diff options
Diffstat (limited to 'arch/parisc/include/asm/ropes.h')
| -rw-r--r-- | arch/parisc/include/asm/ropes.h | 322 |
1 files changed, 322 insertions, 0 deletions
diff --git a/arch/parisc/include/asm/ropes.h b/arch/parisc/include/asm/ropes.h new file mode 100644 index 00000000000..09f51d5ab57 --- /dev/null +++ b/arch/parisc/include/asm/ropes.h @@ -0,0 +1,322 @@ +#ifndef _ASM_PARISC_ROPES_H_ +#define _ASM_PARISC_ROPES_H_ + +#include <asm/parisc-device.h> + +#ifdef CONFIG_64BIT +/* "low end" PA8800 machines use ZX1 chipset: PAT PDC and only run 64-bit */ +#define ZX1_SUPPORT +#endif + +#ifdef CONFIG_PROC_FS +/* depends on proc fs support. But costs CPU performance */ +#undef SBA_COLLECT_STATS +#endif + +/* +** The number of pdir entries to "free" before issuing +** a read to PCOM register to flush out PCOM writes. +** Interacts with allocation granularity (ie 4 or 8 entries +** allocated and free'd/purged at a time might make this +** less interesting). +*/ +#define DELAYED_RESOURCE_CNT 16 + +#define MAX_IOC 2 /* per Ike. Pluto/Astro only have 1. */ +#define ROPES_PER_IOC 8 /* per Ike half or Pluto/Astro */ + +struct ioc { + void __iomem *ioc_hpa; /* I/O MMU base address */ + char *res_map; /* resource map, bit == pdir entry */ + u64 *pdir_base; /* physical base address */ + unsigned long ibase; /* pdir IOV Space base - shared w/lba_pci */ + unsigned long imask; /* pdir IOV Space mask - shared w/lba_pci */ +#ifdef ZX1_SUPPORT + unsigned long iovp_mask; /* help convert IOVA to IOVP */ +#endif + unsigned long *res_hint; /* next avail IOVP - circular search */ + spinlock_t res_lock; + unsigned int res_bitshift; /* from the LEFT! */ + unsigned int res_size; /* size of resource map in bytes */ +#ifdef SBA_HINT_SUPPORT +/* FIXME : DMA HINTs not used */ + unsigned long hint_mask_pdir; /* bits used for DMA hints */ + unsigned int hint_shift_pdir; +#endif +#if DELAYED_RESOURCE_CNT > 0 + int saved_cnt; + struct sba_dma_pair { + dma_addr_t iova; + size_t size; + } saved[DELAYED_RESOURCE_CNT]; +#endif + +#ifdef SBA_COLLECT_STATS +#define SBA_SEARCH_SAMPLE 0x100 + unsigned long avg_search[SBA_SEARCH_SAMPLE]; + unsigned long avg_idx; /* current index into avg_search */ + unsigned long used_pages; + unsigned long msingle_calls; + unsigned long msingle_pages; + unsigned long msg_calls; + unsigned long msg_pages; + unsigned long usingle_calls; + unsigned long usingle_pages; + unsigned long usg_calls; + unsigned long usg_pages; +#endif + /* STUFF We don't need in performance path */ + unsigned int pdir_size; /* in bytes, determined by IOV Space size */ +}; + +struct sba_device { + struct sba_device *next; /* list of SBA's in system */ + struct parisc_device *dev; /* dev found in bus walk */ + const char *name; + void __iomem *sba_hpa; /* base address */ + spinlock_t sba_lock; + unsigned int flags; /* state/functionality enabled */ + unsigned int hw_rev; /* HW revision of chip */ + + struct resource chip_resv; /* MMIO reserved for chip */ + struct resource iommu_resv; /* MMIO reserved for iommu */ + + unsigned int num_ioc; /* number of on-board IOC's */ + struct ioc ioc[MAX_IOC]; +}; + +#define ASTRO_RUNWAY_PORT 0x582 +#define IKE_MERCED_PORT 0x803 +#define REO_MERCED_PORT 0x804 +#define REOG_MERCED_PORT 0x805 +#define PLUTO_MCKINLEY_PORT 0x880 + +static inline int IS_ASTRO(struct parisc_device *d) { + return d->id.hversion == ASTRO_RUNWAY_PORT; +} + +static inline int IS_IKE(struct parisc_device *d) { + return d->id.hversion == IKE_MERCED_PORT; +} + +static inline int IS_PLUTO(struct parisc_device *d) { + return d->id.hversion == PLUTO_MCKINLEY_PORT; +} + +#define PLUTO_IOVA_BASE (1UL*1024*1024*1024) /* 1GB */ +#define PLUTO_IOVA_SIZE (1UL*1024*1024*1024) /* 1GB */ +#define PLUTO_GART_SIZE (PLUTO_IOVA_SIZE / 2) + +#define SBA_PDIR_VALID_BIT 0x8000000000000000ULL + +#define SBA_AGPGART_COOKIE 0x0000badbadc0ffeeULL + +#define SBA_FUNC_ID 0x0000 /* function id */ +#define SBA_FCLASS 0x0008 /* function class, bist, header, rev... */ + +#define SBA_FUNC_SIZE 4096 /* SBA configuration function reg set */ + +#define ASTRO_IOC_OFFSET (32 * SBA_FUNC_SIZE) +#define PLUTO_IOC_OFFSET (1 * SBA_FUNC_SIZE) +/* Ike's IOC's occupy functions 2 and 3 */ +#define IKE_IOC_OFFSET(p) ((p+2) * SBA_FUNC_SIZE) + +#define IOC_CTRL 0x8 /* IOC_CTRL offset */ +#define IOC_CTRL_TC (1 << 0) /* TOC Enable */ +#define IOC_CTRL_CE (1 << 1) /* Coalesce Enable */ +#define IOC_CTRL_DE (1 << 2) /* Dillon Enable */ +#define IOC_CTRL_RM (1 << 8) /* Real Mode */ +#define IOC_CTRL_NC (1 << 9) /* Non Coherent Mode */ +#define IOC_CTRL_D4 (1 << 11) /* Disable 4-byte coalescing */ +#define IOC_CTRL_DD (1 << 13) /* Disable distr. LMMIO range coalescing */ + +/* +** Offsets into MBIB (Function 0 on Ike and hopefully Astro) +** Firmware programs this stuff. Don't touch it. +*/ +#define LMMIO_DIRECT0_BASE 0x300 +#define LMMIO_DIRECT0_MASK 0x308 +#define LMMIO_DIRECT0_ROUTE 0x310 + +#define LMMIO_DIST_BASE 0x360 +#define LMMIO_DIST_MASK 0x368 +#define LMMIO_DIST_ROUTE 0x370 + +#define IOS_DIST_BASE 0x390 +#define IOS_DIST_MASK 0x398 +#define IOS_DIST_ROUTE 0x3A0 + +#define IOS_DIRECT_BASE 0x3C0 +#define IOS_DIRECT_MASK 0x3C8 +#define IOS_DIRECT_ROUTE 0x3D0 + +/* +** Offsets into I/O TLB (Function 2 and 3 on Ike) +*/ +#define ROPE0_CTL 0x200 /* "regbus pci0" */ +#define ROPE1_CTL 0x208 +#define ROPE2_CTL 0x210 +#define ROPE3_CTL 0x218 +#define ROPE4_CTL 0x220 +#define ROPE5_CTL 0x228 +#define ROPE6_CTL 0x230 +#define ROPE7_CTL 0x238 + +#define IOC_ROPE0_CFG 0x500 /* pluto only */ +#define IOC_ROPE_AO 0x10 /* Allow "Relaxed Ordering" */ + +#define HF_ENABLE 0x40 + +#define IOC_IBASE 0x300 /* IO TLB */ +#define IOC_IMASK 0x308 +#define IOC_PCOM 0x310 +#define IOC_TCNFG 0x318 +#define IOC_PDIR_BASE 0x320 + +/* +** IOC supports 4/8/16/64KB page sizes (see TCNFG register) +** It's safer (avoid memory corruption) to keep DMA page mappings +** equivalently sized to VM PAGE_SIZE. +** +** We really can't avoid generating a new mapping for each +** page since the Virtual Coherence Index has to be generated +** and updated for each page. +** +** PAGE_SIZE could be greater than IOVP_SIZE. But not the inverse. +*/ +#define IOVP_SIZE PAGE_SIZE +#define IOVP_SHIFT PAGE_SHIFT +#define IOVP_MASK PAGE_MASK + +#define SBA_PERF_CFG 0x708 /* Performance Counter stuff */ +#define SBA_PERF_MASK1 0x718 +#define SBA_PERF_MASK2 0x730 + +/* +** Offsets into PCI Performance Counters (functions 12 and 13) +** Controlled by PERF registers in function 2 & 3 respectively. +*/ +#define SBA_PERF_CNT1 0x200 +#define SBA_PERF_CNT2 0x208 +#define SBA_PERF_CNT3 0x210 + +/* +** lba_device: Per instance Elroy data structure +*/ +struct lba_device { + struct pci_hba_data hba; + + spinlock_t lba_lock; + void *iosapic_obj; + +#ifdef CONFIG_64BIT + void __iomem *iop_base; /* PA_VIEW - for IO port accessor funcs */ +#endif + + int flags; /* state/functionality enabled */ + int hw_rev; /* HW revision of chip */ +}; + +#define ELROY_HVERS 0x782 +#define MERCURY_HVERS 0x783 +#define QUICKSILVER_HVERS 0x784 + +static inline int IS_ELROY(struct parisc_device *d) { + return (d->id.hversion == ELROY_HVERS); +} + +static inline int IS_MERCURY(struct parisc_device *d) { + return (d->id.hversion == MERCURY_HVERS); +} + +static inline int IS_QUICKSILVER(struct parisc_device *d) { + return (d->id.hversion == QUICKSILVER_HVERS); +} + +static inline int agp_mode_mercury(void __iomem *hpa) { + u64 bus_mode; + + bus_mode = readl(hpa + 0x0620); + if (bus_mode & 1) + return 1; + + return 0; +} + +/* +** I/O SAPIC init function +** Caller knows where an I/O SAPIC is. LBA has an integrated I/O SAPIC. +** Call setup as part of per instance initialization. +** (ie *not* init_module() function unless only one is present.) +** fixup_irq is to initialize PCI IRQ line support and +** virtualize pcidev->irq value. To be called by pci_fixup_bus(). +*/ +extern void *iosapic_register(unsigned long hpa); +extern int iosapic_fixup_irq(void *obj, struct pci_dev *pcidev); + +#define LBA_FUNC_ID 0x0000 /* function id */ +#define LBA_FCLASS 0x0008 /* function class, bist, header, rev... */ +#define LBA_CAPABLE 0x0030 /* capabilities register */ + +#define LBA_PCI_CFG_ADDR 0x0040 /* poke CFG address here */ +#define LBA_PCI_CFG_DATA 0x0048 /* read or write data here */ + +#define LBA_PMC_MTLT 0x0050 /* Firmware sets this - read only. */ +#define LBA_FW_SCRATCH 0x0058 /* Firmware writes the PCI bus number here. */ +#define LBA_ERROR_ADDR 0x0070 /* On error, address gets logged here */ + +#define LBA_ARB_MASK 0x0080 /* bit 0 enable arbitration. PAT/PDC enables */ +#define LBA_ARB_PRI 0x0088 /* firmware sets this. */ +#define LBA_ARB_MODE 0x0090 /* firmware sets this. */ +#define LBA_ARB_MTLT 0x0098 /* firmware sets this. */ + +#define LBA_MOD_ID 0x0100 /* Module ID. PDC_PAT_CELL reports 4 */ + +#define LBA_STAT_CTL 0x0108 /* Status & Control */ +#define LBA_BUS_RESET 0x01 /* Deassert PCI Bus Reset Signal */ +#define CLEAR_ERRLOG 0x10 /* "Clear Error Log" cmd */ +#define CLEAR_ERRLOG_ENABLE 0x20 /* "Clear Error Log" Enable */ +#define HF_ENABLE 0x40 /* enable HF mode (default is -1 mode) */ + +#define LBA_LMMIO_BASE 0x0200 /* < 4GB I/O address range */ +#define LBA_LMMIO_MASK 0x0208 + +#define LBA_GMMIO_BASE 0x0210 /* > 4GB I/O address range */ +#define LBA_GMMIO_MASK 0x0218 + +#define LBA_WLMMIO_BASE 0x0220 /* All < 4GB ranges under the same *SBA* */ +#define LBA_WLMMIO_MASK 0x0228 + +#define LBA_WGMMIO_BASE 0x0230 /* All > 4GB ranges under the same *SBA* */ +#define LBA_WGMMIO_MASK 0x0238 + +#define LBA_IOS_BASE 0x0240 /* I/O port space for this LBA */ +#define LBA_IOS_MASK 0x0248 + +#define LBA_ELMMIO_BASE 0x0250 /* Extra LMMIO range */ +#define LBA_ELMMIO_MASK 0x0258 + +#define LBA_EIOS_BASE 0x0260 /* Extra I/O port space */ +#define LBA_EIOS_MASK 0x0268 + +#define LBA_GLOBAL_MASK 0x0270 /* Mercury only: Global Address Mask */ +#define LBA_DMA_CTL 0x0278 /* firmware sets this */ + +#define LBA_IBASE 0x0300 /* SBA DMA support */ +#define LBA_IMASK 0x0308 + +/* FIXME: ignore DMA Hint stuff until we can measure performance */ +#define LBA_HINT_CFG 0x0310 +#define LBA_HINT_BASE 0x0380 /* 14 registers at every 8 bytes. */ + +#define LBA_BUS_MODE 0x0620 + +/* ERROR regs are needed for config cycle kluges */ +#define LBA_ERROR_CONFIG 0x0680 +#define LBA_SMART_MODE 0x20 +#define LBA_ERROR_STATUS 0x0688 +#define LBA_ROPE_CTL 0x06A0 + +#define LBA_IOSAPIC_BASE 0x800 /* Offset of IRQ logic */ + +#endif /*_ASM_PARISC_ROPES_H_*/ |