summaryrefslogtreecommitdiffstats
path: root/arch/mips
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips')
-rw-r--r--arch/mips/Kconfig20
-rw-r--r--arch/mips/Makefile7
-rw-r--r--arch/mips/configs/rb532_defconfig1314
-rw-r--r--arch/mips/pci/Makefile1
-rw-r--r--arch/mips/pci/fixup-rc32434.c69
-rw-r--r--arch/mips/pci/ops-rc32434.c207
-rw-r--r--arch/mips/pci/pci-rc32434.c221
-rw-r--r--arch/mips/rb532/Makefile7
-rw-r--r--arch/mips/rb532/devices.c331
-rw-r--r--arch/mips/rb532/gpio.c220
-rw-r--r--arch/mips/rb532/irq.c209
-rw-r--r--arch/mips/rb532/prom.c158
-rw-r--r--arch/mips/rb532/serial.c53
-rw-r--r--arch/mips/rb532/setup.c79
-rw-r--r--arch/mips/rb532/time.c67
15 files changed, 2962 insertions, 1 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 30edc395dce..b9c754f4070 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -558,6 +558,24 @@ config MACH_TX39XX
config MACH_TX49XX
bool "Toshiba TX49 series based machines"
+config MIKROTIK_RB532
+ bool "Mikrotik RB532 boards"
+ select CEVT_R4K
+ select CSRC_R4K
+ select DMA_NONCOHERENT
+ select GENERIC_HARDIRQS_NO__DO_IRQ
+ select HW_HAS_PCI
+ select IRQ_CPU
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SWAP_IO_SPACE
+ select BOOT_RAW
+ select GENERIC_GPIO
+ help
+ Support the Mikrotik(tm) RouterBoard 532 series,
+ based on the IDT RC32434 SoC.
+
config WR_PPMC
bool "Wind River PPMC board"
select CEVT_R4K
@@ -899,7 +917,7 @@ config BOOT_ELF32
config MIPS_L1_CACHE_SHIFT
int
- default "4" if MACH_DECSTATION
+ default "4" if MACH_DECSTATION || MIKROTIK_RB532
default "7" if SGI_IP22 || SGI_IP27 || SGI_IP28 || SNI_RM
default "4" if PMC_MSP4200_EVAL
default "5"
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 356453322b4..9aab51caf16 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -560,6 +560,13 @@ load-$(CONFIG_MACH_TX49XX) += 0xffffffff80100000
core-$(CONFIG_TOSHIBA_JMR3927) += arch/mips/txx9/jmr3927/
#
+# Routerboard 532 board
+#
+core-$(CONFIG_MIKROTIK_RB532) += arch/mips/rb532/
+cflags-$(CONFIG_MIKROTIK_RB532) += -Iinclude/asm-mips/mach-rc32434
+load-$(CONFIG_MIKROTIK_RB532) += 0xffffffff80101000
+
+#
# Toshiba RBTX4927 board or
# Toshiba RBTX4937 board
#
diff --git a/arch/mips/configs/rb532_defconfig b/arch/mips/configs/rb532_defconfig
new file mode 100644
index 00000000000..f28dc32974e
--- /dev/null
+++ b/arch/mips/configs/rb532_defconfig
@@ -0,0 +1,1314 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.25
+# Mon Apr 28 12:24:17 2008
+#
+CONFIG_MIPS=y
+
+#
+# Machine selection
+#
+# CONFIG_MACH_ALCHEMY is not set
+# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_LEMOTE_FULONG is not set
+# CONFIG_MIPS_ATLAS is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
+# CONFIG_PMC_MSP is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SNI_RM is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+CONFIG_MIKROTIK_RB532=y
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_WR_PPMC is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_BOOT_RAW=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_GPIO=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_CPU=y
+CONFIG_SWAP_IO_SPACE=y
+CONFIG_MIPS_L1_CACHE_SHIFT=4
+
+#
+# CPU selection
+#
+# CONFIG_CPU_LOONGSON2 is not set
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_48 is not set
+CONFIG_HZ_100=y
+# CONFIG_HZ_128 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_256 is not set
+# CONFIG_HZ_1000 is not set
+# CONFIG_HZ_1024 is not set
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_HZ=100
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_KEXEC is not set
+# CONFIG_SECCOMP is not set
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+CONFIG_HW_HAS_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
+CONFIG_MMU=y
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_TRAD_SIGNALS=y
+
+#
+# Power management options
+#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+CONFIG_ARPD=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_CONG_BIC=m
+CONFIG_TCP_CONG_CUBIC=m
+CONFIG_TCP_CONG_WESTWOOD=m
+CONFIG_TCP_CONG_HTCP=m
+CONFIG_TCP_CONG_HSTCP=m
+CONFIG_TCP_CONG_HYBLA=m
+CONFIG_TCP_CONG_VEGAS=y
+CONFIG_TCP_CONG_SCALABLE=m
+CONFIG_TCP_CONG_LP=m
+CONFIG_TCP_CONG_VENO=m
+CONFIG_TCP_CONG_YEAH=m
+CONFIG_TCP_CONG_ILLINOIS=m
+# CONFIG_DEFAULT_BIC is not set
+# CONFIG_DEFAULT_CUBIC is not set
+# CONFIG_DEFAULT_HTCP is not set
+CONFIG_DEFAULT_VEGAS=y
+# CONFIG_DEFAULT_WESTWOOD is not set
+# CONFIG_DEFAULT_RENO is not set
+CONFIG_DEFAULT_TCP_CONG="vegas"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+# CONFIG_BRIDGE_NETFILTER is not set
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+CONFIG_NF_CONNTRACK=y
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
+# CONFIG_NF_CT_PROTO_SCTP is not set
+# CONFIG_NF_CT_PROTO_UDPLITE is not set
+# CONFIG_NF_CONNTRACK_AMANDA is not set
+CONFIG_NF_CONNTRACK_FTP=m
+# CONFIG_NF_CONNTRACK_H323 is not set
+CONFIG_NF_CONNTRACK_IRC=m
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+# CONFIG_NF_CONNTRACK_PPTP is not set
+# CONFIG_NF_CONNTRACK_SANE is not set
+# CONFIG_NF_CONNTRACK_SIP is not set
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=y
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+CONFIG_NETFILTER_XT_MATCH_LIMIT=y
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=y
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV4=y
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+# CONFIG_IP_NF_QUEUE is not set
+CONFIG_IP_NF_IPTABLES=y
+# CONFIG_IP_NF_MATCH_RECENT is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_AH is not set
+# CONFIG_IP_NF_MATCH_TTL is not set
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_FILTER=y
+CONFIG_IP_NF_TARGET_REJECT=y
+# CONFIG_IP_NF_TARGET_LOG is not set
+# CONFIG_IP_NF_TARGET_ULOG is not set
+CONFIG_NF_NAT=y
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=y
+# CONFIG_IP_NF_TARGET_REDIRECT is not set
+# CONFIG_IP_NF_TARGET_NETMAP is not set
+# CONFIG_NF_NAT_SNMP_BASIC is not set
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+# CONFIG_NF_NAT_AMANDA is not set
+# CONFIG_NF_NAT_PPTP is not set
+# CONFIG_NF_NAT_H323 is not set
+# CONFIG_NF_NAT_SIP is not set
+CONFIG_IP_NF_MANGLE=y
+# CONFIG_IP_NF_TARGET_ECN is not set
+# CONFIG_IP_NF_TARGET_TTL is not set
+# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_RAW=m
+# CONFIG_IP_NF_ARPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+CONFIG_BRIDGE=y
+CONFIG_VLAN_8021Q=y
+# CONFIG_DECNET is not set
+CONFIG_LLC=y
+CONFIG_LLC2=m
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+# CONFIG_NET_SCH_HTB is not set
+# CONFIG_NET_SCH_HFSC is not set
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_RR=m
+# CONFIG_NET_SCH_RED is not set
+# CONFIG_NET_SCH_SFQ is not set
+# CONFIG_NET_SCH_TEQL is not set
+# CONFIG_NET_SCH_TBF is not set
+# CONFIG_NET_SCH_GRED is not set
+# CONFIG_NET_SCH_DSMARK is not set
+CONFIG_NET_SCH_NETEM=m
+# CONFIG_NET_SCH_INGRESS is not set
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_CLS_U32_PERF=y
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+# CONFIG_NET_CLS_FLOW is not set
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=y
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+# CONFIG_NET_ACT_NAT is not set
+CONFIG_NET_ACT_PEDIT=m
+# CONFIG_NET_ACT_SIMP is not set
+CONFIG_NET_CLS_IND=y
+CONFIG_NET_SCH_FIFO=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+CONFIG_HAMRADIO=y
+
+#
+# Packet Radio protocols
+#
+# CONFIG_AX25 is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+CONFIG_MTD_BLOCK2MTD=y
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+CONFIG_MTD_NAND_PLATFORM=y
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+# CONFIG_BLK_DEV_SD is not set
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_PMP is not set
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+CONFIG_PATA_RB532=y
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_IFB=m
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_KORINA=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_DM9000 is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_TC35815 is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+CONFIG_VIA_RHINE=y
+# CONFIG_VIA_RHINE_MMIO is not set
+CONFIG_VIA_RHINE_NAPI=y
+# CONFIG_SC92031 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_HERMES is not set
+CONFIG_ATMEL=m
+# CONFIG_PCI_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
+
+#
+# Video decoders
+#
+
+#
+# Video and audio decoders
+#
+
+#
+# MPEG video encoders
+#
+# CONFIG_VIDEO_CX2341X is not set
+
+#
+# Video encoders
+#
+
+#
+# Video improvement chips
+#
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_STRADIS is not set
+# CONFIG_SOC_CAMERA is not set
+# CONFIG_RADIO_ADAPTERS is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+# CONFIG_HID is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_GPIO is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SAMPLES is not set
+CONFIG_CMDLINE=""
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=m
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index 57e34cafa49..15e01aec37f 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -49,3 +49,4 @@ obj-$(CONFIG_TOSHIBA_RBTX4938) += fixup-rbtx4938.o
obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o
obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o
obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o
+obj-$(CONFIG_MIKROTIK_RB532) += pci-rc32434.o ops-rc32434.o fixup-rc32434.o
diff --git a/arch/mips/pci/fixup-rc32434.c b/arch/mips/pci/fixup-rc32434.c
new file mode 100644
index 00000000000..75b90dcb7a0
--- /dev/null
+++ b/arch/mips/pci/fixup-rc32434.c
@@ -0,0 +1,69 @@
+/*
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ * stevel@mvista.com or source@mvista.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/mach-rc32434/rc32434.h>
+
+static int __devinitdata irq_map[2][12] = {
+ {0, 0, 2, 3, 2, 3, 0, 0, 0, 0, 0, 1},
+ {0, 0, 1, 3, 0, 2, 1, 3, 0, 2, 1, 3}
+};
+
+int __devinit pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ int irq = 0;
+
+ if (dev->bus->number < 2 && PCI_SLOT(dev->devfn) < 12)
+ irq = irq_map[dev->bus->number][PCI_SLOT(dev->devfn)];
+
+ return irq + GROUP4_IRQ_BASE + 4;
+}
+
+static void rc32434_pci_early_fixup(struct pci_dev *dev)
+{
+ if (PCI_SLOT(dev->devfn) == 6 && dev->bus->number == 0) {
+ /* disable prefetched memory range */
+ pci_write_config_word(dev, PCI_PREF_MEMORY_LIMIT, 0);
+ pci_write_config_word(dev, PCI_PREF_MEMORY_BASE, 0x10);
+
+ pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 4);
+ }
+}
+
+/*
+ * The fixup applies to both the IDT and VIA devices present on the board
+ */
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, rc32434_pci_early_fixup);
+
+/* Do platform specific device initialization at pci_enable_device() time */
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+ return 0;
+}
diff --git a/arch/mips/pci/ops-rc32434.c b/arch/mips/pci/ops-rc32434.c
new file mode 100644
index 00000000000..d1f8fa210ca
--- /dev/null
+++ b/arch/mips/pci/ops-rc32434.c
@@ -0,0 +1,207 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ * pci_ops for IDT EB434 board
+ *
+ * Copyright 2004 IDT Inc. (rischelp@idt.com)
+ * Copyright 2006 Felix Fietkau <nbd@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/pci.h>
+#include <linux/types.h>
+
+#include <asm/cpu.h>
+#include <asm/mach-rc32434/rc32434.h>
+#include <asm/mach-rc32434/pci.h>
+
+#define PCI_ACCESS_READ 0
+#define PCI_ACCESS_WRITE 1
+
+
+#define PCI_CFG_SET(bus, slot, func, off) \
+ (rc32434_pci->pcicfga = (0x80000000 | \
+ ((bus) << 16) | ((slot)<<11) | \
+ ((func)<<8) | (off)))
+
+static inline int config_access(unsigned char access_type,
+ struct pci_bus *bus, unsigned int devfn,
+ unsigned char where, u32 *data)
+{
+ unsigned int slot = PCI_SLOT(devfn);
+ u8 func = PCI_FUNC(devfn);
+
+ /* Setup address */
+ PCI_CFG_SET(bus->number, slot, func, where);
+ rc32434_sync();
+
+ if (access_type == PCI_ACCESS_WRITE)
+ rc32434_pci->pcicfgd = *data;
+ else
+ *data = rc32434_pci->pcicfgd;
+
+ rc32434_sync();
+
+ return 0;
+}
+
+
+/*
+ * We can't address 8 and 16 bit words directly. Instead we have to
+ * read/write a 32bit word and mask/modify the data we actually want.
+ */
+static int read_config_byte(struct pci_bus *bus, unsigned int devfn,
+ int where, u8 *val)
+{
+ u32 data;
+ int ret;
+
+ ret = config_access(PCI_ACCESS_READ, bus, devfn, where, &data);
+ *val = (data >> ((where & 3) << 3)) & 0xff;
+ return ret;
+}
+
+static int read_config_word(struct pci_bus *bus, unsigned int devfn,
+ int where, u16 *val)
+{
+ u32 data;
+ int ret;
+
+ ret = config_access(PCI_ACCESS_READ, bus, devfn, where, &data);
+ *val = (data >> ((where & 3) << 3)) & 0xffff;
+ return ret;
+}
+
+static int read_config_dword(struct pci_bus *bus, unsigned int devfn,
+ int where, u32 *val)
+{
+ int ret;
+ int delay = 1;
+
+ /*
+ * Don't scan too far, else there will be errors with plugged in
+ * daughterboard (rb564).
+ */
+ if (bus->number == 0 && PCI_SLOT(devfn) > 21)
+ return 0;
+
+retry:
+ ret = config_access(PCI_ACCESS_READ, bus, devfn, where, val);
+
+ /*
+ * Certain devices react delayed at device scan time, this
+ * gives them time to settle
+ */
+ if (where == PCI_VENDOR_ID) {
+ if (ret == 0xffffffff || ret == 0x00000000 ||
+ ret == 0x0000ffff || ret == 0xffff0000) {
+ if (delay > 4)
+ return 0;
+ delay *= 2;
+ msleep(delay);
+ goto retry;
+ }
+ }
+
+ return ret;
+}
+
+static int
+write_config_byte(struct pci_bus *bus, unsigned int devfn, int where,
+ u8 val)
+{
+ u32 data = 0;
+
+ if (config_access(PCI_ACCESS_READ, bus, devfn, where, &data))
+ return -1;
+
+ data = (data & ~(0xff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+
+ if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data))
+ return -1;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+
+static int
+write_config_word(struct pci_bus *bus, unsigned int devfn, int where,
+ u16 val)
+{
+ u32 data = 0;
+
+ if (config_access(PCI_ACCESS_READ, bus, devfn, where, &data))
+ return -1;
+
+ data = (data & ~(0xffff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+
+ if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data))
+ return -1;
+
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+
+static int
+write_config_dword(struct pci_bus *bus, unsigned int devfn, int where,
+ u32 val)
+{
+ if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &val))
+ return -1;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_config_read(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 *val)
+{
+ switch (size) {
+ case 1:
+ return read_config_byte(bus, devfn, where, (u8 *) val);
+ case 2:
+ return read_config_word(bus, devfn, where, (u16 *) val);
+ default:
+ return read_config_dword(bus, devfn, where, val);
+ }
+}
+
+static int pci_config_write(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 val)
+{
+ switch (size) {
+ case 1:
+ return write_config_byte(bus, devfn, where, (u8) val);
+ case 2:
+ return write_config_word(bus, devfn, where, (u16) val);
+ default:
+ return write_config_dword(bus, devfn, where, val);
+ }
+}
+
+struct pci_ops rc32434_pci_ops = {
+ .read = pci_config_read,
+ .write = pci_config_write,
+};
diff --git a/arch/mips/pci/pci-rc32434.c b/arch/mips/pci/pci-rc32434.c
new file mode 100644
index 00000000000..1c2821e2f49
--- /dev/null
+++ b/arch/mips/pci/pci-rc32434.c
@@ -0,0 +1,221 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ * PCI initialization for IDT EB434 board
+ *
+ * Copyright 2004 IDT Inc. (rischelp@idt.com)
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/mach-rc32434/rc32434.h>
+#include <asm/mach-rc32434/pci.h>
+
+#define PCI_ACCESS_READ 0
+#define PCI_ACCESS_WRITE 1
+
+/* define an unsigned array for the PCI registers */
+static unsigned int korina_cnfg_regs[25] = {
+ KORINA_CNFG1, KORINA_CNFG2, KORINA_CNFG3, KORINA_CNFG4,
+ KORINA_CNFG5, KORINA_CNFG6, KORINA_CNFG7, KORINA_CNFG8,
+ KORINA_CNFG9, KORINA_CNFG10, KORINA_CNFG11, KORINA_CNFG12,
+ KORINA_CNFG13, KORINA_CNFG14, KORINA_CNFG15, KORINA_CNFG16,
+ KORINA_CNFG17, KORINA_CNFG18, KORINA_CNFG19, KORINA_CNFG20,
+ KORINA_CNFG21, KORINA_CNFG22, KORINA_CNFG23, KORINA_CNFG24
+};
+static struct resource rc32434_res_pci_mem1;
+static struct resource rc32434_res_pci_mem2;
+
+static struct resource rc32434_res_pci_mem1 = {
+ .name = "PCI MEM1",
+ .start = 0x50000000,
+ .end = 0x5FFFFFFF,
+ .flags = IORESOURCE_MEM,
+ .parent = &rc32434_res_pci_mem1,
+ .sibling = NULL,
+ .child = &rc32434_res_pci_mem2
+};
+
+static struct resource rc32434_res_pci_mem2 = {
+ .name = "PCI Mem2",
+ .start = 0x60000000,
+ .end = 0x6FFFFFFF,
+ .flags = IORESOURCE_MEM,
+ .parent = &rc32434_res_pci_mem1,
+ .sibling = NULL,
+ .child = NULL
+};
+
+static struct resource rc32434_res_pci_io1 = {
+ .name = "PCI I/O1",
+ .start = 0x18800000,
+ .end = 0x188FFFFF,
+ .flags = IORESOURCE_IO,
+};
+
+extern struct pci_ops rc32434_pci_ops;
+
+#define PCI_MEM1_START PCI_ADDR_START
+#define PCI_MEM1_END (PCI_ADDR_START + CPUTOPCI_MEM_WIN - 1)
+#define PCI_MEM2_START (PCI_ADDR_START + CPUTOPCI_MEM_WIN)
+#define PCI_MEM2_END (PCI_ADDR_START + (2 * CPUTOPCI_MEM_WIN) - 1)
+#define PCI_IO1_START (PCI_ADDR_START + (2 * CPUTOPCI_MEM_WIN))
+#define PCI_IO1_END \
+ (PCI_ADDR_START + (2 * CPUTOPCI_MEM_WIN) + CPUTOPCI_IO_WIN - 1)
+#define PCI_IO2_START \
+ (PCI_ADDR_START + (2 * CPUTOPCI_MEM_WIN) + CPUTOPCI_IO_WIN)
+#define PCI_IO2_END \
+ (PCI_ADDR_START + (2 * CPUTOPCI_MEM_WIN) + (2 * CPUTOPCI_IO_WIN) - 1)
+
+struct pci_controller rc32434_controller2;
+
+struct pci_controller rc32434_controller = {
+ .pci_ops = &rc32434_pci_ops,
+ .mem_resource = &rc32434_res_pci_mem1,
+ .io_resource = &rc32434_res_pci_io1,
+ .mem_offset = 0,
+ .io_offset = 0,
+
+};
+
+#ifdef __MIPSEB__
+#define PCI_ENDIAN_FLAG PCILBAC_sb_m
+#else
+#define PCI_ENDIAN_FLAG 0
+#endif
+
+static int __init rc32434_pcibridge_init(void)
+{
+ unsigned int pcicvalue, pcicdata = 0;
+ unsigned int dummyread, pcicntlval;
+ int loopCount;
+ unsigned int pci_config_addr;
+
+ pcicvalue = rc32434_pci->pcic;
+ pcicvalue = (pcicvalue >> PCIM_SHFT) & PCIM_BIT_LEN;
+ if (!((pcicvalue == PCIM_H_EA) ||
+ (pcicvalue == PCIM_H_IA_FIX) ||
+ (pcicvalue == PCIM_H_IA_RR))) {
+ pr_err(KERN_ERR "PCI init error!!!\n");
+ /* Not in Host Mode, return ERROR */
+ return -1;
+ }
+ /* Enables the Idle Grant mode, Arbiter Parking */
+ pcicdata |= (PCI_CTL_IGM | PCI_CTL_EAP | PCI_CTL_EN);
+ rc32434_pci->pcic = pcicdata; /* Enable the PCI bus Interface */
+ /* Zero out the PCI status & PCI Status Mask */
+ for (;;) {
+ pcicdata = rc32434_pci->pcis;
+ if (!(pcicdata & PCI_STAT_RIP))
+ break;
+ }
+
+ rc32434_pci->pcis = 0;
+ rc32434_pci->pcism = 0xFFFFFFFF;
+ /* Zero out the PCI decoupled registers */
+ rc32434_pci->pcidac = 0; /*
+ * disable PCI decoupled accesses at
+ * initialization
+ */
+ rc32434_pci->pcidas = 0; /* clear the status */
+ rc32434_pci->pcidasm = 0x0000007F; /* Mask all the interrupts */
+ /* Mask PCI Messaging Interrupts */
+ rc32434_pci_msg->pciiic = 0;
+ rc32434_pci_msg->pciiim = 0xFFFFFFFF;
+ rc32434_pci_msg->pciioic = 0;
+ rc32434_pci_msg->pciioim = 0;
+
+
+ /* Setup PCILB0 as Memory Window */
+ rc32434_pci->pcilba[0].address = (unsigned int) (PCI_ADDR_START);
+
+ /* setup the PCI map address as same as the local address */
+
+ rc32434_pci->pcilba[0].mapping = (unsigned int) (PCI_ADDR_START);
+
+
+ /* Setup PCILBA1 as MEM */
+ rc32434_pci->pcilba[0].control =
+ (((SIZE_256MB & 0x1f) << PCI_LBAC_SIZE_BIT) | PCI_ENDIAN_FLAG);
+ dummyread = rc32434_pci->pcilba[0].control; /* flush the CPU write Buffers */
+ rc32434_pci->pcilba[1].address = 0x60000000;
+ rc32434_pci->pcilba[1].mapping = 0x60000000;
+
+ /* setup PCILBA2 as IO Window */
+ rc32434_pci->pcilba[1].control =
+ (((SIZE_256MB & 0x1f) << PCI_LBAC_SIZE_BIT) | PCI_ENDIAN_FLAG);
+ dummyread = rc32434_pci->pcilba[1].control; /* flush the CPU write Buffers */
+ rc32434_pci->pcilba[2].address = 0x18C00000;
+ rc32434_pci->pcilba[2].mapping = 0x18FFFFFF;
+
+ /* setup PCILBA2 as IO Window */
+ rc32434_pci->pcilba[2].control =
+ (((SIZE_4MB & 0x1f) << PCI_LBAC_SIZE_BIT) | PCI_ENDIAN_FLAG);
+ dummyread = rc32434_pci->pcilba[2].control; /* flush the CPU write Buffers */
+
+ /* Setup PCILBA3 as IO Window */
+ rc32434_pci->pcilba[3].address = 0x18800000;
+ rc32434_pci->pcilba[3].mapping = 0x18800000;
+ rc32434_pci->pcilba[3].control =
+ ((((SIZE_1MB & 0x1ff) << PCI_LBAC_SIZE_BIT) | PCI_LBAC_MSI) |
+ PCI_ENDIAN_FLAG);
+ dummyread = rc32434_pci->pcilba[3].control; /* flush the CPU write Buffers */
+
+ pci_config_addr = (unsigned int) (0x80000004);
+ for (loopCount = 0; loopCount < 24; loopCount++) {
+ rc32434_pci->pcicfga = pci_config_addr;
+ dummyread = rc32434_pci->pcicfga;
+ rc32434_pci->pcicfgd = korina_cnfg_regs[loopCount];
+ dummyread = rc32434_pci->pcicfgd;
+ pci_config_addr += 4;
+ }
+ rc32434_pci->pcitc =
+ (unsigned int) ((PCITC_RTIMER_VAL & 0xff) << PCI_TC_RTIMER_BIT) |
+ ((PCITC_DTIMER_VAL & 0xff) << PCI_TC_DTIMER_BIT);
+
+ pcicntlval = rc32434_pci->pcic;
+ pcicntlval &= ~PCI_CTL_TNR;
+ rc32434_pci->pcic = pcicntlval;
+ pcicntlval = rc32434_pci->pcic;
+
+ return 0;
+}
+
+static int __init rc32434_pci_init(void)
+{
+ pr_info("PCI: Initializing PCI\n");
+
+ ioport_resource.start = rc32434_res_pci_io1.start;
+ ioport_resource.end = rc32434_res_pci_io1.end;
+
+ rc32434_pcibridge_init();
+
+ register_pci_controller(&rc32434_controller);
+ rc32434_sync();
+
+ return 0;
+}
+
+arch_initcall(rc32434_pci_init);
diff --git a/arch/mips/rb532/Makefile b/arch/mips/rb532/Makefile
new file mode 100644
index 00000000000..8f0b6b6a162
--- /dev/null
+++ b/arch/mips/rb532/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for the RB532 board specific parts of the kernel
+#
+
+obj-y += irq.o time.o setup.o serial.o prom.o gpio.o devices.o
+
+EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/rb532/devices.c b/arch/mips/rb532/devices.c
new file mode 100644
index 00000000000..44fb0a62877
--- /dev/null
+++ b/arch/mips/rb532/devices.c
@@ -0,0 +1,331 @@
+/*
+ * RouterBoard 500 Platform devices
+ *
+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/ctype.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+
+#include <asm/bootinfo.h>
+
+#include <asm/mach-rc32434/rc32434.h>
+#include <asm/mach-rc32434/dma.h>
+#include <asm/mach-rc32434/dma_v.h>
+#include <asm/mach-rc32434/eth.h>
+#include <asm/mach-rc32434/rb.h>
+#include <asm/mach-rc32434/integ.h>
+#include <asm/mach-rc32434/gpio.h>
+
+#define ETH0_DMA_RX_IRQ (GROUP1_IRQ_BASE + 0)
+#define ETH0_DMA_TX_IRQ (GROUP1_IRQ_BASE + 1)
+#define ETH0_RX_OVR_IRQ (GROUP3_IRQ_BASE + 9)
+#define ETH0_TX_UND_IRQ (GROUP3_IRQ_BASE + 10)
+
+#define ETH0_RX_DMA_ADDR (DMA0_BASE_ADDR + 0 * DMA_CHAN_OFFSET)
+#define ETH0_TX_DMA_ADDR (DMA0_BASE_ADDR + 1 * DMA_CHAN_OFFSET)
+
+/* NAND definitions */
+#define GPIO_RDY (1 << 0x08)
+#define GPIO_WPX (1 << 0x09)
+#define GPIO_ALE (1 << 0x0a)
+#define GPIO_CLE (1 << 0x0b)
+
+extern char *board_type;
+
+static struct resource korina_dev0_res[] = {
+ {
+ .name = "korina_regs",
+ .start = ETH0_BASE_ADDR,
+ .end = ETH0_BASE_ADDR + sizeof(struct eth_regs),
+ .flags = IORESOURCE_MEM,
+ }, {
+ .name = "korina_rx",
+ .start = ETH0_DMA_RX_IRQ,
+ .end = ETH0_DMA_RX_IRQ,
+ .flags = IORESOURCE_IRQ
+ }, {
+ .name = "korina_tx",
+ .start = ETH0_DMA_TX_IRQ,
+ .end = ETH0_DMA_TX_IRQ,
+ .flags = IORESOURCE_IRQ
+ }, {
+ .name = "korina_ovr",
+ .start = ETH0_RX_OVR_IRQ,
+ .end = ETH0_RX_OVR_IRQ,
+ .flags = IORESOURCE_IRQ
+ }, {
+ .name = "korina_und",
+ .start = ETH0_TX_UND_IRQ,
+ .end = ETH0_TX_UND_IRQ,
+ .flags = IORESOURCE_IRQ
+ }, {
+ .name = "korina_dma_rx",
+ .start = ETH0_RX_DMA_ADDR,
+ .end = ETH0_RX_DMA_ADDR + DMA_CHAN_OFFSET - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .name = "korina_dma_tx",
+ .start = ETH0_TX_DMA_ADDR,
+ .end = ETH0_TX_DMA_ADDR + DMA_CHAN_OFFSET - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct korina_device korina_dev0_data = {
+ .name = "korina0",
+ .mac = {0xde, 0xca, 0xff, 0xc0, 0xff, 0xee}
+};
+
+static struct platform_device korina_dev0 = {
+ .id = 0,
+ .name = "korina",
+ .dev.platform_data = &korina_dev0_data,
+ .resource = korina_dev0_res,
+ .num_resources = ARRAY_SIZE(korina_dev0_res),
+};
+
+#define CF_GPIO_NUM 13
+
+static struct resource cf_slot0_res[] = {
+ {
+ .name = "cf_membase",
+ .flags = IORESOURCE_MEM
+ }, {
+ .name = "cf_irq",
+ .start = (8 + 4 * 32 + CF_GPIO_NUM), /* 149 */
+ .end = (8 + 4 * 32 + CF_GPIO_NUM),
+ .flags = IORESOURCE_IRQ
+ }
+};
+
+static struct cf_device cf_slot0_data = {
+ .gpio_pin = 13
+};
+
+static struct platform_device cf_slot0 = {
+ .id = 0,
+ .name = "pata-rb532-cf",
+ .dev.platform_data = &cf_slot0_data,
+ .resource = cf_slot0_res,
+ .num_resources = ARRAY_SIZE(cf_slot0_res),
+};
+
+/* Resources and device for NAND */
+static int rb532_dev_ready(struct mtd_info *mtd)
+{
+ return readl(IDT434_REG_BASE + GPIOD) & GPIO_RDY;
+}
+
+static void rb532_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+ struct nand_chip *chip = mtd->priv;
+ unsigned char orbits, nandbits;
+
+ if (ctrl & NAND_CTRL_CHANGE) {
+ orbits = (ctrl & NAND_CLE) << 1;
+ orbits |= (ctrl & NAND_ALE) >> 1;
+
+ nandbits = (~ctrl & NAND_CLE) << 1;
+ nandbits |= (~ctrl & NAND_ALE) >> 1;
+
+ set_latch_u5(orbits, nandbits);
+ }
+ if (cmd != NAND_CMD_NONE)
+ writeb(cmd, chip->IO_ADDR_W);
+}
+
+static struct resource nand_slot0_res[] = {
+ [0] = {
+ .name = "nand_membase",
+ .flags = IORESOURCE_MEM
+ }
+};
+
+static struct platform_nand_data rb532_nand_data = {
+ .ctrl.dev_ready = rb532_dev_ready,
+ .ctrl.cmd_ctrl = rb532_cmd_ctrl,
+};
+
+static struct platform_device nand_slot0 = {
+ .name = "gen_nand",
+ .id = -1,
+ .resource = nand_slot0_res,
+ .num_resources = ARRAY_SIZE(nand_slot0_res),
+ .dev.platform_data = &rb532_nand_data,
+};
+
+static struct mtd_partition rb532_partition_info[] = {
+ {
+ .name = "Routerboard NAND boot",
+ .offset = 0,
+ .size = 4 * 1024 * 1024,
+ }, {
+ .name = "rootfs",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+static struct platform_device rb532_led = {
+ .name = "rb532-led",
+ .id = 0,
+};
+
+static struct gpio_keys_button rb532_gpio_btn[] = {
+ {
+ .gpio = 1,
+ .code = BTN_0,
+ .desc = "S1",
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_platform_data rb532_gpio_btn_data = {
+ .buttons = rb532_gpio_btn,
+ .nbuttons = ARRAY_SIZE(rb532_gpio_btn),
+};
+
+static struct platform_device rb532_button = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &rb532_gpio_btn_data,
+ }
+};
+
+static struct resource rb532_wdt_res[] = {
+ {
+ .name = "rb532_wdt_res",
+ .start = INTEG0_BASE_ADDR,
+ .end = INTEG0_BASE_ADDR + sizeof(struct integ),
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device rb532_wdt = {
+ .name = "rc32434_wdt",
+ .id = -1,
+ .resource = rb532_wdt_res,
+ .num_resources = ARRAY_SIZE(rb532_wdt_res),
+};
+
+static struct platform_device *rb532_devs[] = {
+ &korina_dev0,
+ &nand_slot0,
+ &cf_slot0,
+ &rb532_led,
+ &rb532_button,
+ &rb532_wdt
+};
+
+static void __init parse_mac_addr(char *macstr)
+{
+ int i, j;
+ unsigned char result, value;
+
+ for (i = 0; i < 6; i++) {
+ result = 0;
+
+ if (i != 5 && *(macstr + 2) != ':')
+ return;
+
+ for (j = 0; j < 2; j++) {
+ if (isxdigit(*macstr)
+ && (value =
+ isdigit(*macstr) ? *macstr -
+ '0' : toupper(*macstr) - 'A' + 10) < 16) {
+ result = result * 16 + value;
+ macstr++;
+ } else
+ return;
+ }
+
+ macstr++;
+ korina_dev0_data.mac[i] = result;
+ }
+}
+
+
+/* DEVICE CONTROLLER 1 */
+#define CFG_DC_DEV1 ((void *)0xb8010010)
+#define CFG_DC_DEV2 ((void *)0xb8010020)
+#define CFG_DC_DEVBASE 0x0
+#define CFG_DC_DEVMASK 0x4
+#define CFG_DC_DEVC 0x8
+#define CFG_DC_DEVTC 0xC
+
+/* NAND definitions */
+#define NAND_CHIP_DELAY 25
+
+static void __init rb532_nand_setup(void)
+{
+ switch (mips_machtype) {
+ case MACH_MIKROTIK_RB532A:
+ set_latch_u5(LO_FOFF | LO_CEX,
+ LO_ULED | LO_ALE | LO_CLE | LO_WPX);
+ break;
+ default:
+ set_latch_u5(LO_WPX | LO_FOFF | LO_CEX,
+ LO_ULED | LO_ALE | LO_CLE);
+ break;
+ }
+
+ /* Setup NAND specific settings */
+ rb532_nand_data.chip.nr_chips = 1;
+ rb532_nand_data.chip.nr_partitions = ARRAY_SIZE(rb532_partition_info);
+ rb532_nand_data.chip.partitions = rb532_partition_info;
+ rb532_nand_data.chip.chip_delay = NAND_CHIP_DELAY;
+ rb532_nand_data.chip.options = NAND_NO_AUTOINCR;
+}
+
+
+static int __init plat_setup_devices(void)
+{
+ /* Look for the CF card reader */
+ if (!readl(CFG_DC_DEV1 + CFG_DC_DEVMASK))
+ rb532_devs[1] = NULL;
+ else {
+ cf_slot0_res[0].start =
+ readl(CFG_DC_DEV1 + CFG_DC_DEVBASE);
+ cf_slot0_res[0].end = cf_slot0_res[0].start + 0x1000;
+ }
+
+ /* Read the NAND resources from the device controller */
+ nand_slot0_res[0].start = readl(CFG_DC_DEV2 + CFG_DC_DEVBASE);
+ nand_slot0_res[0].end = nand_slot0_res[0].start + 0x1000;
+
+ /* Initialise the NAND device */
+ rb532_nand_setup();
+
+ return platform_add_devices(rb532_devs, ARRAY_SIZE(rb532_devs));
+}
+
+static int __init setup_kmac(char *s)
+{
+ printk(KERN_INFO "korina mac = %s\n", s);
+ parse_mac_addr(s);
+ return 0;
+}
+
+__setup("kmac=", setup_kmac);
+
+arch_initcall(plat_setup_devices);
diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c
new file mode 100644
index 00000000000..b2fe82dba0a
--- /dev/null
+++ b/arch/mips/rb532/gpio.c
@@ -0,0 +1,220 @@
+/*
+ * Miscellaneous functions for IDT EB434 board
+ *
+ * Copyright 2004 IDT Inc. (rischelp@idt.com)
+ * Copyright 2006 Phil Sutter <n0-1@freewrt.org>
+ * Copyright 2007 Florian Fainelli <florian@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+
+#include <asm/addrspace.h>
+
+#include <asm/mach-rc32434/rb.h>
+
+struct rb532_gpio_reg __iomem *rb532_gpio_reg0;
+EXPORT_SYMBOL(rb532_gpio_reg0);
+
+struct mpmc_device dev3;
+
+static struct resource rb532_gpio_reg0_res[] = {
+ {
+ .name = "gpio_reg0",
+ .start = (u32)(IDT434_REG_BASE + GPIOBASE),
+ .end = (u32)(IDT434_REG_BASE + GPIOBASE + sizeof(struct rb532_gpio_reg)),
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct resource rb532_dev3_ctl_res[] = {
+ {
+ .name = "dev3_ctl",
+ .start = (u32)(IDT434_REG_BASE + DEV3BASE),
+ .end = (u32)(IDT434_REG_BASE + DEV3BASE + sizeof(struct dev_reg)),
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+void set_434_reg(unsigned reg_offs, unsigned bit, unsigned len, unsigned val)
+{
+ unsigned flags, data;
+ unsigned i = 0;
+
+ spin_lock_irqsave(&dev3.lock, flags);
+
+ data = *(volatile unsigned *) (IDT434_REG_BASE + reg_offs);
+ for (i = 0; i != len; ++i) {
+ if (val & (1 << i))
+ data |= (1 << (i + bit));
+ else
+ data &= ~(1 << (i + bit));
+ }
+ writel(data, (IDT434_REG_BASE + reg_offs));
+
+ spin_unlock_irqrestore(&dev3.lock, flags);
+}
+EXPORT_SYMBOL(set_434_reg);
+
+unsigned get_434_reg(unsigned reg_offs)
+{
+ return readl(IDT434_REG_BASE + reg_offs);
+}
+EXPORT_SYMBOL(get_434_reg);
+
+void set_latch_u5(unsigned char or_mask, unsigned char nand_mask)
+{
+ unsigned flags;
+
+ spin_lock_irqsave(&dev3.lock, flags);
+
+ dev3.state = (dev3.state | or_mask) & ~nand_mask;
+ writel(dev3.state, &dev3.base);
+
+ spin_unlock_irqrestore(&dev3.lock, flags);
+}
+EXPORT_SYMBOL(set_latch_u5);
+
+unsigned char get_latch_u5(void)
+{
+ return dev3.state;
+}
+EXPORT_SYMBOL(get_latch_u5);
+
+int rb532_gpio_get_value(unsigned gpio)
+{
+ return readl(&rb532_gpio_reg0->gpiod) & (1 << gpio);
+}
+EXPORT_SYMBOL(rb532_gpio_get_value);
+
+void rb532_gpio_set_value(unsigned gpio, int value)
+{
+ unsigned tmp;
+
+ tmp = readl(&rb532_gpio_reg0->gpiod) & ~(1 << gpio);
+ if (value)
+ tmp |= 1 << gpio;
+
+ writel(tmp, (void *)&rb532_gpio_reg0->gpiod);
+}
+EXPORT_SYMBOL(rb532_gpio_set_value);
+
+int rb532_gpio_direction_input(unsigned gpio)
+{
+ writel(readl(&rb532_gpio_reg0->gpiocfg) & ~(1 << gpio),
+ (void *)&rb532_gpio_reg0->gpiocfg);
+
+ return 0;
+}
+EXPORT_SYMBOL(rb532_gpio_direction_input);
+
+int rb532_gpio_direction_output(unsigned gpio, int value)
+{
+ gpio_set_value(gpio, value);
+ writel(readl(&rb532_gpio_reg0->gpiocfg) | (1 << gpio),
+ (void *)&rb532_gpio_reg0->gpiocfg);
+
+ return 0;
+}
+EXPORT_SYMBOL(rb532_gpio_direction_output);
+
+void rb532_gpio_set_int_level(unsigned gpio, int value)
+{
+ unsigned tmp;
+
+ tmp = readl(&rb532_gpio_reg0->gpioilevel) & ~(1 << gpio);
+ if (value)
+ tmp |= 1 << gpio;
+ writel(tmp, (void *)&rb532_gpio_reg0->gpioilevel);
+}
+EXPORT_SYMBOL(rb532_gpio_set_int_level);
+
+int rb532_gpio_get_int_level(unsigned gpio)
+{
+ return readl(&rb532_gpio_reg0->gpioilevel) & (1 << gpio);
+}
+EXPORT_SYMBOL(rb532_gpio_get_int_level);
+
+void rb532_gpio_set_int_status(unsigned gpio, int value)
+{
+ unsigned tmp;
+
+ tmp = readl(&rb532_gpio_reg0->gpioistat);
+ if (value)
+ tmp |= 1 << gpio;
+ writel(tmp, (void *)&rb532_gpio_reg0->gpioistat);
+}
+EXPORT_SYMBOL(rb532_gpio_set_int_status);
+
+int rb532_gpio_get_int_status(unsigned gpio)
+{
+ return readl(&rb532_gpio_reg0->gpioistat) & (1 << gpio);
+}
+EXPORT_SYMBOL(rb532_gpio_get_int_status);
+
+void rb532_gpio_set_func(unsigned gpio, int value)
+{
+ unsigned tmp;
+
+ tmp = readl(&rb532_gpio_reg0->gpiofunc);
+ if (value)
+ tmp |= 1 << gpio;
+ writel(tmp, (void *)&rb532_gpio_reg0->gpiofunc);
+}
+EXPORT_SYMBOL(rb532_gpio_set_func);
+
+int rb532_gpio_get_func(unsigned gpio)
+{
+ return readl(&rb532_gpio_reg0->gpiofunc) & (1 << gpio);
+}
+EXPORT_SYMBOL(rb532_gpio_get_func);
+
+int __init rb532_gpio_init(void)
+{
+ rb532_gpio_reg0 = ioremap_nocache(rb532_gpio_reg0_res[0].start,
+ rb532_gpio_reg0_res[0].end -
+ rb532_gpio_reg0_res[0].start);
+
+ if (!rb532_gpio_reg0) {
+ printk(KERN_ERR "rb532: cannot remap GPIO register 0\n");
+ return -ENXIO;
+ }
+
+ dev3.base = ioremap_nocache(rb532_dev3_ctl_res[0].start,
+ rb532_dev3_ctl_res[0].end -
+ rb532_dev3_ctl_res[0].start);
+
+ if (!dev3.base) {
+ printk(KERN_ERR "rb532: cannot remap device controller 3\n");
+ return -ENXIO;
+ }
+
+ return 0;
+}
+arch_initcall(rb532_gpio_init);
diff --git a/arch/mips/rb532/irq.c b/arch/mips/rb532/irq.c
new file mode 100644
index 00000000000..c0d0f950caf
--- /dev/null
+++ b/arch/mips/rb532/irq.c
@@ -0,0 +1,209 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Copyright 2002 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ * stevel@mvista.com or source@mvista.com
+ */
+
+#include <linux/bitops.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel_stat.h>
+#include <linux/module.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/timex.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/delay.h>
+
+#include <asm/bootinfo.h>
+#include <asm/time.h>
+#include <asm/mipsregs.h>
+#include <asm/system.h>
+
+#include <asm/mach-rc32434/rc32434.h>
+
+struct intr_group {
+ u32 mask; /* mask of valid bits in pending/mask registers */
+ volatile u32 *base_addr;
+};
+
+#define RC32434_NR_IRQS (GROUP4_IRQ_BASE + 32)
+
+#if (NR_IRQS < RC32434_NR_IRQS)
+#error Too little irqs defined. Did you override <asm/irq.h> ?
+#endif
+
+static const struct intr_group intr_group[NUM_INTR_GROUPS] = {
+ {
+ .mask = 0x0000efff,
+ .base_addr = (u32 *) KSEG1ADDR(IC_GROUP0_PEND + 0 * IC_GROUP_OFFSET)},
+ {
+ .mask = 0x00001fff,
+ .base_addr = (u32 *) KSEG1ADDR(IC_GROUP0_PEND + 1 * IC_GROUP_OFFSET)},
+ {
+ .mask = 0x00000007,
+ .base_addr = (u32 *) KSEG1ADDR(IC_GROUP0_PEND + 2 * IC_GROUP_OFFSET)},
+ {
+ .mask = 0x0003ffff,
+ .base_addr = (u32 *) KSEG1ADDR(IC_GROUP0_PEND + 3 * IC_GROUP_OFFSET)},
+ {
+ .mask = 0xffffffff,
+ .base_addr = (u32 *) KSEG1ADDR(IC_GROUP0_PEND + 4 * IC_GROUP_OFFSET)}
+};
+
+#define READ_PEND(base) (*(base))
+#define READ_MASK(base) (*(base + 2))
+#define WRITE_MASK(base, val) (*(base + 2) = (val))
+
+static inline int irq_to_group(unsigned int irq_nr)
+{
+ return (irq_nr - GROUP0_IRQ_BASE) >> 5;
+}
+
+static inline int group_to_ip(unsigned int group)
+{
+ return group + 2;
+}
+
+static inline void enable_local_irq(unsigned int ip)
+{
+ int ipnum = 0x100 << ip;
+
+ set_c0_status(ipnum);
+}
+
+static inline void disable_local_irq(unsigned int ip)
+{
+ int ipnum = 0x100 << ip;
+
+ clear_c0_status(ipnum);
+}
+
+static inline void ack_local_irq(unsigned int ip)
+{
+ int ipnum = 0x100 << ip;
+
+ clear_c0_cause(ipnum);
+}
+
+static void rb532_enable_irq(unsigned int irq_nr)
+{
+ int ip = irq_nr - GROUP0_IRQ_BASE;
+ unsigned int group, intr_bit;
+ volatile unsigned int *addr;
+
+ if (ip < 0)
+ enable_local_irq(irq_nr);
+ else {
+ group = ip >> 5;
+
+ ip &= (1 << 5) - 1;
+ intr_bit = 1 << ip;
+
+ enable_local_irq(group_to_ip(group));
+
+ addr = intr_group[group].base_addr;
+ WRITE_MASK(addr, READ_MASK(addr) & ~intr_bit);
+ }
+}
+
+static void rb532_disable_irq(unsigned int irq_nr)
+{
+ int ip = irq_nr - GROUP0_IRQ_BASE;
+ unsigned int group, intr_bit, mask;
+ volatile unsigned int *addr;
+
+ if (ip < 0) {
+ disable_local_irq(irq_nr);
+ } else {
+ group = ip >> 5;
+
+ ip &= (1 << 5) - 1;
+ intr_bit = 1 << ip;
+ addr = intr_group[group].base_addr;
+ mask = READ_MASK(addr);
+ mask |= intr_bit;
+ WRITE_MASK(addr, mask);
+
+ /*
+ * if there are no more interrupts enabled in this
+ * group, disable corresponding IP
+ */
+ if (mask == intr_group[group].mask)
+ disable_local_irq(group_to_ip(group));
+ }
+}
+
+static void rb532_mask_and_ack_irq(unsigned int irq_nr)
+{
+ rb532_disable_irq(irq_nr);
+ ack_local_irq(group_to_ip(irq_to_group(irq_nr)));
+}
+
+static struct irq_chip rc32434_irq_type = {
+ .name = "RB532",
+ .ack = rb532_disable_irq,
+ .mask = rb532_disable_irq,
+ .mask_ack = rb532_mask_and_ack_irq,
+ .unmask = rb532_enable_irq,
+};
+
+void __init arch_init_irq(void)
+{
+ int i;
+
+ pr_info("Initializing IRQ's: %d out of %d\n", RC32434_NR_IRQS, NR_IRQS);
+
+ for (i = 0; i < RC32434_NR_IRQS; i++)
+ set_irq_chip_and_handler(i, &rc32434_irq_type,
+ handle_level_irq);
+}
+
+/* Main Interrupt dispatcher */
+asmlinkage void plat_irq_dispatch(void)
+{
+ unsigned int ip, pend, group;
+ volatile unsigned int *addr;
+ unsigned int cp0_cause = read_c0_cause() & read_c0_status();
+
+ if (cp0_cause & CAUSEF_IP7) {
+ do_IRQ(7);
+ } else {
+ ip = (cp0_cause & 0x7c00);
+ if (ip) {
+ group = 21 + (fls(ip) - 32);
+
+ addr = intr_group[group].base_addr;
+
+ pend = READ_PEND(addr);
+ pend &= ~READ_MASK(addr); /* only unmasked interrupts */
+ pend = 39 + (fls(pend) - 32);
+ do_IRQ((group << 5) + pend);
+ }
+ }
+}
diff --git a/arch/mips/rb532/prom.c b/arch/mips/rb532/prom.c
new file mode 100644
index 00000000000..1bc0af8febf
--- /dev/null
+++ b/arch/mips/rb532/prom.c
@@ -0,0 +1,158 @@
+/*
+ * RouterBoard 500 specific prom routines
+ *
+ * Copyright (C) 2003, Peter Sadik <peter.sadik@idt.com>
+ * Copyright (C) 2005-2006, P.Christeas <p_christ@hol.gr>
+ * Copyright (C) 2007, Gabor Juhos <juhosg@openwrt.org>
+ * Felix Fietkau <nbd@openwrt.org>
+ * Florian Fainelli <florian@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/console.h>
+#include <linux/bootmem.h>
+#include <linux/ioport.h>
+#include <linux/blkdev.h>
+
+#include <asm/bootinfo.h>
+#include <asm/mach-rc32434/ddr.h>
+#include <asm/mach-rc32434/prom.h>
+
+extern void __init setup_serial_port(void);
+
+unsigned int idt_cpu_freq = 132000000;
+EXPORT_SYMBOL(idt_cpu_freq);
+unsigned int gpio_bootup_state;
+EXPORT_SYMBOL(gpio_bootup_state);
+
+static struct resource ddr_reg[] = {
+ {
+ .name = "ddr-reg",
+ .start = DDR0_PHYS_ADDR,
+ .end = DDR0_PHYS_ADDR + sizeof(struct ddr_ram),
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+void __init prom_free_prom_memory(void)
+{
+ /* No prom memory to free */
+}
+
+static inline int match_tag(char *arg, const char *tag)
+{
+ return strncmp(arg, tag, strlen(tag)) == 0;
+}
+
+static inline unsigned long tag2ul(char *arg, const char *tag)
+{
+ char *num;
+
+ num = arg + strlen(tag);
+ return simple_strtoul(num, 0, 10);
+}
+
+void __init prom_setup_cmdline(void)
+{
+ char cmd_line[CL_SIZE];
+ char *cp, *board;
+ int prom_argc;
+ char **prom_argv, **prom_envp;
+ int i;
+
+ prom_argc = fw_arg0;
+ prom_argv = (char **) fw_arg1;
+ prom_envp = (char **) fw_arg2;
+
+ cp = cmd_line;
+ /* Note: it is common that parameters start
+ * at argv[1] and not argv[0],
+ * however, our elf loader starts at [0] */
+ for (i = 0; i < prom_argc; i++) {
+ if (match_tag(prom_argv[i], FREQ_TAG)) {
+ idt_cpu_freq = tag2ul(prom_argv[i], FREQ_TAG);
+ continue;
+ }
+#ifdef IGNORE_CMDLINE_MEM
+ /* parses out the "mem=xx" arg */
+ if (match_tag(prom_argv[i], MEM_TAG))
+ continue;
+#endif
+ if (i > 0)
+ *(cp++) = ' ';
+ if (match_tag(prom_argv[i], BOARD_TAG)) {
+ board = prom_argv[i] + strlen(BOARD_TAG);
+
+ if (match_tag(board, BOARD_RB532A))
+ mips_machtype = MACH_MIKROTIK_RB532A;
+ else
+ mips_machtype = MACH_MIKROTIK_RB532;
+ }
+
+ if (match_tag(prom_argv[i], GPIO_TAG))
+ gpio_bootup_state = tag2ul(prom_argv[i], GPIO_TAG);
+
+ strcpy(cp, prom_argv[i]);
+ cp += strlen(prom_argv[i]);
+ }
+ *(cp++) = ' ';
+
+ i = strlen(arcs_cmdline);
+ if (i > 0) {
+ *(cp++) = ' ';
+ strcpy(cp, arcs_cmdline);
+ cp += strlen(arcs_cmdline);
+ }
+ if (gpio_bootup_state & 0x02)
+ strcpy(cp, GPIO_INIT_NOBUTTON);
+ else
+ strcpy(cp, GPIO_INIT_BUTTON);
+
+ cmd_line[CL_SIZE-1] = '\0';
+
+ strcpy(arcs_cmdline, cmd_line);
+}
+
+void __init prom_init(void)
+{
+ struct ddr_ram __iomem *ddr;
+ phys_t memsize;
+ phys_t ddrbase;
+
+ ddr = ioremap_nocache(ddr_reg[0].start,
+ ddr_reg[0].end - ddr_reg[0].start);
+
+ if (!ddr) {
+ printk(KERN_ERR "Unable to remap DDR register\n");
+ return;
+ }
+
+ ddrbase = (phys_t)&ddr->ddrbase;
+ memsize = (phys_t)&ddr->ddrmask;
+ memsize = 0 - memsize;
+
+ prom_setup_cmdline();
+
+ /* give all RAM to boot allocator,
+ * except for the first 0x400 and the last 0x200 bytes */
+ add_memory_region(ddrbase + 0x400, memsize - 0x600, BOOT_MEM_RAM);
+}
diff --git a/arch/mips/rb532/serial.c b/arch/mips/rb532/serial.c
new file mode 100644
index 00000000000..1a05b5ddee0
--- /dev/null
+++ b/arch/mips/rb532/serial.c
@@ -0,0 +1,53 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ * Serial port initialisation.
+ *
+ * Copyright 2004 IDT Inc. (rischelp@idt.com)
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/serial_core.h>
+#include <linux/serial_8250.h>
+
+#include <asm/serial.h>
+#include <asm/mach-rc32434/rc32434.h>
+
+extern unsigned int idt_cpu_freq;
+
+static struct uart_port rb532_uart = {
+ .type = PORT_16550A,
+ .line = 0,
+ .irq = RC32434_UART0_IRQ,
+ .iotype = UPIO_MEM,
+ .membase = (char *)KSEG1ADDR(RC32434_UART0_BASE),
+ .regshift = 2
+};
+
+int __init setup_serial_port(void)
+{
+ rb532_uart.uartclk = idt_cpu_freq;
+
+ return early_serial_setup(&rb532_uart);
+}
+arch_initcall(setup_serial_port);
diff --git a/arch/mips/rb532/setup.c b/arch/mips/rb532/setup.c
new file mode 100644
index 00000000000..7aafa95ac20
--- /dev/null
+++ b/arch/mips/rb532/setup.c
@@ -0,0 +1,79 @@
+/*
+ * setup.c - boot time setup code
+ */
+
+#include <linux/init.h>
+
+#include <asm/bootinfo.h>
+#include <asm/reboot.h>
+#include <asm/time.h>
+#include <linux/ioport.h>
+
+#include <asm/mach-rc32434/rc32434.h>
+#include <asm/mach-rc32434/pci.h>
+
+struct pci_reg __iomem *pci_reg;
+EXPORT_SYMBOL(pci_reg);
+
+static struct resource pci0_res[] = {
+ {
+ .name = "pci_reg0",
+ .start = PCI0_BASE_ADDR,
+ .end = PCI0_BASE_ADDR + sizeof(struct pci_reg),
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static void rb_machine_restart(char *command)
+{
+ /* just jump to the reset vector */
+ writel(0x80000001, (void *)KSEG1ADDR(RC32434_REG_BASE + RC32434_RST));
+ ((void (*)(void)) KSEG1ADDR(0x1FC00000u))();
+}
+
+static void rb_machine_halt(void)
+{
+ for (;;)
+ continue;
+}
+
+void __init plat_mem_setup(void)
+{
+ u32 val;
+
+ _machine_restart = rb_machine_restart;
+ _machine_halt = rb_machine_halt;
+ pm_power_off = rb_machine_halt;
+
+ set_io_port_base(KSEG1);
+
+ pci_reg = ioremap_nocache(pci0_res[0].start,
+ pci0_res[0].end - pci0_res[0].start);
+ if (!pci_reg) {
+ printk(KERN_ERR "Could not remap PCI registers\n");
+ return;
+ }
+
+ val = __raw_readl(&pci_reg->pcic);
+ val &= 0xFFFFFF7;
+ __raw_writel(val, (void *)&pci_reg->pcic);
+
+#ifdef CONFIG_PCI
+ /* Enable PCI interrupts in EPLD Mask register */
+ *epld_mask = 0x0;
+ *(epld_mask + 1) = 0x0;
+#endif
+ write_c0_wired(0);
+}
+
+const char *get_system_type(void)
+{
+ switch (mips_machtype) {
+ case MACH_MIKROTIK_RB532A:
+ return "Mikrotik RB532A";
+ break;
+ default:
+ return "Mikrotik RB532";
+ break;
+ }
+}
diff --git a/arch/mips/rb532/time.c b/arch/mips/rb532/time.c
new file mode 100644
index 00000000000..db74edf8cef
--- /dev/null
+++ b/arch/mips/rb532/time.c
@@ -0,0 +1,67 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Setting up the clock on the MIPS boards.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/ptrace.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/mc146818rtc.h>
+#include <linux/irq.h>
+#include <linux/timex.h>
+
+#include <asm/mipsregs.h>
+#include <asm/debug.h>
+#include <asm/time.h>
+#include <asm/mach-rc32434/rc32434.h>
+
+extern unsigned int idt_cpu_freq;
+
+/*
+ * Figure out the r4k offset, the amount to increment the compare
+ * register for each time tick. There is no RTC available.
+ *
+ * The RC32434 counts at half the CPU *core* speed.
+ */
+static unsigned long __init cal_r4koff(void)
+{
+ mips_hpt_frequency = idt_cpu_freq * IDT_CLOCK_MULT / 2;
+
+ return mips_hpt_frequency / HZ;
+}
+
+void __init plat_time_init(void)
+{
+ unsigned int est_freq, flags;
+ unsigned long r4k_offset;
+
+ local_irq_save(flags);
+
+ printk(KERN_INFO "calculating r4koff... ");
+ r4k_offset = cal_r4koff();
+ printk("%08lx(%d)\n", r4k_offset, (int) r4k_offset);
+
+ est_freq = 2 * r4k_offset * HZ;
+ est_freq += 5000; /* round */
+ est_freq -= est_freq % 10000;
+ printk(KERN_INFO "CPU frequency %d.%02d MHz\n", est_freq / 1000000,
+ (est_freq % 1000000) * 100 / 1000000);
+ local_irq_restore(flags);
+}