diff options
Diffstat (limited to 'arch/powerpc/boot/dts/mpc8568mds.dts')
| -rw-r--r-- | arch/powerpc/boot/dts/mpc8568mds.dts | 96 |
1 files changed, 39 insertions, 57 deletions
diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts index 06d24653e42..bf49d8c997b 100644 --- a/arch/powerpc/boot/dts/mpc8568mds.dts +++ b/arch/powerpc/boot/dts/mpc8568mds.dts @@ -16,16 +16,14 @@ / { model = "MPC8568EMDS"; - compatible = "MPC85xxMDS"; + compatible = "MPC8568EMDS", "MPC85xxMDS"; #address-cells = <1>; #size-cells = <1>; - linux,phandle = <100>; cpus { #cpus = <1>; #address-cells = <1>; #size-cells = <0>; - linux,phandle = <200>; PowerPC,8568@0 { device_type = "cpu"; @@ -38,13 +36,11 @@ bus-frequency = <0>; clock-frequency = <0>; 32-bit; - linux,phandle = <201>; }; }; memory { device_type = "memory"; - linux,phandle = <300>; reg = <00000000 10000000>; }; @@ -67,7 +63,7 @@ compatible = "fsl-i2c"; reg = <3000 100>; interrupts = <1b 2>; - interrupt-parent = <40000>; + interrupt-parent = <&mpic>; dfsrr; }; @@ -76,7 +72,7 @@ compatible = "fsl-i2c"; reg = <3100 100>; interrupts = <1b 2>; - interrupt-parent = <40000>; + interrupt-parent = <&mpic>; dfsrr; }; @@ -86,32 +82,26 @@ device_type = "mdio"; compatible = "gianfar"; reg = <24520 20>; - linux,phandle = <24520>; - ethernet-phy@0 { - linux,phandle = <2452000>; - interrupt-parent = <40000>; + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; interrupts = <31 1>; reg = <0>; device_type = "ethernet-phy"; }; - ethernet-phy@1 { - linux,phandle = <2452001>; - interrupt-parent = <40000>; + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; interrupts = <32 1>; reg = <1>; device_type = "ethernet-phy"; }; - - ethernet-phy@2 { - linux,phandle = <2452002>; - interrupt-parent = <40000>; + phy2: ethernet-phy@2 { + interrupt-parent = <&mpic>; interrupts = <31 1>; reg = <2>; device_type = "ethernet-phy"; }; - ethernet-phy@3 { - linux,phandle = <2452003>; - interrupt-parent = <40000>; + phy3: ethernet-phy@3 { + interrupt-parent = <&mpic>; interrupts = <32 1>; reg = <3>; device_type = "ethernet-phy"; @@ -127,8 +117,8 @@ reg = <24000 1000>; mac-address = [ 00 00 00 00 00 00 ]; interrupts = <d 2 e 2 12 2>; - interrupt-parent = <40000>; - phy-handle = <2452002>; + interrupt-parent = <&mpic>; + phy-handle = <&phy2>; }; ethernet@25000 { @@ -140,8 +130,8 @@ reg = <25000 1000>; mac-address = [ 00 00 00 00 00 00]; interrupts = <13 2 14 2 18 2>; - interrupt-parent = <40000>; - phy-handle = <2452003>; + interrupt-parent = <&mpic>; + phy-handle = <&phy3>; }; serial@4500 { @@ -150,7 +140,7 @@ reg = <4500 100>; clock-frequency = <0>; interrupts = <1a 2>; - interrupt-parent = <40000>; + interrupt-parent = <&mpic>; }; serial@4600 { @@ -159,7 +149,7 @@ reg = <4600 100>; clock-frequency = <0>; interrupts = <1a 2>; - interrupt-parent = <40000>; + interrupt-parent = <&mpic>; }; crypto@30000 { @@ -168,15 +158,14 @@ compatible = "talitos"; reg = <30000 f000>; interrupts = <1d 2>; - interrupt-parent = <40000>; + interrupt-parent = <&mpic>; num-channels = <4>; channel-fifo-len = <18>; exec-units-mask = <000000fe>; descriptor-types-mask = <012b0ebf>; }; - pic@40000 { - linux,phandle = <40000>; + mpic: pic@40000 { clock-frequency = <0>; interrupt-controller; #address-cells = <0>; @@ -192,8 +181,7 @@ device_type = "par_io"; num-ports = <7>; - ucc_pin@01 { - linux,phandle = <e010001>; + pio1: ucc_pin@01 { pio-map = < /* port pin dir open_drain assignment has_irq */ 4 0a 1 0 2 0 /* TxD0 */ @@ -220,8 +208,7 @@ 4 13 1 0 2 0 /* GTX_CLK */ 1 1f 2 0 3 0>; /* GTX125 */ }; - ucc_pin@02 { - linux,phandle = <e010002>; + pio2: ucc_pin@02 { pio-map = < /* port pin dir open_drain assignment has_irq */ 5 0a 1 0 2 0 /* TxD0 */ @@ -277,7 +264,7 @@ compatible = "fsl_spi"; reg = <4c0 40>; interrupts = <2>; - interrupt-parent = <80>; + interrupt-parent = <&qeic>; mode = "cpu"; }; @@ -286,7 +273,7 @@ compatible = "fsl_spi"; reg = <500 40>; interrupts = <1>; - interrupt-parent = <80>; + interrupt-parent = <&qeic>; mode = "cpu"; }; @@ -297,12 +284,12 @@ device-id = <1>; reg = <2000 200>; interrupts = <20>; - interrupt-parent = <80>; + interrupt-parent = <&qeic>; mac-address = [ 00 04 9f 00 23 23 ]; rx-clock = <0>; tx-clock = <19>; - phy-handle = <212000>; - pio-handle = <e010001>; + phy-handle = <&qe_phy0>; + pio-handle = <&pio1>; }; ucc@3000 { @@ -312,12 +299,12 @@ device-id = <2>; reg = <3000 200>; interrupts = <21>; - interrupt-parent = <80>; + interrupt-parent = <&qeic>; mac-address = [ 00 11 22 33 44 55 ]; rx-clock = <0>; tx-clock = <14>; - phy-handle = <212001>; - pio-handle = <e010002>; + phy-handle = <&qe_phy1>; + pio-handle = <&pio2>; }; mdio@2120 { @@ -329,33 +316,29 @@ /* These are the same PHYs as on * gianfar's MDIO bus */ - ethernet-phy@00 { - linux,phandle = <212000>; - interrupt-parent = <40000>; + qe_phy0: ethernet-phy@00 { + interrupt-parent = <&mpic>; interrupts = <31 1>; reg = <0>; device_type = "ethernet-phy"; interface = <6>; //ENET_1000_GMII }; - ethernet-phy@01 { - linux,phandle = <212001>; - interrupt-parent = <40000>; + qe_phy1: ethernet-phy@01 { + interrupt-parent = <&mpic>; interrupts = <32 1>; reg = <1>; device_type = "ethernet-phy"; interface = <6>; }; - ethernet-phy@02 { - linux,phandle = <212002>; - interrupt-parent = <40000>; + qe_phy2: ethernet-phy@02 { + interrupt-parent = <&mpic>; interrupts = <31 1>; reg = <2>; device_type = "ethernet-phy"; interface = <6>; //ENET_1000_GMII }; - ethernet-phy@03 { - linux,phandle = <212003>; - interrupt-parent = <40000>; + qe_phy3: ethernet-phy@03 { + interrupt-parent = <&mpic>; interrupts = <32 1>; reg = <3>; device_type = "ethernet-phy"; @@ -363,8 +346,7 @@ }; }; - qeic@80 { - linux,phandle = <80>; + qeic: qeic@80 { interrupt-controller; device_type = "qeic"; #address-cells = <0>; @@ -373,7 +355,7 @@ built-in; big-endian; interrupts = <1e 2 1e 2>; //high:30 low:30 - interrupt-parent = <40000>; + interrupt-parent = <&mpic>; }; }; |