diff options
Diffstat (limited to 'arch/powerpc/boot/dts/katmai.dts')
| -rw-r--r-- | arch/powerpc/boot/dts/katmai.dts | 72 |
1 files changed, 53 insertions, 19 deletions
diff --git a/arch/powerpc/boot/dts/katmai.dts b/arch/powerpc/boot/dts/katmai.dts index 8f345de960c..7c3be5e4574 100644 --- a/arch/powerpc/boot/dts/katmai.dts +++ b/arch/powerpc/boot/dts/katmai.dts @@ -44,6 +44,7 @@ d-cache-size = <32768>; dcr-controller; dcr-access-method = "native"; + reset-type = <2>; /* Use chip-reset */ }; }; @@ -156,7 +157,7 @@ compatible = "ibm,opb-440spe", "ibm,opb-440gp", "ibm,opb"; #address-cells = <1>; #size-cells = <1>; - ranges = <0x00000000 0x00000004 0xe0000000 0x20000000>; + ranges = <0xe0000000 0x00000004 0xe0000000 0x20000000>; clock-frequency = <0>; /* Filled in by zImage */ EBC0: ebc { @@ -165,14 +166,47 @@ #address-cells = <2>; #size-cells = <1>; clock-frequency = <0>; /* Filled in by zImage */ + /* ranges property is supplied by U-Boot */ interrupts = <0x5 0x1>; interrupt-parent = <&UIC1>; + + nor_flash@0,0 { + compatible = "cfi-flash"; + bank-width = <2>; + reg = <0x00000000 0x00000000 0x01000000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "kernel"; + reg = <0x00000000 0x001e0000>; + }; + partition@1e0000 { + label = "dtb"; + reg = <0x001e0000 0x00020000>; + }; + partition@200000 { + label = "root"; + reg = <0x00200000 0x00200000>; + }; + partition@400000 { + label = "user"; + reg = <0x00400000 0x00b60000>; + }; + partition@f60000 { + label = "env"; + reg = <0x00f60000 0x00040000>; + }; + partition@fa0000 { + label = "u-boot"; + reg = <0x00fa0000 0x00060000>; + }; + }; }; - UART0: serial@10000200 { + UART0: serial@f0000200 { device_type = "serial"; compatible = "ns16550"; - reg = <0x10000200 0x00000008>; + reg = <0xf0000200 0x00000008>; virtual-reg = <0xa0000200>; clock-frequency = <0>; /* Filled in by zImage */ current-speed = <115200>; @@ -180,10 +214,10 @@ interrupts = <0x0 0x4>; }; - UART1: serial@10000300 { + UART1: serial@f0000300 { device_type = "serial"; compatible = "ns16550"; - reg = <0x10000300 0x00000008>; + reg = <0xf0000300 0x00000008>; virtual-reg = <0xa0000300>; clock-frequency = <0>; current-speed = <0>; @@ -192,10 +226,10 @@ }; - UART2: serial@10000600 { + UART2: serial@f0000600 { device_type = "serial"; compatible = "ns16550"; - reg = <0x10000600 0x00000008>; + reg = <0xf0000600 0x00000008>; virtual-reg = <0xa0000600>; clock-frequency = <0>; current-speed = <0>; @@ -203,27 +237,27 @@ interrupts = <0x5 0x4>; }; - IIC0: i2c@10000400 { + IIC0: i2c@f0000400 { compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic"; - reg = <0x10000400 0x00000014>; + reg = <0xf0000400 0x00000014>; interrupt-parent = <&UIC0>; interrupts = <0x2 0x4>; }; - IIC1: i2c@10000500 { + IIC1: i2c@f0000500 { compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic"; - reg = <0x10000500 0x00000014>; + reg = <0xf0000500 0x00000014>; interrupt-parent = <&UIC0>; interrupts = <0x3 0x4>; }; - EMAC0: ethernet@10000800 { + EMAC0: ethernet@f0000800 { linux,network-index = <0x0>; device_type = "network"; compatible = "ibm,emac-440spe", "ibm,emac4"; interrupt-parent = <&UIC1>; interrupts = <0x1c 0x4 0x1d 0x4>; - reg = <0x10000800 0x00000074>; + reg = <0xf0000800 0x00000074>; local-mac-address = [000000000000]; mal-device = <&MAL0>; mal-tx-channel = <0>; @@ -248,11 +282,11 @@ primary; large-inbound-windows; enable-msi-hole; - reg = <0x0000000c 0x0ec00000 0x00000008 /* Config space access */ - 0x00000000 0x00000000 0x00000000 /* no IACK cycles */ - 0x0000000c 0x0ed00000 0x00000004 /* Special cycles */ - 0x0000000c 0x0ec80000 0x00000100 /* Internal registers */ - 0x0000000c 0x0ec80100 0x000000fc>; /* Internal messaging registers */ + reg = <0x0000000c 0x0ec00000 0x00000008 /* Config space access */ + 0x00000000 0x00000000 0x00000000 /* no IACK cycles */ + 0x0000000c 0x0ed00000 0x00000004 /* Special cycles */ + 0x0000000c 0x0ec80000 0x00000100 /* Internal registers */ + 0x0000000c 0x0ec80100 0x000000fc>; /* Internal messaging registers */ /* Outbound ranges, one memory and one IO, * later cannot be changed @@ -453,6 +487,6 @@ }; chosen { - linux,stdout-path = "/plb/opb/serial@10000200"; + linux,stdout-path = "/plb/opb/serial@f0000200"; }; }; |