diff options
Diffstat (limited to 'arch/powerpc/boot/dts/katmai.dts')
| -rw-r--r-- | arch/powerpc/boot/dts/katmai.dts | 400 |
1 files changed, 400 insertions, 0 deletions
diff --git a/arch/powerpc/boot/dts/katmai.dts b/arch/powerpc/boot/dts/katmai.dts new file mode 100644 index 00000000000..9bdfc0ff3c2 --- /dev/null +++ b/arch/powerpc/boot/dts/katmai.dts @@ -0,0 +1,400 @@ +/* + * Device Tree Source for AMCC Katmai eval board + * + * Copyright (c) 2006, 2007 IBM Corp. + * Benjamin Herrenschmidt <benh@kernel.crashing.org> + * + * Copyright (c) 2006, 2007 IBM Corp. + * Josh Boyer <jwboyer@linux.vnet.ibm.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "amcc,katmai"; + compatible = "amcc,katmai"; + dcr-parent = <&/cpus/cpu@0>; + + aliases { + ethernet0 = &EMAC0; + serial0 = &UART0; + serial1 = &UART1; + serial2 = &UART2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,440SPe"; + reg = <0>; + clock-frequency = <0>; /* Filled in by zImage */ + timebase-frequency = <0>; /* Filled in by zImage */ + i-cache-line-size = <20>; + d-cache-line-size = <20>; + i-cache-size = <20000>; + d-cache-size = <20000>; + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0 0>; /* Filled in by zImage */ + }; + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-440spe","ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0c0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-440spe","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0d0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <1e 4 1f 4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC2: interrupt-controller2 { + compatible = "ibm,uic-440spe","ibm,uic"; + interrupt-controller; + cell-index = <2>; + dcr-reg = <0e0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <a 4 b 4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC3: interrupt-controller3 { + compatible = "ibm,uic-440spe","ibm,uic"; + interrupt-controller; + cell-index = <3>; + dcr-reg = <0f0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <10 4 11 4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + SDR0: sdr { + compatible = "ibm,sdr-440spe"; + dcr-reg = <00e 002>; + }; + + CPR0: cpr { + compatible = "ibm,cpr-440spe"; + dcr-reg = <00c 002>; + }; + + plb { + compatible = "ibm,plb-440spe", "ibm,plb-440gp", "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by zImage */ + + SDRAM0: sdram { + compatible = "ibm,sdram-440spe", "ibm,sdram-405gp"; + dcr-reg = <010 2>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-440spe", "ibm,mcmal2"; + dcr-reg = <180 62>; + num-tx-chans = <2>; + num-rx-chans = <1>; + interrupt-parent = <&MAL0>; + interrupts = <0 1 2 3 4>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*TXEOB*/ 0 &UIC1 6 4 + /*RXEOB*/ 1 &UIC1 7 4 + /*SERR*/ 2 &UIC1 1 4 + /*TXDE*/ 3 &UIC1 2 4 + /*RXDE*/ 4 &UIC1 3 4>; + }; + + POB0: opb { + compatible = "ibm,opb-440spe", "ibm,opb-440gp", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <00000000 4 e0000000 20000000>; + clock-frequency = <0>; /* Filled in by zImage */ + + EBC0: ebc { + compatible = "ibm,ebc-440spe", "ibm,ebc-440gp", "ibm,ebc"; + dcr-reg = <012 2>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by zImage */ + interrupts = <5 1>; + interrupt-parent = <&UIC1>; + }; + + UART0: serial@10000200 { + device_type = "serial"; + compatible = "ns16550"; + reg = <10000200 8>; + virtual-reg = <a0000200>; + clock-frequency = <0>; /* Filled in by zImage */ + current-speed = <1c200>; + interrupt-parent = <&UIC0>; + interrupts = <0 4>; + }; + + UART1: serial@10000300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <10000300 8>; + virtual-reg = <a0000300>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <1 4>; + }; + + + UART2: serial@10000600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <10000600 8>; + virtual-reg = <a0000600>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC1>; + interrupts = <5 4>; + }; + + IIC0: i2c@10000400 { + device_type = "i2c"; + compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic"; + reg = <10000400 14>; + interrupt-parent = <&UIC0>; + interrupts = <2 4>; + }; + + IIC1: i2c@10000500 { + device_type = "i2c"; + compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic"; + reg = <10000500 14>; + interrupt-parent = <&UIC0>; + interrupts = <3 4>; + }; + + EMAC0: ethernet@10000800 { + linux,network-index = <0>; + device_type = "network"; + compatible = "ibm,emac-440spe", "ibm,emac4"; + interrupt-parent = <&UIC1>; + interrupts = <1c 4 1d 4>; + reg = <10000800 70>; + local-mac-address = [000000000000]; + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <5dc>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "gmii"; + phy-map = <00000000>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + }; + + PCIX0: pci@c0ec00000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pcix-440spe", "ibm,plb-pcix"; + primary; + large-inbound-windows; + enable-msi-hole; + reg = <c 0ec00000 8 /* Config space access */ + 0 0 0 /* no IACK cycles */ + c 0ed00000 4 /* Special cycles */ + c 0ec80000 100 /* Internal registers */ + c 0ec80100 fc>; /* Internal messaging registers */ + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <02000000 0 80000000 0000000d 80000000 0 80000000 + 01000000 0 00000000 0000000c 08000000 0 00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <42000000 0 0 0 0 0 80000000>; + + /* This drives busses 0 to 0xf */ + bus-range = <0 f>; + + /* + * On Katmai, the following PCI-X interrupts signals + * have to be enabled via jumpers (only INTA is + * enabled per default): + * + * INTB: J3: 1-2 + * INTC: J2: 1-2 + * INTD: J1: 1-2 + */ + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + /* IDSEL 1 */ + 0800 0 0 1 &UIC1 14 8 + 0800 0 0 2 &UIC1 13 8 + 0800 0 0 3 &UIC1 12 8 + 0800 0 0 4 &UIC1 11 8 + >; + }; + + PCIE0: pciex@d00000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex"; + primary; + port = <0>; /* port number */ + reg = <d 00000000 20000000 /* Config space access */ + c 10000000 00001000>; /* Registers */ + dcr-reg = <100 020>; + sdr-base = <300>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <02000000 0 80000000 0000000e 00000000 0 80000000 + 01000000 0 00000000 0000000f 80000000 0 00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <42000000 0 0 0 0 0 80000000>; + + /* This drives busses 10 to 0x1f */ + bus-range = <10 1f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0000 0 0 7>; + interrupt-map = < + 0000 0 0 1 &UIC3 0 4 /* swizzled int A */ + 0000 0 0 2 &UIC3 1 4 /* swizzled int B */ + 0000 0 0 3 &UIC3 2 4 /* swizzled int C */ + 0000 0 0 4 &UIC3 3 4 /* swizzled int D */>; + }; + + PCIE1: pciex@d20000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex"; + primary; + port = <1>; /* port number */ + reg = <d 20000000 20000000 /* Config space access */ + c 10001000 00001000>; /* Registers */ + dcr-reg = <120 020>; + sdr-base = <340>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <02000000 0 80000000 0000000e 80000000 0 80000000 + 01000000 0 00000000 0000000f 80010000 0 00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <42000000 0 0 0 0 0 80000000>; + + /* This drives busses 10 to 0x1f */ + bus-range = <20 2f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0000 0 0 7>; + interrupt-map = < + 0000 0 0 1 &UIC3 4 4 /* swizzled int A */ + 0000 0 0 2 &UIC3 5 4 /* swizzled int B */ + 0000 0 0 3 &UIC3 6 4 /* swizzled int C */ + 0000 0 0 4 &UIC3 7 4 /* swizzled int D */>; + }; + + PCIE2: pciex@d40000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex"; + primary; + port = <2>; /* port number */ + reg = <d 40000000 20000000 /* Config space access */ + c 10002000 00001000>; /* Registers */ + dcr-reg = <140 020>; + sdr-base = <370>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <02000000 0 80000000 0000000f 00000000 0 80000000 + 01000000 0 00000000 0000000f 80020000 0 00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <42000000 0 0 0 0 0 80000000>; + + /* This drives busses 10 to 0x1f */ + bus-range = <30 3f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0000 0 0 7>; + interrupt-map = < + 0000 0 0 1 &UIC3 8 4 /* swizzled int A */ + 0000 0 0 2 &UIC3 9 4 /* swizzled int B */ + 0000 0 0 3 &UIC3 a 4 /* swizzled int C */ + 0000 0 0 4 &UIC3 b 4 /* swizzled int D */>; + }; + }; + + chosen { + linux,stdout-path = "/plb/opb/serial@10000200"; + }; +}; |