diff options
Diffstat (limited to 'arch/powerpc/boot/dts')
52 files changed, 3698 insertions, 623 deletions
diff --git a/arch/powerpc/boot/dts/a4m072.dts b/arch/powerpc/boot/dts/a4m072.dts new file mode 100644 index 00000000000..fabe7b7d5f1 --- /dev/null +++ b/arch/powerpc/boot/dts/a4m072.dts @@ -0,0 +1,168 @@ +/* + * a4m072 board Device Tree Source + * + * Copyright (C) 2011 DENX Software Engineering GmbH + * Heiko Schocher <hs@denx.de> + * + * Copyright (C) 2007 Semihalf + * Marian Balakowicz <m8@semihalf.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "mpc5200b.dtsi" + +/ { + model = "anonymous,a4m072"; + compatible = "anonymous,a4m072"; + + soc5200@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc5200b-immr"; + ranges = <0 0xf0000000 0x0000c000>; + reg = <0xf0000000 0x00000100>; + bus-frequency = <0>; /* From boot loader */ + system-frequency = <0>; /* From boot loader */ + + cdm@200 { + fsl,init-ext-48mhz-en = <0x0>; + fsl,init-fd-enable = <0x01>; + fsl,init-fd-counters = <0x3333>; + }; + + timer@600 { + fsl,has-wdt; + }; + + gpt3: timer@630 { /* General Purpose Timer in GPIO mode */ + compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + + gpt4: timer@640 { /* General Purpose Timer in GPIO mode */ + compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + + gpt5: timer@650 { /* General Purpose Timer in GPIO mode */ + compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + + spi@f00 { + status = "disabled"; + }; + + psc@2000 { + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + reg = <0x2000 0x100>; + interrupts = <2 1 0>; + }; + + psc@2200 { + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + reg = <0x2200 0x100>; + interrupts = <2 2 0>; + }; + + psc@2400 { + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + reg = <0x2400 0x100>; + interrupts = <2 3 0>; + }; + + psc@2600 { + status = "disabled"; + }; + + psc@2800 { + status = "disabled"; + }; + + psc@2c00 { + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + reg = <0x2c00 0x100>; + interrupts = <2 4 0>; + }; + + ethernet@3000 { + phy-handle = <&phy0>; + }; + + mdio@3000 { + phy0: ethernet-phy@1f { + reg = <0x1f>; + interrupts = <1 2 0>; /* IRQ 2 active low */ + }; + }; + + i2c@3d00 { + status = "disabled"; + }; + + i2c@3d40 { + hwmon@2e { + compatible = "nsc,lm87"; + reg = <0x2e>; + }; + rtc@51 { + compatible = "nxp,rtc8564"; + reg = <0x51>; + }; + }; + }; + + localbus { + compatible = "fsl,mpc5200b-lpb","simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0xfe000000 0x02000000 + 1 0 0x62000000 0x00400000 + 2 0 0x64000000 0x00200000 + 3 0 0x66000000 0x01000000 + 6 0 0x68000000 0x01000000 + 7 0 0x6a000000 0x00000004>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x02000000>; + bank-width = <2>; + #size-cells = <1>; + #address-cells = <1>; + }; + sram0@1,0 { + compatible = "mtd-ram"; + reg = <1 0x00000 0x00400000>; + bank-width = <2>; + }; + }; + + pci@f0000d00 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + compatible = "fsl,mpc5200-pci"; + reg = <0xf0000d00 0x100>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x16 */ + 0xc000 0 0 1 &mpc5200_pic 1 3 3 + 0xc000 0 0 2 &mpc5200_pic 1 3 3 + 0xc000 0 0 3 &mpc5200_pic 1 3 3 + 0xc000 0 0 4 &mpc5200_pic 1 3 3>; + clock-frequency = <0>; /* From boot loader */ + interrupts = <2 8 0 2 9 0 2 10 0>; + bus-range = <0 0>; + ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000 + 0x02000000 0 0x90000000 0x90000000 0 0x10000000 + 0x01000000 0 0x00000000 0xa0000000 0 0x01000000>; + }; +}; diff --git a/arch/powerpc/boot/dts/bluestone.dts b/arch/powerpc/boot/dts/bluestone.dts index 74876f73740..7bda373f10e 100644 --- a/arch/powerpc/boot/dts/bluestone.dts +++ b/arch/powerpc/boot/dts/bluestone.dts @@ -33,7 +33,7 @@ aliases { ethernet0 = &EMAC0; serial0 = &UART0; - //serial1 = &UART1; --gcl missing UART1 label + serial1 = &UART1; }; cpus { @@ -52,7 +52,7 @@ d-cache-size = <32768>; dcr-controller; dcr-access-method = "native"; - //next-level-cache = <&L2C0>; --gcl missing L2C0 label + next-level-cache = <&L2C0>; }; }; @@ -117,6 +117,16 @@ dcr-reg = <0x00c 0x002>; }; + L2C0: l2c { + compatible = "ibm,l2-cache-apm82181", "ibm,l2-cache"; + dcr-reg = <0x020 0x008 + 0x030 0x008>; + cache-line-size = <32>; + cache-size = <262144>; + interrupt-parent = <&UIC1>; + interrupts = <11 1>; + }; + plb { compatible = "ibm,plb4"; #address-cells = <2>; @@ -182,6 +192,53 @@ reg = <0x001a0000 0x00060000>; }; }; + + ndfc@1,0 { + compatible = "ibm,ndfc"; + reg = <0x00000003 0x00000000 0x00002000>; + ccr = <0x00001000>; + bank-settings = <0x80002222>; + #address-cells = <1>; + #size-cells = <1>; + /* 2Gb Nand Flash */ + nand { + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "firmware"; + reg = <0x00000000 0x00C00000>; + }; + partition@c00000 { + label = "environment"; + reg = <0x00C00000 0x00B00000>; + }; + partition@1700000 { + label = "kernel"; + reg = <0x01700000 0x00E00000>; + }; + partition@2500000 { + label = "root"; + reg = <0x02500000 0x08200000>; + }; + partition@a700000 { + label = "device-tree"; + reg = <0x0A700000 0x00B00000>; + }; + partition@b200000 { + label = "config"; + reg = <0x0B200000 0x00D00000>; + }; + partition@bf00000 { + label = "diag"; + reg = <0x0BF00000 0x00C00000>; + }; + partition@cb00000 { + label = "vendor"; + reg = <0x0CB00000 0x3500000>; + }; + }; + }; }; UART0: serial@ef600300 { @@ -195,11 +252,36 @@ interrupts = <0x1 0x4>; }; + UART1: serial@ef600400 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600400 0x00000008>; + virtual-reg = <0xef600400>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC0>; + interrupts = <0x1 0x4>; + }; + IIC0: i2c@ef600700 { compatible = "ibm,iic"; reg = <0xef600700 0x00000014>; interrupt-parent = <&UIC0>; interrupts = <0x2 0x4>; + #address-cells = <1>; + #size-cells = <0>; + rtc@68 { + compatible = "stm,m41t80"; + reg = <0x68>; + interrupt-parent = <&UIC0>; + interrupts = <0x9 0x8>; + }; + sttm@4C { + compatible = "adm,adm1032"; + reg = <0x4C>; + interrupt-parent = <&UIC1>; + interrupts = <0x1E 0x8>; /* CPU_THERNAL_L */ + }; }; IIC1: i2c@ef600800 { @@ -250,5 +332,46 @@ }; }; + PCIE0: pciex@d00000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-apm821xx", "ibm,plb-pciex"; + primary; + port = <0x0>; /* port number */ + reg = <0x0000000d 0x00000000 0x20000000 /* Config space access */ + 0x0000000c 0x08010000 0x00001000>; /* Registers */ + dcr-reg = <0x100 0x020>; + sdr-base = <0x300>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000 + 0x02000000 0x00000000 0x00000000 0x0000000f 0x00000000 0x00000000 0x00100000 + 0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; + + /* This drives busses 40 to 0x7f */ + bus-range = <0x40 0x7f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &UIC3 0xc 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC3 0xd 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC3 0xe 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC3 0xf 0x4 /* swizzled int D */>; + }; }; }; diff --git a/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi index b37da56018b..c8b2daa40ac 100644 --- a/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi @@ -202,7 +202,7 @@ /include/ "pq3-etsec1-timer-0.dtsi" usb@22000 { - compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph"; + compatible = "fsl-usb2-mph-v1.2", "fsl,mpc8536-usb2-mph", "fsl-usb2-mph"; reg = <0x22000 0x1000>; #address-cells = <1>; #size-cells = <0>; @@ -210,7 +210,7 @@ }; usb@23000 { - compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph"; + compatible = "fsl-usb2-mph-v1.2", "fsl,mpc8536-usb2-mph", "fsl-usb2-mph"; reg = <0x23000 0x1000>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi index 9d8023a69d7..579d76cb8e3 100644 --- a/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi @@ -89,6 +89,21 @@ }; }; +&rio { + compatible = "fsl,srio"; + interrupts = <48 2 0 0>; + #address-cells = <2>; + #size-cells = <2>; + fsl,srio-rmu-handle = <&rmu>; + ranges; + + port1 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <1>; + }; +}; + &soc { #address-cells = <1>; #size-cells = <1>; @@ -134,6 +149,7 @@ /include/ "pq3-sec2.1-0.dtsi" /include/ "pq3-mpic.dtsi" +/include/ "pq3-rmu-0.dtsi" global-utilities@e0000 { compatible = "fsl,mpc8548-guts"; diff --git a/arch/powerpc/boot/dts/fsl/mpc8548si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8548si-pre.dtsi index 289f1218d75..720422d8352 100644 --- a/arch/powerpc/boot/dts/fsl/mpc8548si-pre.dtsi +++ b/arch/powerpc/boot/dts/fsl/mpc8548si-pre.dtsi @@ -43,7 +43,9 @@ serial0 = &serial0; serial1 = &serial1; ethernet0 = &enet0; - ethernet1 = &enet2; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; pci0 = &pci0; pci1 = &pci1; pci2 = &pci2; diff --git a/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi index a97d1263372..0bde9ee8afa 100644 --- a/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi @@ -156,6 +156,9 @@ /include/ "pq3-dma-0.dtsi" /include/ "pq3-usb2-dr-0.dtsi" + usb@22000 { + compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr"; + }; /include/ "pq3-esdhc-0.dtsi" sdhc@2e000 { compatible = "fsl,p1010-esdhc", "fsl,esdhc"; diff --git a/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi index 5de5fc35131..68cc5e7f647 100644 --- a/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi @@ -142,7 +142,13 @@ /include/ "pq3-dma-0.dtsi" /include/ "pq3-usb2-dr-0.dtsi" + usb@22000 { + compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr"; + }; /include/ "pq3-usb2-dr-1.dtsi" + usb@23000 { + compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr"; + }; /include/ "pq3-esdhc-0.dtsi" sdhc@2e000 { diff --git a/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi index 38ba54d1e32..4252ef85fb7 100644 --- a/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi @@ -142,8 +142,15 @@ /include/ "pq3-dma-0.dtsi" /include/ "pq3-usb2-dr-0.dtsi" + usb@22000 { + compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr"; + }; /include/ "pq3-esdhc-0.dtsi" + sdhc@2e000 { + sdhci,auto-cmd12; + }; + /include/ "pq3-sec3.3-0.dtsi" /include/ "pq3-mpic.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi index ff9ed1d8792..06216b8c0af 100644 --- a/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi @@ -35,7 +35,11 @@ &lbc { #address-cells = <2>; #size-cells = <1>; - compatible = "fsl,p1022-elbc", "fsl,elbc", "simple-bus"; + /* + * The localbus on the P1022 is not a simple-bus because of the eLBC + * pin muxing when the DIU is enabled. + */ + compatible = "fsl,p1022-elbc", "fsl,elbc"; interrupts = <19 2 0 0>; }; @@ -199,7 +203,13 @@ /include/ "pq3-dma-0.dtsi" /include/ "pq3-usb2-dr-0.dtsi" + usb@22000 { + compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr"; + }; /include/ "pq3-usb2-dr-1.dtsi" + usb@23000 { + compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr"; + }; /include/ "pq3-esdhc-0.dtsi" sdhc@2e000 { diff --git a/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi index b06bb4cc1fe..941fa159cef 100644 --- a/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi @@ -142,6 +142,9 @@ /include/ "pq3-dma-0.dtsi" /include/ "pq3-usb2-dr-0.dtsi" + usb@22000 { + compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr"; + }; crypto: crypto@300000 { compatible = "fsl,sec-v4.2", "fsl,sec-v4.0"; diff --git a/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi index 332e9e75e6c..884e01bcb24 100644 --- a/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi @@ -171,6 +171,9 @@ /include/ "pq3-dma-0.dtsi" /include/ "pq3-usb2-dr-0.dtsi" + usb@22000 { + compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr"; + }; /include/ "pq3-etsec1-0.dtsi" /include/ "pq3-etsec1-timer-0.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi index 234a399ddeb..531eab82c6c 100644 --- a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi @@ -309,12 +309,14 @@ /include/ "qoriq-gpio-0.dtsi" /include/ "qoriq-usb2-mph-0.dtsi" usb0: usb@210000 { + compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; phy_type = "utmi"; port0; }; /include/ "qoriq-usb2-dr-0.dtsi" usb1: usb@211000 { + compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; dr_mode = "host"; phy_type = "utmi"; }; diff --git a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi index d41d08de7f7..af4ebc8009e 100644 --- a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi @@ -336,12 +336,14 @@ /include/ "qoriq-gpio-0.dtsi" /include/ "qoriq-usb2-mph-0.dtsi" usb0: usb@210000 { + compatible = "fsl-usb2-mph-v1.6", "fsl-usb2-mph"; phy_type = "utmi"; port0; }; /include/ "qoriq-usb2-dr-0.dtsi" usb1: usb@211000 { + compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; dr_mode = "host"; phy_type = "utmi"; }; diff --git a/arch/powerpc/boot/dts/fsl/p3060si-post.dtsi b/arch/powerpc/boot/dts/fsl/p3060si-post.dtsi index a63edd195ae..b3e56929eee 100644 --- a/arch/powerpc/boot/dts/fsl/p3060si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p3060si-post.dtsi @@ -291,6 +291,12 @@ /include/ "qoriq-duart-1.dtsi" /include/ "qoriq-gpio-0.dtsi" /include/ "qoriq-usb2-mph-0.dtsi" + usb@210000 { + compatible = "fsl-usb2-mph-v2.2", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; + }; /include/ "qoriq-usb2-dr-0.dtsi" + usb@211000 { + compatible = "fsl-usb2-dr-v2.2", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; + }; /include/ "qoriq-sec4.1-0.dtsi" }; diff --git a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi index 914074b91a8..64b6abea846 100644 --- a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi @@ -339,12 +339,14 @@ /include/ "qoriq-gpio-0.dtsi" /include/ "qoriq-usb2-mph-0.dtsi" usb0: usb@210000 { + compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; phy_type = "utmi"; port0; }; /include/ "qoriq-usb2-dr-0.dtsi" usb1: usb@211000 { + compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; dr_mode = "host"; phy_type = "utmi"; }; diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec1-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec1-0.dtsi index a1979ae334a..3b0650a9847 100644 --- a/arch/powerpc/boot/dts/fsl/pq3-etsec1-0.dtsi +++ b/arch/powerpc/boot/dts/fsl/pq3-etsec1-0.dtsi @@ -1,7 +1,7 @@ /* * PQ3 eTSEC device tree stub [ @ offsets 0x24000 ] * - * Copyright 2011 Freescale Semiconductor Inc. + * Copyright 2011-2012 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -41,6 +41,7 @@ ethernet@24000 { compatible = "gianfar"; reg = <0x24000 0x1000>; ranges = <0x0 0x24000 0x1000>; + fsl,magic-packet; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>; }; diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec1-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec1-1.dtsi index 4c4fdde1ec2..96693b41f0f 100644 --- a/arch/powerpc/boot/dts/fsl/pq3-etsec1-1.dtsi +++ b/arch/powerpc/boot/dts/fsl/pq3-etsec1-1.dtsi @@ -1,7 +1,7 @@ /* * PQ3 eTSEC device tree stub [ @ offsets 0x25000 ] * - * Copyright 2011 Freescale Semiconductor Inc. + * Copyright 2011-2012 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -41,6 +41,7 @@ ethernet@25000 { compatible = "gianfar"; reg = <0x25000 0x1000>; ranges = <0x0 0x25000 0x1000>; + fsl,magic-packet; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>; }; diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec1-2.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec1-2.dtsi index 4b8ab438668..6b3fab19da1 100644 --- a/arch/powerpc/boot/dts/fsl/pq3-etsec1-2.dtsi +++ b/arch/powerpc/boot/dts/fsl/pq3-etsec1-2.dtsi @@ -1,7 +1,7 @@ /* * PQ3 eTSEC device tree stub [ @ offsets 0x26000 ] * - * Copyright 2011 Freescale Semiconductor Inc. + * Copyright 2011-2012 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -41,6 +41,7 @@ ethernet@26000 { compatible = "gianfar"; reg = <0x26000 0x1000>; ranges = <0x0 0x26000 0x1000>; + fsl,magic-packet; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>; }; diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec1-3.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec1-3.dtsi index 40c9137729a..0da592d93dd 100644 --- a/arch/powerpc/boot/dts/fsl/pq3-etsec1-3.dtsi +++ b/arch/powerpc/boot/dts/fsl/pq3-etsec1-3.dtsi @@ -1,7 +1,7 @@ /* * PQ3 eTSEC device tree stub [ @ offsets 0x27000 ] * - * Copyright 2011 Freescale Semiconductor Inc. + * Copyright 2011-2012 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -41,6 +41,7 @@ ethernet@27000 { compatible = "gianfar"; reg = <0x27000 0x1000>; ranges = <0x0 0x27000 0x1000>; + fsl,magic-packet; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <37 2 0 0 38 2 0 0 39 2 0 0>; }; diff --git a/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi b/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi index 5c804606584..fdedf7b1fe0 100644 --- a/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi +++ b/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi @@ -39,6 +39,9 @@ mpic: pic@40000 { reg = <0x40000 0x40000>; compatible = "fsl,mpic"; device_type = "open-pic"; + big-endian; + single-cpu-affinity; + last-interrupt-source = <255>; }; timer@41100 { diff --git a/arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi index bf957a7fca2..d4c9d5daab2 100644 --- a/arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi +++ b/arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi @@ -33,32 +33,32 @@ */ crypto@30000 { - compatible = "fsl,sec4.4", "fsl,sec4.0"; + compatible = "fsl,sec-v4.4", "fsl,sec-v4.0"; #address-cells = <1>; #size-cells = <1>; reg = <0x30000 0x10000>; interrupts = <58 2 0 0>; sec_jr0: jr@1000 { - compatible = "fsl,sec4.4-job-ring", "fsl,sec4.0-job-ring"; + compatible = "fsl,sec-v4.4-job-ring", "fsl,sec-v4.0-job-ring"; reg = <0x1000 0x1000>; interrupts = <45 2 0 0>; }; sec_jr1: jr@2000 { - compatible = "fsl,sec4.4-job-ring", "fsl,sec4.0-job-ring"; + compatible = "fsl,sec-v4.4-job-ring", "fsl,sec-v4.0-job-ring"; reg = <0x2000 0x1000>; interrupts = <45 2 0 0>; }; sec_jr2: jr@3000 { - compatible = "fsl,sec4.4-job-ring", "fsl,sec4.0-job-ring"; + compatible = "fsl,sec-v4.4-job-ring", "fsl,sec-v4.0-job-ring"; reg = <0x3000 0x1000>; interrupts = <45 2 0 0>; }; sec_jr3: jr@4000 { - compatible = "fsl,sec4.4-job-ring", "fsl,sec4.0-job-ring"; + compatible = "fsl,sec-v4.4-job-ring", "fsl,sec-v4.0-job-ring"; reg = <0x4000 0x1000>; interrupts = <45 2 0 0>; }; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-mpic.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-mpic.dtsi index b9bada6a87d..08f42271f86 100644 --- a/arch/powerpc/boot/dts/fsl/qoriq-mpic.dtsi +++ b/arch/powerpc/boot/dts/fsl/qoriq-mpic.dtsi @@ -53,7 +53,7 @@ timer@41100 { msi0: msi@41600 { compatible = "fsl,mpic-msi"; - reg = <0x41600 0x200>; + reg = <0x41600 0x200 0x44140 4>; msi-available-ranges = <0 0x100>; interrupts = < 0xe0 0 0 0 @@ -68,7 +68,7 @@ msi0: msi@41600 { msi1: msi@41800 { compatible = "fsl,mpic-msi"; - reg = <0x41800 0x200>; + reg = <0x41800 0x200 0x45140 4>; msi-available-ranges = <0 0x100>; interrupts = < 0xe8 0 0 0 @@ -83,7 +83,7 @@ msi1: msi@41800 { msi2: msi@41a00 { compatible = "fsl,mpic-msi"; - reg = <0x41a00 0x200>; + reg = <0x41a00 0x200 0x46140 4>; msi-available-ranges = <0 0x100>; interrupts = < 0xf0 0 0 0 diff --git a/arch/powerpc/boot/dts/ge_imp3a.dts b/arch/powerpc/boot/dts/ge_imp3a.dts new file mode 100644 index 00000000000..fefae416a09 --- /dev/null +++ b/arch/powerpc/boot/dts/ge_imp3a.dts @@ -0,0 +1,255 @@ +/* + * GE IMP3A Device Tree Source + * + * Copyright 2010-2011 GE Intelligent Platforms Embedded Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Based on: P2020 DS Device Tree Source + * Copyright 2009 Freescale Semiconductor Inc. + */ + +/include/ "fsl/p2020si-pre.dtsi" + +/ { + model = "GE_IMP3A"; + compatible = "ge,imp3a"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@fef05000 { + reg = <0 0xfef05000 0 0x1000>; + + ranges = <0x0 0x0 0x0 0xff000000 0x01000000 + 0x1 0x0 0x0 0xe0000000 0x08000000 + 0x2 0x0 0x0 0xe8000000 0x08000000 + 0x3 0x0 0x0 0xfc100000 0x00020000 + 0x4 0x0 0x0 0xfc000000 0x00008000 + 0x5 0x0 0x0 0xfc008000 0x00008000 + 0x6 0x0 0x0 0xfee00000 0x00040000 + 0x7 0x0 0x0 0xfee80000 0x00040000>; + + /* nor@0,0 is a mirror of part of the memory in nor@1,0 + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "ge,imp3a-firmware-mirror", "cfi-flash"; + reg = <0x0 0x0 0x1000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + label = "firmware"; + reg = <0x0 0x1000000>; + read-only; + }; + }; + */ + + nor@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "ge,imp3a-paged-flash", "cfi-flash"; + reg = <0x1 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + label = "user"; + reg = <0x0 0x7800000>; + }; + + partition@7800000 { + label = "firmware"; + reg = <0x7800000 0x800000>; + read-only; + }; + }; + + nvram@3,0 { + device_type = "nvram"; + compatible = "simtek,stk14ca8"; + reg = <0x3 0x0 0x20000>; + }; + + fpga@4,0 { + compatible = "ge,imp3a-fpga-regs"; + reg = <0x4 0x0 0x20>; + }; + + gef_pic: pic@4,20 { + #interrupt-cells = <1>; + interrupt-controller; + device_type = "interrupt-controller"; + compatible = "ge,imp3a-fpga-pic", "gef,fpga-pic-1.00"; + reg = <0x4 0x20 0x20>; + interrupts = <6 7 0 0>; + }; + + gef_gpio: gpio@4,400 { + #gpio-cells = <2>; + compatible = "ge,imp3a-gpio"; + reg = <0x4 0x400 0x24>; + gpio-controller; + }; + + wdt@4,800 { + compatible = "ge,imp3a-fpga-wdt", "gef,fpga-wdt-1.00", + "gef,fpga-wdt"; + reg = <0x4 0x800 0x8>; + interrupts = <10 4>; + interrupt-parent = <&gef_pic>; + }; + + /* Second watchdog available, driver currently supports one. + wdt@4,808 { + compatible = "gef,imp3a-fpga-wdt", "gef,fpga-wdt-1.00", + "gef,fpga-wdt"; + reg = <0x4 0x808 0x8>; + interrupts = <9 4>; + interrupt-parent = <&gef_pic>; + }; + */ + + nand@6,0 { + compatible = "fsl,elbc-fcm-nand"; + reg = <0x6 0x0 0x40000>; + }; + + nand@7,0 { + compatible = "fsl,elbc-fcm-nand"; + reg = <0x7 0x0 0x40000>; + }; + }; + + soc: soc@fef00000 { + ranges = <0x0 0 0xfef00000 0x100000>; + + i2c@3000 { + hwmon@48 { + compatible = "national,lm92"; + reg = <0x48>; + }; + + hwmon@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + + rtc@51 { + compatible = "epson,rx8581"; + reg = <0x51>; + }; + + eti@6b { + compatible = "dallas,ds1682"; + reg = <0x6b>; + }; + }; + + usb@22000 { + phy_type = "ulpi"; + dr_mode = "host"; + }; + + mdio@24520 { + phy0: ethernet-phy@0 { + interrupt-parent = <&gef_pic>; + interrupts = <0xc 0x4>; + reg = <0x1>; + }; + phy1: ethernet-phy@1 { + interrupt-parent = <&gef_pic>; + interrupts = <0xb 0x4>; + reg = <0x2>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@25520 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26520 { + status = "disabled"; + }; + + enet0: ethernet@24000 { + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + phy-connection-type = "gmii"; + }; + + enet1: ethernet@25000 { + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + phy-connection-type = "gmii"; + }; + + enet2: ethernet@26000 { + status = "disabled"; + }; + }; + + pci0: pcie@fef08000 { + ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xfe020000 0x0 0x10000>; + reg = <0 0xfef08000 0 0x1000>; + + pcie@0 { + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + }; + + pci1: pcie@fef09000 { + reg = <0 0xfef09000 0 0x1000>; + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xfe010000 0x0 0x10000>; + + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + + }; + + pci2: pcie@fef0a000 { + reg = <0 0xfef0a000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xfe000000 0x0 0x10000>; + + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + }; +}; + +/include/ "fsl/p2020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts index c0e450a551b..81dd513d630 100644 --- a/arch/powerpc/boot/dts/mpc836x_mds.dts +++ b/arch/powerpc/boot/dts/mpc836x_mds.dts @@ -405,6 +405,10 @@ reg = <0x1>; device_type = "ethernet-phy"; }; + tbi-phy@2 { + device_type = "tbi-phy"; + reg = <0x2>; + }; }; qeic: interrupt-controller@80 { diff --git a/arch/powerpc/boot/dts/mpc8536ds.dts b/arch/powerpc/boot/dts/mpc8536ds.dts index c15881574fd..19736222a0b 100644 --- a/arch/powerpc/boot/dts/mpc8536ds.dts +++ b/arch/powerpc/boot/dts/mpc8536ds.dts @@ -1,7 +1,7 @@ /* * MPC8536 DS Device Tree Source * - * Copyright 2008 Freescale Semiconductor, Inc. + * Copyright 2008, 2011 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -34,6 +34,10 @@ lbc: localbus@ffe05000 { reg = <0 0xffe05000 0 0x1000>; + + ranges = <0x0 0x0 0x0 0xe8000000 0x08000000 + 0x2 0x0 0x0 0xffa00000 0x00040000 + 0x3 0x0 0x0 0xffdf0000 0x00008000>; }; board_soc: soc: soc@ffe00000 { diff --git a/arch/powerpc/boot/dts/mpc8536ds.dtsi b/arch/powerpc/boot/dts/mpc8536ds.dtsi index 1462e4cf49d..cc46dbd9746 100644 --- a/arch/powerpc/boot/dts/mpc8536ds.dtsi +++ b/arch/powerpc/boot/dts/mpc8536ds.dtsi @@ -32,6 +32,99 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ +&lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + reg = <0x0 0x03000000>; + label = "ramdisk-nor"; + }; + + partition@3000000 { + reg = <0x03000000 0x00e00000>; + label = "diagnostic-nor"; + read-only; + }; + + partition@3e00000 { + reg = <0x03e00000 0x00200000>; + label = "dink-nor"; + read-only; + }; + + partition@4000000 { + reg = <0x04000000 0x00400000>; + label = "kernel-nor"; + }; + + partition@4400000 { + reg = <0x04400000 0x03b00000>; + label = "fs-nor"; + }; + + partition@7f00000 { + reg = <0x07f00000 0x00080000>; + label = "dtb-nor"; + }; + + partition@7f80000 { + reg = <0x07f80000 0x00080000>; + label = "u-boot-nor"; + read-only; + }; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8536-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x2 0x0 0x40000>; + + partition@0 { + reg = <0x0 0x02000000>; + label = "u-boot-nand"; + read-only; + }; + + partition@2000000 { + reg = <0x02000000 0x10000000>; + label = "fs-nand"; + }; + + partition@12000000 { + reg = <0x12000000 0x08000000>; + label = "ramdisk-nand"; + }; + + partition@1a000000 { + reg = <0x1a000000 0x04000000>; + label = "kernel-nand"; + }; + + partition@1e000000 { + reg = <0x1e000000 0x01000000>; + label = "dtb-nand"; + }; + + partition@1f000000 { + reg = <0x1f000000 0x21000000>; + label = "empty-nand"; + }; + }; + + board-control@3,0 { + compatible = "fsl,mpc8536ds-fpga-pixis"; + reg = <0x3 0x0 0x8000>; + }; +}; + &board_soc { i2c@3100 { rtc@68 { diff --git a/arch/powerpc/boot/dts/mpc8536ds_36b.dts b/arch/powerpc/boot/dts/mpc8536ds_36b.dts index 8f4b929b1d1..f8a3b341317 100644 --- a/arch/powerpc/boot/dts/mpc8536ds_36b.dts +++ b/arch/powerpc/boot/dts/mpc8536ds_36b.dts @@ -1,7 +1,7 @@ /* * MPC8536DS Device Tree Source (36-bit address map) * - * Copyright 2008-2009 Freescale Semiconductor, Inc. + * Copyright 2008-2009, 2011 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -33,7 +33,11 @@ }; lbc: localbus@ffe05000 { - reg = <0 0xffe05000 0 0x1000>; + reg = <0xf 0xffe05000 0 0x1000>; + + ranges = <0x0 0x0 0xf 0xe8000000 0x08000000 + 0x2 0x0 0xf 0xffa00000 0x00040000 + 0x3 0x0 0xf 0xffdf0000 0x00008000>; }; board_soc: soc: soc@fffe00000 { diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts deleted file mode 100644 index 07b8dae0f46..00000000000 --- a/arch/powerpc/boot/dts/mpc8548cds.dts +++ /dev/null @@ -1,306 +0,0 @@ -/* - * MPC8548 CDS Device Tree Source - * - * Copyright 2006, 2008 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -/include/ "fsl/mpc8548si-pre.dtsi" - -/ { - model = "MPC8548CDS"; - compatible = "MPC8548CDS", "MPC85xxCDS"; - - aliases { - ethernet0 = &enet0; - ethernet1 = &enet1; - ethernet2 = &enet2; - ethernet3 = &enet3; - serial0 = &serial0; - serial1 = &serial1; - pci0 = &pci0; - pci1 = &pci1; - pci2 = &pci2; - }; - - memory { - device_type = "memory"; - reg = <0 0 0x0 0x8000000>; // 128M at 0x0 - }; - - lbc: localbus@e0005000 { - reg = <0 0xe0005000 0 0x1000>; - }; - - soc: soc8548@e0000000 { - ranges = <0 0x0 0xe0000000 0x100000>; - - i2c@3000 { - eeprom@50 { - compatible = "atmel,24c64"; - reg = <0x50>; - }; - - eeprom@56 { - compatible = "atmel,24c64"; - reg = <0x56>; - }; - - eeprom@57 { - compatible = "atmel,24c64"; - reg = <0x57>; - }; - }; - - i2c@3100 { - eeprom@50 { - compatible = "atmel,24c64"; - reg = <0x50>; - }; - }; - - enet0: ethernet@24000 { - tbi-handle = <&tbi0>; - phy-handle = <&phy0>; - }; - - mdio@24520 { - phy0: ethernet-phy@0 { - interrupts = <5 1 0 0>; - reg = <0x0>; - device_type = "ethernet-phy"; - }; - phy1: ethernet-phy@1 { - interrupts = <5 1 0 0>; - reg = <0x1>; - device_type = "ethernet-phy"; - }; - phy2: ethernet-phy@2 { - interrupts = <5 1 0 0>; - reg = <0x2>; - device_type = "ethernet-phy"; - }; - phy3: ethernet-phy@3 { - interrupts = <5 1 0 0>; - reg = <0x3>; - device_type = "ethernet-phy"; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - enet1: ethernet@25000 { - tbi-handle = <&tbi1>; - phy-handle = <&phy1>; - }; - - mdio@25520 { - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - enet2: ethernet@26000 { - tbi-handle = <&tbi2>; - phy-handle = <&phy2>; - }; - - mdio@26520 { - tbi2: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - enet3: ethernet@27000 { - tbi-handle = <&tbi3>; - phy-handle = <&phy3>; - }; - - mdio@27520 { - tbi3: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - pci0: pci@e0008000 { - reg = <0 0xe0008000 0 0x1000>; - ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x10000000 - 0x1000000 0x0 0x00000000 0 0xe2000000 0x0 0x800000>; - clock-frequency = <66666666>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x4 (PCIX Slot 2) */ - 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 - 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 - 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 - 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 - - /* IDSEL 0x5 (PCIX Slot 3) */ - 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0 - 0x2800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0 - 0x2800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0 - 0x2800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0 - - /* IDSEL 0x6 (PCIX Slot 4) */ - 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 - 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 - 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0 - 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 - - /* IDSEL 0x8 (PCIX Slot 5) */ - 0x4000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 - 0x4000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 - 0x4000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 - 0x4000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 - - /* IDSEL 0xC (Tsi310 bridge) */ - 0x6000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 - 0x6000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 - 0x6000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 - 0x6000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 - - /* IDSEL 0x14 (Slot 2) */ - 0xa000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 - 0xa000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 - 0xa000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 - 0xa000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 - - /* IDSEL 0x15 (Slot 3) */ - 0xa800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0 - 0xa800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0 - 0xa800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0 - 0xa800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0 - - /* IDSEL 0x16 (Slot 4) */ - 0xb000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 - 0xb000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 - 0xb000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0 - 0xb000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 - - /* IDSEL 0x18 (Slot 5) */ - 0xc000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 - 0xc000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 - 0xc000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 - 0xc000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 - - /* IDSEL 0x1C (Tsi310 bridge PCI primary) */ - 0xe000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 - 0xe000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 - 0xe000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 - 0xe000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>; - - pci_bridge@1c { - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - - /* IDSEL 0x00 (PrPMC Site) */ - 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 - 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 - 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 - 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 - - /* IDSEL 0x04 (VIA chip) */ - 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 - 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 - 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 - 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 - - /* IDSEL 0x05 (8139) */ - 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0 - - /* IDSEL 0x06 (Slot 6) */ - 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 - 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 - 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0 - 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 - - /* IDESL 0x07 (Slot 7) */ - 0x3800 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 - 0x3800 0x0 0x0 0x2 &mpic 0x0 0x1 0 0 - 0x3800 0x0 0x0 0x3 &mpic 0x1 0x1 0 0 - 0x3800 0x0 0x0 0x4 &mpic 0x2 0x1 0 0>; - - reg = <0xe000 0x0 0x0 0x0 0x0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - ranges = <0x2000000 0x0 0x80000000 - 0x2000000 0x0 0x80000000 - 0x0 0x20000000 - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x80000>; - clock-frequency = <33333333>; - - isa@4 { - device_type = "isa"; - #interrupt-cells = <2>; - #size-cells = <1>; - #address-cells = <2>; - reg = <0x2000 0x0 0x0 0x0 0x0>; - ranges = <0x1 0x0 0x1000000 0x0 0x0 0x1000>; - interrupt-parent = <&i8259>; - - i8259: interrupt-controller@20 { - interrupt-controller; - device_type = "interrupt-controller"; - reg = <0x1 0x20 0x2 - 0x1 0xa0 0x2 - 0x1 0x4d0 0x2>; - #address-cells = <0>; - #interrupt-cells = <2>; - compatible = "chrp,iic"; - interrupts = <0 1 0 0>; - interrupt-parent = <&mpic>; - }; - - rtc@70 { - compatible = "pnpPNP,b00"; - reg = <0x1 0x70 0x2>; - }; - }; - }; - }; - - pci1: pci@e0009000 { - reg = <0 0xe0009000 0 0x1000>; - ranges = <0x2000000 0x0 0x90000000 0 0x90000000 0x0 0x10000000 - 0x1000000 0x0 0x00000000 0 0xe2800000 0x0 0x800000>; - clock-frequency = <66666666>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - - /* IDSEL 0x15 */ - 0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 0 0 - 0xa800 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 - 0xa800 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 - 0xa800 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>; - }; - - pci2: pcie@e000a000 { - reg = <0 0xe000a000 0 0x1000>; - ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 - 0x1000000 0x0 0x00000000 0 0xe3000000 0x0 0x100000>; - pcie@0 { - ranges = <0x2000000 0x0 0xa0000000 - 0x2000000 0x0 0xa0000000 - 0x0 0x20000000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x100000>; - }; - }; -}; - -/include/ "fsl/mpc8548si-post.dtsi" diff --git a/arch/powerpc/boot/dts/mpc8548cds.dtsi b/arch/powerpc/boot/dts/mpc8548cds.dtsi new file mode 100644 index 00000000000..c61f525e474 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8548cds.dtsi @@ -0,0 +1,306 @@ +/* + * MPC8548CDS Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&board_lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x01000000>; + bank-width = <2>; + device-width = <2>; + + partition@0 { + reg = <0x0 0x0b00000>; + label = "ramdisk-nor"; + }; + + partition@300000 { + reg = <0x0b00000 0x0400000>; + label = "kernel-nor"; + }; + + partition@700000 { + reg = <0x0f00000 0x060000>; + label = "dtb-nor"; + }; + + partition@760000 { + reg = <0x0f60000 0x020000>; + label = "env-nor"; + read-only; + }; + + partition@780000 { + reg = <0x0f80000 0x080000>; + label = "u-boot-nor"; + read-only; + }; + }; + + board-control@1,0 { + compatible = "fsl,mpc8548cds-fpga"; + reg = <0x1 0x0 0x1000>; + }; +}; + +&board_soc { + i2c@3000 { + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + eeprom@56 { + compatible = "atmel,24c64"; + reg = <0x56>; + }; + + eeprom@57 { + compatible = "atmel,24c64"; + reg = <0x57>; + }; + }; + + i2c@3100 { + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + }; + + enet0: ethernet@24000 { + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + }; + + mdio@24520 { + phy0: ethernet-phy@0 { + interrupts = <5 1 0 0>; + reg = <0x0>; + device_type = "ethernet-phy"; + }; + phy1: ethernet-phy@1 { + interrupts = <5 1 0 0>; + reg = <0x1>; + device_type = "ethernet-phy"; + }; + phy2: ethernet-phy@2 { + interrupts = <5 1 0 0>; + reg = <0x2>; + device_type = "ethernet-phy"; + }; + phy3: ethernet-phy@3 { + interrupts = <5 1 0 0>; + reg = <0x3>; + device_type = "ethernet-phy"; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet1: ethernet@25000 { + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + }; + + mdio@25520 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet2: ethernet@26000 { + tbi-handle = <&tbi2>; + phy-handle = <&phy2>; + }; + + mdio@26520 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet3: ethernet@27000 { + tbi-handle = <&tbi3>; + phy-handle = <&phy3>; + }; + + mdio@27520 { + tbi3: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; +}; + +&board_pci0 { + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x4 (PCIX Slot 2) */ + 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 + + /* IDSEL 0x5 (PCIX Slot 3) */ + 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0 + 0x2800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0 + 0x2800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0 + 0x2800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0 + + /* IDSEL 0x6 (PCIX Slot 4) */ + 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0 + 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 + + /* IDSEL 0x8 (PCIX Slot 5) */ + 0x4000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0x4000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0x4000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0x4000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 + + /* IDSEL 0xC (Tsi310 bridge) */ + 0x6000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0x6000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0x6000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0x6000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 + + /* IDSEL 0x14 (Slot 2) */ + 0xa000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0xa000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0xa000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0xa000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 + + /* IDSEL 0x15 (Slot 3) */ + 0xa800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0 + 0xa800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0 + 0xa800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0 + 0xa800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0 + + /* IDSEL 0x16 (Slot 4) */ + 0xb000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0xb000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0xb000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0 + 0xb000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 + + /* IDSEL 0x18 (Slot 5) */ + 0xc000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0xc000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0xc000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0xc000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 + + /* IDSEL 0x1C (Tsi310 bridge PCI primary) */ + 0xe000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0xe000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0xe000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0xe000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>; + + pci_bridge@1c { + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x00 (PrPMC Site) */ + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 + + /* IDSEL 0x04 (VIA chip) */ + 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 + + /* IDSEL 0x05 (8139) */ + 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0 + + /* IDSEL 0x06 (Slot 6) */ + 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0 + 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 + + /* IDESL 0x07 (Slot 7) */ + 0x3800 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 + 0x3800 0x0 0x0 0x2 &mpic 0x0 0x1 0 0 + 0x3800 0x0 0x0 0x3 &mpic 0x1 0x1 0 0 + 0x3800 0x0 0x0 0x4 &mpic 0x2 0x1 0 0>; + + reg = <0xe000 0x0 0x0 0x0 0x0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x80000>; + clock-frequency = <33333333>; + + isa@4 { + device_type = "isa"; + #interrupt-cells = <2>; + #size-cells = <1>; + #address-cells = <2>; + reg = <0x2000 0x0 0x0 0x0 0x0>; + ranges = <0x1 0x0 0x1000000 0x0 0x0 0x1000>; + interrupt-parent = <&i8259>; + + i8259: interrupt-controller@20 { + interrupt-controller; + device_type = "interrupt-controller"; + reg = <0x1 0x20 0x2 + 0x1 0xa0 0x2 + 0x1 0x4d0 0x2>; + #address-cells = <0>; + #interrupt-cells = <2>; + compatible = "chrp,iic"; + interrupts = <0 1 0 0>; + interrupt-parent = <&mpic>; + }; + + rtc@70 { + compatible = "pnpPNP,b00"; + reg = <0x1 0x70 0x2>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8548cds_32b.dts b/arch/powerpc/boot/dts/mpc8548cds_32b.dts new file mode 100644 index 00000000000..6fd63163fc6 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8548cds_32b.dts @@ -0,0 +1,86 @@ +/* + * MPC8548 CDS Device Tree Source (32-bit address map) + * + * Copyright 2006, 2008, 2011-2012 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "fsl/mpc8548si-pre.dtsi" + +/ { + model = "MPC8548CDS"; + compatible = "MPC8548CDS", "MPC85xxCDS"; + + memory { + device_type = "memory"; + reg = <0 0 0x0 0x8000000>; // 128M at 0x0 + }; + + board_lbc: lbc: localbus@e0005000 { + reg = <0 0xe0005000 0 0x1000>; + + ranges = <0x0 0x0 0x0 0xff000000 0x01000000 + 0x1 0x0 0x0 0xf8004000 0x00001000>; + + }; + + board_soc: soc: soc8548@e0000000 { + ranges = <0 0x0 0xe0000000 0x100000>; + }; + + board_pci0: pci0: pci@e0008000 { + reg = <0 0xe0008000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x10000000 + 0x1000000 0x0 0x00000000 0 0xe2000000 0x0 0x800000>; + clock-frequency = <66666666>; + }; + + pci1: pci@e0009000 { + reg = <0 0xe0009000 0 0x1000>; + ranges = <0x2000000 0x0 0x90000000 0 0x90000000 0x0 0x10000000 + 0x1000000 0x0 0x00000000 0 0xe2800000 0x0 0x800000>; + clock-frequency = <66666666>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x15 */ + 0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 0 0 + 0xa800 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0xa800 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0xa800 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>; + }; + + pci2: pcie@e000a000 { + reg = <0 0xe000a000 0 0x1000>; + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xe3000000 0x0 0x100000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + rio: rapidio@e00c0000 { + reg = <0x0 0xe00c0000 0x0 0x20000>; + port1 { + ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x20000000>; + }; + }; +}; + +/* + * mpc8548cds.dtsi must be last to ensure board_pci0 overrides pci0 settings + * for interrupt-map & interrupt-map-mask. + */ + +/include/ "fsl/mpc8548si-post.dtsi" +/include/ "mpc8548cds.dtsi" diff --git a/arch/powerpc/boot/dts/mpc8548cds_36b.dts b/arch/powerpc/boot/dts/mpc8548cds_36b.dts new file mode 100644 index 00000000000..10e551b11bd --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8548cds_36b.dts @@ -0,0 +1,86 @@ +/* + * MPC8548 CDS Device Tree Source (36-bit address map) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "fsl/mpc8548si-pre.dtsi" + +/ { + model = "MPC8548CDS"; + compatible = "MPC8548CDS", "MPC85xxCDS"; + + memory { + device_type = "memory"; + reg = <0 0 0x0 0x8000000>; // 128M at 0x0 + }; + + board_lbc: lbc: localbus@fe0005000 { + reg = <0xf 0xe0005000 0 0x1000>; + + ranges = <0x0 0x0 0xf 0xff000000 0x01000000 + 0x1 0x0 0xf 0xf8004000 0x00001000>; + + }; + + board_soc: soc: soc8548@fe0000000 { + ranges = <0 0xf 0xe0000000 0x100000>; + }; + + board_pci0: pci0: pci@fe0008000 { + reg = <0xf 0xe0008000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x10000000 + 0x1000000 0x0 0x00000000 0xf 0xe2000000 0x0 0x800000>; + clock-frequency = <66666666>; + }; + + pci1: pci@fe0009000 { + reg = <0xf 0xe0009000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0xc 0x10000000 0x0 0x10000000 + 0x1000000 0x0 0x00000000 0xf 0xe2800000 0x0 0x800000>; + clock-frequency = <66666666>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x15 */ + 0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 0 0 + 0xa800 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0xa800 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0xa800 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>; + }; + + pci2: pcie@fe000a000 { + reg = <0xf 0xe000a000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xe3000000 0x0 0x100000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + rio: rapidio@fe00c0000 { + reg = <0xf 0xe00c0000 0x0 0x20000>; + port1 { + ranges = <0x0 0x0 0xc 0x40000000 0x0 0x20000000>; + }; + }; +}; + +/* + * mpc8548cds.dtsi must be last to ensure board_pci0 overrides pci0 settings + * for interrupt-map & interrupt-map-mask. + */ + +/include/ "fsl/mpc8548si-post.dtsi" +/include/ "mpc8548cds.dtsi" diff --git a/arch/powerpc/boot/dts/mpc8572ds.dtsi b/arch/powerpc/boot/dts/mpc8572ds.dtsi index c3d4fac0532..14178944e22 100644 --- a/arch/powerpc/boot/dts/mpc8572ds.dtsi +++ b/arch/powerpc/boot/dts/mpc8572ds.dtsi @@ -41,37 +41,47 @@ bank-width = <2>; device-width = <1>; - ramdisk@0 { + partition@0 { reg = <0x0 0x03000000>; - read-only; + label = "ramdisk-nor"; }; - diagnostic@3000000 { + partition@3000000 { reg = <0x03000000 0x00e00000>; + label = "diagnostic-nor"; read-only; }; - dink@3e00000 { + partition@3e00000 { reg = <0x03e00000 0x00200000>; + label = "dink-nor"; read-only; }; - kernel@4000000 { + partition@4000000 { reg = <0x04000000 0x00400000>; - read-only; + label = "kernel-nor"; }; - jffs2@4400000 { + partition@4400000 { reg = <0x04400000 0x03b00000>; + label = "fs-nor"; + }; + + partition@7f00000 { + reg = <0x07f00000 0x00060000>; + label = "dtb-nor"; }; - dtb@7f00000 { - reg = <0x07f00000 0x00080000>; + partition@7f60000 { + reg = <0x07f60000 0x00020000>; + label = "env-nor"; read-only; }; - u-boot@7f80000 { + partition@7f80000 { reg = <0x07f80000 0x00080000>; + label = "u-boot-nor"; read-only; }; }; @@ -83,31 +93,35 @@ "fsl,elbc-fcm-nand"; reg = <0x2 0x0 0x40000>; - u-boot@0 { + partition@0 { reg = <0x0 0x02000000>; + label = "u-boot-nand"; read-only; }; - jffs2@2000000 { + partition@2000000 { reg = <0x02000000 0x10000000>; + label = "fs-nand"; }; - ramdisk@12000000 { + partition@12000000 { reg = <0x12000000 0x08000000>; - read-only; + label = "ramdisk-nand"; }; - kernel@1a000000 { + partition@1a000000 { reg = <0x1a000000 0x04000000>; + label = "kernel-nand"; }; - dtb@1e000000 { + partition@1e000000 { reg = <0x1e000000 0x01000000>; - read-only; + label = "dtb-nand"; }; - empty@1f000000 { + partition@1f000000 { reg = <0x1f000000 0x21000000>; + label = "empty-nand"; }; }; diff --git a/arch/powerpc/boot/dts/p1010rdb.dtsi b/arch/powerpc/boot/dts/p1010rdb.dtsi index d4c4a773028..49776143a1b 100644 --- a/arch/powerpc/boot/dts/p1010rdb.dtsi +++ b/arch/powerpc/boot/dts/p1010rdb.dtsi @@ -138,7 +138,7 @@ #size-cells = <1>; compatible = "spansion,s25sl12801"; reg = <0>; - spi-max-frequency = <50000000>; + spi-max-frequency = <40000000>; partition@0 { /* 1MB for u-boot Bootloader Image */ @@ -196,7 +196,7 @@ }; tbi-phy@3 { - device-type = "tbi-phy"; + device_type = "tbi-phy"; reg = <0x3>; }; }; diff --git a/arch/powerpc/boot/dts/p1020rdb-pc.dtsi b/arch/powerpc/boot/dts/p1020rdb-pc.dtsi new file mode 100644 index 00000000000..c952cd37cf6 --- /dev/null +++ b/arch/powerpc/boot/dts/p1020rdb-pc.dtsi @@ -0,0 +1,247 @@ +/* + * P1020 RDB-PC Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x1000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* This location must not be altered */ + /* 256KB for Vitesse 7385 Switch firmware */ + reg = <0x0 0x00040000>; + label = "NOR Vitesse-7385 Firmware"; + read-only; + }; + + partition@40000 { + /* 256KB for DTB Image */ + reg = <0x00040000 0x00040000>; + label = "NOR DTB Image"; + }; + + partition@80000 { + /* 3.5 MB for Linux Kernel Image */ + reg = <0x00080000 0x00380000>; + label = "NOR Linux Kernel Image"; + }; + + partition@400000 { + /* 11MB for JFFS2 based Root file System */ + reg = <0x00400000 0x00b00000>; + label = "NOR JFFS2 Root File System"; + }; + + partition@f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x00f00000 0x00100000>; + label = "NOR U-Boot Image"; + read-only; + }; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p1020-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x40000>; + + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND DTB Image"; + }; + + partition@200000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00200000 0x00400000>; + label = "NAND Linux Kernel Image"; + }; + + partition@600000 { + /* 4MB for Compressed Root file System Image */ + reg = <0x00600000 0x00400000>; + label = "NAND Compressed RFS Image"; + }; + + partition@a00000 { + /* 7MB for JFFS2 based Root file System */ + reg = <0x00a00000 0x00700000>; + label = "NAND JFFS2 Root File System"; + }; + + partition@1100000 { + /* 15MB for JFFS2 based Root file System */ + reg = <0x01100000 0x00f00000>; + label = "NAND Writable User area"; + }; + }; + + L2switch@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "vitesse-7385"; + reg = <0x2 0x0 0x20000>; + }; + + cpld@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cpld"; + reg = <0x3 0x0 0x20000>; + read-only; + }; +}; + +&soc { + i2c@3000 { + rtc@68 { + compatible = "pericom,pt7c4338"; + reg = <0x68>; + }; + }; + + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + + partition@u-boot { + /* 512KB for u-boot Bootloader Image */ + reg = <0x0 0x00080000>; + label = "u-boot"; + read-only; + }; + + partition@dtb { + /* 512KB for DTB Image*/ + reg = <0x00080000 0x00080000>; + label = "dtb"; + }; + + partition@kernel { + /* 4MB for Linux Kernel Image */ + reg = <0x00100000 0x00400000>; + label = "kernel"; + }; + + partition@fs { + /* 4MB for Compressed RFS Image */ + reg = <0x00500000 0x00400000>; + label = "file system"; + }; + + partition@jffs-fs { + /* 7MB for JFFS2 based RFS */ + reg = <0x00900000 0x00700000>; + label = "file system jffs2"; + }; + }; + }; + + usb@22000 { + phy_type = "ulpi"; + }; + + /* USB2 is shared with localbus, so it must be disabled + by default. We can't put 'status = "disabled";' here + since U-Boot doesn't clear the status property when + it enables USB2. OTOH, U-Boot does create a new node + when there isn't any. So, just comment it out. + usb@23000 { + phy_type = "ulpi"; + }; + */ + + mdio@24000 { + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <3 1>; + reg = <0x0>; + }; + + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <2 1>; + reg = <0x1>; + }; + + tbi0: tbi-phy@11 { + device_type = "tbi-phy"; + reg = <0x11>; + }; + }; + + mdio@25000 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet0: ethernet@b0000 { + fixed-link = <1 1 1000 0 0>; + phy-connection-type = "rgmii-id"; + + }; + + enet1: ethernet@b1000 { + phy-handle = <&phy0>; + tbi-handle = <&tbi1>; + phy-connection-type = "sgmii"; + }; + + enet2: ethernet@b2000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; +}; diff --git a/arch/powerpc/boot/dts/p1020rdb-pc_32b.dts b/arch/powerpc/boot/dts/p1020rdb-pc_32b.dts new file mode 100644 index 00000000000..4de69b726dc --- /dev/null +++ b/arch/powerpc/boot/dts/p1020rdb-pc_32b.dts @@ -0,0 +1,90 @@ +/* + * P1020 RDB-PC Device Tree Source (32-bit address map) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p1020si-pre.dtsi" +/ { + model = "fsl,P1020RDB-PC"; + compatible = "fsl,P1020RDB-PC"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@ffe05000 { + reg = <0 0xffe05000 0 0x1000>; + + /* NOR, NAND Flashes and Vitesse 5 port L2 switch */ + ranges = <0x0 0x0 0x0 0xef000000 0x01000000 + 0x1 0x0 0x0 0xff800000 0x00040000 + 0x2 0x0 0x0 0xffb00000 0x00020000 + 0x3 0x0 0x0 0xffa00000 0x00020000>; + }; + + soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + }; + + pci0: pcie@ffe09000 { + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + reg = <0 0xffe09000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p1020rdb-pc.dtsi" +/include/ "fsl/p1020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1020rdb-pc_36b.dts b/arch/powerpc/boot/dts/p1020rdb-pc_36b.dts new file mode 100644 index 00000000000..5237da7441b --- /dev/null +++ b/arch/powerpc/boot/dts/p1020rdb-pc_36b.dts @@ -0,0 +1,90 @@ +/* + * P1020 RDB-PC Device Tree Source (36-bit address map) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p1020si-pre.dtsi" +/ { + model = "fsl,P1020RDB-PC"; + compatible = "fsl,P1020RDB-PC"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@fffe05000 { + reg = <0xf 0xffe05000 0 0x1000>; + + /* NOR, NAND Flashes and Vitesse 5 port L2 switch */ + ranges = <0x0 0x0 0xf 0xef000000 0x01000000 + 0x1 0x0 0xf 0xff800000 0x00040000 + 0x2 0x0 0xf 0xffb00000 0x00040000 + 0x3 0x0 0xf 0xffa00000 0x00020000>; + }; + + soc: soc@fffe00000 { + ranges = <0x0 0xf 0xffe00000 0x100000>; + }; + + pci0: pcie@fffe09000 { + reg = <0xf 0xffe09000 0 0x1000>; + ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@fffe0a000 { + reg = <0xf 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p1020rdb-pc.dtsi" +/include/ "fsl/p1020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1020rdb-pc_camp_core0.dts b/arch/powerpc/boot/dts/p1020rdb-pc_camp_core0.dts new file mode 100644 index 00000000000..f411515937e --- /dev/null +++ b/arch/powerpc/boot/dts/p1020rdb-pc_camp_core0.dts @@ -0,0 +1,64 @@ +/* + * P1020 RDB-PC Core0 Device Tree Source in CAMP mode. + * + * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache + * can be shared, all the other devices must be assigned to one core only. + * This dts file allows core0 to have memory, l2, i2c, spi, gpio, tdm, dma, usb, + * eth1, eth2, sdhc, crypto, global-util, message, pci0, pci1, msi. + * + * Please note to add "-b 0" for core0's dts compiling. + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "p1020rdb-pc_32b.dts" + +/ { + model = "fsl,P1020RDB-PC"; + compatible = "fsl,P1020RDB-PC"; + + aliases { + ethernet1 = &enet1; + ethernet2 = &enet2; + serial0 = &serial0; + pci0 = &pci0; + pci1 = &pci1; + }; + + cpus { + PowerPC,P1020@1 { + status = "disabled"; + }; + }; + + memory { + device_type = "memory"; + }; + + localbus@ffe05000 { + status = "disabled"; + }; + + soc@ffe00000 { + serial1: serial@4600 { + status = "disabled"; + }; + + enet0: ethernet@b0000 { + status = "disabled"; + }; + + mpic: pic@40000 { + protected-sources = < + 42 29 30 34 /* serial1, enet0-queue-group0 */ + 17 18 24 45 /* enet0-queue-group1, crypto */ + >; + pic-no-reset; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/p1020rdb-pc_camp_core1.dts b/arch/powerpc/boot/dts/p1020rdb-pc_camp_core1.dts new file mode 100644 index 00000000000..a91335ad82c --- /dev/null +++ b/arch/powerpc/boot/dts/p1020rdb-pc_camp_core1.dts @@ -0,0 +1,142 @@ +/* + * P1020 RDB-PC Core1 Device Tree Source in CAMP mode. + * + * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache + * can be shared, all the other devices must be assigned to one core only. + * This dts allows core1 to have l2, eth0, crypto. + * + * Please note to add "-b 1" for core1's dts compiling. + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "p1020rdb-pc_32b.dts" + +/ { + model = "fsl,P1020RDB-PC"; + compatible = "fsl,P1020RDB-PC"; + + aliases { + ethernet0 = &enet0; + serial0 = &serial1; + }; + + cpus { + PowerPC,P1020@0 { + status = "disabled"; + }; + }; + + memory { + device_type = "memory"; + }; + + localbus@ffe05000 { + status = "disabled"; + }; + + soc@ffe00000 { + ecm-law@0 { + status = "disabled"; + }; + + ecm@1000 { + status = "disabled"; + }; + + memory-controller@2000 { + status = "disabled"; + }; + + i2c@3000 { + status = "disabled"; + }; + + i2c@3100 { + status = "disabled"; + }; + + serial0: serial@4500 { + status = "disabled"; + }; + + spi@7000 { + status = "disabled"; + }; + + gpio: gpio-controller@f000 { + status = "disabled"; + }; + + dma@21300 { + status = "disabled"; + }; + + mdio@24000 { + status = "disabled"; + }; + + mdio@25000 { + status = "disabled"; + }; + + enet1: ethernet@b1000 { + status = "disabled"; + }; + + enet2: ethernet@b2000 { + status = "disabled"; + }; + + usb@22000 { + status = "disabled"; + }; + + sdhci@2e000 { + status = "disabled"; + }; + + mpic: pic@40000 { + protected-sources = < + 16 /* ecm, mem, L2, pci0, pci1 */ + 43 42 59 /* i2c, serial0, spi */ + 47 63 62 /* gpio, tdm */ + 20 21 22 23 /* dma */ + 03 02 /* mdio */ + 35 36 40 /* enet1-queue-group0 */ + 51 52 67 /* enet1-queue-group1 */ + 31 32 33 /* enet2-queue-group0 */ + 25 26 27 /* enet2-queue-group1 */ + 28 72 58 /* usb, sdhci, crypto */ + 0xb0 0xb1 0xb2 /* message */ + 0xb3 0xb4 0xb5 + 0xb6 0xb7 + 0xe0 0xe1 0xe2 /* msi */ + 0xe3 0xe4 0xe5 + 0xe6 0xe7 /* sdhci, crypto , pci */ + >; + pic-no-reset; + }; + + msi@41600 { + status = "disabled"; + }; + + global-utilities@e0000 { //global utilities block + status = "disabled"; + }; + }; + + pci0: pcie@ffe09000 { + status = "disabled"; + }; + + pci1: pcie@ffe0a000 { + status = "disabled"; + }; +}; diff --git a/arch/powerpc/boot/dts/p1021rdb.dts b/arch/powerpc/boot/dts/p1021rdb.dts new file mode 100644 index 00000000000..90b6b4caa27 --- /dev/null +++ b/arch/powerpc/boot/dts/p1021rdb.dts @@ -0,0 +1,96 @@ +/* + * P1021 RDB Device Tree Source + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p1021si-pre.dtsi" +/ { + model = "fsl,P1021RDB"; + compatible = "fsl,P1021RDB-PC"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@ffe05000 { + reg = <0 0xffe05000 0 0x1000>; + + /* NOR, NAND Flashes and Vitesse 5 port L2 switch */ + ranges = <0x0 0x0 0x0 0xef000000 0x01000000 + 0x1 0x0 0x0 0xff800000 0x00040000 + 0x2 0x0 0x0 0xffb00000 0x00020000>; + }; + + soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + }; + + pci0: pcie@ffe09000 { + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + reg = <0 0xffe09000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + qe: qe@ffe80000 { + ranges = <0x0 0x0 0xffe80000 0x40000>; + reg = <0 0xffe80000 0 0x480>; + brg-frequency = <0>; + bus-frequency = <0>; + }; +}; + +/include/ "p1021rdb.dtsi" +/include/ "fsl/p1021si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1021rdb.dtsi b/arch/powerpc/boot/dts/p1021rdb.dtsi new file mode 100644 index 00000000000..b973461ab75 --- /dev/null +++ b/arch/powerpc/boot/dts/p1021rdb.dtsi @@ -0,0 +1,236 @@ +/* + * P1021 RDB Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x1000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* This location must not be altered */ + /* 256KB for Vitesse 7385 Switch firmware */ + reg = <0x0 0x00040000>; + label = "NOR Vitesse-7385 Firmware"; + read-only; + }; + + partition@40000 { + /* 256KB for DTB Image */ + reg = <0x00040000 0x00040000>; + label = "NOR DTB Image"; + }; + + partition@80000 { + /* 3.5 MB for Linux Kernel Image */ + reg = <0x00080000 0x00380000>; + label = "NOR Linux Kernel Image"; + }; + + partition@400000 { + /* 11MB for JFFS2 based Root file System */ + reg = <0x00400000 0x00b00000>; + label = "NOR JFFS2 Root File System"; + }; + + partition@f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x00f00000 0x00100000>; + label = "NOR U-Boot Image"; + }; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p1021-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x40000>; + + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND DTB Image"; + }; + + partition@200000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00200000 0x00400000>; + label = "NAND Linux Kernel Image"; + }; + + partition@600000 { + /* 4MB for Compressed Root file System Image */ + reg = <0x00600000 0x00400000>; + label = "NAND Compressed RFS Image"; + }; + + partition@a00000 { + /* 7MB for JFFS2 based Root file System */ + reg = <0x00a00000 0x00700000>; + label = "NAND JFFS2 Root File System"; + }; + + partition@1100000 { + /* 15MB for User Writable Area */ + reg = <0x01100000 0x00f00000>; + label = "NAND Writable User area"; + }; + }; + + L2switch@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "vitesse-7385"; + reg = <0x2 0x0 0x20000>; + }; +}; + +&soc { + i2c@3000 { + rtc@68 { + compatible = "pericom,pt7c4338"; + reg = <0x68>; + }; + }; + + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + + partition@u-boot { + /* 512KB for u-boot Bootloader Image */ + reg = <0x0 0x00080000>; + label = "SPI Flash U-Boot Image"; + read-only; + }; + + partition@dtb { + /* 512KB for DTB Image */ + reg = <0x00080000 0x00080000>; + label = "SPI Flash DTB Image"; + }; + + partition@kernel { + /* 4MB for Linux Kernel Image */ + reg = <0x00100000 0x00400000>; + label = "SPI Flash Linux Kernel Image"; + }; + + partition@fs { + /* 4MB for Compressed RFS Image */ + reg = <0x00500000 0x00400000>; + label = "SPI Flash Compressed RFSImage"; + }; + + partition@jffs-fs { + /* 7MB for JFFS2 based RFS */ + reg = <0x00900000 0x00700000>; + label = "SPI Flash JFFS2 RFS"; + }; + }; + }; + + usb@22000 { + phy_type = "ulpi"; + }; + + mdio@24000 { + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <3 1 0 0>; + reg = <0x0>; + }; + + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <2 1 0 0>; + reg = <0x1>; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@25000 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26000 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet0: ethernet@b0000 { + fixed-link = <1 1 1000 0 0>; + phy-connection-type = "rgmii-id"; + + }; + + enet1: ethernet@b1000 { + phy-handle = <&phy0>; + tbi-handle = <&tbi1>; + phy-connection-type = "sgmii"; + }; + + enet2: ethernet@b2000 { + phy-handle = <&phy1>; + tbi-handle = <&tbi2>; + phy-connection-type = "rgmii-id"; + }; +}; diff --git a/arch/powerpc/boot/dts/p1021rdb_36b.dts b/arch/powerpc/boot/dts/p1021rdb_36b.dts new file mode 100644 index 00000000000..ea6d8b5fa10 --- /dev/null +++ b/arch/powerpc/boot/dts/p1021rdb_36b.dts @@ -0,0 +1,96 @@ +/* + * P1021 RDB Device Tree Source (36-bit address map) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p1021si-pre.dtsi" +/ { + model = "fsl,P1021RDB"; + compatible = "fsl,P1021RDB-PC"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@fffe05000 { + reg = <0xf 0xffe05000 0 0x1000>; + + /* NOR, NAND Flashes and Vitesse 5 port L2 switch */ + ranges = <0x0 0x0 0xf 0xef000000 0x01000000 + 0x1 0x0 0xf 0xff800000 0x00040000 + 0x2 0x0 0xf 0xffb00000 0x00020000>; + }; + + soc: soc@fffe00000 { + ranges = <0x0 0xf 0xffe00000 0x100000>; + }; + + pci0: pcie@fffe09000 { + ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; + reg = <0xf 0xffe09000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@fffe0a000 { + reg = <0xf 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + qe: qe@fffe80000 { + ranges = <0x0 0xf 0xffe80000 0x40000>; + reg = <0xf 0xffe80000 0 0x480>; + brg-frequency = <0>; + bus-frequency = <0>; + }; +}; + +/include/ "p1021rdb.dtsi" +/include/ "fsl/p1021si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1022ds.dts b/arch/powerpc/boot/dts/p1022ds.dts deleted file mode 100644 index ef95717db4b..00000000000 --- a/arch/powerpc/boot/dts/p1022ds.dts +++ /dev/null @@ -1,274 +0,0 @@ -/* - * P1022 DS 36Bit Physical Address Map Device Tree Source - * - * Copyright 2010 Freescale Semiconductor, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -/include/ "fsl/p1022si-pre.dtsi" -/ { - model = "fsl,P1022DS"; - compatible = "fsl,P1022DS"; - - memory { - device_type = "memory"; - }; - - lbc: localbus@fffe05000 { - reg = <0xf 0xffe05000 0 0x1000>; - ranges = <0x0 0x0 0xf 0xe8000000 0x08000000 - 0x1 0x0 0xf 0xe0000000 0x08000000 - 0x2 0x0 0xf 0xff800000 0x00040000 - 0x3 0x0 0xf 0xffdf0000 0x00008000>; - - /* - * This node is used to access the pixis via "indirect" mode, - * which is done by writing the pixis register index to chip - * select 0 and the value to/from chip select 1. Indirect - * mode is the only way to access the pixis when DIU video - * is enabled. Note that this assumes that the first column - * of the 'ranges' property above is the chip select number. - */ - board-control@0,0 { - compatible = "fsl,p1022ds-indirect-pixis"; - reg = <0x0 0x0 1 /* CS0 */ - 0x1 0x0 1>; /* CS1 */ - }; - - nor@0,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "cfi-flash"; - reg = <0x0 0x0 0x8000000>; - bank-width = <2>; - device-width = <1>; - - partition@0 { - reg = <0x0 0x03000000>; - label = "ramdisk-nor"; - read-only; - }; - - partition@3000000 { - reg = <0x03000000 0x00e00000>; - label = "diagnostic-nor"; - read-only; - }; - - partition@3e00000 { - reg = <0x03e00000 0x00200000>; - label = "dink-nor"; - read-only; - }; - - partition@4000000 { - reg = <0x04000000 0x00400000>; - label = "kernel-nor"; - read-only; - }; - - partition@4400000 { - reg = <0x04400000 0x03b00000>; - label = "jffs2-nor"; - }; - - partition@7f00000 { - reg = <0x07f00000 0x00080000>; - label = "dtb-nor"; - read-only; - }; - - partition@7f80000 { - reg = <0x07f80000 0x00080000>; - label = "u-boot-nor"; - read-only; - }; - }; - - nand@2,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,elbc-fcm-nand"; - reg = <0x2 0x0 0x40000>; - - partition@0 { - reg = <0x0 0x02000000>; - label = "u-boot-nand"; - read-only; - }; - - partition@2000000 { - reg = <0x02000000 0x10000000>; - label = "jffs2-nand"; - }; - - partition@12000000 { - reg = <0x12000000 0x10000000>; - label = "ramdisk-nand"; - read-only; - }; - - partition@22000000 { - reg = <0x22000000 0x04000000>; - label = "kernel-nand"; - }; - - partition@26000000 { - reg = <0x26000000 0x01000000>; - label = "dtb-nand"; - read-only; - }; - - partition@27000000 { - reg = <0x27000000 0x19000000>; - label = "reserved-nand"; - }; - }; - - board-control@3,0 { - compatible = "fsl,p1022ds-fpga", "fsl,fpga-ngpixis"; - reg = <3 0 0x30>; - interrupt-parent = <&mpic>; - /* - * IRQ8 is generated if the "EVENT" switch is pressed - * and PX_CTL[EVESEL] is set to 00. - */ - interrupts = <8 8 0 0>; - }; - }; - - soc: soc@fffe00000 { - ranges = <0x0 0xf 0xffe00000 0x100000>; - - i2c@3100 { - wm8776:codec@1a { - compatible = "wlf,wm8776"; - reg = <0x1a>; - /* - * clock-frequency will be set by U-Boot if - * the clock is enabled. - */ - }; - }; - - spi@7000 { - flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "spansion,s25sl12801"; - reg = <0>; - spi-max-frequency = <40000000>; /* input clock */ - - partition@0 { - label = "u-boot-spi"; - reg = <0x00000000 0x00100000>; - read-only; - }; - partition@100000 { - label = "kernel-spi"; - reg = <0x00100000 0x00500000>; - read-only; - }; - partition@600000 { - label = "dtb-spi"; - reg = <0x00600000 0x00100000>; - read-only; - }; - partition@700000 { - label = "file system-spi"; - reg = <0x00700000 0x00900000>; - }; - }; - }; - - ssi@15000 { - fsl,mode = "i2s-slave"; - codec-handle = <&wm8776>; - fsl,ssi-asynchronous; - }; - - usb@22000 { - phy_type = "ulpi"; - }; - - usb@23000 { - status = "disabled"; - }; - - mdio@24000 { - phy0: ethernet-phy@0 { - interrupts = <3 1 0 0>; - reg = <0x1>; - }; - phy1: ethernet-phy@1 { - interrupts = <9 1 0 0>; - reg = <0x2>; - }; - tbi-phy@2 { - device_type = "tbi-phy"; - reg = <0x2>; - }; - }; - - ethernet@b0000 { - phy-handle = <&phy0>; - phy-connection-type = "rgmii-id"; - }; - - ethernet@b1000 { - phy-handle = <&phy1>; - phy-connection-type = "rgmii-id"; - }; - }; - - pci0: pcie@fffe09000 { - reg = <0xf 0xffe09000 0 0x1000>; - ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 - 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; - pcie@0 { - ranges = <0x2000000 0x0 0xe0000000 - 0x2000000 0x0 0xe0000000 - 0x0 0x20000000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x100000>; - }; - }; - - pci1: pcie@fffe0a000 { - reg = <0xf 0xffe0a000 0 0x1000>; - ranges = <0x2000000 0x0 0xe0000000 0xc 0x40000000 0x0 0x20000000 - 0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x10000>; - pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - ranges = <0x2000000 0x0 0xe0000000 - 0x2000000 0x0 0xe0000000 - 0x0 0x20000000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x100000>; - }; - }; - - pci2: pcie@fffe0b000 { - reg = <0xf 0xffe0b000 0 0x1000>; - ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000 - 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>; - pcie@0 { - ranges = <0x2000000 0x0 0xe0000000 - 0x2000000 0x0 0xe0000000 - 0x0 0x20000000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x100000>; - }; - }; -}; - -/include/ "fsl/p1022si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1022ds.dtsi b/arch/powerpc/boot/dts/p1022ds.dtsi new file mode 100644 index 00000000000..7cdb505036b --- /dev/null +++ b/arch/powerpc/boot/dts/p1022ds.dtsi @@ -0,0 +1,234 @@ +/* + * P1022 DS Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&board_lbc { + /* + * This node is used to access the pixis via "indirect" mode, + * which is done by writing the pixis register index to chip + * select 0 and the value to/from chip select 1. Indirect + * mode is the only way to access the pixis when DIU video + * is enabled. Note that this assumes that the first column + * of the 'ranges' property above is the chip select number. + */ + board-control@0,0 { + compatible = "fsl,p1022ds-indirect-pixis"; + reg = <0x0 0x0 1 /* CS0 */ + 0x1 0x0 1>; /* CS1 */ + interrupt-parent = <&mpic>; + interrupts = <8 0 0 0>; + }; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + reg = <0x0 0x03000000>; + label = "ramdisk-nor"; + read-only; + }; + + partition@3000000 { + reg = <0x03000000 0x00e00000>; + label = "diagnostic-nor"; + read-only; + }; + + partition@3e00000 { + reg = <0x03e00000 0x00200000>; + label = "dink-nor"; + read-only; + }; + + partition@4000000 { + reg = <0x04000000 0x00400000>; + label = "kernel-nor"; + read-only; + }; + + partition@4400000 { + reg = <0x04400000 0x03b00000>; + label = "jffs2-nor"; + }; + + partition@7f00000 { + reg = <0x07f00000 0x00080000>; + label = "dtb-nor"; + read-only; + }; + + partition@7f80000 { + reg = <0x07f80000 0x00080000>; + label = "u-boot-nor"; + read-only; + }; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,elbc-fcm-nand"; + reg = <0x2 0x0 0x40000>; + + partition@0 { + reg = <0x0 0x02000000>; + label = "u-boot-nand"; + read-only; + }; + + partition@2000000 { + reg = <0x02000000 0x10000000>; + label = "jffs2-nand"; + }; + + partition@12000000 { + reg = <0x12000000 0x10000000>; + label = "ramdisk-nand"; + read-only; + }; + + partition@22000000 { + reg = <0x22000000 0x04000000>; + label = "kernel-nand"; + }; + + partition@26000000 { + reg = <0x26000000 0x01000000>; + label = "dtb-nand"; + read-only; + }; + + partition@27000000 { + reg = <0x27000000 0x19000000>; + label = "reserved-nand"; + }; + }; + + board-control@3,0 { + compatible = "fsl,p1022ds-fpga", "fsl,fpga-ngpixis"; + reg = <3 0 0x30>; + interrupt-parent = <&mpic>; + /* + * IRQ8 is generated if the "EVENT" switch is pressed + * and PX_CTL[EVESEL] is set to 00. + */ + interrupts = <8 0 0 0>; + }; +}; + +&board_soc { + i2c@3100 { + wm8776:codec@1a { + compatible = "wlf,wm8776"; + reg = <0x1a>; + /* + * clock-frequency will be set by U-Boot if + * the clock is enabled. + */ + }; + }; + + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + + partition@0 { + label = "u-boot-spi"; + reg = <0x00000000 0x00100000>; + read-only; + }; + partition@100000 { + label = "kernel-spi"; + reg = <0x00100000 0x00500000>; + read-only; + }; + partition@600000 { + label = "dtb-spi"; + reg = <0x00600000 0x00100000>; + read-only; + }; + partition@700000 { + label = "file system-spi"; + reg = <0x00700000 0x00900000>; + }; + }; + }; + + ssi@15000 { + fsl,mode = "i2s-slave"; + codec-handle = <&wm8776>; + fsl,ssi-asynchronous; + }; + + usb@22000 { + phy_type = "ulpi"; + }; + + usb@23000 { + status = "disabled"; + }; + + mdio@24000 { + phy0: ethernet-phy@0 { + interrupts = <3 1 0 0>; + reg = <0x1>; + }; + phy1: ethernet-phy@1 { + interrupts = <9 1 0 0>; + reg = <0x2>; + }; + tbi-phy@2 { + device_type = "tbi-phy"; + reg = <0x2>; + }; + }; + + ethernet@b0000 { + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + }; + + ethernet@b1000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; +}; diff --git a/arch/powerpc/boot/dts/p1022ds_32b.dts b/arch/powerpc/boot/dts/p1022ds_32b.dts new file mode 100644 index 00000000000..d96cae00a9e --- /dev/null +++ b/arch/powerpc/boot/dts/p1022ds_32b.dts @@ -0,0 +1,103 @@ +/* + * P1022 DS 32-bit Physical Address Map Device Tree Source + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p1022si-pre.dtsi" +/ { + model = "fsl,P1022DS"; + compatible = "fsl,P1022DS"; + + memory { + device_type = "memory"; + }; + + board_lbc: lbc: localbus@ffe05000 { + ranges = <0x0 0x0 0x0 0xe8000000 0x08000000 + 0x1 0x0 0x0 0xe0000000 0x08000000 + 0x2 0x0 0x0 0xff800000 0x00040000 + 0x3 0x0 0x0 0xffdf0000 0x00008000>; + reg = <0x0 0xffe05000 0 0x1000>; + }; + + board_soc: soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + }; + + pci0: pcie@ffe09000 { + ranges = <0x2000000 0x0 0xe0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + reg = <0x0 0xffe09000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@ffe0a000 { + ranges = <0x2000000 0x0 0xe0000000 0 0xc0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>; + reg = <0 0xffe0a000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci2: pcie@ffe0b000 { + ranges = <0x2000000 0x0 0xe0000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + reg = <0 0xffe0b000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "fsl/p1022si-post.dtsi" +/include/ "p1022ds.dtsi" diff --git a/arch/powerpc/boot/dts/p1022ds_36b.dts b/arch/powerpc/boot/dts/p1022ds_36b.dts new file mode 100644 index 00000000000..f7aacce40bf --- /dev/null +++ b/arch/powerpc/boot/dts/p1022ds_36b.dts @@ -0,0 +1,103 @@ +/* + * P1022 DS 36-bit Physical Address Map Device Tree Source + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p1022si-pre.dtsi" +/ { + model = "fsl,P1022DS"; + compatible = "fsl,P1022DS"; + + memory { + device_type = "memory"; + }; + + board_lbc: lbc: localbus@fffe05000 { + ranges = <0x0 0x0 0xf 0xe8000000 0x08000000 + 0x1 0x0 0xf 0xe0000000 0x08000000 + 0x2 0x0 0xf 0xff800000 0x00040000 + 0x3 0x0 0xf 0xffdf0000 0x00008000>; + reg = <0xf 0xffe05000 0 0x1000>; + }; + + board_soc: soc: soc@fffe00000 { + ranges = <0x0 0xf 0xffe00000 0x100000>; + }; + + pci0: pcie@fffe09000 { + ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; + reg = <0xf 0xffe09000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@fffe0a000 { + ranges = <0x2000000 0x0 0xe0000000 0xc 0x40000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x10000>; + reg = <0xf 0xffe0a000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci2: pcie@fffe0b000 { + ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>; + reg = <0xf 0xffe0b000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "fsl/p1022si-post.dtsi" +/include/ "p1022ds.dtsi" diff --git a/arch/powerpc/boot/dts/p1025rdb.dtsi b/arch/powerpc/boot/dts/p1025rdb.dtsi new file mode 100644 index 00000000000..cf3676fc714 --- /dev/null +++ b/arch/powerpc/boot/dts/p1025rdb.dtsi @@ -0,0 +1,286 @@ +/* + * P1025 RDB Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x1000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* This location must not be altered */ + /* 256KB for Vitesse 7385 Switch firmware */ + reg = <0x0 0x00040000>; + label = "NOR Vitesse-7385 Firmware"; + read-only; + }; + + partition@40000 { + /* 256KB for DTB Image */ + reg = <0x00040000 0x00040000>; + label = "NOR DTB Image"; + }; + + partition@80000 { + /* 3.5 MB for Linux Kernel Image */ + reg = <0x00080000 0x00380000>; + label = "NOR Linux Kernel Image"; + }; + + partition@400000 { + /* 11MB for JFFS2 based Root file System */ + reg = <0x00400000 0x00b00000>; + label = "NOR JFFS2 Root File System"; + }; + + partition@f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x00f00000 0x00100000>; + label = "NOR U-Boot Image"; + read-only; + }; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p1025-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x40000>; + + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND DTB Image"; + }; + + partition@200000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00200000 0x00400000>; + label = "NAND Linux Kernel Image"; + }; + + partition@600000 { + /* 4MB for Compressed Root file System Image */ + reg = <0x00600000 0x00400000>; + label = "NAND Compressed RFS Image"; + }; + + partition@a00000 { + /* 7MB for JFFS2 based Root file System */ + reg = <0x00a00000 0x00700000>; + label = "NAND JFFS2 Root File System"; + }; + + partition@1100000 { + /* 15MB for JFFS2 based Root file System */ + reg = <0x01100000 0x00f00000>; + label = "NAND Writable User area"; + }; + }; + +}; + +&soc { + i2c@3000 { + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + }; + + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + + partition@u-boot { + /* 512KB for u-boot Bootloader Image */ + reg = <0x0 0x00080000>; + label = "u-boot"; + read-only; + }; + + partition@dtb { + /* 512KB for DTB Image */ + reg = <0x00080000 0x00080000>; + label = "dtb"; + }; + + partition@kernel { + /* 4MB for Linux Kernel Image */ + reg = <0x00100000 0x00400000>; + label = "kernel"; + }; + + partition@fs { + /* 4MB for Compressed RFS Image */ + reg = <0x00500000 0x00400000>; + label = "file system"; + }; + + partition@jffs-fs { + /* 7MB for JFFS2 based RFS */ + reg = <0x00900000 0x00700000>; + label = "file system jffs2"; + }; + }; + }; + + usb@22000 { + phy_type = "ulpi"; + }; + + /* USB2 is shared with localbus, so it must be disabled + by default. We can't put 'status = "disabled";' here + since U-Boot doesn't clear the status property when + it enables USB2. OTOH, U-Boot does create a new node + when there isn't any. So, just comment it out. + usb@23000 { + phy_type = "ulpi"; + }; + */ + + mdio@24000 { + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <3 1>; + reg = <0x0>; + }; + + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <2 1>; + reg = <0x1>; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@25000 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26000 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet0: ethernet@b0000 { + fixed-link = <1 1 1000 0 0>; + phy-connection-type = "rgmii-id"; + + }; + + enet1: ethernet@b1000 { + phy-handle = <&phy0>; + tbi-handle = <&tbi1>; + phy-connection-type = "sgmii"; + }; + + enet2: ethernet@b2000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; + + par_io@e0100 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xe0100 0x60>; + ranges = <0x0 0xe0100 0x60>; + device_type = "par_io"; + num-ports = <3>; + pio1: ucc_pin@01 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */ + 0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */ + 0x0 0x17 0x2 0x0 0x2 0x0 /* CLK12 */ + 0x0 0x18 0x2 0x0 0x1 0x0 /* CLK9 */ + 0x0 0x7 0x1 0x0 0x2 0x0 /* ENET1_TXD0_SER1_TXD0 */ + 0x0 0x9 0x1 0x0 0x2 0x0 /* ENET1_TXD1_SER1_TXD1 */ + 0x0 0xb 0x1 0x0 0x2 0x0 /* ENET1_TXD2_SER1_TXD2 */ + 0x0 0xc 0x1 0x0 0x2 0x0 /* ENET1_TXD3_SER1_TXD3 */ + 0x0 0x6 0x2 0x0 0x2 0x0 /* ENET1_RXD0_SER1_RXD0 */ + 0x0 0xa 0x2 0x0 0x2 0x0 /* ENET1_RXD1_SER1_RXD1 */ + 0x0 0xe 0x2 0x0 0x2 0x0 /* ENET1_RXD2_SER1_RXD2 */ + 0x0 0xf 0x2 0x0 0x2 0x0 /* ENET1_RXD3_SER1_RXD3 */ + 0x0 0x5 0x1 0x0 0x2 0x0 /* ENET1_TX_EN_SER1_RTS_B */ + 0x0 0xd 0x1 0x0 0x2 0x0 /* ENET1_TX_ER */ + 0x0 0x4 0x2 0x0 0x2 0x0 /* ENET1_RX_DV_SER1_CTS_B */ + 0x0 0x8 0x2 0x0 0x2 0x0 /* ENET1_RX_ER_SER1_CD_B */ + 0x0 0x11 0x2 0x0 0x2 0x0 /* ENET1_CRS */ + 0x0 0x10 0x2 0x0 0x2 0x0>; /* ENET1_COL */ + }; + + pio2: ucc_pin@02 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */ + 0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */ + 0x1 0xb 0x2 0x0 0x1 0x0 /* CLK13 */ + 0x1 0x7 0x1 0x0 0x2 0x0 /* ENET5_TXD0_SER5_TXD0 */ + 0x1 0xa 0x1 0x0 0x2 0x0 /* ENET5_TXD1_SER5_TXD1 */ + 0x1 0x6 0x2 0x0 0x2 0x0 /* ENET5_RXD0_SER5_RXD0 */ + 0x1 0x9 0x2 0x0 0x2 0x0 /* ENET5_RXD1_SER5_RXD1 */ + 0x1 0x5 0x1 0x0 0x2 0x0 /* ENET5_TX_EN_SER5_RTS_B */ + 0x1 0x4 0x2 0x0 0x2 0x0 /* ENET5_RX_DV_SER5_CTS_B */ + 0x1 0x8 0x2 0x0 0x2 0x0>; /* ENET5_RX_ER_SER5_CD_B */ + }; + }; +}; diff --git a/arch/powerpc/boot/dts/p1025rdb_32b.dts b/arch/powerpc/boot/dts/p1025rdb_32b.dts new file mode 100644 index 00000000000..ac5729c14ed --- /dev/null +++ b/arch/powerpc/boot/dts/p1025rdb_32b.dts @@ -0,0 +1,135 @@ +/* + * P1025 RDB Device Tree Source (32-bit address map) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p1021si-pre.dtsi" +/ { + model = "fsl,P1025RDB"; + compatible = "fsl,P1025RDB"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@ffe05000 { + reg = <0 0xffe05000 0 0x1000>; + + /* NOR, NAND Flashes */ + ranges = <0x0 0x0 0x0 0xef000000 0x01000000 + 0x1 0x0 0x0 0xff800000 0x00040000>; + }; + + soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + }; + + pci0: pcie@ffe09000 { + ranges = <0x2000000 0x0 0xe0000000 0 0xe0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + reg = <0 0xffe09000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0 0xe0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + qe: qe@ffe80000 { + ranges = <0x0 0x0 0xffe80000 0x40000>; + reg = <0 0xffe80000 0 0x480>; + brg-frequency = <0>; + bus-frequency = <0>; + status = "disabled"; /* no firmware loaded */ + + enet3: ucc@2000 { + device_type = "network"; + compatible = "ucc_geth"; + rx-clock-name = "clk12"; + tx-clock-name = "clk9"; + pio-handle = <&pio1>; + phy-handle = <&qe_phy0>; + phy-connection-type = "mii"; + }; + + mdio@2120 { + qe_phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <4 1 0 0>; + reg = <0x6>; + device_type = "ethernet-phy"; + }; + qe_phy1: ethernet-phy@03 { + interrupt-parent = <&mpic>; + interrupts = <5 1 0 0>; + reg = <0x3>; + device_type = "ethernet-phy"; + }; + tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet4: ucc@2400 { + device_type = "network"; + compatible = "ucc_geth"; + rx-clock-name = "none"; + tx-clock-name = "clk13"; + pio-handle = <&pio2>; + phy-handle = <&qe_phy1>; + phy-connection-type = "rmii"; + }; + }; +}; + +/include/ "p1025rdb.dtsi" +/include/ "fsl/p1021si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1025rdb_36b.dts b/arch/powerpc/boot/dts/p1025rdb_36b.dts new file mode 100644 index 00000000000..4ce4bfa0eda --- /dev/null +++ b/arch/powerpc/boot/dts/p1025rdb_36b.dts @@ -0,0 +1,88 @@ +/* + * P1025 RDB Device Tree Source (36-bit address map) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p1021si-pre.dtsi" +/ { + model = "fsl,P1025RDB"; + compatible = "fsl,P1025RDB"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@fffe05000 { + reg = <0xf 0xffe05000 0 0x1000>; + + /* NOR, NAND Flashes */ + ranges = <0x0 0x0 0xf 0xef000000 0x01000000 + 0x1 0x0 0xf 0xff800000 0x00040000>; + }; + + soc: soc@fffe00000 { + ranges = <0x0 0xf 0xffe00000 0x100000>; + }; + + pci0: pcie@fffe09000 { + reg = <0xf 0xffe09000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0xe 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@fffe0a000 { + reg = <0xf 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p1025rdb.dtsi" +/include/ "fsl/p1021si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p2020rdb-pc.dtsi b/arch/powerpc/boot/dts/p2020rdb-pc.dtsi new file mode 100644 index 00000000000..c21d1c7d16c --- /dev/null +++ b/arch/powerpc/boot/dts/p2020rdb-pc.dtsi @@ -0,0 +1,241 @@ +/* + * P2020 RDB-PC Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x1000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* This location must not be altered */ + /* 256KB for Vitesse 7385 Switch firmware */ + reg = <0x0 0x00040000>; + label = "NOR Vitesse-7385 Firmware"; + read-only; + }; + + partition@40000 { + /* 256KB for DTB Image */ + reg = <0x00040000 0x00040000>; + label = "NOR DTB Image"; + }; + + partition@80000 { + /* 3.5 MB for Linux Kernel Image */ + reg = <0x00080000 0x00380000>; + label = "NOR Linux Kernel Image"; + }; + + partition@400000 { + /* 11MB for JFFS2 based Root file System */ + reg = <0x00400000 0x00b00000>; + label = "NOR JFFS2 Root File System"; + }; + + partition@f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x00f00000 0x00100000>; + label = "NOR U-Boot Image"; + read-only; + }; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p2020-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x40000>; + + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND DTB Image"; + }; + + partition@200000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00200000 0x00400000>; + label = "NAND Linux Kernel Image"; + }; + + partition@600000 { + /* 4MB for Compressed Root file System Image */ + reg = <0x00600000 0x00400000>; + label = "NAND Compressed RFS Image"; + }; + + partition@a00000 { + /* 7MB for JFFS2 based Root file System */ + reg = <0x00a00000 0x00700000>; + label = "NAND JFFS2 Root File System"; + }; + + partition@1100000 { + /* 15MB for JFFS2 based Root file System */ + reg = <0x01100000 0x00f00000>; + label = "NAND Writable User area"; + }; + }; + + L2switch@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "vitesse-7385"; + reg = <0x2 0x0 0x20000>; + }; + + cpld@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cpld"; + reg = <0x3 0x0 0x20000>; + read-only; + }; +}; + +&soc { + i2c@3000 { + rtc@68 { + compatible = "pericom,pt7c4338"; + reg = <0x68>; + }; + }; + + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,m25p80"; + reg = <0>; + spi-max-frequency = <40000000>; + + partition@0 { + /* 512KB for u-boot Bootloader Image */ + reg = <0x0 0x00080000>; + label = "SPI U-Boot Image"; + read-only; + }; + + partition@80000 { + /* 512KB for DTB Image */ + reg = <0x00080000 0x00080000>; + label = "SPI DTB Image"; + }; + + partition@100000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00100000 0x00400000>; + label = "SPI Linux Kernel Image"; + }; + + partition@500000 { + /* 4MB for Compressed RFS Image */ + reg = <0x00500000 0x00400000>; + label = "SPI Compressed RFS Image"; + }; + + partition@900000 { + /* 7MB for JFFS2 based RFS */ + reg = <0x00900000 0x00700000>; + label = "SPI JFFS2 RFS"; + }; + }; + }; + + usb@22000 { + phy_type = "ulpi"; + }; + + mdio@24520 { + phy0: ethernet-phy@0 { + interrupts = <3 1 0 0>; + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + interrupts = <2 1 0 0>; + reg = <0x1>; + }; + }; + + mdio@25520 { + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26520 { + status = "disabled"; + }; + + ptp_clock@24e00 { + fsl,tclk-period = <5>; + fsl,tmr-prsc = <200>; + fsl,tmr-add = <0xCCCCCCCD>; + fsl,tmr-fiper1 = <0x3B9AC9FB>; + fsl,tmr-fiper2 = <0x0001869B>; + fsl,max-adj = <249999999>; + }; + + enet0: ethernet@24000 { + fixed-link = <1 1 1000 0 0>; + phy-connection-type = "rgmii-id"; + }; + + enet1: ethernet@25000 { + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + phy-connection-type = "sgmii"; + }; + + enet2: ethernet@26000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; +}; diff --git a/arch/powerpc/boot/dts/p2020rdb-pc_32b.dts b/arch/powerpc/boot/dts/p2020rdb-pc_32b.dts new file mode 100644 index 00000000000..852e5b27485 --- /dev/null +++ b/arch/powerpc/boot/dts/p2020rdb-pc_32b.dts @@ -0,0 +1,96 @@ +/* + * P2020 RDB-PC 32Bit Physical Address Map Device Tree Source + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p2020si-pre.dtsi" + +/ { + model = "fsl,P2020RDB"; + compatible = "fsl,P2020RDB-PC"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@ffe05000 { + reg = <0 0xffe05000 0 0x1000>; + + /* NOR and NAND Flashes */ + ranges = <0x0 0x0 0x0 0xef000000 0x01000000 + 0x1 0x0 0x0 0xff800000 0x00040000 + 0x2 0x0 0x0 0xffb00000 0x00020000 + 0x3 0x0 0x0 0xffa00000 0x00020000>; + }; + + soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + }; + + pci0: pcie@ffe08000 { + reg = <0 0xffe08000 0 0x1000>; + status = "disabled"; + }; + + pci1: pcie@ffe09000 { + reg = <0 0xffe09000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci2: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p2020rdb-pc.dtsi" +/include/ "fsl/p2020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p2020rdb-pc_36b.dts b/arch/powerpc/boot/dts/p2020rdb-pc_36b.dts new file mode 100644 index 00000000000..b5a56ca51cf --- /dev/null +++ b/arch/powerpc/boot/dts/p2020rdb-pc_36b.dts @@ -0,0 +1,96 @@ +/* + * P2020 RDB-PC 36Bit Physical Address Map Device Tree Source + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p2020si-pre.dtsi" + +/ { + model = "fsl,P2020RDB"; + compatible = "fsl,P2020RDB-PC"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@fffe05000 { + reg = <0xf 0xffe05000 0 0x1000>; + + /* NOR and NAND Flashes */ + ranges = <0x0 0x0 0xf 0xef000000 0x01000000 + 0x1 0x0 0xf 0xff800000 0x00040000 + 0x2 0x0 0xf 0xffb00000 0x00020000 + 0x3 0x0 0xf 0xffa00000 0x00020000>; + }; + + soc: soc@fffe00000 { + ranges = <0x0 0xf 0xffe00000 0x100000>; + }; + + pci0: pcie@fffe08000 { + reg = <0xf 0xffe08000 0 0x1000>; + status = "disabled"; + }; + + pci1: pcie@fffe09000 { + reg = <0xf 0xffe09000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci2: pcie@fffe0a000 { + reg = <0xf 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p2020rdb-pc.dtsi" +/include/ "fsl/p2020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p2020rdb.dts b/arch/powerpc/boot/dts/p2020rdb.dts index eb8a6aa2bda..153bc76bb48 100644 --- a/arch/powerpc/boot/dts/p2020rdb.dts +++ b/arch/powerpc/boot/dts/p2020rdb.dts @@ -34,7 +34,7 @@ /* NOR and NAND Flashes */ ranges = <0x0 0x0 0x0 0xef000000 0x01000000 - 0x1 0x0 0x0 0xffa00000 0x00040000 + 0x1 0x0 0x0 0xff800000 0x00040000 0x2 0x0 0x0 0xffb00000 0x00020000>; nor@0,0 { @@ -157,7 +157,7 @@ #size-cells = <1>; compatible = "spansion,s25sl12801"; reg = <0>; - spi-max-frequency = <50000000>; + spi-max-frequency = <40000000>; partition@0 { /* 512KB for u-boot Bootloader Image */ |