summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/boot/dts/xpedite5200_xmon.dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/boot/dts/xpedite5200_xmon.dts')
-rw-r--r--arch/powerpc/boot/dts/xpedite5200_xmon.dts506
1 files changed, 506 insertions, 0 deletions
diff --git a/arch/powerpc/boot/dts/xpedite5200_xmon.dts b/arch/powerpc/boot/dts/xpedite5200_xmon.dts
new file mode 100644
index 00000000000..c5b29752651
--- /dev/null
+++ b/arch/powerpc/boot/dts/xpedite5200_xmon.dts
@@ -0,0 +1,506 @@
+/*
+ * Copyright (C) 2009 Extreme Engineering Solutions, Inc.
+ * Based on TQM8548 device tree
+ *
+ * XPedite5200 PrPMC/XMC module based on MPC8548E. This dts is for the
+ * xMon boot loader memory map which differs from U-Boot's.
+ *
+ * This is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+/ {
+ model = "xes,xpedite5200";
+ compatible = "xes,xpedite5200", "xes,MPC8548";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ form-factor = "PMC/XMC";
+ boot-bank = <0x0>;
+
+ aliases {
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ ethernet3 = &enet3;
+
+ serial0 = &serial0;
+ serial1 = &serial1;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8548@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <32>; // 32 bytes
+ i-cache-line-size = <32>; // 32 bytes
+ d-cache-size = <0x8000>; // L1, 32K
+ i-cache-size = <0x8000>; // L1, 32K
+ next-level-cache = <&L2>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x0>; // Filled in by boot loader
+ };
+
+ soc@ef000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ ranges = <0x0 0xef000000 0x100000>;
+ bus-frequency = <0>;
+ compatible = "fsl,mpc8548-immr", "simple-bus";
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <12>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,mpc8548-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,mpc8548-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <18 2>;
+ };
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,mpc8548-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x80000>; // L2, 512K
+ interrupt-parent = <&mpic>;
+ interrupts = <16 2>;
+ };
+
+ /* On-card I2C */
+ i2c@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <43 2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+
+ /*
+ * Board GPIO:
+ * 0: BRD_CFG0 (1: P14 IO present)
+ * 1: BRD_CFG1 (1: FP ethernet present)
+ * 2: BRD_CFG2 (1: XMC IO present)
+ * 3: XMC root complex indicator
+ * 4: Flash boot device indicator
+ * 5: Flash write protect enable
+ * 6: PMC monarch indicator
+ * 7: PMC EREADY
+ */
+ gpio1: gpio@18 {
+ compatible = "nxp,pca9556";
+ reg = <0x18>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ polarity = <0x00>;
+ };
+
+ /* P14 GPIO */
+ gpio2: gpio@19 {
+ compatible = "nxp,pca9556";
+ reg = <0x19>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ polarity = <0x00>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,at24c16";
+ reg = <0x50>;
+ };
+
+ rtc@68 {
+ compatible = "stm,m41t00",
+ "dallas,ds1338";
+ reg = <0x68>;
+ };
+
+ dtt@48 {
+ compatible = "maxim,max1237";
+ reg = <0x34>;
+ };
+ };
+
+ /* Off-card I2C */
+ i2c@3100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ compatible = "fsl-i2c";
+ reg = <0x3100 0x100>;
+ interrupts = <43 2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+ };
+
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8548-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8548-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8548-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8548-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
+ /* eTSEC1: Front panel port 0 */
+ enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <0>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <29 2 30 2 34 2>;
+ interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi0>;
+ phy-handle = <&phy0>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy0: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <8 1>;
+ reg = <0x1>;
+ };
+ phy1: ethernet-phy@2 {
+ interrupt-parent = <&mpic>;
+ interrupts = <8 1>;
+ reg = <0x2>;
+ };
+ phy2: ethernet-phy@3 {
+ interrupt-parent = <&mpic>;
+ interrupts = <8 1>;
+ reg = <0x3>;
+ };
+ phy3: ethernet-phy@4 {
+ interrupt-parent = <&mpic>;
+ interrupts = <8 1>;
+ reg = <0x4>;
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+ };
+
+ /* eTSEC2: Front panel port 1 */
+ enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <1>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <35 2 36 2 40 2>;
+ interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi1>;
+ phy-handle = <&phy1>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+ };
+
+ /* eTSEC3: Rear panel port 2 */
+ enet2: ethernet@26000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <2>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x26000 0x1000>;
+ ranges = <0x0 0x26000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <31 2 32 2 33 2>;
+ interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi2>;
+ phy-handle = <&phy2>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+ };
+
+ /* eTSEC4: Rear panel port 3 */
+ enet3: ethernet@27000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <3>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x27000 0x1000>;
+ ranges = <0x0 0x27000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <37 2 38 2 39 2>;
+ interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi3>;
+ phy-handle = <&phy3>;
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi3: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+ };
+
+ serial0: serial@4500 {
+ cell-index = <0>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4500 0x100>;
+ clock-frequency = <0>;
+ current-speed = <9600>;
+ interrupts = <42 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ serial1: serial@4600 {
+ cell-index = <1>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4600 0x100>;
+ clock-frequency = <0>;
+ current-speed = <9600>;
+ interrupts = <42 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ global-utilities@e0000 { // global utilities reg
+ compatible = "fsl,mpc8548-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+
+ mpic: pic@40000 {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <0x40000 0x40000>;
+ compatible = "chrp,open-pic";
+ device_type = "open-pic";
+ };
+ };
+
+ localbus@ef005000 {
+ compatible = "fsl,mpc8548-localbus", "fsl,pq3-localbus",
+ "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ reg = <0xef005000 0x100>; // BRx, ORx, etc.
+
+ ranges = <
+ 0 0x0 0xf8000000 0x08000000 // NOR boot flash
+ 1 0x0 0xf0000000 0x08000000 // NOR expansion flash
+ 2 0x0 0xe8000000 0x00010000 // NAND CE1
+ 3 0x0 0xe8010000 0x00010000 // NAND CE2
+ >;
+
+ nor-boot@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0 0x0 0x4000000>;
+ bank-width = <2>;
+
+ partition@0 {
+ label = "Primary OS";
+ reg = <0x00000000 0x180000>;
+ };
+ partition@180000 {
+ label = "Secondary OS";
+ reg = <0x00180000 0x180000>;
+ };
+ partition@300000 {
+ label = "User";
+ reg = <0x00300000 0x3c80000>;
+ };
+ partition@3f80000 {
+ label = "Boot firmware";
+ reg = <0x03f80000 0x80000>;
+ };
+ };
+
+ nor-alternate@1,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <1 0x0 0x4000000>;
+ bank-width = <2>;
+
+ partition@0 {
+ label = "Filesystem";
+ reg = <0x00000000 0x3f80000>;
+ };
+ partition@3f80000 {
+ label = "Alternate boot firmware";
+ reg = <0x03f80000 0x80000>;
+ };
+ };
+
+ nand@2,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "xes,address-ctl-nand";
+ reg = <2 0x0 0x10000>;
+ cle-line = <0x8>; /* CLE tied to A3 */
+ ale-line = <0x10>; /* ALE tied to A4 */
+
+ partition@0 {
+ label = "NAND Filesystem";
+ reg = <0 0x40000000>;
+ };
+ };
+ };
+
+ /* PMC interface */
+ pci0: pci@ef008000 {
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
+ device_type = "pci";
+ reg = <0xef008000 0x1000>;
+ clock-frequency = <33333333>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+ /* IDSEL */
+ 0xe000 0 0 1 &mpic 2 1
+ 0xe000 0 0 2 &mpic 3 1>;
+
+ interrupt-parent = <&mpic>;
+ interrupts = <24 2>;
+ bus-range = <0 0>;
+ ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000
+ 0x01000000 0 0x00000000 0xd0000000 0 0x01000000>;
+ };
+
+ /* XMC PCIe */
+ pci1: pcie@ef00a000 {
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0x00000 0 0 1 &mpic 0 1
+ 0x00000 0 0 2 &mpic 1 1
+ 0x00000 0 0 3 &mpic 2 1
+ 0x00000 0 0 4 &mpic 3 1>;
+
+ interrupt-parent = <&mpic>;
+ interrupts = <26 2>;
+ bus-range = <0 0xff>;
+ ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x20000000
+ 0x01000000 0 0x00000000 0xd1000000 0 0x01000000>;
+ clock-frequency = <33333333>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0xef00a000 0x1000>;
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ ranges = <0x02000000 0 0xc0000000 0x02000000 0
+ 0xc0000000 0 0x20000000
+ 0x01000000 0 0x00000000 0x01000000 0
+ 0x00000000 0 0x08000000>;
+ };
+ };
+
+ /* Needed for dtbImage boot wrapper compatibility */
+ chosen {
+ linux,stdout-path = &serial0;
+ };
+};
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-21 16:08:08 +0000