summaryrefslogtreecommitdiffstats
path: root/arch/parisc/include/asm/system.h
diff options
context:
space:
mode:
Diffstat (limited to 'arch/parisc/include/asm/system.h')
-rw-r--r--arch/parisc/include/asm/system.h171
1 files changed, 6 insertions, 165 deletions
diff --git a/arch/parisc/include/asm/system.h b/arch/parisc/include/asm/system.h
index b19e63a8e84..fc2c1261ac1 100644
--- a/arch/parisc/include/asm/system.h
+++ b/arch/parisc/include/asm/system.h
@@ -1,165 +1,6 @@
-#ifndef __PARISC_SYSTEM_H
-#define __PARISC_SYSTEM_H
-
-#include <linux/irqflags.h>
-
-/* The program status word as bitfields. */
-struct pa_psw {
- unsigned int y:1;
- unsigned int z:1;
- unsigned int rv:2;
- unsigned int w:1;
- unsigned int e:1;
- unsigned int s:1;
- unsigned int t:1;
-
- unsigned int h:1;
- unsigned int l:1;
- unsigned int n:1;
- unsigned int x:1;
- unsigned int b:1;
- unsigned int c:1;
- unsigned int v:1;
- unsigned int m:1;
-
- unsigned int cb:8;
-
- unsigned int o:1;
- unsigned int g:1;
- unsigned int f:1;
- unsigned int r:1;
- unsigned int q:1;
- unsigned int p:1;
- unsigned int d:1;
- unsigned int i:1;
-};
-
-#ifdef CONFIG_64BIT
-#define pa_psw(task) ((struct pa_psw *) ((char *) (task) + TASK_PT_PSW + 4))
-#else
-#define pa_psw(task) ((struct pa_psw *) ((char *) (task) + TASK_PT_PSW))
-#endif
-
-struct task_struct;
-
-extern struct task_struct *_switch_to(struct task_struct *, struct task_struct *);
-
-#define switch_to(prev, next, last) do { \
- (last) = _switch_to(prev, next); \
-} while(0)
-
-#define mfctl(reg) ({ \
- unsigned long cr; \
- __asm__ __volatile__( \
- "mfctl " #reg ",%0" : \
- "=r" (cr) \
- ); \
- cr; \
-})
-
-#define mtctl(gr, cr) \
- __asm__ __volatile__("mtctl %0,%1" \
- : /* no outputs */ \
- : "r" (gr), "i" (cr) : "memory")
-
-/* these are here to de-mystefy the calling code, and to provide hooks */
-/* which I needed for debugging EIEM problems -PB */
-#define get_eiem() mfctl(15)
-static inline void set_eiem(unsigned long val)
-{
- mtctl(val, 15);
-}
-
-#define mfsp(reg) ({ \
- unsigned long cr; \
- __asm__ __volatile__( \
- "mfsp " #reg ",%0" : \
- "=r" (cr) \
- ); \
- cr; \
-})
-
-#define mtsp(gr, cr) \
- __asm__ __volatile__("mtsp %0,%1" \
- : /* no outputs */ \
- : "r" (gr), "i" (cr) : "memory")
-
-
-/*
-** This is simply the barrier() macro from linux/kernel.h but when serial.c
-** uses tqueue.h uses smp_mb() defined using barrier(), linux/kernel.h
-** hasn't yet been included yet so it fails, thus repeating the macro here.
-**
-** PA-RISC architecture allows for weakly ordered memory accesses although
-** none of the processors use it. There is a strong ordered bit that is
-** set in the O-bit of the page directory entry. Operating systems that
-** can not tolerate out of order accesses should set this bit when mapping
-** pages. The O-bit of the PSW should also be set to 1 (I don't believe any
-** of the processor implemented the PSW O-bit). The PCX-W ERS states that
-** the TLB O-bit is not implemented so the page directory does not need to
-** have the O-bit set when mapping pages (section 3.1). This section also
-** states that the PSW Y, Z, G, and O bits are not implemented.
-** So it looks like nothing needs to be done for parisc-linux (yet).
-** (thanks to chada for the above comment -ggg)
-**
-** The __asm__ op below simple prevents gcc/ld from reordering
-** instructions across the mb() "call".
-*/
-#define mb() __asm__ __volatile__("":::"memory") /* barrier() */
-#define rmb() mb()
-#define wmb() mb()
-#define smp_mb() mb()
-#define smp_rmb() mb()
-#define smp_wmb() mb()
-#define smp_read_barrier_depends() do { } while(0)
-#define read_barrier_depends() do { } while(0)
-
-#define set_mb(var, value) do { var = value; mb(); } while (0)
-
-#ifndef CONFIG_PA20
-/* Because kmalloc only guarantees 8-byte alignment for kmalloc'd data,
- and GCC only guarantees 8-byte alignment for stack locals, we can't
- be assured of 16-byte alignment for atomic lock data even if we
- specify "__attribute ((aligned(16)))" in the type declaration. So,
- we use a struct containing an array of four ints for the atomic lock
- type and dynamically select the 16-byte aligned int from the array
- for the semaphore. */
-
-#define __PA_LDCW_ALIGNMENT 16
-#define __ldcw_align(a) ({ \
- unsigned long __ret = (unsigned long) &(a)->lock[0]; \
- __ret = (__ret + __PA_LDCW_ALIGNMENT - 1) \
- & ~(__PA_LDCW_ALIGNMENT - 1); \
- (volatile unsigned int *) __ret; \
-})
-#define __LDCW "ldcw"
-
-#else /*CONFIG_PA20*/
-/* From: "Jim Hull" <jim.hull of hp.com>
- I've attached a summary of the change, but basically, for PA 2.0, as
- long as the ",CO" (coherent operation) completer is specified, then the
- 16-byte alignment requirement for ldcw and ldcd is relaxed, and instead
- they only require "natural" alignment (4-byte for ldcw, 8-byte for
- ldcd). */
-
-#define __PA_LDCW_ALIGNMENT 4
-#define __ldcw_align(a) (&(a)->slock)
-#define __LDCW "ldcw,co"
-
-#endif /*!CONFIG_PA20*/
-
-/* LDCW, the only atomic read-write operation PA-RISC has. *sigh*. */
-#define __ldcw(a) ({ \
- unsigned __ret; \
- __asm__ __volatile__(__LDCW " 0(%2),%0" \
- : "=r" (__ret), "+m" (*(a)) : "r" (a)); \
- __ret; \
-})
-
-#ifdef CONFIG_SMP
-# define __lock_aligned __attribute__((__section__(".data..lock_aligned")))
-#endif
-
-#define arch_align_stack(x) (x)
-
-#endif
+/* FILE TO BE DELETED. DO NOT ADD STUFF HERE! */
+#include <asm/barrier.h>
+#include <asm/exec.h>
+#include <asm/ldcw.h>
+#include <asm/special_insns.h>
+#include <asm/switch_to.h>