summaryrefslogtreecommitdiffstats
path: root/arch/mips
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips')
-rw-r--r--arch/mips/Kconfig1
-rw-r--r--arch/mips/alchemy/common/time.c3
-rw-r--r--arch/mips/cavium-octeon/csrc-octeon.c3
-rw-r--r--arch/mips/include/asm/i8253.h5
-rw-r--r--arch/mips/include/asm/time.h6
-rw-r--r--arch/mips/jz4740/time.c3
-rw-r--r--arch/mips/kernel/cevt-txx9.c3
-rw-r--r--arch/mips/kernel/csrc-bcm1480.c3
-rw-r--r--arch/mips/kernel/csrc-ioasic.c4
-rw-r--r--arch/mips/kernel/csrc-powertv.c35
-rw-r--r--arch/mips/kernel/csrc-r4k.c4
-rw-r--r--arch/mips/kernel/csrc-sb1250.c3
-rw-r--r--arch/mips/kernel/i8253.c78
-rw-r--r--arch/mips/loongson/common/cs5536/cs5536_mfgpt.c5
-rw-r--r--arch/mips/sgi-ip27/ip27-timer.c3
15 files changed, 20 insertions, 139 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 2d1cf974095..cef1a854487 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -2395,6 +2395,7 @@ config MMU
config I8253
bool
+ select CLKSRC_I8253
select MIPS_EXTERNAL_TIMER
config ZONE_DMA32
diff --git a/arch/mips/alchemy/common/time.c b/arch/mips/alchemy/common/time.c
index 2aecb2fdf98..d5da6adbf63 100644
--- a/arch/mips/alchemy/common/time.c
+++ b/arch/mips/alchemy/common/time.c
@@ -141,8 +141,7 @@ static int __init alchemy_time_init(unsigned int m2int)
goto cntr_err;
/* register counter1 clocksource and event device */
- clocksource_set_clock(&au1x_counter1_clocksource, 32768);
- clocksource_register(&au1x_counter1_clocksource);
+ clocksource_register_hz(&au1x_counter1_clocksource, 32768);
cd->shift = 32;
cd->mult = div_sc(32768, NSEC_PER_SEC, cd->shift);
diff --git a/arch/mips/cavium-octeon/csrc-octeon.c b/arch/mips/cavium-octeon/csrc-octeon.c
index 26bf71130bf..29d56afbb02 100644
--- a/arch/mips/cavium-octeon/csrc-octeon.c
+++ b/arch/mips/cavium-octeon/csrc-octeon.c
@@ -105,8 +105,7 @@ unsigned long long notrace sched_clock(void)
void __init plat_time_init(void)
{
clocksource_mips.rating = 300;
- clocksource_set_clock(&clocksource_mips, octeon_get_clock_rate());
- clocksource_register(&clocksource_mips);
+ clocksource_register_hz(&clocksource_mips, octeon_get_clock_rate());
}
static u64 octeon_udelay_factor;
diff --git a/arch/mips/include/asm/i8253.h b/arch/mips/include/asm/i8253.h
index 48bb8237299..9ad011366f7 100644
--- a/arch/mips/include/asm/i8253.h
+++ b/arch/mips/include/asm/i8253.h
@@ -12,8 +12,13 @@
#define PIT_CH0 0x40
#define PIT_CH2 0x42
+#define PIT_LATCH LATCH
+
extern raw_spinlock_t i8253_lock;
extern void setup_pit_timer(void);
+#define inb_pit inb_p
+#define outb_pit outb_p
+
#endif /* __ASM_I8253_H */
diff --git a/arch/mips/include/asm/time.h b/arch/mips/include/asm/time.h
index c7f1bfef157..bc14447e69b 100644
--- a/arch/mips/include/asm/time.h
+++ b/arch/mips/include/asm/time.h
@@ -84,12 +84,6 @@ static inline int init_mips_clocksource(void)
#endif
}
-static inline void clocksource_set_clock(struct clocksource *cs,
- unsigned int clock)
-{
- clocksource_calc_mult_shift(cs, clock, 4);
-}
-
static inline void clockevent_set_clock(struct clock_event_device *cd,
unsigned int clock)
{
diff --git a/arch/mips/jz4740/time.c b/arch/mips/jz4740/time.c
index eaa853a54af..f83c2dd07a2 100644
--- a/arch/mips/jz4740/time.c
+++ b/arch/mips/jz4740/time.c
@@ -121,8 +121,7 @@ void __init plat_time_init(void)
clockevents_register_device(&jz4740_clockevent);
- clocksource_set_clock(&jz4740_clocksource, clk_rate);
- ret = clocksource_register(&jz4740_clocksource);
+ ret = clocksource_register_hz(&jz4740_clocksource, clk_rate);
if (ret)
printk(KERN_ERR "Failed to register clocksource: %d\n", ret);
diff --git a/arch/mips/kernel/cevt-txx9.c b/arch/mips/kernel/cevt-txx9.c
index 0b7377361e2..f0ab92a1b05 100644
--- a/arch/mips/kernel/cevt-txx9.c
+++ b/arch/mips/kernel/cevt-txx9.c
@@ -51,8 +51,7 @@ void __init txx9_clocksource_init(unsigned long baseaddr,
{
struct txx9_tmr_reg __iomem *tmrptr;
- clocksource_set_clock(&txx9_clocksource.cs, TIMER_CLK(imbusclk));
- clocksource_register(&txx9_clocksource.cs);
+ clocksource_register_hz(&txx9_clocksource.cs, TIMER_CLK(imbusclk));
tmrptr = ioremap(baseaddr, sizeof(struct txx9_tmr_reg));
__raw_writel(TCR_BASE, &tmrptr->tcr);
diff --git a/arch/mips/kernel/csrc-bcm1480.c b/arch/mips/kernel/csrc-bcm1480.c
index 51489f8a825..f96f99c794a 100644
--- a/arch/mips/kernel/csrc-bcm1480.c
+++ b/arch/mips/kernel/csrc-bcm1480.c
@@ -49,6 +49,5 @@ void __init sb1480_clocksource_init(void)
plldiv = G_BCM1480_SYS_PLL_DIV(__raw_readq(IOADDR(A_SCD_SYSTEM_CFG)));
zbbus = ((plldiv >> 1) * 50000000) + ((plldiv & 1) * 25000000);
- clocksource_set_clock(cs, zbbus);
- clocksource_register(cs);
+ clocksource_register_hz(cs, zbbus);
}
diff --git a/arch/mips/kernel/csrc-ioasic.c b/arch/mips/kernel/csrc-ioasic.c
index 23da108506b..46bd7fa98d6 100644
--- a/arch/mips/kernel/csrc-ioasic.c
+++ b/arch/mips/kernel/csrc-ioasic.c
@@ -59,7 +59,5 @@ void __init dec_ioasic_clocksource_init(void)
printk(KERN_INFO "I/O ASIC clock frequency %dHz\n", freq);
clocksource_dec.rating = 200 + freq / 10000000;
- clocksource_set_clock(&clocksource_dec, freq);
-
- clocksource_register(&clocksource_dec);
+ clocksource_register_hz(&clocksource_dec, freq);
}
diff --git a/arch/mips/kernel/csrc-powertv.c b/arch/mips/kernel/csrc-powertv.c
index a27c16c8690..2e7c5232da8 100644
--- a/arch/mips/kernel/csrc-powertv.c
+++ b/arch/mips/kernel/csrc-powertv.c
@@ -78,9 +78,7 @@ static void __init powertv_c0_hpt_clocksource_init(void)
clocksource_mips.rating = 200 + mips_hpt_frequency / 10000000;
- clocksource_set_clock(&clocksource_mips, mips_hpt_frequency);
-
- clocksource_register(&clocksource_mips);
+ clocksource_register_hz(&clocksource_mips, mips_hpt_frequency);
}
/**
@@ -130,43 +128,16 @@ static struct clocksource clocksource_tim_c = {
/**
* powertv_tim_c_clocksource_init - set up a clock source for the TIM_C clock
*
- * The hard part here is coming up with a constant k and shift s such that
- * the 48-bit TIM_C value multiplied by k doesn't overflow and that value,
- * when shifted right by s, yields the corresponding number of nanoseconds.
* We know that TIM_C counts at 27 MHz/8, so each cycle corresponds to
- * 1 / (27,000,000/8) seconds. Multiply that by a billion and you get the
- * number of nanoseconds. Since the TIM_C value has 48 bits and the math is
- * done in 64 bits, avoiding an overflow means that k must be less than
- * 64 - 48 = 16 bits.
+ * 1 / (27,000,000/8) seconds.
*/
static void __init powertv_tim_c_clocksource_init(void)
{
- int prescale;
- unsigned long dividend;
- unsigned long k;
- int s;
- const int max_k_bits = (64 - 48) - 1;
- const unsigned long billion = 1000000000;
const unsigned long counts_per_second = 27000000 / 8;
- prescale = BITS_PER_LONG - ilog2(billion) - 1;
- dividend = billion << prescale;
- k = dividend / counts_per_second;
- s = ilog2(k) - max_k_bits;
-
- if (s < 0)
- s = prescale;
-
- else {
- k >>= s;
- s += prescale;
- }
-
- clocksource_tim_c.mult = k;
- clocksource_tim_c.shift = s;
clocksource_tim_c.rating = 200;
- clocksource_register(&clocksource_tim_c);
+ clocksource_register_hz(&clocksource_tim_c, counts_per_second);
tim_c = (struct tim_c *) asic_reg_addr(tim_ch);
}
diff --git a/arch/mips/kernel/csrc-r4k.c b/arch/mips/kernel/csrc-r4k.c
index e95a3cd48ee..decd1fa38d5 100644
--- a/arch/mips/kernel/csrc-r4k.c
+++ b/arch/mips/kernel/csrc-r4k.c
@@ -30,9 +30,7 @@ int __init init_r4k_clocksource(void)
/* Calculate a somewhat reasonable rating value */
clocksource_mips.rating = 200 + mips_hpt_frequency / 10000000;
- clocksource_set_clock(&clocksource_mips, mips_hpt_frequency);
-
- clocksource_register(&clocksource_mips);
+ clocksource_register_hz(&clocksource_mips, mips_hpt_frequency);
return 0;
}
diff --git a/arch/mips/kernel/csrc-sb1250.c b/arch/mips/kernel/csrc-sb1250.c
index d14d3d1907f..e9606d90768 100644
--- a/arch/mips/kernel/csrc-sb1250.c
+++ b/arch/mips/kernel/csrc-sb1250.c
@@ -65,6 +65,5 @@ void __init sb1250_clocksource_init(void)
IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM,
R_SCD_TIMER_CFG)));
- clocksource_set_clock(cs, V_SCD_TIMER_FREQ);
- clocksource_register(cs);
+ clocksource_register_hz(cs, V_SCD_TIMER_FREQ);
}
diff --git a/arch/mips/kernel/i8253.c b/arch/mips/kernel/i8253.c
index 2392a7a296d..391221b6a6a 100644
--- a/arch/mips/kernel/i8253.c
+++ b/arch/mips/kernel/i8253.c
@@ -125,87 +125,11 @@ void __init setup_pit_timer(void)
setup_irq(0, &irq0);
}
-/*
- * Since the PIT overflows every tick, its not very useful
- * to just read by itself. So use jiffies to emulate a free
- * running counter:
- */
-static cycle_t pit_read(struct clocksource *cs)
-{
- unsigned long flags;
- int count;
- u32 jifs;
- static int old_count;
- static u32 old_jifs;
-
- raw_spin_lock_irqsave(&i8253_lock, flags);
- /*
- * Although our caller may have the read side of xtime_lock,
- * this is now a seqlock, and we are cheating in this routine
- * by having side effects on state that we cannot undo if
- * there is a collision on the seqlock and our caller has to
- * retry. (Namely, old_jifs and old_count.) So we must treat
- * jiffies as volatile despite the lock. We read jiffies
- * before latching the timer count to guarantee that although
- * the jiffies value might be older than the count (that is,
- * the counter may underflow between the last point where
- * jiffies was incremented and the point where we latch the
- * count), it cannot be newer.
- */
- jifs = jiffies;
- outb_p(0x00, PIT_MODE); /* latch the count ASAP */
- count = inb_p(PIT_CH0); /* read the latched count */
- count |= inb_p(PIT_CH0) << 8;
-
- /* VIA686a test code... reset the latch if count > max + 1 */
- if (count > LATCH) {
- outb_p(0x34, PIT_MODE);
- outb_p(LATCH & 0xff, PIT_CH0);
- outb(LATCH >> 8, PIT_CH0);
- count = LATCH - 1;
- }
-
- /*
- * It's possible for count to appear to go the wrong way for a
- * couple of reasons:
- *
- * 1. The timer counter underflows, but we haven't handled the
- * resulting interrupt and incremented jiffies yet.
- * 2. Hardware problem with the timer, not giving us continuous time,
- * the counter does small "jumps" upwards on some Pentium systems,
- * (see c't 95/10 page 335 for Neptun bug.)
- *
- * Previous attempts to handle these cases intelligently were
- * buggy, so we just do the simple thing now.
- */
- if (count > old_count && jifs == old_jifs) {
- count = old_count;
- }
- old_count = count;
- old_jifs = jifs;
-
- raw_spin_unlock_irqrestore(&i8253_lock, flags);
-
- count = (LATCH - 1) - count;
-
- return (cycle_t)(jifs * LATCH) + count;
-}
-
-static struct clocksource clocksource_pit = {
- .name = "pit",
- .rating = 110,
- .read = pit_read,
- .mask = CLOCKSOURCE_MASK(32),
- .mult = 0,
- .shift = 20,
-};
-
static int __init init_pit_clocksource(void)
{
if (num_possible_cpus() > 1) /* PIT does not scale! */
return 0;
- clocksource_pit.mult = clocksource_hz2mult(CLOCK_TICK_RATE, 20);
- return clocksource_register(&clocksource_pit);
+ return clocksource_i8253_init();
}
arch_initcall(init_pit_clocksource);
diff --git a/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c b/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c
index 8c807c96519..0cb1b9760e3 100644
--- a/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c
+++ b/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c
@@ -201,8 +201,6 @@ static struct clocksource clocksource_mfgpt = {
.rating = 120, /* Functional for real use, but not desired */
.read = mfgpt_read,
.mask = CLOCKSOURCE_MASK(32),
- .mult = 0,
- .shift = 22,
};
int __init init_mfgpt_clocksource(void)
@@ -210,8 +208,7 @@ int __init init_mfgpt_clocksource(void)
if (num_possible_cpus() > 1) /* MFGPT does not scale! */
return 0;
- clocksource_mfgpt.mult = clocksource_hz2mult(MFGPT_TICK_RATE, 22);
- return clocksource_register(&clocksource_mfgpt);
+ return clocksource_register_hz(&clocksource_mfgpt, MFGPT_TICK_RATE);
}
arch_initcall(init_mfgpt_clocksource);
diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c
index 3f810c9cbf8..ef74f3267f9 100644
--- a/arch/mips/sgi-ip27/ip27-timer.c
+++ b/arch/mips/sgi-ip27/ip27-timer.c
@@ -163,8 +163,7 @@ static void __init hub_rt_clocksource_init(void)
{
struct clocksource *cs = &hub_rt_clocksource;
- clocksource_set_clock(cs, CYCLES_PER_SEC);
- clocksource_register(cs);
+ clocksource_register_hz(cs, CYCLES_PER_SEC);
}
void __init plat_time_init(void)
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-22 05:08:56 +0000