diff options
Diffstat (limited to 'arch/mn10300/unit-asb2305')
| -rw-r--r-- | arch/mn10300/unit-asb2305/include/unit/clock.h | 45 | ||||
| -rw-r--r-- | arch/mn10300/unit-asb2305/include/unit/leds.h | 51 | ||||
| -rw-r--r-- | arch/mn10300/unit-asb2305/include/unit/serial.h | 120 | ||||
| -rw-r--r-- | arch/mn10300/unit-asb2305/include/unit/timex.h | 135 | ||||
| -rw-r--r-- | arch/mn10300/unit-asb2305/leds.c | 2 | ||||
| -rw-r--r-- | arch/mn10300/unit-asb2305/unit-init.c | 2 |
6 files changed, 353 insertions, 2 deletions
diff --git a/arch/mn10300/unit-asb2305/include/unit/clock.h b/arch/mn10300/unit-asb2305/include/unit/clock.h new file mode 100644 index 00000000000..7d514841ffd --- /dev/null +++ b/arch/mn10300/unit-asb2305/include/unit/clock.h @@ -0,0 +1,45 @@ +/* ASB2305-specific clocks + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _ASM_UNIT_CLOCK_H +#define _ASM_UNIT_CLOCK_H + +#ifndef __ASSEMBLY__ + +#ifdef CONFIG_MN10300_RTC + +extern unsigned long mn10300_ioclk; /* IOCLK (crystal speed) in HZ */ +extern unsigned long mn10300_iobclk; +extern unsigned long mn10300_tsc_per_HZ; + +#define MN10300_IOCLK ((unsigned long)mn10300_ioclk) +/* If this processors has a another clock, uncomment the below. */ +/* #define MN10300_IOBCLK ((unsigned long)mn10300_iobclk) */ + +#else /* !CONFIG_MN10300_RTC */ + +#define MN10300_IOCLK 33333333UL +/* #define MN10300_IOBCLK 66666666UL */ + +#endif /* !CONFIG_MN10300_RTC */ + +#define MN10300_JCCLK MN10300_IOCLK +#define MN10300_TSCCLK MN10300_IOCLK + +#ifdef CONFIG_MN10300_RTC +#define MN10300_TSC_PER_HZ ((unsigned long)mn10300_tsc_per_HZ) +#else /* !CONFIG_MN10300_RTC */ +#define MN10300_TSC_PER_HZ (MN10300_TSCCLK/HZ) +#endif /* !CONFIG_MN10300_RTC */ + +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_UNIT_CLOCK_H */ diff --git a/arch/mn10300/unit-asb2305/include/unit/leds.h b/arch/mn10300/unit-asb2305/include/unit/leds.h new file mode 100644 index 00000000000..bc471f617fd --- /dev/null +++ b/arch/mn10300/unit-asb2305/include/unit/leds.h @@ -0,0 +1,51 @@ +/* ASB2305-specific LEDs + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _ASM_UNIT_LEDS_H +#define _ASM_UNIT_LEDS_H + +#include <asm/pio-regs.h> +#include <asm/cpu-regs.h> +#include <asm/exceptions.h> + +#define ASB2305_7SEGLEDS __SYSREG(0xA6F90000, u32) + +/* perform a hard reset by driving PIO06 low */ +#define mn10300_unit_hard_reset() \ +do { \ + P0OUT &= 0xbf; \ + P0MD = (P0MD & P0MD_6) | P0MD_6_OUT; \ +} while (0) + +/* + * use the 7-segment LEDs to indicate states + */ +/* indicate double-fault by displaying "db-f" on the LEDs */ +#define mn10300_set_dbfleds \ + mov 0x43077f1d,d0 ; \ + mov d0,(ASB2305_7SEGLEDS) + +/* flip the 7-segment LEDs between "Gdb-" and "----" */ +#define mn10300_set_gdbleds(ONOFF) \ +do { \ + ASB2305_7SEGLEDS = (ONOFF) ? 0x8543077f : 0x7f7f7f7f; \ +} while (0) + +#ifndef __ASSEMBLY__ +extern void peripheral_leds_display_exception(enum exception_code); +extern void peripheral_leds_led_chase(void); +extern void peripheral_leds7x4_display_dec(unsigned int, unsigned int); +extern void peripheral_leds7x4_display_hex(unsigned int, unsigned int); +extern void peripheral_leds7x4_display_minssecs(unsigned int, unsigned int); +extern void peripheral_leds7x4_display_rtc(void); +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_UNIT_LEDS_H */ diff --git a/arch/mn10300/unit-asb2305/include/unit/serial.h b/arch/mn10300/unit-asb2305/include/unit/serial.h new file mode 100644 index 00000000000..3bfc9093878 --- /dev/null +++ b/arch/mn10300/unit-asb2305/include/unit/serial.h @@ -0,0 +1,120 @@ +/* ASB2305-specific 8250 serial ports + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_UNIT_SERIAL_H +#define _ASM_UNIT_SERIAL_H + +#include <asm/cpu/cpu-regs.h> +#include <proc/irq.h> +#include <linux/serial_reg.h> + +#define SERIAL_PORT0_BASE_ADDRESS 0xA6FB0000 +#define ASB2305_DEBUG_MCR __SYSREG(0xA6FB0000 + UART_MCR * 2, u8) + +#define SERIAL_IRQ XIRQ0 /* Dual serial (PC16552) (Hi) */ + +/* + * dispose of the /dev/ttyS0 serial port + */ +#ifndef CONFIG_GDBSTUB_ON_TTYSx + +#define SERIAL_PORT_DFNS \ + { \ + .baud_base = BASE_BAUD, \ + .irq = SERIAL_IRQ, \ + .flags = STD_COM_FLAGS, \ + .iomem_base = (u8 *) SERIAL_PORT0_BASE_ADDRESS, \ + .iomem_reg_shift = 2, \ + .io_type = SERIAL_IO_MEM, \ + }, + +#ifndef __ASSEMBLY__ + +static inline void __debug_to_serial(const char *p, int n) +{ +} + +#endif /* !__ASSEMBLY__ */ + +#else /* CONFIG_GDBSTUB_ON_TTYSx */ + +#define SERIAL_PORT_DFNS /* stolen by gdb-stub */ + +#if defined(CONFIG_GDBSTUB_ON_TTYS0) +#define GDBPORT_SERIAL_RX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_RX * 4, u8) +#define GDBPORT_SERIAL_TX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX * 4, u8) +#define GDBPORT_SERIAL_DLL __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLL * 4, u8) +#define GDBPORT_SERIAL_DLM __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLM * 4, u8) +#define GDBPORT_SERIAL_IER __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IER * 4, u8) +#define GDBPORT_SERIAL_IIR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IIR * 4, u8) +#define GDBPORT_SERIAL_FCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_FCR * 4, u8) +#define GDBPORT_SERIAL_LCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LCR * 4, u8) +#define GDBPORT_SERIAL_MCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8) +#define GDBPORT_SERIAL_LSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8) +#define GDBPORT_SERIAL_MSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8) +#define GDBPORT_SERIAL_SCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_SCR * 4, u8) +#define GDBPORT_SERIAL_IRQ SERIAL_IRQ + +#elif defined(CONFIG_GDBSTUB_ON_TTYS1) +#error The ASB2305 doesnt have a /dev/ttyS1 +#endif + +#ifndef __ASSEMBLY__ + +#define TTYS0_TX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX * 4, u8) +#define TTYS0_MCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8) +#define TTYS0_LSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8) +#define TTYS0_MSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8) + +#define LSR_WAIT_FOR(STATE) \ +do { \ + while (!(TTYS0_LSR & UART_LSR_##STATE)) {} \ +} while (0) +#define FLOWCTL_WAIT_FOR(LINE) \ +do { \ + while (!(TTYS0_MSR & UART_MSR_##LINE)) {} \ +} while (0) +#define FLOWCTL_CLEAR(LINE) \ +do { \ + TTYS0_MCR &= ~UART_MCR_##LINE; \ +} while (0) +#define FLOWCTL_SET(LINE) \ +do { \ + TTYS0_MCR |= UART_MCR_##LINE; \ +} while (0) +#define FLOWCTL_QUERY(LINE) ({ TTYS0_MSR & UART_MSR_##LINE; }) + +static inline void __debug_to_serial(const char *p, int n) +{ + char ch; + + FLOWCTL_SET(DTR); + + for (; n > 0; n--) { + LSR_WAIT_FOR(THRE); + FLOWCTL_WAIT_FOR(CTS); + + ch = *p++; + if (ch == 0x0a) { + TTYS0_TX = 0x0d; + LSR_WAIT_FOR(THRE); + FLOWCTL_WAIT_FOR(CTS); + } + TTYS0_TX = ch; + } + + FLOWCTL_CLEAR(DTR); +} + +#endif /* !__ASSEMBLY__ */ + +#endif /* CONFIG_GDBSTUB_ON_TTYSx */ + +#endif /* _ASM_UNIT_SERIAL_H */ diff --git a/arch/mn10300/unit-asb2305/include/unit/timex.h b/arch/mn10300/unit-asb2305/include/unit/timex.h new file mode 100644 index 00000000000..a71c49aa85e --- /dev/null +++ b/arch/mn10300/unit-asb2305/include/unit/timex.h @@ -0,0 +1,135 @@ +/* ASB2305 timer specifcations + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_UNIT_TIMEX_H +#define _ASM_UNIT_TIMEX_H + +#ifndef __ASSEMBLY__ +#include <linux/irq.h> +#endif /* __ASSEMBLY__ */ + +#include <asm/cpu/timer-regs.h> +#include <unit/clock.h> + +/* + * jiffies counter specifications + */ + +#define TMJCBR_MAX 0xffff +#define TMJCBC TM01BC + +#define TMJCMD TM01MD +#define TMJCBR TM01BR +#define TMJCIRQ TM1IRQ +#define TMJCICR TM1ICR +#define TMJCICR_LEVEL GxICR_LEVEL_5 + +#ifndef __ASSEMBLY__ + +static inline void startup_jiffies_counter(void) +{ + unsigned rate; + u16 md, t16; + + /* use as little prescaling as possible to avoid losing accuracy */ + md = TM0MD_SRC_IOCLK; + rate = MN10300_JCCLK / HZ; + + if (rate > TMJCBR_MAX) { + md = TM0MD_SRC_IOCLK_8; + rate = MN10300_JCCLK / 8 / HZ; + + if (rate > TMJCBR_MAX) { + md = TM0MD_SRC_IOCLK_32; + rate = MN10300_JCCLK / 32 / HZ; + + if (rate > TMJCBR_MAX) + BUG(); + } + } + + TMJCBR = rate - 1; + t16 = TMJCBR; + + TMJCMD = + md | + TM1MD_SRC_TM0CASCADE << 8 | + TM0MD_INIT_COUNTER | + TM1MD_INIT_COUNTER << 8; + + TMJCMD = + md | + TM1MD_SRC_TM0CASCADE << 8 | + TM0MD_COUNT_ENABLE | + TM1MD_COUNT_ENABLE << 8; + + t16 = TMJCMD; + + TMJCICR |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST; + t16 = TMJCICR; +} + +static inline void shutdown_jiffies_counter(void) +{ +} + +#endif /* !__ASSEMBLY__ */ + + +/* + * timestamp counter specifications + */ + +#define TMTSCBR_MAX 0xffffffff +#define TMTSCBC TM45BC + +#ifndef __ASSEMBLY__ + +static inline void startup_timestamp_counter(void) +{ + /* set up timer 4 & 5 cascaded as a 32-bit counter to count real time + * - count down from 4Gig-1 to 0 and wrap at IOCLK rate + */ + TM45BR = TMTSCBR_MAX; + + TM4MD = TM4MD_SRC_IOCLK; + TM4MD |= TM4MD_INIT_COUNTER; + TM4MD &= ~TM4MD_INIT_COUNTER; + TM4ICR = 0; + + TM5MD = TM5MD_SRC_TM4CASCADE; + TM5MD |= TM5MD_INIT_COUNTER; + TM5MD &= ~TM5MD_INIT_COUNTER; + TM5ICR = 0; + + TM5MD |= TM5MD_COUNT_ENABLE; + TM4MD |= TM4MD_COUNT_ENABLE; +} + +static inline void shutdown_timestamp_counter(void) +{ + TM4MD = 0; + TM5MD = 0; +} + +/* + * we use a cascaded pair of 16-bit down-counting timers to count I/O + * clock cycles for the purposes of time keeping + */ +typedef unsigned long cycles_t; + +static inline cycles_t read_timestamp_counter(void) +{ + return (cycles_t) TMTSCBC; +} + +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_UNIT_TIMEX_H */ diff --git a/arch/mn10300/unit-asb2305/leds.c b/arch/mn10300/unit-asb2305/leds.c index e99dcc9cee1..d345ff9042d 100644 --- a/arch/mn10300/unit-asb2305/leds.c +++ b/arch/mn10300/unit-asb2305/leds.c @@ -15,7 +15,7 @@ #include <asm/processor.h> #include <asm/cpu/intctl-regs.h> #include <asm/cpu/rtc-regs.h> -#include <asm/unit/leds.h> +#include <unit/leds.h> static const u8 asb2305_led_hex_tbl[16] = { 0x80, 0xf2, 0x48, 0x60, 0x32, 0x24, 0x04, 0xf0, diff --git a/arch/mn10300/unit-asb2305/unit-init.c b/arch/mn10300/unit-asb2305/unit-init.c index 72812a9439a..1c452cc3f6e 100644 --- a/arch/mn10300/unit-asb2305/unit-init.c +++ b/arch/mn10300/unit-asb2305/unit-init.c @@ -18,7 +18,7 @@ #include <asm/cpu/intctl-regs.h> #include <asm/cpu/rtc-regs.h> #include <asm/cpu/serial-regs.h> -#include <asm/unit/serial.h> +#include <unit/serial.h> /* * initialise some of the unit hardware before gdbstub is set up |