLN5 0x29 +#define BRIDGE_DRAM_NODE_TRANSLN6 0x2a +#define BRIDGE_DRAM_NODE_TRANSLN7 0x2b +#define BRIDGE_DRAM_CHNL_TRANSLN0 0x2c +#define BRIDGE_DRAM_CHNL_TRANSLN1 0x2d +#define BRIDGE_DRAM_CHNL_TRANSLN2 0x2e +#define BRIDGE_DRAM_CHNL_TRANSLN3 0x2f +#define BRIDGE_DRAM_CHNL_TRANSLN4 0x30 +#define BRIDGE_DRAM_CHNL_TRANSLN5 0x31 +#define BRIDGE_DRAM_CHNL_TRANSLN6 0x32 +#define BRIDGE_DRAM_CHNL_TRANSLN7 0x33 +#define BRIDGE_PCIEMEM_BASE0 0x34 +#define BRIDGE_PCIEMEM_BASE1 0x35 +#define BRIDGE_PCIEMEM_BASE2 0x36 +#define BRIDGE_PCIEMEM_BASE3 0x37 +#define BRIDGE_PCIEMEM_LIMIT0 0x38 +#define BRIDGE_PCIEMEM_LIMIT1 0x39 +#define BRIDGE_PCIEMEM_LIMIT2 0x3a +#define BRIDGE_PCIEMEM_LIMIT3 0x3b +#define BRIDGE_PCIEIO_BASE0 0x3c +#define BRIDGE_PCIEIO_BASE1 0x3d +#define BRIDGE_PCIEIO_BASE2 0x3e +#define BRIDGE_PCIEIO_BASE3 0x3f +#define BRIDGE_PCIEIO_LIMIT0 0x40 +#define BRIDGE_PCIEIO_LIMIT1 0x41 +#define BRIDGE_PCIEIO_LIMIT2 0x42 +#define BRIDGE_PCIEIO_LIMIT3 0x43 +#define BRIDGE_PCIEMEM_BASE4 0x44 +#define BRIDGE_PCIEMEM_BASE5 0x45 +#define BRIDGE_PCIEMEM_BASE6 0x46 +#define BRIDGE_PCIEMEM_LIMIT4 0x47 +#define BRIDGE_PCIEMEM_LIMIT5 0x48 +#define BRIDGE_PCIEMEM_LIMIT6 0x49 +#define BRIDGE_PCIEIO_BASE4 0x4a +#define BRIDGE_PCIEIO_BASE5 0x4b +#define BRIDGE_PCIEIO_BASE6 0x4c +#define BRIDGE_PCIEIO_LIMIT4 0x4d +#define BRIDGE_PCIEIO_LIMIT5 0x4e +#define BRIDGE_PCIEIO_LIMIT6 0x4f +#define BRIDGE_NBU_EVENT_CNT_CTL 0x50 +#define BRIDGE_EVNTCTR1_LOW 0x51 +#define BRIDGE_EVNTCTR1_HI 0x52 +#define BRIDGE_EVNT_CNT_CTL2 0x53 +#define BRIDGE_EVNTCTR2_LOW 0x54 +#define BRIDGE_EVNTCTR2_HI 0x55 +#define BRIDGE_TRACEBUF_MATCH0 0x56 +#define BRIDGE_TRACEBUF_MATCH1 0x57 +#define BRIDGE_TRACEBUF_MATCH_LOW 0x58 +#define BRIDGE_TRACEBUF_MATCH_HI 0x59 +#define BRIDGE_TRACEBUF_CTRL 0x5a +#define BRIDGE_TRACEBUF_INIT 0x5b +#define BRIDGE_TRACEBUF_ACCESS 0x5c +#define BRIDGE_TRACEBUF_READ_DATA0 0x5d +#define BRIDGE_TRACEBUF_READ_DATA1 0x5d +#define BRIDGE_TRACEBUF_READ_DATA2 0x5f +#define BRIDGE_TRACEBUF_READ_DATA3 0x60 +#define BRIDGE_TRACEBUF_STATUS 0x61 +#define BRIDGE_ADDRESS_ERROR0 0x62 +#define BRIDGE_ADDRESS_ERROR1 0x63 +#define BRIDGE_ADDRESS_ERROR2 0x64 +#define BRIDGE_TAG_ECC_ADDR_ERROR0 0x65 +#define BRIDGE_TAG_ECC_ADDR_ERROR1 0x66 +#define BRIDGE_TAG_ECC_ADDR_ERROR2 0x67 +#define BRIDGE_LINE_FLUSH0 0x68 +#define BRIDGE_LINE_FLUSH1 0x69 +#define BRIDGE_NODE_ID 0x6a +#define BRIDGE_ERROR_INTERRUPT_EN 0x6b +#define BRIDGE_PCIE0_WEIGHT 0x2c0 +#define BRIDGE_PCIE1_WEIGHT 0x2c1 +#define BRIDGE_PCIE2_WEIGHT 0x2c2 +#define BRIDGE_PCIE3_WEIGHT 0x2c3 +#define BRIDGE_USB_WEIGHT 0x2c4 +#define BRIDGE_NET_WEIGHT 0x2c5 +#define BRIDGE_POE_WEIGHT 0x2c6 +#define BRIDGE_CMS_WEIGHT 0x2c7 +#define BRIDGE_DMAENG_WEIGHT 0x2c8 +#define BRIDGE_SEC_WEIGHT 0x2c9 +#define BRIDGE_COMP_WEIGHT 0x2ca +#define BRIDGE_GIO_WEIGHT 0x2cb +#define BRIDGE_FLASH_WEIGHT 0x2cc + +#ifndef __ASSEMBLY__ + +#define nlm_read_bridge_reg(b, r) nlm_read_reg(b, r) +#define nlm_write_bridge_reg(b, r, v) nlm_write_reg(b, r, v) +#define nlm_get_bridge_pcibase(node) \ + nlm_pcicfg_base(XLP_IO_BRIDGE_OFFSET(node)) +#define nlm_get_bridge_regbase(node) \ + (nlm_get_bridge_pcibase(node) + XLP_IO_PCI_HDRSZ) + +#endif /* __ASSEMBLY__ */ +#endif /* __NLM_HAL_BRIDGE_H__ */ diff --git a/arch/mips/include/asm/netlogic/xlp-hal/cpucontrol.h b/arch/mips/include/asm/netlogic/xlp-hal/cpucontrol.h new file mode 100644 index 00000000000..bf7d41deb9b --- /dev/null +++ b/arch/mips/include/asm/netlogic/xlp-hal/cpucontrol.h @@ -0,0 +1,83 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef __NLM_HAL_CPUCONTROL_H__ +#define __NLM_HAL_CPUCONTROL_H__ + +#define CPU_BLOCKID_IFU 0 +#define CPU_BLOCKID_ICU 1 +#define CPU_BLOCKID_IEU 2 +#define CPU_BLOCKID_LSU 3 +#define CPU_BLOCKID_MMU 4 +#define CPU_BLOCKID_PRF 5 +#define CPU_BLOCKID_SCH 7 +#define CPU_BLOCKID_SCU 8 +#define CPU_BLOCKID_FPU 9 +#define CPU_BLOCKID_MAP 10 + +#define LSU_DEFEATURE 0x304 +#define LSU_CERRLOG_REGID 0x09 +#define SCHED_DEFEATURE 0x700 + +/* Offsets of interest from the 'MAP' Block */ +#define MAP_THREADMODE 0x00 +#define MAP_EXT_EBASE_ENABLE 0x04 +#define MAP_CCDI_CONFIG 0x08 +#define MAP_THRD0_CCDI_STATUS 0x0c +#define MAP_THRD1_CCDI_STATUS 0x10 +#define MAP_THRD2_CCDI_STATUS 0x14 +#define MAP_THRD3_CCDI_STATUS 0x18 +#define MAP_THRD0_DEBUG_MODE 0x1c +#define MAP_THRD1_DEBUG_MODE 0x20 +#define MAP_THRD2_DEBUG_MODE 0x24 +#define MAP_THRD3_DEBUG_MODE 0x28 +#define MAP_MISC_STATE 0x60 +#define MAP_DEBUG_READ_CTL 0x64 +#define MAP_DEBUG_READ_REG0 0x68 +#define MAP_DEBUG_READ_REG1 0x6c + +#define MMU_SETUP 0x400 +#define MMU_LFSRSEED 0x401 +#define MMU_HPW_NUM_PAGE_LVL 0x410 +#define MMU_PGWKR_PGDBASE 0x411 +#define MMU_PGWKR_PGDSHFT 0x412 +#define MMU_PGWKR_PGDMASK 0x413 +#define MMU_PGWKR_PUDSHFT 0x414 +#define MMU_PGWKR_PUDMASK 0x415 +#define MMU_PGWKR_PMDSHFT 0x416 +#define MMU_PGWKR_PMDMASK 0x417 +#define MMU_PGWKR_PTESHFT 0x418 +#define MMU_PGWKR_PTEMASK 0x419 + +#endif /* __NLM_CPUCONTROL_H__ */ diff --git a/arch/mips/include/asm/netlogic/xlp-hal/iomap.h b/arch/mips/include/asm/netlogic/xlp-hal/iomap.h new file mode 100644 index 00000000000..86cc3391e50 --- /dev/null +++ b/arch/mips/include/asm/netlogic/xlp-hal/iomap.h @@ -0,0 +1,153 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef __NLM_HAL_IOMAP_H__ +#define __NLM_HAL_IOMAP_H__ + +#define XLP_DEFAULT_IO_BASE 0x18000000 +#define NMI_BASE 0xbfc00000 +#define XLP_IO_CLK 133333333 + +#define XLP_PCIE_CFG_SIZE 0x1000 /* 4K */ +#define XLP_PCIE_DEV_BLK_SIZE (8 * XLP_PCIE_CFG_SIZE) +#define XLP_PCIE_BUS_BLK_SIZE (256 * XLP_PCIE_DEV_BLK_SIZE) +#define XLP_IO_SIZE (64 << 20) /* ECFG space size */ +#define XLP_IO_PCI_HDRSZ 0x100 +#define XLP_IO_DEV(node, dev) ((dev) + (node) * 8) +#define XLP_HDR_OFFSET(node, bus, dev, fn) (((bus) << 20) | \ + ((XLP_IO_DEV(node, dev)) << 15) | ((fn) << 12)) + +#define XLP_IO_BRIDGE_OFFSET(node) XLP_HDR_OFFSET(node, 0, 0, 0) +/* coherent inter chip */ +#define XLP_IO_CIC0_OFFSET(node) XLP_HDR_OFFSET(node, 0, 0, 1) +#define XLP_IO_CIC1_OFFSET(node) XLP_HDR_OFFSET(node, 0, 0, 2) +#define XLP_IO_CIC2_OFFSET(node) XLP_HDR_OFFSET(node, 0, 0, 3) +#define XLP_IO_PIC_OFFSET(node) XLP_HDR_OFFSET(node, 0, 0, 4) + +#define XLP_IO_PCIE_OFFSET(node, i) XLP_HDR_OFFSET(node, 0, 1, i) +#define XLP_IO_PCIE0_OFFSET(node) XLP_HDR_OFFSET(node, 0, 1, 0) +#define XLP_IO_PCIE1_OFFSET(node) XLP_HDR_OFFSET(node, 0, 1, 1) +#define XLP_IO_PCIE2_OFFSET(node) XLP_HDR_OFFSET(node, 0, 1, 2) +#define XLP_IO_PCIE3_OFFSET(node) XLP_HDR_OFFSET(node, 0, 1, 3) + +#define XLP_IO_USB_OFFSET(node, i) XLP_HDR_OFFSET(node, 0, 2, i) +#define XLP_IO_USB_EHCI0_OFFSET(node) XLP_HDR_OFFSET(node, 0, 2, 0) +#define XLP_IO_USB_OHCI0_OFFSET(node) XLP_HDR_OFFSET(node, 0, 2, 1) +#define XLP_IO_USB_OHCI1_OFFSET(node) XLP_HDR_OFFSET(node, 0, 2, 2) +#define XLP_IO_USB_EHCI1_OFFSET(node) XLP_HDR_OFFSET(node, 0, 2, 3) +#define XLP_IO_USB_OHCI2_OFFSET(node) XLP_HDR_OFFSET(node, 0, 2, 4) +#define XLP_IO_USB_OHCI3_OFFSET(node) XLP_HDR_OFFSET(node, 0, 2, 5) + +#define XLP_IO_NAE_OFFSET(node) XLP_HDR_OFFSET(node, 0, 3, 0) +#define XLP_IO_POE_OFFSET(node) XLP_HDR_OFFSET(node, 0, 3, 1) + +#define XLP_IO_CMS_OFFSET(node) XLP_HDR_OFFSET(node, 0, 4, 0) + +#define XLP_IO_DMA_OFFSET(node) XLP_HDR_OFFSET(node, 0, 5, 1) +#define XLP_IO_SEC_OFFSET(node) XLP_HDR_OFFSET(node, 0, 5, 2) +#define XLP_IO_CMP_OFFSET(node) XLP_HDR_OFFSET(node, 0, 5, 3) + +#define XLP_IO_UART_OFFSET(node, i) XLP_HDR_OFFSET(node, 0, 6, i) +#define XLP_IO_UART0_OFFSET(node) XLP_HDR_OFFSET(node, 0, 6, 0) +#define XLP_IO_UART1_OFFSET(node) XLP_HDR_OFFSET(node, 0, 6, 1) +#define XLP_IO_I2C_OFFSET(node, i) XLP_HDR_OFFSET(node, 0, 6, 2 + i) +#define XLP_IO_I2C0_OFFSET(node) XLP_HDR_OFFSET(node, 0, 6, 2) +#define XLP_IO_I2C1_OFFSET(node) XLP_HDR_OFFSET(node, 0, 6, 3) +#define XLP_IO_GPIO_OFFSET(node) XLP_HDR_OFFSET(node, 0, 6, 4) +/* system management */ +#define XLP_IO_SYS_OFFSET(node) XLP_HDR_OFFSET(node, 0, 6, 5) +#define XLP_IO_JTAG_OFFSET(node) XLP_HDR_OFFSET(node, 0, 6, 6) + +#define XLP_IO_NOR_OFFSET(node) XLP_HDR_OFFSET(node, 0, 7, 0) +#define XLP_IO_NAND_OFFSET(node) XLP_HDR_OFFSET(node, 0, 7, 1) +#define XLP_IO_SPI_OFFSET(node) XLP_HDR_OFFSET(node, 0, 7, 2) +/* SD flash */ +#define XLP_IO_SD_OFFSET(node) XLP_HDR_OFFSET(node, 0, 7, 3) +#define XLP_IO_MMC_OFFSET(node, slot) \ + ((XLP_IO_SD_OFFSET(node))+(slot*0x100)+XLP_IO_PCI_HDRSZ) + +/* PCI config header register id's */ +#define XLP_PCI_CFGREG0 0x00 +#define XLP_PCI_CFGREG1 0x01 +#define XLP_PCI_CFGREG2 0x02 +#define XLP_PCI_CFGREG3 0x03 +#define XLP_PCI_CFGREG4 0x04 +#define XLP_PCI_CFGREG5 0x05 +#define XLP_PCI_DEVINFO_REG0 0x30 +#define XLP_PCI_DEVINFO_REG1 0x31 +#define XLP_PCI_DEVINFO_REG2 0x32 +#define XLP_PCI_DEVINFO_REG3 0x33 +#define XLP_PCI_DEVINFO_REG4 0x34 +#define XLP_PCI_DEVINFO_REG5 0x35 +#define XLP_PCI_DEVINFO_REG6 0x36 +#define XLP_PCI_DEVINFO_REG7 0x37 +#define XLP_PCI_DEVSCRATCH_REG0 0x38 +#define XLP_PCI_DEVSCRATCH_REG1 0x39 +#define XLP_PCI_DEVSCRATCH_REG2 0x3a +#define XLP_PCI_DEVSCRATCH_REG3 0x3b +#define XLP_PCI_MSGSTN_REG 0x3c +#define XLP_PCI_IRTINFO_REG 0x3d +#define XLP_PCI_UCODEINFO_REG 0x3e +#define XLP_PCI_SBB_WT_REG 0x3f + +/* PCI IDs for SoC device */ +#define PCI_VENDOR_NETLOGIC 0x184e + +#define PCI_DEVICE_ID_NLM_ROOT 0x1001 +#define PCI_DEVICE_ID_NLM_ICI 0x1002 +#define PCI_DEVICE_ID_NLM_PIC 0x1003 +#define PCI_DEVICE_ID_NLM_PCIE 0x1004 +#define PCI_DEVICE_ID_NLM_EHCI 0x1007 +#define PCI_DEVICE_ID_NLM_ILK 0x1008 +#define PCI_DEVICE_ID_NLM_NAE 0x1009 +#define PCI_DEVICE_ID_NLM_POE 0x100A +#define PCI_DEVICE_ID_NLM_FMN 0x100B +#define PCI_DEVICE_ID_NLM_RAID 0x100D +#define PCI_DEVICE_ID_NLM_SAE 0x100D +#define PCI_DEVICE_ID_NLM_RSA 0x100E +#define PCI_DEVICE_ID_NLM_CMP 0x100F +#define PCI_DEVICE_ID_NLM_UART 0x1010 +#define PCI_DEVICE_ID_NLM_I2C 0x1011 +#define PCI_DEVICE_ID_NLM_NOR 0x1015 +#define PCI_DEVICE_ID_NLM_NAND 0x1016 +#define PCI_DEVICE_ID_NLM_MMC 0x1018 + +#ifndef __ASSEMBLY__ + +#define nlm_read_pci_reg(b, r) nlm_read_reg(b, r) +#define nlm_write_pci_reg(b, r, v) nlm_write_reg(b, r, v) + +#endif /* !__ASSEMBLY */ + +#endif /* __NLM_HAL_IOMAP_H__ */ diff --git a/arch/mips/include/asm/netlogic/xlp-hal/pic.h b/arch/mips/include/asm/netlogic/xlp-hal/pic.h new file mode 100644 index 00000000000..b6628f7ccf7 --- /dev/null +++ b/arch/mips/include/asm/netlogic/xlp-hal/pic.h @@ -0,0 +1,411 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _NLM_HAL_PIC_H +#define _NLM_HAL_PIC_H + +/* PIC Specific registers */ +#define PIC_CTRL 0x00 + +/* PIC control register defines */ +#define PIC_CTRL_ITV 32 /* interrupt timeout value */ +#define PIC_CTRL_ICI 19 /* ICI interrupt timeout enable */ +#define PIC_CTRL_ITE 18 /* interrupt timeout enable */ +#define PIC_CTRL_STE 10 /* system timer interrupt enable */ +#define PIC_CTRL_WWR1 8 /* watchdog 1 wraparound count for reset */ +#define PIC_CTRL_WWR0 6 /* watchdog 0 wraparound count for reset */ +#define PIC_CTRL_WWN1 4 /* watchdog 1 wraparound count for NMI */ +#define PIC_CTRL_WWN0 2 /* watchdog 0 wraparound count for NMI */ +#define PIC_CTRL_WTE 0 /* watchdog timer enable */ + +/* PIC Status register defines */ +#define PIC_ICI_STATUS 33 /* ICI interrupt timeout status */ +#define PIC_ITE_STATUS 32 /* interrupt timeout status */ +#define PIC_STS_STATUS 4 /* System timer interrupt status */ +#define PIC_WNS_STATUS 2 /* NMI status for watchdog timers */ +#define PIC_WIS_STATUS 0 /* Interrupt status for watchdog timers */ + +/* PIC IPI control register offsets */ +#define PIC_IPICTRL_NMI 32 +#define PIC_IPICTRL_RIV 20 /* received interrupt vector */ +#define PIC_IPICTRL_IDB 16 /* interrupt destination base */ +#define PIC_IPICTRL_DTE 0 /* interrupt destination thread enables */ + +/* PIC IRT register offsets */ +#define PIC_IRT_ENABLE 31 +#define PIC_IRT_NMI 29 +#define PIC_IRT_SCH 28 /* Scheduling scheme */ +#define PIC_IRT_RVEC 20 /* Interrupt receive vectors */ +#define PIC_IRT_DT 19 /* Destination type */ +#define PIC_IRT_DB 16 /* Destination base */ +#define PIC_IRT_DTE 0 /* Destination thread enables */ + +#define PIC_BYTESWAP 0x02 +#define PIC_STATUS 0x04 +#define PIC_INTR_TIMEOUT 0x06 +#define PIC_ICI0_INTR_TIMEOUT 0x08 +#define PIC_ICI1_INTR_TIMEOUT 0x0a +#define PIC_ICI2_INTR_TIMEOUT 0x0c +#define PIC_IPI_CTL 0x0e +#define PIC_INT_ACK 0x10 +#define PIC_INT_PENDING0 0x12 +#define PIC_INT_PENDING1 0x14 +#define PIC_INT_PENDING2 0x16 + +#define PIC_WDOG0_MAXVAL 0x18 +#define PIC_WDOG0_COUNT 0x1a +#define PIC_WDOG0_ENABLE0 0x1c +#define PIC_WDOG0_ENABLE1 0x1e +#define PIC_WDOG0_BEATCMD 0x20 +#define PIC_WDOG0_BEAT0 0x22 +#define PIC_WDOG0_BEAT1 0x24 + +#define PIC_WDOG1_MAXVAL 0x26 +#define PIC_WDOG1_COUNT 0x28 +#define PIC_WDOG1_ENABLE0 0x2a +#define PIC_WDOG1_ENABLE1 0x2c +#define PIC_WDOG1_BEATCMD 0x2e +#define PIC_WDOG1_BEAT0 0x30 +#define PIC_WDOG1_BEAT1 0x32 + +#define PIC_WDOG_MAXVAL(i) (PIC_WDOG0_MAXVAL + ((i) ? 7 : 0)) +#define PIC_WDOG_COUNT(i) (PIC_WDOG0_COUNT + ((i) ? 7 : 0)) +#define PIC_WDOG_ENABLE0(i) (PIC_WDOG0_ENABLE0 + ((i) ? 7 : 0)) +#define PIC_WDOG_ENABLE1(i) (PIC_WDOG0_ENABLE1 + ((i) ? 7 : 0)) +#define PIC_WDOG_BEATCMD(i) (PIC_WDOG0_BEATCMD + ((i) ? 7 : 0)) +#define PIC_WDOG_BEAT0(i) (PIC_WDOG0_BEAT0 + ((i) ? 7 : 0)) +#define PIC_WDOG_BEAT1(i) (PIC_WDOG0_BEAT1 + ((i) ? 7 : 0)) + +#define PIC_TIMER0_MAXVAL 0x34 +#define PIC_TIMER1_MAXVAL 0x36 +#define PIC_TIMER2_MAXVAL 0x38 +#define PIC_TIMER3_MAXVAL 0x3a +#define PIC_TIMER4_MAXVAL 0x3c +#define PIC_TIMER5_MAXVAL 0x3e +#define PIC_TIMER6_MAXVAL 0x40 +#define PIC_TIMER7_MAXVAL 0x42 +#define PIC_TIMER_MAXVAL(i) (PIC_TIMER0_MAXVAL + ((i) * 2)) + +#define PIC_TIMER0_COUNT 0x44 +#define PIC_TIMER1_COUNT 0x46 +#define PIC_TIMER2_COUNT 0x48 +#define PIC_TIMER3_COUNT 0x4a +#define PIC_TIMER4_COUNT 0x4c +#define PIC_TIMER5_COUNT 0x4e +#define PIC_TIMER6_COUNT 0x50 +#define PIC_TIMER7_COUNT 0x52 +#define PIC_TIMER_COUNT(i) (PIC_TIMER0_COUNT + ((i) * 2)) + +#define PIC_ITE0_N0_N1 0x54 +#define PIC_ITE1_N0_N1 0x58 +#define PIC_ITE2_N0_N1 0x5c +#define PIC_ITE3_N0_N1 0x60 +#define PIC_ITE4_N0_N1 0x64 +#define PIC_ITE5_N0_N1 0x68 +#define PIC_ITE6_N0_N1 0x6c +#define PIC_ITE7_N0_N1 0x70 +#define PIC_ITE_N0_N1(i) (PIC_ITE0_N0_N1 + ((i) * 4)) + +#define PIC_ITE0_N2_N3 0x56 +#define PIC_ITE1_N2_N3 0x5a +#define PIC_ITE2_N2_N3 0x5e +#define PIC_ITE3_N2_N3 0x62 +#define PIC_ITE4_N2_N3 0x66 +#define PIC_ITE5_N2_N3 0x6a +#define PIC_ITE6_N2_N3 0x6e +#define PIC_ITE7_N2_N3 0x72 +#define PIC_ITE_N2_N3(i) (PIC_ITE0_N2_N3 + ((i) * 4)) + +#define PIC_IRT0 0x74 +#define PIC_IRT(i) (PIC_IRT0 + ((i) * 2)) + +#define TIMER_CYCLES_MAXVAL 0xffffffffffffffffULL + +/* + * IRT Map + */ +#define PIC_NUM_IRTS 160 + +#define PIC_IRT_WD_0_INDEX 0 +#define PIC_IRT_WD_1_INDEX 1 +#define PIC_IRT_WD_NMI_0_INDEX 2 +#define PIC_IRT_WD_NMI_1_INDEX 3 +#define PIC_IRT_TIMER_0_INDEX 4 +#define PIC_IRT_TIMER_1_INDEX 5 +#define PIC_IRT_TIMER_2_INDEX 6 +#define PIC_IRT_TIMER_3_INDEX 7 +#define PIC_IRT_TIMER_4_INDEX 8 +#define PIC_IRT_TIMER_5_INDEX 9 +#define PIC_IRT_TIMER_6_INDEX 10 +#define PIC_IRT_TIMER_7_INDEX 11 +#define PIC_IRT_CLOCK_INDEX PIC_IRT_TIMER_7_INDEX +#define PIC_IRT_TIMER_INDEX(num) ((num) + PIC_IRT_TIMER_0_INDEX) + + +/* 11 and 12 */ +#define PIC_NUM_MSG_Q_IRTS 32 +#define PIC_IRT_MSG_Q0_INDEX 12 +#define PIC_IRT_MSG_Q_INDEX(qid) ((qid) + PIC_IRT_MSG_Q0_INDEX) +/* 12 to 43 */ +#define PIC_IRT_MSG_0_INDEX 44 +#define PIC_IRT_MSG_1_INDEX 45 +/* 44 and 45 */ +#define PIC_NUM_PCIE_MSIX_IRTS 32 +#define PIC_IRT_PCIE_MSIX_0_INDEX 46 +#define PIC_IRT_PCIE_MSIX_INDEX(num) ((num) + PIC_IRT_PCIE_MSIX_0_INDEX) +/* 46 to 77 */ +#define PIC_NUM_PCIE_LINK_IRTS 4 +#define PIC_IRT_PCIE_LINK_0_INDEX 78 +#define PIC_IRT_PCIE_LINK_1_INDEX 79 +#define PIC_IRT_PCIE_LINK_2_INDEX 80 +#define PIC_IRT_PCIE_LINK_3_INDEX 81 +#define PIC_IRT_PCIE_LINK_INDEX(num) ((num) + PIC_IRT_PCIE_LINK_0_INDEX) +/* 78 to 81 */ +#define PIC_NUM_NA_IRTS 32 +/* 82 to 113 */ +#define PIC_IRT_NA_0_INDEX 82 +#define PIC_IRT_NA_INDEX(num) ((num) + PIC_IRT_NA_0_INDEX) +#define PIC_IRT_POE_INDEX 114 + +#define PIC_NUM_USB_IRTS 6 +#define PIC_IRT_USB_0_INDEX 115 +#define PIC_IRT_EHCI_0_INDEX 115 +#define PIC_IRT_EHCI_1_INDEX 118 +#define PIC_IRT_USB_INDEX(num) ((num) + PIC_IRT_USB_0_INDEX) +/* 115 to 120 */ +#define PIC_IRT_GDX_INDEX 121 +#define PIC_IRT_SEC_INDEX 122 +#define PIC_IRT_RSA_INDEX 123 + +#define PIC_NUM_COMP_IRTS 4 +#define PIC_IRT_COMP_0_INDEX 124 +#define PIC_IRT_COMP_INDEX(num) ((num) + PIC_IRT_COMP_0_INDEX) +/* 124 to 127 */ +#define PIC_IRT_GBU_INDEX 128 +#define PIC_IRT_ICC_0_INDEX 129 /* ICC - Inter Chip Coherency */ +#define PIC_IRT_ICC_1_INDEX 130 +#define PIC_IRT_ICC_2_INDEX 131 +#define PIC_IRT_CAM_INDEX 132 +#define PIC_IRT_UART_0_INDEX 133 +#define PIC_IRT_UART_1_INDEX 134 +#define PIC_IRT_I2C_0_INDEX 135 +#define PIC_IRT_I2C_1_INDEX 136 +#define PIC_IRT_SYS_0_INDEX 137 +#define PIC_IRT_SYS_1_INDEX 138 +#define PIC_IRT_JTAG_INDEX 139 +#define PIC_IRT_PIC_INDEX 140 +#define PIC_IRT_NBU_INDEX 141 +#define PIC_IRT_TCU_INDEX 142 +#define PIC_IRT_GCU_INDEX 143 /* GBC - Global Coherency */ +#define PIC_IRT_DMC_0_INDEX 144 +#define PIC_IRT_DMC_1_INDEX 145 + +#define PIC_NUM_GPIO_IRTS 4 +#define PIC_IRT_GPIO_0_INDEX 146 +#define PIC_IRT_GPIO_INDEX(num) ((num) + PIC_IRT_GPIO_0_INDEX) + +/* 146 to 149 */ +#define PIC_IRT_NOR_INDEX 150 +#define PIC_IRT_NAND_INDEX 151 +#define PIC_IRT_SPI_INDEX 152 +#define PIC_IRT_MMC_INDEX 153 + +#define PIC_CLOCK_TIMER 7 +#define PIC_IRQ_BASE 8 + +#if !defined(LOCORE) && !defined(__ASSEMBLY__) + +#define PIC_IRT_FIRST_IRQ (PIC_IRQ_BASE) +#define PIC_IRT_LAST_IRQ 63 +#define PIC_IRQ_IS_IRT(irq) ((irq) >= PIC_IRT_FIRST_IRQ) + +/* + * Misc + */ +#define PIC_IRT_VALID 1 +#define PIC_LOCAL_SCHEDULING 1 +#define PIC_GLOBAL_SCHEDULING 0 + +#define nlm_read_pic_reg(b, r) nlm_read_reg64(b, r) +#define nlm_write_pic_reg(b, r, v) nlm_write_reg64(b, r, v) +#define nlm_get_pic_pcibase(node) nlm_pcicfg_base(XLP_IO_PIC_OFFSET(node)) +#define nlm_get_pic_regbase(node) (nlm_get_pic_pcibase(node) + XLP_IO_PCI_HDRSZ) + +/* IRT and h/w interrupt routines */ +static inline int +nlm_pic_read_irt(uint64_t base, int irt_index) +{ + return nlm_read_pic_reg(base, PIC_IRT(irt_index)); +} + +static inline uint64_t +nlm_pic_read_control(uint64_t base) +{ + return nlm_read_pic_reg(base, PIC_CTRL); +} + +static inline void +nlm_pic_write_control(uint64_t base, uint64_t control) +{ + nlm_write_pic_reg(base, PIC_CTRL, control); +} + +static inline void +nlm_pic_update_control(uint64_t base, uint64_t control) +{ + uint64_t val; + + val = nlm_read_pic_reg(base, PIC_CTRL); + nlm_write_pic_reg(base, PIC_CTRL, control | val); +} + +static inline void +nlm_set_irt_to_cpu(uint64_t base, int irt, int cpu) +{ + uint64_t val; + + val = nlm_read_pic_reg(base, PIC_IRT(irt)); + val |= cpu & 0xf; + if (cpu > 15) + val |= 1 << 16; + nlm_write_pic_reg(base, PIC_IRT(irt), val); +} + +static inline void +nlm_pic_write_irt(uint64_t base, int irt_num, int en, int nmi, + int sch, int vec, int dt, int db, int dte) +{ + uint64_t val; + + val = (((uint64_t)en & 0x1) << 31) | ((nmi & 0x1) << 29) | + ((sch & 0x1) << 28) | ((vec & 0x3f) << 20) | + ((dt & 0x1) << 19) | ((db & 0x7) << 16) | + (dte & 0xffff); + + nlm_write_pic_reg(base, PIC_IRT(irt_num), val); +} + +static inline void +nlm_pic_write_irt_direct(uint64_t base, int irt_num, int en, int nmi, + int sch, int vec, int cpu) +{ + nlm_pic_write_irt(base, irt_num, en, nmi, sch, vec, 1, + (cpu >> 4), /* thread group */ + 1 << (cpu & 0xf)); /* thread mask */ +} + +static inline uint64_t +nlm_pic_read_timer(uint64_t base, int timer) +{ + return nlm_read_pic_reg(base, PIC_TIMER_COUNT(timer)); +} + +static inline void +nlm_pic_write_timer(uint64_t base, int timer, uint64_t value) +{ + nlm_write_pic_reg(base, PIC_TIMER_COUNT(timer), value); +} + +static inline void +nlm_pic_set_timer(uint64_t base, int timer, uint64_t value, int irq, int cpu) +{ + uint64_t pic_ctrl = nlm_read_pic_reg(base, PIC_CTRL); + int en; + + en = (irq > 0); + nlm_write_pic_reg(base, PIC_TIMER_MAXVAL(timer), value); + nlm_pic_write_irt_direct(base, PIC_IRT_TIMER_INDEX(timer), + en, 0, 0, irq, cpu); + + /* enable the timer */ + pic_ctrl |= (1 << (PIC_CTRL_STE + timer)); + nlm_write_pic_reg(base, PIC_CTRL, pic_ctrl); +} + +static inline void +nlm_pic_enable_irt(uint64_t base, int irt) +{ + uint64_t reg; + + reg = nlm_read_pic_reg(base, PIC_IRT(irt)); + nlm_write_pic_reg(base, PIC_IRT(irt), reg | (1u << 31)); +} + +static inline void +nlm_pic_disable_irt(uint64_t base, int irt) +{ + uint32_t reg; + + reg = nlm_read_pic_reg(base, PIC_IRT(irt)); + nlm_write_pic_reg(base, PIC_IRT(irt), reg & ~((uint64_t)1 << 31)); +} + +static inline void +nlm_pic_send_ipi(uint64_t base, int hwt, int irq, int nmi) +{ + uint64_t ipi; + int node, ncpu; + + node = hwt / 32; + ncpu = hwt & 0x1f; + ipi = ((uint64_t)nmi << 31) | (irq << 20) | (node << 17) | + (1 << (ncpu & 0xf)); + if (ncpu > 15) + ipi |= 0x10000; /* Setting bit 16 to select cpus 16-31 */ + + nlm_write_pic_reg(base, PIC_IPI_CTL, ipi); +} + +static inline void +nlm_pic_ack(uint64_t base, int irt_num) +{ + nlm_write_pic_reg(base, PIC_INT_ACK, irt_num); + + /* Ack the Status register for Watchdog & System timers */ + if (irt_num < 12) + nlm_write_pic_reg(base, PIC_STATUS, (1 << irt_num)); +} + +static inline void +nlm_pic_init_irt(uint64_t base, int irt, int irq, int hwt) +{ + nlm_pic_write_irt_direct(base, irt, 0, 0, 0, irq, 0); +} + +extern uint64_t nlm_pic_base; +int nlm_irq_to_irt(int irq); +int nlm_irt_to_irq(int irt); + +#endif /* __ASSEMBLY__ */ +#endif /* _NLM_HAL_PIC_H */ diff --git a/arch/mips/include/asm/netlogic/xlp-hal/sys.h b/arch/mips/include/asm/netlogic/xlp-hal/sys.h new file mode 100644 index 00000000000..21432f7d89b --- /dev/null +++ b/arch/mips/include/asm/netlogic/xlp-hal/sys.h @@ -0,0 +1,129 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef __NLM_HAL_SYS_H__ +#define __NLM_HAL_SYS_H__ + +/** +* @file_name sys.h +* @author Netlogic Microsystems +* @brief HAL for System configuration registers +*/ +#define SYS_CHIP_RESET 0x00 +#define SYS_POWER_ON_RESET_CFG 0x01 +#define SYS_EFUSE_DEVICE_CFG_STATUS0 0x02 +#define SYS_EFUSE_DEVICE_CFG_STATUS1 0x03 +#define SYS_EFUSE_DEVICE_CFG_STATUS2 0x04 +#define SYS_EFUSE_DEVICE_CFG3 0x05 +#define SYS_EFUSE_DEVICE_CFG4 0x06 +#define SYS_EFUSE_DEVICE_CFG5 0x07 +#define SYS_EFUSE_DEVICE_CFG6 0x08 +#define SYS_EFUSE_DEVICE_CFG7 0x09 +#define SYS_PLL_CTRL 0x0a +#define SYS_CPU_RESET 0x0b +#define SYS_CPU_NONCOHERENT_MODE 0x0d +#define SYS_CORE_DFS_DIS_CTRL 0x0e +#define SYS_CORE_DFS_RST_CTRL 0x0f +#define SYS_CORE_DFS_BYP_CTRL 0x10 +#define SYS_CORE_DFS_PHA_CTRL 0x11 +#define SYS_CORE_DFS_DIV_INC_CTRL 0x12 +#define SYS_CORE_DFS_DIV_DEC_CTRL 0x13 +#define SYS_CORE_DFS_DIV_VALUE 0x14 +#define SYS_RESET 0x15 +#define SYS_DFS_DIS_CTRL 0x16 +#define SYS_DFS_RST_CTRL 0x17 +#define SYS_DFS_BYP_CTRL 0x18 +#define SYS_DFS_DIV_INC_CTRL 0x19 +#define SYS_DFS_DIV_DEC_CTRL 0x1a +#define SYS_DFS_DIV_VALUE0 0x1b +#define SYS_DFS_DIV_VALUE1 0x1c +#define SYS_SENSE_AMP_DLY 0x1d +#define SYS_SOC_SENSE_AMP_DLY 0x1e +#define SYS_CTRL0 0x1f +#define SYS_CTRL1 0x20 +#define SYS_TIMEOUT_BS1 0x21 +#define SYS_BYTE_SWAP 0x22 +#define SYS_VRM_VID 0x23 +#define SYS_PWR_RAM_CMD 0x24 +#define SYS_PWR_RAM_ADDR 0x25 +#define SYS_PWR_RAM_DATA0 0x26 +#define SYS_PWR_RAM_DATA1 0x27 +#define SYS_PWR_RAM_DATA2 0x28 +#define SYS_PWR_UCODE 0x29 +#define SYS_CPU0_PWR_STATUS 0x2a +#define SYS_CPU1_PWR_STATUS 0x2b +#define SYS_CPU2_PWR_STATUS 0x2c +#define SYS_CPU3_PWR_STATUS 0x2d +#define SYS_CPU4_PWR_STATUS 0x2e +#define SYS_CPU5_PWR_STATUS 0x2f +#define SYS_CPU6_PWR_STATUS 0x30 +#define SYS_CPU7_PWR_STATUS 0x31 +#define SYS_STATUS 0x32 +#define SYS_INT_POL 0x33 +#define SYS_INT_TYPE 0x34 +#define SYS_INT_STATUS 0x35 +#define SYS_INT_MASK0 0x36 +#define SYS_INT_MASK1 0x37 +#define SYS_UCO_S_ECC 0x38 +#define SYS_UCO_M_ECC 0x39 +#define SYS_UCO_ADDR 0x3a +#define SYS_UCO_INSTR 0x3b +#define SYS_MEM_BIST0 0x3c +#define SYS_MEM_BIST1 0x3d +#define SYS_MEM_BIST2 0x3e +#define SYS_MEM_BIST3 0x3f +#define SYS_MEM_BIST4 0x40 +#define SYS_MEM_BIST5 0x41 +#define SYS_MEM_BIST6 0x42 +#define SYS_MEM_BIST7 0x43 +#define SYS_MEM_BIST8 0x44 +#define SYS_MEM_BIST9 0x45 +#define SYS_MEM_BIST10 0x46 +#define SYS_MEM_BIST11 0x47 +#define SYS_MEM_BIST12 0x48 +#define SYS_SCRTCH0 0x49 +#define SYS_SCRTCH1 0x4a +#define SYS_SCRTCH2 0x4b +#define SYS_SCRTCH3 0x4c + +#ifndef __ASSEMBLY__ + +#define nlm_read_sys_reg(b, r) nlm_read_reg(b, r) +#define nlm_write_sys_reg(b, r, v) nlm_write_reg(b, r, v) +#define nlm_get_sys_pcibase(node) nlm_pcicfg_base(XLP_IO_SYS_OFFSET(node)) +#define nlm_get_sys_regbase(node) (nlm_get_sys_pcibase(node) + XLP_IO_PCI_HDRSZ) + +extern uint64_t nlm_sys_base; +#endif +#endif diff --git a/arch/mips/include/asm/netlogic/xlp-hal/uart.h b/arch/mips/include/asm/netlogic/xlp-hal/uart.h new file mode 100644 index 00000000000..6a7046ca094 --- /dev/null +++ b/arch/mips/include/asm/netlogic/xlp-hal/uart.h @@ -0,0 +1,191 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef __XLP_HAL_UART_H__ +#define __XLP_HAL_UART_H__ + +/* UART Specific registers */ +#define UART_RX_DATA 0x00 +#define UART_TX_DATA 0x00 + +#define UART_INT_EN 0x01 +#define UART_INT_ID 0x02 +#define UART_FIFO_CTL 0x02 +#define UART_LINE_CTL 0x03 +#define UART_MODEM_CTL 0x04 +#define UART_LINE_STS 0x05 +#define UART_MODEM_STS 0x06 + +#define UART_DIVISOR0 0x00 +#define UART_DIVISOR1 0x01 + +#define BASE_BAUD (XLP_IO_CLK/16) +#define BAUD_DIVISOR(baud) (BASE_BAUD / baud) + +/* LCR mask values */ +#define LCR_5BITS 0x00 +#define LCR_6BITS 0x01 +#define LCR_7BITS 0x02 +#define LCR_8BITS 0x03 +#define LCR_STOPB 0x04 +#define LCR_PENAB 0x08 +#define LCR_PODD 0x00 +#define LCR_PEVEN 0x10 +#define LCR_PONE 0x20 +#define LCR_PZERO 0x30 +#define LCR_SBREAK 0x40 +#define LCR_EFR_ENABLE 0xbf +#define LCR_DLAB 0x80 + +/* MCR mask values */ +#define MCR_DTR 0x01 +#define MCR_RTS 0x02 +#define MCR_DRS 0x04 +#define MCR_IE 0x08 +#define MCR_LOOPBACK 0x10 + +/* FCR mask values */ +#define FCR_RCV_RST 0x02 +#define FCR_XMT_RST 0x04 +#define FCR_RX_LOW 0x00 +#define FCR_RX_MEDL 0x40 +#define FCR_RX_MEDH 0x80 +#define FCR_RX_HIGH 0xc0 + +/* IER mask values */ +#define IER_ERXRDY 0x1 +#define IER_ETXRDY 0x2 +#define IER_ERLS 0x4 +#define IER_EMSC 0x8 + +#if !defined(LOCORE) && !defined(__ASSEMBLY__) + +#define nlm_read_uart_reg(b, r) nlm_read_reg(b, r) +#define nlm_write_uart_reg(b, r, v) nlm_write_reg(b, r, v) +#define nlm_get_uart_pcibase(node, inst) \ + nlm_pcicfg_base(XLP_IO_UART_OFFSET(node, inst)) +#define nlm_get_uart_regbase(node, inst) \ + (nlm_get_uart_pcibase(node, inst) + XLP_IO_PCI_HDRSZ) + +static inline void +nlm_uart_set_baudrate(uint64_t base, int baud) +{ + uint32_t lcr; + + lcr = nlm_read_uart_reg(base, UART_LINE_CTL); + + /* enable divisor register, and write baud values */ + nlm_write_uart_reg(base, UART_LINE_CTL, lcr | (1 << 7)); + nlm_write_uart_reg(base, UART_DIVISOR0, + (BAUD_DIVISOR(baud) & 0xff)); + nlm_write_uart_reg(base, UART_DIVISOR1, + ((BAUD_DIVISOR(baud) >> 8) & 0xff)); + + /* restore default lcr */ + nlm_write_uart_reg(base, UART_LINE_CTL, lcr); +} + +static inline void +nlm_uart_outbyte(uint64_t base, char c) +{ + uint32_t lsr; + + for (;;) { + lsr = nlm_read_uart_reg(base, UART_LINE_STS); + if (lsr & 0x20) + break; + } + + nlm_write_uart_reg(base, UART_TX_DATA, (int)c); +} + +static inline char +nlm_uart_inbyte(uint64_t base) +{ + int data, lsr; + + for (;;) { + lsr = nlm_read_uart_reg(base, UART_LINE_STS); + if (lsr & 0x80) { /* parity/frame/break-error - push a zero */ + data = 0; + break; + } + if (lsr & 0x01) { /* Rx data */ + data = nlm_read_uart_reg(base, UART_RX_DATA); + break; + } + } + + return (char)data; +} + +static inline int +nlm_uart_init(uint64_t base, int baud, int databits, int stopbits, + int parity, int int_en, int loopback) +{ + uint32_t lcr; + + lcr = 0; + if (databits >= 8) + lcr |= LCR_8BITS; + else if (databits == 7) + lcr |= LCR_7BITS; + else if (databits == 6) + lcr |= LCR_6BITS; + else + lcr |= LCR_5BITS; + + if (stopbits > 1) + lcr |= LCR_STOPB; + + lcr |= parity << 3; + + /* setup default lcr */ + nlm_write_uart_reg(base, UART_LINE_CTL, lcr); + + /* Reset the FIFOs */ + nlm_write_uart_reg(base, UART_LINE_CTL, FCR_RCV_RST | FCR_XMT_RST); + + nlm_uart_set_baudrate(base, baud); + + if (loopback) + nlm_write_uart_reg(base, UART_MODEM_CTL, 0x1f); + + if (int_en) + nlm_write_uart_reg(base, UART_INT_EN, IER_ERXRDY | IER_ETXRDY); + + return 0; +} +#endif /* !LOCORE && !__ASSEMBLY__ */ +#endif /* __XLP_HAL_UART_H__ */ diff --git a/arch/mips/netlogic/xlr/xlr_console.c b/arch/mips/include/asm/netlogic/xlp-hal/xlp.h index 759df069220..1540588e396 100644 --- a/arch/mips/netlogic/xlr/xlr_console.c +++ b/arch/mips/include/asm/netlogic/xlp-hal/xlp.h @@ -32,15 +32,20 @@ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -#include <linux/types.h> -#include <asm/netlogic/xlr/iomap.h> +#ifndef _NLM_HAL_XLP_H +#define _NLM_HAL_XLP_H -void prom_putchar(char c) -{ - nlm_reg_t *mmio; +#define PIC_UART_0_IRQ 17 +#define PIC_UART_1_IRQ 18 - mmio = netlogic_io_mmio(NETLOGIC_IO_UART_0_OFFSET); - while (netlogic_read_reg(mmio, 0x5) == 0) - ; - netlogic_write_reg(mmio, 0x0, c); -} +#ifndef __ASSEMBLY__ + +/* SMP support functions */ +void xlp_boot_core0_siblings(void); +void xlp_wakeup_secondary_cpus(void); + +void xlp_mmu_init(void); +void nlm_hal_init(void); + +#endif /* !__ASSEMBLY__ */ +#endif /* _ASM_NLM_XLP_H */ diff --git a/arch/mips/include/asm/netlogic/xlr/iomap.h b/arch/mips/include/asm/netlogic/xlr/iomap.h index 2e3a4dd5304..2e768f032e8 100644 --- a/arch/mips/include/asm/netlogic/xlr/iomap.h +++ b/arch/mips/include/asm/netlogic/xlr/iomap.h @@ -106,26 +106,4 @@ #define DEFAULT_HT_TYPE0_CFG_BASE 0x16000000 #define DEFAULT_HT_TYPE1_CFG_BASE 0x17000000 -#ifndef __ASSEMBLY__ -#include <linux/types.h> -#include <asm/byteorder.h> - -typedef volatile __u32 nlm_reg_t; -extern unsigned long netlogic_io_base; - -/* FIXME read once in write_reg */ -#ifdef CONFIG_CPU_LITTLE_ENDIAN -#define netlogic_read_reg(base, offset) ((base)[(offset)]) -#define netlogic_write_reg(base, offset, value) ((base)[(offset)] = (value)) -#else -#define netlogic_read_reg(base, offset) (be32_to_cpu((base)[(offset)])) -#define netlogic_write_reg(base, offset, value) \ - ((base)[(offset)] = cpu_to_be32((value))) -#endif - -#define netlogic_read_reg_le32(base, offset) (le32_to_cpu((base)[(offset)])) -#define netlogic_write_reg_le32(base, offset, value) \ - ((base)[(offset)] = cpu_to_le32((value))) -#define netlogic_io_mmio(offset) ((nlm_reg_t *)(netlogic_io_base+(offset))) -#endif /* __ASSEMBLY__ */ #endif diff --git a/arch/mips/include/asm/netlogic/xlr/msidef.h b/arch/mips/include/asm/netlogic/xlr/msidef.h new file mode 100644 index 00000000000..7e39d40be4f --- /dev/null +++ b/arch/mips/include/asm/netlogic/xlr/msidef.h @@ -0,0 +1,84 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef ASM_RMI_MSIDEF_H +#define ASM_RMI_MSIDEF_H + +/* + * Constants for Intel APIC based MSI messages. + * Adapted for the RMI XLR using identical defines + */ + +/* + * Shifts for MSI data + */ + +#define MSI_DATA_VECTOR_SHIFT 0 +#define MSI_DATA_VECTOR_MASK 0x000000ff +#define MSI_DATA_VECTOR(v) (((v) << MSI_DATA_VECTOR_SHIFT) & \ + MSI_DATA_VECTOR_MASK) + +#define MSI_DATA_DELIVERY_MODE_SHIFT 8 +#define MSI_DATA_DELIVERY_FIXED (0 << MSI_DATA_DELIVERY_MODE_SHIFT) +#define MSI_DATA_DELIVERY_LOWPRI (1 << MSI_DATA_DELIVERY_MODE_SHIFT) + +#define MSI_DATA_LEVEL_SHIFT 14 +#define MSI_DATA_LEVEL_DEASSERT (0 << MSI_DATA_LEVEL_SHIFT) +#define MSI_DATA_LEVEL_ASSERT (1 << MSI_DATA_LEVEL_SHIFT) + +#define MSI_DATA_TRIGGER_SHIFT 15 +#define MSI_DATA_TRIGGER_EDGE (0 << MSI_DATA_TRIGGER_SHIFT) +#define MSI_DATA_TRIGGER_LEVEL (1 << MSI_DATA_TRIGGER_SHIFT) + +/* + * Shift/mask fields for msi address + */ + +#define MSI_ADDR_BASE_HI 0 +#define MSI_ADDR_BASE_LO 0xfee00000 + +#define MSI_ADDR_DEST_MODE_SHIFT 2 +#define MSI_ADDR_DEST_MODE_PHYSICAL (0 << MSI_ADDR_DEST_MODE_SHIFT) +#define MSI_ADDR_DEST_MODE_LOGICAL (1 << MSI_ADDR_DEST_MODE_SHIFT) + +#define MSI_ADDR_REDIRECTION_SHIFT 3 +#define MSI_ADDR_REDIRECTION_CPU (0 << MSI_ADDR_REDIRECTION_SHIFT) +#define MSI_ADDR_REDIRECTION_LOWPRI (1 << MSI_ADDR_REDIRECTION_SHIFT) + +#define MSI_ADDR_DEST_ID_SHIFT 12 +#define MSI_ADDR_DEST_ID_MASK 0x00ffff0 +#define MSI_ADDR_DEST_ID(dest) (((dest) << MSI_ADDR_DEST_ID_SHIFT) & \ + MSI_ADDR_DEST_ID_MASK) + +#endif /* ASM_RMI_MSIDEF_H */ diff --git a/arch/mips/include/asm/netlogic/xlr/pic.h b/arch/mips/include/asm/netlogic/xlr/pic.h index 5cceb746f08..868013e62f3 100644 --- a/arch/mips/include/asm/netlogic/xlr/pic.h +++ b/arch/mips/include/asm/netlogic/xlr/pic.h @@ -193,39 +193,72 @@ /* end XLS */ #ifndef __ASSEMBLY__ -static inline void pic_send_ipi(u32 ipi) + +#define PIC_IRQ_IS_EDGE_TRIGGERED(irq) (((irq) >= PIC_TIMER_0_IRQ) && \ + ((irq) <= PIC_TIMER_7_IRQ)) +#define PIC_IRQ_IS_IRT(irq) (((irq) >= PIC_IRT_FIRST_IRQ) && \ + ((irq) <= PIC_IRT_LAST_IRQ)) + +static inline int +nlm_irq_to_irt(int irq) { - nlm_reg_t *mmio = netlogic_io_mmio(NETLOGIC_IO_PIC_OFFSET); + if (PIC_IRQ_IS_IRT(irq) == 0) + return -1; - netlogic_write_reg(mmio, PIC_IPI, ipi); + return PIC_IRQ_TO_INTR(irq); } -static inline u32 pic_read_control(void) +static inline int +nlm_irt_to_irq(int irt) { - nlm_reg_t *mmio = netlogic_io_mmio(NETLOGIC_IO_PIC_OFFSET); - return netlogic_read_reg(mmio, PIC_CTRL); + return PIC_INTR_TO_IRQ(irt); } -static inline void pic_write_control(u32 control) +static inline void +nlm_pic_enable_irt(uint64_t base, int irt) { - nlm_reg_t *mmio = netlogic_io_mmio(NETLOGIC_IO_PIC_OFFSET); + uint32_t reg; - netlogic_write_reg(mmio, PIC_CTRL, control); + reg = nlm_read_reg(base, PIC_IRT_1(irt)); + nlm_write_reg(base, PIC_IRT_1(irt), reg | (1u << 31)); } -static inline void pic_update_control(u32 control) +static inline void +nlm_pic_disable_irt(uint64_t base, int irt) { - nlm_reg_t *mmio = netlogic_io_mmio(NETLOGIC_IO_PIC_OFFSET); + uint32_t reg; - netlogic_write_reg(mmio, PIC_CTRL, - (control | netlogic_read_reg(mmio, PIC_CTRL))); + reg = nlm_read_reg(base, PIC_IRT_1(irt)); + nlm_write_reg(base, PIC_IRT_1(irt), reg & ~(1u << 31)); } -#define PIC_IRQ_IS_EDGE_TRIGGERED(irq) (((irq) >= PIC_TIMER_0_IRQ) && \ - ((irq) <= PIC_TIMER_7_IRQ)) -#define PIC_IRQ_IS_IRT(irq) (((irq) >= PIC_IRT_FIRST_IRQ) && \ - ((irq) <= PIC_IRT_LAST_IRQ)) -#endif +static inline void +nlm_pic_send_ipi(uint64_t base, int hwt, int irq, int nmi) +{ + unsigned int tid, pid; + + tid = hwt & 0x3; + pid = (hwt >> 2) & 0x07; + nlm_write_reg(base, PIC_IPI, + (pid << 20) | (tid << 16) | (nmi << 8) | irq); +} + +static inline void +nlm_pic_ack(uint64_t base, int irt) +{ + nlm_write_reg(base, PIC_INT_ACK, 1u << irt); +} +static inline void +nlm_pic_init_irt(uint64_t base, int irt, int irq, int hwt) +{ + nlm_write_reg(base, PIC_IRT_0(irt), (1u << hwt)); + /* local scheduling, invalid, level by default */ + nlm_write_reg(base, PIC_IRT_1(irt), + (1 << 30) | (1 << 6) | irq); +} + +extern uint64_t nlm_pic_base; +#endif #endif /* _ASM_NLM_XLR_PIC_H */ diff --git a/arch/mips/include/asm/netlogic/xlr/xlr.h b/arch/mips/include/asm/netlogic/xlr/xlr.h index 3e6372692a0..ff4a17b0bf7 100644 --- a/arch/mips/include/asm/netlogic/xlr/xlr.h +++ b/arch/mips/include/asm/netlogic/xlr/xlr.h @@ -40,17 +40,8 @@ struct uart_port; unsigned int nlm_xlr_uart_in(struct uart_port *, int); void nlm_xlr_uart_out(struct uart_port *, int, int); -/* SMP support functions */ -struct irq_desc; -void nlm_smp_function_ipi_handler(unsigned int irq, struct irq_desc *desc); -void nlm_smp_resched_ipi_handler(unsigned int irq, struct irq_desc *desc); -int nlm_wakeup_secondary_cpus(u32 wakeup_mask); -void nlm_smp_irq_init(void); -void nlm_boot_smp_nmi(void); -void prom_pre_boot_secondary_cpus(void); - -extern struct plat_smp_ops nlm_smp_ops; -extern unsigned long nlm_common_ebase; +/* SMP helpers */ +void xlr_wakeup_secondary_cpus(void); /* XLS B silicon "Rook" */ static inline unsigned int nlm_chip_is_xls_b(void) diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h index e59cd1ac09c..d41790928c6 100644 --- a/arch/mips/include/asm/page.h +++ b/arch/mips/include/asm/page.h @@ -38,6 +38,14 @@ #define HPAGE_SIZE (_AC(1,UL) << HPAGE_SHIFT) #define HPAGE_MASK (~(HPAGE_SIZE - 1)) #define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT) +#else /* !CONFIG_HUGETLB_PAGE */ +# ifndef BUILD_BUG +# define BUILD_BUG() do { extern void __build_bug(void); __build_bug(); } while (0) +# endif +#define HPAGE_SHIFT ({BUILD_BUG(); 0; }) +#define HPAGE_SIZE ({BUILD_BUG(); 0; }) +#define HPAGE_MASK ({BUILD_BUG(); 0; }) +#define HUGETLB_PAGE_ORDER ({BUILD_BUG(); 0; }) #endif /* CONFIG_HUGETLB_PAGE */ #ifndef __ASSEMBLY__ diff --git a/arch/mips/include/asm/pgtable-32.h b/arch/mips/include/asm/pgtable-32.h index 8a153d2fa62..5d56bb23034 100644 --- a/arch/mips/include/asm/pgtable-32.h +++ b/arch/mips/include/asm/pgtable-32.h @@ -19,23 +19,7 @@ #include <asm-generic/pgtable-nopmd.h> /* - * - add_wired_entry() add a fixed TLB entry, and move wired register - */ -extern void add_wired_entry(unsigned long entrylo0, unsigned long entrylo1, - unsigned long entryhi, unsigned long pagemask); - -/* - * - add_temporary_entry() add a temporary TLB entry. We use TLB entries - * starting at the top and working down. This is for populating the - * TLB before trap_init() puts the TLB miss handler in place. It - * should be used only for entries matching the actual page tables, - * to prevent inconsistencies. - */ -extern int add_temporary_entry(unsigned long entrylo0, unsigned long entrylo1, - unsigned long entryhi, unsigned long pagemask); - - -/* Basically we have the same two-level (which is the logical three level + * Basically we have the same two-level (which is the logical three level * Linux page table layout folded) page tables as the i386. Some day * when we have proper page coloring support we can have a 1% quicker * tlb refill handling mechanism, but for now it is a bit slower but diff --git a/arch/mips/include/asm/tlbmisc.h b/arch/mips/include/asm/tlbmisc.h new file mode 100644 index 00000000000..3a452282cba --- /dev/null +++ b/arch/mips/include/asm/tlbmisc.h @@ -0,0 +1,10 @@ +#ifndef __ASM_TLBMISC_H +#define __ASM_TLBMISC_H + +/* + * - add_wired_entry() add a fixed TLB entry, and move wired register + */ +extern void add_wired_entry(unsigned long entrylo0, unsigned long entrylo1, + unsigned long entryhi, unsigned long pagemask); + +#endif /* __ASM_TLBMISC_H */ diff --git a/arch/mips/include/asm/traps.h b/arch/mips/include/asm/traps.h index 90ff2f497c5..ff74aec3561 100644 --- a/arch/mips/include/asm/traps.h +++ b/arch/mips/include/asm/traps.h @@ -24,5 +24,18 @@ extern int (*board_be_handler)(struct pt_regs *regs, int is_fixup); extern void (*board_nmi_handler_setup)(void); extern void (*board_ejtag_handler_setup)(void); extern void (*board_bind_eic_interrupt)(int irq, int regset); +extern void (*board_ebase_setup)(void); + +extern int register_nmi_notifier(struct notifier_block *nb); + +#define nmi_notifier(fn, pri) \ +({ \ + static struct notifier_block fn##_nb = { \ + .notifier_call = fn, \ + .priority = pri \ + }; \ + \ + register_nmi_notifier(&fn##_nb); \ +}) #endif /* _ASM_TRAPS_H */ diff --git a/arch/mips/jazz/irq.c b/arch/mips/jazz/irq.c index ca9bd206914..f21868b28b2 100644 --- a/arch/mips/jazz/irq.c +++ b/arch/mips/jazz/irq.c @@ -20,6 +20,7 @@ #include <asm/io.h> #include <asm/jazz.h> #include <asm/pgtable.h> +#include <asm/tlbmisc.h> static DEFINE_RAW_SPINLOCK(r4030_lock); @@ -133,7 +134,7 @@ static irqreturn_t r4030_timer_interrupt(int irq, void *dev_id) static struct irqaction r4030_timer_irqaction = { .handler = r4030_timer_interrupt, - .flags = IRQF_DISABLED | IRQF_TIMER, + .flags = IRQF_TIMER, .name = "R4030 timer", }; diff --git a/arch/mips/jazz/setup.c b/arch/mips/jazz/setup.c index 0d0f054a02f..820e926dacb 100644 --- a/arch/mips/jazz/setup.c +++ b/arch/mips/jazz/setup.c @@ -21,6 +21,7 @@ #include <asm/jazzdma.h> #include <asm/reboot.h> #include <asm/pgtable.h> +#include <asm/tlbmisc.h> extern asmlinkage void jazz_handle_int(void); diff --git a/arch/mips/jz4740/board-qi_lb60.c b/arch/mips/jz4740/board-qi_lb60.c index c3b04be3fb2..639e3ce6c26 100644 --- a/arch/mips/jz4740/board-qi_lb60.c +++ b/arch/mips/jz4740/board-qi_lb60.c @@ -488,7 +488,7 @@ static int __init qi_lb60_board_setup(void) board_gpio_setup(); if (qi_lb60_init_platform_devices()) - panic("Failed to initialize platform devices\n"); + panic("Failed to initialize platform devices"); return 0; } diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index 1a966183e35..0c6877ea900 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -55,9 +55,11 @@ obj-$(CONFIG_CPU_TX49XX) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_VR41XX) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_CAVIUM_OCTEON) += octeon_switch.o obj-$(CONFIG_CPU_XLR) += r4k_fpu.o r4k_switch.o +obj-$(CONFIG_CPU_XLP) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_SMP_UP) += smp-up.o +obj-$(CONFIG_CPU_BMIPS) += smp-bmips.o bmips_vec.o obj-$(CONFIG_MIPS_MT) += mips-mt.o obj-$(CONFIG_MIPS_MT_FPAFF) += mips-mt-fpaff.o diff --git a/arch/mips/kernel/bmips_vec.S b/arch/mips/kernel/bmips_vec.S new file mode 100644 index 00000000000..e908e81330b --- /dev/null +++ b/arch/mips/kernel/bmips_vec.S @@ -0,0 +1,255 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2011 by Kevin Cernekee (cernekee@gmail.com) + * + * Reset/NMI/re-entry vectors for BMIPS processors + */ + +#include <linux/init.h> + +#include <asm/asm.h> +#include <asm/asmmacro.h> +#include <asm/cacheops.h> +#include <asm/regdef.h> +#include <asm/mipsregs.h> +#include <asm/stackframe.h> +#include <asm/addrspace.h> +#include <asm/hazards.h> +#include <asm/bmips.h> + + .macro BARRIER + .set mips32 + _ssnop + _ssnop + _ssnop + .set mips0 + .endm + + __CPUINIT + +/*********************************************************************** + * Alternate CPU1 startup vector for BMIPS4350 + * + * On some systems the bootloader has already started CPU1 and configured + * it to resume execution at 0x8000_0200 (!BEV IV vector) when it is + * triggered by the SW1 interrupt. If that is the case we try to move + * it to a more convenient place: BMIPS_WARM_RESTART_VEC @ 0x8000_0380. + ***********************************************************************/ + +LEAF(bmips_smp_movevec) + la k0, 1f + li k1, CKSEG1 + or k0, k1 + jr k0 + +1: + /* clear IV, pending IPIs */ + mtc0 zero, CP0_CAUSE + + /* re-enable IRQs to wait for SW1 */ + li k0, ST0_IE | ST0_BEV | STATUSF_IP1 + mtc0 k0, CP0_STATUS + + /* set up CPU1 CBR; move BASE to 0xa000_0000 */ + li k0, 0xff400000 + mtc0 k0, $22, 6 + li k1, CKSEG1 | BMIPS_RELO_VECTOR_CONTROL_1 + or k0, k1 + li k1, 0xa0080000 + sw k1, 0(k0) + + /* wait here for SW1 interrupt from bmips_boot_secondary() */ + wait + + la k0, bmips_reset_nmi_vec + li k1, CKSEG1 + or k0, k1 + jr k0 +END(bmips_smp_movevec) + +/*********************************************************************** + * Reset/NMI vector + * For BMIPS processors that can relocate their exception vectors, this + * entire function gets copied to 0x8000_0000. + ***********************************************************************/ + +NESTED(bmips_reset_nmi_vec, PT_SIZE, sp) + .set push + .set noat + .align 4 + +#ifdef CONFIG_SMP + /* if the NMI bit is clear, assume this is a CPU1 reset instead */ + li k1, (1 << 19) + mfc0 k0, CP0_STATUS + and k0, k1 + beqz k0, bmips_smp_entry + +#if defined(CONFIG_CPU_BMIPS5000) + /* if we're not on core 0, this must be the SMP boot signal */ + li k1, (3 << 25) + mfc0 k0, $22 + and k0, k1 + bnez k0, bmips_smp_entry +#endif +#endif /* CONFIG_SMP */ + + /* nope, it's just a regular NMI */ + SAVE_ALL + move a0, sp + + /* clear EXL, ERL, BEV so that TLB refills still work */ + mfc0 k0, CP0_STATUS + li k1, ST0_ERL | ST0_EXL | ST0_BEV | ST0_IE + or k0, k1 + xor k0, k1 + mtc0 k0, CP0_STATUS + BARRIER + + /* jump to the NMI handler function */ + la k0, nmi_handler + jr k0 + + RESTORE_ALL + .set mips3 + eret + +/*********************************************************************** + * CPU1 reset vector (used for the initial boot only) + * This is still part of bmips_reset_nmi_vec(). + ***********************************************************************/ + +#ifdef CONFIG_SMP + +bmips_smp_entry: + + /* set up CP0 STATUS; enable FPU */ + li k0, 0x30000000 + mtc0 k0, CP0_STATUS + BARRIER + + /* set local CP0 CONFIG to make kseg0 cacheable, write-back */ + mfc0 k0, CP0_CONFIG + ori k0, 0x07 + xori k0, 0x04 + mtc0 k0, CP0_CONFIG + +#if defined(CONFIG_CPU_BMIPS4350) || defined(CONFIG_CPU_BMIPS4380) + /* initialize CPU1's local I-cache */ + li k0, 0x80000000 + li k1, 0x80010000 + mtc0 zero, $28 + mtc0 zero, $28, 1 + BARRIER + +1: cache Index_Store_Tag_I, 0(k0) + addiu k0, 16 + bne k0, k1, 1b +#elif defined(CONFIG_CPU_BMIPS5000) + /* set exception vector base */ + la k0, ebase + lw k0, 0(k0) + mtc0 k0, $15, 1 + BARRIER +#endif + + /* jump back to kseg0 in case we need to remap the kseg1 area */ + la k0, 1f + jr k0 +1: + la k0, bmips_enable_xks01 + jalr k0 + + /* use temporary stack to set up upper memory TLB */ + li sp, BMIPS_WARM_RESTART_VEC + la k0, plat_wired_tlb_setup + jalr k0 + + /* switch to permanent stack and continue booting */ + + .global bmips_secondary_reentry +bmips_secondary_reentry: + la k0, bmips_smp_boot_sp + lw sp, 0(k0) + la k0, bmips_smp_boot_gp + lw gp, 0(k0) + la k0, start_secondary + jr k0 + +#endif /* CONFIG_SMP */ + + .align 4 + .global bmips_reset_nmi_vec_end +bmips_reset_nmi_vec_end: + +END(bmips_reset_nmi_vec) + + .set pop + .previous + +/*********************************************************************** + * CPU1 warm restart vector (used for second and subsequent boots). + * Also used for S2 standby recovery (PM). + * This entire function gets copied to (BMIPS_WARM_RESTART_VEC) + ***********************************************************************/ + +LEAF(bmips_smp_int_vec) + + .align 4 + mfc0 k0, CP0_STATUS + ori k0, 0x01 + xori k0, 0x01 + mtc0 k0, CP0_STATUS + eret + + .align 4 + .global bmips_smp_int_vec_end +bmips_smp_int_vec_end: + +END(bmips_smp_int_vec) + +/*********************************************************************** + * XKS01 support + * Certain CPUs support extending kseg0 to 1024MB. + ***********************************************************************/ + + __CPUINIT + +LEAF(bmips_enable_xks01) + +#if defined(CONFIG_XKS01) + +#if defined(CONFIG_CPU_BMIPS4380) + mfc0 t0, $22, 3 + li t1, 0x1ff0 + li t2, (1 << 12) | (1 << 9) + or t0, t1 + xor t0, t1 + or t0, t2 + mtc0 t0, $22, 3 + BARRIER +#elif defined(CONFIG_CPU_BMIPS5000) + mfc0 t0, $22, 5 + li t1, 0x01ff + li t2, (1 << 8) | (1 << 5) + or t0, t1 + xor t0, t1 + or t0, t2 + mtc0 t0, $22, 5 + BARRIER +#else + +#error Missing XKS01 setup + +#endif + +#endif /* defined(CONFIG_XKS01) */ + + jr ra + +END(bmips_enable_xks01) + + .previous diff --git a/arch/mips/kernel/branch.c b/arch/mips/kernel/branch.c index 32103cc2a25..4d735d0e58f 100644 --- a/arch/mips/kernel/branch.c +++ b/arch/mips/kernel/branch.c @@ -9,6 +9,7 @@ #include <linux/kernel.h> #include <linux/sched.h> #include <linux/signal.h> +#include <linux/module.h> #include <asm/branch.h> #include <asm/cpu.h> #include <asm/cpu-features.h> @@ -17,28 +18,22 @@ #include <asm/ptrace.h> #include <asm/uaccess.h> -/* - * Compute the return address and do emulate branch simulation, if required. +/** + * __compute_return_epc_for_insn - Computes the return address and do emulate + * branch simulation, if required. + * + * @regs: Pointer to pt_regs + * @insn: branch instruction to decode + * @returns: -EFAULT on error and forces SIGBUS, and on success + * returns 0 or BRANCH_LIKELY_TAKEN as appropriate after + * evaluating the branch. */ -int __compute_return_epc(struct pt_regs *regs) +int __compute_return_epc_for_insn(struct pt_regs *regs, + union mips_instruction insn) { - unsigned int __user *addr; unsigned int bit, fcr31, dspcontrol; - long epc; - union mips_instruction insn; - - epc = regs->cp0_epc; - if (epc & 3) - goto unaligned; - - /* - * Read the instruction - */ - addr = (unsigned int __user *) epc; - if (__get_user(insn.word, addr)) { - force_sig(SIGSEGV, current); - return -EFAULT; - } + long epc = regs->cp0_epc; + int ret = 0; switch (insn.i_format.opcode) { /* @@ -64,18 +59,22 @@ int __compute_return_epc(struct pt_regs *regs) switch (insn.i_format.rt) { case bltz_op: case bltzl_op: - if ((long)regs->regs[insn.i_format.rs] < 0) + if ((long)regs->regs[insn.i_format.rs] < 0) { epc = epc + 4 + (insn.i_format.simmediate << 2); - else + if (insn.i_format.rt == bltzl_op) + ret = BRANCH_LIKELY_TAKEN; + } else epc += 8; regs->cp0_epc = epc; break; case bgez_op: case bgezl_op: - if ((long)regs->regs[insn.i_format.rs] >= 0) + if ((long)regs->regs[insn.i_format.rs] >= 0) { epc = epc + 4 + (insn.i_format.simmediate << 2); - else + if (insn.i_format.rt == bgezl_op) + ret = BRANCH_LIKELY_TAKEN; + } else epc += 8; regs->cp0_epc = epc; break; @@ -83,9 +82,11 @@ int __compute_return_epc(struct pt_regs *regs) case bltzal_op: case bltzall_op: regs->regs[31] = epc + 8; - if ((long)regs->regs[insn.i_format.rs] < 0) + if ((long)regs->regs[insn.i_format.rs] < 0) { epc = epc + 4 + (insn.i_format.simmediate << 2); - else + if (insn.i_format.rt == bltzall_op) + ret = BRANCH_LIKELY_TAKEN; + } else epc += 8; regs->cp0_epc = epc; break; @@ -93,12 +94,15 @@ int __compute_return_epc(struct pt_regs *regs) case bgezal_op: case bgezall_op: regs->regs[31] = epc + 8; - if ((long)regs->regs[insn.i_format.rs] >= 0) + if ((long)regs->regs[insn.i_format.rs] >= 0) { epc = epc + 4 + (insn.i_format.simmediate << 2); - else + if (insn.i_format.rt == bgezall_op) + ret = BRANCH_LIKELY_TAKEN; + } else epc += 8; regs->cp0_epc = epc; break; + case bposge32_op: if (!cpu_has_dsp) goto sigill; @@ -133,9 +137,11 @@ int __compute_return_epc(struct pt_regs *regs) case beq_op: case beql_op: if (regs->regs[insn.i_format.rs] == - regs->regs[insn.i_format.rt]) + regs->regs[insn.i_format.rt]) { epc = epc + 4 + (insn.i_format.simmediate << 2); - else + if (insn.i_format.rt == beql_op) + ret = BRANCH_LIKELY_TAKEN; + } else epc += 8; regs->cp0_epc = epc; break; @@ -143,9 +149,11 @@ int __compute_return_epc(struct pt_regs *regs) case bne_op: case bnel_op: if (regs->regs[insn.i_format.rs] != - regs->regs[insn.i_format.rt]) + regs->regs[insn.i_format.rt]) { epc = epc + 4 + (insn.i_format.simmediate << 2); - else + if (insn.i_format.rt == bnel_op) + ret = BRANCH_LIKELY_TAKEN; + } else epc += 8; regs->cp0_epc = epc; break; @@ -153,9 +161,11 @@ int __compute_return_epc(struct pt_regs *regs) case blez_op: /* not really i_format */ case blezl_op: /* rt field assumed to be zero */ - if ((long)regs->regs[insn.i_format.rs] <= 0) + if ((long)regs->regs[insn.i_format.rs] <= 0) { epc = epc + 4 + (insn.i_format.simmediate << 2); - else + if (insn.i_format.rt == bnel_op) + ret = BRANCH_LIKELY_TAKEN; + } else epc += 8; regs->cp0_epc = epc; break; @@ -163,9 +173,11 @@ int __compute_return_epc(struct pt_regs *regs) case bgtz_op: case bgtzl_op: /* rt field assumed to be zero */ - if ((long)regs->regs[insn.i_format.rs] > 0) + if ((long)regs->regs[insn.i_format.rs] > 0) { epc = epc + 4 + (insn.i_format.simmediate << 2); - else + if (insn.i_format.rt == bnel_op) + ret = BRANCH_LIKELY_TAKEN; + } else epc += 8; regs->cp0_epc = epc; break; @@ -187,18 +199,22 @@ int __compute_return_epc(struct pt_regs *regs) switch (insn.i_format.rt & 3) { case 0: /* bc1f */ case 2: /* bc1fl */ - if (~fcr31 & (1 << bit)) + if (~fcr31 & (1 << bit)) { epc = epc + 4 + (insn.i_format.simmediate << 2); - else + if (insn.i_format.rt == 2) + ret = BRANCH_LIKELY_TAKEN; + } else epc += 8; regs->cp0_epc = epc; break; case 1: /* bc1t */ case 3: /* bc1tl */ - if (fcr31 & (1 << bit)) + if (fcr31 & (1 << bit)) { epc = epc + 4 + (insn.i_format.simmediate << 2); - else + if (insn.i_format.rt == 3) + ret = BRANCH_LIKELY_TAKEN; + } else epc += 8; regs->cp0_epc = epc; break; @@ -239,15 +255,39 @@ int __compute_return_epc(struct pt_regs *regs) #endif } - return 0; + return ret; -unaligned: - printk("%s: unaligned epc - sending SIGBUS.\n", current->comm); +sigill: + printk("%s: DSP branch but not DSP ASE - sending SIGBUS.\n", current->comm); force_sig(SIGBUS, current); return -EFAULT; +} +EXPORT_SYMBOL_GPL(__compute_return_epc_for_insn); -sigill: - printk("%s: DSP branch but not DSP ASE - sending SIGBUS.\n", current->comm); +int __compute_return_epc(struct pt_regs *regs) +{ + unsigned int __user *addr; + long epc; + union mips_instruction insn; + + epc = regs->cp0_epc; + if (epc & 3) + goto unaligned; + + /* + * Read the instruction + */ + addr = (unsigned int __user *) epc; + if (__get_user(insn.word, addr)) { + force_sig(SIGSEGV, current); + return -EFAULT; + } + + return __compute_return_epc_for_insn(regs, insn); + +unaligned: + printk("%s: unaligned epc - sending SIGBUS.\n", current->comm); force_sig(SIGBUS, current); return -EFAULT; + } diff --git a/arch/mips/kernel/cevt-bcm1480.c b/arch/mips/kernel/cevt-bcm1480.c index 36c3898b76d..69bbfae183b 100644 --- a/arch/mips/kernel/cevt-bcm1480.c +++ b/arch/mips/kernel/cevt-bcm1480.c @@ -145,7 +145,7 @@ void __cpuinit sb1480_clockevent_init(void) bcm1480_unmask_irq(cpu, irq); action->handler = sibyte_counter_handler; - action->flags = IRQF_DISABLED | IRQF_PERCPU | IRQF_TIMER; + action->flags = IRQF_PERCPU | IRQF_TIMER; action->name = name; action->dev_id = cd; diff --git a/arch/mips/kernel/cevt-ds1287.c b/arch/mips/kernel/cevt-ds1287.c index 939157e397b..ed648cb5a69 100644 --- a/arch/mips/kernel/cevt-ds1287.c +++ b/arch/mips/kernel/cevt-ds1287.c @@ -108,7 +108,7 @@ static irqreturn_t ds1287_interrupt(int irq, void *dev_id) static struct irqaction ds1287_irqaction = { .handler = ds1287_interrupt, - .flags = IRQF_DISABLED | IRQF_PERCPU | IRQF_TIMER, + .flags = IRQF_PERCPU | IRQF_TIMER, .name = "ds1287", }; diff --git a/arch/mips/kernel/cevt-gt641xx.c b/arch/mips/kernel/cevt-gt641xx.c index 339f3639b90..831b47585b7 100644 --- a/arch/mips/kernel/cevt-gt641xx.c +++ b/arch/mips/kernel/cevt-gt641xx.c @@ -114,7 +114,7 @@ static irqreturn_t gt641xx_timer0_interrupt(int irq, void *dev_id) static struct irqaction gt641xx_timer0_irqaction = { .handler = gt641xx_timer0_interrupt, - .flags = IRQF_DISABLED | IRQF_PERCPU | IRQF_TIMER, + .flags = IRQF_PERCPU | IRQF_TIMER, .name = "gt641xx_timer0", }; diff --git a/arch/mips/kernel/cevt-r4k.c b/arch/mips/kernel/cevt-r4k.c index e2d8e199be3..51095dd9599 100644 --- a/arch/mips/kernel/cevt-r4k.c +++ b/arch/mips/kernel/cevt-r4k.c @@ -84,7 +84,7 @@ out: struct irqaction c0_compare_irqaction = { .handler = c0_compare_interrupt, - .flags = IRQF_DISABLED | IRQF_PERCPU | IRQF_TIMER, + .flags = IRQF_PERCPU | IRQF_TIMER, .name = "timer", }; diff --git a/arch/mips/kernel/cevt-sb1250.c b/arch/mips/kernel/cevt-sb1250.c index 590c54f28a8..e73439fd685 100644 --- a/arch/mips/kernel/cevt-sb1250.c +++ b/arch/mips/kernel/cevt-sb1250.c @@ -144,7 +144,7 @@ void __cpuinit sb1250_clockevent_init(void) sb1250_unmask_irq(cpu, irq); action->handler = sibyte_counter_handler; - action->flags = IRQF_DISABLED | IRQF_PERCPU | IRQF_TIMER; + action->flags = IRQF_PERCPU | IRQF_TIMER; action->name = name; action->dev_id = cd; diff --git a/arch/mips/kernel/cevt-txx9.c b/arch/mips/kernel/cevt-txx9.c index f0ab92a1b05..e5c30b1d086 100644 --- a/arch/mips/kernel/cevt-txx9.c +++ b/arch/mips/kernel/cevt-txx9.c @@ -146,7 +146,7 @@ static irqreturn_t txx9tmr_interrupt(int irq, void *dev_id) static struct irqaction txx9tmr_irq = { .handler = txx9tmr_interrupt, - .flags = IRQF_DISABLED | IRQF_PERCPU | IRQF_TIMER, + .flags = IRQF_PERCPU | IRQF_TIMER, .name = "txx9tmr", .dev_id = &txx9_clock_event_device, }; diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index c7d3cf1ce46..0bab464b8e3 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -191,6 +191,8 @@ void __init check_wait(void) case CPU_CAVIUM_OCTEON_PLUS: case CPU_CAVIUM_OCTEON2: case CPU_JZRISC: + case CPU_XLR: + case CPU_XLP: cpu_wait = r4k_wait; break; @@ -1014,6 +1016,13 @@ static inline void cpu_probe_netlogic(struct cpuinfo_mips *c, int cpu) { decode_configs(c); + if ((c->processor_id & 0xff00) == PRID_IMP_NETLOGIC_AU13XX) { + c->cputype = CPU_ALCHEMY; + __cpu_name[cpu] = "Au1300"; + /* following stuff is not for Alchemy */ + return; + } + c->options = (MIPS_CPU_TLB | MIPS_CPU_4KEX | MIPS_CPU_COUNTER | @@ -1023,6 +1032,12 @@ static inline void cpu_probe_netlogic(struct cpuinfo_mips *c, int cpu) MIPS_CPU_LLSC); switch (c->processor_id & 0xff00) { + case PRID_IMP_NETLOGIC_XLP8XX: + case PRID_IMP_NETLOGIC_XLP3XX: + c->cputype = CPU_XLP; + __cpu_name[cpu] = "Netlogic XLP"; + break; + case PRID_IMP_NETLOGIC_XLR732: case PRID_IMP_NETLOGIC_XLR716: case PRID_IMP_NETLOGIC_XLR532: @@ -1053,14 +1068,21 @@ static inline void cpu_probe_netlogic(struct cpuinfo_mips *c, int cpu) break; default: - printk(KERN_INFO "Unknown Netlogic chip id [%02x]!\n", + pr_info("Unknown Netlogic chip id [%02x]!\n", c->processor_id); c->cputype = CPU_XLR; break; } - c->isa_level = MIPS_CPU_ISA_M64R1; - c->tlbsize = ((read_c0_config1() >> 25) & 0x3f) + 1; + if (c->cputype == CPU_XLP) { + c->isa_level = MIPS_CPU_ISA_M64R2; + c->options |= (MIPS_CPU_FPU | MIPS_CPU_ULRI | MIPS_CPU_MCHECK); + /* This will be updated again after all threads are woken up */ + c->tlbsize = ((read_c0_config6() >> 16) & 0xffff) + 1; + } else { + c->isa_level = MIPS_CPU_ISA_M64R1; + c->tlbsize = ((read_c0_config1() >> 25) & 0x3f) + 1; + } } #ifdef CONFIG_64BIT diff --git a/arch/mips/kernel/i8253.c b/arch/mips/kernel/i8253.c index 7047bff35ea..c5bc344fc74 100644 --- a/arch/mips/kernel/i8253.c +++ b/arch/mips/kernel/i8253.c @@ -19,7 +19,7 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id) static struct irqaction irq0 = { .handler = timer_interrupt, - .flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_TIMER, + .flags = IRQF_NOBALANCING | IRQF_TIMER, .name = "timer" }; diff --git a/arch/mips/kernel/kprobes.c b/arch/mips/kernel/kprobes.c index ee28683fc2a..158467da9bc 100644 --- a/arch/mips/kernel/kprobes.c +++ b/arch/mips/kernel/kprobes.c @@ -25,10 +25,12 @@ #include <linux/kprobes.h> #include <linux/preempt.h> +#include <linux/uaccess.h> #include <linux/kdebug.h> #include <linux/slab.h> #include <asm/ptrace.h> +#include <asm/branch.h> #include <asm/break.h> #include <asm/inst.h> @@ -112,17 +114,49 @@ insn_ok: return 0; } +/* + * insn_has_ll_or_sc function checks whether instruction is ll or sc + * one; putting breakpoint on top of atomic ll/sc pair is bad idea; + * so we need to prevent it and refuse kprobes insertion for such + * instructions; cannot do much about breakpoint in the middle of + * ll/sc pair; it is upto user to avoid those places + */ +static int __kprobes insn_has_ll_or_sc(union mips_instruction insn) +{ + int ret = 0; + + switch (insn.i_format.opcode) { + case ll_op: + case lld_op: + case sc_op: + case scd_op: + ret = 1; + break; + default: + break; + } + return ret; +} + int __kprobes arch_prepare_kprobe(struct kprobe *p) { union mips_instruction insn; union mips_instruction prev_insn; int ret = 0; - prev_insn = p->addr[-1]; insn = p->addr[0]; - if (insn_has_delayslot(insn) || insn_has_delayslot(prev_insn)) { - pr_notice("Kprobes for branch and jump instructions are not supported\n"); + if (insn_has_ll_or_sc(insn)) { + pr_notice("Kprobes for ll and sc instructions are not" + "supported\n"); + ret = -EINVAL; + goto out; + } + + if ((probe_kernel_read(&prev_insn, p->addr - 1, + sizeof(mips_instruction)) == 0) && + insn_has_delayslot(prev_insn)) { + pr_notice("Kprobes for branch delayslot are not supported\n"); ret = -EINVAL; goto out; } @@ -138,9 +172,20 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p) * In the kprobe->ainsn.insn[] array we store the original * instruction at index zero and a break trap instruction at * index one. + * + * On MIPS arch if the instruction at probed address is a + * branch instruction, we need to execute the instruction at + * Branch Delayslot (BD) at the time of probe hit. As MIPS also + * doesn't have single stepping support, the BD instruction can + * not be executed in-line and it would be executed on SSOL slot + * using a normal breakpoint instruction in the next slot. + * So, read the instruction and save it for later execution. */ + if (insn_has_delayslot(insn)) + memcpy(&p->ainsn.insn[0], p->addr + 1, sizeof(kprobe_opcode_t)); + else + memcpy(&p->ainsn.insn[0], p->addr, sizeof(kprobe_opcode_t)); - memcpy(&p->ainsn.insn[0], p->addr, sizeof(kprobe_opcode_t)); p->ainsn.insn[1] = breakpoint2_insn; p->opcode = *p->addr; @@ -191,16 +236,96 @@ static void set_current_kprobe(struct kprobe *p, struct pt_regs *regs, kcb->kprobe_saved_epc = regs->cp0_epc; } -static void prepare_singlestep(struct kprobe *p, struct pt_regs *regs) +/** + * evaluate_branch_instrucion - + * + * Evaluate the branch instruction at probed address during probe hit. The + * result of evaluation would be the updated epc. The insturction in delayslot + * would actually be single stepped using a normal breakpoint) on SSOL slot. + * + * The result is also saved in the kprobe control block for later use, + * in case we need to execute the delayslot instruction. The latter will be + * false for NOP instruction in dealyslot and the branch-likely instructions + * when the branch is taken. And for those cases we set a flag as + * SKIP_DELAYSLOT in the kprobe control block + */ +static int evaluate_branch_instruction(struct kprobe *p, struct pt_regs *regs, + struct kprobe_ctlblk *kcb) { + union mips_instruction insn = p->opcode; + long epc; + int ret = 0; + + epc = regs->cp0_epc; + if (epc & 3) + goto unaligned; + + if (p->ainsn.insn->word == 0) + kcb->flags |= SKIP_DELAYSLOT; + else + kcb->flags &= ~SKIP_DELAYSLOT; + + ret = __compute_return_epc_for_insn(regs, insn); + if (ret < 0) + return ret; + + if (ret == BRANCH_LIKELY_TAKEN) + kcb->flags |= SKIP_DELAYSLOT; + + kcb->target_epc = regs->cp0_epc; + + return 0; + +unaligned: + pr_notice("%s: unaligned epc - sending SIGBUS.\n", current->comm); + force_sig(SIGBUS, current); + return -EFAULT; + +} + +static void prepare_singlestep(struct kprobe *p, struct pt_regs *regs, + struct kprobe_ctlblk *kcb) +{ + int ret = 0; + regs->cp0_status &= ~ST0_IE; /* single step inline if the instruction is a break */ if (p->opcode.word == breakpoint_insn.word || p->opcode.word == breakpoint2_insn.word) regs->cp0_epc = (unsigned long)p->addr; - else - regs->cp0_epc = (unsigned long)&p->ainsn.insn[0]; + else if (insn_has_delayslot(p->opcode)) { + ret = evaluate_branch_instruction(p, regs, kcb); + if (ret < 0) { + pr_notice("Kprobes: Error in evaluating branch\n"); + return; + } + } + regs->cp0_epc = (unsigned long)&p->ainsn.insn[0]; +} + +/* + * Called after single-stepping. p->addr is the address of the + * instruction whose first byte has been replaced by the "break 0" + * instruction. To avoid the SMP problems that can occur when we + * temporarily put back the original opcode to single-step, we + * single-stepped a copy of the instruction. The address of this + * copy is p->ainsn.insn. + * + * This function prepares to return from the post-single-step + * breakpoint trap. In case of branch instructions, the target + * epc to be restored. + */ +static void __kprobes resume_execution(struct kprobe *p, + struct pt_regs *regs, + struct kprobe_ctlblk *kcb) +{ + if (insn_has_delayslot(p->opcode)) + regs->cp0_epc = kcb->target_epc; + else { + unsigned long orig_epc = kcb->kprobe_saved_epc; + regs->cp0_epc = orig_epc + 4; + } } static int __kprobes kprobe_handler(struct pt_regs *regs) @@ -239,8 +364,13 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) save_previous_kprobe(kcb); set_current_kprobe(p, regs, kcb); kprobes_inc_nmissed_count(p); - prepare_singlestep(p, regs); + prepare_singlestep(p, regs, kcb); kcb->kprobe_status = KPROBE_REENTER; + if (kcb->flags & SKIP_DELAYSLOT) { + resume_execution(p, regs, kcb); + restore_previous_kprobe(kcb); + preempt_enable_no_resched(); + } return 1; } else { if (addr->word != breakpoint_insn.word) { @@ -284,8 +414,16 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) } ss_probe: - prepare_singlestep(p, regs); - kcb->kprobe_status = KPROBE_HIT_SS; + prepare_singlestep(p, regs, kcb); + if (kcb->flags & SKIP_DELAYSLOT) { + kcb->kprobe_status = KPROBE_HIT_SSDONE; + if (p->post_handler) + p->post_handler(p, regs, 0); + resume_execution(p, regs, kcb); + preempt_enable_no_resched(); + } else + kcb->kprobe_status = KPROBE_HIT_SS; + return 1; no_kprobe: @@ -294,25 +432,6 @@ no_kprobe: } -/* - * Called after single-stepping. p->addr is the address of the - * instruction whose first byte has been replaced by the "break 0" - * instruction. To avoid the SMP problems that can occur when we - * temporarily put back the original opcode to single-step, we - * single-stepped a copy of the instruction. The address of this - * copy is p->ainsn.insn. - * - * This function prepares to return from the post-single-step - * breakpoint trap. - */ -static void __kprobes resume_execution(struct kprobe *p, - struct pt_regs *regs, - struct kprobe_ctlblk *kcb) -{ - unsigned long orig_epc = kcb->kprobe_saved_epc; - regs->cp0_epc = orig_epc + 4; -} - static inline int post_kprobe_handler(struct pt_regs *regs) { struct kprobe *cur = kprobe_running(); diff --git a/arch/mips/kernel/perf_event_mipsxx.c b/arch/mips/kernel/perf_event_mipsxx.c index 4f2971bcf8e..bda4bc9e698 100644 --- a/arch/mips/kernel/perf_event_mipsxx.c +++ b/arch/mips/kernel/perf_event_mipsxx.c @@ -621,11 +621,6 @@ static int mipspmu_event_init(struct perf_event *event) return -ENODEV; if (!atomic_inc_not_zero(&active_events)) { - if (atomic_read(&active_events) > MIPS_MAX_HWEVENTS) { - atomic_dec(&active_events); - return -ENOSPC; - } - mutex_lock(&pmu_reserve_mutex); if (atomic_read(&active_events) == 0) err = mipspmu_get_irq(); @@ -638,11 +633,7 @@ static int mipspmu_event_init(struct perf_event *event) if (err) return err; - err = __hw_perf_event_init(event); - if (err) - hw_perf_event_destroy(event); - - return err; + return __hw_perf_event_init(event); } static struct pmu pmu = { @@ -712,18 +703,6 @@ static const struct mips_perf_event *mipspmu_map_cache_event(u64 config) } -static int validate_event(struct cpu_hw_events *cpuc, - struct perf_event *event) -{ - struct hw_perf_event fake_hwc = event->hw; - - /* Allow mixed event group. So return 1 to pass validation. */ - if (event->pmu != &pmu || event->state <= PERF_EVENT_STATE_OFF) - return 1; - - return mipsxx_pmu_alloc_counter(cpuc, &fake_hwc) >= 0; -} - static int validate_group(struct perf_event *event) { struct perf_event *sibling, *leader = event->group_leader; @@ -731,15 +710,15 @@ static int validate_group(struct perf_event *event) memset(&fake_cpuc, 0, sizeof(fake_cpuc)); - if (!validate_event(&fake_cpuc, leader)) + if (mipsxx_pmu_alloc_counter(&fake_cpuc, &leader->hw) < 0) return -ENOSPC; list_for_each_entry(sibling, &leader->sibling_list, group_entry) { - if (!validate_event(&fake_cpuc, sibling)) + if (mipsxx_pmu_alloc_counter(&fake_cpuc, &sibling->hw) < 0) return -ENOSPC; } - if (!validate_event(&fake_cpuc, event)) + if (mipsxx_pmu_alloc_counter(&fake_cpuc, &event->hw) < 0) return -ENOSPC; return 0; @@ -1279,13 +1258,14 @@ static int __hw_perf_event_init(struct perf_event *event) } err = 0; - if (event->group_leader != event) { + if (event->group_leader != event) err = validate_group(event); - if (err) - return -EINVAL; - } event->destroy = hw_perf_event_destroy; + + if (err) + event->destroy(event); + return err; } @@ -1380,20 +1360,10 @@ static irqreturn_t mipsxx_pmu_handle_irq(int irq, void *dev) } /* 24K */ -#define IS_UNSUPPORTED_24K_EVENT(r, b) \ - ((b) == 12 || (r) == 151 || (r) == 152 || (b) == 26 || \ - (b) == 27 || (r) == 28 || (r) == 158 || (b) == 31 || \ - (b) == 32 || (b) == 34 || (b) == 36 || (r) == 168 || \ - (r) == 172 || (b) == 47 || ((b) >= 56 && (b) <= 63) || \ - ((b) >= 68 && (b) <= 127)) #define IS_BOTH_COUNTERS_24K_EVENT(b) \ ((b) == 0 || (b) == 1 || (b) == 11) /* 34K */ -#define IS_UNSUPPORTED_34K_EVENT(r, b) \ - ((b) == 12 || (r) == 27 || (r) == 158 || (b) == 36 || \ - (b) == 38 || (r) == 175 || ((b) >= 56 && (b) <= 63) || \ - ((b) >= 68 && (b) <= 127)) #define IS_BOTH_COUNTERS_34K_EVENT(b) \ ((b) == 0 || (b) == 1 || (b) == 11) #ifdef CONFIG_MIPS_MT_SMP @@ -1406,20 +1376,10 @@ static irqreturn_t mipsxx_pmu_handle_irq(int irq, void *dev) #endif /* 74K */ -#define IS_UNSUPPORTED_74K_EVENT(r, b) \ - ((r) == 5 || ((r) >= 135 && (r) <= 137) || \ - ((b) >= 10 && (b) <= 12) || (b) == 22 || (b) == 27 || \ - (b) == 33 || (b) == 34 || ((b) >= 47 && (b) <= 49) || \ - (r) == 178 || (b) == 55 || (b) == 57 || (b) == 60 || \ - (b) == 61 || (r) == 62 || (r) == 191 || \ - ((b) >= 64 && (b) <= 127)) #define IS_BOTH_COUNTERS_74K_EVENT(b) \ ((b) == 0 || (b) == 1) /* 1004K */ -#define IS_UNSUPPORTED_1004K_EVENT(r, b) \ - ((b) == 12 || (r) == 27 || (r) == 158 || (b) == 38 || \ - (r) == 175 || (b) == 63 || ((b) >= 68 && (b) <= 127)) #define IS_BOTH_COUNTERS_1004K_EVENT(b) \ ((b) == 0 || (b) == 1 || (b) == 11) #ifdef CONFIG_MIPS_MT_SMP @@ -1445,11 +1405,10 @@ static const struct mips_perf_event *mipsxx_pmu_map_raw_event(u64 config) unsigned int raw_id = config & 0xff; unsigned int base_id = raw_id & 0x7f; + raw_event.event_id = base_id; + switch (current_cpu_type()) { case CPU_24K: - if (IS_UNSUPPORTED_24K_EVENT(raw_id, base_id)) - return ERR_PTR(-EOPNOTSUPP); - raw_event.event_id = base_id; if (IS_BOTH_COUNTERS_24K_EVENT(base_id)) raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD; else @@ -1464,9 +1423,6 @@ static const struct mips_perf_event *mipsxx_pmu_map_raw_event(u64 config) #endif break; case CPU_34K: - if (IS_UNSUPPORTED_34K_EVENT(raw_id, base_id)) - return ERR_PTR(-EOPNOTSUPP); - raw_event.event_id = base_id; if (IS_BOTH_COUNTERS_34K_EVENT(base_id)) raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD; else @@ -1482,9 +1438,6 @@ static const struct mips_perf_event *mipsxx_pmu_map_raw_event(u64 config) #endif break; case CPU_74K: - if (IS_UNSUPPORTED_74K_EVENT(raw_id, base_id)) - return ERR_PTR(-EOPNOTSUPP); - raw_event.event_id = base_id; if (IS_BOTH_COUNTERS_74K_EVENT(base_id)) raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD; else @@ -1495,9 +1448,6 @@ static const struct mips_perf_event *mipsxx_pmu_map_raw_event(u64 config) #endif break; case CPU_1004K: - if (IS_UNSUPPORTED_1004K_EVENT(raw_id, base_id)) - return ERR_PTR(-EOPNOTSUPP); - raw_event.event_id = base_id; if (IS_BOTH_COUNTERS_1004K_EVENT(base_id)) raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD; else diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c index 933166f44a6..a9d801dec6b 100644 --- a/arch/mips/kernel/rtlx.c +++ b/arch/mips/kernel/rtlx.c @@ -473,7 +473,6 @@ static const struct file_operations rtlx_fops = { static struct irqaction rtlx_irq = { .handler = rtlx_interrupt, - .flags = IRQF_DISABLED, .name = "RTLX", }; diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index 84af26ab221..e86c2cf554a 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -121,6 +121,9 @@ static void __init print_memory_map(void) case BOOT_MEM_RAM: printk(KERN_CONT "(usable)\n"); break; + case BOOT_MEM_INIT_RAM: + printk(KERN_CONT "(usable after init)\n"); + break; case BOOT_MEM_ROM_DATA: printk(KERN_CONT "(ROM data)\n"); break; @@ -361,15 +364,24 @@ static void __init bootmem_init(void) for (i = 0; i < boot_mem_map.nr_map; i++) { unsigned long start, end, size; + start = PFN_UP(boot_mem_map.map[i].addr); + end = PFN_DOWN(boot_mem_map.map[i].addr + + boot_mem_map.map[i].size); + /* * Reserve usable memory. */ - if (boot_mem_map.map[i].type != BOOT_MEM_RAM) + switch (boot_mem_map.map[i].type) { + case BOOT_MEM_RAM: + break; + case BOOT_MEM_INIT_RAM: + memory_present(0, start, end); continue; + default: + /* Not usable memory */ + continue; + } - start = PFN_UP(boot_mem_map.map[i].addr); - end = PFN_DOWN(boot_mem_map.map[i].addr - + boot_mem_map.map[i].size); /* * We are rounding up the start address of usable memory * and at the end of the usable range downwards. @@ -455,11 +467,33 @@ early_param("mem", early_parse_mem); static void __init arch_mem_init(char **cmdline_p) { + phys_t init_mem, init_end, init_size; + extern void plat_mem_setup(void); /* call board setup routine */ plat_mem_setup(); + init_mem = PFN_UP(__pa_symbol(&__init_begin)) << PAGE_SHIFT; + init_end = PFN_DOWN(__pa_symbol(&__init_end)) << PAGE_SHIFT; + init_size = init_end - init_mem; + if (init_size) { + /* Make sure it is in the boot_mem_map */ + int i, found; + found = 0; + for (i = 0; i < boot_mem_map.nr_map; i++) { + if (init_mem >= boot_mem_map.map[i].addr && + init_mem < (boot_mem_map.map[i].addr + + boot_mem_map.map[i].size)) { + found = 1; + break; + } + } + if (!found) + add_memory_region(init_mem, init_size, + BOOT_MEM_INIT_RAM); + } + pr_info("Determined physical RAM map:\n"); print_memory_map(); @@ -523,6 +557,7 @@ static void __init resource_init(void) res = alloc_bootmem(sizeof(struct resource)); switch (boot_mem_map.map[i].type) { case BOOT_MEM_RAM: + case BOOT_MEM_INIT_RAM: case BOOT_MEM_ROM_DATA: res->name = "System RAM"; break; diff --git a/arch/mips/kernel/smp-bmips.c b/arch/mips/kernel/smp-bmips.c new file mode 100644 index 00000000000..58fe71afd87 --- /dev/null +++ b/arch/mips/kernel/smp-bmips.c @@ -0,0 +1,458 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2011 by Kevin Cernekee (cernekee@gmail.com) + * + * SMP support for BMIPS + */ + +#include <linux/version.h> +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/mm.h> +#include <linux/delay.h> +#include <linux/smp.h> +#include <linux/interrupt.h> +#include <linux/spinlock.h> +#include <linux/init.h> +#include <linux/cpu.h> +#include <linux/cpumask.h> +#include <linux/reboot.h> +#include <linux/io.h> +#include <linux/compiler.h> +#include <linux/linkage.h> +#include <linux/bug.h> +#include <linux/kernel.h> + +#include <asm/time.h> +#include <asm/pgtable.h> +#include <asm/processor.h> +#include <asm/system.h> +#include <asm/bootinfo.h> +#include <asm/pmon.h> +#include <asm/cacheflush.h> +#include <asm/tlbflush.h> +#include <asm/mipsregs.h> +#include <asm/bmips.h> +#include <asm/traps.h> +#include <asm/barrier.h> + +static int __maybe_unused max_cpus = 1; + +/* these may be configured by the platform code */ +int bmips_smp_enabled = 1; +int bmips_cpu_offset; +cpumask_t bmips_booted_mask; + +#ifdef CONFIG_SMP + +/* initial $sp, $gp - used by arch/mips/kernel/bmips_vec.S */ +unsigned long bmips_smp_boot_sp; +unsigned long bmips_smp_boot_gp; + +static void bmips_send_ipi_single(int cpu, unsigned int action); +static irqreturn_t bmips_ipi_interrupt(int irq, void *dev_id); + +/* SW interrupts 0,1 are used for interprocessor signaling */ +#define IPI0_IRQ (MIPS_CPU_IRQ_BASE + 0) +#define IPI1_IRQ (MIPS_CPU_IRQ_BASE + 1) + +#define CPUNUM(cpu, shift) (((cpu) + bmips_cpu_offset) << (shift)) +#define ACTION_CLR_IPI(cpu, ipi) (0x2000 | CPUNUM(cpu, 9) | ((ipi) << 8)) +#define ACTION_SET_IPI(cpu, ipi) (0x3000 | CPUNUM(cpu, 9) | ((ipi) << 8)) +#define ACTION_BOOT_THREAD(cpu) (0x08 | CPUNUM(cpu, 0)) + +static void __init bmips_smp_setup(void) +{ + int i; + +#if defined(CONFIG_CPU_BMIPS4350) || defined(CONFIG_CPU_BMIPS4380) + /* arbitration priority */ + clear_c0_brcm_cmt_ctrl(0x30); + + /* NBK and weak order flags */ + set_c0_brcm_config_0(0x30000); + + /* + * MIPS interrupts 0,1 (SW INT 0,1) cross over to the other thread + * MIPS interrupt 2 (HW INT 0) is the CPU0 L1 controller output + * MIPS interrupt 3 (HW INT 1) is the CPU1 L1 controller output + */ + change_c0_brcm_cmt_intr(0xf8018000, + (0x02 << 27) | (0x03 << 15)); + + /* single core, 2 threads (2 pipelines) */ + max_cpus = 2; +#elif defined(CONFIG_CPU_BMIPS5000) + /* enable raceless SW interrupts */ + set_c0_brcm_config(0x03 << 22); + + /* route HW interrupt 0 to CPU0, HW interrupt 1 to CPU1 */ + change_c0_brcm_mode(0x1f << 27, 0x02 << 27); + + /* N cores, 2 threads per core */ + max_cpus = (((read_c0_brcm_config() >> 6) & 0x03) + 1) << 1; + + /* clear any pending SW interrupts */ + for (i = 0; i < max_cpus; i++) { + write_c0_brcm_action(ACTION_CLR_IPI(i, 0)); + write_c0_brcm_action(ACTION_CLR_IPI(i, 1)); + } +#endif + + if (!bmips_smp_enabled) + max_cpus = 1; + + /* this can be overridden by the BSP */ + if (!board_ebase_setup) + board_ebase_setup = &bmips_ebase_setup; + + for (i = 0; i < max_cpus; i++) { + __cpu_number_map[i] = 1; + __cpu_logical_map[i] = 1; + set_cpu_possible(i, 1); + set_cpu_present(i, 1); + } +} + +/* + * IPI IRQ setup - runs on CPU0 + */ +static void bmips_prepare_cpus(unsigned int max_cpus) +{ + if (request_irq(IPI0_IRQ, bmips_ipi_interrupt, IRQF_PERCPU, + "smp_ipi0", NULL)) + panic("Can't request IPI0 interrupt\n"); + if (request_irq(IPI1_IRQ, bmips_ipi_interrupt, IRQF_PERCPU, + "smp_ipi1", NULL)) + panic("Can't request IPI1 interrupt\n"); +} + +/* + * Tell the hardware to boot CPUx - runs on CPU0 + */ +static void bmips_boot_secondary(int cpu, struct task_struct *idle) +{ + bmips_smp_boot_sp = __KSTK_TOS(idle); + bmips_smp_boot_gp = (unsigned long)task_thread_info(idle); + mb(); + + /* + * Initial boot sequence for secondary CPU: + * bmips_reset_nmi_vec @ a000_0000 -> + * bmips_smp_entry -> + * plat_wired_tlb_setup (cached function call; optional) -> + * start_secondary (cached jump) + * + * Warm restart sequence: + * play_dead WAIT loop -> + * bmips_smp_int_vec @ BMIPS_WARM_RESTART_VEC -> + * eret to play_dead -> + * bmips_secondary_reentry -> + * start_secondary + */ + + pr_info("SMP: Booting CPU%d...\n", cpu); + + if (cpumask_test_cpu(cpu, &bmips_booted_mask)) + bmips_send_ipi_single(cpu, 0); + else { +#if defined(CONFIG_CPU_BMIPS4350) || defined(CONFIG_CPU_BMIPS4380) + set_c0_brcm_cmt_ctrl(0x01); +#elif defined(CONFIG_CPU_BMIPS5000) + if (cpu & 0x01) + write_c0_brcm_action(ACTION_BOOT_THREAD(cpu)); + else { + /* + * core N thread 0 was already booted; just + * pulse the NMI line + */ + bmips_write_zscm_reg(0x210, 0xc0000000); + udelay(10); + bmips_write_zscm_reg(0x210, 0x00); + } +#endif + cpumask_set_cpu(cpu, &bmips_booted_mask); + } +} + +/* + * Early setup - runs on secondary CPU after cache probe + */ +static void bmips_init_secondary(void) +{ + /* move NMI vector to kseg0, in case XKS01 is enabled */ + +#if defined(CONFIG_CPU_BMIPS4350) || defined(CONFIG_CPU_BMIPS4380) + void __iomem *cbr = BMIPS_GET_CBR(); + unsigned long old_vec; + + old_vec = __raw_readl(cbr + BMIPS_RELO_VECTOR_CONTROL_1); + __raw_writel(old_vec & ~0x20000000, cbr + BMIPS_RELO_VECTOR_CONTROL_1); + + clear_c0_cause(smp_processor_id() ? C_SW1 : C_SW0); +#elif defined(CONFIG_CPU_BMIPS5000) + write_c0_brcm_bootvec(read_c0_brcm_bootvec() & + (smp_processor_id() & 0x01 ? ~0x20000000 : ~0x2000)); + + write_c0_brcm_action(ACTION_CLR_IPI(smp_processor_id(), 0)); +#endif + + /* make sure there won't be a timer interrupt for a little while */ + write_c0_compare(read_c0_count() + mips_hpt_frequency / HZ); + + irq_enable_hazard(); + set_c0_status(IE_SW0 | IE_SW1 | IE_IRQ1 | IE_IRQ5 | ST0_IE); + irq_enable_hazard(); +} + +/* + * Late setup - runs on secondary CPU before entering the idle loop + */ +static void bmips_smp_finish(void) +{ + pr_info("SMP: CPU%d is running\n", smp_processor_id()); +} + +/* + * Runs on CPU0 after all CPUs have been booted + */ +static void bmips_cpus_done(void) +{ +} + +#if defined(CONFIG_CPU_BMIPS5000) + +/* + * BMIPS5000 raceless IPIs + * + * Each CPU has two inbound SW IRQs which are independent of all other CPUs. + * IPI0 is used for SMP_RESCHEDULE_YOURSELF + * IPI1 is used for SMP_CALL_FUNCTION + */ + +static void bmips_send_ipi_single(int cpu, unsigned int action) +{ + write_c0_brcm_action(ACTION_SET_IPI(cpu, action == SMP_CALL_FUNCTION)); +} + +static irqreturn_t bmips_ipi_interrupt(int irq, void *dev_id) +{ + int action = irq - IPI0_IRQ; + + write_c0_brcm_action(ACTION_CLR_IPI(smp_processor_id(), action)); + + if (action == 0) + scheduler_ipi(); + else + smp_call_function_interrupt(); + + return IRQ_HANDLED; +} + +#else + +/* + * BMIPS43xx racey IPIs + * + * We use one inbound SW IRQ for each CPU. + * + * A spinlock must be held in order to keep CPUx from accidentally clearing + * an incoming IPI when it writes CP0 CAUSE to raise an IPI on CPUy. The + * same spinlock is used to protect the action masks. + */ + +static DEFINE_SPINLOCK(ipi_lock); +static DEFINE_PER_CPU(int, ipi_action_mask); + +static void bmips_send_ipi_single(int cpu, unsigned int action) +{ + unsigned long flags; + + spin_lock_irqsave(&ipi_lock, flags); + set_c0_cause(cpu ? C_SW1 : C_SW0); + per_cpu(ipi_action_mask, cpu) |= action; + irq_enable_hazard(); + spin_unlock_irqrestore(&ipi_lock, flags); +} + +static irqreturn_t bmips_ipi_interrupt(int irq, void *dev_id) +{ + unsigned long flags; + int action, cpu = irq - IPI0_IRQ; + + spin_lock_irqsave(&ipi_lock, flags); + action = __get_cpu_var(ipi_action_mask); + per_cpu(ipi_action_mask, cpu) = 0; + clear_c0_cause(cpu ? C_SW1 : C_SW0); + spin_unlock_irqrestore(&ipi_lock, flags); + + if (action & SMP_RESCHEDULE_YOURSELF) + scheduler_ipi(); + if (action & SMP_CALL_FUNCTION) + smp_call_function_interrupt(); + + return IRQ_HANDLED; +} + +#endif /* BMIPS type */ + +static void bmips_send_ipi_mask(const struct cpumask *mask, + unsigned int action) +{ + unsigned int i; + + for_each_cpu(i, mask) + bmips_send_ipi_single(i, action); +} + +#ifdef CONFIG_HOTPLUG_CPU + +static int bmips_cpu_disable(void) +{ + unsigned int cpu = smp_processor_id(); + + if (cpu == 0) + return -EBUSY; + + pr_info("SMP: CPU%d is offline\n", cpu); + + cpu_clear(cpu, cpu_online_map); + cpu_clear(cpu, cpu_callin_map); + + local_flush_tlb_all(); + local_flush_icache_range(0, ~0); + + return 0; +} + +static void bmips_cpu_die(unsigned int cpu) +{ +} + +void __ref play_dead(void) +{ + idle_task_exit(); + + /* flush data cache */ + _dma_cache_wback_inv(0, ~0); + + /* + * Wakeup is on SW0 or SW1; disable everything else + * Use BEV !IV (BMIPS_WARM_RESTART_VEC) to avoid the regular Linux + * IRQ handlers; this clears ST0_IE and returns immediately. + */ + clear_c0_cause(CAUSEF_IV | C_SW0 | C_SW1); + change_c0_status(IE_IRQ5 | IE_IRQ1 | IE_SW0 | IE_SW1 | ST0_IE | ST0_BEV, + IE_SW0 | IE_SW1 | ST0_IE | ST0_BEV); + irq_disable_hazard(); + + /* + * wait for SW interrupt from bmips_boot_secondary(), then jump + * back to start_secondary() + */ + __asm__ __volatile__( + " wait\n" + " j bmips_secondary_reentry\n" + : : : "memory"); +} + +#endif /* CONFIG_HOTPLUG_CPU */ + +struct plat_smp_ops bmips_smp_ops = { + .smp_setup = bmips_smp_setup, + .prepare_cpus = bmips_prepare_cpus, + .boot_secondary = bmips_boot_secondary, + .smp_finish = bmips_smp_finish, + .init_secondary = bmips_init_secondary, + .cpus_done = bmips_cpus_done, + .send_ipi_single = bmips_send_ipi_single, + .send_ipi_mask = bmips_send_ipi_mask, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_disable = bmips_cpu_disable, + .cpu_die = bmips_cpu_die, +#endif +}; + +#endif /* CONFIG_SMP */ + +/*********************************************************************** + * BMIPS vector relocation + * This is primarily used for SMP boot, but it is applicable to some + * UP BMIPS systems as well. + ***********************************************************************/ + +static void __cpuinit bmips_wr_vec(unsigned long dst, char *start, char *end) +{ + memcpy((void *)dst, start, end - start); + dma_cache_wback((unsigned long)start, end - start); + local_flush_icache_range(dst, dst + (end - start)); + instruction_hazard(); +} + +static inline void __cpuinit bmips_nmi_handler_setup(void) +{ + bmips_wr_vec(BMIPS_NMI_RESET_VEC, &bmips_reset_nmi_vec, + &bmips_reset_nmi_vec_end); + bmips_wr_vec(BMIPS_WARM_RESTART_VEC, &bmips_smp_int_vec, + &bmips_smp_int_vec_end); +} + +void __cpuinit bmips_ebase_setup(void) +{ + unsigned long new_ebase = ebase; + void __iomem __maybe_unused *cbr; + + BUG_ON(ebase != CKSEG0); + +#if defined(CONFIG_CPU_BMIPS4350) + /* + * BMIPS4350 cannot relocate the normal vectors, but it + * can relocate the BEV=1 vectors. So CPU1 starts up at + * the relocated BEV=1, IV=0 general exception vector @ + * 0xa000_0380. + * + * set_uncached_handler() is used here because: + * - CPU1 will run this from uncached space + * - None of the cacheflush functions are set up yet + */ + set_uncached_handler(BMIPS_WARM_RESTART_VEC - CKSEG0, + &bmips_smp_int_vec, 0x80); + __sync(); + return; +#elif defined(CONFIG_CPU_BMIPS4380) + /* + * 0x8000_0000: reset/NMI (initially in kseg1) + * 0x8000_0400: normal vectors + */ + new_ebase = 0x80000400; + cbr = BMIPS_GET_CBR(); + __raw_writel(0x80080800, cbr + BMIPS_RELO_VECTOR_CONTROL_0); + __raw_writel(0xa0080800, cbr + BMIPS_RELO_VECTOR_CONTROL_1); +#elif defined(CONFIG_CPU_BMIPS5000) + /* + * 0x8000_0000: reset/NMI (initially in kseg1) + * 0x8000_1000: normal vectors + */ + new_ebase = 0x80001000; + write_c0_brcm_bootvec(0xa0088008); + write_c0_ebase(new_ebase); + if (max_cpus > 2) + bmips_write_zscm_reg(0xa0, 0xa008a008); +#else + return; +#endif + board_nmi_handler_setup = &bmips_nmi_handler_setup; + ebase = new_ebase; +} + +asmlinkage void __weak plat_wired_tlb_setup(void) +{ + /* + * Called when starting/restarting a secondary CPU. + * Kernel stacks and other important data might only be accessible + * once the wired entries are present. + */ +} diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c index f0895e70e28..0a42ff3ff6a 100644 --- a/arch/mips/kernel/smtc.c +++ b/arch/mips/kernel/smtc.c @@ -559,7 +559,7 @@ void smtc_prepare_cpus(int cpus) pipi = kmalloc(nipi *sizeof(struct smtc_ipi), GFP_KERNEL); if (pipi == NULL) - panic("kmalloc of IPI message buffers failed\n"); + panic("kmalloc of IPI message buffers failed"); else printk("IPI buffer pool of %d buffers\n", nipi); for (i = 0; i < nipi; i++) { @@ -813,7 +813,7 @@ void smtc_send_ipi(int cpu, int type, unsigned int action) if (pipi == NULL) { bust_spinlocks(1); mips_mt_regdump(dvpe()); - panic("IPI Msg. Buffers Depleted\n"); + panic("IPI Msg. Buffers Depleted"); } pipi->type = type; pipi->arg = (void *)action; @@ -1130,7 +1130,7 @@ static void ipi_irq_dispatch(void) static struct irqaction irq_ipi = { .handler = ipi_interrupt, - .flags = IRQF_DISABLED | IRQF_PERCPU, + .flags = IRQF_PERCPU, .name = "SMTC_IPI" }; diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 5c8a49d5505..48240fd8c29 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -91,6 +91,7 @@ int (*board_be_handler)(struct pt_regs *regs, int is_fixup); void (*board_nmi_handler_setup)(void); void (*board_ejtag_handler_setup)(void); void (*board_bind_eic_interrupt)(int irq, int regset); +void (*board_ebase_setup)(void); static void show_raw_backtrace(unsigned long reg29) @@ -400,7 +401,7 @@ void __noreturn die(const char *str, struct pt_regs *regs) panic("Fatal exception in interrupt"); if (panic_on_oops) { - printk(KERN_EMERG "Fatal exception: panic in 5 seconds\n"); + printk(KERN_EMERG "Fatal exception: panic in 5 seconds"); ssleep(5); panic("Fatal exception"); } @@ -1150,7 +1151,7 @@ asmlinkage void do_mt(struct pt_regs *regs) asmlinkage void do_dsp(struct pt_regs *regs) { if (cpu_has_dsp) - panic("Unexpected DSP exception\n"); + panic("Unexpected DSP exception"); force_sig(SIGILL, current); } @@ -1339,9 +1340,18 @@ void ejtag_exception_handler(struct pt_regs *regs) /* * NMI exception handler. + * No lock; only written during early bootup by CPU 0. */ +static RAW_NOTIFIER_HEAD(nmi_chain); + +int register_nmi_notifier(struct notifier_block *nb) +{ + return raw_notifier_chain_register(&nmi_chain, nb); +} + NORET_TYPE void ATTRIB_NORET nmi_exception_handler(struct pt_regs *regs) { + raw_notifier_call_chain(&nmi_chain, 0, regs); bust_spinlocks(1); printk("NMI taken!!!!\n"); die("NMI", regs); @@ -1682,6 +1692,8 @@ void __init trap_init(void) ebase += (read_c0_ebase() & 0x3ffff000); } + if (board_ebase_setup) + board_ebase_setup(); per_cpu_trap_init(); /* diff --git a/arch/mips/lantiq/clk.c b/arch/mips/lantiq/clk.c index 77ed70fc2fe..412814fdd3e 100644 --- a/arch/mips/lantiq/clk.c +++ b/arch/mips/lantiq/clk.c @@ -134,11 +134,11 @@ void __init plat_time_init(void) struct clk *clk; if (insert_resource(&iomem_resource, <q_cgu_resource) < 0) - panic("Failed to insert cgu memory\n"); + panic("Failed to insert cgu memory"); if (request_mem_region(ltq_cgu_resource.start, resource_size(<q_cgu_resource), "cgu") < 0) - panic("Failed to request cgu memory\n"); + panic("Failed to request cgu memory"); ltq_cgu_membase = ioremap_nocache(ltq_cgu_resource.start, resource_size(<q_cgu_resource)); diff --git a/arch/mips/lantiq/irq.c b/arch/mips/lantiq/irq.c index f9737bb3c5a..d673731c538 100644 --- a/arch/mips/lantiq/irq.c +++ b/arch/mips/lantiq/irq.c @@ -240,7 +240,6 @@ out: static struct irqaction cascade = { .handler = no_action, - .flags = IRQF_DISABLED, .name = "cascade", }; @@ -249,28 +248,28 @@ void __init arch_init_irq(void) int i; if (insert_resource(&iomem_resource, <q_icu_resource) < 0) - panic("Failed to insert icu memory\n"); + panic("Failed to insert icu memory"); if (request_mem_region(ltq_icu_resource.start, resource_size(<q_icu_resource), "icu") < 0) - panic("Failed to request icu memory\n"); + panic("Failed to request icu memory"); ltq_icu_membase = ioremap_nocache(ltq_icu_resource.start, resource_size(<q_icu_resource)); if (!ltq_icu_membase) - panic("Failed to remap icu memory\n"); + panic("Failed to remap icu memory"); if (insert_resource(&iomem_resource, <q_eiu_resource) < 0) - panic("Failed to insert eiu memory\n"); + panic("Failed to insert eiu memory"); if (request_mem_region(ltq_eiu_resource.start, resource_size(<q_eiu_resource), "eiu") < 0) - panic("Failed to request eiu memory\n"); + panic("Failed to request eiu memory"); ltq_eiu_membase = ioremap_nocache(ltq_eiu_resource.start, resource_size(<q_eiu_resource)); if (!ltq_eiu_membase) - panic("Failed to remap eiu memory\n"); + panic("Failed to remap eiu memory"); /* make sure all irqs are turned off by default */ for (i = 0; i < 5; i++) diff --git a/arch/mips/lantiq/xway/dma.c b/arch/mips/lantiq/xway/dma.c index cbb6ae5747b..b210e936c7c 100644 --- a/arch/mips/lantiq/xway/dma.c +++ b/arch/mips/lantiq/xway/dma.c @@ -222,17 +222,17 @@ ltq_dma_init(void) /* insert and request the memory region */ if (insert_resource(&iomem_resource, <q_dma_resource) < 0) - panic("Failed to insert dma memory\n"); + panic("Failed to insert dma memory"); if (request_mem_region(ltq_dma_resource.start, resource_size(<q_dma_resource), "dma") < 0) - panic("Failed to request dma memory\n"); + panic("Failed to request dma memory"); /* remap dma register range */ ltq_dma_membase = ioremap_nocache(ltq_dma_resource.start, resource_size(<q_dma_resource)); if (!ltq_dma_membase) - panic("Failed to remap dma memory\n"); + panic("Failed to remap dma memory"); /* power up and reset the dma engine */ ltq_pmu_enable(PMU_DMA); diff --git a/arch/mips/lantiq/xway/ebu.c b/arch/mips/lantiq/xway/ebu.c index 033b3184c7a..862e3e83068 100644 --- a/arch/mips/lantiq/xway/ebu.c +++ b/arch/mips/lantiq/xway/ebu.c @@ -32,17 +32,17 @@ static int __init lantiq_ebu_init(void) { /* insert and request the memory region */ if (insert_resource(&iomem_resource, <q_ebu_resource) < 0) - panic("Failed to insert ebu memory\n"); + panic("Failed to insert ebu memory"); if (request_mem_region(ltq_ebu_resource.start, resource_size(<q_ebu_resource), "ebu") < 0) - panic("Failed to request ebu memory\n"); + panic("Failed to request ebu memory"); /* remap ebu register range */ ltq_ebu_membase = ioremap_nocache(ltq_ebu_resource.start, resource_size(<q_ebu_resource)); if (!ltq_ebu_membase) - panic("Failed to remap ebu memory\n"); + panic("Failed to remap ebu memory"); /* make sure to unprotect the memory region where flash is located */ ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_BUSCON0) & ~EBU_WRDIS, LTQ_EBU_BUSCON0); diff --git a/arch/mips/lantiq/xway/pmu.c b/arch/mips/lantiq/xway/pmu.c index 39f0d2641cb..fe85361e032 100644 --- a/arch/mips/lantiq/xway/pmu.c +++ b/arch/mips/lantiq/xway/pmu.c @@ -40,7 +40,7 @@ void ltq_pmu_enable(unsigned int module) do {} while (--err && (ltq_pmu_r32(LTQ_PMU_PWDSR) & module)); if (!err) - panic("activating PMU module failed!\n"); + panic("activating PMU module failed!"); } EXPORT_SYMBOL(ltq_pmu_enable); @@ -53,16 +53,16 @@ EXPORT_SYMBOL(ltq_pmu_disable); int __init ltq_pmu_init(void) { if (insert_resource(&iomem_resource, <q_pmu_resource) < 0) - panic("Failed to insert pmu memory\n"); + panic("Failed to insert pmu memory"); if (request_mem_region(ltq_pmu_resource.start, resource_size(<q_pmu_resource), "pmu") < 0) - panic("Failed to request pmu memory\n"); + panic("Failed to request pmu memory"); ltq_pmu_membase = ioremap_nocache(ltq_pmu_resource.start, resource_size(<q_pmu_resource)); if (!ltq_pmu_membase) - panic("Failed to remap pmu memory\n"); + panic("Failed to remap pmu memory"); return 0; } diff --git a/arch/mips/lantiq/xway/reset.c b/arch/mips/lantiq/xway/reset.c index 3d41f0bb5bf..8b66bd87f0c 100644 --- a/arch/mips/lantiq/xway/reset.c +++ b/arch/mips/lantiq/xway/reset.c @@ -69,17 +69,17 @@ static int __init mips_reboot_setup(void) { /* insert and request the memory region */ if (insert_resource(&iomem_resource, <q_rcu_resource) < 0) - panic("Failed to insert rcu memory\n"); + panic("Failed to insert rcu memory"); if (request_mem_region(ltq_rcu_resource.start, resource_size(<q_rcu_resource), "rcu") < 0) - panic("Failed to request rcu memory\n"); + panic("Failed to request rcu memory"); /* remap rcu register range */ ltq_rcu_membase = ioremap_nocache(ltq_rcu_resource.start, resource_size(<q_rcu_resource)); if (!ltq_rcu_membase) - panic("Failed to remap rcu memory\n"); + panic("Failed to remap rcu memory"); _machine_restart = ltq_machine_restart; _machine_halt = ltq_machine_halt; diff --git a/arch/mips/lib/Makefile b/arch/mips/lib/Makefile index b2cad4fd5fc..2a7c74fc15f 100644 --- a/arch/mips/lib/Makefile +++ b/arch/mips/lib/Makefile @@ -29,6 +29,7 @@ obj-$(CONFIG_CPU_TX49XX) += dump_tlb.o obj-$(CONFIG_CPU_VR41XX) += dump_tlb.o obj-$(CONFIG_CPU_CAVIUM_OCTEON) += dump_tlb.o obj-$(CONFIG_CPU_XLR) += dump_tlb.o +obj-$(CONFIG_CPU_XLP) += dump_tlb.o # libgcc-style stuff needed in the kernel obj-y += ashldi3.o ashrdi3.o cmpdi2.o lshrdi3.o ucmpdi2.o diff --git a/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c b/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c index 0cb1b9760e3..5d1f48fa1a5 100644 --- a/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c +++ b/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c @@ -111,7 +111,7 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id) static struct irqaction irq5 = { .handler = timer_interrupt, - .flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_TIMER, + .flags = IRQF_NOBALANCING | IRQF_TIMER, .name = "timer" }; diff --git a/arch/mips/math-emu/cp1emu.c b/arch/mips/math-emu/cp1emu.c index dbf2f93a509..a03bf00a1a9 100644 --- a/arch/mips/math-emu/cp1emu.c +++ b/arch/mips/math-emu/cp1emu.c @@ -245,7 +245,7 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx, */ emulpc = xcp->cp0_epc + 4; /* Snapshot emulation target */ - if (__compute_return_epc(xcp)) { + if (__compute_return_epc(xcp) < 0) { #ifdef CP1DBG printk("failed to emulate branch at %p\n", (void *) (xcp->cp0_epc)); diff --git a/arch/mips/mm/Makefile b/arch/mips/mm/Makefile index 4d8c1623eee..4aa20280613 100644 --- a/arch/mips/mm/Makefile +++ b/arch/mips/mm/Makefile @@ -3,8 +3,8 @@ # obj-y += cache.o dma-default.o extable.o fault.o \ - init.o mmap.o tlbex.o tlbex-fault.o uasm.o \ - page.o + gup.o init.o mmap.o page.o tlbex.o \ + tlbex-fault.o uasm.o obj-$(CONFIG_32BIT) += ioremap.o pgtable-32.o obj-$(CONFIG_64BIT) += pgtable-64.o @@ -31,6 +31,7 @@ obj-$(CONFIG_CPU_TX49XX) += c-r4k.o cex-gen.o tlb-r4k.o obj-$(CONFIG_CPU_VR41XX) += c-r4k.o cex-gen.o tlb-r4k.o obj-$(CONFIG_CPU_CAVIUM_OCTEON) += c-octeon.o cex-oct.o tlb-r4k.o obj-$(CONFIG_CPU_XLR) += c-r4k.o tlb-r4k.o cex-gen.o +obj-$(CONFIG_CPU_XLP) += c-r4k.o tlb-r4k.o cex-gen.o obj-$(CONFIG_IP22_CPU_SCACHE) += sc-ip22.o obj-$(CONFIG_R5000_CPU_SCACHE) += sc-r5k.o diff --git a/arch/mips/mm/c-octeon.c b/arch/mips/mm/c-octeon.c index daa81f7284a..cf7895db073 100644 --- a/arch/mips/mm/c-octeon.c +++ b/arch/mips/mm/c-octeon.c @@ -223,7 +223,7 @@ static void __cpuinit probe_octeon(void) break; default: - panic("Unsupported Cavium Networks CPU type\n"); + panic("Unsupported Cavium Networks CPU type"); break; } diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index a79fe9aa772..4f9eb0b2303 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -1235,6 +1235,9 @@ static void __cpuinit setup_scache(void) loongson2_sc_init(); return; #endif + case CPU_XLP: + /* don't need to worry about L2, fully coherent */ + return; default: if (c->isa_level == MIPS_CPU_ISA_M32R1 || diff --git a/arch/mips/mm/gup.c b/arch/mips/mm/gup.c new file mode 100644 index 00000000000..33aadbcf170 --- /dev/null +++ b/arch/mips/mm/gup.c @@ -0,0 +1,315 @@ +/* + * Lockless get_user_pages_fast for MIPS + * + * Copyright (C) 2008 Nick Piggin + * Copyright (C) 2008 Novell Inc. + * Copyright (C) 2011 Ralf Baechle + */ +#include <linux/sched.h> +#include <linux/mm.h> +#include <linux/vmstat.h> +#include <linux/highmem.h> +#include <linux/swap.h> +#include <linux/hugetlb.h> + +#include <asm/pgtable.h> + +static inline pte_t gup_get_pte(pte_t *ptep) +{ +#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) + pte_t pte; + +retry: + pte.pte_low = ptep->pte_low; + smp_rmb(); + pte.pte_high = ptep->pte_high; + smp_rmb(); + if (unlikely(pte.pte_low != ptep->pte_low)) + goto retry; + + return pte; +#else + return ACCESS_ONCE(*ptep); +#endif +} + +static int gup_pte_range(pmd_t pmd, unsigned long addr, unsigned long end, + int write, struct page **pages, int *nr) +{ + pte_t *ptep = pte_offset_map(&pmd, addr); + do { + pte_t pte = gup_get_pte(ptep); + struct page *page; + + if (!pte_present(pte) || + pte_special(pte) || (write && !pte_write(pte))) { + pte_unmap(ptep); + return 0; + } + VM_BUG_ON(!pfn_valid(pte_pfn(pte))); + page = pte_page(pte); + get_page(page); + SetPageReferenced(page); + pages[*nr] = page; + (*nr)++; + + } while (ptep++, addr += PAGE_SIZE, addr != end); + + pte_unmap(ptep - 1); + return 1; +} + +static inline void get_head_page_multiple(struct page *page, int nr) +{ + VM_BUG_ON(page != compound_head(page)); + VM_BUG_ON(page_count(page) == 0); + atomic_add(nr, &page->_count); + SetPageReferenced(page); +} + +static int gup_huge_pmd(pmd_t pmd, unsigned long addr, unsigned long end, + int write, struct page **pages, int *nr) +{ + pte_t pte = *(pte_t *)&pmd; + struct page *head, *page; + int refs; + + if (write && !pte_write(pte)) + return 0; + /* hugepages are never "special" */ + VM_BUG_ON(pte_special(pte)); + VM_BUG_ON(!pfn_valid(pte_pfn(pte))); + + refs = 0; + head = pte_page(pte); + page = head + ((addr & ~PMD_MASK) >> PAGE_SHIFT); + do { + VM_BUG_ON(compound_head(page) != head); + pages[*nr] = page; + if (PageTail(page)) + get_huge_page_tail(page); + (*nr)++; + page++; + refs++; + } while (addr += PAGE_SIZE, addr != end); + + get_head_page_multiple(head, refs); + return 1; +} + +static int gup_pmd_range(pud_t pud, unsigned long addr, unsigned long end, + int write, struct page **pages, int *nr) +{ + unsigned long next; + pmd_t *pmdp; + + pmdp = pmd_offset(&pud, addr); + do { + pmd_t pmd = *pmdp; + + next = pmd_addr_end(addr, end); + /* + * The pmd_trans_splitting() check below explains why + * pmdp_splitting_flush has to flush the tlb, to stop + * this gup-fast code from running while we set the + * splitting bit in the pmd. Returning zero will take + * the slow path that will call wait_split_huge_page() + * if the pmd is still in splitting state. gup-fast + * can't because it has irq disabled and + * wait_split_huge_page() would never return as the + * tlb flush IPI wouldn't run. + */ + if (pmd_none(pmd) || pmd_trans_splitting(pmd)) + return 0; + if (unlikely(pmd_huge(pmd))) { + if (!gup_huge_pmd(pmd, addr, next, write, pages,nr)) + return 0; + } else { + if (!gup_pte_range(pmd, addr, next, write, pages,nr)) + return 0; + } + } while (pmdp++, addr = next, addr != end); + + return 1; +} + +static int gup_huge_pud(pud_t pud, unsigned long addr, unsigned long end, + int write, struct page **pages, int *nr) +{ + pte_t pte = *(pte_t *)&pud; + struct page *head, *page; + int refs; + + if (write && !pte_write(pte)) + return 0; + /* hugepages are never "special" */ + VM_BUG_ON(pte_special(pte)); + VM_BUG_ON(!pfn_valid(pte_pfn(pte))); + + refs = 0; + head = pte_page(pte); + page = head + ((addr & ~PUD_MASK) >> PAGE_SHIFT); + do { + VM_BUG_ON(compound_head(page) != head); + pages[*nr] = page; + (*nr)++; + page++; + refs++; + } while (addr += PAGE_SIZE, addr != end); + + get_head_page_multiple(head, refs); + return 1; +} + +static int gup_pud_range(pgd_t pgd, unsigned long addr, unsigned long end, + int write, struct page **pages, int *nr) +{ + unsigned long next; + pud_t *pudp; + + pudp = pud_offset(&pgd, addr); + do { + pud_t pud = *pudp; + + next = pud_addr_end(addr, end); + if (pud_none(pud)) + return 0; + if (unlikely(pud_huge(pud))) { + if (!gup_huge_pud(pud, addr, next, write, pages,nr)) + return 0; + } else { + if (!gup_pmd_range(pud, addr, next, write, pages,nr)) + return 0; + } + } while (pudp++, addr = next, addr != end); + + return 1; +} + +/* + * Like get_user_pages_fast() except its IRQ-safe in that it won't fall + * back to the regular GUP. + */ +int __get_user_pages_fast(unsigned long start, int nr_pages, int write, + struct page **pages) +{ + struct mm_struct *mm = current->mm; + unsigned long addr, len, end; + unsigned long next; + unsigned long flags; + pgd_t *pgdp; + int nr = 0; + + start &= PAGE_MASK; + addr = start; + len = (unsigned long) nr_pages << PAGE_SHIFT; + end = start + len; + if (unlikely(!access_ok(write ? VERIFY_WRITE : VERIFY_READ, + (void __user *)start, len))) + return 0; + + /* + * XXX: batch / limit 'nr', to avoid large irq off latency + * needs some instrumenting to determine the common sizes used by + * important workloads (eg. DB2), and whether limiting the batch + * size will decrease performance. + * + * It seems like we're in the clear for the moment. Direct-IO is + * the main guy that batches up lots of get_user_pages, and even + * they are limited to 64-at-a-time which is not so many. + */ + /* + * This doesn't prevent pagetable teardown, but does prevent + * the pagetables and pages from being freed. + * + * So long as we atomically load page table pointers versus teardown, + * we can follow the address down to the page and take a ref on it. + */ + local_irq_save(flags); + pgdp = pgd_offset(mm, addr); + do { + pgd_t pgd = *pgdp; + + next = pgd_addr_end(addr, end); + if (pgd_none(pgd)) + break; + if (!gup_pud_range(pgd, addr, next, write, pages, &nr)) + break; + } while (pgdp++, addr = next, addr != end); + local_irq_restore(flags); + + return nr; +} + +/** + * get_user_pages_fast() - pin user pages in memory + * @start: starting user address + * @nr_pages: number of pages from start to pin + * @write: whether pages will be written to + * @pages: array that receives pointers to the pages pinned. + * Should be at least nr_pages long. + * + * Attempt to pin user pages in memory without taking mm->mmap_sem. + * If not successful, it will fall back to taking the lock and + * calling get_user_pages(). + * + * Returns number of pages pinned. This may be fewer than the number + * requested. If nr_pages is 0 or negative, returns 0. If no pages + * were pinned, returns -errno. + */ +int get_user_pages_fast(unsigned long start, int nr_pages, int write, + struct page **pages) +{ + struct mm_struct *mm = current->mm; + unsigned long addr, len, end; + unsigned long next; + pgd_t *pgdp; + int ret, nr = 0; + + start &= PAGE_MASK; + addr = start; + len = (unsigned long) nr_pages << PAGE_SHIFT; + + end = start + len; + if (end < start) + goto slow_irqon; + + /* XXX: batch / limit 'nr' */ + local_irq_disable(); + pgdp = pgd_offset(mm, addr); + do { + pgd_t pgd = *pgdp; + + next = pgd_addr_end(addr, end); + if (pgd_none(pgd)) + goto slow; + if (!gup_pud_range(pgd, addr, next, write, pages, &nr)) + goto slow; + } while (pgdp++, addr = next, addr != end); + local_irq_enable(); + + VM_BUG_ON(nr != (end - start) >> PAGE_SHIFT); + return nr; +slow: + local_irq_enable(); + +slow_irqon: + /* Try to get the remaining pages with get_user_pages */ + start += nr << PAGE_SHIFT; + pages += nr; + + down_read(&mm->mmap_sem); + ret = get_user_pages(current, mm, start, + (end - start) >> PAGE_SHIFT, + write, 0, pages, NULL); + up_read(&mm->mmap_sem); + + /* Have to be a bit careful with return values */ + if (nr > 0) { + if (ret < 0) + ret = nr; + else + ret += nr; + } + return ret; +} diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c index b7ebc4fa89b..3b3ffd439cd 100644 --- a/arch/mips/mm/init.c +++ b/arch/mips/mm/init.c @@ -304,9 +304,14 @@ int page_is_ram(unsigned long pagenr) for (i = 0; i < boot_mem_map.nr_map; i++) { unsigned long addr, end; - if (boot_mem_map.map[i].type != BOOT_MEM_RAM) + switch (boot_mem_map.map[i].type) { + case BOOT_MEM_RAM: + case BOOT_MEM_INIT_RAM: + break; + default: /* not usable memory */ continue; + } addr = PFN_UP(boot_mem_map.map[i].addr); end = PFN_DOWN(boot_mem_map.map[i].addr + @@ -379,7 +384,7 @@ void __init mem_init(void) reservedpages = ram = 0; for (tmp = 0; tmp < max_low_pfn; tmp++) - if (page_is_ram(tmp)) { + if (page_is_ram(tmp) && pfn_valid(tmp)) { ram++; if (PageReserved(pfn_to_page(tmp))) reservedpages++; diff --git a/arch/mips/mm/tlb-r3k.c b/arch/mips/mm/tlb-r3k.c index 87bb85d8d53..ed1fa460f84 100644 --- a/arch/mips/mm/tlb-r3k.c +++ b/arch/mips/mm/tlb-r3k.c @@ -20,6 +20,7 @@ #include <asm/pgtable.h> #include <asm/mmu_context.h> #include <asm/system.h> +#include <asm/tlbmisc.h> #include <asm/isadep.h> #include <asm/io.h> #include <asm/bootinfo.h> diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c index 0d394e0e883..2dc625346c4 100644 --- a/arch/mips/mm/tlb-r4k.c +++ b/arch/mips/mm/tlb-r4k.c @@ -19,6 +19,7 @@ #include <asm/mmu_context.h> #include <asm/pgtable.h> #include <asm/system.h> +#include <asm/tlbmisc.h> extern void build_tlb_refill_handler(void); @@ -120,22 +121,30 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, if (cpu_context(cpu, mm) != 0) { unsigned long size, flags; + int huge = is_vm_hugetlb_page(vma); ENTER_CRITICAL(flags); - size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT; - size = (size + 1) >> 1; + if (huge) { + start = round_down(start, HPAGE_SIZE); + end = round_up(end, HPAGE_SIZE); + size = (end - start) >> HPAGE_SHIFT; + } else { + start = round_down(start, PAGE_SIZE << 1); + end = round_up(end, PAGE_SIZE << 1); + size = (end - start) >> (PAGE_SHIFT + 1); + } if (size <= current_cpu_data.tlbsize/2) { int oldpid = read_c0_entryhi(); int newpid = cpu_asid(cpu, mm); - start &= (PAGE_MASK << 1); - end += ((PAGE_SIZE << 1) - 1); - end &= (PAGE_MASK << 1); while (start < end) { int idx; write_c0_entryhi(start | newpid); - start += (PAGE_SIZE << 1); + if (huge) + start += HPAGE_SIZE; + else + start += (PAGE_SIZE << 1); mtc0_tlbw_hazard(); tlb_probe(); tlb_probe_hazard(); @@ -368,51 +377,6 @@ void add_wired_entry(unsigned long entrylo0, unsigned long entrylo1, EXIT_CRITICAL(flags); } -/* - * Used for loading TLB entries before trap_init() has started, when we - * don't actually want to add a wired entry which remains throughout the - * lifetime of the system - */ - -static int temp_tlb_entry __cpuinitdata; - -__init int add_temporary_entry(unsigned long entrylo0, unsigned long entrylo1, - unsigned long entryhi, unsigned long pagemask) -{ - int ret = 0; - unsigned long flags; - unsigned long wired; - unsigned long old_pagemask; - unsigned long old_ctx; - - ENTER_CRITICAL(flags); - /* Save old context and create impossible VPN2 value */ - old_ctx = read_c0_entryhi(); - old_pagemask = read_c0_pagemask(); - wired = read_c0_wired(); - if (--temp_tlb_entry < wired) { - printk(KERN_WARNING - "No TLB space left for add_temporary_entry\n"); - ret = -ENOSPC; - goto out; - } - - write_c0_index(temp_tlb_entry); - write_c0_pagemask(pagemask); - write_c0_entryhi(entryhi); - write_c0_entrylo0(entrylo0); - write_c0_entrylo1(entrylo1); - mtc0_tlbw_hazard(); - tlb_write_indexed(); - tlbw_use_hazard(); - - write_c0_entryhi(old_ctx); - write_c0_pagemask(old_pagemask); -out: - EXIT_CRITICAL(flags); - return ret; -} - static int __cpuinitdata ntlb; static int __init set_ntlb(char *str) { @@ -450,8 +414,6 @@ void __cpuinit tlb_init(void) write_c0_pagegrain(pg); } - temp_tlb_entry = current_cpu_data.tlbsize - 1; - /* From this point on the ARC firmware is dead. */ local_flush_tlb_all(); diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c index d53ff91b277..a588b5cef8d 100644 --- a/arch/mips/mti-malta/malta-int.c +++ b/arch/mips/mti-malta/malta-int.c @@ -322,13 +322,13 @@ static irqreturn_t ipi_call_interrupt(int irq, void *dev_id) static struct irqaction irq_resched = { .handler = ipi_resched_interrupt, - .flags = IRQF_DISABLED|IRQF_PERCPU, + .flags = IRQF_PERCPU, .name = "IPI_resched" }; static struct irqaction irq_call = { .handler = ipi_call_interrupt, - .flags = IRQF_DISABLED|IRQF_PERCPU, + .flags = IRQF_PERCPU, .name = "IPI_call" }; #endif /* CONFIG_MIPS_MT_SMP */ diff --git a/arch/mips/netlogic/Kconfig b/arch/mips/netlogic/Kconfig index a5ca743613f..75bec44b585 100644 --- a/arch/mips/netlogic/Kconfig +++ b/arch/mips/netlogic/Kconfig @@ -1,5 +1,2 @@ config NLM_COMMON bool - -config NLM_XLR - bool diff --git a/arch/mips/netlogic/Makefile b/arch/mips/netlogic/Makefile new file mode 100644 index 00000000000..36d169b2ca6 --- /dev/null +++ b/arch/mips/netlogic/Makefile @@ -0,0 +1,3 @@ +obj-$(CONFIG_NLM_COMMON) += common/ +obj-$(CONFIG_CPU_XLR) += xlr/ +obj-$(CONFIG_CPU_XLP) += xlp/ diff --git a/arch/mips/netlogic/Platform b/arch/mips/netlogic/Platform index b648b487fd6..cdfc9abbbb7 100644 --- a/arch/mips/netlogic/Platform +++ b/arch/mips/netlogic/Platform @@ -1,16 +1,17 @@ # # NETLOGIC includes # -cflags-$(CONFIG_NLM_COMMON) += -I$(srctree)/arch/mips/include/asm/mach-netlogic -cflags-$(CONFIG_NLM_COMMON) += -I$(srctree)/arch/mips/include/asm/netlogic +cflags-$(CONFIG_NLM_COMMON) += -I$(srctree)/arch/mips/include/asm/mach-netlogic +cflags-$(CONFIG_NLM_COMMON) += -I$(srctree)/arch/mips/include/asm/netlogic # # use mips64 if xlr is not available # -cflags-$(CONFIG_NLM_XLR) += $(call cc-option,-march=xlr,-march=mips64) +cflags-$(CONFIG_CPU_XLR) += $(call cc-option,-march=xlr,-march=mips64) +cflags-$(CONFIG_CPU_XLP) += $(call cc-option,-march=xlp,-march=mips64r2) # -# NETLOGIC XLR/XLS SoC, Simulator and boards +# NETLOGIC processor support # -core-$(CONFIG_NLM_XLR) += arch/mips/netlogic/xlr/ -load-$(CONFIG_NLM_XLR_BOARD) += 0xffffffff84000000 +platform-$(CONFIG_NLM_COMMON) += netlogic/ +load-$(CONFIG_NLM_COMMON) += 0xffffffff80100000 diff --git a/arch/mips/netlogic/common/Makefile b/arch/mips/netlogic/common/Makefile new file mode 100644 index 00000000000..291372a086f --- /dev/null +++ b/arch/mips/netlogic/common/Makefile @@ -0,0 +1,3 @@ +obj-y += irq.o time.o +obj-$(CONFIG_SMP) += smp.o smpboot.o +obj-$(CONFIG_EARLY_PRINTK) += earlycons.o diff --git a/arch/mips/netlogic/common/earlycons.c b/arch/mips/netlogic/common/earlycons.c new file mode 100644 index 00000000000..f193f7b3bd8 --- /dev/null +++ b/arch/mips/netlogic/common/earlycons.c @@ -0,0 +1,60 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <linux/types.h> +#include <linux/serial_reg.h> + +#include <asm/mipsregs.h> +#include <asm/netlogic/haldefs.h> + +#if defined(CONFIG_CPU_XLP) +#include <asm/netlogic/xlp-hal/iomap.h> +#include <asm/netlogic/xlp-hal/uart.h> +#elif defined(CONFIG_CPU_XLR) +#include <asm/netlogic/xlr/iomap.h> +#endif + +void prom_putchar(char c) +{ + uint64_t uartbase; + +#if defined(CONFIG_CPU_XLP) + uartbase = nlm_get_uart_regbase(0, 0); +#elif defined(CONFIG_CPU_XLR) + uartbase = nlm_mmio_base(NETLOGIC_IO_UART_0_OFFSET); +#endif + while (nlm_read_reg(uartbase, UART_LSR) == 0) + ; + nlm_write_reg(uartbase, UART_TX, c); +} diff --git a/arch/mips/netlogic/common/irq.c b/arch/mips/netlogic/common/irq.c new file mode 100644 index 00000000000..49a4f6cf71e --- /dev/null +++ b/arch/mips/netlogic/common/irq.c @@ -0,0 +1,238 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/linkage.h> +#include <linux/interrupt.h> +#include <linux/spinlock.h> +#include <linux/mm.h> +#include <linux/slab.h> +#include <linux/irq.h> + +#include <asm/errno.h> +#include <asm/signal.h> +#include <asm/system.h> +#include <asm/ptrace.h> +#include <asm/mipsregs.h> +#include <asm/thread_info.h> + +#include <asm/netlogic/mips-extns.h> +#include <asm/netlogic/interrupt.h> +#include <asm/netlogic/haldefs.h> +#include <asm/netlogic/common.h> + +#if defined(CONFIG_CPU_XLP) +#include <asm/netlogic/xlp-hal/iomap.h> +#include <asm/netlogic/xlp-hal/xlp.h> +#include <asm/netlogic/xlp-hal/pic.h> +#elif defined(CONFIG_CPU_XLR) +#include <asm/netlogic/xlr/iomap.h> +#include <asm/netlogic/xlr/pic.h> +#else +#error "Unknown CPU" +#endif +/* + * These are the routines that handle all the low level interrupt stuff. + * Actions handled here are: initialization of the interrupt map, requesting of + * interrupt lines by handlers, dispatching if interrupts to handlers, probing + * for interrupt lines + */ + +/* Globals */ +static uint64_t nlm_irq_mask; +static DEFINE_SPINLOCK(nlm_pic_lock); + +static void xlp_pic_enable(struct irq_data *d) +{ + unsigned long flags; + int irt; + + irt = nlm_irq_to_irt(d->irq); + if (irt == -1) + return; + spin_lock_irqsave(&nlm_pic_lock, flags); + nlm_pic_enable_irt(nlm_pic_base, irt); + spin_unlock_irqrestore(&nlm_pic_lock, flags); +} + +static void xlp_pic_disable(struct irq_data *d) +{ + unsigned long flags; + int irt; + + irt = nlm_irq_to_irt(d->irq); + if (irt == -1) + return; + spin_lock_irqsave(&nlm_pic_lock, flags); + nlm_pic_disable_irt(nlm_pic_base, irt); + spin_unlock_irqrestore(&nlm_pic_lock, flags); +} + +static void xlp_pic_mask_ack(struct irq_data *d) +{ + uint64_t mask = 1ull << d->irq; + + write_c0_eirr(mask); /* ack by writing EIRR */ +} + +static void xlp_pic_unmask(struct irq_data *d) +{ + void *hd = irq_data_get_irq_handler_data(d); + int irt; + + irt = nlm_irq_to_irt(d->irq); + if (irt == -1) + return; + + if (hd) { + void (*extra_ack)(void *) = hd; + extra_ack(d); + } + /* Ack is a single write, no need to lock */ + nlm_pic_ack(nlm_pic_base, irt); +} + +static struct irq_chip xlp_pic = { + .name = "XLP-PIC", + .irq_enable = xlp_pic_enable, + .irq_disable = xlp_pic_disable, + .irq_mask_ack = xlp_pic_mask_ack, + .irq_unmask = xlp_pic_unmask, +}; + +static void cpuintr_disable(struct irq_data *d) +{ + uint64_t eimr; + uint64_t mask = 1ull << d->irq; + + eimr = read_c0_eimr(); + write_c0_eimr(eimr & ~mask); +} + +static void cpuintr_enable(struct irq_data *d) +{ + uint64_t eimr; + uint64_t mask = 1ull << d->irq; + + eimr = read_c0_eimr(); + write_c0_eimr(eimr | mask); +} + +static void cpuintr_ack(struct irq_data *d) +{ + uint64_t mask = 1ull << d->irq; + + write_c0_eirr(mask); +} + +static void cpuintr_nop(struct irq_data *d) +{ + WARN(d->irq >= PIC_IRQ_BASE, "Bad irq %d", d->irq); +} + +/* + * Chip definition for CPU originated interrupts(timer, msg) and + * IPIs + */ +struct irq_chip nlm_cpu_intr = { + .name = "XLP-CPU-INTR", + .irq_enable = cpuintr_enable, + .irq_disable = cpuintr_disable, + .irq_mask = cpuintr_nop, + .irq_ack = cpuintr_nop, + .irq_eoi = cpuintr_ack, +}; + +void __init init_nlm_common_irqs(void) +{ + int i, irq, irt; + + for (i = 0; i < PIC_IRT_FIRST_IRQ; i++) + irq_set_chip_and_handler(i, &nlm_cpu_intr, handle_percpu_irq); + + for (i = PIC_IRT_FIRST_IRQ; i <= PIC_IRT_LAST_IRQ ; i++) + irq_set_chip_and_handler(i, &xlp_pic, handle_level_irq); + +#ifdef CONFIG_SMP + irq_set_chip_and_handler(IRQ_IPI_SMP_FUNCTION, &nlm_cpu_intr, + nlm_smp_function_ipi_handler); + irq_set_chip_and_handler(IRQ_IPI_SMP_RESCHEDULE, &nlm_cpu_intr, + nlm_smp_resched_ipi_handler); + nlm_irq_mask |= + ((1ULL << IRQ_IPI_SMP_FUNCTION) | (1ULL << IRQ_IPI_SMP_RESCHEDULE)); +#endif + + for (irq = PIC_IRT_FIRST_IRQ; irq <= PIC_IRT_LAST_IRQ; irq++) { + irt = nlm_irq_to_irt(irq); + if (irt == -1) + continue; + nlm_irq_mask |= (1ULL << irq); + nlm_pic_init_irt(nlm_pic_base, irt, irq, 0); + } + + nlm_irq_mask |= (1ULL << IRQ_TIMER); +} + +void __init arch_init_irq(void) +{ + /* Initialize the irq descriptors */ + init_nlm_common_irqs(); + + write_c0_eimr(nlm_irq_mask); +} + +void __cpuinit nlm_smp_irq_init(void) +{ + /* set interrupt mask for non-zero cpus */ + write_c0_eimr(nlm_irq_mask); +} + +asmlinkage void plat_irq_dispatch(void) +{ + uint64_t eirr; + int i; + + eirr = read_c0_eirr() & read_c0_eimr(); + if (eirr & (1 << IRQ_TIMER)) { + do_IRQ(IRQ_TIMER); + return; + } + + i = __ilog2_u64(eirr); + if (i == -1) + return; + + do_IRQ(i); +} diff --git a/arch/mips/netlogic/xlr/smp.c b/arch/mips/netlogic/common/smp.c index 080284ded50..db17f49886c 100644 --- a/arch/mips/netlogic/xlr/smp.c +++ b/arch/mips/netlogic/common/smp.c @@ -42,31 +42,29 @@ #include <asm/netlogic/interrupt.h> #include <asm/netlogic/mips-extns.h> - +#include <asm/netlogic/haldefs.h> +#include <asm/netlogic/common.h> + +#if defined(CONFIG_CPU_XLP) +#include <asm/netlogic/xlp-hal/iomap.h> +#include <asm/netlogic/xlp-hal/xlp.h> +#include <asm/netlogic/xlp-hal/pic.h> +#elif defined(CONFIG_CPU_XLR) #include <asm/netlogic/xlr/iomap.h> #include <asm/netlogic/xlr/pic.h> #include <asm/netlogic/xlr/xlr.h> +#else +#error "Unknown CPU" +#endif -void core_send_ipi(int logical_cpu, unsigned int action) +void nlm_send_ipi_single(int logical_cpu, unsigned int action) { int cpu = cpu_logical_map(logical_cpu); - u32 tid = cpu & 0x3; - u32 pid = (cpu >> 2) & 0x07; - u32 ipi = (tid << 16) | (pid << 20); if (action & SMP_CALL_FUNCTION) - ipi |= IRQ_IPI_SMP_FUNCTION; - else if (action & SMP_RESCHEDULE_YOURSELF) - ipi |= IRQ_IPI_SMP_RESCHEDULE; - else - return; - - pic_send_ipi(ipi); -} - -void nlm_send_ipi_single(int cpu, unsigned int action) -{ - core_send_ipi(cpu, action); + nlm_pic_send_ipi(nlm_pic_base, cpu, IRQ_IPI_SMP_FUNCTION, 0); + if (action & SMP_RESCHEDULE_YOURSELF) + nlm_pic_send_ipi(nlm_pic_base, cpu, IRQ_IPI_SMP_RESCHEDULE, 0); } void nlm_send_ipi_mask(const struct cpumask *mask, unsigned int action) @@ -74,29 +72,35 @@ void nlm_send_ipi_mask(const struct cpumask *mask, unsigned int action) int cpu; for_each_cpu(cpu, mask) { - core_send_ipi(cpu, action); + nlm_send_ipi_single(cpu, action); } } /* IRQ_IPI_SMP_FUNCTION Handler */ void nlm_smp_function_ipi_handler(unsigned int irq, struct irq_desc *desc) { + write_c0_eirr(1ull << irq); smp_call_function_interrupt(); } /* IRQ_IPI_SMP_RESCHEDULE handler */ void nlm_smp_resched_ipi_handler(unsigned int irq, struct irq_desc *desc) { + write_c0_eirr(1ull << irq); scheduler_ipi(); } /* * Called before going into mips code, early cpu init */ -void nlm_early_init_secondary(void) +void nlm_early_init_secondary(int cpu) { + change_c0_config(CONF_CM_CMASK, 0x3); write_c0_ebase((uint32_t)nlm_common_ebase); - /* TLB partition here later */ +#ifdef CONFIG_CPU_XLP + if (hard_smp_processor_id() % 4 == 0) + xlp_mmu_init(); +#endif } /* @@ -104,9 +108,16 @@ void nlm_early_init_secondary(void) */ static void __cpuinit nlm_init_secondary(void) { + current_cpu_data.core = hard_smp_processor_id() / 4; nlm_smp_irq_init(); } +void nlm_prepare_cpus(unsigned int max_cpus) +{ + /* declare we are SMT capable */ + smp_num_siblings = nlm_threads_per_core; +} + void nlm_smp_finish(void) { #ifdef notyet @@ -123,10 +134,10 @@ void nlm_cpus_done(void) * Boot all other cpus in the system, initialize them, and bring them into * the boot function */ -int nlm_cpu_unblock[NR_CPUS]; int nlm_cpu_ready[NR_CPUS]; unsigned long nlm_next_gp; unsigned long nlm_next_sp; + cpumask_t phys_cpu_present_map; void nlm_boot_secondary(int logical_cpu, struct task_struct *idle) @@ -140,7 +151,7 @@ void nlm_boot_secondary(int logical_cpu, struct task_struct *idle) /* barrier */ __sync(); - nlm_cpu_unblock[cpu] = 1; + nlm_pic_send_ipi(nlm_pic_base, cpu, 1, 1); } void __init nlm_smp_setup(void) @@ -159,8 +170,8 @@ void __init nlm_smp_setup(void) num_cpus = 1; for (i = 0; i < NR_CPUS; i++) { /* - * BSP is not set in nlm_cpu_ready array, it is only for - * ASPs (goto see smpboot.S) + * nlm_cpu_ready array is not set for the boot_cpu, + * it is only set for ASPs (see smpboot.S) */ if (nlm_cpu_ready[i]) { cpu_set(i, phys_cpu_present_map); @@ -176,10 +187,75 @@ void __init nlm_smp_setup(void) (unsigned long)cpu_possible_map.bits[0]); pr_info("Detected %i Slave CPU(s)\n", num_cpus); + nlm_set_nmi_handler(nlm_boot_secondary_cpus); } -void nlm_prepare_cpus(unsigned int max_cpus) +static int nlm_parse_cpumask(u32 cpu_mask) +{ + uint32_t core0_thr_mask, core_thr_mask; + int threadmode, i; + + core0_thr_mask = cpu_mask & 0xf; + switch (core0_thr_mask) { + case 1: + nlm_threads_per_core = 1; + threadmode = 0; + break; + case 3: + nlm_threads_per_core = 2; + threadmode = 2; + break; + case 0xf: + nlm_threads_per_core = 4; + threadmode = 3; + break; + default: + goto unsupp; + } + + /* Verify other cores CPU masks */ + nlm_coremask = 1; + nlm_cpumask = core0_thr_mask; + for (i = 1; i < 8; i++) { + core_thr_mask = (cpu_mask >> (i * 4)) & 0xf; + if (core_thr_mask) { + if (core_thr_mask != core0_thr_mask) + goto unsupp; + nlm_coremask |= 1 << i; + nlm_cpumask |= core0_thr_mask << (4 * i); + } + } + return threadmode; + +unsupp: + panic("Unsupported CPU mask %x\n", cpu_mask); + return 0; +} + +int __cpuinit nlm_wakeup_secondary_cpus(u32 wakeup_mask) { + unsigned long reset_vec; + char *reset_data; + int threadmode; + + /* Update reset entry point with CPU init code */ + reset_vec = CKSEG1ADDR(RESET_VEC_PHYS); + memcpy((void *)reset_vec, (void *)nlm_reset_entry, + (nlm_reset_entry_end - nlm_reset_entry)); + + /* verify the mask and setup core config variables */ + threadmode = nlm_parse_cpumask(wakeup_mask); + + /* Setup CPU init parameters */ + reset_data = (char *)CKSEG1ADDR(RESET_DATA_PHYS); + *(int *)(reset_data + BOOT_THREAD_MODE) = threadmode; + +#ifdef CONFIG_CPU_XLP + xlp_wakeup_secondary_cpus(); +#else + xlr_wakeup_secondary_cpus(); +#endif + return 0; } struct plat_smp_ops nlm_smp_ops = { @@ -192,29 +268,3 @@ struct plat_smp_ops nlm_smp_ops = { .smp_setup = nlm_smp_setup, .prepare_cpus = nlm_prepare_cpus, }; - -unsigned long secondary_entry_point; - -int __cpuinit nlm_wakeup_secondary_cpus(u32 wakeup_mask) -{ - unsigned int tid, pid, ipi, i, boot_cpu; - void *reset_vec; - - secondary_entry_point = (unsigned long)prom_pre_boot_secondary_cpus; - reset_vec = (void *)CKSEG1ADDR(0x1fc00000); - memcpy(reset_vec, nlm_boot_smp_nmi, 0x80); - boot_cpu = hard_smp_processor_id(); - - for (i = 0; i < NR_CPUS; i++) { - if (i == boot_cpu) - continue; - if (wakeup_mask & (1u << i)) { - tid = i & 0x3; - pid = (i >> 2) & 0x7; - ipi = (tid << 16) | (pid << 20) | (1 << 8); - pic_send_ipi(ipi); - } - } - - return 0; -} diff --git a/arch/mips/netlogic/common/smpboot.S b/arch/mips/netlogic/common/smpboot.S new file mode 100644 index 00000000000..c138b1a6dec --- /dev/null +++ b/arch/mips/netlogic/common/smpboot.S @@ -0,0 +1,272 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <linux/init.h> + +#include <asm/asm.h> +#include <asm/asm-offsets.h> +#include <asm/regdef.h> +#include <asm/mipsregs.h> +#include <asm/stackframe.h> +#include <asm/asmmacro.h> +#include <asm/addrspace.h> + +#include <asm/netlogic/common.h> + +#include <asm/netlogic/xlp-hal/iomap.h> +#include <asm/netlogic/xlp-hal/xlp.h> +#include <asm/netlogic/xlp-hal/sys.h> +#include <asm/netlogic/xlp-hal/cpucontrol.h> + +#define CP0_EBASE $15 +#define SYS_CPU_COHERENT_BASE(node) CKSEG1ADDR(XLP_DEFAULT_IO_BASE) + \ + XLP_IO_SYS_OFFSET(node) + XLP_IO_PCI_HDRSZ + \ + SYS_CPU_NONCOHERENT_MODE * 4 + +.macro __config_lsu + li t0, LSU_DEFEATURE + mfcr t1, t0 + + lui t2, 0x4080 /* Enable Unaligned Access, L2HPE */ + or t1, t1, t2 + li t2, ~0xe /* S1RCM */ + and t1, t1, t2 + mtcr t1, t0 + + li t0, SCHED_DEFEATURE + lui t1, 0x0100 /* Experimental: Disable BRU accepting ALU ops */ + mtcr t1, t0 +.endm + +/* + * The cores can come start when they are woken up. This is also the NMI + * entry, so check that first. + * + * The data corresponding to reset is stored at RESET_DATA_PHYS location, + * this will have the thread mask (used when core is woken up) and the + * current NMI handler in case we reached here for an NMI. + * + * When a core or thread is newly woken up, it loops in a 'wait'. When + * the CPU really needs waking up, we send an NMI to it, with the NMI + * handler set to prom_boot_secondary_cpus + */ + + .set noreorder + .set noat + .set arch=xlr /* for mfcr/mtcr, XLR is sufficient */ + +FEXPORT(nlm_reset_entry) + dmtc0 k0, $22, 6 + dmtc0 k1, $22, 7 + mfc0 k0, CP0_STATUS + li k1, 0x80000 + and k1, k0, k1 + beqz k1, 1f /* go to real reset entry */ + nop + li k1, CKSEG1ADDR(RESET_DATA_PHYS) /* NMI */ + ld k0, BOOT_NMI_HANDLER(k1) + jr k0 + nop + +1: /* Entry point on core wakeup */ + mfc0 t0, CP0_EBASE, 1 + mfc0 t1, CP0_EBASE, 1 + srl t1, 5 + andi t1, 0x3 /* t1 <- node */ + li t2, 0x40000 + mul t3, t2, t1 /* t3 = node * 0x40000 */ + srl t0, t0, 2 + and t0, t0, 0x7 /* t0 <- core */ + li t1, 0x1 + sll t0, t1, t0 + nor t0, t0, zero /* t0 <- ~(1 << core) */ + li t2, SYS_CPU_COHERENT_BASE(0) + add t2, t2, t3 /* t2 <- SYS offset for node */ + lw t1, 0(t2) + and t1, t1, t0 + sw t1, 0(t2) + + /* read back to ensure complete */ + lw t1, 0(t2) + sync + + /* Configure LSU on Non-0 Cores. */ + __config_lsu + +/* + * Wake up sibling threads from the initial thread in + * a core. + */ +EXPORT(nlm_boot_siblings) + li t0, CKSEG1ADDR(RESET_DATA_PHYS) + lw t1, BOOT_THREAD_MODE(t0) /* t1 <- thread mode */ + li t0, ((CPU_BLOCKID_MAP << 8) | MAP_THREADMODE) + mfcr t2, t0 + or t2, t2, t1 + mtcr t2, t0 + + /* + * The new hardware thread starts at the next instruction + * For all the cases other than core 0 thread 0, we will + * jump to the secondary wait function. + */ + mfc0 v0, CP0_EBASE, 1 + andi v0, 0x7f /* v0 <- node/core */ + +#if 1 + /* A0 errata - Write MMU_SETUP after changing thread mode register. */ + andi v1, v0, 0x3 /* v1 <- thread id */ + bnez v1, 2f + nop + + li t0, MMU_SETUP + li t1, 0 + mtcr t1, t0 + ehb +#endif + +2: beqz v0, 4f + nop + + /* setup status reg */ + mfc0 t1, CP0_STATUS + li t0, ST0_BEV + or t1, t0 + xor t1, t0 +#ifdef CONFIG_64BIT + ori t1, ST0_KX +#endif + mtc0 t1, CP0_STATUS + /* mark CPU ready */ + PTR_LA t1, nlm_cpu_ready + sll v1, v0, 2 + PTR_ADDU t1, v1 + li t2, 1 + sw t2, 0(t1) + /* Wait until NMI hits */ +3: wait + j 3b + nop + + /* + * For the boot CPU, we have to restore registers and + * return + */ +4: dmfc0 t0, $4, 2 /* restore SP from UserLocal */ + li t1, 0xfadebeef + dmtc0 t1, $4, 2 /* restore SP from UserLocal */ + PTR_SUBU sp, t0, PT_SIZE + RESTORE_ALL + jr ra + nop +EXPORT(nlm_reset_entry_end) + +FEXPORT(xlp_boot_core0_siblings) /* "Master" cpu starts from here */ + __config_lsu + dmtc0 sp, $4, 2 /* SP saved in UserLocal */ + SAVE_ALL + sync + /* find the location to which nlm_boot_siblings was relocated */ + li t0, CKSEG1ADDR(RESET_VEC_PHYS) + dla t1, nlm_reset_entry + dla t2, nlm_boot_siblings + dsubu t2, t1 + daddu t2, t0 + /* call it */ + jr t2 + nop + /* not reached */ + + __CPUINIT +NESTED(nlm_boot_secondary_cpus, 16, sp) + PTR_LA t1, nlm_next_sp + PTR_L sp, 0(t1) + PTR_LA t1, nlm_next_gp + PTR_L gp, 0(t1) + + /* a0 has the processor id */ + PTR_LA t0, nlm_early_init_secondary + jalr t0 + nop + + PTR_LA t0, smp_bootstrap + jr t0 + nop +END(nlm_boot_secondary_cpus) + __FINIT + +/* + * In case of RMIboot bootloader which is used on XLR boards, the CPUs + * be already woken up and waiting in bootloader code. + * This will get them out of the bootloader code and into linux. Needed + * because the bootloader area will be taken and initialized by linux. + */ + __CPUINIT +NESTED(nlm_rmiboot_preboot, 16, sp) + mfc0 t0, $15, 1 # read ebase + andi t0, 0x1f # t0 has the processor_id() + andi t2, t0, 0x3 # thread no + sll t0, 2 # offset in cpu array + + PTR_LA t1, nlm_cpu_ready # mark CPU ready + PTR_ADDU t1, t0 + li t3, 1 + sw t3, 0(t1) + + bnez t2, 1f # skip thread programming + nop # for non zero hw threads + + /* + * MMU setup only for first thread in core + */ + li t0, 0x400 + mfcr t1, t0 + li t2, 6 # XLR thread mode mask + nor t3, t2, zero + and t2, t1, t2 # t2 - current thread mode + li v0, CKSEG1ADDR(RESET_DATA_PHYS) + lw v1, BOOT_THREAD_MODE(v0) # v1 - new thread mode + sll v1, 1 + beq v1, t2, 1f # same as request value + nop # nothing to do */ + + and t2, t1, t3 # mask out old thread mode + or t1, t2, v1 # put in new value + mtcr t1, t0 # update core control + +1: wait + j 1b + nop +END(nlm_rmiboot_preboot) + __FINIT diff --git a/arch/mips/netlogic/xlr/time.c b/arch/mips/netlogic/common/time.c index 0d81b262593..bd3e498157f 100644 --- a/arch/mips/netlogic/xlr/time.c +++ b/arch/mips/netlogic/common/time.c @@ -36,7 +36,7 @@ #include <asm/time.h> #include <asm/netlogic/interrupt.h> -#include <asm/netlogic/psb-bootinfo.h> +#include <asm/netlogic/common.h> unsigned int __cpuinit get_c0_compare_int(void) { @@ -45,7 +45,7 @@ unsigned int __cpuinit get_c0_compare_int(void) void __init plat_time_init(void) { - mips_hpt_frequency = nlm_prom_info.cpu_frequency; + mips_hpt_frequency = nlm_get_cpu_frequency(); pr_info("MIPS counter frequency [%ld]\n", - (unsigned long)mips_hpt_frequency); + (unsigned long)mips_hpt_frequency); } diff --git a/arch/mips/netlogic/xlp/Makefile b/arch/mips/netlogic/xlp/Makefile new file mode 100644 index 00000000000..b93ed83474e --- /dev/null +++ b/arch/mips/netlogic/xlp/Makefile @@ -0,0 +1,2 @@ +obj-y += setup.o platform.o nlm_hal.o +obj-$(CONFIG_SMP) += wakeup.o diff --git a/arch/mips/netlogic/xlp/nlm_hal.c b/arch/mips/netlogic/xlp/nlm_hal.c new file mode 100644 index 00000000000..9428e7125fe --- /dev/null +++ b/arch/mips/netlogic/xlp/nlm_hal.c @@ -0,0 +1,111 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/delay.h> + +#include <asm/mipsregs.h> +#include <asm/time.h> + +#include <asm/netlogic/haldefs.h> +#include <asm/netlogic/xlp-hal/iomap.h> +#include <asm/netlogic/xlp-hal/xlp.h> +#include <asm/netlogic/xlp-hal/pic.h> +#include <asm/netlogic/xlp-hal/sys.h> + +/* These addresses are computed by the nlm_hal_init() */ +uint64_t nlm_io_base; +uint64_t nlm_sys_base; +uint64_t nlm_pic_base; + +/* Main initialization */ +void nlm_hal_init(void) +{ + nlm_io_base = CKSEG1ADDR(XLP_DEFAULT_IO_BASE); + nlm_sys_base = nlm_get_sys_regbase(0); /* node 0 */ + nlm_pic_base = nlm_get_pic_regbase(0); /* node 0 */ +} + +int nlm_irq_to_irt(int irq) +{ + if (!PIC_IRQ_IS_IRT(irq)) + return -1; + + switch (irq) { + case PIC_UART_0_IRQ: + return PIC_IRT_UART_0_INDEX; + case PIC_UART_1_IRQ: + return PIC_IRT_UART_1_INDEX; + default: + return -1; + } +} + +int nlm_irt_to_irq(int irt) +{ + switch (irt) { + case PIC_IRT_UART_0_INDEX: + return PIC_UART_0_IRQ; + case PIC_IRT_UART_1_INDEX: + return PIC_UART_1_IRQ; + default: + return -1; + } +} + +unsigned int nlm_get_core_frequency(int core) +{ + unsigned int pll_divf, pll_divr, dfs_div, ext_div; + unsigned int rstval, dfsval, denom; + uint64_t num; + + rstval = nlm_read_sys_reg(nlm_sys_base, SYS_POWER_ON_RESET_CFG); + dfsval = nlm_read_sys_reg(nlm_sys_base, SYS_CORE_DFS_DIV_VALUE); + pll_divf = ((rstval >> 10) & 0x7f) + 1; + pll_divr = ((rstval >> 8) & 0x3) + 1; + ext_div = ((rstval >> 30) & 0x3) + 1; + dfs_div = ((dfsval >> (core * 4)) & 0xf) + 1; + + num = 800000000ULL * pll_divf; + denom = 3 * pll_divr * ext_div * dfs_div; + do_div(num, denom); + return (unsigned int)num; +} + +unsigned int nlm_get_cpu_frequency(void) +{ + return nlm_get_core_frequency(0); +} diff --git a/arch/mips/netlogic/xlp/platform.c b/arch/mips/netlogic/xlp/platform.c new file mode 100644 index 00000000000..1f5e4cba891 --- /dev/null +++ b/arch/mips/netlogic/xlp/platform.c @@ -0,0 +1,108 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <linux/dma-mapping.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/serial.h> +#include <linux/serial_8250.h> +#include <linux/pci.h> +#include <linux/serial_reg.h> +#include <linux/spinlock.h> + +#include <asm/time.h> +#include <asm/addrspace.h> +#include <asm/netlogic/haldefs.h> +#include <asm/netlogic/xlp-hal/iomap.h> +#include <asm/netlogic/xlp-hal/xlp.h> +#include <asm/netlogic/xlp-hal/pic.h> +#include <asm/netlogic/xlp-hal/uart.h> + +static unsigned int nlm_xlp_uart_in(struct uart_port *p, int offset) +{ + return nlm_read_reg(p->iobase, offset); +} + +static void nlm_xlp_uart_out(struct uart_port *p, int offset, int value) +{ + nlm_write_reg(p->iobase, offset, value); +} + +#define PORT(_irq) \ + { \ + .irq = _irq, \ + .regshift = 2, \ + .iotype = UPIO_MEM32, \ + .flags = (UPF_SKIP_TEST|UPF_FIXED_TYPE|\ + UPF_BOOT_AUTOCONF), \ + .uartclk = XLP_IO_CLK, \ + .type = PORT_16550A, \ + .serial_in = nlm_xlp_uart_in, \ + .serial_out = nlm_xlp_uart_out, \ + } + +static struct plat_serial8250_port xlp_uart_data[] = { + PORT(PIC_UART_0_IRQ), + PORT(PIC_UART_1_IRQ), + {}, +}; + +static struct platform_device uart_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = xlp_uart_data, + }, +}; + +static int __init nlm_platform_uart_init(void) +{ + unsigned long mmio; + + mmio = (unsigned long)nlm_get_uart_regbase(0, 0); + xlp_uart_data[0].iobase = mmio; + xlp_uart_data[0].membase = (void __iomem *)mmio; + xlp_uart_data[0].mapbase = mmio; + + mmio = (unsigned long)nlm_get_uart_regbase(0, 1); + xlp_uart_data[1].iobase = mmio; + xlp_uart_data[1].membase = (void __iomem *)mmio; + xlp_uart_data[1].mapbase = mmio; + + return platform_device_register(&uart_device); +} + +arch_initcall(nlm_platform_uart_init); diff --git a/arch/mips/netlogic/xlp/setup.c b/arch/mips/netlogic/xlp/setup.c new file mode 100644 index 00000000000..acb677a1227 --- /dev/null +++ b/arch/mips/netlogic/xlp/setup.c @@ -0,0 +1,105 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <linux/kernel.h> +#include <linux/serial_8250.h> +#include <linux/pm.h> + +#include <asm/reboot.h> +#include <asm/time.h> +#include <asm/bootinfo.h> + +#include <linux/of_fdt.h> + +#include <asm/netlogic/haldefs.h> +#include <asm/netlogic/common.h> + +#include <asm/netlogic/xlp-hal/iomap.h> +#include <asm/netlogic/xlp-hal/xlp.h> +#include <asm/netlogic/xlp-hal/sys.h> + +unsigned long nlm_common_ebase = 0x0; + +/* default to uniprocessor */ +uint32_t nlm_coremask = 1, nlm_cpumask = 1; +int nlm_threads_per_core = 1; + +static void nlm_linux_exit(void) +{ + nlm_write_sys_reg(nlm_sys_base, SYS_CHIP_RESET, 1); + for ( ; ; ) + cpu_wait(); +} + +void __init plat_mem_setup(void) +{ + panic_timeout = 5; + _machine_restart = (void (*)(char *))nlm_linux_exit; + _machine_halt = nlm_linux_exit; + pm_power_off = nlm_linux_exit; +} + +const char *get_system_type(void) +{ + return "Netlogic XLP Series"; +} + +void __init prom_free_prom_memory(void) +{ + /* Nothing yet */ +} + +void xlp_mmu_init(void) +{ + write_c0_config6(read_c0_config6() | 0x24); + current_cpu_data.tlbsize = ((read_c0_config6() >> 16) & 0xffff) + 1; + write_c0_config7(PM_DEFAULT_MASK >> + (13 + (ffz(PM_DEFAULT_MASK >> 13) / 2))); +} + +void __init prom_init(void) +{ + void *fdtp; + + fdtp = (void *)(long)fw_arg0; + xlp_mmu_init(); + nlm_hal_init(); + early_init_devtree(fdtp); + + nlm_common_ebase = read_c0_ebase() & (~((1 << 12) - 1)); +#ifdef CONFIG_SMP + nlm_wakeup_secondary_cpus(0xffffffff); + register_smp_ops(&nlm_smp_ops); +#endif +} diff --git a/arch/mips/netlogic/xlp/wakeup.c b/arch/mips/netlogic/xlp/wakeup.c new file mode 100644 index 00000000000..44d923ff384 --- /dev/null +++ b/arch/mips/netlogic/xlp/wakeup.c @@ -0,0 +1,102 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/threads.h> + +#include <asm/asm.h> +#include <asm/asm-offsets.h> +#include <asm/mipsregs.h> +#include <asm/addrspace.h> +#include <asm/string.h> + +#include <asm/netlogic/haldefs.h> +#include <asm/netlogic/common.h> +#include <asm/netlogic/mips-extns.h> + +#include <asm/netlogic/xlp-hal/iomap.h> +#include <asm/netlogic/xlp-hal/pic.h> +#include <asm/netlogic/xlp-hal/xlp.h> +#include <asm/netlogic/xlp-hal/sys.h> + +static void xlp_enable_secondary_cores(void) +{ + uint32_t core, value, coremask, syscoremask; + int count; + + /* read cores in reset from SYS block */ + syscoremask = nlm_read_sys_reg(nlm_sys_base, SYS_CPU_RESET); + + /* update user specified */ + nlm_coremask = nlm_coremask & (syscoremask | 1); + + for (core = 1; core < 8; core++) { + coremask = 1 << core; + if ((nlm_coremask & coremask) == 0) + continue; + + /* Enable CPU clock */ + value = nlm_read_sys_reg(nlm_sys_base, SYS_CORE_DFS_DIS_CTRL); + value &= ~coremask; + nlm_write_sys_reg(nlm_sys_base, SYS_CORE_DFS_DIS_CTRL, value); + + /* Remove CPU Reset */ + value = nlm_read_sys_reg(nlm_sys_base, SYS_CPU_RESET); + value &= ~coremask; + nlm_write_sys_reg(nlm_sys_base, SYS_CPU_RESET, value); + + /* Poll for CPU to mark itself coherent */ + count = 100000; + do { + value = nlm_read_sys_reg(nlm_sys_base, + SYS_CPU_NONCOHERENT_MODE); + } while ((value & coremask) != 0 && count-- > 0); + + if (count == 0) + pr_err("Failed to enable core %d\n", core); + } +} + +void xlp_wakeup_secondary_cpus(void) +{ + /* + * In case of u-boot, the secondaries are in reset + * first wakeup core 0 threads + */ + xlp_boot_core0_siblings(); + + /* now get other cores out of reset */ + xlp_enable_secondary_cores(); +} diff --git a/arch/mips/netlogic/xlr/Makefile b/arch/mips/netlogic/xlr/Makefile index 2dca585dd2f..f01e4d7a060 100644 --- a/arch/mips/netlogic/xlr/Makefile +++ b/arch/mips/netlogic/xlr/Makefile @@ -1,5 +1,2 @@ -obj-y += setup.o platform.o irq.o setup.o time.o -obj-$(CONFIG_SMP) += smp.o smpboot.o -obj-$(CONFIG_EARLY_PRINTK) += xlr_console.o - -ccflags-y += -Werror +obj-y += setup.o platform.o +obj-$(CONFIG_SMP) += wakeup.o diff --git a/arch/mips/netlogic/xlr/irq.c b/arch/mips/netlogic/xlr/irq.c deleted file mode 100644 index 521bb7377eb..00000000000 --- a/arch/mips/netlogic/xlr/irq.c +++ /dev/null @@ -1,300 +0,0 @@ -/* - * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights - * reserved. - * - * This software is available to you under a choice of one of two - * licenses. You may choose to be licensed under the terms of the GNU - * General Public License (GPL) Version 2, available from the file - * COPYING in the main directory of this source tree, or the NetLogic - * license below: - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * - * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR - * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, - * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE - * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN - * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/linkage.h> -#include <linux/interrupt.h> -#include <linux/spinlock.h> -#include <linux/mm.h> - -#include <asm/mipsregs.h> - -#include <asm/netlogic/xlr/iomap.h> -#include <asm/netlogic/xlr/pic.h> -#include <asm/netlogic/xlr/xlr.h> - -#include <asm/netlogic/interrupt.h> -#include <asm/netlogic/mips-extns.h> - -static u64 nlm_irq_mask; -static DEFINE_SPINLOCK(nlm_pic_lock); - -static void xlr_pic_enable(struct irq_data *d) -{ - nlm_reg_t *mmio = netlogic_io_mmio(NETLOGIC_IO_PIC_OFFSET); - unsigned long flags; - nlm_reg_t reg; - int irq = d->irq; - - WARN(!PIC_IRQ_IS_IRT(irq), "Bad irq %d", irq); - - spin_lock_irqsave(&nlm_pic_lock, flags); - reg = netlogic_read_reg(mmio, PIC_IRT_1_BASE + irq - PIC_IRQ_BASE); - netlogic_write_reg(mmio, PIC_IRT_1_BASE + irq - PIC_IRQ_BASE, - reg | (1 << 6) | (1 << 30) | (1 << 31)); - spin_unlock_irqrestore(&nlm_pic_lock, flags); -} - -static void xlr_pic_mask(struct irq_data *d) -{ - nlm_reg_t *mmio = netlogic_io_mmio(NETLOGIC_IO_PIC_OFFSET); - unsigned long flags; - nlm_reg_t reg; - int irq = d->irq; - - WARN(!PIC_IRQ_IS_IRT(irq), "Bad irq %d", irq); - - spin_lock_irqsave(&nlm_pic_lock, flags); - reg = netlogic_read_reg(mmio, PIC_IRT_1_BASE + irq - PIC_IRQ_BASE); - netlogic_write_reg(mmio, PIC_IRT_1_BASE + irq - PIC_IRQ_BASE, - reg | (1 << 6) | (1 << 30) | (0 << 31)); - spin_unlock_irqrestore(&nlm_pic_lock, flags); -} - -#ifdef CONFIG_PCI -/* Extra ACK needed for XLR on chip PCI controller */ -static void xlr_pci_ack(struct irq_data *d) -{ - nlm_reg_t *pci_mmio = netlogic_io_mmio(NETLOGIC_IO_PCIX_OFFSET); - - netlogic_read_reg(pci_mmio, (0x140 >> 2)); -} - -/* Extra ACK needed for XLS on chip PCIe controller */ -static void xls_pcie_ack(struct irq_data *d) -{ - nlm_reg_t *pcie_mmio_le = netlogic_io_mmio(NETLOGIC_IO_PCIE_1_OFFSET); - - switch (d->irq) { - case PIC_PCIE_LINK0_IRQ: - netlogic_write_reg(pcie_mmio_le, (0x90 >> 2), 0xffffffff); - break; - case PIC_PCIE_LINK1_IRQ: - netlogic_write_reg(pcie_mmio_le, (0x94 >> 2), 0xffffffff); - break; - case PIC_PCIE_LINK2_IRQ: - netlogic_write_reg(pcie_mmio_le, (0x190 >> 2), 0xffffffff); - break; - case PIC_PCIE_LINK3_IRQ: - netlogic_write_reg(pcie_mmio_le, (0x194 >> 2), 0xffffffff); - break; - } -} - -/* For XLS B silicon, the 3,4 PCI interrupts are different */ -static void xls_pcie_ack_b(struct irq_data *d) -{ - nlm_reg_t *pcie_mmio_le = netlogic_io_mmio(NETLOGIC_IO_PCIE_1_OFFSET); - - switch (d->irq) { - case PIC_PCIE_LINK0_IRQ: - netlogic_write_reg(pcie_mmio_le, (0x90 >> 2), 0xffffffff); - break; - case PIC_PCIE_LINK1_IRQ: - netlogic_write_reg(pcie_mmio_le, (0x94 >> 2), 0xffffffff); - break; - case PIC_PCIE_XLSB0_LINK2_IRQ: - netlogic_write_reg(pcie_mmio_le, (0x190 >> 2), 0xffffffff); - break; - case PIC_PCIE_XLSB0_LINK3_IRQ: - netlogic_write_reg(pcie_mmio_le, (0x194 >> 2), 0xffffffff); - break; - } -} -#endif - -static void xlr_pic_ack(struct irq_data *d) -{ - unsigned long flags; - nlm_reg_t *mmio; - int irq = d->irq; - void *hd = irq_data_get_irq_handler_data(d); - - WARN(!PIC_IRQ_IS_IRT(irq), "Bad irq %d", irq); - - if (hd) { - void (*extra_ack)(void *) = hd; - extra_ack(d); - } - mmio = netlogic_io_mmio(NETLOGIC_IO_PIC_OFFSET); - spin_lock_irqsave(&nlm_pic_lock, flags); - netlogic_write_reg(mmio, PIC_INT_ACK, (1 << (irq - PIC_IRQ_BASE))); - spin_unlock_irqrestore(&nlm_pic_lock, flags); -} - -/* - * This chip definition handles interrupts routed thru the XLR - * hardware PIC, currently IRQs 8-39 are mapped to hardware intr - * 0-31 wired the XLR PIC - */ -static struct irq_chip xlr_pic = { - .name = "XLR-PIC", - .irq_enable = xlr_pic_enable, - .irq_mask = xlr_pic_mask, - .irq_ack = xlr_pic_ack, -}; - -static void rsvd_irq_handler(struct irq_data *d) -{ - WARN(d->irq >= PIC_IRQ_BASE, "Bad irq %d", d->irq); -} - -/* - * Chip definition for CPU originated interrupts(timer, msg) and - * IPIs - */ -struct irq_chip nlm_cpu_intr = { - .name = "XLR-CPU-INTR", - .irq_enable = rsvd_irq_handler, - .irq_mask = rsvd_irq_handler, - .irq_ack = rsvd_irq_handler, -}; - -void __init init_xlr_irqs(void) -{ - nlm_reg_t *mmio = netlogic_io_mmio(NETLOGIC_IO_PIC_OFFSET); - uint32_t thread_mask = 1; - int level, i; - - pr_info("Interrupt thread mask [%x]\n", thread_mask); - for (i = 0; i < PIC_NUM_IRTS; i++) { - level = PIC_IRQ_IS_EDGE_TRIGGERED(i); - - /* Bind all PIC irqs to boot cpu */ - netlogic_write_reg(mmio, PIC_IRT_0_BASE + i, thread_mask); - - /* - * Use local scheduling and high polarity for all IRTs - * Invalidate all IRTs, by default - */ - netlogic_write_reg(mmio, PIC_IRT_1_BASE + i, - (level << 30) | (1 << 6) | (PIC_IRQ_BASE + i)); - } - - /* Make all IRQs as level triggered by default */ - for (i = 0; i < NR_IRQS; i++) { - if (PIC_IRQ_IS_IRT(i)) - irq_set_chip_and_handler(i, &xlr_pic, handle_level_irq); - else - irq_set_chip_and_handler(i, &nlm_cpu_intr, - handle_percpu_irq); - } -#ifdef CONFIG_SMP - irq_set_chip_and_handler(IRQ_IPI_SMP_FUNCTION, &nlm_cpu_intr, - nlm_smp_function_ipi_handler); - irq_set_chip_and_handler(IRQ_IPI_SMP_RESCHEDULE, &nlm_cpu_intr, - nlm_smp_resched_ipi_handler); - nlm_irq_mask |= - ((1ULL << IRQ_IPI_SMP_FUNCTION) | (1ULL << IRQ_IPI_SMP_RESCHEDULE)); -#endif - -#ifdef CONFIG_PCI - /* - * For PCI interrupts, we need to ack the PIC controller too, overload - * irq handler data to do this - */ - if (nlm_chip_is_xls()) { - if (nlm_chip_is_xls_b()) { - irq_set_handler_data(PIC_PCIE_LINK0_IRQ, - xls_pcie_ack_b); - irq_set_handler_data(PIC_PCIE_LINK1_IRQ, - xls_pcie_ack_b); - irq_set_handler_data(PIC_PCIE_XLSB0_LINK2_IRQ, - xls_pcie_ack_b); - irq_set_handler_data(PIC_PCIE_XLSB0_LINK3_IRQ, - xls_pcie_ack_b); - } else { - irq_set_handler_data(PIC_PCIE_LINK0_IRQ, xls_pcie_ack); - irq_set_handler_data(PIC_PCIE_LINK1_IRQ, xls_pcie_ack); - irq_set_handler_data(PIC_PCIE_LINK2_IRQ, xls_pcie_ack); - irq_set_handler_data(PIC_PCIE_LINK3_IRQ, xls_pcie_ack); - } - } else { - /* XLR PCI controller ACK */ - irq_set_handler_data(PIC_PCIE_XLSB0_LINK3_IRQ, xlr_pci_ack); - } -#endif - /* unmask all PIC related interrupts. If no handler is installed by the - * drivers, it'll just ack the interrupt and return - */ - for (i = PIC_IRT_FIRST_IRQ; i <= PIC_IRT_LAST_IRQ; i++) - nlm_irq_mask |= (1ULL << i); - - nlm_irq_mask |= (1ULL << IRQ_TIMER); -} - -void __init arch_init_irq(void) -{ - /* Initialize the irq descriptors */ - init_xlr_irqs(); - write_c0_eimr(nlm_irq_mask); -} - -void __cpuinit nlm_smp_irq_init(void) -{ - /* set interrupt mask for non-zero cpus */ - write_c0_eimr(nlm_irq_mask); -} - -asmlinkage void plat_irq_dispatch(void) -{ - uint64_t eirr; - int i; - - eirr = read_c0_eirr() & read_c0_eimr(); - if (!eirr) - return; - - /* no need of EIRR here, writing compare clears interrupt */ - if (eirr & (1 << IRQ_TIMER)) { - do_IRQ(IRQ_TIMER); - return; - } - - /* use dcltz: optimize below code */ - for (i = 63; i != -1; i--) { - if (eirr & (1ULL << i)) - break; - } - if (i == -1) { - pr_err("no interrupt !!\n"); - return; - } - - /* Ack eirr */ - write_c0_eirr(1ULL << i); - - do_IRQ(i); -} diff --git a/arch/mips/netlogic/xlr/platform.c b/arch/mips/netlogic/xlr/platform.c index 609ec253464..eab64b45dff 100644 --- a/arch/mips/netlogic/xlr/platform.c +++ b/arch/mips/netlogic/xlr/platform.c @@ -15,18 +15,19 @@ #include <linux/serial_8250.h> #include <linux/serial_reg.h> +#include <asm/netlogic/haldefs.h> #include <asm/netlogic/xlr/iomap.h> #include <asm/netlogic/xlr/pic.h> #include <asm/netlogic/xlr/xlr.h> unsigned int nlm_xlr_uart_in(struct uart_port *p, int offset) { - nlm_reg_t *mmio; + uint64_t uartbase; unsigned int value; - /* XLR uart does not need any mapping of regs */ - mmio = (nlm_reg_t *)(p->membase + (offset << p->regshift)); - value = netlogic_read_reg(mmio, 0); + /* sign extend to 64 bits, if needed */ + uartbase = (uint64_t)(long)p->membase; + value = nlm_read_reg(uartbase, offset); /* See XLR/XLS errata */ if (offset == UART_MSR) @@ -39,10 +40,10 @@ unsigned int nlm_xlr_uart_in(struct uart_port *p, int offset) void nlm_xlr_uart_out(struct uart_port *p, int offset, int value) { - nlm_reg_t *mmio; + uint64_t uartbase; - /* XLR uart does not need any mapping of regs */ - mmio = (nlm_reg_t *)(p->membase + (offset << p->regshift)); + /* sign extend to 64 bits, if needed */ + uartbase = (uint64_t)(long)p->membase; /* See XLR/XLS errata */ if (offset == UART_MSR) @@ -50,7 +51,7 @@ void nlm_xlr_uart_out(struct uart_port *p, int offset, int value) else if (offset == UART_MCR) value ^= 0x3; - netlogic_write_reg(mmio, 0, value); + nlm_write_reg(uartbase, offset, value); } #define PORT(_irq) \ @@ -82,15 +83,15 @@ static struct platform_device uart_device = { static int __init nlm_uart_init(void) { - nlm_reg_t *mmio; + unsigned long uartbase; - mmio = netlogic_io_mmio(NETLOGIC_IO_UART_0_OFFSET); - xlr_uart_data[0].membase = (void __iomem *)mmio; - xlr_uart_data[0].mapbase = CPHYSADDR((unsigned long)mmio); + uartbase = (unsigned long)nlm_mmio_base(NETLOGIC_IO_UART_0_OFFSET); + xlr_uart_data[0].membase = (void __iomem *)uartbase; + xlr_uart_data[0].mapbase = CPHYSADDR(uartbase); - mmio = netlogic_io_mmio(NETLOGIC_IO_UART_1_OFFSET); - xlr_uart_data[1].membase = (void __iomem *)mmio; - xlr_uart_data[1].mapbase = CPHYSADDR((unsigned long)mmio); + uartbase = (unsigned long)nlm_mmio_base(NETLOGIC_IO_UART_1_OFFSET); + xlr_uart_data[1].membase = (void __iomem *)uartbase; + xlr_uart_data[1].mapbase = CPHYSADDR(uartbase); return platform_device_register(&uart_device); } diff --git a/arch/mips/netlogic/xlr/setup.c b/arch/mips/netlogic/xlr/setup.c index cee25ddd088..c9d066dedc4 100644 --- a/arch/mips/netlogic/xlr/setup.c +++ b/arch/mips/netlogic/xlr/setup.c @@ -39,26 +39,33 @@ #include <asm/reboot.h> #include <asm/time.h> #include <asm/bootinfo.h> -#include <asm/smp-ops.h> #include <asm/netlogic/interrupt.h> #include <asm/netlogic/psb-bootinfo.h> +#include <asm/netlogic/haldefs.h> +#include <asm/netlogic/common.h> #include <asm/netlogic/xlr/xlr.h> #include <asm/netlogic/xlr/iomap.h> #include <asm/netlogic/xlr/pic.h> #include <asm/netlogic/xlr/gpio.h> -unsigned long netlogic_io_base = (unsigned long)(DEFAULT_NETLOGIC_IO_BASE); -unsigned long nlm_common_ebase = 0x0; +uint64_t nlm_io_base = DEFAULT_NETLOGIC_IO_BASE; +uint64_t nlm_pic_base; struct psb_info nlm_prom_info; +unsigned long nlm_common_ebase = 0x0; + +/* default to uniprocessor */ +uint32_t nlm_coremask = 1, nlm_cpumask = 1; +int nlm_threads_per_core = 1; + static void __init nlm_early_serial_setup(void) { struct uart_port s; - nlm_reg_t *uart_base; + unsigned long uart_base; - uart_base = netlogic_io_mmio(NETLOGIC_IO_UART_0_OFFSET); + uart_base = (unsigned long)nlm_mmio_base(NETLOGIC_IO_UART_0_OFFSET); memset(&s, 0, sizeof(s)); s.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST; s.iotype = UPIO_MEM32; @@ -67,18 +74,18 @@ static void __init nlm_early_serial_setup(void) s.uartclk = PIC_CLKS_PER_SEC; s.serial_in = nlm_xlr_uart_in; s.serial_out = nlm_xlr_uart_out; - s.mapbase = (unsigned long)uart_base; + s.mapbase = uart_base; s.membase = (unsigned char __iomem *)uart_base; early_serial_setup(&s); } static void nlm_linux_exit(void) { - nlm_reg_t *mmio; + uint64_t gpiobase; - mmio = netlogic_io_mmio(NETLOGIC_IO_GPIO_OFFSET); + gpiobase = nlm_mmio_base(NETLOGIC_IO_GPIO_OFFSET); /* trigger a chip reset by writing 1 to GPIO_SWRESET_REG */ - netlogic_write_reg(mmio, NETLOGIC_GPIO_SWRESET_REG, 1); + nlm_write_reg(gpiobase, NETLOGIC_GPIO_SWRESET_REG, 1); for ( ; ; ) cpu_wait(); } @@ -96,6 +103,11 @@ const char *get_system_type(void) return "Netlogic XLR/XLS Series"; } +unsigned int nlm_get_cpu_frequency(void) +{ + return (unsigned int)nlm_prom_info.cpu_frequency; +} + void __init prom_free_prom_memory(void) { /* Nothing yet */ @@ -175,6 +187,7 @@ void __init prom_init(void) prom_infop = (struct psb_info *)(long)(int)fw_arg3; nlm_prom_info = *prom_infop; + nlm_pic_base = nlm_mmio_base(NETLOGIC_IO_PIC_OFFSET); nlm_early_serial_setup(); build_arcs_cmdline(argv); diff --git a/arch/mips/netlogic/xlr/smpboot.S b/arch/mips/netlogic/xlr/wakeup.c index 8cb7889ce0c..db5d987d488 100644 --- a/arch/mips/netlogic/xlr/smpboot.S +++ b/arch/mips/netlogic/xlr/wakeup.c @@ -33,68 +33,36 @@ */ #include <linux/init.h> +#include <linux/threads.h> #include <asm/asm.h> #include <asm/asm-offsets.h> -#include <asm/regdef.h> #include <asm/mipsregs.h> +#include <asm/addrspace.h> +#include <asm/string.h> -/* - * Early code for secondary CPUs. This will get them out of the bootloader - * code and into linux. Needed because the bootloader area will be taken - * and initialized by linux. - */ - __CPUINIT -NESTED(prom_pre_boot_secondary_cpus, 16, sp) - .set mips64 - mfc0 t0, $15, 1 # read ebase - andi t0, 0x1f # t0 has the processor_id() - sll t0, 2 # offset in cpu array - - PTR_LA t1, nlm_cpu_ready # mark CPU ready - PTR_ADDU t1, t0 - li t2, 1 - sw t2, 0(t1) - - PTR_LA t1, nlm_cpu_unblock - PTR_ADDU t1, t0 -1: lw t2, 0(t1) # wait till unblocked - beqz t2, 1b - nop +#include <asm/netlogic/haldefs.h> +#include <asm/netlogic/common.h> +#include <asm/netlogic/mips-extns.h> - PTR_LA t1, nlm_next_sp - PTR_L sp, 0(t1) - PTR_LA t1, nlm_next_gp - PTR_L gp, 0(t1) +#include <asm/netlogic/xlr/iomap.h> +#include <asm/netlogic/xlr/pic.h> - PTR_LA t0, nlm_early_init_secondary - jalr t0 - nop - - PTR_LA t0, smp_bootstrap - jr t0 - nop -END(prom_pre_boot_secondary_cpus) - __FINIT - -/* - * NMI code, used for CPU wakeup, copied to reset entry - */ -NESTED(nlm_boot_smp_nmi, 0, sp) - .set push - .set noat - .set mips64 - .set noreorder +int __cpuinit xlr_wakeup_secondary_cpus(void) +{ + unsigned int i, boot_cpu; - /* Clear the NMI and BEV bits */ - MFC0 k0, CP0_STATUS - li k1, 0xffb7ffff - and k0, k0, k1 - MTC0 k0, CP0_STATUS + /* + * In case of RMI boot, hit with NMI to get the cores + * from bootloader to linux code. + */ + boot_cpu = hard_smp_processor_id(); + nlm_set_nmi_handler(nlm_rmiboot_preboot); + for (i = 0; i < NR_CPUS; i++) { + if (i == boot_cpu || (nlm_cpumask & (1u << i)) == 0) + continue; + nlm_pic_send_ipi(nlm_pic_base, i, 1, 1); /* send NMI */ + } - PTR_LA k1, secondary_entry_point - PTR_L k0, 0(k1) - jr k0 - nop - .set pop -END(nlm_boot_smp_nmi) + return 0; +} diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index bb82cbdbc62..c3ac4b086eb 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -19,6 +19,7 @@ obj-$(CONFIG_BCM47XX) += pci-bcm47xx.o obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o fixup-bcm63xx.o \ ops-bcm63xx.o obj-$(CONFIG_MIPS_ALCHEMY) += pci-alchemy.o +obj-$(CONFIG_SOC_AR724X) += pci-ath724x.o # # These are still pretty much in the old state, watch, go blind. @@ -55,7 +56,7 @@ obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o obj-$(CONFIG_MIKROTIK_RB532) += pci-rc32434.o ops-rc32434.o fixup-rc32434.o obj-$(CONFIG_CPU_CAVIUM_OCTEON) += pci-octeon.o pcie-octeon.o -obj-$(CONFIG_NLM_XLR) += pci-xlr.o +obj-$(CONFIG_CPU_XLR) += pci-xlr.o ifdef CONFIG_PCI_MSI obj-$(CONFIG_CPU_CAVIUM_OCTEON) += msi-octeon.o diff --git a/arch/mips/pci/msi-octeon.c b/arch/mips/pci/msi-octeon.c index 5d530f89d87..d37be36dc65 100644 --- a/arch/mips/pci/msi-octeon.c +++ b/arch/mips/pci/msi-octeon.c @@ -162,7 +162,7 @@ msi_irq_allocated: msg.address_hi = (0 + CVMX_NPEI_PCIE_MSI_RCV) >> 32; break; default: - panic("arch_setup_msi_irq: Invalid octeon_dma_bar_type\n"); + panic("arch_setup_msi_irq: Invalid octeon_dma_bar_type"); } msg.data = irq - OCTEON_IRQ_MSI_BIT0; diff --git a/arch/mips/pci/ops-pmcmsp.c b/arch/mips/pci/ops-pmcmsp.c index 8fbfbf2b931..389bf669d56 100644 --- a/arch/mips/pci/ops-pmcmsp.c +++ b/arch/mips/pci/ops-pmcmsp.c @@ -405,7 +405,7 @@ int msp_pcibios_config_access(unsigned char access_type, if (pciirqflag == 0) { ret = request_irq(MSP_INT_PCI,/* Hardcoded internal MSP7120 wiring */ bpci_interrupt, - IRQF_SHARED | IRQF_DISABLED, + IRQF_SHARED, "PMC MSP PCI Host", preg); if (ret != 0) diff --git a/arch/mips/pci/ops-tx3927.c b/arch/mips/pci/ops-tx3927.c index 6a3bdb5ffa8..02d64f77e96 100644 --- a/arch/mips/pci/ops-tx3927.c +++ b/arch/mips/pci/ops-tx3927.c @@ -225,7 +225,7 @@ void __init tx3927_setup_pcierr_irq(void) { if (request_irq(TXX9_IRQ_BASE + TX3927_IR_PCI, tx3927_pcierr_interrupt, - IRQF_DISABLED, "PCI error", + 0, "PCI error", (void *)TX3927_PCIC_REG)) printk(KERN_WARNING "Failed to request irq for PCIERR\n"); } diff --git a/arch/mips/pci/pci-alchemy.c b/arch/mips/pci/pci-alchemy.c index b5ce041cdaf..ec125bed721 100644 --- a/arch/mips/pci/pci-alchemy.c +++ b/arch/mips/pci/pci-alchemy.c @@ -13,9 +13,11 @@ #include <linux/platform_device.h> #include <linux/kernel.h> #include <linux/init.h> +#include <linux/syscore_ops.h> #include <linux/vmalloc.h> #include <asm/mach-au1x00/au1000.h> +#include <asm/tlbmisc.h> #ifdef CONFIG_DEBUG_PCI #define DBG(x...) printk(KERN_DEBUG x) @@ -41,6 +43,12 @@ struct alchemy_pci_context { int (*board_pci_idsel)(unsigned int devsel, int assert); }; +/* for syscore_ops. There's only one PCI controller on Alchemy chips, so this + * should suffice for now. + */ +static struct alchemy_pci_context *__alchemy_pci_ctx; + + /* IO/MEM resources for PCI. Keep the memres in sync with __fixup_bigphys_addr * in arch/mips/alchemy/common/setup.c */ @@ -99,18 +107,6 @@ static int config_access(unsigned char access_type, struct pci_bus *bus, return -1; } - /* YAMON on all db1xxx boards wipes the TLB and writes zero to C0_wired - * on resume, clearing our wired entry. Unfortunately the ->resume() - * callback is called way way way too late (and ->suspend() too early) - * to have them destroy and recreate it. Instead just test if c0_wired - * is now lower than the index we retrieved before suspending and then - * recreate the entry if necessary. Of course this is totally bonkers - * and breaks as soon as someone else adds another wired entry somewhere - * else. Anyone have any ideas how to handle this better? - */ - if (unlikely(read_c0_wired() < ctx->wired_entry)) - alchemy_pci_wired_entry(ctx); - local_irq_save(flags); r = __raw_readl(ctx->regs + PCI_REG_STATCMD) & 0x0000ffff; r |= PCI_STATCMD_STATUS(0x2000); @@ -304,6 +300,62 @@ static int alchemy_pci_def_idsel(unsigned int devsel, int assert) return 1; /* success */ } +/* save PCI controller register contents. */ +static int alchemy_pci_suspend(void) +{ + struct alchemy_pci_context *ctx = __alchemy_pci_ctx; + if (!ctx) + return 0; + + ctx->pm[0] = __raw_readl(ctx->regs + PCI_REG_CMEM); + ctx->pm[1] = __raw_readl(ctx->regs + PCI_REG_CONFIG) & 0x0009ffff; + ctx->pm[2] = __raw_readl(ctx->regs + PCI_REG_B2BMASK_CCH); + ctx->pm[3] = __raw_readl(ctx->regs + PCI_REG_B2BBASE0_VID); + ctx->pm[4] = __raw_readl(ctx->regs + PCI_REG_B2BBASE1_SID); + ctx->pm[5] = __raw_readl(ctx->regs + PCI_REG_MWMASK_DEV); + ctx->pm[6] = __raw_readl(ctx->regs + PCI_REG_MWBASE_REV_CCL); + ctx->pm[7] = __raw_readl(ctx->regs + PCI_REG_ID); + ctx->pm[8] = __raw_readl(ctx->regs + PCI_REG_CLASSREV); + ctx->pm[9] = __raw_readl(ctx->regs + PCI_REG_PARAM); + ctx->pm[10] = __raw_readl(ctx->regs + PCI_REG_MBAR); + ctx->pm[11] = __raw_readl(ctx->regs + PCI_REG_TIMEOUT); + + return 0; +} + +static void alchemy_pci_resume(void) +{ + struct alchemy_pci_context *ctx = __alchemy_pci_ctx; + if (!ctx) + return; + + __raw_writel(ctx->pm[0], ctx->regs + PCI_REG_CMEM); + __raw_writel(ctx->pm[2], ctx->regs + PCI_REG_B2BMASK_CCH); + __raw_writel(ctx->pm[3], ctx->regs + PCI_REG_B2BBASE0_VID); + __raw_writel(ctx->pm[4], ctx->regs + PCI_REG_B2BBASE1_SID); + __raw_writel(ctx->pm[5], ctx->regs + PCI_REG_MWMASK_DEV); + __raw_writel(ctx->pm[6], ctx->regs + PCI_REG_MWBASE_REV_CCL); + __raw_writel(ctx->pm[7], ctx->regs + PCI_REG_ID); + __raw_writel(ctx->pm[8], ctx->regs + PCI_REG_CLASSREV); + __raw_writel(ctx->pm[9], ctx->regs + PCI_REG_PARAM); + __raw_writel(ctx->pm[10], ctx->regs + PCI_REG_MBAR); + __raw_writel(ctx->pm[11], ctx->regs + PCI_REG_TIMEOUT); + wmb(); + __raw_writel(ctx->pm[1], ctx->regs + PCI_REG_CONFIG); + wmb(); + + /* YAMON on all db1xxx boards wipes the TLB and writes zero to C0_wired + * on resume, making it necessary to recreate it as soon as possible. + */ + ctx->wired_entry = 8191; /* impossibly high value */ + alchemy_pci_wired_entry(ctx); /* install it */ +} + +static struct syscore_ops alchemy_pci_pmops = { + .suspend = alchemy_pci_suspend, + .resume = alchemy_pci_resume, +}; + static int __devinit alchemy_pci_probe(struct platform_device *pdev) { struct alchemy_pci_platdata *pd = pdev->dev.platform_data; @@ -396,7 +448,8 @@ static int __devinit alchemy_pci_probe(struct platform_device *pdev) ret = -ENOMEM; goto out4; } - ctx->wired_entry = 8192; /* impossibly high value */ + ctx->wired_entry = 8191; /* impossibly high value */ + alchemy_pci_wired_entry(ctx); /* install it */ set_io_port_base((unsigned long)ctx->alchemy_pci_ctrl.io_map_base); @@ -408,7 +461,9 @@ static int __devinit alchemy_pci_probe(struct platform_device *pdev) __raw_writel(val, ctx->regs + PCI_REG_CONFIG); wmb(); + __alchemy_pci_ctx = ctx; platform_set_drvdata(pdev, ctx); + register_syscore_ops(&alchemy_pci_pmops); register_pci_controller(&ctx->alchemy_pci_ctrl); return 0; @@ -425,68 +480,11 @@ out: return ret; } - -#ifdef CONFIG_PM -/* save PCI controller register contents. */ -static int alchemy_pci_suspend(struct device *dev) -{ - struct alchemy_pci_context *ctx = dev_get_drvdata(dev); - - ctx->pm[0] = __raw_readl(ctx->regs + PCI_REG_CMEM); - ctx->pm[1] = __raw_readl(ctx->regs + PCI_REG_CONFIG) & 0x0009ffff; - ctx->pm[2] = __raw_readl(ctx->regs + PCI_REG_B2BMASK_CCH); - ctx->pm[3] = __raw_readl(ctx->regs + PCI_REG_B2BBASE0_VID); - ctx->pm[4] = __raw_readl(ctx->regs + PCI_REG_B2BBASE1_SID); - ctx->pm[5] = __raw_readl(ctx->regs + PCI_REG_MWMASK_DEV); - ctx->pm[6] = __raw_readl(ctx->regs + PCI_REG_MWBASE_REV_CCL); - ctx->pm[7] = __raw_readl(ctx->regs + PCI_REG_ID); - ctx->pm[8] = __raw_readl(ctx->regs + PCI_REG_CLASSREV); - ctx->pm[9] = __raw_readl(ctx->regs + PCI_REG_PARAM); - ctx->pm[10] = __raw_readl(ctx->regs + PCI_REG_MBAR); - ctx->pm[11] = __raw_readl(ctx->regs + PCI_REG_TIMEOUT); - - return 0; -} - -static int alchemy_pci_resume(struct device *dev) -{ - struct alchemy_pci_context *ctx = dev_get_drvdata(dev); - - __raw_writel(ctx->pm[0], ctx->regs + PCI_REG_CMEM); - __raw_writel(ctx->pm[2], ctx->regs + PCI_REG_B2BMASK_CCH); - __raw_writel(ctx->pm[3], ctx->regs + PCI_REG_B2BBASE0_VID); - __raw_writel(ctx->pm[4], ctx->regs + PCI_REG_B2BBASE1_SID); - __raw_writel(ctx->pm[5], ctx->regs + PCI_REG_MWMASK_DEV); - __raw_writel(ctx->pm[6], ctx->regs + PCI_REG_MWBASE_REV_CCL); - __raw_writel(ctx->pm[7], ctx->regs + PCI_REG_ID); - __raw_writel(ctx->pm[8], ctx->regs + PCI_REG_CLASSREV); - __raw_writel(ctx->pm[9], ctx->regs + PCI_REG_PARAM); - __raw_writel(ctx->pm[10], ctx->regs + PCI_REG_MBAR); - __raw_writel(ctx->pm[11], ctx->regs + PCI_REG_TIMEOUT); - wmb(); - __raw_writel(ctx->pm[1], ctx->regs + PCI_REG_CONFIG); - wmb(); - - return 0; -} - -static const struct dev_pm_ops alchemy_pci_pmops = { - .suspend = alchemy_pci_suspend, - .resume = alchemy_pci_resume, -}; - -#define ALCHEMY_PCICTL_PM (&alchemy_pci_pmops) - -#else -#define ALCHEMY_PCICTL_PM NULL -#endif - static struct platform_driver alchemy_pcictl_driver = { .probe = alchemy_pci_probe, .driver = { .name = "alchemy-pci", .owner = THIS_MODULE, - .pm = ALCHEMY_PCICTL_PM, }, }; diff --git a/arch/mips/pci/pci-ath724x.c b/arch/mips/pci/pci-ath724x.c new file mode 100644 index 00000000000..a4dd24a4130 --- /dev/null +++ b/arch/mips/pci/pci-ath724x.c @@ -0,0 +1,174 @@ +/* + * Atheros 724x PCI support + * + * Copyright (C) 2011 RenĂ© Bolldorf <xsecute@googlemail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/pci.h> +#include <asm/mach-ath79/pci-ath724x.h> + +#define reg_read(_phys) (*(unsigned int *) KSEG1ADDR(_phys)) +#define reg_write(_phys, _val) ((*(unsigned int *) KSEG1ADDR(_phys)) = (_val)) + +#define ATH724X_PCI_DEV_BASE 0x14000000 +#define ATH724X_PCI_MEM_BASE 0x10000000 +#define ATH724X_PCI_MEM_SIZE 0x08000000 + +static DEFINE_SPINLOCK(ath724x_pci_lock); +static struct ath724x_pci_data *pci_data; +static int pci_data_size; + +static int ath724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where, + int size, uint32_t *value) +{ + unsigned long flags, addr, tval, mask; + + if (devfn) + return PCIBIOS_DEVICE_NOT_FOUND; + + if (where & (size - 1)) + return PCIBIOS_BAD_REGISTER_NUMBER; + + spin_lock_irqsave(&ath724x_pci_lock, flags); + + switch (size) { + case 1: + addr = where & ~3; + mask = 0xff000000 >> ((where % 4) * 8); + tval = reg_read(ATH724X_PCI_DEV_BASE + addr); + tval = tval & ~mask; + *value = (tval >> ((4 - (where % 4))*8)); + break; + case 2: + addr = where & ~3; + mask = 0xffff0000 >> ((where % 4)*8); + tval = reg_read(ATH724X_PCI_DEV_BASE + addr); + tval = tval & ~mask; + *value = (tval >> ((4 - (where % 4))*8)); + break; + case 4: + *value = reg_read(ATH724X_PCI_DEV_BASE + where); + break; + default: + spin_unlock_irqrestore(&ath724x_pci_lock, flags); + + return PCIBIOS_BAD_REGISTER_NUMBER; + } + + spin_unlock_irqrestore(&ath724x_pci_lock, flags); + + return PCIBIOS_SUCCESSFUL; +} + +static int ath724x_pci_write(struct pci_bus *bus, unsigned int devfn, int where, + int size, uint32_t value) +{ + unsigned long flags, tval, addr, mask; + + if (devfn) + return PCIBIOS_DEVICE_NOT_FOUND; + + if (where & (size - 1)) + return PCIBIOS_BAD_REGISTER_NUMBER; + + spin_lock_irqsave(&ath724x_pci_lock, flags); + + switch (size) { + case 1: + addr = (ATH724X_PCI_DEV_BASE + where) & ~3; + mask = 0xff000000 >> ((where % 4)*8); + tval = reg_read(addr); + tval = tval & ~mask; + tval |= (value << ((4 - (where % 4))*8)) & mask; + reg_write(addr, tval); + break; + case 2: + addr = (ATH724X_PCI_DEV_BASE + where) & ~3; + mask = 0xffff0000 >> ((where % 4)*8); + tval = reg_read(addr); + tval = tval & ~mask; + tval |= (value << ((4 - (where % 4))*8)) & mask; + reg_write(addr, tval); + break; + case 4: + reg_write((ATH724X_PCI_DEV_BASE + where), value); + break; + default: + spin_unlock_irqrestore(&ath724x_pci_lock, flags); + + return PCIBIOS_BAD_REGISTER_NUMBER; + } + + spin_unlock_irqrestore(&ath724x_pci_lock, flags); + + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops ath724x_pci_ops = { + .read = ath724x_pci_read, + .write = ath724x_pci_write, +}; + +static struct resource ath724x_io_resource = { + .name = "PCI IO space", + .start = 0, + .end = 0, + .flags = IORESOURCE_IO, +}; + +static struct resource ath724x_mem_resource = { + .name = "PCI memory space", + .start = ATH724X_PCI_MEM_BASE, + .end = ATH724X_PCI_MEM_BASE + ATH724X_PCI_MEM_SIZE - 1, + .flags = IORESOURCE_MEM, +}; + +static struct pci_controller ath724x_pci_controller = { + .pci_ops = &ath724x_pci_ops, + .io_resource = &ath724x_io_resource, + .mem_resource = &ath724x_mem_resource, +}; + +void ath724x_pci_add_data(struct ath724x_pci_data *data, int size) +{ + pci_data = data; + pci_data_size = size; +} + +int __init pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, uint8_t pin) +{ + unsigned int devfn = dev->devfn; + int irq = -1; + + if (devfn > pci_data_size - 1) + return irq; + + irq = pci_data[devfn].irq; + + return irq; +} + +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + unsigned int devfn = dev->devfn; + + if (devfn > pci_data_size - 1) + return PCIBIOS_DEVICE_NOT_FOUND; + + dev->dev.platform_data = pci_data[devfn].pdata; + + return PCIBIOS_SUCCESSFUL; +} + +static int __init ath724x_pcibios_init(void) +{ + register_pci_controller(&ath724x_pci_controller); + + return PCIBIOS_SUCCESSFUL; +} + +arch_initcall(ath724x_pcibios_init); diff --git a/arch/mips/pci/pci-bcm63xx.c b/arch/mips/pci/pci-bcm63xx.c index 82e0fde1dba..39eb7c417e2 100644 --- a/arch/mips/pci/pci-bcm63xx.c +++ b/arch/mips/pci/pci-bcm63xx.c @@ -99,7 +99,7 @@ static int __init bcm63xx_pci_init(void) unsigned int mem_size; u32 val; - if (!BCMCPU_IS_6348() && !BCMCPU_IS_6358()) + if (!BCMCPU_IS_6348() && !BCMCPU_IS_6358() && !BCMCPU_IS_6368()) return -ENODEV; if (!bcm63xx_pci_enabled) @@ -159,7 +159,7 @@ static int __init bcm63xx_pci_init(void) /* setup PCI to local bus access, used by PCI device to target * local RAM while bus mastering */ bcm63xx_int_cfg_writel(0, PCI_BASE_ADDRESS_3); - if (BCMCPU_IS_6358()) + if (BCMCPU_IS_6358() || BCMCPU_IS_6368()) val = MPI_SP0_REMAP_ENABLE_MASK; else val = 0; diff --git a/arch/mips/pci/pci-tx4927.c b/arch/mips/pci/pci-tx4927.c index a5807406a7f..a032ae0a533 100644 --- a/arch/mips/pci/pci-tx4927.c +++ b/arch/mips/pci/pci-tx4927.c @@ -85,7 +85,7 @@ void __init tx4927_setup_pcierr_irq(void) { if (request_irq(TXX9_IRQ_BASE + TX4927_IR_PCIERR, tx4927_pcierr_interrupt, - IRQF_DISABLED, "PCI error", + 0, "PCI error", (void *)TX4927_PCIC_REG)) printk(KERN_WARNING "Failed to request irq for PCIERR\n"); } diff --git a/arch/mips/pci/pci-tx4938.c b/arch/mips/pci/pci-tx4938.c index 20e45f30b2e..141bba56248 100644 --- a/arch/mips/pci/pci-tx4938.c +++ b/arch/mips/pci/pci-tx4938.c @@ -136,7 +136,7 @@ void __init tx4938_setup_pcierr_irq(void) { if (request_irq(TXX9_IRQ_BASE + TX4938_IR_PCIERR, tx4927_pcierr_interrupt, - IRQF_DISABLED, "PCI error", + 0, "PCI error", (void *)TX4927_PCIC_REG)) printk(KERN_WARNING "Failed to request irq for PCIERR\n"); } diff --git a/arch/mips/pci/pci-tx4939.c b/arch/mips/pci/pci-tx4939.c index 9ef840693ba..c10fbf2a19d 100644 --- a/arch/mips/pci/pci-tx4939.c +++ b/arch/mips/pci/pci-tx4939.c @@ -101,7 +101,7 @@ void __init tx4939_setup_pcierr_irq(void) { if (request_irq(TXX9_IRQ_BASE + TX4939_IR_PCIERR, tx4927_pcierr_interrupt, - IRQF_DISABLED, "PCI error", + 0, "PCI error", (void *)TX4939_PCIC_REG)) pr_warning("Failed to request irq for PCIERR\n"); } diff --git a/arch/mips/pci/pci-xlr.c b/arch/mips/pci/pci-xlr.c index 38fece16c43..3d701a962ef 100644 --- a/arch/mips/pci/pci-xlr.c +++ b/arch/mips/pci/pci-xlr.c @@ -36,12 +36,18 @@ #include <linux/pci.h> #include <linux/kernel.h> #include <linux/init.h> +#include <linux/msi.h> #include <linux/mm.h> +#include <linux/irq.h> +#include <linux/irqdesc.h> #include <linux/console.h> #include <asm/io.h> #include <asm/netlogic/interrupt.h> +#include <asm/netlogic/haldefs.h> + +#include <asm/netlogic/xlr/msidef.h> #include <asm/netlogic/xlr/iomap.h> #include <asm/netlogic/xlr/pic.h> #include <asm/netlogic/xlr/xlr.h> @@ -150,7 +156,7 @@ struct pci_controller nlm_pci_controller = { .io_offset = 0x00000000UL, }; -int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +static int get_irq_vector(const struct pci_dev *dev) { if (!nlm_chip_is_xls()) return PIC_PCIX_IRQ; /* for XLR just one IRQ*/ @@ -182,6 +188,101 @@ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) return 0; } +#ifdef CONFIG_PCI_MSI +void destroy_irq(unsigned int irq) +{ + /* nothing to do yet */ +} + +void arch_teardown_msi_irq(unsigned int irq) +{ + destroy_irq(irq); +} + +int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc) +{ + struct msi_msg msg; + int irq, ret; + + irq = get_irq_vector(dev); + if (irq <= 0) + return 1; + + msg.address_hi = MSI_ADDR_BASE_HI; + msg.address_lo = MSI_ADDR_BASE_LO | + MSI_ADDR_DEST_MODE_PHYSICAL | + MSI_ADDR_REDIRECTION_CPU; + + msg.data = MSI_DATA_TRIGGER_EDGE | + MSI_DATA_LEVEL_ASSERT | + MSI_DATA_DELIVERY_FIXED; + + ret = irq_set_msi_desc(irq, desc); + if (ret < 0) { + destroy_irq(irq); + return ret; + } + + write_msi_msg(irq, &msg); + return 0; +} +#endif + +/* Extra ACK needed for XLR on chip PCI controller */ +static void xlr_pci_ack(struct irq_data *d) +{ + uint64_t pcibase = nlm_mmio_base(NETLOGIC_IO_PCIX_OFFSET); + + nlm_read_reg(pcibase, (0x140 >> 2)); +} + +/* Extra ACK needed for XLS on chip PCIe controller */ +static void xls_pcie_ack(struct irq_data *d) +{ + uint64_t pciebase_le = nlm_mmio_base(NETLOGIC_IO_PCIE_1_OFFSET); + + switch (d->irq) { + case PIC_PCIE_LINK0_IRQ: + nlm_write_reg(pciebase_le, (0x90 >> 2), 0xffffffff); + break; + case PIC_PCIE_LINK1_IRQ: + nlm_write_reg(pciebase_le, (0x94 >> 2), 0xffffffff); + break; + case PIC_PCIE_LINK2_IRQ: + nlm_write_reg(pciebase_le, (0x190 >> 2), 0xffffffff); + break; + case PIC_PCIE_LINK3_IRQ: + nlm_write_reg(pciebase_le, (0x194 >> 2), 0xffffffff); + break; + } +} + +/* For XLS B silicon, the 3,4 PCI interrupts are different */ +static void xls_pcie_ack_b(struct irq_data *d) +{ + uint64_t pciebase_le = nlm_mmio_base(NETLOGIC_IO_PCIE_1_OFFSET); + + switch (d->irq) { + case PIC_PCIE_LINK0_IRQ: + nlm_write_reg(pciebase_le, (0x90 >> 2), 0xffffffff); + break; + case PIC_PCIE_LINK1_IRQ: + nlm_write_reg(pciebase_le, (0x94 >> 2), 0xffffffff); + break; + case PIC_PCIE_XLSB0_LINK2_IRQ: + nlm_write_reg(pciebase_le, (0x190 >> 2), 0xffffffff); + break; + case PIC_PCIE_XLSB0_LINK3_IRQ: + nlm_write_reg(pciebase_le, (0x194 >> 2), 0xffffffff); + break; + } +} + +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + return get_irq_vector(dev); +} + /* Do platform specific device initialization at pci_enable_device() time */ int pcibios_plat_dev_init(struct pci_dev *dev) { @@ -204,6 +305,31 @@ static int __init pcibios_init(void) pr_info("Registering XLR/XLS PCIX/PCIE Controller.\n"); register_pci_controller(&nlm_pci_controller); + /* + * For PCI interrupts, we need to ack the PCI controller too, overload + * irq handler data to do this + */ + if (nlm_chip_is_xls()) { + if (nlm_chip_is_xls_b()) { + irq_set_handler_data(PIC_PCIE_LINK0_IRQ, + xls_pcie_ack_b); + irq_set_handler_data(PIC_PCIE_LINK1_IRQ, + xls_pcie_ack_b); + irq_set_handler_data(PIC_PCIE_XLSB0_LINK2_IRQ, + xls_pcie_ack_b); + irq_set_handler_data(PIC_PCIE_XLSB0_LINK3_IRQ, + xls_pcie_ack_b); + } else { + irq_set_handler_data(PIC_PCIE_LINK0_IRQ, xls_pcie_ack); + irq_set_handler_data(PIC_PCIE_LINK1_IRQ, xls_pcie_ack); + irq_set_handler_data(PIC_PCIE_LINK2_IRQ, xls_pcie_ack); + irq_set_handler_data(PIC_PCIE_LINK3_IRQ, xls_pcie_ack); + } + } else { + /* XLR PCI controller ACK */ + irq_set_handler_data(PIC_PCIE_XLSB0_LINK3_IRQ, xlr_pci_ack); + } + return 0; } diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c index 41af7fa2887..8ac0d484185 100644 --- a/arch/mips/pci/pci.c +++ b/arch/mips/pci/pci.c @@ -4,8 +4,11 @@ * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * - * Copyright (C) 2003, 04 Ralf Baechle (ralf@linux-mips.org) + * Copyright (C) 2003, 04, 11 Ralf Baechle (ralf@linux-mips.org) + * Copyright (C) 2011 Wind River Systems, + * written by Ralf Baechle (ralf@linux-mips.org) */ +#include <linux/bug.h> #include <linux/kernel.h> #include <linux/mm.h> #include <linux/bootmem.h> @@ -14,6 +17,8 @@ #include <linux/types.h> #include <linux/pci.h> +#include <asm/cpu-info.h> + /* * Indicate whether we respect the PCI setup left by the firmware. * @@ -150,10 +155,32 @@ out: "Skipping PCI bus scan due to resource conflict\n"); } +static void __init pcibios_set_cache_line_size(void) +{ + struct cpuinfo_mips *c = ¤t_cpu_data; + unsigned int lsize; + + /* + * Set PCI cacheline size to that of the highest level in the + * cache hierarchy. + */ + lsize = c->dcache.linesz; + lsize = c->scache.linesz ? : lsize; + lsize = c->tcache.linesz ? : lsize; + + BUG_ON(!lsize); + + pci_dfl_cache_line_size = lsize >> 2; + + pr_debug("PCI: pci_cache_line_size set to %d bytes\n", lsize); +} + static int __init pcibios_init(void) { struct pci_controller *hose; + pcibios_set_cache_line_size(); + /* Scan all of the recorded PCI controllers. */ for (hose = hose_head; hose; hose = hose->next) pcibios_scanbus(hose); diff --git a/arch/mips/pmc-sierra/msp71xx/msp_hwbutton.c b/arch/mips/pmc-sierra/msp71xx/msp_hwbutton.c index c841f083a7f..bb57ed9ea2b 100644 --- a/arch/mips/pmc-sierra/msp71xx/msp_hwbutton.c +++ b/arch/mips/pmc-sierra/msp71xx/msp_hwbutton.c @@ -149,7 +149,7 @@ static int msp_hwbutton_register(struct hwbutton_interrupt *hirq) CIC_EXT_SET_ACTIVE_HI(cic_ext, hirq->eirq); *CIC_EXT_CFG_REG = cic_ext; - return request_irq(hirq->irq, hwbutton_handler, IRQF_DISABLED, + return request_irq(hirq->irq, hwbutton_handler, 0, hirq->name, hirq); } diff --git a/arch/mips/pmc-sierra/msp71xx/msp_setup.c b/arch/mips/pmc-sierra/msp71xx/msp_setup.c index 655308a4e1c..7a834b2f8a5 100644 --- a/arch/mips/pmc-sierra/msp71xx/msp_setup.c +++ b/arch/mips/pmc-sierra/msp71xx/msp_setup.c @@ -209,7 +209,7 @@ void __init prom_init(void) default: /* we don't recognize the machine */ mips_machtype = MACH_UNKNOWN; - panic("***Bogosity factor five***, exiting\n"); + panic("***Bogosity factor five***, exiting"); break; } diff --git a/arch/mips/pmc-sierra/msp71xx/msp_smp.c b/arch/mips/pmc-sierra/msp71xx/msp_smp.c index bec17901ff0..10170580a2d 100644 --- a/arch/mips/pmc-sierra/msp71xx/msp_smp.c +++ b/arch/mips/pmc-sierra/msp71xx/msp_smp.c @@ -51,13 +51,13 @@ static irqreturn_t ipi_call_interrupt(int irq, void *dev_id) static struct irqaction irq_resched = { .handler = ipi_resched_interrupt, - .flags = IRQF_DISABLED | IRQF_PERCPU, + .flags = IRQF_PERCPU, .name = "IPI_resched" }; static struct irqaction irq_call = { .handler = ipi_call_interrupt, - .flags = IRQF_DISABLED | IRQF_PERCPU, + .flags = IRQF_PERCPU, .name = "IPI_call" }; diff --git a/arch/mips/pnx8550/common/int.c b/arch/mips/pnx8550/common/int.c index 1ebe22bdadc..ec684b8c3f7 100644 --- a/arch/mips/pnx8550/common/int.c +++ b/arch/mips/pnx8550/common/int.c @@ -167,13 +167,13 @@ static struct irq_chip level_irq_type = { static struct irqaction gic_action = { .handler = no_action, - .flags = IRQF_DISABLED | IRQF_NO_THREAD, + .flags = IRQF_NO_THREAD, .name = "GIC", }; static struct irqaction timer_action = { .handler = no_action, - .flags = IRQF_DISABLED | IRQF_TIMER, + .flags = IRQF_TIMER, .name = "Timer", }; diff --git a/arch/mips/pnx8550/common/time.c b/arch/mips/pnx8550/common/time.c index 8836c6203df..831d6b369e9 100644 --- a/arch/mips/pnx8550/common/time.c +++ b/arch/mips/pnx8550/common/time.c @@ -59,7 +59,7 @@ static irqreturn_t pnx8xxx_timer_interrupt(int irq, void *dev_id) static struct irqaction pnx8xxx_timer_irq = { .handler = pnx8xxx_timer_interrupt, - .flags = IRQF_DISABLED | IRQF_PERCPU | IRQF_TIMER, + .flags = IRQF_PERCPU | IRQF_TIMER, .name = "pnx8xxx_timer", }; @@ -72,7 +72,7 @@ static irqreturn_t monotonic_interrupt(int irq, void *dev_id) static struct irqaction monotonic_irqaction = { .handler = monotonic_interrupt, - .flags = IRQF_DISABLED | IRQF_TIMER, + .flags = IRQF_TIMER, .name = "Monotonic timer", }; diff --git a/arch/mips/sgi-ip22/Makefile b/arch/mips/sgi-ip22/Makefile index cc538493cae..411cda9ee03 100644 --- a/arch/mips/sgi-ip22/Makefile +++ b/arch/mips/sgi-ip22/Makefile @@ -4,7 +4,7 @@ # obj-y += ip22-mc.o ip22-hpc.o ip22-int.o ip22-time.o ip22-nvram.o \ - ip22-platform.o ip22-reset.o ip22-setup.o + ip22-platform.o ip22-reset.o ip22-setup.o ip22-gio.o obj-$(CONFIG_SGI_IP22) += ip22-berr.o obj-$(CONFIG_SGI_IP28) += ip28-berr.o diff --git a/arch/mips/sgi-ip22/ip22-gio.c b/arch/mips/sgi-ip22/ip22-gio.c new file mode 100644 index 00000000000..f5ebc092aed --- /dev/null +++ b/arch/mips/sgi-ip22/ip22-gio.c @@ -0,0 +1,428 @@ +#include <linux/export.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/slab.h> + +#include <asm/addrspace.h> +#include <asm/paccess.h> +#include <asm/gio_device.h> +#include <asm/sgi/gio.h> +#include <asm/sgi/hpc3.h> +#include <asm/sgi/mc.h> +#include <asm/sgi/ip22.h> + +static struct bus_type gio_bus_type; + +static struct { + const char *name; + __u8 id; +} gio_name_table[] = { + { .name = "SGI Impact", .id = 0x10 }, + { .name = "Phobos G160", .id = 0x35 }, + /* fake IDs */ + { .name = "SGI Newport", .id = 0x7e }, + { .name = "SGI GR2/GR3", .id = 0x7f }, +}; + +static struct device gio_bus = { + .init_name = "gio", +}; + +/** + * gio_match_device - Tell if an of_device structure has a matching + * gio_match structure + * @ids: array of of device match structures to search in + * @dev: the of device structure to match against + * + * Used by a driver to check whether an of_device present in the + * system is in its list of supported devices. + */ +const struct gio_device_id *gio_match_device(const struct gio_device_id *match, + const struct gio_device *dev) +{ + const struct gio_device_id *ids; + + for (ids = match; ids->id != 0xff; ids++) + if (ids->id == dev->id.id) + return ids; + + return NULL; +} +EXPORT_SYMBOL_GPL(gio_match_device); + +struct gio_device *gio_dev_get(struct gio_device *dev) +{ + struct device *tmp; + + if (!dev) + return NULL; + tmp = get_device(&dev->dev); + if (tmp) + return to_gio_device(tmp); + else + return NULL; +} +EXPORT_SYMBOL_GPL(gio_dev_get); + +void gio_dev_put(struct gio_device *dev) +{ + if (dev) + put_device(&dev->dev); +} +EXPORT_SYMBOL_GPL(gio_dev_put); + +/** + * gio_release_dev - free an gio device structure when all users of it are finished. + * @dev: device that's been disconnected + * + * Will be called only by the device core when all users of this gio device are + * done. + */ +void gio_release_dev(struct device *dev) +{ + struct gio_device *giodev; + + giodev = to_gio_device(dev); + kfree(giodev); +} +EXPORT_SYMBOL_GPL(gio_release_dev); + +int gio_device_register(struct gio_device *giodev) +{ + giodev->dev.bus = &gio_bus_type; + giodev->dev.parent = &gio_bus; + return device_register(&giodev->dev); +} +EXPORT_SYMBOL_GPL(gio_device_register); + +void gio_device_unregister(struct gio_device *giodev) +{ + device_unregister(&giodev->dev); +} +EXPORT_SYMBOL_GPL(gio_device_unregister); + +static int gio_bus_match(struct device *dev, struct device_driver *drv) +{ + struct gio_device *gio_dev = to_gio_device(dev); + struct gio_driver *gio_drv = to_gio_driver(drv); + + return gio_match_device(gio_drv->id_table, gio_dev) != NULL; +} + +static int gio_device_probe(struct device *dev) +{ + int error = -ENODEV; + struct gio_driver *drv; + struct gio_device *gio_dev; + const struct gio_device_id *match; + + drv = to_gio_driver(dev->driver); + gio_dev = to_gio_device(dev); + + if (!drv->probe) + return error; + + gio_dev_get(gio_dev); + + match = gio_match_device(drv->id_table, gio_dev); + if (match) + error = drv->probe(gio_dev, match); + if (error) + gio_dev_put(gio_dev); + + return error; +} + +static int gio_device_remove(struct device *dev) +{ + struct gio_device *gio_dev = to_gio_device(dev); + struct gio_driver *drv = to_gio_driver(dev->driver); + + if (dev->driver && drv->remove) + drv->remove(gio_dev); + return 0; +} + +static int gio_device_suspend(struct device *dev, pm_message_t state) +{ + struct gio_device *gio_dev = to_gio_device(dev); + struct gio_driver *drv = to_gio_driver(dev->driver); + int error = 0; + + if (dev->driver && drv->suspend) + error = drv->suspend(gio_dev, state); + return error; +} + +static int gio_device_resume(struct device *dev) +{ + struct gio_device *gio_dev = to_gio_device(dev); + struct gio_driver *drv = to_gio_driver(dev->driver); + int error = 0; + + if (dev->driver && drv->resume) + error = drv->resume(gio_dev); + return error; +} + +static void gio_device_shutdown(struct device *dev) +{ + struct gio_device *gio_dev = to_gio_device(dev); + struct gio_driver *drv = to_gio_driver(dev->driver); + + if (dev->driver && drv->shutdown) + drv->shutdown(gio_dev); +} + +static ssize_t modalias_show(struct device *dev, struct device_attribute *a, + char *buf) +{ + struct gio_device *gio_dev = to_gio_device(dev); + int len = snprintf(buf, PAGE_SIZE, "gio:%x\n", gio_dev->id.id); + + return (len >= PAGE_SIZE) ? (PAGE_SIZE - 1) : len; +} + +static ssize_t name_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct gio_device *giodev; + + giodev = to_gio_device(dev); + return sprintf(buf, "%s", giodev->name); +} + +static ssize_t id_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct gio_device *giodev; + + giodev = to_gio_device(dev); + return sprintf(buf, "%x", giodev->id.id); +} + +static struct device_attribute gio_dev_attrs[] = { + __ATTR_RO(modalias), + __ATTR_RO(name), + __ATTR_RO(id), + __ATTR_NULL, +}; + +static int gio_device_uevent(struct device *dev, struct kobj_uevent_env *env) +{ + struct gio_device *gio_dev = to_gio_device(dev); + + add_uevent_var(env, "MODALIAS=gio:%x", gio_dev->id.id); + return 0; +} + +int gio_register_driver(struct gio_driver *drv) +{ + /* initialize common driver fields */ + if (!drv->driver.name) + drv->driver.name = drv->name; + if (!drv->driver.owner) + drv->driver.owner = drv->owner; + drv->driver.bus = &gio_bus_type; + + /* register with core */ + return driver_register(&drv->driver); +} +EXPORT_SYMBOL_GPL(gio_register_driver); + +void gio_unregister_driver(struct gio_driver *drv) +{ + driver_unregister(&drv->driver); +} +EXPORT_SYMBOL_GPL(gio_unregister_driver); + +void gio_set_master(struct gio_device *dev) +{ + u32 tmp = sgimc->giopar; + + switch (dev->slotno) { + case 0: + tmp |= SGIMC_GIOPAR_MASTERGFX; + break; + case 1: + tmp |= SGIMC_GIOPAR_MASTEREXP0; + break; + case 2: + tmp |= SGIMC_GIOPAR_MASTEREXP1; + break; + } + sgimc->giopar = tmp; +} +EXPORT_SYMBOL_GPL(gio_set_master); + +void ip22_gio_set_64bit(int slotno) +{ + u32 tmp = sgimc->giopar; + + switch (slotno) { + case 0: + tmp |= SGIMC_GIOPAR_GFX64; + break; + case 1: + tmp |= SGIMC_GIOPAR_EXP064; + break; + case 2: + tmp |= SGIMC_GIOPAR_EXP164; + break; + } + sgimc->giopar = tmp; +} + +static int ip22_gio_id(unsigned long addr, u32 *res) +{ + u8 tmp8; + u8 tmp16; + u32 tmp32; + u8 *ptr8; + u16 *ptr16; + u32 *ptr32; + + ptr32 = (void *)CKSEG1ADDR(addr); + if (!get_dbe(tmp32, ptr32)) { + /* + * We got no DBE, but this doesn't mean anything. + * If GIO is pipelined (which can't be disabled + * for GFX slot) we don't get a DBE, but we see + * the transfer size as data. So we do an 8bit + * and a 16bit access and check whether the common + * data matches + */ + ptr8 = (void *)CKSEG1ADDR(addr + 3); + get_dbe(tmp8, ptr8); + ptr16 = (void *)CKSEG1ADDR(addr + 2); + get_dbe(tmp16, ptr16); + if (tmp8 == (tmp16 & 0xff) && + tmp8 == (tmp32 & 0xff) && + tmp16 == (tmp32 & 0xffff)) { + *res = tmp32; + return 1; + } + } + return 0; /* nothing here */ +} + +#define HQ2_MYSTERY_OFFS 0x6A07C +#define NEWPORT_USTATUS_OFFS 0xF133C + +static int ip22_is_gr2(unsigned long addr) +{ + u32 tmp; + u32 *ptr; + + /* HQ2 only allows 32bit accesses */ + ptr = (void *)CKSEG1ADDR(addr + HQ2_MYSTERY_OFFS); + if (!get_dbe(tmp, ptr)) { + if (tmp == 0xdeadbeef) + return 1; + } + return 0; +} + + +static void ip22_check_gio(int slotno, unsigned long addr) +{ + const char *name = "Unknown"; + struct gio_device *gio_dev; + u32 tmp; + __u8 id; + int i; + + /* first look for GR2/GR3 by checking mystery register */ + if (ip22_is_gr2(addr)) + tmp = 0x7f; + else { + if (!ip22_gio_id(addr, &tmp)) { + /* + * no GIO signature at start address of slot, but + * Newport doesn't have one, so let's check usea + * status register + */ + if (ip22_gio_id(addr + NEWPORT_USTATUS_OFFS, &tmp)) + tmp = 0x7e; + else + tmp = 0; + } + } + if (tmp) { + id = GIO_ID(tmp); + if (tmp & GIO_32BIT_ID) { + if (tmp & GIO_64BIT_IFACE) + ip22_gio_set_64bit(slotno); + } + for (i = 0; i < ARRAY_SIZE(gio_name_table); i++) { + if (id == gio_name_table[i].id) { + name = gio_name_table[i].name; + break; + } + } + printk(KERN_INFO "GIO: slot %d : %s (id %x)\n", + slotno, name, id); + gio_dev = kzalloc(sizeof *gio_dev, GFP_KERNEL); + gio_dev->name = name; + gio_dev->slotno = slotno; + gio_dev->id.id = id; + gio_dev->resource.start = addr; + gio_dev->resource.end = addr + 0x3fffff; + gio_dev->resource.flags = IORESOURCE_MEM; + dev_set_name(&gio_dev->dev, "%d", slotno); + gio_device_register(gio_dev); + } else + printk(KERN_INFO "GIO: slot %d : Empty\n", slotno); +} + +static struct bus_type gio_bus_type = { + .name = "gio", + .dev_attrs = gio_dev_attrs, + .match = gio_bus_match, + .probe = gio_device_probe, + .remove = gio_device_remove, + .suspend = gio_device_suspend, + .resume = gio_device_resume, + .shutdown = gio_device_shutdown, + .uevent = gio_device_uevent, +}; + +static struct resource gio_bus_resource = { + .start = GIO_SLOT_GFX_BASE, + .end = GIO_SLOT_GFX_BASE + 0x9fffff, + .name = "GIO Bus", + .flags = IORESOURCE_MEM, +}; + +int __init ip22_gio_init(void) +{ + unsigned int pbdma __maybe_unused; + int ret; + + ret = device_register(&gio_bus); + if (ret) + return ret; + + ret = bus_register(&gio_bus_type); + if (!ret) { + request_resource(&iomem_resource, &gio_bus_resource); + printk(KERN_INFO "GIO: Probing bus...\n"); + + if (ip22_is_fullhouse() || + !get_dbe(pbdma, (unsigned int *)&hpc3c1->pbdma[1])) { + /* Indigo2 and ChallengeS */ + ip22_check_gio(0, GIO_SLOT_GFX_BASE); + ip22_check_gio(1, GIO_SLOT_EXP0_BASE); + } else { + /* Indy */ + ip22_check_gio(0, GIO_SLOT_GFX_BASE); + ip22_check_gio(1, GIO_SLOT_EXP0_BASE); + ip22_check_gio(2, GIO_SLOT_EXP1_BASE); + } + } else + device_unregister(&gio_bus); + + return ret; +} + +subsys_initcall(ip22_gio_init); diff --git a/arch/mips/sgi-ip22/ip22-int.c b/arch/mips/sgi-ip22/ip22-int.c index f72c336ea27..3f2b7633f94 100644 --- a/arch/mips/sgi-ip22/ip22-int.c +++ b/arch/mips/sgi-ip22/ip22-int.c @@ -155,32 +155,32 @@ static void __irq_entry indy_buserror_irq(void) static struct irqaction local0_cascade = { .handler = no_action, - .flags = IRQF_DISABLED | IRQF_NO_THREAD, + .flags = IRQF_NO_THREAD, .name = "local0 cascade", }; static struct irqaction local1_cascade = { .handler = no_action, - .flags = IRQF_DISABLED | IRQF_NO_THREAD, + .flags = IRQF_NO_THREAD, .name = "local1 cascade", }; static struct irqaction buserr = { .handler = no_action, - .flags = IRQF_DISABLED | IRQF_NO_THREAD, + .flags = IRQF_NO_THREAD, .name = "Bus Error", }; static struct irqaction map0_cascade = { .handler = no_action, - .flags = IRQF_DISABLED | IRQF_NO_THREAD, + .flags = IRQF_NO_THREAD, .name = "mapable0 cascade", }; #ifdef USE_LIO3_IRQ static struct irqaction map1_cascade = { .handler = no_action, - .flags = IRQF_DISABLED | IRQF_NO_THREAD, + .flags = IRQF_NO_THREAD, .name = "mapable1 cascade", }; #define SGI_INTERRUPTS SGINT_END diff --git a/arch/mips/sgi-ip22/ip22-mc.c b/arch/mips/sgi-ip22/ip22-mc.c index d22262ee685..75ada8a9713 100644 --- a/arch/mips/sgi-ip22/ip22-mc.c +++ b/arch/mips/sgi-ip22/ip22-mc.c @@ -139,11 +139,11 @@ void __init sgimc_init(void) * zero. */ /* don't touch parity settings for IP28 */ -#ifndef CONFIG_SGI_IP28 tmp = sgimc->cpuctrl0; - tmp |= (SGIMC_CCTRL0_EPERRGIO | SGIMC_CCTRL0_EPERRMEM | - SGIMC_CCTRL0_R4KNOCHKPARR); +#ifndef CONFIG_SGI_IP28 + tmp |= SGIMC_CCTRL0_EPERRGIO | SGIMC_CCTRL0_EPERRMEM; #endif + tmp |= SGIMC_CCTRL0_R4KNOCHKPARR; sgimc->cpuctrl0 = tmp; /* Step 3: Setup the MC write buffer depth, this is controlled @@ -178,7 +178,8 @@ void __init sgimc_init(void) */ /* First the basic invariants across all GIO64 implementations. */ - tmp = SGIMC_GIOPAR_HPC64; /* All 1st HPC's interface at 64bits */ + tmp = sgimc->giopar & SGIMC_GIOPAR_GFX64; /* keep gfx 64bit settings */ + tmp |= SGIMC_GIOPAR_HPC64; /* All 1st HPC's interface at 64bits */ tmp |= SGIMC_GIOPAR_ONEBUS; /* Only one physical GIO bus exists */ if (ip22_is_fullhouse()) { @@ -193,7 +194,6 @@ void __init sgimc_init(void) tmp |= SGIMC_GIOPAR_PLINEEXP0; /* exp[01] pipelined */ tmp |= SGIMC_GIOPAR_PLINEEXP1; tmp |= SGIMC_GIOPAR_MASTEREISA; /* EISA masters */ - tmp |= SGIMC_GIOPAR_GFX64; /* GFX at 64 bits */ } } else { /* Guiness specific settings. */ diff --git a/arch/mips/sgi-ip22/ip22-setup.c b/arch/mips/sgi-ip22/ip22-setup.c index 5e662134947..c7bdfe43df5 100644 --- a/arch/mips/sgi-ip22/ip22-setup.c +++ b/arch/mips/sgi-ip22/ip22-setup.c @@ -26,9 +26,6 @@ #include <asm/sgi/hpc3.h> #include <asm/sgi/ip22.h> -unsigned long sgi_gfxaddr; -EXPORT_SYMBOL_GPL(sgi_gfxaddr); - extern void ip22_be_init(void) __init; void __init plat_mem_setup(void) @@ -78,22 +75,4 @@ void __init plat_mem_setup(void) prom_flags |= PROM_FLAG_USE_AS_CONSOLE; add_preferred_console("arc", 0, NULL); } - -#if defined(CONFIG_VT) && defined(CONFIG_SGI_NEWPORT_CONSOLE) - { - ULONG *gfxinfo; - ULONG * (*__vec)(void) = (void *) (long) - *((_PULONG *)(long)((PROMBLOCK)->pvector + 0x20)); - - gfxinfo = __vec(); - sgi_gfxaddr = ((gfxinfo[1] >= 0xa0000000 - && gfxinfo[1] <= 0xc0000000) - ? gfxinfo[1] - 0xa0000000 : 0); - - /* newport addresses? */ - if (sgi_gfxaddr == 0x1f0f0000 || sgi_gfxaddr == 0x1f4f0000) { - conswitchp = &newport_con; - } - } -#endif } diff --git a/arch/mips/sgi-ip27/ip27-irq.c b/arch/mips/sgi-ip27/ip27-irq.c index f90dce315e0..23642238c68 100644 --- a/arch/mips/sgi-ip27/ip27-irq.c +++ b/arch/mips/sgi-ip27/ip27-irq.c @@ -73,7 +73,7 @@ static inline int alloc_level(int cpu, int irq) level = find_first_zero_bit(hub->irq_alloc_mask, LEVELS_PER_SLICE); if (level >= LEVELS_PER_SLICE) - panic("Cpu %d flooded with devices\n", cpu); + panic("Cpu %d flooded with devices", cpu); __set_bit(level, hub->irq_alloc_mask); si->level_to_irq[level] = irq; @@ -96,7 +96,7 @@ static inline int find_level(cpuid_t *cpunum, int irq) } } - panic("Could not identify cpu/level for irq %d\n", irq); + panic("Could not identify cpu/level for irq %d", irq); } /* @@ -116,7 +116,7 @@ static int ms1bit(unsigned long x) } /* - * This code is unnecessarily complex, because we do IRQF_DISABLED + * This code is unnecessarily complex, because we do * intr enabling. Basically, once we grab the set of intrs we need * to service, we must mask _all_ these interrupts; firstly, to make * sure the same intr does not intr again, causing recursion that diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c index ef74f3267f9..13cfeab5052 100644 --- a/arch/mips/sgi-ip27/ip27-timer.c +++ b/arch/mips/sgi-ip27/ip27-timer.c @@ -91,7 +91,7 @@ static irqreturn_t hub_rt_counter_handler(int irq, void *dev_id) struct irqaction hub_rt_irqaction = { .handler = hub_rt_counter_handler, - .flags = IRQF_DISABLED | IRQF_PERCPU | IRQF_TIMER, + .flags = IRQF_PERCPU | IRQF_TIMER, .name = "hub-rt", }; diff --git a/arch/mips/sgi-ip32/ip32-irq.c b/arch/mips/sgi-ip32/ip32-irq.c index c65ea76d56c..a092860d519 100644 --- a/arch/mips/sgi-ip32/ip32-irq.c +++ b/arch/mips/sgi-ip32/ip32-irq.c @@ -113,13 +113,11 @@ extern irqreturn_t crime_cpuerr_intr(int irq, void *dev_id); static struct irqaction memerr_irq = { .handler = crime_memerr_intr, - .flags = IRQF_DISABLED, .name = "CRIME memory error", }; static struct irqaction cpuerr_irq = { .handler = crime_cpuerr_intr, - .flags = IRQF_DISABLED, .name = "CRIME CPU error", }; diff --git a/arch/mips/sni/irq.c b/arch/mips/sni/irq.c index e8e72bb3a9a..5a4ec75382e 100644 --- a/arch/mips/sni/irq.c +++ b/arch/mips/sni/irq.c @@ -42,7 +42,7 @@ static irqreturn_t sni_isa_irq_handler(int dummy, void *p) struct irqaction sni_isa_irq = { .handler = sni_isa_irq_handler, .name = "ISA", - .flags = IRQF_SHARED | IRQF_DISABLED + .flags = IRQF_SHARED }; /* diff --git a/arch/mips/sni/time.c b/arch/mips/sni/time.c index ec0be14996a..494c9e7847a 100644 --- a/arch/mips/sni/time.c +++ b/arch/mips/sni/time.c @@ -68,7 +68,7 @@ static irqreturn_t a20r_interrupt(int irq, void *dev_id) static struct irqaction a20r_irqaction = { .handler = a20r_interrupt, - .flags = IRQF_DISABLED | IRQF_PERCPU | IRQF_TIMER, + .flags = IRQF_PERCPU | IRQF_TIMER, .name = "a20r-timer", }; diff --git a/arch/mips/txx9/generic/pci.c b/arch/mips/txx9/generic/pci.c index 85a87de17eb..682efb0c108 100644 --- a/arch/mips/txx9/generic/pci.c +++ b/arch/mips/txx9/generic/pci.c @@ -262,7 +262,7 @@ txx9_i8259_irq_setup(int irq) int err; init_i8259_irqs(); - err = request_irq(irq, &i8259_interrupt, IRQF_DISABLED|IRQF_SHARED, + err = request_irq(irq, &i8259_interrupt, IRQF_SHARED, "cascade(i8259)", (void *)(long)irq); if (!err) printk(KERN_INFO "PCI-ISA bridge PIC (irq %d)\n", irq); |