summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/boot/dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/boot/dts')
-rw-r--r--arch/powerpc/boot/dts/bluestone.dts8
-rw-r--r--arch/powerpc/boot/dts/canyonlands.dts31
-rw-r--r--arch/powerpc/boot/dts/cm5200.dts194
-rw-r--r--arch/powerpc/boot/dts/digsy_mtc.dts177
-rw-r--r--arch/powerpc/boot/dts/hotfoot.dts2
-rw-r--r--arch/powerpc/boot/dts/kilauea.dts9
-rw-r--r--arch/powerpc/boot/dts/lite5200b.dts220
-rw-r--r--arch/powerpc/boot/dts/media5200.dts214
-rw-r--r--arch/powerpc/boot/dts/motionpro.dts194
-rw-r--r--arch/powerpc/boot/dts/mpc5200b.dtsi275
-rw-r--r--arch/powerpc/boot/dts/mpc8308_p1m.dts8
-rw-r--r--arch/powerpc/boot/dts/mpc8308rdb.dts8
-rw-r--r--arch/powerpc/boot/dts/mucmc52.dts174
-rw-r--r--arch/powerpc/boot/dts/pcm030.dts196
-rw-r--r--arch/powerpc/boot/dts/pcm032.dts242
-rw-r--r--arch/powerpc/boot/dts/uc101.dts160
16 files changed, 559 insertions, 1553 deletions
diff --git a/arch/powerpc/boot/dts/bluestone.dts b/arch/powerpc/boot/dts/bluestone.dts
index 9bb3d72c0e5..2a56a0dbd1f 100644
--- a/arch/powerpc/boot/dts/bluestone.dts
+++ b/arch/powerpc/boot/dts/bluestone.dts
@@ -33,7 +33,7 @@
aliases {
ethernet0 = &EMAC0;
serial0 = &UART0;
- serial1 = &UART1;
+ //serial1 = &UART1; --gcl missing UART1 label
};
cpus {
@@ -52,7 +52,7 @@
d-cache-size = <32768>;
dcr-controller;
dcr-access-method = "native";
- next-level-cache = <&L2C0>;
+ //next-level-cache = <&L2C0>; --gcl missing L2C0 label
};
};
@@ -142,7 +142,7 @@
/*RXEOB*/ 0x7 0x4
/*SERR*/ 0x3 0x4
/*TXDE*/ 0x4 0x4
- /*RXDE*/ 0x5 0x4
+ /*RXDE*/ 0x5 0x4>;
};
POB0: opb {
@@ -182,7 +182,7 @@
reg = <0x001a0000 0x00060000>;
};
};
- }
+ };
UART0: serial@ef600300 {
device_type = "serial";
diff --git a/arch/powerpc/boot/dts/canyonlands.dts b/arch/powerpc/boot/dts/canyonlands.dts
index a3037039625..5b27a4b74b7 100644
--- a/arch/powerpc/boot/dts/canyonlands.dts
+++ b/arch/powerpc/boot/dts/canyonlands.dts
@@ -105,6 +105,15 @@
dcr-reg = <0x00c 0x002>;
};
+ CPM0: cpm {
+ compatible = "ibm,cpm";
+ dcr-access-method = "native";
+ dcr-reg = <0x160 0x003>;
+ unused-units = <0x00000100>;
+ idle-doze = <0x02000000>;
+ standby = <0xfeff791d>;
+ };
+
L2C0: l2c {
compatible = "ibm,l2-cache-460ex", "ibm,l2-cache";
dcr-reg = <0x020 0x008 /* Internal SRAM DCR's */
@@ -270,28 +279,6 @@
interrupts = <0x1 0x4>;
};
- UART2: serial@ef600500 {
- device_type = "serial";
- compatible = "ns16550";
- reg = <0xef600500 0x00000008>;
- virtual-reg = <0xef600500>;
- clock-frequency = <0>; /* Filled in by U-Boot */
- current-speed = <0>; /* Filled in by U-Boot */
- interrupt-parent = <&UIC1>;
- interrupts = <28 0x4>;
- };
-
- UART3: serial@ef600600 {
- device_type = "serial";
- compatible = "ns16550";
- reg = <0xef600600 0x00000008>;
- virtual-reg = <0xef600600>;
- clock-frequency = <0>; /* Filled in by U-Boot */
- current-speed = <0>; /* Filled in by U-Boot */
- interrupt-parent = <&UIC1>;
- interrupts = <29 0x4>;
- };
-
IIC0: i2c@ef600700 {
compatible = "ibm,iic-460ex", "ibm,iic";
reg = <0xef600700 0x00000014>;
diff --git a/arch/powerpc/boot/dts/cm5200.dts b/arch/powerpc/boot/dts/cm5200.dts
index dd3860846f1..ad3a4f4a2b0 100644
--- a/arch/powerpc/boot/dts/cm5200.dts
+++ b/arch/powerpc/boot/dts/cm5200.dts
@@ -10,220 +10,74 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "mpc5200b.dtsi"
/ {
model = "schindler,cm5200";
compatible = "schindler,cm5200";
- #address-cells = <1>;
- #size-cells = <1>;
- interrupt-parent = <&mpc5200_pic>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,5200@0 {
- device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <32>;
- i-cache-line-size = <32>;
- d-cache-size = <0x4000>; // L1, 16K
- i-cache-size = <0x4000>; // L1, 16K
- timebase-frequency = <0>; // from bootloader
- bus-frequency = <0>; // from bootloader
- clock-frequency = <0>; // from bootloader
- };
- };
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x04000000>; // 64MB
- };
soc5200@f0000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc5200b-immr";
- ranges = <0 0xf0000000 0x0000c000>;
- reg = <0xf0000000 0x00000100>;
- bus-frequency = <0>; // from bootloader
- system-frequency = <0>; // from bootloader
-
- cdm@200 {
- compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
- reg = <0x200 0x38>;
- };
-
- mpc5200_pic: interrupt-controller@500 {
- // 5200 interrupts are encoded into two levels;
- interrupt-controller;
- #interrupt-cells = <3>;
- compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
- reg = <0x500 0x80>;
- };
-
timer@600 { // General Purpose Timer
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x600 0x10>;
- interrupts = <1 9 0>;
fsl,has-wdt;
};
- timer@610 { // General Purpose Timer
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x610 0x10>;
- interrupts = <1 10 0>;
- };
-
- timer@620 { // General Purpose Timer
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x620 0x10>;
- interrupts = <1 11 0>;
- };
-
- timer@630 { // General Purpose Timer
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x630 0x10>;
- interrupts = <1 12 0>;
- };
-
- timer@640 { // General Purpose Timer
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x640 0x10>;
- interrupts = <1 13 0>;
- };
-
- timer@650 { // General Purpose Timer
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x650 0x10>;
- interrupts = <1 14 0>;
- };
-
- timer@660 { // General Purpose Timer
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x660 0x10>;
- interrupts = <1 15 0>;
- };
-
- timer@670 { // General Purpose Timer
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x670 0x10>;
- interrupts = <1 16 0>;
+ can@900 {
+ status = "disabled";
};
- rtc@800 { // Real time clock
- compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
- reg = <0x800 0x100>;
- interrupts = <1 5 0 1 6 0>;
+ can@980 {
+ status = "disabled";
};
- gpio_simple: gpio@b00 {
- compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
- reg = <0xb00 0x40>;
- interrupts = <1 7 0>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- gpio_wkup: gpio@c00 {
- compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
- reg = <0xc00 0x40>;
- interrupts = <1 8 0 0 3 0>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- spi@f00 {
- compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
- reg = <0xf00 0x20>;
- interrupts = <2 13 0 2 14 0>;
- };
-
- usb@1000 {
- compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
- reg = <0x1000 0xff>;
- interrupts = <2 6 0>;
- };
-
- dma-controller@1200 {
- compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
- reg = <0x1200 0x80>;
- interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
- 3 4 0 3 5 0 3 6 0 3 7 0
- 3 8 0 3 9 0 3 10 0 3 11 0
- 3 12 0 3 13 0 3 14 0 3 15 0>;
+ psc@2000 { // PSC1
+ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
};
- xlb@1f00 {
- compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
- reg = <0x1f00 0x100>;
+ psc@2200 { // PSC2
+ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
};
- serial@2000 { // PSC1
+ psc@2400 { // PSC3
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
- reg = <0x2000 0x100>;
- interrupts = <2 1 0>;
};
- serial@2200 { // PSC2
- compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
- reg = <0x2200 0x100>;
- interrupts = <2 2 0>;
+ psc@2600 { // PSC4
+ status = "disabled";
};
- serial@2400 { // PSC3
- compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
- reg = <0x2400 0x100>;
- interrupts = <2 3 0>;
+ psc@2800 { // PSC5
+ status = "disabled";
};
- serial@2c00 { // PSC6
+ psc@2c00 { // PSC6
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
- reg = <0x2c00 0x100>;
- interrupts = <2 4 0>;
};
ethernet@3000 {
- compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
- reg = <0x3000 0x400>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <2 5 0>;
phy-handle = <&phy0>;
};
mdio@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
- reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
- interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
-
phy0: ethernet-phy@0 {
reg = <0>;
};
};
- i2c@3d40 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
- reg = <0x3d40 0x40>;
- interrupts = <2 16 0>;
+ ata@3a00 {
+ status = "disabled";
};
- sram@8000 {
- compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
- reg = <0x8000 0x4000>;
+ i2c@3d00 {
+ status = "disabled";
};
+
};
- localbus {
- compatible = "fsl,mpc5200b-lpb","simple-bus";
- #address-cells = <2>;
- #size-cells = <1>;
- ranges = <0 0 0xfc000000 0x2000000>;
+ pci@f0000d00 {
+ status = "disabled";
+ };
+ localbus {
// 16-bit flash device at LocalPlus Bus CS0
flash@0,0 {
compatible = "cfi-flash";
diff --git a/arch/powerpc/boot/dts/digsy_mtc.dts b/arch/powerpc/boot/dts/digsy_mtc.dts
index 8e9be6bfe23..27bd267d631 100644
--- a/arch/powerpc/boot/dts/digsy_mtc.dts
+++ b/arch/powerpc/boot/dts/digsy_mtc.dts
@@ -11,195 +11,68 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "mpc5200b.dtsi"
/ {
model = "intercontrol,digsy-mtc";
compatible = "intercontrol,digsy-mtc";
- #address-cells = <1>;
- #size-cells = <1>;
- interrupt-parent = <&mpc5200_pic>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,5200@0 {
- device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <32>;
- i-cache-line-size = <32>;
- d-cache-size = <0x4000>; // L1, 16K
- i-cache-size = <0x4000>; // L1, 16K
- timebase-frequency = <0>; // from bootloader
- bus-frequency = <0>; // from bootloader
- clock-frequency = <0>; // from bootloader
- };
- };
memory {
- device_type = "memory";
reg = <0x00000000 0x02000000>; // 32MB
};
soc5200@f0000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc5200b-immr";
- ranges = <0 0xf0000000 0x0000c000>;
- reg = <0xf0000000 0x00000100>;
- bus-frequency = <0>; // from bootloader
- system-frequency = <0>; // from bootloader
-
- cdm@200 {
- compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
- reg = <0x200 0x38>;
- };
-
- mpc5200_pic: interrupt-controller@500 {
- // 5200 interrupts are encoded into two levels;
- interrupt-controller;
- #interrupt-cells = <3>;
- compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
- reg = <0x500 0x80>;
- };
-
timer@600 { // General Purpose Timer
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x600 0x10>;
- interrupts = <1 9 0>;
fsl,has-wdt;
};
- timer@610 { // General Purpose Timer
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x610 0x10>;
- interrupts = <1 10 0>;
- };
-
- timer@620 { // General Purpose Timer
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x620 0x10>;
- interrupts = <1 11 0>;
- };
-
- timer@630 { // General Purpose Timer
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x630 0x10>;
- interrupts = <1 12 0>;
- };
-
- timer@640 { // General Purpose Timer
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x640 0x10>;
- interrupts = <1 13 0>;
- };
-
- timer@650 { // General Purpose Timer
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x650 0x10>;
- interrupts = <1 14 0>;
+ rtc@800 {
+ status = "disabled";
};
- timer@660 { // General Purpose Timer
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x660 0x10>;
- interrupts = <1 15 0>;
+ can@900 {
+ status = "disabled";
};
- timer@670 { // General Purpose Timer
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x670 0x10>;
- interrupts = <1 16 0>;
+ can@980 {
+ status = "disabled";
};
- gpio_simple: gpio@b00 {
- compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
- reg = <0xb00 0x40>;
- interrupts = <1 7 0>;
- gpio-controller;
- #gpio-cells = <2>;
+ psc@2000 { // PSC1
+ status = "disabled";
};
- gpio_wkup: gpio@c00 {
- compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
- reg = <0xc00 0x40>;
- interrupts = <1 8 0 0 3 0>;
- gpio-controller;
- #gpio-cells = <2>;
+ psc@2200 { // PSC2
+ status = "disabled";
};
- spi@f00 {
- compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
- reg = <0xf00 0x20>;
- interrupts = <2 13 0 2 14 0>;
+ psc@2400 { // PSC3
+ status = "disabled";
};
- usb@1000 {
- compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
- reg = <0x1000 0xff>;
- interrupts = <2 6 0>;
- };
-
- dma-controller@1200 {
- compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
- reg = <0x1200 0x80>;
- interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
- 3 4 0 3 5 0 3 6 0 3 7 0
- 3 8 0 3 9 0 3 10 0 3 11 0
- 3 12 0 3 13 0 3 14 0 3 15 0>;
- };
-
- xlb@1f00 {
- compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
- reg = <0x1f00 0x100>;
+ psc@2600 { // PSC4
+ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
};
- serial@2600 { // PSC4
+ psc@2800 { // PSC5
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
- reg = <0x2600 0x100>;
- interrupts = <2 11 0>;
};
- serial@2800 { // PSC5
- compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
- reg = <0x2800 0x100>;
- interrupts = <2 12 0>;
+ psc@2c00 { // PSC6
+ status = "disabled";
};
ethernet@3000 {
- compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
- reg = <0x3000 0x400>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <2 5 0>;
phy-handle = <&phy0>;
};
mdio@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
- reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
- interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
-
phy0: ethernet-phy@0 {
reg = <0>;
};
};
- ata@3a00 {
- compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
- reg = <0x3a00 0x100>;
- interrupts = <2 7 0>;
- };
-
i2c@3d00 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
- reg = <0x3d00 0x40>;
- interrupts = <2 15 0>;
-
rtc@50 {
compatible = "at,24c08";
reg = <0x50>;
@@ -211,16 +84,16 @@
};
};
- sram@8000 {
- compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
- reg = <0x8000 0x4000>;
+ i2c@3d40 {
+ status = "disabled";
};
};
- lpb {
- compatible = "fsl,mpc5200b-lpb","simple-bus";
- #address-cells = <2>;
- #size-cells = <1>;
+ pci@f0000d00 {
+ status = "disabled";
+ };
+
+ localbus {
ranges = <0 0 0xff000000 0x1000000>;
// 16-bit flash device at LocalPlus Bus CS0
diff --git a/arch/powerpc/boot/dts/hotfoot.dts b/arch/powerpc/boot/dts/hotfoot.dts
index cad9c3840af..71d3bb4931d 100644
--- a/arch/powerpc/boot/dts/hotfoot.dts
+++ b/arch/powerpc/boot/dts/hotfoot.dts
@@ -117,6 +117,8 @@
};
IIC: i2c@ef600500 {
+ #address-cells = <1>;
+ #size-cells = <0>;
compatible = "ibm,iic-405ep", "ibm,iic";
reg = <0xef600500 0x00000011>;
interrupt-parent = <&UIC0>;
diff --git a/arch/powerpc/boot/dts/kilauea.dts b/arch/powerpc/boot/dts/kilauea.dts
index 083e68eeaca..89edb16649c 100644
--- a/arch/powerpc/boot/dts/kilauea.dts
+++ b/arch/powerpc/boot/dts/kilauea.dts
@@ -82,6 +82,15 @@
interrupt-parent = <&UIC0>;
};
+ CPM0: cpm {
+ compatible = "ibm,cpm";
+ dcr-access-method = "native";
+ dcr-reg = <0x0b0 0x003>;
+ unused-units = <0x00000000>;
+ idle-doze = <0x02000000>;
+ standby = <0xe3e74800>;
+ };
+
plb {
compatible = "ibm,plb-405ex", "ibm,plb4";
#address-cells = <1>;
diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts
index 59702ace900..fb288bb882b 100644
--- a/arch/powerpc/boot/dts/lite5200b.dts
+++ b/arch/powerpc/boot/dts/lite5200b.dts
@@ -10,256 +10,75 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "mpc5200b.dtsi"
/ {
model = "fsl,lite5200b";
compatible = "fsl,lite5200b";
- #address-cells = <1>;
- #size-cells = <1>;
- interrupt-parent = <&mpc5200_pic>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,5200@0 {
- device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <32>;
- i-cache-line-size = <32>;
- d-cache-size = <0x4000>; // L1, 16K
- i-cache-size = <0x4000>; // L1, 16K
- timebase-frequency = <0>; // from bootloader
- bus-frequency = <0>; // from bootloader
- clock-frequency = <0>; // from bootloader
- };
- };
memory {
- device_type = "memory";
reg = <0x00000000 0x10000000>; // 256MB
};
soc5200@f0000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc5200b-immr";
- ranges = <0 0xf0000000 0x0000c000>;
- reg = <0xf0000000 0x00000100>;
- bus-frequency = <0>; // from bootloader
- system-frequency = <0>; // from bootloader
-
- cdm@200 {
- compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
- reg = <0x200 0x38>;
- };
-
- mpc5200_pic: interrupt-controller@500 {
- // 5200 interrupts are encoded into two levels;
- interrupt-controller;
- #interrupt-cells = <3>;
- compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
- reg = <0x500 0x80>;
- };
-
timer@600 { // General Purpose Timer
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x600 0x10>;
- interrupts = <1 9 0>;
fsl,has-wdt;
};
- timer@610 { // General Purpose Timer
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x610 0x10>;
- interrupts = <1 10 0>;
- };
-
- timer@620 { // General Purpose Timer
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x620 0x10>;
- interrupts = <1 11 0>;
- };
-
- timer@630 { // General Purpose Timer
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x630 0x10>;
- interrupts = <1 12 0>;
- };
-
- timer@640 { // General Purpose Timer
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x640 0x10>;
- interrupts = <1 13 0>;
- };
-
- timer@650 { // General Purpose Timer
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x650 0x10>;
- interrupts = <1 14 0>;
- };
-
- timer@660 { // General Purpose Timer
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x660 0x10>;
- interrupts = <1 15 0>;
- };
-
- timer@670 { // General Purpose Timer
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x670 0x10>;
- interrupts = <1 16 0>;
- };
-
- rtc@800 { // Real time clock
- compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
- reg = <0x800 0x100>;
- interrupts = <1 5 0 1 6 0>;
- };
-
- can@900 {
- compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
- interrupts = <2 17 0>;
- reg = <0x900 0x80>;
- };
-
- can@980 {
- compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
- interrupts = <2 18 0>;
- reg = <0x980 0x80>;
- };
-
- gpio_simple: gpio@b00 {
- compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
- reg = <0xb00 0x40>;
- interrupts = <1 7 0>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- gpio_wkup: gpio@c00 {
- compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
- reg = <0xc00 0x40>;
- interrupts = <1 8 0 0 3 0>;
- gpio-controller;
- #gpio-cells = <2>;
+ psc@2000 { // PSC1
+ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+ cell-index = <0>;
};
- spi@f00 {
- compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
- reg = <0xf00 0x20>;
- interrupts = <2 13 0 2 14 0>;
+ psc@2200 { // PSC2
+ status = "disabled";
};
- usb@1000 {
- compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
- reg = <0x1000 0xff>;
- interrupts = <2 6 0>;
+ psc@2400 { // PSC3
+ status = "disabled";
};
- dma-controller@1200 {
- compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
- reg = <0x1200 0x80>;
- interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
- 3 4 0 3 5 0 3 6 0 3 7 0
- 3 8 0 3 9 0 3 10 0 3 11 0
- 3 12 0 3 13 0 3 14 0 3 15 0>;
+ psc@2600 { // PSC4
+ status = "disabled";
};
- xlb@1f00 {
- compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
- reg = <0x1f00 0x100>;
+ psc@2800 { // PSC5
+ status = "disabled";
};
- serial@2000 { // PSC1
- compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
- cell-index = <0>;
- reg = <0x2000 0x100>;
- interrupts = <2 1 0>;
+ psc@2c00 { // PSC6
+ status = "disabled";
};
// PSC2 in ac97 mode example
//ac97@2200 { // PSC2
// compatible = "fsl,mpc5200b-psc-ac97","fsl,mpc5200-psc-ac97";
// cell-index = <1>;
- // reg = <0x2200 0x100>;
- // interrupts = <2 2 0>;
//};
// PSC3 in CODEC mode example
//i2s@2400 { // PSC3
// compatible = "fsl,mpc5200b-psc-i2s"; //not 5200 compatible
// cell-index = <2>;
- // reg = <0x2400 0x100>;
- // interrupts = <2 3 0>;
- //};
-
- // PSC4 in uart mode example
- //serial@2600 { // PSC4
- // compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
- // cell-index = <3>;
- // reg = <0x2600 0x100>;
- // interrupts = <2 11 0>;
- //};
-
- // PSC5 in uart mode example
- //serial@2800 { // PSC5
- // compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
- // cell-index = <4>;
- // reg = <0x2800 0x100>;
- // interrupts = <2 12 0>;
//};
// PSC6 in spi mode example
//spi@2c00 { // PSC6
// compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi";
// cell-index = <5>;
- // reg = <0x2c00 0x100>;
- // interrupts = <2 4 0>;
//};
ethernet@3000 {
- compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
- reg = <0x3000 0x400>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <2 5 0>;
phy-handle = <&phy0>;
};
mdio@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
- reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
- interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
-
phy0: ethernet-phy@0 {
reg = <0>;
};
};
- ata@3a00 {
- compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
- reg = <0x3a00 0x100>;
- interrupts = <2 7 0>;
- };
-
- i2c@3d00 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
- reg = <0x3d00 0x40>;
- interrupts = <2 15 0>;
- };
-
i2c@3d40 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
- reg = <0x3d40 0x40>;
- interrupts = <2 16 0>;
-
eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
@@ -273,12 +92,6 @@
};
pci@f0000d00 {
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
- reg = <0xf0000d00 0x100>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
0xc000 0 0 2 &mpc5200_pic 1 1 3
@@ -298,11 +111,6 @@
};
localbus {
- compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
-
- #address-cells = <2>;
- #size-cells = <1>;
-
ranges = <0 0 0xfe000000 0x02000000>;
flash@0,0 {
diff --git a/arch/powerpc/boot/dts/media5200.dts b/arch/powerpc/boot/dts/media5200.dts
index 0c3902bc5b6..48d72f38e5e 100644
--- a/arch/powerpc/boot/dts/media5200.dts
+++ b/arch/powerpc/boot/dts/media5200.dts
@@ -11,14 +11,11 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "mpc5200b.dtsi"
/ {
model = "fsl,media5200";
compatible = "fsl,media5200";
- #address-cells = <1>;
- #size-cells = <1>;
- interrupt-parent = <&mpc5200_pic>;
aliases {
console = &console;
@@ -30,16 +27,7 @@
};
cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
PowerPC,5200@0 {
- device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <32>;
- i-cache-line-size = <32>;
- d-cache-size = <0x4000>; // L1, 16K
- i-cache-size = <0x4000>; // L1, 16K
timebase-frequency = <33000000>; // 33 MHz, these were configured by U-Boot
bus-frequency = <132000000>; // 132 MHz
clock-frequency = <396000000>; // 396 MHz
@@ -47,205 +35,57 @@
};
memory {
- device_type = "memory";
reg = <0x00000000 0x08000000>; // 128MB RAM
};
- soc@f0000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc5200b-immr";
- ranges = <0 0xf0000000 0x0000c000>;
- reg = <0xf0000000 0x00000100>;
+ soc5200@f0000000 {
bus-frequency = <132000000>;// 132 MHz
- system-frequency = <0>; // from bootloader
-
- cdm@200 {
- compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
- reg = <0x200 0x38>;
- };
-
- mpc5200_pic: interrupt-controller@500 {
- // 5200 interrupts are encoded into two levels;
- interrupt-controller;
- #interrupt-cells = <3>;
- compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
- reg = <0x500 0x80>;
- };
timer@600 { // General Purpose Timer
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x600 0x10>;
- interrupts = <1 9 0>;
fsl,has-wdt;
};
- timer@610 { // General Purpose Timer
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x610 0x10>;
- interrupts = <1 10 0>;
- };
-
- timer@620 { // General Purpose Timer
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x620 0x10>;
- interrupts = <1 11 0>;
- };
-
- timer@630 { // General Purpose Timer
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x630 0x10>;
- interrupts = <1 12 0>;
- };
-
- timer@640 { // General Purpose Timer
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x640 0x10>;
- interrupts = <1 13 0>;
- };
-
- timer@650 { // General Purpose Timer
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x650 0x10>;
- interrupts = <1 14 0>;
- };
-
- timer@660 { // General Purpose Timer
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x660 0x10>;
- interrupts = <1 15 0>;
- };
-
- timer@670 { // General Purpose Timer
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x670 0x10>;
- interrupts = <1 16 0>;
- };
-
- rtc@800 { // Real time clock
- compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
- reg = <0x800 0x100>;
- interrupts = <1 5 0 1 6 0>;
- };
-
- can@900 {
- compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
- interrupts = <2 17 0>;
- reg = <0x900 0x80>;
+ psc@2000 { // PSC1
+ status = "disabled";
};
- can@980 {
- compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
- interrupts = <2 18 0>;
- reg = <0x980 0x80>;
+ psc@2200 { // PSC2
+ status = "disabled";
};
- gpio_simple: gpio@b00 {
- compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
- reg = <0xb00 0x40>;
- interrupts = <1 7 0>;
- gpio-controller;
- #gpio-cells = <2>;
+ psc@2400 { // PSC3
+ status = "disabled";
};
- gpio_wkup: gpio@c00 {
- compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
- reg = <0xc00 0x40>;
- interrupts = <1 8 0 0 3 0>;
- gpio-controller;
- #gpio-cells = <2>;
+ psc@2600 { // PSC4
+ status = "disabled";
};
- spi@f00 {
- compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
- reg = <0xf00 0x20>;
- interrupts = <2 13 0 2 14 0>;
- };
-
- usb@1000 {
- compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
- reg = <0x1000 0x100>;
- interrupts = <2 6 0>;
- };
-
- dma-controller@1200 {
- compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
- reg = <0x1200 0x80>;
- interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
- 3 4 0 3 5 0 3 6 0 3 7 0
- 3 8 0 3 9 0 3 10 0 3 11 0
- 3 12 0 3 13 0 3 14 0 3 15 0>;
- };
-
- xlb@1f00 {
- compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
- reg = <0x1f00 0x100>;
+ psc@2800 { // PSC5
+ status = "disabled";
};
// PSC6 in uart mode
- console: serial@2c00 { // PSC6
+ console: psc@2c00 { // PSC6
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
- cell-index = <5>;
- port-number = <0>; // Logical port assignment
- reg = <0x2c00 0x100>;
- interrupts = <2 4 0>;
};
- eth0: ethernet@3000 {
- compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
- reg = <0x3000 0x400>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <2 5 0>;
+ ethernet@3000 {
phy-handle = <&phy0>;
};
mdio@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
- reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
- interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
-
phy0: ethernet-phy@0 {
reg = <0>;
};
};
- ata@3a00 {
- compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
- reg = <0x3a00 0x100>;
- interrupts = <2 7 0>;
- };
-
- i2c@3d00 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
- reg = <0x3d00 0x40>;
- interrupts = <2 15 0>;
- };
-
- i2c@3d40 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
- reg = <0x3d40 0x40>;
- interrupts = <2 16 0>;
- };
-
- sram@8000 {
- compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
- reg = <0x8000 0x4000>;
+ usb@1000 {
+ reg = <0x1000 0x100>;
};
};
pci@f0000d00 {
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
- reg = <0xf0000d00 0x100>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <0xc000 0 0 1 &media5200_fpga 0 2 // 1st slot
0xc000 0 0 2 &media5200_fpga 0 3
@@ -262,37 +102,29 @@
0xe000 0 0 1 &media5200_fpga 0 5 // CoralIP
>;
- clock-frequency = <0>; // From boot loader
- interrupts = <2 8 0 2 9 0 2 10 0>;
- interrupt-parent = <&mpc5200_pic>;
- bus-range = <0 0>;
ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
+ interrupt-parent = <&mpc5200_pic>;
};
localbus {
- compatible = "fsl,mpc5200b-lpb","simple-bus";
- #address-cells = <2>;
- #size-cells = <1>;
-
ranges = < 0 0 0xfc000000 0x02000000
1 0 0xfe000000 0x02000000
2 0 0xf0010000 0x00010000
3 0 0xf0020000 0x00010000 >;
-
flash@0,0 {
compatible = "amd,am29lv28ml", "cfi-flash";
- reg = <0 0x0 0x2000000>; // 32 MB
- bank-width = <4>; // Width in bytes of the flash bank
- device-width = <2>; // Two devices on each bank
+ reg = <0 0x0 0x2000000>; // 32 MB
+ bank-width = <4>; // Width in bytes of the flash bank
+ device-width = <2>; // Two devices on each bank
};
flash@1,0 {
compatible = "amd,am29lv28ml", "cfi-flash";
- reg = <1 0 0x2000000>; // 32 MB
- bank-width = <4>; // Width in bytes of the flash bank
- device-width = <2>; // Two devices on each bank
+ reg = <1 0 0x2000000>; // 32 MB
+ bank-width = <4>; // Width in bytes of the flash bank
+ device-width = <2>; // Two devices on each bank
};
media5200_fpga: fpga@2,0 {
diff --git a/arch/powerpc/boot/dts/motionpro.dts b/arch/powerpc/boot/dts/motionpro.dts
index 6ca4fc144a3..0b78e89ac69 100644
--- a/arch/powerpc/boot/dts/motionpro.dts
+++ b/arch/powerpc/boot/dts/motionpro.dts
@@ -10,219 +10,73 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "mpc5200b.dtsi"
/ {
model = "promess,motionpro";
compatible = "promess,motionpro";
- #address-cells = <1>;
- #size-cells = <1>;
- interrupt-parent = <&mpc5200_pic>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,5200@0 {
- device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <32>;
- i-cache-line-size = <32>;
- d-cache-size = <0x4000>; // L1, 16K
- i-cache-size = <0x4000>; // L1, 16K
- timebase-frequency = <0>; // from bootloader
- bus-frequency = <0>; // from bootloader
- clock-frequency = <0>; // from bootloader
- };
- };
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x04000000>; // 64MB
- };
soc5200@f0000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc5200b-immr";
- ranges = <0 0xf0000000 0x0000c000>;
- reg = <0xf0000000 0x00000100>;
- bus-frequency = <0>; // from bootloader
- system-frequency = <0>; // from bootloader
-
- cdm@200 {
- compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
- reg = <0x200 0x38>;
- };
-
- mpc5200_pic: interrupt-controller@500 {
- // 5200 interrupts are encoded into two levels;
- interrupt-controller;
- #interrupt-cells = <3>;
- compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
- reg = <0x500 0x80>;
- };
-
timer@600 { // General Purpose Timer
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x600 0x10>;
- interrupts = <1 9 0>;
fsl,has-wdt;
};
- timer@610 { // General Purpose Timer
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x610 0x10>;
- interrupts = <1 10 0>;
- };
-
- timer@620 { // General Purpose Timer
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x620 0x10>;
- interrupts = <1 11 0>;
- };
-
- timer@630 { // General Purpose Timer
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x630 0x10>;
- interrupts = <1 12 0>;
- };
-
- timer@640 { // General Purpose Timer
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x640 0x10>;
- interrupts = <1 13 0>;
- };
-
- timer@650 { // General Purpose Timer
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x650 0x10>;
- interrupts = <1 14 0>;
- };
-
- motionpro-led@660 { // Motion-PRO status LED
+ timer@660 { // Motion-PRO status LED
compatible = "promess,motionpro-led";
label = "motionpro-statusled";
- reg = <0x660 0x10>;
- interrupts = <1 15 0>;
blink-delay = <100>; // 100 msec
};
- motionpro-led@670 { // Motion-PRO ready LED
+ timer@670 { // Motion-PRO ready LED
compatible = "promess,motionpro-led";
label = "motionpro-readyled";
- reg = <0x670 0x10>;
- interrupts = <1 16 0>;
- };
-
- rtc@800 { // Real time clock
- compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
- reg = <0x800 0x100>;
- interrupts = <1 5 0 1 6 0>;
- };
-
- can@980 {
- compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
- interrupts = <2 18 0>;
- reg = <0x980 0x80>;
};
- gpio_simple: gpio@b00 {
- compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
- reg = <0xb00 0x40>;
- interrupts = <1 7 0>;
- gpio-controller;
- #gpio-cells = <2>;
+ can@900 {
+ status = "disabled";
};
- gpio_wkup: gpio@c00 {
- compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
- reg = <0xc00 0x40>;
- interrupts = <1 8 0 0 3 0>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- spi@f00 {
- compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
- reg = <0xf00 0x20>;
- interrupts = <2 13 0 2 14 0>;
+ psc@2000 { // PSC1
+ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
};
- usb@1000 {
- compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
- reg = <0x1000 0xff>;
- interrupts = <2 6 0>;
+ // PSC2 in spi master mode
+ psc@2200 { // PSC2
+ compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi";
+ cell-index = <1>;
};
- dma-controller@1200 {
- compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
- reg = <0x1200 0x80>;
- interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
- 3 4 0 3 5 0 3 6 0 3 7 0
- 3 8 0 3 9 0 3 10 0 3 11 0
- 3 12 0 3 13 0 3 14 0 3 15 0>;
+ psc@2400 { // PSC3
+ status = "disabled";
};
- xlb@1f00 {
- compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
- reg = <0x1f00 0x100>;
+ psc@2600 { // PSC4
+ status = "disabled";
};
- serial@2000 { // PSC1
+ psc@2800 { // PSC5
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
- reg = <0x2000 0x100>;
- interrupts = <2 1 0>;
- };
-
- // PSC2 in spi master mode
- spi@2200 { // PSC2
- compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi";
- cell-index = <1>;
- reg = <0x2200 0x100>;
- interrupts = <2 2 0>;
};
- // PSC5 in uart mode
- serial@2800 { // PSC5
- compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
- reg = <0x2800 0x100>;
- interrupts = <2 12 0>;
+ psc@2c00 { // PSC6
+ status = "disabled";
};
ethernet@3000 {
- compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
- reg = <0x3000 0x400>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <2 5 0>;
phy-handle = <&phy0>;
};
mdio@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
- reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
- interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
-
phy0: ethernet-phy@2 {
reg = <2>;
};
};
- ata@3a00 {
- compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
- reg = <0x3a00 0x100>;
- interrupts = <2 7 0>;
+ i2c@3d00 {
+ status = "disabled";
};
i2c@3d40 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
- reg = <0x3d40 0x40>;
- interrupts = <2 16 0>;
-
rtc@68 {
compatible = "dallas,ds1339";
reg = <0x68>;
@@ -235,10 +89,11 @@
};
};
+ pci@f0000d00 {
+ status = "disabled";
+ };
+
localbus {
- compatible = "fsl,mpc5200b-lpb","simple-bus";
- #address-cells = <2>;
- #size-cells = <1>;
ranges = <0 0 0xff000000 0x01000000
1 0 0x50000000 0x00010000
2 0 0x50010000 0x00010000
@@ -280,5 +135,6 @@
#size-cells = <1>;
#address-cells = <1>;
};
+
};
};
diff --git a/arch/powerpc/boot/dts/mpc5200b.dtsi b/arch/powerpc/boot/dts/mpc5200b.dtsi
new file mode 100644
index 00000000000..bc27548e895
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc5200b.dtsi
@@ -0,0 +1,275 @@
+/*
+ * base MPC5200b Device Tree Source
+ *
+ * Copyright (C) 2010 SecretLab
+ * Grant Likely <grant@secretlab.ca>
+ * John Bonesio <bones@secretlab.ca>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+ model = "fsl,mpc5200b";
+ compatible = "fsl,mpc5200b";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&mpc5200_pic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ powerpc: PowerPC,5200@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ d-cache-size = <0x4000>; // L1, 16K
+ i-cache-size = <0x4000>; // L1, 16K
+ timebase-frequency = <0>; // from bootloader
+ bus-frequency = <0>; // from bootloader
+ clock-frequency = <0>; // from bootloader
+ };
+ };
+
+ memory: memory {
+ device_type = "memory";
+ reg = <0x00000000 0x04000000>; // 64MB
+ };
+
+ soc: soc5200@f0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc5200b-immr";
+ ranges = <0 0xf0000000 0x0000c000>;
+ reg = <0xf0000000 0x00000100>;
+ bus-frequency = <0>; // from bootloader
+ system-frequency = <0>; // from bootloader
+
+ cdm@200 {
+ compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
+ reg = <0x200 0x38>;
+ };
+
+ mpc5200_pic: interrupt-controller@500 {
+ // 5200 interrupts are encoded into two levels;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
+ reg = <0x500 0x80>;
+ };
+
+ timer@600 { // General Purpose Timer
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x600 0x10>;
+ interrupts = <1 9 0>;
+ };
+
+ timer@610 { // General Purpose Timer
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x610 0x10>;
+ interrupts = <1 10 0>;
+ };
+
+ timer@620 { // General Purpose Timer
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x620 0x10>;
+ interrupts = <1 11 0>;
+ };
+
+ timer@630 { // General Purpose Timer
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x630 0x10>;
+ interrupts = <1 12 0>;
+ };
+
+ timer@640 { // General Purpose Timer
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x640 0x10>;
+ interrupts = <1 13 0>;
+ };
+
+ timer@650 { // General Purpose Timer
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x650 0x10>;
+ interrupts = <1 14 0>;
+ };
+
+ timer@660 { // General Purpose Timer
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x660 0x10>;
+ interrupts = <1 15 0>;
+ };
+
+ timer@670 { // General Purpose Timer
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x670 0x10>;
+ interrupts = <1 16 0>;
+ };
+
+ rtc@800 { // Real time clock
+ compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
+ reg = <0x800 0x100>;
+ interrupts = <1 5 0 1 6 0>;
+ };
+
+ can@900 {
+ compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
+ interrupts = <2 17 0>;
+ reg = <0x900 0x80>;
+ };
+
+ can@980 {
+ compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
+ interrupts = <2 18 0>;
+ reg = <0x980 0x80>;
+ };
+
+ gpio_simple: gpio@b00 {
+ compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
+ reg = <0xb00 0x40>;
+ interrupts = <1 7 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio_wkup: gpio@c00 {
+ compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
+ reg = <0xc00 0x40>;
+ interrupts = <1 8 0 0 3 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ spi@f00 {
+ compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
+ reg = <0xf00 0x20>;
+ interrupts = <2 13 0 2 14 0>;
+ };
+
+ usb: usb@1000 {
+ compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
+ reg = <0x1000 0xff>;
+ interrupts = <2 6 0>;
+ };
+
+ dma-controller@1200 {
+ compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
+ reg = <0x1200 0x80>;
+ interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
+ 3 4 0 3 5 0 3 6 0 3 7 0
+ 3 8 0 3 9 0 3 10 0 3 11 0
+ 3 12 0 3 13 0 3 14 0 3 15 0>;
+ };
+
+ xlb@1f00 {
+ compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
+ reg = <0x1f00 0x100>;
+ };
+
+ psc1: psc@2000 { // PSC1
+ compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
+ reg = <0x2000 0x100>;
+ interrupts = <2 1 0>;
+ };
+
+ psc2: psc@2200 { // PSC2
+ compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
+ reg = <0x2200 0x100>;
+ interrupts = <2 2 0>;
+ };
+
+ psc3: psc@2400 { // PSC3
+ compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
+ reg = <0x2400 0x100>;
+ interrupts = <2 3 0>;
+ };
+
+ psc4: psc@2600 { // PSC4
+ compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
+ reg = <0x2600 0x100>;
+ interrupts = <2 11 0>;
+ };
+
+ psc5: psc@2800 { // PSC5
+ compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
+ reg = <0x2800 0x100>;
+ interrupts = <2 12 0>;
+ };
+
+ psc6: psc@2c00 { // PSC6
+ compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
+ reg = <0x2c00 0x100>;
+ interrupts = <2 4 0>;
+ };
+
+ eth0: ethernet@3000 {
+ compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
+ reg = <0x3000 0x400>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <2 5 0>;
+ };
+
+ mdio@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
+ reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
+ interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
+ };
+
+ ata@3a00 {
+ compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
+ reg = <0x3a00 0x100>;
+ interrupts = <2 7 0>;
+ };
+
+ i2c@3d00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
+ reg = <0x3d00 0x40>;
+ interrupts = <2 15 0>;
+ };
+
+ i2c@3d40 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
+ reg = <0x3d40 0x40>;
+ interrupts = <2 16 0>;
+ };
+
+ sram@8000 {
+ compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
+ reg = <0x8000 0x4000>;
+ };
+ };
+
+ pci: pci@f0000d00 {
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
+ reg = <0xf0000d00 0x100>;
+ // interrupt-map-mask = need to add
+ // interrupt-map = need to add
+ clock-frequency = <0>; // From boot loader
+ interrupts = <2 8 0 2 9 0 2 10 0>;
+ bus-range = <0 0>;
+ // ranges = need to add
+ };
+
+ localbus: localbus {
+ compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0xfc000000 0x2000000>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/mpc8308_p1m.dts b/arch/powerpc/boot/dts/mpc8308_p1m.dts
index 05a76ccfd49..697b3f6b78b 100644
--- a/arch/powerpc/boot/dts/mpc8308_p1m.dts
+++ b/arch/powerpc/boot/dts/mpc8308_p1m.dts
@@ -297,6 +297,14 @@
interrupt-parent = < &ipic >;
};
+ dma@2c000 {
+ compatible = "fsl,mpc8308-dma", "fsl,mpc5121-dma";
+ reg = <0x2c000 0x1800>;
+ interrupts = <3 0x8
+ 94 0x8>;
+ interrupt-parent = < &ipic >;
+ };
+
};
pci0: pcie@e0009000 {
diff --git a/arch/powerpc/boot/dts/mpc8308rdb.dts b/arch/powerpc/boot/dts/mpc8308rdb.dts
index a97eb2db5a1..d3db02f98dd 100644
--- a/arch/powerpc/boot/dts/mpc8308rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8308rdb.dts
@@ -265,6 +265,14 @@
interrupt-parent = < &ipic >;
};
+ dma@2c000 {
+ compatible = "fsl,mpc8308-dma", "fsl,mpc5121-dma";
+ reg = <0x2c000 0x1800>;
+ interrupts = <3 0x8
+ 94 0x8>;
+ interrupt-parent = < &ipic >;
+ };
+
};
pci0: pcie@e0009000 {
diff --git a/arch/powerpc/boot/dts/mucmc52.dts b/arch/powerpc/boot/dts/mucmc52.dts
index b72a7581d79..21d34720fcc 100644
--- a/arch/powerpc/boot/dts/mucmc52.dts
+++ b/arch/powerpc/boot/dts/mucmc52.dts
@@ -11,172 +11,109 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "mpc5200b.dtsi"
/ {
model = "manroland,mucmc52";
compatible = "manroland,mucmc52";
- #address-cells = <1>;
- #size-cells = <1>;
- interrupt-parent = <&mpc5200_pic>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,5200@0 {
- device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <32>;
- i-cache-line-size = <32>;
- d-cache-size = <0x4000>; // L1, 16K
- i-cache-size = <0x4000>; // L1, 16K
- timebase-frequency = <0>; // from bootloader
- bus-frequency = <0>; // from bootloader
- clock-frequency = <0>; // from bootloader
- };
- };
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x04000000>; // 64MB
- };
soc5200@f0000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc5200b-immr";
- ranges = <0 0xf0000000 0x0000c000>;
- reg = <0xf0000000 0x00000100>;
- bus-frequency = <0>; // from bootloader
- system-frequency = <0>; // from bootloader
-
- cdm@200 {
- compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
- reg = <0x200 0x38>;
- };
-
- mpc5200_pic: interrupt-controller@500 {
- // 5200 interrupts are encoded into two levels;
- interrupt-controller;
- #interrupt-cells = <3>;
- compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
- reg = <0x500 0x80>;
- };
-
gpt0: timer@600 { // GPT 0 in GPIO mode
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x600 0x10>;
- interrupts = <1 9 0>;
gpio-controller;
#gpio-cells = <2>;
};
gpt1: timer@610 { // General Purpose Timer in GPIO mode
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x610 0x10>;
- interrupts = <1 10 0>;
gpio-controller;
#gpio-cells = <2>;
};
gpt2: timer@620 { // General Purpose Timer in GPIO mode
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x620 0x10>;
- interrupts = <1 11 0>;
gpio-controller;
#gpio-cells = <2>;
};
gpt3: timer@630 { // General Purpose Timer in GPIO mode
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x630 0x10>;
- interrupts = <1 12 0>;
gpio-controller;
#gpio-cells = <2>;
};
- gpio_simple: gpio@b00 {
- compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
- reg = <0xb00 0x40>;
- interrupts = <1 7 0>;
- gpio-controller;
- #gpio-cells = <2>;
+ timer@640 {
+ status = "disabled";
};
- gpio_wkup: gpio@c00 {
- compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
- reg = <0xc00 0x40>;
- interrupts = <1 8 0 0 3 0>;
- gpio-controller;
- #gpio-cells = <2>;
+ timer@650 {
+ status = "disabled";
+ };
+
+ timer@660 {
+ status = "disabled";
+ };
+
+ timer@670 {
+ status = "disabled";
};
- dma-controller@1200 {
- compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
- reg = <0x1200 0x80>;
- interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
- 3 4 0 3 5 0 3 6 0 3 7 0
- 3 8 0 3 9 0 3 10 0 3 11 0
- 3 12 0 3 13 0 3 14 0 3 15 0>;
+ rtc@800 {
+ status = "disabled";
};
- xlb@1f00 {
- compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
- reg = <0x1f00 0x100>;
+ can@900 {
+ status = "disabled";
};
- serial@2000 { /* PSC1 in UART mode */
+ can@980 {
+ status = "disabled";
+ };
+
+ spi@f00 {
+ status = "disabled";
+ };
+
+ usb@1000 {
+ status = "disabled";
+ };
+
+ psc@2000 { // PSC1
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
- reg = <0x2000 0x100>;
- interrupts = <2 1 0>;
};
- serial@2200 { /* PSC2 in UART mode */
+ psc@2200 { // PSC2
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
- reg = <0x2200 0x100>;
- interrupts = <2 2 0>;
};
- serial@2c00 { /* PSC6 in UART mode */
+ psc@2400 { // PSC3
+ status = "disabled";
+ };
+
+ psc@2600 { // PSC4
+ status = "disabled";
+ };
+
+ psc@2800 { // PSC5
+ status = "disabled";
+ };
+
+ psc@2c00 { // PSC6
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
- reg = <0x2c00 0x100>;
- interrupts = <2 4 0>;
};
ethernet@3000 {
- compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
- reg = <0x3000 0x400>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <2 5 0>;
phy-handle = <&phy0>;
};
mdio@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
- reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
- interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
-
phy0: ethernet-phy@0 {
compatible = "intel,lxt971";
reg = <0>;
};
};
- ata@3a00 {
- compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
- reg = <0x3a00 0x100>;
- interrupts = <2 7 0>;
+ i2c@3d00 {
+ status = "disabled";
};
i2c@3d40 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
- reg = <0x3d40 0x40>;
- interrupts = <2 16 0>;
hwmon@2c {
compatible = "ad,adm9240";
reg = <0x2c>;
@@ -186,20 +123,9 @@
reg = <0x51>;
};
};
-
- sram@8000 {
- compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
- reg = <0x8000 0x4000>;
- };
};
pci@f0000d00 {
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
- reg = <0xf0000d00 0x100>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x10 */
@@ -208,20 +134,12 @@
0x8000 0 0 3 &mpc5200_pic 0 2 3
0x8000 0 0 4 &mpc5200_pic 0 1 3
>;
- clock-frequency = <0>; // From boot loader
- interrupts = <2 8 0 2 9 0 2 10 0>;
- bus-range = <0 0>;
ranges = <0x42000000 0 0x60000000 0x60000000 0 0x10000000
0x02000000 0 0x90000000 0x90000000 0 0x10000000
0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
};
localbus {
- compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
-
- #address-cells = <2>;
- #size-cells = <1>;
-
ranges = <0 0 0xff800000 0x00800000
1 0 0x80000000 0x00800000
3 0 0x80000000 0x00800000>;
diff --git a/arch/powerpc/boot/dts/pcm030.dts b/arch/powerpc/boot/dts/pcm030.dts
index 8a4ec30b21a..9e354997eb7 100644
--- a/arch/powerpc/boot/dts/pcm030.dts
+++ b/arch/powerpc/boot/dts/pcm030.dts
@@ -12,246 +12,92 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "mpc5200b.dtsi"
/ {
model = "phytec,pcm030";
compatible = "phytec,pcm030";
- #address-cells = <1>;
- #size-cells = <1>;
- interrupt-parent = <&mpc5200_pic>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,5200@0 {
- device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <32>;
- i-cache-line-size = <32>;
- d-cache-size = <0x4000>; // L1, 16K
- i-cache-size = <0x4000>; // L1, 16K
- timebase-frequency = <0>; // from bootloader
- bus-frequency = <0>; // from bootloader
- clock-frequency = <0>; // from bootloader
- };
- };
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x04000000>; // 64MB
- };
soc5200@f0000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc5200b-immr";
- ranges = <0 0xf0000000 0x0000c000>;
- bus-frequency = <0>; // from bootloader
- system-frequency = <0>; // from bootloader
-
- cdm@200 {
- compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
- reg = <0x200 0x38>;
- };
-
- mpc5200_pic: interrupt-controller@500 {
- // 5200 interrupts are encoded into two levels;
- interrupt-controller;
- #interrupt-cells = <3>;
- compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
- reg = <0x500 0x80>;
- };
-
- timer@600 { // General Purpose Timer
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x600 0x10>;
- interrupts = <1 9 0>;
+ timer@600 { // General Purpose Timer
fsl,has-wdt;
};
- timer@610 { // General Purpose Timer
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x610 0x10>;
- interrupts = <1 10 0>;
- };
-
gpt2: timer@620 { // General Purpose Timer in GPIO mode
compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
- reg = <0x620 0x10>;
- interrupts = <1 11 0>;
gpio-controller;
#gpio-cells = <2>;
};
gpt3: timer@630 { // General Purpose Timer in GPIO mode
compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
- reg = <0x630 0x10>;
- interrupts = <1 12 0>;
gpio-controller;
#gpio-cells = <2>;
};
gpt4: timer@640 { // General Purpose Timer in GPIO mode
compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
- reg = <0x640 0x10>;
- interrupts = <1 13 0>;
gpio-controller;
#gpio-cells = <2>;
};
gpt5: timer@650 { // General Purpose Timer in GPIO mode
compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
- reg = <0x650 0x10>;
- interrupts = <1 14 0>;
gpio-controller;
#gpio-cells = <2>;
};
gpt6: timer@660 { // General Purpose Timer in GPIO mode
compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
- reg = <0x660 0x10>;
- interrupts = <1 15 0>;
gpio-controller;
#gpio-cells = <2>;
};
gpt7: timer@670 { // General Purpose Timer in GPIO mode
compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
- reg = <0x670 0x10>;
- interrupts = <1 16 0>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- rtc@800 { // Real time clock
- compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
- reg = <0x800 0x100>;
- interrupts = <1 5 0 1 6 0>;
- };
-
- can@900 {
- compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
- interrupts = <2 17 0>;
- reg = <0x900 0x80>;
- };
-
- can@980 {
- compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
- interrupts = <2 18 0>;
- reg = <0x980 0x80>;
- };
-
- gpio_simple: gpio@b00 {
- compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
- reg = <0xb00 0x40>;
- interrupts = <1 7 0>;
gpio-controller;
#gpio-cells = <2>;
};
- gpio_wkup: gpio@c00 {
- compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
- reg = <0xc00 0x40>;
- interrupts = <1 8 0 0 3 0>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- spi@f00 {
- compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
- reg = <0xf00 0x20>;
- interrupts = <2 13 0 2 14 0>;
- };
-
- usb@1000 {
- compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
- reg = <0x1000 0xff>;
- interrupts = <2 6 0>;
- };
-
- dma-controller@1200 {
- compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
- reg = <0x1200 0x80>;
- interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
- 3 4 0 3 5 0 3 6 0 3 7 0
- 3 8 0 3 9 0 3 10 0 3 11 0
- 3 12 0 3 13 0 3 14 0 3 15 0>;
- };
-
- xlb@1f00 {
- compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
- reg = <0x1f00 0x100>;
- };
-
- ac97@2000 { /* PSC1 in ac97 mode */
+ psc@2000 { /* PSC1 in ac97 mode */
compatible = "mpc5200b-psc-ac97","fsl,mpc5200b-psc-ac97";
cell-index = <0>;
- reg = <0x2000 0x100>;
- interrupts = <2 1 0>;
};
/* PSC2 port is used by CAN1/2 */
+ psc@2200 {
+ status = "disabled";
+ };
- serial@2400 { /* PSC3 in UART mode */
+ psc@2400 { /* PSC3 in UART mode */
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
- cell-index = <2>;
- reg = <0x2400 0x100>;
- interrupts = <2 3 0>;
};
/* PSC4 is ??? */
+ psc@2600 {
+ status = "disabled";
+ };
/* PSC5 is ??? */
+ psc@2800 {
+ status = "disabled";
+ };
- serial@2c00 { /* PSC6 in UART mode */
+ psc@2c00 { /* PSC6 in UART mode */
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
- cell-index = <5>;
- reg = <0x2c00 0x100>;
- interrupts = <2 4 0>;
};
ethernet@3000 {
- compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
- reg = <0x3000 0x400>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <2 5 0>;
phy-handle = <&phy0>;
};
mdio@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
- reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
- interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
-
phy0: ethernet-phy@0 {
reg = <0>;
};
};
- ata@3a00 {
- compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
- reg = <0x3a00 0x100>;
- interrupts = <2 7 0>;
- };
-
- i2c@3d00 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
- reg = <0x3d00 0x40>;
- interrupts = <2 15 0>;
- };
-
i2c@3d40 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
- reg = <0x3d40 0x40>;
- interrupts = <2 16 0>;
rtc@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
@@ -259,6 +105,7 @@
eeprom@52 {
compatible = "catalyst,24c32";
reg = <0x52>;
+ pagesize = <32>;
};
};
@@ -269,12 +116,6 @@
};
pci@f0000d00 {
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
- reg = <0xf0000d00 0x100>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
0xc000 0 0 2 &mpc5200_pic 1 1 3
@@ -285,11 +126,12 @@
0xc800 0 0 2 &mpc5200_pic 1 2 3
0xc800 0 0 3 &mpc5200_pic 1 3 3
0xc800 0 0 4 &mpc5200_pic 0 0 3>;
- clock-frequency = <0>; // From boot loader
- interrupts = <2 8 0 2 9 0 2 10 0>;
- bus-range = <0 0>;
ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
};
+
+ localbus {
+ status = "disabled";
+ };
};
diff --git a/arch/powerpc/boot/dts/pcm032.dts b/arch/powerpc/boot/dts/pcm032.dts
index 85d857a5d46..1dd478bfff9 100644
--- a/arch/powerpc/boot/dts/pcm032.dts
+++ b/arch/powerpc/boot/dts/pcm032.dts
@@ -12,99 +12,37 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "mpc5200b.dtsi"
/ {
model = "phytec,pcm032";
compatible = "phytec,pcm032";
- #address-cells = <1>;
- #size-cells = <1>;
- interrupt-parent = <&mpc5200_pic>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,5200@0 {
- device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <32>;
- i-cache-line-size = <32>;
- d-cache-size = <0x4000>; // L1, 16K
- i-cache-size = <0x4000>; // L1, 16K
- timebase-frequency = <0>; // from bootloader
- bus-frequency = <0>; // from bootloader
- clock-frequency = <0>; // from bootloader
- };
- };
memory {
- device_type = "memory";
reg = <0x00000000 0x08000000>; // 128MB
};
soc5200@f0000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc5200b-immr";
- ranges = <0 0xf0000000 0x0000c000>;
- bus-frequency = <0>; // from bootloader
- system-frequency = <0>; // from bootloader
-
- cdm@200 {
- compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
- reg = <0x200 0x38>;
- };
-
- mpc5200_pic: interrupt-controller@500 {
- // 5200 interrupts are encoded into two levels;
- interrupt-controller;
- #interrupt-cells = <3>;
- compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
- reg = <0x500 0x80>;
- };
-
- timer@600 { // General Purpose Timer
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x600 0x10>;
- interrupts = <1 9 0>;
+ timer@600 { // General Purpose Timer
fsl,has-wdt;
};
- timer@610 { // General Purpose Timer
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x610 0x10>;
- interrupts = <1 10 0>;
- };
-
gpt2: timer@620 { // General Purpose Timer in GPIO mode
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x620 0x10>;
- interrupts = <1 11 0>;
gpio-controller;
#gpio-cells = <2>;
};
gpt3: timer@630 { // General Purpose Timer in GPIO mode
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x630 0x10>;
- interrupts = <1 12 0>;
gpio-controller;
#gpio-cells = <2>;
};
gpt4: timer@640 { // General Purpose Timer in GPIO mode
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x640 0x10>;
- interrupts = <1 13 0>;
gpio-controller;
#gpio-cells = <2>;
};
gpt5: timer@650 { // General Purpose Timer in GPIO mode
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x650 0x10>;
- interrupts = <1 14 0>;
gpio-controller;
#gpio-cells = <2>;
};
@@ -118,163 +56,62 @@
};
gpt7: timer@670 { // General Purpose Timer in GPIO mode
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x670 0x10>;
- interrupts = <1 16 0>;
gpio-controller;
#gpio-cells = <2>;
};
- rtc@800 { // Real time clock
- compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
- reg = <0x800 0x100>;
- interrupts = <1 5 0 1 6 0>;
- };
-
- can@900 {
- compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
- interrupts = <2 17 0>;
- reg = <0x900 0x80>;
- };
-
- can@980 {
- compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
- interrupts = <2 18 0>;
- reg = <0x980 0x80>;
- };
-
- gpio_simple: gpio@b00 {
- compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
- reg = <0xb00 0x40>;
- interrupts = <1 7 0>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- gpio_wkup: gpio@c00 {
- compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
- reg = <0xc00 0x40>;
- interrupts = <1 8 0 0 3 0>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- spi@f00 {
- compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
- reg = <0xf00 0x20>;
- interrupts = <2 13 0 2 14 0>;
- };
-
- usb@1000 {
- compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
- reg = <0x1000 0xff>;
- interrupts = <2 6 0>;
- };
-
- dma-controller@1200 {
- compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
- reg = <0x1200 0x80>;
- interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
- 3 4 0 3 5 0 3 6 0 3 7 0
- 3 8 0 3 9 0 3 10 0 3 11 0
- 3 12 0 3 13 0 3 14 0 3 15 0>;
- };
-
- xlb@1f00 {
- compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
- reg = <0x1f00 0x100>;
- };
-
- ac97@2000 { /* PSC1 is ac97 */
+ psc@2000 { /* PSC1 is ac97 */
compatible = "fsl,mpc5200b-psc-ac97","fsl,mpc5200-psc-ac97";
cell-index = <0>;
- reg = <0x2000 0x100>;
- interrupts = <2 1 0>;
};
/* PSC2 port is used by CAN1/2 */
+ psc@2200 {
+ status = "disabled";
+ };
- serial@2400 { /* PSC3 in UART mode */
+ psc@2400 { /* PSC3 in UART mode */
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
- cell-index = <2>;
- reg = <0x2400 0x100>;
- interrupts = <2 3 0>;
};
/* PSC4 is ??? */
+ psc@2600 {
+ status = "disabled";
+ };
/* PSC5 is ??? */
+ psc@2800 {
+ status = "disabled";
+ };
- serial@2c00 { /* PSC6 in UART mode */
+ psc@2c00 { /* PSC6 in UART mode */
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
- cell-index = <5>;
- reg = <0x2c00 0x100>;
- interrupts = <2 4 0>;
};
ethernet@3000 {
- compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
- reg = <0x3000 0x400>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <2 5 0>;
phy-handle = <&phy0>;
};
mdio@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
- reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
- interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
-
phy0: ethernet-phy@0 {
reg = <0>;
};
};
- ata@3a00 {
- compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
- reg = <0x3a00 0x100>;
- interrupts = <2 7 0>;
- };
-
- i2c@3d00 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
- reg = <0x3d00 0x40>;
- interrupts = <2 15 0>;
- };
-
i2c@3d40 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
- reg = <0x3d40 0x40>;
- interrupts = <2 16 0>;
rtc@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
};
eeprom@52 {
- compatible = "at24,24c32";
+ compatible = "catalyst,24c32";
reg = <0x52>;
+ pagesize = <32>;
};
};
-
- sram@8000 {
- compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
- reg = <0x8000 0x4000>;
- };
};
pci@f0000d00 {
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
- reg = <0xf0000d00 0x100>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
0xc000 0 0 2 &mpc5200_pic 1 1 3
@@ -285,20 +122,12 @@
0xc800 0 0 2 &mpc5200_pic 1 2 3
0xc800 0 0 3 &mpc5200_pic 1 3 3
0xc800 0 0 4 &mpc5200_pic 0 0 3>;
- clock-frequency = <0>; // From boot loader
- interrupts = <2 8 0 2 9 0 2 10 0>;
- bus-range = <0 0>;
ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
};
localbus {
- compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
-
- #address-cells = <2>;
- #size-cells = <1>;
-
ranges = <0 0 0xfe000000 0x02000000
1 0 0xfc000000 0x02000000
2 0 0xfbe00000 0x00200000
@@ -351,40 +180,39 @@
bank-width = <2>;
};
- /*
+ /*
* example snippets for FPGA
*
* fpga@3,0 {
- * compatible = "fpga_driver";
- * reg = <3 0 0x02000000>;
- * bank-width = <4>;
+ * compatible = "fpga_driver";
+ * reg = <3 0 0x02000000>;
+ * bank-width = <4>;
* };
*
* fpga@4,0 {
- * compatible = "fpga_driver";
- * reg = <4 0 0x02000000>;
- * bank-width = <4>;
+ * compatible = "fpga_driver";
+ * reg = <4 0 0x02000000>;
+ * bank-width = <4>;
* };
- */
+ */
- /*
+ /*
* example snippets for free chipselects
- *
+ *
* device@5,0 {
- * compatible = "custom_driver";
- * reg = <5 0 0x02000000>;
+ * compatible = "custom_driver";
+ * reg = <5 0 0x02000000>;
* };
- *
+ *
* device@6,0 {
- * compatible = "custom_driver";
- * reg = <6 0 0x02000000>;
+ * compatible = "custom_driver";
+ * reg = <6 0 0x02000000>;
* };
- *
+ *
* device@7,0 {
- * compatible = "custom_driver";
- * reg = <7 0 0x02000000>;
+ * compatible = "custom_driver";
+ * reg = <7 0 0x02000000>;
* };
- */
+ */
};
};
-
diff --git a/arch/powerpc/boot/dts/uc101.dts b/arch/powerpc/boot/dts/uc101.dts
index 019264c6290..ba83d5488ec 100644
--- a/arch/powerpc/boot/dts/uc101.dts
+++ b/arch/powerpc/boot/dts/uc101.dts
@@ -11,79 +11,24 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "mpc5200b.dtsi"
/ {
model = "manroland,uc101";
compatible = "manroland,uc101";
- #address-cells = <1>;
- #size-cells = <1>;
- interrupt-parent = <&mpc5200_pic>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,5200@0 {
- device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <32>;
- i-cache-line-size = <32>;
- d-cache-size = <0x4000>; // L1, 16K
- i-cache-size = <0x4000>; // L1, 16K
- timebase-frequency = <0>; // from bootloader
- bus-frequency = <0>; // from bootloader
- clock-frequency = <0>; // from bootloader
- };
- };
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x04000000>; // 64MB
- };
soc5200@f0000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc5200b-immr";
- ranges = <0 0xf0000000 0x0000c000>;
- reg = <0xf0000000 0x00000100>;
- bus-frequency = <0>; // from bootloader
- system-frequency = <0>; // from bootloader
-
- cdm@200 {
- compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
- reg = <0x200 0x38>;
- };
-
- mpc5200_pic: interrupt-controller@500 {
- // 5200 interrupts are encoded into two levels;
- interrupt-controller;
- #interrupt-cells = <3>;
- compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
- reg = <0x500 0x80>;
- };
-
gpt0: timer@600 { // General Purpose Timer in GPIO mode
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x600 0x10>;
- interrupts = <1 9 0>;
gpio-controller;
#gpio-cells = <2>;
};
gpt1: timer@610 { // General Purpose Timer in GPIO mode
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x610 0x10>;
- interrupts = <1 10 0>;
gpio-controller;
#gpio-cells = <2>;
};
gpt2: timer@620 { // General Purpose Timer in GPIO mode
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x620 0x10>;
- interrupts = <1 11 0>;
gpio-controller;
#gpio-cells = <2>;
};
@@ -97,118 +42,85 @@
};
gpt4: timer@640 { // General Purpose Timer in GPIO mode
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x640 0x10>;
- interrupts = <1 13 0>;
gpio-controller;
#gpio-cells = <2>;
};
gpt5: timer@650 { // General Purpose Timer in GPIO mode
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x650 0x10>;
- interrupts = <1 14 0>;
gpio-controller;
#gpio-cells = <2>;
};
gpt6: timer@660 { // General Purpose Timer in GPIO mode
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x660 0x10>;
- interrupts = <1 15 0>;
gpio-controller;
#gpio-cells = <2>;
};
gpt7: timer@670 { // General Purpose Timer in GPIO mode
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x670 0x10>;
- interrupts = <1 16 0>;
gpio-controller;
#gpio-cells = <2>;
};
- gpio_simple: gpio@b00 {
- compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
- reg = <0xb00 0x40>;
- interrupts = <1 7 0>;
- gpio-controller;
- #gpio-cells = <2>;
+ rtc@800 {
+ status = "disabled";
};
- gpio_wkup: gpio@c00 {
- compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
- reg = <0xc00 0x40>;
- interrupts = <1 8 0 0 3 0>;
- gpio-controller;
- #gpio-cells = <2>;
+ can@900 {
+ status = "disabled";
+ };
+
+ can@980 {
+ status = "disabled";
};
- dma-controller@1200 {
- compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
- reg = <0x1200 0x80>;
- interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
- 3 4 0 3 5 0 3 6 0 3 7 0
- 3 8 0 3 9 0 3 10 0 3 11 0
- 3 12 0 3 13 0 3 14 0 3 15 0>;
+ spi@f00 {
+ status = "disabled";
};
- xlb@1f00 {
- compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
- reg = <0x1f00 0x100>;
+ usb@1000 {
+ status = "disabled";
};
- serial@2000 { /* PSC1 in UART mode */
+ psc@2000 { // PSC1
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
- reg = <0x2000 0x100>;
- interrupts = <2 1 0>;
};
- serial@2200 { /* PSC2 in UART mode */
+ psc@2200 { // PSC2
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
- reg = <0x2200 0x100>;
- interrupts = <2 2 0>;
};
- serial@2c00 { /* PSC6 in UART mode */
+ psc@2400 { // PSC3
+ status = "disabled";
+ };
+
+ psc@2600 { // PSC4
+ status = "disabled";
+ };
+
+ psc@2800 { // PSC5
+ status = "disabled";
+ };
+
+ psc@2c00 { // PSC6
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
- reg = <0x2c00 0x100>;
- interrupts = <2 4 0>;
};
ethernet@3000 {
- compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
- reg = <0x3000 0x400>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <2 5 0>;
phy-handle = <&phy0>;
};
mdio@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
- reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
- interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
-
phy0: ethernet-phy@0 {
compatible = "intel,lxt971";
reg = <0>;
};
};
- ata@3a00 {
- compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
- reg = <0x3a00 0x100>;
- interrupts = <2 7 0>;
+ i2c@3d00 {
+ status = "disabled";
};
i2c@3d40 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
- reg = <0x3d40 0x40>;
- interrupts = <2 16 0>;
fsl,preserve-clocking;
clock-frequency = <400000>;
@@ -221,19 +133,13 @@
reg = <0x51>;
};
};
+ };
- sram@8000 {
- compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
- reg = <0x8000 0x4000>;
- };
+ pci@f0000d00 {
+ status = "disabled";
};
localbus {
- compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
-
- #address-cells = <2>;
- #size-cells = <1>;
-
ranges = <0 0 0xff800000 0x00800000
1 0 0x80000000 0x00800000
3 0 0x80000000 0x00800000>;
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-29 07:27:45 +0000