diff options
Diffstat (limited to 'arch/powerpc/boot/dts/iss4xx-mpic.dts')
| -rw-r--r-- | arch/powerpc/boot/dts/iss4xx-mpic.dts | 155 |
1 files changed, 155 insertions, 0 deletions
diff --git a/arch/powerpc/boot/dts/iss4xx-mpic.dts b/arch/powerpc/boot/dts/iss4xx-mpic.dts new file mode 100644 index 00000000000..23e9d9b7e40 --- /dev/null +++ b/arch/powerpc/boot/dts/iss4xx-mpic.dts @@ -0,0 +1,155 @@ +/* + * Device Tree Source for IBM Embedded PPC 476 Platform + * + * Copyright 2010 Torez Smith, IBM Corporation. + * + * Based on earlier code: + * Copyright (c) 2006, 2007 IBM Corp. + * Josh Boyer <jwboyer@linux.vnet.ibm.com>, David Gibson <dwg@au1.ibm.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/memreserve/ 0x01f00000 0x00100000; + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "ibm,iss-4xx"; + compatible = "ibm,iss-4xx"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + serial0 = &UART0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,4xx"; // real CPU changed in sim + reg = <0>; + clock-frequency = <100000000>; // 100Mhz :-) + timebase-frequency = <100000000>; + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + status = "ok"; + }; + cpu@1 { + device_type = "cpu"; + model = "PowerPC,4xx"; // real CPU changed in sim + reg = <1>; + clock-frequency = <100000000>; // 100Mhz :-) + timebase-frequency = <100000000>; + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + status = "disabled"; + enable-method = "spin-table"; + cpu-release-addr = <0 0x01f00100>; + }; + cpu@2 { + device_type = "cpu"; + model = "PowerPC,4xx"; // real CPU changed in sim + reg = <2>; + clock-frequency = <100000000>; // 100Mhz :-) + timebase-frequency = <100000000>; + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + status = "disabled"; + enable-method = "spin-table"; + cpu-release-addr = <0 0x01f00200>; + }; + cpu@3 { + device_type = "cpu"; + model = "PowerPC,4xx"; // real CPU changed in sim + reg = <3>; + clock-frequency = <100000000>; // 100Mhz :-) + timebase-frequency = <100000000>; + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + status = "disabled"; + enable-method = "spin-table"; + cpu-release-addr = <0 0x01f00300>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000>; // Filled in by zImage + + }; + + MPIC: interrupt-controller { + compatible = "chrp,open-pic"; + interrupt-controller; + dcr-reg = <0xffc00000 0x00030000>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + + }; + + plb { + compatible = "ibm,plb-4xx", "ibm,plb4"; /* Could be PLB6, doesn't matter */ + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; // Filled in by zImage + + POB0: opb { + compatible = "ibm,opb-4xx", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + /* Wish there was a nicer way of specifying a full 32-bit + range */ + ranges = <0x00000000 0x00000001 0x00000000 0x80000000 + 0x80000000 0x00000001 0x80000000 0x80000000>; + clock-frequency = <0>; // Filled in by zImage + UART0: serial@40000200 { + device_type = "serial"; + compatible = "ns16550a"; + reg = <0x40000200 0x00000008>; + virtual-reg = <0xe0000200>; + clock-frequency = <11059200>; + current-speed = <115200>; + interrupt-parent = <&MPIC>; + interrupts = <0x0 0x2>; + }; + }; + }; + + nvrtc { + compatible = "ds1743-nvram", "ds1743", "rtc-ds1743"; + reg = <0 0xEF703000 0x2000>; + }; + iss-block { + compatible = "ibm,iss-sim-block-device"; + reg = <0 0xEF701000 0x1000>; + }; + + chosen { + linux,stdout-path = "/plb/opb/serial@40000200"; + }; +}; |