diff options
Diffstat (limited to 'arch/mn10300/kernel/entry.S')
| -rw-r--r-- | arch/mn10300/kernel/entry.S | 146 |
1 files changed, 98 insertions, 48 deletions
diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S index 3d394b4eefb..f00b9bafcd3 100644 --- a/arch/mn10300/kernel/entry.S +++ b/arch/mn10300/kernel/entry.S @@ -28,25 +28,17 @@ #include <asm/asm-offsets.h> #include <asm/frame.inc> +#if defined(CONFIG_SMP) && defined(CONFIG_GDBSTUB) +#include <asm/gdb-stub.h> +#endif /* CONFIG_SMP && CONFIG_GDBSTUB */ + #ifdef CONFIG_PREEMPT -#define preempt_stop __cli +#define preempt_stop LOCAL_IRQ_DISABLE #else #define preempt_stop #define resume_kernel restore_all #endif - .macro __cli - and ~EPSW_IM,epsw - or EPSW_IE|MN10300_CLI_LEVEL,epsw - nop - nop - nop - .endm - .macro __sti - or EPSW_IE|EPSW_IM_7,epsw - .endm - - .am33_2 ############################################################################### @@ -88,7 +80,7 @@ syscall_call: syscall_exit: # make sure we don't miss an interrupt setting need_resched or # sigpending between sampling and the rti - __cli + LOCAL_IRQ_DISABLE mov (TI_flags,a2),d2 btst _TIF_ALLWORK_MASK,d2 bne syscall_exit_work @@ -105,7 +97,7 @@ restore_all: syscall_exit_work: btst _TIF_SYSCALL_TRACE,d2 beq work_pending - __sti # could let syscall_trace_exit() call + LOCAL_IRQ_ENABLE # could let syscall_trace_exit() call # schedule() instead mov fp,d0 call syscall_trace_exit[],0 # do_syscall_trace(regs) @@ -121,7 +113,7 @@ work_resched: # make sure we don't miss an interrupt setting need_resched or # sigpending between sampling and the rti - __cli + LOCAL_IRQ_DISABLE # is there any work to be done other than syscall tracing? mov (TI_flags,a2),d2 @@ -168,7 +160,7 @@ ret_from_intr: ENTRY(resume_userspace) # make sure we don't miss an interrupt setting need_resched or # sigpending between sampling and the rti - __cli + LOCAL_IRQ_DISABLE # is there any work to be done on int/exception return? mov (TI_flags,a2),d2 @@ -178,7 +170,7 @@ ENTRY(resume_userspace) #ifdef CONFIG_PREEMPT ENTRY(resume_kernel) - __cli + LOCAL_IRQ_DISABLE mov (TI_preempt_count,a2),d0 # non-zero preempt_count ? cmp 0,d0 bne restore_all @@ -216,31 +208,6 @@ ENTRY(irq_handler) ############################################################################### # -# Monitor Signal handler entry point -# -############################################################################### -ENTRY(monitor_signal) - movbu (0xae000001),d1 - cmp 1,d1 - beq monsignal - ret [],0 - -monsignal: - or EPSW_NMID,epsw - mov d0,a0 - mov a0,sp - mov (REG_EPSW,fp),d1 - and ~EPSW_nSL,d1 - mov d1,(REG_EPSW,fp) - movm (sp),[d2,d3,a2,a3,exreg0,exreg1,exother] - mov (sp),a1 - mov a1,usp - movm (sp),[other] - add 4,sp -here: jmp 0x8e000008-here+0x8e000008 - -############################################################################### -# # Double Fault handler entry point # - note that there will not be a stack, D0/A0 will hold EPSW/PC as were # @@ -276,6 +243,10 @@ double_fault_loop: ENTRY(raw_bus_error) add -4,sp mov d0,(sp) +#if defined(CONFIG_ERRATUM_NEED_TO_RELOAD_MMUCTR) + mov (MMUCTR),d0 + mov d0,(MMUCTR) +#endif mov (BCBERR),d0 # what btst BCBERR_BEMR_DMA,d0 # see if it was an external bus error beq __common_exception_aux # it wasn't @@ -302,11 +273,88 @@ ENTRY(nmi_handler) add -4,sp mov d0,(sp) mov (TBR),d0 + +#ifdef CONFIG_SMP + add -4,sp + mov d0,(sp) # save d0(TBR) + movhu (NMIAGR),d0 + and NMIAGR_GN,d0 + lsr 0x2,d0 + cmp CALL_FUNCTION_NMI_IPI,d0 + bne 5f # if not call function, jump + + # function call nmi ipi + add 4,sp # no need to store TBR + mov GxICR_DETECT,d0 # clear NMI request + movbu d0,(GxICR(CALL_FUNCTION_NMI_IPI)) + movhu (GxICR(CALL_FUNCTION_NMI_IPI)),d0 + and ~EPSW_NMID,epsw # enable NMI + + mov (sp),d0 # restore d0 + SAVE_ALL + call smp_nmi_call_function_interrupt[],0 + RESTORE_ALL + +5: +#ifdef CONFIG_GDBSTUB + cmp GDB_NMI_IPI,d0 + bne 3f # if not gdb nmi ipi, jump + + # gdb nmi ipi + add 4,sp # no need to store TBR + mov GxICR_DETECT,d0 # clear NMI + movbu d0,(GxICR(GDB_NMI_IPI)) + movhu (GxICR(GDB_NMI_IPI)),d0 + and ~EPSW_NMID,epsw # enable NMI +#ifdef CONFIG_MN10300_CACHE_ENABLED + mov (gdbstub_nmi_opr_type),d0 + cmp GDBSTUB_NMI_CACHE_PURGE,d0 + bne 4f # if not gdb cache purge, jump + + # gdb cache purge nmi ipi + add -20,sp + mov d1,(4,sp) + mov a0,(8,sp) + mov a1,(12,sp) + mov mdr,d0 + mov d0,(16,sp) + call gdbstub_local_purge_cache[],0 + mov 0x1,d0 + mov (CPUID),d1 + asl d1,d0 + mov gdbstub_nmi_cpumask,a0 + bclr d0,(a0) + mov (4,sp),d1 + mov (8,sp),a0 + mov (12,sp),a1 + mov (16,sp),d0 + mov d0,mdr + add 20,sp + mov (sp),d0 + add 4,sp + rti +4: +#endif /* CONFIG_MN10300_CACHE_ENABLED */ + # gdb wait nmi ipi + mov (sp),d0 + SAVE_ALL + call gdbstub_nmi_wait[],0 + RESTORE_ALL +3: +#endif /* CONFIG_GDBSTUB */ + mov (sp),d0 # restore TBR to d0 + add 4,sp +#endif /* CONFIG_SMP */ + bra __common_exception_nonmi ENTRY(__common_exception) add -4,sp mov d0,(sp) +#if defined(CONFIG_ERRATUM_NEED_TO_RELOAD_MMUCTR) + mov (MMUCTR),d0 + mov d0,(MMUCTR) +#endif __common_exception_aux: mov (TBR),d0 @@ -331,15 +379,21 @@ __common_exception_nonmi: mov d0,(REG_ORIG_D0,fp) #ifdef CONFIG_GDBSTUB +#ifdef CONFIG_SMP + call gdbstub_busy_check[],0 + and d0,d0 # check return value + beq 2f +#else /* CONFIG_SMP */ btst 0x01,(gdbstub_busy) beq 2f +#endif /* CONFIG_SMP */ and ~EPSW_IE,epsw mov fp,d0 mov a2,d1 call gdbstub_exception[],0 # gdbstub itself caused an exception bra restore_all 2: -#endif +#endif /* CONFIG_GDBSTUB */ mov fp,d0 # arg 0: stacked register file mov a2,d1 # arg 1: exception number @@ -374,11 +428,7 @@ ENTRY(set_excp_vector) add exception_table,d0 mov d1,(d0) mov 4,d1 -#if defined(CONFIG_MN10300_CACHE_WBACK) - jmp mn10300_dcache_flush_inv_range2 -#else ret [],0 -#endif ############################################################################### # |