diff options
Diffstat (limited to 'arch/powerpc/boot/dts/mpc8349emitx.dts')
-rw-r--r-- | arch/powerpc/boot/dts/mpc8349emitx.dts | 155 |
1 files changed, 79 insertions, 76 deletions
diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts index 4a4ddea2d99..9426676b0b7 100644 --- a/arch/powerpc/boot/dts/mpc8349emitx.dts +++ b/arch/powerpc/boot/dts/mpc8349emitx.dts @@ -8,6 +8,9 @@ * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ + +/dts-v1/; + / { model = "MPC8349EMITX"; compatible = "MPC8349EMITX", "MPC834xMITX", "MPC83xxMITX"; @@ -29,11 +32,11 @@ PowerPC,8349@0 { device_type = "cpu"; - reg = <0>; - d-cache-line-size = <20>; - i-cache-line-size = <20>; - d-cache-size = <8000>; - i-cache-size = <8000>; + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; timebase-frequency = <0>; // from bootloader bus-frequency = <0>; // from bootloader clock-frequency = <0>; // from bootloader @@ -42,21 +45,21 @@ memory { device_type = "memory"; - reg = <00000000 10000000>; + reg = <0x00000000 0x10000000>; }; soc8349@e0000000 { #address-cells = <1>; #size-cells = <1>; device_type = "soc"; - ranges = <0 e0000000 00100000>; - reg = <e0000000 00000200>; + ranges = <0x0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00000200>; bus-frequency = <0>; // from bootloader wdt@200 { device_type = "watchdog"; compatible = "mpc83xx_wdt"; - reg = <200 100>; + reg = <0x200 0x100>; }; i2c@3000 { @@ -64,9 +67,9 @@ #size-cells = <0>; cell-index = <0>; compatible = "fsl-i2c"; - reg = <3000 100>; - interrupts = <e 8>; - interrupt-parent = < &ipic >; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; dfsrr; }; @@ -75,39 +78,39 @@ #size-cells = <0>; cell-index = <1>; compatible = "fsl-i2c"; - reg = <3100 100>; - interrupts = <f 8>; - interrupt-parent = < &ipic >; + reg = <0x3100 0x100>; + interrupts = <15 0x8>; + interrupt-parent = <&ipic>; dfsrr; }; spi@7000 { cell-index = <0>; compatible = "fsl,spi"; - reg = <7000 1000>; - interrupts = <10 8>; - interrupt-parent = < &ipic >; + reg = <0x7000 0x1000>; + interrupts = <16 0x8>; + interrupt-parent = <&ipic>; mode = "cpu"; }; usb@22000 { compatible = "fsl-usb2-mph"; - reg = <22000 1000>; + reg = <0x22000 0x1000>; #address-cells = <1>; #size-cells = <0>; - interrupt-parent = < &ipic >; - interrupts = <27 8>; + interrupt-parent = <&ipic>; + interrupts = <39 0x8>; phy_type = "ulpi"; port1; }; usb@23000 { compatible = "fsl-usb2-dr"; - reg = <23000 1000>; + reg = <0x23000 0x1000>; #address-cells = <1>; #size-cells = <0>; - interrupt-parent = < &ipic >; - interrupts = <26 8>; + interrupt-parent = <&ipic>; + interrupts = <38 0x8>; dr_mode = "peripheral"; phy_type = "ulpi"; }; @@ -116,13 +119,13 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,gianfar-mdio"; - reg = <24520 20>; + reg = <0x24520 0x20>; /* Vitesse 8201 */ phy1c: ethernet-phy@1c { - interrupt-parent = < &ipic >; - interrupts = <12 8>; - reg = <1c>; + interrupt-parent = <&ipic>; + interrupts = <18 0x8>; + reg = <0x1c>; device_type = "ethernet-phy"; }; }; @@ -132,11 +135,11 @@ device_type = "network"; model = "TSEC"; compatible = "gianfar"; - reg = <24000 1000>; + reg = <0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <20 8 21 8 22 8>; - interrupt-parent = < &ipic >; - phy-handle = < &phy1c >; + interrupts = <32 0x8 33 0x8 34 0x8>; + interrupt-parent = <&ipic>; + phy-handle = <&phy1c>; linux,network-index = <0>; }; @@ -145,12 +148,12 @@ device_type = "network"; model = "TSEC"; compatible = "gianfar"; - reg = <25000 1000>; + reg = <0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <23 8 24 8 25 8>; - interrupt-parent = < &ipic >; + interrupts = <35 0x8 36 0x8 37 0x8>; + interrupt-parent = <&ipic>; /* Vitesse 7385 isn't on the MDIO bus */ - fixed-link = <1 1 d#1000 0 0>; + fixed-link = <1 1 1000 0 0>; linux,network-index = <1>; }; @@ -158,88 +161,88 @@ cell-index = <0>; device_type = "serial"; compatible = "ns16550"; - reg = <4500 100>; + reg = <0x4500 0x100>; clock-frequency = <0>; // from bootloader - interrupts = <9 8>; - interrupt-parent = < &ipic >; + interrupts = <9 0x8>; + interrupt-parent = <&ipic>; }; serial1: serial@4600 { cell-index = <1>; device_type = "serial"; compatible = "ns16550"; - reg = <4600 100>; + reg = <0x4600 0x100>; clock-frequency = <0>; // from bootloader - interrupts = <a 8>; - interrupt-parent = < &ipic >; + interrupts = <10 0x8>; + interrupt-parent = <&ipic>; }; crypto@30000 { device_type = "crypto"; model = "SEC2"; compatible = "talitos"; - reg = <30000 10000>; - interrupts = <b 8>; - interrupt-parent = < &ipic >; + reg = <0x30000 0x10000>; + interrupts = <11 0x8>; + interrupt-parent = <&ipic>; num-channels = <4>; - channel-fifo-len = <18>; - exec-units-mask = <0000007e>; - descriptor-types-mask = <01010ebf>; + channel-fifo-len = <24>; + exec-units-mask = <0x0000007e>; + descriptor-types-mask = <0x01010ebf>; }; ipic: pic@700 { interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; - reg = <700 100>; + reg = <0x700 0x100>; device_type = "ipic"; }; }; pci0: pci@e0008500 { cell-index = <1>; - interrupt-map-mask = <f800 0 0 7>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x10 - SATA */ - 8000 0 0 1 &ipic 16 8 /* SATA_INTA */ + 0x8000 0x0 0x0 0x1 &ipic 22 0x8 /* SATA_INTA */ >; - interrupt-parent = < &ipic >; - interrupts = <42 8>; - bus-range = <0 0>; - ranges = <42000000 0 80000000 80000000 0 10000000 - 02000000 0 90000000 90000000 0 10000000 - 01000000 0 00000000 e2000000 0 01000000>; - clock-frequency = <3f940aa>; + interrupt-parent = <&ipic>; + interrupts = <66 0x8>; + bus-range = <0x0 0x0>; + ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 + 0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x01000000>; + clock-frequency = <66666666>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <e0008500 100>; + reg = <0xe0008500 0x100>; compatible = "fsl,mpc8349-pci"; device_type = "pci"; }; pci1: pci@e0008600 { cell-index = <2>; - interrupt-map-mask = <f800 0 0 7>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x0E - MiniPCI Slot */ - 7000 0 0 1 &ipic 15 8 /* PCI_INTA */ + 0x7000 0x0 0x0 0x1 &ipic 21 0x8 /* PCI_INTA */ /* IDSEL 0x0F - PCI Slot */ - 7800 0 0 1 &ipic 14 8 /* PCI_INTA */ - 7800 0 0 2 &ipic 15 8 /* PCI_INTB */ - >; - interrupt-parent = < &ipic >; - interrupts = <43 8>; - bus-range = <0 0>; - ranges = <42000000 0 a0000000 a0000000 0 10000000 - 02000000 0 b0000000 b0000000 0 10000000 - 01000000 0 00000000 e3000000 0 01000000>; - clock-frequency = <3f940aa>; + 0x7800 0x0 0x0 0x1 &ipic 20 0x8 /* PCI_INTA */ + 0x7800 0x0 0x0 0x2 &ipic 21 0x8 /* PCI_INTB */ + >; + interrupt-parent = <&ipic>; + interrupts = <67 0x8>; + bus-range = <0x0 0x0>; + ranges = <0x42000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000 + 0x02000000 0x0 0xb0000000 0xb0000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe3000000 0x0 0x01000000>; + clock-frequency = <66666666>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <e0008600 100>; + reg = <0xe0008600 0x100>; compatible = "fsl,mpc8349-pci"; device_type = "pci"; }; @@ -249,15 +252,15 @@ #size-cells = <1>; compatible = "fsl,mpc8349e-localbus", "fsl,pq2pro-localbus"; - reg = <e0005000 d8>; - ranges = <3 0 f0000000 210>; + reg = <0xe0005000 0xd8>; + ranges = <0x3 0x0 0xf0000000 0x210>; pata@3,0 { compatible = "fsl,mpc8349emitx-pata", "ata-generic"; - reg = <3 0 10 3 20c 4>; + reg = <0x3 0x0 0x10 0x3 0x20c 0x4>; reg-shift = <1>; pio-mode = <6>; - interrupts = <17 8>; + interrupts = <23 0x8>; interrupt-parent = <&ipic>; }; }; |