diff options
Diffstat (limited to 'arch/powerpc/boot/dts/p1022ds.dts')
| -rw-r--r-- | arch/powerpc/boot/dts/p1022ds.dts | 274 |
1 files changed, 0 insertions, 274 deletions
diff --git a/arch/powerpc/boot/dts/p1022ds.dts b/arch/powerpc/boot/dts/p1022ds.dts deleted file mode 100644 index ef95717db4b..00000000000 --- a/arch/powerpc/boot/dts/p1022ds.dts +++ /dev/null @@ -1,274 +0,0 @@ -/* - * P1022 DS 36Bit Physical Address Map Device Tree Source - * - * Copyright 2010 Freescale Semiconductor, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -/include/ "fsl/p1022si-pre.dtsi" -/ { - model = "fsl,P1022DS"; - compatible = "fsl,P1022DS"; - - memory { - device_type = "memory"; - }; - - lbc: localbus@fffe05000 { - reg = <0xf 0xffe05000 0 0x1000>; - ranges = <0x0 0x0 0xf 0xe8000000 0x08000000 - 0x1 0x0 0xf 0xe0000000 0x08000000 - 0x2 0x0 0xf 0xff800000 0x00040000 - 0x3 0x0 0xf 0xffdf0000 0x00008000>; - - /* - * This node is used to access the pixis via "indirect" mode, - * which is done by writing the pixis register index to chip - * select 0 and the value to/from chip select 1. Indirect - * mode is the only way to access the pixis when DIU video - * is enabled. Note that this assumes that the first column - * of the 'ranges' property above is the chip select number. - */ - board-control@0,0 { - compatible = "fsl,p1022ds-indirect-pixis"; - reg = <0x0 0x0 1 /* CS0 */ - 0x1 0x0 1>; /* CS1 */ - }; - - nor@0,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "cfi-flash"; - reg = <0x0 0x0 0x8000000>; - bank-width = <2>; - device-width = <1>; - - partition@0 { - reg = <0x0 0x03000000>; - label = "ramdisk-nor"; - read-only; - }; - - partition@3000000 { - reg = <0x03000000 0x00e00000>; - label = "diagnostic-nor"; - read-only; - }; - - partition@3e00000 { - reg = <0x03e00000 0x00200000>; - label = "dink-nor"; - read-only; - }; - - partition@4000000 { - reg = <0x04000000 0x00400000>; - label = "kernel-nor"; - read-only; - }; - - partition@4400000 { - reg = <0x04400000 0x03b00000>; - label = "jffs2-nor"; - }; - - partition@7f00000 { - reg = <0x07f00000 0x00080000>; - label = "dtb-nor"; - read-only; - }; - - partition@7f80000 { - reg = <0x07f80000 0x00080000>; - label = "u-boot-nor"; - read-only; - }; - }; - - nand@2,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,elbc-fcm-nand"; - reg = <0x2 0x0 0x40000>; - - partition@0 { - reg = <0x0 0x02000000>; - label = "u-boot-nand"; - read-only; - }; - - partition@2000000 { - reg = <0x02000000 0x10000000>; - label = "jffs2-nand"; - }; - - partition@12000000 { - reg = <0x12000000 0x10000000>; - label = "ramdisk-nand"; - read-only; - }; - - partition@22000000 { - reg = <0x22000000 0x04000000>; - label = "kernel-nand"; - }; - - partition@26000000 { - reg = <0x26000000 0x01000000>; - label = "dtb-nand"; - read-only; - }; - - partition@27000000 { - reg = <0x27000000 0x19000000>; - label = "reserved-nand"; - }; - }; - - board-control@3,0 { - compatible = "fsl,p1022ds-fpga", "fsl,fpga-ngpixis"; - reg = <3 0 0x30>; - interrupt-parent = <&mpic>; - /* - * IRQ8 is generated if the "EVENT" switch is pressed - * and PX_CTL[EVESEL] is set to 00. - */ - interrupts = <8 8 0 0>; - }; - }; - - soc: soc@fffe00000 { - ranges = <0x0 0xf 0xffe00000 0x100000>; - - i2c@3100 { - wm8776:codec@1a { - compatible = "wlf,wm8776"; - reg = <0x1a>; - /* - * clock-frequency will be set by U-Boot if - * the clock is enabled. - */ - }; - }; - - spi@7000 { - flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "spansion,s25sl12801"; - reg = <0>; - spi-max-frequency = <40000000>; /* input clock */ - - partition@0 { - label = "u-boot-spi"; - reg = <0x00000000 0x00100000>; - read-only; - }; - partition@100000 { - label = "kernel-spi"; - reg = <0x00100000 0x00500000>; - read-only; - }; - partition@600000 { - label = "dtb-spi"; - reg = <0x00600000 0x00100000>; - read-only; - }; - partition@700000 { - label = "file system-spi"; - reg = <0x00700000 0x00900000>; - }; - }; - }; - - ssi@15000 { - fsl,mode = "i2s-slave"; - codec-handle = <&wm8776>; - fsl,ssi-asynchronous; - }; - - usb@22000 { - phy_type = "ulpi"; - }; - - usb@23000 { - status = "disabled"; - }; - - mdio@24000 { - phy0: ethernet-phy@0 { - interrupts = <3 1 0 0>; - reg = <0x1>; - }; - phy1: ethernet-phy@1 { - interrupts = <9 1 0 0>; - reg = <0x2>; - }; - tbi-phy@2 { - device_type = "tbi-phy"; - reg = <0x2>; - }; - }; - - ethernet@b0000 { - phy-handle = <&phy0>; - phy-connection-type = "rgmii-id"; - }; - - ethernet@b1000 { - phy-handle = <&phy1>; - phy-connection-type = "rgmii-id"; - }; - }; - - pci0: pcie@fffe09000 { - reg = <0xf 0xffe09000 0 0x1000>; - ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 - 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; - pcie@0 { - ranges = <0x2000000 0x0 0xe0000000 - 0x2000000 0x0 0xe0000000 - 0x0 0x20000000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x100000>; - }; - }; - - pci1: pcie@fffe0a000 { - reg = <0xf 0xffe0a000 0 0x1000>; - ranges = <0x2000000 0x0 0xe0000000 0xc 0x40000000 0x0 0x20000000 - 0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x10000>; - pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - ranges = <0x2000000 0x0 0xe0000000 - 0x2000000 0x0 0xe0000000 - 0x0 0x20000000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x100000>; - }; - }; - - pci2: pcie@fffe0b000 { - reg = <0xf 0xffe0b000 0 0x1000>; - ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000 - 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>; - pcie@0 { - ranges = <0x2000000 0x0 0xe0000000 - 0x2000000 0x0 0xe0000000 - 0x0 0x20000000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x100000>; - }; - }; -}; - -/include/ "fsl/p1022si-post.dtsi" |