summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/boot/mktree.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/boot/mktree.c')
-rw-r--r--arch/powerpc/boot/mktree.c152
1 files changed, 152 insertions, 0 deletions
diff --git a/arch/powerpc/boot/mktree.c b/arch/powerpc/boot/mktree.c
new file mode 100644
index 00000000000..4cb89299365
--- /dev/null
+++ b/arch/powerpc/boot/mktree.c
@@ -0,0 +1,152 @@
+/*
+ * Makes a tree bootable image for IBM Evaluation boards.
+ * Basically, just take a zImage, skip the ELF header, and stuff
+ * a 32 byte header on the front.
+ *
+ * We use htonl, which is a network macro, to make sure we're doing
+ * The Right Thing on an LE machine. It's non-obvious, but it should
+ * work on anything BSD'ish.
+ */
+
+#include <fcntl.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/stat.h>
+#include <unistd.h>
+#include <netinet/in.h>
+#ifdef __sun__
+#include <inttypes.h>
+#else
+#include <stdint.h>
+#endif
+
+/* This gets tacked on the front of the image. There are also a few
+ * bytes allocated after the _start label used by the boot rom (see
+ * head.S for details).
+ */
+typedef struct boot_block {
+ uint32_t bb_magic; /* 0x0052504F */
+ uint32_t bb_dest; /* Target address of the image */
+ uint32_t bb_num_512blocks; /* Size, rounded-up, in 512 byte blks */
+ uint32_t bb_debug_flag; /* Run debugger or image after load */
+ uint32_t bb_entry_point; /* The image address to start */
+ uint32_t bb_checksum; /* 32 bit checksum including header */
+ uint32_t reserved[2];
+} boot_block_t;
+
+#define IMGBLK 512
+char tmpbuf[IMGBLK];
+
+int main(int argc, char *argv[])
+{
+ int in_fd, out_fd;
+ int nblks, i;
+ uint cksum, *cp;
+ struct stat st;
+ boot_block_t bt;
+
+ if (argc < 3) {
+ fprintf(stderr, "usage: %s <zImage-file> <boot-image> [entry-point]\n",argv[0]);
+ exit(1);
+ }
+
+ if (stat(argv[1], &st) < 0) {
+ perror("stat");
+ exit(2);
+ }
+
+ nblks = (st.st_size + IMGBLK) / IMGBLK;
+
+ bt.bb_magic = htonl(0x0052504F);
+
+ /* If we have the optional entry point parameter, use it */
+ if (argc == 4)
+ bt.bb_dest = bt.bb_entry_point = htonl(strtoul(argv[3], NULL, 0));
+ else
+ bt.bb_dest = bt.bb_entry_point = htonl(0x500000);
+
+ /* We know these from the linker command.
+ * ...and then move it up into memory a little more so the
+ * relocation can happen.
+ */
+ bt.bb_num_512blocks = htonl(nblks);
+ bt.bb_debug_flag = 0;
+
+ bt.bb_checksum = 0;
+
+ /* To be neat and tidy :-).
+ */
+ bt.reserved[0] = 0;
+ bt.reserved[1] = 0;
+
+ if ((in_fd = open(argv[1], O_RDONLY)) < 0) {
+ perror("zImage open");
+ exit(3);
+ }
+
+ if ((out_fd = open(argv[2], (O_RDWR | O_CREAT | O_TRUNC), 0666)) < 0) {
+ perror("bootfile open");
+ exit(3);
+ }
+
+ cksum = 0;
+ cp = (void *)&bt;
+ for (i=0; i<sizeof(bt)/sizeof(uint); i++)
+ cksum += *cp++;
+
+ /* Assume zImage is an ELF file, and skip the 64K header.
+ */
+ if (read(in_fd, tmpbuf, IMGBLK) != IMGBLK) {
+ fprintf(stderr, "%s is too small to be an ELF image\n",
+ argv[1]);
+ exit(4);
+ }
+
+ if ((*(uint *)tmpbuf) != htonl(0x7f454c46)) {
+ fprintf(stderr, "%s is not an ELF image\n", argv[1]);
+ exit(4);
+ }
+
+ if (lseek(in_fd, (64 * 1024), SEEK_SET) < 0) {
+ fprintf(stderr, "%s failed to seek in ELF image\n", argv[1]);
+ exit(4);
+ }
+
+ nblks -= (64 * 1024) / IMGBLK;
+
+ /* And away we go......
+ */
+ if (write(out_fd, &bt, sizeof(bt)) != sizeof(bt)) {
+ perror("boot-image write");
+ exit(5);
+ }
+
+ while (nblks-- > 0) {
+ if (read(in_fd, tmpbuf, IMGBLK) < 0) {
+ perror("zImage read");
+ exit(5);
+ }
+ cp = (uint *)tmpbuf;
+ for (i=0; i<sizeof(tmpbuf)/sizeof(uint); i++)
+ cksum += *cp++;
+ if (write(out_fd, tmpbuf, sizeof(tmpbuf)) != sizeof(tmpbuf)) {
+ perror("boot-image write");
+ exit(5);
+ }
+ }
+
+ /* rewrite the header with the computed checksum.
+ */
+ bt.bb_checksum = htonl(cksum);
+ if (lseek(out_fd, 0, SEEK_SET) < 0) {
+ perror("rewrite seek");
+ exit(1);
+ }
+ if (write(out_fd, &bt, sizeof(bt)) != sizeof(bt)) {
+ perror("boot-image rewrite");
+ exit(1);
+ }
+
+ exit(0);
+}