1 files changed, 1 insertions, 108 deletions
diff --git a/arch/mn10300/include/asm/system.h b/arch/mn10300/include/asm/system.h
index 3636c054dcd..9f7c7e17c01 100644
--- a/arch/mn10300/include/asm/system.h
+++ b/arch/mn10300/include/asm/system.h
@@ -17,6 +17,7 @@
 #ifndef __ASSEMBLY__
 
 #include <linux/kernel.h>
+#include <linux/irqflags.h>
 
 struct task_struct;
 struct thread_struct;
@@ -81,114 +82,6 @@ do {									\
 
 /*****************************************************************************/
 /*
- * interrupt control
- * - "disabled": run in IM1/2
- *   - level 0 - GDB stub
- *   - level 1 - virtual serial DMA (if present)
- *   - level 5 - normal interrupt priority
- *   - level 6 - timer interrupt
- * - "enabled":  run in IM7
- */
-#ifdef CONFIG_MN10300_TTYSM
-#define MN10300_CLI_LEVEL	EPSW_IM_2
-#else
-#define MN10300_CLI_LEVEL	EPSW_IM_1
-#endif
-
-#define local_save_flags(x)			\
-do {						\
-	typecheck(unsigned long, x);		\
-	asm volatile(				\
-		"	mov epsw,%0	\n"	\
-		: "=d"(x)			\
-		);				\
-} while (0)
-
-#define local_irq_disable()						\
-do {									\
-	asm volatile(							\
-		"	and %0,epsw	\n"				\
-		"	or %1,epsw	\n"				\
-		"	nop		\n"				\
-		"	nop		\n"				\
-		"	nop		\n"				\
-		:							\
-		: "i"(~EPSW_IM), "i"(EPSW_IE | MN10300_CLI_LEVEL)	\
-		);							\
-} while (0)
-
-#define local_irq_save(x)			\
-do {						\
-	local_save_flags(x);			\
-	local_irq_disable();			\
-} while (0)
-
-/*
- * we make sure local_irq_enable() doesn't cause priority inversion
- */
-#ifndef __ASSEMBLY__
-
-extern unsigned long __mn10300_irq_enabled_epsw;
-
-#endif
-
-#define local_irq_enable()						\
-do {									\
-	unsigned long tmp;						\
-									\
-	asm volatile(							\
-		"	mov	epsw,%0		\n"			\
-		"	and	%1,%0		\n"			\
-		"	or	%2,%0		\n"			\
-		"	mov	%0,epsw		\n"			\
-		: "=&d"(tmp)						\
-		: "i"(~EPSW_IM), "r"(__mn10300_irq_enabled_epsw)	\
-		: "cc"							\
-		);							\
-} while (0)
-
-#define local_irq_restore(x)			\
-do {						\
-	typecheck(unsigned long, x);		\
-	asm volatile(				\
-		"	mov %0,epsw	\n"	\
-		"	nop		\n"	\
-		"	nop		\n"	\
-		"	nop		\n"	\
-		:				\
-		: "d"(x)			\
-		: "memory", "cc"		\
-		);				\
-} while (0)
-
-#define irqs_disabled()				\
-({						\
-	unsigned long flags;			\
-	local_save_flags(flags);		\
-	(flags & EPSW_IM) <= MN10300_CLI_LEVEL;	\
-})
-
-/* hook to save power by halting the CPU
- * - called from the idle loop
- * - must reenable interrupts (which takes three instruction cycles to complete)
- */
-#define safe_halt()							\
-do {									\
-	asm volatile("	or	%0,epsw	\n"				\
-		     "	nop		\n"				\
-		     "	nop		\n"				\
-		     "	bset	%2,(%1)	\n"				\
-		     :							\
-		     : "i"(EPSW_IE|EPSW_IM), "n"(&CPUM), "i"(CPUM_SLEEP)\
-		     : "cc"						\
-		     );							\
-} while (0)
-
-#define STI	or EPSW_IE|EPSW_IM,epsw
-#define CLI	and ~EPSW_IM,epsw; or EPSW_IE|MN10300_CLI_LEVEL,epsw; nop; nop; nop
-
-/*****************************************************************************/
-/*
  * MN10300 doesn't actually have an exchange instruction
  */
 #ifndef __ASSEMBLY__