diff options
Diffstat (limited to 'arch/powerpc/boot/dts/p2020ds.dts')
-rw-r--r-- | arch/powerpc/boot/dts/p2020ds.dts | 353 |
1 files changed, 19 insertions, 334 deletions
diff --git a/arch/powerpc/boot/dts/p2020ds.dts b/arch/powerpc/boot/dts/p2020ds.dts index 66f03d6477b..237310cc7e6 100644 --- a/arch/powerpc/boot/dts/p2020ds.dts +++ b/arch/powerpc/boot/dts/p2020ds.dts @@ -9,30 +9,17 @@ * option) any later version. */ -/include/ "p2020si.dtsi" +/include/ "fsl/p2020si-pre.dtsi" / { model = "fsl,P2020DS"; compatible = "fsl,P2020DS"; - aliases { - ethernet0 = &enet0; - ethernet1 = &enet1; - ethernet2 = &enet2; - serial0 = &serial0; - serial1 = &serial1; - pci0 = &pci0; - pci1 = &pci1; - pci2 = &pci2; - }; - - memory { device_type = "memory"; }; - localbus@ffe05000 { - compatible = "fsl,elbc", "simple-bus"; + board_lbc: lbc: localbus@ffe05000 { ranges = <0x0 0x0 0x0 0xe8000000 0x08000000 0x1 0x0 0x0 0xe0000000 0x08000000 0x2 0x0 0x0 0xffa00000 0x00040000 @@ -40,203 +27,18 @@ 0x4 0x0 0x0 0xffa40000 0x00040000 0x5 0x0 0x0 0xffa80000 0x00040000 0x6 0x0 0x0 0xffac0000 0x00040000>; - - nor@0,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "cfi-flash"; - reg = <0x0 0x0 0x8000000>; - bank-width = <2>; - device-width = <1>; - - ramdisk@0 { - reg = <0x0 0x03000000>; - read-only; - }; - - diagnostic@3000000 { - reg = <0x03000000 0x00e00000>; - read-only; - }; - - dink@3e00000 { - reg = <0x03e00000 0x00200000>; - read-only; - }; - - kernel@4000000 { - reg = <0x04000000 0x00400000>; - read-only; - }; - - jffs2@4400000 { - reg = <0x04400000 0x03b00000>; - }; - - dtb@7f00000 { - reg = <0x07f00000 0x00080000>; - read-only; - }; - - u-boot@7f80000 { - reg = <0x07f80000 0x00080000>; - read-only; - }; - }; - - nand@2,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,elbc-fcm-nand"; - reg = <0x2 0x0 0x40000>; - - u-boot@0 { - reg = <0x0 0x02000000>; - read-only; - }; - - jffs2@2000000 { - reg = <0x02000000 0x10000000>; - }; - - ramdisk@12000000 { - reg = <0x12000000 0x08000000>; - read-only; - }; - - kernel@1a000000 { - reg = <0x1a000000 0x04000000>; - }; - - dtb@1e000000 { - reg = <0x1e000000 0x01000000>; - read-only; - }; - - empty@1f000000 { - reg = <0x1f000000 0x21000000>; - }; - }; - - board-control@3,0 { - compatible = "fsl,p2020ds-fpga", "fsl,fpga-ngpixis"; - reg = <0x3 0x0 0x30>; - }; - - nand@4,0 { - compatible = "fsl,elbc-fcm-nand"; - reg = <0x4 0x0 0x40000>; - }; - - nand@5,0 { - compatible = "fsl,elbc-fcm-nand"; - reg = <0x5 0x0 0x40000>; - }; - - nand@6,0 { - compatible = "fsl,elbc-fcm-nand"; - reg = <0x6 0x0 0x40000>; - }; + reg = <0 0xffe05000 0 0x1000>; }; - soc@ffe00000 { - - usb@22000 { - phy_type = "ulpi"; - }; - - mdio@24520 { - phy0: ethernet-phy@0 { - interrupt-parent = <&mpic>; - interrupts = <3 1>; - reg = <0x0>; - }; - phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <3 1>; - reg = <0x1>; - }; - phy2: ethernet-phy@2 { - interrupt-parent = <&mpic>; - interrupts = <3 1>; - reg = <0x2>; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - - }; - - mdio@25520 { - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - mdio@26520 { - tbi2: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - - }; - - ptp_clock@24E00 { - compatible = "fsl,etsec-ptp"; - reg = <0x24E00 0xB0>; - interrupts = <68 2 69 2 70 2>; - interrupt-parent = < &mpic >; - fsl,tclk-period = <5>; - fsl,tmr-prsc = <200>; - fsl,tmr-add = <0xCCCCCCCD>; - fsl,tmr-fiper1 = <0x3B9AC9FB>; - fsl,tmr-fiper2 = <0x0001869B>; - fsl,max-adj = <249999999>; - }; - - enet0: ethernet@24000 { - tbi-handle = <&tbi0>; - phy-handle = <&phy0>; - phy-connection-type = "rgmii-id"; - }; - - enet1: ethernet@25000 { - tbi-handle = <&tbi1>; - phy-handle = <&phy1>; - phy-connection-type = "rgmii-id"; - - }; - - enet2: ethernet@26000 { - tbi-handle = <&tbi2>; - phy-handle = <&phy2>; - phy-connection-type = "rgmii-id"; - }; - - - msi@41600 { - compatible = "fsl,mpic-msi"; - }; + board_soc: soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; }; - pci0: pcie@ffe08000 { + pci2: pcie@ffe08000 { ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0x0 0x0 0x1 &mpic 0x8 0x1 - 0000 0x0 0x0 0x2 &mpic 0x9 0x1 - 0000 0x0 0x0 0x3 &mpic 0xa 0x1 - 0000 0x0 0x0 0x4 &mpic 0xb 0x1 - >; + reg = <0 0xffe08000 0 0x1000>; pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x2000000 0x0 0x80000000 0x2000000 0x0 0x80000000 0x0 0x20000000 @@ -247,61 +49,11 @@ }; }; - pci1: pcie@ffe09000 { + board_pci1: pci1: pcie@ffe09000 { ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; - interrupt-map-mask = <0xff00 0x0 0x0 0x7>; - interrupt-map = < - - // IDSEL 0x11 func 0 - PCI slot 1 - 0x8800 0x0 0x0 0x1 &i8259 0x9 0x2 - 0x8800 0x0 0x0 0x2 &i8259 0xa 0x2 - - // IDSEL 0x11 func 1 - PCI slot 1 - 0x8900 0x0 0x0 0x1 &i8259 0x9 0x2 - 0x8900 0x0 0x0 0x2 &i8259 0xa 0x2 - - // IDSEL 0x11 func 2 - PCI slot 1 - 0x8a00 0x0 0x0 0x1 &i8259 0x9 0x2 - 0x8a00 0x0 0x0 0x2 &i8259 0xa 0x2 - - // IDSEL 0x11 func 3 - PCI slot 1 - 0x8b00 0x0 0x0 0x1 &i8259 0x9 0x2 - 0x8b00 0x0 0x0 0x2 &i8259 0xa 0x2 - - // IDSEL 0x11 func 4 - PCI slot 1 - 0x8c00 0x0 0x0 0x1 &i8259 0x9 0x2 - 0x8c00 0x0 0x0 0x2 &i8259 0xa 0x2 - - // IDSEL 0x11 func 5 - PCI slot 1 - 0x8d00 0x0 0x0 0x1 &i8259 0x9 0x2 - 0x8d00 0x0 0x0 0x2 &i8259 0xa 0x2 - - // IDSEL 0x11 func 6 - PCI slot 1 - 0x8e00 0x0 0x0 0x1 &i8259 0x9 0x2 - 0x8e00 0x0 0x0 0x2 &i8259 0xa 0x2 - - // IDSEL 0x11 func 7 - PCI slot 1 - 0x8f00 0x0 0x0 0x1 &i8259 0x9 0x2 - 0x8f00 0x0 0x0 0x2 &i8259 0xa 0x2 - - // IDSEL 0x1d Audio - 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2 - - // IDSEL 0x1e Legacy - 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2 - 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2 - - // IDSEL 0x1f IDE/SATA - 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2 - 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2 - >; - + reg = <0 0xffe09000 0 0x1000>; pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x2000000 0x0 0xa0000000 0x2000000 0x0 0xa0000000 0x0 0x20000000 @@ -309,89 +61,14 @@ 0x1000000 0x0 0x0 0x1000000 0x0 0x0 0x0 0x10000>; - uli1575@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - ranges = <0x2000000 0x0 0xa0000000 - 0x2000000 0x0 0xa0000000 - 0x0 0x20000000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x10000>; - isa@1e { - device_type = "isa"; - #interrupt-cells = <2>; - #size-cells = <1>; - #address-cells = <2>; - reg = <0xf000 0x0 0x0 0x0 0x0>; - ranges = <0x1 0x0 0x1000000 0x0 0x0 - 0x1000>; - interrupt-parent = <&i8259>; - - i8259: interrupt-controller@20 { - reg = <0x1 0x20 0x2 - 0x1 0xa0 0x2 - 0x1 0x4d0 0x2>; - interrupt-controller; - device_type = "interrupt-controller"; - #address-cells = <0>; - #interrupt-cells = <2>; - compatible = "chrp,iic"; - interrupts = <4 1>; - interrupt-parent = <&mpic>; - }; - - i8042@60 { - #size-cells = <0>; - #address-cells = <1>; - reg = <0x1 0x60 0x1 0x1 0x64 0x1>; - interrupts = <1 3 12 3>; - interrupt-parent = - <&i8259>; - - keyboard@0 { - reg = <0x0>; - compatible = "pnpPNP,303"; - }; - - mouse@1 { - reg = <0x1>; - compatible = "pnpPNP,f03"; - }; - }; - - rtc@70 { - compatible = "pnpPNP,b00"; - reg = <0x1 0x70 0x2>; - }; - - gpio@400 { - reg = <0x1 0x400 0x80>; - }; - }; - }; }; - }; - pci2: pcie@ffe0a000 { + pci0: pcie@ffe0a000 { ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0x0 0x0 0x1 &mpic 0x0 0x1 - 0000 0x0 0x0 0x2 &mpic 0x1 0x1 - 0000 0x0 0x0 0x3 &mpic 0x2 0x1 - 0000 0x0 0x0 0x4 &mpic 0x3 0x1 - >; + reg = <0 0xffe0a000 0 0x1000>; pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; ranges = <0x2000000 0x0 0xc0000000 0x2000000 0x0 0xc0000000 0x0 0x20000000 @@ -402,3 +79,11 @@ }; }; }; + +/* + * p2020ds.dtsi must be last to ensure board_pci0 overrides pci0 settings + * for interrupt-map & interrupt-map-mask + */ + +/include/ "fsl/p2020si-post.dtsi" +/include/ "p2020ds.dtsi" |