diff options
Diffstat (limited to 'arch/parisc/kernel/firmware.c')
| -rw-r--r-- | arch/parisc/kernel/firmware.c | 1405 |
1 files changed, 1405 insertions, 0 deletions
diff --git a/arch/parisc/kernel/firmware.c b/arch/parisc/kernel/firmware.c new file mode 100644 index 00000000000..f244fb200db --- /dev/null +++ b/arch/parisc/kernel/firmware.c @@ -0,0 +1,1405 @@ +/* + * arch/parisc/kernel/firmware.c - safe PDC access routines + * + * PDC == Processor Dependent Code + * + * See http://www.parisc-linux.org/documentation/index.html + * for documentation describing the entry points and calling + * conventions defined below. + * + * Copyright 1999 SuSE GmbH Nuernberg (Philipp Rumpf, prumpf@tux.org) + * Copyright 1999 The Puffin Group, (Alex deVries, David Kennedy) + * Copyright 2003 Grant Grundler <grundler parisc-linux org> + * Copyright 2003,2004 Ryan Bradetich <rbrad@parisc-linux.org> + * Copyright 2004 Thibaut VARENE <varenet@parisc-linux.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +/* I think it would be in everyone's best interest to follow this + * guidelines when writing PDC wrappers: + * + * - the name of the pdc wrapper should match one of the macros + * used for the first two arguments + * - don't use caps for random parts of the name + * - use the static PDC result buffers and "copyout" to structs + * supplied by the caller to encapsulate alignment restrictions + * - hold pdc_lock while in PDC or using static result buffers + * - use __pa() to convert virtual (kernel) pointers to physical + * ones. + * - the name of the struct used for pdc return values should equal + * one of the macros used for the first two arguments to the + * corresponding PDC call + * - keep the order of arguments + * - don't be smart (setting trailing NUL bytes for strings, return + * something useful even if the call failed) unless you are sure + * it's not going to affect functionality or performance + * + * Example: + * int pdc_cache_info(struct pdc_cache_info *cache_info ) + * { + * int retval; + * + * spin_lock_irq(&pdc_lock); + * retval = mem_pdc_call(PDC_CACHE,PDC_CACHE_INFO,__pa(cache_info),0); + * convert_to_wide(pdc_result); + * memcpy(cache_info, pdc_result, sizeof(*cache_info)); + * spin_unlock_irq(&pdc_lock); + * + * return retval; + * } + * prumpf 991016 + */ + +#include <stdarg.h> + +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/string.h> +#include <linux/spinlock.h> + +#include <asm/page.h> +#include <asm/pdc.h> +#include <asm/pdcpat.h> +#include <asm/system.h> +#include <asm/processor.h> /* for boot_cpu_data */ + +static DEFINE_SPINLOCK(pdc_lock); +static unsigned long pdc_result[32] __attribute__ ((aligned (8))); +static unsigned long pdc_result2[32] __attribute__ ((aligned (8))); + +#ifdef __LP64__ +#define WIDE_FIRMWARE 0x1 +#define NARROW_FIRMWARE 0x2 + +/* Firmware needs to be initially set to narrow to determine the + * actual firmware width. */ +int parisc_narrow_firmware = 1; +#endif + +/* on all currently-supported platforms, IODC I/O calls are always + * 32-bit calls, and MEM_PDC calls are always the same width as the OS. + * This means Cxxx boxes can't run wide kernels right now. -PB + * + * CONFIG_PDC_NARROW has been added to allow 64-bit kernels to run on + * systems with 32-bit MEM_PDC calls. This will allow wide kernels to + * run on Cxxx boxes now. -RB + * + * Note that some PAT boxes may have 64-bit IODC I/O... + */ + +#ifdef __LP64__ +long real64_call(unsigned long function, ...); +#endif +long real32_call(unsigned long function, ...); + +#ifdef __LP64__ +# define MEM_PDC (unsigned long)(PAGE0->mem_pdc_hi) << 32 | PAGE0->mem_pdc +# define mem_pdc_call(args...) unlikely(parisc_narrow_firmware) ? real32_call(MEM_PDC, args) : real64_call(MEM_PDC, args) +#else +# define MEM_PDC (unsigned long)PAGE0->mem_pdc +# define mem_pdc_call(args...) real32_call(MEM_PDC, args) +#endif + + +/** + * f_extend - Convert PDC addresses to kernel addresses. + * @address: Address returned from PDC. + * + * This function is used to convert PDC addresses into kernel addresses + * when the PDC address size and kernel address size are different. + */ +static unsigned long f_extend(unsigned long address) +{ +#ifdef __LP64__ + if(unlikely(parisc_narrow_firmware)) { + if((address & 0xff000000) == 0xf0000000) + return 0xf0f0f0f000000000UL | (u32)address; + + if((address & 0xf0000000) == 0xf0000000) + return 0xffffffff00000000UL | (u32)address; + } +#endif + return address; +} + +/** + * convert_to_wide - Convert the return buffer addresses into kernel addresses. + * @address: The return buffer from PDC. + * + * This function is used to convert the return buffer addresses retrieved from PDC + * into kernel addresses when the PDC address size and kernel address size are + * different. + */ +static void convert_to_wide(unsigned long *addr) +{ +#ifdef __LP64__ + int i; + unsigned int *p = (unsigned int *)addr; + + if(unlikely(parisc_narrow_firmware)) { + for(i = 31; i >= 0; --i) + addr[i] = p[i]; + } +#endif +} + +/** + * set_firmware_width - Determine if the firmware is wide or narrow. + * + * This function must be called before any pdc_* function that uses the convert_to_wide + * function. + */ +void __init set_firmware_width(void) +{ +#ifdef __LP64__ + int retval; + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_MODEL, PDC_MODEL_CAPABILITIES, __pa(pdc_result), 0); + convert_to_wide(pdc_result); + if(pdc_result[0] != NARROW_FIRMWARE) + parisc_narrow_firmware = 0; + spin_unlock_irq(&pdc_lock); +#endif +} + +/** + * pdc_emergency_unlock - Unlock the linux pdc lock + * + * This call unlocks the linux pdc lock in case we need some PDC functions + * (like pdc_add_valid) during kernel stack dump. + */ +void pdc_emergency_unlock(void) +{ + /* Spinlock DEBUG code freaks out if we unconditionally unlock */ + if (spin_is_locked(&pdc_lock)) + spin_unlock(&pdc_lock); +} + + +/** + * pdc_add_valid - Verify address can be accessed without causing a HPMC. + * @address: Address to be verified. + * + * This PDC call attempts to read from the specified address and verifies + * if the address is valid. + * + * The return value is PDC_OK (0) in case accessing this address is valid. + */ +int pdc_add_valid(unsigned long address) +{ + int retval; + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_ADD_VALID, PDC_ADD_VALID_VERIFY, address); + spin_unlock_irq(&pdc_lock); + + return retval; +} +EXPORT_SYMBOL(pdc_add_valid); + +/** + * pdc_chassis_info - Return chassis information. + * @result: The return buffer. + * @chassis_info: The memory buffer address. + * @len: The size of the memory buffer address. + * + * An HVERSION dependent call for returning the chassis information. + */ +int __init pdc_chassis_info(struct pdc_chassis_info *chassis_info, void *led_info, unsigned long len) +{ + int retval; + + spin_lock_irq(&pdc_lock); + memcpy(&pdc_result, chassis_info, sizeof(*chassis_info)); + memcpy(&pdc_result2, led_info, len); + retval = mem_pdc_call(PDC_CHASSIS, PDC_RETURN_CHASSIS_INFO, + __pa(pdc_result), __pa(pdc_result2), len); + memcpy(chassis_info, pdc_result, sizeof(*chassis_info)); + memcpy(led_info, pdc_result2, len); + spin_unlock_irq(&pdc_lock); + + return retval; +} + +/** + * pdc_pat_chassis_send_log - Sends a PDC PAT CHASSIS log message. + * @retval: -1 on error, 0 on success. Other value are PDC errors + * + * Must be correctly formatted or expect system crash + */ +#ifdef __LP64__ +int pdc_pat_chassis_send_log(unsigned long state, unsigned long data) +{ + int retval = 0; + + if (!is_pdc_pat()) + return -1; + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_PAT_CHASSIS_LOG, PDC_PAT_CHASSIS_WRITE_LOG, __pa(&state), __pa(&data)); + spin_unlock_irq(&pdc_lock); + + return retval; +} +#endif + +/** + * pdc_chassis_disp - Updates display + * @retval: -1 on error, 0 on success + * + * Works on old PDC only (E class, others?) + */ +int pdc_chassis_disp(unsigned long disp) +{ + int retval = 0; + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_CHASSIS, PDC_CHASSIS_DISP, disp); + spin_unlock_irq(&pdc_lock); + + return retval; +} + +/** + * pdc_coproc_cfg - To identify coprocessors attached to the processor. + * @pdc_coproc_info: Return buffer address. + * + * This PDC call returns the presence and status of all the coprocessors + * attached to the processor. + */ +int __init pdc_coproc_cfg(struct pdc_coproc_cfg *pdc_coproc_info) +{ + int retval; + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_COPROC, PDC_COPROC_CFG, __pa(pdc_result)); + convert_to_wide(pdc_result); + pdc_coproc_info->ccr_functional = pdc_result[0]; + pdc_coproc_info->ccr_present = pdc_result[1]; + pdc_coproc_info->revision = pdc_result[17]; + pdc_coproc_info->model = pdc_result[18]; + spin_unlock_irq(&pdc_lock); + + return retval; +} + +/** + * pdc_iodc_read - Read data from the modules IODC. + * @actcnt: The actual number of bytes. + * @hpa: The HPA of the module for the iodc read. + * @index: The iodc entry point. + * @iodc_data: A buffer memory for the iodc options. + * @iodc_data_size: Size of the memory buffer. + * + * This PDC call reads from the IODC of the module specified by the hpa + * argument. + */ +int pdc_iodc_read(unsigned long *actcnt, unsigned long hpa, unsigned int index, + void *iodc_data, unsigned int iodc_data_size) +{ + int retval; + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_IODC, PDC_IODC_READ, __pa(pdc_result), hpa, + index, __pa(pdc_result2), iodc_data_size); + convert_to_wide(pdc_result); + *actcnt = pdc_result[0]; + memcpy(iodc_data, pdc_result2, iodc_data_size); + spin_unlock_irq(&pdc_lock); + + return retval; +} +EXPORT_SYMBOL(pdc_iodc_read); + +/** + * pdc_system_map_find_mods - Locate unarchitected modules. + * @pdc_mod_info: Return buffer address. + * @mod_path: pointer to dev path structure. + * @mod_index: fixed address module index. + * + * To locate and identify modules which reside at fixed I/O addresses, which + * do not self-identify via architected bus walks. + */ +int pdc_system_map_find_mods(struct pdc_system_map_mod_info *pdc_mod_info, + struct pdc_module_path *mod_path, long mod_index) +{ + int retval; + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_SYSTEM_MAP, PDC_FIND_MODULE, __pa(pdc_result), + __pa(pdc_result2), mod_index); + convert_to_wide(pdc_result); + memcpy(pdc_mod_info, pdc_result, sizeof(*pdc_mod_info)); + memcpy(mod_path, pdc_result2, sizeof(*mod_path)); + spin_unlock_irq(&pdc_lock); + + pdc_mod_info->mod_addr = f_extend(pdc_mod_info->mod_addr); + return retval; +} + +/** + * pdc_system_map_find_addrs - Retrieve additional address ranges. + * @pdc_addr_info: Return buffer address. + * @mod_index: Fixed address module index. + * @addr_index: Address range index. + * + * Retrieve additional information about subsequent address ranges for modules + * with multiple address ranges. + */ +int pdc_system_map_find_addrs(struct pdc_system_map_addr_info *pdc_addr_info, + long mod_index, long addr_index) +{ + int retval; + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_SYSTEM_MAP, PDC_FIND_ADDRESS, __pa(pdc_result), + mod_index, addr_index); + convert_to_wide(pdc_result); + memcpy(pdc_addr_info, pdc_result, sizeof(*pdc_addr_info)); + spin_unlock_irq(&pdc_lock); + + pdc_addr_info->mod_addr = f_extend(pdc_addr_info->mod_addr); + return retval; +} + +/** + * pdc_model_info - Return model information about the processor. + * @model: The return buffer. + * + * Returns the version numbers, identifiers, and capabilities from the processor module. + */ +int pdc_model_info(struct pdc_model *model) +{ + int retval; + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_MODEL, PDC_MODEL_INFO, __pa(pdc_result), 0); + convert_to_wide(pdc_result); + memcpy(model, pdc_result, sizeof(*model)); + spin_unlock_irq(&pdc_lock); + + return retval; +} + +/** + * pdc_model_sysmodel - Get the system model name. + * @name: A char array of at least 81 characters. + * + * Get system model name from PDC ROM (e.g. 9000/715 or 9000/778/B160L) + */ +int pdc_model_sysmodel(char *name) +{ + int retval; + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_MODEL, PDC_MODEL_SYSMODEL, __pa(pdc_result), + OS_ID_HPUX, __pa(name)); + convert_to_wide(pdc_result); + + if (retval == PDC_OK) { + name[pdc_result[0]] = '\0'; /* add trailing '\0' */ + } else { + name[0] = 0; + } + spin_unlock_irq(&pdc_lock); + + return retval; +} + +/** + * pdc_model_versions - Identify the version number of each processor. + * @cpu_id: The return buffer. + * @id: The id of the processor to check. + * + * Returns the version number for each processor component. + * + * This comment was here before, but I do not know what it means :( -RB + * id: 0 = cpu revision, 1 = boot-rom-version + */ +int pdc_model_versions(unsigned long *versions, int id) +{ + int retval; + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_MODEL, PDC_MODEL_VERSIONS, __pa(pdc_result), id); + convert_to_wide(pdc_result); + *versions = pdc_result[0]; + spin_unlock_irq(&pdc_lock); + + return retval; +} + +/** + * pdc_model_cpuid - Returns the CPU_ID. + * @cpu_id: The return buffer. + * + * Returns the CPU_ID value which uniquely identifies the cpu portion of + * the processor module. + */ +int pdc_model_cpuid(unsigned long *cpu_id) +{ + int retval; + + spin_lock_irq(&pdc_lock); + pdc_result[0] = 0; /* preset zero (call may not be implemented!) */ + retval = mem_pdc_call(PDC_MODEL, PDC_MODEL_CPU_ID, __pa(pdc_result), 0); + convert_to_wide(pdc_result); + *cpu_id = pdc_result[0]; + spin_unlock_irq(&pdc_lock); + + return retval; +} + +/** + * pdc_model_capabilities - Returns the platform capabilities. + * @capabilities: The return buffer. + * + * Returns information about platform support for 32- and/or 64-bit + * OSes, IO-PDIR coherency, and virtual aliasing. + */ +int pdc_model_capabilities(unsigned long *capabilities) +{ + int retval; + + spin_lock_irq(&pdc_lock); + pdc_result[0] = 0; /* preset zero (call may not be implemented!) */ + retval = mem_pdc_call(PDC_MODEL, PDC_MODEL_CAPABILITIES, __pa(pdc_result), 0); + convert_to_wide(pdc_result); + *capabilities = pdc_result[0]; + spin_unlock_irq(&pdc_lock); + + return retval; +} + +/** + * pdc_cache_info - Return cache and TLB information. + * @cache_info: The return buffer. + * + * Returns information about the processor's cache and TLB. + */ +int pdc_cache_info(struct pdc_cache_info *cache_info) +{ + int retval; + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_CACHE, PDC_CACHE_INFO, __pa(pdc_result), 0); + convert_to_wide(pdc_result); + memcpy(cache_info, pdc_result, sizeof(*cache_info)); + spin_unlock_irq(&pdc_lock); + + return retval; +} + +#ifndef CONFIG_PA20 +/** + * pdc_btlb_info - Return block TLB information. + * @btlb: The return buffer. + * + * Returns information about the hardware Block TLB. + */ +int pdc_btlb_info(struct pdc_btlb_info *btlb) +{ + int retval; + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_BLOCK_TLB, PDC_BTLB_INFO, __pa(pdc_result), 0); + memcpy(btlb, pdc_result, sizeof(*btlb)); + spin_unlock_irq(&pdc_lock); + + if(retval < 0) { + btlb->max_size = 0; + } + return retval; +} + +/** + * pdc_mem_map_hpa - Find fixed module information. + * @address: The return buffer + * @mod_path: pointer to dev path structure. + * + * This call was developed for S700 workstations to allow the kernel to find + * the I/O devices (Core I/O). In the future (Kittyhawk and beyond) this + * call will be replaced (on workstations) by the architected PDC_SYSTEM_MAP + * call. + * + * This call is supported by all existing S700 workstations (up to Gecko). + */ +int pdc_mem_map_hpa(struct pdc_memory_map *address, + struct pdc_module_path *mod_path) +{ + int retval; + + spin_lock_irq(&pdc_lock); + memcpy(pdc_result2, mod_path, sizeof(*mod_path)); + retval = mem_pdc_call(PDC_MEM_MAP, PDC_MEM_MAP_HPA, __pa(pdc_result), + __pa(pdc_result2)); + memcpy(address, pdc_result, sizeof(*address)); + spin_unlock_irq(&pdc_lock); + + return retval; +} +#endif /* !CONFIG_PA20 */ + +/** + * pdc_lan_station_id - Get the LAN address. + * @lan_addr: The return buffer. + * @hpa: The network device HPA. + * + * Get the LAN station address when it is not directly available from the LAN hardware. + */ +int pdc_lan_station_id(char *lan_addr, unsigned long hpa) +{ + int retval; + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_LAN_STATION_ID, PDC_LAN_STATION_ID_READ, + __pa(pdc_result), hpa); + if (retval < 0) { + /* FIXME: else read MAC from NVRAM */ + memset(lan_addr, 0, PDC_LAN_STATION_ID_SIZE); + } else { + memcpy(lan_addr, pdc_result, PDC_LAN_STATION_ID_SIZE); + } + spin_unlock_irq(&pdc_lock); + + return retval; +} +EXPORT_SYMBOL(pdc_lan_station_id); + +/** + * pdc_stable_read - Read data from Stable Storage. + * @staddr: Stable Storage address to access. + * @memaddr: The memory address where Stable Storage data shall be copied. + * @count: number of bytes to transfert. count is multiple of 4. + * + * This PDC call reads from the Stable Storage address supplied in staddr + * and copies count bytes to the memory address memaddr. + * The call will fail if staddr+count > PDC_STABLE size. + */ +int pdc_stable_read(unsigned long staddr, void *memaddr, unsigned long count) +{ + int retval; + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_STABLE, PDC_STABLE_READ, staddr, + __pa(pdc_result), count); + convert_to_wide(pdc_result); + memcpy(memaddr, pdc_result, count); + spin_unlock_irq(&pdc_lock); + + return retval; +} +EXPORT_SYMBOL(pdc_stable_read); + +/** + * pdc_stable_write - Write data to Stable Storage. + * @staddr: Stable Storage address to access. + * @memaddr: The memory address where Stable Storage data shall be read from. + * @count: number of bytes to transfert. count is multiple of 4. + * + * This PDC call reads count bytes from the supplied memaddr address, + * and copies count bytes to the Stable Storage address staddr. + * The call will fail if staddr+count > PDC_STABLE size. + */ +int pdc_stable_write(unsigned long staddr, void *memaddr, unsigned long count) +{ + int retval; + + spin_lock_irq(&pdc_lock); + memcpy(pdc_result, memaddr, count); + convert_to_wide(pdc_result); + retval = mem_pdc_call(PDC_STABLE, PDC_STABLE_WRITE, staddr, + __pa(pdc_result), count); + spin_unlock_irq(&pdc_lock); + + return retval; +} +EXPORT_SYMBOL(pdc_stable_write); + +/** + * pdc_stable_get_size - Get Stable Storage size in bytes. + * @size: pointer where the size will be stored. + * + * This PDC call returns the number of bytes in the processor's Stable + * Storage, which is the number of contiguous bytes implemented in Stable + * Storage starting from staddr=0. size in an unsigned 64-bit integer + * which is a multiple of four. + */ +int pdc_stable_get_size(unsigned long *size) +{ + int retval; + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_STABLE, PDC_STABLE_RETURN_SIZE, __pa(pdc_result)); + *size = pdc_result[0]; + spin_unlock_irq(&pdc_lock); + + return retval; +} +EXPORT_SYMBOL(pdc_stable_get_size); + +/** + * pdc_stable_verify_contents - Checks that Stable Storage contents are valid. + * + * This PDC call is meant to be used to check the integrity of the current + * contents of Stable Storage. + */ +int pdc_stable_verify_contents(void) +{ + int retval; + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_STABLE, PDC_STABLE_VERIFY_CONTENTS); + spin_unlock_irq(&pdc_lock); + + return retval; +} +EXPORT_SYMBOL(pdc_stable_verify_contents); + +/** + * pdc_stable_initialize - Sets Stable Storage contents to zero and initialize + * the validity indicator. + * + * This PDC call will erase all contents of Stable Storage. Use with care! + */ +int pdc_stable_initialize(void) +{ + int retval; + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_STABLE, PDC_STABLE_INITIALIZE); + spin_unlock_irq(&pdc_lock); + + return retval; +} +EXPORT_SYMBOL(pdc_stable_initialize); + +/** + * pdc_get_initiator - Get the SCSI Interface Card params (SCSI ID, SDTR, SE or LVD) + * @hwpath: fully bc.mod style path to the device. + * @initiator: the array to return the result into + * + * Get the SCSI operational parameters from PDC. + * Needed since HPUX never used BIOS or symbios card NVRAM. + * Most ncr/sym cards won't have an entry and just use whatever + * capabilities of the card are (eg Ultra, LVD). But there are + * several cases where it's useful: + * o set SCSI id for Multi-initiator clusters, + * o cable too long (ie SE scsi 10Mhz won't support 6m length), + * o bus width exported is less than what the interface chip supports. + */ +int pdc_get_initiator(struct hardware_path *hwpath, struct pdc_initiator *initiator) +{ + int retval; + + spin_lock_irq(&pdc_lock); + +/* BCJ-XXXX series boxes. E.G. "9000/785/C3000" */ +#define IS_SPROCKETS() (strlen(boot_cpu_data.pdc.sys_model_name) == 14 && \ + strncmp(boot_cpu_data.pdc.sys_model_name, "9000/785", 8) == 0) + + retval = mem_pdc_call(PDC_INITIATOR, PDC_GET_INITIATOR, + __pa(pdc_result), __pa(hwpath)); + if (retval < PDC_OK) + goto out; + + if (pdc_result[0] < 16) { + initiator->host_id = pdc_result[0]; + } else { + initiator->host_id = -1; + } + + /* + * Sprockets and Piranha return 20 or 40 (MT/s). Prelude returns + * 1, 2, 5 or 10 for 5, 10, 20 or 40 MT/s, respectively + */ + switch (pdc_result[1]) { + case 1: initiator->factor = 50; break; + case 2: initiator->factor = 25; break; + case 5: initiator->factor = 12; break; + case 25: initiator->factor = 10; break; + case 20: initiator->factor = 12; break; + case 40: initiator->factor = 10; break; + default: initiator->factor = -1; break; + } + + if (IS_SPROCKETS()) { + initiator->width = pdc_result[4]; + initiator->mode = pdc_result[5]; + } else { + initiator->width = -1; + initiator->mode = -1; + } + + out: + spin_unlock_irq(&pdc_lock); + return (retval >= PDC_OK); +} +EXPORT_SYMBOL(pdc_get_initiator); + + +/** + * pdc_pci_irt_size - Get the number of entries in the interrupt routing table. + * @num_entries: The return value. + * @hpa: The HPA for the device. + * + * This PDC function returns the number of entries in the specified cell's + * interrupt table. + * Similar to PDC_PAT stuff - but added for Forte/Allegro boxes + */ +int pdc_pci_irt_size(unsigned long *num_entries, unsigned long hpa) +{ + int retval; + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_PCI_INDEX, PDC_PCI_GET_INT_TBL_SIZE, + __pa(pdc_result), hpa); + convert_to_wide(pdc_result); + *num_entries = pdc_result[0]; + spin_unlock_irq(&pdc_lock); + + return retval; +} + +/** + * pdc_pci_irt - Get the PCI interrupt routing table. + * @num_entries: The number of entries in the table. + * @hpa: The Hard Physical Address of the device. + * @tbl: + * + * Get the PCI interrupt routing table for the device at the given HPA. + * Similar to PDC_PAT stuff - but added for Forte/Allegro boxes + */ +int pdc_pci_irt(unsigned long num_entries, unsigned long hpa, void *tbl) +{ + int retval; + + BUG_ON((unsigned long)tbl & 0x7); + + spin_lock_irq(&pdc_lock); + pdc_result[0] = num_entries; + retval = mem_pdc_call(PDC_PCI_INDEX, PDC_PCI_GET_INT_TBL, + __pa(pdc_result), hpa, __pa(tbl)); + spin_unlock_irq(&pdc_lock); + + return retval; +} + + +#if 0 /* UNTEST CODE - left here in case someone needs it */ + +/** + * pdc_pci_config_read - read PCI config space. + * @hpa token from PDC to indicate which PCI device + * @pci_addr configuration space address to read from + * + * Read PCI Configuration space *before* linux PCI subsystem is running. + */ +unsigned int pdc_pci_config_read(void *hpa, unsigned long cfg_addr) +{ + int retval; + spin_lock_irq(&pdc_lock); + pdc_result[0] = 0; + pdc_result[1] = 0; + retval = mem_pdc_call(PDC_PCI_INDEX, PDC_PCI_READ_CONFIG, + __pa(pdc_result), hpa, cfg_addr&~3UL, 4UL); + spin_unlock_irq(&pdc_lock); + return retval ? ~0 : (unsigned int) pdc_result[0]; +} + + +/** + * pdc_pci_config_write - read PCI config space. + * @hpa token from PDC to indicate which PCI device + * @pci_addr configuration space address to write + * @val value we want in the 32-bit register + * + * Write PCI Configuration space *before* linux PCI subsystem is running. + */ +void pdc_pci_config_write(void *hpa, unsigned long cfg_addr, unsigned int val) +{ + int retval; + spin_lock_irq(&pdc_lock); + pdc_result[0] = 0; + retval = mem_pdc_call(PDC_PCI_INDEX, PDC_PCI_WRITE_CONFIG, + __pa(pdc_result), hpa, + cfg_addr&~3UL, 4UL, (unsigned long) val); + spin_unlock_irq(&pdc_lock); + return retval; +} +#endif /* UNTESTED CODE */ + +/** + * pdc_tod_read - Read the Time-Of-Day clock. + * @tod: The return buffer: + * + * Read the Time-Of-Day clock + */ +int pdc_tod_read(struct pdc_tod *tod) +{ + int retval; + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_TOD, PDC_TOD_READ, __pa(pdc_result), 0); + convert_to_wide(pdc_result); + memcpy(tod, pdc_result, sizeof(*tod)); + spin_unlock_irq(&pdc_lock); + + return retval; +} +EXPORT_SYMBOL(pdc_tod_read); + +/** + * pdc_tod_set - Set the Time-Of-Day clock. + * @sec: The number of seconds since epoch. + * @usec: The number of micro seconds. + * + * Set the Time-Of-Day clock. + */ +int pdc_tod_set(unsigned long sec, unsigned long usec) +{ + int retval; + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_TOD, PDC_TOD_WRITE, sec, usec); + spin_unlock_irq(&pdc_lock); + + return retval; +} +EXPORT_SYMBOL(pdc_tod_set); + +#ifdef __LP64__ +int pdc_mem_mem_table(struct pdc_memory_table_raddr *r_addr, + struct pdc_memory_table *tbl, unsigned long entries) +{ + int retval; + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_MEM, PDC_MEM_TABLE, __pa(pdc_result), __pa(pdc_result2), entries); + convert_to_wide(pdc_result); + memcpy(r_addr, pdc_result, sizeof(*r_addr)); + memcpy(tbl, pdc_result2, entries * sizeof(*tbl)); + spin_unlock_irq(&pdc_lock); + + return retval; +} +#endif /* __LP64__ */ + +/* FIXME: Is this pdc used? I could not find type reference to ftc_bitmap + * so I guessed at unsigned long. Someone who knows what this does, can fix + * it later. :) + */ +int pdc_do_firm_test_reset(unsigned long ftc_bitmap) +{ + int retval; + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_BROADCAST_RESET, PDC_DO_FIRM_TEST_RESET, + PDC_FIRM_TEST_MAGIC, ftc_bitmap); + spin_unlock_irq(&pdc_lock); + + return retval; +} + +/* + * pdc_do_reset - Reset the system. + * + * Reset the system. + */ +int pdc_do_reset(void) +{ + int retval; + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_BROADCAST_RESET, PDC_DO_RESET); + spin_unlock_irq(&pdc_lock); + + return retval; +} + +/* + * pdc_soft_power_info - Enable soft power switch. + * @power_reg: address of soft power register + * + * Return the absolute address of the soft power switch register + */ +int __init pdc_soft_power_info(unsigned long *power_reg) +{ + int retval; + + *power_reg = (unsigned long) (-1); + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_SOFT_POWER, PDC_SOFT_POWER_INFO, __pa(pdc_result), 0); + if (retval == PDC_OK) { + convert_to_wide(pdc_result); + *power_reg = f_extend(pdc_result[0]); + } + spin_unlock_irq(&pdc_lock); + + return retval; +} + +/* + * pdc_soft_power_button - Control the soft power button behaviour + * @sw_control: 0 for hardware control, 1 for software control + * + * + * This PDC function places the soft power button under software or + * hardware control. + * Under software control the OS may control to when to allow to shut + * down the system. Under hardware control pressing the power button + * powers off the system immediately. + */ +int pdc_soft_power_button(int sw_control) +{ + int retval; + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_SOFT_POWER, PDC_SOFT_POWER_ENABLE, __pa(pdc_result), sw_control); + spin_unlock_irq(&pdc_lock); + return retval; +} + +/* + * pdc_io_reset - Hack to avoid overlapping range registers of Bridges devices. + * Primarily a problem on T600 (which parisc-linux doesn't support) but + * who knows what other platform firmware might do with this OS "hook". + */ +void pdc_io_reset(void) +{ + spin_lock_irq(&pdc_lock); + mem_pdc_call(PDC_IO, PDC_IO_RESET, 0); + spin_unlock_irq(&pdc_lock); +} + +/* + * pdc_io_reset_devices - Hack to Stop USB controller + * + * If PDC used the usb controller, the usb controller + * is still running and will crash the machines during iommu + * setup, because of still running DMA. This PDC call + * stops the USB controller. + * Normally called after calling pdc_io_reset(). + */ +void pdc_io_reset_devices(void) +{ + spin_lock_irq(&pdc_lock); + mem_pdc_call(PDC_IO, PDC_IO_RESET_DEVICES, 0); + spin_unlock_irq(&pdc_lock); +} + + +/** + * pdc_iodc_putc - Console character print using IODC. + * @c: the character to output. + * + * Note that only these special chars are architected for console IODC io: + * BEL, BS, CR, and LF. Others are passed through. + * Since the HP console requires CR+LF to perform a 'newline', we translate + * "\n" to "\r\n". + */ +void pdc_iodc_putc(unsigned char c) +{ + /* XXX Should we spinlock posx usage */ + static int posx; /* for simple TAB-Simulation... */ + static int __attribute__((aligned(8))) iodc_retbuf[32]; + static char __attribute__((aligned(64))) iodc_dbuf[4096]; + unsigned int n; + unsigned int flags; + + switch (c) { + case '\n': + iodc_dbuf[0] = '\r'; + iodc_dbuf[1] = '\n'; + n = 2; + posx = 0; + break; + case '\t': + pdc_iodc_putc(' '); + while (posx & 7) /* expand TAB */ + pdc_iodc_putc(' '); + return; /* return since IODC can't handle this */ + case '\b': + posx-=2; /* BS */ + default: + iodc_dbuf[0] = c; + n = 1; + posx++; + break; + } + + spin_lock_irqsave(&pdc_lock, flags); + real32_call(PAGE0->mem_cons.iodc_io, + (unsigned long)PAGE0->mem_cons.hpa, ENTRY_IO_COUT, + PAGE0->mem_cons.spa, __pa(PAGE0->mem_cons.dp.layers), + __pa(iodc_retbuf), 0, __pa(iodc_dbuf), n, 0); + spin_unlock_irqrestore(&pdc_lock, flags); +} + +/** + * pdc_iodc_outc - Console character print using IODC (without conversions). + * @c: the character to output. + * + * Write the character directly to the IODC console. + */ +void pdc_iodc_outc(unsigned char c) +{ + unsigned int n, flags; + + /* fill buffer with one caracter and print it */ + static int __attribute__((aligned(8))) iodc_retbuf[32]; + static char __attribute__((aligned(64))) iodc_dbuf[4096]; + + n = 1; + iodc_dbuf[0] = c; + + spin_lock_irqsave(&pdc_lock, flags); + real32_call(PAGE0->mem_cons.iodc_io, + (unsigned long)PAGE0->mem_cons.hpa, ENTRY_IO_COUT, + PAGE0->mem_cons.spa, __pa(PAGE0->mem_cons.dp.layers), + __pa(iodc_retbuf), 0, __pa(iodc_dbuf), n, 0); + spin_unlock_irqrestore(&pdc_lock, flags); +} + +/** + * pdc_iodc_getc - Read a character (non-blocking) from the PDC console. + * + * Read a character (non-blocking) from the PDC console, returns -1 if + * key is not present. + */ +int pdc_iodc_getc(void) +{ + unsigned int flags; + static int __attribute__((aligned(8))) iodc_retbuf[32]; + static char __attribute__((aligned(64))) iodc_dbuf[4096]; + int ch; + int status; + + /* Bail if no console input device. */ + if (!PAGE0->mem_kbd.iodc_io) + return 0; + + /* wait for a keyboard (rs232)-input */ + spin_lock_irqsave(&pdc_lock, flags); + real32_call(PAGE0->mem_kbd.iodc_io, + (unsigned long)PAGE0->mem_kbd.hpa, ENTRY_IO_CIN, + PAGE0->mem_kbd.spa, __pa(PAGE0->mem_kbd.dp.layers), + __pa(iodc_retbuf), 0, __pa(iodc_dbuf), 1, 0); + + ch = *iodc_dbuf; + status = *iodc_retbuf; + spin_unlock_irqrestore(&pdc_lock, flags); + + if (status == 0) + return -1; + + return ch; +} + +int pdc_sti_call(unsigned long func, unsigned long flags, + unsigned long inptr, unsigned long outputr, + unsigned long glob_cfg) +{ + int retval; + + spin_lock_irq(&pdc_lock); + retval = real32_call(func, flags, inptr, outputr, glob_cfg); + spin_unlock_irq(&pdc_lock); + + return retval; +} +EXPORT_SYMBOL(pdc_sti_call); + +#ifdef __LP64__ +/** + * pdc_pat_cell_get_number - Returns the cell number. + * @cell_info: The return buffer. + * + * This PDC call returns the cell number of the cell from which the call + * is made. + */ +int pdc_pat_cell_get_number(struct pdc_pat_cell_num *cell_info) +{ + int retval; + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_PAT_CELL, PDC_PAT_CELL_GET_NUMBER, __pa(pdc_result)); + memcpy(cell_info, pdc_result, sizeof(*cell_info)); + spin_unlock_irq(&pdc_lock); + + return retval; +} + +/** + * pdc_pat_cell_module - Retrieve the cell's module information. + * @actcnt: The number of bytes written to mem_addr. + * @ploc: The physical location. + * @mod: The module index. + * @view_type: The view of the address type. + * @mem_addr: The return buffer. + * + * This PDC call returns information about each module attached to the cell + * at the specified location. + */ +int pdc_pat_cell_module(unsigned long *actcnt, unsigned long ploc, unsigned long mod, + unsigned long view_type, void *mem_addr) +{ + int retval; + static struct pdc_pat_cell_mod_maddr_block result __attribute__ ((aligned (8))); + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_PAT_CELL, PDC_PAT_CELL_MODULE, __pa(pdc_result), + ploc, mod, view_type, __pa(&result)); + if(!retval) { + *actcnt = pdc_result[0]; + memcpy(mem_addr, &result, *actcnt); + } + spin_unlock_irq(&pdc_lock); + + return retval; +} + +/** + * pdc_pat_cpu_get_number - Retrieve the cpu number. + * @cpu_info: The return buffer. + * @hpa: The Hard Physical Address of the CPU. + * + * Retrieve the cpu number for the cpu at the specified HPA. + */ +int pdc_pat_cpu_get_number(struct pdc_pat_cpu_num *cpu_info, void *hpa) +{ + int retval; + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_PAT_CPU, PDC_PAT_CPU_GET_NUMBER, + __pa(&pdc_result), hpa); + memcpy(cpu_info, pdc_result, sizeof(*cpu_info)); + spin_unlock_irq(&pdc_lock); + + return retval; +} + +/** + * pdc_pat_get_irt_size - Retrieve the number of entries in the cell's interrupt table. + * @num_entries: The return value. + * @cell_num: The target cell. + * + * This PDC function returns the number of entries in the specified cell's + * interrupt table. + */ +int pdc_pat_get_irt_size(unsigned long *num_entries, unsigned long cell_num) +{ + int retval; + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_PAT_IO, PDC_PAT_IO_GET_PCI_ROUTING_TABLE_SIZE, + __pa(pdc_result), cell_num); + *num_entries = pdc_result[0]; + spin_unlock_irq(&pdc_lock); + + return retval; +} + +/** + * pdc_pat_get_irt - Retrieve the cell's interrupt table. + * @r_addr: The return buffer. + * @cell_num: The target cell. + * + * This PDC function returns the actual interrupt table for the specified cell. + */ +int pdc_pat_get_irt(void *r_addr, unsigned long cell_num) +{ + int retval; + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_PAT_IO, PDC_PAT_IO_GET_PCI_ROUTING_TABLE, + __pa(r_addr), cell_num); + spin_unlock_irq(&pdc_lock); + + return retval; +} + +/** + * pdc_pat_pd_get_addr_map - Retrieve information about memory address ranges. + * @actlen: The return buffer. + * @mem_addr: Pointer to the memory buffer. + * @count: The number of bytes to read from the buffer. + * @offset: The offset with respect to the beginning of the buffer. + * + */ +int pdc_pat_pd_get_addr_map(unsigned long *actual_len, void *mem_addr, + unsigned long count, unsigned long offset) +{ + int retval; + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_PAT_PD, PDC_PAT_PD_GET_ADDR_MAP, __pa(pdc_result), + __pa(pdc_result2), count, offset); + *actual_len = pdc_result[0]; + memcpy(mem_addr, pdc_result2, *actual_len); + spin_unlock_irq(&pdc_lock); + + return retval; +} + +/** + * pdc_pat_io_pci_cfg_read - Read PCI configuration space. + * @pci_addr: PCI configuration space address for which the read request is being made. + * @pci_size: Size of read in bytes. Valid values are 1, 2, and 4. + * @mem_addr: Pointer to return memory buffer. + * + */ +int pdc_pat_io_pci_cfg_read(unsigned long pci_addr, int pci_size, u32 *mem_addr) +{ + int retval; + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_PAT_IO, PDC_PAT_IO_PCI_CONFIG_READ, + __pa(pdc_result), pci_addr, pci_size); + switch(pci_size) { + case 1: *(u8 *) mem_addr = (u8) pdc_result[0]; + case 2: *(u16 *)mem_addr = (u16) pdc_result[0]; + case 4: *(u32 *)mem_addr = (u32) pdc_result[0]; + } + spin_unlock_irq(&pdc_lock); + + return retval; +} + +/** + * pdc_pat_io_pci_cfg_write - Retrieve information about memory address ranges. + * @pci_addr: PCI configuration space address for which the write request is being made. + * @pci_size: Size of write in bytes. Valid values are 1, 2, and 4. + * @value: Pointer to 1, 2, or 4 byte value in low order end of argument to be + * written to PCI Config space. + * + */ +int pdc_pat_io_pci_cfg_write(unsigned long pci_addr, int pci_size, u32 val) +{ + int retval; + + spin_lock_irq(&pdc_lock); + retval = mem_pdc_call(PDC_PAT_IO, PDC_PAT_IO_PCI_CONFIG_WRITE, + pci_addr, pci_size, val); + spin_unlock_irq(&pdc_lock); + + return retval; +} +#endif /* __LP64__ */ + + +/***************** 32-bit real-mode calls ***********/ +/* The struct below is used + * to overlay real_stack (real2.S), preparing a 32-bit call frame. + * real32_call_asm() then uses this stack in narrow real mode + */ + +struct narrow_stack { + /* use int, not long which is 64 bits */ + unsigned int arg13; + unsigned int arg12; + unsigned int arg11; + unsigned int arg10; + unsigned int arg9; + unsigned int arg8; + unsigned int arg7; + unsigned int arg6; + unsigned int arg5; + unsigned int arg4; + unsigned int arg3; + unsigned int arg2; + unsigned int arg1; + unsigned int arg0; + unsigned int frame_marker[8]; + unsigned int sp; + /* in reality, there's nearly 8k of stack after this */ +}; + +long real32_call(unsigned long fn, ...) +{ + va_list args; + extern struct narrow_stack real_stack; + extern unsigned long real32_call_asm(unsigned int *, + unsigned int *, + unsigned int); + + va_start(args, fn); + real_stack.arg0 = va_arg(args, unsigned int); + real_stack.arg1 = va_arg(args, unsigned int); + real_stack.arg2 = va_arg(args, unsigned int); + real_stack.arg3 = va_arg(args, unsigned int); + real_stack.arg4 = va_arg(args, unsigned int); + real_stack.arg5 = va_arg(args, unsigned int); + real_stack.arg6 = va_arg(args, unsigned int); + real_stack.arg7 = va_arg(args, unsigned int); + real_stack.arg8 = va_arg(args, unsigned int); + real_stack.arg9 = va_arg(args, unsigned int); + real_stack.arg10 = va_arg(args, unsigned int); + real_stack.arg11 = va_arg(args, unsigned int); + real_stack.arg12 = va_arg(args, unsigned int); + real_stack.arg13 = va_arg(args, unsigned int); + va_end(args); + + return real32_call_asm(&real_stack.sp, &real_stack.arg0, fn); +} + +#ifdef __LP64__ +/***************** 64-bit real-mode calls ***********/ + +struct wide_stack { + unsigned long arg0; + unsigned long arg1; + unsigned long arg2; + unsigned long arg3; + unsigned long arg4; + unsigned long arg5; + unsigned long arg6; + unsigned long arg7; + unsigned long arg8; + unsigned long arg9; + unsigned long arg10; + unsigned long arg11; + unsigned long arg12; + unsigned long arg13; + unsigned long frame_marker[2]; /* rp, previous sp */ + unsigned long sp; + /* in reality, there's nearly 8k of stack after this */ +}; + +long real64_call(unsigned long fn, ...) +{ + va_list args; + extern struct wide_stack real64_stack; + extern unsigned long real64_call_asm(unsigned long *, + unsigned long *, + unsigned long); + + va_start(args, fn); + real64_stack.arg0 = va_arg(args, unsigned long); + real64_stack.arg1 = va_arg(args, unsigned long); + real64_stack.arg2 = va_arg(args, unsigned long); + real64_stack.arg3 = va_arg(args, unsigned long); + real64_stack.arg4 = va_arg(args, unsigned long); + real64_stack.arg5 = va_arg(args, unsigned long); + real64_stack.arg6 = va_arg(args, unsigned long); + real64_stack.arg7 = va_arg(args, unsigned long); + real64_stack.arg8 = va_arg(args, unsigned long); + real64_stack.arg9 = va_arg(args, unsigned long); + real64_stack.arg10 = va_arg(args, unsigned long); + real64_stack.arg11 = va_arg(args, unsigned long); + real64_stack.arg12 = va_arg(args, unsigned long); + real64_stack.arg13 = va_arg(args, unsigned long); + va_end(args); + + return real64_call_asm(&real64_stack.sp, &real64_stack.arg0, fn); +} + +#endif /* __LP64__ */ + |