diff options
Diffstat (limited to 'arch/mn10300/mm/tlb-mn10300.S')
| -rw-r--r-- | arch/mn10300/mm/tlb-mn10300.S | 207 |
1 files changed, 207 insertions, 0 deletions
diff --git a/arch/mn10300/mm/tlb-mn10300.S b/arch/mn10300/mm/tlb-mn10300.S new file mode 100644 index 00000000000..789208094e9 --- /dev/null +++ b/arch/mn10300/mm/tlb-mn10300.S @@ -0,0 +1,207 @@ +############################################################################### +# +# TLB loading functions +# +# Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. +# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. +# Modified by David Howells (dhowells@redhat.com) +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public Licence +# as published by the Free Software Foundation; either version +# 2 of the Licence, or (at your option) any later version. +# +############################################################################### +#include <linux/sys.h> +#include <linux/linkage.h> +#include <asm/smp.h> +#include <asm/intctl-regs.h> +#include <asm/frame.inc> +#include <asm/page.h> +#include <asm/pgtable.h> + +############################################################################### +# +# Instruction TLB Miss handler entry point +# +############################################################################### + .type itlb_miss,@function +ENTRY(itlb_miss) + and ~EPSW_NMID,epsw +#ifdef CONFIG_GDBSTUB + movm [d2,d3,a2],(sp) +#else + or EPSW_nAR,epsw # switch D0-D3 & A0-A3 to the alternate + # register bank + nop + nop + nop +#endif + + mov (IPTEU),d3 + mov (PTBR),a2 + mov d3,d2 + and 0xffc00000,d2 + lsr 20,d2 + mov (a2,d2),a2 # PTD *ptd = PGD[addr 31..22] + btst _PAGE_VALID,a2 + beq itlb_miss_fault # jump if doesn't point anywhere + + and ~(PAGE_SIZE-1),a2 + mov d3,d2 + and 0x003ff000,d2 + lsr 10,d2 + add d2,a2 + mov (a2),d2 # get pte from PTD[addr 21..12] + btst _PAGE_VALID,d2 + beq itlb_miss_fault # jump if doesn't point to a page + # (might be a swap id) + bset _PAGE_ACCESSED,(0,a2) + and ~(xPTEL_UNUSED1|xPTEL_UNUSED2),d2 +itlb_miss_set: + mov d2,(IPTEL) # change the TLB +#ifdef CONFIG_GDBSTUB + movm (sp),[d2,d3,a2] +#endif + rti + +itlb_miss_fault: + mov _PAGE_VALID,d2 # force address error handler to be + # invoked + bra itlb_miss_set + + .size itlb_miss, . - itlb_miss + +############################################################################### +# +# Data TLB Miss handler entry point +# +############################################################################### + .type dtlb_miss,@function +ENTRY(dtlb_miss) + and ~EPSW_NMID,epsw +#ifdef CONFIG_GDBSTUB + movm [d2,d3,a2],(sp) +#else + or EPSW_nAR,epsw # switch D0-D3 & A0-A3 to the alternate + # register bank + nop + nop + nop +#endif + + mov (DPTEU),d3 + mov (PTBR),a2 + mov d3,d2 + and 0xffc00000,d2 + lsr 20,d2 + mov (a2,d2),a2 # PTD *ptd = PGD[addr 31..22] + btst _PAGE_VALID,a2 + beq dtlb_miss_fault # jump if doesn't point anywhere + + and ~(PAGE_SIZE-1),a2 + mov d3,d2 + and 0x003ff000,d2 + lsr 10,d2 + add d2,a2 + mov (a2),d2 # get pte from PTD[addr 21..12] + btst _PAGE_VALID,d2 + beq dtlb_miss_fault # jump if doesn't point to a page + # (might be a swap id) + bset _PAGE_ACCESSED,(0,a2) + and ~(xPTEL_UNUSED1|xPTEL_UNUSED2),d2 +dtlb_miss_set: + mov d2,(DPTEL) # change the TLB +#ifdef CONFIG_GDBSTUB + movm (sp),[d2,d3,a2] +#endif + rti + +dtlb_miss_fault: + mov _PAGE_VALID,d2 # force address error handler to be + # invoked + bra dtlb_miss_set + .size dtlb_miss, . - dtlb_miss + +############################################################################### +# +# Instruction TLB Address Error handler entry point +# +############################################################################### + .type itlb_aerror,@function +ENTRY(itlb_aerror) + and ~EPSW_NMID,epsw + add -4,sp + SAVE_ALL + add -4,sp # need to pass three params + + # calculate the fault code + movhu (MMUFCR_IFC),d1 + or 0x00010000,d1 # it's an instruction fetch + + # determine the page address + mov (IPTEU),a2 + mov a2,d0 + and PAGE_MASK,d0 + mov d0,(12,sp) + + clr d0 + mov d0,(IPTEL) + + and ~EPSW_NMID,epsw + or EPSW_IE,epsw + mov fp,d0 + call do_page_fault[],0 # do_page_fault(regs,code,addr + + jmp ret_from_exception + .size itlb_aerror, . - itlb_aerror + +############################################################################### +# +# Data TLB Address Error handler entry point +# +############################################################################### + .type dtlb_aerror,@function +ENTRY(dtlb_aerror) + and ~EPSW_NMID,epsw + add -4,sp + mov d1,(sp) + + movhu (MMUFCR_DFC),d1 # is it the initial valid write + # to this page? + and MMUFCR_xFC_INITWR,d1 + beq dtlb_pagefault # jump if not + + mov (DPTEL),d1 # set the dirty bit + # (don't replace with BSET!) + or _PAGE_DIRTY,d1 + mov d1,(DPTEL) + mov (sp),d1 + add 4,sp + rti + + ALIGN +dtlb_pagefault: + mov (sp),d1 + SAVE_ALL + add -4,sp # need to pass three params + + # calculate the fault code + movhu (MMUFCR_DFC),d1 + + # determine the page address + mov (DPTEU),a2 + mov a2,d0 + and PAGE_MASK,d0 + mov d0,(12,sp) + + clr d0 + mov d0,(DPTEL) + + and ~EPSW_NMID,epsw + or EPSW_IE,epsw + mov fp,d0 + call do_page_fault[],0 # do_page_fault(regs,code,addr + + jmp ret_from_exception + .size dtlb_aerror, . - dtlb_aerror |