summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/boot/dts/pcm030.dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/boot/dts/pcm030.dts')
-rw-r--r--arch/powerpc/boot/dts/pcm030.dts182
1 files changed, 68 insertions, 114 deletions
diff --git a/arch/powerpc/boot/dts/pcm030.dts b/arch/powerpc/boot/dts/pcm030.dts
index be2c11ca059..89583471389 100644
--- a/arch/powerpc/boot/dts/pcm030.dts
+++ b/arch/powerpc/boot/dts/pcm030.dts
@@ -19,6 +19,7 @@
compatible = "phytec,pcm030";
#address-cells = <1>;
#size-cells = <1>;
+ interrupt-parent = <&mpc5200_pic>;
cpus {
#address-cells = <1>;
@@ -29,26 +30,26 @@
reg = <0>;
d-cache-line-size = <32>;
i-cache-line-size = <32>;
- d-cache-size = <0x4000>; /* L1, 16K */
- i-cache-size = <0x4000>; /* L1, 16K */
- timebase-frequency = <0>; /* From Bootloader */
- bus-frequency = <0>; /* From Bootloader */
- clock-frequency = <0>; /* From Bootloader */
+ d-cache-size = <0x4000>; // L1, 16K
+ i-cache-size = <0x4000>; // L1, 16K
+ timebase-frequency = <0>; // from bootloader
+ bus-frequency = <0>; // from bootloader
+ clock-frequency = <0>; // from bootloader
};
};
memory {
device_type = "memory";
- reg = <0x00000000 0x04000000>; /* 64MB */
+ reg = <0x00000000 0x04000000>; // 64MB
};
soc5200@f0000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc5200b-immr";
- ranges = <0x0 0xf0000000 0x0000c000>;
- bus-frequency = <0>; /* From bootloader */
- system-frequency = <0>; /* From bootloader */
+ ranges = <0 0xf0000000 0x0000c000>;
+ bus-frequency = <0>; // from bootloader
+ system-frequency = <0>; // from bootloader
cdm@200 {
compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
@@ -56,87 +57,70 @@
};
mpc5200_pic: interrupt-controller@500 {
- /* 5200 interrupts are encoded into two levels; */
+ // 5200 interrupts are encoded into two levels;
interrupt-controller;
#interrupt-cells = <3>;
- device_type = "interrupt-controller";
compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
reg = <0x500 0x80>;
};
- timer@600 { /* General Purpose Timer */
+ timer@600 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- cell-index = <0>;
reg = <0x600 0x10>;
- interrupts = <0x1 0x9 0x0>;
- interrupt-parent = <&mpc5200_pic>;
+ interrupts = <1 9 0>;
fsl,has-wdt;
};
- timer@610 { /* General Purpose Timer */
+ timer@610 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- cell-index = <1>;
reg = <0x610 0x10>;
- interrupts = <0x1 0xa 0x0>;
- interrupt-parent = <&mpc5200_pic>;
+ interrupts = <1 10 0>;
};
- gpt2: timer@620 { /* General Purpose Timer in GPIO mode */
+ gpt2: timer@620 { // General Purpose Timer in GPIO mode
compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
- cell-index = <2>;
reg = <0x620 0x10>;
- interrupts = <0x1 0xb 0x0>;
- interrupt-parent = <&mpc5200_pic>;
+ interrupts = <1 11 0>;
gpio-controller;
#gpio-cells = <2>;
};
- gpt3: timer@630 { /* General Purpose Timer in GPIO mode */
+ gpt3: timer@630 { // General Purpose Timer in GPIO mode
compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
- cell-index = <3>;
reg = <0x630 0x10>;
- interrupts = <0x1 0xc 0x0>;
- interrupt-parent = <&mpc5200_pic>;
+ interrupts = <1 12 0>;
gpio-controller;
#gpio-cells = <2>;
};
- gpt4: timer@640 { /* General Purpose Timer in GPIO mode */
+ gpt4: timer@640 { // General Purpose Timer in GPIO mode
compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
- cell-index = <4>;
reg = <0x640 0x10>;
- interrupts = <0x1 0xd 0x0>;
- interrupt-parent = <&mpc5200_pic>;
+ interrupts = <1 13 0>;
gpio-controller;
#gpio-cells = <2>;
};
- gpt5: timer@650 { /* General Purpose Timer in GPIO mode */
+ gpt5: timer@650 { // General Purpose Timer in GPIO mode
compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
- cell-index = <5>;
reg = <0x650 0x10>;
- interrupts = <0x1 0xe 0x0>;
- interrupt-parent = <&mpc5200_pic>;
+ interrupts = <1 14 0>;
gpio-controller;
#gpio-cells = <2>;
};
- gpt6: timer@660 { /* General Purpose Timer in GPIO mode */
+ gpt6: timer@660 { // General Purpose Timer in GPIO mode
compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
- cell-index = <6>;
reg = <0x660 0x10>;
- interrupts = <0x1 0xf 0x0>;
- interrupt-parent = <&mpc5200_pic>;
+ interrupts = <1 15 0>;
gpio-controller;
#gpio-cells = <2>;
};
- gpt7: timer@670 { /* General Purpose Timer in GPIO mode */
+ gpt7: timer@670 { // General Purpose Timer in GPIO mode
compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
- cell-index = <7>;
reg = <0x670 0x10>;
- interrupts = <0x1 0x10 0x0>;
- interrupt-parent = <&mpc5200_pic>;
+ interrupts = <1 16 0>;
gpio-controller;
#gpio-cells = <2>;
};
@@ -144,40 +128,33 @@
rtc@800 { // Real time clock
compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
reg = <0x800 0x100>;
- interrupts = <0x1 0x5 0x0 0x1 0x6 0x0>;
- interrupt-parent = <&mpc5200_pic>;
+ interrupts = <1 5 0 1 6 0>;
};
can@900 {
compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
- cell-index = <0>;
- interrupts = <0x2 0x11 0x0>;
- interrupt-parent = <&mpc5200_pic>;
+ interrupts = <2 17 0>;
reg = <0x900 0x80>;
};
can@980 {
compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
- cell-index = <1>;
- interrupts = <0x2 0x12 0x0>;
- interrupt-parent = <&mpc5200_pic>;
+ interrupts = <2 18 0>;
reg = <0x980 0x80>;
};
gpio_simple: gpio@b00 {
compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
reg = <0xb00 0x40>;
- interrupts = <0x1 0x7 0x0>;
- interrupt-parent = <&mpc5200_pic>;
+ interrupts = <1 7 0>;
gpio-controller;
#gpio-cells = <2>;
};
- gpio_wkup: gpio-wkup@c00 {
+ gpio_wkup: gpio@c00 {
compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
reg = <0xc00 0x40>;
- interrupts = <0x1 0x8 0x0 0x0 0x3 0x0>;
- interrupt-parent = <&mpc5200_pic>;
+ interrupts = <1 8 0 0 3 0>;
gpio-controller;
#gpio-cells = <2>;
};
@@ -185,26 +162,22 @@
spi@f00 {
compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
reg = <0xf00 0x20>;
- interrupts = <0x2 0xd 0x0 0x2 0xe 0x0>;
- interrupt-parent = <&mpc5200_pic>;
+ interrupts = <2 13 0 2 14 0>;
};
usb@1000 {
compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
reg = <0x1000 0xff>;
- interrupts = <0x2 0x6 0x0>;
- interrupt-parent = <&mpc5200_pic>;
+ interrupts = <2 6 0>;
};
dma-controller@1200 {
- device_type = "dma-controller";
compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
reg = <0x1200 0x80>;
- interrupts = <0x3 0x0 0x0 0x3 0x1 0x0 0x3 0x2 0x0 0x3 0x3 0x0
- 0x3 0x4 0x0 0x3 0x5 0x0 0x3 0x6 0x0 0x3 0x7 0x0
- 0x3 0x8 0x0 0x3 0x9 0x0 0x3 0xa 0x0 0x3 0xb 0x0
- 0x3 0xc 0x0 0x3 0xd 0x0 0x3 0xe 0x0 0x3 0xf 0x0>;
- interrupt-parent = <&mpc5200_pic>;
+ interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
+ 3 4 0 3 5 0 3 6 0 3 7 0
+ 3 8 0 3 9 0 3 10 0 3 11 0
+ 3 12 0 3 13 0 3 14 0 3 15 0>;
};
xlb@1f00 {
@@ -213,24 +186,19 @@
};
ac97@2000 { /* PSC1 in ac97 mode */
- device_type = "sound";
compatible = "mpc5200b-psc-ac97","fsl,mpc5200b-psc-ac97";
cell-index = <0>;
reg = <0x2000 0x100>;
- interrupts = <0x2 0x2 0x0>;
- interrupt-parent = <&mpc5200_pic>;
+ interrupts = <2 1 0>;
};
/* PSC2 port is used by CAN1/2 */
serial@2400 { /* PSC3 in UART mode */
- device_type = "serial";
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
- port-number = <0>;
cell-index = <2>;
reg = <0x2400 0x100>;
- interrupts = <0x2 0x3 0x0>;
- interrupt-parent = <&mpc5200_pic>;
+ interrupts = <2 3 0>;
};
/* PSC4 is ??? */
@@ -238,55 +206,44 @@
/* PSC5 is ??? */
serial@2c00 { /* PSC6 in UART mode */
- device_type = "serial";
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
- port-number = <1>;
cell-index = <5>;
reg = <0x2c00 0x100>;
- interrupts = <0x2 0x4 0x0>;
- interrupt-parent = <&mpc5200_pic>;
+ interrupts = <2 4 0>;
};
ethernet@3000 {
- device_type = "network";
compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
reg = <0x3000 0x400>;
- local-mac-address = [00 00 00 00 00 00];
- interrupts = <0x2 0x5 0x0>;
- interrupt-parent = <&mpc5200_pic>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <2 5 0>;
phy-handle = <&phy0>;
};
mdio@3000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,mpc5200b-mdio", "fsl,mpc5200-mdio";
- reg = <0x3000 0x400>; /* fec range, since we need to setup fec interrupts */
- interrupts = <0x2 0x5 0x0>; /* these are for "mii command finished", not link changes & co. */
- interrupt-parent = <&mpc5200_pic>;
-
- phy0:ethernet-phy@0 {
- device_type = "ethernet-phy";
- reg = <0x0>;
+ compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
+ reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
+ interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
};
};
ata@3a00 {
- device_type = "ata";
compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
reg = <0x3a00 0x100>;
- interrupts = <0x2 0x7 0x0>;
- interrupt-parent = <&mpc5200_pic>;
+ interrupts = <2 7 0>;
};
i2c@3d00 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
- cell-index = <0>;
reg = <0x3d00 0x40>;
- interrupts = <0x2 0xf 0x0>;
- interrupt-parent = <&mpc5200_pic>;
+ interrupts = <2 15 0>;
fsl5200-clocking;
};
@@ -294,10 +251,8 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
- cell-index = <1>;
reg = <0x3d40 0x40>;
- interrupts = <0x2 0x10 0x0>;
- interrupt-parent = <&mpc5200_pic>;
+ interrupts = <2 16 0>;
fsl5200-clocking;
rtc@51 {
compatible = "nxp,pcf8563";
@@ -307,7 +262,7 @@
};
sram@8000 {
- compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram","sram";
+ compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
reg = <0x8000 0x4000>;
};
@@ -340,22 +295,21 @@
device_type = "pci";
compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
reg = <0xf0000d00 0x100>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <0xc000 0x0 0x0 0x1 &mpc5200_pic 0x0 0x0 0x3 /* 1st slot */
- 0xc000 0x0 0x0 0x2 &mpc5200_pic 0x1 0x1 0x3
- 0xc000 0x0 0x0 0x3 &mpc5200_pic 0x1 0x2 0x3
- 0xc000 0x0 0x0 0x4 &mpc5200_pic 0x1 0x3 0x3
-
- 0xc800 0x0 0x0 0x1 &mpc5200_pic 0x1 0x1 0x3 /* 2nd slot */
- 0xc800 0x0 0x0 0x2 &mpc5200_pic 0x1 0x2 0x3
- 0xc800 0x0 0x0 0x3 &mpc5200_pic 0x1 0x3 0x3
- 0xc800 0x0 0x0 0x4 &mpc5200_pic 0x0 0x0 0x3>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
+ 0xc000 0 0 2 &mpc5200_pic 1 1 3
+ 0xc000 0 0 3 &mpc5200_pic 1 2 3
+ 0xc000 0 0 4 &mpc5200_pic 1 3 3
+
+ 0xc800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot
+ 0xc800 0 0 2 &mpc5200_pic 1 2 3
+ 0xc800 0 0 3 &mpc5200_pic 1 3 3
+ 0xc800 0 0 4 &mpc5200_pic 0 0 3>;
clock-frequency = <0>; // From boot loader
- interrupts = <0x2 0x8 0x0 0x2 0x9 0x0 0x2 0xa 0x0>;
- interrupt-parent = <&mpc5200_pic>;
+ interrupts = <2 8 0 2 9 0 2 10 0>;
bus-range = <0 0>;
- ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x20000000
- 0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
- 0x01000000 0x0 0x00000000 0xb0000000 0x0 0x01000000>;
+ ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
+ 0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
};
};
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-15 18:05:58 +0000