diff options
Diffstat (limited to 'arch/powerpc/boot/dts/mpc8315erdb.dts')
| -rw-r--r-- | arch/powerpc/boot/dts/mpc8315erdb.dts | 100 |
1 files changed, 50 insertions, 50 deletions
diff --git a/arch/powerpc/boot/dts/mpc8315erdb.dts b/arch/powerpc/boot/dts/mpc8315erdb.dts index e157f2342ea..b582032ba3d 100644 --- a/arch/powerpc/boot/dts/mpc8315erdb.dts +++ b/arch/powerpc/boot/dts/mpc8315erdb.dts @@ -30,7 +30,7 @@ PowerPC,8315@0 { device_type = "cpu"; - reg = <0>; + reg = <0x0>; d-cache-line-size = <32>; i-cache-line-size = <32>; d-cache-size = <16384>; @@ -51,22 +51,22 @@ #size-cells = <1>; compatible = "fsl,mpc8315-elbc", "fsl,elbc", "simple-bus"; reg = <0xe0005000 0x1000>; - interrupts = <77 8>; + interrupts = <77 0x8>; interrupt-parent = <&ipic>; // CS0 and CS1 are swapped when // booting from nand, but the // addresses are the same. - ranges = <0 0 0xfe000000 0x00800000 - 1 0 0xe0600000 0x00002000 - 2 0 0xf0000000 0x00020000 - 3 0 0xfa000000 0x00008000>; + ranges = <0x0 0x0 0xfe000000 0x00800000 + 0x1 0x0 0xe0600000 0x00002000 + 0x2 0x0 0xf0000000 0x00020000 + 0x3 0x0 0xfa000000 0x00008000>; flash@0,0 { #address-cells = <1>; #size-cells = <1>; compatible = "cfi-flash"; - reg = <0 0 0x800000>; + reg = <0x0 0x0 0x800000>; bank-width = <2>; device-width = <1>; }; @@ -76,7 +76,7 @@ #size-cells = <1>; compatible = "fsl,mpc8315-fcm-nand", "fsl,elbc-fcm-nand"; - reg = <1 0 0x2000>; + reg = <0x1 0x0 0x2000>; u-boot@0 { reg = <0x0 0x100000>; @@ -113,8 +113,8 @@ cell-index = <0>; compatible = "fsl-i2c"; reg = <0x3000 0x100>; - interrupts = <14 8>; - interrupt-parent = < &ipic >; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; dfsrr; rtc@68 { device_type = "rtc"; @@ -127,8 +127,8 @@ cell-index = <0>; compatible = "fsl,spi"; reg = <0x7000 0x1000>; - interrupts = <16 8>; - interrupt-parent = < &ipic >; + interrupts = <16 0x8>; + interrupt-parent = <&ipic>; mode = "cpu"; }; @@ -137,8 +137,8 @@ reg = <0x23000 0x1000>; #address-cells = <1>; #size-cells = <0>; - interrupt-parent = < &ipic >; - interrupts = <38 8>; + interrupt-parent = <&ipic>; + interrupts = <38 0x8>; phy_type = "utmi"; }; @@ -148,15 +148,15 @@ compatible = "fsl,gianfar-mdio"; reg = <0x24520 0x20>; phy0: ethernet-phy@0 { - interrupt-parent = < &ipic >; - interrupts = <20 8>; - reg = <0>; + interrupt-parent = <&ipic>; + interrupts = <20 0x8>; + reg = <0x0>; device_type = "ethernet-phy"; }; phy1: ethernet-phy@1 { - interrupt-parent = < &ipic >; - interrupts = <19 8>; - reg = <1>; + interrupt-parent = <&ipic>; + interrupts = <19 0x8>; + reg = <0x1>; device_type = "ethernet-phy"; }; }; @@ -168,8 +168,8 @@ compatible = "gianfar"; reg = <0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <32 8 33 8 34 8>; - interrupt-parent = < &ipic >; + interrupts = <32 0x8 33 0x8 34 0x8>; + interrupt-parent = <&ipic>; phy-handle = < &phy0 >; }; @@ -180,8 +180,8 @@ compatible = "gianfar"; reg = <0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <35 8 36 8 37 8>; - interrupt-parent = < &ipic >; + interrupts = <35 0x8 36 0x8 37 0x8>; + interrupt-parent = <&ipic>; phy-handle = < &phy1 >; }; @@ -191,8 +191,8 @@ compatible = "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; - interrupts = <9 8>; - interrupt-parent = < &ipic >; + interrupts = <9 0x8>; + interrupt-parent = <&ipic>; }; serial1: serial@4600 { @@ -201,8 +201,8 @@ compatible = "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; - interrupts = <10 8>; - interrupt-parent = < &ipic >; + interrupts = <10 0x8>; + interrupt-parent = <&ipic>; }; crypto@30000 { @@ -210,8 +210,8 @@ device_type = "crypto"; compatible = "talitos"; reg = <0x30000 0x10000>; - interrupts = <11 8>; - interrupt-parent = < &ipic >; + interrupts = <11 0x8>; + interrupt-parent = <&ipic>; /* Rev. 3.0 geometry */ num-channels = <4>; channel-fifo-len = <24>; @@ -223,16 +223,16 @@ compatible = "fsl,mpc8315-sata", "fsl,pq-sata"; reg = <0x18000 0x1000>; cell-index = <1>; - interrupts = <44 8>; - interrupt-parent = < &ipic >; + interrupts = <44 0x8>; + interrupt-parent = <&ipic>; }; sata@19000 { compatible = "fsl,mpc8315-sata", "fsl,pq-sata"; reg = <0x19000 0x1000>; cell-index = <2>; - interrupts = <45 8>; - interrupt-parent = < &ipic >; + interrupts = <45 0x8>; + interrupt-parent = <&ipic>; }; /* IPIC @@ -251,28 +251,28 @@ }; pci0: pci@e0008500 { - interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x0E -mini PCI */ - 0x7000 0 0 1 &ipic 18 8 - 0x7000 0 0 2 &ipic 18 8 - 0x7000 0 0 3 &ipic 18 8 - 0x7000 0 0 4 &ipic 18 8 + 0x7000 0x0 0x0 0x1 &ipic 18 0x8 + 0x7000 0x0 0x0 0x2 &ipic 18 0x8 + 0x7000 0x0 0x0 0x3 &ipic 18 0x8 + 0x7000 0x0 0x0 0x4 &ipic 18 0x8 /* IDSEL 0x0F -mini PCI */ - 0x7800 0 0 1 &ipic 17 8 - 0x7800 0 0 2 &ipic 17 8 - 0x7800 0 0 3 &ipic 17 8 - 0x7800 0 0 4 &ipic 17 8 + 0x7800 0x0 0x0 0x1 &ipic 17 0x8 + 0x7800 0x0 0x0 0x2 &ipic 17 0x8 + 0x7800 0x0 0x0 0x3 &ipic 17 0x8 + 0x7800 0x0 0x0 0x4 &ipic 17 0x8 /* IDSEL 0x10 - PCI slot */ - 0x8000 0 0 1 &ipic 48 8 - 0x8000 0 0 2 &ipic 17 8 - 0x8000 0 0 3 &ipic 48 8 - 0x8000 0 0 4 &ipic 17 8>; - interrupt-parent = < &ipic >; - interrupts = <66 8>; - bus-range = <0 0>; + 0x8000 0x0 0x0 0x1 &ipic 48 0x8 + 0x8000 0x0 0x0 0x2 &ipic 17 0x8 + 0x8000 0x0 0x0 0x3 &ipic 48 0x8 + 0x8000 0x0 0x0 0x4 &ipic 17 0x8>; + interrupt-parent = <&ipic>; + interrupts = <66 0x8>; + bus-range = <0x0 0x0>; ranges = <0x02000000 0 0x90000000 0x90000000 0 0x10000000 0x42000000 0 0x80000000 0x80000000 0 0x10000000 0x01000000 0 0x00000000 0xe0300000 0 0x00100000>; |