summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/boot/dts/p1022ds.dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/boot/dts/p1022ds.dts')
-rw-r--r--arch/powerpc/boot/dts/p1022ds.dts274
1 files changed, 0 insertions, 274 deletions
diff --git a/arch/powerpc/boot/dts/p1022ds.dts b/arch/powerpc/boot/dts/p1022ds.dts
deleted file mode 100644
index ef95717db4b..00000000000
--- a/arch/powerpc/boot/dts/p1022ds.dts
+++ /dev/null
@@ -1,274 +0,0 @@
-/*
- * P1022 DS 36Bit Physical Address Map Device Tree Source
- *
- * Copyright 2010 Freescale Semiconductor, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/include/ "fsl/p1022si-pre.dtsi"
-/ {
- model = "fsl,P1022DS";
- compatible = "fsl,P1022DS";
-
- memory {
- device_type = "memory";
- };
-
- lbc: localbus@fffe05000 {
- reg = <0xf 0xffe05000 0 0x1000>;
- ranges = <0x0 0x0 0xf 0xe8000000 0x08000000
- 0x1 0x0 0xf 0xe0000000 0x08000000
- 0x2 0x0 0xf 0xff800000 0x00040000
- 0x3 0x0 0xf 0xffdf0000 0x00008000>;
-
- /*
- * This node is used to access the pixis via "indirect" mode,
- * which is done by writing the pixis register index to chip
- * select 0 and the value to/from chip select 1. Indirect
- * mode is the only way to access the pixis when DIU video
- * is enabled. Note that this assumes that the first column
- * of the 'ranges' property above is the chip select number.
- */
- board-control@0,0 {
- compatible = "fsl,p1022ds-indirect-pixis";
- reg = <0x0 0x0 1 /* CS0 */
- 0x1 0x0 1>; /* CS1 */
- };
-
- nor@0,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "cfi-flash";
- reg = <0x0 0x0 0x8000000>;
- bank-width = <2>;
- device-width = <1>;
-
- partition@0 {
- reg = <0x0 0x03000000>;
- label = "ramdisk-nor";
- read-only;
- };
-
- partition@3000000 {
- reg = <0x03000000 0x00e00000>;
- label = "diagnostic-nor";
- read-only;
- };
-
- partition@3e00000 {
- reg = <0x03e00000 0x00200000>;
- label = "dink-nor";
- read-only;
- };
-
- partition@4000000 {
- reg = <0x04000000 0x00400000>;
- label = "kernel-nor";
- read-only;
- };
-
- partition@4400000 {
- reg = <0x04400000 0x03b00000>;
- label = "jffs2-nor";
- };
-
- partition@7f00000 {
- reg = <0x07f00000 0x00080000>;
- label = "dtb-nor";
- read-only;
- };
-
- partition@7f80000 {
- reg = <0x07f80000 0x00080000>;
- label = "u-boot-nor";
- read-only;
- };
- };
-
- nand@2,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,elbc-fcm-nand";
- reg = <0x2 0x0 0x40000>;
-
- partition@0 {
- reg = <0x0 0x02000000>;
- label = "u-boot-nand";
- read-only;
- };
-
- partition@2000000 {
- reg = <0x02000000 0x10000000>;
- label = "jffs2-nand";
- };
-
- partition@12000000 {
- reg = <0x12000000 0x10000000>;
- label = "ramdisk-nand";
- read-only;
- };
-
- partition@22000000 {
- reg = <0x22000000 0x04000000>;
- label = "kernel-nand";
- };
-
- partition@26000000 {
- reg = <0x26000000 0x01000000>;
- label = "dtb-nand";
- read-only;
- };
-
- partition@27000000 {
- reg = <0x27000000 0x19000000>;
- label = "reserved-nand";
- };
- };
-
- board-control@3,0 {
- compatible = "fsl,p1022ds-fpga", "fsl,fpga-ngpixis";
- reg = <3 0 0x30>;
- interrupt-parent = <&mpic>;
- /*
- * IRQ8 is generated if the "EVENT" switch is pressed
- * and PX_CTL[EVESEL] is set to 00.
- */
- interrupts = <8 8 0 0>;
- };
- };
-
- soc: soc@fffe00000 {
- ranges = <0x0 0xf 0xffe00000 0x100000>;
-
- i2c@3100 {
- wm8776:codec@1a {
- compatible = "wlf,wm8776";
- reg = <0x1a>;
- /*
- * clock-frequency will be set by U-Boot if
- * the clock is enabled.
- */
- };
- };
-
- spi@7000 {
- flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "spansion,s25sl12801";
- reg = <0>;
- spi-max-frequency = <40000000>; /* input clock */
-
- partition@0 {
- label = "u-boot-spi";
- reg = <0x00000000 0x00100000>;
- read-only;
- };
- partition@100000 {
- label = "kernel-spi";
- reg = <0x00100000 0x00500000>;
- read-only;
- };
- partition@600000 {
- label = "dtb-spi";
- reg = <0x00600000 0x00100000>;
- read-only;
- };
- partition@700000 {
- label = "file system-spi";
- reg = <0x00700000 0x00900000>;
- };
- };
- };
-
- ssi@15000 {
- fsl,mode = "i2s-slave";
- codec-handle = <&wm8776>;
- fsl,ssi-asynchronous;
- };
-
- usb@22000 {
- phy_type = "ulpi";
- };
-
- usb@23000 {
- status = "disabled";
- };
-
- mdio@24000 {
- phy0: ethernet-phy@0 {
- interrupts = <3 1 0 0>;
- reg = <0x1>;
- };
- phy1: ethernet-phy@1 {
- interrupts = <9 1 0 0>;
- reg = <0x2>;
- };
- tbi-phy@2 {
- device_type = "tbi-phy";
- reg = <0x2>;
- };
- };
-
- ethernet@b0000 {
- phy-handle = <&phy0>;
- phy-connection-type = "rgmii-id";
- };
-
- ethernet@b1000 {
- phy-handle = <&phy1>;
- phy-connection-type = "rgmii-id";
- };
- };
-
- pci0: pcie@fffe09000 {
- reg = <0xf 0xffe09000 0 0x1000>;
- ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
- 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
- pcie@0 {
- ranges = <0x2000000 0x0 0xe0000000
- 0x2000000 0x0 0xe0000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x100000>;
- };
- };
-
- pci1: pcie@fffe0a000 {
- reg = <0xf 0xffe0a000 0 0x1000>;
- ranges = <0x2000000 0x0 0xe0000000 0xc 0x40000000 0x0 0x20000000
- 0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x10000>;
- pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- ranges = <0x2000000 0x0 0xe0000000
- 0x2000000 0x0 0xe0000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x100000>;
- };
- };
-
- pci2: pcie@fffe0b000 {
- reg = <0xf 0xffe0b000 0 0x1000>;
- ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
- 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
- pcie@0 {
- ranges = <0x2000000 0x0 0xe0000000
- 0x2000000 0x0 0xe0000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x100000>;
- };
- };
-};
-
-/include/ "fsl/p1022si-post.dtsi"