diff options
Diffstat (limited to 'arch/powerpc/boot/dts/mpc8560ads.dts')
-rw-r--r-- | arch/powerpc/boot/dts/mpc8560ads.dts | 267 |
1 files changed, 134 insertions, 133 deletions
diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts index 16dbe848cec..6b362f8222c 100644 --- a/arch/powerpc/boot/dts/mpc8560ads.dts +++ b/arch/powerpc/boot/dts/mpc8560ads.dts @@ -30,7 +30,6 @@ timebase-frequency = <04ead9a0>; bus-frequency = <13ab6680>; clock-frequency = <312c8040>; - 32-bit; }; }; @@ -42,7 +41,6 @@ soc8560@e0000000 { #address-cells = <1>; #size-cells = <1>; - #interrupt-cells = <2>; device_type = "soc"; ranges = <0 e0000000 00100000>; reg = <e0000000 00000200>; @@ -132,115 +130,39 @@ phy-handle = <&phy1>; }; - pci@8000 { - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; - device_type = "pci"; - reg = <8000 1000>; - clock-frequency = <3f940aa>; - interrupt-map-mask = <f800 0 0 7>; - interrupt-map = < - - /* IDSEL 0x2 */ - 1000 0 0 1 &mpic 1 1 - 1000 0 0 2 &mpic 2 1 - 1000 0 0 3 &mpic 3 1 - 1000 0 0 4 &mpic 4 1 - - /* IDSEL 0x3 */ - 1800 0 0 1 &mpic 4 1 - 1800 0 0 2 &mpic 1 1 - 1800 0 0 3 &mpic 2 1 - 1800 0 0 4 &mpic 3 1 - - /* IDSEL 0x4 */ - 2000 0 0 1 &mpic 3 1 - 2000 0 0 2 &mpic 4 1 - 2000 0 0 3 &mpic 1 1 - 2000 0 0 4 &mpic 2 1 - - /* IDSEL 0x5 */ - 2800 0 0 1 &mpic 2 1 - 2800 0 0 2 &mpic 3 1 - 2800 0 0 3 &mpic 4 1 - 2800 0 0 4 &mpic 1 1 - - /* IDSEL 12 */ - 6000 0 0 1 &mpic 1 1 - 6000 0 0 2 &mpic 2 1 - 6000 0 0 3 &mpic 3 1 - 6000 0 0 4 &mpic 4 1 - - /* IDSEL 13 */ - 6800 0 0 1 &mpic 4 1 - 6800 0 0 2 &mpic 1 1 - 6800 0 0 3 &mpic 2 1 - 6800 0 0 4 &mpic 3 1 - - /* IDSEL 14*/ - 7000 0 0 1 &mpic 3 1 - 7000 0 0 2 &mpic 4 1 - 7000 0 0 3 &mpic 1 1 - 7000 0 0 4 &mpic 2 1 - - /* IDSEL 15 */ - 7800 0 0 1 &mpic 2 1 - 7800 0 0 2 &mpic 3 1 - 7800 0 0 3 &mpic 4 1 - 7800 0 0 4 &mpic 1 1 - - /* IDSEL 18 */ - 9000 0 0 1 &mpic 1 1 - 9000 0 0 2 &mpic 2 1 - 9000 0 0 3 &mpic 3 1 - 9000 0 0 4 &mpic 4 1 - - /* IDSEL 19 */ - 9800 0 0 1 &mpic 4 1 - 9800 0 0 2 &mpic 1 1 - 9800 0 0 3 &mpic 2 1 - 9800 0 0 4 &mpic 3 1 - - /* IDSEL 20 */ - a000 0 0 1 &mpic 3 1 - a000 0 0 2 &mpic 4 1 - a000 0 0 3 &mpic 1 1 - a000 0 0 4 &mpic 2 1 - - /* IDSEL 21 */ - a800 0 0 1 &mpic 2 1 - a800 0 0 2 &mpic 3 1 - a800 0 0 3 &mpic 4 1 - a800 0 0 4 &mpic 1 1>; - - interrupt-parent = <&mpic>; - interrupts = <18 2>; - bus-range = <0 0>; - ranges = <02000000 0 80000000 80000000 0 20000000 - 01000000 0 00000000 e2000000 0 01000000>; - }; - mpic: pic@40000 { interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; reg = <40000 40000>; - built-in; device_type = "open-pic"; }; - cpm@e0000000 { + cpm@919c0 { #address-cells = <1>; #size-cells = <1>; - #interrupt-cells = <2>; - device_type = "cpm"; - model = "CPM2"; - ranges = <0 0 c0000>; - reg = <80000 40000>; - command-proc = <919c0>; - brg-frequency = <9d5b340>; + compatible = "fsl,mpc8560-cpm", "fsl,cpm2"; + reg = <919c0 30>; + ranges; + + muram@80000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 80000 10000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0 4000 9000 2000>; + }; + }; + + brg@919f0 { + compatible = "fsl,mpc8560-brg", + "fsl,cpm2-brg", + "fsl,cpm-brg"; + reg = <919f0 10 915f0 10>; + clock-frequency = <d#165000000>; + }; cpmpic: pic@90c00 { interrupt-controller; @@ -249,44 +171,38 @@ interrupts = <2e 2>; interrupt-parent = <&mpic>; reg = <90c00 80>; - built-in; - device_type = "cpm-pic"; + compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic"; }; - scc@91a00 { + serial@91a00 { device_type = "serial"; - compatible = "cpm_uart"; - model = "SCC"; - device-id = <1>; + compatible = "fsl,mpc8560-scc-uart", + "fsl,cpm2-scc-uart"; reg = <91a00 20 88000 100>; - clock-setup = <00ffffff 0>; - rx-clock = <1>; - tx-clock = <1>; + fsl,cpm-brg = <1>; + fsl,cpm-command = <00800000>; current-speed = <1c200>; interrupts = <28 8>; interrupt-parent = <&cpmpic>; }; - scc@91a20 { + serial@91a20 { device_type = "serial"; - compatible = "cpm_uart"; - model = "SCC"; - device-id = <2>; + compatible = "fsl,mpc8560-scc-uart", + "fsl,cpm2-scc-uart"; reg = <91a20 20 88100 100>; - clock-setup = <ff00ffff 90000>; - rx-clock = <2>; - tx-clock = <2>; + fsl,cpm-brg = <2>; + fsl,cpm-command = <04a00000>; current-speed = <1c200>; interrupts = <29 8>; interrupt-parent = <&cpmpic>; }; - fcc@91320 { + ethernet@91320 { device_type = "network"; - compatible = "fs_enet"; - model = "FCC"; - device-id = <2>; - reg = <91320 20 88500 100 913a0 30>; + compatible = "fsl,mpc8560-fcc-enet", + "fsl,cpm2-fcc-enet"; + reg = <91320 20 88500 100 913b0 1>; /* * mac-address is deprecated and will be removed * in 2.6.25. Only recent versions of @@ -294,20 +210,17 @@ */ mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ]; - clock-setup = <ff00ffff 250000>; - rx-clock = <15>; - tx-clock = <16>; + fsl,cpm-command = <16200300>; interrupts = <21 8>; interrupt-parent = <&cpmpic>; phy-handle = <&phy2>; }; - fcc@91340 { + ethernet@91340 { device_type = "network"; - compatible = "fs_enet"; - model = "FCC"; - device-id = <3>; - reg = <91340 20 88600 100 913d0 30>; + compatible = "fsl,mpc8560-fcc-enet", + "fsl,cpm2-fcc-enet"; + reg = <91340 20 88600 100 913d0 1>; /* * mac-address is deprecated and will be removed * in 2.6.25. Only recent versions of @@ -315,13 +228,101 @@ */ mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ]; - clock-setup = <ffff00ff 3700>; - rx-clock = <17>; - tx-clock = <18>; + fsl,cpm-command = <1a400300>; interrupts = <22 8>; interrupt-parent = <&cpmpic>; phy-handle = <&phy3>; }; }; }; + + pci@e0008000 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; + device_type = "pci"; + reg = <e0008000 1000>; + clock-frequency = <3f940aa>; + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x2 */ + 1000 0 0 1 &mpic 1 1 + 1000 0 0 2 &mpic 2 1 + 1000 0 0 3 &mpic 3 1 + 1000 0 0 4 &mpic 4 1 + + /* IDSEL 0x3 */ + 1800 0 0 1 &mpic 4 1 + 1800 0 0 2 &mpic 1 1 + 1800 0 0 3 &mpic 2 1 + 1800 0 0 4 &mpic 3 1 + + /* IDSEL 0x4 */ + 2000 0 0 1 &mpic 3 1 + 2000 0 0 2 &mpic 4 1 + 2000 0 0 3 &mpic 1 1 + 2000 0 0 4 &mpic 2 1 + + /* IDSEL 0x5 */ + 2800 0 0 1 &mpic 2 1 + 2800 0 0 2 &mpic 3 1 + 2800 0 0 3 &mpic 4 1 + 2800 0 0 4 &mpic 1 1 + + /* IDSEL 12 */ + 6000 0 0 1 &mpic 1 1 + 6000 0 0 2 &mpic 2 1 + 6000 0 0 3 &mpic 3 1 + 6000 0 0 4 &mpic 4 1 + + /* IDSEL 13 */ + 6800 0 0 1 &mpic 4 1 + 6800 0 0 2 &mpic 1 1 + 6800 0 0 3 &mpic 2 1 + 6800 0 0 4 &mpic 3 1 + + /* IDSEL 14*/ + 7000 0 0 1 &mpic 3 1 + 7000 0 0 2 &mpic 4 1 + 7000 0 0 3 &mpic 1 1 + 7000 0 0 4 &mpic 2 1 + + /* IDSEL 15 */ + 7800 0 0 1 &mpic 2 1 + 7800 0 0 2 &mpic 3 1 + 7800 0 0 3 &mpic 4 1 + 7800 0 0 4 &mpic 1 1 + + /* IDSEL 18 */ + 9000 0 0 1 &mpic 1 1 + 9000 0 0 2 &mpic 2 1 + 9000 0 0 3 &mpic 3 1 + 9000 0 0 4 &mpic 4 1 + + /* IDSEL 19 */ + 9800 0 0 1 &mpic 4 1 + 9800 0 0 2 &mpic 1 1 + 9800 0 0 3 &mpic 2 1 + 9800 0 0 4 &mpic 3 1 + + /* IDSEL 20 */ + a000 0 0 1 &mpic 3 1 + a000 0 0 2 &mpic 4 1 + a000 0 0 3 &mpic 1 1 + a000 0 0 4 &mpic 2 1 + + /* IDSEL 21 */ + a800 0 0 1 &mpic 2 1 + a800 0 0 2 &mpic 3 1 + a800 0 0 3 &mpic 4 1 + a800 0 0 4 &mpic 1 1>; + + interrupt-parent = <&mpic>; + interrupts = <18 2>; + bus-range = <0 0>; + ranges = <02000000 0 80000000 80000000 0 20000000 + 01000000 0 00000000 e2000000 0 01000000>; + }; }; |