diff options
Diffstat (limited to 'arch/powerpc/boot/dts/mpc8641_hpcn.dts')
| -rw-r--r-- | arch/powerpc/boot/dts/mpc8641_hpcn.dts | 56 |
1 files changed, 32 insertions, 24 deletions
diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts index 35d5e248ccd..4481532cbe7 100644 --- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts +++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts @@ -26,7 +26,13 @@ serial1 = &serial1; pci0 = &pci0; pci1 = &pci1; - rapidio0 = &rapidio0; +/* + * Only one of Rapid IO or PCI can be present due to HW limitations and + * due to the fact that the 2 now share address space in the new memory + * map. The most likely case is that we have PCI, so comment out the + * rapidio node. Leave it here for reference. + */ + /* rapidio0 = &rapidio0; */ }; cpus { @@ -62,18 +68,17 @@ reg = <0x00000000 0x40000000>; // 1G at 0x0 }; - localbus@f8005000 { + localbus@ffe05000 { #address-cells = <2>; #size-cells = <1>; compatible = "fsl,mpc8641-localbus", "simple-bus"; - reg = <0xf8005000 0x1000>; + reg = <0xffe05000 0x1000>; interrupts = <19 2>; interrupt-parent = <&mpic>; - ranges = <0 0 0xff800000 0x00800000 - 1 0 0xfe000000 0x01000000 - 2 0 0xf8200000 0x00100000 - 3 0 0xf8100000 0x00100000>; + ranges = <0 0 0xef800000 0x00800000 + 2 0 0xffdf8000 0x00008000 + 3 0 0xffdf0000 0x00008000>; flash@0,0 { compatible = "cfi-flash"; @@ -103,13 +108,13 @@ }; }; - soc8641@f8000000 { + soc8641@ffe00000 { #address-cells = <1>; #size-cells = <1>; device_type = "soc"; compatible = "simple-bus"; - ranges = <0x00000000 0xf8000000 0x00100000>; - reg = <0xf8000000 0x00001000>; // CCSRBAR + ranges = <0x00000000 0xffe00000 0x00100000>; + reg = <0xffe00000 0x00001000>; // CCSRBAR bus-frequency = <0>; i2c@3000 { @@ -340,17 +345,17 @@ }; }; - pci0: pcie@f8008000 { + pci0: pcie@ffe08000 { cell-index = <0>; compatible = "fsl,mpc8641-pcie"; device_type = "pci"; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <0xf8008000 0x1000>; + reg = <0xffe08000 0x1000>; bus-range = <0x0 0xff>; ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000 - 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>; + 0x01000000 0x0 0x00000000 0xffc00000 0x0 0x00010000>; clock-frequency = <33333333>; interrupt-parent = <&mpic>; interrupts = <24 2>; @@ -481,7 +486,7 @@ 0x01000000 0x0 0x00000000 0x01000000 0x0 0x00000000 - 0x0 0x00100000>; + 0x0 0x00010000>; uli1575@0 { reg = <0 0 0 0 0>; #size-cells = <2>; @@ -491,7 +496,7 @@ 0x0 0x20000000 0x01000000 0x0 0x00000000 0x01000000 0x0 0x00000000 - 0x0 0x00100000>; + 0x0 0x00010000>; isa@1e { device_type = "isa"; #interrupt-cells = <2>; @@ -549,17 +554,17 @@ }; - pci1: pcie@f8009000 { + pci1: pcie@ffe09000 { cell-index = <1>; compatible = "fsl,mpc8641-pcie"; device_type = "pci"; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <0xf8009000 0x1000>; + reg = <0xffe09000 0x1000>; bus-range = <0 0xff>; ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 - 0x01000000 0x0 0x00000000 0xe3000000 0x0 0x00100000>; + 0x01000000 0x0 0x00000000 0xffc10000 0x0 0x00010000>; clock-frequency = <33333333>; interrupt-parent = <&mpic>; interrupts = <25 2>; @@ -582,18 +587,21 @@ 0x01000000 0x0 0x00000000 0x01000000 0x0 0x00000000 - 0x0 0x00100000>; + 0x0 0x00010000>; }; }; - rapidio0: rapidio@f80c0000 { +/* + rapidio0: rapidio@ffec0000 { #address-cells = <2>; #size-cells = <2>; compatible = "fsl,rapidio-delta"; - reg = <0xf80c0000 0x20000>; - ranges = <0 0 0xc0000000 0 0x20000000>; + reg = <0xffec0000 0x20000>; + ranges = <0 0 0x80000000 0 0x20000000>; interrupt-parent = <&mpic>; - /* err_irq bell_outb_irq bell_inb_irq - msg1_tx_irq msg1_rx_irq msg2_tx_irq msg2_rx_irq */ + // err_irq bell_outb_irq bell_inb_irq + // msg1_tx_irq msg1_rx_irq msg2_tx_irq msg2_rx_irq interrupts = <48 2 49 2 50 2 53 2 54 2 55 2 56 2>; }; +*/ + }; |