diff options
Diffstat (limited to 'arch/powerpc/boot')
124 files changed, 22190 insertions, 2977 deletions
diff --git a/arch/powerpc/boot/.gitignore b/arch/powerpc/boot/.gitignore index 65f4118cbe7..5ef2bdf8d18 100644 --- a/arch/powerpc/boot/.gitignore +++ b/arch/powerpc/boot/.gitignore @@ -1,4 +1,5 @@ addnote +dtc empty.c hack-coff infblock.c @@ -30,6 +31,7 @@ zImage.*lds zImage.miboot zImage.pmac zImage.pseries +zImage.redboot* zImage.sandpoint zImage.vmode zconf.h diff --git a/arch/powerpc/boot/4xx.c b/arch/powerpc/boot/4xx.c index ebf9e217612..758edf1c581 100644 --- a/arch/powerpc/boot/4xx.c +++ b/arch/powerpc/boot/4xx.c @@ -22,16 +22,14 @@ #include "dcr.h" /* Read the 4xx SDRAM controller to get size of system memory. */ -void ibm4xx_fixup_memsize(void) +void ibm4xx_sdram_fixup_memsize(void) { int i; unsigned long memsize, bank_config; memsize = 0; for (i = 0; i < ARRAY_SIZE(sdram_bxcr); i++) { - mtdcr(DCRN_SDRAM0_CFGADDR, sdram_bxcr[i]); - bank_config = mfdcr(DCRN_SDRAM0_CFGDATA); - + bank_config = SDRAM0_READ(sdram_bxcr[i]); if (bank_config & SDRAM_CONFIG_BANK_ENABLE) memsize += SDRAM_CONFIG_BANK_SIZE(bank_config); } @@ -39,6 +37,69 @@ void ibm4xx_fixup_memsize(void) dt_fixup_memory(0, memsize); } +/* Read the 440SPe MQ controller to get size of system memory. */ +#define DCRN_MQ0_B0BAS 0x40 +#define DCRN_MQ0_B1BAS 0x41 +#define DCRN_MQ0_B2BAS 0x42 +#define DCRN_MQ0_B3BAS 0x43 + +static u64 ibm440spe_decode_bas(u32 bas) +{ + u64 base = ((u64)(bas & 0xFFE00000u)) << 2; + + /* open coded because I'm paranoid about invalid values */ + switch ((bas >> 4) & 0xFFF) { + case 0: + return 0; + case 0xffc: + return base + 0x000800000ull; + case 0xff8: + return base + 0x001000000ull; + case 0xff0: + return base + 0x002000000ull; + case 0xfe0: + return base + 0x004000000ull; + case 0xfc0: + return base + 0x008000000ull; + case 0xf80: + return base + 0x010000000ull; + case 0xf00: + return base + 0x020000000ull; + case 0xe00: + return base + 0x040000000ull; + case 0xc00: + return base + 0x080000000ull; + case 0x800: + return base + 0x100000000ull; + } + printf("Memory BAS value 0x%08x unsupported !\n", bas); + return 0; +} + +void ibm440spe_fixup_memsize(void) +{ + u64 banktop, memsize = 0; + + /* Ultimately, we should directly construct the memory node + * so we are able to handle holes in the memory address space + */ + banktop = ibm440spe_decode_bas(mfdcr(DCRN_MQ0_B0BAS)); + if (banktop > memsize) + memsize = banktop; + banktop = ibm440spe_decode_bas(mfdcr(DCRN_MQ0_B1BAS)); + if (banktop > memsize) + memsize = banktop; + banktop = ibm440spe_decode_bas(mfdcr(DCRN_MQ0_B2BAS)); + if (banktop > memsize) + memsize = banktop; + banktop = ibm440spe_decode_bas(mfdcr(DCRN_MQ0_B3BAS)); + if (banktop > memsize) + memsize = banktop; + + dt_fixup_memory(0, memsize); +} + + /* 4xx DDR1/2 Denali memory controller support */ /* DDR0 registers */ #define DDR0_02 2 @@ -77,19 +138,13 @@ void ibm4xx_fixup_memsize(void) #define DDR_GET_VAL(val, mask, shift) (((val) >> (shift)) & (mask)) -static inline u32 mfdcr_sdram0(u32 reg) -{ - mtdcr(DCRN_SDRAM0_CFGADDR, reg); - return mfdcr(DCRN_SDRAM0_CFGDATA); -} - void ibm4xx_denali_fixup_memsize(void) { u32 val, max_cs, max_col, max_row; u32 cs, col, row, bank, dpath; unsigned long memsize; - val = mfdcr_sdram0(DDR0_02); + val = SDRAM0_READ(DDR0_02); if (!DDR_GET_VAL(val, DDR_START, DDR_START_SHIFT)) fatal("DDR controller is not initialized\n"); @@ -99,12 +154,12 @@ void ibm4xx_denali_fixup_memsize(void) max_row = DDR_GET_VAL(val, DDR_MAX_ROW_REG, DDR_MAX_ROW_REG_SHIFT); /* get CS value */ - val = mfdcr_sdram0(DDR0_10); + val = SDRAM0_READ(DDR0_10); val = DDR_GET_VAL(val, DDR_CS_MAP, DDR_CS_MAP_SHIFT); cs = 0; while (val) { - if (val && 0x1) + if (val & 0x1) cs++; val = val >> 1; } @@ -115,15 +170,15 @@ void ibm4xx_denali_fixup_memsize(void) fatal("DDR wrong CS configuration\n"); /* get data path bytes */ - val = mfdcr_sdram0(DDR0_14); + val = SDRAM0_READ(DDR0_14); if (DDR_GET_VAL(val, DDR_REDUC, DDR_REDUC_SHIFT)) dpath = 8; /* 64 bits */ else dpath = 4; /* 32 bits */ - /* get adress pins (rows) */ - val = mfdcr_sdram0(DDR0_42); + /* get address pins (rows) */ + val = SDRAM0_READ(DDR0_42); row = DDR_GET_VAL(val, DDR_APIN, DDR_APIN_SHIFT); if (row > max_row) @@ -131,7 +186,7 @@ void ibm4xx_denali_fixup_memsize(void) row = max_row - row; /* get collomn size and banks */ - val = mfdcr_sdram0(DDR0_43); + val = SDRAM0_READ(DDR0_43); col = DDR_GET_VAL(val, DDR_COL_SZ, DDR_COL_SZ_SHIFT); if (col > max_col) @@ -179,13 +234,17 @@ void ibm40x_dbcr_reset(void) #define EMAC_RESET 0x20000000 void ibm4xx_quiesce_eth(u32 *emac0, u32 *emac1) { - /* Quiesce the MAL and EMAC(s) since PIBS/OpenBIOS don't do this for us */ + /* Quiesce the MAL and EMAC(s) since PIBS/OpenBIOS don't + * do this for us + */ if (emac0) *emac0 = EMAC_RESET; if (emac1) *emac1 = EMAC_RESET; mtdcr(DCRN_MAL0_CFG, MAL_RESET); + while (mfdcr(DCRN_MAL0_CFG) & MAL_RESET) + ; /* loop until reset takes effect */ } /* Read 4xx EBC bus bridge registers to get mappings of the peripheral @@ -217,84 +276,335 @@ void ibm4xx_fixup_ebc_ranges(const char *ebc) setprop(devp, "ranges", ranges, (p - ranges) * sizeof(u32)); } -#define SPRN_CCR1 0x378 -void ibm440ep_fixup_clocks(unsigned int sysclk, unsigned int ser_clk) +/* Calculate 440GP clocks */ +void ibm440gp_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk) { - u32 cpu, plb, opb, ebc, tb, uart0, m, vco; - u32 reg; - u32 fwdva, fwdvb, fbdv, lfbdv, opbdv0, perdv0, spcid0, prbdv0, tmp; - - mtdcr(DCRN_CPR0_ADDR, CPR0_PLLD0); - reg = mfdcr(DCRN_CPR0_DATA); - tmp = (reg & 0x000F0000) >> 16; - fwdva = tmp ? tmp : 16; - tmp = (reg & 0x00000700) >> 8; - fwdvb = tmp ? tmp : 8; - tmp = (reg & 0x1F000000) >> 24; - fbdv = tmp ? tmp : 32; - lfbdv = (reg & 0x0000007F); - - mtdcr(DCRN_CPR0_ADDR, CPR0_OPBD0); - reg = mfdcr(DCRN_CPR0_DATA); - tmp = (reg & 0x03000000) >> 24; - opbdv0 = tmp ? tmp : 4; - - mtdcr(DCRN_CPR0_ADDR, CPR0_PERD0); - reg = mfdcr(DCRN_CPR0_DATA); - tmp = (reg & 0x07000000) >> 24; - perdv0 = tmp ? tmp : 8; - - mtdcr(DCRN_CPR0_ADDR, CPR0_PRIMBD0); - reg = mfdcr(DCRN_CPR0_DATA); - tmp = (reg & 0x07000000) >> 24; - prbdv0 = tmp ? tmp : 8; - - mtdcr(DCRN_CPR0_ADDR, CPR0_SCPID); - reg = mfdcr(DCRN_CPR0_DATA); - tmp = (reg & 0x03000000) >> 24; - spcid0 = tmp ? tmp : 4; - - /* Calculate M */ - mtdcr(DCRN_CPR0_ADDR, CPR0_PLLC0); - reg = mfdcr(DCRN_CPR0_DATA); - tmp = (reg & 0x03000000) >> 24; - if (tmp == 0) { /* PLL output */ - tmp = (reg & 0x20000000) >> 29; - if (!tmp) /* PLLOUTA */ - m = fbdv * lfbdv * fwdva; + u32 sys0 = mfdcr(DCRN_CPC0_SYS0); + u32 cr0 = mfdcr(DCRN_CPC0_CR0); + u32 cpu, plb, opb, ebc, tb, uart0, uart1, m; + u32 opdv = CPC0_SYS0_OPDV(sys0); + u32 epdv = CPC0_SYS0_EPDV(sys0); + + if (sys0 & CPC0_SYS0_BYPASS) { + /* Bypass system PLL */ + cpu = plb = sys_clk; + } else { + if (sys0 & CPC0_SYS0_EXTSL) + /* PerClk */ + m = CPC0_SYS0_FWDVB(sys0) * opdv * epdv; else - m = fbdv * lfbdv * fwdvb; + /* CPU clock */ + m = CPC0_SYS0_FBDV(sys0) * CPC0_SYS0_FWDVA(sys0); + cpu = sys_clk * m / CPC0_SYS0_FWDVA(sys0); + plb = sys_clk * m / CPC0_SYS0_FWDVB(sys0); } - else if (tmp == 1) /* CPU output */ - m = fbdv * fwdva; + + opb = plb / opdv; + ebc = opb / epdv; + + /* FIXME: Check if this is for all 440GP, or just Ebony */ + if ((mfpvr() & 0xf0000fff) == 0x40000440) + /* Rev. B 440GP, use external system clock */ + tb = sys_clk; else - m = perdv0 * opbdv0 * fwdvb; + /* Rev. C 440GP, errata force us to use internal clock */ + tb = cpu; - vco = (m * sysclk) + (m >> 1); - cpu = vco / fwdva; - plb = vco / fwdvb / prbdv0; - opb = plb / opbdv0; - ebc = plb / perdv0; + if (cr0 & CPC0_CR0_U0EC) + /* External UART clock */ + uart0 = ser_clk; + else + /* Internal UART clock */ + uart0 = plb / CPC0_CR0_UDIV(cr0); + + if (cr0 & CPC0_CR0_U1EC) + /* External UART clock */ + uart1 = ser_clk; + else + /* Internal UART clock */ + uart1 = plb / CPC0_CR0_UDIV(cr0); - /* FIXME */ - uart0 = ser_clk; + printf("PPC440GP: SysClk = %dMHz (%x)\n\r", + (sys_clk + 500000) / 1000000, sys_clk); + + dt_fixup_cpu_clocks(cpu, tb, 0); + + dt_fixup_clock("/plb", plb); + dt_fixup_clock("/plb/opb", opb); + dt_fixup_clock("/plb/opb/ebc", ebc); + dt_fixup_clock("/plb/opb/serial@40000200", uart0); + dt_fixup_clock("/plb/opb/serial@40000300", uart1); +} + +#define SPRN_CCR1 0x378 + +static inline u32 __fix_zero(u32 v, u32 def) +{ + return v ? v : def; +} + +static unsigned int __ibm440eplike_fixup_clocks(unsigned int sys_clk, + unsigned int tmr_clk, + int per_clk_from_opb) +{ + /* PLL config */ + u32 pllc = CPR0_READ(DCRN_CPR0_PLLC); + u32 plld = CPR0_READ(DCRN_CPR0_PLLD); + + /* Dividers */ + u32 fbdv = __fix_zero((plld >> 24) & 0x1f, 32); + u32 fwdva = __fix_zero((plld >> 16) & 0xf, 16); + u32 fwdvb = __fix_zero((plld >> 8) & 7, 8); + u32 lfbdv = __fix_zero(plld & 0x3f, 64); + u32 pradv0 = __fix_zero((CPR0_READ(DCRN_CPR0_PRIMAD) >> 24) & 7, 8); + u32 prbdv0 = __fix_zero((CPR0_READ(DCRN_CPR0_PRIMBD) >> 24) & 7, 8); + u32 opbdv0 = __fix_zero((CPR0_READ(DCRN_CPR0_OPBD) >> 24) & 3, 4); + u32 perdv0 = __fix_zero((CPR0_READ(DCRN_CPR0_PERD) >> 24) & 3, 4); + + /* Input clocks for primary dividers */ + u32 clk_a, clk_b; + + /* Resulting clocks */ + u32 cpu, plb, opb, ebc, vco; + + /* Timebase */ + u32 ccr1, tb = tmr_clk; + + if (pllc & 0x40000000) { + u32 m; + + /* Feedback path */ + switch ((pllc >> 24) & 7) { + case 0: + /* PLLOUTx */ + m = ((pllc & 0x20000000) ? fwdvb : fwdva) * lfbdv; + break; + case 1: + /* CPU */ + m = fwdva * pradv0; + break; + case 5: + /* PERClk */ + m = fwdvb * prbdv0 * opbdv0 * perdv0; + break; + default: + printf("WARNING ! Invalid PLL feedback source !\n"); + goto bypass; + } + m *= fbdv; + vco = sys_clk * m; + clk_a = vco / fwdva; + clk_b = vco / fwdvb; + } else { +bypass: + /* Bypass system PLL */ + vco = 0; + clk_a = clk_b = sys_clk; + } + + cpu = clk_a / pradv0; + plb = clk_b / prbdv0; + opb = plb / opbdv0; + ebc = (per_clk_from_opb ? opb : plb) / perdv0; /* Figure out timebase. Either CPU or default TmrClk */ - asm volatile ( - "mfspr %0,%1\n" - : - "=&r"(reg) : "i"(SPRN_CCR1)); - if (reg & 0x0080) - tb = 25000000; /* TmrClk is 25MHz */ - else + ccr1 = mfspr(SPRN_CCR1); + + /* If passed a 0 tmr_clk, force CPU clock */ + if (tb == 0) { + ccr1 &= ~0x80u; + mtspr(SPRN_CCR1, ccr1); + } + if ((ccr1 & 0x0080) == 0) tb = cpu; dt_fixup_cpu_clocks(cpu, tb, 0); dt_fixup_clock("/plb", plb); dt_fixup_clock("/plb/opb", opb); dt_fixup_clock("/plb/opb/ebc", ebc); + + return plb; +} + +static void eplike_fixup_uart_clk(int index, const char *path, + unsigned int ser_clk, + unsigned int plb_clk) +{ + unsigned int sdr; + unsigned int clock; + + switch (index) { + case 0: + sdr = SDR0_READ(DCRN_SDR0_UART0); + break; + case 1: + sdr = SDR0_READ(DCRN_SDR0_UART1); + break; + case 2: + sdr = SDR0_READ(DCRN_SDR0_UART2); + break; + case 3: + sdr = SDR0_READ(DCRN_SDR0_UART3); + break; + default: + return; + } + + if (sdr & 0x00800000u) + clock = ser_clk; + else + clock = plb_clk / __fix_zero(sdr & 0xff, 256); + + dt_fixup_clock(path, clock); +} + +void ibm440ep_fixup_clocks(unsigned int sys_clk, + unsigned int ser_clk, + unsigned int tmr_clk) +{ + unsigned int plb_clk = __ibm440eplike_fixup_clocks(sys_clk, tmr_clk, 0); + + /* serial clocks beed fixup based on int/ext */ + eplike_fixup_uart_clk(0, "/plb/opb/serial@ef600300", ser_clk, plb_clk); + eplike_fixup_uart_clk(1, "/plb/opb/serial@ef600400", ser_clk, plb_clk); + eplike_fixup_uart_clk(2, "/plb/opb/serial@ef600500", ser_clk, plb_clk); + eplike_fixup_uart_clk(3, "/plb/opb/serial@ef600600", ser_clk, plb_clk); +} + +void ibm440gx_fixup_clocks(unsigned int sys_clk, + unsigned int ser_clk, + unsigned int tmr_clk) +{ + unsigned int plb_clk = __ibm440eplike_fixup_clocks(sys_clk, tmr_clk, 1); + + /* serial clocks beed fixup based on int/ext */ + eplike_fixup_uart_clk(0, "/plb/opb/serial@40000200", ser_clk, plb_clk); + eplike_fixup_uart_clk(1, "/plb/opb/serial@40000300", ser_clk, plb_clk); +} + +void ibm440spe_fixup_clocks(unsigned int sys_clk, + unsigned int ser_clk, + unsigned int tmr_clk) +{ + unsigned int plb_clk = __ibm440eplike_fixup_clocks(sys_clk, tmr_clk, 1); + + /* serial clocks beed fixup based on int/ext */ + eplike_fixup_uart_clk(0, "/plb/opb/serial@10000200", ser_clk, plb_clk); + eplike_fixup_uart_clk(1, "/plb/opb/serial@10000300", ser_clk, plb_clk); + eplike_fixup_uart_clk(2, "/plb/opb/serial@10000600", ser_clk, plb_clk); +} + +void ibm405gp_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk) +{ + u32 pllmr = mfdcr(DCRN_CPC0_PLLMR); + u32 cpc0_cr0 = mfdcr(DCRN_405_CPC0_CR0); + u32 cpc0_cr1 = mfdcr(DCRN_405_CPC0_CR1); + u32 psr = mfdcr(DCRN_405_CPC0_PSR); + u32 cpu, plb, opb, ebc, tb, uart0, uart1, m; + u32 fwdv, fwdvb, fbdv, cbdv, opdv, epdv, ppdv, udiv; + + fwdv = (8 - ((pllmr & 0xe0000000) >> 29)); + fbdv = (pllmr & 0x1e000000) >> 25; + if (fbdv == 0) + fbdv = 16; + cbdv = ((pllmr & 0x00060000) >> 17) + 1; /* CPU:PLB */ + opdv = ((pllmr & 0x00018000) >> 15) + 1; /* PLB:OPB */ + ppdv = ((pllmr & 0x00001800) >> 13) + 1; /* PLB:PCI */ + epdv = ((pllmr & 0x00001800) >> 11) + 2; /* PLB:EBC */ + udiv = ((cpc0_cr0 & 0x3e) >> 1) + 1; + + /* check for 405GPr */ + if ((mfpvr() & 0xfffffff0) == (0x50910951 & 0xfffffff0)) { + fwdvb = 8 - (pllmr & 0x00000007); + if (!(psr & 0x00001000)) /* PCI async mode enable == 0 */ + if (psr & 0x00000020) /* New mode enable */ + m = fwdvb * 2 * ppdv; + else + m = fwdvb * cbdv * ppdv; + else if (psr & 0x00000020) /* New mode enable */ + if (psr & 0x00000800) /* PerClk synch mode */ + m = fwdvb * 2 * epdv; + else + m = fbdv * fwdv; + else if (epdv == fbdv) + m = fbdv * cbdv * epdv; + else + m = fbdv * fwdvb * cbdv; + + cpu = sys_clk * m / fwdv; + plb = sys_clk * m / (fwdvb * cbdv); + } else { + m = fwdv * fbdv * cbdv; + cpu = sys_clk * m / fwdv; + plb = cpu / cbdv; + } + opb = plb / opdv; + ebc = plb / epdv; + + if (cpc0_cr0 & 0x80) + /* uart0 uses the external clock */ + uart0 = ser_clk; + else + uart0 = cpu / udiv; + + if (cpc0_cr0 & 0x40) + /* uart1 uses the external clock */ + uart1 = ser_clk; + else + uart1 = cpu / udiv; + + /* setup the timebase clock to tick at the cpu frequency */ + cpc0_cr1 = cpc0_cr1 & ~0x00800000; + mtdcr(DCRN_405_CPC0_CR1, cpc0_cr1); + tb = cpu; + + dt_fixup_cpu_clocks(cpu, tb, 0); + dt_fixup_clock("/plb", plb); + dt_fixup_clock("/plb/opb", opb); + dt_fixup_clock("/plb/ebc", ebc); + dt_fixup_clock("/plb/opb/serial@ef600300", uart0); + dt_fixup_clock("/plb/opb/serial@ef600400", uart1); +} + + +void ibm405ep_fixup_clocks(unsigned int sys_clk) +{ + u32 pllmr0 = mfdcr(DCRN_CPC0_PLLMR0); + u32 pllmr1 = mfdcr(DCRN_CPC0_PLLMR1); + u32 cpc0_ucr = mfdcr(DCRN_CPC0_UCR); + u32 cpu, plb, opb, ebc, uart0, uart1; + u32 fwdva, fwdvb, fbdv, cbdv, opdv, epdv; + u32 pllmr0_ccdv, tb, m; + + fwdva = 8 - ((pllmr1 & 0x00070000) >> 16); + fwdvb = 8 - ((pllmr1 & 0x00007000) >> 12); + fbdv = (pllmr1 & 0x00f00000) >> 20; + if (fbdv == 0) + fbdv = 16; + + cbdv = ((pllmr0 & 0x00030000) >> 16) + 1; /* CPU:PLB */ + epdv = ((pllmr0 & 0x00000300) >> 8) + 2; /* PLB:EBC */ + opdv = ((pllmr0 & 0x00003000) >> 12) + 1; /* PLB:OPB */ + + m = fbdv * fwdvb; + + pllmr0_ccdv = ((pllmr0 & 0x00300000) >> 20) + 1; + if (pllmr1 & 0x80000000) + cpu = sys_clk * m / (fwdva * pllmr0_ccdv); + else + cpu = sys_clk / pllmr0_ccdv; + + plb = cpu / cbdv; + opb = plb / opdv; + ebc = plb / epdv; + tb = cpu; + uart0 = cpu / (cpc0_ucr & 0x0000007f); + uart1 = cpu / ((cpc0_ucr & 0x00007f00) >> 8); + + dt_fixup_cpu_clocks(cpu, tb, 0); + dt_fixup_clock("/plb", plb); + dt_fixup_clock("/plb/opb", opb); + dt_fixup_clock("/plb/ebc", ebc); dt_fixup_clock("/plb/opb/serial@ef600300", uart0); - dt_fixup_clock("/plb/opb/serial@ef600400", uart0); - dt_fixup_clock("/plb/opb/serial@ef600500", uart0); - dt_fixup_clock("/plb/opb/serial@ef600600", uart0); + dt_fixup_clock("/plb/opb/serial@ef600400", uart1); } diff --git a/arch/powerpc/boot/4xx.h b/arch/powerpc/boot/4xx.h index adba6a599a9..2606e64f0c4 100644 --- a/arch/powerpc/boot/4xx.h +++ b/arch/powerpc/boot/4xx.h @@ -11,12 +11,22 @@ #ifndef _POWERPC_BOOT_4XX_H_ #define _POWERPC_BOOT_4XX_H_ -void ibm4xx_fixup_memsize(void); +void ibm4xx_sdram_fixup_memsize(void); +void ibm440spe_fixup_memsize(void); void ibm4xx_denali_fixup_memsize(void); void ibm44x_dbcr_reset(void); void ibm40x_dbcr_reset(void); void ibm4xx_quiesce_eth(u32 *emac0, u32 *emac1); void ibm4xx_fixup_ebc_ranges(const char *ebc); -void ibm440ep_fixup_clocks(unsigned int sysclk, unsigned int ser_clk); + +void ibm405gp_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk); +void ibm405ep_fixup_clocks(unsigned int sys_clk); +void ibm440gp_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk); +void ibm440ep_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk, + unsigned int tmr_clk); +void ibm440gx_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk, + unsigned int tmr_clk); +void ibm440spe_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk, + unsigned int tmr_clk); #endif /* _POWERPC_BOOT_4XX_H_ */ diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index 4b1d98b8135..122a2707899 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -33,12 +33,15 @@ ifeq ($(call cc-option-yn, -fstack-protector),y) BOOTCFLAGS += -fno-stack-protector endif -BOOTCFLAGS += -I$(obj) -I$(srctree)/$(obj) +BOOTCFLAGS += -I$(obj) -I$(srctree)/$(obj) -I$(srctree)/$(src)/libfdt $(obj)/4xx.o: BOOTCFLAGS += -mcpu=440 $(obj)/ebony.o: BOOTCFLAGS += -mcpu=440 +$(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=440 +$(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=440 $(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405 + zlib := inffast.c inflate.c inftrees.c zlibheader := inffast.h inffixed.h inflate.h inftrees.h infutil.h zliblinuxheader := zlib.h zconf.h zutil.h @@ -46,17 +49,21 @@ zliblinuxheader := zlib.h zconf.h zutil.h $(addprefix $(obj)/,$(zlib) gunzip_util.o main.o): \ $(addprefix $(obj)/,$(zliblinuxheader)) $(addprefix $(obj)/,$(zlibheader)) -src-wlib := string.S crt0.S stdio.c main.c flatdevtree.c flatdevtree_misc.c \ +src-libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c +src-wlib := string.S crt0.S stdio.c main.c \ + $(addprefix libfdt/,$(src-libfdt)) libfdt-wrapper.c \ ns16550.c serial.c simple_alloc.c div64.S util.S \ gunzip_util.c elf_util.c $(zlib) devtree.c oflib.c ofconsole.c \ 4xx.c ebony.c mv64x60.c mpsc.c mv64x60_i2c.c cuboot.c bamboo.c \ cpm-serial.c stdlib.c mpc52xx-psc.c planetcore.c uartlite.c \ fsl-soc.c mpc8xx.c pq2.c -src-plat := of.c cuboot-52xx.c cuboot-83xx.c cuboot-85xx.c holly.c \ +src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c \ cuboot-ebony.c treeboot-ebony.c prpmc2800.c \ ps3-head.S ps3-hvcall.S ps3.c treeboot-bamboo.c cuboot-8xx.c \ cuboot-pq2.c cuboot-sequoia.c treeboot-walnut.c cuboot-bamboo.c \ - fixed-head.S ep88xc.c cuboot-hpc2.c + fixed-head.S ep88xc.c cuboot-hpc2.c ep405.c cuboot-taishan.c \ + cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \ + cuboot-warp.c cuboot-85xx-cpm2.c src-boot := $(src-wlib) $(src-plat) empty.c src-boot := $(addprefix $(obj)/, $(src-boot)) @@ -101,24 +108,61 @@ quiet_cmd_bootar = BOOTAR $@ cmd_bootar = $(CROSS32AR) -cr $@.$$$$ $(filter-out FORCE,$^); mv $@.$$$$ $@ $(patsubst %.c,%.o, $(filter %.c, $(src-boot))): %.o: %.c FORCE + $(Q)mkdir -p $(dir $@) $(call if_changed_dep,bootcc) $(patsubst %.S,%.o, $(filter %.S, $(src-boot))): %.o: %.S FORCE + $(Q)mkdir -p $(dir $@) $(call if_changed_dep,bootas) $(obj)/wrapper.a: $(obj-wlib) FORCE $(call if_changed,bootar) -hostprogs-y := addnote addRamDisk hack-coff mktree +hostprogs-y := addnote addRamDisk hack-coff mktree dtc targets += $(patsubst $(obj)/%,%,$(obj-boot) wrapper.a) extra-y := $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \ $(obj)/zImage.lds $(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds wrapper :=$(srctree)/$(src)/wrapper -wrapperbits := $(extra-y) $(addprefix $(obj)/,addnote hack-coff mktree) \ +wrapperbits := $(extra-y) $(addprefix $(obj)/,addnote hack-coff mktree dtc) \ $(wrapper) FORCE ############# +# Bits for building dtc +# DTC_GENPARSER := 1 # Uncomment to rebuild flex/bison output + +dtc-objs := dtc.o flattree.o fstree.o data.o livetree.o treesource.o srcpos.o checks.o +dtc-objs += dtc-lexer.lex.o dtc-parser.tab.o +dtc-objs := $(addprefix dtc-src/, $(dtc-objs)) + +# prerequisites on generated files needs to be explicit +$(obj)/dtc-src/dtc-parser.tab.o: $(obj)/dtc-src/dtc-parser.tab.c $(obj)/dtc-src/dtc-parser.tab.h +$(obj)/dtc-src/dtc-lexer.lex.o: $(obj)/dtc-src/dtc-lexer.lex.c $(obj)/dtc-src/dtc-parser.tab.h + +HOSTCFLAGS += -I$(src)/dtc-src/ -I$(src)/libfdt/ + +targets += dtc-src/dtc-parser.tab.c +targets += dtc-src/dtc-lexer.lex.c + +ifdef DTC_GENPARSER +BISON = bison +FLEX = flex + +quiet_cmd_bison = BISON $@ + cmd_bison = $(BISON) -o$@ -d $<; cp $@ $@_shipped +quiet_cmd_flex = FLEX $@ + cmd_flex = $(FLEX) -o$@ $<; cp $@ $@_shipped + +$(obj)/dtc-src/dtc-parser.tab.c: $(src)/dtc-src/dtc-parser.y FORCE + $(call if_changed,bison) + +$(obj)/dtc-src/dtc-parser.tab.h: $(obj)/dtc-src/dtc-parser.tab.c + +$(obj)/dtc-src/dtc-lexer.lex.c: $(src)/dtc-src/dtc-lexer.l FORCE + $(call if_changed,flex) +endif + +############# # Bits for building various flavours of zImage ifneq ($(CROSS32_COMPILE),) @@ -150,15 +194,29 @@ image-$(CONFIG_DEFAULT_UIMAGE) += uImage ifneq ($(CONFIG_DEVICE_TREE),"") image-$(CONFIG_PPC_8xx) += cuImage.8xx image-$(CONFIG_PPC_EP88XC) += zImage.ep88xc +image-$(CONFIG_EP405) += zImage.ep405 image-$(CONFIG_8260) += cuImage.pq2 +image-$(CONFIG_EP8248E) += zImage.ep8248e image-$(CONFIG_PPC_MPC52xx) += cuImage.52xx +image-$(CONFIG_STORCENTER) += cuImage.824x image-$(CONFIG_PPC_83xx) += cuImage.83xx image-$(CONFIG_PPC_85xx) += cuImage.85xx +ifeq ($(CONFIG_CPM2),y) +image-$(CONFIG_PPC_85xx) += cuImage.85xx-cpm2 +endif image-$(CONFIG_MPC7448HPC2) += cuImage.hpc2 image-$(CONFIG_EBONY) += treeImage.ebony cuImage.ebony image-$(CONFIG_BAMBOO) += treeImage.bamboo cuImage.bamboo image-$(CONFIG_SEQUOIA) += cuImage.sequoia +image-$(CONFIG_RAINIER) += cuImage.rainier image-$(CONFIG_WALNUT) += treeImage.walnut +image-$(CONFIG_TAISHAN) += cuImage.taishan +image-$(CONFIG_KATMAI) += cuImage.katmai +image-$(CONFIG_WARP) += cuImage.warp +endif + +ifneq ($(CONFIG_REDBOOT),"") +image-$(CONFIG_PPC_8xx) += zImage.redboot-8xx endif # For 32-bit powermacs, build the COFF and miboot images @@ -243,3 +301,51 @@ clean-kernel := vmlinux.strip vmlinux.bin clean-kernel += $(addsuffix .gz,$(clean-kernel)) # If not absolute clean-files are relative to $(obj). clean-files += $(addprefix $(objtree)/, $(clean-kernel)) + +WRAPPER_OBJDIR := /usr/lib/kernel-wrapper +WRAPPER_DTSDIR := /usr/lib/kernel-wrapper/dts +WRAPPER_BINDIR := /usr/sbin +INSTALL := install + +extra-installed := $(patsubst $(obj)/%, $(DESTDIR)$(WRAPPER_OBJDIR)/%, $(extra-y)) +hostprogs-installed := $(patsubst %, $(DESTDIR)$(WRAPPER_BINDIR)/%, $(hostprogs-y)) +wrapper-installed := $(DESTDIR)$(WRAPPER_BINDIR)/wrapper +dts-installed := $(patsubst $(obj)/dts/%, $(DESTDIR)$(WRAPPER_DTSDIR)/%, $(wildcard $(obj)/dts/*.dts)) + +all-installed := $(extra-installed) $(hostprogs-installed) $(wrapper-installed) $(dts-installed) + +quiet_cmd_mkdir = MKDIR $(patsubst $(INSTALL_HDR_PATH)/%,%,$@) + cmd_mkdir = mkdir -p $@ + +quiet_cmd_install = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_OBJDIR)/%,%,$@) + cmd_install = $(INSTALL) -m0644 $(patsubst $(DESTDIR)$(WRAPPER_OBJDIR)/%,$(obj)/%,$@) $@ + +quiet_cmd_install_dts = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_DTSDIR)/%,dts/%,$@) + cmd_install_dts = $(INSTALL) -m0644 $(patsubst $(DESTDIR)$(WRAPPER_DTSDIR)/%,$(srctree)/$(obj)/dts/%,$@) $@ + +quiet_cmd_install_exe = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,%,$@) + cmd_install_exe = $(INSTALL) -m0755 $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,$(obj)/%,$@) $@ + +quiet_cmd_install_wrapper = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,%,$@) + cmd_install_wrapper = $(INSTALL) -m0755 $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,$(srctree)/$(obj)/%,$@) $@ ;\ + sed -i $@ -e 's%^object=.*%object=$(WRAPPER_OBJDIR)%' \ + -e 's%^objbin=.*%objbin=$(WRAPPER_BINDIR)%' \ + + +$(DESTDIR)$(WRAPPER_OBJDIR) $(DESTDIR)$(WRAPPER_DTSDIR) $(DESTDIR)$(WRAPPER_BINDIR): + $(call cmd,mkdir) + +$(extra-installed) : $(DESTDIR)$(WRAPPER_OBJDIR)/% : $(obj)/% | $(DESTDIR)$(WRAPPER_OBJDIR) + $(call cmd,install) + +$(hostprogs-installed) : $(DESTDIR)$(WRAPPER_BINDIR)/% : $(obj)/% | $(DESTDIR)$(WRAPPER_BINDIR) + $(call cmd,install_exe) + +$(dts-installed) : $(DESTDIR)$(WRAPPER_DTSDIR)/% : $(srctree)/$(obj)/dts/% | $(DESTDIR)$(WRAPPER_DTSDIR) + $(call cmd,install_dts) + +$(wrapper-installed): $(DESTDIR)$(WRAPPER_BINDIR) $(srctree)/$(obj)/wrapper | $(DESTDIR)$(WRAPPER_BINDIR) + $(call cmd,install_wrapper) + +$(obj)/bootwrapper_install: $(all-installed) + diff --git a/arch/powerpc/boot/bamboo.c b/arch/powerpc/boot/bamboo.c index f61fcdab1c7..54b33f1500e 100644 --- a/arch/powerpc/boot/bamboo.c +++ b/arch/powerpc/boot/bamboo.c @@ -30,8 +30,8 @@ static void bamboo_fixups(void) { unsigned long sysclk = 33333333; - ibm440ep_fixup_clocks(sysclk, 11059200); - ibm4xx_fixup_memsize(); + ibm440ep_fixup_clocks(sysclk, 11059200, 25000000); + ibm4xx_sdram_fixup_memsize(); ibm4xx_quiesce_eth((u32 *)0xef600e00, (u32 *)0xef600f00); dt_fixup_mac_addresses(bamboo_mac0, bamboo_mac1); } @@ -42,6 +42,6 @@ void bamboo_init(void *mac0, void *mac1) platform_ops.exit = ibm44x_dbcr_reset; bamboo_mac0 = mac0; bamboo_mac1 = mac1; - ft_init(_dtb_start, 0, 32); + fdt_init(_dtb_start); serial_console_init(); } diff --git a/arch/powerpc/boot/cuboot-52xx.c b/arch/powerpc/boot/cuboot-52xx.c index 9256a26d40e..a8611546a65 100644 --- a/arch/powerpc/boot/cuboot-52xx.c +++ b/arch/powerpc/boot/cuboot-52xx.c @@ -53,7 +53,7 @@ void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7) { CUBOOT_INIT(); - ft_init(_dtb_start, _dtb_end - _dtb_start, 32); + fdt_init(_dtb_start); serial_console_init(); platform_ops.fixups = platform_fixups; } diff --git a/arch/powerpc/boot/cuboot-824x.c b/arch/powerpc/boot/cuboot-824x.c new file mode 100644 index 00000000000..ced90c53de4 --- /dev/null +++ b/arch/powerpc/boot/cuboot-824x.c @@ -0,0 +1,53 @@ +/* + * Old U-boot compatibility for 824x + * + * Copyright (c) 2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include "ops.h" +#include "stdio.h" +#include "cuboot.h" + +#define TARGET_824x +#include "ppcboot.h" + +static bd_t bd; + + +static void platform_fixups(void) +{ + void *soc; + + dt_fixup_memory(bd.bi_memstart, bd.bi_memsize); + dt_fixup_mac_addresses(bd.bi_enetaddr); + dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 4, bd.bi_busfreq); + + soc = find_node_by_devtype(NULL, "soc"); + if (soc) { + void *serial = NULL; + + setprop(soc, "bus-frequency", &bd.bi_busfreq, + sizeof(bd.bi_busfreq)); + + while ((serial = find_node_by_devtype(serial, "serial"))) { + if (get_parent(serial) != soc) + continue; + + setprop(serial, "clock-frequency", &bd.bi_busfreq, + sizeof(bd.bi_busfreq)); + } + } +} + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + CUBOOT_INIT(); + fdt_init(_dtb_start); + serial_console_init(); + platform_ops.fixups = platform_fixups; +} diff --git a/arch/powerpc/boot/cuboot-83xx.c b/arch/powerpc/boot/cuboot-83xx.c index a0505509abc..61af1c1e825 100644 --- a/arch/powerpc/boot/cuboot-83xx.c +++ b/arch/powerpc/boot/cuboot-83xx.c @@ -24,7 +24,8 @@ static void platform_fixups(void) void *soc; dt_fixup_memory(bd.bi_memstart, bd.bi_memsize); - dt_fixup_mac_addresses(bd.bi_enetaddr, bd.bi_enet1addr); + dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr); + dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr); dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 4, bd.bi_busfreq); /* Unfortunately, the specific model number is encoded in the @@ -52,7 +53,7 @@ void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7) { CUBOOT_INIT(); - ft_init(_dtb_start, _dtb_end - _dtb_start, 32); + fdt_init(_dtb_start); serial_console_init(); platform_ops.fixups = platform_fixups; } diff --git a/arch/powerpc/boot/cuboot-85xx-cpm2.c b/arch/powerpc/boot/cuboot-85xx-cpm2.c new file mode 100644 index 00000000000..723872ddd44 --- /dev/null +++ b/arch/powerpc/boot/cuboot-85xx-cpm2.c @@ -0,0 +1,66 @@ +/* + * Old U-boot compatibility for 85xx + * + * Author: Scott Wood <scottwood@freescale.com> + * + * Copyright (c) 2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include "ops.h" +#include "stdio.h" +#include "cuboot.h" + +#define TARGET_85xx +#define TARGET_CPM2 +#include "ppcboot.h" + +static bd_t bd; + +static void platform_fixups(void) +{ + void *devp; + + dt_fixup_memory(bd.bi_memstart, bd.bi_memsize); + dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr); + dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr); + dt_fixup_mac_address_by_alias("ethernet2", bd.bi_enet2addr); + dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 8, bd.bi_busfreq); + + /* Unfortunately, the specific model number is encoded in the + * soc node name in existing dts files -- once that is fixed, + * this can do a simple path lookup. + */ + devp = find_node_by_devtype(NULL, "soc"); + if (devp) { + void *serial = NULL; + + setprop(devp, "bus-frequency", &bd.bi_busfreq, + sizeof(bd.bi_busfreq)); + + while ((serial = find_node_by_devtype(serial, "serial"))) { + if (get_parent(serial) != devp) + continue; + + setprop(serial, "clock-frequency", &bd.bi_busfreq, + sizeof(bd.bi_busfreq)); + } + } + + devp = find_node_by_compatible(NULL, "fsl,cpm2-brg"); + if (devp) + setprop(devp, "clock-frequency", &bd.bi_brgfreq, + sizeof(bd.bi_brgfreq)); +} + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + CUBOOT_INIT(); + fdt_init(_dtb_start); + serial_console_init(); + platform_ops.fixups = platform_fixups; +} diff --git a/arch/powerpc/boot/cuboot-85xx.c b/arch/powerpc/boot/cuboot-85xx.c index 345dcbecef0..6776a1a29f1 100644 --- a/arch/powerpc/boot/cuboot-85xx.c +++ b/arch/powerpc/boot/cuboot-85xx.c @@ -24,8 +24,9 @@ static void platform_fixups(void) void *soc; dt_fixup_memory(bd.bi_memstart, bd.bi_memsize); - dt_fixup_mac_addresses(bd.bi_enetaddr, bd.bi_enet1addr, - bd.bi_enet2addr); + dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr); + dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr); + dt_fixup_mac_address_by_alias("ethernet2", bd.bi_enet2addr); dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 8, bd.bi_busfreq); /* Unfortunately, the specific model number is encoded in the @@ -53,7 +54,7 @@ void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7) { CUBOOT_INIT(); - ft_init(_dtb_start, _dtb_end - _dtb_start, 32); + fdt_init(_dtb_start); serial_console_init(); platform_ops.fixups = platform_fixups; } diff --git a/arch/powerpc/boot/cuboot-8xx.c b/arch/powerpc/boot/cuboot-8xx.c index 0e82015a5f9..c202c8868bd 100644 --- a/arch/powerpc/boot/cuboot-8xx.c +++ b/arch/powerpc/boot/cuboot-8xx.c @@ -41,7 +41,7 @@ void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7) { CUBOOT_INIT(); - ft_init(_dtb_start, _dtb_end - _dtb_start, 32); + fdt_init(_dtb_start); serial_console_init(); platform_ops.fixups = platform_fixups; } diff --git a/arch/powerpc/boot/cuboot-hpc2.c b/arch/powerpc/boot/cuboot-hpc2.c index d333898bca3..1b8953259d7 100644 --- a/arch/powerpc/boot/cuboot-hpc2.c +++ b/arch/powerpc/boot/cuboot-hpc2.c @@ -42,7 +42,7 @@ void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7) { CUBOOT_INIT(); - ft_init(_dtb_start, _dtb_end - _dtb_start, 32); + fdt_init(_dtb_start); serial_console_init(); platform_ops.fixups = platform_fixups; } diff --git a/arch/powerpc/boot/cuboot-katmai.c b/arch/powerpc/boot/cuboot-katmai.c new file mode 100644 index 00000000000..c021167f938 --- /dev/null +++ b/arch/powerpc/boot/cuboot-katmai.c @@ -0,0 +1,56 @@ +/* + * Old U-boot compatibility for Katmai + * + * Author: Hugh Blemings <hugh@au.ibm.com> + * + * Copyright 2007 Hugh Blemings, IBM Corporation. + * Based on cuboot-ebony.c which is: + * Copyright 2007 David Gibson, IBM Corporation. + * Based on cuboot-83xx.c, which is: + * Copyright (c) 2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include "ops.h" +#include "stdio.h" +#include "reg.h" +#include "dcr.h" +#include "4xx.h" +#include "44x.h" +#include "cuboot.h" + +#define TARGET_44x +#include "ppcboot.h" + +static bd_t bd; + +BSS_STACK(4096); + +static void katmai_fixups(void) +{ + unsigned long sysclk = 33333000; + + /* 440SP Clock logic is all but identical to 440GX + * so we just use that code for now at least + */ + ibm440spe_fixup_clocks(sysclk, 6 * 1843200, 0); + + ibm440spe_fixup_memsize(); + + dt_fixup_mac_address(0, bd.bi_enetaddr); + + ibm4xx_fixup_ebc_ranges("/plb/opb/ebc"); +} + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + CUBOOT_INIT(); + + platform_ops.fixups = katmai_fixups; + fdt_init(_dtb_start); + serial_console_init(); +} diff --git a/arch/powerpc/boot/cuboot-pq2.c b/arch/powerpc/boot/cuboot-pq2.c index 61574f3272d..f56ac6cae9f 100644 --- a/arch/powerpc/boot/cuboot-pq2.c +++ b/arch/powerpc/boot/cuboot-pq2.c @@ -255,7 +255,7 @@ void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7) { CUBOOT_INIT(); - ft_init(_dtb_start, _dtb_end - _dtb_start, 32); + fdt_init(_dtb_start); serial_console_init(); platform_ops.fixups = pq2_platform_fixups; } diff --git a/arch/powerpc/boot/cuboot-rainier.c b/arch/powerpc/boot/cuboot-rainier.c new file mode 100644 index 00000000000..cf452b66dce --- /dev/null +++ b/arch/powerpc/boot/cuboot-rainier.c @@ -0,0 +1,56 @@ +/* + * Old U-boot compatibility for Rainier + * + * Valentine Barshak <vbarshak@ru.mvista.com> + * Copyright 2007 MontaVista Software, Inc + * + * Based on Ebony code by David Gibson <david@gibson.dropbear.id.au> + * Copyright IBM Corporation, 2007 + * + * Based on Bamboo code by Josh Boyer <jwboyer@linux.vnet.ibm.com> + * Copyright IBM Corporation, 2007 + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 of the License + */ + +#include <stdarg.h> +#include <stddef.h> +#include "types.h" +#include "elf.h" +#include "string.h" +#include "stdio.h" +#include "page.h" +#include "ops.h" +#include "dcr.h" +#include "4xx.h" +#include "44x.h" +#include "cuboot.h" + +#define TARGET_4xx +#define TARGET_44x +#include "ppcboot.h" + +static bd_t bd; + + +static void rainier_fixups(void) +{ + unsigned long sysclk = 33333333; + + ibm440ep_fixup_clocks(sysclk, 11059200, 50000000); + ibm4xx_fixup_ebc_ranges("/plb/opb/ebc"); + ibm4xx_denali_fixup_memsize(); + dt_fixup_mac_addresses(&bd.bi_enetaddr, &bd.bi_enet1addr); +} + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + CUBOOT_INIT(); + platform_ops.fixups = rainier_fixups; + platform_ops.exit = ibm44x_dbcr_reset; + fdt_init(_dtb_start); + serial_console_init(); +} diff --git a/arch/powerpc/boot/cuboot-sequoia.c b/arch/powerpc/boot/cuboot-sequoia.c index ec635e0bd4e..f555575a44d 100644 --- a/arch/powerpc/boot/cuboot-sequoia.c +++ b/arch/powerpc/boot/cuboot-sequoia.c @@ -39,7 +39,7 @@ static void sequoia_fixups(void) { unsigned long sysclk = 33333333; - ibm440ep_fixup_clocks(sysclk, 11059200); + ibm440ep_fixup_clocks(sysclk, 11059200, 50000000); ibm4xx_fixup_ebc_ranges("/plb/opb/ebc"); ibm4xx_denali_fixup_memsize(); dt_fixup_mac_addresses(&bd.bi_enetaddr, &bd.bi_enet1addr); @@ -51,6 +51,6 @@ void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, CUBOOT_INIT(); platform_ops.fixups = sequoia_fixups; platform_ops.exit = ibm44x_dbcr_reset; - ft_init(_dtb_start, 0, 32); + fdt_init(_dtb_start); serial_console_init(); } diff --git a/arch/powerpc/boot/cuboot-taishan.c b/arch/powerpc/boot/cuboot-taishan.c new file mode 100644 index 00000000000..f66455a45ab --- /dev/null +++ b/arch/powerpc/boot/cuboot-taishan.c @@ -0,0 +1,54 @@ +/* + * Old U-boot compatibility for Taishan + * + * Author: Hugh Blemings <hugh@au.ibm.com> + * + * Copyright 2007 Hugh Blemings, IBM Corporation. + * Based on cuboot-ebony.c which is: + * Copyright 2007 David Gibson, IBM Corporation. + * Based on cuboot-83xx.c, which is: + * Copyright (c) 2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include "ops.h" +#include "stdio.h" +#include "cuboot.h" +#include "reg.h" +#include "dcr.h" +#include "4xx.h" + +#define TARGET_44x +#include "ppcboot.h" + +static bd_t bd; + +BSS_STACK(4096); + +static void taishan_fixups(void) +{ + /* FIXME: sysclk should be derived by reading the FPGA + registers */ + unsigned long sysclk = 33000000; + + ibm440gx_fixup_clocks(sysclk, 6 * 1843200, 25000000); + + ibm4xx_sdram_fixup_memsize(); + + dt_fixup_mac_addresses(bd.bi_enetaddr, bd.bi_enet1addr); + + ibm4xx_fixup_ebc_ranges("/plb/opb/ebc"); +} + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + CUBOOT_INIT(); + + platform_ops.fixups = taishan_fixups; + fdt_init(_dtb_start); + serial_console_init(); +} diff --git a/arch/powerpc/boot/cuboot-warp.c b/arch/powerpc/boot/cuboot-warp.c new file mode 100644 index 00000000000..bdedebe1bc1 --- /dev/null +++ b/arch/powerpc/boot/cuboot-warp.c @@ -0,0 +1,39 @@ +/* + * Copyright (c) 2008 PIKA Technologies + * Sean MacLennan <smaclennan@pikatech.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include "ops.h" +#include "4xx.h" +#include "cuboot.h" + +#define TARGET_44x +#include "ppcboot.h" + +static bd_t bd; + +static void warp_fixups(void) +{ + unsigned long sysclk = 66000000; + + ibm440ep_fixup_clocks(sysclk, 11059200, 50000000); + ibm4xx_sdram_fixup_memsize(); + ibm4xx_fixup_ebc_ranges("/plb/opb/ebc"); + dt_fixup_mac_addresses(&bd.bi_enetaddr); +} + + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + CUBOOT_INIT(); + + platform_ops.fixups = warp_fixups; + platform_ops.exit = ibm44x_dbcr_reset; + fdt_init(_dtb_start); + serial_console_init(); +} diff --git a/arch/powerpc/boot/dcr.h b/arch/powerpc/boot/dcr.h index 83b88aa9288..95b9f534401 100644 --- a/arch/powerpc/boot/dcr.h +++ b/arch/powerpc/boot/dcr.h @@ -14,12 +14,20 @@ #define DCRN_SDRAM0_CFGADDR 0x010 #define DCRN_SDRAM0_CFGDATA 0x011 +#define SDRAM0_READ(offset) ({\ + mtdcr(DCRN_SDRAM0_CFGADDR, offset); \ + mfdcr(DCRN_SDRAM0_CFGDATA); }) +#define SDRAM0_WRITE(offset, data) ({\ + mtdcr(DCRN_SDRAM0_CFGADDR, offset); \ + mtdcr(DCRN_SDRAM0_CFGDATA, data); }) + #define SDRAM0_B0CR 0x40 #define SDRAM0_B1CR 0x44 #define SDRAM0_B2CR 0x48 #define SDRAM0_B3CR 0x4c -static const unsigned long sdram_bxcr[] = { SDRAM0_B0CR, SDRAM0_B1CR, SDRAM0_B2CR, SDRAM0_B3CR }; +static const unsigned long sdram_bxcr[] = { SDRAM0_B0CR, SDRAM0_B1CR, + SDRAM0_B2CR, SDRAM0_B3CR }; #define SDRAM_CONFIG_BANK_ENABLE 0x00000001 #define SDRAM_CONFIG_SIZE_MASK 0x000e0000 @@ -138,5 +146,54 @@ static const unsigned long sdram_bxcr[] = { SDRAM0_B0CR, SDRAM0_B1CR, SDRAM0_B2C #define DCRN_CPC0_PLLMR 0xb0 #define DCRN_405_CPC0_CR0 0xb1 #define DCRN_405_CPC0_CR1 0xb2 +#define DCRN_405_CPC0_PSR 0xb4 + +/* 405EP Clocking/Power Management/Chip Control regs */ +#define DCRN_CPC0_PLLMR0 0xf0 +#define DCRN_CPC0_PLLMR1 0xf4 +#define DCRN_CPC0_UCR 0xf5 + +/* 440GX Clock control etc */ + + +#define DCRN_CPR0_CLKUPD 0x020 +#define DCRN_CPR0_PLLC 0x040 +#define DCRN_CPR0_PLLD 0x060 +#define DCRN_CPR0_PRIMAD 0x080 +#define DCRN_CPR0_PRIMBD 0x0a0 +#define DCRN_CPR0_OPBD 0x0c0 +#define DCRN_CPR0_PERD 0x0e0 +#define DCRN_CPR0_MALD 0x100 + +#define DCRN_SDR0_CONFIG_ADDR 0xe +#define DCRN_SDR0_CONFIG_DATA 0xf + +/* SDR read/write helper macros */ +#define SDR0_READ(offset) ({\ + mtdcr(DCRN_SDR0_CONFIG_ADDR, offset); \ + mfdcr(DCRN_SDR0_CONFIG_DATA); }) +#define SDR0_WRITE(offset, data) ({\ + mtdcr(DCRN_SDR0_CONFIG_ADDR, offset); \ + mtdcr(DCRN_SDR0_CONFIG_DATA, data); }) + +#define DCRN_SDR0_UART0 0x0120 +#define DCRN_SDR0_UART1 0x0121 +#define DCRN_SDR0_UART2 0x0122 +#define DCRN_SDR0_UART3 0x0123 + + +/* CPRs read/write helper macros - based off include/asm-ppc/ibm44x.h */ + +#define DCRN_CPR0_CFGADDR 0xc +#define DCRN_CPR0_CFGDATA 0xd + +#define CPR0_READ(offset) ({\ + mtdcr(DCRN_CPR0_CFGADDR, offset); \ + mfdcr(DCRN_CPR0_CFGDATA); }) +#define CPR0_WRITE(offset, data) ({\ + mtdcr(DCRN_CPR0_CFGADDR, offset); \ + mtdcr(DCRN_CPR0_CFGDATA, data); }) + + #endif /* _PPC_BOOT_DCR_H_ */ diff --git a/arch/powerpc/boot/devtree.c b/arch/powerpc/boot/devtree.c index e5dfe449731..60f561e307a 100644 --- a/arch/powerpc/boot/devtree.c +++ b/arch/powerpc/boot/devtree.c @@ -88,6 +88,20 @@ void dt_fixup_clock(const char *path, u32 freq) } } +void dt_fixup_mac_address_by_alias(const char *alias, const u8 *addr) +{ + void *devp = find_node_by_alias(alias); + + if (devp) { + printf("%s: local-mac-address <-" + " %02x:%02x:%02x:%02x:%02x:%02x\n\r", alias, + addr[0], addr[1], addr[2], + addr[3], addr[4], addr[5]); + + setprop(devp, "local-mac-address", addr, 6); + } +} + void dt_fixup_mac_address(u32 index, const u8 *addr) { void *devp = find_node_by_prop_value(NULL, "linux,network-index", diff --git a/arch/powerpc/boot/dtc-src/.gitignore b/arch/powerpc/boot/dtc-src/.gitignore new file mode 100644 index 00000000000..a7c3f94e5e7 --- /dev/null +++ b/arch/powerpc/boot/dtc-src/.gitignore @@ -0,0 +1,3 @@ +dtc-lexer.lex.c +dtc-parser.tab.c +dtc-parser.tab.h diff --git a/arch/powerpc/boot/dtc-src/Makefile.dtc b/arch/powerpc/boot/dtc-src/Makefile.dtc new file mode 100644 index 00000000000..d607fdb8df8 --- /dev/null +++ b/arch/powerpc/boot/dtc-src/Makefile.dtc @@ -0,0 +1,25 @@ +# Makefile.dtc +# +# This is not a complete Makefile of itself. Instead, it is designed to +# be easily embeddable into other systems of Makefiles. +# +DTC_SRCS = dtc.c flattree.c fstree.c data.c livetree.c treesource.c srcpos.c \ + checks.c +DTC_EXTRA = dtc.h srcpos.h +DTC_LEXFILES = dtc-lexer.l +DTC_BISONFILES = dtc-parser.y + +DTC_LEX_SRCS = $(DTC_LEXFILES:%.l=%.lex.c) +DTC_BISON_SRCS = $(DTC_BISONFILES:%.y=%.tab.c) +DTC_BISON_INCLUDES = $(DTC_BISONFILES:%.y=%.tab.h) + +DTC_GEN_SRCS = $(DTC_LEX_SRCS) $(DTC_BISON_SRCS) +DTC_GEN_ALL = $(DTC_GEN_SRCS) $(DTC_BISON_INCLUDES) +DTC_OBJS = $(DTC_SRCS:%.c=%.o) $(DTC_GEN_SRCS:%.c=%.o) + +DTC_CLEANFILES = $(DTC_GEN_ALL) + +# We assume the containing Makefile system can do auto-dependencies for most +# things, but we supply the dependencies on generated header files explicitly + +$(addprefix $(DTC_objdir)/,$(DTC_GEN_SRCS:%.c=%.o)): $(addprefix $(DTC_objdir)/,$(DTC_BISON_INCLUDES)) diff --git a/arch/powerpc/boot/dtc-src/checks.c b/arch/powerpc/boot/dtc-src/checks.c new file mode 100644 index 00000000000..2ce961cd414 --- /dev/null +++ b/arch/powerpc/boot/dtc-src/checks.c @@ -0,0 +1,750 @@ +/* + * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2007. + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + +#include "dtc.h" + +#ifdef TRACE_CHECKS +#define TRACE(c, ...) \ + do { \ + fprintf(stderr, "=== %s: ", (c)->name); \ + fprintf(stderr, __VA_ARGS__); \ + fprintf(stderr, "\n"); \ + } while (0) +#else +#define TRACE(c, fmt, ...) do { } while (0) +#endif + +enum checklevel { + IGNORE = 0, + WARN = 1, + ERROR = 2, +}; + +enum checkstatus { + UNCHECKED = 0, + PREREQ, + PASSED, + FAILED, +}; + +struct check; + +typedef void (*tree_check_fn)(struct check *c, struct node *dt); +typedef void (*node_check_fn)(struct check *c, struct node *dt, struct node *node); +typedef void (*prop_check_fn)(struct check *c, struct node *dt, + struct node *node, struct property *prop); + +struct check { + const char *name; + tree_check_fn tree_fn; + node_check_fn node_fn; + prop_check_fn prop_fn; + void *data; + enum checklevel level; + enum checkstatus status; + int inprogress; + int num_prereqs; + struct check **prereq; +}; + +#define CHECK(nm, tfn, nfn, pfn, d, lvl, ...) \ + static struct check *nm##_prereqs[] = { __VA_ARGS__ }; \ + static struct check nm = { \ + .name = #nm, \ + .tree_fn = (tfn), \ + .node_fn = (nfn), \ + .prop_fn = (pfn), \ + .data = (d), \ + .level = (lvl), \ + .status = UNCHECKED, \ + .num_prereqs = ARRAY_SIZE(nm##_prereqs), \ + .prereq = nm##_prereqs, \ + }; + +#define TREE_CHECK(nm, d, lvl, ...) \ + CHECK(nm, check_##nm, NULL, NULL, d, lvl, __VA_ARGS__) +#define NODE_CHECK(nm, d, lvl, ...) \ + CHECK(nm, NULL, check_##nm, NULL, d, lvl, __VA_ARGS__) +#define PROP_CHECK(nm, d, lvl, ...) \ + CHECK(nm, NULL, NULL, check_##nm, d, lvl, __VA_ARGS__) +#define BATCH_CHECK(nm, lvl, ...) \ + CHECK(nm, NULL, NULL, NULL, NULL, lvl, __VA_ARGS__) + +#ifdef __GNUC__ +static inline void check_msg(struct check *c, const char *fmt, ...) __attribute__((format (printf, 2, 3))); +#endif +static inline void check_msg(struct check *c, const char *fmt, ...) +{ + va_list ap; + va_start(ap, fmt); + + if ((c->level < WARN) || (c->level <= quiet)) + return; /* Suppress message */ + + fprintf(stderr, "%s (%s): ", + (c->level == ERROR) ? "ERROR" : "Warning", c->name); + vfprintf(stderr, fmt, ap); + fprintf(stderr, "\n"); +} + +#define FAIL(c, ...) \ + do { \ + TRACE((c), "\t\tFAILED at %s:%d", __FILE__, __LINE__); \ + (c)->status = FAILED; \ + check_msg((c), __VA_ARGS__); \ + } while (0) + +static void check_nodes_props(struct check *c, struct node *dt, struct node *node) +{ + struct node *child; + struct property *prop; + + TRACE(c, "%s", node->fullpath); + if (c->node_fn) + c->node_fn(c, dt, node); + + if (c->prop_fn) + for_each_property(node, prop) { + TRACE(c, "%s\t'%s'", node->fullpath, prop->name); + c->prop_fn(c, dt, node, prop); + } + + for_each_child(node, child) + check_nodes_props(c, dt, child); +} + +static int run_check(struct check *c, struct node *dt) +{ + int error = 0; + int i; + + assert(!c->inprogress); + + if (c->status != UNCHECKED) + goto out; + + c->inprogress = 1; + + for (i = 0; i < c->num_prereqs; i++) { + struct check *prq = c->prereq[i]; + error |= run_check(prq, dt); + if (prq->status != PASSED) { + c->status = PREREQ; + check_msg(c, "Failed prerequisite '%s'", + c->prereq[i]->name); + } + } + + if (c->status != UNCHECKED) + goto out; + + if (c->node_fn || c->prop_fn) + check_nodes_props(c, dt, dt); + + if (c->tree_fn) + c->tree_fn(c, dt); + if (c->status == UNCHECKED) + c->status = PASSED; + + TRACE(c, "\tCompleted, status %d", c->status); + +out: + c->inprogress = 0; + if ((c->status != PASSED) && (c->level == ERROR)) + error = 1; + return error; +} + +/* + * Utility check functions + */ + +static void check_is_string(struct check *c, struct node *root, + struct node *node) +{ + struct property *prop; + char *propname = c->data; + + prop = get_property(node, propname); + if (!prop) + return; /* Not present, assumed ok */ + + if (!data_is_one_string(prop->val)) + FAIL(c, "\"%s\" property in %s is not a string", + propname, node->fullpath); +} +#define CHECK_IS_STRING(nm, propname, lvl) \ + CHECK(nm, NULL, check_is_string, NULL, (propname), (lvl)) + +static void check_is_cell(struct check *c, struct node *root, + struct node *node) +{ + struct property *prop; + char *propname = c->data; + + prop = get_property(node, propname); + if (!prop) + return; /* Not present, assumed ok */ + + if (prop->val.len != sizeof(cell_t)) + FAIL(c, "\"%s\" property in %s is not a single cell", + propname, node->fullpath); +} +#define CHECK_IS_CELL(nm, propname, lvl) \ + CHECK(nm, NULL, check_is_cell, NULL, (propname), (lvl)) + +/* + * Structural check functions + */ + +static void check_duplicate_node_names(struct check *c, struct node *dt, + struct node *node) +{ + struct node *child, *child2; + + for_each_child(node, child) + for (child2 = child->next_sibling; + child2; + child2 = child2->next_sibling) + if (streq(child->name, child2->name)) + FAIL(c, "Duplicate node name %s", + child->fullpath); +} +NODE_CHECK(duplicate_node_names, NULL, ERROR); + +static void check_duplicate_property_names(struct check *c, struct node *dt, + struct node *node) +{ + struct property *prop, *prop2; + + for_each_property(node, prop) + for (prop2 = prop->next; prop2; prop2 = prop2->next) + if (streq(prop->name, prop2->name)) + FAIL(c, "Duplicate property name %s in %s", + prop->name, node->fullpath); +} +NODE_CHECK(duplicate_property_names, NULL, ERROR); + +static void check_explicit_phandles(struct check *c, struct node *root, + struct node *node) +{ + struct property *prop; + struct node *other; + cell_t phandle; + + prop = get_property(node, "linux,phandle"); + if (! prop) + return; /* No phandle, that's fine */ + + if (prop->val.len != sizeof(cell_t)) { + FAIL(c, "%s has bad length (%d) linux,phandle property", + node->fullpath, prop->val.len); + return; + } + + phandle = propval_cell(prop); + if ((phandle == 0) || (phandle == -1)) { + FAIL(c, "%s has invalid linux,phandle value 0x%x", + node->fullpath, phandle); + return; + } + + other = get_node_by_phandle(root, phandle); + if (other) { + FAIL(c, "%s has duplicated phandle 0x%x (seen before at %s)", + node->fullpath, phandle, other->fullpath); + return; + } + + node->phandle = phandle; +} +NODE_CHECK(explicit_phandles, NULL, ERROR); + +static void check_name_properties(struct check *c, struct node *root, + struct node *node) +{ + struct property *prop; + + prop = get_property(node, "name"); + if (!prop) + return; /* No name property, that's fine */ + + if ((prop->val.len != node->basenamelen+1) + || (memcmp(prop->val.val, node->name, node->basenamelen) != 0)) + FAIL(c, "\"name\" property in %s is incorrect (\"%s\" instead" + " of base node name)", node->fullpath, prop->val.val); +} +CHECK_IS_STRING(name_is_string, "name", ERROR); +NODE_CHECK(name_properties, NULL, ERROR, &name_is_string); + +/* + * Reference fixup functions + */ + +static void fixup_phandle_references(struct check *c, struct node *dt, + struct node *node, struct property *prop) +{ + struct marker *m = prop->val.markers; + struct node *refnode; + cell_t phandle; + + for_each_marker_of_type(m, REF_PHANDLE) { + assert(m->offset + sizeof(cell_t) <= prop->val.len); + + refnode = get_node_by_ref(dt, m->ref); + if (! refnode) { + FAIL(c, "Reference to non-existent node or label \"%s\"\n", + m->ref); + continue; + } + + phandle = get_node_phandle(dt, refnode); + *((cell_t *)(prop->val.val + m->offset)) = cpu_to_be32(phandle); + } +} +CHECK(phandle_references, NULL, NULL, fixup_phandle_references, NULL, ERROR, + &duplicate_node_names, &explicit_phandles); + +static void fixup_path_references(struct check *c, struct node *dt, + struct node *node, struct property *prop) +{ + struct marker *m = prop->val.markers; + struct node *refnode; + char *path; + + for_each_marker_of_type(m, REF_PATH) { + assert(m->offset <= prop->val.len); + + refnode = get_node_by_ref(dt, m->ref); + if (!refnode) { + FAIL(c, "Reference to non-existent node or label \"%s\"\n", + m->ref); + continue; + } + + path = refnode->fullpath; + prop->val = data_insert_at_marker(prop->val, m, path, + strlen(path) + 1); + } +} +CHECK(path_references, NULL, NULL, fixup_path_references, NULL, ERROR, + &duplicate_node_names); + +/* + * Semantic checks + */ +CHECK_IS_CELL(address_cells_is_cell, "#address-cells", WARN); +CHECK_IS_CELL(size_cells_is_cell, "#size-cells", WARN); +CHECK_IS_CELL(interrupt_cells_is_cell, "#interrupt-cells", WARN); + +CHECK_IS_STRING(device_type_is_string, "device_type", WARN); +CHECK_IS_STRING(model_is_string, "model", WARN); +CHECK_IS_STRING(status_is_string, "status", WARN); + +static void fixup_addr_size_cells(struct check *c, struct node *dt, + struct node *node) +{ + struct property *prop; + + node->addr_cells = -1; + node->size_cells = -1; + + prop = get_property(node, "#address-cells"); + if (prop) + node->addr_cells = propval_cell(prop); + + prop = get_property(node, "#size-cells"); + if (prop) + node->size_cells = propval_cell(prop); +} +CHECK(addr_size_cells, NULL, fixup_addr_size_cells, NULL, NULL, WARN, + &address_cells_is_cell, &size_cells_is_cell); + +#define node_addr_cells(n) \ + (((n)->addr_cells == -1) ? 2 : (n)->addr_cells) +#define node_size_cells(n) \ + (((n)->size_cells == -1) ? 1 : (n)->size_cells) + +static void check_reg_format(struct check *c, struct node *dt, + struct node *node) +{ + struct property *prop; + int addr_cells, size_cells, entrylen; + + prop = get_property(node, "reg"); + if (!prop) + return; /* No "reg", that's fine */ + + if (!node->parent) { + FAIL(c, "Root node has a \"reg\" property"); + return; + } + + if (prop->val.len == 0) + FAIL(c, "\"reg\" property in %s is empty", node->fullpath); + + addr_cells = node_addr_cells(node->parent); + size_cells = node_size_cells(node->parent); + entrylen = (addr_cells + size_cells) * sizeof(cell_t); + + if ((prop->val.len % entrylen) != 0) + FAIL(c, "\"reg\" property in %s has invalid length (%d bytes) " + "(#address-cells == %d, #size-cells == %d)", + node->fullpath, prop->val.len, addr_cells, size_cells); +} +NODE_CHECK(reg_format, NULL, WARN, &addr_size_cells); + +static void check_ranges_format(struct check *c, struct node *dt, + struct node *node) +{ + struct property *prop; + int c_addr_cells, p_addr_cells, c_size_cells, p_size_cells, entrylen; + + prop = get_property(node, "ranges"); + if (!prop) + return; + + if (!node->parent) { + FAIL(c, "Root node has a \"ranges\" property"); + return; + } + + p_addr_cells = node_addr_cells(node->parent); + p_size_cells = node_size_cells(node->parent); + c_addr_cells = node_addr_cells(node); + c_size_cells = node_size_cells(node); + entrylen = (p_addr_cells + c_addr_cells + c_size_cells) * sizeof(cell_t); + + if (prop->val.len == 0) { + if (p_addr_cells != c_addr_cells) + FAIL(c, "%s has empty \"ranges\" property but its " + "#address-cells (%d) differs from %s (%d)", + node->fullpath, c_addr_cells, node->parent->fullpath, + p_addr_cells); + if (p_size_cells != c_size_cells) + FAIL(c, "%s has empty \"ranges\" property but its " + "#size-cells (%d) differs from %s (%d)", + node->fullpath, c_size_cells, node->parent->fullpath, + p_size_cells); + } else if ((prop->val.len % entrylen) != 0) { + FAIL(c, "\"ranges\" property in %s has invalid length (%d bytes) " + "(parent #address-cells == %d, child #address-cells == %d, " + "#size-cells == %d)", node->fullpath, prop->val.len, + p_addr_cells, c_addr_cells, c_size_cells); + } +} +NODE_CHECK(ranges_format, NULL, WARN, &addr_size_cells); + +/* + * Style checks + */ +static void check_avoid_default_addr_size(struct check *c, struct node *dt, + struct node *node) +{ + struct property *reg, *ranges; + + if (!node->parent) + return; /* Ignore root node */ + + reg = get_property(node, "reg"); + ranges = get_property(node, "ranges"); + + if (!reg && !ranges) + return; + + if ((node->parent->addr_cells == -1)) + FAIL(c, "Relying on default #address-cells value for %s", + node->fullpath); + + if ((node->parent->size_cells == -1)) + FAIL(c, "Relying on default #size-cells value for %s", + node->fullpath); +} +NODE_CHECK(avoid_default_addr_size, NULL, WARN, &addr_size_cells); + +static void check_obsolete_chosen_interrupt_controller(struct check *c, + struct node *dt) +{ + struct node *chosen; + struct property *prop; + + chosen = get_node_by_path(dt, "/chosen"); + if (!chosen) + return; + + prop = get_property(chosen, "interrupt-controller"); + if (prop) + FAIL(c, "/chosen has obsolete \"interrupt-controller\" " + "property"); +} +TREE_CHECK(obsolete_chosen_interrupt_controller, NULL, WARN); + +static struct check *check_table[] = { + &duplicate_node_names, &duplicate_property_names, + &name_is_string, &name_properties, + &explicit_phandles, + &phandle_references, &path_references, + + &address_cells_is_cell, &size_cells_is_cell, &interrupt_cells_is_cell, + &device_type_is_string, &model_is_string, &status_is_string, + + &addr_size_cells, ®_format, &ranges_format, + + &avoid_default_addr_size, + &obsolete_chosen_interrupt_controller, +}; + +int check_semantics(struct node *dt, int outversion, int boot_cpuid_phys); + +void process_checks(int force, struct boot_info *bi, + int checkflag, int outversion, int boot_cpuid_phys) +{ + struct node *dt = bi->dt; + int i; + int error = 0; + + for (i = 0; i < ARRAY_SIZE(check_table); i++) { + struct check *c = check_table[i]; + + if (c->level != IGNORE) + error = error || run_check(c, dt); + } + + if (error) { + if (!force) { + fprintf(stderr, "ERROR: Input tree has errors, aborting " + "(use -f to force output)\n"); + exit(2); + } else if (quiet < 3) { + fprintf(stderr, "Warning: Input tree has errors, " + "output forced\n"); + } + } + + if (checkflag) { + if (error) { + fprintf(stderr, "Warning: Skipping semantic checks due to structural errors\n"); + } else { + if (!check_semantics(bi->dt, outversion, + boot_cpuid_phys)) + fprintf(stderr, "Warning: Input tree has semantic errors\n"); + } + } +} + +/* + * Semantic check functions + */ + +#define ERRMSG(...) if (quiet < 2) fprintf(stderr, "ERROR: " __VA_ARGS__) +#define WARNMSG(...) if (quiet < 1) fprintf(stderr, "Warning: " __VA_ARGS__) + +#define DO_ERR(...) do {ERRMSG(__VA_ARGS__); ok = 0; } while (0) + +#define CHECK_HAVE(node, propname) \ + do { \ + if (! (prop = get_property((node), (propname)))) \ + DO_ERR("Missing \"%s\" property in %s\n", (propname), \ + (node)->fullpath); \ + } while (0); + +#define CHECK_HAVE_WARN(node, propname) \ + do { \ + if (! (prop = get_property((node), (propname)))) \ + WARNMSG("%s has no \"%s\" property\n", \ + (node)->fullpath, (propname)); \ + } while (0) + +#define CHECK_HAVE_STRING(node, propname) \ + do { \ + CHECK_HAVE((node), (propname)); \ + if (prop && !data_is_one_string(prop->val)) \ + DO_ERR("\"%s\" property in %s is not a string\n", \ + (propname), (node)->fullpath); \ + } while (0) + +#define CHECK_HAVE_STREQ(node, propname, value) \ + do { \ + CHECK_HAVE_STRING((node), (propname)); \ + if (prop && !streq(prop->val.val, (value))) \ + DO_ERR("%s has wrong %s, %s (should be %s\n", \ + (node)->fullpath, (propname), \ + prop->val.val, (value)); \ + } while (0) + +#define CHECK_HAVE_ONECELL(node, propname) \ + do { \ + CHECK_HAVE((node), (propname)); \ + if (prop && (prop->val.len != sizeof(cell_t))) \ + DO_ERR("\"%s\" property in %s has wrong size %d (should be 1 cell)\n", (propname), (node)->fullpath, prop->val.len); \ + } while (0) + +#define CHECK_HAVE_WARN_ONECELL(node, propname) \ + do { \ + CHECK_HAVE_WARN((node), (propname)); \ + if (prop && (prop->val.len != sizeof(cell_t))) \ + DO_ERR("\"%s\" property in %s has wrong size %d (should be 1 cell)\n", (propname), (node)->fullpath, prop->val.len); \ + } while (0) + +#define CHECK_HAVE_WARN_PHANDLE(xnode, propname, root) \ + do { \ + struct node *ref; \ + CHECK_HAVE_WARN_ONECELL((xnode), (propname)); \ + if (prop) {\ + cell_t phandle = propval_cell(prop); \ + if ((phandle == 0) || (phandle == -1)) { \ + DO_ERR("\"%s\" property in %s contains an invalid phandle %x\n", (propname), (xnode)->fullpath, phandle); \ + } else { \ + ref = get_node_by_phandle((root), propval_cell(prop)); \ + if (! ref) \ + DO_ERR("\"%s\" property in %s refers to non-existant phandle %x\n", (propname), (xnode)->fullpath, propval_cell(prop)); \ + } \ + } \ + } while (0) + +#define CHECK_HAVE_WARN_STRING(node, propname) \ + do { \ + CHECK_HAVE_WARN((node), (propname)); \ + if (prop && !data_is_one_string(prop->val)) \ + DO_ERR("\"%s\" property in %s is not a string\n", \ + (propname), (node)->fullpath); \ + } while (0) + +static int check_root(struct node *root) +{ + struct property *prop; + int ok = 1; + + CHECK_HAVE_STRING(root, "model"); + CHECK_HAVE_WARN(root, "compatible"); + + return ok; +} + +static int check_cpus(struct node *root, int outversion, int boot_cpuid_phys) +{ + struct node *cpus, *cpu; + struct property *prop; + struct node *bootcpu = NULL; + int ok = 1; + + cpus = get_subnode(root, "cpus"); + if (! cpus) { + ERRMSG("Missing /cpus node\n"); + return 0; + } + + if (cpus->addr_cells != 1) + DO_ERR("%s has bad #address-cells value %d (should be 1)\n", + cpus->fullpath, cpus->addr_cells); + if (cpus->size_cells != 0) + DO_ERR("%s has bad #size-cells value %d (should be 0)\n", + cpus->fullpath, cpus->size_cells); + + for_each_child(cpus, cpu) { + CHECK_HAVE_STREQ(cpu, "device_type", "cpu"); + + CHECK_HAVE_ONECELL(cpu, "reg"); + if (prop) { + cell_t unitnum; + char *eptr; + + unitnum = strtol(get_unitname(cpu), &eptr, 16); + if (*eptr) { + WARNMSG("%s has bad format unit name %s (should be CPU number\n", + cpu->fullpath, get_unitname(cpu)); + } else if (unitnum != propval_cell(prop)) { + WARNMSG("%s unit name \"%s\" does not match \"reg\" property <%x>\n", + cpu->fullpath, get_unitname(cpu), + propval_cell(prop)); + } + } + +/* CHECK_HAVE_ONECELL(cpu, "d-cache-line-size"); */ +/* CHECK_HAVE_ONECELL(cpu, "i-cache-line-size"); */ + CHECK_HAVE_ONECELL(cpu, "d-cache-size"); + CHECK_HAVE_ONECELL(cpu, "i-cache-size"); + + CHECK_HAVE_WARN_ONECELL(cpu, "clock-frequency"); + CHECK_HAVE_WARN_ONECELL(cpu, "timebase-frequency"); + + prop = get_property(cpu, "linux,boot-cpu"); + if (prop) { + if (prop->val.len) + WARNMSG("\"linux,boot-cpu\" property in %s is non-empty\n", + cpu->fullpath); + if (bootcpu) + DO_ERR("Multiple boot cpus (%s and %s)\n", + bootcpu->fullpath, cpu->fullpath); + else + bootcpu = cpu; + } + } + + if (outversion < 2) { + if (! bootcpu) + WARNMSG("No cpu has \"linux,boot-cpu\" property\n"); + } else { + if (bootcpu) + WARNMSG("\"linux,boot-cpu\" property is deprecated in blob version 2 or higher\n"); + if (boot_cpuid_phys == 0xfeedbeef) + WARNMSG("physical boot CPU not set. Use -b option to set\n"); + } + + return ok; +} + +static int check_memory(struct node *root) +{ + struct node *mem; + struct property *prop; + int nnodes = 0; + int ok = 1; + + for_each_child(root, mem) { + if (! strneq(mem->name, "memory", mem->basenamelen)) + continue; + + nnodes++; + + CHECK_HAVE_STREQ(mem, "device_type", "memory"); + CHECK_HAVE(mem, "reg"); + } + + if (nnodes == 0) { + ERRMSG("No memory nodes\n"); + return 0; + } + + return ok; +} + +int check_semantics(struct node *dt, int outversion, int boot_cpuid_phys) +{ + int ok = 1; + + ok = ok && check_root(dt); + ok = ok && check_cpus(dt, outversion, boot_cpuid_phys); + ok = ok && check_memory(dt); + if (! ok) + return 0; + + return 1; +} diff --git a/arch/powerpc/boot/dtc-src/data.c b/arch/powerpc/boot/dtc-src/data.c new file mode 100644 index 00000000000..a94718c731a --- /dev/null +++ b/arch/powerpc/boot/dtc-src/data.c @@ -0,0 +1,321 @@ +/* + * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2005. + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + +#include "dtc.h" + +void data_free(struct data d) +{ + struct marker *m, *nm; + + m = d.markers; + while (m) { + nm = m->next; + free(m->ref); + free(m); + m = nm; + } + + assert(!d.val || d.asize); + + if (d.val) + free(d.val); +} + +struct data data_grow_for(struct data d, int xlen) +{ + struct data nd; + int newsize; + + /* we must start with an allocated datum */ + assert(!d.val || d.asize); + + if (xlen == 0) + return d; + + nd = d; + + newsize = xlen; + + while ((d.len + xlen) > newsize) + newsize *= 2; + + nd.asize = newsize; + nd.val = xrealloc(d.val, newsize); + + assert(nd.asize >= (d.len + xlen)); + + return nd; +} + +struct data data_copy_mem(const char *mem, int len) +{ + struct data d; + + d = data_grow_for(empty_data, len); + + d.len = len; + memcpy(d.val, mem, len); + + return d; +} + +static char get_oct_char(const char *s, int *i) +{ + char x[4]; + char *endx; + long val; + + x[3] = '\0'; + x[0] = s[(*i)]; + if (x[0]) { + x[1] = s[(*i)+1]; + if (x[1]) + x[2] = s[(*i)+2]; + } + + val = strtol(x, &endx, 8); + if ((endx - x) == 0) + fprintf(stderr, "Empty \\nnn escape\n"); + + (*i) += endx - x; + return val; +} + +static char get_hex_char(const char *s, int *i) +{ + char x[3]; + char *endx; + long val; + + x[2] = '\0'; + x[0] = s[(*i)]; + if (x[0]) + x[1] = s[(*i)+1]; + + val = strtol(x, &endx, 16); + if ((endx - x) == 0) + fprintf(stderr, "Empty \\x escape\n"); + + (*i) += endx - x; + return val; +} + +struct data data_copy_escape_string(const char *s, int len) +{ + int i = 0; + struct data d; + char *q; + + d = data_grow_for(empty_data, strlen(s)+1); + + q = d.val; + while (i < len) { + char c = s[i++]; + + if (c != '\\') { + q[d.len++] = c; + continue; + } + + c = s[i++]; + assert(c); + switch (c) { + case 'a': + q[d.len++] = '\a'; + break; + case 'b': + q[d.len++] = '\b'; + break; + case 't': + q[d.len++] = '\t'; + break; + case 'n': + q[d.len++] = '\n'; + break; + case 'v': + q[d.len++] = '\v'; + break; + case 'f': + q[d.len++] = '\f'; + break; + case 'r': + q[d.len++] = '\r'; + break; + case '0': + case '1': + case '2': + case '3': + case '4': + case '5': + case '6': + case '7': + i--; /* need to re-read the first digit as + * part of the octal value */ + q[d.len++] = get_oct_char(s, &i); + break; + case 'x': + q[d.len++] = get_hex_char(s, &i); + break; + default: + q[d.len++] = c; + } + } + + q[d.len++] = '\0'; + return d; +} + +struct data data_copy_file(FILE *f, size_t len) +{ + struct data d; + + d = data_grow_for(empty_data, len); + + d.len = len; + fread(d.val, len, 1, f); + + return d; +} + +struct data data_append_data(struct data d, const void *p, int len) +{ + d = data_grow_for(d, len); + memcpy(d.val + d.len, p, len); + d.len += len; + return d; +} + +struct data data_insert_at_marker(struct data d, struct marker *m, + const void *p, int len) +{ + d = data_grow_for(d, len); + memmove(d.val + m->offset + len, d.val + m->offset, d.len - m->offset); + memcpy(d.val + m->offset, p, len); + d.len += len; + + /* Adjust all markers after the one we're inserting at */ + m = m->next; + for_each_marker(m) + m->offset += len; + return d; +} + +struct data data_append_markers(struct data d, struct marker *m) +{ + struct marker **mp = &d.markers; + + /* Find the end of the markerlist */ + while (*mp) + mp = &((*mp)->next); + *mp = m; + return d; +} + +struct data data_merge(struct data d1, struct data d2) +{ + struct data d; + struct marker *m2 = d2.markers; + + d = data_append_markers(data_append_data(d1, d2.val, d2.len), m2); + + /* Adjust for the length of d1 */ + for_each_marker(m2) + m2->offset += d1.len; + + d2.markers = NULL; /* So data_free() doesn't clobber them */ + data_free(d2); + + return d; +} + +struct data data_append_cell(struct data d, cell_t word) +{ + cell_t beword = cpu_to_be32(word); + + return data_append_data(d, &beword, sizeof(beword)); +} + +struct data data_append_re(struct data d, const struct fdt_reserve_entry *re) +{ + struct fdt_reserve_entry bere; + + bere.address = cpu_to_be64(re->address); + bere.size = cpu_to_be64(re->size); + + return data_append_data(d, &bere, sizeof(bere)); +} + +struct data data_append_addr(struct data d, u64 addr) +{ + u64 beaddr = cpu_to_be64(addr); + + return data_append_data(d, &beaddr, sizeof(beaddr)); +} + +struct data data_append_byte(struct data d, uint8_t byte) +{ + return data_append_data(d, &byte, 1); +} + +struct data data_append_zeroes(struct data d, int len) +{ + d = data_grow_for(d, len); + + memset(d.val + d.len, 0, len); + d.len += len; + return d; +} + +struct data data_append_align(struct data d, int align) +{ + int newlen = ALIGN(d.len, align); + return data_append_zeroes(d, newlen - d.len); +} + +struct data data_add_marker(struct data d, enum markertype type, char *ref) +{ + struct marker *m; + + m = xmalloc(sizeof(*m)); + m->offset = d.len; + m->type = type; + m->ref = ref; + m->next = NULL; + + return data_append_markers(d, m); +} + +int data_is_one_string(struct data d) +{ + int i; + int len = d.len; + + if (len == 0) + return 0; + + for (i = 0; i < len-1; i++) + if (d.val[i] == '\0') + return 0; + + if (d.val[len-1] != '\0') + return 0; + + return 1; +} diff --git a/arch/powerpc/boot/dtc-src/dtc-lexer.l b/arch/powerpc/boot/dtc-src/dtc-lexer.l new file mode 100644 index 00000000000..c811b221b31 --- /dev/null +++ b/arch/powerpc/boot/dtc-src/dtc-lexer.l @@ -0,0 +1,328 @@ +/* + * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2005. + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + +%option noyywrap nounput yylineno + +%x INCLUDE +%x BYTESTRING +%x PROPNODENAME +%s V1 + +PROPNODECHAR [a-zA-Z0-9,._+*#?@-] +PATHCHAR ({PROPNODECHAR}|[/]) +LABEL [a-zA-Z_][a-zA-Z0-9_]* + +%{ +#include "dtc.h" +#include "srcpos.h" +#include "dtc-parser.tab.h" + + +/*#define LEXDEBUG 1*/ + +#ifdef LEXDEBUG +#define DPRINT(fmt, ...) fprintf(stderr, fmt, ##__VA_ARGS__) +#else +#define DPRINT(fmt, ...) do { } while (0) +#endif + +static int dts_version; /* = 0 */ + +#define BEGIN_DEFAULT() if (dts_version == 0) { \ + DPRINT("<INITIAL>\n"); \ + BEGIN(INITIAL); \ + } else { \ + DPRINT("<V1>\n"); \ + BEGIN(V1); \ + } +%} + +%% +<*>"/include/" BEGIN(INCLUDE); + +<INCLUDE>\"[^"\n]*\" { + yytext[strlen(yytext) - 1] = 0; + if (!push_input_file(yytext + 1)) { + /* Some unrecoverable error.*/ + exit(1); + } + BEGIN_DEFAULT(); + } + + +<*><<EOF>> { + if (!pop_input_file()) { + yyterminate(); + } + } + +<*>\"([^\\"]|\\.)*\" { + yylloc.filenum = srcpos_filenum; + yylloc.first_line = yylineno; + DPRINT("String: %s\n", yytext); + yylval.data = data_copy_escape_string(yytext+1, + yyleng-2); + yylloc.first_line = yylineno; + return DT_STRING; + } + +<*>"/dts-v1/" { + yylloc.filenum = srcpos_filenum; + yylloc.first_line = yylineno; + DPRINT("Keyword: /dts-v1/\n"); + dts_version = 1; + BEGIN_DEFAULT(); + return DT_V1; + } + +<*>"/memreserve/" { + yylloc.filenum = srcpos_filenum; + yylloc.first_line = yylineno; + DPRINT("Keyword: /memreserve/\n"); + BEGIN_DEFAULT(); + return DT_MEMRESERVE; + } + +<*>{LABEL}: { + yylloc.filenum = srcpos_filenum; + yylloc.first_line = yylineno; + DPRINT("Label: %s\n", yytext); + yylval.labelref = strdup(yytext); + yylval.labelref[yyleng-1] = '\0'; + return DT_LABEL; + } + +<INITIAL>[bodh]# { + yylloc.filenum = srcpos_filenum; + yylloc.first_line = yylineno; + if (*yytext == 'b') + yylval.cbase = 2; + else if (*yytext == 'o') + yylval.cbase = 8; + else if (*yytext == 'd') + yylval.cbase = 10; + else + yylval.cbase = 16; + DPRINT("Base: %d\n", yylval.cbase); + return DT_BASE; + } + +<INITIAL>[0-9a-fA-F]+ { + yylloc.filenum = srcpos_filenum; + yylloc.first_line = yylineno; + yylval.literal = strdup(yytext); + DPRINT("Literal: '%s'\n", yylval.literal); + return DT_LEGACYLITERAL; + } + +<V1>[0-9]+|0[xX][0-9a-fA-F]+ { + yylloc.filenum = srcpos_filenum; + yylloc.first_line = yylineno; + yylval.literal = strdup(yytext); + DPRINT("Literal: '%s'\n", yylval.literal); + return DT_LITERAL; + } + +\&{LABEL} { /* label reference */ + yylloc.filenum = srcpos_filenum; + yylloc.first_line = yylineno; + DPRINT("Ref: %s\n", yytext+1); + yylval.labelref = strdup(yytext+1); + return DT_REF; + } + +"&{/"{PATHCHAR}+\} { /* new-style path reference */ + yylloc.filenum = srcpos_filenum; + yylloc.first_line = yylineno; + yytext[yyleng-1] = '\0'; + DPRINT("Ref: %s\n", yytext+2); + yylval.labelref = strdup(yytext+2); + return DT_REF; + } + +<INITIAL>"&/"{PATHCHAR}+ { /* old-style path reference */ + yylloc.filenum = srcpos_filenum; + yylloc.first_line = yylineno; + DPRINT("Ref: %s\n", yytext+1); + yylval.labelref = strdup(yytext+1); + return DT_REF; + } + +<BYTESTRING>[0-9a-fA-F]{2} { + yylloc.filenum = srcpos_filenum; + yylloc.first_line = yylineno; + yylval.byte = strtol(yytext, NULL, 16); + DPRINT("Byte: %02x\n", (int)yylval.byte); + return DT_BYTE; + } + +<BYTESTRING>"]" { + yylloc.filenum = srcpos_filenum; + yylloc.first_line = yylineno; + DPRINT("/BYTESTRING\n"); + BEGIN_DEFAULT(); + return ']'; + } + +<PROPNODENAME>{PROPNODECHAR}+ { + yylloc.filenum = srcpos_filenum; + yylloc.first_line = yylineno; + DPRINT("PropNodeName: %s\n", yytext); + yylval.propnodename = strdup(yytext); + BEGIN_DEFAULT(); + return DT_PROPNODENAME; + } + + +<*>[[:space:]]+ /* eat whitespace */ + +<*>"/*"([^*]|\*+[^*/])*\*+"/" { + yylloc.filenum = srcpos_filenum; + yylloc.first_line = yylineno; + DPRINT("Comment: %s\n", yytext); + /* eat comments */ + } + +<*>"//".*\n /* eat line comments */ + +<*>. { + yylloc.filenum = srcpos_filenum; + yylloc.first_line = yylineno; + DPRINT("Char: %c (\\x%02x)\n", yytext[0], + (unsigned)yytext[0]); + if (yytext[0] == '[') { + DPRINT("<BYTESTRING>\n"); + BEGIN(BYTESTRING); + } + if ((yytext[0] == '{') + || (yytext[0] == ';')) { + DPRINT("<PROPNODENAME>\n"); + BEGIN(PROPNODENAME); + } + return yytext[0]; + } + +%% + + +/* + * Stack of nested include file contexts. + */ + +struct incl_file { + int filenum; + FILE *file; + YY_BUFFER_STATE yy_prev_buf; + int yy_prev_lineno; + struct incl_file *prev; +}; + +struct incl_file *incl_file_stack; + + +/* + * Detect infinite include recursion. + */ +#define MAX_INCLUDE_DEPTH (100) + +static int incl_depth = 0; + + +int push_input_file(const char *filename) +{ + FILE *f; + struct incl_file *incl_file; + + if (!filename) { + yyerror("No include file name given."); + return 0; + } + + if (incl_depth++ >= MAX_INCLUDE_DEPTH) { + yyerror("Includes nested too deeply"); + return 0; + } + + f = dtc_open_file(filename); + + incl_file = malloc(sizeof(struct incl_file)); + if (!incl_file) { + yyerror("Can not allocate include file space."); + return 0; + } + + /* + * Save current context. + */ + incl_file->yy_prev_buf = YY_CURRENT_BUFFER; + incl_file->yy_prev_lineno = yylineno; + incl_file->filenum = srcpos_filenum; + incl_file->file = yyin; + incl_file->prev = incl_file_stack; + + incl_file_stack = incl_file; + + /* + * Establish new context. + */ + srcpos_filenum = lookup_file_name(filename, 0); + yylineno = 1; + yyin = f; + yy_switch_to_buffer(yy_create_buffer(yyin, YY_BUF_SIZE)); + + return 1; +} + + +int pop_input_file(void) +{ + struct incl_file *incl_file; + + if (incl_file_stack == 0) + return 0; + + fclose(yyin); + + /* + * Pop. + */ + --incl_depth; + incl_file = incl_file_stack; + incl_file_stack = incl_file->prev; + + /* + * Recover old context. + */ + yy_delete_buffer(YY_CURRENT_BUFFER); + yy_switch_to_buffer(incl_file->yy_prev_buf); + yylineno = incl_file->yy_prev_lineno; + srcpos_filenum = incl_file->filenum; + yyin = incl_file->file; + + /* + * Free old state. + */ + free(incl_file); + + if (YY_CURRENT_BUFFER == 0) + return 0; + + return 1; +} diff --git a/arch/powerpc/boot/dtc-src/dtc-lexer.lex.c_shipped b/arch/powerpc/boot/dtc-src/dtc-lexer.lex.c_shipped new file mode 100644 index 00000000000..d0f742460f9 --- /dev/null +++ b/arch/powerpc/boot/dtc-src/dtc-lexer.lex.c_shipped @@ -0,0 +1,2174 @@ +#line 2 "dtc-lexer.lex.c" + +#line 4 "dtc-lexer.lex.c" + +#define YY_INT_ALIGNED short int + +/* A lexical scanner generated by flex */ + +#define FLEX_SCANNER +#define YY_FLEX_MAJOR_VERSION 2 +#define YY_FLEX_MINOR_VERSION 5 +#define YY_FLEX_SUBMINOR_VERSION 33 +#if YY_FLEX_SUBMINOR_VERSION > 0 +#define FLEX_BETA +#endif + +/* First, we deal with platform-specific or compiler-specific issues. */ + +/* begin standard C headers. */ +#include <stdio.h> +#include <string.h> +#include <errno.h> +#include <stdlib.h> + +/* end standard C headers. */ + +/* flex integer type definitions */ + +#ifndef FLEXINT_H +#define FLEXINT_H + +/* C99 systems have <inttypes.h>. Non-C99 systems may or may not. */ + +#if __STDC_VERSION__ >= 199901L + +/* C99 says to define __STDC_LIMIT_MACROS before including stdint.h, + * if you want the limit (max/min) macros for int types. + */ +#ifndef __STDC_LIMIT_MACROS +#define __STDC_LIMIT_MACROS 1 +#endif + +#include <inttypes.h> +typedef int8_t flex_int8_t; +typedef uint8_t flex_uint8_t; +typedef int16_t flex_int16_t; +typedef uint16_t flex_uint16_t; +typedef int32_t flex_int32_t; +typedef uint32_t flex_uint32_t; +#else +typedef signed char flex_int8_t; +typedef short int flex_int16_t; +typedef int flex_int32_t; +typedef unsigned char flex_uint8_t; +typedef unsigned short int flex_uint16_t; +typedef unsigned int flex_uint32_t; +#endif /* ! C99 */ + +/* Limits of integral types. */ +#ifndef INT8_MIN +#define INT8_MIN (-128) +#endif +#ifndef INT16_MIN +#define INT16_MIN (-32767-1) +#endif +#ifndef INT32_MIN +#define INT32_MIN (-2147483647-1) +#endif +#ifndef INT8_MAX +#define INT8_MAX (127) +#endif +#ifndef INT16_MAX +#define INT16_MAX (32767) +#endif +#ifndef INT32_MAX +#define INT32_MAX (2147483647) +#endif +#ifndef UINT8_MAX +#define UINT8_MAX (255U) +#endif +#ifndef UINT16_MAX +#define UINT16_MAX (65535U) +#endif +#ifndef UINT32_MAX +#define UINT32_MAX (4294967295U) +#endif + +#endif /* ! FLEXINT_H */ + +#ifdef __cplusplus + +/* The "const" storage-class-modifier is valid. */ +#define YY_USE_CONST + +#else /* ! __cplusplus */ + +#if __STDC__ + +#define YY_USE_CONST + +#endif /* __STDC__ */ +#endif /* ! __cplusplus */ + +#ifdef YY_USE_CONST +#define yyconst const +#else +#define yyconst +#endif + +/* Returned upon end-of-file. */ +#define YY_NULL 0 + +/* Promotes a possibly negative, possibly signed char to an unsigned + * integer for use as an array index. If the signed char is negative, + * we want to instead treat it as an 8-bit unsigned char, hence the + * double cast. + */ +#define YY_SC_TO_UI(c) ((unsigned int) (unsigned char) c) + +/* Enter a start condition. This macro really ought to take a parameter, + * but we do it the disgusting crufty way forced on us by the ()-less + * definition of BEGIN. + */ +#define BEGIN (yy_start) = 1 + 2 * + +/* Translate the current start state into a value that can be later handed + * to BEGIN to return to the state. The YYSTATE alias is for lex + * compatibility. + */ +#define YY_START (((yy_start) - 1) / 2) +#define YYSTATE YY_START + +/* Action number for EOF rule of a given start state. */ +#define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1) + +/* Special action meaning "start processing a new file". */ +#define YY_NEW_FILE yyrestart(yyin ) + +#define YY_END_OF_BUFFER_CHAR 0 + +/* Size of default input buffer. */ +#ifndef YY_BUF_SIZE +#define YY_BUF_SIZE 16384 +#endif + +/* The state buf must be large enough to hold one state per character in the main buffer. + */ +#define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type)) + +#ifndef YY_TYPEDEF_YY_BUFFER_STATE +#define YY_TYPEDEF_YY_BUFFER_STATE +typedef struct yy_buffer_state *YY_BUFFER_STATE; +#endif + +extern int yyleng; + +extern FILE *yyin, *yyout; + +#define EOB_ACT_CONTINUE_SCAN 0 +#define EOB_ACT_END_OF_FILE 1 +#define EOB_ACT_LAST_MATCH 2 + + /* Note: We specifically omit the test for yy_rule_can_match_eol because it requires + * access to the local variable yy_act. Since yyless() is a macro, it would break + * existing scanners that call yyless() from OUTSIDE yylex. + * One obvious solution it to make yy_act a global. I tried that, and saw + * a 5% performance hit in a non-yylineno scanner, because yy_act is + * normally declared as a register variable-- so it is not worth it. + */ + #define YY_LESS_LINENO(n) \ + do { \ + int yyl;\ + for ( yyl = n; yyl < yyleng; ++yyl )\ + if ( yytext[yyl] == '\n' )\ + --yylineno;\ + }while(0) + +/* Return all but the first "n" matched characters back to the input stream. */ +#define yyless(n) \ + do \ + { \ + /* Undo effects of setting up yytext. */ \ + int yyless_macro_arg = (n); \ + YY_LESS_LINENO(yyless_macro_arg);\ + *yy_cp = (yy_hold_char); \ + YY_RESTORE_YY_MORE_OFFSET \ + (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \ + YY_DO_BEFORE_ACTION; /* set up yytext again */ \ + } \ + while ( 0 ) + +#define unput(c) yyunput( c, (yytext_ptr) ) + +/* The following is because we cannot portably get our hands on size_t + * (without autoconf's help, which isn't available because we want + * flex-generated scanners to compile on their own). + */ + +#ifndef YY_TYPEDEF_YY_SIZE_T +#define YY_TYPEDEF_YY_SIZE_T +typedef unsigned int yy_size_t; +#endif + +#ifndef YY_STRUCT_YY_BUFFER_STATE +#define YY_STRUCT_YY_BUFFER_STATE +struct yy_buffer_state + { + FILE *yy_input_file; + + char *yy_ch_buf; /* input buffer */ + char *yy_buf_pos; /* current position in input buffer */ + + /* Size of input buffer in bytes, not including room for EOB + * characters. + */ + yy_size_t yy_buf_size; + + /* Number of characters read into yy_ch_buf, not including EOB + * characters. + */ + int yy_n_chars; + + /* Whether we "own" the buffer - i.e., we know we created it, + * and can realloc() it to grow it, and should free() it to + * delete it. + */ + int yy_is_our_buffer; + + /* Whether this is an "interactive" input source; if so, and + * if we're using stdio for input, then we want to use getc() + * instead of fread(), to make sure we stop fetching input after + * each newline. + */ + int yy_is_interactive; + + /* Whether we're considered to be at the beginning of a line. + * If so, '^' rules will be active on the next match, otherwise + * not. + */ + int yy_at_bol; + + int yy_bs_lineno; /**< The line count. */ + int yy_bs_column; /**< The column count. */ + + /* Whether to try to fill the input buffer when we reach the + * end of it. + */ + int yy_fill_buffer; + + int yy_buffer_status; + +#define YY_BUFFER_NEW 0 +#define YY_BUFFER_NORMAL 1 + /* When an EOF's been seen but there's still some text to process + * then we mark the buffer as YY_EOF_PENDING, to indicate that we + * shouldn't try reading from the input source any more. We might + * still have a bunch of tokens to match, though, because of + * possible backing-up. + * + * When we actually see the EOF, we change the status to "new" + * (via yyrestart()), so that the user can continue scanning by + * just pointing yyin at a new input file. + */ +#define YY_BUFFER_EOF_PENDING 2 + + }; +#endif /* !YY_STRUCT_YY_BUFFER_STATE */ + +/* Stack of input buffers. */ +static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */ +static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */ +static YY_BUFFER_STATE * yy_buffer_stack = 0; /**< Stack as an array. */ + +/* We provide macros for accessing buffer states in case in the + * future we want to put the buffer states in a more general + * "scanner state". + * + * Returns the top of the stack, or NULL. + */ +#define YY_CURRENT_BUFFER ( (yy_buffer_stack) \ + ? (yy_buffer_stack)[(yy_buffer_stack_top)] \ + : NULL) + +/* Same as previous macro, but useful when we know that the buffer stack is not + * NULL or when we need an lvalue. For internal use only. + */ +#define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)] + +/* yy_hold_char holds the character lost when yytext is formed. */ +static char yy_hold_char; +static int yy_n_chars; /* number of characters read into yy_ch_buf */ +int yyleng; + +/* Points to current character in buffer. */ +static char *yy_c_buf_p = (char *) 0; +static int yy_init = 0; /* whether we need to initialize */ +static int yy_start = 0; /* start state number */ + +/* Flag which is used to allow yywrap()'s to do buffer switches + * instead of setting up a fresh yyin. A bit of a hack ... + */ +static int yy_did_buffer_switch_on_eof; + +void yyrestart (FILE *input_file ); +void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer ); +YY_BUFFER_STATE yy_create_buffer (FILE *file,int size ); +void yy_delete_buffer (YY_BUFFER_STATE b ); +void yy_flush_buffer (YY_BUFFER_STATE b ); +void yypush_buffer_state (YY_BUFFER_STATE new_buffer ); +void yypop_buffer_state (void ); + +static void yyensure_buffer_stack (void ); +static void yy_load_buffer_state (void ); +static void yy_init_buffer (YY_BUFFER_STATE b,FILE *file ); + +#define YY_FLUSH_BUFFER yy_flush_buffer(YY_CURRENT_BUFFER ) + +YY_BUFFER_STATE yy_scan_buffer (char *base,yy_size_t size ); +YY_BUFFER_STATE yy_scan_string (yyconst char *yy_str ); +YY_BUFFER_STATE yy_scan_bytes (yyconst char *bytes,int len ); + +void *yyalloc (yy_size_t ); +void *yyrealloc (void *,yy_size_t ); +void yyfree (void * ); + +#define yy_new_buffer yy_create_buffer + +#define yy_set_interactive(is_interactive) \ + { \ + if ( ! YY_CURRENT_BUFFER ){ \ + yyensure_buffer_stack (); \ + YY_CURRENT_BUFFER_LVALUE = \ + yy_create_buffer(yyin,YY_BUF_SIZE ); \ + } \ + YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \ + } + +#define yy_set_bol(at_bol) \ + { \ + if ( ! YY_CURRENT_BUFFER ){\ + yyensure_buffer_stack (); \ + YY_CURRENT_BUFFER_LVALUE = \ + yy_create_buffer(yyin,YY_BUF_SIZE ); \ + } \ + YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \ + } + +#define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol) + +/* Begin user sect3 */ + +#define yywrap() 1 +#define YY_SKIP_YYWRAP + +typedef unsigned char YY_CHAR; + +FILE *yyin = (FILE *) 0, *yyout = (FILE *) 0; + +typedef int yy_state_type; + +extern int yylineno; + +int yylineno = 1; + +extern char *yytext; +#define yytext_ptr yytext + +static yy_state_type yy_get_previous_state (void ); +static yy_state_type yy_try_NUL_trans (yy_state_type current_state ); +static int yy_get_next_buffer (void ); +static void yy_fatal_error (yyconst char msg[] ); + +/* Done after the current pattern has been matched and before the + * corresponding action - sets up yytext. + */ +#define YY_DO_BEFORE_ACTION \ + (yytext_ptr) = yy_bp; \ + yyleng = (size_t) (yy_cp - yy_bp); \ + (yy_hold_char) = *yy_cp; \ + *yy_cp = '\0'; \ + (yy_c_buf_p) = yy_cp; + +#define YY_NUM_RULES 20 +#define YY_END_OF_BUFFER 21 +/* This struct is not used in this scanner, + but its presence is necessary. */ +struct yy_trans_info + { + flex_int32_t yy_verify; + flex_int32_t yy_nxt; + }; +static yyconst flex_int16_t yy_accept[94] = + { 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 21, 19, 16, 16, 19, 19, 19, 8, 8, 19, + 8, 19, 19, 19, 19, 14, 15, 15, 19, 9, + 9, 16, 0, 3, 0, 0, 10, 0, 0, 0, + 0, 0, 0, 8, 8, 6, 0, 7, 0, 2, + 0, 13, 13, 15, 15, 9, 0, 12, 10, 0, + 0, 0, 0, 18, 0, 0, 0, 2, 9, 0, + 17, 0, 0, 0, 11, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 4, 0, 0, 1, 0, 0, + 0, 5, 0 + + } ; + +static yyconst flex_int32_t yy_ec[256] = + { 0, + 1, 1, 1, 1, 1, 1, 1, 1, 2, 3, + 2, 2, 2, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 2, 1, 4, 5, 1, 1, 6, 1, 1, + 1, 7, 8, 8, 9, 8, 10, 11, 12, 13, + 13, 13, 13, 13, 13, 13, 13, 14, 1, 1, + 1, 1, 8, 8, 15, 15, 15, 15, 15, 15, + 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, + 16, 16, 16, 16, 16, 16, 16, 17, 16, 16, + 1, 18, 19, 1, 16, 1, 15, 20, 21, 22, + + 23, 15, 16, 24, 25, 16, 16, 26, 27, 28, + 24, 16, 16, 29, 30, 31, 32, 33, 16, 17, + 16, 16, 34, 1, 35, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1 + } ; + +static yyconst flex_int32_t yy_meta[36] = + { 0, + 1, 1, 1, 1, 2, 1, 2, 2, 2, 3, + 4, 4, 4, 5, 6, 7, 7, 1, 1, 6, + 6, 6, 6, 7, 7, 7, 7, 7, 7, 7, + 7, 7, 7, 8, 1 + } ; + +static yyconst flex_int16_t yy_base[107] = + { 0, + 0, 0, 32, 0, 53, 0, 76, 0, 108, 111, + 280, 288, 37, 39, 33, 36, 106, 0, 123, 146, + 255, 251, 45, 0, 159, 288, 0, 53, 108, 172, + 114, 127, 158, 288, 245, 0, 0, 234, 235, 236, + 197, 195, 199, 0, 0, 288, 0, 288, 160, 288, + 183, 288, 0, 0, 183, 182, 0, 0, 0, 0, + 204, 189, 207, 288, 179, 187, 180, 194, 0, 171, + 288, 196, 178, 174, 288, 169, 169, 177, 165, 153, + 143, 155, 137, 118, 288, 122, 42, 288, 36, 36, + 40, 288, 288, 212, 218, 223, 229, 234, 239, 245, + + 251, 255, 262, 270, 275, 280 + } ; + +static yyconst flex_int16_t yy_def[107] = + { 0, + 93, 1, 1, 3, 3, 5, 93, 7, 3, 3, + 93, 93, 93, 93, 94, 95, 93, 96, 93, 19, + 19, 20, 97, 98, 20, 93, 99, 100, 95, 93, + 93, 93, 94, 93, 94, 101, 102, 93, 103, 104, + 93, 93, 93, 96, 19, 93, 20, 93, 97, 93, + 97, 93, 20, 99, 100, 93, 105, 101, 102, 106, + 103, 103, 104, 93, 93, 93, 93, 94, 105, 106, + 93, 93, 93, 93, 93, 93, 93, 93, 93, 93, + 93, 93, 93, 93, 93, 93, 93, 93, 93, 93, + 93, 93, 0, 93, 93, 93, 93, 93, 93, 93, + + 93, 93, 93, 93, 93, 93 + } ; + +static yyconst flex_int16_t yy_nxt[324] = + { 0, + 12, 13, 14, 15, 12, 16, 12, 12, 12, 17, + 18, 18, 18, 12, 19, 20, 20, 12, 12, 21, + 19, 21, 19, 22, 20, 20, 20, 20, 20, 20, + 20, 20, 20, 12, 12, 23, 34, 12, 32, 32, + 32, 32, 12, 12, 12, 36, 20, 33, 50, 92, + 35, 20, 20, 20, 20, 20, 15, 54, 91, 54, + 54, 54, 51, 24, 24, 24, 46, 25, 90, 38, + 89, 26, 25, 25, 25, 25, 12, 13, 14, 15, + 27, 12, 27, 27, 27, 17, 27, 27, 27, 12, + 28, 28, 28, 12, 12, 28, 28, 28, 28, 28, + + 28, 28, 28, 28, 28, 28, 28, 28, 28, 12, + 12, 15, 39, 29, 15, 40, 29, 93, 30, 31, + 31, 30, 31, 31, 56, 56, 56, 41, 32, 32, + 42, 88, 43, 45, 45, 45, 46, 45, 47, 47, + 87, 38, 45, 45, 45, 45, 47, 47, 47, 47, + 47, 47, 47, 47, 47, 47, 47, 47, 47, 86, + 47, 34, 33, 50, 85, 47, 47, 47, 47, 53, + 53, 53, 84, 53, 83, 35, 82, 51, 53, 53, + 53, 53, 56, 56, 56, 93, 68, 54, 57, 54, + 54, 54, 56, 56, 56, 62, 46, 34, 71, 81, + + 80, 79, 78, 77, 76, 75, 74, 73, 72, 64, + 62, 35, 33, 33, 33, 33, 33, 33, 33, 33, + 37, 67, 66, 37, 37, 37, 44, 65, 44, 49, + 49, 49, 49, 49, 49, 49, 49, 52, 64, 52, + 54, 62, 54, 60, 54, 54, 55, 93, 55, 55, + 55, 55, 58, 58, 58, 48, 58, 58, 59, 48, + 59, 59, 61, 61, 61, 61, 61, 61, 61, 61, + 63, 63, 63, 63, 63, 63, 63, 63, 69, 93, + 69, 70, 70, 70, 93, 70, 70, 11, 93, 93, + 93, 93, 93, 93, 93, 93, 93, 93, 93, 93, + + 93, 93, 93, 93, 93, 93, 93, 93, 93, 93, + 93, 93, 93, 93, 93, 93, 93, 93, 93, 93, + 93, 93, 93 + } ; + +static yyconst flex_int16_t yy_chk[324] = + { 0, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 3, 15, 3, 13, 13, + 14, 14, 3, 3, 3, 16, 3, 23, 23, 91, + 15, 3, 3, 3, 3, 3, 5, 28, 90, 28, + 28, 28, 23, 5, 5, 5, 28, 5, 89, 16, + 87, 5, 5, 5, 5, 5, 7, 7, 7, 7, + 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, + 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, + + 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, + 7, 9, 17, 9, 10, 17, 10, 29, 9, 9, + 9, 10, 10, 10, 31, 31, 31, 17, 32, 32, + 17, 86, 17, 19, 19, 19, 19, 19, 19, 19, + 84, 29, 19, 19, 19, 19, 19, 19, 19, 19, + 19, 19, 19, 19, 19, 19, 20, 20, 20, 83, + 20, 33, 49, 49, 82, 20, 20, 20, 20, 25, + 25, 25, 81, 25, 80, 33, 79, 49, 25, 25, + 25, 25, 30, 30, 30, 51, 51, 55, 30, 55, + 55, 55, 56, 56, 56, 62, 55, 68, 62, 78, + + 77, 76, 74, 73, 72, 70, 67, 66, 65, 63, + 61, 68, 94, 94, 94, 94, 94, 94, 94, 94, + 95, 43, 42, 95, 95, 95, 96, 41, 96, 97, + 97, 97, 97, 97, 97, 97, 97, 98, 40, 98, + 99, 39, 99, 38, 99, 99, 100, 35, 100, 100, + 100, 100, 101, 101, 101, 22, 101, 101, 102, 21, + 102, 102, 103, 103, 103, 103, 103, 103, 103, 103, + 104, 104, 104, 104, 104, 104, 104, 104, 105, 11, + 105, 106, 106, 106, 0, 106, 106, 93, 93, 93, + 93, 93, 93, 93, 93, 93, 93, 93, 93, 93, + + 93, 93, 93, 93, 93, 93, 93, 93, 93, 93, + 93, 93, 93, 93, 93, 93, 93, 93, 93, 93, + 93, 93, 93 + } ; + +/* Table of booleans, true if rule could match eol. */ +static yyconst flex_int32_t yy_rule_can_match_eol[21] = + { 0, +0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, + 0, }; + +static yy_state_type yy_last_accepting_state; +static char *yy_last_accepting_cpos; + +extern int yy_flex_debug; +int yy_flex_debug = 0; + +/* The intent behind this definition is that it'll catch + * any uses of REJECT which flex missed. + */ +#define REJECT reject_used_but_not_detected +#define yymore() yymore_used_but_not_detected +#define YY_MORE_ADJ 0 +#define YY_RESTORE_YY_MORE_OFFSET +char *yytext; +#line 1 "dtc-lexer.l" +/* + * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2005. + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + + + + +#line 33 "dtc-lexer.l" +#include "dtc.h" +#include "srcpos.h" +#include "dtc-parser.tab.h" + + +/*#define LEXDEBUG 1*/ + +#ifdef LEXDEBUG +#define DPRINT(fmt, ...) fprintf(stderr, fmt, ##__VA_ARGS__) +#else +#define DPRINT(fmt, ...) do { } while (0) +#endif + +static int dts_version; /* = 0 */ + +#define BEGIN_DEFAULT() if (dts_version == 0) { \ + DPRINT("<INITIAL>\n"); \ + BEGIN(INITIAL); \ + } else { \ + DPRINT("<V1>\n"); \ + BEGIN(V1); \ + } +#line 627 "dtc-lexer.lex.c" + +#define INITIAL 0 +#define INCLUDE 1 +#define BYTESTRING 2 +#define PROPNODENAME 3 +#define V1 4 + +#ifndef YY_NO_UNISTD_H +/* Special case for "unistd.h", since it is non-ANSI. We include it way + * down here because we want the user's section 1 to have been scanned first. + * The user has a chance to override it with an option. + */ +#include <unistd.h> +#endif + +#ifndef YY_EXTRA_TYPE +#define YY_EXTRA_TYPE void * +#endif + +static int yy_init_globals (void ); + +/* Macros after this point can all be overridden by user definitions in + * section 1. + */ + +#ifndef YY_SKIP_YYWRAP +#ifdef __cplusplus +extern "C" int yywrap (void ); +#else +extern int yywrap (void ); +#endif +#endif + +#ifndef yytext_ptr +static void yy_flex_strncpy (char *,yyconst char *,int ); +#endif + +#ifdef YY_NEED_STRLEN +static int yy_flex_strlen (yyconst char * ); +#endif + +#ifndef YY_NO_INPUT + +#ifdef __cplusplus +static int yyinput (void ); +#else +static int input (void ); +#endif + +#endif + +/* Amount of stuff to slurp up with each read. */ +#ifndef YY_READ_BUF_SIZE +#define YY_READ_BUF_SIZE 8192 +#endif + +/* Copy whatever the last rule matched to the standard output. */ +#ifndef ECHO +/* This used to be an fputs(), but since the string might contain NUL's, + * we now use fwrite(). + */ +#define ECHO (void) fwrite( yytext, yyleng, 1, yyout ) +#endif + +/* Gets input and stuffs it into "buf". number of characters read, or YY_NULL, + * is returned in "result". + */ +#ifndef YY_INPUT +#define YY_INPUT(buf,result,max_size) \ + if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \ + { \ + int c = '*'; \ + size_t n; \ + for ( n = 0; n < max_size && \ + (c = getc( yyin )) != EOF && c != '\n'; ++n ) \ + buf[n] = (char) c; \ + if ( c == '\n' ) \ + buf[n++] = (char) c; \ + if ( c == EOF && ferror( yyin ) ) \ + YY_FATAL_ERROR( "input in flex scanner failed" ); \ + result = n; \ + } \ + else \ + { \ + errno=0; \ + while ( (result = fread(buf, 1, max_size, yyin))==0 && ferror(yyin)) \ + { \ + if( errno != EINTR) \ + { \ + YY_FATAL_ERROR( "input in flex scanner failed" ); \ + break; \ + } \ + errno=0; \ + clearerr(yyin); \ + } \ + }\ +\ + +#endif + +/* No semi-colon after return; correct usage is to write "yyterminate();" - + * we don't want an extra ';' after the "return" because that will cause + * some compilers to complain about unreachable statements. + */ +#ifndef yyterminate +#define yyterminate() return YY_NULL +#endif + +/* Number of entries by which start-condition stack grows. */ +#ifndef YY_START_STACK_INCR +#define YY_START_STACK_INCR 25 +#endif + +/* Report a fatal error. */ +#ifndef YY_FATAL_ERROR +#define YY_FATAL_ERROR(msg) yy_fatal_error( msg ) +#endif + +/* end tables serialization structures and prototypes */ + +/* Default declaration of generated scanner - a define so the user can + * easily add parameters. + */ +#ifndef YY_DECL +#define YY_DECL_IS_OURS 1 + +extern int yylex (void); + +#define YY_DECL int yylex (void) +#endif /* !YY_DECL */ + +/* Code executed at the beginning of each rule, after yytext and yyleng + * have been set up. + */ +#ifndef YY_USER_ACTION +#define YY_USER_ACTION +#endif + +/* Code executed at the end of each rule. */ +#ifndef YY_BREAK +#define YY_BREAK break; +#endif + +#define YY_RULE_SETUP \ + YY_USER_ACTION + +/** The main scanner function which does all the work. + */ +YY_DECL +{ + register yy_state_type yy_current_state; + register char *yy_cp, *yy_bp; + register int yy_act; + +#line 57 "dtc-lexer.l" + +#line 784 "dtc-lexer.lex.c" + + if ( !(yy_init) ) + { + (yy_init) = 1; + +#ifdef YY_USER_INIT + YY_USER_INIT; +#endif + + if ( ! (yy_start) ) + (yy_start) = 1; /* first start state */ + + if ( ! yyin ) + yyin = stdin; + + if ( ! yyout ) + yyout = stdout; + + if ( ! YY_CURRENT_BUFFER ) { + yyensure_buffer_stack (); + YY_CURRENT_BUFFER_LVALUE = + yy_create_buffer(yyin,YY_BUF_SIZE ); + } + + yy_load_buffer_state( ); + } + + while ( 1 ) /* loops until end-of-file is reached */ + { + yy_cp = (yy_c_buf_p); + + /* Support of yytext. */ + *yy_cp = (yy_hold_char); + + /* yy_bp points to the position in yy_ch_buf of the start of + * the current run. + */ + yy_bp = yy_cp; + + yy_current_state = (yy_start); +yy_match: + do + { + register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)]; + if ( yy_accept[yy_current_state] ) + { + (yy_last_accepting_state) = yy_current_state; + (yy_last_accepting_cpos) = yy_cp; + } + while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) + { + yy_current_state = (int) yy_def[yy_current_state]; + if ( yy_current_state >= 94 ) + yy_c = yy_meta[(unsigned int) yy_c]; + } + yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; + ++yy_cp; + } + while ( yy_base[yy_current_state] != 288 ); + +yy_find_action: + yy_act = yy_accept[yy_current_state]; + if ( yy_act == 0 ) + { /* have to back up */ + yy_cp = (yy_last_accepting_cpos); + yy_current_state = (yy_last_accepting_state); + yy_act = yy_accept[yy_current_state]; + } + + YY_DO_BEFORE_ACTION; + + if ( yy_act != YY_END_OF_BUFFER && yy_rule_can_match_eol[yy_act] ) + { + int yyl; + for ( yyl = 0; yyl < yyleng; ++yyl ) + if ( yytext[yyl] == '\n' ) + + yylineno++; +; + } + +do_action: /* This label is used only to access EOF actions. */ + + switch ( yy_act ) + { /* beginning of action switch */ + case 0: /* must back up */ + /* undo the effects of YY_DO_BEFORE_ACTION */ + *yy_cp = (yy_hold_char); + yy_cp = (yy_last_accepting_cpos); + yy_current_state = (yy_last_accepting_state); + goto yy_find_action; + +case 1: +YY_RULE_SETUP +#line 58 "dtc-lexer.l" +BEGIN(INCLUDE); + YY_BREAK +case 2: +YY_RULE_SETUP +#line 60 "dtc-lexer.l" +{ + yytext[strlen(yytext) - 1] = 0; + if (!push_input_file(yytext + 1)) { + /* Some unrecoverable error.*/ + exit(1); + } + BEGIN_DEFAULT(); + } + YY_BREAK +case YY_STATE_EOF(INITIAL): +case YY_STATE_EOF(INCLUDE): +case YY_STATE_EOF(BYTESTRING): +case YY_STATE_EOF(PROPNODENAME): +case YY_STATE_EOF(V1): +#line 70 "dtc-lexer.l" +{ + if (!pop_input_file()) { + yyterminate(); + } + } + YY_BREAK +case 3: +/* rule 3 can match eol */ +YY_RULE_SETUP +#line 76 "dtc-lexer.l" +{ + yylloc.filenum = srcpos_filenum; + yylloc.first_line = yylineno; + DPRINT("String: %s\n", yytext); + yylval.data = data_copy_escape_string(yytext+1, + yyleng-2); + yylloc.first_line = yylineno; + return DT_STRING; + } + YY_BREAK +case 4: +YY_RULE_SETUP +#line 86 "dtc-lexer.l" +{ + yylloc.filenum = srcpos_filenum; + yylloc.first_line = yylineno; + DPRINT("Keyword: /dts-v1/\n"); + dts_version = 1; + BEGIN_DEFAULT(); + return DT_V1; + } + YY_BREAK +case 5: +YY_RULE_SETUP +#line 95 "dtc-lexer.l" +{ + yylloc.filenum = srcpos_filenum; + yylloc.first_line = yylineno; + DPRINT("Keyword: /memreserve/\n"); + BEGIN_DEFAULT(); + return DT_MEMRESERVE; + } + YY_BREAK +case 6: +YY_RULE_SETUP +#line 103 "dtc-lexer.l" +{ + yylloc.filenum = srcpos_filenum; + yylloc.first_line = yylineno; + DPRINT("Label: %s\n", yytext); + yylval.labelref = strdup(yytext); + yylval.labelref[yyleng-1] = '\0'; + return DT_LABEL; + } + YY_BREAK +case 7: +YY_RULE_SETUP +#line 112 "dtc-lexer.l" +{ + yylloc.filenum = srcpos_filenum; + yylloc.first_line = yylineno; + if (*yytext == 'b') + yylval.cbase = 2; + else if (*yytext == 'o') + yylval.cbase = 8; + else if (*yytext == 'd') + yylval.cbase = 10; + else + yylval.cbase = 16; + DPRINT("Base: %d\n", yylval.cbase); + return DT_BASE; + } + YY_BREAK +case 8: +YY_RULE_SETUP +#line 127 "dtc-lexer.l" +{ + yylloc.filenum = srcpos_filenum; + yylloc.first_line = yylineno; + yylval.literal = strdup(yytext); + DPRINT("Literal: '%s'\n", yylval.literal); + return DT_LEGACYLITERAL; + } + YY_BREAK +case 9: +YY_RULE_SETUP +#line 135 "dtc-lexer.l" +{ + yylloc.filenum = srcpos_filenum; + yylloc.first_line = yylineno; + yylval.literal = strdup(yytext); + DPRINT("Literal: '%s'\n", yylval.literal); + return DT_LITERAL; + } + YY_BREAK +case 10: +YY_RULE_SETUP +#line 143 "dtc-lexer.l" +{ /* label reference */ + yylloc.filenum = srcpos_filenum; + yylloc.first_line = yylineno; + DPRINT("Ref: %s\n", yytext+1); + yylval.labelref = strdup(yytext+1); + return DT_REF; + } + YY_BREAK +case 11: +YY_RULE_SETUP +#line 151 "dtc-lexer.l" +{ /* new-style path reference */ + yylloc.filenum = srcpos_filenum; + yylloc.first_line = yylineno; + yytext[yyleng-1] = '\0'; + DPRINT("Ref: %s\n", yytext+2); + yylval.labelref = strdup(yytext+2); + return DT_REF; + } + YY_BREAK +case 12: +YY_RULE_SETUP +#line 160 "dtc-lexer.l" +{ /* old-style path reference */ + yylloc.filenum = srcpos_filenum; + yylloc.first_line = yylineno; + DPRINT("Ref: %s\n", yytext+1); + yylval.labelref = strdup(yytext+1); + return DT_REF; + } + YY_BREAK +case 13: +YY_RULE_SETUP +#line 168 "dtc-lexer.l" +{ + yylloc.filenum = srcpos_filenum; + yylloc.first_line = yylineno; + yylval.byte = strtol(yytext, NULL, 16); + DPRINT("Byte: %02x\n", (int)yylval.byte); + return DT_BYTE; + } + YY_BREAK +case 14: +YY_RULE_SETUP +#line 176 "dtc-lexer.l" +{ + yylloc.filenum = srcpos_filenum; + yylloc.first_line = yylineno; + DPRINT("/BYTESTRING\n"); + BEGIN_DEFAULT(); + return ']'; + } + YY_BREAK +case 15: +YY_RULE_SETUP +#line 184 "dtc-lexer.l" +{ + yylloc.filenum = srcpos_filenum; + yylloc.first_line = yylineno; + DPRINT("PropNodeName: %s\n", yytext); + yylval.propnodename = strdup(yytext); + BEGIN_DEFAULT(); + return DT_PROPNODENAME; + } + YY_BREAK +case 16: +/* rule 16 can match eol */ +YY_RULE_SETUP +#line 194 "dtc-lexer.l" +/* eat whitespace */ + YY_BREAK +case 17: +/* rule 17 can match eol */ +YY_RULE_SETUP +#line 196 "dtc-lexer.l" +{ + yylloc.filenum = srcpos_filenum; + yylloc.first_line = yylineno; + DPRINT("Comment: %s\n", yytext); + /* eat comments */ + } + YY_BREAK +case 18: +/* rule 18 can match eol */ +YY_RULE_SETUP +#line 203 "dtc-lexer.l" +/* eat line comments */ + YY_BREAK +case 19: +YY_RULE_SETUP +#line 205 "dtc-lexer.l" +{ + yylloc.filenum = srcpos_filenum; + yylloc.first_line = yylineno; + DPRINT("Char: %c (\\x%02x)\n", yytext[0], + (unsigned)yytext[0]); + if (yytext[0] == '[') { + DPRINT("<BYTESTRING>\n"); + BEGIN(BYTESTRING); + } + if ((yytext[0] == '{') + || (yytext[0] == ';')) { + DPRINT("<PROPNODENAME>\n"); + BEGIN(PROPNODENAME); + } + return yytext[0]; + } + YY_BREAK +case 20: +YY_RULE_SETUP +#line 222 "dtc-lexer.l" +ECHO; + YY_BREAK +#line 1111 "dtc-lexer.lex.c" + + case YY_END_OF_BUFFER: + { + /* Amount of text matched not including the EOB char. */ + int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1; + + /* Undo the effects of YY_DO_BEFORE_ACTION. */ + *yy_cp = (yy_hold_char); + YY_RESTORE_YY_MORE_OFFSET + + if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW ) + { + /* We're scanning a new file or input source. It's + * possible that this happened because the user + * just pointed yyin at a new source and called + * yylex(). If so, then we have to assure + * consistency between YY_CURRENT_BUFFER and our + * globals. Here is the right place to do so, because + * this is the first action (other than possibly a + * back-up) that will match for the new input source. + */ + (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; + YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin; + YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL; + } + + /* Note that here we test for yy_c_buf_p "<=" to the position + * of the first EOB in the buffer, since yy_c_buf_p will + * already have been incremented past the NUL character + * (since all states make transitions on EOB to the + * end-of-buffer state). Contrast this with the test + * in input(). + */ + if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) + { /* This was really a NUL. */ + yy_state_type yy_next_state; + + (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text; + + yy_current_state = yy_get_previous_state( ); + + /* Okay, we're now positioned to make the NUL + * transition. We couldn't have + * yy_get_previous_state() go ahead and do it + * for us because it doesn't know how to deal + * with the possibility of jamming (and we don't + * want to build jamming into it because then it + * will run more slowly). + */ + + yy_next_state = yy_try_NUL_trans( yy_current_state ); + + yy_bp = (yytext_ptr) + YY_MORE_ADJ; + + if ( yy_next_state ) + { + /* Consume the NUL. */ + yy_cp = ++(yy_c_buf_p); + yy_current_state = yy_next_state; + goto yy_match; + } + + else + { + yy_cp = (yy_c_buf_p); + goto yy_find_action; + } + } + + else switch ( yy_get_next_buffer( ) ) + { + case EOB_ACT_END_OF_FILE: + { + (yy_did_buffer_switch_on_eof) = 0; + + if ( yywrap( ) ) + { + /* Note: because we've taken care in + * yy_get_next_buffer() to have set up + * yytext, we can now set up + * yy_c_buf_p so that if some total + * hoser (like flex itself) wants to + * call the scanner after we return the + * YY_NULL, it'll still work - another + * YY_NULL will get returned. + */ + (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ; + + yy_act = YY_STATE_EOF(YY_START); + goto do_action; + } + + else + { + if ( ! (yy_did_buffer_switch_on_eof) ) + YY_NEW_FILE; + } + break; + } + + case EOB_ACT_CONTINUE_SCAN: + (yy_c_buf_p) = + (yytext_ptr) + yy_amount_of_matched_text; + + yy_current_state = yy_get_previous_state( ); + + yy_cp = (yy_c_buf_p); + yy_bp = (yytext_ptr) + YY_MORE_ADJ; + goto yy_match; + + case EOB_ACT_LAST_MATCH: + (yy_c_buf_p) = + &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)]; + + yy_current_state = yy_get_previous_state( ); + + yy_cp = (yy_c_buf_p); + yy_bp = (yytext_ptr) + YY_MORE_ADJ; + goto yy_find_action; + } + break; + } + + default: + YY_FATAL_ERROR( + "fatal flex scanner internal error--no action found" ); + } /* end of action switch */ + } /* end of scanning one token */ +} /* end of yylex */ + +/* yy_get_next_buffer - try to read in a new buffer + * + * Returns a code representing an action: + * EOB_ACT_LAST_MATCH - + * EOB_ACT_CONTINUE_SCAN - continue scanning from current position + * EOB_ACT_END_OF_FILE - end of file + */ +static int yy_get_next_buffer (void) +{ + register char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf; + register char *source = (yytext_ptr); + register int number_to_move, i; + int ret_val; + + if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] ) + YY_FATAL_ERROR( + "fatal flex scanner internal error--end of buffer missed" ); + + if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 ) + { /* Don't try to fill the buffer, so this is an EOF. */ + if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 ) + { + /* We matched a single character, the EOB, so + * treat this as a final EOF. + */ + return EOB_ACT_END_OF_FILE; + } + + else + { + /* We matched some text prior to the EOB, first + * process it. + */ + return EOB_ACT_LAST_MATCH; + } + } + + /* Try to read more data. */ + + /* First move last chars to start of buffer. */ + number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr)) - 1; + + for ( i = 0; i < number_to_move; ++i ) + *(dest++) = *(source++); + + if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING ) + /* don't do the read, it's not guaranteed to return an EOF, + * just force an EOF + */ + YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0; + + else + { + int num_to_read = + YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1; + + while ( num_to_read <= 0 ) + { /* Not enough room in the buffer - grow it. */ + + /* just a shorter name for the current buffer */ + YY_BUFFER_STATE b = YY_CURRENT_BUFFER; + + int yy_c_buf_p_offset = + (int) ((yy_c_buf_p) - b->yy_ch_buf); + + if ( b->yy_is_our_buffer ) + { + int new_size = b->yy_buf_size * 2; + + if ( new_size <= 0 ) + b->yy_buf_size += b->yy_buf_size / 8; + else + b->yy_buf_size *= 2; + + b->yy_ch_buf = (char *) + /* Include room in for 2 EOB chars. */ + yyrealloc((void *) b->yy_ch_buf,b->yy_buf_size + 2 ); + } + else + /* Can't grow it, we don't own it. */ + b->yy_ch_buf = 0; + + if ( ! b->yy_ch_buf ) + YY_FATAL_ERROR( + "fatal error - scanner input buffer overflow" ); + + (yy_c_buf_p) = &b->yy_ch_buf[yy_c_buf_p_offset]; + + num_to_read = YY_CURRENT_BUFFER_LVALUE->yy_buf_size - + number_to_move - 1; + + } + + if ( num_to_read > YY_READ_BUF_SIZE ) + num_to_read = YY_READ_BUF_SIZE; + + /* Read in more data. */ + YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]), + (yy_n_chars), (size_t) num_to_read ); + + YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); + } + + if ( (yy_n_chars) == 0 ) + { + if ( number_to_move == YY_MORE_ADJ ) + { + ret_val = EOB_ACT_END_OF_FILE; + yyrestart(yyin ); + } + + else + { + ret_val = EOB_ACT_LAST_MATCH; + YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = + YY_BUFFER_EOF_PENDING; + } + } + + else + ret_val = EOB_ACT_CONTINUE_SCAN; + + (yy_n_chars) += number_to_move; + YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR; + YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR; + + (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0]; + + return ret_val; +} + +/* yy_get_previous_state - get the state just before the EOB char was reached */ + + static yy_state_type yy_get_previous_state (void) +{ + register yy_state_type yy_current_state; + register char *yy_cp; + + yy_current_state = (yy_start); + + for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp ) + { + register YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1); + if ( yy_accept[yy_current_state] ) + { + (yy_last_accepting_state) = yy_current_state; + (yy_last_accepting_cpos) = yy_cp; + } + while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) + { + yy_current_state = (int) yy_def[yy_current_state]; + if ( yy_current_state >= 94 ) + yy_c = yy_meta[(unsigned int) yy_c]; + } + yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; + } + + return yy_current_state; +} + +/* yy_try_NUL_trans - try to make a transition on the NUL character + * + * synopsis + * next_state = yy_try_NUL_trans( current_state ); + */ + static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state ) +{ + register int yy_is_jam; + register char *yy_cp = (yy_c_buf_p); + + register YY_CHAR yy_c = 1; + if ( yy_accept[yy_current_state] ) + { + (yy_last_accepting_state) = yy_current_state; + (yy_last_accepting_cpos) = yy_cp; + } + while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) + { + yy_current_state = (int) yy_def[yy_current_state]; + if ( yy_current_state >= 94 ) + yy_c = yy_meta[(unsigned int) yy_c]; + } + yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; + yy_is_jam = (yy_current_state == 93); + + return yy_is_jam ? 0 : yy_current_state; +} + +#ifndef YY_NO_INPUT +#ifdef __cplusplus + static int yyinput (void) +#else + static int input (void) +#endif + +{ + int c; + + *(yy_c_buf_p) = (yy_hold_char); + + if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR ) + { + /* yy_c_buf_p now points to the character we want to return. + * If this occurs *before* the EOB characters, then it's a + * valid NUL; if not, then we've hit the end of the buffer. + */ + if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) + /* This was really a NUL. */ + *(yy_c_buf_p) = '\0'; + + else + { /* need more input */ + int offset = (yy_c_buf_p) - (yytext_ptr); + ++(yy_c_buf_p); + + switch ( yy_get_next_buffer( ) ) + { + case EOB_ACT_LAST_MATCH: + /* This happens because yy_g_n_b() + * sees that we've accumulated a + * token and flags that we need to + * try matching the token before + * proceeding. But for input(), + * there's no matching to consider. + * So convert the EOB_ACT_LAST_MATCH + * to EOB_ACT_END_OF_FILE. + */ + + /* Reset buffer status. */ + yyrestart(yyin ); + + /*FALLTHROUGH*/ + + case EOB_ACT_END_OF_FILE: + { + if ( yywrap( ) ) + return EOF; + + if ( ! (yy_did_buffer_switch_on_eof) ) + YY_NEW_FILE; +#ifdef __cplusplus + return yyinput(); +#else + return input(); +#endif + } + + case EOB_ACT_CONTINUE_SCAN: + (yy_c_buf_p) = (yytext_ptr) + offset; + break; + } + } + } + + c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */ + *(yy_c_buf_p) = '\0'; /* preserve yytext */ + (yy_hold_char) = *++(yy_c_buf_p); + + if ( c == '\n' ) + + yylineno++; +; + + return c; +} +#endif /* ifndef YY_NO_INPUT */ + +/** Immediately switch to a different input stream. + * @param input_file A readable stream. + * + * @note This function does not reset the start condition to @c INITIAL . + */ + void yyrestart (FILE * input_file ) +{ + + if ( ! YY_CURRENT_BUFFER ){ + yyensure_buffer_stack (); + YY_CURRENT_BUFFER_LVALUE = + yy_create_buffer(yyin,YY_BUF_SIZE ); + } + + yy_init_buffer(YY_CURRENT_BUFFER,input_file ); + yy_load_buffer_state( ); +} + +/** Switch to a different input buffer. + * @param new_buffer The new input buffer. + * + */ + void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer ) +{ + + /* TODO. We should be able to replace this entire function body + * with + * yypop_buffer_state(); + * yypush_buffer_state(new_buffer); + */ + yyensure_buffer_stack (); + if ( YY_CURRENT_BUFFER == new_buffer ) + return; + + if ( YY_CURRENT_BUFFER ) + { + /* Flush out information for old buffer. */ + *(yy_c_buf_p) = (yy_hold_char); + YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); + YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); + } + + YY_CURRENT_BUFFER_LVALUE = new_buffer; + yy_load_buffer_state( ); + + /* We don't actually know whether we did this switch during + * EOF (yywrap()) processing, but the only time this flag + * is looked at is after yywrap() is called, so it's safe + * to go ahead and always set it. + */ + (yy_did_buffer_switch_on_eof) = 1; +} + +static void yy_load_buffer_state (void) +{ + (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; + (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos; + yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file; + (yy_hold_char) = *(yy_c_buf_p); +} + +/** Allocate and initialize an input buffer state. + * @param file A readable stream. + * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE. + * + * @return the allocated buffer state. + */ + YY_BUFFER_STATE yy_create_buffer (FILE * file, int size ) +{ + YY_BUFFER_STATE b; + + b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) ); + if ( ! b ) + YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); + + b->yy_buf_size = size; + + /* yy_ch_buf has to be 2 characters longer than the size given because + * we need to put in 2 end-of-buffer characters. + */ + b->yy_ch_buf = (char *) yyalloc(b->yy_buf_size + 2 ); + if ( ! b->yy_ch_buf ) + YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); + + b->yy_is_our_buffer = 1; + + yy_init_buffer(b,file ); + + return b; +} + +/** Destroy the buffer. + * @param b a buffer created with yy_create_buffer() + * + */ + void yy_delete_buffer (YY_BUFFER_STATE b ) +{ + + if ( ! b ) + return; + + if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */ + YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0; + + if ( b->yy_is_our_buffer ) + yyfree((void *) b->yy_ch_buf ); + + yyfree((void *) b ); +} + +#ifndef __cplusplus +extern int isatty (int ); +#endif /* __cplusplus */ + +/* Initializes or reinitializes a buffer. + * This function is sometimes called more than once on the same buffer, + * such as during a yyrestart() or at EOF. + */ + static void yy_init_buffer (YY_BUFFER_STATE b, FILE * file ) + +{ + int oerrno = errno; + + yy_flush_buffer(b ); + + b->yy_input_file = file; + b->yy_fill_buffer = 1; + + /* If b is the current buffer, then yy_init_buffer was _probably_ + * called from yyrestart() or through yy_get_next_buffer. + * In that case, we don't want to reset the lineno or column. + */ + if (b != YY_CURRENT_BUFFER){ + b->yy_bs_lineno = 1; + b->yy_bs_column = 0; + } + + b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0; + + errno = oerrno; +} + +/** Discard all buffered characters. On the next scan, YY_INPUT will be called. + * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER. + * + */ + void yy_flush_buffer (YY_BUFFER_STATE b ) +{ + if ( ! b ) + return; + + b->yy_n_chars = 0; + + /* We always need two end-of-buffer characters. The first causes + * a transition to the end-of-buffer state. The second causes + * a jam in that state. + */ + b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR; + b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR; + + b->yy_buf_pos = &b->yy_ch_buf[0]; + + b->yy_at_bol = 1; + b->yy_buffer_status = YY_BUFFER_NEW; + + if ( b == YY_CURRENT_BUFFER ) + yy_load_buffer_state( ); +} + +/** Pushes the new state onto the stack. The new state becomes + * the current state. This function will allocate the stack + * if necessary. + * @param new_buffer The new state. + * + */ +void yypush_buffer_state (YY_BUFFER_STATE new_buffer ) +{ + if (new_buffer == NULL) + return; + + yyensure_buffer_stack(); + + /* This block is copied from yy_switch_to_buffer. */ + if ( YY_CURRENT_BUFFER ) + { + /* Flush out information for old buffer. */ + *(yy_c_buf_p) = (yy_hold_char); + YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); + YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); + } + + /* Only push if top exists. Otherwise, replace top. */ + if (YY_CURRENT_BUFFER) + (yy_buffer_stack_top)++; + YY_CURRENT_BUFFER_LVALUE = new_buffer; + + /* copied from yy_switch_to_buffer. */ + yy_load_buffer_state( ); + (yy_did_buffer_switch_on_eof) = 1; +} + +/** Removes and deletes the top of the stack, if present. + * The next element becomes the new top. + * + */ +void yypop_buffer_state (void) +{ + if (!YY_CURRENT_BUFFER) + return; + + yy_delete_buffer(YY_CURRENT_BUFFER ); + YY_CURRENT_BUFFER_LVALUE = NULL; + if ((yy_buffer_stack_top) > 0) + --(yy_buffer_stack_top); + + if (YY_CURRENT_BUFFER) { + yy_load_buffer_state( ); + (yy_did_buffer_switch_on_eof) = 1; + } +} + +/* Allocates the stack if it does not exist. + * Guarantees space for at least one push. + */ +static void yyensure_buffer_stack (void) +{ + int num_to_alloc; + + if (!(yy_buffer_stack)) { + + /* First allocation is just for 2 elements, since we don't know if this + * scanner will even need a stack. We use 2 instead of 1 to avoid an + * immediate realloc on the next call. + */ + num_to_alloc = 1; + (yy_buffer_stack) = (struct yy_buffer_state**)yyalloc + (num_to_alloc * sizeof(struct yy_buffer_state*) + ); + + memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*)); + + (yy_buffer_stack_max) = num_to_alloc; + (yy_buffer_stack_top) = 0; + return; + } + + if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){ + + /* Increase the buffer to prepare for a possible push. */ + int grow_size = 8 /* arbitrary grow size */; + + num_to_alloc = (yy_buffer_stack_max) + grow_size; + (yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc + ((yy_buffer_stack), + num_to_alloc * sizeof(struct yy_buffer_state*) + ); + + /* zero only the new slots.*/ + memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*)); + (yy_buffer_stack_max) = num_to_alloc; + } +} + +/** Setup the input buffer state to scan directly from a user-specified character buffer. + * @param base the character buffer + * @param size the size in bytes of the character buffer + * + * @return the newly allocated buffer state object. + */ +YY_BUFFER_STATE yy_scan_buffer (char * base, yy_size_t size ) +{ + YY_BUFFER_STATE b; + + if ( size < 2 || + base[size-2] != YY_END_OF_BUFFER_CHAR || + base[size-1] != YY_END_OF_BUFFER_CHAR ) + /* They forgot to leave room for the EOB's. */ + return 0; + + b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) ); + if ( ! b ) + YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" ); + + b->yy_buf_size = size - 2; /* "- 2" to take care of EOB's */ + b->yy_buf_pos = b->yy_ch_buf = base; + b->yy_is_our_buffer = 0; + b->yy_input_file = 0; + b->yy_n_chars = b->yy_buf_size; + b->yy_is_interactive = 0; + b->yy_at_bol = 1; + b->yy_fill_buffer = 0; + b->yy_buffer_status = YY_BUFFER_NEW; + + yy_switch_to_buffer(b ); + + return b; +} + +/** Setup the input buffer state to scan a string. The next call to yylex() will + * scan from a @e copy of @a str. + * @param yystr a NUL-terminated string to scan + * + * @return the newly allocated buffer state object. + * @note If you want to scan bytes that may contain NUL values, then use + * yy_scan_bytes() instead. + */ +YY_BUFFER_STATE yy_scan_string (yyconst char * yystr ) +{ + + return yy_scan_bytes(yystr,strlen(yystr) ); +} + +/** Setup the input buffer state to scan the given bytes. The next call to yylex() will + * scan from a @e copy of @a bytes. + * @param bytes the byte buffer to scan + * @param len the number of bytes in the buffer pointed to by @a bytes. + * + * @return the newly allocated buffer state object. + */ +YY_BUFFER_STATE yy_scan_bytes (yyconst char * yybytes, int _yybytes_len ) +{ + YY_BUFFER_STATE b; + char *buf; + yy_size_t n; + int i; + + /* Get memory for full buffer, including space for trailing EOB's. */ + n = _yybytes_len + 2; + buf = (char *) yyalloc(n ); + if ( ! buf ) + YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" ); + + for ( i = 0; i < _yybytes_len; ++i ) + buf[i] = yybytes[i]; + + buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR; + + b = yy_scan_buffer(buf,n ); + if ( ! b ) + YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" ); + + /* It's okay to grow etc. this buffer, and we should throw it + * away when we're done. + */ + b->yy_is_our_buffer = 1; + + return b; +} + +#ifndef YY_EXIT_FAILURE +#define YY_EXIT_FAILURE 2 +#endif + +static void yy_fatal_error (yyconst char* msg ) +{ + (void) fprintf( stderr, "%s\n", msg ); + exit( YY_EXIT_FAILURE ); +} + +/* Redefine yyless() so it works in section 3 code. */ + +#undef yyless +#define yyless(n) \ + do \ + { \ + /* Undo effects of setting up yytext. */ \ + int yyless_macro_arg = (n); \ + YY_LESS_LINENO(yyless_macro_arg);\ + yytext[yyleng] = (yy_hold_char); \ + (yy_c_buf_p) = yytext + yyless_macro_arg; \ + (yy_hold_char) = *(yy_c_buf_p); \ + *(yy_c_buf_p) = '\0'; \ + yyleng = yyless_macro_arg; \ + } \ + while ( 0 ) + +/* Accessor methods (get/set functions) to struct members. */ + +/** Get the current line number. + * + */ +int yyget_lineno (void) +{ + + return yylineno; +} + +/** Get the input stream. + * + */ +FILE *yyget_in (void) +{ + return yyin; +} + +/** Get the output stream. + * + */ +FILE *yyget_out (void) +{ + return yyout; +} + +/** Get the length of the current token. + * + */ +int yyget_leng (void) +{ + return yyleng; +} + +/** Get the current token. + * + */ + +char *yyget_text (void) +{ + return yytext; +} + +/** Set the current line number. + * @param line_number + * + */ +void yyset_lineno (int line_number ) +{ + + yylineno = line_number; +} + +/** Set the input stream. This does not discard the current + * input buffer. + * @param in_str A readable stream. + * + * @see yy_switch_to_buffer + */ +void yyset_in (FILE * in_str ) +{ + yyin = in_str ; +} + +void yyset_out (FILE * out_str ) +{ + yyout = out_str ; +} + +int yyget_debug (void) +{ + return yy_flex_debug; +} + +void yyset_debug (int bdebug ) +{ + yy_flex_debug = bdebug ; +} + +static int yy_init_globals (void) +{ + /* Initialization is the same as for the non-reentrant scanner. + * This function is called from yylex_destroy(), so don't allocate here. + */ + + /* We do not touch yylineno unless the option is enabled. */ + yylineno = 1; + + (yy_buffer_stack) = 0; + (yy_buffer_stack_top) = 0; + (yy_buffer_stack_max) = 0; + (yy_c_buf_p) = (char *) 0; + (yy_init) = 0; + (yy_start) = 0; + +/* Defined in main.c */ +#ifdef YY_STDINIT + yyin = stdin; + yyout = stdout; +#else + yyin = (FILE *) 0; + yyout = (FILE *) 0; +#endif + + /* For future reference: Set errno on error, since we are called by + * yylex_init() + */ + return 0; +} + +/* yylex_destroy is for both reentrant and non-reentrant scanners. */ +int yylex_destroy (void) +{ + + /* Pop the buffer stack, destroying each element. */ + while(YY_CURRENT_BUFFER){ + yy_delete_buffer(YY_CURRENT_BUFFER ); + YY_CURRENT_BUFFER_LVALUE = NULL; + yypop_buffer_state(); + } + + /* Destroy the stack itself. */ + yyfree((yy_buffer_stack) ); + (yy_buffer_stack) = NULL; + + /* Reset the globals. This is important in a non-reentrant scanner so the next time + * yylex() is called, initialization will occur. */ + yy_init_globals( ); + + return 0; +} + +/* + * Internal utility routines. + */ + +#ifndef yytext_ptr +static void yy_flex_strncpy (char* s1, yyconst char * s2, int n ) +{ + register int i; + for ( i = 0; i < n; ++i ) + s1[i] = s2[i]; +} +#endif + +#ifdef YY_NEED_STRLEN +static int yy_flex_strlen (yyconst char * s ) +{ + register int n; + for ( n = 0; s[n]; ++n ) + ; + + return n; +} +#endif + +void *yyalloc (yy_size_t size ) +{ + return (void *) malloc( size ); +} + +void *yyrealloc (void * ptr, yy_size_t size ) +{ + /* The cast to (char *) in the following accommodates both + * implementations that use char* generic pointers, and those + * that use void* generic pointers. It works with the latter + * because both ANSI C and C++ allow castless assignment from + * any pointer type to void*, and deal with argument conversions + * as though doing an assignment. + */ + return (void *) realloc( (char *) ptr, size ); +} + +void yyfree (void * ptr ) +{ + free( (char *) ptr ); /* see yyrealloc() for (char *) cast */ +} + +#define YYTABLES_NAME "yytables" + +#line 222 "dtc-lexer.l" + + + + +/* + * Stack of nested include file contexts. + */ + +struct incl_file { + int filenum; + FILE *file; + YY_BUFFER_STATE yy_prev_buf; + int yy_prev_lineno; + struct incl_file *prev; +}; + +struct incl_file *incl_file_stack; + + +/* + * Detect infinite include recursion. + */ +#define MAX_INCLUDE_DEPTH (100) + +static int incl_depth = 0; + + +int push_input_file(const char *filename) +{ + FILE *f; + struct incl_file *incl_file; + + if (!filename) { + yyerror("No include file name given."); + return 0; + } + + if (incl_depth++ >= MAX_INCLUDE_DEPTH) { + yyerror("Includes nested too deeply"); + return 0; + } + + f = dtc_open_file(filename); + + incl_file = malloc(sizeof(struct incl_file)); + if (!incl_file) { + yyerror("Can not allocate include file space."); + return 0; + } + + /* + * Save current context. + */ + incl_file->yy_prev_buf = YY_CURRENT_BUFFER; + incl_file->yy_prev_lineno = yylineno; + incl_file->filenum = srcpos_filenum; + incl_file->file = yyin; + incl_file->prev = incl_file_stack; + + incl_file_stack = incl_file; + + /* + * Establish new context. + */ + srcpos_filenum = lookup_file_name(filename, 0); + yylineno = 1; + yyin = f; + yy_switch_to_buffer(yy_create_buffer(yyin,YY_BUF_SIZE)); + + return 1; +} + + +int pop_input_file(void) +{ + struct incl_file *incl_file; + + if (incl_file_stack == 0) + return 0; + + fclose(yyin); + + /* + * Pop. + */ + --incl_depth; + incl_file = incl_file_stack; + incl_file_stack = incl_file->prev; + + /* + * Recover old context. + */ + yy_delete_buffer(YY_CURRENT_BUFFER); + yy_switch_to_buffer(incl_file->yy_prev_buf); + yylineno = incl_file->yy_prev_lineno; + srcpos_filenum = incl_file->filenum; + yyin = incl_file->file; + + /* + * Free old state. + */ + free(incl_file); + + if (YY_CURRENT_BUFFER == 0) + return 0; + + return 1; +} + diff --git a/arch/powerpc/boot/dtc-src/dtc-parser.tab.c_shipped b/arch/powerpc/boot/dtc-src/dtc-parser.tab.c_shipped new file mode 100644 index 00000000000..28e6ec0296a --- /dev/null +++ b/arch/powerpc/boot/dtc-src/dtc-parser.tab.c_shipped @@ -0,0 +1,1983 @@ +/* A Bison parser, made by GNU Bison 2.3. */ + +/* Skeleton implementation for Bison's Yacc-like parsers in C + + Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004, 2005, 2006 + Free Software Foundation, Inc. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, + Boston, MA 02110-1301, USA. */ + +/* As a special exception, you may create a larger work that contains + part or all of the Bison parser skeleton and distribute that work + under terms of your choice, so long as that work isn't itself a + parser generator using the skeleton or a modified version thereof + as a parser skeleton. Alternatively, if you modify or redistribute + the parser skeleton itself, you may (at your option) remove this + special exception, which will cause the skeleton and the resulting + Bison output files to be licensed under the GNU General Public + License without this special exception. + + This special exception was added by the Free Software Foundation in + version 2.2 of Bison. */ + +/* C LALR(1) parser skeleton written by Richard Stallman, by + simplifying the original so-called "semantic" parser. */ + +/* All symbols defined below should begin with yy or YY, to avoid + infringing on user name space. This should be done even for local + variables, as they might otherwise be expanded by user macros. + There are some unavoidable exceptions within include files to + define necessary library symbols; they are noted "INFRINGES ON + USER NAME SPACE" below. */ + +/* Identify Bison output. */ +#define YYBISON 1 + +/* Bison version. */ +#define YYBISON_VERSION "2.3" + +/* Skeleton name. */ +#define YYSKELETON_NAME "yacc.c" + +/* Pure parsers. */ +#define YYPURE 0 + +/* Using locations. */ +#define YYLSP_NEEDED 1 + + + +/* Tokens. */ +#ifndef YYTOKENTYPE +# define YYTOKENTYPE + /* Put the tokens into the symbol table, so that GDB and other debuggers + know about them. */ + enum yytokentype { + DT_V1 = 258, + DT_MEMRESERVE = 259, + DT_PROPNODENAME = 260, + DT_LITERAL = 261, + DT_LEGACYLITERAL = 262, + DT_BASE = 263, + DT_BYTE = 264, + DT_STRING = 265, + DT_LABEL = 266, + DT_REF = 267 + }; +#endif +/* Tokens. */ +#define DT_V1 258 +#define DT_MEMRESERVE 259 +#define DT_PROPNODENAME 260 +#define DT_LITERAL 261 +#define DT_LEGACYLITERAL 262 +#define DT_BASE 263 +#define DT_BYTE 264 +#define DT_STRING 265 +#define DT_LABEL 266 +#define DT_REF 267 + + + + +/* Copy the first part of user declarations. */ +#line 23 "dtc-parser.y" + +#include "dtc.h" +#include "srcpos.h" + +int yylex(void); +unsigned long long eval_literal(const char *s, int base, int bits); + +extern struct boot_info *the_boot_info; + + + +/* Enabling traces. */ +#ifndef YYDEBUG +# define YYDEBUG 0 +#endif + +/* Enabling verbose error messages. */ +#ifdef YYERROR_VERBOSE +# undef YYERROR_VERBOSE +# define YYERROR_VERBOSE 1 +#else +# define YYERROR_VERBOSE 0 +#endif + +/* Enabling the token table. */ +#ifndef YYTOKEN_TABLE +# define YYTOKEN_TABLE 0 +#endif + +#if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED +typedef union YYSTYPE +#line 34 "dtc-parser.y" +{ + char *propnodename; + char *literal; + char *labelref; + unsigned int cbase; + u8 byte; + struct data data; + + u64 addr; + cell_t cell; + struct property *prop; + struct property *proplist; + struct node *node; + struct node *nodelist; + struct reserve_info *re; +} +/* Line 187 of yacc.c. */ +#line 148 "dtc-parser.tab.c" + YYSTYPE; +# define yystype YYSTYPE /* obsolescent; will be withdrawn */ +# define YYSTYPE_IS_DECLARED 1 +# define YYSTYPE_IS_TRIVIAL 1 +#endif + +#if ! defined YYLTYPE && ! defined YYLTYPE_IS_DECLARED +typedef struct YYLTYPE +{ + int first_line; + int first_column; + int last_line; + int last_column; +} YYLTYPE; +# define yyltype YYLTYPE /* obsolescent; will be withdrawn */ +# define YYLTYPE_IS_DECLARED 1 +# define YYLTYPE_IS_TRIVIAL 1 +#endif + + +/* Copy the second part of user declarations. */ + + +/* Line 216 of yacc.c. */ +#line 173 "dtc-parser.tab.c" + +#ifdef short +# undef short +#endif + +#ifdef YYTYPE_UINT8 +typedef YYTYPE_UINT8 yytype_uint8; +#else +typedef unsigned char yytype_uint8; +#endif + +#ifdef YYTYPE_INT8 +typedef YYTYPE_INT8 yytype_int8; +#elif (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +typedef signed char yytype_int8; +#else +typedef short int yytype_int8; +#endif + +#ifdef YYTYPE_UINT16 +typedef YYTYPE_UINT16 yytype_uint16; +#else +typedef unsigned short int yytype_uint16; +#endif + +#ifdef YYTYPE_INT16 +typedef YYTYPE_INT16 yytype_int16; +#else +typedef short int yytype_int16; +#endif + +#ifndef YYSIZE_T +# ifdef __SIZE_TYPE__ +# define YYSIZE_T __SIZE_TYPE__ +# elif defined size_t +# define YYSIZE_T size_t +# elif ! defined YYSIZE_T && (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +# include <stddef.h> /* INFRINGES ON USER NAME SPACE */ +# define YYSIZE_T size_t +# else +# define YYSIZE_T unsigned int +# endif +#endif + +#define YYSIZE_MAXIMUM ((YYSIZE_T) -1) + +#ifndef YY_ +# if YYENABLE_NLS +# if ENABLE_NLS +# include <libintl.h> /* INFRINGES ON USER NAME SPACE */ +# define YY_(msgid) dgettext ("bison-runtime", msgid) +# endif +# endif +# ifndef YY_ +# define YY_(msgid) msgid +# endif +#endif + +/* Suppress unused-variable warnings by "using" E. */ +#if ! defined lint || defined __GNUC__ +# define YYUSE(e) ((void) (e)) +#else +# define YYUSE(e) /* empty */ +#endif + +/* Identity function, used to suppress warnings about constant conditions. */ +#ifndef lint +# define YYID(n) (n) +#else +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static int +YYID (int i) +#else +static int +YYID (i) + int i; +#endif +{ + return i; +} +#endif + +#if ! defined yyoverflow || YYERROR_VERBOSE + +/* The parser invokes alloca or malloc; define the necessary symbols. */ + +# ifdef YYSTACK_USE_ALLOCA +# if YYSTACK_USE_ALLOCA +# ifdef __GNUC__ +# define YYSTACK_ALLOC __builtin_alloca +# elif defined __BUILTIN_VA_ARG_INCR +# include <alloca.h> /* INFRINGES ON USER NAME SPACE */ +# elif defined _AIX +# define YYSTACK_ALLOC __alloca +# elif defined _MSC_VER +# include <malloc.h> /* INFRINGES ON USER NAME SPACE */ +# define alloca _alloca +# else +# define YYSTACK_ALLOC alloca +# if ! defined _ALLOCA_H && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +# include <stdlib.h> /* INFRINGES ON USER NAME SPACE */ +# ifndef _STDLIB_H +# define _STDLIB_H 1 +# endif +# endif +# endif +# endif +# endif + +# ifdef YYSTACK_ALLOC + /* Pacify GCC's `empty if-body' warning. */ +# define YYSTACK_FREE(Ptr) do { /* empty */; } while (YYID (0)) +# ifndef YYSTACK_ALLOC_MAXIMUM + /* The OS might guarantee only one guard page at the bottom of the stack, + and a page size can be as small as 4096 bytes. So we cannot safely + invoke alloca (N) if N exceeds 4096. Use a slightly smaller number + to allow for a few compiler-allocated temporary stack slots. */ +# define YYSTACK_ALLOC_MAXIMUM 4032 /* reasonable circa 2006 */ +# endif +# else +# define YYSTACK_ALLOC YYMALLOC +# define YYSTACK_FREE YYFREE +# ifndef YYSTACK_ALLOC_MAXIMUM +# define YYSTACK_ALLOC_MAXIMUM YYSIZE_MAXIMUM +# endif +# if (defined __cplusplus && ! defined _STDLIB_H \ + && ! ((defined YYMALLOC || defined malloc) \ + && (defined YYFREE || defined free))) +# include <stdlib.h> /* INFRINGES ON USER NAME SPACE */ +# ifndef _STDLIB_H +# define _STDLIB_H 1 +# endif +# endif +# ifndef YYMALLOC +# define YYMALLOC malloc +# if ! defined malloc && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +void *malloc (YYSIZE_T); /* INFRINGES ON USER NAME SPACE */ +# endif +# endif +# ifndef YYFREE +# define YYFREE free +# if ! defined free && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +void free (void *); /* INFRINGES ON USER NAME SPACE */ +# endif +# endif +# endif +#endif /* ! defined yyoverflow || YYERROR_VERBOSE */ + + +#if (! defined yyoverflow \ + && (! defined __cplusplus \ + || (defined YYLTYPE_IS_TRIVIAL && YYLTYPE_IS_TRIVIAL \ + && defined YYSTYPE_IS_TRIVIAL && YYSTYPE_IS_TRIVIAL))) + +/* A type that is properly aligned for any stack member. */ +union yyalloc +{ + yytype_int16 yyss; + YYSTYPE yyvs; + YYLTYPE yyls; +}; + +/* The size of the maximum gap between one aligned stack and the next. */ +# define YYSTACK_GAP_MAXIMUM (sizeof (union yyalloc) - 1) + +/* The size of an array large to enough to hold all stacks, each with + N elements. */ +# define YYSTACK_BYTES(N) \ + ((N) * (sizeof (yytype_int16) + sizeof (YYSTYPE) + sizeof (YYLTYPE)) \ + + 2 * YYSTACK_GAP_MAXIMUM) + +/* Copy COUNT objects from FROM to TO. The source and destination do + not overlap. */ +# ifndef YYCOPY +# if defined __GNUC__ && 1 < __GNUC__ +# define YYCOPY(To, From, Count) \ + __builtin_memcpy (To, From, (Count) * sizeof (*(From))) +# else +# define YYCOPY(To, From, Count) \ + do \ + { \ + YYSIZE_T yyi; \ + for (yyi = 0; yyi < (Count); yyi++) \ + (To)[yyi] = (From)[yyi]; \ + } \ + while (YYID (0)) +# endif +# endif + +/* Relocate STACK from its old location to the new one. The + local variables YYSIZE and YYSTACKSIZE give the old and new number of + elements in the stack, and YYPTR gives the new location of the + stack. Advance YYPTR to a properly aligned location for the next + stack. */ +# define YYSTACK_RELOCATE(Stack) \ + do \ + { \ + YYSIZE_T yynewbytes; \ + YYCOPY (&yyptr->Stack, Stack, yysize); \ + Stack = &yyptr->Stack; \ + yynewbytes = yystacksize * sizeof (*Stack) + YYSTACK_GAP_MAXIMUM; \ + yyptr += yynewbytes / sizeof (*yyptr); \ + } \ + while (YYID (0)) + +#endif + +/* YYFINAL -- State number of the termination state. */ +#define YYFINAL 9 +/* YYLAST -- Last index in YYTABLE. */ +#define YYLAST 60 + +/* YYNTOKENS -- Number of terminals. */ +#define YYNTOKENS 24 +/* YYNNTS -- Number of nonterminals. */ +#define YYNNTS 20 +/* YYNRULES -- Number of rules. */ +#define YYNRULES 43 +/* YYNRULES -- Number of states. */ +#define YYNSTATES 67 + +/* YYTRANSLATE(YYLEX) -- Bison symbol number corresponding to YYLEX. */ +#define YYUNDEFTOK 2 +#define YYMAXUTOK 267 + +#define YYTRANSLATE(YYX) \ + ((unsigned int) (YYX) <= YYMAXUTOK ? yytranslate[YYX] : YYUNDEFTOK) + +/* YYTRANSLATE[YYLEX] -- Bison symbol number corresponding to YYLEX. */ +static const yytype_uint8 yytranslate[] = +{ + 0, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 23, 14, 2, 15, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 13, + 19, 18, 20, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 21, 2, 22, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 16, 2, 17, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 1, 2, 3, 4, + 5, 6, 7, 8, 9, 10, 11, 12 +}; + +#if YYDEBUG +/* YYPRHS[YYN] -- Index of the first RHS symbol of rule number YYN in + YYRHS. */ +static const yytype_uint8 yyprhs[] = +{ + 0, 0, 3, 8, 11, 12, 15, 21, 22, 25, + 27, 34, 36, 38, 41, 47, 48, 51, 57, 61, + 64, 69, 74, 77, 80, 81, 84, 87, 88, 91, + 94, 97, 98, 100, 102, 105, 106, 109, 112, 113, + 116, 119, 123, 124 +}; + +/* YYRHS -- A `-1'-separated list of the rules' RHS. */ +static const yytype_int8 yyrhs[] = +{ + 25, 0, -1, 3, 13, 26, 31, -1, 28, 31, + -1, -1, 27, 26, -1, 43, 4, 30, 30, 13, + -1, -1, 29, 28, -1, 27, -1, 43, 4, 30, + 14, 30, 13, -1, 6, -1, 7, -1, 15, 32, + -1, 16, 33, 41, 17, 13, -1, -1, 33, 34, + -1, 43, 5, 18, 35, 13, -1, 43, 5, 13, + -1, 36, 10, -1, 36, 19, 37, 20, -1, 36, + 21, 40, 22, -1, 36, 12, -1, 35, 11, -1, + -1, 35, 23, -1, 36, 11, -1, -1, 37, 39, + -1, 37, 12, -1, 37, 11, -1, -1, 8, -1, + 6, -1, 38, 7, -1, -1, 40, 9, -1, 40, + 11, -1, -1, 42, 41, -1, 42, 34, -1, 43, + 5, 32, -1, -1, 11, -1 +}; + +/* YYRLINE[YYN] -- source line where rule number YYN was defined. */ +static const yytype_uint16 yyrline[] = +{ + 0, 85, 85, 89, 97, 100, 107, 115, 118, 125, + 129, 136, 140, 147, 154, 162, 165, 172, 176, 183, + 187, 191, 195, 199, 207, 210, 214, 222, 225, 229, + 234, 242, 245, 249, 253, 261, 264, 268, 276, 279, + 283, 291, 299, 302 +}; +#endif + +#if YYDEBUG || YYERROR_VERBOSE || YYTOKEN_TABLE +/* YYTNAME[SYMBOL-NUM] -- String name of the symbol SYMBOL-NUM. + First, the terminals, then, starting at YYNTOKENS, nonterminals. */ +static const char *const yytname[] = +{ + "$end", "error", "$undefined", "DT_V1", "DT_MEMRESERVE", + "DT_PROPNODENAME", "DT_LITERAL", "DT_LEGACYLITERAL", "DT_BASE", + "DT_BYTE", "DT_STRING", "DT_LABEL", "DT_REF", "';'", "'-'", "'/'", "'{'", + "'}'", "'='", "'<'", "'>'", "'['", "']'", "','", "$accept", "sourcefile", + "memreserves", "memreserve", "v0_memreserves", "v0_memreserve", "addr", + "devicetree", "nodedef", "proplist", "propdef", "propdata", + "propdataprefix", "celllist", "cellbase", "cellval", "bytestring", + "subnodes", "subnode", "label", 0 +}; +#endif + +# ifdef YYPRINT +/* YYTOKNUM[YYLEX-NUM] -- Internal token number corresponding to + token YYLEX-NUM. */ +static const yytype_uint16 yytoknum[] = +{ + 0, 256, 257, 258, 259, 260, 261, 262, 263, 264, + 265, 266, 267, 59, 45, 47, 123, 125, 61, 60, + 62, 91, 93, 44 +}; +# endif + +/* YYR1[YYN] -- Symbol number of symbol that rule YYN derives. */ +static const yytype_uint8 yyr1[] = +{ + 0, 24, 25, 25, 26, 26, 27, 28, 28, 29, + 29, 30, 30, 31, 32, 33, 33, 34, 34, 35, + 35, 35, 35, 35, 36, 36, 36, 37, 37, 37, + 37, 38, 38, 39, 39, 40, 40, 40, 41, 41, + 41, 42, 43, 43 +}; + +/* YYR2[YYN] -- Number of symbols composing right hand side of rule YYN. */ +static const yytype_uint8 yyr2[] = +{ + 0, 2, 4, 2, 0, 2, 5, 0, 2, 1, + 6, 1, 1, 2, 5, 0, 2, 5, 3, 2, + 4, 4, 2, 2, 0, 2, 2, 0, 2, 2, + 2, 0, 1, 1, 2, 0, 2, 2, 0, 2, + 2, 3, 0, 1 +}; + +/* YYDEFACT[STATE-NAME] -- Default rule to reduce with in state + STATE-NUM when YYTABLE doesn't specify something else to do. Zero + means the default is an error. */ +static const yytype_uint8 yydefact[] = +{ + 7, 0, 43, 0, 9, 0, 7, 0, 4, 1, + 0, 3, 8, 0, 0, 4, 0, 15, 13, 11, + 12, 0, 2, 5, 0, 38, 0, 0, 0, 16, + 0, 38, 0, 0, 6, 0, 40, 39, 0, 10, + 14, 18, 24, 41, 0, 0, 23, 17, 25, 19, + 26, 22, 27, 35, 31, 0, 33, 32, 30, 29, + 20, 0, 28, 36, 37, 21, 34 +}; + +/* YYDEFGOTO[NTERM-NUM]. */ +static const yytype_int8 yydefgoto[] = +{ + -1, 3, 14, 4, 5, 6, 27, 11, 18, 25, + 29, 44, 45, 54, 61, 62, 55, 30, 31, 7 +}; + +/* YYPACT[STATE-NUM] -- Index in YYTABLE of the portion describing + STATE-NUM. */ +#define YYPACT_NINF -13 +static const yytype_int8 yypact[] = +{ + 23, 11, -13, 37, -13, -4, 18, 39, 18, -13, + 28, -13, -13, 34, -4, 18, 41, -13, -13, -13, + -13, 25, -13, -13, 34, -3, 34, 33, 34, -13, + 30, -3, 43, 36, -13, 38, -13, -13, 20, -13, + -13, -13, -13, -13, 2, 9, -13, -13, -13, -13, + -13, -13, -13, -13, -2, -6, -13, -13, -13, -13, + -13, 45, -13, -13, -13, -13, -13 +}; + +/* YYPGOTO[NTERM-NUM]. */ +static const yytype_int8 yypgoto[] = +{ + -13, -13, 35, 27, 47, -13, -12, 40, 17, -13, + 26, -13, -13, -13, -13, -13, -13, 29, -13, -8 +}; + +/* YYTABLE[YYPACT[STATE-NUM]]. What to do in state STATE-NUM. If + positive, shift that token. If negative, reduce the rule which + number is the opposite. If zero, do what YYDEFACT says. + If YYTABLE_NINF, syntax error. */ +#define YYTABLE_NINF -43 +static const yytype_int8 yytable[] = +{ + 16, 21, -42, 63, 56, 64, 57, 16, 2, 58, + 59, 10, 28, 46, 33, 47, 65, 32, 60, 49, + 50, 51, -42, 32, 8, 48, 1, -42, 52, 2, + 53, 19, 20, 41, 2, 15, 17, 9, 42, 26, + 19, 20, 15, 13, 17, 24, 34, 35, 38, 39, + 23, 40, 66, 12, 22, 43, 0, 36, 0, 0, + 37 +}; + +static const yytype_int8 yycheck[] = +{ + 8, 13, 5, 9, 6, 11, 8, 15, 11, 11, + 12, 15, 24, 11, 26, 13, 22, 25, 20, 10, + 11, 12, 4, 31, 13, 23, 3, 4, 19, 11, + 21, 6, 7, 13, 11, 8, 16, 0, 18, 14, + 6, 7, 15, 4, 16, 4, 13, 17, 5, 13, + 15, 13, 7, 6, 14, 38, -1, 31, -1, -1, + 31 +}; + +/* YYSTOS[STATE-NUM] -- The (internal number of the) accessing + symbol of state STATE-NUM. */ +static const yytype_uint8 yystos[] = +{ + 0, 3, 11, 25, 27, 28, 29, 43, 13, 0, + 15, 31, 28, 4, 26, 27, 43, 16, 32, 6, + 7, 30, 31, 26, 4, 33, 14, 30, 30, 34, + 41, 42, 43, 30, 13, 17, 34, 41, 5, 13, + 13, 13, 18, 32, 35, 36, 11, 13, 23, 10, + 11, 12, 19, 21, 37, 40, 6, 8, 11, 12, + 20, 38, 39, 9, 11, 22, 7 +}; + +#define yyerrok (yyerrstatus = 0) +#define yyclearin (yychar = YYEMPTY) +#define YYEMPTY (-2) +#define YYEOF 0 + +#define YYACCEPT goto yyacceptlab +#define YYABORT goto yyabortlab +#define YYERROR goto yyerrorlab + + +/* Like YYERROR except do call yyerror. This remains here temporarily + to ease the transition to the new meaning of YYERROR, for GCC. + Once GCC version 2 has supplanted version 1, this can go. */ + +#define YYFAIL goto yyerrlab + +#define YYRECOVERING() (!!yyerrstatus) + +#define YYBACKUP(Token, Value) \ +do \ + if (yychar == YYEMPTY && yylen == 1) \ + { \ + yychar = (Token); \ + yylval = (Value); \ + yytoken = YYTRANSLATE (yychar); \ + YYPOPSTACK (1); \ + goto yybackup; \ + } \ + else \ + { \ + yyerror (YY_("syntax error: cannot back up")); \ + YYERROR; \ + } \ +while (YYID (0)) + + +#define YYTERROR 1 +#define YYERRCODE 256 + + +/* YYLLOC_DEFAULT -- Set CURRENT to span from RHS[1] to RHS[N]. + If N is 0, then set CURRENT to the empty location which ends + the previous symbol: RHS[0] (always defined). */ + +#define YYRHSLOC(Rhs, K) ((Rhs)[K]) +#ifndef YYLLOC_DEFAULT +# define YYLLOC_DEFAULT(Current, Rhs, N) \ + do \ + if (YYID (N)) \ + { \ + (Current).first_line = YYRHSLOC (Rhs, 1).first_line; \ + (Current).first_column = YYRHSLOC (Rhs, 1).first_column; \ + (Current).last_line = YYRHSLOC (Rhs, N).last_line; \ + (Current).last_column = YYRHSLOC (Rhs, N).last_column; \ + } \ + else \ + { \ + (Current).first_line = (Current).last_line = \ + YYRHSLOC (Rhs, 0).last_line; \ + (Current).first_column = (Current).last_column = \ + YYRHSLOC (Rhs, 0).last_column; \ + } \ + while (YYID (0)) +#endif + + +/* YY_LOCATION_PRINT -- Print the location on the stream. + This macro was not mandated originally: define only if we know + we won't break user code: when these are the locations we know. */ + +#ifndef YY_LOCATION_PRINT +# if YYLTYPE_IS_TRIVIAL +# define YY_LOCATION_PRINT(File, Loc) \ + fprintf (File, "%d.%d-%d.%d", \ + (Loc).first_line, (Loc).first_column, \ + (Loc).last_line, (Loc).last_column) +# else +# define YY_LOCATION_PRINT(File, Loc) ((void) 0) +# endif +#endif + + +/* YYLEX -- calling `yylex' with the right arguments. */ + +#ifdef YYLEX_PARAM +# define YYLEX yylex (YYLEX_PARAM) +#else +# define YYLEX yylex () +#endif + +/* Enable debugging if requested. */ +#if YYDEBUG + +# ifndef YYFPRINTF +# include <stdio.h> /* INFRINGES ON USER NAME SPACE */ +# define YYFPRINTF fprintf +# endif + +# define YYDPRINTF(Args) \ +do { \ + if (yydebug) \ + YYFPRINTF Args; \ +} while (YYID (0)) + +# define YY_SYMBOL_PRINT(Title, Type, Value, Location) \ +do { \ + if (yydebug) \ + { \ + YYFPRINTF (stderr, "%s ", Title); \ + yy_symbol_print (stderr, \ + Type, Value, Location); \ + YYFPRINTF (stderr, "\n"); \ + } \ +} while (YYID (0)) + + +/*--------------------------------. +| Print this symbol on YYOUTPUT. | +`--------------------------------*/ + +/*ARGSUSED*/ +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static void +yy_symbol_value_print (FILE *yyoutput, int yytype, YYSTYPE const * const yyvaluep, YYLTYPE const * const yylocationp) +#else +static void +yy_symbol_value_print (yyoutput, yytype, yyvaluep, yylocationp) + FILE *yyoutput; + int yytype; + YYSTYPE const * const yyvaluep; + YYLTYPE const * const yylocationp; +#endif +{ + if (!yyvaluep) + return; + YYUSE (yylocationp); +# ifdef YYPRINT + if (yytype < YYNTOKENS) + YYPRINT (yyoutput, yytoknum[yytype], *yyvaluep); +# else + YYUSE (yyoutput); +# endif + switch (yytype) + { + default: + break; + } +} + + +/*--------------------------------. +| Print this symbol on YYOUTPUT. | +`--------------------------------*/ + +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static void +yy_symbol_print (FILE *yyoutput, int yytype, YYSTYPE const * const yyvaluep, YYLTYPE const * const yylocationp) +#else +static void +yy_symbol_print (yyoutput, yytype, yyvaluep, yylocationp) + FILE *yyoutput; + int yytype; + YYSTYPE const * const yyvaluep; + YYLTYPE const * const yylocationp; +#endif +{ + if (yytype < YYNTOKENS) + YYFPRINTF (yyoutput, "token %s (", yytname[yytype]); + else + YYFPRINTF (yyoutput, "nterm %s (", yytname[yytype]); + + YY_LOCATION_PRINT (yyoutput, *yylocationp); + YYFPRINTF (yyoutput, ": "); + yy_symbol_value_print (yyoutput, yytype, yyvaluep, yylocationp); + YYFPRINTF (yyoutput, ")"); +} + +/*------------------------------------------------------------------. +| yy_stack_print -- Print the state stack from its BOTTOM up to its | +| TOP (included). | +`------------------------------------------------------------------*/ + +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static void +yy_stack_print (yytype_int16 *bottom, yytype_int16 *top) +#else +static void +yy_stack_print (bottom, top) + yytype_int16 *bottom; + yytype_int16 *top; +#endif +{ + YYFPRINTF (stderr, "Stack now"); + for (; bottom <= top; ++bottom) + YYFPRINTF (stderr, " %d", *bottom); + YYFPRINTF (stderr, "\n"); +} + +# define YY_STACK_PRINT(Bottom, Top) \ +do { \ + if (yydebug) \ + yy_stack_print ((Bottom), (Top)); \ +} while (YYID (0)) + + +/*------------------------------------------------. +| Report that the YYRULE is going to be reduced. | +`------------------------------------------------*/ + +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static void +yy_reduce_print (YYSTYPE *yyvsp, YYLTYPE *yylsp, int yyrule) +#else +static void +yy_reduce_print (yyvsp, yylsp, yyrule) + YYSTYPE *yyvsp; + YYLTYPE *yylsp; + int yyrule; +#endif +{ + int yynrhs = yyr2[yyrule]; + int yyi; + unsigned long int yylno = yyrline[yyrule]; + YYFPRINTF (stderr, "Reducing stack by rule %d (line %lu):\n", + yyrule - 1, yylno); + /* The symbols being reduced. */ + for (yyi = 0; yyi < yynrhs; yyi++) + { + fprintf (stderr, " $%d = ", yyi + 1); + yy_symbol_print (stderr, yyrhs[yyprhs[yyrule] + yyi], + &(yyvsp[(yyi + 1) - (yynrhs)]) + , &(yylsp[(yyi + 1) - (yynrhs)]) ); + fprintf (stderr, "\n"); + } +} + +# define YY_REDUCE_PRINT(Rule) \ +do { \ + if (yydebug) \ + yy_reduce_print (yyvsp, yylsp, Rule); \ +} while (YYID (0)) + +/* Nonzero means print parse trace. It is left uninitialized so that + multiple parsers can coexist. */ +int yydebug; +#else /* !YYDEBUG */ +# define YYDPRINTF(Args) +# define YY_SYMBOL_PRINT(Title, Type, Value, Location) +# define YY_STACK_PRINT(Bottom, Top) +# define YY_REDUCE_PRINT(Rule) +#endif /* !YYDEBUG */ + + +/* YYINITDEPTH -- initial size of the parser's stacks. */ +#ifndef YYINITDEPTH +# define YYINITDEPTH 200 +#endif + +/* YYMAXDEPTH -- maximum size the stacks can grow to (effective only + if the built-in stack extension method is used). + + Do not make this value too large; the results are undefined if + YYSTACK_ALLOC_MAXIMUM < YYSTACK_BYTES (YYMAXDEPTH) + evaluated with infinite-precision integer arithmetic. */ + +#ifndef YYMAXDEPTH +# define YYMAXDEPTH 10000 +#endif + + + +#if YYERROR_VERBOSE + +# ifndef yystrlen +# if defined __GLIBC__ && defined _STRING_H +# define yystrlen strlen +# else +/* Return the length of YYSTR. */ +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static YYSIZE_T +yystrlen (const char *yystr) +#else +static YYSIZE_T +yystrlen (yystr) + const char *yystr; +#endif +{ + YYSIZE_T yylen; + for (yylen = 0; yystr[yylen]; yylen++) + continue; + return yylen; +} +# endif +# endif + +# ifndef yystpcpy +# if defined __GLIBC__ && defined _STRING_H && defined _GNU_SOURCE +# define yystpcpy stpcpy +# else +/* Copy YYSRC to YYDEST, returning the address of the terminating '\0' in + YYDEST. */ +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static char * +yystpcpy (char *yydest, const char *yysrc) +#else +static char * +yystpcpy (yydest, yysrc) + char *yydest; + const char *yysrc; +#endif +{ + char *yyd = yydest; + const char *yys = yysrc; + + while ((*yyd++ = *yys++) != '\0') + continue; + + return yyd - 1; +} +# endif +# endif + +# ifndef yytnamerr +/* Copy to YYRES the contents of YYSTR after stripping away unnecessary + quotes and backslashes, so that it's suitable for yyerror. The + heuristic is that double-quoting is unnecessary unless the string + contains an apostrophe, a comma, or backslash (other than + backslash-backslash). YYSTR is taken from yytname. If YYRES is + null, do not copy; instead, return the length of what the result + would have been. */ +static YYSIZE_T +yytnamerr (char *yyres, const char *yystr) +{ + if (*yystr == '"') + { + YYSIZE_T yyn = 0; + char const *yyp = yystr; + + for (;;) + switch (*++yyp) + { + case '\'': + case ',': + goto do_not_strip_quotes; + + case '\\': + if (*++yyp != '\\') + goto do_not_strip_quotes; + /* Fall through. */ + default: + if (yyres) + yyres[yyn] = *yyp; + yyn++; + break; + + case '"': + if (yyres) + yyres[yyn] = '\0'; + return yyn; + } + do_not_strip_quotes: ; + } + + if (! yyres) + return yystrlen (yystr); + + return yystpcpy (yyres, yystr) - yyres; +} +# endif + +/* Copy into YYRESULT an error message about the unexpected token + YYCHAR while in state YYSTATE. Return the number of bytes copied, + including the terminating null byte. If YYRESULT is null, do not + copy anything; just return the number of bytes that would be + copied. As a special case, return 0 if an ordinary "syntax error" + message will do. Return YYSIZE_MAXIMUM if overflow occurs during + size calculation. */ +static YYSIZE_T +yysyntax_error (char *yyresult, int yystate, int yychar) +{ + int yyn = yypact[yystate]; + + if (! (YYPACT_NINF < yyn && yyn <= YYLAST)) + return 0; + else + { + int yytype = YYTRANSLATE (yychar); + YYSIZE_T yysize0 = yytnamerr (0, yytname[yytype]); + YYSIZE_T yysize = yysize0; + YYSIZE_T yysize1; + int yysize_overflow = 0; + enum { YYERROR_VERBOSE_ARGS_MAXIMUM = 5 }; + char const *yyarg[YYERROR_VERBOSE_ARGS_MAXIMUM]; + int yyx; + +# if 0 + /* This is so xgettext sees the translatable formats that are + constructed on the fly. */ + YY_("syntax error, unexpected %s"); + YY_("syntax error, unexpected %s, expecting %s"); + YY_("syntax error, unexpected %s, expecting %s or %s"); + YY_("syntax error, unexpected %s, expecting %s or %s or %s"); + YY_("syntax error, unexpected %s, expecting %s or %s or %s or %s"); +# endif + char *yyfmt; + char const *yyf; + static char const yyunexpected[] = "syntax error, unexpected %s"; + static char const yyexpecting[] = ", expecting %s"; + static char const yyor[] = " or %s"; + char yyformat[sizeof yyunexpected + + sizeof yyexpecting - 1 + + ((YYERROR_VERBOSE_ARGS_MAXIMUM - 2) + * (sizeof yyor - 1))]; + char const *yyprefix = yyexpecting; + + /* Start YYX at -YYN if negative to avoid negative indexes in + YYCHECK. */ + int yyxbegin = yyn < 0 ? -yyn : 0; + + /* Stay within bounds of both yycheck and yytname. */ + int yychecklim = YYLAST - yyn + 1; + int yyxend = yychecklim < YYNTOKENS ? yychecklim : YYNTOKENS; + int yycount = 1; + + yyarg[0] = yytname[yytype]; + yyfmt = yystpcpy (yyformat, yyunexpected); + + for (yyx = yyxbegin; yyx < yyxend; ++yyx) + if (yycheck[yyx + yyn] == yyx && yyx != YYTERROR) + { + if (yycount == YYERROR_VERBOSE_ARGS_MAXIMUM) + { + yycount = 1; + yysize = yysize0; + yyformat[sizeof yyunexpected - 1] = '\0'; + break; + } + yyarg[yycount++] = yytname[yyx]; + yysize1 = yysize + yytnamerr (0, yytname[yyx]); + yysize_overflow |= (yysize1 < yysize); + yysize = yysize1; + yyfmt = yystpcpy (yyfmt, yyprefix); + yyprefix = yyor; + } + + yyf = YY_(yyformat); + yysize1 = yysize + yystrlen (yyf); + yysize_overflow |= (yysize1 < yysize); + yysize = yysize1; + + if (yysize_overflow) + return YYSIZE_MAXIMUM; + + if (yyresult) + { + /* Avoid sprintf, as that infringes on the user's name space. + Don't have undefined behavior even if the translation + produced a string with the wrong number of "%s"s. */ + char *yyp = yyresult; + int yyi = 0; + while ((*yyp = *yyf) != '\0') + { + if (*yyp == '%' && yyf[1] == 's' && yyi < yycount) + { + yyp += yytnamerr (yyp, yyarg[yyi++]); + yyf += 2; + } + else + { + yyp++; + yyf++; + } + } + } + return yysize; + } +} +#endif /* YYERROR_VERBOSE */ + + +/*-----------------------------------------------. +| Release the memory associated to this symbol. | +`-----------------------------------------------*/ + +/*ARGSUSED*/ +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static void +yydestruct (const char *yymsg, int yytype, YYSTYPE *yyvaluep, YYLTYPE *yylocationp) +#else +static void +yydestruct (yymsg, yytype, yyvaluep, yylocationp) + const char *yymsg; + int yytype; + YYSTYPE *yyvaluep; + YYLTYPE *yylocationp; +#endif +{ + YYUSE (yyvaluep); + YYUSE (yylocationp); + + if (!yymsg) + yymsg = "Deleting"; + YY_SYMBOL_PRINT (yymsg, yytype, yyvaluep, yylocationp); + + switch (yytype) + { + + default: + break; + } +} + + +/* Prevent warnings from -Wmissing-prototypes. */ + +#ifdef YYPARSE_PARAM +#if defined __STDC__ || defined __cplusplus +int yyparse (void *YYPARSE_PARAM); +#else +int yyparse (); +#endif +#else /* ! YYPARSE_PARAM */ +#if defined __STDC__ || defined __cplusplus +int yyparse (void); +#else +int yyparse (); +#endif +#endif /* ! YYPARSE_PARAM */ + + + +/* The look-ahead symbol. */ +int yychar; + +/* The semantic value of the look-ahead symbol. */ +YYSTYPE yylval; + +/* Number of syntax errors so far. */ +int yynerrs; +/* Location data for the look-ahead symbol. */ +YYLTYPE yylloc; + + + +/*----------. +| yyparse. | +`----------*/ + +#ifdef YYPARSE_PARAM +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +int +yyparse (void *YYPARSE_PARAM) +#else +int +yyparse (YYPARSE_PARAM) + void *YYPARSE_PARAM; +#endif +#else /* ! YYPARSE_PARAM */ +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +int +yyparse (void) +#else +int +yyparse () + +#endif +#endif +{ + + int yystate; + int yyn; + int yyresult; + /* Number of tokens to shift before error messages enabled. */ + int yyerrstatus; + /* Look-ahead token as an internal (translated) token number. */ + int yytoken = 0; +#if YYERROR_VERBOSE + /* Buffer for error messages, and its allocated size. */ + char yymsgbuf[128]; + char *yymsg = yymsgbuf; + YYSIZE_T yymsg_alloc = sizeof yymsgbuf; +#endif + + /* Three stacks and their tools: + `yyss': related to states, + `yyvs': related to semantic values, + `yyls': related to locations. + + Refer to the stacks thru separate pointers, to allow yyoverflow + to reallocate them elsewhere. */ + + /* The state stack. */ + yytype_int16 yyssa[YYINITDEPTH]; + yytype_int16 *yyss = yyssa; + yytype_int16 *yyssp; + + /* The semantic value stack. */ + YYSTYPE yyvsa[YYINITDEPTH]; + YYSTYPE *yyvs = yyvsa; + YYSTYPE *yyvsp; + + /* The location stack. */ + YYLTYPE yylsa[YYINITDEPTH]; + YYLTYPE *yyls = yylsa; + YYLTYPE *yylsp; + /* The locations where the error started and ended. */ + YYLTYPE yyerror_range[2]; + +#define YYPOPSTACK(N) (yyvsp -= (N), yyssp -= (N), yylsp -= (N)) + + YYSIZE_T yystacksize = YYINITDEPTH; + + /* The variables used to return semantic value and location from the + action routines. */ + YYSTYPE yyval; + YYLTYPE yyloc; + + /* The number of symbols on the RHS of the reduced rule. + Keep to zero when no symbol should be popped. */ + int yylen = 0; + + YYDPRINTF ((stderr, "Starting parse\n")); + + yystate = 0; + yyerrstatus = 0; + yynerrs = 0; + yychar = YYEMPTY; /* Cause a token to be read. */ + + /* Initialize stack pointers. + Waste one element of value and location stack + so that they stay on the same level as the state stack. + The wasted elements are never initialized. */ + + yyssp = yyss; + yyvsp = yyvs; + yylsp = yyls; +#if YYLTYPE_IS_TRIVIAL + /* Initialize the default location before parsing starts. */ + yylloc.first_line = yylloc.last_line = 1; + yylloc.first_column = yylloc.last_column = 0; +#endif + + goto yysetstate; + +/*------------------------------------------------------------. +| yynewstate -- Push a new state, which is found in yystate. | +`------------------------------------------------------------*/ + yynewstate: + /* In all cases, when you get here, the value and location stacks + have just been pushed. So pushing a state here evens the stacks. */ + yyssp++; + + yysetstate: + *yyssp = yystate; + + if (yyss + yystacksize - 1 <= yyssp) + { + /* Get the current used size of the three stacks, in elements. */ + YYSIZE_T yysize = yyssp - yyss + 1; + +#ifdef yyoverflow + { + /* Give user a chance to reallocate the stack. Use copies of + these so that the &'s don't force the real ones into + memory. */ + YYSTYPE *yyvs1 = yyvs; + yytype_int16 *yyss1 = yyss; + YYLTYPE *yyls1 = yyls; + + /* Each stack pointer address is followed by the size of the + data in use in that stack, in bytes. This used to be a + conditional around just the two extra args, but that might + be undefined if yyoverflow is a macro. */ + yyoverflow (YY_("memory exhausted"), + &yyss1, yysize * sizeof (*yyssp), + &yyvs1, yysize * sizeof (*yyvsp), + &yyls1, yysize * sizeof (*yylsp), + &yystacksize); + yyls = yyls1; + yyss = yyss1; + yyvs = yyvs1; + } +#else /* no yyoverflow */ +# ifndef YYSTACK_RELOCATE + goto yyexhaustedlab; +# else + /* Extend the stack our own way. */ + if (YYMAXDEPTH <= yystacksize) + goto yyexhaustedlab; + yystacksize *= 2; + if (YYMAXDEPTH < yystacksize) + yystacksize = YYMAXDEPTH; + + { + yytype_int16 *yyss1 = yyss; + union yyalloc *yyptr = + (union yyalloc *) YYSTACK_ALLOC (YYSTACK_BYTES (yystacksize)); + if (! yyptr) + goto yyexhaustedlab; + YYSTACK_RELOCATE (yyss); + YYSTACK_RELOCATE (yyvs); + YYSTACK_RELOCATE (yyls); +# undef YYSTACK_RELOCATE + if (yyss1 != yyssa) + YYSTACK_FREE (yyss1); + } +# endif +#endif /* no yyoverflow */ + + yyssp = yyss + yysize - 1; + yyvsp = yyvs + yysize - 1; + yylsp = yyls + yysize - 1; + + YYDPRINTF ((stderr, "Stack size increased to %lu\n", + (unsigned long int) yystacksize)); + + if (yyss + yystacksize - 1 <= yyssp) + YYABORT; + } + + YYDPRINTF ((stderr, "Entering state %d\n", yystate)); + + goto yybackup; + +/*-----------. +| yybackup. | +`-----------*/ +yybackup: + + /* Do appropriate processing given the current state. Read a + look-ahead token if we need one and don't already have one. */ + + /* First try to decide what to do without reference to look-ahead token. */ + yyn = yypact[yystate]; + if (yyn == YYPACT_NINF) + goto yydefault; + + /* Not known => get a look-ahead token if don't already have one. */ + + /* YYCHAR is either YYEMPTY or YYEOF or a valid look-ahead symbol. */ + if (yychar == YYEMPTY) + { + YYDPRINTF ((stderr, "Reading a token: ")); + yychar = YYLEX; + } + + if (yychar <= YYEOF) + { + yychar = yytoken = YYEOF; + YYDPRINTF ((stderr, "Now at end of input.\n")); + } + else + { + yytoken = YYTRANSLATE (yychar); + YY_SYMBOL_PRINT ("Next token is", yytoken, &yylval, &yylloc); + } + + /* If the proper action on seeing token YYTOKEN is to reduce or to + detect an error, take that action. */ + yyn += yytoken; + if (yyn < 0 || YYLAST < yyn || yycheck[yyn] != yytoken) + goto yydefault; + yyn = yytable[yyn]; + if (yyn <= 0) + { + if (yyn == 0 || yyn == YYTABLE_NINF) + goto yyerrlab; + yyn = -yyn; + goto yyreduce; + } + + if (yyn == YYFINAL) + YYACCEPT; + + /* Count tokens shifted since error; after three, turn off error + status. */ + if (yyerrstatus) + yyerrstatus--; + + /* Shift the look-ahead token. */ + YY_SYMBOL_PRINT ("Shifting", yytoken, &yylval, &yylloc); + + /* Discard the shifted token unless it is eof. */ + if (yychar != YYEOF) + yychar = YYEMPTY; + + yystate = yyn; + *++yyvsp = yylval; + *++yylsp = yylloc; + goto yynewstate; + + +/*-----------------------------------------------------------. +| yydefault -- do the default action for the current state. | +`-----------------------------------------------------------*/ +yydefault: + yyn = yydefact[yystate]; + if (yyn == 0) + goto yyerrlab; + goto yyreduce; + + +/*-----------------------------. +| yyreduce -- Do a reduction. | +`-----------------------------*/ +yyreduce: + /* yyn is the number of a rule to reduce with. */ + yylen = yyr2[yyn]; + + /* If YYLEN is nonzero, implement the default value of the action: + `$$ = $1'. + + Otherwise, the following line sets YYVAL to garbage. + This behavior is undocumented and Bison + users should not rely upon it. Assigning to YYVAL + unconditionally makes the parser a bit smaller, and it avoids a + GCC warning that YYVAL may be used uninitialized. */ + yyval = yyvsp[1-yylen]; + + /* Default location. */ + YYLLOC_DEFAULT (yyloc, (yylsp - yylen), yylen); + YY_REDUCE_PRINT (yyn); + switch (yyn) + { + case 2: +#line 86 "dtc-parser.y" + { + the_boot_info = build_boot_info((yyvsp[(3) - (4)].re), (yyvsp[(4) - (4)].node)); + ;} + break; + + case 3: +#line 90 "dtc-parser.y" + { + the_boot_info = build_boot_info((yyvsp[(1) - (2)].re), (yyvsp[(2) - (2)].node)); + ;} + break; + + case 4: +#line 97 "dtc-parser.y" + { + (yyval.re) = NULL; + ;} + break; + + case 5: +#line 101 "dtc-parser.y" + { + (yyval.re) = chain_reserve_entry((yyvsp[(1) - (2)].re), (yyvsp[(2) - (2)].re)); + ;} + break; + + case 6: +#line 108 "dtc-parser.y" + { + (yyval.re) = build_reserve_entry((yyvsp[(3) - (5)].addr), (yyvsp[(4) - (5)].addr), (yyvsp[(1) - (5)].labelref)); + ;} + break; + + case 7: +#line 115 "dtc-parser.y" + { + (yyval.re) = NULL; + ;} + break; + + case 8: +#line 119 "dtc-parser.y" + { + (yyval.re) = chain_reserve_entry((yyvsp[(1) - (2)].re), (yyvsp[(2) - (2)].re)); + ;} + break; + + case 9: +#line 126 "dtc-parser.y" + { + (yyval.re) = (yyvsp[(1) - (1)].re); + ;} + break; + + case 10: +#line 130 "dtc-parser.y" + { + (yyval.re) = build_reserve_entry((yyvsp[(3) - (6)].addr), (yyvsp[(5) - (6)].addr) - (yyvsp[(3) - (6)].addr) + 1, (yyvsp[(1) - (6)].labelref)); + ;} + break; + + case 11: +#line 137 "dtc-parser.y" + { + (yyval.addr) = eval_literal((yyvsp[(1) - (1)].literal), 0, 64); + ;} + break; + + case 12: +#line 141 "dtc-parser.y" + { + (yyval.addr) = eval_literal((yyvsp[(1) - (1)].literal), 16, 64); + ;} + break; + + case 13: +#line 148 "dtc-parser.y" + { + (yyval.node) = name_node((yyvsp[(2) - (2)].node), "", NULL); + ;} + break; + + case 14: +#line 155 "dtc-parser.y" + { + (yyval.node) = build_node((yyvsp[(2) - (5)].proplist), (yyvsp[(3) - (5)].nodelist)); + ;} + break; + + case 15: +#line 162 "dtc-parser.y" + { + (yyval.proplist) = NULL; + ;} + break; + + case 16: +#line 166 "dtc-parser.y" + { + (yyval.proplist) = chain_property((yyvsp[(2) - (2)].prop), (yyvsp[(1) - (2)].proplist)); + ;} + break; + + case 17: +#line 173 "dtc-parser.y" + { + (yyval.prop) = build_property((yyvsp[(2) - (5)].propnodename), (yyvsp[(4) - (5)].data), (yyvsp[(1) - (5)].labelref)); + ;} + break; + + case 18: +#line 177 "dtc-parser.y" + { + (yyval.prop) = build_property((yyvsp[(2) - (3)].propnodename), empty_data, (yyvsp[(1) - (3)].labelref)); + ;} + break; + + case 19: +#line 184 "dtc-parser.y" + { + (yyval.data) = data_merge((yyvsp[(1) - (2)].data), (yyvsp[(2) - (2)].data)); + ;} + break; + + case 20: +#line 188 "dtc-parser.y" + { + (yyval.data) = data_merge((yyvsp[(1) - (4)].data), (yyvsp[(3) - (4)].data)); + ;} + break; + + case 21: +#line 192 "dtc-parser.y" + { + (yyval.data) = data_merge((yyvsp[(1) - (4)].data), (yyvsp[(3) - (4)].data)); + ;} + break; + + case 22: +#line 196 "dtc-parser.y" + { + (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), REF_PATH, (yyvsp[(2) - (2)].labelref)); + ;} + break; + + case 23: +#line 200 "dtc-parser.y" + { + (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref)); + ;} + break; + + case 24: +#line 207 "dtc-parser.y" + { + (yyval.data) = empty_data; + ;} + break; + + case 25: +#line 211 "dtc-parser.y" + { + (yyval.data) = (yyvsp[(1) - (2)].data); + ;} + break; + + case 26: +#line 215 "dtc-parser.y" + { + (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref)); + ;} + break; + + case 27: +#line 222 "dtc-parser.y" + { + (yyval.data) = empty_data; + ;} + break; + + case 28: +#line 226 "dtc-parser.y" + { + (yyval.data) = data_append_cell((yyvsp[(1) - (2)].data), (yyvsp[(2) - (2)].cell)); + ;} + break; + + case 29: +#line 230 "dtc-parser.y" + { + (yyval.data) = data_append_cell(data_add_marker((yyvsp[(1) - (2)].data), REF_PHANDLE, + (yyvsp[(2) - (2)].labelref)), -1); + ;} + break; + + case 30: +#line 235 "dtc-parser.y" + { + (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref)); + ;} + break; + + case 31: +#line 242 "dtc-parser.y" + { + (yyval.cbase) = 16; + ;} + break; + + case 33: +#line 250 "dtc-parser.y" + { + (yyval.cell) = eval_literal((yyvsp[(1) - (1)].literal), 0, 32); + ;} + break; + + case 34: +#line 254 "dtc-parser.y" + { + (yyval.cell) = eval_literal((yyvsp[(2) - (2)].literal), (yyvsp[(1) - (2)].cbase), 32); + ;} + break; + + case 35: +#line 261 "dtc-parser.y" + { + (yyval.data) = empty_data; + ;} + break; + + case 36: +#line 265 "dtc-parser.y" + { + (yyval.data) = data_append_byte((yyvsp[(1) - (2)].data), (yyvsp[(2) - (2)].byte)); + ;} + break; + + case 37: +#line 269 "dtc-parser.y" + { + (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref)); + ;} + break; + + case 38: +#line 276 "dtc-parser.y" + { + (yyval.nodelist) = NULL; + ;} + break; + + case 39: +#line 280 "dtc-parser.y" + { + (yyval.nodelist) = chain_node((yyvsp[(1) - (2)].node), (yyvsp[(2) - (2)].nodelist)); + ;} + break; + + case 40: +#line 284 "dtc-parser.y" + { + yyerror("syntax error: properties must precede subnodes\n"); + YYERROR; + ;} + break; + + case 41: +#line 292 "dtc-parser.y" + { + (yyval.node) = name_node((yyvsp[(3) - (3)].node), (yyvsp[(2) - (3)].propnodename), (yyvsp[(1) - (3)].labelref)); + ;} + break; + + case 42: +#line 299 "dtc-parser.y" + { + (yyval.labelref) = NULL; + ;} + break; + + case 43: +#line 303 "dtc-parser.y" + { + (yyval.labelref) = (yyvsp[(1) - (1)].labelref); + ;} + break; + + +/* Line 1267 of yacc.c. */ +#line 1734 "dtc-parser.tab.c" + default: break; + } + YY_SYMBOL_PRINT ("-> $$ =", yyr1[yyn], &yyval, &yyloc); + + YYPOPSTACK (yylen); + yylen = 0; + YY_STACK_PRINT (yyss, yyssp); + + *++yyvsp = yyval; + *++yylsp = yyloc; + + /* Now `shift' the result of the reduction. Determine what state + that goes to, based on the state we popped back to and the rule + number reduced by. */ + + yyn = yyr1[yyn]; + + yystate = yypgoto[yyn - YYNTOKENS] + *yyssp; + if (0 <= yystate && yystate <= YYLAST && yycheck[yystate] == *yyssp) + yystate = yytable[yystate]; + else + yystate = yydefgoto[yyn - YYNTOKENS]; + + goto yynewstate; + + +/*------------------------------------. +| yyerrlab -- here on detecting error | +`------------------------------------*/ +yyerrlab: + /* If not already recovering from an error, report this error. */ + if (!yyerrstatus) + { + ++yynerrs; +#if ! YYERROR_VERBOSE + yyerror (YY_("syntax error")); +#else + { + YYSIZE_T yysize = yysyntax_error (0, yystate, yychar); + if (yymsg_alloc < yysize && yymsg_alloc < YYSTACK_ALLOC_MAXIMUM) + { + YYSIZE_T yyalloc = 2 * yysize; + if (! (yysize <= yyalloc && yyalloc <= YYSTACK_ALLOC_MAXIMUM)) + yyalloc = YYSTACK_ALLOC_MAXIMUM; + if (yymsg != yymsgbuf) + YYSTACK_FREE (yymsg); + yymsg = (char *) YYSTACK_ALLOC (yyalloc); + if (yymsg) + yymsg_alloc = yyalloc; + else + { + yymsg = yymsgbuf; + yymsg_alloc = sizeof yymsgbuf; + } + } + + if (0 < yysize && yysize <= yymsg_alloc) + { + (void) yysyntax_error (yymsg, yystate, yychar); + yyerror (yymsg); + } + else + { + yyerror (YY_("syntax error")); + if (yysize != 0) + goto yyexhaustedlab; + } + } +#endif + } + + yyerror_range[0] = yylloc; + + if (yyerrstatus == 3) + { + /* If just tried and failed to reuse look-ahead token after an + error, discard it. */ + + if (yychar <= YYEOF) + { + /* Return failure if at end of input. */ + if (yychar == YYEOF) + YYABORT; + } + else + { + yydestruct ("Error: discarding", + yytoken, &yylval, &yylloc); + yychar = YYEMPTY; + } + } + + /* Else will try to reuse look-ahead token after shifting the error + token. */ + goto yyerrlab1; + + +/*---------------------------------------------------. +| yyerrorlab -- error raised explicitly by YYERROR. | +`---------------------------------------------------*/ +yyerrorlab: + + /* Pacify compilers like GCC when the user code never invokes + YYERROR and the label yyerrorlab therefore never appears in user + code. */ + if (/*CONSTCOND*/ 0) + goto yyerrorlab; + + yyerror_range[0] = yylsp[1-yylen]; + /* Do not reclaim the symbols of the rule which action triggered + this YYERROR. */ + YYPOPSTACK (yylen); + yylen = 0; + YY_STACK_PRINT (yyss, yyssp); + yystate = *yyssp; + goto yyerrlab1; + + +/*-------------------------------------------------------------. +| yyerrlab1 -- common code for both syntax error and YYERROR. | +`-------------------------------------------------------------*/ +yyerrlab1: + yyerrstatus = 3; /* Each real token shifted decrements this. */ + + for (;;) + { + yyn = yypact[yystate]; + if (yyn != YYPACT_NINF) + { + yyn += YYTERROR; + if (0 <= yyn && yyn <= YYLAST && yycheck[yyn] == YYTERROR) + { + yyn = yytable[yyn]; + if (0 < yyn) + break; + } + } + + /* Pop the current state because it cannot handle the error token. */ + if (yyssp == yyss) + YYABORT; + + yyerror_range[0] = *yylsp; + yydestruct ("Error: popping", + yystos[yystate], yyvsp, yylsp); + YYPOPSTACK (1); + yystate = *yyssp; + YY_STACK_PRINT (yyss, yyssp); + } + + if (yyn == YYFINAL) + YYACCEPT; + + *++yyvsp = yylval; + + yyerror_range[1] = yylloc; + /* Using YYLLOC is tempting, but would change the location of + the look-ahead. YYLOC is available though. */ + YYLLOC_DEFAULT (yyloc, (yyerror_range - 1), 2); + *++yylsp = yyloc; + + /* Shift the error token. */ + YY_SYMBOL_PRINT ("Shifting", yystos[yyn], yyvsp, yylsp); + + yystate = yyn; + goto yynewstate; + + +/*-------------------------------------. +| yyacceptlab -- YYACCEPT comes here. | +`-------------------------------------*/ +yyacceptlab: + yyresult = 0; + goto yyreturn; + +/*-----------------------------------. +| yyabortlab -- YYABORT comes here. | +`-----------------------------------*/ +yyabortlab: + yyresult = 1; + goto yyreturn; + +#ifndef yyoverflow +/*-------------------------------------------------. +| yyexhaustedlab -- memory exhaustion comes here. | +`-------------------------------------------------*/ +yyexhaustedlab: + yyerror (YY_("memory exhausted")); + yyresult = 2; + /* Fall through. */ +#endif + +yyreturn: + if (yychar != YYEOF && yychar != YYEMPTY) + yydestruct ("Cleanup: discarding lookahead", + yytoken, &yylval, &yylloc); + /* Do not reclaim the symbols of the rule which action triggered + this YYABORT or YYACCEPT. */ + YYPOPSTACK (yylen); + YY_STACK_PRINT (yyss, yyssp); + while (yyssp != yyss) + { + yydestruct ("Cleanup: popping", + yystos[*yyssp], yyvsp, yylsp); + YYPOPSTACK (1); + } +#ifndef yyoverflow + if (yyss != yyssa) + YYSTACK_FREE (yyss); +#endif +#if YYERROR_VERBOSE + if (yymsg != yymsgbuf) + YYSTACK_FREE (yymsg); +#endif + /* Make sure YYID is used. */ + return YYID (yyresult); +} + + +#line 308 "dtc-parser.y" + + +void yyerror (char const *s) +{ + const char *fname = srcpos_filename_for_num(yylloc.filenum); + + if (strcmp(fname, "-") == 0) + fname = "stdin"; + + fprintf(stderr, "%s:%d %s\n", + fname, yylloc.first_line, s); +} + +unsigned long long eval_literal(const char *s, int base, int bits) +{ + unsigned long long val; + char *e; + + errno = 0; + val = strtoull(s, &e, base); + if (*e) + yyerror("bad characters in literal"); + else if ((errno == ERANGE) + || ((bits < 64) && (val >= (1ULL << bits)))) + yyerror("literal out of range"); + else if (errno != 0) + yyerror("bad literal"); + return val; +} + diff --git a/arch/powerpc/boot/dtc-src/dtc-parser.tab.h_shipped b/arch/powerpc/boot/dtc-src/dtc-parser.tab.h_shipped new file mode 100644 index 00000000000..4707b029ed2 --- /dev/null +++ b/arch/powerpc/boot/dtc-src/dtc-parser.tab.h_shipped @@ -0,0 +1,111 @@ +/* A Bison parser, made by GNU Bison 2.3. */ + +/* Skeleton interface for Bison's Yacc-like parsers in C + + Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004, 2005, 2006 + Free Software Foundation, Inc. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, + Boston, MA 02110-1301, USA. */ + +/* As a special exception, you may create a larger work that contains + part or all of the Bison parser skeleton and distribute that work + under terms of your choice, so long as that work isn't itself a + parser generator using the skeleton or a modified version thereof + as a parser skeleton. Alternatively, if you modify or redistribute + the parser skeleton itself, you may (at your option) remove this + special exception, which will cause the skeleton and the resulting + Bison output files to be licensed under the GNU General Public + License without this special exception. + + This special exception was added by the Free Software Foundation in + version 2.2 of Bison. */ + +/* Tokens. */ +#ifndef YYTOKENTYPE +# define YYTOKENTYPE + /* Put the tokens into the symbol table, so that GDB and other debuggers + know about them. */ + enum yytokentype { + DT_V1 = 258, + DT_MEMRESERVE = 259, + DT_PROPNODENAME = 260, + DT_LITERAL = 261, + DT_LEGACYLITERAL = 262, + DT_BASE = 263, + DT_BYTE = 264, + DT_STRING = 265, + DT_LABEL = 266, + DT_REF = 267 + }; +#endif +/* Tokens. */ +#define DT_V1 258 +#define DT_MEMRESERVE 259 +#define DT_PROPNODENAME 260 +#define DT_LITERAL 261 +#define DT_LEGACYLITERAL 262 +#define DT_BASE 263 +#define DT_BYTE 264 +#define DT_STRING 265 +#define DT_LABEL 266 +#define DT_REF 267 + + + + +#if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED +typedef union YYSTYPE +#line 34 "dtc-parser.y" +{ + char *propnodename; + char *literal; + char *labelref; + unsigned int cbase; + u8 byte; + struct data data; + + u64 addr; + cell_t cell; + struct property *prop; + struct property *proplist; + struct node *node; + struct node *nodelist; + struct reserve_info *re; +} +/* Line 1489 of yacc.c. */ +#line 90 "dtc-parser.tab.h" + YYSTYPE; +# define yystype YYSTYPE /* obsolescent; will be withdrawn */ +# define YYSTYPE_IS_DECLARED 1 +# define YYSTYPE_IS_TRIVIAL 1 +#endif + +extern YYSTYPE yylval; + +#if ! defined YYLTYPE && ! defined YYLTYPE_IS_DECLARED +typedef struct YYLTYPE +{ + int first_line; + int first_column; + int last_line; + int last_column; +} YYLTYPE; +# define yyltype YYLTYPE /* obsolescent; will be withdrawn */ +# define YYLTYPE_IS_DECLARED 1 +# define YYLTYPE_IS_TRIVIAL 1 +#endif + +extern YYLTYPE yylloc; diff --git a/arch/powerpc/boot/dtc-src/dtc-parser.y b/arch/powerpc/boot/dtc-src/dtc-parser.y new file mode 100644 index 00000000000..002ea7fef18 --- /dev/null +++ b/arch/powerpc/boot/dtc-src/dtc-parser.y @@ -0,0 +1,336 @@ +/* + * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2005. + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + +%locations + +%{ +#include "dtc.h" +#include "srcpos.h" + +int yylex(void); +unsigned long long eval_literal(const char *s, int base, int bits); + +extern struct boot_info *the_boot_info; + +%} + +%union { + char *propnodename; + char *literal; + char *labelref; + unsigned int cbase; + u8 byte; + struct data data; + + u64 addr; + cell_t cell; + struct property *prop; + struct property *proplist; + struct node *node; + struct node *nodelist; + struct reserve_info *re; +} + +%token DT_V1 +%token DT_MEMRESERVE +%token <propnodename> DT_PROPNODENAME +%token <literal> DT_LITERAL +%token <literal> DT_LEGACYLITERAL +%token <cbase> DT_BASE +%token <byte> DT_BYTE +%token <data> DT_STRING +%token <labelref> DT_LABEL +%token <labelref> DT_REF + +%type <data> propdata +%type <data> propdataprefix +%type <re> memreserve +%type <re> memreserves +%type <re> v0_memreserve +%type <re> v0_memreserves +%type <addr> addr +%type <data> celllist +%type <cbase> cellbase +%type <cell> cellval +%type <data> bytestring +%type <prop> propdef +%type <proplist> proplist + +%type <node> devicetree +%type <node> nodedef +%type <node> subnode +%type <nodelist> subnodes +%type <labelref> label + +%% + +sourcefile: + DT_V1 ';' memreserves devicetree + { + the_boot_info = build_boot_info($3, $4); + } + | v0_memreserves devicetree + { + the_boot_info = build_boot_info($1, $2); + } + ; + +memreserves: + /* empty */ + { + $$ = NULL; + } + | memreserve memreserves + { + $$ = chain_reserve_entry($1, $2); + } + ; + +memreserve: + label DT_MEMRESERVE addr addr ';' + { + $$ = build_reserve_entry($3, $4, $1); + } + ; + +v0_memreserves: + /* empty */ + { + $$ = NULL; + } + | v0_memreserve v0_memreserves + { + $$ = chain_reserve_entry($1, $2); + }; + ; + +v0_memreserve: + memreserve + { + $$ = $1; + } + | label DT_MEMRESERVE addr '-' addr ';' + { + $$ = build_reserve_entry($3, $5 - $3 + 1, $1); + } + ; + +addr: + DT_LITERAL + { + $$ = eval_literal($1, 0, 64); + } + | DT_LEGACYLITERAL + { + $$ = eval_literal($1, 16, 64); + } + ; + +devicetree: + '/' nodedef + { + $$ = name_node($2, "", NULL); + } + ; + +nodedef: + '{' proplist subnodes '}' ';' + { + $$ = build_node($2, $3); + } + ; + +proplist: + /* empty */ + { + $$ = NULL; + } + | proplist propdef + { + $$ = chain_property($2, $1); + } + ; + +propdef: + label DT_PROPNODENAME '=' propdata ';' + { + $$ = build_property($2, $4, $1); + } + | label DT_PROPNODENAME ';' + { + $$ = build_property($2, empty_data, $1); + } + ; + +propdata: + propdataprefix DT_STRING + { + $$ = data_merge($1, $2); + } + | propdataprefix '<' celllist '>' + { + $$ = data_merge($1, $3); + } + | propdataprefix '[' bytestring ']' + { + $$ = data_merge($1, $3); + } + | propdataprefix DT_REF + { + $$ = data_add_marker($1, REF_PATH, $2); + } + | propdata DT_LABEL + { + $$ = data_add_marker($1, LABEL, $2); + } + ; + +propdataprefix: + /* empty */ + { + $$ = empty_data; + } + | propdata ',' + { + $$ = $1; + } + | propdataprefix DT_LABEL + { + $$ = data_add_marker($1, LABEL, $2); + } + ; + +celllist: + /* empty */ + { + $$ = empty_data; + } + | celllist cellval + { + $$ = data_append_cell($1, $2); + } + | celllist DT_REF + { + $$ = data_append_cell(data_add_marker($1, REF_PHANDLE, + $2), -1); + } + | celllist DT_LABEL + { + $$ = data_add_marker($1, LABEL, $2); + } + ; + +cellbase: + /* empty */ + { + $$ = 16; + } + | DT_BASE + ; + +cellval: + DT_LITERAL + { + $$ = eval_literal($1, 0, 32); + } + | cellbase DT_LEGACYLITERAL + { + $$ = eval_literal($2, $1, 32); + } + ; + +bytestring: + /* empty */ + { + $$ = empty_data; + } + | bytestring DT_BYTE + { + $$ = data_append_byte($1, $2); + } + | bytestring DT_LABEL + { + $$ = data_add_marker($1, LABEL, $2); + } + ; + +subnodes: + /* empty */ + { + $$ = NULL; + } + | subnode subnodes + { + $$ = chain_node($1, $2); + } + | subnode propdef + { + yyerror("syntax error: properties must precede subnodes\n"); + YYERROR; + } + ; + +subnode: + label DT_PROPNODENAME nodedef + { + $$ = name_node($3, $2, $1); + } + ; + +label: + /* empty */ + { + $$ = NULL; + } + | DT_LABEL + { + $$ = $1; + } + ; + +%% + +void yyerror (char const *s) +{ + const char *fname = srcpos_filename_for_num(yylloc.filenum); + + if (strcmp(fname, "-") == 0) + fname = "stdin"; + + fprintf(stderr, "%s:%d %s\n", + fname, yylloc.first_line, s); +} + +unsigned long long eval_literal(const char *s, int base, int bits) +{ + unsigned long long val; + char *e; + + errno = 0; + val = strtoull(s, &e, base); + if (*e) + yyerror("bad characters in literal"); + else if ((errno == ERANGE) + || ((bits < 64) && (val >= (1ULL << bits)))) + yyerror("literal out of range"); + else if (errno != 0) + yyerror("bad literal"); + return val; +} diff --git a/arch/powerpc/boot/dtc-src/dtc.c b/arch/powerpc/boot/dtc-src/dtc.c new file mode 100644 index 00000000000..01131d7c2d5 --- /dev/null +++ b/arch/powerpc/boot/dtc-src/dtc.c @@ -0,0 +1,231 @@ +/* + * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2005. + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + +#include "dtc.h" +#include "srcpos.h" + +#include "version_gen.h" + +/* + * Command line options + */ +int quiet; /* Level of quietness */ +int reservenum; /* Number of memory reservation slots */ +int minsize; /* Minimum blob size */ +int padsize; /* Additional padding to blob */ + +char *join_path(const char *path, const char *name) +{ + int lenp = strlen(path); + int lenn = strlen(name); + int len; + int needslash = 1; + char *str; + + len = lenp + lenn + 2; + if ((lenp > 0) && (path[lenp-1] == '/')) { + needslash = 0; + len--; + } + + str = xmalloc(len); + memcpy(str, path, lenp); + if (needslash) { + str[lenp] = '/'; + lenp++; + } + memcpy(str+lenp, name, lenn+1); + return str; +} + +void fill_fullpaths(struct node *tree, const char *prefix) +{ + struct node *child; + const char *unit; + + tree->fullpath = join_path(prefix, tree->name); + + unit = strchr(tree->name, '@'); + if (unit) + tree->basenamelen = unit - tree->name; + else + tree->basenamelen = strlen(tree->name); + + for_each_child(tree, child) + fill_fullpaths(child, tree->fullpath); +} + +static void __attribute__ ((noreturn)) usage(void) +{ + fprintf(stderr, "Usage:\n"); + fprintf(stderr, "\tdtc [options] <input file>\n"); + fprintf(stderr, "\nOptions:\n"); + fprintf(stderr, "\t-h\n"); + fprintf(stderr, "\t\tThis help text\n"); + fprintf(stderr, "\t-q\n"); + fprintf(stderr, "\t\tQuiet: -q suppress warnings, -qq errors, -qqq all\n"); + fprintf(stderr, "\t-I <input format>\n"); + fprintf(stderr, "\t\tInput formats are:\n"); + fprintf(stderr, "\t\t\tdts - device tree source text\n"); + fprintf(stderr, "\t\t\tdtb - device tree blob\n"); + fprintf(stderr, "\t\t\tfs - /proc/device-tree style directory\n"); + fprintf(stderr, "\t-o <output file>\n"); + fprintf(stderr, "\t-O <output format>\n"); + fprintf(stderr, "\t\tOutput formats are:\n"); + fprintf(stderr, "\t\t\tdts - device tree source text\n"); + fprintf(stderr, "\t\t\tdtb - device tree blob\n"); + fprintf(stderr, "\t\t\tasm - assembler source\n"); + fprintf(stderr, "\t-V <output version>\n"); + fprintf(stderr, "\t\tBlob version to produce, defaults to %d (relevant for dtb\n\t\tand asm output only)\n", DEFAULT_FDT_VERSION); + fprintf(stderr, "\t-R <number>\n"); + fprintf(stderr, "\t\tMake space for <number> reserve map entries (relevant for \n\t\tdtb and asm output only)\n"); + fprintf(stderr, "\t-S <bytes>\n"); + fprintf(stderr, "\t\tMake the blob at least <bytes> long (extra space)\n"); + fprintf(stderr, "\t-p <bytes>\n"); + fprintf(stderr, "\t\tAdd padding to the blob of <bytes> long (extra space)\n"); + fprintf(stderr, "\t-b <number>\n"); + fprintf(stderr, "\t\tSet the physical boot cpu\n"); + fprintf(stderr, "\t-f\n"); + fprintf(stderr, "\t\tForce - try to produce output even if the input tree has errors\n"); + fprintf(stderr, "\t-v\n"); + fprintf(stderr, "\t\tPrint DTC version and exit\n"); + exit(2); +} + +int main(int argc, char *argv[]) +{ + struct boot_info *bi; + const char *inform = "dts"; + const char *outform = "dts"; + const char *outname = "-"; + int force = 0, check = 0; + const char *arg; + int opt; + FILE *inf = NULL; + FILE *outf = NULL; + int outversion = DEFAULT_FDT_VERSION; + int boot_cpuid_phys = 0xfeedbeef; + + quiet = 0; + reservenum = 0; + minsize = 0; + padsize = 0; + + while ((opt = getopt(argc, argv, "hI:O:o:V:R:S:p:fcqb:v")) != EOF) { + switch (opt) { + case 'I': + inform = optarg; + break; + case 'O': + outform = optarg; + break; + case 'o': + outname = optarg; + break; + case 'V': + outversion = strtol(optarg, NULL, 0); + break; + case 'R': + reservenum = strtol(optarg, NULL, 0); + break; + case 'S': + minsize = strtol(optarg, NULL, 0); + break; + case 'p': + padsize = strtol(optarg, NULL, 0); + break; + case 'f': + force = 1; + break; + case 'c': + check = 1; + break; + case 'q': + quiet++; + break; + case 'b': + boot_cpuid_phys = strtol(optarg, NULL, 0); + break; + case 'v': + printf("Version: %s\n", DTC_VERSION); + exit(0); + case 'h': + default: + usage(); + } + } + + if (argc > (optind+1)) + usage(); + else if (argc < (optind+1)) + arg = "-"; + else + arg = argv[optind]; + + /* minsize and padsize are mutually exclusive */ + if ((minsize) && (padsize)) { + die("Can't set both -p and -S\n"); + } + + fprintf(stderr, "DTC: %s->%s on file \"%s\"\n", + inform, outform, arg); + + if (streq(inform, "dts")) { + bi = dt_from_source(arg); + } else if (streq(inform, "fs")) { + bi = dt_from_fs(arg); + } else if(streq(inform, "dtb")) { + inf = dtc_open_file(arg); + bi = dt_from_blob(inf); + } else { + die("Unknown input format \"%s\"\n", inform); + } + + if (inf && (inf != stdin)) + fclose(inf); + + if (! bi || ! bi->dt) + die("Couldn't read input tree\n"); + + process_checks(force, bi, check, outversion, boot_cpuid_phys); + + if (streq(outname, "-")) { + outf = stdout; + } else { + outf = fopen(outname, "w"); + if (! outf) + die("Couldn't open output file %s: %s\n", + outname, strerror(errno)); + } + + if (streq(outform, "dts")) { + dt_to_source(outf, bi); + } else if (streq(outform, "dtb")) { + dt_to_blob(outf, bi, outversion, boot_cpuid_phys); + } else if (streq(outform, "asm")) { + dt_to_asm(outf, bi, outversion, boot_cpuid_phys); + } else if (streq(outform, "null")) { + /* do nothing */ + } else { + die("Unknown output format \"%s\"\n", outform); + } + + exit(0); +} diff --git a/arch/powerpc/boot/dtc-src/dtc.h b/arch/powerpc/boot/dtc-src/dtc.h new file mode 100644 index 00000000000..65281777a16 --- /dev/null +++ b/arch/powerpc/boot/dtc-src/dtc.h @@ -0,0 +1,269 @@ +#ifndef _DTC_H +#define _DTC_H + +/* + * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2005. + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + +#include <stdio.h> +#include <string.h> +#include <stdlib.h> +#include <stdint.h> +#include <stdarg.h> +#include <assert.h> +#include <ctype.h> +#include <errno.h> +#include <unistd.h> +#include <netinet/in.h> +#include <endian.h> +#include <byteswap.h> + +#include <fdt.h> + +#define DEFAULT_FDT_VERSION 17 +/* + * Command line options + */ +extern int quiet; /* Level of quietness */ +extern int reservenum; /* Number of memory reservation slots */ +extern int minsize; /* Minimum blob size */ +extern int padsize; /* Additional padding to blob */ + +static inline void __attribute__((noreturn)) die(char * str, ...) +{ + va_list ap; + + va_start(ap, str); + fprintf(stderr, "FATAL ERROR: "); + vfprintf(stderr, str, ap); + exit(1); +} + +static inline void *xmalloc(size_t len) +{ + void *new = malloc(len); + + if (! new) + die("malloc() failed\n"); + + return new; +} + +static inline void *xrealloc(void *p, size_t len) +{ + void *new = realloc(p, len); + + if (! new) + die("realloc() failed (len=%d)\n", len); + + return new; +} + +typedef uint8_t u8; +typedef uint16_t u16; +typedef uint32_t u32; +typedef uint64_t u64; +typedef u32 cell_t; + +#define cpu_to_be16(x) htons(x) +#define be16_to_cpu(x) ntohs(x) + +#define cpu_to_be32(x) htonl(x) +#define be32_to_cpu(x) ntohl(x) + +#if __BYTE_ORDER == __BIG_ENDIAN +#define cpu_to_be64(x) (x) +#define be64_to_cpu(x) (x) +#else +#define cpu_to_be64(x) bswap_64(x) +#define be64_to_cpu(x) bswap_64(x) +#endif + +#define streq(a, b) (strcmp((a), (b)) == 0) +#define strneq(a, b, n) (strncmp((a), (b), (n)) == 0) + +#define ALIGN(x, a) (((x) + (a) - 1) & ~((a) - 1)) +#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) + +/* Data blobs */ +enum markertype { + REF_PHANDLE, + REF_PATH, + LABEL, +}; + +struct marker { + enum markertype type; + int offset; + char *ref; + struct marker *next; +}; + +struct data { + int len; + char *val; + int asize; + struct marker *markers; +}; + + +#define empty_data ((struct data){ /* all .members = 0 or NULL */ }) + +#define for_each_marker(m) \ + for (; (m); (m) = (m)->next) +#define for_each_marker_of_type(m, t) \ + for_each_marker(m) \ + if ((m)->type == (t)) + +void data_free(struct data d); + +struct data data_grow_for(struct data d, int xlen); + +struct data data_copy_mem(const char *mem, int len); +struct data data_copy_escape_string(const char *s, int len); +struct data data_copy_file(FILE *f, size_t len); + +struct data data_append_data(struct data d, const void *p, int len); +struct data data_insert_at_marker(struct data d, struct marker *m, + const void *p, int len); +struct data data_merge(struct data d1, struct data d2); +struct data data_append_cell(struct data d, cell_t word); +struct data data_append_re(struct data d, const struct fdt_reserve_entry *re); +struct data data_append_addr(struct data d, u64 addr); +struct data data_append_byte(struct data d, uint8_t byte); +struct data data_append_zeroes(struct data d, int len); +struct data data_append_align(struct data d, int align); + +struct data data_add_marker(struct data d, enum markertype type, char *ref); + +int data_is_one_string(struct data d); + +/* DT constraints */ + +#define MAX_PROPNAME_LEN 31 +#define MAX_NODENAME_LEN 31 + +/* Live trees */ +struct property { + char *name; + struct data val; + + struct property *next; + + char *label; +}; + +struct node { + char *name; + struct property *proplist; + struct node *children; + + struct node *parent; + struct node *next_sibling; + + char *fullpath; + int basenamelen; + + cell_t phandle; + int addr_cells, size_cells; + + char *label; +}; + +#define for_each_property(n, p) \ + for ((p) = (n)->proplist; (p); (p) = (p)->next) + +#define for_each_child(n, c) \ + for ((c) = (n)->children; (c); (c) = (c)->next_sibling) + +struct property *build_property(char *name, struct data val, char *label); +struct property *chain_property(struct property *first, struct property *list); +struct property *reverse_properties(struct property *first); + +struct node *build_node(struct property *proplist, struct node *children); +struct node *name_node(struct node *node, char *name, char *label); +struct node *chain_node(struct node *first, struct node *list); + +void add_property(struct node *node, struct property *prop); +void add_child(struct node *parent, struct node *child); + +const char *get_unitname(struct node *node); +struct property *get_property(struct node *node, const char *propname); +cell_t propval_cell(struct property *prop); +struct node *get_subnode(struct node *node, const char *nodename); +struct node *get_node_by_path(struct node *tree, const char *path); +struct node *get_node_by_label(struct node *tree, const char *label); +struct node *get_node_by_phandle(struct node *tree, cell_t phandle); +struct node *get_node_by_ref(struct node *tree, const char *ref); +cell_t get_node_phandle(struct node *root, struct node *node); + +/* Boot info (tree plus memreserve information */ + +struct reserve_info { + struct fdt_reserve_entry re; + + struct reserve_info *next; + + char *label; +}; + +struct reserve_info *build_reserve_entry(u64 start, u64 len, char *label); +struct reserve_info *chain_reserve_entry(struct reserve_info *first, + struct reserve_info *list); +struct reserve_info *add_reserve_entry(struct reserve_info *list, + struct reserve_info *new); + + +struct boot_info { + struct reserve_info *reservelist; + struct node *dt; /* the device tree */ +}; + +struct boot_info *build_boot_info(struct reserve_info *reservelist, + struct node *tree); + +/* Checks */ + +void process_checks(int force, struct boot_info *bi, + int checkflag, int outversion, int boot_cpuid_phys); + +/* Flattened trees */ + +void dt_to_blob(FILE *f, struct boot_info *bi, int version, + int boot_cpuid_phys); +void dt_to_asm(FILE *f, struct boot_info *bi, int version, + int boot_cpuid_phys); + +struct boot_info *dt_from_blob(FILE *f); + +/* Tree source */ + +void dt_to_source(FILE *f, struct boot_info *bi); +struct boot_info *dt_from_source(const char *f); + +/* FS trees */ + +struct boot_info *dt_from_fs(const char *dirname); + +/* misc */ + +char *join_path(const char *path, const char *name); +void fill_fullpaths(struct node *tree, const char *prefix); + +#endif /* _DTC_H */ diff --git a/arch/powerpc/boot/dtc-src/flattree.c b/arch/powerpc/boot/dtc-src/flattree.c new file mode 100644 index 00000000000..a7cfb843d33 --- /dev/null +++ b/arch/powerpc/boot/dtc-src/flattree.c @@ -0,0 +1,968 @@ +/* + * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2005. + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + +#include "dtc.h" + +#define FTF_FULLPATH 0x1 +#define FTF_VARALIGN 0x2 +#define FTF_NAMEPROPS 0x4 +#define FTF_BOOTCPUID 0x8 +#define FTF_STRTABSIZE 0x10 +#define FTF_STRUCTSIZE 0x20 +#define FTF_NOPS 0x40 + +static struct version_info { + int version; + int last_comp_version; + int hdr_size; + int flags; +} version_table[] = { + {1, 1, FDT_V1_SIZE, + FTF_FULLPATH|FTF_VARALIGN|FTF_NAMEPROPS}, + {2, 1, FDT_V2_SIZE, + FTF_FULLPATH|FTF_VARALIGN|FTF_NAMEPROPS|FTF_BOOTCPUID}, + {3, 1, FDT_V3_SIZE, + FTF_FULLPATH|FTF_VARALIGN|FTF_NAMEPROPS|FTF_BOOTCPUID|FTF_STRTABSIZE}, + {16, 16, FDT_V3_SIZE, + FTF_BOOTCPUID|FTF_STRTABSIZE|FTF_NOPS}, + {17, 16, FDT_V17_SIZE, + FTF_BOOTCPUID|FTF_STRTABSIZE|FTF_STRUCTSIZE|FTF_NOPS}, +}; + +struct emitter { + void (*cell)(void *, cell_t); + void (*string)(void *, char *, int); + void (*align)(void *, int); + void (*data)(void *, struct data); + void (*beginnode)(void *, const char *); + void (*endnode)(void *, const char *); + void (*property)(void *, const char *); +}; + +static void bin_emit_cell(void *e, cell_t val) +{ + struct data *dtbuf = e; + + *dtbuf = data_append_cell(*dtbuf, val); +} + +static void bin_emit_string(void *e, char *str, int len) +{ + struct data *dtbuf = e; + + if (len == 0) + len = strlen(str); + + *dtbuf = data_append_data(*dtbuf, str, len); + *dtbuf = data_append_byte(*dtbuf, '\0'); +} + +static void bin_emit_align(void *e, int a) +{ + struct data *dtbuf = e; + + *dtbuf = data_append_align(*dtbuf, a); +} + +static void bin_emit_data(void *e, struct data d) +{ + struct data *dtbuf = e; + + *dtbuf = data_append_data(*dtbuf, d.val, d.len); +} + +static void bin_emit_beginnode(void *e, const char *label) +{ + bin_emit_cell(e, FDT_BEGIN_NODE); +} + +static void bin_emit_endnode(void *e, const char *label) +{ + bin_emit_cell(e, FDT_END_NODE); +} + +static void bin_emit_property(void *e, const char *label) +{ + bin_emit_cell(e, FDT_PROP); +} + +static struct emitter bin_emitter = { + .cell = bin_emit_cell, + .string = bin_emit_string, + .align = bin_emit_align, + .data = bin_emit_data, + .beginnode = bin_emit_beginnode, + .endnode = bin_emit_endnode, + .property = bin_emit_property, +}; + +static void emit_label(FILE *f, const char *prefix, const char *label) +{ + fprintf(f, "\t.globl\t%s_%s\n", prefix, label); + fprintf(f, "%s_%s:\n", prefix, label); + fprintf(f, "_%s_%s:\n", prefix, label); +} + +static void emit_offset_label(FILE *f, const char *label, int offset) +{ + fprintf(f, "\t.globl\t%s\n", label); + fprintf(f, "%s\t= . + %d\n", label, offset); +} + +static void asm_emit_cell(void *e, cell_t val) +{ + FILE *f = e; + + fprintf(f, "\t.long\t0x%x\n", val); +} + +static void asm_emit_string(void *e, char *str, int len) +{ + FILE *f = e; + char c = 0; + + if (len != 0) { + /* XXX: ewww */ + c = str[len]; + str[len] = '\0'; + } + + fprintf(f, "\t.string\t\"%s\"\n", str); + + if (len != 0) { + str[len] = c; + } +} + +static void asm_emit_align(void *e, int a) +{ + FILE *f = e; + + fprintf(f, "\t.balign\t%d\n", a); +} + +static void asm_emit_data(void *e, struct data d) +{ + FILE *f = e; + int off = 0; + struct marker *m; + + m = d.markers; + while (m) { + if (m->type == LABEL) + emit_offset_label(f, m->ref, m->offset); + m = m->next; + } + + while ((d.len - off) >= sizeof(u32)) { + fprintf(f, "\t.long\t0x%x\n", + be32_to_cpu(*((u32 *)(d.val+off)))); + off += sizeof(u32); + } + + if ((d.len - off) >= sizeof(u16)) { + fprintf(f, "\t.short\t0x%hx\n", + be16_to_cpu(*((u16 *)(d.val+off)))); + off += sizeof(u16); + } + + if ((d.len - off) >= 1) { + fprintf(f, "\t.byte\t0x%hhx\n", d.val[off]); + off += 1; + } + + assert(off == d.len); +} + +static void asm_emit_beginnode(void *e, const char *label) +{ + FILE *f = e; + + if (label) { + fprintf(f, "\t.globl\t%s\n", label); + fprintf(f, "%s:\n", label); + } + fprintf(f, "\t.long\tFDT_BEGIN_NODE\n"); +} + +static void asm_emit_endnode(void *e, const char *label) +{ + FILE *f = e; + + fprintf(f, "\t.long\tFDT_END_NODE\n"); + if (label) { + fprintf(f, "\t.globl\t%s_end\n", label); + fprintf(f, "%s_end:\n", label); + } +} + +static void asm_emit_property(void *e, const char *label) +{ + FILE *f = e; + + if (label) { + fprintf(f, "\t.globl\t%s\n", label); + fprintf(f, "%s:\n", label); + } + fprintf(f, "\t.long\tFDT_PROP\n"); +} + +static struct emitter asm_emitter = { + .cell = asm_emit_cell, + .string = asm_emit_string, + .align = asm_emit_align, + .data = asm_emit_data, + .beginnode = asm_emit_beginnode, + .endnode = asm_emit_endnode, + .property = asm_emit_property, +}; + +static int stringtable_insert(struct data *d, const char *str) +{ + int i; + + /* FIXME: do this more efficiently? */ + + for (i = 0; i < d->len; i++) { + if (streq(str, d->val + i)) + return i; + } + + *d = data_append_data(*d, str, strlen(str)+1); + return i; +} + +static void flatten_tree(struct node *tree, struct emitter *emit, + void *etarget, struct data *strbuf, + struct version_info *vi) +{ + struct property *prop; + struct node *child; + int seen_name_prop = 0; + + emit->beginnode(etarget, tree->label); + + if (vi->flags & FTF_FULLPATH) + emit->string(etarget, tree->fullpath, 0); + else + emit->string(etarget, tree->name, 0); + + emit->align(etarget, sizeof(cell_t)); + + for_each_property(tree, prop) { + int nameoff; + + if (streq(prop->name, "name")) + seen_name_prop = 1; + + nameoff = stringtable_insert(strbuf, prop->name); + + emit->property(etarget, prop->label); + emit->cell(etarget, prop->val.len); + emit->cell(etarget, nameoff); + + if ((vi->flags & FTF_VARALIGN) && (prop->val.len >= 8)) + emit->align(etarget, 8); + + emit->data(etarget, prop->val); + emit->align(etarget, sizeof(cell_t)); + } + + if ((vi->flags & FTF_NAMEPROPS) && !seen_name_prop) { + emit->property(etarget, NULL); + emit->cell(etarget, tree->basenamelen+1); + emit->cell(etarget, stringtable_insert(strbuf, "name")); + + if ((vi->flags & FTF_VARALIGN) && ((tree->basenamelen+1) >= 8)) + emit->align(etarget, 8); + + emit->string(etarget, tree->name, tree->basenamelen); + emit->align(etarget, sizeof(cell_t)); + } + + for_each_child(tree, child) { + flatten_tree(child, emit, etarget, strbuf, vi); + } + + emit->endnode(etarget, tree->label); +} + +static struct data flatten_reserve_list(struct reserve_info *reservelist, + struct version_info *vi) +{ + struct reserve_info *re; + struct data d = empty_data; + static struct fdt_reserve_entry null_re = {0,0}; + int j; + + for (re = reservelist; re; re = re->next) { + d = data_append_re(d, &re->re); + } + /* + * Add additional reserved slots if the user asked for them. + */ + for (j = 0; j < reservenum; j++) { + d = data_append_re(d, &null_re); + } + + return d; +} + +static void make_fdt_header(struct fdt_header *fdt, + struct version_info *vi, + int reservesize, int dtsize, int strsize, + int boot_cpuid_phys) +{ + int reserve_off; + + reservesize += sizeof(struct fdt_reserve_entry); + + memset(fdt, 0xff, sizeof(*fdt)); + + fdt->magic = cpu_to_be32(FDT_MAGIC); + fdt->version = cpu_to_be32(vi->version); + fdt->last_comp_version = cpu_to_be32(vi->last_comp_version); + + /* Reserve map should be doubleword aligned */ + reserve_off = ALIGN(vi->hdr_size, 8); + + fdt->off_mem_rsvmap = cpu_to_be32(reserve_off); + fdt->off_dt_struct = cpu_to_be32(reserve_off + reservesize); + fdt->off_dt_strings = cpu_to_be32(reserve_off + reservesize + + dtsize); + fdt->totalsize = cpu_to_be32(reserve_off + reservesize + dtsize + strsize); + + if (vi->flags & FTF_BOOTCPUID) + fdt->boot_cpuid_phys = cpu_to_be32(boot_cpuid_phys); + if (vi->flags & FTF_STRTABSIZE) + fdt->size_dt_strings = cpu_to_be32(strsize); + if (vi->flags & FTF_STRUCTSIZE) + fdt->size_dt_struct = cpu_to_be32(dtsize); +} + +void dt_to_blob(FILE *f, struct boot_info *bi, int version, + int boot_cpuid_phys) +{ + struct version_info *vi = NULL; + int i; + struct data blob = empty_data; + struct data reservebuf = empty_data; + struct data dtbuf = empty_data; + struct data strbuf = empty_data; + struct fdt_header fdt; + int padlen = 0; + + for (i = 0; i < ARRAY_SIZE(version_table); i++) { + if (version_table[i].version == version) + vi = &version_table[i]; + } + if (!vi) + die("Unknown device tree blob version %d\n", version); + + flatten_tree(bi->dt, &bin_emitter, &dtbuf, &strbuf, vi); + bin_emit_cell(&dtbuf, FDT_END); + + reservebuf = flatten_reserve_list(bi->reservelist, vi); + + /* Make header */ + make_fdt_header(&fdt, vi, reservebuf.len, dtbuf.len, strbuf.len, + boot_cpuid_phys); + + /* + * If the user asked for more space than is used, adjust the totalsize. + */ + if (minsize > 0) { + padlen = minsize - be32_to_cpu(fdt.totalsize); + if ((padlen < 0) && (quiet < 1)) + fprintf(stderr, + "Warning: blob size %d >= minimum size %d\n", + be32_to_cpu(fdt.totalsize), minsize); + } + + if (padsize > 0) + padlen = padsize; + + if (padlen > 0) { + int tsize = be32_to_cpu(fdt.totalsize); + tsize += padlen; + fdt.totalsize = cpu_to_be32(tsize); + } + + /* + * Assemble the blob: start with the header, add with alignment + * the reserve buffer, add the reserve map terminating zeroes, + * the device tree itself, and finally the strings. + */ + blob = data_append_data(blob, &fdt, sizeof(fdt)); + blob = data_append_align(blob, 8); + blob = data_merge(blob, reservebuf); + blob = data_append_zeroes(blob, sizeof(struct fdt_reserve_entry)); + blob = data_merge(blob, dtbuf); + blob = data_merge(blob, strbuf); + + /* + * If the user asked for more space than is used, pad out the blob. + */ + if (padlen > 0) + blob = data_append_zeroes(blob, padlen); + + fwrite(blob.val, blob.len, 1, f); + + if (ferror(f)) + die("Error writing device tree blob: %s\n", strerror(errno)); + + /* + * data_merge() frees the right-hand element so only the blob + * remains to be freed. + */ + data_free(blob); +} + +static void dump_stringtable_asm(FILE *f, struct data strbuf) +{ + const char *p; + int len; + + p = strbuf.val; + + while (p < (strbuf.val + strbuf.len)) { + len = strlen(p); + fprintf(f, "\t.string \"%s\"\n", p); + p += len+1; + } +} + +void dt_to_asm(FILE *f, struct boot_info *bi, int version, int boot_cpuid_phys) +{ + struct version_info *vi = NULL; + int i; + struct data strbuf = empty_data; + struct reserve_info *re; + const char *symprefix = "dt"; + + for (i = 0; i < ARRAY_SIZE(version_table); i++) { + if (version_table[i].version == version) + vi = &version_table[i]; + } + if (!vi) + die("Unknown device tree blob version %d\n", version); + + fprintf(f, "/* autogenerated by dtc, do not edit */\n\n"); + fprintf(f, "#define FDT_MAGIC 0x%x\n", FDT_MAGIC); + fprintf(f, "#define FDT_BEGIN_NODE 0x%x\n", FDT_BEGIN_NODE); + fprintf(f, "#define FDT_END_NODE 0x%x\n", FDT_END_NODE); + fprintf(f, "#define FDT_PROP 0x%x\n", FDT_PROP); + fprintf(f, "#define FDT_END 0x%x\n", FDT_END); + fprintf(f, "\n"); + + emit_label(f, symprefix, "blob_start"); + emit_label(f, symprefix, "header"); + fprintf(f, "\t.long\tFDT_MAGIC\t\t\t\t/* magic */\n"); + fprintf(f, "\t.long\t_%s_blob_abs_end - _%s_blob_start\t/* totalsize */\n", + symprefix, symprefix); + fprintf(f, "\t.long\t_%s_struct_start - _%s_blob_start\t/* off_dt_struct */\n", + symprefix, symprefix); + fprintf(f, "\t.long\t_%s_strings_start - _%s_blob_start\t/* off_dt_strings */\n", + symprefix, symprefix); + fprintf(f, "\t.long\t_%s_reserve_map - _%s_blob_start\t/* off_dt_strings */\n", + symprefix, symprefix); + fprintf(f, "\t.long\t%d\t\t\t\t\t/* version */\n", vi->version); + fprintf(f, "\t.long\t%d\t\t\t\t\t/* last_comp_version */\n", + vi->last_comp_version); + + if (vi->flags & FTF_BOOTCPUID) + fprintf(f, "\t.long\t%i\t\t\t\t\t/* boot_cpuid_phys */\n", + boot_cpuid_phys); + + if (vi->flags & FTF_STRTABSIZE) + fprintf(f, "\t.long\t_%s_strings_end - _%s_strings_start\t/* size_dt_strings */\n", + symprefix, symprefix); + + if (vi->flags & FTF_STRUCTSIZE) + fprintf(f, "\t.long\t_%s_struct_end - _%s_struct_start\t/* size_dt_struct */\n", + symprefix, symprefix); + + /* + * Reserve map entries. + * Align the reserve map to a doubleword boundary. + * Each entry is an (address, size) pair of u64 values. + * Always supply a zero-sized temination entry. + */ + asm_emit_align(f, 8); + emit_label(f, symprefix, "reserve_map"); + + fprintf(f, "/* Memory reserve map from source file */\n"); + + /* + * Use .long on high and low halfs of u64s to avoid .quad + * as it appears .quad isn't available in some assemblers. + */ + for (re = bi->reservelist; re; re = re->next) { + if (re->label) { + fprintf(f, "\t.globl\t%s\n", re->label); + fprintf(f, "%s:\n", re->label); + } + fprintf(f, "\t.long\t0x%08x, 0x%08x\n", + (unsigned int)(re->re.address >> 32), + (unsigned int)(re->re.address & 0xffffffff)); + fprintf(f, "\t.long\t0x%08x, 0x%08x\n", + (unsigned int)(re->re.size >> 32), + (unsigned int)(re->re.size & 0xffffffff)); + } + for (i = 0; i < reservenum; i++) { + fprintf(f, "\t.long\t0, 0\n\t.long\t0, 0\n"); + } + + fprintf(f, "\t.long\t0, 0\n\t.long\t0, 0\n"); + + emit_label(f, symprefix, "struct_start"); + flatten_tree(bi->dt, &asm_emitter, f, &strbuf, vi); + fprintf(f, "\t.long\tFDT_END\n"); + emit_label(f, symprefix, "struct_end"); + + emit_label(f, symprefix, "strings_start"); + dump_stringtable_asm(f, strbuf); + emit_label(f, symprefix, "strings_end"); + + emit_label(f, symprefix, "blob_end"); + + /* + * If the user asked for more space than is used, pad it out. + */ + if (minsize > 0) { + fprintf(f, "\t.space\t%d - (_%s_blob_end - _%s_blob_start), 0\n", + minsize, symprefix, symprefix); + } + if (padsize > 0) { + fprintf(f, "\t.space\t%d, 0\n", padsize); + } + emit_label(f, symprefix, "blob_abs_end"); + + data_free(strbuf); +} + +struct inbuf { + char *base, *limit, *ptr; +}; + +static void inbuf_init(struct inbuf *inb, void *base, void *limit) +{ + inb->base = base; + inb->limit = limit; + inb->ptr = inb->base; +} + +static void flat_read_chunk(struct inbuf *inb, void *p, int len) +{ + if ((inb->ptr + len) > inb->limit) + die("Premature end of data parsing flat device tree\n"); + + memcpy(p, inb->ptr, len); + + inb->ptr += len; +} + +static u32 flat_read_word(struct inbuf *inb) +{ + u32 val; + + assert(((inb->ptr - inb->base) % sizeof(val)) == 0); + + flat_read_chunk(inb, &val, sizeof(val)); + + return be32_to_cpu(val); +} + +static void flat_realign(struct inbuf *inb, int align) +{ + int off = inb->ptr - inb->base; + + inb->ptr = inb->base + ALIGN(off, align); + if (inb->ptr > inb->limit) + die("Premature end of data parsing flat device tree\n"); +} + +static char *flat_read_string(struct inbuf *inb) +{ + int len = 0; + const char *p = inb->ptr; + char *str; + + do { + if (p >= inb->limit) + die("Premature end of data parsing flat device tree\n"); + len++; + } while ((*p++) != '\0'); + + str = strdup(inb->ptr); + + inb->ptr += len; + + flat_realign(inb, sizeof(u32)); + + return str; +} + +static struct data flat_read_data(struct inbuf *inb, int len) +{ + struct data d = empty_data; + + if (len == 0) + return empty_data; + + d = data_grow_for(d, len); + d.len = len; + + flat_read_chunk(inb, d.val, len); + + flat_realign(inb, sizeof(u32)); + + return d; +} + +static char *flat_read_stringtable(struct inbuf *inb, int offset) +{ + const char *p; + + p = inb->base + offset; + while (1) { + if (p >= inb->limit || p < inb->base) + die("String offset %d overruns string table\n", + offset); + + if (*p == '\0') + break; + + p++; + } + + return strdup(inb->base + offset); +} + +static struct property *flat_read_property(struct inbuf *dtbuf, + struct inbuf *strbuf, int flags) +{ + u32 proplen, stroff; + char *name; + struct data val; + + proplen = flat_read_word(dtbuf); + stroff = flat_read_word(dtbuf); + + name = flat_read_stringtable(strbuf, stroff); + + if ((flags & FTF_VARALIGN) && (proplen >= 8)) + flat_realign(dtbuf, 8); + + val = flat_read_data(dtbuf, proplen); + + return build_property(name, val, NULL); +} + + +static struct reserve_info *flat_read_mem_reserve(struct inbuf *inb) +{ + struct reserve_info *reservelist = NULL; + struct reserve_info *new; + const char *p; + struct fdt_reserve_entry re; + + /* + * Each entry is a pair of u64 (addr, size) values for 4 cell_t's. + * List terminates at an entry with size equal to zero. + * + * First pass, count entries. + */ + p = inb->ptr; + while (1) { + flat_read_chunk(inb, &re, sizeof(re)); + re.address = be64_to_cpu(re.address); + re.size = be64_to_cpu(re.size); + if (re.size == 0) + break; + + new = build_reserve_entry(re.address, re.size, NULL); + reservelist = add_reserve_entry(reservelist, new); + } + + return reservelist; +} + + +static char *nodename_from_path(const char *ppath, const char *cpath) +{ + const char *lslash; + int plen; + + lslash = strrchr(cpath, '/'); + if (! lslash) + return NULL; + + plen = lslash - cpath; + + if (streq(cpath, "/") && streq(ppath, "")) + return ""; + + if ((plen == 0) && streq(ppath, "/")) + return strdup(lslash+1); + + if (! strneq(ppath, cpath, plen)) + return NULL; + + return strdup(lslash+1); +} + +static const char PROPCHAR[] = "abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789,._+*#?-"; +static const char UNITCHAR[] = "0123456789abcdef,"; + +static int check_node_name(const char *name) +{ + const char *atpos; + int basenamelen; + + atpos = strrchr(name, '@'); + + if (atpos) + basenamelen = atpos - name; + else + basenamelen = strlen(name); + + if (strspn(name, PROPCHAR) < basenamelen) + return -1; + + if (atpos + && ((basenamelen + 1 + strspn(atpos+1, UNITCHAR)) < strlen(name))) + return -1; + + return basenamelen; +} + +static struct node *unflatten_tree(struct inbuf *dtbuf, + struct inbuf *strbuf, + const char *parent_path, int flags) +{ + struct node *node; + u32 val; + + node = build_node(NULL, NULL); + + if (flags & FTF_FULLPATH) { + node->fullpath = flat_read_string(dtbuf); + node->name = nodename_from_path(parent_path, node->fullpath); + + if (! node->name) + die("Path \"%s\" is not valid as a child of \"%s\"\n", + node->fullpath, parent_path); + } else { + node->name = flat_read_string(dtbuf); + node->fullpath = join_path(parent_path, node->name); + } + + node->basenamelen = check_node_name(node->name); + if (node->basenamelen < 0) { + fprintf(stderr, "Warning \"%s\" has incorrect format\n", node->name); + } + + do { + struct property *prop; + struct node *child; + + val = flat_read_word(dtbuf); + switch (val) { + case FDT_PROP: + if (node->children) + fprintf(stderr, "Warning: Flat tree input has " + "subnodes preceding a property.\n"); + prop = flat_read_property(dtbuf, strbuf, flags); + add_property(node, prop); + break; + + case FDT_BEGIN_NODE: + child = unflatten_tree(dtbuf,strbuf, node->fullpath, + flags); + add_child(node, child); + break; + + case FDT_END_NODE: + break; + + case FDT_END: + die("Premature FDT_END in device tree blob\n"); + break; + + case FDT_NOP: + if (!(flags & FTF_NOPS)) + fprintf(stderr, "Warning: NOP tag found in flat tree" + " version <16\n"); + + /* Ignore */ + break; + + default: + die("Invalid opcode word %08x in device tree blob\n", + val); + } + } while (val != FDT_END_NODE); + + return node; +} + + +struct boot_info *dt_from_blob(FILE *f) +{ + u32 magic, totalsize, version, size_str, size_dt; + u32 off_dt, off_str, off_mem_rsvmap; + int rc; + char *blob; + struct fdt_header *fdt; + char *p; + struct inbuf dtbuf, strbuf; + struct inbuf memresvbuf; + int sizeleft; + struct reserve_info *reservelist; + struct node *tree; + u32 val; + int flags = 0; + + rc = fread(&magic, sizeof(magic), 1, f); + if (ferror(f)) + die("Error reading DT blob magic number: %s\n", + strerror(errno)); + if (rc < 1) { + if (feof(f)) + die("EOF reading DT blob magic number\n"); + else + die("Mysterious short read reading magic number\n"); + } + + magic = be32_to_cpu(magic); + if (magic != FDT_MAGIC) + die("Blob has incorrect magic number\n"); + + rc = fread(&totalsize, sizeof(totalsize), 1, f); + if (ferror(f)) + die("Error reading DT blob size: %s\n", strerror(errno)); + if (rc < 1) { + if (feof(f)) + die("EOF reading DT blob size\n"); + else + die("Mysterious short read reading blob size\n"); + } + + totalsize = be32_to_cpu(totalsize); + if (totalsize < FDT_V1_SIZE) + die("DT blob size (%d) is too small\n", totalsize); + + blob = xmalloc(totalsize); + + fdt = (struct fdt_header *)blob; + fdt->magic = cpu_to_be32(magic); + fdt->totalsize = cpu_to_be32(totalsize); + + sizeleft = totalsize - sizeof(magic) - sizeof(totalsize); + p = blob + sizeof(magic) + sizeof(totalsize); + + while (sizeleft) { + if (feof(f)) + die("EOF before reading %d bytes of DT blob\n", + totalsize); + + rc = fread(p, 1, sizeleft, f); + if (ferror(f)) + die("Error reading DT blob: %s\n", + strerror(errno)); + + sizeleft -= rc; + p += rc; + } + + off_dt = be32_to_cpu(fdt->off_dt_struct); + off_str = be32_to_cpu(fdt->off_dt_strings); + off_mem_rsvmap = be32_to_cpu(fdt->off_mem_rsvmap); + version = be32_to_cpu(fdt->version); + + fprintf(stderr, "\tmagic:\t\t\t0x%x\n", magic); + fprintf(stderr, "\ttotalsize:\t\t%d\n", totalsize); + fprintf(stderr, "\toff_dt_struct:\t\t0x%x\n", off_dt); + fprintf(stderr, "\toff_dt_strings:\t\t0x%x\n", off_str); + fprintf(stderr, "\toff_mem_rsvmap:\t\t0x%x\n", off_mem_rsvmap); + fprintf(stderr, "\tversion:\t\t0x%x\n", version ); + fprintf(stderr, "\tlast_comp_version:\t0x%x\n", + be32_to_cpu(fdt->last_comp_version)); + + if (off_mem_rsvmap >= totalsize) + die("Mem Reserve structure offset exceeds total size\n"); + + if (off_dt >= totalsize) + die("DT structure offset exceeds total size\n"); + + if (off_str > totalsize) + die("String table offset exceeds total size\n"); + + if (version >= 2) + fprintf(stderr, "\tboot_cpuid_phys:\t0x%x\n", + be32_to_cpu(fdt->boot_cpuid_phys)); + + size_str = -1; + if (version >= 3) { + size_str = be32_to_cpu(fdt->size_dt_strings); + fprintf(stderr, "\tsize_dt_strings:\t%d\n", size_str); + if (off_str+size_str > totalsize) + die("String table extends past total size\n"); + } + + if (version >= 17) { + size_dt = be32_to_cpu(fdt->size_dt_struct); + fprintf(stderr, "\tsize_dt_struct:\t\t%d\n", size_dt); + if (off_dt+size_dt > totalsize) + die("Structure block extends past total size\n"); + } + + if (version < 16) { + flags |= FTF_FULLPATH | FTF_NAMEPROPS | FTF_VARALIGN; + } else { + flags |= FTF_NOPS; + } + + inbuf_init(&memresvbuf, + blob + off_mem_rsvmap, blob + totalsize); + inbuf_init(&dtbuf, blob + off_dt, blob + totalsize); + if (size_str >= 0) + inbuf_init(&strbuf, blob + off_str, blob + off_str + size_str); + else + inbuf_init(&strbuf, blob + off_str, blob + totalsize); + + reservelist = flat_read_mem_reserve(&memresvbuf); + + val = flat_read_word(&dtbuf); + + if (val != FDT_BEGIN_NODE) + die("Device tree blob doesn't begin with FDT_BEGIN_NODE (begins with 0x%08x)\n", val); + + tree = unflatten_tree(&dtbuf, &strbuf, "", flags); + + val = flat_read_word(&dtbuf); + if (val != FDT_END) + die("Device tree blob doesn't end with FDT_END\n"); + + free(blob); + + return build_boot_info(reservelist, tree); +} diff --git a/arch/powerpc/boot/dtc-src/fstree.c b/arch/powerpc/boot/dtc-src/fstree.c new file mode 100644 index 00000000000..2a160a46998 --- /dev/null +++ b/arch/powerpc/boot/dtc-src/fstree.c @@ -0,0 +1,94 @@ +/* + * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2005. + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + +#include "dtc.h" + +#include <dirent.h> +#include <sys/stat.h> + +static struct node *read_fstree(const char *dirname) +{ + DIR *d; + struct dirent *de; + struct stat st; + struct node *tree; + + d = opendir(dirname); + if (! d) + die("opendir(): %s\n", strerror(errno)); + + tree = build_node(NULL, NULL); + + while ((de = readdir(d)) != NULL) { + char *tmpnam; + + if (streq(de->d_name, ".") + || streq(de->d_name, "..")) + continue; + + tmpnam = join_path(dirname, de->d_name); + + if (lstat(tmpnam, &st) < 0) + die("stat(%s): %s\n", tmpnam, strerror(errno)); + + if (S_ISREG(st.st_mode)) { + struct property *prop; + FILE *pfile; + + pfile = fopen(tmpnam, "r"); + if (! pfile) { + fprintf(stderr, + "WARNING: Cannot open %s: %s\n", + tmpnam, strerror(errno)); + } else { + prop = build_property(strdup(de->d_name), + data_copy_file(pfile, + st.st_size), + NULL); + add_property(tree, prop); + fclose(pfile); + } + } else if (S_ISDIR(st.st_mode)) { + struct node *newchild; + + newchild = read_fstree(tmpnam); + newchild = name_node(newchild, strdup(de->d_name), + NULL); + add_child(tree, newchild); + } + + free(tmpnam); + } + + return tree; +} + +struct boot_info *dt_from_fs(const char *dirname) +{ + struct node *tree; + + tree = read_fstree(dirname); + tree = name_node(tree, "", NULL); + + fill_fullpaths(tree, ""); + + return build_boot_info(NULL, tree); +} + diff --git a/arch/powerpc/boot/dtc-src/livetree.c b/arch/powerpc/boot/dtc-src/livetree.c new file mode 100644 index 00000000000..6ba0846b431 --- /dev/null +++ b/arch/powerpc/boot/dtc-src/livetree.c @@ -0,0 +1,305 @@ +/* + * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2005. + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + +#include "dtc.h" + +/* + * Tree building functions + */ + +struct property *build_property(char *name, struct data val, char *label) +{ + struct property *new = xmalloc(sizeof(*new)); + + new->name = name; + new->val = val; + + new->next = NULL; + + new->label = label; + + return new; +} + +struct property *chain_property(struct property *first, struct property *list) +{ + assert(first->next == NULL); + + first->next = list; + return first; +} + +struct property *reverse_properties(struct property *first) +{ + struct property *p = first; + struct property *head = NULL; + struct property *next; + + while (p) { + next = p->next; + p->next = head; + head = p; + p = next; + } + return head; +} + +struct node *build_node(struct property *proplist, struct node *children) +{ + struct node *new = xmalloc(sizeof(*new)); + struct node *child; + + memset(new, 0, sizeof(*new)); + + new->proplist = reverse_properties(proplist); + new->children = children; + + for_each_child(new, child) { + child->parent = new; + } + + return new; +} + +struct node *name_node(struct node *node, char *name, char * label) +{ + assert(node->name == NULL); + + node->name = name; + + node->label = label; + + return node; +} + +struct node *chain_node(struct node *first, struct node *list) +{ + assert(first->next_sibling == NULL); + + first->next_sibling = list; + return first; +} + +void add_property(struct node *node, struct property *prop) +{ + struct property **p; + + prop->next = NULL; + + p = &node->proplist; + while (*p) + p = &((*p)->next); + + *p = prop; +} + +void add_child(struct node *parent, struct node *child) +{ + struct node **p; + + child->next_sibling = NULL; + + p = &parent->children; + while (*p) + p = &((*p)->next_sibling); + + *p = child; +} + +struct reserve_info *build_reserve_entry(u64 address, u64 size, char *label) +{ + struct reserve_info *new = xmalloc(sizeof(*new)); + + new->re.address = address; + new->re.size = size; + + new->next = NULL; + + new->label = label; + + return new; +} + +struct reserve_info *chain_reserve_entry(struct reserve_info *first, + struct reserve_info *list) +{ + assert(first->next == NULL); + + first->next = list; + return first; +} + +struct reserve_info *add_reserve_entry(struct reserve_info *list, + struct reserve_info *new) +{ + struct reserve_info *last; + + new->next = NULL; + + if (! list) + return new; + + for (last = list; last->next; last = last->next) + ; + + last->next = new; + + return list; +} + +struct boot_info *build_boot_info(struct reserve_info *reservelist, + struct node *tree) +{ + struct boot_info *bi; + + bi = xmalloc(sizeof(*bi)); + bi->reservelist = reservelist; + bi->dt = tree; + + return bi; +} + +/* + * Tree accessor functions + */ + +const char *get_unitname(struct node *node) +{ + if (node->name[node->basenamelen] == '\0') + return ""; + else + return node->name + node->basenamelen + 1; +} + +struct property *get_property(struct node *node, const char *propname) +{ + struct property *prop; + + for_each_property(node, prop) + if (streq(prop->name, propname)) + return prop; + + return NULL; +} + +cell_t propval_cell(struct property *prop) +{ + assert(prop->val.len == sizeof(cell_t)); + return be32_to_cpu(*((cell_t *)prop->val.val)); +} + +struct node *get_subnode(struct node *node, const char *nodename) +{ + struct node *child; + + for_each_child(node, child) + if (streq(child->name, nodename)) + return child; + + return NULL; +} + +struct node *get_node_by_path(struct node *tree, const char *path) +{ + const char *p; + struct node *child; + + if (!path || ! (*path)) + return tree; + + while (path[0] == '/') + path++; + + p = strchr(path, '/'); + + for_each_child(tree, child) { + if (p && strneq(path, child->name, p-path)) + return get_node_by_path(child, p+1); + else if (!p && streq(path, child->name)) + return child; + } + + return NULL; +} + +struct node *get_node_by_label(struct node *tree, const char *label) +{ + struct node *child, *node; + + assert(label && (strlen(label) > 0)); + + if (tree->label && streq(tree->label, label)) + return tree; + + for_each_child(tree, child) { + node = get_node_by_label(child, label); + if (node) + return node; + } + + return NULL; +} + +struct node *get_node_by_phandle(struct node *tree, cell_t phandle) +{ + struct node *child, *node; + + assert((phandle != 0) && (phandle != -1)); + + if (tree->phandle == phandle) + return tree; + + for_each_child(tree, child) { + node = get_node_by_phandle(child, phandle); + if (node) + return node; + } + + return NULL; +} + +struct node *get_node_by_ref(struct node *tree, const char *ref) +{ + if (ref[0] == '/') + return get_node_by_path(tree, ref); + else + return get_node_by_label(tree, ref); +} + +cell_t get_node_phandle(struct node *root, struct node *node) +{ + static cell_t phandle = 1; /* FIXME: ick, static local */ + + if ((node->phandle != 0) && (node->phandle != -1)) + return node->phandle; + + assert(! get_property(node, "linux,phandle")); + + while (get_node_by_phandle(root, phandle)) + phandle++; + + node->phandle = phandle; + add_property(node, + build_property("linux,phandle", + data_append_cell(empty_data, phandle), + NULL)); + + return node->phandle; +} diff --git a/arch/powerpc/boot/dtc-src/srcpos.c b/arch/powerpc/boot/dtc-src/srcpos.c new file mode 100644 index 00000000000..352b0fe06fd --- /dev/null +++ b/arch/powerpc/boot/dtc-src/srcpos.c @@ -0,0 +1,105 @@ +/* + * Copyright 2007 Jon Loeliger, Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + +#include "dtc.h" +#include "srcpos.h" + + +/* + * Record the complete unique set of opened file names. + * Primarily used to cache source position file names. + */ +#define MAX_N_FILE_NAMES (100) + +const char *file_names[MAX_N_FILE_NAMES]; +static int n_file_names = 0; + +/* + * Like yylineno, this is the current open file pos. + */ + +int srcpos_filenum = -1; + + + +FILE *dtc_open_file(const char *fname) +{ + FILE *f; + + if (lookup_file_name(fname, 1) < 0) + die("Too many files opened\n"); + + if (streq(fname, "-")) + f = stdin; + else + f = fopen(fname, "r"); + + if (! f) + die("Couldn't open \"%s\": %s\n", fname, strerror(errno)); + + return f; +} + + + +/* + * Locate and optionally add filename fname in the file_names[] array. + * + * If the filename is currently not in the array and the boolean + * add_it is non-zero, an attempt to add the filename will be made. + * + * Returns; + * Index [0..MAX_N_FILE_NAMES) where the filename is kept + * -1 if the name can not be recorded + */ + +int lookup_file_name(const char *fname, int add_it) +{ + int i; + + for (i = 0; i < n_file_names; i++) { + if (strcmp(file_names[i], fname) == 0) + return i; + } + + if (add_it) { + if (n_file_names < MAX_N_FILE_NAMES) { + file_names[n_file_names] = strdup(fname); + return n_file_names++; + } + } + + return -1; +} + + +const char *srcpos_filename_for_num(int filenum) +{ + if (0 <= filenum && filenum < n_file_names) { + return file_names[filenum]; + } + + return 0; +} + + +const char *srcpos_get_filename(void) +{ + return srcpos_filename_for_num(srcpos_filenum); +} diff --git a/arch/powerpc/boot/dtc-src/srcpos.h b/arch/powerpc/boot/dtc-src/srcpos.h new file mode 100644 index 00000000000..ce7ab5ba5b4 --- /dev/null +++ b/arch/powerpc/boot/dtc-src/srcpos.h @@ -0,0 +1,75 @@ +/* + * Copyright 2007 Jon Loeliger, Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + +/* + * Augment the standard YYLTYPE with a filenum index into an + * array of all opened filenames. + */ + +#if ! defined(YYLTYPE) && ! defined(YYLTYPE_IS_DECLARED) +typedef struct YYLTYPE { + int first_line; + int first_column; + int last_line; + int last_column; + int filenum; +} YYLTYPE; + +#define YYLTYPE_IS_DECLARED 1 +#define YYLTYPE_IS_TRIVIAL 1 +#endif + +/* Cater to old parser templates. */ +#ifndef YYID +#define YYID(n) (n) +#endif + +#define YYLLOC_DEFAULT(Current, Rhs, N) \ + do \ + if (YYID (N)) \ + { \ + (Current).first_line = YYRHSLOC (Rhs, 1).first_line; \ + (Current).first_column = YYRHSLOC (Rhs, 1).first_column; \ + (Current).last_line = YYRHSLOC (Rhs, N).last_line; \ + (Current).last_column = YYRHSLOC (Rhs, N).last_column; \ + (Current).filenum = YYRHSLOC (Rhs, N).filenum; \ + } \ + else \ + { \ + (Current).first_line = (Current).last_line = \ + YYRHSLOC (Rhs, 0).last_line; \ + (Current).first_column = (Current).last_column = \ + YYRHSLOC (Rhs, 0).last_column; \ + (Current).filenum = YYRHSLOC (Rhs, 0).filenum; \ + } \ + while (YYID (0)) + + + +extern void yyerror(char const *); + +extern int srcpos_filenum; + +extern int push_input_file(const char *filename); +extern int pop_input_file(void); + +extern FILE *dtc_open_file(const char *fname); +extern int lookup_file_name(const char *fname, int add_it); +extern const char *srcpos_filename_for_num(int filenum); +const char *srcpos_get_filename(void); diff --git a/arch/powerpc/boot/dtc-src/treesource.c b/arch/powerpc/boot/dtc-src/treesource.c new file mode 100644 index 00000000000..a6a77679763 --- /dev/null +++ b/arch/powerpc/boot/dtc-src/treesource.c @@ -0,0 +1,275 @@ +/* + * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2005. + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + +#include "dtc.h" +#include "srcpos.h" + +extern FILE *yyin; +extern int yyparse(void); +extern void yyerror(char const *); + +struct boot_info *the_boot_info; + +struct boot_info *dt_from_source(const char *fname) +{ + the_boot_info = NULL; + + push_input_file(fname); + + if (yyparse() != 0) + return NULL; + + fill_fullpaths(the_boot_info->dt, ""); + + return the_boot_info; +} + +static void write_prefix(FILE *f, int level) +{ + int i; + + for (i = 0; i < level; i++) + fputc('\t', f); +} + +int isstring(char c) +{ + return (isprint(c) + || (c == '\0') + || strchr("\a\b\t\n\v\f\r", c)); +} + +static void write_propval_string(FILE *f, struct data val) +{ + const char *str = val.val; + int i; + int newchunk = 1; + struct marker *m = val.markers; + + assert(str[val.len-1] == '\0'); + + for (i = 0; i < (val.len-1); i++) { + char c = str[i]; + + if (newchunk) { + while (m && (m->offset <= i)) { + if (m->type == LABEL) { + assert(m->offset == i); + fprintf(f, "%s: ", m->ref); + } + m = m->next; + } + fprintf(f, "\""); + newchunk = 0; + } + + switch (c) { + case '\a': + fprintf(f, "\\a"); + break; + case '\b': + fprintf(f, "\\b"); + break; + case '\t': + fprintf(f, "\\t"); + break; + case '\n': + fprintf(f, "\\n"); + break; + case '\v': + fprintf(f, "\\v"); + break; + case '\f': + fprintf(f, "\\f"); + break; + case '\r': + fprintf(f, "\\r"); + break; + case '\\': + fprintf(f, "\\\\"); + break; + case '\"': + fprintf(f, "\\\""); + break; + case '\0': + fprintf(f, "\", "); + newchunk = 1; + break; + default: + if (isprint(c)) + fprintf(f, "%c", c); + else + fprintf(f, "\\x%02hhx", c); + } + } + fprintf(f, "\""); + + /* Wrap up any labels at the end of the value */ + for_each_marker_of_type(m, LABEL) { + assert (m->offset == val.len); + fprintf(f, " %s:", m->ref); + } +} + +static void write_propval_cells(FILE *f, struct data val) +{ + void *propend = val.val + val.len; + cell_t *cp = (cell_t *)val.val; + struct marker *m = val.markers; + + fprintf(f, "<"); + for (;;) { + while (m && (m->offset <= ((char *)cp - val.val))) { + if (m->type == LABEL) { + assert(m->offset == ((char *)cp - val.val)); + fprintf(f, "%s: ", m->ref); + } + m = m->next; + } + + fprintf(f, "0x%x", be32_to_cpu(*cp++)); + if ((void *)cp >= propend) + break; + fprintf(f, " "); + } + + /* Wrap up any labels at the end of the value */ + for_each_marker_of_type(m, LABEL) { + assert (m->offset == val.len); + fprintf(f, " %s:", m->ref); + } + fprintf(f, ">"); +} + +static void write_propval_bytes(FILE *f, struct data val) +{ + void *propend = val.val + val.len; + const char *bp = val.val; + struct marker *m = val.markers; + + fprintf(f, "["); + for (;;) { + while (m && (m->offset == (bp-val.val))) { + if (m->type == LABEL) + fprintf(f, "%s: ", m->ref); + m = m->next; + } + + fprintf(f, "%02hhx", *bp++); + if ((void *)bp >= propend) + break; + fprintf(f, " "); + } + + /* Wrap up any labels at the end of the value */ + for_each_marker_of_type(m, LABEL) { + assert (m->offset == val.len); + fprintf(f, " %s:", m->ref); + } + fprintf(f, "]"); +} + +static void write_propval(FILE *f, struct property *prop) +{ + int len = prop->val.len; + const char *p = prop->val.val; + struct marker *m = prop->val.markers; + int nnotstring = 0, nnul = 0; + int nnotstringlbl = 0, nnotcelllbl = 0; + int i; + + if (len == 0) { + fprintf(f, ";\n"); + return; + } + + for (i = 0; i < len; i++) { + if (! isstring(p[i])) + nnotstring++; + if (p[i] == '\0') + nnul++; + } + + for_each_marker_of_type(m, LABEL) { + if ((m->offset > 0) && (prop->val.val[m->offset - 1] != '\0')) + nnotstringlbl++; + if ((m->offset % sizeof(cell_t)) != 0) + nnotcelllbl++; + } + + fprintf(f, " = "); + if ((p[len-1] == '\0') && (nnotstring == 0) && (nnul < (len-nnul)) + && (nnotstringlbl == 0)) { + write_propval_string(f, prop->val); + } else if (((len % sizeof(cell_t)) == 0) && (nnotcelllbl == 0)) { + write_propval_cells(f, prop->val); + } else { + write_propval_bytes(f, prop->val); + } + + fprintf(f, ";\n"); +} + +static void write_tree_source_node(FILE *f, struct node *tree, int level) +{ + struct property *prop; + struct node *child; + + write_prefix(f, level); + if (tree->label) + fprintf(f, "%s: ", tree->label); + if (tree->name && (*tree->name)) + fprintf(f, "%s {\n", tree->name); + else + fprintf(f, "/ {\n"); + + for_each_property(tree, prop) { + write_prefix(f, level+1); + if (prop->label) + fprintf(f, "%s: ", prop->label); + fprintf(f, "%s", prop->name); + write_propval(f, prop); + } + for_each_child(tree, child) { + fprintf(f, "\n"); + write_tree_source_node(f, child, level+1); + } + write_prefix(f, level); + fprintf(f, "};\n"); +} + + +void dt_to_source(FILE *f, struct boot_info *bi) +{ + struct reserve_info *re; + + fprintf(f, "/dts-v1/;\n\n"); + + for (re = bi->reservelist; re; re = re->next) { + if (re->label) + fprintf(f, "%s: ", re->label); + fprintf(f, "/memreserve/\t0x%016llx 0x%016llx;\n", + (unsigned long long)re->re.address, + (unsigned long long)re->re.size); + } + + write_tree_source_node(f, bi->dt, 0); +} + diff --git a/arch/powerpc/boot/dtc-src/version_gen.h b/arch/powerpc/boot/dtc-src/version_gen.h new file mode 100644 index 00000000000..6c343031538 --- /dev/null +++ b/arch/powerpc/boot/dtc-src/version_gen.h @@ -0,0 +1 @@ +#define DTC_VERSION "DTC 1.0.0-gd6f9b62f" diff --git a/arch/powerpc/boot/dts/adder875-redboot.dts b/arch/powerpc/boot/dts/adder875-redboot.dts new file mode 100644 index 00000000000..930bfb3894e --- /dev/null +++ b/arch/powerpc/boot/dts/adder875-redboot.dts @@ -0,0 +1,184 @@ +/* + * Device Tree Source for MPC885 ADS running RedBoot + * + * Copyright 2006 MontaVista Software, Inc. + * Copyright 2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; +/ { + model = "Analogue & Micro Adder MPC875"; + compatible = "analogue-and-micro,adder875"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + console = &console; + ethernet0 = ð0; + ethernet1 = ð1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,875@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <16>; + i-cache-line-size = <16>; + d-cache-size = <8192>; + i-cache-size = <8192>; + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + interrupts = <15 2>; // decrementer interrupt + interrupt-parent = <&PIC>; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0x01000000>; + }; + + localbus@fa200100 { + compatible = "fsl,mpc885-localbus", "fsl,pq1-localbus", + "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0xfa200100 0x40>; + + ranges = < + 0 0 0xfe000000 0x00800000 + 2 0 0xfa100000 0x00008000 + >; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x800000>; + bank-width = <2>; + device-width = <2>; + }; + }; + + soc@fa200000 { + compatible = "fsl,mpc875-immr", "fsl,pq1-soc", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xfa200000 0x00004000>; + + // Temporary until code stops depending on it. + device_type = "soc"; + + // Temporary until get_immrbase() is fixed. + reg = <0xfa200000 0x4000>; + + mdio@e00 { + compatible = "fsl,mpc875-fec-mdio", "fsl,pq1-fec-mdio"; + reg = <0xe00 0x188>; + #address-cells = <1>; + #size-cells = <0>; + + PHY0: ethernet-phy@0 { + reg = <0>; + device_type = "ethernet-phy"; + }; + + PHY1: ethernet-phy@1 { + reg = <1>; + device_type = "ethernet-phy"; + }; + }; + + eth0: ethernet@e00 { + device_type = "network"; + compatible = "fsl,mpc875-fec-enet", + "fsl,pq1-fec-enet"; + reg = <0xe00 0x188>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <3 1>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY0>; + linux,network-index = <0>; + }; + + eth1: ethernet@1e00 { + device_type = "network"; + compatible = "fsl,mpc875-fec-enet", + "fsl,pq1-fec-enet"; + reg = <0x1e00 0x188>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <7 1>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY1>; + linux,network-index = <1>; + }; + + PIC: interrupt-controller@0 { + interrupt-controller; + #interrupt-cells = <2>; + reg = <0 0x24>; + compatible = "fsl,mpc875-pic", "fsl,pq1-pic"; + }; + + cpm@9c0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc875-cpm", "fsl,cpm1", "simple-bus"; + interrupts = <0>; // cpm error interrupt + interrupt-parent = <&CPM_PIC>; + reg = <0x9c0 0x40>; + ranges; + + muram { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x2000 0x2000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0 0x1c00>; + }; + }; + + brg@9f0 { + compatible = "fsl,mpc875-brg", + "fsl,cpm1-brg", + "fsl,cpm-brg"; + reg = <0x9f0 0x10>; + }; + + CPM_PIC: interrupt-controller@930 { + interrupt-controller; + #interrupt-cells = <1>; + interrupts = <5 2 0 2>; + interrupt-parent = <&PIC>; + reg = <0x930 0x20>; + compatible = "fsl,mpc875-cpm-pic", + "fsl,cpm1-pic"; + }; + + console: serial@a80 { + device_type = "serial"; + compatible = "fsl,mpc875-smc-uart", + "fsl,cpm1-smc-uart"; + reg = <0xa80 0x10 0x3e80 0x40>; + interrupts = <4>; + interrupt-parent = <&CPM_PIC>; + fsl,cpm-brg = <1>; + fsl,cpm-command = <0x0090>; + current-speed = <115200>; + }; + }; + }; + + chosen { + linux,stdout-path = &console; + }; +}; diff --git a/arch/powerpc/boot/dts/adder875-uboot.dts b/arch/powerpc/boot/dts/adder875-uboot.dts new file mode 100644 index 00000000000..0197242dacf --- /dev/null +++ b/arch/powerpc/boot/dts/adder875-uboot.dts @@ -0,0 +1,183 @@ +/* + * Device Tree Source for MPC885 ADS running U-Boot + * + * Copyright 2006 MontaVista Software, Inc. + * Copyright 2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; +/ { + model = "Analogue & Micro Adder MPC875"; + compatible = "analogue-and-micro,adder875"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + console = &console; + ethernet0 = ð0; + ethernet1 = ð1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,875@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <16>; + i-cache-line-size = <16>; + d-cache-size = <8192>; + i-cache-size = <8192>; + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + interrupts = <15 2>; // decrementer interrupt + interrupt-parent = <&PIC>; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0x01000000>; + }; + + localbus@ff000100 { + compatible = "fsl,mpc885-localbus", "fsl,pq1-localbus", + "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0xff000100 0x40>; + + ranges = < + 0 0 0xfe000000 0x01000000 + >; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x800000>; + bank-width = <2>; + device-width = <2>; + }; + }; + + soc@ff000000 { + compatible = "fsl,mpc875-immr", "fsl,pq1-soc", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xff000000 0x00004000>; + + // Temporary until code stops depending on it. + device_type = "soc"; + + // Temporary until get_immrbase() is fixed. + reg = <0xff000000 0x4000>; + + mdio@e00 { + compatible = "fsl,mpc875-fec-mdio", "fsl,pq1-fec-mdio"; + reg = <0xe00 0x188>; + #address-cells = <1>; + #size-cells = <0>; + + PHY0: ethernet-phy@0 { + reg = <0>; + device_type = "ethernet-phy"; + }; + + PHY1: ethernet-phy@1 { + reg = <1>; + device_type = "ethernet-phy"; + }; + }; + + eth0: ethernet@e00 { + device_type = "network"; + compatible = "fsl,mpc875-fec-enet", + "fsl,pq1-fec-enet"; + reg = <0xe00 0x188>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <3 1>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY0>; + linux,network-index = <0>; + }; + + eth1: ethernet@1e00 { + device_type = "network"; + compatible = "fsl,mpc875-fec-enet", + "fsl,pq1-fec-enet"; + reg = <0x1e00 0x188>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <7 1>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY1>; + linux,network-index = <1>; + }; + + PIC: interrupt-controller@0 { + interrupt-controller; + #interrupt-cells = <2>; + reg = <0 0x24>; + compatible = "fsl,mpc875-pic", "fsl,pq1-pic"; + }; + + cpm@9c0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc875-cpm", "fsl,cpm1", "simple-bus"; + interrupts = <0>; // cpm error interrupt + interrupt-parent = <&CPM_PIC>; + reg = <0x9c0 0x40>; + ranges; + + muram { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x2000 0x2000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0 0x1c00>; + }; + }; + + brg@9f0 { + compatible = "fsl,mpc875-brg", + "fsl,cpm1-brg", + "fsl,cpm-brg"; + reg = <0x9f0 0x10>; + }; + + CPM_PIC: interrupt-controller@930 { + interrupt-controller; + #interrupt-cells = <1>; + interrupts = <5 2 0 2>; + interrupt-parent = <&PIC>; + reg = <0x930 0x20>; + compatible = "fsl,mpc875-cpm-pic", + "fsl,cpm1-pic"; + }; + + console: serial@a80 { + device_type = "serial"; + compatible = "fsl,mpc875-smc-uart", + "fsl,cpm1-smc-uart"; + reg = <0xa80 0x10 0x3e80 0x40>; + interrupts = <4>; + interrupt-parent = <&CPM_PIC>; + fsl,cpm-brg = <1>; + fsl,cpm-command = <0x0090>; + current-speed = <115200>; + }; + }; + }; + + chosen { + linux,stdout-path = &console; + }; +}; diff --git a/arch/powerpc/boot/dts/bamboo.dts b/arch/powerpc/boot/dts/bamboo.dts index cb2fb50a281..29f1a6f3e37 100644 --- a/arch/powerpc/boot/dts/bamboo.dts +++ b/arch/powerpc/boot/dts/bamboo.dts @@ -16,14 +16,24 @@ #size-cells = <1>; model = "amcc,bamboo"; compatible = "amcc,bamboo"; - dcr-parent = <&/cpus/PowerPC,440EP@0>; + dcr-parent = <&/cpus/cpu@0>; + + aliases { + ethernet0 = &EMAC0; + ethernet1 = &EMAC1; + serial0 = &UART0; + serial1 = &UART1; + serial2 = &UART2; + serial3 = &UART3; + }; cpus { #address-cells = <1>; #size-cells = <0>; - PowerPC,440EP@0 { + cpu@0 { device_type = "cpu"; + model = "PowerPC,440EP"; reg = <0>; clock-frequency = <0>; /* Filled in by zImage */ timebase-frequency = <0>; /* Filled in by zImage */ @@ -126,7 +136,6 @@ #address-cells = <2>; #size-cells = <1>; clock-frequency = <0>; /* Filled in by zImage */ - ranges; interrupts = <5 1>; interrupt-parent = <&UIC1>; }; @@ -238,11 +247,56 @@ zmii-device = <&ZMII0>; zmii-channel = <1>; }; + + usb@ef601000 { + compatible = "ohci-be"; + reg = <ef601000 80>; + interrupts = <8 1 9 1>; + interrupt-parent = < &UIC1 >; + }; + }; + + PCI0: pci@ec000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb440ep-pci", "ibm,plb-pci"; + primary; + reg = <0 eec00000 8 /* Config space access */ + 0 eed00000 4 /* IACK */ + 0 eed00000 4 /* Special cycle */ + 0 ef400000 40>; /* Internal registers */ + + /* Outbound ranges, one memory and one IO, + * later cannot be changed. Chip supports a second + * IO range but we don't use it for now + */ + ranges = <02000000 0 a0000000 0 a0000000 0 20000000 + 01000000 0 00000000 0 e8000000 0 00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <42000000 0 0 0 0 0 80000000>; + + /* Bamboo has all 4 IRQ pins tied together per slot */ + interrupt-map-mask = <f800 0 0 0>; + interrupt-map = < + /* IDSEL 1 */ + 0800 0 0 0 &UIC0 1c 8 + + /* IDSEL 2 */ + 1000 0 0 0 &UIC0 1b 8 + + /* IDSEL 3 */ + 1800 0 0 0 &UIC0 1a 8 + + /* IDSEL 4 */ + 2000 0 0 0 &UIC0 19 8 + >; }; }; chosen { linux,stdout-path = "/plb/opb/serial@ef600300"; - bootargs = "console=ttyS0,115200"; }; }; diff --git a/arch/powerpc/boot/dts/cm5200.dts b/arch/powerpc/boot/dts/cm5200.dts new file mode 100644 index 00000000000..30737eafe68 --- /dev/null +++ b/arch/powerpc/boot/dts/cm5200.dts @@ -0,0 +1,234 @@ +/* + * CM5200 board Device Tree Source + * + * Copyright (C) 2007 Semihalf + * Marian Balakowicz <m8@semihalf.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/* + * WARNING: Do not depend on this tree layout remaining static just yet. + * The MPC5200 device tree conventions are still in flux + * Keep an eye on the linuxppc-dev mailing list for more details + */ + +/ { + model = "schindler,cm5200"; + compatible = "schindler,cm5200"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,5200@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; + i-cache-line-size = <20>; + d-cache-size = <4000>; // L1, 16K + i-cache-size = <4000>; // L1, 16K + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + }; + }; + + memory { + device_type = "memory"; + reg = <00000000 04000000>; // 64MB + }; + + soc5200@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc5200b-immr"; + ranges = <0 f0000000 0000c000>; + reg = <f0000000 00000100>; + bus-frequency = <0>; // from bootloader + system-frequency = <0>; // from bootloader + + cdm@200 { + compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm"; + reg = <200 38>; + }; + + mpc5200_pic: pic@500 { + // 5200 interrupts are encoded into two levels; + interrupt-controller; + #interrupt-cells = <3>; + compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic"; + reg = <500 80>; + }; + + timer@600 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <600 10>; + interrupts = <1 9 0>; + interrupt-parent = <&mpc5200_pic>; + fsl,has-wdt; + }; + + timer@610 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <610 10>; + interrupts = <1 a 0>; + interrupt-parent = <&mpc5200_pic>; + }; + + timer@620 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <620 10>; + interrupts = <1 b 0>; + interrupt-parent = <&mpc5200_pic>; + }; + + timer@630 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <630 10>; + interrupts = <1 c 0>; + interrupt-parent = <&mpc5200_pic>; + }; + + timer@640 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <640 10>; + interrupts = <1 d 0>; + interrupt-parent = <&mpc5200_pic>; + }; + + timer@650 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <650 10>; + interrupts = <1 e 0>; + interrupt-parent = <&mpc5200_pic>; + }; + + timer@660 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <660 10>; + interrupts = <1 f 0>; + interrupt-parent = <&mpc5200_pic>; + }; + + timer@670 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <670 10>; + interrupts = <1 10 0>; + interrupt-parent = <&mpc5200_pic>; + }; + + rtc@800 { // Real time clock + compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc"; + reg = <800 100>; + interrupts = <1 5 0 1 6 0>; + interrupt-parent = <&mpc5200_pic>; + }; + + gpio@b00 { + compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio"; + reg = <b00 40>; + interrupts = <1 7 0>; + interrupt-parent = <&mpc5200_pic>; + }; + + gpio@c00 { + compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup"; + reg = <c00 40>; + interrupts = <1 8 0 0 3 0>; + interrupt-parent = <&mpc5200_pic>; + }; + + spi@f00 { + compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; + reg = <f00 20>; + interrupts = <2 d 0 2 e 0>; + interrupt-parent = <&mpc5200_pic>; + }; + + usb@1000 { + compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be"; + reg = <1000 ff>; + interrupts = <2 6 0>; + interrupt-parent = <&mpc5200_pic>; + }; + + dma-controller@1200 { + compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm"; + reg = <1200 80>; + interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 + 3 4 0 3 5 0 3 6 0 3 7 0 + 3 8 0 3 9 0 3 a 0 3 b 0 + 3 c 0 3 d 0 3 e 0 3 f 0>; + interrupt-parent = <&mpc5200_pic>; + }; + + xlb@1f00 { + compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb"; + reg = <1f00 100>; + }; + + serial@2000 { // PSC1 + device_type = "serial"; + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + port-number = <0>; // Logical port assignment + reg = <2000 100>; + interrupts = <2 1 0>; + interrupt-parent = <&mpc5200_pic>; + }; + + serial@2200 { // PSC2 + device_type = "serial"; + compatible = "fsl,mpc5200-psc-uart"; + port-number = <1>; // Logical port assignment + reg = <2200 100>; + interrupts = <2 2 0>; + interrupt-parent = <&mpc5200_pic>; + }; + + serial@2400 { // PSC3 + device_type = "serial"; + compatible = "fsl,mpc5200-psc-uart"; + port-number = <2>; // Logical port assignment + reg = <2400 100>; + interrupts = <2 3 0>; + interrupt-parent = <&mpc5200_pic>; + }; + + serial@2c00 { // PSC6 + device_type = "serial"; + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + port-number = <5>; // Logical port assignment + reg = <2c00 100>; + interrupts = <2 4 0>; + interrupt-parent = <&mpc5200_pic>; + }; + + ethernet@3000 { + device_type = "network"; + compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; + reg = <3000 800>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <2 5 0>; + interrupt-parent = <&mpc5200_pic>; + }; + + i2c@3d40 { + compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; + reg = <3d40 40>; + interrupts = <2 10 0>; + interrupt-parent = <&mpc5200_pic>; + fsl5200-clocking; + }; + + sram@8000 { + compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram"; + reg = <8000 4000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/ebony.dts b/arch/powerpc/boot/dts/ebony.dts index bc259972aaa..7aad135a44b 100644 --- a/arch/powerpc/boot/dts/ebony.dts +++ b/arch/powerpc/boot/dts/ebony.dts @@ -16,14 +16,22 @@ #size-cells = <1>; model = "ibm,ebony"; compatible = "ibm,ebony"; - dcr-parent = <&/cpus/PowerPC,440GP@0>; + dcr-parent = <&/cpus/cpu@0>; + + aliases { + ethernet0 = &EMAC0; + ethernet1 = &EMAC1; + serial0 = &UART0; + serial1 = &UART1; + }; cpus { #address-cells = <1>; #size-cells = <0>; - PowerPC,440GP@0 { + cpu@0 { device_type = "cpu"; + model = "PowerPC,440GP"; reg = <0>; clock-frequency = <0>; // Filled in by zImage timebase-frequency = <0>; // Filled in by zImage @@ -150,9 +158,10 @@ }; }; - ds1743@1,0 { + nvram@1,0 { /* NVRAM & RTC */ - compatible = "ds1743"; + compatible = "ds1743-nvram"; + #bytes = <2000>; reg = <1 0 2000>; }; @@ -284,12 +293,43 @@ }; - PCIX0: pci@1234 { + PCIX0: pci@20ec00000 { device_type = "pci"; - /* FIXME */ - reg = <2 0ec00000 8 - 2 0ec80000 f0 - 2 0ec80100 fc>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb440gp-pcix", "ibm,plb-pcix"; + primary; + reg = <2 0ec00000 8 /* Config space access */ + 0 0 0 /* no IACK cycles */ + 2 0ed00000 4 /* Special cycles */ + 2 0ec80000 f0 /* Internal registers */ + 2 0ec80100 fc>; /* Internal messaging registers */ + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <02000000 0 80000000 00000003 80000000 0 80000000 + 01000000 0 00000000 00000002 08000000 0 00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <42000000 0 0 0 0 0 80000000>; + + /* Ebony has all 4 IRQ pins tied together per slot */ + interrupt-map-mask = <f800 0 0 0>; + interrupt-map = < + /* IDSEL 1 */ + 0800 0 0 0 &UIC0 17 8 + + /* IDSEL 2 */ + 1000 0 0 0 &UIC0 18 8 + + /* IDSEL 3 */ + 1800 0 0 0 &UIC0 19 8 + + /* IDSEL 4 */ + 2000 0 0 0 &UIC0 1a 8 + >; }; }; diff --git a/arch/powerpc/boot/dts/ep405.dts b/arch/powerpc/boot/dts/ep405.dts new file mode 100644 index 00000000000..92938557ac8 --- /dev/null +++ b/arch/powerpc/boot/dts/ep405.dts @@ -0,0 +1,228 @@ +/* + * Device Tree Source for EP405 + * + * Copyright 2007 IBM Corp. + * Benjamin Herrenschmidt <benh@kernel.crashing.org> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "ep405"; + compatible = "ep405"; + dcr-parent = <&/cpus/cpu@0>; + + aliases { + ethernet0 = &EMAC; + serial0 = &UART0; + serial1 = &UART1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,405GP"; + reg = <0>; + clock-frequency = <bebc200>; /* Filled in by zImage */ + timebase-frequency = <0>; /* Filled in by zImage */ + i-cache-line-size = <20>; + d-cache-line-size = <20>; + i-cache-size = <4000>; + d-cache-size = <4000>; + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0>; /* Filled in by zImage */ + }; + + UIC0: interrupt-controller { + compatible = "ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0c0 9>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + plb { + compatible = "ibm,plb3"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by zImage */ + + SDRAM0: memory-controller { + compatible = "ibm,sdram-405gp"; + dcr-reg = <010 2>; + }; + + MAL: mcmal { + compatible = "ibm,mcmal-405gp", "ibm,mcmal"; + dcr-reg = <180 62>; + num-tx-chans = <1>; + num-rx-chans = <1>; + interrupt-parent = <&UIC0>; + interrupts = < + b 4 /* TXEOB */ + c 4 /* RXEOB */ + a 4 /* SERR */ + d 4 /* TXDE */ + e 4 /* RXDE */>; + }; + + POB0: opb { + compatible = "ibm,opb-405gp", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <ef600000 ef600000 a00000>; + dcr-reg = <0a0 5>; + clock-frequency = <0>; /* Filled in by zImage */ + + UART0: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600300 8>; + virtual-reg = <ef600300>; + clock-frequency = <0>; /* Filled in by zImage */ + current-speed = <2580>; + interrupt-parent = <&UIC0>; + interrupts = <0 4>; + }; + + UART1: serial@ef600400 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600400 8>; + virtual-reg = <ef600400>; + clock-frequency = <0>; /* Filled in by zImage */ + current-speed = <2580>; + interrupt-parent = <&UIC0>; + interrupts = <1 4>; + }; + + IIC: i2c@ef600500 { + compatible = "ibm,iic-405gp", "ibm,iic"; + reg = <ef600500 11>; + interrupt-parent = <&UIC0>; + interrupts = <2 4>; + }; + + GPIO: gpio@ef600700 { + compatible = "ibm,gpio-405gp"; + reg = <ef600700 20>; + }; + + EMAC: ethernet@ef600800 { + linux,network-index = <0>; + device_type = "network"; + compatible = "ibm,emac-405gp", "ibm,emac"; + interrupt-parent = <&UIC0>; + interrupts = < + f 4 /* Ethernet */ + 9 4 /* Ethernet Wake Up */>; + local-mac-address = [000000000000]; /* Filled in by zImage */ + reg = <ef600800 70>; + mal-device = <&MAL>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <5dc>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rmii"; + phy-map = <00000000>; + }; + + }; + + EBC0: ebc { + compatible = "ibm,ebc-405gp", "ibm,ebc"; + dcr-reg = <012 2>; + #address-cells = <2>; + #size-cells = <1>; + + + /* The ranges property is supplied by the bootwrapper + * and is based on the firmware's configuration of the + * EBC bridge + */ + clock-frequency = <0>; /* Filled in by zImage */ + + /* NVRAM and RTC */ + nvrtc@4,200000 { + compatible = "ds1742"; + reg = <4 200000 0>; /* size fixed up by zImage */ + }; + + /* "BCSR" CPLD contains a PCI irq controller */ + bcsr@4,0 { + compatible = "ep405-bcsr"; + reg = <4 0 10>; + interrupt-controller; + /* Routing table */ + irq-routing = [ 00 /* SYSERR */ + 01 /* STTM */ + 01 /* RTC */ + 01 /* FENET */ + 02 /* NB PCIIRQ mux ? */ + 03 /* SB Winbond 8259 ? */ + 04 /* Serial Ring */ + 05 /* USB (ep405pc) */ + 06 /* XIRQ 0 */ + 06 /* XIRQ 1 */ + 06 /* XIRQ 2 */ + 06 /* XIRQ 3 */ + 06 /* XIRQ 4 */ + 06 /* XIRQ 5 */ + 06 /* XIRQ 6 */ + 07]; /* Reserved */ + }; + }; + + PCI0: pci@ec000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb405gp-pci", "ibm,plb-pci"; + primary; + reg = <eec00000 8 /* Config space access */ + eed80000 4 /* IACK */ + eed80000 4 /* Special cycle */ + ef480000 40>; /* Internal registers */ + + /* Outbound ranges, one memory and one IO, + * later cannot be changed. Chip supports a second + * IO range but we don't use it for now + */ + ranges = <02000000 0 80000000 80000000 0 20000000 + 01000000 0 00000000 e8000000 0 00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <42000000 0 0 0 0 80000000>; + + /* That's all I know about IRQs on that thing ... */ + interrupt-map-mask = <f800 0 0 0>; + interrupt-map = < + /* USB */ + 7000 0 0 0 &UIC0 1e 8 /* IRQ5 */ + >; + }; + }; + + chosen { + linux,stdout-path = "/plb/opb/serial@ef600300"; + }; +}; diff --git a/arch/powerpc/boot/dts/ep8248e.dts b/arch/powerpc/boot/dts/ep8248e.dts new file mode 100644 index 00000000000..5d2fb76a72c --- /dev/null +++ b/arch/powerpc/boot/dts/ep8248e.dts @@ -0,0 +1,207 @@ +/* + * Device Tree for the Embedded Planet EP8248E board running PlanetCore. + * + * Copyright 2007 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; +/ { + model = "EP8248E"; + compatible = "fsl,ep8248e"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + planetcore-SMC1 = &smc1; + planetcore-SCC1 = &scc1; + ethernet0 = ð0; + ethernet1 = ð1; + serial0 = &smc1; + serial1 = &scc1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8248@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <16384>; + i-cache-size = <16384>; + timebase-frequency = <0>; + clock-frequency = <0>; + }; + }; + + localbus@f0010100 { + compatible = "fsl,mpc8248-localbus", + "fsl,pq2-localbus", + "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0xf0010100 0x40>; + + ranges = <0 0 0xfc000000 0x04000000 + 1 0 0xfa000000 0x00008000>; + + flash@0,3800000 { + compatible = "cfi-flash"; + reg = <0 0x3800000 0x800000>; + bank-width = <4>; + device-width = <2>; + }; + + bcsr@1,0 { + #address-cells = <2>; + #size-cells = <1>; + reg = <1 0 0x10>; + compatible = "fsl,ep8248e-bcsr"; + ranges; + + mdio { + device_type = "mdio"; + compatible = "fsl,ep8248e-mdio-bitbang"; + #address-cells = <1>; + #size-cells = <0>; + reg = <1 8 1>; + + PHY0: ethernet-phy@0 { + interrupt-parent = <&PIC>; + reg = <0>; + device_type = "ethernet-phy"; + }; + + PHY1: ethernet-phy@1 { + interrupt-parent = <&PIC>; + reg = <1>; + device_type = "ethernet-phy"; + }; + }; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0>; + }; + + soc@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8248-immr", "fsl,pq2-soc", "simple-bus"; + ranges = <0x00000000 0xf0000000 0x00053000>; + + // Temporary until code stops depending on it. + device_type = "soc"; + + // Temporary -- will go away once kernel uses ranges for get_immrbase(). + reg = <0xf0000000 0x00053000>; + + cpm@119c0 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + compatible = "fsl,mpc8248-cpm", "fsl,cpm2", + "simple-bus"; + reg = <0x119c0 0x30>; + ranges; + + muram { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x10000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0 0x1100 0x1140 + 0xec0 0x9800 0x800>; + }; + }; + + brg@119f0 { + compatible = "fsl,mpc8248-brg", + "fsl,cpm2-brg", + "fsl,cpm-brg"; + reg = <0x119f0 0x10 0x115f0 0x10>; + }; + + /* Monitor port/SMC1 */ + smc1: serial@11a80 { + device_type = "serial"; + compatible = "fsl,mpc8248-smc-uart", + "fsl,cpm2-smc-uart"; + reg = <0x11a80 0x20 0x1100 0x40>; + interrupts = <4 8>; + interrupt-parent = <&PIC>; + fsl,cpm-brg = <7>; + fsl,cpm-command = <0x1d000000>; + linux,planetcore-label = "SMC1"; + }; + + /* "Serial" port/SCC1 */ + scc1: serial@11a00 { + device_type = "serial"; + compatible = "fsl,mpc8248-scc-uart", + "fsl,cpm2-scc-uart"; + reg = <0x11a00 0x20 0x8000 0x100>; + interrupts = <40 8>; + interrupt-parent = <&PIC>; + fsl,cpm-brg = <1>; + fsl,cpm-command = <0x00800000>; + linux,planetcore-label = "SCC1"; + }; + + eth0: ethernet@11300 { + device_type = "network"; + compatible = "fsl,mpc8248-fcc-enet", + "fsl,cpm2-fcc-enet"; + reg = <0x11300 0x20 0x8400 0x100 0x11390 1>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <32 8>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY0>; + linux,network-index = <0>; + fsl,cpm-command = <0x12000300>; + }; + + eth1: ethernet@11320 { + device_type = "network"; + compatible = "fsl,mpc8248-fcc-enet", + "fsl,cpm2-fcc-enet"; + reg = <0x11320 0x20 0x8500 0x100 0x113b0 1>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <33 8>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY1>; + linux,network-index = <1>; + fsl,cpm-command = <0x16200300>; + }; + + usb@11b60 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc8248-usb", + "fsl,cpm2-usb"; + reg = <0x11b60 0x18 0x8b00 0x100>; + interrupt-parent = <&PIC>; + interrupts = <11 8>; + fsl,cpm-command = <0x2e600000>; + }; + }; + + PIC: interrupt-controller@10c00 { + #interrupt-cells = <2>; + interrupt-controller; + reg = <0x10c00 0x80>; + compatible = "fsl,mpc8248-pic", "fsl,pq2-pic"; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/haleakala.dts b/arch/powerpc/boot/dts/haleakala.dts new file mode 100644 index 00000000000..5dd3d15f0fe --- /dev/null +++ b/arch/powerpc/boot/dts/haleakala.dts @@ -0,0 +1,274 @@ +/* + * Device Tree Source for AMCC Haleakala (405EXr) + * + * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "amcc,haleakala"; + compatible = "amcc,kilauea"; + dcr-parent = <&/cpus/cpu@0>; + + aliases { + ethernet0 = &EMAC0; + serial0 = &UART0; + serial1 = &UART1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,405EXr"; + reg = <0>; + clock-frequency = <0>; /* Filled in by U-Boot */ + timebase-frequency = <0>; /* Filled in by U-Boot */ + i-cache-line-size = <20>; + d-cache-line-size = <20>; + i-cache-size = <4000>; /* 16 kB */ + d-cache-size = <4000>; /* 16 kB */ + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0>; /* Filled in by U-Boot */ + }; + + UIC0: interrupt-controller { + compatible = "ibm,uic-405exr", "ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0c0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-405exr","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0d0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <1e 4 1f 4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC2: interrupt-controller2 { + compatible = "ibm,uic-405exr","ibm,uic"; + interrupt-controller; + cell-index = <2>; + dcr-reg = <0e0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <1c 4 1d 4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + plb { + compatible = "ibm,plb-405exr", "ibm,plb4"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by U-Boot */ + + SDRAM0: memory-controller { + compatible = "ibm,sdram-405exr"; + dcr-reg = <010 2>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-405exr", "ibm,mcmal2"; + dcr-reg = <180 62>; + num-tx-chans = <2>; + num-rx-chans = <2>; + interrupt-parent = <&MAL0>; + interrupts = <0 1 2 3 4>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*TXEOB*/ 0 &UIC0 a 4 + /*RXEOB*/ 1 &UIC0 b 4 + /*SERR*/ 2 &UIC1 0 4 + /*TXDE*/ 3 &UIC1 1 4 + /*RXDE*/ 4 &UIC1 2 4>; + interrupt-map-mask = <ffffffff>; + }; + + POB0: opb { + compatible = "ibm,opb-405exr", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <80000000 80000000 10000000 + ef600000 ef600000 a00000 + f0000000 f0000000 10000000>; + dcr-reg = <0a0 5>; + clock-frequency = <0>; /* Filled in by U-Boot */ + + EBC0: ebc { + compatible = "ibm,ebc-405exr", "ibm,ebc"; + dcr-reg = <012 2>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by U-Boot */ + /* ranges property is supplied by U-Boot */ + interrupts = <5 1>; + interrupt-parent = <&UIC1>; + + nor_flash@0,0 { + compatible = "amd,s29gl512n", "cfi-flash"; + bank-width = <2>; + reg = <0 000000 4000000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "kernel"; + reg = <0 200000>; + }; + partition@200000 { + label = "root"; + reg = <200000 200000>; + }; + partition@400000 { + label = "user"; + reg = <400000 3b60000>; + }; + partition@3f60000 { + label = "env"; + reg = <3f60000 40000>; + }; + partition@3fa0000 { + label = "u-boot"; + reg = <3fa0000 60000>; + }; + }; + }; + + UART0: serial@ef600200 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600200 8>; + virtual-reg = <ef600200>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <1a 4>; + }; + + UART1: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600300 8>; + virtual-reg = <ef600300>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <1 4>; + }; + + IIC0: i2c@ef600400 { + compatible = "ibm,iic-405exr", "ibm,iic"; + reg = <ef600400 14>; + interrupt-parent = <&UIC0>; + interrupts = <2 4>; + }; + + IIC1: i2c@ef600500 { + compatible = "ibm,iic-405exr", "ibm,iic"; + reg = <ef600500 14>; + interrupt-parent = <&UIC0>; + interrupts = <7 4>; + }; + + + RGMII0: emac-rgmii@ef600b00 { + compatible = "ibm,rgmii-405exr", "ibm,rgmii"; + reg = <ef600b00 104>; + has-mdio; + }; + + EMAC0: ethernet@ef600900 { + linux,network-index = <0>; + device_type = "network"; + compatible = "ibm,emac-405exr", "ibm,emac4"; + interrupt-parent = <&EMAC0>; + interrupts = <0 1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0 &UIC0 18 4 + /*Wake*/ 1 &UIC1 1d 4>; + reg = <ef600900 70>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <5dc>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rgmii"; + phy-map = <00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + }; + + PCIE0: pciex@0a0000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-405exr", "ibm,plb-pciex"; + primary; + port = <0>; /* port number */ + reg = <a0000000 20000000 /* Config space access */ + ef000000 00001000>; /* Registers */ + dcr-reg = <040 020>; + sdr-base = <400>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <02000000 0 80000000 90000000 0 08000000 + 01000000 0 00000000 e0000000 0 00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <42000000 0 0 0 0 80000000>; + + /* This drives busses 0x00 to 0x3f */ + bus-range = <00 3f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0000 0 0 7>; + interrupt-map = < + 0000 0 0 1 &UIC2 0 4 /* swizzled int A */ + 0000 0 0 2 &UIC2 1 4 /* swizzled int B */ + 0000 0 0 3 &UIC2 2 4 /* swizzled int C */ + 0000 0 0 4 &UIC2 3 4 /* swizzled int D */>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/katmai.dts b/arch/powerpc/boot/dts/katmai.dts new file mode 100644 index 00000000000..9bdfc0ff3c2 --- /dev/null +++ b/arch/powerpc/boot/dts/katmai.dts @@ -0,0 +1,400 @@ +/* + * Device Tree Source for AMCC Katmai eval board + * + * Copyright (c) 2006, 2007 IBM Corp. + * Benjamin Herrenschmidt <benh@kernel.crashing.org> + * + * Copyright (c) 2006, 2007 IBM Corp. + * Josh Boyer <jwboyer@linux.vnet.ibm.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "amcc,katmai"; + compatible = "amcc,katmai"; + dcr-parent = <&/cpus/cpu@0>; + + aliases { + ethernet0 = &EMAC0; + serial0 = &UART0; + serial1 = &UART1; + serial2 = &UART2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,440SPe"; + reg = <0>; + clock-frequency = <0>; /* Filled in by zImage */ + timebase-frequency = <0>; /* Filled in by zImage */ + i-cache-line-size = <20>; + d-cache-line-size = <20>; + i-cache-size = <20000>; + d-cache-size = <20000>; + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0 0>; /* Filled in by zImage */ + }; + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-440spe","ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0c0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-440spe","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0d0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <1e 4 1f 4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC2: interrupt-controller2 { + compatible = "ibm,uic-440spe","ibm,uic"; + interrupt-controller; + cell-index = <2>; + dcr-reg = <0e0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <a 4 b 4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC3: interrupt-controller3 { + compatible = "ibm,uic-440spe","ibm,uic"; + interrupt-controller; + cell-index = <3>; + dcr-reg = <0f0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <10 4 11 4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + SDR0: sdr { + compatible = "ibm,sdr-440spe"; + dcr-reg = <00e 002>; + }; + + CPR0: cpr { + compatible = "ibm,cpr-440spe"; + dcr-reg = <00c 002>; + }; + + plb { + compatible = "ibm,plb-440spe", "ibm,plb-440gp", "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by zImage */ + + SDRAM0: sdram { + compatible = "ibm,sdram-440spe", "ibm,sdram-405gp"; + dcr-reg = <010 2>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-440spe", "ibm,mcmal2"; + dcr-reg = <180 62>; + num-tx-chans = <2>; + num-rx-chans = <1>; + interrupt-parent = <&MAL0>; + interrupts = <0 1 2 3 4>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*TXEOB*/ 0 &UIC1 6 4 + /*RXEOB*/ 1 &UIC1 7 4 + /*SERR*/ 2 &UIC1 1 4 + /*TXDE*/ 3 &UIC1 2 4 + /*RXDE*/ 4 &UIC1 3 4>; + }; + + POB0: opb { + compatible = "ibm,opb-440spe", "ibm,opb-440gp", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <00000000 4 e0000000 20000000>; + clock-frequency = <0>; /* Filled in by zImage */ + + EBC0: ebc { + compatible = "ibm,ebc-440spe", "ibm,ebc-440gp", "ibm,ebc"; + dcr-reg = <012 2>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by zImage */ + interrupts = <5 1>; + interrupt-parent = <&UIC1>; + }; + + UART0: serial@10000200 { + device_type = "serial"; + compatible = "ns16550"; + reg = <10000200 8>; + virtual-reg = <a0000200>; + clock-frequency = <0>; /* Filled in by zImage */ + current-speed = <1c200>; + interrupt-parent = <&UIC0>; + interrupts = <0 4>; + }; + + UART1: serial@10000300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <10000300 8>; + virtual-reg = <a0000300>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <1 4>; + }; + + + UART2: serial@10000600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <10000600 8>; + virtual-reg = <a0000600>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC1>; + interrupts = <5 4>; + }; + + IIC0: i2c@10000400 { + device_type = "i2c"; + compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic"; + reg = <10000400 14>; + interrupt-parent = <&UIC0>; + interrupts = <2 4>; + }; + + IIC1: i2c@10000500 { + device_type = "i2c"; + compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic"; + reg = <10000500 14>; + interrupt-parent = <&UIC0>; + interrupts = <3 4>; + }; + + EMAC0: ethernet@10000800 { + linux,network-index = <0>; + device_type = "network"; + compatible = "ibm,emac-440spe", "ibm,emac4"; + interrupt-parent = <&UIC1>; + interrupts = <1c 4 1d 4>; + reg = <10000800 70>; + local-mac-address = [000000000000]; + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <5dc>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "gmii"; + phy-map = <00000000>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + }; + + PCIX0: pci@c0ec00000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pcix-440spe", "ibm,plb-pcix"; + primary; + large-inbound-windows; + enable-msi-hole; + reg = <c 0ec00000 8 /* Config space access */ + 0 0 0 /* no IACK cycles */ + c 0ed00000 4 /* Special cycles */ + c 0ec80000 100 /* Internal registers */ + c 0ec80100 fc>; /* Internal messaging registers */ + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <02000000 0 80000000 0000000d 80000000 0 80000000 + 01000000 0 00000000 0000000c 08000000 0 00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <42000000 0 0 0 0 0 80000000>; + + /* This drives busses 0 to 0xf */ + bus-range = <0 f>; + + /* + * On Katmai, the following PCI-X interrupts signals + * have to be enabled via jumpers (only INTA is + * enabled per default): + * + * INTB: J3: 1-2 + * INTC: J2: 1-2 + * INTD: J1: 1-2 + */ + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + /* IDSEL 1 */ + 0800 0 0 1 &UIC1 14 8 + 0800 0 0 2 &UIC1 13 8 + 0800 0 0 3 &UIC1 12 8 + 0800 0 0 4 &UIC1 11 8 + >; + }; + + PCIE0: pciex@d00000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex"; + primary; + port = <0>; /* port number */ + reg = <d 00000000 20000000 /* Config space access */ + c 10000000 00001000>; /* Registers */ + dcr-reg = <100 020>; + sdr-base = <300>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <02000000 0 80000000 0000000e 00000000 0 80000000 + 01000000 0 00000000 0000000f 80000000 0 00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <42000000 0 0 0 0 0 80000000>; + + /* This drives busses 10 to 0x1f */ + bus-range = <10 1f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0000 0 0 7>; + interrupt-map = < + 0000 0 0 1 &UIC3 0 4 /* swizzled int A */ + 0000 0 0 2 &UIC3 1 4 /* swizzled int B */ + 0000 0 0 3 &UIC3 2 4 /* swizzled int C */ + 0000 0 0 4 &UIC3 3 4 /* swizzled int D */>; + }; + + PCIE1: pciex@d20000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex"; + primary; + port = <1>; /* port number */ + reg = <d 20000000 20000000 /* Config space access */ + c 10001000 00001000>; /* Registers */ + dcr-reg = <120 020>; + sdr-base = <340>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <02000000 0 80000000 0000000e 80000000 0 80000000 + 01000000 0 00000000 0000000f 80010000 0 00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <42000000 0 0 0 0 0 80000000>; + + /* This drives busses 10 to 0x1f */ + bus-range = <20 2f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0000 0 0 7>; + interrupt-map = < + 0000 0 0 1 &UIC3 4 4 /* swizzled int A */ + 0000 0 0 2 &UIC3 5 4 /* swizzled int B */ + 0000 0 0 3 &UIC3 6 4 /* swizzled int C */ + 0000 0 0 4 &UIC3 7 4 /* swizzled int D */>; + }; + + PCIE2: pciex@d40000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex"; + primary; + port = <2>; /* port number */ + reg = <d 40000000 20000000 /* Config space access */ + c 10002000 00001000>; /* Registers */ + dcr-reg = <140 020>; + sdr-base = <370>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <02000000 0 80000000 0000000f 00000000 0 80000000 + 01000000 0 00000000 0000000f 80020000 0 00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <42000000 0 0 0 0 0 80000000>; + + /* This drives busses 10 to 0x1f */ + bus-range = <30 3f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0000 0 0 7>; + interrupt-map = < + 0000 0 0 1 &UIC3 8 4 /* swizzled int A */ + 0000 0 0 2 &UIC3 9 4 /* swizzled int B */ + 0000 0 0 3 &UIC3 a 4 /* swizzled int C */ + 0000 0 0 4 &UIC3 b 4 /* swizzled int D */>; + }; + }; + + chosen { + linux,stdout-path = "/plb/opb/serial@10000200"; + }; +}; diff --git a/arch/powerpc/boot/dts/kilauea.dts b/arch/powerpc/boot/dts/kilauea.dts index c824e8f0645..67c7ea179a0 100644 --- a/arch/powerpc/boot/dts/kilauea.dts +++ b/arch/powerpc/boot/dts/kilauea.dts @@ -13,14 +13,22 @@ #size-cells = <1>; model = "amcc,kilauea"; compatible = "amcc,kilauea"; - dcr-parent = <&/cpus/PowerPC,405EX@0>; + dcr-parent = <&/cpus/cpu@0>; + + aliases { + ethernet0 = &EMAC0; + ethernet1 = &EMAC1; + serial0 = &UART0; + serial1 = &UART1; + }; cpus { #address-cells = <1>; #size-cells = <0>; - PowerPC,405EX@0 { + cpu@0 { device_type = "cpu"; + model = "PowerPC,405EX"; reg = <0>; clock-frequency = <0>; /* Filled in by U-Boot */ timebase-frequency = <0>; /* Filled in by U-Boot */ @@ -194,6 +202,7 @@ device_type = "rgmii-interface"; compatible = "ibm,rgmii-405ex", "ibm,rgmii"; reg = <ef600b00 104>; + has-mdio; }; EMAC0: ethernet@ef600900 { @@ -220,6 +229,8 @@ phy-map = <00000000>; rgmii-device = <&RGMII0>; rgmii-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; }; EMAC1: ethernet@ef600a00 { @@ -246,7 +257,91 @@ phy-map = <00000000>; rgmii-device = <&RGMII0>; rgmii-channel = <1>; + has-inverted-stacr-oc; + has-new-stacr-staopc; }; }; + + PCIE0: pciex@0a0000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex"; + primary; + port = <0>; /* port number */ + reg = <a0000000 20000000 /* Config space access */ + ef000000 00001000>; /* Registers */ + dcr-reg = <040 020>; + sdr-base = <400>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <02000000 0 80000000 90000000 0 08000000 + 01000000 0 00000000 e0000000 0 00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <42000000 0 0 0 0 80000000>; + + /* This drives busses 0x00 to 0x3f */ + bus-range = <00 3f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0000 0 0 7>; + interrupt-map = < + 0000 0 0 1 &UIC2 0 4 /* swizzled int A */ + 0000 0 0 2 &UIC2 1 4 /* swizzled int B */ + 0000 0 0 3 &UIC2 2 4 /* swizzled int C */ + 0000 0 0 4 &UIC2 3 4 /* swizzled int D */>; + }; + + PCIE1: pciex@0c0000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex"; + primary; + port = <1>; /* port number */ + reg = <c0000000 20000000 /* Config space access */ + ef001000 00001000>; /* Registers */ + dcr-reg = <060 020>; + sdr-base = <440>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <02000000 0 80000000 98000000 0 08000000 + 01000000 0 00000000 e0010000 0 00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <42000000 0 0 0 0 80000000>; + + /* This drives busses 0x40 to 0x7f */ + bus-range = <40 7f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0000 0 0 7>; + interrupt-map = < + 0000 0 0 1 &UIC2 b 4 /* swizzled int A */ + 0000 0 0 2 &UIC2 c 4 /* swizzled int B */ + 0000 0 0 3 &UIC2 d 4 /* swizzled int C */ + 0000 0 0 4 &UIC2 e 4 /* swizzled int D */>; + }; }; }; diff --git a/arch/powerpc/boot/dts/kuroboxHD.dts b/arch/powerpc/boot/dts/kuroboxHD.dts index ec71ab819fe..44695885451 100644 --- a/arch/powerpc/boot/dts/kuroboxHD.dts +++ b/arch/powerpc/boot/dts/kuroboxHD.dts @@ -23,6 +23,12 @@ XXXX add flash parts, rtc, ?? #address-cells = <1>; #size-cells = <1>; + aliases { + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -60,7 +66,7 @@ XXXX add flash parts, rtc, ?? i2c@80003000 { #address-cells = <1>; #size-cells = <0>; - device_type = "i2c"; + cell-index = <0>; compatible = "fsl-i2c"; reg = <80003000 1000>; interrupts = <5 2>; @@ -73,7 +79,8 @@ XXXX add flash parts, rtc, ?? }; }; - serial@80004500 { + serial0: serial@80004500 { + cell-index = <0>; device_type = "serial"; compatible = "ns16550"; reg = <80004500 8>; @@ -83,7 +90,8 @@ XXXX add flash parts, rtc, ?? interrupt-parent = <&mpic>; }; - serial@80004600 { + serial1: serial@80004600 { + cell-index = <1>; device_type = "serial"; compatible = "ns16550"; reg = <80004600 8>; @@ -102,7 +110,7 @@ XXXX add flash parts, rtc, ?? reg = <80040000 40000>; }; - pci@fec00000 { + pci0: pci@fec00000 { #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; diff --git a/arch/powerpc/boot/dts/kuroboxHG.dts b/arch/powerpc/boot/dts/kuroboxHG.dts index 32ecd231992..8443c85b7b3 100644 --- a/arch/powerpc/boot/dts/kuroboxHG.dts +++ b/arch/powerpc/boot/dts/kuroboxHG.dts @@ -23,6 +23,12 @@ XXXX add flash parts, rtc, ?? #address-cells = <1>; #size-cells = <1>; + aliases { + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -60,7 +66,7 @@ XXXX add flash parts, rtc, ?? i2c@80003000 { #address-cells = <1>; #size-cells = <0>; - device_type = "i2c"; + cell-index = <0>; compatible = "fsl-i2c"; reg = <80003000 1000>; interrupts = <5 2>; @@ -73,7 +79,8 @@ XXXX add flash parts, rtc, ?? }; }; - serial@80004500 { + serial0: serial@80004500 { + cell-index = <0>; device_type = "serial"; compatible = "ns16550"; reg = <80004500 8>; @@ -83,7 +90,8 @@ XXXX add flash parts, rtc, ?? interrupt-parent = <&mpic>; }; - serial@80004600 { + serial1: serial@80004600 { + cell-index = <1>; device_type = "serial"; compatible = "ns16550"; reg = <80004600 8>; @@ -102,7 +110,7 @@ XXXX add flash parts, rtc, ?? reg = <80040000 40000>; }; - pci@fec00000 { + pci0: pci@fec00000 { #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; diff --git a/arch/powerpc/boot/dts/lite5200.dts b/arch/powerpc/boot/dts/lite5200.dts index 6731763f028..0d701c1bf53 100644 --- a/arch/powerpc/boot/dts/lite5200.dts +++ b/arch/powerpc/boot/dts/lite5200.dts @@ -10,16 +10,9 @@ * option) any later version. */ -/* - * WARNING: Do not depend on this tree layout remaining static just yet. - * The MPC5200 device tree conventions are still in flux - * Keep an eye on the linuxppc-dev mailing list for more details - */ - / { model = "fsl,lite5200"; - // revision = "1.0"; - compatible = "fsl,lite5200","generic-mpc5200"; + compatible = "fsl,lite5200"; #address-cells = <1>; #size-cells = <1>; @@ -46,30 +39,29 @@ }; soc5200@f0000000 { - model = "fsl,mpc5200"; - compatible = "mpc5200"; - revision = ""; // from bootloader - device_type = "soc"; + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc5200-immr"; ranges = <0 f0000000 0000c000>; reg = <f0000000 00000100>; bus-frequency = <0>; // from bootloader system-frequency = <0>; // from bootloader cdm@200 { - compatible = "mpc5200-cdm"; + compatible = "fsl,mpc5200-cdm"; reg = <200 38>; }; - mpc5200_pic: pic@500 { + mpc5200_pic: interrupt-controller@500 { // 5200 interrupts are encoded into two levels; interrupt-controller; #interrupt-cells = <3>; device_type = "interrupt-controller"; - compatible = "mpc5200-pic"; + compatible = "fsl,mpc5200-pic"; reg = <500 80>; }; - gpt@600 { // General Purpose Timer + timer@600 { // General Purpose Timer compatible = "fsl,mpc5200-gpt"; cell-index = <0>; reg = <600 10>; @@ -78,7 +70,7 @@ fsl,has-wdt; }; - gpt@610 { // General Purpose Timer + timer@610 { // General Purpose Timer compatible = "fsl,mpc5200-gpt"; cell-index = <1>; reg = <610 10>; @@ -86,7 +78,7 @@ interrupt-parent = <&mpc5200_pic>; }; - gpt@620 { // General Purpose Timer + timer@620 { // General Purpose Timer compatible = "fsl,mpc5200-gpt"; cell-index = <2>; reg = <620 10>; @@ -94,7 +86,7 @@ interrupt-parent = <&mpc5200_pic>; }; - gpt@630 { // General Purpose Timer + timer@630 { // General Purpose Timer compatible = "fsl,mpc5200-gpt"; cell-index = <3>; reg = <630 10>; @@ -102,7 +94,7 @@ interrupt-parent = <&mpc5200_pic>; }; - gpt@640 { // General Purpose Timer + timer@640 { // General Purpose Timer compatible = "fsl,mpc5200-gpt"; cell-index = <4>; reg = <640 10>; @@ -110,7 +102,7 @@ interrupt-parent = <&mpc5200_pic>; }; - gpt@650 { // General Purpose Timer + timer@650 { // General Purpose Timer compatible = "fsl,mpc5200-gpt"; cell-index = <5>; reg = <650 10>; @@ -118,7 +110,7 @@ interrupt-parent = <&mpc5200_pic>; }; - gpt@660 { // General Purpose Timer + timer@660 { // General Purpose Timer compatible = "fsl,mpc5200-gpt"; cell-index = <6>; reg = <660 10>; @@ -126,7 +118,7 @@ interrupt-parent = <&mpc5200_pic>; }; - gpt@670 { // General Purpose Timer + timer@670 { // General Purpose Timer compatible = "fsl,mpc5200-gpt"; cell-index = <7>; reg = <670 10>; @@ -135,25 +127,23 @@ }; rtc@800 { // Real time clock - compatible = "mpc5200-rtc"; + compatible = "fsl,mpc5200-rtc"; device_type = "rtc"; reg = <800 100>; interrupts = <1 5 0 1 6 0>; interrupt-parent = <&mpc5200_pic>; }; - mscan@900 { - device_type = "mscan"; - compatible = "mpc5200-mscan"; + can@900 { + compatible = "fsl,mpc5200-mscan"; cell-index = <0>; interrupts = <2 11 0>; interrupt-parent = <&mpc5200_pic>; reg = <900 80>; }; - mscan@980 { - device_type = "mscan"; - compatible = "mpc5200-mscan"; + can@980 { + compatible = "fsl,mpc5200-mscan"; cell-index = <1>; interrupts = <2 12 0>; interrupt-parent = <&mpc5200_pic>; @@ -161,38 +151,36 @@ }; gpio@b00 { - compatible = "mpc5200-gpio"; + compatible = "fsl,mpc5200-gpio"; reg = <b00 40>; interrupts = <1 7 0>; interrupt-parent = <&mpc5200_pic>; }; - gpio-wkup@c00 { - compatible = "mpc5200-gpio-wkup"; + gpio@c00 { + compatible = "fsl,mpc5200-gpio-wkup"; reg = <c00 40>; interrupts = <1 8 0 0 3 0>; interrupt-parent = <&mpc5200_pic>; }; spi@f00 { - device_type = "spi"; - compatible = "mpc5200-spi"; + compatible = "fsl,mpc5200-spi"; reg = <f00 20>; interrupts = <2 d 0 2 e 0>; interrupt-parent = <&mpc5200_pic>; }; usb@1000 { - device_type = "usb-ohci-be"; - compatible = "mpc5200-ohci","ohci-be"; + compatible = "fsl,mpc5200-ohci","ohci-be"; reg = <1000 ff>; interrupts = <2 6 0>; interrupt-parent = <&mpc5200_pic>; }; - bestcomm@1200 { + dma-controller@1200 { device_type = "dma-controller"; - compatible = "mpc5200-bestcomm"; + compatible = "fsl,mpc5200-bestcomm"; reg = <1200 80>; interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 3 4 0 3 5 0 3 6 0 3 7 0 @@ -202,13 +190,13 @@ }; xlb@1f00 { - compatible = "mpc5200-xlb"; + compatible = "fsl,mpc5200-xlb"; reg = <1f00 100>; }; serial@2000 { // PSC1 device_type = "serial"; - compatible = "mpc5200-psc-uart"; + compatible = "fsl,mpc5200-psc-uart"; port-number = <0>; // Logical port assignment cell-index = <0>; reg = <2000 100>; @@ -218,8 +206,7 @@ // PSC2 in ac97 mode example //ac97@2200 { // PSC2 - // device_type = "sound"; - // compatible = "mpc5200-psc-ac97"; + // compatible = "fsl,mpc5200-psc-ac97"; // cell-index = <1>; // reg = <2200 100>; // interrupts = <2 2 0>; @@ -228,8 +215,7 @@ // PSC3 in CODEC mode example //i2s@2400 { // PSC3 - // device_type = "sound"; - // compatible = "mpc5200-psc-i2s"; + // compatible = "fsl,mpc5200-psc-i2s"; // cell-index = <2>; // reg = <2400 100>; // interrupts = <2 3 0>; @@ -239,7 +225,7 @@ // PSC4 in uart mode example //serial@2600 { // PSC4 // device_type = "serial"; - // compatible = "mpc5200-psc-uart"; + // compatible = "fsl,mpc5200-psc-uart"; // cell-index = <3>; // reg = <2600 100>; // interrupts = <2 b 0>; @@ -249,7 +235,7 @@ // PSC5 in uart mode example //serial@2800 { // PSC5 // device_type = "serial"; - // compatible = "mpc5200-psc-uart"; + // compatible = "fsl,mpc5200-psc-uart"; // cell-index = <4>; // reg = <2800 100>; // interrupts = <2 c 0>; @@ -258,8 +244,7 @@ // PSC6 in spi mode example //spi@2c00 { // PSC6 - // device_type = "spi"; - // compatible = "mpc5200-psc-spi"; + // compatible = "fsl,mpc5200-psc-spi"; // cell-index = <5>; // reg = <2c00 100>; // interrupts = <2 4 0>; @@ -268,24 +253,25 @@ ethernet@3000 { device_type = "network"; - compatible = "mpc5200-fec"; + compatible = "fsl,mpc5200-fec"; reg = <3000 800>; - mac-address = [ 02 03 04 05 06 07 ]; // Bad! + local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <2 5 0>; interrupt-parent = <&mpc5200_pic>; }; ata@3a00 { device_type = "ata"; - compatible = "mpc5200-ata"; + compatible = "fsl,mpc5200-ata"; reg = <3a00 100>; interrupts = <2 7 0>; interrupt-parent = <&mpc5200_pic>; }; i2c@3d00 { - device_type = "i2c"; - compatible = "mpc5200-i2c","fsl-i2c"; + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200-i2c","fsl-i2c"; cell-index = <0>; reg = <3d00 40>; interrupts = <2 f 0>; @@ -294,8 +280,9 @@ }; i2c@3d40 { - device_type = "i2c"; - compatible = "mpc5200-i2c","fsl-i2c"; + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200-i2c","fsl-i2c"; cell-index = <1>; reg = <3d40 40>; interrupts = <2 10 0>; @@ -303,8 +290,7 @@ fsl5200-clocking; }; sram@8000 { - device_type = "sram"; - compatible = "mpc5200-sram","sram"; + compatible = "fsl,mpc5200-sram","sram"; reg = <8000 4000>; }; }; @@ -314,7 +300,7 @@ #size-cells = <2>; #address-cells = <3>; device_type = "pci"; - compatible = "mpc5200-pci"; + compatible = "fsl,mpc5200-pci"; reg = <f0000d00 100>; interrupt-map-mask = <f800 0 0 7>; interrupt-map = <c000 0 0 1 &mpc5200_pic 0 0 3 diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts index b540388c608..571ba02acca 100644 --- a/arch/powerpc/boot/dts/lite5200b.dts +++ b/arch/powerpc/boot/dts/lite5200b.dts @@ -18,8 +18,7 @@ / { model = "fsl,lite5200b"; - // revision = "1.0"; - compatible = "fsl,lite5200b","generic-mpc5200"; + compatible = "fsl,lite5200b"; #address-cells = <1>; #size-cells = <1>; @@ -46,30 +45,29 @@ }; soc5200@f0000000 { - model = "fsl,mpc5200b"; - compatible = "mpc5200"; - revision = ""; // from bootloader - device_type = "soc"; + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc5200b-immr"; ranges = <0 f0000000 0000c000>; reg = <f0000000 00000100>; bus-frequency = <0>; // from bootloader system-frequency = <0>; // from bootloader cdm@200 { - compatible = "mpc5200b-cdm","mpc5200-cdm"; + compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm"; reg = <200 38>; }; - mpc5200_pic: pic@500 { + mpc5200_pic: interrupt-controller@500 { // 5200 interrupts are encoded into two levels; interrupt-controller; #interrupt-cells = <3>; device_type = "interrupt-controller"; - compatible = "mpc5200b-pic","mpc5200-pic"; + compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic"; reg = <500 80>; }; - gpt@600 { // General Purpose Timer + timer@600 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; cell-index = <0>; reg = <600 10>; @@ -78,7 +76,7 @@ fsl,has-wdt; }; - gpt@610 { // General Purpose Timer + timer@610 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; cell-index = <1>; reg = <610 10>; @@ -86,7 +84,7 @@ interrupt-parent = <&mpc5200_pic>; }; - gpt@620 { // General Purpose Timer + timer@620 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; cell-index = <2>; reg = <620 10>; @@ -94,7 +92,7 @@ interrupt-parent = <&mpc5200_pic>; }; - gpt@630 { // General Purpose Timer + timer@630 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; cell-index = <3>; reg = <630 10>; @@ -102,7 +100,7 @@ interrupt-parent = <&mpc5200_pic>; }; - gpt@640 { // General Purpose Timer + timer@640 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; cell-index = <4>; reg = <640 10>; @@ -110,7 +108,7 @@ interrupt-parent = <&mpc5200_pic>; }; - gpt@650 { // General Purpose Timer + timer@650 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; cell-index = <5>; reg = <650 10>; @@ -118,7 +116,7 @@ interrupt-parent = <&mpc5200_pic>; }; - gpt@660 { // General Purpose Timer + timer@660 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; cell-index = <6>; reg = <660 10>; @@ -126,7 +124,7 @@ interrupt-parent = <&mpc5200_pic>; }; - gpt@670 { // General Purpose Timer + timer@670 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; cell-index = <7>; reg = <670 10>; @@ -135,25 +133,23 @@ }; rtc@800 { // Real time clock - compatible = "mpc5200b-rtc","mpc5200-rtc"; + compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc"; device_type = "rtc"; reg = <800 100>; interrupts = <1 5 0 1 6 0>; interrupt-parent = <&mpc5200_pic>; }; - mscan@900 { - device_type = "mscan"; - compatible = "mpc5200b-mscan","mpc5200-mscan"; + can@900 { + compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; cell-index = <0>; interrupts = <2 11 0>; interrupt-parent = <&mpc5200_pic>; reg = <900 80>; }; - mscan@980 { - device_type = "mscan"; - compatible = "mpc5200b-mscan","mpc5200-mscan"; + can@980 { + compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; cell-index = <1>; interrupts = <2 12 0>; interrupt-parent = <&mpc5200_pic>; @@ -161,38 +157,36 @@ }; gpio@b00 { - compatible = "mpc5200b-gpio","mpc5200-gpio"; + compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio"; reg = <b00 40>; interrupts = <1 7 0>; interrupt-parent = <&mpc5200_pic>; }; - gpio-wkup@c00 { - compatible = "mpc5200b-gpio-wkup","mpc5200-gpio-wkup"; + gpio@c00 { + compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup"; reg = <c00 40>; interrupts = <1 8 0 0 3 0>; interrupt-parent = <&mpc5200_pic>; }; spi@f00 { - device_type = "spi"; - compatible = "mpc5200b-spi","mpc5200-spi"; + compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; reg = <f00 20>; interrupts = <2 d 0 2 e 0>; interrupt-parent = <&mpc5200_pic>; }; usb@1000 { - device_type = "usb-ohci-be"; - compatible = "mpc5200b-ohci","mpc5200-ohci","ohci-be"; + compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be"; reg = <1000 ff>; interrupts = <2 6 0>; interrupt-parent = <&mpc5200_pic>; }; - bestcomm@1200 { + dma-controller@1200 { device_type = "dma-controller"; - compatible = "mpc5200b-bestcomm","mpc5200-bestcomm"; + compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm"; reg = <1200 80>; interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 3 4 0 3 5 0 3 6 0 3 7 0 @@ -202,13 +196,13 @@ }; xlb@1f00 { - compatible = "mpc5200b-xlb","mpc5200-xlb"; + compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb"; reg = <1f00 100>; }; serial@2000 { // PSC1 device_type = "serial"; - compatible = "mpc5200b-psc-uart","mpc5200-psc-uart"; + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; port-number = <0>; // Logical port assignment cell-index = <0>; reg = <2000 100>; @@ -218,8 +212,7 @@ // PSC2 in ac97 mode example //ac97@2200 { // PSC2 - // device_type = "sound"; - // compatible = "mpc5200b-psc-ac97","mpc5200-psc-ac97"; + // compatible = "fsl,mpc5200b-psc-ac97","fsl,mpc5200-psc-ac97"; // cell-index = <1>; // reg = <2200 100>; // interrupts = <2 2 0>; @@ -228,8 +221,7 @@ // PSC3 in CODEC mode example //i2s@2400 { // PSC3 - // device_type = "sound"; - // compatible = "mpc5200b-psc-i2s"; //not 5200 compatible + // compatible = "fsl,mpc5200b-psc-i2s"; //not 5200 compatible // cell-index = <2>; // reg = <2400 100>; // interrupts = <2 3 0>; @@ -239,7 +231,7 @@ // PSC4 in uart mode example //serial@2600 { // PSC4 // device_type = "serial"; - // compatible = "mpc5200b-psc-uart","mpc5200-psc-uart"; + // compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; // cell-index = <3>; // reg = <2600 100>; // interrupts = <2 b 0>; @@ -249,7 +241,7 @@ // PSC5 in uart mode example //serial@2800 { // PSC5 // device_type = "serial"; - // compatible = "mpc5200b-psc-uart","mpc5200-psc-uart"; + // compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; // cell-index = <4>; // reg = <2800 100>; // interrupts = <2 c 0>; @@ -258,8 +250,7 @@ // PSC6 in spi mode example //spi@2c00 { // PSC6 - // device_type = "spi"; - // compatible = "mpc5200b-psc-spi","mpc5200-psc-spi"; + // compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi"; // cell-index = <5>; // reg = <2c00 100>; // interrupts = <2 4 0>; @@ -268,9 +259,9 @@ ethernet@3000 { device_type = "network"; - compatible = "mpc5200b-fec","mpc5200-fec"; + compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; reg = <3000 400>; - mac-address = [ 02 03 04 05 06 07 ]; // Bad! + local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <2 5 0>; interrupt-parent = <&mpc5200_pic>; phy-handle = <&phy0>; @@ -279,8 +270,7 @@ mdio@3000 { #address-cells = <1>; #size-cells = <0>; - device_type = "mdio"; - compatible = "mpc5200b-fec-phy"; + compatible = "fsl,mpc5200b-mdio"; reg = <3000 400>; // fec range, since we need to setup fec interrupts interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. interrupt-parent = <&mpc5200_pic>; @@ -293,15 +283,16 @@ ata@3a00 { device_type = "ata"; - compatible = "mpc5200b-ata","mpc5200-ata"; + compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata"; reg = <3a00 100>; interrupts = <2 7 0>; interrupt-parent = <&mpc5200_pic>; }; i2c@3d00 { - device_type = "i2c"; - compatible = "mpc5200b-i2c","mpc5200-i2c","fsl-i2c"; + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; cell-index = <0>; reg = <3d00 40>; interrupts = <2 f 0>; @@ -310,8 +301,9 @@ }; i2c@3d40 { - device_type = "i2c"; - compatible = "mpc5200b-i2c","mpc5200-i2c","fsl-i2c"; + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; cell-index = <1>; reg = <3d40 40>; interrupts = <2 10 0>; @@ -319,8 +311,7 @@ fsl5200-clocking; }; sram@8000 { - device_type = "sram"; - compatible = "mpc5200b-sram","mpc5200-sram","sram"; + compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram","sram"; reg = <8000 4000>; }; }; @@ -330,7 +321,7 @@ #size-cells = <2>; #address-cells = <3>; device_type = "pci"; - compatible = "mpc5200b-pci","mpc5200-pci"; + compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci"; reg = <f0000d00 100>; interrupt-map-mask = <f800 0 0 7>; interrupt-map = <c000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot diff --git a/arch/powerpc/boot/dts/makalu.dts b/arch/powerpc/boot/dts/makalu.dts new file mode 100644 index 00000000000..bdd70e4596a --- /dev/null +++ b/arch/powerpc/boot/dts/makalu.dts @@ -0,0 +1,347 @@ +/* + * Device Tree Source for AMCC Makalu (405EX) + * + * Copyright 2007 DENX Software Engineering, Stefan Roese <sr@denx.de> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "amcc,makalu"; + compatible = "amcc,makalu"; + dcr-parent = <&/cpus/cpu@0>; + + aliases { + ethernet0 = &EMAC0; + ethernet1 = &EMAC1; + serial0 = &UART0; + serial1 = &UART1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,405EX"; + reg = <0>; + clock-frequency = <0>; /* Filled in by U-Boot */ + timebase-frequency = <0>; /* Filled in by U-Boot */ + i-cache-line-size = <20>; + d-cache-line-size = <20>; + i-cache-size = <4000>; /* 16 kB */ + d-cache-size = <4000>; /* 16 kB */ + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0>; /* Filled in by U-Boot */ + }; + + UIC0: interrupt-controller { + compatible = "ibm,uic-405ex", "ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0c0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-405ex","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0d0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <1e 4 1f 4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC2: interrupt-controller2 { + compatible = "ibm,uic-405ex","ibm,uic"; + interrupt-controller; + cell-index = <2>; + dcr-reg = <0e0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <1c 4 1d 4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + plb { + compatible = "ibm,plb-405ex", "ibm,plb4"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by U-Boot */ + + SDRAM0: memory-controller { + compatible = "ibm,sdram-405ex"; + dcr-reg = <010 2>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-405ex", "ibm,mcmal2"; + dcr-reg = <180 62>; + num-tx-chans = <2>; + num-rx-chans = <2>; + interrupt-parent = <&MAL0>; + interrupts = <0 1 2 3 4>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*TXEOB*/ 0 &UIC0 a 4 + /*RXEOB*/ 1 &UIC0 b 4 + /*SERR*/ 2 &UIC1 0 4 + /*TXDE*/ 3 &UIC1 1 4 + /*RXDE*/ 4 &UIC1 2 4>; + interrupt-map-mask = <ffffffff>; + }; + + POB0: opb { + compatible = "ibm,opb-405ex", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <80000000 80000000 10000000 + ef600000 ef600000 a00000 + f0000000 f0000000 10000000>; + dcr-reg = <0a0 5>; + clock-frequency = <0>; /* Filled in by U-Boot */ + + EBC0: ebc { + compatible = "ibm,ebc-405ex", "ibm,ebc"; + dcr-reg = <012 2>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by U-Boot */ + /* ranges property is supplied by U-Boot */ + interrupts = <5 1>; + interrupt-parent = <&UIC1>; + + nor_flash@0,0 { + compatible = "amd,s29gl512n", "cfi-flash"; + bank-width = <2>; + reg = <0 000000 4000000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "kernel"; + reg = <0 200000>; + }; + partition@200000 { + label = "root"; + reg = <200000 200000>; + }; + partition@400000 { + label = "user"; + reg = <400000 3b60000>; + }; + partition@3f60000 { + label = "env"; + reg = <3f60000 40000>; + }; + partition@3fa0000 { + label = "u-boot"; + reg = <3fa0000 60000>; + }; + }; + }; + + UART0: serial@ef600200 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600200 8>; + virtual-reg = <ef600200>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <1a 4>; + }; + + UART1: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600300 8>; + virtual-reg = <ef600300>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <1 4>; + }; + + IIC0: i2c@ef600400 { + device_type = "i2c"; + compatible = "ibm,iic-405ex", "ibm,iic"; + reg = <ef600400 14>; + interrupt-parent = <&UIC0>; + interrupts = <2 4>; + }; + + IIC1: i2c@ef600500 { + device_type = "i2c"; + compatible = "ibm,iic-405ex", "ibm,iic"; + reg = <ef600500 14>; + interrupt-parent = <&UIC0>; + interrupts = <7 4>; + }; + + + RGMII0: emac-rgmii@ef600b00 { + device_type = "rgmii-interface"; + compatible = "ibm,rgmii-405ex", "ibm,rgmii"; + reg = <ef600b00 104>; + has-mdio; + }; + + EMAC0: ethernet@ef600900 { + linux,network-index = <0>; + device_type = "network"; + compatible = "ibm,emac-405ex", "ibm,emac4"; + interrupt-parent = <&EMAC0>; + interrupts = <0 1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0 &UIC0 18 4 + /*Wake*/ 1 &UIC1 1d 4>; + reg = <ef600900 70>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <5dc>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rgmii"; + phy-map = <0000003f>; /* Start at 6 */ + rgmii-device = <&RGMII0>; + rgmii-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + + EMAC1: ethernet@ef600a00 { + linux,network-index = <1>; + device_type = "network"; + compatible = "ibm,emac-405ex", "ibm,emac4"; + interrupt-parent = <&EMAC1>; + interrupts = <0 1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0 &UIC0 19 4 + /*Wake*/ 1 &UIC1 1f 4>; + reg = <ef600a00 70>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <1>; + mal-rx-channel = <1>; + cell-index = <1>; + max-frame-size = <5dc>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rgmii"; + phy-map = <00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <1>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + }; + + PCIE0: pciex@0a0000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex"; + primary; + port = <0>; /* port number */ + reg = <a0000000 20000000 /* Config space access */ + ef000000 00001000>; /* Registers */ + dcr-reg = <040 020>; + sdr-base = <400>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <02000000 0 80000000 90000000 0 08000000 + 01000000 0 00000000 e0000000 0 00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <42000000 0 0 0 0 80000000>; + + /* This drives busses 0x00 to 0x3f */ + bus-range = <00 3f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0000 0 0 7>; + interrupt-map = < + 0000 0 0 1 &UIC2 0 4 /* swizzled int A */ + 0000 0 0 2 &UIC2 1 4 /* swizzled int B */ + 0000 0 0 3 &UIC2 2 4 /* swizzled int C */ + 0000 0 0 4 &UIC2 3 4 /* swizzled int D */>; + }; + + PCIE1: pciex@0c0000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex"; + primary; + port = <1>; /* port number */ + reg = <c0000000 20000000 /* Config space access */ + ef001000 00001000>; /* Registers */ + dcr-reg = <060 020>; + sdr-base = <440>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <02000000 0 80000000 98000000 0 08000000 + 01000000 0 00000000 e0010000 0 00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <42000000 0 0 0 0 80000000>; + + /* This drives busses 0x40 to 0x7f */ + bus-range = <40 7f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0000 0 0 7>; + interrupt-map = < + 0000 0 0 1 &UIC2 b 4 /* swizzled int A */ + 0000 0 0 2 &UIC2 c 4 /* swizzled int B */ + 0000 0 0 3 &UIC2 d 4 /* swizzled int C */ + 0000 0 0 4 &UIC2 e 4 /* swizzled int D */>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/motionpro.dts b/arch/powerpc/boot/dts/motionpro.dts new file mode 100644 index 00000000000..76951ab038e --- /dev/null +++ b/arch/powerpc/boot/dts/motionpro.dts @@ -0,0 +1,301 @@ +/* + * Motion-PRO board Device Tree Source + * + * Copyright (C) 2007 Semihalf + * Marian Balakowicz <m8@semihalf.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/ { + model = "promess,motionpro"; + compatible = "promess,motionpro"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,5200@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; + i-cache-line-size = <20>; + d-cache-size = <4000>; // L1, 16K + i-cache-size = <4000>; // L1, 16K + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + }; + }; + + memory { + device_type = "memory"; + reg = <00000000 04000000>; // 64MB + }; + + soc5200@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc5200b-immr"; + ranges = <0 f0000000 0000c000>; + reg = <f0000000 00000100>; + bus-frequency = <0>; // from bootloader + system-frequency = <0>; // from bootloader + + cdm@200 { + compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm"; + reg = <200 38>; + }; + + mpc5200_pic: interrupt-controller@500 { + // 5200 interrupts are encoded into two levels; + interrupt-controller; + #interrupt-cells = <3>; + compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic"; + reg = <500 80>; + }; + + timer@600 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <600 10>; + interrupts = <1 9 0>; + interrupt-parent = <&mpc5200_pic>; + fsl,has-wdt; + }; + + timer@610 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <610 10>; + interrupts = <1 a 0>; + interrupt-parent = <&mpc5200_pic>; + }; + + timer@620 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <620 10>; + interrupts = <1 b 0>; + interrupt-parent = <&mpc5200_pic>; + }; + + timer@630 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <630 10>; + interrupts = <1 c 0>; + interrupt-parent = <&mpc5200_pic>; + }; + + timer@640 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <640 10>; + interrupts = <1 d 0>; + interrupt-parent = <&mpc5200_pic>; + }; + + timer@650 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <650 10>; + interrupts = <1 e 0>; + interrupt-parent = <&mpc5200_pic>; + }; + + motionpro-led@660 { // Motion-PRO status LED + compatible = "promess,motionpro-led"; + label = "motionpro-statusled"; + reg = <660 10>; + interrupts = <1 f 0>; + interrupt-parent = <&mpc5200_pic>; + blink-delay = <64>; // 100 msec + }; + + motionpro-led@670 { // Motion-PRO ready LED + compatible = "promess,motionpro-led"; + label = "motionpro-readyled"; + reg = <670 10>; + interrupts = <1 10 0>; + interrupt-parent = <&mpc5200_pic>; + }; + + rtc@800 { // Real time clock + compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc"; + reg = <800 100>; + interrupts = <1 5 0 1 6 0>; + interrupt-parent = <&mpc5200_pic>; + }; + + mscan@980 { + compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; + interrupts = <2 12 0>; + interrupt-parent = <&mpc5200_pic>; + reg = <980 80>; + }; + + gpio@b00 { + compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio"; + reg = <b00 40>; + interrupts = <1 7 0>; + interrupt-parent = <&mpc5200_pic>; + }; + + gpio@c00 { + compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup"; + reg = <c00 40>; + interrupts = <1 8 0 0 3 0>; + interrupt-parent = <&mpc5200_pic>; + }; + + + spi@f00 { + compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; + reg = <f00 20>; + interrupts = <2 d 0 2 e 0>; + interrupt-parent = <&mpc5200_pic>; + }; + + usb@1000 { + compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be"; + reg = <1000 ff>; + interrupts = <2 6 0>; + interrupt-parent = <&mpc5200_pic>; + }; + + dma-controller@1200 { + compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm"; + reg = <1200 80>; + interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 + 3 4 0 3 5 0 3 6 0 3 7 0 + 3 8 0 3 9 0 3 a 0 3 b 0 + 3 c 0 3 d 0 3 e 0 3 f 0>; + interrupt-parent = <&mpc5200_pic>; + }; + + xlb@1f00 { + compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb"; + reg = <1f00 100>; + }; + + serial@2000 { // PSC1 + device_type = "serial"; + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + port-number = <0>; // Logical port assignment + reg = <2000 100>; + interrupts = <2 1 0>; + interrupt-parent = <&mpc5200_pic>; + }; + + // PSC2 in spi master mode + spi@2200 { // PSC2 + compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi"; + cell-index = <1>; + reg = <2200 100>; + interrupts = <2 2 0>; + interrupt-parent = <&mpc5200_pic>; + }; + + // PSC5 in uart mode + serial@2800 { // PSC5 + device_type = "serial"; + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + port-number = <4>; // Logical port assignment + reg = <2800 100>; + interrupts = <2 c 0>; + interrupt-parent = <&mpc5200_pic>; + }; + + ethernet@3000 { + device_type = "network"; + compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; + reg = <3000 800>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <2 5 0>; + interrupt-parent = <&mpc5200_pic>; + }; + + ata@3a00 { + compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata"; + reg = <3a00 100>; + interrupts = <2 7 0>; + interrupt-parent = <&mpc5200_pic>; + }; + + i2c@3d40 { + compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; + reg = <3d40 40>; + interrupts = <2 10 0>; + interrupt-parent = <&mpc5200_pic>; + fsl5200-clocking; + }; + + sram@8000 { + compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram"; + reg = <8000 4000>; + }; + }; + + lpb { + compatible = "fsl,lpb"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <1 0 50000000 00010000 + 2 0 50010000 00010000 + 3 0 50020000 00010000>; + + // 8-bit DualPort SRAM on LocalPlus Bus CS1 + kollmorgen@1,0 { + compatible = "promess,motionpro-kollmorgen"; + reg = <1 0 10000>; + interrupts = <1 1 0>; + interrupt-parent = <&mpc5200_pic>; + }; + + // 8-bit board CPLD on LocalPlus Bus CS2 + cpld@2,0 { + compatible = "promess,motionpro-cpld"; + reg = <2 0 10000>; + }; + + // 8-bit custom Anybus Module on LocalPlus Bus CS3 + anybus@3,0 { + compatible = "promess,motionpro-anybus"; + reg = <3 0 10000>; + }; + pro_module_general@3,0 { + compatible = "promess,pro_module_general"; + reg = <3 0 3>; + }; + pro_module_dio@3,800 { + compatible = "promess,pro_module_dio"; + reg = <3 800 2>; + }; + }; + + pci@f0000d00 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci"; + reg = <f0000d00 100>; + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = <c000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot + c000 0 0 2 &mpc5200_pic 1 1 3 + c000 0 0 3 &mpc5200_pic 1 2 3 + c000 0 0 4 &mpc5200_pic 1 3 3 + + c800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot + c800 0 0 2 &mpc5200_pic 1 2 3 + c800 0 0 3 &mpc5200_pic 1 3 3 + c800 0 0 4 &mpc5200_pic 0 0 3>; + clock-frequency = <0>; // From boot loader + interrupts = <2 8 0 2 9 0 2 a 0>; + interrupt-parent = <&mpc5200_pic>; + bus-range = <0 0>; + ranges = <42000000 0 80000000 80000000 0 20000000 + 02000000 0 a0000000 a0000000 0 10000000 + 01000000 0 00000000 b0000000 0 01000000>; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts index 9e7eba97326..2d6653fe72f 100644 --- a/arch/powerpc/boot/dts/mpc8313erdb.dts +++ b/arch/powerpc/boot/dts/mpc8313erdb.dts @@ -9,23 +9,33 @@ * option) any later version. */ +/dts-v1/; + / { model = "MPC8313ERDB"; compatible = "MPC8313ERDB", "MPC831xRDB", "MPC83xxRDB"; #address-cells = <1>; #size-cells = <1>; + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + cpus { #address-cells = <1>; #size-cells = <0>; PowerPC,8313@0 { device_type = "cpu"; - reg = <0>; - d-cache-line-size = <20>; // 32 bytes - i-cache-line-size = <20>; // 32 bytes - d-cache-size = <4000>; // L1, 16K - i-cache-size = <4000>; // L1, 16K + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <16384>; + i-cache-size = <16384>; timebase-frequency = <0>; // from bootloader bus-frequency = <0>; // from bootloader clock-frequency = <0>; // from bootloader @@ -34,134 +44,188 @@ memory { device_type = "memory"; - reg = <00000000 08000000>; // 128MB at 0 + reg = <0x00000000 0x08000000>; // 128MB at 0 + }; + + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8313-elbc", "fsl,elbc", "simple-bus"; + reg = <0xe0005000 0x1000>; + interrupts = <77 0x8>; + interrupt-parent = <&ipic>; + + // CS0 and CS1 are swapped when + // booting from nand, but the + // addresses are the same. + ranges = <0x0 0x0 0xfe000000 0x00800000 + 0x1 0x0 0xe2800000 0x00008000 + 0x2 0x0 0xf0000000 0x00020000 + 0x3 0x0 0xfa000000 0x00008000>; + + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x800000>; + bank-width = <2>; + device-width = <1>; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8313-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x2000>; + + u-boot@0 { + reg = <0x0 0x100000>; + read-only; + }; + + kernel@100000 { + reg = <0x100000 0x300000>; + }; + + fs@400000 { + reg = <0x400000 0x1c00000>; + }; + }; }; soc8313@e0000000 { #address-cells = <1>; #size-cells = <1>; device_type = "soc"; - ranges = <0 e0000000 00100000>; - reg = <e0000000 00000200>; + compatible = "simple-bus"; + ranges = <0x0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00000200>; bus-frequency = <0>; wdt@200 { device_type = "watchdog"; compatible = "mpc83xx_wdt"; - reg = <200 100>; + reg = <0x200 0x100>; }; i2c@3000 { - device_type = "i2c"; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; compatible = "fsl-i2c"; - reg = <3000 100>; - interrupts = <e 8>; - interrupt-parent = < &ipic >; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; dfsrr; }; i2c@3100 { - device_type = "i2c"; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; compatible = "fsl-i2c"; - reg = <3100 100>; - interrupts = <f 8>; - interrupt-parent = < &ipic >; + reg = <0x3100 0x100>; + interrupts = <15 0x8>; + interrupt-parent = <&ipic>; dfsrr; }; spi@7000 { - device_type = "spi"; - compatible = "fsl_spi"; - reg = <7000 1000>; - interrupts = <10 8>; - interrupt-parent = < &ipic >; + cell-index = <0>; + compatible = "fsl,spi"; + reg = <0x7000 0x1000>; + interrupts = <16 0x8>; + interrupt-parent = <&ipic>; mode = "cpu"; }; /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ usb@23000 { - device_type = "usb"; compatible = "fsl-usb2-dr"; - reg = <23000 1000>; + reg = <0x23000 0x1000>; #address-cells = <1>; #size-cells = <0>; - interrupt-parent = < &ipic >; - interrupts = <26 8>; + interrupt-parent = <&ipic>; + interrupts = <38 0x8>; phy_type = "utmi_wide"; }; mdio@24520 { - device_type = "mdio"; - compatible = "gianfar"; - reg = <24520 20>; #address-cells = <1>; #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x24520 0x20>; phy1: ethernet-phy@1 { - interrupt-parent = < &ipic >; - interrupts = <13 8>; - reg = <1>; + interrupt-parent = <&ipic>; + interrupts = <19 0x8>; + reg = <0x1>; device_type = "ethernet-phy"; }; phy4: ethernet-phy@4 { - interrupt-parent = < &ipic >; - interrupts = <14 8>; - reg = <4>; + interrupt-parent = <&ipic>; + interrupts = <20 0x8>; + reg = <0x4>; device_type = "ethernet-phy"; }; }; - ethernet@24000 { + enet0: ethernet@24000 { + cell-index = <0>; device_type = "network"; model = "eTSEC"; compatible = "gianfar"; - reg = <24000 1000>; + reg = <0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <25 8 24 8 23 8>; - interrupt-parent = < &ipic >; + interrupts = <37 0x8 36 0x8 35 0x8>; + interrupt-parent = <&ipic>; phy-handle = < &phy1 >; }; - ethernet@25000 { + enet1: ethernet@25000 { + cell-index = <1>; device_type = "network"; model = "eTSEC"; compatible = "gianfar"; - reg = <25000 1000>; + reg = <0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <22 8 21 8 20 8>; - interrupt-parent = < &ipic >; + interrupts = <34 0x8 33 0x8 32 0x8>; + interrupt-parent = <&ipic>; phy-handle = < &phy4 >; }; - serial@4500 { + serial0: serial@4500 { + cell-index = <0>; device_type = "serial"; compatible = "ns16550"; - reg = <4500 100>; + reg = <0x4500 0x100>; clock-frequency = <0>; - interrupts = <9 8>; - interrupt-parent = < &ipic >; + interrupts = <9 0x8>; + interrupt-parent = <&ipic>; }; - serial@4600 { + serial1: serial@4600 { + cell-index = <1>; device_type = "serial"; compatible = "ns16550"; - reg = <4600 100>; + reg = <0x4600 0x100>; clock-frequency = <0>; - interrupts = <a 8>; - interrupt-parent = < &ipic >; + interrupts = <10 0x8>; + interrupt-parent = <&ipic>; }; crypto@30000 { device_type = "crypto"; model = "SEC2"; compatible = "talitos"; - reg = <30000 7000>; - interrupts = <b 8>; - interrupt-parent = < &ipic >; + reg = <0x30000 0x7000>; + interrupts = <11 0x8>; + interrupt-parent = <&ipic>; /* Rev. 2.2 */ num-channels = <1>; - channel-fifo-len = <18>; - exec-units-mask = <0000004c>; - descriptor-types-mask = <0122003f>; + channel-fifo-len = <24>; + exec-units-mask = <0x0000004c>; + descriptor-types-mask = <0x0122003f>; }; /* IPIC @@ -174,37 +238,38 @@ interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; - reg = <700 100>; + reg = <0x700 0x100>; device_type = "ipic"; }; }; - pci@e0008500 { - interrupt-map-mask = <f800 0 0 7>; + pci0: pci@e0008500 { + cell-index = <1>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x0E -mini PCI */ - 7000 0 0 1 &ipic 12 8 - 7000 0 0 2 &ipic 12 8 - 7000 0 0 3 &ipic 12 8 - 7000 0 0 4 &ipic 12 8 + 0x7000 0x0 0x0 0x1 &ipic 18 0x8 + 0x7000 0x0 0x0 0x2 &ipic 18 0x8 + 0x7000 0x0 0x0 0x3 &ipic 18 0x8 + 0x7000 0x0 0x0 0x4 &ipic 18 0x8 /* IDSEL 0x0F - PCI slot */ - 7800 0 0 1 &ipic 11 8 - 7800 0 0 2 &ipic 12 8 - 7800 0 0 3 &ipic 11 8 - 7800 0 0 4 &ipic 12 8>; - interrupt-parent = < &ipic >; - interrupts = <42 8>; - bus-range = <0 0>; - ranges = <02000000 0 90000000 90000000 0 10000000 - 42000000 0 80000000 80000000 0 10000000 - 01000000 0 00000000 e2000000 0 00100000>; - clock-frequency = <3f940aa>; + 0x7800 0x0 0x0 0x1 &ipic 17 0x8 + 0x7800 0x0 0x0 0x2 &ipic 18 0x8 + 0x7800 0x0 0x0 0x3 &ipic 17 0x8 + 0x7800 0x0 0x0 0x4 &ipic 18 0x8>; + interrupt-parent = <&ipic>; + interrupts = <66 0x8>; + bus-range = <0x0 0x0>; + ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 + 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>; + clock-frequency = <66666666>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <e0008500 100>; + reg = <0xe0008500 0x100>; compatible = "fsl,mpc8349-pci"; device_type = "pci"; }; diff --git a/arch/powerpc/boot/dts/mpc8315erdb.dts b/arch/powerpc/boot/dts/mpc8315erdb.dts new file mode 100644 index 00000000000..b582032ba3d --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8315erdb.dts @@ -0,0 +1,287 @@ +/* + * MPC8315E RDB Device Tree Source + * + * Copyright 2007 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + compatible = "fsl,mpc8315erdb"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8315@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <16384>; + i-cache-size = <16384>; + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x08000000>; // 128MB at 0 + }; + + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8315-elbc", "fsl,elbc", "simple-bus"; + reg = <0xe0005000 0x1000>; + interrupts = <77 0x8>; + interrupt-parent = <&ipic>; + + // CS0 and CS1 are swapped when + // booting from nand, but the + // addresses are the same. + ranges = <0x0 0x0 0xfe000000 0x00800000 + 0x1 0x0 0xe0600000 0x00002000 + 0x2 0x0 0xf0000000 0x00020000 + 0x3 0x0 0xfa000000 0x00008000>; + + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x800000>; + bank-width = <2>; + device-width = <1>; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8315-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x2000>; + + u-boot@0 { + reg = <0x0 0x100000>; + read-only; + }; + + kernel@100000 { + reg = <0x100000 0x300000>; + }; + fs@400000 { + reg = <0x400000 0x1c00000>; + }; + }; + }; + + immr@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + ranges = <0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00000200>; + bus-frequency = <0>; + + wdt@200 { + device_type = "watchdog"; + compatible = "mpc83xx_wdt"; + reg = <0x200 0x100>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + rtc@68 { + device_type = "rtc"; + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + }; + + spi@7000 { + cell-index = <0>; + compatible = "fsl,spi"; + reg = <0x7000 0x1000>; + interrupts = <16 0x8>; + interrupt-parent = <&ipic>; + mode = "cpu"; + }; + + usb@23000 { + compatible = "fsl-usb2-dr"; + reg = <0x23000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&ipic>; + interrupts = <38 0x8>; + phy_type = "utmi"; + }; + + mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x24520 0x20>; + phy0: ethernet-phy@0 { + interrupt-parent = <&ipic>; + interrupts = <20 0x8>; + reg = <0x0>; + device_type = "ethernet-phy"; + }; + phy1: ethernet-phy@1 { + interrupt-parent = <&ipic>; + interrupts = <19 0x8>; + reg = <0x1>; + device_type = "ethernet-phy"; + }; + }; + + enet0: ethernet@24000 { + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <32 0x8 33 0x8 34 0x8>; + interrupt-parent = <&ipic>; + phy-handle = < &phy0 >; + }; + + enet1: ethernet@25000 { + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 0x8 36 0x8 37 0x8>; + interrupt-parent = <&ipic>; + phy-handle = < &phy1 >; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <9 0x8>; + interrupt-parent = <&ipic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <10 0x8>; + interrupt-parent = <&ipic>; + }; + + crypto@30000 { + model = "SEC3"; + device_type = "crypto"; + compatible = "talitos"; + reg = <0x30000 0x10000>; + interrupts = <11 0x8>; + interrupt-parent = <&ipic>; + /* Rev. 3.0 geometry */ + num-channels = <4>; + channel-fifo-len = <24>; + exec-units-mask = <0x000001fe>; + descriptor-types-mask = <0x03ab0ebf>; + }; + + sata@18000 { + compatible = "fsl,mpc8315-sata", "fsl,pq-sata"; + reg = <0x18000 0x1000>; + cell-index = <1>; + interrupts = <44 0x8>; + interrupt-parent = <&ipic>; + }; + + sata@19000 { + compatible = "fsl,mpc8315-sata", "fsl,pq-sata"; + reg = <0x19000 0x1000>; + cell-index = <2>; + interrupts = <45 0x8>; + interrupt-parent = <&ipic>; + }; + + /* IPIC + * interrupts cell = <intr #, sense> + * sense values match linux IORESOURCE_IRQ_* defines: + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + ipic: interrupt-controller@700 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x700 0x100>; + device_type = "ipic"; + }; + }; + + pci0: pci@e0008500 { + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x0E -mini PCI */ + 0x7000 0x0 0x0 0x1 &ipic 18 0x8 + 0x7000 0x0 0x0 0x2 &ipic 18 0x8 + 0x7000 0x0 0x0 0x3 &ipic 18 0x8 + 0x7000 0x0 0x0 0x4 &ipic 18 0x8 + + /* IDSEL 0x0F -mini PCI */ + 0x7800 0x0 0x0 0x1 &ipic 17 0x8 + 0x7800 0x0 0x0 0x2 &ipic 17 0x8 + 0x7800 0x0 0x0 0x3 &ipic 17 0x8 + 0x7800 0x0 0x0 0x4 &ipic 17 0x8 + + /* IDSEL 0x10 - PCI slot */ + 0x8000 0x0 0x0 0x1 &ipic 48 0x8 + 0x8000 0x0 0x0 0x2 &ipic 17 0x8 + 0x8000 0x0 0x0 0x3 &ipic 48 0x8 + 0x8000 0x0 0x0 0x4 &ipic 17 0x8>; + interrupt-parent = <&ipic>; + interrupts = <66 0x8>; + bus-range = <0x0 0x0>; + ranges = <0x02000000 0 0x90000000 0x90000000 0 0x10000000 + 0x42000000 0 0x80000000 0x80000000 0 0x10000000 + 0x01000000 0 0x00000000 0xe0300000 0 0x00100000>; + clock-frequency = <66666666>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008500 0x100>; + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts index c64f3037a13..9bb408371bc 100644 --- a/arch/powerpc/boot/dts/mpc832x_mds.dts +++ b/arch/powerpc/boot/dts/mpc832x_mds.dts @@ -7,25 +7,47 @@ * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. + + * To enable external serial I/O on a Freescale MPC 8323 SYS/MDS board, do + * this: + * + * 1) On chip U61, lift (disconnect) pins 21 (TXD) and 22 (RXD) from the board. + * 2) Solder a wire from U61-21 to P19A-23. P19 is a grid of pins on the board + * next to the serial ports. + * 3) Solder a wire from U61-22 to P19K-22. + * + * Note that there's a typo in the schematic. The board labels the last column + * of pins "P19K", but in the schematic, that column is called "P19J". So if + * you're going by the schematic, the pin is called "P19J-K22". */ +/dts-v1/; + / { model = "MPC8323EMDS"; compatible = "MPC8323EMDS", "MPC832xMDS", "MPC83xxMDS"; #address-cells = <1>; #size-cells = <1>; + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + cpus { #address-cells = <1>; #size-cells = <0>; PowerPC,8323@0 { device_type = "cpu"; - reg = <0>; - d-cache-line-size = <20>; // 32 bytes - i-cache-line-size = <20>; // 32 bytes - d-cache-size = <4000>; // L1, 16K - i-cache-size = <4000>; // L1, 16K + reg = <0x0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <16384>; // L1, 16K + i-cache-size = <16384>; // L1, 16K timebase-frequency = <0>; bus-frequency = <0>; clock-frequency = <0>; @@ -34,86 +56,88 @@ memory { device_type = "memory"; - reg = <00000000 08000000>; + reg = <0x00000000 0x08000000>; }; bcsr@f8000000 { device_type = "board-control"; - reg = <f8000000 8000>; + reg = <0xf8000000 0x8000>; }; soc8323@e0000000 { #address-cells = <1>; #size-cells = <1>; device_type = "soc"; - ranges = <0 e0000000 00100000>; - reg = <e0000000 00000200>; - bus-frequency = <7DE2900>; + ranges = <0x0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00000200>; + bus-frequency = <132000000>; wdt@200 { device_type = "watchdog"; compatible = "mpc83xx_wdt"; - reg = <200 100>; + reg = <0x200 0x100>; }; i2c@3000 { #address-cells = <1>; #size-cells = <0>; - device_type = "i2c"; + cell-index = <0>; compatible = "fsl-i2c"; - reg = <3000 100>; - interrupts = <e 8>; - interrupt-parent = < &ipic >; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; dfsrr; rtc@68 { compatible = "dallas,ds1374"; - reg = <68>; + reg = <0x68>; }; }; - serial@4500 { + serial0: serial@4500 { + cell-index = <0>; device_type = "serial"; compatible = "ns16550"; - reg = <4500 100>; + reg = <0x4500 0x100>; clock-frequency = <0>; - interrupts = <9 8>; - interrupt-parent = < &ipic >; + interrupts = <9 0x8>; + interrupt-parent = <&ipic>; }; - serial@4600 { + serial1: serial@4600 { + cell-index = <1>; device_type = "serial"; compatible = "ns16550"; - reg = <4600 100>; + reg = <0x4600 0x100>; clock-frequency = <0>; - interrupts = <a 8>; - interrupt-parent = < &ipic >; + interrupts = <10 0x8>; + interrupt-parent = <&ipic>; }; crypto@30000 { device_type = "crypto"; model = "SEC2"; compatible = "talitos"; - reg = <30000 7000>; - interrupts = <b 8>; - interrupt-parent = < &ipic >; + reg = <0x30000 0x7000>; + interrupts = <11 0x8>; + interrupt-parent = <&ipic>; /* Rev. 2.2 */ num-channels = <1>; - channel-fifo-len = <18>; - exec-units-mask = <0000004c>; - descriptor-types-mask = <0122003f>; + channel-fifo-len = <24>; + exec-units-mask = <0x0000004c>; + descriptor-types-mask = <0x0122003f>; }; ipic: pic@700 { interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; - reg = <700 100>; + reg = <0x700 0x100>; device_type = "ipic"; }; par_io@1400 { - reg = <1400 100>; + reg = <0x1400 0x100>; device_type = "par_io"; num-ports = <7>; @@ -122,8 +146,8 @@ /* port pin dir open_drain assignment has_irq */ 3 4 3 0 2 0 /* MDIO */ 3 5 1 0 2 0 /* MDC */ - 0 d 2 0 1 0 /* RX_CLK (CLK9) */ - 3 18 2 0 1 0 /* TX_CLK (CLK10) */ + 0 13 2 0 1 0 /* RX_CLK (CLK9) */ + 3 24 2 0 1 0 /* TX_CLK (CLK10) */ 1 0 1 0 1 0 /* TxD0 */ 1 1 1 0 1 0 /* TxD1 */ 1 2 1 0 1 0 /* TxD2 */ @@ -134,31 +158,48 @@ 1 7 2 0 1 0 /* RxD3 */ 1 8 2 0 1 0 /* RX_ER */ 1 9 1 0 1 0 /* TX_ER */ - 1 a 2 0 1 0 /* RX_DV */ - 1 b 2 0 1 0 /* COL */ - 1 c 1 0 1 0 /* TX_EN */ - 1 d 2 0 1 0>;/* CRS */ + 1 10 2 0 1 0 /* RX_DV */ + 1 11 2 0 1 0 /* COL */ + 1 12 1 0 1 0 /* TX_EN */ + 1 13 2 0 1 0>; /* CRS */ }; pio4: ucc_pin@04 { pio-map = < /* port pin dir open_drain assignment has_irq */ - 3 1f 2 0 1 0 /* RX_CLK (CLK7) */ + 3 31 2 0 1 0 /* RX_CLK (CLK7) */ 3 6 2 0 1 0 /* TX_CLK (CLK8) */ - 1 12 1 0 1 0 /* TxD0 */ - 1 13 1 0 1 0 /* TxD1 */ - 1 14 1 0 1 0 /* TxD2 */ - 1 15 1 0 1 0 /* TxD3 */ - 1 16 2 0 1 0 /* RxD0 */ - 1 17 2 0 1 0 /* RxD1 */ - 1 18 2 0 1 0 /* RxD2 */ - 1 19 2 0 1 0 /* RxD3 */ - 1 1a 2 0 1 0 /* RX_ER */ - 1 1b 1 0 1 0 /* TX_ER */ - 1 1c 2 0 1 0 /* RX_DV */ - 1 1d 2 0 1 0 /* COL */ - 1 1e 1 0 1 0 /* TX_EN */ - 1 1f 2 0 1 0>;/* CRS */ + 1 18 1 0 1 0 /* TxD0 */ + 1 19 1 0 1 0 /* TxD1 */ + 1 20 1 0 1 0 /* TxD2 */ + 1 21 1 0 1 0 /* TxD3 */ + 1 22 2 0 1 0 /* RxD0 */ + 1 23 2 0 1 0 /* RxD1 */ + 1 24 2 0 1 0 /* RxD2 */ + 1 25 2 0 1 0 /* RxD3 */ + 1 26 2 0 1 0 /* RX_ER */ + 1 27 1 0 1 0 /* TX_ER */ + 1 28 2 0 1 0 /* RX_DV */ + 1 29 2 0 1 0 /* COL */ + 1 30 1 0 1 0 /* TX_EN */ + 1 31 2 0 1 0>; /* CRS */ }; + pio5: ucc_pin@05 { + pio-map = < + /* + * open has + * port pin dir drain sel irq + */ + 2 0 1 0 2 0 /* TxD5 */ + 2 8 2 0 2 0 /* RxD5 */ + + 2 29 2 0 0 0 /* CTS5 */ + 2 31 1 0 2 0 /* RTS5 */ + + 2 24 2 0 0 0 /* CD */ + + >; + }; + }; }; @@ -166,178 +207,191 @@ #address-cells = <1>; #size-cells = <1>; device_type = "qe"; - model = "QE"; - ranges = <0 e0100000 00100000>; - reg = <e0100000 480>; + compatible = "fsl,qe"; + ranges = <0x0 0xe0100000 0x00100000>; + reg = <0xe0100000 0x480>; brg-frequency = <0>; - bus-frequency = <BCD3D80>; + bus-frequency = <198000000>; muram@10000 { - device_type = "muram"; - ranges = <0 00010000 00004000>; + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,qe-muram", "fsl,cpm-muram"; + ranges = <0x0 0x00010000 0x00004000>; data-only@0 { - reg = <0 4000>; + compatible = "fsl,qe-muram-data", + "fsl,cpm-muram-data"; + reg = <0x0 0x4000>; }; }; spi@4c0 { - device_type = "spi"; - compatible = "fsl_spi"; - reg = <4c0 40>; + cell-index = <0>; + compatible = "fsl,spi"; + reg = <0x4c0 0x40>; interrupts = <2>; - interrupt-parent = < &qeic >; + interrupt-parent = <&qeic>; mode = "cpu"; }; spi@500 { - device_type = "spi"; - compatible = "fsl_spi"; - reg = <500 40>; + cell-index = <1>; + compatible = "fsl,spi"; + reg = <0x500 0x40>; interrupts = <1>; - interrupt-parent = < &qeic >; + interrupt-parent = <&qeic>; mode = "cpu"; }; usb@6c0 { - device_type = "usb"; compatible = "qe_udc"; - reg = <6c0 40 8B00 100>; - interrupts = <b>; - interrupt-parent = < &qeic >; + reg = <0x6c0 0x40 0x8b00 0x100>; + interrupts = <11>; + interrupt-parent = <&qeic>; mode = "slave"; }; - ucc@2200 { + enet0: ucc@2200 { device_type = "network"; compatible = "ucc_geth"; model = "UCC"; + cell-index = <3>; device-id = <3>; - reg = <2200 200>; - interrupts = <22>; - interrupt-parent = < &qeic >; - /* - * mac-address is deprecated and will be removed - * in 2.6.25. Only recent versions of - * U-Boot support local-mac-address, however. - */ - mac-address = [ 00 00 00 00 00 00 ]; + reg = <0x2200 0x200>; + interrupts = <34>; + interrupt-parent = <&qeic>; local-mac-address = [ 00 00 00 00 00 00 ]; - rx-clock = <19>; - tx-clock = <1a>; - phy-handle = < &phy3 >; - pio-handle = < &pio3 >; + rx-clock-name = "clk9"; + tx-clock-name = "clk10"; + phy-handle = <&phy3>; + pio-handle = <&pio3>; }; - ucc@3200 { + enet1: ucc@3200 { device_type = "network"; compatible = "ucc_geth"; model = "UCC"; + cell-index = <4>; device-id = <4>; - reg = <3200 200>; - interrupts = <23>; + reg = <0x3200 0x200>; + interrupts = <35>; + interrupt-parent = <&qeic>; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "clk7"; + tx-clock-name = "clk8"; + phy-handle = <&phy4>; + pio-handle = <&pio4>; + }; + + ucc@2400 { + device_type = "serial"; + compatible = "ucc_uart"; + model = "UCC"; + device-id = <5>; /* The UCC number, 1-7*/ + port-number = <0>; /* Which ttyQEx device */ + soft-uart; /* We need Soft-UART */ + reg = <0x2400 0x200>; + interrupts = <40>; /* From Table 18-12 */ interrupt-parent = < &qeic >; /* - * mac-address is deprecated and will be removed - * in 2.6.25. Only recent versions of - * U-Boot support local-mac-address, however. + * For Soft-UART, we need to set TX to 1X, which + * means specifying separate clock sources. */ - mac-address = [ 00 00 00 00 00 00 ]; - local-mac-address = [ 00 00 00 00 00 00 ]; - rx-clock = <17>; - tx-clock = <18>; - phy-handle = < &phy4 >; - pio-handle = < &pio4 >; + rx-clock-name = "brg5"; + tx-clock-name = "brg6"; + pio-handle = < &pio5 >; }; + mdio@2320 { #address-cells = <1>; #size-cells = <0>; - reg = <2320 18>; - device_type = "mdio"; - compatible = "ucc_geth_phy"; + reg = <0x2320 0x18>; + compatible = "fsl,ucc-mdio"; phy3: ethernet-phy@03 { - interrupt-parent = < &ipic >; - interrupts = <11 8>; - reg = <3>; + interrupt-parent = <&ipic>; + interrupts = <17 0x8>; + reg = <0x3>; device_type = "ethernet-phy"; }; phy4: ethernet-phy@04 { - interrupt-parent = < &ipic >; - interrupts = <12 8>; - reg = <4>; + interrupt-parent = <&ipic>; + interrupts = <18 0x8>; + reg = <0x4>; device_type = "ethernet-phy"; }; }; - qeic: qeic@80 { + qeic: interrupt-controller@80 { interrupt-controller; - device_type = "qeic"; + compatible = "fsl,qe-ic"; #address-cells = <0>; #interrupt-cells = <1>; - reg = <80 80>; + reg = <0x80 0x80>; big-endian; - interrupts = <20 8 21 8>; //high:32 low:33 - interrupt-parent = < &ipic >; + interrupts = <32 0x8 33 0x8>; //high:32 low:33 + interrupt-parent = <&ipic>; }; }; - pci@e0008500 { - interrupt-map-mask = <f800 0 0 7>; + pci0: pci@e0008500 { + cell-index = <1>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x11 AD17 */ - 8800 0 0 1 &ipic 14 8 - 8800 0 0 2 &ipic 15 8 - 8800 0 0 3 &ipic 16 8 - 8800 0 0 4 &ipic 17 8 + 0x8800 0x0 0x0 0x1 &ipic 20 0x8 + 0x8800 0x0 0x0 0x2 &ipic 21 0x8 + 0x8800 0x0 0x0 0x3 &ipic 22 0x8 + 0x8800 0x0 0x0 0x4 &ipic 23 0x8 /* IDSEL 0x12 AD18 */ - 9000 0 0 1 &ipic 16 8 - 9000 0 0 2 &ipic 17 8 - 9000 0 0 3 &ipic 14 8 - 9000 0 0 4 &ipic 15 8 + 0x9000 0x0 0x0 0x1 &ipic 22 0x8 + 0x9000 0x0 0x0 0x2 &ipic 23 0x8 + 0x9000 0x0 0x0 0x3 &ipic 20 0x8 + 0x9000 0x0 0x0 0x4 &ipic 21 0x8 /* IDSEL 0x13 AD19 */ - 9800 0 0 1 &ipic 17 8 - 9800 0 0 2 &ipic 14 8 - 9800 0 0 3 &ipic 15 8 - 9800 0 0 4 &ipic 16 8 + 0x9800 0x0 0x0 0x1 &ipic 23 0x8 + 0x9800 0x0 0x0 0x2 &ipic 20 0x8 + 0x9800 0x0 0x0 0x3 &ipic 21 0x8 + 0x9800 0x0 0x0 0x4 &ipic 22 0x8 /* IDSEL 0x15 AD21*/ - a800 0 0 1 &ipic 14 8 - a800 0 0 2 &ipic 15 8 - a800 0 0 3 &ipic 16 8 - a800 0 0 4 &ipic 17 8 + 0xa800 0x0 0x0 0x1 &ipic 20 0x8 + 0xa800 0x0 0x0 0x2 &ipic 21 0x8 + 0xa800 0x0 0x0 0x3 &ipic 22 0x8 + 0xa800 0x0 0x0 0x4 &ipic 23 0x8 /* IDSEL 0x16 AD22*/ - b000 0 0 1 &ipic 17 8 - b000 0 0 2 &ipic 14 8 - b000 0 0 3 &ipic 15 8 - b000 0 0 4 &ipic 16 8 + 0xb000 0x0 0x0 0x1 &ipic 23 0x8 + 0xb000 0x0 0x0 0x2 &ipic 20 0x8 + 0xb000 0x0 0x0 0x3 &ipic 21 0x8 + 0xb000 0x0 0x0 0x4 &ipic 22 0x8 /* IDSEL 0x17 AD23*/ - b800 0 0 1 &ipic 16 8 - b800 0 0 2 &ipic 17 8 - b800 0 0 3 &ipic 14 8 - b800 0 0 4 &ipic 15 8 + 0xb800 0x0 0x0 0x1 &ipic 22 0x8 + 0xb800 0x0 0x0 0x2 &ipic 23 0x8 + 0xb800 0x0 0x0 0x3 &ipic 20 0x8 + 0xb800 0x0 0x0 0x4 &ipic 21 0x8 /* IDSEL 0x18 AD24*/ - c000 0 0 1 &ipic 15 8 - c000 0 0 2 &ipic 16 8 - c000 0 0 3 &ipic 17 8 - c000 0 0 4 &ipic 14 8>; - interrupt-parent = < &ipic >; - interrupts = <42 8>; - bus-range = <0 0>; - ranges = <02000000 0 90000000 90000000 0 10000000 - 42000000 0 80000000 80000000 0 10000000 - 01000000 0 00000000 d0000000 0 00100000>; + 0xc000 0x0 0x0 0x1 &ipic 21 0x8 + 0xc000 0x0 0x0 0x2 &ipic 22 0x8 + 0xc000 0x0 0x0 0x3 &ipic 23 0x8 + 0xc000 0x0 0x0 0x4 &ipic 20 0x8>; + interrupt-parent = <&ipic>; + interrupts = <66 0x8>; + bus-range = <0x0 0x0>; + ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 + 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xd0000000 0x0 0x00100000>; clock-frequency = <0>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <e0008500 100>; + reg = <0xe0008500 0x100>; compatible = "fsl,mpc8349-pci"; device_type = "pci"; }; diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts index 388c8a7012e..94f93d209de 100644 --- a/arch/powerpc/boot/dts/mpc832x_rdb.dts +++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts @@ -9,23 +9,33 @@ * option) any later version. */ +/dts-v1/; + / { model = "MPC8323ERDB"; compatible = "MPC8323ERDB", "MPC832xRDB", "MPC83xxRDB"; #address-cells = <1>; #size-cells = <1>; + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + cpus { #address-cells = <1>; #size-cells = <0>; PowerPC,8323@0 { device_type = "cpu"; - reg = <0>; - d-cache-line-size = <20>; // 32 bytes - i-cache-line-size = <20>; // 32 bytes - d-cache-size = <4000>; // L1, 16K - i-cache-size = <4000>; // L1, 16K + reg = <0x0>; + d-cache-line-size = <0x20>; // 32 bytes + i-cache-line-size = <0x20>; // 32 bytes + d-cache-size = <16384>; // L1, 16K + i-cache-size = <16384>; // L1, 16K timebase-frequency = <0>; bus-frequency = <0>; clock-frequency = <0>; @@ -34,47 +44,51 @@ memory { device_type = "memory"; - reg = <00000000 04000000>; + reg = <0x00000000 0x04000000>; }; soc8323@e0000000 { #address-cells = <1>; #size-cells = <1>; device_type = "soc"; - ranges = <0 e0000000 00100000>; - reg = <e0000000 00000200>; + ranges = <0x0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00000200>; bus-frequency = <0>; wdt@200 { device_type = "watchdog"; compatible = "mpc83xx_wdt"; - reg = <200 100>; + reg = <0x200 0x100>; }; i2c@3000 { - device_type = "i2c"; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; compatible = "fsl-i2c"; - reg = <3000 100>; - interrupts = <e 8>; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; interrupt-parent = <&pic>; dfsrr; }; - serial@4500 { + serial0: serial@4500 { + cell-index = <0>; device_type = "serial"; compatible = "ns16550"; - reg = <4500 100>; + reg = <0x4500 0x100>; clock-frequency = <0>; - interrupts = <9 8>; + interrupts = <9 0x8>; interrupt-parent = <&pic>; }; - serial@4600 { + serial1: serial@4600 { + cell-index = <1>; device_type = "serial"; compatible = "ns16550"; - reg = <4600 100>; + reg = <0x4600 0x100>; clock-frequency = <0>; - interrupts = <a 8>; + interrupts = <10 0x8>; interrupt-parent = <&pic>; }; @@ -82,26 +96,26 @@ device_type = "crypto"; model = "SEC2"; compatible = "talitos"; - reg = <30000 7000>; - interrupts = <b 8>; + reg = <0x30000 0x7000>; + interrupts = <11 0x8>; interrupt-parent = <&pic>; /* Rev. 2.2 */ num-channels = <1>; - channel-fifo-len = <18>; - exec-units-mask = <0000004c>; - descriptor-types-mask = <0122003f>; + channel-fifo-len = <24>; + exec-units-mask = <0x0000004c>; + descriptor-types-mask = <0x0122003f>; }; pic:pic@700 { interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; - reg = <700 100>; + reg = <0x700 0x100>; device_type = "ipic"; }; par_io@1400 { - reg = <1400 100>; + reg = <0x1400 0x100>; device_type = "par_io"; num-ports = <7>; @@ -110,28 +124,28 @@ /* port pin dir open_drain assignment has_irq */ 3 4 3 0 2 0 /* MDIO */ 3 5 1 0 2 0 /* MDC */ - 3 15 2 0 1 0 /* RX_CLK (CLK16) */ - 3 17 2 0 1 0 /* TX_CLK (CLK3) */ - 0 12 1 0 1 0 /* TxD0 */ - 0 13 1 0 1 0 /* TxD1 */ - 0 14 1 0 1 0 /* TxD2 */ - 0 15 1 0 1 0 /* TxD3 */ - 0 16 2 0 1 0 /* RxD0 */ - 0 17 2 0 1 0 /* RxD1 */ - 0 18 2 0 1 0 /* RxD2 */ - 0 19 2 0 1 0 /* RxD3 */ - 0 1a 2 0 1 0 /* RX_ER */ - 0 1b 1 0 1 0 /* TX_ER */ - 0 1c 2 0 1 0 /* RX_DV */ - 0 1d 2 0 1 0 /* COL */ - 0 1e 1 0 1 0 /* TX_EN */ - 0 1f 2 0 1 0>; /* CRS */ + 3 21 2 0 1 0 /* RX_CLK (CLK16) */ + 3 23 2 0 1 0 /* TX_CLK (CLK3) */ + 0 18 1 0 1 0 /* TxD0 */ + 0 19 1 0 1 0 /* TxD1 */ + 0 20 1 0 1 0 /* TxD2 */ + 0 21 1 0 1 0 /* TxD3 */ + 0 22 2 0 1 0 /* RxD0 */ + 0 23 2 0 1 0 /* RxD1 */ + 0 24 2 0 1 0 /* RxD2 */ + 0 25 2 0 1 0 /* RxD3 */ + 0 26 2 0 1 0 /* RX_ER */ + 0 27 1 0 1 0 /* TX_ER */ + 0 28 2 0 1 0 /* RX_DV */ + 0 29 2 0 1 0 /* COL */ + 0 30 1 0 1 0 /* TX_EN */ + 0 31 2 0 1 0>; /* CRS */ }; ucc3pio:ucc_pin@03 { pio-map = < /* port pin dir open_drain assignment has_irq */ - 0 d 2 0 1 0 /* RX_CLK (CLK9) */ - 3 18 2 0 1 0 /* TX_CLK (CLK10) */ + 0 13 2 0 1 0 /* RX_CLK (CLK9) */ + 3 24 2 0 1 0 /* TX_CLK (CLK10) */ 1 0 1 0 1 0 /* TxD0 */ 1 1 1 0 1 0 /* TxD1 */ 1 2 1 0 1 0 /* TxD2 */ @@ -142,10 +156,10 @@ 1 7 2 0 1 0 /* RxD3 */ 1 8 2 0 1 0 /* RX_ER */ 1 9 1 0 1 0 /* TX_ER */ - 1 a 2 0 1 0 /* RX_DV */ - 1 b 2 0 1 0 /* COL */ - 1 c 1 0 1 0 /* TX_EN */ - 1 d 2 0 1 0>; /* CRS */ + 1 10 2 0 1 0 /* RX_DV */ + 1 11 2 0 1 0 /* COL */ + 1 12 1 0 1 0 /* TX_EN */ + 1 13 2 0 1 0>; /* CRS */ }; }; }; @@ -154,77 +168,71 @@ #address-cells = <1>; #size-cells = <1>; device_type = "qe"; - model = "QE"; - ranges = <0 e0100000 00100000>; - reg = <e0100000 480>; + compatible = "fsl,qe"; + ranges = <0x0 0xe0100000 0x00100000>; + reg = <0xe0100000 0x480>; brg-frequency = <0>; - bus-frequency = <BCD3D80>; + bus-frequency = <198000000>; muram@10000 { - device_type = "muram"; - ranges = <0 00010000 00004000>; + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,qe-muram", "fsl,cpm-muram"; + ranges = <0x0 0x00010000 0x00004000>; data-only@0 { - reg = <0 4000>; + compatible = "fsl,qe-muram-data", + "fsl,cpm-muram-data"; + reg = <0x0 0x4000>; }; }; spi@4c0 { - device_type = "spi"; - compatible = "fsl_spi"; - reg = <4c0 40>; + cell-index = <0>; + compatible = "fsl,spi"; + reg = <0x4c0 0x40>; interrupts = <2>; interrupt-parent = <&qeic>; mode = "cpu-qe"; }; spi@500 { - device_type = "spi"; - compatible = "fsl_spi"; - reg = <500 40>; + cell-index = <1>; + compatible = "fsl,spi"; + reg = <0x500 0x40>; interrupts = <1>; interrupt-parent = <&qeic>; mode = "cpu"; }; - ucc@3000 { + enet0: ucc@3000 { device_type = "network"; compatible = "ucc_geth"; model = "UCC"; + cell-index = <2>; device-id = <2>; - reg = <3000 200>; - interrupts = <21>; + reg = <0x3000 0x200>; + interrupts = <33>; interrupt-parent = <&qeic>; - /* - * mac-address is deprecated and will be removed - * in 2.6.25. Only recent versions of - * U-Boot support local-mac-address, however. - */ - mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ]; - rx-clock = <20>; - tx-clock = <13>; + rx-clock-name = "clk16"; + tx-clock-name = "clk3"; phy-handle = <&phy00>; pio-handle = <&ucc2pio>; }; - ucc@2200 { + enet1: ucc@2200 { device_type = "network"; compatible = "ucc_geth"; model = "UCC"; + cell-index = <3>; device-id = <3>; - reg = <2200 200>; - interrupts = <22>; + reg = <0x2200 0x200>; + interrupts = <34>; interrupt-parent = <&qeic>; - /* - * mac-address is deprecated and will be removed - * in 2.6.25. Only recent versions of - * U-Boot support local-mac-address, however. - */ - mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ]; - rx-clock = <19>; - tx-clock = <1a>; + rx-clock-name = "clk9"; + tx-clock-name = "clk10"; phy-handle = <&phy04>; pio-handle = <&ucc3pio>; }; @@ -232,65 +240,65 @@ mdio@3120 { #address-cells = <1>; #size-cells = <0>; - reg = <3120 18>; - device_type = "mdio"; - compatible = "ucc_geth_phy"; + reg = <0x3120 0x18>; + compatible = "fsl,ucc-mdio"; phy00:ethernet-phy@00 { interrupt-parent = <&pic>; interrupts = <0>; - reg = <0>; + reg = <0x0>; device_type = "ethernet-phy"; }; phy04:ethernet-phy@04 { interrupt-parent = <&pic>; interrupts = <0>; - reg = <4>; + reg = <0x4>; device_type = "ethernet-phy"; }; }; - qeic:qeic@80 { + qeic:interrupt-controller@80 { interrupt-controller; - device_type = "qeic"; + compatible = "fsl,qe-ic"; #address-cells = <0>; #interrupt-cells = <1>; - reg = <80 80>; + reg = <0x80 0x80>; big-endian; - interrupts = <20 8 21 8>; //high:32 low:33 + interrupts = <32 0x8 33 0x8>; //high:32 low:33 interrupt-parent = <&pic>; }; }; - pci@e0008500 { - interrupt-map-mask = <f800 0 0 7>; + pci0: pci@e0008500 { + cell-index = <1>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x10 AD16 (USB) */ - 8000 0 0 1 &pic 11 8 + 0x8000 0x0 0x0 0x1 &pic 17 0x8 /* IDSEL 0x11 AD17 (Mini1)*/ - 8800 0 0 1 &pic 12 8 - 8800 0 0 2 &pic 13 8 - 8800 0 0 3 &pic 14 8 - 8800 0 0 4 &pic 30 8 + 0x8800 0x0 0x0 0x1 &pic 18 0x8 + 0x8800 0x0 0x0 0x2 &pic 19 0x8 + 0x8800 0x0 0x0 0x3 &pic 20 0x8 + 0x8800 0x0 0x0 0x4 &pic 48 0x8 /* IDSEL 0x12 AD18 (PCI/Mini2) */ - 9000 0 0 1 &pic 13 8 - 9000 0 0 2 &pic 14 8 - 9000 0 0 3 &pic 30 8 - 9000 0 0 4 &pic 11 8>; + 0x9000 0x0 0x0 0x1 &pic 19 0x8 + 0x9000 0x0 0x0 0x2 &pic 20 0x8 + 0x9000 0x0 0x0 0x3 &pic 48 0x8 + 0x9000 0x0 0x0 0x4 &pic 17 0x8>; interrupt-parent = <&pic>; - interrupts = <42 8>; - bus-range = <0 0>; - ranges = <42000000 0 80000000 80000000 0 10000000 - 02000000 0 90000000 90000000 0 10000000 - 01000000 0 d0000000 d0000000 0 04000000>; + interrupts = <66 0x8>; + bus-range = <0x0 0x0>; + ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 + 0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 + 0x01000000 0x0 0xd0000000 0xd0000000 0x0 0x04000000>; clock-frequency = <0>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <e0008500 100>; + reg = <0xe0008500 0x100>; compatible = "fsl,mpc8349-pci"; device_type = "pci"; }; diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts index 5072f6d0a46..9426676b0b7 100644 --- a/arch/powerpc/boot/dts/mpc8349emitx.dts +++ b/arch/powerpc/boot/dts/mpc8349emitx.dts @@ -8,23 +8,35 @@ * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ + +/dts-v1/; + / { model = "MPC8349EMITX"; compatible = "MPC8349EMITX", "MPC834xMITX", "MPC83xxMITX"; #address-cells = <1>; #size-cells = <1>; + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + }; + cpus { #address-cells = <1>; #size-cells = <0>; PowerPC,8349@0 { device_type = "cpu"; - reg = <0>; - d-cache-line-size = <20>; - i-cache-line-size = <20>; - d-cache-size = <8000>; - i-cache-size = <8000>; + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; timebase-frequency = <0>; // from bootloader bus-frequency = <0>; // from bootloader clock-frequency = <0>; // from bootloader @@ -33,222 +45,223 @@ memory { device_type = "memory"; - reg = <00000000 10000000>; + reg = <0x00000000 0x10000000>; }; soc8349@e0000000 { #address-cells = <1>; #size-cells = <1>; device_type = "soc"; - ranges = <0 e0000000 00100000>; - reg = <e0000000 00000200>; + ranges = <0x0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00000200>; bus-frequency = <0>; // from bootloader wdt@200 { device_type = "watchdog"; compatible = "mpc83xx_wdt"; - reg = <200 100>; + reg = <0x200 0x100>; }; i2c@3000 { - device_type = "i2c"; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; compatible = "fsl-i2c"; - reg = <3000 100>; - interrupts = <e 8>; - interrupt-parent = < &ipic >; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; dfsrr; }; i2c@3100 { - device_type = "i2c"; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; compatible = "fsl-i2c"; - reg = <3100 100>; - interrupts = <f 8>; - interrupt-parent = < &ipic >; + reg = <0x3100 0x100>; + interrupts = <15 0x8>; + interrupt-parent = <&ipic>; dfsrr; }; spi@7000 { - device_type = "spi"; - compatible = "fsl_spi"; - reg = <7000 1000>; - interrupts = <10 8>; - interrupt-parent = < &ipic >; + cell-index = <0>; + compatible = "fsl,spi"; + reg = <0x7000 0x1000>; + interrupts = <16 0x8>; + interrupt-parent = <&ipic>; mode = "cpu"; }; usb@22000 { - device_type = "usb"; compatible = "fsl-usb2-mph"; - reg = <22000 1000>; + reg = <0x22000 0x1000>; #address-cells = <1>; #size-cells = <0>; - interrupt-parent = < &ipic >; - interrupts = <27 8>; + interrupt-parent = <&ipic>; + interrupts = <39 0x8>; phy_type = "ulpi"; port1; }; usb@23000 { - device_type = "usb"; compatible = "fsl-usb2-dr"; - reg = <23000 1000>; + reg = <0x23000 0x1000>; #address-cells = <1>; #size-cells = <0>; - interrupt-parent = < &ipic >; - interrupts = <26 8>; + interrupt-parent = <&ipic>; + interrupts = <38 0x8>; dr_mode = "peripheral"; phy_type = "ulpi"; }; mdio@24520 { - device_type = "mdio"; - compatible = "gianfar"; - reg = <24520 20>; #address-cells = <1>; #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x24520 0x20>; /* Vitesse 8201 */ phy1c: ethernet-phy@1c { - interrupt-parent = < &ipic >; - interrupts = <12 8>; - reg = <1c>; - device_type = "ethernet-phy"; - }; - - /* Vitesse 7385 */ - phy1f: ethernet-phy@1f { - interrupt-parent = < &ipic >; - interrupts = <12 8>; - reg = <1f>; + interrupt-parent = <&ipic>; + interrupts = <18 0x8>; + reg = <0x1c>; device_type = "ethernet-phy"; }; }; - ethernet@24000 { + enet0: ethernet@24000 { + cell-index = <0>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; - reg = <24000 1000>; - /* - * address is deprecated and will be removed - * in 2.6.25. Only recent versions of - * U-Boot support local-mac-address, however. - */ - address = [ 00 00 00 00 00 00 ]; + reg = <0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <20 8 21 8 22 8>; - interrupt-parent = < &ipic >; - phy-handle = < &phy1c >; + interrupts = <32 0x8 33 0x8 34 0x8>; + interrupt-parent = <&ipic>; + phy-handle = <&phy1c>; linux,network-index = <0>; }; - ethernet@25000 { - #address-cells = <1>; - #size-cells = <0>; + enet1: ethernet@25000 { + cell-index = <1>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; - reg = <25000 1000>; - /* - * address is deprecated and will be removed - * in 2.6.25. Only recent versions of - * U-Boot support local-mac-address, however. - */ - address = [ 00 00 00 00 00 00 ]; + reg = <0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <23 8 24 8 25 8>; - interrupt-parent = < &ipic >; - phy-handle = < &phy1f >; + interrupts = <35 0x8 36 0x8 37 0x8>; + interrupt-parent = <&ipic>; + /* Vitesse 7385 isn't on the MDIO bus */ + fixed-link = <1 1 1000 0 0>; linux,network-index = <1>; }; - serial@4500 { + serial0: serial@4500 { + cell-index = <0>; device_type = "serial"; compatible = "ns16550"; - reg = <4500 100>; + reg = <0x4500 0x100>; clock-frequency = <0>; // from bootloader - interrupts = <9 8>; - interrupt-parent = < &ipic >; + interrupts = <9 0x8>; + interrupt-parent = <&ipic>; }; - serial@4600 { + serial1: serial@4600 { + cell-index = <1>; device_type = "serial"; compatible = "ns16550"; - reg = <4600 100>; + reg = <0x4600 0x100>; clock-frequency = <0>; // from bootloader - interrupts = <a 8>; - interrupt-parent = < &ipic >; + interrupts = <10 0x8>; + interrupt-parent = <&ipic>; }; crypto@30000 { device_type = "crypto"; model = "SEC2"; compatible = "talitos"; - reg = <30000 10000>; - interrupts = <b 8>; - interrupt-parent = < &ipic >; + reg = <0x30000 0x10000>; + interrupts = <11 0x8>; + interrupt-parent = <&ipic>; num-channels = <4>; - channel-fifo-len = <18>; - exec-units-mask = <0000007e>; - descriptor-types-mask = <01010ebf>; + channel-fifo-len = <24>; + exec-units-mask = <0x0000007e>; + descriptor-types-mask = <0x01010ebf>; }; ipic: pic@700 { interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; - reg = <700 100>; + reg = <0x700 0x100>; device_type = "ipic"; }; }; - pci@e0008500 { - interrupt-map-mask = <f800 0 0 7>; + pci0: pci@e0008500 { + cell-index = <1>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x10 - SATA */ - 8000 0 0 1 &ipic 16 8 /* SATA_INTA */ + 0x8000 0x0 0x0 0x1 &ipic 22 0x8 /* SATA_INTA */ >; - interrupt-parent = < &ipic >; - interrupts = <42 8>; - bus-range = <0 0>; - ranges = <42000000 0 80000000 80000000 0 10000000 - 02000000 0 90000000 90000000 0 10000000 - 01000000 0 00000000 e2000000 0 01000000>; - clock-frequency = <3f940aa>; + interrupt-parent = <&ipic>; + interrupts = <66 0x8>; + bus-range = <0x0 0x0>; + ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 + 0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x01000000>; + clock-frequency = <66666666>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <e0008500 100>; + reg = <0xe0008500 0x100>; compatible = "fsl,mpc8349-pci"; device_type = "pci"; }; - pci@e0008600 { - interrupt-map-mask = <f800 0 0 7>; + pci1: pci@e0008600 { + cell-index = <2>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x0E - MiniPCI Slot */ - 7000 0 0 1 &ipic 15 8 /* PCI_INTA */ + 0x7000 0x0 0x0 0x1 &ipic 21 0x8 /* PCI_INTA */ /* IDSEL 0x0F - PCI Slot */ - 7800 0 0 1 &ipic 14 8 /* PCI_INTA */ - 7800 0 0 2 &ipic 15 8 /* PCI_INTB */ - >; - interrupt-parent = < &ipic >; - interrupts = <43 8>; - bus-range = <0 0>; - ranges = <42000000 0 a0000000 a0000000 0 10000000 - 02000000 0 b0000000 b0000000 0 10000000 - 01000000 0 00000000 e3000000 0 01000000>; - clock-frequency = <3f940aa>; + 0x7800 0x0 0x0 0x1 &ipic 20 0x8 /* PCI_INTA */ + 0x7800 0x0 0x0 0x2 &ipic 21 0x8 /* PCI_INTB */ + >; + interrupt-parent = <&ipic>; + interrupts = <67 0x8>; + bus-range = <0x0 0x0>; + ranges = <0x42000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000 + 0x02000000 0x0 0xb0000000 0xb0000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe3000000 0x0 0x01000000>; + clock-frequency = <66666666>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <e0008600 100>; + reg = <0xe0008600 0x100>; compatible = "fsl,mpc8349-pci"; device_type = "pci"; }; + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8349e-localbus", + "fsl,pq2pro-localbus"; + reg = <0xe0005000 0xd8>; + ranges = <0x3 0x0 0xf0000000 0x210>; - + pata@3,0 { + compatible = "fsl,mpc8349emitx-pata", "ata-generic"; + reg = <0x3 0x0 0x10 0x3 0x20c 0x4>; + reg-shift = <1>; + pio-mode = <6>; + interrupts = <23 0x8>; + interrupt-parent = <&ipic>; + }; + }; }; diff --git a/arch/powerpc/boot/dts/mpc8349emitxgp.dts b/arch/powerpc/boot/dts/mpc8349emitxgp.dts index 074f7a2ab7e..f81d735e6e7 100644 --- a/arch/powerpc/boot/dts/mpc8349emitxgp.dts +++ b/arch/powerpc/boot/dts/mpc8349emitxgp.dts @@ -8,23 +8,33 @@ * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ + +/dts-v1/; + / { model = "MPC8349EMITXGP"; compatible = "MPC8349EMITXGP", "MPC834xMITX", "MPC83xxMITX"; #address-cells = <1>; #size-cells = <1>; + aliases { + ethernet0 = &enet0; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + cpus { #address-cells = <1>; #size-cells = <0>; PowerPC,8349@0 { device_type = "cpu"; - reg = <0>; - d-cache-line-size = <20>; - i-cache-line-size = <20>; - d-cache-size = <8000>; - i-cache-size = <8000>; + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; timebase-frequency = <0>; // from bootloader bus-frequency = <0>; // from bootloader clock-frequency = <0>; // from bootloader @@ -33,148 +43,154 @@ memory { device_type = "memory"; - reg = <00000000 10000000>; + reg = <0x00000000 0x10000000>; }; soc8349@e0000000 { #address-cells = <1>; #size-cells = <1>; device_type = "soc"; - ranges = <0 e0000000 00100000>; - reg = <e0000000 00000200>; + ranges = <0x0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00000200>; bus-frequency = <0>; // from bootloader wdt@200 { device_type = "watchdog"; compatible = "mpc83xx_wdt"; - reg = <200 100>; + reg = <0x200 0x100>; }; i2c@3000 { - device_type = "i2c"; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; compatible = "fsl-i2c"; - reg = <3000 100>; - interrupts = <e 8>; - interrupt-parent = < &ipic >; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; dfsrr; }; i2c@3100 { - device_type = "i2c"; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; compatible = "fsl-i2c"; - reg = <3100 100>; - interrupts = <f 8>; - interrupt-parent = < &ipic >; + reg = <0x3100 0x100>; + interrupts = <15 0x8>; + interrupt-parent = <&ipic>; dfsrr; }; spi@7000 { - device_type = "spi"; - compatible = "fsl_spi"; - reg = <7000 1000>; - interrupts = <10 8>; - interrupt-parent = < &ipic >; + cell-index = <0>; + compatible = "fsl,spi"; + reg = <0x7000 0x1000>; + interrupts = <16 0x8>; + interrupt-parent = <&ipic>; mode = "cpu"; }; usb@23000 { - device_type = "usb"; compatible = "fsl-usb2-dr"; - reg = <23000 1000>; + reg = <0x23000 0x1000>; #address-cells = <1>; #size-cells = <0>; - interrupt-parent = < &ipic >; - interrupts = <26 8>; + interrupt-parent = <&ipic>; + interrupts = <38 0x8>; dr_mode = "otg"; phy_type = "ulpi"; }; mdio@24520 { - device_type = "mdio"; - compatible = "gianfar"; - reg = <24520 20>; #address-cells = <1>; #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x24520 0x20>; /* Vitesse 8201 */ phy1c: ethernet-phy@1c { - interrupt-parent = < &ipic >; - interrupts = <12 8>; - reg = <1c>; + interrupt-parent = <&ipic>; + interrupts = <18 0x8>; + reg = <0x1c>; device_type = "ethernet-phy"; }; }; - ethernet@24000 { + enet0: ethernet@24000 { + cell-index = <0>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; - reg = <24000 1000>; + reg = <0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <20 8 21 8 22 8>; - interrupt-parent = < &ipic >; - phy-handle = < &phy1c >; + interrupts = <32 0x8 33 0x8 34 0x8>; + interrupt-parent = <&ipic>; + phy-handle = <&phy1c>; linux,network-index = <0>; }; - serial@4500 { + serial0: serial@4500 { + cell-index = <0>; device_type = "serial"; compatible = "ns16550"; - reg = <4500 100>; + reg = <0x4500 0x100>; clock-frequency = <0>; // from bootloader - interrupts = <9 8>; - interrupt-parent = < &ipic >; + interrupts = <9 0x8>; + interrupt-parent = <&ipic>; }; - serial@4600 { + serial1: serial@4600 { + cell-index = <1>; device_type = "serial"; compatible = "ns16550"; - reg = <4600 100>; + reg = <0x4600 0x100>; clock-frequency = <0>; // from bootloader - interrupts = <a 8>; - interrupt-parent = < &ipic >; + interrupts = <10 0x8>; + interrupt-parent = <&ipic>; }; crypto@30000 { device_type = "crypto"; model = "SEC2"; compatible = "talitos"; - reg = <30000 10000>; - interrupts = <b 8>; - interrupt-parent = < &ipic >; + reg = <0x30000 0x10000>; + interrupts = <11 0x8>; + interrupt-parent = <&ipic>; num-channels = <4>; - channel-fifo-len = <18>; - exec-units-mask = <0000007e>; - descriptor-types-mask = <01010ebf>; + channel-fifo-len = <24>; + exec-units-mask = <0x0000007e>; + descriptor-types-mask = <0x01010ebf>; }; ipic: pic@700 { interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; - reg = <700 100>; + reg = <0x700 0x100>; device_type = "ipic"; }; }; - pci@e0008600 { - interrupt-map-mask = <f800 0 0 7>; + pci0: pci@e0008600 { + cell-index = <2>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x0F - PCI Slot */ - 7800 0 0 1 &ipic 14 8 /* PCI_INTA */ - 7800 0 0 2 &ipic 15 8 /* PCI_INTB */ + 0x7800 0x0 0x0 0x1 &ipic 20 0x8 /* PCI_INTA */ + 0x7800 0x0 0x0 0x2 &ipic 21 0x8 /* PCI_INTB */ >; - interrupt-parent = < &ipic >; - interrupts = <43 8>; - bus-range = <1 1>; - ranges = <42000000 0 a0000000 a0000000 0 10000000 - 02000000 0 b0000000 b0000000 0 10000000 - 01000000 0 00000000 e3000000 0 01000000>; - clock-frequency = <3f940aa>; + interrupt-parent = <&ipic>; + interrupts = <67 0x8>; + bus-range = <0x1 0x1>; + ranges = <0x42000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000 + 0x02000000 0x0 0xb0000000 0xb0000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe3000000 0x0 0x01000000>; + clock-frequency = <66666666>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <e0008600 100>; + reg = <0xe0008600 0x100>; compatible = "fsl,mpc8349-pci"; device_type = "pci"; }; diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts index 49363f89cb7..7480edae85e 100644 --- a/arch/powerpc/boot/dts/mpc834x_mds.dts +++ b/arch/powerpc/boot/dts/mpc834x_mds.dts @@ -9,23 +9,34 @@ * option) any later version. */ +/dts-v1/; + / { model = "MPC8349EMDS"; compatible = "MPC8349EMDS", "MPC834xMDS", "MPC83xxMDS"; #address-cells = <1>; #size-cells = <1>; + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + }; + cpus { #address-cells = <1>; #size-cells = <0>; PowerPC,8349@0 { device_type = "cpu"; - reg = <0>; - d-cache-line-size = <20>; // 32 bytes - i-cache-line-size = <20>; // 32 bytes - d-cache-size = <8000>; // L1, 32K - i-cache-size = <8000>; // L1, 32K + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; timebase-frequency = <0>; // from bootloader bus-frequency = <0>; // from bootloader clock-frequency = <0>; // from bootloader @@ -34,164 +45,152 @@ memory { device_type = "memory"; - reg = <00000000 10000000>; // 256MB at 0 + reg = <0x00000000 0x10000000>; // 256MB at 0 }; bcsr@e2400000 { device_type = "board-control"; - reg = <e2400000 8000>; + reg = <0xe2400000 0x8000>; }; soc8349@e0000000 { #address-cells = <1>; #size-cells = <1>; device_type = "soc"; - ranges = <0 e0000000 00100000>; - reg = <e0000000 00000200>; + ranges = <0x0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00000200>; bus-frequency = <0>; wdt@200 { device_type = "watchdog"; compatible = "mpc83xx_wdt"; - reg = <200 100>; + reg = <0x200 0x100>; }; i2c@3000 { #address-cells = <1>; #size-cells = <0>; - device_type = "i2c"; + cell-index = <0>; compatible = "fsl-i2c"; - reg = <3000 100>; - interrupts = <e 8>; - interrupt-parent = < &ipic >; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; dfsrr; rtc@68 { compatible = "dallas,ds1374"; - reg = <68>; + reg = <0x68>; }; }; i2c@3100 { #address-cells = <1>; #size-cells = <0>; - device_type = "i2c"; + cell-index = <1>; compatible = "fsl-i2c"; - reg = <3100 100>; - interrupts = <f 8>; - interrupt-parent = < &ipic >; + reg = <0x3100 0x100>; + interrupts = <15 0x8>; + interrupt-parent = <&ipic>; dfsrr; }; spi@7000 { - device_type = "spi"; - compatible = "fsl_spi"; - reg = <7000 1000>; - interrupts = <10 8>; - interrupt-parent = < &ipic >; + cell-index = <0>; + compatible = "fsl,spi"; + reg = <0x7000 0x1000>; + interrupts = <16 0x8>; + interrupt-parent = <&ipic>; mode = "cpu"; }; - /* phy type (ULPI or SERIAL) are only types supportted for MPH */ + /* phy type (ULPI or SERIAL) are only types supported for MPH */ /* port = 0 or 1 */ usb@22000 { - device_type = "usb"; compatible = "fsl-usb2-mph"; - reg = <22000 1000>; + reg = <0x22000 0x1000>; #address-cells = <1>; #size-cells = <0>; - interrupt-parent = < &ipic >; - interrupts = <27 8>; + interrupt-parent = <&ipic>; + interrupts = <39 0x8>; phy_type = "ulpi"; port1; }; /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ usb@23000 { - device_type = "usb"; compatible = "fsl-usb2-dr"; - reg = <23000 1000>; + reg = <0x23000 0x1000>; #address-cells = <1>; #size-cells = <0>; - interrupt-parent = < &ipic >; - interrupts = <26 8>; + interrupt-parent = <&ipic>; + interrupts = <38 0x8>; dr_mode = "otg"; phy_type = "ulpi"; }; mdio@24520 { - device_type = "mdio"; - compatible = "gianfar"; - reg = <24520 20>; #address-cells = <1>; #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x24520 0x20>; + phy0: ethernet-phy@0 { - interrupt-parent = < &ipic >; - interrupts = <11 8>; - reg = <0>; + interrupt-parent = <&ipic>; + interrupts = <17 0x8>; + reg = <0x0>; device_type = "ethernet-phy"; }; phy1: ethernet-phy@1 { - interrupt-parent = < &ipic >; - interrupts = <12 8>; - reg = <1>; + interrupt-parent = <&ipic>; + interrupts = <18 0x8>; + reg = <0x1>; device_type = "ethernet-phy"; }; }; - ethernet@24000 { + enet0: ethernet@24000 { + cell-index = <0>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; - reg = <24000 1000>; - /* - * address is deprecated and will be removed - * in 2.6.25. Only recent versions of - * U-Boot support local-mac-address, however. - */ - address = [ 00 00 00 00 00 00 ]; + reg = <0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <20 8 21 8 22 8>; - interrupt-parent = < &ipic >; - phy-handle = < &phy0 >; + interrupts = <32 0x8 33 0x8 34 0x8>; + interrupt-parent = <&ipic>; + phy-handle = <&phy0>; linux,network-index = <0>; }; - ethernet@25000 { - #address-cells = <1>; - #size-cells = <0>; + enet1: ethernet@25000 { + cell-index = <1>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; - reg = <25000 1000>; - /* - * address is deprecated and will be removed - * in 2.6.25. Only recent versions of - * U-Boot support local-mac-address, however. - */ - address = [ 00 00 00 00 00 00 ]; + reg = <0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <23 8 24 8 25 8>; - interrupt-parent = < &ipic >; - phy-handle = < &phy1 >; + interrupts = <35 0x8 36 0x8 37 0x8>; + interrupt-parent = <&ipic>; + phy-handle = <&phy1>; linux,network-index = <1>; }; - serial@4500 { + serial0: serial@4500 { + cell-index = <0>; device_type = "serial"; compatible = "ns16550"; - reg = <4500 100>; + reg = <0x4500 0x100>; clock-frequency = <0>; - interrupts = <9 8>; - interrupt-parent = < &ipic >; + interrupts = <9 0x8>; + interrupt-parent = <&ipic>; }; - serial@4600 { + serial1: serial@4600 { + cell-index = <1>; device_type = "serial"; compatible = "ns16550"; - reg = <4600 100>; + reg = <0x4600 0x100>; clock-frequency = <0>; - interrupts = <a 8>; - interrupt-parent = < &ipic >; + interrupts = <10 0x8>; + interrupt-parent = <&ipic>; }; /* May need to remove if on a part without crypto engine */ @@ -199,15 +198,15 @@ device_type = "crypto"; model = "SEC2"; compatible = "talitos"; - reg = <30000 10000>; - interrupts = <b 8>; - interrupt-parent = < &ipic >; + reg = <0x30000 0x10000>; + interrupts = <11 0x8>; + interrupt-parent = <&ipic>; num-channels = <4>; - channel-fifo-len = <18>; - exec-units-mask = <0000007e>; + channel-fifo-len = <24>; + exec-units-mask = <0x0000007e>; /* desc mask is for rev2.0, * we need runtime fixup for >2.0 */ - descriptor-types-mask = <01010ebf>; + descriptor-types-mask = <0x01010ebf>; }; /* IPIC @@ -220,127 +219,129 @@ interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; - reg = <700 100>; + reg = <0x700 0x100>; device_type = "ipic"; }; }; - pci@e0008500 { - interrupt-map-mask = <f800 0 0 7>; + pci0: pci@e0008500 { + cell-index = <1>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x11 */ - 8800 0 0 1 &ipic 14 8 - 8800 0 0 2 &ipic 15 8 - 8800 0 0 3 &ipic 16 8 - 8800 0 0 4 &ipic 17 8 + 0x8800 0x0 0x0 0x1 &ipic 20 0x8 + 0x8800 0x0 0x0 0x2 &ipic 21 0x8 + 0x8800 0x0 0x0 0x3 &ipic 22 0x8 + 0x8800 0x0 0x0 0x4 &ipic 23 0x8 /* IDSEL 0x12 */ - 9000 0 0 1 &ipic 16 8 - 9000 0 0 2 &ipic 17 8 - 9000 0 0 3 &ipic 14 8 - 9000 0 0 4 &ipic 15 8 + 0x9000 0x0 0x0 0x1 &ipic 22 0x8 + 0x9000 0x0 0x0 0x2 &ipic 23 0x8 + 0x9000 0x0 0x0 0x3 &ipic 20 0x8 + 0x9000 0x0 0x0 0x4 &ipic 21 0x8 /* IDSEL 0x13 */ - 9800 0 0 1 &ipic 17 8 - 9800 0 0 2 &ipic 14 8 - 9800 0 0 3 &ipic 15 8 - 9800 0 0 4 &ipic 16 8 + 0x9800 0x0 0x0 0x1 &ipic 23 0x8 + 0x9800 0x0 0x0 0x2 &ipic 20 0x8 + 0x9800 0x0 0x0 0x3 &ipic 21 0x8 + 0x9800 0x0 0x0 0x4 &ipic 22 0x8 /* IDSEL 0x15 */ - a800 0 0 1 &ipic 14 8 - a800 0 0 2 &ipic 15 8 - a800 0 0 3 &ipic 16 8 - a800 0 0 4 &ipic 17 8 + 0xa800 0x0 0x0 0x1 &ipic 20 0x8 + 0xa800 0x0 0x0 0x2 &ipic 21 0x8 + 0xa800 0x0 0x0 0x3 &ipic 22 0x8 + 0xa800 0x0 0x0 0x4 &ipic 23 0x8 /* IDSEL 0x16 */ - b000 0 0 1 &ipic 17 8 - b000 0 0 2 &ipic 14 8 - b000 0 0 3 &ipic 15 8 - b000 0 0 4 &ipic 16 8 + 0xb000 0x0 0x0 0x1 &ipic 23 0x8 + 0xb000 0x0 0x0 0x2 &ipic 20 0x8 + 0xb000 0x0 0x0 0x3 &ipic 21 0x8 + 0xb000 0x0 0x0 0x4 &ipic 22 0x8 /* IDSEL 0x17 */ - b800 0 0 1 &ipic 16 8 - b800 0 0 2 &ipic 17 8 - b800 0 0 3 &ipic 14 8 - b800 0 0 4 &ipic 15 8 + 0xb800 0x0 0x0 0x1 &ipic 22 0x8 + 0xb800 0x0 0x0 0x2 &ipic 23 0x8 + 0xb800 0x0 0x0 0x3 &ipic 20 0x8 + 0xb800 0x0 0x0 0x4 &ipic 21 0x8 /* IDSEL 0x18 */ - c000 0 0 1 &ipic 15 8 - c000 0 0 2 &ipic 16 8 - c000 0 0 3 &ipic 17 8 - c000 0 0 4 &ipic 14 8>; - interrupt-parent = < &ipic >; - interrupts = <42 8>; + 0xc000 0x0 0x0 0x1 &ipic 21 0x8 + 0xc000 0x0 0x0 0x2 &ipic 22 0x8 + 0xc000 0x0 0x0 0x3 &ipic 23 0x8 + 0xc000 0x0 0x0 0x4 &ipic 20 0x8>; + interrupt-parent = <&ipic>; + interrupts = <66 0x8>; bus-range = <0 0>; - ranges = <02000000 0 90000000 90000000 0 10000000 - 42000000 0 80000000 80000000 0 10000000 - 01000000 0 00000000 e2000000 0 00100000>; - clock-frequency = <3f940aa>; + ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 + 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>; + clock-frequency = <66666666>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <e0008500 100>; + reg = <0xe0008500 0x100>; compatible = "fsl,mpc8349-pci"; device_type = "pci"; }; - pci@e0008600 { - interrupt-map-mask = <f800 0 0 7>; + pci1: pci@e0008600 { + cell-index = <2>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x11 */ - 8800 0 0 1 &ipic 14 8 - 8800 0 0 2 &ipic 15 8 - 8800 0 0 3 &ipic 16 8 - 8800 0 0 4 &ipic 17 8 + 0x8800 0x0 0x0 0x1 &ipic 20 0x8 + 0x8800 0x0 0x0 0x2 &ipic 21 0x8 + 0x8800 0x0 0x0 0x3 &ipic 22 0x8 + 0x8800 0x0 0x0 0x4 &ipic 23 0x8 /* IDSEL 0x12 */ - 9000 0 0 1 &ipic 16 8 - 9000 0 0 2 &ipic 17 8 - 9000 0 0 3 &ipic 14 8 - 9000 0 0 4 &ipic 15 8 + 0x9000 0x0 0x0 0x1 &ipic 22 0x8 + 0x9000 0x0 0x0 0x2 &ipic 23 0x8 + 0x9000 0x0 0x0 0x3 &ipic 20 0x8 + 0x9000 0x0 0x0 0x4 &ipic 21 0x8 /* IDSEL 0x13 */ - 9800 0 0 1 &ipic 17 8 - 9800 0 0 2 &ipic 14 8 - 9800 0 0 3 &ipic 15 8 - 9800 0 0 4 &ipic 16 8 + 0x9800 0x0 0x0 0x1 &ipic 23 0x8 + 0x9800 0x0 0x0 0x2 &ipic 20 0x8 + 0x9800 0x0 0x0 0x3 &ipic 21 0x8 + 0x9800 0x0 0x0 0x4 &ipic 22 0x8 /* IDSEL 0x15 */ - a800 0 0 1 &ipic 14 8 - a800 0 0 2 &ipic 15 8 - a800 0 0 3 &ipic 16 8 - a800 0 0 4 &ipic 17 8 + 0xa800 0x0 0x0 0x1 &ipic 20 0x8 + 0xa800 0x0 0x0 0x2 &ipic 21 0x8 + 0xa800 0x0 0x0 0x3 &ipic 22 0x8 + 0xa800 0x0 0x0 0x4 &ipic 23 0x8 /* IDSEL 0x16 */ - b000 0 0 1 &ipic 17 8 - b000 0 0 2 &ipic 14 8 - b000 0 0 3 &ipic 15 8 - b000 0 0 4 &ipic 16 8 + 0xb000 0x0 0x0 0x1 &ipic 23 0x8 + 0xb000 0x0 0x0 0x2 &ipic 20 0x8 + 0xb000 0x0 0x0 0x3 &ipic 21 0x8 + 0xb000 0x0 0x0 0x4 &ipic 22 0x8 /* IDSEL 0x17 */ - b800 0 0 1 &ipic 16 8 - b800 0 0 2 &ipic 17 8 - b800 0 0 3 &ipic 14 8 - b800 0 0 4 &ipic 15 8 + 0xb800 0x0 0x0 0x1 &ipic 22 0x8 + 0xb800 0x0 0x0 0x2 &ipic 23 0x8 + 0xb800 0x0 0x0 0x3 &ipic 20 0x8 + 0xb800 0x0 0x0 0x4 &ipic 21 0x8 /* IDSEL 0x18 */ - c000 0 0 1 &ipic 15 8 - c000 0 0 2 &ipic 16 8 - c000 0 0 3 &ipic 17 8 - c000 0 0 4 &ipic 14 8>; - interrupt-parent = < &ipic >; - interrupts = <42 8>; + 0xc000 0x0 0x0 0x1 &ipic 21 0x8 + 0xc000 0x0 0x0 0x2 &ipic 22 0x8 + 0xc000 0x0 0x0 0x3 &ipic 23 0x8 + 0xc000 0x0 0x0 0x4 &ipic 20 0x8>; + interrupt-parent = <&ipic>; + interrupts = <66 0x8>; bus-range = <0 0>; - ranges = <02000000 0 b0000000 b0000000 0 10000000 - 42000000 0 a0000000 a0000000 0 10000000 - 01000000 0 00000000 e2100000 0 00100000>; - clock-frequency = <3f940aa>; + ranges = <0x02000000 0x0 0xb0000000 0xb0000000 0x0 0x10000000 + 0x42000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe2100000 0x0 0x00100000>; + clock-frequency = <66666666>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <e0008600 100>; + reg = <0xe0008600 0x100>; compatible = "fsl,mpc8349-pci"; device_type = "pci"; }; diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts index 0b2d2b588da..55f03e8dc97 100644 --- a/arch/powerpc/boot/dts/mpc836x_mds.dts +++ b/arch/powerpc/boot/dts/mpc836x_mds.dts @@ -14,122 +14,134 @@ /memreserve/ 00000000 1000000; */ +/dts-v1/; + / { model = "MPC8360MDS"; compatible = "MPC8360EMDS", "MPC836xMDS", "MPC83xxMDS"; #address-cells = <1>; #size-cells = <1>; + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + cpus { #address-cells = <1>; #size-cells = <0>; PowerPC,8360@0 { device_type = "cpu"; - reg = <0>; - d-cache-line-size = <20>; // 32 bytes - i-cache-line-size = <20>; // 32 bytes - d-cache-size = <8000>; // L1, 32K - i-cache-size = <8000>; // L1, 32K - timebase-frequency = <3EF1480>; - bus-frequency = <FBC5200>; - clock-frequency = <1F78A400>; + reg = <0x0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <32768>; // L1, 32K + i-cache-size = <32768>; // L1, 32K + timebase-frequency = <66000000>; + bus-frequency = <264000000>; + clock-frequency = <528000000>; }; }; memory { device_type = "memory"; - reg = <00000000 10000000>; + reg = <0x00000000 0x10000000>; }; bcsr@f8000000 { device_type = "board-control"; - reg = <f8000000 8000>; + reg = <0xf8000000 0x8000>; }; soc8360@e0000000 { #address-cells = <1>; #size-cells = <1>; device_type = "soc"; - ranges = <0 e0000000 00100000>; - reg = <e0000000 00000200>; - bus-frequency = <FBC5200>; + ranges = <0x0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00000200>; + bus-frequency = <264000000>; wdt@200 { device_type = "watchdog"; compatible = "mpc83xx_wdt"; - reg = <200 100>; + reg = <0x200 0x100>; }; i2c@3000 { #address-cells = <1>; #size-cells = <0>; - device_type = "i2c"; + cell-index = <0>; compatible = "fsl-i2c"; - reg = <3000 100>; - interrupts = <e 8>; - interrupt-parent = < &ipic >; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; dfsrr; rtc@68 { compatible = "dallas,ds1374"; - reg = <68>; + reg = <0x68>; }; }; i2c@3100 { #address-cells = <1>; #size-cells = <0>; - device_type = "i2c"; + cell-index = <1>; compatible = "fsl-i2c"; - reg = <3100 100>; - interrupts = <f 8>; - interrupt-parent = < &ipic >; + reg = <0x3100 0x100>; + interrupts = <15 0x8>; + interrupt-parent = <&ipic>; dfsrr; }; - serial@4500 { + serial0: serial@4500 { + cell-index = <0>; device_type = "serial"; compatible = "ns16550"; - reg = <4500 100>; - clock-frequency = <FBC5200>; - interrupts = <9 8>; - interrupt-parent = < &ipic >; + reg = <0x4500 0x100>; + clock-frequency = <264000000>; + interrupts = <9 0x8>; + interrupt-parent = <&ipic>; }; - serial@4600 { + serial1: serial@4600 { + cell-index = <1>; device_type = "serial"; compatible = "ns16550"; - reg = <4600 100>; - clock-frequency = <FBC5200>; - interrupts = <a 8>; - interrupt-parent = < &ipic >; + reg = <0x4600 0x100>; + clock-frequency = <264000000>; + interrupts = <10 0x8>; + interrupt-parent = <&ipic>; }; crypto@30000 { device_type = "crypto"; model = "SEC2"; compatible = "talitos"; - reg = <30000 10000>; - interrupts = <b 8>; - interrupt-parent = < &ipic >; + reg = <0x30000 0x10000>; + interrupts = <11 0x8>; + interrupt-parent = <&ipic>; num-channels = <4>; - channel-fifo-len = <18>; - exec-units-mask = <0000007e>; + channel-fifo-len = <24>; + exec-units-mask = <0x0000007e>; /* desc mask is for rev1.x, we need runtime fixup for >=2.x */ - descriptor-types-mask = <01010ebf>; + descriptor-types-mask = <0x01010ebf>; }; ipic: pic@700 { interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; - reg = <700 100>; + reg = <0x700 0x100>; device_type = "ipic"; }; par_io@1400 { - reg = <1400 100>; + reg = <0x1400 0x100>; device_type = "par_io"; num-ports = <7>; @@ -143,19 +155,19 @@ 1 6 1 0 3 0 /* TxD4 */ 1 7 1 0 1 0 /* TxD5 */ 1 9 1 0 2 0 /* TxD6 */ - 1 a 1 0 2 0 /* TxD7 */ + 1 10 1 0 2 0 /* TxD7 */ 0 9 2 0 1 0 /* RxD0 */ - 0 a 2 0 1 0 /* RxD1 */ - 0 b 2 0 1 0 /* RxD2 */ - 0 c 2 0 1 0 /* RxD3 */ - 0 d 2 0 1 0 /* RxD4 */ + 0 10 2 0 1 0 /* RxD1 */ + 0 11 2 0 1 0 /* RxD2 */ + 0 12 2 0 1 0 /* RxD3 */ + 0 13 2 0 1 0 /* RxD4 */ 1 1 2 0 2 0 /* RxD5 */ 1 0 2 0 2 0 /* RxD6 */ 1 4 2 0 2 0 /* RxD7 */ 0 7 1 0 1 0 /* TX_EN */ 0 8 1 0 1 0 /* TX_ER */ - 0 f 2 0 1 0 /* RX_DV */ - 0 10 2 0 1 0 /* RX_ER */ + 0 15 2 0 1 0 /* RX_DV */ + 0 16 2 0 1 0 /* RX_ER */ 0 0 2 0 1 0 /* RX_CLK */ 2 9 1 0 3 0 /* GTX_CLK - CLK10 */ 2 8 2 0 1 0>; /* GTX125 - CLK9 */ @@ -163,27 +175,27 @@ pio2: ucc_pin@02 { pio-map = < /* port pin dir open_drain assignment has_irq */ - 0 11 1 0 1 0 /* TxD0 */ - 0 12 1 0 1 0 /* TxD1 */ - 0 13 1 0 1 0 /* TxD2 */ - 0 14 1 0 1 0 /* TxD3 */ + 0 17 1 0 1 0 /* TxD0 */ + 0 18 1 0 1 0 /* TxD1 */ + 0 19 1 0 1 0 /* TxD2 */ + 0 20 1 0 1 0 /* TxD3 */ 1 2 1 0 1 0 /* TxD4 */ 1 3 1 0 2 0 /* TxD5 */ 1 5 1 0 3 0 /* TxD6 */ 1 8 1 0 3 0 /* TxD7 */ - 0 17 2 0 1 0 /* RxD0 */ - 0 18 2 0 1 0 /* RxD1 */ - 0 19 2 0 1 0 /* RxD2 */ - 0 1a 2 0 1 0 /* RxD3 */ - 0 1b 2 0 1 0 /* RxD4 */ - 1 c 2 0 2 0 /* RxD5 */ - 1 d 2 0 3 0 /* RxD6 */ - 1 b 2 0 2 0 /* RxD7 */ - 0 15 1 0 1 0 /* TX_EN */ - 0 16 1 0 1 0 /* TX_ER */ - 0 1d 2 0 1 0 /* RX_DV */ - 0 1e 2 0 1 0 /* RX_ER */ - 0 1f 2 0 1 0 /* RX_CLK */ + 0 23 2 0 1 0 /* RxD0 */ + 0 24 2 0 1 0 /* RxD1 */ + 0 25 2 0 1 0 /* RxD2 */ + 0 26 2 0 1 0 /* RxD3 */ + 0 27 2 0 1 0 /* RxD4 */ + 1 12 2 0 2 0 /* RxD5 */ + 1 13 2 0 3 0 /* RxD6 */ + 1 11 2 0 2 0 /* RxD7 */ + 0 21 1 0 1 0 /* TX_EN */ + 0 22 1 0 1 0 /* TX_ER */ + 0 29 2 0 1 0 /* RX_DV */ + 0 30 2 0 1 0 /* RX_ER */ + 0 31 2 0 1 0 /* RX_CLK */ 2 2 1 0 2 0 /* GTX_CLK - CLK10 */ 2 3 2 0 1 0 /* GTX125 - CLK4 */ 0 1 3 0 2 0 /* MDIO */ @@ -197,181 +209,174 @@ #address-cells = <1>; #size-cells = <1>; device_type = "qe"; - model = "QE"; - ranges = <0 e0100000 00100000>; - reg = <e0100000 480>; + compatible = "fsl,qe"; + ranges = <0x0 0xe0100000 0x00100000>; + reg = <0xe0100000 0x480>; brg-frequency = <0>; - bus-frequency = <179A7B00>; + bus-frequency = <396000000>; muram@10000 { - device_type = "muram"; - ranges = <0 00010000 0000c000>; - - data-only@0{ - reg = <0 c000>; + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,qe-muram", "fsl,cpm-muram"; + ranges = <0x0 0x00010000 0x0000c000>; + + data-only@0 { + compatible = "fsl,qe-muram-data", + "fsl,cpm-muram-data"; + reg = <0x0 0xc000>; }; }; spi@4c0 { - device_type = "spi"; - compatible = "fsl_spi"; - reg = <4c0 40>; + cell-index = <0>; + compatible = "fsl,spi"; + reg = <0x4c0 0x40>; interrupts = <2>; - interrupt-parent = < &qeic >; + interrupt-parent = <&qeic>; mode = "cpu"; }; spi@500 { - device_type = "spi"; - compatible = "fsl_spi"; - reg = <500 40>; + cell-index = <1>; + compatible = "fsl,spi"; + reg = <0x500 0x40>; interrupts = <1>; - interrupt-parent = < &qeic >; + interrupt-parent = <&qeic>; mode = "cpu"; }; usb@6c0 { - device_type = "usb"; compatible = "qe_udc"; - reg = <6c0 40 8B00 100>; - interrupts = <b>; - interrupt-parent = < &qeic >; + reg = <0x6c0 0x40 0x8b00 0x100>; + interrupts = <11>; + interrupt-parent = <&qeic>; mode = "slave"; }; - ucc@2000 { + enet0: ucc@2000 { device_type = "network"; compatible = "ucc_geth"; model = "UCC"; + cell-index = <1>; device-id = <1>; - reg = <2000 200>; - interrupts = <20>; - interrupt-parent = < &qeic >; - /* - * mac-address is deprecated and will be removed - * in 2.6.25. Only recent versions of - * U-Boot support local-mac-address, however. - */ - mac-address = [ 00 00 00 00 00 00 ]; + reg = <0x2000 0x200>; + interrupts = <32>; + interrupt-parent = <&qeic>; local-mac-address = [ 00 00 00 00 00 00 ]; - rx-clock = <0>; - tx-clock = <19>; - phy-handle = < &phy0 >; + rx-clock-name = "none"; + tx-clock-name = "clk9"; + phy-handle = <&phy0>; phy-connection-type = "rgmii-id"; - pio-handle = < &pio1 >; + pio-handle = <&pio1>; }; - ucc@3000 { + enet1: ucc@3000 { device_type = "network"; compatible = "ucc_geth"; model = "UCC"; + cell-index = <2>; device-id = <2>; - reg = <3000 200>; - interrupts = <21>; - interrupt-parent = < &qeic >; - /* - * mac-address is deprecated and will be removed - * in 2.6.25. Only recent versions of - * U-Boot support local-mac-address, however. - */ - mac-address = [ 00 00 00 00 00 00 ]; + reg = <0x3000 0x200>; + interrupts = <33>; + interrupt-parent = <&qeic>; local-mac-address = [ 00 00 00 00 00 00 ]; - rx-clock = <0>; - tx-clock = <14>; - phy-handle = < &phy1 >; + rx-clock-name = "none"; + tx-clock-name = "clk4"; + phy-handle = <&phy1>; phy-connection-type = "rgmii-id"; - pio-handle = < &pio2 >; + pio-handle = <&pio2>; }; mdio@2120 { #address-cells = <1>; #size-cells = <0>; - reg = <2120 18>; - device_type = "mdio"; - compatible = "ucc_geth_phy"; + reg = <0x2120 0x18>; + compatible = "fsl,ucc-mdio"; phy0: ethernet-phy@00 { - interrupt-parent = < &ipic >; - interrupts = <11 8>; - reg = <0>; + interrupt-parent = <&ipic>; + interrupts = <17 0x8>; + reg = <0x0>; device_type = "ethernet-phy"; }; phy1: ethernet-phy@01 { - interrupt-parent = < &ipic >; - interrupts = <12 8>; - reg = <1>; + interrupt-parent = <&ipic>; + interrupts = <18 0x8>; + reg = <0x1>; device_type = "ethernet-phy"; }; }; - qeic: qeic@80 { + qeic: interrupt-controller@80 { interrupt-controller; - device_type = "qeic"; + compatible = "fsl,qe-ic"; #address-cells = <0>; #interrupt-cells = <1>; - reg = <80 80>; + reg = <0x80 0x80>; big-endian; - interrupts = <20 8 21 8>; //high:32 low:33 - interrupt-parent = < &ipic >; + interrupts = <32 0x8 33 0x8>; // high:32 low:33 + interrupt-parent = <&ipic>; }; }; - pci@e0008500 { - interrupt-map-mask = <f800 0 0 7>; + pci0: pci@e0008500 { + cell-index = <1>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x11 AD17 */ - 8800 0 0 1 &ipic 14 8 - 8800 0 0 2 &ipic 15 8 - 8800 0 0 3 &ipic 16 8 - 8800 0 0 4 &ipic 17 8 + 0x8800 0x0 0x0 0x1 &ipic 20 0x8 + 0x8800 0x0 0x0 0x2 &ipic 21 0x8 + 0x8800 0x0 0x0 0x3 &ipic 22 0x8 + 0x8800 0x0 0x0 0x4 &ipic 23 0x8 /* IDSEL 0x12 AD18 */ - 9000 0 0 1 &ipic 16 8 - 9000 0 0 2 &ipic 17 8 - 9000 0 0 3 &ipic 14 8 - 9000 0 0 4 &ipic 15 8 + 0x9000 0x0 0x0 0x1 &ipic 22 0x8 + 0x9000 0x0 0x0 0x2 &ipic 23 0x8 + 0x9000 0x0 0x0 0x3 &ipic 20 0x8 + 0x9000 0x0 0x0 0x4 &ipic 21 0x8 /* IDSEL 0x13 AD19 */ - 9800 0 0 1 &ipic 17 8 - 9800 0 0 2 &ipic 14 8 - 9800 0 0 3 &ipic 15 8 - 9800 0 0 4 &ipic 16 8 + 0x9800 0x0 0x0 0x1 &ipic 23 0x8 + 0x9800 0x0 0x0 0x2 &ipic 20 0x8 + 0x9800 0x0 0x0 0x3 &ipic 21 0x8 + 0x9800 0x0 0x0 0x4 &ipic 22 0x8 /* IDSEL 0x15 AD21*/ - a800 0 0 1 &ipic 14 8 - a800 0 0 2 &ipic 15 8 - a800 0 0 3 &ipic 16 8 - a800 0 0 4 &ipic 17 8 + 0xa800 0x0 0x0 0x1 &ipic 20 0x8 + 0xa800 0x0 0x0 0x2 &ipic 21 0x8 + 0xa800 0x0 0x0 0x3 &ipic 22 0x8 + 0xa800 0x0 0x0 0x4 &ipic 23 0x8 /* IDSEL 0x16 AD22*/ - b000 0 0 1 &ipic 17 8 - b000 0 0 2 &ipic 14 8 - b000 0 0 3 &ipic 15 8 - b000 0 0 4 &ipic 16 8 + 0xb000 0x0 0x0 0x1 &ipic 23 0x8 + 0xb000 0x0 0x0 0x2 &ipic 20 0x8 + 0xb000 0x0 0x0 0x3 &ipic 21 0x8 + 0xb000 0x0 0x0 0x4 &ipic 22 0x8 /* IDSEL 0x17 AD23*/ - b800 0 0 1 &ipic 16 8 - b800 0 0 2 &ipic 17 8 - b800 0 0 3 &ipic 14 8 - b800 0 0 4 &ipic 15 8 + 0xb800 0x0 0x0 0x1 &ipic 22 0x8 + 0xb800 0x0 0x0 0x2 &ipic 23 0x8 + 0xb800 0x0 0x0 0x3 &ipic 20 0x8 + 0xb800 0x0 0x0 0x4 &ipic 21 0x8 /* IDSEL 0x18 AD24*/ - c000 0 0 1 &ipic 15 8 - c000 0 0 2 &ipic 16 8 - c000 0 0 3 &ipic 17 8 - c000 0 0 4 &ipic 14 8>; - interrupt-parent = < &ipic >; - interrupts = <42 8>; + 0xc000 0x0 0x0 0x1 &ipic 21 0x8 + 0xc000 0x0 0x0 0x2 &ipic 22 0x8 + 0xc000 0x0 0x0 0x3 &ipic 23 0x8 + 0xc000 0x0 0x0 0x4 &ipic 20 0x8>; + interrupt-parent = <&ipic>; + interrupts = <66 0x8>; bus-range = <0 0>; - ranges = <02000000 0 a0000000 a0000000 0 10000000 - 42000000 0 80000000 80000000 0 10000000 - 01000000 0 00000000 e2000000 0 00100000>; - clock-frequency = <3f940aa>; + ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000 + 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>; + clock-frequency = <66666666>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <e0008500 100>; + reg = <0xe0008500 0x100>; compatible = "fsl,mpc8349-pci"; device_type = "pci"; }; diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts new file mode 100644 index 00000000000..a3637fff73c --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8377_mds.dts @@ -0,0 +1,280 @@ +/* + * MPC8377E MDS Device Tree Source + * + * Copyright 2007 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "fsl,mpc8377emds"; + compatible = "fsl,mpc8377emds","fsl,mpc837xmds"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8377@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; // 512MB at 0 + }; + + soc@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0x0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00000200>; + bus-frequency = <0>; + + wdt@200 { + compatible = "mpc83xx_wdt"; + reg = <0x200 0x100>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <15 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + }; + + spi@7000 { + cell-index = <0>; + compatible = "fsl,spi"; + reg = <0x7000 0x1000>; + interrupts = <16 0x8>; + interrupt-parent = <&ipic>; + mode = "cpu"; + }; + + /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ + usb@23000 { + compatible = "fsl-usb2-dr"; + reg = <0x23000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&ipic>; + interrupts = <38 0x8>; + phy_type = "utmi_wide"; + }; + + mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x24520 0x20>; + phy2: ethernet-phy@2 { + interrupt-parent = <&ipic>; + interrupts = <17 0x8>; + reg = <0x2>; + device_type = "ethernet-phy"; + }; + phy3: ethernet-phy@3 { + interrupt-parent = <&ipic>; + interrupts = <18 0x8>; + reg = <0x3>; + device_type = "ethernet-phy"; + }; + }; + + enet0: ethernet@24000 { + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <32 0x8 33 0x8 34 0x8>; + phy-connection-type = "mii"; + interrupt-parent = <&ipic>; + phy-handle = <&phy2>; + }; + + enet1: ethernet@25000 { + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 0x8 36 0x8 37 0x8>; + phy-connection-type = "mii"; + interrupt-parent = <&ipic>; + phy-handle = <&phy3>; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <9 0x8>; + interrupt-parent = <&ipic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <10 0x8>; + interrupt-parent = <&ipic>; + }; + + crypto@30000 { + model = "SEC3"; + compatible = "talitos"; + reg = <0x30000 0x10000>; + interrupts = <11 0x8>; + interrupt-parent = <&ipic>; + /* Rev. 3.0 geometry */ + num-channels = <4>; + channel-fifo-len = <24>; + exec-units-mask = <0x000001fe>; + descriptor-types-mask = <0x03ab0ebf>; + }; + + sdhc@2e000 { + model = "eSDHC"; + compatible = "fsl,esdhc"; + reg = <0x2e000 0x1000>; + interrupts = <42 0x8>; + interrupt-parent = <&ipic>; + }; + + sata@18000 { + compatible = "fsl,mpc8379-sata"; + reg = <0x18000 0x1000>; + interrupts = <44 0x8>; + interrupt-parent = <&ipic>; + }; + + sata@19000 { + compatible = "fsl,mpc8379-sata"; + reg = <0x19000 0x1000>; + interrupts = <45 0x8>; + interrupt-parent = <&ipic>; + }; + + /* IPIC + * interrupts cell = <intr #, sense> + * sense values match linux IORESOURCE_IRQ_* defines: + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + ipic: pic@700 { + compatible = "fsl,ipic"; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x700 0x100>; + }; + }; + + pci0: pci@e0008500 { + cell-index = <0>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x11 */ + 0x8800 0x0 0x0 0x1 &ipic 20 0x8 + 0x8800 0x0 0x0 0x2 &ipic 21 0x8 + 0x8800 0x0 0x0 0x3 &ipic 22 0x8 + 0x8800 0x0 0x0 0x4 &ipic 23 0x8 + + /* IDSEL 0x12 */ + 0x9000 0x0 0x0 0x1 &ipic 22 0x8 + 0x9000 0x0 0x0 0x2 &ipic 23 0x8 + 0x9000 0x0 0x0 0x3 &ipic 20 0x8 + 0x9000 0x0 0x0 0x4 &ipic 21 0x8 + + /* IDSEL 0x13 */ + 0x9800 0x0 0x0 0x1 &ipic 23 0x8 + 0x9800 0x0 0x0 0x2 &ipic 20 0x8 + 0x9800 0x0 0x0 0x3 &ipic 21 0x8 + 0x9800 0x0 0x0 0x4 &ipic 22 0x8 + + /* IDSEL 0x15 */ + 0xa800 0x0 0x0 0x1 &ipic 20 0x8 + 0xa800 0x0 0x0 0x2 &ipic 21 0x8 + 0xa800 0x0 0x0 0x3 &ipic 22 0x8 + 0xa800 0x0 0x0 0x4 &ipic 23 0x8 + + /* IDSEL 0x16 */ + 0xb000 0x0 0x0 0x1 &ipic 23 0x8 + 0xb000 0x0 0x0 0x2 &ipic 20 0x8 + 0xb000 0x0 0x0 0x3 &ipic 21 0x8 + 0xb000 0x0 0x0 0x4 &ipic 22 0x8 + + /* IDSEL 0x17 */ + 0xb800 0x0 0x0 0x1 &ipic 22 0x8 + 0xb800 0x0 0x0 0x2 &ipic 23 0x8 + 0xb800 0x0 0x0 0x3 &ipic 20 0x8 + 0xb800 0x0 0x0 0x4 &ipic 21 0x8 + + /* IDSEL 0x18 */ + 0xc000 0x0 0x0 0x1 &ipic 21 0x8 + 0xc000 0x0 0x0 0x2 &ipic 22 0x8 + 0xc000 0x0 0x0 0x3 &ipic 23 0x8 + 0xc000 0x0 0x0 0x4 &ipic 20 0x8>; + interrupt-parent = <&ipic>; + interrupts = <66 0x8>; + bus-range = <0x0 0x0>; + ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 + 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>; + clock-frequency = <0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008500 0x100>; + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts new file mode 100644 index 00000000000..440aa4dfab0 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts @@ -0,0 +1,296 @@ +/* + * MPC8377E RDB Device Tree Source + * + * Copyright 2007, 2008 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + compatible = "fsl,mpc8377rdb"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8377@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; // 256MB at 0 + }; + + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8377-elbc", "fsl,elbc", "simple-bus"; + reg = <0xe0005000 0x1000>; + interrupts = <77 0x8>; + interrupt-parent = <&ipic>; + + // CS0 and CS1 are swapped when + // booting from nand, but the + // addresses are the same. + ranges = <0x0 0x0 0xfe000000 0x00800000 + 0x1 0x0 0xe0600000 0x00008000 + 0x2 0x0 0xf0000000 0x00020000 + 0x3 0x0 0xfa000000 0x00008000>; + + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x800000>; + bank-width = <2>; + device-width = <1>; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8377-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x8000>; + + u-boot@0 { + reg = <0x0 0x100000>; + read-only; + }; + + kernel@100000 { + reg = <0x100000 0x300000>; + }; + fs@400000 { + reg = <0x400000 0x1c00000>; + }; + }; + }; + + immr@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + ranges = <0x0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00000200>; + bus-frequency = <0>; + + wdt@200 { + device_type = "watchdog"; + compatible = "mpc83xx_wdt"; + reg = <0x200 0x100>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + rtc@68 { + device_type = "rtc"; + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <15 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + }; + + spi@7000 { + cell-index = <0>; + compatible = "fsl,spi"; + reg = <0x7000 0x1000>; + interrupts = <16 0x8>; + interrupt-parent = <&ipic>; + mode = "cpu"; + }; + + /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ + usb@23000 { + compatible = "fsl-usb2-dr"; + reg = <0x23000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&ipic>; + interrupts = <38 0x8>; + phy_type = "utmi"; + }; + + mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x24520 0x20>; + phy2: ethernet-phy@2 { + interrupt-parent = <&ipic>; + interrupts = <17 0x8>; + reg = <0x2>; + device_type = "ethernet-phy"; + }; + phy3: ethernet-phy@3 { + interrupt-parent = <&ipic>; + interrupts = <18 0x8>; + reg = <0x3>; + device_type = "ethernet-phy"; + }; + }; + + enet0: ethernet@24000 { + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <32 0x8 33 0x8 34 0x8>; + phy-connection-type = "mii"; + interrupt-parent = <&ipic>; + phy-handle = <&phy2>; + }; + + enet1: ethernet@25000 { + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 0x8 36 0x8 37 0x8>; + phy-connection-type = "mii"; + interrupt-parent = <&ipic>; + phy-handle = <&phy3>; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <9 0x8>; + interrupt-parent = <&ipic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <10 0x8>; + interrupt-parent = <&ipic>; + }; + + crypto@30000 { + model = "SEC3"; + device_type = "crypto"; + compatible = "talitos"; + reg = <0x30000 0x10000>; + interrupts = <11 0x8>; + interrupt-parent = <&ipic>; + /* Rev. 3.0 geometry */ + num-channels = <4>; + channel-fifo-len = <24>; + exec-units-mask = <0x000001fe>; + descriptor-types-mask = <0x03ab0ebf>; + }; + + sata@18000 { + compatible = "fsl,mpc8377-sata", "fsl,pq-sata"; + reg = <0x18000 0x1000>; + interrupts = <44 0x8>; + interrupt-parent = <&ipic>; + }; + + sata@19000 { + compatible = "fsl,mpc8377-sata", "fsl,pq-sata"; + reg = <0x19000 0x1000>; + interrupts = <45 0x8>; + interrupt-parent = <&ipic>; + }; + + /* IPIC + * interrupts cell = <intr #, sense> + * sense values match linux IORESOURCE_IRQ_* defines: + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + ipic: interrupt-controller@700 { + compatible = "fsl,ipic"; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x700 0x100>; + }; + }; + + pci0: pci@e0008500 { + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */ + + /* IDSEL AD14 IRQ6 inta */ + 0x7000 0x0 0x0 0x1 &ipic 22 0x8 + + /* IDSEL AD15 IRQ5 inta, IRQ6 intb, IRQ7 intd */ + 0x7800 0x0 0x0 0x1 &ipic 21 0x8 + 0x7800 0x0 0x0 0x2 &ipic 22 0x8 + 0x7800 0x0 0x0 0x4 &ipic 23 0x8 + + /* IDSEL AD28 IRQ7 inta, IRQ5 intb IRQ6 intc*/ + 0xE000 0x0 0x0 0x1 &ipic 23 0x8 + 0xE000 0x0 0x0 0x2 &ipic 21 0x8 + 0xE000 0x0 0x0 0x3 &ipic 22 0x8>; + interrupt-parent = <&ipic>; + interrupts = <66 0x8>; + bus-range = <0 0>; + ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 + 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>; + clock-frequency = <66666666>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008500 0x100>; + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8378_mds.dts b/arch/powerpc/boot/dts/mpc8378_mds.dts new file mode 100644 index 00000000000..533e9b06cc8 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8378_mds.dts @@ -0,0 +1,266 @@ +/* + * MPC8378E MDS Device Tree Source + * + * Copyright 2007 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "fsl,mpc8378emds"; + compatible = "fsl,mpc8378emds","fsl,mpc837xmds"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8378@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; // 512MB at 0 + }; + + soc@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0x0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00000200>; + bus-frequency = <0>; + + wdt@200 { + compatible = "mpc83xx_wdt"; + reg = <0x200 0x100>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <15 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + }; + + spi@7000 { + cell-index = <0>; + compatible = "fsl,spi"; + reg = <0x7000 0x1000>; + interrupts = <16 0x8>; + interrupt-parent = <&ipic>; + mode = "cpu"; + }; + + /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ + usb@23000 { + compatible = "fsl-usb2-dr"; + reg = <0x23000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&ipic>; + interrupts = <38 0x8>; + phy_type = "utmi_wide"; + }; + + mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x24520 0x20>; + phy2: ethernet-phy@2 { + interrupt-parent = <&ipic>; + interrupts = <17 0x8>; + reg = <0x2>; + device_type = "ethernet-phy"; + }; + phy3: ethernet-phy@3 { + interrupt-parent = <&ipic>; + interrupts = <18 0x8>; + reg = <0x3>; + device_type = "ethernet-phy"; + }; + }; + + enet0: ethernet@24000 { + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <32 0x8 33 0x8 34 0x8>; + phy-connection-type = "mii"; + interrupt-parent = <&ipic>; + phy-handle = <&phy2>; + }; + + enet1: ethernet@25000 { + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 0x8 36 0x8 37 0x8>; + phy-connection-type = "mii"; + interrupt-parent = <&ipic>; + phy-handle = <&phy3>; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <9 0x8>; + interrupt-parent = <&ipic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <10 0x8>; + interrupt-parent = <&ipic>; + }; + + crypto@30000 { + model = "SEC3"; + compatible = "talitos"; + reg = <0x30000 0x10000>; + interrupts = <11 0x8>; + interrupt-parent = <&ipic>; + /* Rev. 3.0 geometry */ + num-channels = <4>; + channel-fifo-len = <24>; + exec-units-mask = <0x000001fe>; + descriptor-types-mask = <0x03ab0ebf>; + }; + + sdhc@2e000 { + model = "eSDHC"; + compatible = "fsl,esdhc"; + reg = <0x2e000 0x1000>; + interrupts = <42 0x8>; + interrupt-parent = <&ipic>; + }; + + /* IPIC + * interrupts cell = <intr #, sense> + * sense values match linux IORESOURCE_IRQ_* defines: + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + ipic: pic@700 { + compatible = "fsl,ipic"; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x700 0x100>; + }; + }; + + pci0: pci@e0008500 { + cell-index = <0>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x11 */ + 0x8800 0x0 0x0 0x1 &ipic 20 0x8 + 0x8800 0x0 0x0 0x2 &ipic 21 0x8 + 0x8800 0x0 0x0 0x3 &ipic 22 0x8 + 0x8800 0x0 0x0 0x4 &ipic 23 0x8 + + /* IDSEL 0x12 */ + 0x9000 0x0 0x0 0x1 &ipic 22 0x8 + 0x9000 0x0 0x0 0x2 &ipic 23 0x8 + 0x9000 0x0 0x0 0x3 &ipic 20 0x8 + 0x9000 0x0 0x0 0x4 &ipic 21 0x8 + + /* IDSEL 0x13 */ + 0x9800 0x0 0x0 0x1 &ipic 23 0x8 + 0x9800 0x0 0x0 0x2 &ipic 20 0x8 + 0x9800 0x0 0x0 0x3 &ipic 21 0x8 + 0x9800 0x0 0x0 0x4 &ipic 22 0x8 + + /* IDSEL 0x15 */ + 0xa800 0x0 0x0 0x1 &ipic 20 0x8 + 0xa800 0x0 0x0 0x2 &ipic 21 0x8 + 0xa800 0x0 0x0 0x3 &ipic 22 0x8 + 0xa800 0x0 0x0 0x4 &ipic 23 0x8 + + /* IDSEL 0x16 */ + 0xb000 0x0 0x0 0x1 &ipic 23 0x8 + 0xb000 0x0 0x0 0x2 &ipic 20 0x8 + 0xb000 0x0 0x0 0x3 &ipic 21 0x8 + 0xb000 0x0 0x0 0x4 &ipic 22 0x8 + + /* IDSEL 0x17 */ + 0xb800 0x0 0x0 0x1 &ipic 22 0x8 + 0xb800 0x0 0x0 0x2 &ipic 23 0x8 + 0xb800 0x0 0x0 0x3 &ipic 20 0x8 + 0xb800 0x0 0x0 0x4 &ipic 21 0x8 + + /* IDSEL 0x18 */ + 0xc000 0x0 0x0 0x1 &ipic 21 0x8 + 0xc000 0x0 0x0 0x2 &ipic 22 0x8 + 0xc000 0x0 0x0 0x3 &ipic 23 0x8 + 0xc000 0x0 0x0 0x4 &ipic 20 0x8>; + interrupt-parent = <&ipic>; + interrupts = <66 0x8>; + bus-range = <0x0 0x0>; + ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 + 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>; + clock-frequency = <0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008500 0x100>; + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts new file mode 100644 index 00000000000..92711534b17 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts @@ -0,0 +1,282 @@ +/* + * MPC8378E RDB Device Tree Source + * + * Copyright 2007, 2008 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + compatible = "fsl,mpc8378rdb"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8378@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; // 256MB at 0 + }; + + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8378-elbc", "fsl,elbc", "simple-bus"; + reg = <0xe0005000 0x1000>; + interrupts = <77 0x8>; + interrupt-parent = <&ipic>; + + // CS0 and CS1 are swapped when + // booting from nand, but the + // addresses are the same. + ranges = <0x0 0x0 0xfe000000 0x00800000 + 0x1 0x0 0xe0600000 0x00008000 + 0x2 0x0 0xf0000000 0x00020000 + 0x3 0x0 0xfa000000 0x00008000>; + + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x800000>; + bank-width = <2>; + device-width = <1>; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8378-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x8000>; + + u-boot@0 { + reg = <0x0 0x100000>; + read-only; + }; + + kernel@100000 { + reg = <0x100000 0x300000>; + }; + fs@400000 { + reg = <0x400000 0x1c00000>; + }; + }; + }; + + immr@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + ranges = <0x0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00000200>; + bus-frequency = <0>; + + wdt@200 { + device_type = "watchdog"; + compatible = "mpc83xx_wdt"; + reg = <0x200 0x100>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + rtc@68 { + device_type = "rtc"; + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <15 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + }; + + spi@7000 { + cell-index = <0>; + compatible = "fsl,spi"; + reg = <0x7000 0x1000>; + interrupts = <16 0x8>; + interrupt-parent = <&ipic>; + mode = "cpu"; + }; + + /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ + usb@23000 { + compatible = "fsl-usb2-dr"; + reg = <0x23000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&ipic>; + interrupts = <38 0x8>; + phy_type = "utmi"; + }; + + mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x24520 0x20>; + phy2: ethernet-phy@2 { + interrupt-parent = <&ipic>; + interrupts = <17 0x8>; + reg = <0x2>; + device_type = "ethernet-phy"; + }; + phy3: ethernet-phy@3 { + interrupt-parent = <&ipic>; + interrupts = <18 0x8>; + reg = <0x3>; + device_type = "ethernet-phy"; + }; + }; + + enet0: ethernet@24000 { + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <32 0x8 33 0x8 34 0x8>; + phy-connection-type = "mii"; + interrupt-parent = <&ipic>; + phy-handle = <&phy2>; + }; + + enet1: ethernet@25000 { + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 0x8 36 0x8 37 0x8>; + phy-connection-type = "mii"; + interrupt-parent = <&ipic>; + phy-handle = <&phy3>; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <9 0x8>; + interrupt-parent = <&ipic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <10 0x8>; + interrupt-parent = <&ipic>; + }; + + crypto@30000 { + model = "SEC3"; + device_type = "crypto"; + compatible = "talitos"; + reg = <0x30000 0x10000>; + interrupts = <11 0x8>; + interrupt-parent = <&ipic>; + /* Rev. 3.0 geometry */ + num-channels = <4>; + channel-fifo-len = <24>; + exec-units-mask = <0x000001fe>; + descriptor-types-mask = <0x03ab0ebf>; + }; + + /* IPIC + * interrupts cell = <intr #, sense> + * sense values match linux IORESOURCE_IRQ_* defines: + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + ipic: interrupt-controller@700 { + compatible = "fsl,ipic"; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x700 0x100>; + }; + }; + + pci0: pci@e0008500 { + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */ + + /* IDSEL AD14 IRQ6 inta */ + 0x7000 0x0 0x0 0x1 &ipic 22 0x8 + + /* IDSEL AD15 IRQ5 inta, IRQ6 intb, IRQ7 intd */ + 0x7800 0x0 0x0 0x1 &ipic 21 0x8 + 0x7800 0x0 0x0 0x2 &ipic 22 0x8 + 0x7800 0x0 0x0 0x4 &ipic 23 0x8 + + /* IDSEL AD28 IRQ7 inta, IRQ5 intb IRQ6 intc*/ + 0xE000 0x0 0x0 0x1 &ipic 23 0x8 + 0xE000 0x0 0x0 0x2 &ipic 21 0x8 + 0xE000 0x0 0x0 0x3 &ipic 22 0x8>; + interrupt-parent = <&ipic>; + interrupts = <66 0x8>; + bus-range = <0 0>; + ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 + 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>; + clock-frequency = <66666666>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008500 0x100>; + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts new file mode 100644 index 00000000000..c270685bbde --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8379_mds.dts @@ -0,0 +1,294 @@ +/* + * MPC8379E MDS Device Tree Source + * + * Copyright 2007 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "fsl,mpc8379emds"; + compatible = "fsl,mpc8379emds","fsl,mpc837xmds"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8379@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; // 512MB at 0 + }; + + soc@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0x0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00000200>; + bus-frequency = <0>; + + wdt@200 { + compatible = "mpc83xx_wdt"; + reg = <0x200 0x100>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <15 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + }; + + spi@7000 { + cell-index = <0>; + compatible = "fsl,spi"; + reg = <0x7000 0x1000>; + interrupts = <16 0x8>; + interrupt-parent = <&ipic>; + mode = "cpu"; + }; + + /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ + usb@23000 { + compatible = "fsl-usb2-dr"; + reg = <0x23000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&ipic>; + interrupts = <38 0x8>; + phy_type = "utmi_wide"; + }; + + mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x24520 0x20>; + phy2: ethernet-phy@2 { + interrupt-parent = <&ipic>; + interrupts = <17 0x8>; + reg = <0x2>; + device_type = "ethernet-phy"; + }; + phy3: ethernet-phy@3 { + interrupt-parent = <&ipic>; + interrupts = <18 0x8>; + reg = <0x3>; + device_type = "ethernet-phy"; + }; + }; + + enet0: ethernet@24000 { + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <32 0x8 33 0x8 34 0x8>; + phy-connection-type = "mii"; + interrupt-parent = <&ipic>; + phy-handle = <&phy2>; + }; + + enet1: ethernet@25000 { + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 0x8 36 0x8 37 0x8>; + phy-connection-type = "mii"; + interrupt-parent = <&ipic>; + phy-handle = <&phy3>; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <9 0x8>; + interrupt-parent = <&ipic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <10 0x8>; + interrupt-parent = <&ipic>; + }; + + crypto@30000 { + model = "SEC3"; + compatible = "talitos"; + reg = <0x30000 0x10000>; + interrupts = <11 0x8>; + interrupt-parent = <&ipic>; + /* Rev. 3.0 geometry */ + num-channels = <4>; + channel-fifo-len = <24>; + exec-units-mask = <0x000001fe>; + descriptor-types-mask = <0x03ab0ebf>; + }; + + sdhc@2e000 { + model = "eSDHC"; + compatible = "fsl,esdhc"; + reg = <0x2e000 0x1000>; + interrupts = <42 0x8>; + interrupt-parent = <&ipic>; + }; + + sata@18000 { + compatible = "fsl,mpc8379-sata"; + reg = <0x18000 0x1000>; + interrupts = <44 0x8>; + interrupt-parent = <&ipic>; + }; + + sata@19000 { + compatible = "fsl,mpc8379-sata"; + reg = <0x19000 0x1000>; + interrupts = <45 0x8>; + interrupt-parent = <&ipic>; + }; + + sata@1a000 { + compatible = "fsl,mpc8379-sata"; + reg = <0x1a000 0x1000>; + interrupts = <46 0x8>; + interrupt-parent = <&ipic>; + }; + + sata@1b000 { + compatible = "fsl,mpc8379-sata"; + reg = <0x1b000 0x1000>; + interrupts = <47 0x8>; + interrupt-parent = <&ipic>; + }; + + /* IPIC + * interrupts cell = <intr #, sense> + * sense values match linux IORESOURCE_IRQ_* defines: + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + ipic: pic@700 { + compatible = "fsl,ipic"; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x700 0x100>; + }; + }; + + pci0: pci@e0008500 { + cell-index = <0>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x11 */ + 0x8800 0x0 0x0 0x1 &ipic 20 0x8 + 0x8800 0x0 0x0 0x2 &ipic 21 0x8 + 0x8800 0x0 0x0 0x3 &ipic 22 0x8 + 0x8800 0x0 0x0 0x4 &ipic 23 0x8 + + /* IDSEL 0x12 */ + 0x9000 0x0 0x0 0x1 &ipic 22 0x8 + 0x9000 0x0 0x0 0x2 &ipic 23 0x8 + 0x9000 0x0 0x0 0x3 &ipic 20 0x8 + 0x9000 0x0 0x0 0x4 &ipic 21 0x8 + + /* IDSEL 0x13 */ + 0x9800 0x0 0x0 0x1 &ipic 23 0x8 + 0x9800 0x0 0x0 0x2 &ipic 20 0x8 + 0x9800 0x0 0x0 0x3 &ipic 21 0x8 + 0x9800 0x0 0x0 0x4 &ipic 22 0x8 + + /* IDSEL 0x15 */ + 0xa800 0x0 0x0 0x1 &ipic 20 0x8 + 0xa800 0x0 0x0 0x2 &ipic 21 0x8 + 0xa800 0x0 0x0 0x3 &ipic 22 0x8 + 0xa800 0x0 0x0 0x4 &ipic 23 0x8 + + /* IDSEL 0x16 */ + 0xb000 0x0 0x0 0x1 &ipic 23 0x8 + 0xb000 0x0 0x0 0x2 &ipic 20 0x8 + 0xb000 0x0 0x0 0x3 &ipic 21 0x8 + 0xb000 0x0 0x0 0x4 &ipic 22 0x8 + + /* IDSEL 0x17 */ + 0xb800 0x0 0x0 0x1 &ipic 22 0x8 + 0xb800 0x0 0x0 0x2 &ipic 23 0x8 + 0xb800 0x0 0x0 0x3 &ipic 20 0x8 + 0xb800 0x0 0x0 0x4 &ipic 21 0x8 + + /* IDSEL 0x18 */ + 0xc000 0x0 0x0 0x1 &ipic 21 0x8 + 0xc000 0x0 0x0 0x2 &ipic 22 0x8 + 0xc000 0x0 0x0 0x3 &ipic 23 0x8 + 0xc000 0x0 0x0 0x4 &ipic 20 0x8>; + interrupt-parent = <&ipic>; + interrupts = <66 0x8>; + bus-range = <0x0 0x0>; + ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 + 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>; + clock-frequency = <0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008500 0x100>; + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts new file mode 100644 index 00000000000..0dda2fc558f --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts @@ -0,0 +1,310 @@ +/* + * MPC8379E RDB Device Tree Source + * + * Copyright 2007, 2008 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + compatible = "fsl,mpc8379rdb"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8379@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; // 256MB at 0 + }; + + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8379-elbc", "fsl,elbc", "simple-bus"; + reg = <0xe0005000 0x1000>; + interrupts = <77 0x8>; + interrupt-parent = <&ipic>; + + // CS0 and CS1 are swapped when + // booting from nand, but the + // addresses are the same. + ranges = <0x0 0x0 0xfe000000 0x00800000 + 0x1 0x0 0xe0600000 0x00008000 + 0x2 0x0 0xf0000000 0x00020000 + 0x3 0x0 0xfa000000 0x00008000>; + + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x800000>; + bank-width = <2>; + device-width = <1>; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8379-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x8000>; + + u-boot@0 { + reg = <0x0 0x100000>; + read-only; + }; + + kernel@100000 { + reg = <0x100000 0x300000>; + }; + fs@400000 { + reg = <0x400000 0x1c00000>; + }; + }; + }; + + immr@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + ranges = <0x0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00000200>; + bus-frequency = <0>; + + wdt@200 { + device_type = "watchdog"; + compatible = "mpc83xx_wdt"; + reg = <0x200 0x100>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + rtc@68 { + device_type = "rtc"; + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <15 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + }; + + spi@7000 { + cell-index = <0>; + compatible = "fsl,spi"; + reg = <0x7000 0x1000>; + interrupts = <16 0x8>; + interrupt-parent = <&ipic>; + mode = "cpu"; + }; + + /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ + usb@23000 { + compatible = "fsl-usb2-dr"; + reg = <0x23000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&ipic>; + interrupts = <38 0x8>; + phy_type = "utmi"; + }; + + mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x24520 0x20>; + phy2: ethernet-phy@2 { + interrupt-parent = <&ipic>; + interrupts = <17 0x8>; + reg = <0x2>; + device_type = "ethernet-phy"; + }; + phy3: ethernet-phy@3 { + interrupt-parent = <&ipic>; + interrupts = <18 0x8>; + reg = <0x3>; + device_type = "ethernet-phy"; + }; + }; + + enet0: ethernet@24000 { + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <32 0x8 33 0x8 34 0x8>; + phy-connection-type = "mii"; + interrupt-parent = <&ipic>; + phy-handle = <&phy2>; + }; + + enet1: ethernet@25000 { + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 0x8 36 0x8 37 0x8>; + phy-connection-type = "mii"; + interrupt-parent = <&ipic>; + phy-handle = <&phy3>; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <9 0x8>; + interrupt-parent = <&ipic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <10 0x8>; + interrupt-parent = <&ipic>; + }; + + crypto@30000 { + model = "SEC3"; + device_type = "crypto"; + compatible = "talitos"; + reg = <0x30000 0x10000>; + interrupts = <11 0x8>; + interrupt-parent = <&ipic>; + /* Rev. 3.0 geometry */ + num-channels = <4>; + channel-fifo-len = <24>; + exec-units-mask = <0x000001fe>; + descriptor-types-mask = <0x03ab0ebf>; + }; + + sata@18000 { + compatible = "fsl,mpc8379-sata", "fsl,pq-sata"; + reg = <0x18000 0x1000>; + interrupts = <44 0x8>; + interrupt-parent = <&ipic>; + }; + + sata@19000 { + compatible = "fsl,mpc8379-sata", "fsl,pq-sata"; + reg = <0x19000 0x1000>; + interrupts = <45 0x8>; + interrupt-parent = <&ipic>; + }; + + sata@1a000 { + compatible = "fsl,mpc8379-sata", "fsl,pq-sata"; + reg = <0x1a000 0x1000>; + interrupts = <46 0x8>; + interrupt-parent = <&ipic>; + }; + + sata@1b000 { + compatible = "fsl,mpc8379-sata", "fsl,pq-sata"; + reg = <0x1b000 0x1000>; + interrupts = <47 0x8>; + interrupt-parent = <&ipic>; + }; + + /* IPIC + * interrupts cell = <intr #, sense> + * sense values match linux IORESOURCE_IRQ_* defines: + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + ipic: interrupt-controller@700 { + compatible = "fsl,ipic"; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x700 0x100>; + }; + }; + + pci0: pci@e0008500 { + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */ + + /* IDSEL AD14 IRQ6 inta */ + 0x7000 0x0 0x0 0x1 &ipic 22 0x8 + + /* IDSEL AD15 IRQ5 inta, IRQ6 intb, IRQ7 intd */ + 0x7800 0x0 0x0 0x1 &ipic 21 0x8 + 0x7800 0x0 0x0 0x2 &ipic 22 0x8 + 0x7800 0x0 0x0 0x4 &ipic 23 0x8 + + /* IDSEL AD28 IRQ7 inta, IRQ5 intb IRQ6 intc*/ + 0xE000 0x0 0x0 0x1 &ipic 23 0x8 + 0xE000 0x0 0x0 0x2 &ipic 21 0x8 + 0xE000 0x0 0x0 0x3 &ipic 22 0x8>; + interrupt-parent = <&ipic>; + interrupts = <66 0x8>; + bus-range = <0x0 0x0>; + ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 + 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>; + clock-frequency = <66666666>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008500 0x100>; + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts index 6442a717ec3..975248491b7 100644 --- a/arch/powerpc/boot/dts/mpc8540ads.dts +++ b/arch/powerpc/boot/dts/mpc8540ads.dts @@ -16,6 +16,15 @@ #address-cells = <1>; #size-cells = <1>; + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -63,7 +72,9 @@ }; i2c@3000 { - device_type = "i2c"; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; compatible = "fsl-i2c"; reg = <3000 100>; interrupts = <2b 2>; @@ -74,9 +85,9 @@ mdio@24520 { #address-cells = <1>; #size-cells = <0>; - device_type = "mdio"; - compatible = "gianfar"; + compatible = "fsl,gianfar-mdio"; reg = <24520 20>; + phy0: ethernet-phy@0 { interrupt-parent = <&mpic>; interrupts = <5 1>; @@ -97,64 +108,44 @@ }; }; - ethernet@24000 { - #address-cells = <1>; - #size-cells = <0>; + enet0: ethernet@24000 { + cell-index = <0>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; reg = <24000 1000>; - /* - * address is deprecated and will be removed - * in 2.6.25. Only recent versions of - * U-Boot support local-mac-address, however. - */ - address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <1d 2 1e 2 22 2>; interrupt-parent = <&mpic>; phy-handle = <&phy0>; }; - ethernet@25000 { - #address-cells = <1>; - #size-cells = <0>; + enet1: ethernet@25000 { + cell-index = <1>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; reg = <25000 1000>; - /* - * address is deprecated and will be removed - * in 2.6.25. Only recent versions of - * U-Boot support local-mac-address, however. - */ - address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <23 2 24 2 28 2>; interrupt-parent = <&mpic>; phy-handle = <&phy1>; }; - ethernet@26000 { - #address-cells = <1>; - #size-cells = <0>; + enet2: ethernet@26000 { + cell-index = <2>; device_type = "network"; model = "FEC"; compatible = "gianfar"; reg = <26000 1000>; - /* - * address is deprecated and will be removed - * in 2.6.25. Only recent versions of - * U-Boot support local-mac-address, however. - */ - address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <29 2>; interrupt-parent = <&mpic>; phy-handle = <&phy3>; }; - serial@4500 { + serial0: serial@4500 { + cell-index = <0>; device_type = "serial"; compatible = "ns16550"; reg = <4500 100>; // reg base, size @@ -163,7 +154,8 @@ interrupt-parent = <&mpic>; }; - serial@4600 { + serial1: serial@4600 { + cell-index = <1>; device_type = "serial"; compatible = "ns16550"; reg = <4600 100>; // reg base, size @@ -183,7 +175,8 @@ }; }; - pci@e0008000 { + pci0: pci@e0008000 { + cell-index = <0>; interrupt-map-mask = <f800 0 0 7>; interrupt-map = < diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts index f3f4d79deb6..fa8d9aaad15 100644 --- a/arch/powerpc/boot/dts/mpc8541cds.dts +++ b/arch/powerpc/boot/dts/mpc8541cds.dts @@ -16,6 +16,15 @@ #address-cells = <1>; #size-cells = <1>; + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -63,7 +72,9 @@ }; i2c@3000 { - device_type = "i2c"; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; compatible = "fsl-i2c"; reg = <3000 100>; interrupts = <2b 2>; @@ -74,9 +85,9 @@ mdio@24520 { #address-cells = <1>; #size-cells = <0>; - device_type = "mdio"; - compatible = "gianfar"; + compatible = "fsl,gianfar-mdio"; reg = <24520 20>; + phy0: ethernet-phy@0 { interrupt-parent = <&mpic>; interrupts = <5 1>; @@ -91,9 +102,8 @@ }; }; - ethernet@24000 { - #address-cells = <1>; - #size-cells = <0>; + enet0: ethernet@24000 { + cell-index = <0>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; @@ -104,9 +114,8 @@ phy-handle = <&phy0>; }; - ethernet@25000 { - #address-cells = <1>; - #size-cells = <0>; + enet1: ethernet@25000 { + cell-index = <1>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; @@ -117,7 +126,8 @@ phy-handle = <&phy1>; }; - serial@4500 { + serial0: serial@4500 { + cell-index = <0>; device_type = "serial"; compatible = "ns16550"; reg = <4500 100>; // reg base, size @@ -126,7 +136,8 @@ interrupt-parent = <&mpic>; }; - serial@4600 { + serial1: serial@4600 { + cell-index = <1>; device_type = "serial"; compatible = "ns16550"; reg = <4600 100>; // reg base, size @@ -183,7 +194,8 @@ }; }; - pci1: pci@e0008000 { + pci0: pci@e0008000 { + cell-index = <0>; interrupt-map-mask = <1f800 0 0 7>; interrupt-map = < @@ -250,11 +262,12 @@ #interrupt-cells = <2>; compatible = "chrp,iic"; interrupts = <1>; - interrupt-parent = <&pci1>; + interrupt-parent = <&pci0>; }; }; - pci@e0009000 { + pci1: pci@e0009000 { + cell-index = <1>; interrupt-map-mask = <f800 0 0 7>; interrupt-map = < diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts index 6c608de1fc1..688af9d0638 100644 --- a/arch/powerpc/boot/dts/mpc8544ds.dts +++ b/arch/powerpc/boot/dts/mpc8544ds.dts @@ -15,6 +15,17 @@ #address-cells = <1>; #size-cells = <1>; + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + pci3 = &pci3; + }; + cpus { #cpus = <1>; #address-cells = <1>; @@ -64,7 +75,9 @@ }; i2c@3000 { - device_type = "i2c"; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; compatible = "fsl-i2c"; reg = <3000 100>; interrupts = <2b 2>; @@ -72,12 +85,23 @@ dfsrr; }; + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <3100 100>; + interrupts = <2b 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + mdio@24520 { #address-cells = <1>; #size-cells = <0>; - device_type = "mdio"; - compatible = "gianfar"; + compatible = "fsl,gianfar-mdio"; reg = <24520 20>; + phy0: ethernet-phy@0 { interrupt-parent = <&mpic>; interrupts = <a 1>; @@ -92,9 +116,8 @@ }; }; - ethernet@24000 { - #address-cells = <1>; - #size-cells = <0>; + enet0: ethernet@24000 { + cell-index = <0>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; @@ -106,9 +129,8 @@ phy-connection-type = "rgmii-id"; }; - ethernet@26000 { - #address-cells = <1>; - #size-cells = <0>; + enet1: ethernet@26000 { + cell-index = <1>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; @@ -120,7 +142,8 @@ phy-connection-type = "rgmii-id"; }; - serial@4500 { + serial0: serial@4500 { + cell-index = <0>; device_type = "serial"; compatible = "ns16550"; reg = <4500 100>; @@ -129,7 +152,8 @@ interrupt-parent = <&mpic>; }; - serial@4600 { + serial1: serial@4600 { + cell-index = <1>; device_type = "serial"; compatible = "ns16550"; reg = <4600 100>; @@ -156,7 +180,8 @@ }; }; - pci@e0008000 { + pci0: pci@e0008000 { + cell-index = <0>; compatible = "fsl,mpc8540-pci"; device_type = "pci"; interrupt-map-mask = <f800 0 0 7>; @@ -187,7 +212,8 @@ reg = <e0008000 1000>; }; - pcie@e0009000 { + pci1: pcie@e0009000 { + cell-index = <1>; compatible = "fsl,mpc8548-pcie"; device_type = "pci"; #interrupt-cells = <1>; @@ -223,7 +249,8 @@ }; }; - pcie@e000a000 { + pci2: pcie@e000a000 { + cell-index = <2>; compatible = "fsl,mpc8548-pcie"; device_type = "pci"; #interrupt-cells = <1>; @@ -259,7 +286,8 @@ }; }; - pcie@e000b000 { + pci3: pcie@e000b000 { + cell-index = <3>; compatible = "fsl,mpc8548-pcie"; device_type = "pci"; #interrupt-cells = <1>; @@ -276,9 +304,9 @@ interrupt-map = < // IDSEL 0x1c USB e000 0 0 1 &i8259 c 2 - e100 0 0 1 &i8259 9 2 - e200 0 0 1 &i8259 a 2 - e300 0 0 1 &i8259 b 2 + e100 0 0 2 &i8259 9 2 + e200 0 0 3 &i8259 a 2 + e300 0 0 4 &i8259 b 2 // IDSEL 0x1d Audio e800 0 0 1 &i8259 6 2 @@ -369,6 +397,5 @@ }; }; }; - }; }; diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts index 69ca5025d97..1f470c6a1c6 100644 --- a/arch/powerpc/boot/dts/mpc8548cds.dts +++ b/arch/powerpc/boot/dts/mpc8548cds.dts @@ -16,6 +16,20 @@ #address-cells = <1>; #size-cells = <1>; + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; +/* + ethernet2 = &enet2; + ethernet3 = &enet3; +*/ + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -63,7 +77,9 @@ }; i2c@3000 { - device_type = "i2c"; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; compatible = "fsl-i2c"; reg = <3000 100>; interrupts = <2b 2>; @@ -71,12 +87,23 @@ dfsrr; }; + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <3100 100>; + interrupts = <2b 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + mdio@24520 { #address-cells = <1>; #size-cells = <0>; - device_type = "mdio"; - compatible = "gianfar"; + compatible = "fsl,gianfar-mdio"; reg = <24520 20>; + phy0: ethernet-phy@0 { interrupt-parent = <&mpic>; interrupts = <5 1>; @@ -103,9 +130,8 @@ }; }; - ethernet@24000 { - #address-cells = <1>; - #size-cells = <0>; + enet0: ethernet@24000 { + cell-index = <0>; device_type = "network"; model = "eTSEC"; compatible = "gianfar"; @@ -116,9 +142,8 @@ phy-handle = <&phy0>; }; - ethernet@25000 { - #address-cells = <1>; - #size-cells = <0>; + enet1: ethernet@25000 { + cell-index = <1>; device_type = "network"; model = "eTSEC"; compatible = "gianfar"; @@ -130,9 +155,8 @@ }; /* eTSEC 3/4 are currently broken - ethernet@26000 { - #address-cells = <1>; - #size-cells = <0>; + enet2: ethernet@26000 { + cell-index = <2>; device_type = "network"; model = "eTSEC"; compatible = "gianfar"; @@ -143,9 +167,8 @@ phy-handle = <&phy2>; }; - ethernet@27000 { - #address-cells = <1>; - #size-cells = <0>; + enet3: ethernet@27000 { + cell-index = <3>; device_type = "network"; model = "eTSEC"; compatible = "gianfar"; @@ -157,7 +180,8 @@ }; */ - serial@4500 { + serial0: serial@4500 { + cell-index = <0>; device_type = "serial"; compatible = "ns16550"; reg = <4500 100>; // reg base, size @@ -166,7 +190,8 @@ interrupt-parent = <&mpic>; }; - serial@4600 { + serial1: serial@4600 { + cell-index = <1>; device_type = "serial"; compatible = "ns16550"; reg = <4600 100>; // reg base, size @@ -193,7 +218,8 @@ }; }; - pci@e0008000 { + pci0: pci@e0008000 { + cell-index = <0>; interrupt-map-mask = <f800 0 0 7>; interrupt-map = < /* IDSEL 0x4 (PCIX Slot 2) */ @@ -342,7 +368,8 @@ }; }; - pci@e0009000 { + pci1: pci@e0009000 { + cell-index = <1>; interrupt-map-mask = <f800 0 0 7>; interrupt-map = < @@ -366,7 +393,8 @@ device_type = "pci"; }; - pcie@e000a000 { + pci2: pcie@e000a000 { + cell-index = <2>; interrupt-map-mask = <f800 0 0 7>; interrupt-map = < diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts index 57029cca32b..4538f3c3886 100644 --- a/arch/powerpc/boot/dts/mpc8555cds.dts +++ b/arch/powerpc/boot/dts/mpc8555cds.dts @@ -16,6 +16,15 @@ #address-cells = <1>; #size-cells = <1>; + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -63,7 +72,9 @@ }; i2c@3000 { - device_type = "i2c"; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; compatible = "fsl-i2c"; reg = <3000 100>; interrupts = <2b 2>; @@ -74,9 +85,9 @@ mdio@24520 { #address-cells = <1>; #size-cells = <0>; - device_type = "mdio"; - compatible = "gianfar"; + compatible = "fsl,gianfar-mdio"; reg = <24520 20>; + phy0: ethernet-phy@0 { interrupt-parent = <&mpic>; interrupts = <5 1>; @@ -91,9 +102,8 @@ }; }; - ethernet@24000 { - #address-cells = <1>; - #size-cells = <0>; + enet0: ethernet@24000 { + cell-index = <0>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; @@ -104,9 +114,8 @@ phy-handle = <&phy0>; }; - ethernet@25000 { - #address-cells = <1>; - #size-cells = <0>; + enet1: ethernet@25000 { + cell-index = <1>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; @@ -117,7 +126,8 @@ phy-handle = <&phy1>; }; - serial@4500 { + serial0: serial@4500 { + cell-index = <0>; device_type = "serial"; compatible = "ns16550"; reg = <4500 100>; // reg base, size @@ -126,7 +136,8 @@ interrupt-parent = <&mpic>; }; - serial@4600 { + serial1: serial@4600 { + cell-index = <1>; device_type = "serial"; compatible = "ns16550"; reg = <4600 100>; // reg base, size @@ -183,7 +194,8 @@ }; }; - pci1: pci@e0008000 { + pci0: pci@e0008000 { + cell-index = <0>; interrupt-map-mask = <1f800 0 0 7>; interrupt-map = < @@ -250,11 +262,12 @@ #interrupt-cells = <2>; compatible = "chrp,iic"; interrupts = <1>; - interrupt-parent = <&pci1>; + interrupt-parent = <&pci0>; }; }; - pci@e0009000 { + pci1: pci@e0009000 { + cell-index = <1>; interrupt-map-mask = <f800 0 0 7>; interrupt-map = < diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts index 6b362f8222c..639ce8a709a 100644 --- a/arch/powerpc/boot/dts/mpc8560ads.dts +++ b/arch/powerpc/boot/dts/mpc8560ads.dts @@ -16,6 +16,16 @@ #address-cells = <1>; #size-cells = <1>; + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -63,11 +73,11 @@ }; mdio@24520 { - device_type = "mdio"; - compatible = "gianfar"; - reg = <24520 20>; #address-cells = <1>; #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <24520 20>; + phy0: ethernet-phy@0 { interrupt-parent = <&mpic>; interrupts = <5 1>; @@ -94,36 +104,24 @@ }; }; - ethernet@24000 { + enet0: ethernet@24000 { + cell-index = <0>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; reg = <24000 1000>; - /* - * address is deprecated and will be removed - * in 2.6.25. Only recent versions of - * U-Boot support local-mac-address, however. - */ - address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <1d 2 1e 2 22 2>; interrupt-parent = <&mpic>; phy-handle = <&phy0>; }; - ethernet@25000 { - #address-cells = <1>; - #size-cells = <0>; + enet1: ethernet@25000 { + cell-index = <1>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; reg = <25000 1000>; - /* - * address is deprecated and will be removed - * in 2.6.25. Only recent versions of - * U-Boot support local-mac-address, however. - */ - address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <23 2 24 2 28 2>; interrupt-parent = <&mpic>; @@ -174,7 +172,7 @@ compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic"; }; - serial@91a00 { + serial0: serial@91a00 { device_type = "serial"; compatible = "fsl,mpc8560-scc-uart", "fsl,cpm2-scc-uart"; @@ -186,7 +184,7 @@ interrupt-parent = <&cpmpic>; }; - serial@91a20 { + serial1: serial@91a20 { device_type = "serial"; compatible = "fsl,mpc8560-scc-uart", "fsl,cpm2-scc-uart"; @@ -198,17 +196,11 @@ interrupt-parent = <&cpmpic>; }; - ethernet@91320 { + enet2: ethernet@91320 { device_type = "network"; compatible = "fsl,mpc8560-fcc-enet", "fsl,cpm2-fcc-enet"; reg = <91320 20 88500 100 913b0 1>; - /* - * mac-address is deprecated and will be removed - * in 2.6.25. Only recent versions of - * U-Boot support local-mac-address, however. - */ - mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ]; fsl,cpm-command = <16200300>; interrupts = <21 8>; @@ -216,17 +208,11 @@ phy-handle = <&phy2>; }; - ethernet@91340 { + enet3: ethernet@91340 { device_type = "network"; compatible = "fsl,mpc8560-fcc-enet", "fsl,cpm2-fcc-enet"; reg = <91340 20 88600 100 913d0 1>; - /* - * mac-address is deprecated and will be removed - * in 2.6.25. Only recent versions of - * U-Boot support local-mac-address, however. - */ - mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ]; fsl,cpm-command = <1a400300>; interrupts = <22 8>; @@ -236,7 +222,8 @@ }; }; - pci@e0008000 { + pci0: pci@e0008000 { + cell-index = <0>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts index 54394372b12..97bc048f215 100644 --- a/arch/powerpc/boot/dts/mpc8568mds.dts +++ b/arch/powerpc/boot/dts/mpc8568mds.dts @@ -20,6 +20,17 @@ #address-cells = <1>; #size-cells = <1>; + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -74,7 +85,7 @@ i2c@3000 { #address-cells = <1>; #size-cells = <0>; - device_type = "i2c"; + cell-index = <0>; compatible = "fsl-i2c"; reg = <3000 100>; interrupts = <2b 2>; @@ -90,7 +101,7 @@ i2c@3100 { #address-cells = <1>; #size-cells = <0>; - device_type = "i2c"; + cell-index = <1>; compatible = "fsl-i2c"; reg = <3100 100>; interrupts = <2b 2>; @@ -101,9 +112,9 @@ mdio@24520 { #address-cells = <1>; #size-cells = <0>; - device_type = "mdio"; - compatible = "gianfar"; + compatible = "fsl,gianfar-mdio"; reg = <24520 20>; + phy0: ethernet-phy@7 { interrupt-parent = <&mpic>; interrupts = <1 1>; @@ -130,45 +141,32 @@ }; }; - ethernet@24000 { - #address-cells = <1>; - #size-cells = <0>; + enet0: ethernet@24000 { + cell-index = <0>; device_type = "network"; model = "eTSEC"; compatible = "gianfar"; reg = <24000 1000>; - /* - * mac-address is deprecated and will be removed - * in 2.6.25. Only recent versions of - * U-Boot support local-mac-address, however. - */ - mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <1d 2 1e 2 22 2>; interrupt-parent = <&mpic>; phy-handle = <&phy2>; }; - ethernet@25000 { - #address-cells = <1>; - #size-cells = <0>; + enet1: ethernet@25000 { + cell-index = <1>; device_type = "network"; model = "eTSEC"; compatible = "gianfar"; reg = <25000 1000>; - /* - * mac-address is deprecated and will be removed - * in 2.6.25. Only recent versions of - * U-Boot support local-mac-address, however. - */ - mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <23 2 24 2 28 2>; interrupt-parent = <&mpic>; phy-handle = <&phy3>; }; - serial@4500 { + serial0: serial@4500 { + cell-index = <0>; device_type = "serial"; compatible = "ns16550"; reg = <4500 100>; @@ -183,7 +181,8 @@ fsl,has-rstcr; }; - serial@4600 { + serial1: serial@4600 { + cell-index = <1>; device_type = "serial"; compatible = "ns16550"; reg = <4600 100>; @@ -285,24 +284,28 @@ #address-cells = <1>; #size-cells = <1>; device_type = "qe"; - model = "QE"; + compatible = "fsl,qe"; ranges = <0 e0080000 00040000>; reg = <e0080000 480>; brg-frequency = <0>; bus-frequency = <179A7B00>; muram@10000 { - device_type = "muram"; + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,qe-muram", "fsl,cpm-muram"; ranges = <0 00010000 0000c000>; - data-only@0{ + data-only@0 { + compatible = "fsl,qe-muram-data", + "fsl,cpm-muram-data"; reg = <0 c000>; }; }; spi@4c0 { - device_type = "spi"; - compatible = "fsl_spi"; + cell-index = <0>; + compatible = "fsl,spi"; reg = <4c0 40>; interrupts = <2>; interrupt-parent = <&qeic>; @@ -310,53 +313,43 @@ }; spi@500 { - device_type = "spi"; - compatible = "fsl_spi"; + cell-index = <1>; + compatible = "fsl,spi"; reg = <500 40>; interrupts = <1>; interrupt-parent = <&qeic>; mode = "cpu"; }; - ucc@2000 { + enet2: ucc@2000 { device_type = "network"; compatible = "ucc_geth"; model = "UCC"; + cell-index = <1>; device-id = <1>; reg = <2000 200>; interrupts = <20>; interrupt-parent = <&qeic>; - /* - * mac-address is deprecated and will be removed - * in 2.6.25. Only recent versions of - * U-Boot support local-mac-address, however. - */ - mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ]; - rx-clock = <0>; - tx-clock = <20>; + rx-clock-name = "none"; + tx-clock-name = "clk16"; pio-handle = <&pio1>; phy-handle = <&phy0>; phy-connection-type = "rgmii-id"; }; - ucc@3000 { + enet3: ucc@3000 { device_type = "network"; compatible = "ucc_geth"; model = "UCC"; + cell-index = <2>; device-id = <2>; reg = <3000 200>; interrupts = <21>; interrupt-parent = <&qeic>; - /* - * mac-address is deprecated and will be removed - * in 2.6.25. Only recent versions of - * U-Boot support local-mac-address, however. - */ - mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ]; - rx-clock = <0>; - tx-clock = <20>; + rx-clock-name = "none"; + tx-clock-name = "clk16"; pio-handle = <&pio2>; phy-handle = <&phy1>; phy-connection-type = "rgmii-id"; @@ -366,8 +359,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <2120 18>; - device_type = "mdio"; - compatible = "ucc_geth_phy"; + compatible = "fsl,ucc-mdio"; /* These are the same PHYs as on * gianfar's MDIO bus */ @@ -397,9 +389,9 @@ }; }; - qeic: qeic@80 { + qeic: interrupt-controller@80 { interrupt-controller; - device_type = "qeic"; + compatible = "fsl,qe-ic"; #address-cells = <0>; #interrupt-cells = <1>; reg = <80 80>; @@ -410,7 +402,8 @@ }; - pci@e0008000 { + pci0: pci@e0008000 { + cell-index = <0>; interrupt-map-mask = <f800 0 0 7>; interrupt-map = < /* IDSEL 0x12 AD18 */ @@ -440,7 +433,8 @@ }; /* PCI Express */ - pcie@e000a000 { + pci1: pcie@e000a000 { + cell-index = <2>; interrupt-map-mask = <f800 0 0 7>; interrupt-map = < diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/mpc8572ds.dts index 0eb44fb9647..813c259abbe 100644 --- a/arch/powerpc/boot/dts/mpc8572ds.dts +++ b/arch/powerpc/boot/dts/mpc8572ds.dts @@ -15,6 +15,18 @@ #address-cells = <1>; #size-cells = <1>; + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -69,7 +81,9 @@ }; i2c@3000 { - device_type = "i2c"; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; compatible = "fsl-i2c"; reg = <3000 100>; interrupts = <2b 2>; @@ -78,7 +92,9 @@ }; i2c@3100 { - device_type = "i2c"; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; compatible = "fsl-i2c"; reg = <3100 100>; interrupts = <2b 2>; @@ -89,9 +105,9 @@ mdio@24520 { #address-cells = <1>; #size-cells = <0>; - device_type = "mdio"; - compatible = "gianfar"; + compatible = "fsl,gianfar-mdio"; reg = <24520 20>; + phy0: ethernet-phy@0 { interrupt-parent = <&mpic>; interrupts = <a 1>; @@ -114,9 +130,8 @@ }; }; - ethernet@24000 { - #address-cells = <1>; - #size-cells = <0>; + enet0: ethernet@24000 { + cell-index = <0>; device_type = "network"; model = "eTSEC"; compatible = "gianfar"; @@ -128,9 +143,8 @@ phy-connection-type = "rgmii-id"; }; - ethernet@25000 { - #address-cells = <1>; - #size-cells = <0>; + enet1: ethernet@25000 { + cell-index = <1>; device_type = "network"; model = "eTSEC"; compatible = "gianfar"; @@ -142,9 +156,8 @@ phy-connection-type = "rgmii-id"; }; - ethernet@26000 { - #address-cells = <1>; - #size-cells = <0>; + enet2: ethernet@26000 { + cell-index = <2>; device_type = "network"; model = "eTSEC"; compatible = "gianfar"; @@ -156,9 +169,8 @@ phy-connection-type = "rgmii-id"; }; - ethernet@27000 { - #address-cells = <1>; - #size-cells = <0>; + enet3: ethernet@27000 { + cell-index = <3>; device_type = "network"; model = "eTSEC"; compatible = "gianfar"; @@ -170,7 +182,8 @@ phy-connection-type = "rgmii-id"; }; - serial@4500 { + serial0: serial@4500 { + cell-index = <0>; device_type = "serial"; compatible = "ns16550"; reg = <4500 100>; @@ -179,7 +192,8 @@ interrupt-parent = <&mpic>; }; - serial@4600 { + serial1: serial@4600 { + cell-index = <1>; device_type = "serial"; compatible = "ns16550"; reg = <4600 100>; @@ -206,7 +220,8 @@ }; }; - pcie@ffe08000 { + pci0: pcie@ffe08000 { + cell-index = <0>; compatible = "fsl,mpc8548-pcie"; device_type = "pci"; #interrupt-cells = <1>; @@ -319,9 +334,9 @@ // IDSEL 0x1c USB e000 0 0 1 &i8259 c 2 - e100 0 0 1 &i8259 9 2 - e200 0 0 1 &i8259 a 2 - e300 0 0 1 &i8259 b 2 + e100 0 0 2 &i8259 9 2 + e200 0 0 3 &i8259 a 2 + e300 0 0 4 &i8259 b 2 // IDSEL 0x1d Audio e800 0 0 1 &i8259 6 2 @@ -415,7 +430,8 @@ }; - pcie@ffe09000 { + pci1: pcie@ffe09000 { + cell-index = <1>; compatible = "fsl,mpc8548-pcie"; device_type = "pci"; #interrupt-cells = <1>; @@ -451,7 +467,8 @@ }; }; - pcie@ffe0a000 { + pci2: pcie@ffe0a000 { + cell-index = <2>; compatible = "fsl,mpc8548-pcie"; device_type = "pci"; #interrupt-cells = <1>; @@ -464,6 +481,7 @@ clock-frequency = <1fca055>; interrupt-parent = <&mpic>; interrupts = <1b 2>; + interrupt-map-mask = <f800 0 0 7>; interrupt-map = < /* IDSEL 0x0 */ 0000 0 0 1 &mpic 0 1 diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts index 966edf1161a..16c947b8a72 100644 --- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts +++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts @@ -1,13 +1,14 @@ /* * MPC8610 HPCD Device Tree Source * - * Copyright 2007 Freescale Semiconductor Inc. + * Copyright 2007-2008 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License Version 2 as published * by the Free Software Foundation. */ +/dts-v1/; / { model = "MPC8610HPCD"; @@ -15,6 +16,13 @@ #address-cells = <1>; #size-cells = <1>; + aliases { + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -22,11 +30,11 @@ PowerPC,8610@0 { device_type = "cpu"; reg = <0>; - d-cache-line-size = <d# 32>; // bytes - i-cache-line-size = <d# 32>; // bytes - d-cache-size = <8000>; // L1, 32K - i-cache-size = <8000>; // L1, 32K - timebase-frequency = <0>; // 33 MHz, from uboot + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; // L1 + i-cache-size = <32768>; // L1 + timebase-frequency = <0>; // From uboot bus-frequency = <0>; // From uboot clock-frequency = <0>; // From uboot }; @@ -34,7 +42,7 @@ memory { device_type = "memory"; - reg = <00000000 20000000>; // 512M at 0x0 + reg = <0x00000000 0x20000000>; // 512M at 0x0 }; soc@e0000000 { @@ -42,57 +50,66 @@ #size-cells = <1>; #interrupt-cells = <2>; device_type = "soc"; - ranges = <0 e0000000 00100000>; - reg = <e0000000 1000>; + compatible = "fsl,mpc8610-immr", "simple-bus"; + ranges = <0x0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x1000>; bus-frequency = <0>; i2c@3000 { - device_type = "i2c"; - compatible = "fsl-i2c"; #address-cells = <1>; #size-cells = <0>; - reg = <3000 100>; - interrupts = <2b 2>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; interrupt-parent = <&mpic>; dfsrr; + + cs4270:codec@4f { + compatible = "cirrus,cs4270"; + reg = <0x4f>; + /* MCLK source is a stand-alone oscillator */ + clock-frequency = <12288000>; + }; }; i2c@3100 { - device_type = "i2c"; - compatible = "fsl-i2c"; #address-cells = <1>; #size-cells = <0>; - reg = <3100 100>; - interrupts = <2b 2>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <43 2>; interrupt-parent = <&mpic>; dfsrr; }; - serial@4500 { + serial0: serial@4500 { + cell-index = <0>; device_type = "serial"; compatible = "ns16550"; - reg = <4500 100>; + reg = <0x4500 0x100>; clock-frequency = <0>; - interrupts = <2a 2>; + interrupts = <42 2>; interrupt-parent = <&mpic>; }; - serial@4600 { + serial1: serial@4600 { + cell-index = <1>; device_type = "serial"; compatible = "ns16550"; - reg = <4600 100>; + reg = <0x4600 0x100>; clock-frequency = <0>; - interrupts = <1c 2>; + interrupts = <28 2>; interrupt-parent = <&mpic>; }; - mpic: interrupt-controller@40000 { clock-frequency = <0>; interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; - reg = <40000 40000>; + reg = <0x40000 0x40000>; compatible = "chrp,open-pic"; device_type = "open-pic"; big-endian; @@ -100,68 +117,173 @@ global-utilities@e0000 { compatible = "fsl,mpc8610-guts"; - reg = <e0000 1000>; + reg = <0xe0000 0x1000>; fsl,has-rstcr; }; + + i2s@16000 { + compatible = "fsl,mpc8610-ssi"; + cell-index = <0>; + reg = <0x16000 0x100>; + interrupt-parent = <&mpic>; + interrupts = <62 2>; + fsl,mode = "i2s-slave"; + codec-handle = <&cs4270>; + }; + + ssi@16100 { + compatible = "fsl,mpc8610-ssi"; + cell-index = <1>; + reg = <0x16100 0x100>; + interrupt-parent = <&mpic>; + interrupts = <63 2>; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8610-dma", "fsl,eloplus-dma"; + cell-index = <0>; + reg = <0x21300 0x4>; /* DMA general status register */ + ranges = <0x0 0x21100 0x200>; + + dma-channel@0 { + compatible = "fsl,mpc8610-dma-channel", + "fsl,eloplus-dma-channel"; + cell-index = <0>; + reg = <0x0 0x80>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@1 { + compatible = "fsl,mpc8610-dma-channel", + "fsl,eloplus-dma-channel"; + cell-index = <1>; + reg = <0x80 0x80>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@2 { + compatible = "fsl,mpc8610-dma-channel", + "fsl,eloplus-dma-channel"; + cell-index = <2>; + reg = <0x100 0x80>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@3 { + compatible = "fsl,mpc8610-dma-channel", + "fsl,eloplus-dma-channel"; + cell-index = <3>; + reg = <0x180 0x80>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + dma@c300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8610-dma", "fsl,mpc8540-dma"; + cell-index = <1>; + reg = <0xc300 0x4>; /* DMA general status register */ + ranges = <0x0 0xc100 0x200>; + + dma-channel@0 { + compatible = "fsl,mpc8610-dma-channel", + "fsl,mpc8540-dma-channel"; + cell-index = <0>; + reg = <0x0 0x80>; + interrupt-parent = <&mpic>; + interrupts = <60 2>; + }; + dma-channel@1 { + compatible = "fsl,mpc8610-dma-channel", + "fsl,mpc8540-dma-channel"; + cell-index = <1>; + reg = <0x80 0x80>; + interrupt-parent = <&mpic>; + interrupts = <61 2>; + }; + dma-channel@2 { + compatible = "fsl,mpc8610-dma-channel", + "fsl,mpc8540-dma-channel"; + cell-index = <2>; + reg = <0x100 0x80>; + interrupt-parent = <&mpic>; + interrupts = <62 2>; + }; + dma-channel@3 { + compatible = "fsl,mpc8610-dma-channel", + "fsl,mpc8540-dma-channel"; + cell-index = <3>; + reg = <0x180 0x80>; + interrupt-parent = <&mpic>; + interrupts = <63 2>; + }; + }; + }; - pci@e0008000 { + pci0: pci@e0008000 { + cell-index = <0>; compatible = "fsl,mpc8610-pci"; device_type = "pci"; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <e0008000 1000>; + reg = <0xe0008000 0x1000>; bus-range = <0 0>; - ranges = <02000000 0 80000000 80000000 0 10000000 - 01000000 0 00000000 e1000000 0 00100000>; - clock-frequency = <1fca055>; + ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe1000000 0x0 0x00100000>; + clock-frequency = <33333333>; interrupt-parent = <&mpic>; - interrupts = <18 2>; - interrupt-map-mask = <f800 0 0 7>; + interrupts = <24 2>; + interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = < /* IDSEL 0x11 */ - 8800 0 0 1 &mpic 4 1 - 8800 0 0 2 &mpic 5 1 - 8800 0 0 3 &mpic 6 1 - 8800 0 0 4 &mpic 7 1 + 0x8800 0 0 1 &mpic 4 1 + 0x8800 0 0 2 &mpic 5 1 + 0x8800 0 0 3 &mpic 6 1 + 0x8800 0 0 4 &mpic 7 1 /* IDSEL 0x12 */ - 9000 0 0 1 &mpic 5 1 - 9000 0 0 2 &mpic 6 1 - 9000 0 0 3 &mpic 7 1 - 9000 0 0 4 &mpic 4 1 + 0x9000 0 0 1 &mpic 5 1 + 0x9000 0 0 2 &mpic 6 1 + 0x9000 0 0 3 &mpic 7 1 + 0x9000 0 0 4 &mpic 4 1 >; }; - pcie@e000a000 { + pci1: pcie@e000a000 { + cell-index = <1>; compatible = "fsl,mpc8641-pcie"; device_type = "pci"; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <e000a000 1000>; + reg = <0xe000a000 0x1000>; bus-range = <1 3>; - ranges = <02000000 0 a0000000 a0000000 0 10000000 - 01000000 0 00000000 e3000000 0 00100000>; - clock-frequency = <1fca055>; + ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe3000000 0x0 0x00100000>; + clock-frequency = <33333333>; interrupt-parent = <&mpic>; - interrupts = <1a 2>; - interrupt-map-mask = <f800 0 0 7>; + interrupts = <26 2>; + interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = < /* IDSEL 0x1b */ - d800 0 0 1 &mpic 2 1 + 0xd800 0 0 1 &mpic 2 1 /* IDSEL 0x1c*/ - e000 0 0 1 &mpic 1 1 - e000 0 0 2 &mpic 1 1 - e000 0 0 3 &mpic 1 1 - e000 0 0 4 &mpic 1 1 + 0xe000 0 0 1 &mpic 1 1 + 0xe000 0 0 2 &mpic 1 1 + 0xe000 0 0 3 &mpic 1 1 + 0xe000 0 0 4 &mpic 1 1 /* IDSEL 0x1f */ - f800 0 0 1 &mpic 3 0 - f800 0 0 2 &mpic 0 1 + 0xf800 0 0 1 &mpic 3 0 + 0xf800 0 0 2 &mpic 0 1 >; pcie@0 { @@ -169,22 +291,22 @@ #size-cells = <2>; #address-cells = <3>; device_type = "pci"; - ranges = <02000000 0 a0000000 - 02000000 0 a0000000 - 0 10000000 - 01000000 0 00000000 - 01000000 0 00000000 - 0 00100000>; + ranges = <0x02000000 0x0 0xa0000000 + 0x02000000 0x0 0xa0000000 + 0x0 0x10000000 + 0x01000000 0x0 0x00000000 + 0x01000000 0x0 0x00000000 + 0x0 0x00100000>; uli1575@0 { reg = <0 0 0 0 0>; #size-cells = <2>; #address-cells = <3>; - ranges = <02000000 0 a0000000 - 02000000 0 a0000000 - 0 10000000 - 01000000 0 00000000 - 01000000 0 00000000 - 0 00100000>; + ranges = <0x02000000 0x0 0xa0000000 + 0x02000000 0x0 0xa0000000 + 0x0 0x10000000 + 0x01000000 0x0 0x00000000 + 0x01000000 0x0 0x00000000 + 0x0 0x00100000>; }; }; }; diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts index abb26dc4255..79385bcd5c5 100644 --- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts +++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts @@ -9,6 +9,7 @@ * option) any later version. */ +/dts-v1/; / { model = "MPC8641HPCN"; @@ -16,6 +17,17 @@ #address-cells = <1>; #size-cells = <1>; + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -23,22 +35,22 @@ PowerPC,8641@0 { device_type = "cpu"; reg = <0>; - d-cache-line-size = <20>; // 32 bytes - i-cache-line-size = <20>; // 32 bytes - d-cache-size = <8000>; // L1, 32K - i-cache-size = <8000>; // L1, 32K - timebase-frequency = <0>; // 33 MHz, from uboot + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; // L1 + i-cache-size = <32768>; // L1 + timebase-frequency = <0>; // From uboot bus-frequency = <0>; // From uboot clock-frequency = <0>; // From uboot }; PowerPC,8641@1 { device_type = "cpu"; reg = <1>; - d-cache-line-size = <20>; // 32 bytes - i-cache-line-size = <20>; // 32 bytes - d-cache-size = <8000>; // L1, 32K - i-cache-size = <8000>; // L1, 32K - timebase-frequency = <0>; // 33 MHz, from uboot + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + timebase-frequency = <0>; // From uboot bus-frequency = <0>; // From uboot clock-frequency = <0>; // From uboot }; @@ -46,31 +58,77 @@ memory { device_type = "memory"; - reg = <00000000 40000000>; // 1G at 0x0 + reg = <0x00000000 0x40000000>; // 1G at 0x0 + }; + + localbus@f8005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8641-localbus", "simple-bus"; + reg = <0xf8005000 0x1000>; + interrupts = <19 2>; + interrupt-parent = <&mpic>; + + ranges = <0 0 0xff800000 0x00800000 + 1 0 0xfe000000 0x01000000 + 2 0 0xf8200000 0x00100000 + 3 0 0xf8100000 0x00100000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x00800000>; + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "kernel"; + reg = <0x00000000 0x00300000>; + }; + partition@300000 { + label = "firmware b"; + reg = <0x00300000 0x00100000>; + read-only; + }; + partition@400000 { + label = "fs"; + reg = <0x00400000 0x00300000>; + }; + partition@700000 { + label = "firmware a"; + reg = <0x00700000 0x00100000>; + read-only; + }; + }; }; soc8641@f8000000 { #address-cells = <1>; #size-cells = <1>; device_type = "soc"; - ranges = <00000000 f8000000 00100000>; - reg = <f8000000 00001000>; // CCSRBAR + compatible = "simple-bus"; + ranges = <0x00000000 0xf8000000 0x00100000>; + reg = <0xf8000000 0x00001000>; // CCSRBAR bus-frequency = <0>; i2c@3000 { - device_type = "i2c"; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; compatible = "fsl-i2c"; - reg = <3000 100>; - interrupts = <2b 2>; + reg = <0x3000 0x100>; + interrupts = <43 2>; interrupt-parent = <&mpic>; dfsrr; }; i2c@3100 { - device_type = "i2c"; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; compatible = "fsl-i2c"; - reg = <3100 100>; - interrupts = <2b 2>; + reg = <0x3100 0x100>; + interrupts = <43 2>; interrupt-parent = <&mpic>; dfsrr; }; @@ -78,129 +136,104 @@ mdio@24520 { #address-cells = <1>; #size-cells = <0>; - device_type = "mdio"; - compatible = "gianfar"; - reg = <24520 20>; + compatible = "fsl,gianfar-mdio"; + reg = <0x24520 0x20>; + phy0: ethernet-phy@0 { interrupt-parent = <&mpic>; - interrupts = <a 1>; + interrupts = <10 1>; reg = <0>; device_type = "ethernet-phy"; }; phy1: ethernet-phy@1 { interrupt-parent = <&mpic>; - interrupts = <a 1>; + interrupts = <10 1>; reg = <1>; device_type = "ethernet-phy"; }; phy2: ethernet-phy@2 { interrupt-parent = <&mpic>; - interrupts = <a 1>; + interrupts = <10 1>; reg = <2>; device_type = "ethernet-phy"; }; phy3: ethernet-phy@3 { interrupt-parent = <&mpic>; - interrupts = <a 1>; + interrupts = <10 1>; reg = <3>; device_type = "ethernet-phy"; }; }; - ethernet@24000 { - #address-cells = <1>; - #size-cells = <0>; + enet0: ethernet@24000 { + cell-index = <0>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; - reg = <24000 1000>; - /* - * mac-address is deprecated and will be removed - * in 2.6.25. Only recent versions of - * U-Boot support local-mac-address, however. - */ - mac-address = [ 00 00 00 00 00 00 ]; + reg = <0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <1d 2 1e 2 22 2>; + interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; phy-handle = <&phy0>; phy-connection-type = "rgmii-id"; }; - ethernet@25000 { - #address-cells = <1>; - #size-cells = <0>; + enet1: ethernet@25000 { + cell-index = <1>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; - reg = <25000 1000>; - /* - * mac-address is deprecated and will be removed - * in 2.6.25. Only recent versions of - * U-Boot support local-mac-address, however. - */ - mac-address = [ 00 00 00 00 00 00 ]; + reg = <0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <23 2 24 2 28 2>; + interrupts = <35 2 36 2 40 2>; interrupt-parent = <&mpic>; phy-handle = <&phy1>; phy-connection-type = "rgmii-id"; }; - ethernet@26000 { - #address-cells = <1>; - #size-cells = <0>; + enet2: ethernet@26000 { + cell-index = <2>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; - reg = <26000 1000>; - /* - * mac-address is deprecated and will be removed - * in 2.6.25. Only recent versions of - * U-Boot support local-mac-address, however. - */ - mac-address = [ 00 00 00 00 00 00 ]; + reg = <0x26000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <1F 2 20 2 21 2>; + interrupts = <31 2 32 2 33 2>; interrupt-parent = <&mpic>; phy-handle = <&phy2>; phy-connection-type = "rgmii-id"; }; - ethernet@27000 { - #address-cells = <1>; - #size-cells = <0>; + enet3: ethernet@27000 { + cell-index = <3>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; - reg = <27000 1000>; - /* - * mac-address is deprecated and will be removed - * in 2.6.25. Only recent versions of - * U-Boot support local-mac-address, however. - */ - mac-address = [ 00 00 00 00 00 00 ]; + reg = <0x27000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <25 2 26 2 27 2>; + interrupts = <37 2 38 2 39 2>; interrupt-parent = <&mpic>; phy-handle = <&phy3>; phy-connection-type = "rgmii-id"; }; - serial@4500 { + + serial0: serial@4500 { + cell-index = <0>; device_type = "serial"; compatible = "ns16550"; - reg = <4500 100>; + reg = <0x4500 0x100>; clock-frequency = <0>; - interrupts = <2a 2>; + interrupts = <42 2>; interrupt-parent = <&mpic>; }; - serial@4600 { + serial1: serial@4600 { + cell-index = <1>; device_type = "serial"; compatible = "ns16550"; - reg = <4600 100>; + reg = <0x4600 0x100>; clock-frequency = <0>; - interrupts = <1c 2>; + interrupts = <28 2>; interrupt-parent = <&mpic>; }; @@ -209,7 +242,7 @@ interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; - reg = <40000 40000>; + reg = <0x40000 0x40000>; compatible = "chrp,open-pic"; device_type = "open-pic"; big-endian; @@ -217,138 +250,139 @@ global-utilities@e0000 { compatible = "fsl,mpc8641-guts"; - reg = <e0000 1000>; + reg = <0xe0000 0x1000>; fsl,has-rstcr; }; }; - pcie@f8008000 { + pci0: pcie@f8008000 { + cell-index = <0>; compatible = "fsl,mpc8641-pcie"; device_type = "pci"; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <f8008000 1000>; - bus-range = <0 ff>; - ranges = <02000000 0 80000000 80000000 0 20000000 - 01000000 0 00000000 e2000000 0 00100000>; - clock-frequency = <1fca055>; + reg = <0xf8008000 0x1000>; + bus-range = <0x0 0xff>; + ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000 + 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>; + clock-frequency = <33333333>; interrupt-parent = <&mpic>; - interrupts = <18 2>; - interrupt-map-mask = <ff00 0 0 7>; + interrupts = <24 2>; + interrupt-map-mask = <0xff00 0 0 7>; interrupt-map = < /* IDSEL 0x11 func 0 - PCI slot 1 */ - 8800 0 0 1 &mpic 2 1 - 8800 0 0 2 &mpic 3 1 - 8800 0 0 3 &mpic 4 1 - 8800 0 0 4 &mpic 1 1 + 0x8800 0 0 1 &mpic 2 1 + 0x8800 0 0 2 &mpic 3 1 + 0x8800 0 0 3 &mpic 4 1 + 0x8800 0 0 4 &mpic 1 1 /* IDSEL 0x11 func 1 - PCI slot 1 */ - 8900 0 0 1 &mpic 2 1 - 8900 0 0 2 &mpic 3 1 - 8900 0 0 3 &mpic 4 1 - 8900 0 0 4 &mpic 1 1 + 0x8900 0 0 1 &mpic 2 1 + 0x8900 0 0 2 &mpic 3 1 + 0x8900 0 0 3 &mpic 4 1 + 0x8900 0 0 4 &mpic 1 1 /* IDSEL 0x11 func 2 - PCI slot 1 */ - 8a00 0 0 1 &mpic 2 1 - 8a00 0 0 2 &mpic 3 1 - 8a00 0 0 3 &mpic 4 1 - 8a00 0 0 4 &mpic 1 1 + 0x8a00 0 0 1 &mpic 2 1 + 0x8a00 0 0 2 &mpic 3 1 + 0x8a00 0 0 3 &mpic 4 1 + 0x8a00 0 0 4 &mpic 1 1 /* IDSEL 0x11 func 3 - PCI slot 1 */ - 8b00 0 0 1 &mpic 2 1 - 8b00 0 0 2 &mpic 3 1 - 8b00 0 0 3 &mpic 4 1 - 8b00 0 0 4 &mpic 1 1 + 0x8b00 0 0 1 &mpic 2 1 + 0x8b00 0 0 2 &mpic 3 1 + 0x8b00 0 0 3 &mpic 4 1 + 0x8b00 0 0 4 &mpic 1 1 /* IDSEL 0x11 func 4 - PCI slot 1 */ - 8c00 0 0 1 &mpic 2 1 - 8c00 0 0 2 &mpic 3 1 - 8c00 0 0 3 &mpic 4 1 - 8c00 0 0 4 &mpic 1 1 + 0x8c00 0 0 1 &mpic 2 1 + 0x8c00 0 0 2 &mpic 3 1 + 0x8c00 0 0 3 &mpic 4 1 + 0x8c00 0 0 4 &mpic 1 1 /* IDSEL 0x11 func 5 - PCI slot 1 */ - 8d00 0 0 1 &mpic 2 1 - 8d00 0 0 2 &mpic 3 1 - 8d00 0 0 3 &mpic 4 1 - 8d00 0 0 4 &mpic 1 1 + 0x8d00 0 0 1 &mpic 2 1 + 0x8d00 0 0 2 &mpic 3 1 + 0x8d00 0 0 3 &mpic 4 1 + 0x8d00 0 0 4 &mpic 1 1 /* IDSEL 0x11 func 6 - PCI slot 1 */ - 8e00 0 0 1 &mpic 2 1 - 8e00 0 0 2 &mpic 3 1 - 8e00 0 0 3 &mpic 4 1 - 8e00 0 0 4 &mpic 1 1 + 0x8e00 0 0 1 &mpic 2 1 + 0x8e00 0 0 2 &mpic 3 1 + 0x8e00 0 0 3 &mpic 4 1 + 0x8e00 0 0 4 &mpic 1 1 /* IDSEL 0x11 func 7 - PCI slot 1 */ - 8f00 0 0 1 &mpic 2 1 - 8f00 0 0 2 &mpic 3 1 - 8f00 0 0 3 &mpic 4 1 - 8f00 0 0 4 &mpic 1 1 + 0x8f00 0 0 1 &mpic 2 1 + 0x8f00 0 0 2 &mpic 3 1 + 0x8f00 0 0 3 &mpic 4 1 + 0x8f00 0 0 4 &mpic 1 1 /* IDSEL 0x12 func 0 - PCI slot 2 */ - 9000 0 0 1 &mpic 3 1 - 9000 0 0 2 &mpic 4 1 - 9000 0 0 3 &mpic 1 1 - 9000 0 0 4 &mpic 2 1 + 0x9000 0 0 1 &mpic 3 1 + 0x9000 0 0 2 &mpic 4 1 + 0x9000 0 0 3 &mpic 1 1 + 0x9000 0 0 4 &mpic 2 1 /* IDSEL 0x12 func 1 - PCI slot 2 */ - 9100 0 0 1 &mpic 3 1 - 9100 0 0 2 &mpic 4 1 - 9100 0 0 3 &mpic 1 1 - 9100 0 0 4 &mpic 2 1 + 0x9100 0 0 1 &mpic 3 1 + 0x9100 0 0 2 &mpic 4 1 + 0x9100 0 0 3 &mpic 1 1 + 0x9100 0 0 4 &mpic 2 1 /* IDSEL 0x12 func 2 - PCI slot 2 */ - 9200 0 0 1 &mpic 3 1 - 9200 0 0 2 &mpic 4 1 - 9200 0 0 3 &mpic 1 1 - 9200 0 0 4 &mpic 2 1 + 0x9200 0 0 1 &mpic 3 1 + 0x9200 0 0 2 &mpic 4 1 + 0x9200 0 0 3 &mpic 1 1 + 0x9200 0 0 4 &mpic 2 1 /* IDSEL 0x12 func 3 - PCI slot 2 */ - 9300 0 0 1 &mpic 3 1 - 9300 0 0 2 &mpic 4 1 - 9300 0 0 3 &mpic 1 1 - 9300 0 0 4 &mpic 2 1 + 0x9300 0 0 1 &mpic 3 1 + 0x9300 0 0 2 &mpic 4 1 + 0x9300 0 0 3 &mpic 1 1 + 0x9300 0 0 4 &mpic 2 1 /* IDSEL 0x12 func 4 - PCI slot 2 */ - 9400 0 0 1 &mpic 3 1 - 9400 0 0 2 &mpic 4 1 - 9400 0 0 3 &mpic 1 1 - 9400 0 0 4 &mpic 2 1 + 0x9400 0 0 1 &mpic 3 1 + 0x9400 0 0 2 &mpic 4 1 + 0x9400 0 0 3 &mpic 1 1 + 0x9400 0 0 4 &mpic 2 1 /* IDSEL 0x12 func 5 - PCI slot 2 */ - 9500 0 0 1 &mpic 3 1 - 9500 0 0 2 &mpic 4 1 - 9500 0 0 3 &mpic 1 1 - 9500 0 0 4 &mpic 2 1 + 0x9500 0 0 1 &mpic 3 1 + 0x9500 0 0 2 &mpic 4 1 + 0x9500 0 0 3 &mpic 1 1 + 0x9500 0 0 4 &mpic 2 1 /* IDSEL 0x12 func 6 - PCI slot 2 */ - 9600 0 0 1 &mpic 3 1 - 9600 0 0 2 &mpic 4 1 - 9600 0 0 3 &mpic 1 1 - 9600 0 0 4 &mpic 2 1 + 0x9600 0 0 1 &mpic 3 1 + 0x9600 0 0 2 &mpic 4 1 + 0x9600 0 0 3 &mpic 1 1 + 0x9600 0 0 4 &mpic 2 1 /* IDSEL 0x12 func 7 - PCI slot 2 */ - 9700 0 0 1 &mpic 3 1 - 9700 0 0 2 &mpic 4 1 - 9700 0 0 3 &mpic 1 1 - 9700 0 0 4 &mpic 2 1 + 0x9700 0 0 1 &mpic 3 1 + 0x9700 0 0 2 &mpic 4 1 + 0x9700 0 0 3 &mpic 1 1 + 0x9700 0 0 4 &mpic 2 1 // IDSEL 0x1c USB - e000 0 0 1 &i8259 c 2 - e100 0 0 1 &i8259 9 2 - e200 0 0 1 &i8259 a 2 - e300 0 0 1 &i8259 b 2 + 0xe000 0 0 1 &i8259 12 2 + 0xe100 0 0 2 &i8259 9 2 + 0xe200 0 0 3 &i8259 10 2 + 0xe300 0 0 4 &i8259 112 // IDSEL 0x1d Audio - e800 0 0 1 &i8259 6 2 + 0xe800 0 0 1 &i8259 6 2 // IDSEL 0x1e Legacy - f000 0 0 1 &i8259 7 2 - f100 0 0 1 &i8259 7 2 + 0xf000 0 0 1 &i8259 7 2 + 0xf100 0 0 1 &i8259 7 2 // IDSEL 0x1f IDE/SATA - f800 0 0 1 &i8259 e 2 - f900 0 0 1 &i8259 5 2 + 0xf800 0 0 1 &i8259 14 2 + 0xf900 0 0 1 &i8259 5 2 >; pcie@0 { @@ -356,37 +390,37 @@ #size-cells = <2>; #address-cells = <3>; device_type = "pci"; - ranges = <02000000 0 80000000 - 02000000 0 80000000 - 0 20000000 + ranges = <0x02000000 0x0 0x80000000 + 0x02000000 0x0 0x80000000 + 0x0 0x20000000 - 01000000 0 00000000 - 01000000 0 00000000 - 0 00100000>; + 0x01000000 0x0 0x00000000 + 0x01000000 0x0 0x00000000 + 0x0 0x00100000>; uli1575@0 { reg = <0 0 0 0 0>; #size-cells = <2>; #address-cells = <3>; - ranges = <02000000 0 80000000 - 02000000 0 80000000 - 0 20000000 - 01000000 0 00000000 - 01000000 0 00000000 - 0 00100000>; + ranges = <0x02000000 0x0 0x80000000 + 0x02000000 0x0 0x80000000 + 0x0 0x20000000 + 0x01000000 0x0 0x00000000 + 0x01000000 0x0 0x00000000 + 0x0 0x00100000>; isa@1e { device_type = "isa"; #interrupt-cells = <2>; #size-cells = <1>; #address-cells = <2>; - reg = <f000 0 0 0 0>; - ranges = <1 0 01000000 0 0 - 00001000>; + reg = <0xf000 0 0 0 0>; + ranges = <1 0 0x01000000 0 0 + 0x00001000>; interrupt-parent = <&i8259>; i8259: interrupt-controller@20 { - reg = <1 20 2 - 1 a0 2 - 1 4d0 2>; + reg = <1 0x20 2 + 1 0xa0 2 + 1 0x4d0 2>; interrupt-controller; device_type = "interrupt-controller"; #address-cells = <0>; @@ -399,8 +433,8 @@ i8042@60 { #size-cells = <0>; #address-cells = <1>; - reg = <1 60 1 1 64 1>; - interrupts = <1 3 c 3>; + reg = <1 0x60 1 1 0x64 1>; + interrupts = <1 3 12 3>; interrupt-parent = <&i8259>; @@ -418,11 +452,11 @@ rtc@70 { compatible = "pnpPNP,b00"; - reg = <1 70 2>; + reg = <1 0x70 2>; }; gpio@400 { - reg = <1 400 80>; + reg = <1 0x400 0x80>; }; }; }; @@ -430,39 +464,40 @@ }; - pcie@f8009000 { + pci1: pcie@f8009000 { + cell-index = <1>; compatible = "fsl,mpc8641-pcie"; device_type = "pci"; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <f8009000 1000>; - bus-range = <0 ff>; - ranges = <02000000 0 a0000000 a0000000 0 20000000 - 01000000 0 00000000 e3000000 0 00100000>; - clock-frequency = <1fca055>; + reg = <0xf8009000 0x1000>; + bus-range = <0 0xff>; + ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 + 0x01000000 0x0 0x00000000 0xe3000000 0x0 0x00100000>; + clock-frequency = <33333333>; interrupt-parent = <&mpic>; - interrupts = <19 2>; - interrupt-map-mask = <f800 0 0 7>; + interrupts = <25 2>; + interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = < /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 4 1 - 0000 0 0 2 &mpic 5 1 - 0000 0 0 3 &mpic 6 1 - 0000 0 0 4 &mpic 7 1 + 0x0000 0 0 1 &mpic 4 1 + 0x0000 0 0 2 &mpic 5 1 + 0x0000 0 0 3 &mpic 6 1 + 0x0000 0 0 4 &mpic 7 1 >; pcie@0 { reg = <0 0 0 0 0>; #size-cells = <2>; #address-cells = <3>; device_type = "pci"; - ranges = <02000000 0 a0000000 - 02000000 0 a0000000 - 0 20000000 + ranges = <0x02000000 0x0 0xa0000000 + 0x02000000 0x0 0xa0000000 + 0x0 0x20000000 - 01000000 0 00000000 - 01000000 0 00000000 - 0 00100000>; + 0x01000000 0x0 0x00000000 + 0x01000000 0x0 0x00000000 + 0x0 0x00100000>; }; }; }; diff --git a/arch/powerpc/boot/dts/mpc866ads.dts b/arch/powerpc/boot/dts/mpc866ads.dts index 90f2293ed3c..daf9433e906 100644 --- a/arch/powerpc/boot/dts/mpc866ads.dts +++ b/arch/powerpc/boot/dts/mpc866ads.dts @@ -12,7 +12,7 @@ / { model = "MPC866ADS"; - compatible = "mpc8xx"; + compatible = "fsl,mpc866ads"; #address-cells = <1>; #size-cells = <1>; @@ -23,15 +23,15 @@ PowerPC,866@0 { device_type = "cpu"; reg = <0>; - d-cache-line-size = <20>; // 32 bytes - i-cache-line-size = <20>; // 32 bytes + d-cache-line-size = <10>; // 16 bytes + i-cache-line-size = <10>; // 16 bytes d-cache-size = <2000>; // L1, 8K i-cache-size = <4000>; // L1, 16K timebase-frequency = <0>; bus-frequency = <0>; clock-frequency = <0>; interrupts = <f 2>; // decrementer interrupt - interrupt-parent = <&Mpc8xx_pic>; + interrupt-parent = <&PIC>; }; }; @@ -40,107 +40,139 @@ reg = <00000000 800000>; }; - soc866@ff000000 { + localbus@ff000100 { + compatible = "fsl,mpc866-localbus", "fsl,pq1-localbus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <ff000100 40>; + + ranges = < + 1 0 ff080000 00008000 + 5 0 ff0a0000 00008000 + >; + + board-control@1,0 { + reg = <1 0 20 5 300 4>; + compatible = "fsl,mpc866ads-bcsr"; + }; + }; + + soc@ff000000 { #address-cells = <1>; #size-cells = <1>; device_type = "soc"; ranges = <0 ff000000 00100000>; reg = <ff000000 00000200>; bus-frequency = <0>; - mdio@e80 { - device_type = "mdio"; - compatible = "fs_enet"; - reg = <e80 8>; + + mdio@e00 { + compatible = "fsl,mpc866-fec-mdio", "fsl,pq1-fec-mdio"; + reg = <e00 188>; #address-cells = <1>; #size-cells = <0>; - phy: ethernet-phy@f { + PHY: ethernet-phy@f { reg = <f>; device_type = "ethernet-phy"; }; }; - fec@e00 { + ethernet@e00 { device_type = "network"; - compatible = "fs_enet"; - model = "FEC"; - device-id = <1>; + compatible = "fsl,mpc866-fec-enet", + "fsl,pq1-fec-enet"; reg = <e00 188>; - mac-address = [ 00 00 0C 00 01 FD ]; + local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <3 1>; - interrupt-parent = <&Mpc8xx_pic>; - phy-handle = <&Phy>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY>; + linux,network-index = <0>; }; - mpc8xx_pic: pic@ff000000 { + PIC: pic@0 { interrupt-controller; - #address-cells = <0>; #interrupt-cells = <2>; reg = <0 24>; - device_type = "mpc8xx-pic"; - compatible = "CPM"; + compatible = "fsl,mpc866-pic", "fsl,pq1-pic"; }; - cpm@ff000000 { + cpm@9c0 { #address-cells = <1>; #size-cells = <1>; - device_type = "cpm"; - model = "CPM"; - ranges = <0 0 4000>; - reg = <860 f0>; - command-proc = <9c0>; + compatible = "fsl,mpc866-cpm", "fsl,cpm1"; + ranges; + reg = <9c0 40>; brg-frequency = <0>; interrupts = <0 2>; // cpm error interrupt - interrupt-parent = <&Cpm_pic>; + interrupt-parent = <&CPM_PIC>; - cpm_pic: pic@930 { + muram@2000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 2000 2000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0 1c00>; + }; + }; + + brg@9f0 { + compatible = "fsl,mpc866-brg", + "fsl,cpm1-brg", + "fsl,cpm-brg"; + reg = <9f0 10>; + clock-frequency = <0>; + }; + + CPM_PIC: pic@930 { interrupt-controller; #address-cells = <0>; - #interrupt-cells = <2>; + #interrupt-cells = <1>; interrupts = <5 2 0 2>; - interrupt-parent = <&Mpc8xx_pic>; + interrupt-parent = <&PIC>; reg = <930 20>; - device_type = "cpm-pic"; - compatible = "CPM"; + compatible = "fsl,mpc866-cpm-pic", + "fsl,cpm1-pic"; }; - smc@a80 { + + serial@a80 { device_type = "serial"; - compatible = "cpm_uart"; - model = "SMC"; - device-id = <1>; + compatible = "fsl,mpc866-smc-uart", + "fsl,cpm1-smc-uart"; reg = <a80 10 3e80 40>; - clock-setup = <00ffffff 0>; - rx-clock = <1>; - tx-clock = <1>; - current-speed = <0>; - interrupts = <4 3>; - interrupt-parent = <&Cpm_pic>; + interrupts = <4>; + interrupt-parent = <&CPM_PIC>; + fsl,cpm-brg = <1>; + fsl,cpm-command = <0090>; }; - smc@a90 { + serial@a90 { device_type = "serial"; - compatible = "cpm_uart"; - model = "SMC"; - device-id = <2>; - reg = <a90 20 3f80 40>; - clock-setup = <ff00ffff 90000>; - rx-clock = <2>; - tx-clock = <2>; - current-speed = <0>; - interrupts = <3 3>; - interrupt-parent = <&Cpm_pic>; + compatible = "fsl,mpc866-smc-uart", + "fsl,cpm1-smc-uart"; + reg = <a90 10 3f80 40>; + interrupts = <3>; + interrupt-parent = <&CPM_PIC>; + fsl,cpm-brg = <2>; + fsl,cpm-command = <00d0>; }; - scc@a00 { + ethernet@a00 { device_type = "network"; - compatible = "fs_enet"; - model = "SCC"; - device-id = <1>; - reg = <a00 18 3c00 80>; - mac-address = [ 00 00 0C 00 03 FD ]; - interrupts = <1e 3>; - interrupt-parent = <&Cpm_pic>; + compatible = "fsl,mpc866-scc-enet", + "fsl,cpm1-scc-enet"; + reg = <a00 18 3c00 100>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <1e>; + interrupt-parent = <&CPM_PIC>; + fsl,cpm-command = <0000>; + linux,network-index = <1>; }; }; }; + + chosen { + linux,stdout-path = "/soc/cpm/serial@a80"; + }; }; diff --git a/arch/powerpc/boot/dts/rainier.dts b/arch/powerpc/boot/dts/rainier.dts new file mode 100644 index 00000000000..d3c2ac394ce --- /dev/null +++ b/arch/powerpc/boot/dts/rainier.dts @@ -0,0 +1,353 @@ +/* + * Device Tree Source for AMCC Rainier + * + * Based on Sequoia code + * Copyright (c) 2007 MontaVista Software, Inc. + * + * FIXME: Draft only! + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + * + */ + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "amcc,rainier"; + compatible = "amcc,rainier"; + dcr-parent = <&/cpus/cpu@0>; + + aliases { + ethernet0 = &EMAC0; + ethernet1 = &EMAC1; + serial0 = &UART0; + serial1 = &UART1; + serial2 = &UART2; + serial3 = &UART3; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,440GRx"; + reg = <0>; + clock-frequency = <0>; /* Filled in by zImage */ + timebase-frequency = <0>; /* Filled in by zImage */ + i-cache-line-size = <20>; + d-cache-line-size = <20>; + i-cache-size = <8000>; + d-cache-size = <8000>; + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0 0>; /* Filled in by zImage */ + }; + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-440grx","ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0c0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-440grx","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0d0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <1e 4 1f 4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC2: interrupt-controller2 { + compatible = "ibm,uic-440grx","ibm,uic"; + interrupt-controller; + cell-index = <2>; + dcr-reg = <0e0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <1c 4 1d 4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + SDR0: sdr { + compatible = "ibm,sdr-440grx", "ibm,sdr-440ep"; + dcr-reg = <00e 002>; + }; + + CPR0: cpr { + compatible = "ibm,cpr-440grx", "ibm,cpr-440ep"; + dcr-reg = <00c 002>; + }; + + plb { + compatible = "ibm,plb-440grx", "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by zImage */ + + SDRAM0: sdram { + compatible = "ibm,sdram-440grx", "ibm,sdram-44x-ddr2denali"; + dcr-reg = <010 2>; + }; + + DMA0: dma { + compatible = "ibm,dma-440grx", "ibm,dma-4xx"; + dcr-reg = <100 027>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-440grx", "ibm,mcmal2"; + dcr-reg = <180 62>; + num-tx-chans = <2>; + num-rx-chans = <2>; + interrupt-parent = <&MAL0>; + interrupts = <0 1 2 3 4>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*TXEOB*/ 0 &UIC0 a 4 + /*RXEOB*/ 1 &UIC0 b 4 + /*SERR*/ 2 &UIC1 0 4 + /*TXDE*/ 3 &UIC1 1 4 + /*RXDE*/ 4 &UIC1 2 4>; + interrupt-map-mask = <ffffffff>; + }; + + POB0: opb { + compatible = "ibm,opb-440grx", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <00000000 1 00000000 80000000 + 80000000 1 80000000 80000000>; + interrupt-parent = <&UIC1>; + interrupts = <7 4>; + clock-frequency = <0>; /* Filled in by zImage */ + + EBC0: ebc { + compatible = "ibm,ebc-440grx", "ibm,ebc"; + dcr-reg = <012 2>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by zImage */ + interrupts = <5 1>; + interrupt-parent = <&UIC1>; + + nor_flash@0,0 { + compatible = "amd,s29gl256n", "cfi-flash"; + bank-width = <2>; + reg = <0 000000 4000000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "Kernel"; + reg = <0 180000>; + }; + partition@180000 { + label = "ramdisk"; + reg = <180000 200000>; + }; + partition@380000 { + label = "file system"; + reg = <380000 3aa0000>; + }; + partition@3e20000 { + label = "kozio"; + reg = <3e20000 140000>; + }; + partition@3f60000 { + label = "env"; + reg = <3f60000 40000>; + }; + partition@3fa0000 { + label = "u-boot"; + reg = <3fa0000 60000>; + }; + }; + + }; + + UART0: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600300 8>; + virtual-reg = <ef600300>; + clock-frequency = <0>; /* Filled in by zImage */ + current-speed = <1c200>; + interrupt-parent = <&UIC0>; + interrupts = <0 4>; + }; + + UART1: serial@ef600400 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600400 8>; + virtual-reg = <ef600400>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <1 4>; + }; + + UART2: serial@ef600500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600500 8>; + virtual-reg = <ef600500>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC1>; + interrupts = <3 4>; + }; + + UART3: serial@ef600600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600600 8>; + virtual-reg = <ef600600>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC1>; + interrupts = <4 4>; + }; + + IIC0: i2c@ef600700 { + device_type = "i2c"; + compatible = "ibm,iic-440grx", "ibm,iic"; + reg = <ef600700 14>; + interrupt-parent = <&UIC0>; + interrupts = <2 4>; + }; + + IIC1: i2c@ef600800 { + device_type = "i2c"; + compatible = "ibm,iic-440grx", "ibm,iic"; + reg = <ef600800 14>; + interrupt-parent = <&UIC0>; + interrupts = <7 4>; + }; + + ZMII0: emac-zmii@ef600d00 { + device_type = "zmii-interface"; + compatible = "ibm,zmii-440grx", "ibm,zmii"; + reg = <ef600d00 c>; + }; + + RGMII0: emac-rgmii@ef601000 { + device_type = "rgmii-interface"; + compatible = "ibm,rgmii-440grx", "ibm,rgmii"; + reg = <ef601000 8>; + has-mdio; + }; + + EMAC0: ethernet@ef600e00 { + linux,network-index = <0>; + device_type = "network"; + compatible = "ibm,emac-440grx", "ibm,emac-440epx", "ibm,emac4"; + interrupt-parent = <&EMAC0>; + interrupts = <0 1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0 &UIC0 18 4 + /*Wake*/ 1 &UIC1 1d 4>; + reg = <ef600e00 70>; + local-mac-address = [000000000000]; + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <5dc>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rgmii"; + phy-map = <00000000>; + zmii-device = <&ZMII0>; + zmii-channel = <0>; + rgmii-device = <&RGMII0>; + rgmii-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + + EMAC1: ethernet@ef600f00 { + linux,network-index = <1>; + device_type = "network"; + compatible = "ibm,emac-440grx", "ibm,emac-440epx", "ibm,emac4"; + interrupt-parent = <&EMAC1>; + interrupts = <0 1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0 &UIC0 19 4 + /*Wake*/ 1 &UIC1 1f 4>; + reg = <ef600f00 70>; + local-mac-address = [000000000000]; + mal-device = <&MAL0>; + mal-tx-channel = <1>; + mal-rx-channel = <1>; + cell-index = <1>; + max-frame-size = <5dc>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rgmii"; + phy-map = <00000000>; + zmii-device = <&ZMII0>; + zmii-channel = <1>; + rgmii-device = <&RGMII0>; + rgmii-channel = <1>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + }; + + PCI0: pci@1ec000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb440grx-pci", "ibm,plb-pci"; + primary; + reg = <1 eec00000 8 /* Config space access */ + 1 eed00000 4 /* IACK */ + 1 eed00000 4 /* Special cycle */ + 1 ef400000 40>; /* Internal registers */ + + /* Outbound ranges, one memory and one IO, + * later cannot be changed. Chip supports a second + * IO range but we don't use it for now + */ + ranges = <02000000 0 80000000 1 80000000 0 10000000 + 01000000 0 00000000 1 e8000000 0 00100000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <42000000 0 0 0 0 0 80000000>; + + /* All PCI interrupts are routed to IRQ 67 */ + interrupt-map-mask = <0000 0 0 0>; + interrupt-map = < 0000 0 0 0 &UIC2 3 8 >; + }; + }; + + chosen { + linux,stdout-path = "/plb/opb/serial@ef600300"; + bootargs = "console=ttyS0,115200"; + }; +}; diff --git a/arch/powerpc/boot/dts/sbc8349.dts b/arch/powerpc/boot/dts/sbc8349.dts new file mode 100644 index 00000000000..3839d4b7d6a --- /dev/null +++ b/arch/powerpc/boot/dts/sbc8349.dts @@ -0,0 +1,244 @@ +/* + * SBC8349E Device Tree Source + * + * Copyright 2007 Wind River Inc. + * + * Paul Gortmaker (see MAINTAINERS for contact information) + * + * -based largely on the Freescale MPC834x_MDS dts. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "SBC8349E"; + compatible = "SBC834xE"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8349@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; // 256MB at 0 + }; + + soc8349@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0x0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00000200>; + bus-frequency = <0>; + + wdt@200 { + compatible = "mpc83xx_wdt"; + reg = <0x200 0x100>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <15 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + }; + + spi@7000 { + cell-index = <0>; + compatible = "fsl,spi"; + reg = <0x7000 0x1000>; + interrupts = <16 0x8>; + interrupt-parent = <&ipic>; + mode = "cpu"; + }; + + /* phy type (ULPI or SERIAL) are only types supported for MPH */ + /* port = 0 or 1 */ + usb@22000 { + compatible = "fsl-usb2-mph"; + reg = <0x22000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&ipic>; + interrupts = <39 0x8>; + phy_type = "ulpi"; + port1; + }; + /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ + usb@23000 { + device_type = "usb"; + compatible = "fsl-usb2-dr"; + reg = <0x23000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&ipic>; + interrupts = <38 0x8>; + dr_mode = "otg"; + phy_type = "ulpi"; + }; + + mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x24520 0x20>; + + phy0: ethernet-phy@19 { + interrupt-parent = <&ipic>; + interrupts = <20 0x8>; + reg = <0x19>; + device_type = "ethernet-phy"; + }; + phy1: ethernet-phy@1a { + interrupt-parent = <&ipic>; + interrupts = <21 0x8>; + reg = <0x1a>; + device_type = "ethernet-phy"; + }; + }; + + enet0: ethernet@24000 { + cell-index = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <32 0x8 33 0x8 34 0x8>; + interrupt-parent = <&ipic>; + phy-handle = <&phy0>; + linux,network-index = <0>; + }; + + enet1: ethernet@25000 { + cell-index = <1>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 0x8 36 0x8 37 0x8>; + interrupt-parent = <&ipic>; + phy-handle = <&phy1>; + linux,network-index = <1>; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <9 0x8>; + interrupt-parent = <&ipic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <10 0x8>; + interrupt-parent = <&ipic>; + }; + + /* May need to remove if on a part without crypto engine */ + crypto@30000 { + model = "SEC2"; + compatible = "talitos"; + reg = <0x30000 0x10000>; + interrupts = <11 0x8>; + interrupt-parent = <&ipic>; + num-channels = <4>; + channel-fifo-len = <24>; + exec-units-mask = <0x0000007e>; + /* desc mask is for rev2.0, + * we need runtime fixup for >2.0 */ + descriptor-types-mask = <0x01010ebf>; + }; + + /* IPIC + * interrupts cell = <intr #, sense> + * sense values match linux IORESOURCE_IRQ_* defines: + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + ipic: pic@700 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x700 0x100>; + device_type = "ipic"; + }; + }; + + pci0: pci@e0008500 { + cell-index = <1>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x11 */ + 0x8800 0x0 0x0 0x1 &ipic 20 0x8 + 0x8800 0x0 0x0 0x2 &ipic 21 0x8 + 0x8800 0x0 0x0 0x3 &ipic 22 0x8 + 0x8800 0x0 0x0 0x4 &ipic 23 0x8>; + + interrupt-parent = <&ipic>; + interrupts = <0x42 0x8>; + bus-range = <0 0>; + ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 + 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>; + clock-frequency = <66666666>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008500 0x100>; + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + }; +}; diff --git a/arch/powerpc/boot/dts/sbc8548.dts b/arch/powerpc/boot/dts/sbc8548.dts new file mode 100644 index 00000000000..14be38ad5d4 --- /dev/null +++ b/arch/powerpc/boot/dts/sbc8548.dts @@ -0,0 +1,244 @@ +/* + * SBC8548 Device Tree Source + * + * Copyright 2007 Wind River Systems Inc. + * + * Paul Gortmaker (see MAINTAINERS for contact information) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + + +/dts-v1/; + +/ { + model = "SBC8548"; + compatible = "SBC8548"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + /* pci1 doesn't have a corresponding physical connector */ + pci2 = &pci2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8548@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <0x20>; // 32 bytes + i-cache-line-size = <0x20>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <0>; // From uboot + bus-frequency = <0>; + clock-frequency = <0>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + soc8548@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0x00000000 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00001000>; // CCSRBAR + bus-frequency = <0>; + + memory-controller@2000 { + compatible = "fsl,8548-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <0x12 0x2>; + }; + + l2-cache-controller@20000 { + compatible = "fsl,8548-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <0x20>; // 32 bytes + cache-size = <0x80000>; // L2, 512K + interrupt-parent = <&mpic>; + interrupts = <0x10 0x2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <0x2b 0x2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <0x2b 0x2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x24520 0x20>; + + phy0: ethernet-phy@19 { + interrupt-parent = <&mpic>; + interrupts = <0x6 0x1>; + reg = <0x19>; + device_type = "ethernet-phy"; + }; + phy1: ethernet-phy@1a { + interrupt-parent = <&mpic>; + interrupts = <0x7 0x1>; + reg = <0x1a>; + device_type = "ethernet-phy"; + }; + }; + + enet0: ethernet@24000 { + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy0>; + }; + + enet1: ethernet@25000 { + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy1>; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4500 0x100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <0x2a 0x2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4600 0x100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <0x2a 0x2>; + interrupt-parent = <&mpic>; + }; + + global-utilities@e0000 { //global utilities reg + compatible = "fsl,mpc8548-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + big-endian; + }; + }; + + pci0: pci@e0008000 { + cell-index = <0>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x01 (PCI-X slot) */ + 0x0800 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x0800 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x0800 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x0800 0x0 0x0 0x4 &mpic 0x3 0x1>; + + interrupt-parent = <&mpic>; + interrupts = <0x18 0x2>; + bus-range = <0 0>; + ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00800000>; + clock-frequency = <66666666>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008000 0x1000>; + compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; + device_type = "pci"; + }; + + pci2: pcie@e000a000 { + cell-index = <2>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x0 (PEX) */ + 0x0000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x0000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x0000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x0000 0x0 0x0 0x4 &mpic 0x3 0x1>; + + interrupt-parent = <&mpic>; + interrupts = <0x1a 0x2>; + bus-range = <0x0 0xff>; + ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 + 0x01000000 0x0 0x00000000 0xe3000000 0x0 0x08000000>; + clock-frequency = <33333333>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe000a000 0x1000>; + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + pcie@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x02000000 0x0 0xa0000000 + 0x02000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x01000000 0x0 0x00000000 + 0x01000000 0x0 0x00000000 + 0x0 0x08000000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/sbc8560.dts b/arch/powerpc/boot/dts/sbc8560.dts new file mode 100644 index 00000000000..0476802fba6 --- /dev/null +++ b/arch/powerpc/boot/dts/sbc8560.dts @@ -0,0 +1,330 @@ +/* + * SBC8560 Device Tree Source + * + * Copyright 2007 Wind River Systems Inc. + * + * Paul Gortmaker (see MAINTAINERS for contact information) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "SBC8560"; + compatible = "SBC8560"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8560@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <0x20>; // 32 bytes + i-cache-line-size = <0x20>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <0>; // From uboot + bus-frequency = <0>; + clock-frequency = <0>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; + }; + + soc@ff700000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0x0 0xff700000 0x00100000>; + reg = <0xff700000 0x00100000>; + clock-frequency = <0>; + + memory-controller@2000 { + compatible = "fsl,8560-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <0x12 0x2>; + }; + + l2-cache-controller@20000 { + compatible = "fsl,8560-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <0x20>; // 32 bytes + cache-size = <0x40000>; // L2, 256K + interrupt-parent = <&mpic>; + interrupts = <0x10 0x2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <0x2b 0x2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <0x2b 0x2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x24520 0x20>; + phy0: ethernet-phy@19 { + interrupt-parent = <&mpic>; + interrupts = <0x6 0x1>; + reg = <0x19>; + device_type = "ethernet-phy"; + }; + phy1: ethernet-phy@1a { + interrupt-parent = <&mpic>; + interrupts = <0x7 0x1>; + reg = <0x1a>; + device_type = "ethernet-phy"; + }; + phy2: ethernet-phy@1b { + interrupt-parent = <&mpic>; + interrupts = <0x8 0x1>; + reg = <0x1b>; + device_type = "ethernet-phy"; + }; + phy3: ethernet-phy@1c { + interrupt-parent = <&mpic>; + interrupts = <0x8 0x1>; + reg = <0x1c>; + device_type = "ethernet-phy"; + }; + }; + + enet0: ethernet@24000 { + cell-index = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy0>; + }; + + enet1: ethernet@25000 { + cell-index = <1>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy1>; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + device_type = "open-pic"; + }; + + cpm@919c0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8560-cpm", "fsl,cpm2"; + reg = <0x919c0 0x30>; + ranges; + + muram@80000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x80000 0x10000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0x0 0x4000 0x9000 0x2000>; + }; + }; + + brg@919f0 { + compatible = "fsl,mpc8560-brg", + "fsl,cpm2-brg", + "fsl,cpm-brg"; + reg = <0x919f0 0x10 0x915f0 0x10>; + clock-frequency = <165000000>; + }; + + cpmpic: pic@90c00 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x2e 0x2>; + interrupt-parent = <&mpic>; + reg = <0x90c00 0x80>; + compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic"; + }; + + enet2: ethernet@91320 { + device_type = "network"; + compatible = "fsl,mpc8560-fcc-enet", + "fsl,cpm2-fcc-enet"; + reg = <0x91320 0x20 0x88500 0x100 0x913b0 0x1>; + local-mac-address = [ 00 00 00 00 00 00 ]; + fsl,cpm-command = <0x16200300>; + interrupts = <0x21 0x8>; + interrupt-parent = <&cpmpic>; + phy-handle = <&phy2>; + }; + + enet3: ethernet@91340 { + device_type = "network"; + compatible = "fsl,mpc8560-fcc-enet", + "fsl,cpm2-fcc-enet"; + reg = <0x91340 0x20 0x88600 0x100 0x913d0 0x1>; + local-mac-address = [ 00 00 00 00 00 00 ]; + fsl,cpm-command = <0x1a400300>; + interrupts = <0x22 0x8>; + interrupt-parent = <&cpmpic>; + phy-handle = <&phy3>; + }; + }; + + global-utilities@e0000 { + compatible = "fsl,mpc8560-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + }; + + pci0: pci@ff708000 { + cell-index = <0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; + device_type = "pci"; + reg = <0xff708000 0x1000>; + clock-frequency = <66666666>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x02 */ + 0x1000 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x1000 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x1000 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x1000 0x0 0x0 0x4 &mpic 0x5 0x1>; + + interrupt-parent = <&mpic>; + interrupts = <0x18 0x2>; + bus-range = <0x0 0x0>; + ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000 + 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>; + }; + + localbus@ff705000 { + compatible = "fsl,mpc8560-localbus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0xff705000 0x100>; // BRx, ORx, etc. + + ranges = < + 0x0 0x0 0xff800000 0x0800000 // 8MB boot flash + 0x1 0x0 0xe4000000 0x4000000 // 64MB flash + 0x3 0x0 0x20000000 0x4000000 // 64MB SDRAM + 0x4 0x0 0x24000000 0x4000000 // 64MB SDRAM + 0x5 0x0 0xfc000000 0x0c00000 // EPLD + 0x6 0x0 0xe0000000 0x4000000 // 64MB flash + 0x7 0x0 0x80000000 0x0200000 // ATM1,2 + >; + + epld@5,0 { + compatible = "wrs,epld-localbus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0x5 0x0 0xc00000>; + ranges = < + 0x0 0x0 0x5 0x000000 0x1fff // LED disp. + 0x1 0x0 0x5 0x100000 0x1fff // switches + 0x2 0x0 0x5 0x200000 0x1fff // ID reg. + 0x3 0x0 0x5 0x300000 0x1fff // status reg. + 0x4 0x0 0x5 0x400000 0x1fff // reset reg. + 0x5 0x0 0x5 0x500000 0x1fff // Wind port + 0x7 0x0 0x5 0x700000 0x1fff // UART #1 + 0x8 0x0 0x5 0x800000 0x1fff // UART #2 + 0x9 0x0 0x5 0x900000 0x1fff // RTC + 0xb 0x0 0x5 0xb00000 0x1fff // EEPROM + >; + + bidr@2,0 { + compatible = "wrs,sbc8560-bidr"; + reg = <0x2 0x0 0x10>; + }; + + bcsr@3,0 { + compatible = "wrs,sbc8560-bcsr"; + reg = <0x3 0x0 0x10>; + }; + + brstcr@4,0 { + compatible = "wrs,sbc8560-brstcr"; + reg = <0x4 0x0 0x10>; + }; + + serial0: serial@7,0 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0x7 0x0 0x100>; + clock-frequency = <1843200>; + interrupts = <0x9 0x2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@8,0 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0x8 0x0 0x100>; + clock-frequency = <1843200>; + interrupts = <0xa 0x2>; + interrupt-parent = <&mpic>; + }; + + rtc@9,0 { + compatible = "m48t59"; + reg = <0x9 0x0 0x1fff>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/sequoia.dts b/arch/powerpc/boot/dts/sequoia.dts index 10784ff45dd..d9046c1adcb 100644 --- a/arch/powerpc/boot/dts/sequoia.dts +++ b/arch/powerpc/boot/dts/sequoia.dts @@ -17,14 +17,24 @@ #size-cells = <1>; model = "amcc,sequoia"; compatible = "amcc,sequoia"; - dcr-parent = <&/cpus/PowerPC,440EPx@0>; + dcr-parent = <&/cpus/cpu@0>; + + aliases { + ethernet0 = &EMAC0; + ethernet1 = &EMAC1; + serial0 = &UART0; + serial1 = &UART1; + serial2 = &UART2; + serial3 = &UART3; + }; cpus { #address-cells = <1>; #size-cells = <0>; - PowerPC,440EPx@0 { + cpu@0 { device_type = "cpu"; + model = "PowerPC,440EPx"; reg = <0>; clock-frequency = <0>; /* Filled in by zImage */ timebase-frequency = <0>; /* Filled in by zImage */ @@ -94,7 +104,6 @@ clock-frequency = <0>; /* Filled in by zImage */ SDRAM0: sdram { - device_type = "memory-controller"; compatible = "ibm,sdram-440epx", "ibm,sdram-44x-ddr2denali"; dcr-reg = <010 2>; }; @@ -122,6 +131,13 @@ interrupt-map-mask = <ffffffff>; }; + USB1: usb@e0000400 { + compatible = "ohci-be"; + reg = <0 e0000400 60>; + interrupt-parent = <&UIC0>; + interrupts = <15 8>; + }; + POB0: opb { compatible = "ibm,opb-440epx", "ibm,opb"; #address-cells = <1>; @@ -308,6 +324,33 @@ has-new-stacr-staopc; }; }; + + PCI0: pci@1ec000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb440epx-pci", "ibm,plb-pci"; + primary; + reg = <1 eec00000 8 /* Config space access */ + 1 eed00000 4 /* IACK */ + 1 eed00000 4 /* Special cycle */ + 1 ef400000 40>; /* Internal registers */ + + /* Outbound ranges, one memory and one IO, + * later cannot be changed. Chip supports a second + * IO range but we don't use it for now + */ + ranges = <02000000 0 80000000 1 80000000 0 10000000 + 01000000 0 00000000 1 e8000000 0 00100000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <42000000 0 0 0 0 0 80000000>; + + /* All PCI interrupts are routed to IRQ 67 */ + interrupt-map-mask = <0000 0 0 0>; + interrupt-map = < 0000 0 0 0 &UIC2 3 8 >; + }; }; chosen { diff --git a/arch/powerpc/boot/dts/storcenter.dts b/arch/powerpc/boot/dts/storcenter.dts new file mode 100644 index 00000000000..2204874ac5f --- /dev/null +++ b/arch/powerpc/boot/dts/storcenter.dts @@ -0,0 +1,141 @@ +/* + * Device Tree Source for IOMEGA StorCenter + * + * Copyright 2007 Oyvind Repvik + * Copyright 2007 Jon Loeliger + * + * Based on the Kurobox DTS by G. Liakhovetski <g.liakhovetski@gmx.de> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/ { + model = "StorCenter"; + compatible = "storcenter"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8241@0 { + device_type = "cpu"; + reg = <0>; + clock-frequency = <200000000>; + timebase-frequency = <25000000>; + bus-frequency = <0>; /* from bootwrapper */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <16384>; + d-cache-size = <16384>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x04000000>; /* 64MB @ 0x0 */ + }; + + soc@fc000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8241", "mpc10x"; + store-gathering = <0>; /* 0 == off, !0 == on */ + ranges = <0x0 0xfc000000 0x100000>; + reg = <0xfc000000 0x100000>; /* EUMB */ + bus-frequency = <0>; /* fixed by loader */ + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <5 2>; + interrupt-parent = <&mpic>; + + rtc@68 { + compatible = "dallas,ds1337"; + reg = <68>; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4500 0x20>; + clock-frequency = <97553800>; /* Hz */ + current-speed = <115200>; + interrupts = <9 2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4600 0x20>; + clock-frequency = <97553800>; /* Hz */ + current-speed = <9600>; + interrupts = <10 2>; + interrupt-parent = <&mpic>; + }; + + mpic: interrupt-controller@40000 { + #interrupt-cells = <2>; + device_type = "open-pic"; + compatible = "chrp,open-pic"; + interrupt-controller; + reg = <0x40000 0x40000>; + }; + + }; + + pci0: pci@fe800000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "mpc10x-pci"; + reg = <0xfe800000 0x1000>; + ranges = <0x01000000 0x0 0x0 0xfe000000 0x0 0x00c00000 + 0x02000000 0x0 0x80000000 0x80000000 0x0 0x70000000>; + bus-range = <0 0xff>; + clock-frequency = <97553800>; + interrupt-parent = <&mpic>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 13 - IDE */ + 0x6800 0 0 1 &mpic 0 1 + 0x6800 0 0 2 &mpic 0 1 + 0x6800 0 0 3 &mpic 0 1 + 0x6800 0 0 4 &mpic 0 1 + /* IDSEL 14 - USB */ + 0x7000 0 0 1 &mpic 0 1 + 0x7000 0 0 2 &mpic 0 1 + 0x7000 0 0 3 &mpic 0 1 + 0x7000 0 0 4 &mpic 0 1 + /* IDSEL 15 - ETH */ + 0x7800 0 0 1 &mpic 0 1 + 0x7800 0 0 2 &mpic 0 1 + 0x7800 0 0 3 &mpic 0 1 + 0x7800 0 0 4 &mpic 0 1 + >; + }; + + chosen { + linux,stdout-path = "/soc/serial@4500"; + }; +}; diff --git a/arch/powerpc/boot/dts/stx_gp3_8560.dts b/arch/powerpc/boot/dts/stx_gp3_8560.dts new file mode 100644 index 00000000000..f81fd7fdb29 --- /dev/null +++ b/arch/powerpc/boot/dts/stx_gp3_8560.dts @@ -0,0 +1,228 @@ +/* + * STX GP3 - 8560 ADS Device Tree Source + * + * Copyright 2008 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "stx,gp3"; + compatible = "stx,gp3-8560", "stx,gp3"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8560@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + soc@fdf00000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0 0xfdf00000 0x100000>; + reg = <0xfdf00000 0x1000>; + bus-frequency = <0>; + compatible = "fsl,mpc8560-immr", "simple-bus"; + + memory-controller@2000 { + compatible = "fsl,8540-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + l2-cache-controller@20000 { + compatible = "fsl,8540-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; + cache-size = <0x40000>; // L2, 256K + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x24520 0x20>; + + phy2: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <5 4>; + reg = <2>; + device_type = "ethernet-phy"; + }; + phy4: ethernet-phy@4 { + interrupt-parent = <&mpic>; + interrupts = <5 4>; + reg = <4>; + device_type = "ethernet-phy"; + }; + }; + + enet0: ethernet@24000 { + cell-index = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy2>; + }; + + enet1: ethernet@25000 { + cell-index = <1>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 36 2 40 2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy4>; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + device_type = "open-pic"; + }; + + cpm@919c0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8560-cpm", "fsl,cpm2", "simple-bus"; + reg = <0x919c0 0x30>; + ranges; + + muram@80000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x80000 0x10000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0 0x4000 0x9000 0x2000>; + }; + }; + + brg@919f0 { + compatible = "fsl,mpc8560-brg", + "fsl,cpm2-brg", + "fsl,cpm-brg"; + reg = <0x919f0 0x10 0x915f0 0x10>; + clock-frequency = <0>; + }; + + cpmpic: pic@90c00 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + interrupts = <46 2>; + interrupt-parent = <&mpic>; + reg = <0x90c00 0x80>; + compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic"; + }; + + serial0: serial@91a20 { + device_type = "serial"; + compatible = "fsl,mpc8560-scc-uart", + "fsl,cpm2-scc-uart"; + reg = <0x91a20 0x20 0x88100 0x100>; + fsl,cpm-brg = <2>; + fsl,cpm-command = <0x4a00000>; + interrupts = <41 8>; + interrupt-parent = <&cpmpic>; + }; + }; + }; + + pci0: pci@fdf08000 { + cell-index = <0>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x0c */ + 0x6000 0 0 1 &mpic 1 1 + 0x6000 0 0 2 &mpic 2 1 + 0x6000 0 0 3 &mpic 3 1 + 0x6000 0 0 4 &mpic 4 1 + + /* IDSEL 0x0d */ + 0x6800 0 0 1 &mpic 4 1 + 0x6800 0 0 2 &mpic 1 1 + 0x6800 0 0 3 &mpic 2 1 + 0x6800 0 0 4 &mpic 3 1 + + /* IDSEL 0x0e */ + 0x7000 0 0 1 &mpic 3 1 + 0x7000 0 0 2 &mpic 4 1 + 0x7000 0 0 3 &mpic 1 1 + 0x7000 0 0 4 &mpic 2 1 + + /* IDSEL 0x0f */ + 0x7800 0 0 1 &mpic 2 1 + 0x7800 0 0 2 &mpic 3 1 + 0x7800 0 0 3 &mpic 4 1 + 0x7800 0 0 4 &mpic 1 1>; + + interrupt-parent = <&mpic>; + interrupts = <24 2>; + bus-range = <0 0>; + ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000 + 0x01000000 0 0x00000000 0xe2000000 0 0x00100000>; + clock-frequency = <66666666>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xfdf08000 0x1000>; + compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; + device_type = "pci"; + }; +}; diff --git a/arch/powerpc/boot/dts/taishan.dts b/arch/powerpc/boot/dts/taishan.dts new file mode 100644 index 00000000000..0706a4a13b9 --- /dev/null +++ b/arch/powerpc/boot/dts/taishan.dts @@ -0,0 +1,383 @@ +/* + * Device Tree Source for IBM/AMCC Taishan + * + * Copyright 2007 IBM Corp. + * Hugh Blemings <hugh@au.ibm.com> based off code by + * Josh Boyer <jwboyer@linux.vnet.ibm.com>, David Gibson <dwg@au1.ibm.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "amcc,taishan"; + compatible = "amcc,taishan"; + dcr-parent = <&/cpus/cpu@0>; + + aliases { + ethernet0 = &EMAC2; + ethernet1 = &EMAC3; + serial0 = &UART0; + serial1 = &UART1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,440GX"; + reg = <0>; + clock-frequency = <2FAF0800>; // 800MHz + timebase-frequency = <0>; // Filled in by zImage + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <8000>; /* 32 kB */ + d-cache-size = <8000>; /* 32 kB */ + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0 0>; // Filled in by zImage + }; + + + UICB0: interrupt-controller-base { + compatible = "ibm,uic-440gx", "ibm,uic"; + interrupt-controller; + cell-index = <3>; + dcr-reg = <200 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-440gx", "ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0c0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <01 4 00 4>; /* cascade - first non-critical */ + interrupt-parent = <&UICB0>; + + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-440gx", "ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0d0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <03 4 02 4>; /* cascade */ + interrupt-parent = <&UICB0>; + }; + + UIC2: interrupt-controller2 { + compatible = "ibm,uic-440gx", "ibm,uic"; + interrupt-controller; + cell-index = <2>; /* was 1 */ + dcr-reg = <210 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <05 4 04 4>; /* cascade */ + interrupt-parent = <&UICB0>; + }; + + + CPC0: cpc { + compatible = "ibm,cpc-440gp"; + dcr-reg = <0b0 003 0e0 010>; + // FIXME: anything else? + }; + + plb { + compatible = "ibm,plb-440gx", "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <9896800>; // 160MHz + + SDRAM0: memory-controller { + compatible = "ibm,sdram-440gp"; + dcr-reg = <010 2>; + // FIXME: anything else? + }; + + SRAM0: sram { + compatible = "ibm,sram-440gp"; + dcr-reg = <020 8 00a 1>; + }; + + DMA0: dma { + // FIXME: ??? + compatible = "ibm,dma-440gp"; + dcr-reg = <100 027>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-440gx", "ibm,mcmal2"; + dcr-reg = <180 62>; + num-tx-chans = <4>; + num-rx-chans = <4>; + interrupt-parent = <&MAL0>; + interrupts = <0 1 2 3 4>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*TXEOB*/ 0 &UIC0 a 4 + /*RXEOB*/ 1 &UIC0 b 4 + /*SERR*/ 2 &UIC1 0 4 + /*TXDE*/ 3 &UIC1 1 4 + /*RXDE*/ 4 &UIC1 2 4>; + interrupt-map-mask = <ffffffff>; + }; + + POB0: opb { + compatible = "ibm,opb-440gx", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + /* Wish there was a nicer way of specifying a full 32-bit + range */ + ranges = <00000000 1 00000000 80000000 + 80000000 1 80000000 80000000>; + dcr-reg = <090 00b>; + interrupt-parent = <&UIC1>; + interrupts = <7 4>; + clock-frequency = <4C4B400>; // 80MHz + + + EBC0: ebc { + compatible = "ibm,ebc-440gx", "ibm,ebc"; + dcr-reg = <012 2>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <4C4B400>; // 80MHz + + /* ranges property is supplied by zImage + * based on firmware's configuration of the + * EBC bridge */ + + interrupts = <5 4>; + interrupt-parent = <&UIC1>; + + /* TODO: Add other EBC devices */ + }; + + + + UART0: serial@40000200 { + device_type = "serial"; + compatible = "ns16550"; + reg = <40000200 8>; + virtual-reg = <e0000200>; + clock-frequency = <A8C000>; + current-speed = <1C200>; /* 115200 */ + interrupt-parent = <&UIC0>; + interrupts = <0 4>; + }; + + UART1: serial@40000300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <40000300 8>; + virtual-reg = <e0000300>; + clock-frequency = <A8C000>; + current-speed = <1C200>; /* 115200 */ + interrupt-parent = <&UIC0>; + interrupts = <1 4>; + }; + + IIC0: i2c@40000400 { + /* FIXME */ + device_type = "i2c"; + compatible = "ibm,iic-440gp", "ibm,iic"; + reg = <40000400 14>; + interrupt-parent = <&UIC0>; + interrupts = <2 4>; + }; + IIC1: i2c@40000500 { + /* FIXME */ + device_type = "i2c"; + compatible = "ibm,iic-440gp", "ibm,iic"; + reg = <40000500 14>; + interrupt-parent = <&UIC0>; + interrupts = <3 4>; + }; + + GPIO0: gpio@40000700 { + /* FIXME */ + compatible = "ibm,gpio-440gp"; + reg = <40000700 20>; + }; + + ZMII0: emac-zmii@40000780 { + device_type = "zgmii-interface"; + compatible = "ibm,zmii-440gx", "ibm,zmii"; + reg = <40000780 c>; + }; + + RGMII0: emac-rgmii@40000790 { + device_type = "rgmii-interface"; + compatible = "ibm,rgmii"; + reg = <40000790 8>; + }; + + + EMAC0: ethernet@40000800 { + unused = <1>; + linux,network-index = <2>; + device_type = "network"; + compatible = "ibm,emac-440gx", "ibm,emac4"; + interrupt-parent = <&UIC1>; + interrupts = <1c 4 1d 4>; + reg = <40000800 70>; + local-mac-address = [000000000000]; // Filled in by zImage + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <5dc>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rmii"; + phy-map = <00000001>; + zmii-device = <&ZMII0>; + zmii-channel = <0>; + }; + EMAC1: ethernet@40000900 { + unused = <1>; + linux,network-index = <3>; + device_type = "network"; + compatible = "ibm,emac-440gx", "ibm,emac4"; + interrupt-parent = <&UIC1>; + interrupts = <1e 4 1f 4>; + reg = <40000900 70>; + local-mac-address = [000000000000]; // Filled in by zImage + mal-device = <&MAL0>; + mal-tx-channel = <1>; + mal-rx-channel = <1>; + cell-index = <1>; + max-frame-size = <5dc>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rmii"; + phy-map = <00000001>; + zmii-device = <&ZMII0>; + zmii-channel = <1>; + }; + + EMAC2: ethernet@40000c00 { + linux,network-index = <0>; + device_type = "network"; + compatible = "ibm,emac-440gx", "ibm,emac4"; + interrupt-parent = <&UIC2>; + interrupts = <0 4 1 4>; + reg = <40000c00 70>; + local-mac-address = [000000000000]; // Filled in by zImage + mal-device = <&MAL0>; + mal-tx-channel = <2>; + mal-rx-channel = <2>; + cell-index = <2>; + max-frame-size = <5dc>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rgmii"; + phy-map = <00000001>; + rgmii-device = <&RGMII0>; + rgmii-channel = <0>; + zmii-device = <&ZMII0>; + zmii-channel = <2>; + }; + + EMAC3: ethernet@40000e00 { + linux,network-index = <1>; + device_type = "network"; + compatible = "ibm,emac-440gx", "ibm,emac4"; + interrupt-parent = <&UIC2>; + interrupts = <2 4 3 4>; + reg = <40000e00 70>; + local-mac-address = [000000000000]; // Filled in by zImage + mal-device = <&MAL0>; + mal-tx-channel = <3>; + mal-rx-channel = <3>; + cell-index = <3>; + max-frame-size = <5dc>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rgmii"; + phy-map = <00000003>; + rgmii-device = <&RGMII0>; + rgmii-channel = <1>; + zmii-device = <&ZMII0>; + zmii-channel = <3>; + }; + + + GPT0: gpt@40000a00 { + /* FIXME */ + reg = <40000a00 d4>; + interrupt-parent = <&UIC0>; + interrupts = <12 4 13 4 14 4 15 4 16 4>; + }; + + }; + + PCIX0: pci@20ec00000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb440gp-pcix", "ibm,plb-pcix"; + primary; + large-inbound-windows; + enable-msi-hole; + reg = <2 0ec00000 8 /* Config space access */ + 0 0 0 /* no IACK cycles */ + 2 0ed00000 4 /* Special cycles */ + 2 0ec80000 100 /* Internal registers */ + 2 0ec80100 fc>; /* Internal messaging registers */ + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <02000000 0 80000000 00000003 80000000 0 80000000 + 01000000 0 00000000 00000002 08000000 0 00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <42000000 0 0 0 0 0 80000000>; + + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + /* IDSEL 1 */ + 0800 0 0 1 &UIC0 17 8 + 0800 0 0 2 &UIC0 18 8 + 0800 0 0 3 &UIC0 19 8 + 0800 0 0 4 &UIC0 1a 8 + + /* IDSEL 2 */ + 1000 0 0 1 &UIC0 18 8 + 1000 0 0 2 &UIC0 19 8 + 1000 0 0 3 &UIC0 1a 8 + 1000 0 0 4 &UIC0 17 8 + >; + }; + }; + + chosen { + linux,stdout-path = "/plb/opb/serial@40000300"; + }; +}; diff --git a/arch/powerpc/boot/dts/tqm5200.dts b/arch/powerpc/boot/dts/tqm5200.dts new file mode 100644 index 00000000000..c86464f007d --- /dev/null +++ b/arch/powerpc/boot/dts/tqm5200.dts @@ -0,0 +1,177 @@ +/* + * TQM5200 board Device Tree Source + * + * Copyright (C) 2007 Semihalf + * Marian Balakowicz <m8@semihalf.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/ { + model = "tqc,tqm5200"; + compatible = "tqc,tqm5200"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,5200@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; + i-cache-line-size = <20>; + d-cache-size = <4000>; // L1, 16K + i-cache-size = <4000>; // L1, 16K + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + }; + }; + + memory { + device_type = "memory"; + reg = <00000000 04000000>; // 64MB + }; + + soc5200@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc5200-immr"; + ranges = <0 f0000000 0000c000>; + reg = <f0000000 00000100>; + bus-frequency = <0>; // from bootloader + system-frequency = <0>; // from bootloader + + cdm@200 { + compatible = "fsl,mpc5200-cdm"; + reg = <200 38>; + }; + + mpc5200_pic: interrupt-controller@500 { + // 5200 interrupts are encoded into two levels; + interrupt-controller; + #interrupt-cells = <3>; + compatible = "fsl,mpc5200-pic"; + reg = <500 80>; + }; + + timer@600 { // General Purpose Timer + compatible = "fsl,mpc5200-gpt"; + reg = <600 10>; + interrupts = <1 9 0>; + interrupt-parent = <&mpc5200_pic>; + fsl,has-wdt; + }; + + gpio@b00 { + compatible = "fsl,mpc5200-gpio"; + reg = <b00 40>; + interrupts = <1 7 0>; + interrupt-parent = <&mpc5200_pic>; + }; + + usb@1000 { + compatible = "fsl,mpc5200-ohci","ohci-be"; + reg = <1000 ff>; + interrupts = <2 6 0>; + interrupt-parent = <&mpc5200_pic>; + }; + + dma-controller@1200 { + compatible = "fsl,mpc5200-bestcomm"; + reg = <1200 80>; + interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 + 3 4 0 3 5 0 3 6 0 3 7 0 + 3 8 0 3 9 0 3 a 0 3 b 0 + 3 c 0 3 d 0 3 e 0 3 f 0>; + interrupt-parent = <&mpc5200_pic>; + }; + + xlb@1f00 { + compatible = "fsl,mpc5200-xlb"; + reg = <1f00 100>; + }; + + serial@2000 { // PSC1 + device_type = "serial"; + compatible = "fsl,mpc5200-psc-uart"; + port-number = <0>; // Logical port assignment + reg = <2000 100>; + interrupts = <2 1 0>; + interrupt-parent = <&mpc5200_pic>; + }; + + serial@2200 { // PSC2 + device_type = "serial"; + compatible = "fsl,mpc5200-psc-uart"; + port-number = <1>; // Logical port assignment + reg = <2200 100>; + interrupts = <2 2 0>; + interrupt-parent = <&mpc5200_pic>; + }; + + serial@2400 { // PSC3 + device_type = "serial"; + compatible = "fsl,mpc5200-psc-uart"; + port-number = <2>; // Logical port assignment + reg = <2400 100>; + interrupts = <2 3 0>; + interrupt-parent = <&mpc5200_pic>; + }; + + ethernet@3000 { + device_type = "network"; + compatible = "fsl,mpc5200-fec"; + reg = <3000 800>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <2 5 0>; + interrupt-parent = <&mpc5200_pic>; + }; + + ata@3a00 { + compatible = "fsl,mpc5200-ata"; + reg = <3a00 100>; + interrupts = <2 7 0>; + interrupt-parent = <&mpc5200_pic>; + }; + + i2c@3d40 { + compatible = "fsl,mpc5200-i2c","fsl-i2c"; + reg = <3d40 40>; + interrupts = <2 10 0>; + interrupt-parent = <&mpc5200_pic>; + fsl5200-clocking; + }; + + sram@8000 { + compatible = "fsl,mpc5200-sram"; + reg = <8000 4000>; + }; + }; + + pci@f0000d00 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + compatible = "fsl,mpc5200-pci"; + reg = <f0000d00 100>; + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = <c000 0 0 1 &mpc5200_pic 0 0 3 + c000 0 0 2 &mpc5200_pic 0 0 3 + c000 0 0 3 &mpc5200_pic 0 0 3 + c000 0 0 4 &mpc5200_pic 0 0 3>; + clock-frequency = <0>; // From boot loader + interrupts = <2 8 0 2 9 0 2 a 0>; + interrupt-parent = <&mpc5200_pic>; + bus-range = <0 0>; + ranges = <42000000 0 80000000 80000000 0 10000000 + 02000000 0 90000000 90000000 0 10000000 + 01000000 0 00000000 a0000000 0 01000000>; + }; +}; diff --git a/arch/powerpc/boot/dts/tqm8540.dts b/arch/powerpc/boot/dts/tqm8540.dts new file mode 100644 index 00000000000..1addb3ae719 --- /dev/null +++ b/arch/powerpc/boot/dts/tqm8540.dts @@ -0,0 +1,204 @@ +/* + * TQM 8540 Device Tree Source + * + * Copyright 2008 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "tqm,8540"; + compatible = "tqm,8540", "tqm,85xx"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8540@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + soc@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0x0 0xe0000000 0x100000>; + reg = <0xe0000000 0x200>; + bus-frequency = <0>; + compatible = "fsl,mpc8540-immr", "simple-bus"; + + memory-controller@2000 { + compatible = "fsl,8540-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + l2-cache-controller@20000 { + compatible = "fsl,8540-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; + cache-size = <0x40000>; // L2, 256K + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + + rtc@68 { + compatible = "dallas,ds1337"; + reg = <0x68>; + }; + }; + + mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x24520 0x20>; + + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <1>; + device_type = "ethernet-phy"; + }; + phy2: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <2>; + device_type = "ethernet-phy"; + }; + phy3: ethernet-phy@3 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <3>; + device_type = "ethernet-phy"; + }; + }; + + enet0: ethernet@24000 { + cell-index = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy2>; + }; + + enet1: ethernet@25000 { + cell-index = <1>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 36 2 40 2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy1>; + }; + + enet2: ethernet@26000 { + cell-index = <2>; + device_type = "network"; + model = "FEC"; + compatible = "gianfar"; + reg = <0x26000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <41 2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy3>; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4500 0x100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4600 0x100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + device_type = "open-pic"; + }; + }; + + pci0: pci@e0008000 { + cell-index = <0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; + device_type = "pci"; + reg = <0xe0008000 0x1000>; + clock-frequency = <66666666>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 28 */ + 0xe000 0 0 1 &mpic 2 1 + 0xe000 0 0 2 &mpic 3 1>; + + interrupt-parent = <&mpic>; + interrupts = <24 2>; + bus-range = <0 0>; + ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000 + 0x01000000 0 0x00000000 0xe2000000 0 0x01000000>; + }; +}; diff --git a/arch/powerpc/boot/dts/tqm8541.dts b/arch/powerpc/boot/dts/tqm8541.dts new file mode 100644 index 00000000000..9e01093f496 --- /dev/null +++ b/arch/powerpc/boot/dts/tqm8541.dts @@ -0,0 +1,228 @@ +/* + * TQM 8541 Device Tree Source + * + * Copyright 2008 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "tqm,8541"; + compatible = "tqm,8541", "tqm,85xx"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8541@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + soc@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0x0 0xe0000000 0x100000>; + reg = <0xe0000000 0x200>; + bus-frequency = <0>; + compatible = "fsl,mpc8541-immr", "simple-bus"; + + memory-controller@2000 { + compatible = "fsl,8540-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + l2-cache-controller@20000 { + compatible = "fsl,8540-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; + cache-size = <0x40000>; // L2, 256K + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + + rtc@68 { + compatible = "dallas,ds1337"; + reg = <0x68>; + }; + }; + + mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x24520 0x20>; + + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <1>; + device_type = "ethernet-phy"; + }; + phy2: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <2>; + device_type = "ethernet-phy"; + }; + phy3: ethernet-phy@3 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <3>; + device_type = "ethernet-phy"; + }; + }; + + enet0: ethernet@24000 { + cell-index = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy2>; + }; + + enet1: ethernet@25000 { + cell-index = <1>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 36 2 40 2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy1>; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4500 0x100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4600 0x100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + device_type = "open-pic"; + }; + + cpm@919c0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8541-cpm", "fsl,cpm2", "simple-bus"; + reg = <0x919c0 0x30>; + ranges; + + muram@80000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x80000 0x10000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0 0x2000 0x9000 0x1000>; + }; + }; + + brg@919f0 { + compatible = "fsl,mpc8541-brg", + "fsl,cpm2-brg", + "fsl,cpm-brg"; + reg = <0x919f0 0x10 0x915f0 0x10>; + clock-frequency = <0>; + }; + + cpmpic: pic@90c00 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + interrupts = <46 2>; + interrupt-parent = <&mpic>; + reg = <0x90c00 0x80>; + compatible = "fsl,mpc8541-cpm-pic", "fsl,cpm2-pic"; + }; + }; + }; + + pci0: pci@e0008000 { + cell-index = <0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; + device_type = "pci"; + reg = <0xe0008000 0x1000>; + clock-frequency = <66666666>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 28 */ + 0xe000 0 0 1 &mpic 2 1 + 0xe000 0 0 2 &mpic 3 1>; + + interrupt-parent = <&mpic>; + interrupts = <24 2>; + bus-range = <0 0>; + ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000 + 0x01000000 0 0x00000000 0xe2000000 0 0x01000000>; + }; +}; diff --git a/arch/powerpc/boot/dts/tqm8555.dts b/arch/powerpc/boot/dts/tqm8555.dts new file mode 100644 index 00000000000..a20eb06c482 --- /dev/null +++ b/arch/powerpc/boot/dts/tqm8555.dts @@ -0,0 +1,228 @@ +/* + * TQM 8555 Device Tree Source + * + * Copyright 2008 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "tqm,8555"; + compatible = "tqm,8555", "tqm,85xx"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8555@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + soc@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0x0 0xe0000000 0x100000>; + reg = <0xe0000000 0x200>; + bus-frequency = <0>; + compatible = "fsl,mpc8555-immr", "simple-bus"; + + memory-controller@2000 { + compatible = "fsl,8540-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + l2-cache-controller@20000 { + compatible = "fsl,8540-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; + cache-size = <0x40000>; // L2, 256K + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + + rtc@68 { + compatible = "dallas,ds1337"; + reg = <0x68>; + }; + }; + + mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x24520 0x20>; + + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <1>; + device_type = "ethernet-phy"; + }; + phy2: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <2>; + device_type = "ethernet-phy"; + }; + phy3: ethernet-phy@3 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <3>; + device_type = "ethernet-phy"; + }; + }; + + enet0: ethernet@24000 { + cell-index = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy2>; + }; + + enet1: ethernet@25000 { + cell-index = <1>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 36 2 40 2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy1>; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4500 0x100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4600 0x100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + device_type = "open-pic"; + }; + + cpm@919c0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8555-cpm", "fsl,cpm2", "simple-bus"; + reg = <0x919c0 0x30>; + ranges; + + muram@80000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x80000 0x10000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0 0x2000 0x9000 0x1000>; + }; + }; + + brg@919f0 { + compatible = "fsl,mpc8555-brg", + "fsl,cpm2-brg", + "fsl,cpm-brg"; + reg = <0x919f0 0x10 0x915f0 0x10>; + clock-frequency = <0>; + }; + + cpmpic: pic@90c00 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + interrupts = <46 2>; + interrupt-parent = <&mpic>; + reg = <0x90c00 0x80>; + compatible = "fsl,mpc8555-cpm-pic", "fsl,cpm2-pic"; + }; + }; + }; + + pci0: pci@e0008000 { + cell-index = <0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; + device_type = "pci"; + reg = <0xe0008000 0x1000>; + clock-frequency = <66666666>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 28 */ + 0xe000 0 0 1 &mpic 2 1 + 0xe000 0 0 2 &mpic 3 1>; + + interrupt-parent = <&mpic>; + interrupts = <24 2>; + bus-range = <0 0>; + ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000 + 0x01000000 0 0x00000000 0xe2000000 0 0x01000000>; + }; +}; diff --git a/arch/powerpc/boot/dts/tqm8560.dts b/arch/powerpc/boot/dts/tqm8560.dts new file mode 100644 index 00000000000..b9ac6c943b8 --- /dev/null +++ b/arch/powerpc/boot/dts/tqm8560.dts @@ -0,0 +1,245 @@ +/* + * TQM 8560 Device Tree Source + * + * Copyright 2008 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "tqm,8560"; + compatible = "tqm,8560", "tqm,85xx"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8560@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + soc@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0x0 0xe0000000 0x100000>; + reg = <0xe0000000 0x200>; + bus-frequency = <0>; + compatible = "fsl,mpc8560-immr", "simple-bus"; + + memory-controller@2000 { + compatible = "fsl,8540-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + l2-cache-controller@20000 { + compatible = "fsl,8540-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; + cache-size = <0x40000>; // L2, 256K + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + + rtc@68 { + compatible = "dallas,ds1337"; + reg = <0x68>; + }; + }; + + mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x24520 0x20>; + + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <1>; + device_type = "ethernet-phy"; + }; + phy2: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <2>; + device_type = "ethernet-phy"; + }; + phy3: ethernet-phy@3 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <3>; + device_type = "ethernet-phy"; + }; + }; + + enet0: ethernet@24000 { + cell-index = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy2>; + }; + + enet1: ethernet@25000 { + cell-index = <1>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 36 2 40 2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy1>; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + device_type = "open-pic"; + }; + + cpm@919c0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8560-cpm", "fsl,cpm2", "simple-bus"; + reg = <0x919c0 0x30>; + ranges; + + muram@80000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x80000 0x10000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0 0x4000 0x9000 0x2000>; + }; + }; + + brg@919f0 { + compatible = "fsl,mpc8560-brg", + "fsl,cpm2-brg", + "fsl,cpm-brg"; + reg = <0x919f0 0x10 0x915f0 0x10>; + clock-frequency = <0>; + }; + + cpmpic: pic@90c00 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + interrupts = <46 2>; + interrupt-parent = <&mpic>; + reg = <0x90c00 0x80>; + compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic"; + }; + + serial0: serial@91a00 { + device_type = "serial"; + compatible = "fsl,mpc8560-scc-uart", + "fsl,cpm2-scc-uart"; + reg = <0x91a00 0x20 0x88000 0x100>; + fsl,cpm-brg = <1>; + fsl,cpm-command = <0x800000>; + current-speed = <115200>; + interrupts = <40 8>; + interrupt-parent = <&cpmpic>; + }; + + serial1: serial@91a20 { + device_type = "serial"; + compatible = "fsl,mpc8560-scc-uart", + "fsl,cpm2-scc-uart"; + reg = <0x91a20 0x20 0x88100 0x100>; + fsl,cpm-brg = <2>; + fsl,cpm-command = <0x4a00000>; + current-speed = <115200>; + interrupts = <41 8>; + interrupt-parent = <&cpmpic>; + }; + + enet2: ethernet@91340 { + device_type = "network"; + compatible = "fsl,mpc8560-fcc-enet", + "fsl,cpm2-fcc-enet"; + reg = <0x91340 0x20 0x88600 0x100 0x913d0 0x1>; + local-mac-address = [ 00 00 00 00 00 00 ]; + fsl,cpm-command = <0x1a400300>; + interrupts = <34 8>; + interrupt-parent = <&cpmpic>; + phy-handle = <&phy3>; + }; + }; + }; + + pci0: pci@e0008000 { + cell-index = <0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; + device_type = "pci"; + reg = <0xe0008000 0x1000>; + clock-frequency = <66666666>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 28 */ + 0xe000 0 0 1 &mpic 2 1 + 0xe000 0 0 2 &mpic 3 1>; + + interrupt-parent = <&mpic>; + interrupts = <24 2>; + bus-range = <0 0>; + ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000 + 0x01000000 0 0x00000000 0xe2000000 0 0x01000000>; + }; +}; diff --git a/arch/powerpc/boot/dts/walnut.dts b/arch/powerpc/boot/dts/walnut.dts index 754fa3960f8..dcc21b0438e 100644 --- a/arch/powerpc/boot/dts/walnut.dts +++ b/arch/powerpc/boot/dts/walnut.dts @@ -14,14 +14,21 @@ #size-cells = <1>; model = "ibm,walnut"; compatible = "ibm,walnut"; - dcr-parent = <&/cpus/PowerPC,405GP@0>; + dcr-parent = <&/cpus/cpu@0>; + + aliases { + ethernet0 = &EMAC; + serial0 = &UART0; + serial1 = &UART1; + }; cpus { #address-cells = <1>; #size-cells = <0>; - PowerPC,405GP@0 { + cpu@0 { device_type = "cpu"; + model = "PowerPC,405GP"; reg = <0>; clock-frequency = <bebc200>; /* Filled in by zImage */ timebase-frequency = <0>; /* Filled in by zImage */ @@ -168,9 +175,10 @@ }; }; - ds1743@1,0 { + nvram@1,0 { /* NVRAM and RTC */ - compatible = "ds1743"; + compatible = "ds1743-nvram"; + #bytes = <2000>; reg = <1 0 2000>; }; @@ -190,6 +198,45 @@ virtual-reg = <f0300005>; }; }; + + PCI0: pci@ec000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb405gp-pci", "ibm,plb-pci"; + primary; + reg = <eec00000 8 /* Config space access */ + eed80000 4 /* IACK */ + eed80000 4 /* Special cycle */ + ef480000 40>; /* Internal registers */ + + /* Outbound ranges, one memory and one IO, + * later cannot be changed. Chip supports a second + * IO range but we don't use it for now + */ + ranges = <02000000 0 80000000 80000000 0 20000000 + 01000000 0 00000000 e8000000 0 00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <42000000 0 0 0 0 80000000>; + + /* Walnut has all 4 IRQ pins tied together per slot */ + interrupt-map-mask = <f800 0 0 0>; + interrupt-map = < + /* IDSEL 1 */ + 0800 0 0 0 &UIC0 1c 8 + + /* IDSEL 2 */ + 1000 0 0 0 &UIC0 1d 8 + + /* IDSEL 3 */ + 1800 0 0 0 &UIC0 1e 8 + + /* IDSEL 4 */ + 2000 0 0 0 &UIC0 1f 8 + >; + }; }; chosen { diff --git a/arch/powerpc/boot/dts/warp.dts b/arch/powerpc/boot/dts/warp.dts new file mode 100644 index 00000000000..dc1499d30f4 --- /dev/null +++ b/arch/powerpc/boot/dts/warp.dts @@ -0,0 +1,239 @@ +/* + * Device Tree Source for PIKA Warp + * + * Copyright (c) 2008 PIKA Technologies + * Sean MacLennan <smaclennan@pikatech.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "pika,warp"; + compatible = "pika,warp"; + dcr-parent = <&/cpus/cpu@0>; + + aliases { + ethernet0 = &EMAC0; + serial0 = &UART0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,440EP"; + reg = <0>; + clock-frequency = <0>; /* Filled in by zImage */ + timebase-frequency = <0>; /* Filled in by zImage */ + i-cache-line-size = <20>; + d-cache-line-size = <20>; + i-cache-size = <8000>; + d-cache-size = <8000>; + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0 0>; /* Filled in by zImage */ + }; + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-440ep","ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0c0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-440ep","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0d0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <1e 4 1f 4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + SDR0: sdr { + compatible = "ibm,sdr-440ep"; + dcr-reg = <00e 002>; + }; + + CPR0: cpr { + compatible = "ibm,cpr-440ep"; + dcr-reg = <00c 002>; + }; + + plb { + compatible = "ibm,plb-440ep", "ibm,plb-440gp", "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by zImage */ + + SDRAM0: sdram { + compatible = "ibm,sdram-440ep", "ibm,sdram-405gp"; + dcr-reg = <010 2>; + }; + + DMA0: dma { + compatible = "ibm,dma-440ep", "ibm,dma-440gp"; + dcr-reg = <100 027>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal"; + dcr-reg = <180 62>; + num-tx-chans = <4>; + num-rx-chans = <2>; + interrupt-parent = <&MAL0>; + interrupts = <0 1 2 3 4>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*TXEOB*/ 0 &UIC0 a 4 + /*RXEOB*/ 1 &UIC0 b 4 + /*SERR*/ 2 &UIC1 0 4 + /*TXDE*/ 3 &UIC1 1 4 + /*RXDE*/ 4 &UIC1 2 4>; + }; + + POB0: opb { + compatible = "ibm,opb-440ep", "ibm,opb-440gp", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <00000000 0 00000000 80000000 + 80000000 0 80000000 80000000>; + interrupt-parent = <&UIC1>; + interrupts = <7 4>; + clock-frequency = <0>; /* Filled in by zImage */ + + EBC0: ebc { + compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc"; + dcr-reg = <012 2>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by zImage */ + interrupts = <5 1>; + interrupt-parent = <&UIC1>; + + fpga@2,0 { + compatible = "pika,fpga"; + reg = <2 0 2200>; + interrupts = <18 8>; + interrupt-parent = <&UIC0>; + }; + + nor_flash@0,0 { + compatible = "amd,s29gl512n", "cfi-flash"; + bank-width = <2>; + reg = <0 0 4000000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "kernel"; + reg = <0 180000>; + }; + partition@180000 { + label = "root"; + reg = <180000 3480000>; + }; + partition@3600000 { + label = "user"; + reg = <3600000 900000>; + }; + partition@3f00000 { + label = "fpga"; + reg = <3f00000 40000>; + }; + partition@3f40000 { + label = "env"; + reg = <3f40000 40000>; + }; + partition@3f80000 { + label = "u-boot"; + reg = <3f80000 80000>; + }; + }; + }; + + UART0: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600300 8>; + virtual-reg = <ef600300>; + clock-frequency = <0>; /* Filled in by zImage */ + current-speed = <1c200>; + interrupt-parent = <&UIC0>; + interrupts = <0 4>; + }; + + IIC0: i2c@ef600700 { + compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic"; + reg = <ef600700 14>; + interrupt-parent = <&UIC0>; + interrupts = <2 4>; + }; + + GPIO0: gpio@ef600b00 { + compatible = "ibm,gpio-440ep"; + reg = <ef600b00 48>; + }; + + GPIO1: gpio@ef600c00 { + compatible = "ibm,gpio-440ep"; + reg = <ef600c00 48>; + }; + + ZMII0: emac-zmii@ef600d00 { + compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii"; + reg = <ef600d00 c>; + }; + + EMAC0: ethernet@ef600e00 { + linux,network-index = <0>; + device_type = "network"; + compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac"; + interrupt-parent = <&UIC1>; + interrupts = <1c 4 1d 4>; + reg = <ef600e00 70>; + local-mac-address = [000000000000]; + mal-device = <&MAL0>; + mal-tx-channel = <0 1>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <5dc>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rmii"; + phy-map = <00000000>; + zmii-device = <&ZMII0>; + zmii-channel = <0>; + }; + + usb@ef601000 { + compatible = "ohci-be"; + reg = <ef601000 80>; + interrupts = <8 1 9 1>; + interrupt-parent = < &UIC1 >; + }; + }; + }; + + chosen { + linux,stdout-path = "/plb/opb/serial@ef600300"; + }; +}; diff --git a/arch/powerpc/boot/ebony.c b/arch/powerpc/boot/ebony.c index 86c0f5df0a8..f61364c47a7 100644 --- a/arch/powerpc/boot/ebony.c +++ b/arch/powerpc/boot/ebony.c @@ -31,66 +31,6 @@ static u8 *ebony_mac0, *ebony_mac1; -/* Calculate 440GP clocks */ -void ibm440gp_fixup_clocks(unsigned int sysclk, unsigned int ser_clk) -{ - u32 sys0 = mfdcr(DCRN_CPC0_SYS0); - u32 cr0 = mfdcr(DCRN_CPC0_CR0); - u32 cpu, plb, opb, ebc, tb, uart0, uart1, m; - u32 opdv = CPC0_SYS0_OPDV(sys0); - u32 epdv = CPC0_SYS0_EPDV(sys0); - - if (sys0 & CPC0_SYS0_BYPASS) { - /* Bypass system PLL */ - cpu = plb = sysclk; - } else { - if (sys0 & CPC0_SYS0_EXTSL) - /* PerClk */ - m = CPC0_SYS0_FWDVB(sys0) * opdv * epdv; - else - /* CPU clock */ - m = CPC0_SYS0_FBDV(sys0) * CPC0_SYS0_FWDVA(sys0); - cpu = sysclk * m / CPC0_SYS0_FWDVA(sys0); - plb = sysclk * m / CPC0_SYS0_FWDVB(sys0); - } - - opb = plb / opdv; - ebc = opb / epdv; - - /* FIXME: Check if this is for all 440GP, or just Ebony */ - if ((mfpvr() & 0xf0000fff) == 0x40000440) - /* Rev. B 440GP, use external system clock */ - tb = sysclk; - else - /* Rev. C 440GP, errata force us to use internal clock */ - tb = cpu; - - if (cr0 & CPC0_CR0_U0EC) - /* External UART clock */ - uart0 = ser_clk; - else - /* Internal UART clock */ - uart0 = plb / CPC0_CR0_UDIV(cr0); - - if (cr0 & CPC0_CR0_U1EC) - /* External UART clock */ - uart1 = ser_clk; - else - /* Internal UART clock */ - uart1 = plb / CPC0_CR0_UDIV(cr0); - - printf("PPC440GP: SysClk = %dMHz (%x)\n\r", - (sysclk + 500000) / 1000000, sysclk); - - dt_fixup_cpu_clocks(cpu, tb, 0); - - dt_fixup_clock("/plb", plb); - dt_fixup_clock("/plb/opb", opb); - dt_fixup_clock("/plb/opb/ebc", ebc); - dt_fixup_clock("/plb/opb/serial@40000200", uart0); - dt_fixup_clock("/plb/opb/serial@40000300", uart1); -} - #define EBONY_FPGA_PATH "/plb/opb/ebc/fpga" #define EBONY_FPGA_FLASH_SEL 0x01 #define EBONY_SMALL_FLASH_PATH "/plb/opb/ebc/small-flash" @@ -134,7 +74,7 @@ static void ebony_fixups(void) unsigned long sysclk = 33000000; ibm440gp_fixup_clocks(sysclk, 6 * 1843200); - ibm4xx_fixup_memsize(); + ibm4xx_sdram_fixup_memsize(); dt_fixup_mac_addresses(ebony_mac0, ebony_mac1); ibm4xx_fixup_ebc_ranges("/plb/opb/ebc"); ebony_flashsel_fixup(); @@ -146,6 +86,6 @@ void ebony_init(void *mac0, void *mac1) platform_ops.exit = ibm44x_dbcr_reset; ebony_mac0 = mac0; ebony_mac1 = mac1; - ft_init(_dtb_start, _dtb_end - _dtb_start, 32); + fdt_init(_dtb_start); serial_console_init(); } diff --git a/arch/powerpc/boot/ep405.c b/arch/powerpc/boot/ep405.c new file mode 100644 index 00000000000..2d08a862cbe --- /dev/null +++ b/arch/powerpc/boot/ep405.c @@ -0,0 +1,74 @@ +/* + * Embedded Planet EP405 with PlanetCore firmware + * + * (c) Benjamin Herrenschmidt <benh@kernel.crashing.org>, IBM Corp,\ + * + * Based on ep88xc.c by + * + * Scott Wood <scottwood@freescale.com> + * + * Copyright (c) 2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include "ops.h" +#include "stdio.h" +#include "planetcore.h" +#include "dcr.h" +#include "4xx.h" +#include "io.h" + +static char *table; +static u64 mem_size; + +static void platform_fixups(void) +{ + u64 val; + void *nvrtc; + + dt_fixup_memory(0, mem_size); + planetcore_set_mac_addrs(table); + + if (!planetcore_get_decimal(table, PLANETCORE_KEY_CRYSTAL_HZ, &val)) { + printf("No PlanetCore crystal frequency key.\r\n"); + return; + } + ibm405gp_fixup_clocks(val, 0xa8c000); + ibm4xx_quiesce_eth((u32 *)0xef600800, NULL); + ibm4xx_fixup_ebc_ranges("/plb/ebc"); + + if (!planetcore_get_decimal(table, PLANETCORE_KEY_KB_NVRAM, &val)) { + printf("No PlanetCore NVRAM size key.\r\n"); + return; + } + nvrtc = finddevice("/plb/ebc/nvrtc@4,200000"); + if (nvrtc != NULL) { + u32 reg[3] = { 4, 0x200000, 0}; + getprop(nvrtc, "reg", reg, 3); + reg[2] = (val << 10) & 0xffffffff; + setprop(nvrtc, "reg", reg, 3); + } +} + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + table = (char *)r3; + planetcore_prepare_table(table); + + if (!planetcore_get_decimal(table, PLANETCORE_KEY_MB_RAM, &mem_size)) + return; + + mem_size *= 1024 * 1024; + simple_alloc_init(_end, mem_size - (unsigned long)_end, 32, 64); + + fdt_init(_dtb_start); + + planetcore_set_stdout_path(table); + + serial_console_init(); + platform_ops.fixups = platform_fixups; +} diff --git a/arch/powerpc/boot/ep8248e.c b/arch/powerpc/boot/ep8248e.c new file mode 100644 index 00000000000..f57d14d0272 --- /dev/null +++ b/arch/powerpc/boot/ep8248e.c @@ -0,0 +1,55 @@ +/* + * Embedded Planet EP8248E with PlanetCore firmware + * + * Author: Scott Wood <scottwood@freescale.com> + * + * Copyright (c) 2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include "ops.h" +#include "stdio.h" +#include "planetcore.h" +#include "pq2.h" + +static char *table; +static u64 mem_size; + +#include <io.h> + +static void platform_fixups(void) +{ + u64 val; + + dt_fixup_memory(0, mem_size); + planetcore_set_mac_addrs(table); + + if (!planetcore_get_decimal(table, PLANETCORE_KEY_CRYSTAL_HZ, &val)) { + printf("No PlanetCore crystal frequency key.\r\n"); + return; + } + + pq2_fixup_clocks(val); +} + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + table = (char *)r3; + planetcore_prepare_table(table); + + if (!planetcore_get_decimal(table, PLANETCORE_KEY_MB_RAM, &mem_size)) + return; + + mem_size *= 1024 * 1024; + simple_alloc_init(_end, mem_size - (unsigned long)_end, 32, 64); + + fdt_init(_dtb_start); + + planetcore_set_stdout_path(table); + serial_console_init(); + platform_ops.fixups = platform_fixups; +} diff --git a/arch/powerpc/boot/ep88xc.c b/arch/powerpc/boot/ep88xc.c index 6b87cdce3fe..a400f540715 100644 --- a/arch/powerpc/boot/ep88xc.c +++ b/arch/powerpc/boot/ep88xc.c @@ -45,7 +45,7 @@ void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, mem_size *= 1024 * 1024; simple_alloc_init(_end, mem_size - (unsigned long)_end, 32, 64); - ft_init(_dtb_start, _dtb_end - _dtb_start, 32); + fdt_init(_dtb_start); planetcore_set_stdout_path(table); diff --git a/arch/powerpc/boot/flatdevtree.c b/arch/powerpc/boot/flatdevtree.c deleted file mode 100644 index cf30675c611..00000000000 --- a/arch/powerpc/boot/flatdevtree.c +++ /dev/null @@ -1,1036 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - * - * Copyright Pantelis Antoniou 2006 - * Copyright (C) IBM Corporation 2006 - * - * Authors: Pantelis Antoniou <pantelis@embeddedalley.com> - * Hollis Blanchard <hollisb@us.ibm.com> - * Mark A. Greer <mgreer@mvista.com> - * Paul Mackerras <paulus@samba.org> - */ - -#include <string.h> -#include <stddef.h> -#include "flatdevtree.h" -#include "flatdevtree_env.h" - -#define _ALIGN(x, al) (((x) + (al) - 1) & ~((al) - 1)) - -static char *ft_root_node(struct ft_cxt *cxt) -{ - return cxt->rgn[FT_STRUCT].start; -} - -/* Routines for keeping node ptrs returned by ft_find_device current */ -/* First entry not used b/c it would return 0 and be taken as NULL/error */ -static void *ft_get_phandle(struct ft_cxt *cxt, char *node) -{ - unsigned int i; - - if (!node) - return NULL; - - for (i = 1; i < cxt->nodes_used; i++) /* already there? */ - if (cxt->node_tbl[i] == node) - return (void *)i; - - if (cxt->nodes_used < cxt->node_max) { - cxt->node_tbl[cxt->nodes_used] = node; - return (void *)cxt->nodes_used++; - } - - return NULL; -} - -static char *ft_node_ph2node(struct ft_cxt *cxt, const void *phandle) -{ - unsigned int i = (unsigned int)phandle; - - if (i < cxt->nodes_used) - return cxt->node_tbl[i]; - return NULL; -} - -static void ft_node_update_before(struct ft_cxt *cxt, char *addr, int shift) -{ - unsigned int i; - - if (shift == 0) - return; - - for (i = 1; i < cxt->nodes_used; i++) - if (cxt->node_tbl[i] < addr) - cxt->node_tbl[i] += shift; -} - -static void ft_node_update_after(struct ft_cxt *cxt, char *addr, int shift) -{ - unsigned int i; - - if (shift == 0) - return; - - for (i = 1; i < cxt->nodes_used; i++) - if (cxt->node_tbl[i] >= addr) - cxt->node_tbl[i] += shift; -} - -/* Struct used to return info from ft_next() */ -struct ft_atom { - u32 tag; - const char *name; - void *data; - u32 size; -}; - -/* Set ptrs to current one's info; return addr of next one */ -static char *ft_next(struct ft_cxt *cxt, char *p, struct ft_atom *ret) -{ - u32 sz; - - if (p >= cxt->rgn[FT_STRUCT].start + cxt->rgn[FT_STRUCT].size) - return NULL; - - ret->tag = be32_to_cpu(*(u32 *) p); - p += 4; - - switch (ret->tag) { /* Tag */ - case OF_DT_BEGIN_NODE: - ret->name = p; - ret->data = (void *)(p - 4); /* start of node */ - p += _ALIGN(strlen(p) + 1, 4); - break; - case OF_DT_PROP: - ret->size = sz = be32_to_cpu(*(u32 *) p); - ret->name = cxt->str_anchor + be32_to_cpu(*(u32 *) (p + 4)); - ret->data = (void *)(p + 8); - p += 8 + _ALIGN(sz, 4); - break; - case OF_DT_END_NODE: - case OF_DT_NOP: - break; - case OF_DT_END: - default: - p = NULL; - break; - } - - return p; -} - -#define HDR_SIZE _ALIGN(sizeof(struct boot_param_header), 8) -#define EXPAND_INCR 1024 /* alloc this much extra when expanding */ - -/* Copy the tree to a newly-allocated region and put things in order */ -static int ft_reorder(struct ft_cxt *cxt, int nextra) -{ - unsigned long tot; - enum ft_rgn_id r; - char *p, *pend; - int stroff; - - tot = HDR_SIZE + EXPAND_INCR; - for (r = FT_RSVMAP; r <= FT_STRINGS; ++r) - tot += cxt->rgn[r].size; - if (nextra > 0) - tot += nextra; - tot = _ALIGN(tot, 8); - - if (!cxt->realloc) - return 0; - p = cxt->realloc(NULL, tot); - if (!p) - return 0; - - memcpy(p, cxt->bph, sizeof(struct boot_param_header)); - /* offsets get fixed up later */ - - cxt->bph = (struct boot_param_header *)p; - cxt->max_size = tot; - pend = p + tot; - p += HDR_SIZE; - - memcpy(p, cxt->rgn[FT_RSVMAP].start, cxt->rgn[FT_RSVMAP].size); - cxt->rgn[FT_RSVMAP].start = p; - p += cxt->rgn[FT_RSVMAP].size; - - memcpy(p, cxt->rgn[FT_STRUCT].start, cxt->rgn[FT_STRUCT].size); - ft_node_update_after(cxt, cxt->rgn[FT_STRUCT].start, - p - cxt->rgn[FT_STRUCT].start); - cxt->p += p - cxt->rgn[FT_STRUCT].start; - cxt->rgn[FT_STRUCT].start = p; - - p = pend - cxt->rgn[FT_STRINGS].size; - memcpy(p, cxt->rgn[FT_STRINGS].start, cxt->rgn[FT_STRINGS].size); - stroff = cxt->str_anchor - cxt->rgn[FT_STRINGS].start; - cxt->rgn[FT_STRINGS].start = p; - cxt->str_anchor = p + stroff; - - cxt->isordered = 1; - return 1; -} - -static inline char *prev_end(struct ft_cxt *cxt, enum ft_rgn_id r) -{ - if (r > FT_RSVMAP) - return cxt->rgn[r - 1].start + cxt->rgn[r - 1].size; - return (char *)cxt->bph + HDR_SIZE; -} - -static inline char *next_start(struct ft_cxt *cxt, enum ft_rgn_id r) -{ - if (r < FT_STRINGS) - return cxt->rgn[r + 1].start; - return (char *)cxt->bph + cxt->max_size; -} - -/* - * See if we can expand region rgn by nextra bytes by using up - * free space after or before the region. - */ -static int ft_shuffle(struct ft_cxt *cxt, char **pp, enum ft_rgn_id rgn, - int nextra) -{ - char *p = *pp; - char *rgn_start, *rgn_end; - - rgn_start = cxt->rgn[rgn].start; - rgn_end = rgn_start + cxt->rgn[rgn].size; - if (nextra <= 0 || rgn_end + nextra <= next_start(cxt, rgn)) { - /* move following stuff */ - if (p < rgn_end) { - if (nextra < 0) - memmove(p, p - nextra, rgn_end - p + nextra); - else - memmove(p + nextra, p, rgn_end - p); - if (rgn == FT_STRUCT) - ft_node_update_after(cxt, p, nextra); - } - cxt->rgn[rgn].size += nextra; - if (rgn == FT_STRINGS) - /* assumes strings only added at beginning */ - cxt->str_anchor += nextra; - return 1; - } - if (prev_end(cxt, rgn) <= rgn_start - nextra) { - /* move preceding stuff */ - if (p > rgn_start) { - memmove(rgn_start - nextra, rgn_start, p - rgn_start); - if (rgn == FT_STRUCT) - ft_node_update_before(cxt, p, -nextra); - } - *pp -= nextra; - cxt->rgn[rgn].start -= nextra; - cxt->rgn[rgn].size += nextra; - return 1; - } - return 0; -} - -static int ft_make_space(struct ft_cxt *cxt, char **pp, enum ft_rgn_id rgn, - int nextra) -{ - unsigned long size, ssize, tot; - char *str, *next; - enum ft_rgn_id r; - - if (!cxt->isordered) { - unsigned long rgn_off = *pp - cxt->rgn[rgn].start; - - if (!ft_reorder(cxt, nextra)) - return 0; - - *pp = cxt->rgn[rgn].start + rgn_off; - } - if (ft_shuffle(cxt, pp, rgn, nextra)) - return 1; - - /* See if there is space after the strings section */ - ssize = cxt->rgn[FT_STRINGS].size; - if (cxt->rgn[FT_STRINGS].start + ssize - < (char *)cxt->bph + cxt->max_size) { - /* move strings up as far as possible */ - str = (char *)cxt->bph + cxt->max_size - ssize; - cxt->str_anchor += str - cxt->rgn[FT_STRINGS].start; - memmove(str, cxt->rgn[FT_STRINGS].start, ssize); - cxt->rgn[FT_STRINGS].start = str; - /* enough space now? */ - if (rgn >= FT_STRUCT && ft_shuffle(cxt, pp, rgn, nextra)) - return 1; - } - - /* how much total free space is there following this region? */ - tot = 0; - for (r = rgn; r < FT_STRINGS; ++r) { - char *r_end = cxt->rgn[r].start + cxt->rgn[r].size; - tot += next_start(cxt, rgn) - r_end; - } - - /* cast is to shut gcc up; we know nextra >= 0 */ - if (tot < (unsigned int)nextra) { - /* have to reallocate */ - char *newp, *new_start; - int shift; - - if (!cxt->realloc) - return 0; - size = _ALIGN(cxt->max_size + (nextra - tot) + EXPAND_INCR, 8); - newp = cxt->realloc(cxt->bph, size); - if (!newp) - return 0; - cxt->max_size = size; - shift = newp - (char *)cxt->bph; - - if (shift) { /* realloc can return same addr */ - cxt->bph = (struct boot_param_header *)newp; - ft_node_update_after(cxt, cxt->rgn[FT_STRUCT].start, - shift); - for (r = FT_RSVMAP; r <= FT_STRINGS; ++r) { - new_start = cxt->rgn[r].start + shift; - cxt->rgn[r].start = new_start; - } - *pp += shift; - cxt->str_anchor += shift; - } - - /* move strings up to the end */ - str = newp + size - ssize; - cxt->str_anchor += str - cxt->rgn[FT_STRINGS].start; - memmove(str, cxt->rgn[FT_STRINGS].start, ssize); - cxt->rgn[FT_STRINGS].start = str; - - if (ft_shuffle(cxt, pp, rgn, nextra)) - return 1; - } - - /* must be FT_RSVMAP and we need to move FT_STRUCT up */ - if (rgn == FT_RSVMAP) { - next = cxt->rgn[FT_RSVMAP].start + cxt->rgn[FT_RSVMAP].size - + nextra; - ssize = cxt->rgn[FT_STRUCT].size; - if (next + ssize >= cxt->rgn[FT_STRINGS].start) - return 0; /* "can't happen" */ - memmove(next, cxt->rgn[FT_STRUCT].start, ssize); - ft_node_update_after(cxt, cxt->rgn[FT_STRUCT].start, nextra); - cxt->rgn[FT_STRUCT].start = next; - - if (ft_shuffle(cxt, pp, rgn, nextra)) - return 1; - } - - return 0; /* "can't happen" */ -} - -static void ft_put_word(struct ft_cxt *cxt, u32 v) -{ - *(u32 *) cxt->p = cpu_to_be32(v); - cxt->p += 4; -} - -static void ft_put_bin(struct ft_cxt *cxt, const void *data, unsigned int sz) -{ - unsigned long sza = _ALIGN(sz, 4); - - /* zero out the alignment gap if necessary */ - if (sz < sza) - *(u32 *) (cxt->p + sza - 4) = 0; - - /* copy in the data */ - memcpy(cxt->p, data, sz); - - cxt->p += sza; -} - -char *ft_begin_node(struct ft_cxt *cxt, const char *name) -{ - unsigned long nlen = strlen(name) + 1; - unsigned long len = 8 + _ALIGN(nlen, 4); - char *ret; - - if (!ft_make_space(cxt, &cxt->p, FT_STRUCT, len)) - return NULL; - - ret = cxt->p; - - ft_put_word(cxt, OF_DT_BEGIN_NODE); - ft_put_bin(cxt, name, strlen(name) + 1); - - return ret; -} - -void ft_end_node(struct ft_cxt *cxt) -{ - ft_put_word(cxt, OF_DT_END_NODE); -} - -void ft_nop(struct ft_cxt *cxt) -{ - if (ft_make_space(cxt, &cxt->p, FT_STRUCT, 4)) - ft_put_word(cxt, OF_DT_NOP); -} - -#define NO_STRING 0x7fffffff - -static int lookup_string(struct ft_cxt *cxt, const char *name) -{ - char *p, *end; - - p = cxt->rgn[FT_STRINGS].start; - end = p + cxt->rgn[FT_STRINGS].size; - while (p < end) { - if (strcmp(p, (char *)name) == 0) - return p - cxt->str_anchor; - p += strlen(p) + 1; - } - - return NO_STRING; -} - -/* lookup string and insert if not found */ -static int map_string(struct ft_cxt *cxt, const char *name) -{ - int off; - char *p; - - off = lookup_string(cxt, name); - if (off != NO_STRING) - return off; - p = cxt->rgn[FT_STRINGS].start; - if (!ft_make_space(cxt, &p, FT_STRINGS, strlen(name) + 1)) - return NO_STRING; - strcpy(p, name); - return p - cxt->str_anchor; -} - -int ft_prop(struct ft_cxt *cxt, const char *name, const void *data, - unsigned int sz) -{ - int off, len; - - off = map_string(cxt, name); - if (off == NO_STRING) - return -1; - - len = 12 + _ALIGN(sz, 4); - if (!ft_make_space(cxt, &cxt->p, FT_STRUCT, len)) - return -1; - - ft_put_word(cxt, OF_DT_PROP); - ft_put_word(cxt, sz); - ft_put_word(cxt, off); - ft_put_bin(cxt, data, sz); - return 0; -} - -int ft_prop_str(struct ft_cxt *cxt, const char *name, const char *str) -{ - return ft_prop(cxt, name, str, strlen(str) + 1); -} - -int ft_prop_int(struct ft_cxt *cxt, const char *name, unsigned int val) -{ - u32 v = cpu_to_be32((u32) val); - - return ft_prop(cxt, name, &v, 4); -} - -/* Calculate the size of the reserved map */ -static unsigned long rsvmap_size(struct ft_cxt *cxt) -{ - struct ft_reserve *res; - - res = (struct ft_reserve *)cxt->rgn[FT_RSVMAP].start; - while (res->start || res->len) - ++res; - return (char *)(res + 1) - cxt->rgn[FT_RSVMAP].start; -} - -/* Calculate the size of the struct region by stepping through it */ -static unsigned long struct_size(struct ft_cxt *cxt) -{ - char *p = cxt->rgn[FT_STRUCT].start; - char *next; - struct ft_atom atom; - - /* make check in ft_next happy */ - if (cxt->rgn[FT_STRUCT].size == 0) - cxt->rgn[FT_STRUCT].size = 0xfffffffful - (unsigned long)p; - - while ((next = ft_next(cxt, p, &atom)) != NULL) - p = next; - return p + 4 - cxt->rgn[FT_STRUCT].start; -} - -/* add `adj' on to all string offset values in the struct area */ -static void adjust_string_offsets(struct ft_cxt *cxt, int adj) -{ - char *p = cxt->rgn[FT_STRUCT].start; - char *next; - struct ft_atom atom; - int off; - - while ((next = ft_next(cxt, p, &atom)) != NULL) { - if (atom.tag == OF_DT_PROP) { - off = be32_to_cpu(*(u32 *) (p + 8)); - *(u32 *) (p + 8) = cpu_to_be32(off + adj); - } - p = next; - } -} - -/* start construction of the flat OF tree from scratch */ -void ft_begin(struct ft_cxt *cxt, void *blob, unsigned int max_size, - void *(*realloc_fn) (void *, unsigned long)) -{ - struct boot_param_header *bph = blob; - char *p; - struct ft_reserve *pres; - - /* clear the cxt */ - memset(cxt, 0, sizeof(*cxt)); - - cxt->bph = bph; - cxt->max_size = max_size; - cxt->realloc = realloc_fn; - cxt->isordered = 1; - - /* zero everything in the header area */ - memset(bph, 0, sizeof(*bph)); - - bph->magic = cpu_to_be32(OF_DT_HEADER); - bph->version = cpu_to_be32(0x10); - bph->last_comp_version = cpu_to_be32(0x10); - - /* start pointers */ - cxt->rgn[FT_RSVMAP].start = p = blob + HDR_SIZE; - cxt->rgn[FT_RSVMAP].size = sizeof(struct ft_reserve); - pres = (struct ft_reserve *)p; - cxt->rgn[FT_STRUCT].start = p += sizeof(struct ft_reserve); - cxt->rgn[FT_STRUCT].size = 4; - cxt->rgn[FT_STRINGS].start = blob + max_size; - cxt->rgn[FT_STRINGS].size = 0; - - /* init rsvmap and struct */ - pres->start = 0; - pres->len = 0; - *(u32 *) p = cpu_to_be32(OF_DT_END); - - cxt->str_anchor = blob; -} - -/* open up an existing blob to be examined or modified */ -int ft_open(struct ft_cxt *cxt, void *blob, unsigned int max_size, - unsigned int max_find_device, - void *(*realloc_fn) (void *, unsigned long)) -{ - struct boot_param_header *bph = blob; - - /* can't cope with version < 16 */ - if (be32_to_cpu(bph->version) < 16) - return -1; - - /* clear the cxt */ - memset(cxt, 0, sizeof(*cxt)); - - /* alloc node_tbl to track node ptrs returned by ft_find_device */ - ++max_find_device; - cxt->node_tbl = realloc_fn(NULL, max_find_device * sizeof(char *)); - if (!cxt->node_tbl) - return -1; - memset(cxt->node_tbl, 0, max_find_device * sizeof(char *)); - cxt->node_max = max_find_device; - cxt->nodes_used = 1; /* don't use idx 0 b/c looks like NULL */ - - cxt->bph = bph; - cxt->max_size = max_size; - cxt->realloc = realloc_fn; - - cxt->rgn[FT_RSVMAP].start = blob + be32_to_cpu(bph->off_mem_rsvmap); - cxt->rgn[FT_RSVMAP].size = rsvmap_size(cxt); - cxt->rgn[FT_STRUCT].start = blob + be32_to_cpu(bph->off_dt_struct); - cxt->rgn[FT_STRUCT].size = struct_size(cxt); - cxt->rgn[FT_STRINGS].start = blob + be32_to_cpu(bph->off_dt_strings); - cxt->rgn[FT_STRINGS].size = be32_to_cpu(bph->dt_strings_size); - - cxt->p = cxt->rgn[FT_STRUCT].start; - cxt->str_anchor = cxt->rgn[FT_STRINGS].start; - - return 0; -} - -/* add a reserver physical area to the rsvmap */ -int ft_add_rsvmap(struct ft_cxt *cxt, u64 physaddr, u64 size) -{ - char *p; - struct ft_reserve *pres; - - p = cxt->rgn[FT_RSVMAP].start + cxt->rgn[FT_RSVMAP].size - - sizeof(struct ft_reserve); - if (!ft_make_space(cxt, &p, FT_RSVMAP, sizeof(struct ft_reserve))) - return -1; - - pres = (struct ft_reserve *)p; - pres->start = cpu_to_be64(physaddr); - pres->len = cpu_to_be64(size); - - return 0; -} - -void ft_begin_tree(struct ft_cxt *cxt) -{ - cxt->p = ft_root_node(cxt); -} - -void ft_end_tree(struct ft_cxt *cxt) -{ - struct boot_param_header *bph = cxt->bph; - char *p, *oldstr, *str, *endp; - unsigned long ssize; - int adj; - - if (!cxt->isordered) - return; /* we haven't touched anything */ - - /* adjust string offsets */ - oldstr = cxt->rgn[FT_STRINGS].start; - adj = cxt->str_anchor - oldstr; - if (adj) - adjust_string_offsets(cxt, adj); - - /* make strings end on 8-byte boundary */ - ssize = cxt->rgn[FT_STRINGS].size; - endp = (char *)_ALIGN((unsigned long)cxt->rgn[FT_STRUCT].start - + cxt->rgn[FT_STRUCT].size + ssize, 8); - str = endp - ssize; - - /* move strings down to end of structs */ - memmove(str, oldstr, ssize); - cxt->str_anchor = str; - cxt->rgn[FT_STRINGS].start = str; - - /* fill in header fields */ - p = (char *)bph; - bph->totalsize = cpu_to_be32(endp - p); - bph->off_mem_rsvmap = cpu_to_be32(cxt->rgn[FT_RSVMAP].start - p); - bph->off_dt_struct = cpu_to_be32(cxt->rgn[FT_STRUCT].start - p); - bph->off_dt_strings = cpu_to_be32(cxt->rgn[FT_STRINGS].start - p); - bph->dt_strings_size = cpu_to_be32(ssize); -} - -void *ft_find_device(struct ft_cxt *cxt, const void *top, const char *srch_path) -{ - char *node; - - if (top) { - node = ft_node_ph2node(cxt, top); - if (node == NULL) - return NULL; - } else { - node = ft_root_node(cxt); - } - - node = ft_find_descendent(cxt, node, srch_path); - return ft_get_phandle(cxt, node); -} - -void *ft_find_descendent(struct ft_cxt *cxt, void *top, const char *srch_path) -{ - struct ft_atom atom; - char *p; - const char *cp, *q; - int cl; - int depth = -1; - int dmatch = 0; - const char *path_comp[FT_MAX_DEPTH]; - - cp = srch_path; - cl = 0; - p = top; - - while ((p = ft_next(cxt, p, &atom)) != NULL) { - switch (atom.tag) { - case OF_DT_BEGIN_NODE: - ++depth; - if (depth != dmatch) - break; - cxt->genealogy[depth] = atom.data; - cxt->genealogy[depth + 1] = NULL; - if (depth && !(strncmp(atom.name, cp, cl) == 0 - && (atom.name[cl] == '/' - || atom.name[cl] == '\0' - || atom.name[cl] == '@'))) - break; - path_comp[dmatch] = cp; - /* it matches so far, advance to next path component */ - cp += cl; - /* skip slashes */ - while (*cp == '/') - ++cp; - /* we're done if this is the end of the string */ - if (*cp == 0) - return atom.data; - /* look for end of this component */ - q = strchr(cp, '/'); - if (q) - cl = q - cp; - else - cl = strlen(cp); - ++dmatch; - break; - case OF_DT_END_NODE: - if (depth == 0) - return NULL; - if (dmatch > depth) { - --dmatch; - cl = cp - path_comp[dmatch] - 1; - cp = path_comp[dmatch]; - while (cl > 0 && cp[cl - 1] == '/') - --cl; - } - --depth; - break; - } - } - return NULL; -} - -void *__ft_get_parent(struct ft_cxt *cxt, void *node) -{ - int d; - struct ft_atom atom; - char *p; - - for (d = 0; cxt->genealogy[d] != NULL; ++d) - if (cxt->genealogy[d] == node) - return d > 0 ? cxt->genealogy[d - 1] : NULL; - - /* have to do it the hard way... */ - p = ft_root_node(cxt); - d = 0; - while ((p = ft_next(cxt, p, &atom)) != NULL) { - switch (atom.tag) { - case OF_DT_BEGIN_NODE: - cxt->genealogy[d] = atom.data; - if (node == atom.data) { - /* found it */ - cxt->genealogy[d + 1] = NULL; - return d > 0 ? cxt->genealogy[d - 1] : NULL; - } - ++d; - break; - case OF_DT_END_NODE: - --d; - break; - } - } - return NULL; -} - -void *ft_get_parent(struct ft_cxt *cxt, const void *phandle) -{ - void *node = ft_node_ph2node(cxt, phandle); - if (node == NULL) - return NULL; - - node = __ft_get_parent(cxt, node); - return ft_get_phandle(cxt, node); -} - -static const void *__ft_get_prop(struct ft_cxt *cxt, void *node, - const char *propname, unsigned int *len) -{ - struct ft_atom atom; - int depth = 0; - - while ((node = ft_next(cxt, node, &atom)) != NULL) { - switch (atom.tag) { - case OF_DT_BEGIN_NODE: - ++depth; - break; - - case OF_DT_PROP: - if (depth != 1 || strcmp(atom.name, propname)) - break; - - if (len) - *len = atom.size; - - return atom.data; - - case OF_DT_END_NODE: - if (--depth <= 0) - return NULL; - } - } - - return NULL; -} - -int ft_get_prop(struct ft_cxt *cxt, const void *phandle, const char *propname, - void *buf, const unsigned int buflen) -{ - const void *data; - unsigned int size; - - void *node = ft_node_ph2node(cxt, phandle); - if (!node) - return -1; - - data = __ft_get_prop(cxt, node, propname, &size); - if (data) { - unsigned int clipped_size = min(size, buflen); - memcpy(buf, data, clipped_size); - return size; - } - - return -1; -} - -void *__ft_find_node_by_prop_value(struct ft_cxt *cxt, void *prev, - const char *propname, const char *propval, - unsigned int proplen) -{ - struct ft_atom atom; - char *p = ft_root_node(cxt); - char *next; - int past_prev = prev ? 0 : 1; - int depth = -1; - - while ((next = ft_next(cxt, p, &atom)) != NULL) { - const void *data; - unsigned int size; - - switch (atom.tag) { - case OF_DT_BEGIN_NODE: - depth++; - - if (prev == p) { - past_prev = 1; - break; - } - - if (!past_prev || depth < 1) - break; - - data = __ft_get_prop(cxt, p, propname, &size); - if (!data || size != proplen) - break; - if (memcmp(data, propval, size)) - break; - - return p; - - case OF_DT_END_NODE: - if (depth-- == 0) - return NULL; - - break; - } - - p = next; - } - - return NULL; -} - -void *ft_find_node_by_prop_value(struct ft_cxt *cxt, const void *prev, - const char *propname, const char *propval, - int proplen) -{ - void *node = NULL; - - if (prev) { - node = ft_node_ph2node(cxt, prev); - - if (!node) - return NULL; - } - - node = __ft_find_node_by_prop_value(cxt, node, propname, - propval, proplen); - return ft_get_phandle(cxt, node); -} - -int ft_set_prop(struct ft_cxt *cxt, const void *phandle, const char *propname, - const void *buf, const unsigned int buflen) -{ - struct ft_atom atom; - void *node; - char *p, *next; - int nextra; - - node = ft_node_ph2node(cxt, phandle); - if (node == NULL) - return -1; - - next = ft_next(cxt, node, &atom); - if (atom.tag != OF_DT_BEGIN_NODE) - /* phandle didn't point to a node */ - return -1; - p = next; - - while ((next = ft_next(cxt, p, &atom)) != NULL) { - switch (atom.tag) { - case OF_DT_BEGIN_NODE: /* properties must go before subnodes */ - case OF_DT_END_NODE: - /* haven't found the property, insert here */ - cxt->p = p; - return ft_prop(cxt, propname, buf, buflen); - case OF_DT_PROP: - if (strcmp(atom.name, propname)) - break; - /* found an existing property, overwrite it */ - nextra = _ALIGN(buflen, 4) - _ALIGN(atom.size, 4); - cxt->p = atom.data; - if (nextra && !ft_make_space(cxt, &cxt->p, FT_STRUCT, - nextra)) - return -1; - *(u32 *) (cxt->p - 8) = cpu_to_be32(buflen); - ft_put_bin(cxt, buf, buflen); - return 0; - } - p = next; - } - return -1; -} - -int ft_del_prop(struct ft_cxt *cxt, const void *phandle, const char *propname) -{ - struct ft_atom atom; - void *node; - char *p, *next; - int size; - - node = ft_node_ph2node(cxt, phandle); - if (node == NULL) - return -1; - - p = node; - while ((next = ft_next(cxt, p, &atom)) != NULL) { - switch (atom.tag) { - case OF_DT_BEGIN_NODE: - case OF_DT_END_NODE: - return -1; - case OF_DT_PROP: - if (strcmp(atom.name, propname)) - break; - /* found the property, remove it */ - size = 12 + -_ALIGN(atom.size, 4); - cxt->p = p; - if (!ft_make_space(cxt, &cxt->p, FT_STRUCT, -size)) - return -1; - return 0; - } - p = next; - } - return -1; -} - -void *ft_create_node(struct ft_cxt *cxt, const void *parent, const char *name) -{ - struct ft_atom atom; - char *p, *next, *ret; - int depth = 0; - - if (parent) { - p = ft_node_ph2node(cxt, parent); - if (!p) - return NULL; - } else { - p = ft_root_node(cxt); - } - - while ((next = ft_next(cxt, p, &atom)) != NULL) { - switch (atom.tag) { - case OF_DT_BEGIN_NODE: - ++depth; - if (depth == 1 && strcmp(atom.name, name) == 0) - /* duplicate node name, return error */ - return NULL; - break; - case OF_DT_END_NODE: - --depth; - if (depth > 0) - break; - /* end of node, insert here */ - cxt->p = p; - ret = ft_begin_node(cxt, name); - ft_end_node(cxt); - return ft_get_phandle(cxt, ret); - } - p = next; - } - return NULL; -} - -/* Returns the start of the path within the provided buffer, or NULL on - * error. - */ -char *ft_get_path(struct ft_cxt *cxt, const void *phandle, - char *buf, int len) -{ - const char *path_comp[FT_MAX_DEPTH]; - struct ft_atom atom; - char *p, *next, *pos; - int depth = 0, i; - void *node; - - node = ft_node_ph2node(cxt, phandle); - if (node == NULL) - return NULL; - - p = ft_root_node(cxt); - - while ((next = ft_next(cxt, p, &atom)) != NULL) { - switch (atom.tag) { - case OF_DT_BEGIN_NODE: - path_comp[depth++] = atom.name; - if (p == node) - goto found; - - break; - - case OF_DT_END_NODE: - if (--depth == 0) - return NULL; - } - - p = next; - } - -found: - pos = buf; - for (i = 1; i < depth; i++) { - int this_len; - - if (len <= 1) - return NULL; - - *pos++ = '/'; - len--; - - strncpy(pos, path_comp[i], len); - - if (pos[len - 1] != 0) - return NULL; - - this_len = strlen(pos); - len -= this_len; - pos += this_len; - } - - return buf; -} diff --git a/arch/powerpc/boot/flatdevtree.h b/arch/powerpc/boot/flatdevtree.h deleted file mode 100644 index b0957a2d967..00000000000 --- a/arch/powerpc/boot/flatdevtree.h +++ /dev/null @@ -1,113 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - */ - -#ifndef FLATDEVTREE_H -#define FLATDEVTREE_H - -#include "flatdevtree_env.h" - -/* Definitions used by the flattened device tree */ -#define OF_DT_HEADER 0xd00dfeed /* marker */ -#define OF_DT_BEGIN_NODE 0x1 /* Start of node, full name */ -#define OF_DT_END_NODE 0x2 /* End node */ -#define OF_DT_PROP 0x3 /* Property: name off, size, content */ -#define OF_DT_NOP 0x4 /* nop */ -#define OF_DT_END 0x9 - -#define OF_DT_VERSION 0x10 - -struct boot_param_header { - u32 magic; /* magic word OF_DT_HEADER */ - u32 totalsize; /* total size of DT block */ - u32 off_dt_struct; /* offset to structure */ - u32 off_dt_strings; /* offset to strings */ - u32 off_mem_rsvmap; /* offset to memory reserve map */ - u32 version; /* format version */ - u32 last_comp_version; /* last compatible version */ - /* version 2 fields below */ - u32 boot_cpuid_phys; /* Physical CPU id we're booting on */ - /* version 3 fields below */ - u32 dt_strings_size; /* size of the DT strings block */ -}; - -struct ft_reserve { - u64 start; - u64 len; -}; - -struct ft_region { - char *start; - unsigned long size; -}; - -enum ft_rgn_id { - FT_RSVMAP, - FT_STRUCT, - FT_STRINGS, - FT_N_REGION -}; - -#define FT_MAX_DEPTH 50 - -struct ft_cxt { - struct boot_param_header *bph; - int max_size; /* maximum size of tree */ - int isordered; /* everything in standard order */ - void *(*realloc)(void *, unsigned long); - char *str_anchor; - char *p; /* current insertion point in structs */ - struct ft_region rgn[FT_N_REGION]; - void *genealogy[FT_MAX_DEPTH+1]; - char **node_tbl; - unsigned int node_max; - unsigned int nodes_used; -}; - -char *ft_begin_node(struct ft_cxt *cxt, const char *name); -void ft_end_node(struct ft_cxt *cxt); - -void ft_begin_tree(struct ft_cxt *cxt); -void ft_end_tree(struct ft_cxt *cxt); - -void ft_nop(struct ft_cxt *cxt); -int ft_prop(struct ft_cxt *cxt, const char *name, - const void *data, unsigned int sz); -int ft_prop_str(struct ft_cxt *cxt, const char *name, const char *str); -int ft_prop_int(struct ft_cxt *cxt, const char *name, unsigned int val); -void ft_begin(struct ft_cxt *cxt, void *blob, unsigned int max_size, - void *(*realloc_fn)(void *, unsigned long)); -int ft_open(struct ft_cxt *cxt, void *blob, unsigned int max_size, - unsigned int max_find_device, - void *(*realloc_fn)(void *, unsigned long)); -int ft_add_rsvmap(struct ft_cxt *cxt, u64 physaddr, u64 size); - -void ft_dump_blob(const void *bphp); -void ft_merge_blob(struct ft_cxt *cxt, void *blob); -void *ft_find_device(struct ft_cxt *cxt, const void *top, - const char *srch_path); -void *ft_find_descendent(struct ft_cxt *cxt, void *top, const char *srch_path); -int ft_get_prop(struct ft_cxt *cxt, const void *phandle, const char *propname, - void *buf, const unsigned int buflen); -int ft_set_prop(struct ft_cxt *cxt, const void *phandle, const char *propname, - const void *buf, const unsigned int buflen); -void *ft_get_parent(struct ft_cxt *cxt, const void *phandle); -void *ft_find_node_by_prop_value(struct ft_cxt *cxt, const void *prev, - const char *propname, const char *propval, - int proplen); -void *ft_create_node(struct ft_cxt *cxt, const void *parent, const char *name); -char *ft_get_path(struct ft_cxt *cxt, const void *phandle, char *buf, int len); - -#endif /* FLATDEVTREE_H */ diff --git a/arch/powerpc/boot/flatdevtree_misc.c b/arch/powerpc/boot/flatdevtree_misc.c deleted file mode 100644 index b3670096fa7..00000000000 --- a/arch/powerpc/boot/flatdevtree_misc.c +++ /dev/null @@ -1,79 +0,0 @@ -/* - * This file does the necessary interface mapping between the bootwrapper - * device tree operations and the interface provided by shared source - * files flatdevicetree.[ch]. - * - * Author: Mark A. Greer <mgreer@mvista.com> - * - * 2006 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#include <stddef.h> -#include "flatdevtree.h" -#include "ops.h" - -static struct ft_cxt cxt; - -static void *fdtm_finddevice(const char *name) -{ - return ft_find_device(&cxt, NULL, name); -} - -static int fdtm_getprop(const void *phandle, const char *propname, - void *buf, const int buflen) -{ - return ft_get_prop(&cxt, phandle, propname, buf, buflen); -} - -static int fdtm_setprop(const void *phandle, const char *propname, - const void *buf, const int buflen) -{ - return ft_set_prop(&cxt, phandle, propname, buf, buflen); -} - -static void *fdtm_get_parent(const void *phandle) -{ - return ft_get_parent(&cxt, phandle); -} - -static void *fdtm_create_node(const void *phandle, const char *name) -{ - return ft_create_node(&cxt, phandle, name); -} - -static void *fdtm_find_node_by_prop_value(const void *prev, - const char *propname, - const char *propval, - int proplen) -{ - return ft_find_node_by_prop_value(&cxt, prev, propname, - propval, proplen); -} - -static unsigned long fdtm_finalize(void) -{ - ft_end_tree(&cxt); - return (unsigned long)cxt.bph; -} - -static char *fdtm_get_path(const void *phandle, char *buf, int len) -{ - return ft_get_path(&cxt, phandle, buf, len); -} - -int ft_init(void *dt_blob, unsigned int max_size, unsigned int max_find_device) -{ - dt_ops.finddevice = fdtm_finddevice; - dt_ops.getprop = fdtm_getprop; - dt_ops.setprop = fdtm_setprop; - dt_ops.get_parent = fdtm_get_parent; - dt_ops.create_node = fdtm_create_node; - dt_ops.find_node_by_prop_value = fdtm_find_node_by_prop_value; - dt_ops.finalize = fdtm_finalize; - dt_ops.get_path = fdtm_get_path; - - return ft_open(&cxt, dt_blob, max_size, max_find_device, - platform_ops.realloc); -} diff --git a/arch/powerpc/boot/holly.c b/arch/powerpc/boot/holly.c index 199e783aea4..58013b92317 100644 --- a/arch/powerpc/boot/holly.c +++ b/arch/powerpc/boot/holly.c @@ -28,6 +28,6 @@ void platform_init(unsigned long r3, unsigned long r4, unsigned long r5) u32 heapsize = 0x8000000 - (u32)_end; /* 128M */ simple_alloc_init(_end, heapsize, 32, 64); - ft_init(_dtb_start, 0, 4); + fdt_init(_dtb_start); serial_console_init(); } diff --git a/arch/powerpc/boot/libfdt-wrapper.c b/arch/powerpc/boot/libfdt-wrapper.c new file mode 100644 index 00000000000..59016bef139 --- /dev/null +++ b/arch/powerpc/boot/libfdt-wrapper.c @@ -0,0 +1,193 @@ +/* + * This file does the necessary interface mapping between the bootwrapper + * device tree operations and the interface provided by shared source + * files flatdevicetree.[ch]. + * + * Copyright 2007 David Gibson, IBM Corporation. + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this library; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#include <stddef.h> +#include <stdio.h> +#include <page.h> +#include <libfdt.h> +#include "ops.h" + +#define DEBUG 0 +#define BAD_ERROR(err) (((err) < 0) \ + && ((err) != -FDT_ERR_NOTFOUND) \ + && ((err) != -FDT_ERR_EXISTS)) + +#define check_err(err) \ + ({ \ + if (BAD_ERROR(err) || ((err < 0) && DEBUG)) \ + printf("%s():%d %s\n\r", __FUNCTION__, __LINE__, \ + fdt_strerror(err)); \ + if (BAD_ERROR(err)) \ + exit(); \ + (err < 0) ? -1 : 0; \ + }) + +#define offset_devp(off) \ + ({ \ + int _offset = (off); \ + check_err(_offset) ? NULL : (void *)(_offset+1); \ + }) + +#define devp_offset_find(devp) (((int)(devp))-1) +#define devp_offset(devp) (devp ? ((int)(devp))-1 : 0) + +static void *fdt; +static void *buf; /* = NULL */ + +#define EXPAND_GRANULARITY 1024 + +static void expand_buf(int minexpand) +{ + int size = fdt_totalsize(fdt); + int rc; + + size = _ALIGN(size + minexpand, EXPAND_GRANULARITY); + buf = platform_ops.realloc(buf, size); + if (!buf) + fatal("Couldn't find %d bytes to expand device tree\n\r", size); + rc = fdt_open_into(fdt, buf, size); + if (rc != 0) + fatal("Couldn't expand fdt into new buffer: %s\n\r", + fdt_strerror(rc)); + + fdt = buf; +} + +static void *fdt_wrapper_finddevice(const char *path) +{ + return offset_devp(fdt_path_offset(fdt, path)); +} + +static int fdt_wrapper_getprop(const void *devp, const char *name, + void *buf, const int buflen) +{ + const void *p; + int len; + + p = fdt_getprop(fdt, devp_offset(devp), name, &len); + if (!p) + return check_err(len); + memcpy(buf, p, min(len, buflen)); + return len; +} + +static int fdt_wrapper_setprop(const void *devp, const char *name, + const void *buf, const int len) +{ + int rc; + + rc = fdt_setprop(fdt, devp_offset(devp), name, buf, len); + if (rc == -FDT_ERR_NOSPACE) { + expand_buf(len + 16); + rc = fdt_setprop(fdt, devp_offset(devp), name, buf, len); + } + + return check_err(rc); +} + +static void *fdt_wrapper_get_parent(const void *devp) +{ + return offset_devp(fdt_parent_offset(fdt, devp_offset(devp))); +} + +static void *fdt_wrapper_create_node(const void *devp, const char *name) +{ + int offset; + + offset = fdt_add_subnode(fdt, devp_offset(devp), name); + if (offset == -FDT_ERR_NOSPACE) { + expand_buf(strlen(name) + 16); + offset = fdt_add_subnode(fdt, devp_offset(devp), name); + } + + return offset_devp(offset); +} + +static void *fdt_wrapper_find_node_by_prop_value(const void *prev, + const char *name, + const char *val, + int len) +{ + int offset = fdt_node_offset_by_prop_value(fdt, devp_offset_find(prev), + name, val, len); + return offset_devp(offset); +} + +static void *fdt_wrapper_find_node_by_compatible(const void *prev, + const char *val) +{ + int offset = fdt_node_offset_by_compatible(fdt, devp_offset_find(prev), + val); + return offset_devp(offset); +} + +static char *fdt_wrapper_get_path(const void *devp, char *buf, int len) +{ + int rc; + + rc = fdt_get_path(fdt, devp_offset(devp), buf, len); + if (check_err(rc)) + return NULL; + return buf; +} + +static unsigned long fdt_wrapper_finalize(void) +{ + int rc; + + rc = fdt_pack(fdt); + if (rc != 0) + fatal("Couldn't pack flat tree: %s\n\r", + fdt_strerror(rc)); + return (unsigned long)fdt; +} + +void fdt_init(void *blob) +{ + int err; + + dt_ops.finddevice = fdt_wrapper_finddevice; + dt_ops.getprop = fdt_wrapper_getprop; + dt_ops.setprop = fdt_wrapper_setprop; + dt_ops.get_parent = fdt_wrapper_get_parent; + dt_ops.create_node = fdt_wrapper_create_node; + dt_ops.find_node_by_prop_value = fdt_wrapper_find_node_by_prop_value; + dt_ops.find_node_by_compatible = fdt_wrapper_find_node_by_compatible; + dt_ops.get_path = fdt_wrapper_get_path; + dt_ops.finalize = fdt_wrapper_finalize; + + /* Make sure the dt blob is the right version and so forth */ + fdt = blob; + err = fdt_open_into(fdt, fdt, fdt_totalsize(blob)); + if (err == -FDT_ERR_NOSPACE) { + int bufsize = fdt_totalsize(fdt) + 4; + buf = malloc(bufsize); + err = fdt_open_into(fdt, buf, bufsize); + } + + if (err != 0) + fatal("fdt_init(): %s\n\r", fdt_strerror(err)); + + if (buf) + fdt = buf; +} diff --git a/arch/powerpc/boot/libfdt/Makefile.libfdt b/arch/powerpc/boot/libfdt/Makefile.libfdt new file mode 100644 index 00000000000..82f9c6a8287 --- /dev/null +++ b/arch/powerpc/boot/libfdt/Makefile.libfdt @@ -0,0 +1,14 @@ +# Makefile.libfdt +# +# This is not a complete Makefile of itself. Instead, it is designed to +# be easily embeddable into other systems of Makefiles. +# +LIBFDT_SRCS = fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c +LIBFDT_INCLUDES = fdt.h libfdt.h +LIBFDT_EXTRA = libfdt_internal.h +LIBFDT_LIB = libfdt/libfdt.a + +LIBFDT_OBJS = $(LIBFDT_SRCS:%.c=%.o) + +$(LIBFDT_objdir)/$(LIBFDT_LIB): $(addprefix $(LIBFDT_objdir)/,$(LIBFDT_OBJS)) + diff --git a/arch/powerpc/boot/libfdt/fdt.c b/arch/powerpc/boot/libfdt/fdt.c new file mode 100644 index 00000000000..586a36136db --- /dev/null +++ b/arch/powerpc/boot/libfdt/fdt.c @@ -0,0 +1,156 @@ +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2006 David Gibson, IBM Corporation. + * + * libfdt is dual licensed: you can use it either under the terms of + * the GPL, or the BSD license, at your option. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Alternatively, + * + * b) Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * 1. Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * 2. Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND + * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR + * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#include "libfdt_env.h" + +#include <fdt.h> +#include <libfdt.h> + +#include "libfdt_internal.h" + +int fdt_check_header(const void *fdt) +{ + if (fdt_magic(fdt) == FDT_MAGIC) { + /* Complete tree */ + if (fdt_version(fdt) < FDT_FIRST_SUPPORTED_VERSION) + return -FDT_ERR_BADVERSION; + if (fdt_last_comp_version(fdt) > FDT_LAST_SUPPORTED_VERSION) + return -FDT_ERR_BADVERSION; + } else if (fdt_magic(fdt) == SW_MAGIC) { + /* Unfinished sequential-write blob */ + if (fdt_size_dt_struct(fdt) == 0) + return -FDT_ERR_BADSTATE; + } else { + return -FDT_ERR_BADMAGIC; + } + + return 0; +} + +const void *fdt_offset_ptr(const void *fdt, int offset, int len) +{ + const void *p; + + if (fdt_version(fdt) >= 0x11) + if (((offset + len) < offset) + || ((offset + len) > fdt_size_dt_struct(fdt))) + return NULL; + + p = _fdt_offset_ptr(fdt, offset); + + if (p + len < p) + return NULL; + return p; +} + +uint32_t fdt_next_tag(const void *fdt, int offset, int *nextoffset) +{ + const uint32_t *tagp, *lenp; + uint32_t tag; + const char *p; + + if (offset % FDT_TAGSIZE) + return -1; + + tagp = fdt_offset_ptr(fdt, offset, FDT_TAGSIZE); + if (! tagp) + return FDT_END; /* premature end */ + tag = fdt32_to_cpu(*tagp); + offset += FDT_TAGSIZE; + + switch (tag) { + case FDT_BEGIN_NODE: + /* skip name */ + do { + p = fdt_offset_ptr(fdt, offset++, 1); + } while (p && (*p != '\0')); + if (! p) + return FDT_END; + break; + case FDT_PROP: + lenp = fdt_offset_ptr(fdt, offset, sizeof(*lenp)); + if (! lenp) + return FDT_END; + /* skip name offset, length and value */ + offset += 2*FDT_TAGSIZE + fdt32_to_cpu(*lenp); + break; + } + + if (nextoffset) + *nextoffset = ALIGN(offset, FDT_TAGSIZE); + + return tag; +} + +const char *_fdt_find_string(const char *strtab, int tabsize, const char *s) +{ + int len = strlen(s) + 1; + const char *last = strtab + tabsize - len; + const char *p; + + for (p = strtab; p <= last; p++) + if (memeq(p, s, len)) + return p; + return NULL; +} + +int fdt_move(const void *fdt, void *buf, int bufsize) +{ + int err = fdt_check_header(fdt); + + if (err) + return err; + + if (fdt_totalsize(fdt) > bufsize) + return -FDT_ERR_NOSPACE; + + memmove(buf, fdt, fdt_totalsize(fdt)); + return 0; +} diff --git a/arch/powerpc/boot/libfdt/fdt.h b/arch/powerpc/boot/libfdt/fdt.h new file mode 100644 index 00000000000..48ccfd91000 --- /dev/null +++ b/arch/powerpc/boot/libfdt/fdt.h @@ -0,0 +1,60 @@ +#ifndef _FDT_H +#define _FDT_H + +#ifndef __ASSEMBLY__ + +struct fdt_header { + uint32_t magic; /* magic word FDT_MAGIC */ + uint32_t totalsize; /* total size of DT block */ + uint32_t off_dt_struct; /* offset to structure */ + uint32_t off_dt_strings; /* offset to strings */ + uint32_t off_mem_rsvmap; /* offset to memory reserve map */ + uint32_t version; /* format version */ + uint32_t last_comp_version; /* last compatible version */ + + /* version 2 fields below */ + uint32_t boot_cpuid_phys; /* Which physical CPU id we're + booting on */ + /* version 3 fields below */ + uint32_t size_dt_strings; /* size of the strings block */ + + /* version 17 fields below */ + uint32_t size_dt_struct; /* size of the structure block */ +}; + +struct fdt_reserve_entry { + uint64_t address; + uint64_t size; +}; + +struct fdt_node_header { + uint32_t tag; + char name[0]; +}; + +struct fdt_property { + uint32_t tag; + uint32_t len; + uint32_t nameoff; + char data[0]; +}; + +#endif /* !__ASSEMBLY */ + +#define FDT_MAGIC 0xd00dfeed /* 4: version, 4: total size */ +#define FDT_TAGSIZE sizeof(uint32_t) + +#define FDT_BEGIN_NODE 0x1 /* Start node: full name */ +#define FDT_END_NODE 0x2 /* End node */ +#define FDT_PROP 0x3 /* Property: name off, + size, content */ +#define FDT_NOP 0x4 /* nop */ +#define FDT_END 0x9 + +#define FDT_V1_SIZE (7*sizeof(uint32_t)) +#define FDT_V2_SIZE (FDT_V1_SIZE + sizeof(uint32_t)) +#define FDT_V3_SIZE (FDT_V2_SIZE + sizeof(uint32_t)) +#define FDT_V16_SIZE FDT_V3_SIZE +#define FDT_V17_SIZE (FDT_V16_SIZE + sizeof(uint32_t)) + +#endif /* _FDT_H */ diff --git a/arch/powerpc/boot/libfdt/fdt_ro.c b/arch/powerpc/boot/libfdt/fdt_ro.c new file mode 100644 index 00000000000..12a37d59f96 --- /dev/null +++ b/arch/powerpc/boot/libfdt/fdt_ro.c @@ -0,0 +1,583 @@ +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2006 David Gibson, IBM Corporation. + * + * libfdt is dual licensed: you can use it either under the terms of + * the GPL, or the BSD license, at your option. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Alternatively, + * + * b) Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * 1. Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * 2. Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND + * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR + * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#include "libfdt_env.h" + +#include <fdt.h> +#include <libfdt.h> + +#include "libfdt_internal.h" + +#define CHECK_HEADER(fdt) \ + { \ + int err; \ + if ((err = fdt_check_header(fdt)) != 0) \ + return err; \ + } + +static int nodename_eq(const void *fdt, int offset, + const char *s, int len) +{ + const char *p = fdt_offset_ptr(fdt, offset, len+1); + + if (! p) + /* short match */ + return 0; + + if (memcmp(p, s, len) != 0) + return 0; + + if (p[len] == '\0') + return 1; + else if (!memchr(s, '@', len) && (p[len] == '@')) + return 1; + else + return 0; +} + +const char *fdt_string(const void *fdt, int stroffset) +{ + return (char *)fdt + fdt_off_dt_strings(fdt) + stroffset; +} + +int fdt_get_mem_rsv(const void *fdt, int n, uint64_t *address, uint64_t *size) +{ + CHECK_HEADER(fdt); + *address = fdt64_to_cpu(_fdt_mem_rsv(fdt, n)->address); + *size = fdt64_to_cpu(_fdt_mem_rsv(fdt, n)->size); + return 0; +} + +int fdt_num_mem_rsv(const void *fdt) +{ + int i = 0; + + while (fdt64_to_cpu(_fdt_mem_rsv(fdt, i)->size) != 0) + i++; + return i; +} + +int fdt_subnode_offset_namelen(const void *fdt, int parentoffset, + const char *name, int namelen) +{ + int level = 0; + uint32_t tag; + int offset, nextoffset; + + CHECK_HEADER(fdt); + + tag = fdt_next_tag(fdt, parentoffset, &nextoffset); + if (tag != FDT_BEGIN_NODE) + return -FDT_ERR_BADOFFSET; + + do { + offset = nextoffset; + tag = fdt_next_tag(fdt, offset, &nextoffset); + + switch (tag) { + case FDT_END: + return -FDT_ERR_TRUNCATED; + + case FDT_BEGIN_NODE: + level++; + if (level != 1) + continue; + if (nodename_eq(fdt, offset+FDT_TAGSIZE, name, namelen)) + /* Found it! */ + return offset; + break; + + case FDT_END_NODE: + level--; + break; + + case FDT_PROP: + case FDT_NOP: + break; + + default: + return -FDT_ERR_BADSTRUCTURE; + } + } while (level >= 0); + + return -FDT_ERR_NOTFOUND; +} + +int fdt_subnode_offset(const void *fdt, int parentoffset, + const char *name) +{ + return fdt_subnode_offset_namelen(fdt, parentoffset, name, strlen(name)); +} + +int fdt_path_offset(const void *fdt, const char *path) +{ + const char *end = path + strlen(path); + const char *p = path; + int offset = 0; + + CHECK_HEADER(fdt); + + if (*path != '/') + return -FDT_ERR_BADPATH; + + while (*p) { + const char *q; + + while (*p == '/') + p++; + if (! *p) + return offset; + q = strchr(p, '/'); + if (! q) + q = end; + + offset = fdt_subnode_offset_namelen(fdt, offset, p, q-p); + if (offset < 0) + return offset; + + p = q; + } + + return offset; +} + +const char *fdt_get_name(const void *fdt, int nodeoffset, int *len) +{ + const struct fdt_node_header *nh; + int err; + + if ((err = fdt_check_header(fdt)) != 0) + goto fail; + + err = -FDT_ERR_BADOFFSET; + nh = fdt_offset_ptr(fdt, nodeoffset, sizeof(*nh)); + if (!nh || (fdt32_to_cpu(nh->tag) != FDT_BEGIN_NODE)) + goto fail; + + if (len) + *len = strlen(nh->name); + + return nh->name; + + fail: + if (len) + *len = err; + return NULL; +} + +const struct fdt_property *fdt_get_property(const void *fdt, + int nodeoffset, + const char *name, int *lenp) +{ + uint32_t tag; + const struct fdt_property *prop; + int namestroff; + int offset, nextoffset; + int err; + + if ((err = fdt_check_header(fdt)) != 0) + goto fail; + + err = -FDT_ERR_BADOFFSET; + if (nodeoffset % FDT_TAGSIZE) + goto fail; + + tag = fdt_next_tag(fdt, nodeoffset, &nextoffset); + if (tag != FDT_BEGIN_NODE) + goto fail; + + do { + offset = nextoffset; + + tag = fdt_next_tag(fdt, offset, &nextoffset); + switch (tag) { + case FDT_END: + err = -FDT_ERR_TRUNCATED; + goto fail; + + case FDT_BEGIN_NODE: + case FDT_END_NODE: + case FDT_NOP: + break; + + case FDT_PROP: + err = -FDT_ERR_BADSTRUCTURE; + prop = fdt_offset_ptr(fdt, offset, sizeof(*prop)); + if (! prop) + goto fail; + namestroff = fdt32_to_cpu(prop->nameoff); + if (streq(fdt_string(fdt, namestroff), name)) { + /* Found it! */ + int len = fdt32_to_cpu(prop->len); + prop = fdt_offset_ptr(fdt, offset, + sizeof(*prop)+len); + if (! prop) + goto fail; + + if (lenp) + *lenp = len; + + return prop; + } + break; + + default: + err = -FDT_ERR_BADSTRUCTURE; + goto fail; + } + } while ((tag != FDT_BEGIN_NODE) && (tag != FDT_END_NODE)); + + err = -FDT_ERR_NOTFOUND; + fail: + if (lenp) + *lenp = err; + return NULL; +} + +const void *fdt_getprop(const void *fdt, int nodeoffset, + const char *name, int *lenp) +{ + const struct fdt_property *prop; + + prop = fdt_get_property(fdt, nodeoffset, name, lenp); + if (! prop) + return NULL; + + return prop->data; +} + +uint32_t fdt_get_phandle(const void *fdt, int nodeoffset) +{ + const uint32_t *php; + int len; + + php = fdt_getprop(fdt, nodeoffset, "linux,phandle", &len); + if (!php || (len != sizeof(*php))) + return 0; + + return fdt32_to_cpu(*php); +} + +int fdt_get_path(const void *fdt, int nodeoffset, char *buf, int buflen) +{ + uint32_t tag; + int p = 0, overflow = 0; + int offset, nextoffset, namelen; + const char *name; + + CHECK_HEADER(fdt); + + tag = fdt_next_tag(fdt, 0, &nextoffset); + if (tag != FDT_BEGIN_NODE) + return -FDT_ERR_BADSTRUCTURE; + + if (buflen < 2) + return -FDT_ERR_NOSPACE; + buf[0] = '/'; + p = 1; + + while (nextoffset <= nodeoffset) { + offset = nextoffset; + tag = fdt_next_tag(fdt, offset, &nextoffset); + switch (tag) { + case FDT_END: + return -FDT_ERR_BADOFFSET; + + case FDT_BEGIN_NODE: + name = fdt_get_name(fdt, offset, &namelen); + if (!name) + return namelen; + if (overflow || ((p + namelen + 1) > buflen)) { + overflow++; + break; + } + memcpy(buf + p, name, namelen); + p += namelen; + buf[p++] = '/'; + break; + + case FDT_END_NODE: + if (overflow) { + overflow--; + break; + } + do { + p--; + } while (buf[p-1] != '/'); + break; + + case FDT_PROP: + case FDT_NOP: + break; + + default: + return -FDT_ERR_BADSTRUCTURE; + } + } + + if (overflow) + return -FDT_ERR_NOSPACE; + + if (p > 1) /* special case so that root path is "/", not "" */ + p--; + buf[p] = '\0'; + return p; +} + +int fdt_supernode_atdepth_offset(const void *fdt, int nodeoffset, + int supernodedepth, int *nodedepth) +{ + int level = -1; + uint32_t tag; + int offset, nextoffset = 0; + int supernodeoffset = -FDT_ERR_INTERNAL; + + CHECK_HEADER(fdt); + + if (supernodedepth < 0) + return -FDT_ERR_NOTFOUND; + + do { + offset = nextoffset; + tag = fdt_next_tag(fdt, offset, &nextoffset); + switch (tag) { + case FDT_END: + return -FDT_ERR_BADOFFSET; + + case FDT_BEGIN_NODE: + level++; + if (level == supernodedepth) + supernodeoffset = offset; + break; + + case FDT_END_NODE: + level--; + break; + + case FDT_PROP: + case FDT_NOP: + break; + + default: + return -FDT_ERR_BADSTRUCTURE; + } + } while (offset < nodeoffset); + + if (nodedepth) + *nodedepth = level; + + if (supernodedepth > level) + return -FDT_ERR_NOTFOUND; + return supernodeoffset; +} + +int fdt_node_depth(const void *fdt, int nodeoffset) +{ + int nodedepth; + int err; + + err = fdt_supernode_atdepth_offset(fdt, nodeoffset, 0, &nodedepth); + if (err) + return (err < 0) ? err : -FDT_ERR_INTERNAL; + return nodedepth; +} + +int fdt_parent_offset(const void *fdt, int nodeoffset) +{ + int nodedepth = fdt_node_depth(fdt, nodeoffset); + + if (nodedepth < 0) + return nodedepth; + return fdt_supernode_atdepth_offset(fdt, nodeoffset, + nodedepth - 1, NULL); +} + +int fdt_node_offset_by_prop_value(const void *fdt, int startoffset, + const char *propname, + const void *propval, int proplen) +{ + uint32_t tag; + int offset, nextoffset; + const void *val; + int len; + + CHECK_HEADER(fdt); + + if (startoffset >= 0) { + tag = fdt_next_tag(fdt, startoffset, &nextoffset); + if (tag != FDT_BEGIN_NODE) + return -FDT_ERR_BADOFFSET; + } else { + nextoffset = 0; + } + + /* FIXME: The algorithm here is pretty horrible: we scan each + * property of a node in fdt_getprop(), then if that didn't + * find what we want, we scan over them again making our way + * to the next node. Still it's the easiest to implement + * approach; performance can come later. */ + do { + offset = nextoffset; + tag = fdt_next_tag(fdt, offset, &nextoffset); + + switch (tag) { + case FDT_BEGIN_NODE: + val = fdt_getprop(fdt, offset, propname, &len); + if (val + && (len == proplen) + && (memcmp(val, propval, len) == 0)) + return offset; + break; + + case FDT_PROP: + case FDT_END: + case FDT_END_NODE: + case FDT_NOP: + break; + + default: + return -FDT_ERR_BADSTRUCTURE; + } + } while (tag != FDT_END); + + return -FDT_ERR_NOTFOUND; +} + +int fdt_node_offset_by_phandle(const void *fdt, uint32_t phandle) +{ + if ((phandle == 0) || (phandle == -1)) + return -FDT_ERR_BADPHANDLE; + phandle = cpu_to_fdt32(phandle); + return fdt_node_offset_by_prop_value(fdt, -1, "linux,phandle", + &phandle, sizeof(phandle)); +} + +int _stringlist_contains(const void *strlist, int listlen, const char *str) +{ + int len = strlen(str); + const void *p; + + while (listlen >= len) { + if (memcmp(str, strlist, len+1) == 0) + return 1; + p = memchr(strlist, '\0', listlen); + if (!p) + return 0; /* malformed strlist.. */ + listlen -= (p-strlist) + 1; + strlist = p + 1; + } + return 0; +} + +int fdt_node_check_compatible(const void *fdt, int nodeoffset, + const char *compatible) +{ + const void *prop; + int len; + + prop = fdt_getprop(fdt, nodeoffset, "compatible", &len); + if (!prop) + return len; + if (_stringlist_contains(prop, len, compatible)) + return 0; + else + return 1; +} + +int fdt_node_offset_by_compatible(const void *fdt, int startoffset, + const char *compatible) +{ + uint32_t tag; + int offset, nextoffset; + int err; + + CHECK_HEADER(fdt); + + if (startoffset >= 0) { + tag = fdt_next_tag(fdt, startoffset, &nextoffset); + if (tag != FDT_BEGIN_NODE) + return -FDT_ERR_BADOFFSET; + } else { + nextoffset = 0; + } + + /* FIXME: The algorithm here is pretty horrible: we scan each + * property of a node in fdt_node_check_compatible(), then if + * that didn't find what we want, we scan over them again + * making our way to the next node. Still it's the easiest to + * implement approach; performance can come later. */ + do { + offset = nextoffset; + tag = fdt_next_tag(fdt, offset, &nextoffset); + + switch (tag) { + case FDT_BEGIN_NODE: + err = fdt_node_check_compatible(fdt, offset, + compatible); + if ((err < 0) + && (err != -FDT_ERR_NOTFOUND)) + return err; + else if (err == 0) + return offset; + break; + + case FDT_PROP: + case FDT_END: + case FDT_END_NODE: + case FDT_NOP: + break; + + default: + return -FDT_ERR_BADSTRUCTURE; + } + } while (tag != FDT_END); + + return -FDT_ERR_NOTFOUND; +} diff --git a/arch/powerpc/boot/libfdt/fdt_rw.c b/arch/powerpc/boot/libfdt/fdt_rw.c new file mode 100644 index 00000000000..6673f8ec962 --- /dev/null +++ b/arch/powerpc/boot/libfdt/fdt_rw.c @@ -0,0 +1,447 @@ +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2006 David Gibson, IBM Corporation. + * + * libfdt is dual licensed: you can use it either under the terms of + * the GPL, or the BSD license, at your option. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Alternatively, + * + * b) Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * 1. Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * 2. Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND + * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR + * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#include "libfdt_env.h" + +#include <fdt.h> +#include <libfdt.h> + +#include "libfdt_internal.h" + +static int _blocks_misordered(const void *fdt, + int mem_rsv_size, int struct_size) +{ + return (fdt_off_mem_rsvmap(fdt) < ALIGN(sizeof(struct fdt_header), 8)) + || (fdt_off_dt_struct(fdt) < + (fdt_off_mem_rsvmap(fdt) + mem_rsv_size)) + || (fdt_off_dt_strings(fdt) < + (fdt_off_dt_struct(fdt) + struct_size)) + || (fdt_totalsize(fdt) < + (fdt_off_dt_strings(fdt) + fdt_size_dt_strings(fdt))); +} + +static int rw_check_header(void *fdt) +{ + int err; + + if ((err = fdt_check_header(fdt))) + return err; + if (fdt_version(fdt) < 17) + return -FDT_ERR_BADVERSION; + if (_blocks_misordered(fdt, sizeof(struct fdt_reserve_entry), + fdt_size_dt_struct(fdt))) + return -FDT_ERR_BADLAYOUT; + if (fdt_version(fdt) > 17) + fdt_set_version(fdt, 17); + + return 0; +} + +#define RW_CHECK_HEADER(fdt) \ + { \ + int err; \ + if ((err = rw_check_header(fdt)) != 0) \ + return err; \ + } + +static inline int _blob_data_size(void *fdt) +{ + return fdt_off_dt_strings(fdt) + fdt_size_dt_strings(fdt); +} + +static int _blob_splice(void *fdt, void *p, int oldlen, int newlen) +{ + void *end = fdt + _blob_data_size(fdt); + + if (((p + oldlen) < p) || ((p + oldlen) > end)) + return -FDT_ERR_BADOFFSET; + if ((end - oldlen + newlen) > (fdt + fdt_totalsize(fdt))) + return -FDT_ERR_NOSPACE; + memmove(p + newlen, p + oldlen, end - p - oldlen); + return 0; +} + +static int _blob_splice_mem_rsv(void *fdt, struct fdt_reserve_entry *p, + int oldn, int newn) +{ + int delta = (newn - oldn) * sizeof(*p); + int err; + err = _blob_splice(fdt, p, oldn * sizeof(*p), newn * sizeof(*p)); + if (err) + return err; + fdt_set_off_dt_struct(fdt, fdt_off_dt_struct(fdt) + delta); + fdt_set_off_dt_strings(fdt, fdt_off_dt_strings(fdt) + delta); + return 0; +} + +static int _blob_splice_struct(void *fdt, void *p, + int oldlen, int newlen) +{ + int delta = newlen - oldlen; + int err; + + if ((err = _blob_splice(fdt, p, oldlen, newlen))) + return err; + + fdt_set_size_dt_struct(fdt, fdt_size_dt_struct(fdt) + delta); + fdt_set_off_dt_strings(fdt, fdt_off_dt_strings(fdt) + delta); + return 0; +} + +static int _blob_splice_string(void *fdt, int newlen) +{ + void *p = fdt + fdt_off_dt_strings(fdt) + fdt_size_dt_strings(fdt); + int err; + + if ((err = _blob_splice(fdt, p, 0, newlen))) + return err; + + fdt_set_size_dt_strings(fdt, fdt_size_dt_strings(fdt) + newlen); + return 0; +} + +static int _find_add_string(void *fdt, const char *s) +{ + char *strtab = (char *)fdt + fdt_off_dt_strings(fdt); + const char *p; + char *new; + int len = strlen(s) + 1; + int err; + + p = _fdt_find_string(strtab, fdt_size_dt_strings(fdt), s); + if (p) + /* found it */ + return (p - strtab); + + new = strtab + fdt_size_dt_strings(fdt); + err = _blob_splice_string(fdt, len); + if (err) + return err; + + memcpy(new, s, len); + return (new - strtab); +} + +int fdt_add_mem_rsv(void *fdt, uint64_t address, uint64_t size) +{ + struct fdt_reserve_entry *re; + int err; + + if ((err = rw_check_header(fdt))) + return err; + + re = _fdt_mem_rsv_w(fdt, fdt_num_mem_rsv(fdt)); + err = _blob_splice_mem_rsv(fdt, re, 0, 1); + if (err) + return err; + + re->address = cpu_to_fdt64(address); + re->size = cpu_to_fdt64(size); + return 0; +} + +int fdt_del_mem_rsv(void *fdt, int n) +{ + struct fdt_reserve_entry *re = _fdt_mem_rsv_w(fdt, n); + int err; + + if ((err = rw_check_header(fdt))) + return err; + if (n >= fdt_num_mem_rsv(fdt)) + return -FDT_ERR_NOTFOUND; + + err = _blob_splice_mem_rsv(fdt, re, 1, 0); + if (err) + return err; + return 0; +} + +static int _resize_property(void *fdt, int nodeoffset, const char *name, int len, + struct fdt_property **prop) +{ + int oldlen; + int err; + + *prop = fdt_get_property_w(fdt, nodeoffset, name, &oldlen); + if (! (*prop)) + return oldlen; + + if ((err = _blob_splice_struct(fdt, (*prop)->data, + ALIGN(oldlen, FDT_TAGSIZE), + ALIGN(len, FDT_TAGSIZE)))) + return err; + + (*prop)->len = cpu_to_fdt32(len); + return 0; +} + +static int _add_property(void *fdt, int nodeoffset, const char *name, int len, + struct fdt_property **prop) +{ + uint32_t tag; + int proplen; + int nextoffset; + int namestroff; + int err; + + tag = fdt_next_tag(fdt, nodeoffset, &nextoffset); + if (tag != FDT_BEGIN_NODE) + return -FDT_ERR_BADOFFSET; + + namestroff = _find_add_string(fdt, name); + if (namestroff < 0) + return namestroff; + + *prop = _fdt_offset_ptr_w(fdt, nextoffset); + proplen = sizeof(**prop) + ALIGN(len, FDT_TAGSIZE); + + err = _blob_splice_struct(fdt, *prop, 0, proplen); + if (err) + return err; + + (*prop)->tag = cpu_to_fdt32(FDT_PROP); + (*prop)->nameoff = cpu_to_fdt32(namestroff); + (*prop)->len = cpu_to_fdt32(len); + return 0; +} + +int fdt_setprop(void *fdt, int nodeoffset, const char *name, + const void *val, int len) +{ + struct fdt_property *prop; + int err; + + if ((err = rw_check_header(fdt))) + return err; + + err = _resize_property(fdt, nodeoffset, name, len, &prop); + if (err == -FDT_ERR_NOTFOUND) + err = _add_property(fdt, nodeoffset, name, len, &prop); + if (err) + return err; + + memcpy(prop->data, val, len); + return 0; +} + +int fdt_delprop(void *fdt, int nodeoffset, const char *name) +{ + struct fdt_property *prop; + int len, proplen; + + RW_CHECK_HEADER(fdt); + + prop = fdt_get_property_w(fdt, nodeoffset, name, &len); + if (! prop) + return len; + + proplen = sizeof(*prop) + ALIGN(len, FDT_TAGSIZE); + return _blob_splice_struct(fdt, prop, proplen, 0); +} + +int fdt_add_subnode_namelen(void *fdt, int parentoffset, + const char *name, int namelen) +{ + struct fdt_node_header *nh; + int offset, nextoffset; + int nodelen; + int err; + uint32_t tag; + uint32_t *endtag; + + RW_CHECK_HEADER(fdt); + + offset = fdt_subnode_offset_namelen(fdt, parentoffset, name, namelen); + if (offset >= 0) + return -FDT_ERR_EXISTS; + else if (offset != -FDT_ERR_NOTFOUND) + return offset; + + /* Try to place the new node after the parent's properties */ + fdt_next_tag(fdt, parentoffset, &nextoffset); /* skip the BEGIN_NODE */ + do { + offset = nextoffset; + tag = fdt_next_tag(fdt, offset, &nextoffset); + } while (tag == FDT_PROP); + + nh = _fdt_offset_ptr_w(fdt, offset); + nodelen = sizeof(*nh) + ALIGN(namelen+1, FDT_TAGSIZE) + FDT_TAGSIZE; + + err = _blob_splice_struct(fdt, nh, 0, nodelen); + if (err) + return err; + + nh->tag = cpu_to_fdt32(FDT_BEGIN_NODE); + memset(nh->name, 0, ALIGN(namelen+1, FDT_TAGSIZE)); + memcpy(nh->name, name, namelen); + endtag = (uint32_t *)((void *)nh + nodelen - FDT_TAGSIZE); + *endtag = cpu_to_fdt32(FDT_END_NODE); + + return offset; +} + +int fdt_add_subnode(void *fdt, int parentoffset, const char *name) +{ + return fdt_add_subnode_namelen(fdt, parentoffset, name, strlen(name)); +} + +int fdt_del_node(void *fdt, int nodeoffset) +{ + int endoffset; + + RW_CHECK_HEADER(fdt); + + endoffset = _fdt_node_end_offset(fdt, nodeoffset); + if (endoffset < 0) + return endoffset; + + return _blob_splice_struct(fdt, _fdt_offset_ptr_w(fdt, nodeoffset), + endoffset - nodeoffset, 0); +} + +static void _packblocks(const void *fdt, void *buf, + int mem_rsv_size, int struct_size) +{ + int mem_rsv_off, struct_off, strings_off; + + mem_rsv_off = ALIGN(sizeof(struct fdt_header), 8); + struct_off = mem_rsv_off + mem_rsv_size; + strings_off = struct_off + struct_size; + + memmove(buf + mem_rsv_off, fdt + fdt_off_mem_rsvmap(fdt), mem_rsv_size); + fdt_set_off_mem_rsvmap(buf, mem_rsv_off); + + memmove(buf + struct_off, fdt + fdt_off_dt_struct(fdt), struct_size); + fdt_set_off_dt_struct(buf, struct_off); + fdt_set_size_dt_struct(buf, struct_size); + + memmove(buf + strings_off, fdt + fdt_off_dt_strings(fdt), + fdt_size_dt_strings(fdt)); + fdt_set_off_dt_strings(buf, strings_off); + fdt_set_size_dt_strings(buf, fdt_size_dt_strings(fdt)); +} + +int fdt_open_into(const void *fdt, void *buf, int bufsize) +{ + int err; + int mem_rsv_size, struct_size; + int newsize; + void *tmp; + + err = fdt_check_header(fdt); + if (err) + return err; + + mem_rsv_size = (fdt_num_mem_rsv(fdt)+1) + * sizeof(struct fdt_reserve_entry); + + if (fdt_version(fdt) >= 17) { + struct_size = fdt_size_dt_struct(fdt); + } else { + struct_size = 0; + while (fdt_next_tag(fdt, struct_size, &struct_size) != FDT_END) + ; + } + + if (!_blocks_misordered(fdt, mem_rsv_size, struct_size)) { + /* no further work necessary */ + err = fdt_move(fdt, buf, bufsize); + if (err) + return err; + fdt_set_version(buf, 17); + fdt_set_size_dt_struct(buf, struct_size); + fdt_set_totalsize(buf, bufsize); + return 0; + } + + /* Need to reorder */ + newsize = ALIGN(sizeof(struct fdt_header), 8) + mem_rsv_size + + struct_size + fdt_size_dt_strings(fdt); + + if (bufsize < newsize) + return -FDT_ERR_NOSPACE; + + if (((buf + newsize) <= fdt) + || (buf >= (fdt + fdt_totalsize(fdt)))) { + tmp = buf; + } else { + tmp = (void *)fdt + fdt_totalsize(fdt); + if ((tmp + newsize) > (buf + bufsize)) + return -FDT_ERR_NOSPACE; + } + + _packblocks(fdt, tmp, mem_rsv_size, struct_size); + memmove(buf, tmp, newsize); + + fdt_set_magic(buf, FDT_MAGIC); + fdt_set_totalsize(buf, bufsize); + fdt_set_version(buf, 17); + fdt_set_last_comp_version(buf, 16); + fdt_set_boot_cpuid_phys(buf, fdt_boot_cpuid_phys(fdt)); + + return 0; +} + +int fdt_pack(void *fdt) +{ + int mem_rsv_size; + int err; + + err = rw_check_header(fdt); + if (err) + return err; + + mem_rsv_size = (fdt_num_mem_rsv(fdt)+1) + * sizeof(struct fdt_reserve_entry); + _packblocks(fdt, fdt, mem_rsv_size, fdt_size_dt_struct(fdt)); + fdt_set_totalsize(fdt, _blob_data_size(fdt)); + + return 0; +} diff --git a/arch/powerpc/boot/libfdt/fdt_strerror.c b/arch/powerpc/boot/libfdt/fdt_strerror.c new file mode 100644 index 00000000000..f9d32ef5360 --- /dev/null +++ b/arch/powerpc/boot/libfdt/fdt_strerror.c @@ -0,0 +1,96 @@ +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2006 David Gibson, IBM Corporation. + * + * libfdt is dual licensed: you can use it either under the terms of + * the GPL, or the BSD license, at your option. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Alternatively, + * + * b) Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * 1. Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * 2. Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND + * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR + * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#include "libfdt_env.h" + +#include <fdt.h> +#include <libfdt.h> + +#include "libfdt_internal.h" + +struct errtabent { + const char *str; +}; + +#define ERRTABENT(val) \ + [(val)] = { .str = #val, } + +static struct errtabent errtable[] = { + ERRTABENT(FDT_ERR_NOTFOUND), + ERRTABENT(FDT_ERR_EXISTS), + ERRTABENT(FDT_ERR_NOSPACE), + + ERRTABENT(FDT_ERR_BADOFFSET), + ERRTABENT(FDT_ERR_BADPATH), + ERRTABENT(FDT_ERR_BADSTATE), + + ERRTABENT(FDT_ERR_TRUNCATED), + ERRTABENT(FDT_ERR_BADMAGIC), + ERRTABENT(FDT_ERR_BADVERSION), + ERRTABENT(FDT_ERR_BADSTRUCTURE), + ERRTABENT(FDT_ERR_BADLAYOUT), +}; +#define ERRTABSIZE (sizeof(errtable) / sizeof(errtable[0])) + +const char *fdt_strerror(int errval) +{ + if (errval > 0) + return "<valid offset/length>"; + else if (errval == 0) + return "<no error>"; + else if (errval > -ERRTABSIZE) { + const char *s = errtable[-errval].str; + + if (s) + return s; + } + + return "<unknown error>"; +} diff --git a/arch/powerpc/boot/libfdt/fdt_sw.c b/arch/powerpc/boot/libfdt/fdt_sw.c new file mode 100644 index 00000000000..dda2de34b2e --- /dev/null +++ b/arch/powerpc/boot/libfdt/fdt_sw.c @@ -0,0 +1,258 @@ +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2006 David Gibson, IBM Corporation. + * + * libfdt is dual licensed: you can use it either under the terms of + * the GPL, or the BSD license, at your option. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Alternatively, + * + * b) Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * 1. Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * 2. Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND + * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR + * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#include "libfdt_env.h" + +#include <fdt.h> +#include <libfdt.h> + +#include "libfdt_internal.h" + +static int check_header_sw(void *fdt) +{ + if (fdt_magic(fdt) != SW_MAGIC) + return -FDT_ERR_BADMAGIC; + return 0; +} + +static void *grab_space(void *fdt, int len) +{ + int offset = fdt_size_dt_struct(fdt); + int spaceleft; + + spaceleft = fdt_totalsize(fdt) - fdt_off_dt_struct(fdt) + - fdt_size_dt_strings(fdt); + + if ((offset + len < offset) || (offset + len > spaceleft)) + return NULL; + + fdt_set_size_dt_struct(fdt, offset + len); + return fdt_offset_ptr_w(fdt, offset, len); +} + +int fdt_create(void *buf, int bufsize) +{ + void *fdt = buf; + + if (bufsize < sizeof(struct fdt_header)) + return -FDT_ERR_NOSPACE; + + memset(buf, 0, bufsize); + + fdt_set_magic(fdt, SW_MAGIC); + fdt_set_version(fdt, FDT_LAST_SUPPORTED_VERSION); + fdt_set_last_comp_version(fdt, FDT_FIRST_SUPPORTED_VERSION); + fdt_set_totalsize(fdt, bufsize); + + fdt_set_off_mem_rsvmap(fdt, ALIGN(sizeof(struct fdt_header), + sizeof(struct fdt_reserve_entry))); + fdt_set_off_dt_struct(fdt, fdt_off_mem_rsvmap(fdt)); + fdt_set_off_dt_strings(fdt, bufsize); + + return 0; +} + +int fdt_add_reservemap_entry(void *fdt, uint64_t addr, uint64_t size) +{ + struct fdt_reserve_entry *re; + int err = check_header_sw(fdt); + int offset; + + if (err) + return err; + if (fdt_size_dt_struct(fdt)) + return -FDT_ERR_BADSTATE; + + offset = fdt_off_dt_struct(fdt); + if ((offset + sizeof(*re)) > fdt_totalsize(fdt)) + return -FDT_ERR_NOSPACE; + + re = (struct fdt_reserve_entry *)(fdt + offset); + re->address = cpu_to_fdt64(addr); + re->size = cpu_to_fdt64(size); + + fdt_set_off_dt_struct(fdt, offset + sizeof(*re)); + + return 0; +} + +int fdt_finish_reservemap(void *fdt) +{ + return fdt_add_reservemap_entry(fdt, 0, 0); +} + +int fdt_begin_node(void *fdt, const char *name) +{ + struct fdt_node_header *nh; + int err = check_header_sw(fdt); + int namelen = strlen(name) + 1; + + if (err) + return err; + + nh = grab_space(fdt, sizeof(*nh) + ALIGN(namelen, FDT_TAGSIZE)); + if (! nh) + return -FDT_ERR_NOSPACE; + + nh->tag = cpu_to_fdt32(FDT_BEGIN_NODE); + memcpy(nh->name, name, namelen); + return 0; +} + +int fdt_end_node(void *fdt) +{ + uint32_t *en; + int err = check_header_sw(fdt); + + if (err) + return err; + + en = grab_space(fdt, FDT_TAGSIZE); + if (! en) + return -FDT_ERR_NOSPACE; + + *en = cpu_to_fdt32(FDT_END_NODE); + return 0; +} + +static int find_add_string(void *fdt, const char *s) +{ + char *strtab = (char *)fdt + fdt_totalsize(fdt); + const char *p; + int strtabsize = fdt_size_dt_strings(fdt); + int len = strlen(s) + 1; + int struct_top, offset; + + p = _fdt_find_string(strtab - strtabsize, strtabsize, s); + if (p) + return p - strtab; + + /* Add it */ + offset = -strtabsize - len; + struct_top = fdt_off_dt_struct(fdt) + fdt_size_dt_struct(fdt); + if (fdt_totalsize(fdt) + offset < struct_top) + return 0; /* no more room :( */ + + memcpy(strtab + offset, s, len); + fdt_set_size_dt_strings(fdt, strtabsize + len); + return offset; +} + +int fdt_property(void *fdt, const char *name, const void *val, int len) +{ + struct fdt_property *prop; + int err = check_header_sw(fdt); + int nameoff; + + if (err) + return err; + + nameoff = find_add_string(fdt, name); + if (nameoff == 0) + return -FDT_ERR_NOSPACE; + + prop = grab_space(fdt, sizeof(*prop) + ALIGN(len, FDT_TAGSIZE)); + if (! prop) + return -FDT_ERR_NOSPACE; + + prop->tag = cpu_to_fdt32(FDT_PROP); + prop->nameoff = cpu_to_fdt32(nameoff); + prop->len = cpu_to_fdt32(len); + memcpy(prop->data, val, len); + return 0; +} + +int fdt_finish(void *fdt) +{ + int err = check_header_sw(fdt); + char *p = (char *)fdt; + uint32_t *end; + int oldstroffset, newstroffset; + uint32_t tag; + int offset, nextoffset; + + if (err) + return err; + + /* Add terminator */ + end = grab_space(fdt, sizeof(*end)); + if (! end) + return -FDT_ERR_NOSPACE; + *end = cpu_to_fdt32(FDT_END); + + /* Relocate the string table */ + oldstroffset = fdt_totalsize(fdt) - fdt_size_dt_strings(fdt); + newstroffset = fdt_off_dt_struct(fdt) + fdt_size_dt_struct(fdt); + memmove(p + newstroffset, p + oldstroffset, fdt_size_dt_strings(fdt)); + fdt_set_off_dt_strings(fdt, newstroffset); + + /* Walk the structure, correcting string offsets */ + offset = 0; + while ((tag = fdt_next_tag(fdt, offset, &nextoffset)) != FDT_END) { + if (tag == FDT_PROP) { + struct fdt_property *prop = + fdt_offset_ptr_w(fdt, offset, sizeof(*prop)); + int nameoff; + + if (! prop) + return -FDT_ERR_BADSTRUCTURE; + + nameoff = fdt32_to_cpu(prop->nameoff); + nameoff += fdt_size_dt_strings(fdt); + prop->nameoff = cpu_to_fdt32(nameoff); + } + offset = nextoffset; + } + + /* Finally, adjust the header */ + fdt_set_totalsize(fdt, newstroffset + fdt_size_dt_strings(fdt)); + fdt_set_magic(fdt, FDT_MAGIC); + return 0; +} diff --git a/arch/powerpc/boot/libfdt/fdt_wip.c b/arch/powerpc/boot/libfdt/fdt_wip.c new file mode 100644 index 00000000000..88e24b8318f --- /dev/null +++ b/arch/powerpc/boot/libfdt/fdt_wip.c @@ -0,0 +1,144 @@ +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2006 David Gibson, IBM Corporation. + * + * libfdt is dual licensed: you can use it either under the terms of + * the GPL, or the BSD license, at your option. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Alternatively, + * + * b) Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * 1. Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * 2. Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND + * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR + * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#include "libfdt_env.h" + +#include <fdt.h> +#include <libfdt.h> + +#include "libfdt_internal.h" + +int fdt_setprop_inplace(void *fdt, int nodeoffset, const char *name, + const void *val, int len) +{ + void *propval; + int proplen; + + propval = fdt_getprop_w(fdt, nodeoffset, name, &proplen); + if (! propval) + return proplen; + + if (proplen != len) + return -FDT_ERR_NOSPACE; + + memcpy(propval, val, len); + return 0; +} + +static void nop_region(void *start, int len) +{ + uint32_t *p; + + for (p = start; (void *)p < (start + len); p++) + *p = cpu_to_fdt32(FDT_NOP); +} + +int fdt_nop_property(void *fdt, int nodeoffset, const char *name) +{ + struct fdt_property *prop; + int len; + + prop = fdt_get_property_w(fdt, nodeoffset, name, &len); + if (! prop) + return len; + + nop_region(prop, len + sizeof(*prop)); + + return 0; +} + +int _fdt_node_end_offset(void *fdt, int nodeoffset) +{ + int level = 0; + uint32_t tag; + int offset, nextoffset; + + tag = fdt_next_tag(fdt, nodeoffset, &nextoffset); + if (tag != FDT_BEGIN_NODE) + return -FDT_ERR_BADOFFSET; + do { + offset = nextoffset; + tag = fdt_next_tag(fdt, offset, &nextoffset); + + switch (tag) { + case FDT_END: + return offset; + + case FDT_BEGIN_NODE: + level++; + break; + + case FDT_END_NODE: + level--; + break; + + case FDT_PROP: + case FDT_NOP: + break; + + default: + return -FDT_ERR_BADSTRUCTURE; + } + } while (level >= 0); + + return nextoffset; +} + +int fdt_nop_node(void *fdt, int nodeoffset) +{ + int endoffset; + + endoffset = _fdt_node_end_offset(fdt, nodeoffset); + if (endoffset < 0) + return endoffset; + + nop_region(fdt_offset_ptr_w(fdt, nodeoffset, 0), endoffset - nodeoffset); + return 0; +} diff --git a/arch/powerpc/boot/libfdt/libfdt.h b/arch/powerpc/boot/libfdt/libfdt.h new file mode 100644 index 00000000000..6b2fb92ea35 --- /dev/null +++ b/arch/powerpc/boot/libfdt/libfdt.h @@ -0,0 +1,721 @@ +#ifndef _LIBFDT_H +#define _LIBFDT_H +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2006 David Gibson, IBM Corporation. + * + * libfdt is dual licensed: you can use it either under the terms of + * the GPL, or the BSD license, at your option. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Alternatively, + * + * b) Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * 1. Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * 2. Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND + * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR + * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <libfdt_env.h> +#include <fdt.h> + +#define FDT_FIRST_SUPPORTED_VERSION 0x10 +#define FDT_LAST_SUPPORTED_VERSION 0x11 + +/* Error codes: informative error codes */ +#define FDT_ERR_NOTFOUND 1 + /* FDT_ERR_NOTFOUND: The requested node or property does not exist */ +#define FDT_ERR_EXISTS 2 + /* FDT_ERR_EXISTS: Attemped to create a node or property which + * already exists */ +#define FDT_ERR_NOSPACE 3 + /* FDT_ERR_NOSPACE: Operation needed to expand the device + * tree, but its buffer did not have sufficient space to + * contain the expanded tree. Use fdt_open_into() to move the + * device tree to a buffer with more space. */ + +/* Error codes: codes for bad parameters */ +#define FDT_ERR_BADOFFSET 4 + /* FDT_ERR_BADOFFSET: Function was passed a structure block + * offset which is out-of-bounds, or which points to an + * unsuitable part of the structure for the operation. */ +#define FDT_ERR_BADPATH 5 + /* FDT_ERR_BADPATH: Function was passed a badly formatted path + * (e.g. missing a leading / for a function which requires an + * absolute path) */ +#define FDT_ERR_BADPHANDLE 6 + /* FDT_ERR_BADPHANDLE: Function was passed an invalid phandle + * value. phandle values of 0 and -1 are not permitted. */ +#define FDT_ERR_BADSTATE 7 + /* FDT_ERR_BADSTATE: Function was passed an incomplete device + * tree created by the sequential-write functions, which is + * not sufficiently complete for the requested operation. */ + +/* Error codes: codes for bad device tree blobs */ +#define FDT_ERR_TRUNCATED 8 + /* FDT_ERR_TRUNCATED: Structure block of the given device tree + * ends without an FDT_END tag. */ +#define FDT_ERR_BADMAGIC 9 + /* FDT_ERR_BADMAGIC: Given "device tree" appears not to be a + * device tree at all - it is missing the flattened device + * tree magic number. */ +#define FDT_ERR_BADVERSION 10 + /* FDT_ERR_BADVERSION: Given device tree has a version which + * can't be handled by the requested operation. For + * read-write functions, this may mean that fdt_open_into() is + * required to convert the tree to the expected version. */ +#define FDT_ERR_BADSTRUCTURE 11 + /* FDT_ERR_BADSTRUCTURE: Given device tree has a corrupt + * structure block or other serious error (e.g. misnested + * nodes, or subnodes preceding properties). */ +#define FDT_ERR_BADLAYOUT 12 + /* FDT_ERR_BADLAYOUT: For read-write functions, the given + * device tree has it's sub-blocks in an order that the + * function can't handle (memory reserve map, then structure, + * then strings). Use fdt_open_into() to reorganize the tree + * into a form suitable for the read-write operations. */ + +/* "Can't happen" error indicating a bug in libfdt */ +#define FDT_ERR_INTERNAL 13 + /* FDT_ERR_INTERNAL: libfdt has failed an internal assertion. + * Should never be returned, if it is, it indicates a bug in + * libfdt itself. */ + +#define FDT_ERR_MAX 13 + +/**********************************************************************/ +/* Low-level functions (you probably don't need these) */ +/**********************************************************************/ + +const void *fdt_offset_ptr(const void *fdt, int offset, int checklen); +static inline void *fdt_offset_ptr_w(void *fdt, int offset, int checklen) +{ + return (void *)fdt_offset_ptr(fdt, offset, checklen); +} + +uint32_t fdt_next_tag(const void *fdt, int offset, int *nextoffset); + +/**********************************************************************/ +/* General functions */ +/**********************************************************************/ + +#define fdt_get_header(fdt, field) \ + (fdt32_to_cpu(((const struct fdt_header *)(fdt))->field)) +#define fdt_magic(fdt) (fdt_get_header(fdt, magic)) +#define fdt_totalsize(fdt) (fdt_get_header(fdt, totalsize)) +#define fdt_off_dt_struct(fdt) (fdt_get_header(fdt, off_dt_struct)) +#define fdt_off_dt_strings(fdt) (fdt_get_header(fdt, off_dt_strings)) +#define fdt_off_mem_rsvmap(fdt) (fdt_get_header(fdt, off_mem_rsvmap)) +#define fdt_version(fdt) (fdt_get_header(fdt, version)) +#define fdt_last_comp_version(fdt) (fdt_get_header(fdt, last_comp_version)) +#define fdt_boot_cpuid_phys(fdt) (fdt_get_header(fdt, boot_cpuid_phys)) +#define fdt_size_dt_strings(fdt) (fdt_get_header(fdt, size_dt_strings)) +#define fdt_size_dt_struct(fdt) (fdt_get_header(fdt, size_dt_struct)) + +#define __fdt_set_hdr(name) \ + static inline void fdt_set_##name(void *fdt, uint32_t val) \ + { \ + struct fdt_header *fdth = fdt; \ + fdth->name = cpu_to_fdt32(val); \ + } +__fdt_set_hdr(magic); +__fdt_set_hdr(totalsize); +__fdt_set_hdr(off_dt_struct); +__fdt_set_hdr(off_dt_strings); +__fdt_set_hdr(off_mem_rsvmap); +__fdt_set_hdr(version); +__fdt_set_hdr(last_comp_version); +__fdt_set_hdr(boot_cpuid_phys); +__fdt_set_hdr(size_dt_strings); +__fdt_set_hdr(size_dt_struct); +#undef __fdt_set_hdr + +/** + * fdt_check_header - sanity check a device tree or possible device tree + * @fdt: pointer to data which might be a flattened device tree + * + * fdt_check_header() checks that the given buffer contains what + * appears to be a flattened device tree with sane information in its + * header. + * + * returns: + * 0, if the buffer appears to contain a valid device tree + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, standard meanings, as above + */ +int fdt_check_header(const void *fdt); + +/** + * fdt_move - move a device tree around in memory + * @fdt: pointer to the device tree to move + * @buf: pointer to memory where the device is to be moved + * @bufsize: size of the memory space at buf + * + * fdt_move() relocates, if possible, the device tree blob located at + * fdt to the buffer at buf of size bufsize. The buffer may overlap + * with the existing device tree blob at fdt. Therefore, + * fdt_move(fdt, fdt, fdt_totalsize(fdt)) + * should always succeed. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, bufsize is insufficient to contain the device tree + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, standard meanings + */ +int fdt_move(const void *fdt, void *buf, int bufsize); + +/**********************************************************************/ +/* Read-only functions */ +/**********************************************************************/ + +/** + * fdt_string - retreive a string from the strings block of a device tree + * @fdt: pointer to the device tree blob + * @stroffset: offset of the string within the strings block (native endian) + * + * fdt_string() retrieves a pointer to a single string from the + * strings block of the device tree blob at fdt. + * + * returns: + * a pointer to the string, on success + * NULL, if stroffset is out of bounds + */ +const char *fdt_string(const void *fdt, int stroffset); + +/** + * fdt_num_mem_rsv - retreive the number of memory reserve map entries + * @fdt: pointer to the device tree blob + * + * Returns the number of entries in the device tree blob's memory + * reservation map. This does not include the terminating 0,0 entry + * or any other (0,0) entries reserved for expansion. + * + * returns: + * the number of entries + */ +int fdt_num_mem_rsv(const void *fdt); + +/** + * fdt_get_mem_rsv - retreive one memory reserve map entry + * @fdt: pointer to the device tree blob + * @address, @size: pointers to 64-bit variables + * + * On success, *address and *size will contain the address and size of + * the n-th reserve map entry from the device tree blob, in + * native-endian format. + * + * returns: + * 0, on success + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, standard meanings + */ +int fdt_get_mem_rsv(const void *fdt, int n, uint64_t *address, uint64_t *size); + +/** + * fdt_subnode_offset_namelen - find a subnode based on substring + * @fdt: pointer to the device tree blob + * @parentoffset: structure block offset of a node + * @name: name of the subnode to locate + * @namelen: number of characters of name to consider + * + * Identical to fdt_subnode_offset(), but only examine the first + * namelen characters of name for matching the subnode name. This is + * useful for finding subnodes based on a portion of a larger string, + * such as a full path. + */ +int fdt_subnode_offset_namelen(const void *fdt, int parentoffset, + const char *name, int namelen); +/** + * fdt_subnode_offset - find a subnode of a given node + * @fdt: pointer to the device tree blob + * @parentoffset: structure block offset of a node + * @name: name of the subnode to locate + * + * fdt_subnode_offset() finds a subnode of the node at structure block + * offset parentoffset with the given name. name may include a unit + * address, in which case fdt_subnode_offset() will find the subnode + * with that unit address, or the unit address may be omitted, in + * which case fdt_subnode_offset() will find an arbitrary subnode + * whose name excluding unit address matches the given name. + * + * returns: + * structure block offset of the requested subnode (>=0), on success + * -FDT_ERR_NOTFOUND, if the requested subnode does not exist + * -FDT_ERR_BADOFFSET, if parentoffset did not point to an FDT_BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings. + */ +int fdt_subnode_offset(const void *fdt, int parentoffset, const char *name); + +/** + * fdt_path_offset - find a tree node by its full path + * @fdt: pointer to the device tree blob + * @path: full path of the node to locate + * + * fdt_path_offset() finds a node of a given path in the device tree. + * Each path component may omit the unit address portion, but the + * results of this are undefined if any such path component is + * ambiguous (that is if there are multiple nodes at the relevant + * level matching the given component, differentiated only by unit + * address). + * + * returns: + * structure block offset of the node with the requested path (>=0), on success + * -FDT_ERR_BADPATH, given path does not begin with '/' or is invalid + * -FDT_ERR_NOTFOUND, if the requested node does not exist + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings. + */ +int fdt_path_offset(const void *fdt, const char *path); + +/** + * fdt_get_name - retreive the name of a given node + * @fdt: pointer to the device tree blob + * @nodeoffset: structure block offset of the starting node + * @lenp: pointer to an integer variable (will be overwritten) or NULL + * + * fdt_get_name() retrieves the name (including unit address) of the + * device tree node at structure block offset nodeoffset. If lenp is + * non-NULL, the length of this name is also returned, in the integer + * pointed to by lenp. + * + * returns: + * pointer to the node's name, on success + * If lenp is non-NULL, *lenp contains the length of that name (>=0) + * NULL, on error + * if lenp is non-NULL *lenp contains an error code (<0): + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, standard meanings + */ +const char *fdt_get_name(const void *fdt, int nodeoffset, int *lenp); + +/** + * fdt_get_property - find a given property in a given node + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to find + * @name: name of the property to find + * @lenp: pointer to an integer variable (will be overwritten) or NULL + * + * fdt_get_property() retrieves a pointer to the fdt_property + * structure within the device tree blob corresponding to the property + * named 'name' of the node at offset nodeoffset. If lenp is + * non-NULL, the length of the property value also returned, in the + * integer pointed to by lenp. + * + * returns: + * pointer to the structure representing the property + * if lenp is non-NULL, *lenp contains the length of the property + * value (>=0) + * NULL, on error + * if lenp is non-NULL, *lenp contains an error code (<0): + * -FDT_ERR_NOTFOUND, node does not have named property + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +const struct fdt_property *fdt_get_property(const void *fdt, int nodeoffset, + const char *name, int *lenp); +static inline struct fdt_property *fdt_get_property_w(void *fdt, int nodeoffset, + const char *name, + int *lenp) +{ + return (struct fdt_property *)fdt_get_property(fdt, nodeoffset, + name, lenp); +} + +/** + * fdt_getprop - retrieve the value of a given property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to find + * @name: name of the property to find + * @lenp: pointer to an integer variable (will be overwritten) or NULL + * + * fdt_getprop() retrieves a pointer to the value of the property + * named 'name' of the node at offset nodeoffset (this will be a + * pointer to within the device blob itself, not a copy of the value). + * If lenp is non-NULL, the length of the property value also + * returned, in the integer pointed to by lenp. + * + * returns: + * pointer to the property's value + * if lenp is non-NULL, *lenp contains the length of the property + * value (>=0) + * NULL, on error + * if lenp is non-NULL, *lenp contains an error code (<0): + * -FDT_ERR_NOTFOUND, node does not have named property + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +const void *fdt_getprop(const void *fdt, int nodeoffset, + const char *name, int *lenp); +static inline void *fdt_getprop_w(void *fdt, int nodeoffset, + const char *name, int *lenp) +{ + return (void *)fdt_getprop(fdt, nodeoffset, name, lenp); +} + +/** + * fdt_get_phandle - retreive the phandle of a given node + * @fdt: pointer to the device tree blob + * @nodeoffset: structure block offset of the node + * + * fdt_get_phandle() retrieves the phandle of the device tree node at + * structure block offset nodeoffset. + * + * returns: + * the phandle of the node at nodeoffset, on succes (!= 0, != -1) + * 0, if the node has no phandle, or another error occurs + */ +uint32_t fdt_get_phandle(const void *fdt, int nodeoffset); + +/** + * fdt_get_path - determine the full path of a node + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose path to find + * @buf: character buffer to contain the returned path (will be overwritten) + * @buflen: size of the character buffer at buf + * + * fdt_get_path() computes the full path of the node at offset + * nodeoffset, and records that path in the buffer at buf. + * + * NOTE: This function is expensive, as it must scan the device tree + * structure from the start to nodeoffset. + * + * returns: + * 0, on success + * buf contains the absolute path of the node at + * nodeoffset, as a NUL-terminated string. + * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag + * -FDT_ERR_NOSPACE, the path of the given node is longer than (bufsize-1) + * characters and will not fit in the given buffer. + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_get_path(const void *fdt, int nodeoffset, char *buf, int buflen); + +/** + * fdt_supernode_atdepth_offset - find a specific ancestor of a node + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose parent to find + * @supernodedepth: depth of the ancestor to find + * @nodedepth: pointer to an integer variable (will be overwritten) or NULL + * + * fdt_supernode_atdepth_offset() finds an ancestor of the given node + * at a specific depth from the root (where the root itself has depth + * 0, its immediate subnodes depth 1 and so forth). So + * fdt_supernode_atdepth_offset(fdt, nodeoffset, 0, NULL); + * will always return 0, the offset of the root node. If the node at + * nodeoffset has depth D, then: + * fdt_supernode_atdepth_offset(fdt, nodeoffset, D, NULL); + * will return nodeoffset itself. + * + * NOTE: This function is expensive, as it must scan the device tree + * structure from the start to nodeoffset. + * + * returns: + + * structure block offset of the node at node offset's ancestor + * of depth supernodedepth (>=0), on success + * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag +* -FDT_ERR_NOTFOUND, supernodedepth was greater than the depth of nodeoffset + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_supernode_atdepth_offset(const void *fdt, int nodeoffset, + int supernodedepth, int *nodedepth); + +/** + * fdt_node_depth - find the depth of a given node + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose parent to find + * + * fdt_node_depth() finds the depth of a given node. The root node + * has depth 0, its immediate subnodes depth 1 and so forth. + * + * NOTE: This function is expensive, as it must scan the device tree + * structure from the start to nodeoffset. + * + * returns: + * depth of the node at nodeoffset (>=0), on success + * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_node_depth(const void *fdt, int nodeoffset); + +/** + * fdt_parent_offset - find the parent of a given node + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose parent to find + * + * fdt_parent_offset() locates the parent node of a given node (that + * is, it finds the offset of the node which contains the node at + * nodeoffset as a subnode). + * + * NOTE: This function is expensive, as it must scan the device tree + * structure from the start to nodeoffset, *twice*. + * + * returns: + * stucture block offset of the parent of the node at nodeoffset + * (>=0), on success + * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_parent_offset(const void *fdt, int nodeoffset); + +/** + * fdt_node_offset_by_prop_value - find nodes with a given property value + * @fdt: pointer to the device tree blob + * @startoffset: only find nodes after this offset + * @propname: property name to check + * @propval: property value to search for + * @proplen: length of the value in propval + * + * fdt_node_offset_by_prop_value() returns the offset of the first + * node after startoffset, which has a property named propname whose + * value is of length proplen and has value equal to propval; or if + * startoffset is -1, the very first such node in the tree. + * + * To iterate through all nodes matching the criterion, the following + * idiom can be used: + * offset = fdt_node_offset_by_prop_value(fdt, -1, propname, + * propval, proplen); + * while (offset != -FDT_ERR_NOTFOUND) { + * // other code here + * offset = fdt_node_offset_by_prop_value(fdt, offset, propname, + * propval, proplen); + * } + * + * Note the -1 in the first call to the function, if 0 is used here + * instead, the function will never locate the root node, even if it + * matches the criterion. + * + * returns: + * structure block offset of the located node (>= 0, >startoffset), + * on success + * -FDT_ERR_NOTFOUND, no node matching the criterion exists in the + * tree after startoffset + * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_node_offset_by_prop_value(const void *fdt, int startoffset, + const char *propname, + const void *propval, int proplen); + +/** + * fdt_node_offset_by_phandle - find the node with a given phandle + * @fdt: pointer to the device tree blob + * @phandle: phandle value + * + * fdt_node_offset_by_prop_value() returns the offset of the node + * which has the given phandle value. If there is more than one node + * in the tree with the given phandle (an invalid tree), results are + * undefined. + * + * returns: + * structure block offset of the located node (>= 0), on success + * -FDT_ERR_NOTFOUND, no node with that phandle exists + * -FDT_ERR_BADPHANDLE, given phandle value was invalid (0 or -1) + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_node_offset_by_phandle(const void *fdt, uint32_t phandle); + +/** + * fdt_node_check_compatible: check a node's compatible property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of a tree node + * @compatible: string to match against + * + * + * fdt_node_check_compatible() returns 0 if the given node contains a + * 'compatible' property with the given string as one of its elements, + * it returns non-zero otherwise, or on error. + * + * returns: + * 0, if the node has a 'compatible' property listing the given string + * 1, if the node has a 'compatible' property, but it does not list + * the given string + * -FDT_ERR_NOTFOUND, if the given node has no 'compatible' property + * -FDT_ERR_BADOFFSET, if nodeoffset does not refer to a BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_node_check_compatible(const void *fdt, int nodeoffset, + const char *compatible); + +/** + * fdt_node_offset_by_compatible - find nodes with a given 'compatible' value + * @fdt: pointer to the device tree blob + * @startoffset: only find nodes after this offset + * @compatible: 'compatible' string to match against + * + * fdt_node_offset_by_compatible() returns the offset of the first + * node after startoffset, which has a 'compatible' property which + * lists the given compatible string; or if startoffset is -1, the + * very first such node in the tree. + * + * To iterate through all nodes matching the criterion, the following + * idiom can be used: + * offset = fdt_node_offset_by_compatible(fdt, -1, compatible); + * while (offset != -FDT_ERR_NOTFOUND) { + * // other code here + * offset = fdt_node_offset_by_compatible(fdt, offset, compatible); + * } + * + * Note the -1 in the first call to the function, if 0 is used here + * instead, the function will never locate the root node, even if it + * matches the criterion. + * + * returns: + * structure block offset of the located node (>= 0, >startoffset), + * on success + * -FDT_ERR_NOTFOUND, no node matching the criterion exists in the + * tree after startoffset + * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_node_offset_by_compatible(const void *fdt, int startoffset, + const char *compatible); + +/**********************************************************************/ +/* Write-in-place functions */ +/**********************************************************************/ + +int fdt_setprop_inplace(void *fdt, int nodeoffset, const char *name, + const void *val, int len); +static inline int fdt_setprop_inplace_cell(void *fdt, int nodeoffset, + const char *name, uint32_t val) +{ + val = cpu_to_fdt32(val); + return fdt_setprop_inplace(fdt, nodeoffset, name, &val, sizeof(val)); +} + +int fdt_nop_property(void *fdt, int nodeoffset, const char *name); +int fdt_nop_node(void *fdt, int nodeoffset); + +/**********************************************************************/ +/* Sequential write functions */ +/**********************************************************************/ + +int fdt_create(void *buf, int bufsize); +int fdt_add_reservemap_entry(void *fdt, uint64_t addr, uint64_t size); +int fdt_finish_reservemap(void *fdt); +int fdt_begin_node(void *fdt, const char *name); +int fdt_property(void *fdt, const char *name, const void *val, int len); +static inline int fdt_property_cell(void *fdt, const char *name, uint32_t val) +{ + val = cpu_to_fdt32(val); + return fdt_property(fdt, name, &val, sizeof(val)); +} +#define fdt_property_string(fdt, name, str) \ + fdt_property(fdt, name, str, strlen(str)+1) +int fdt_end_node(void *fdt); +int fdt_finish(void *fdt); + +/**********************************************************************/ +/* Read-write functions */ +/**********************************************************************/ + +int fdt_open_into(const void *fdt, void *buf, int bufsize); +int fdt_pack(void *fdt); + +int fdt_add_mem_rsv(void *fdt, uint64_t address, uint64_t size); +int fdt_del_mem_rsv(void *fdt, int n); + +int fdt_setprop(void *fdt, int nodeoffset, const char *name, + const void *val, int len); +static inline int fdt_setprop_cell(void *fdt, int nodeoffset, const char *name, + uint32_t val) +{ + val = cpu_to_fdt32(val); + return fdt_setprop(fdt, nodeoffset, name, &val, sizeof(val)); +} +#define fdt_setprop_string(fdt, nodeoffset, name, str) \ + fdt_setprop((fdt), (nodeoffset), (name), (str), strlen(str)+1) +int fdt_delprop(void *fdt, int nodeoffset, const char *name); +int fdt_add_subnode_namelen(void *fdt, int parentoffset, + const char *name, int namelen); +int fdt_add_subnode(void *fdt, int parentoffset, const char *name); +int fdt_del_node(void *fdt, int nodeoffset); + +/**********************************************************************/ +/* Debugging / informational functions */ +/**********************************************************************/ + +const char *fdt_strerror(int errval); + +#endif /* _LIBFDT_H */ diff --git a/arch/powerpc/boot/libfdt/libfdt_internal.h b/arch/powerpc/boot/libfdt/libfdt_internal.h new file mode 100644 index 00000000000..1e60936beb5 --- /dev/null +++ b/arch/powerpc/boot/libfdt/libfdt_internal.h @@ -0,0 +1,89 @@ +#ifndef _LIBFDT_INTERNAL_H +#define _LIBFDT_INTERNAL_H +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2006 David Gibson, IBM Corporation. + * + * libfdt is dual licensed: you can use it either under the terms of + * the GPL, or the BSD license, at your option. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Alternatively, + * + * b) Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * 1. Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * 2. Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND + * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR + * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#include <fdt.h> + +#define ALIGN(x, a) (((x) + (a) - 1) & ~((a) - 1)) +#define PALIGN(p, a) ((void *)ALIGN((unsigned long)(p), (a))) + +#define memeq(p, q, n) (memcmp((p), (q), (n)) == 0) +#define streq(p, q) (strcmp((p), (q)) == 0) + +uint32_t _fdt_next_tag(const void *fdt, int startoffset, int *nextoffset); +const char *_fdt_find_string(const char *strtab, int tabsize, const char *s); +int _fdt_node_end_offset(void *fdt, int nodeoffset); + +static inline const void *_fdt_offset_ptr(const void *fdt, int offset) +{ + return fdt + fdt_off_dt_struct(fdt) + offset; +} + +static inline void *_fdt_offset_ptr_w(void *fdt, int offset) +{ + return (void *)_fdt_offset_ptr(fdt, offset); +} + +static inline const struct fdt_reserve_entry *_fdt_mem_rsv(const void *fdt, int n) +{ + const struct fdt_reserve_entry *rsv_table = + fdt + fdt_off_mem_rsvmap(fdt); + + return rsv_table + n; +} +static inline struct fdt_reserve_entry *_fdt_mem_rsv_w(void *fdt, int n) +{ + return (void *)_fdt_mem_rsv(fdt, n); +} + +#define SW_MAGIC (~FDT_MAGIC) + +#endif /* _LIBFDT_INTERNAL_H */ diff --git a/arch/powerpc/boot/libfdt_env.h b/arch/powerpc/boot/libfdt_env.h new file mode 100644 index 00000000000..a4b0fc959ec --- /dev/null +++ b/arch/powerpc/boot/libfdt_env.h @@ -0,0 +1,17 @@ +#ifndef _ARCH_POWERPC_BOOT_LIBFDT_ENV_H +#define _ARCH_POWERPC_BOOT_LIBFDT_ENV_H + +#include <types.h> +#include <string.h> + +typedef u32 uint32_t; +typedef u64 uint64_t; + +#define fdt16_to_cpu(x) (x) +#define cpu_to_fdt16(x) (x) +#define fdt32_to_cpu(x) (x) +#define cpu_to_fdt32(x) (x) +#define fdt64_to_cpu(x) (x) +#define cpu_to_fdt64(x) (x) + +#endif /* _ARCH_POWERPC_BOOT_LIBFDT_ENV_H */ diff --git a/arch/powerpc/boot/main.c b/arch/powerpc/boot/main.c index 1b496b37eca..9e7f3ddd991 100644 --- a/arch/powerpc/boot/main.c +++ b/arch/powerpc/boot/main.c @@ -16,7 +16,6 @@ #include "stdio.h" #include "ops.h" #include "gunzip_util.h" -#include "flatdevtree.h" #include "reg.h" static struct gunzip_state gzstate; diff --git a/arch/powerpc/boot/ops.h b/arch/powerpc/boot/ops.h index a180b6505f4..4b0544b03c6 100644 --- a/arch/powerpc/boot/ops.h +++ b/arch/powerpc/boot/ops.h @@ -46,6 +46,8 @@ struct dt_ops { void *(*find_node_by_prop_value)(const void *prev, const char *propname, const char *propval, int proplen); + void *(*find_node_by_compatible)(const void *prev, + const char *compat); unsigned long (*finalize)(void); char *(*get_path)(const void *phandle, char *buf, int len); }; @@ -79,7 +81,7 @@ struct loader_info { extern struct loader_info loader_info; void start(void); -int ft_init(void *dt_blob, unsigned int max_size, unsigned int max_find_device); +void fdt_init(void *blob); int serial_console_init(void); int ns16550_console_init(void *devp, struct serial_console_data *scdp); int mpsc_console_init(void *devp, struct serial_console_data *scdp); @@ -159,9 +161,32 @@ static inline void *find_node_by_devtype(const void *prev, return find_node_by_prop_value_str(prev, "device_type", type); } +static inline void *find_node_by_alias(const char *alias) +{ + void *devp = finddevice("/aliases"); + + if (devp) { + char path[MAX_PATH_LEN]; + if (getprop(devp, alias, path, MAX_PATH_LEN) > 0) + return finddevice(path); + } + + return NULL; +} + +static inline void *find_node_by_compatible(const void *prev, + const char *compat) +{ + if (dt_ops.find_node_by_compatible) + return dt_ops.find_node_by_compatible(prev, compat); + + return NULL; +} + void dt_fixup_memory(u64 start, u64 size); void dt_fixup_cpu_clocks(u32 cpufreq, u32 tbfreq, u32 busfreq); void dt_fixup_clock(const char *path, u32 freq); +void dt_fixup_mac_address_by_alias(const char *alias, const u8 *addr); void dt_fixup_mac_address(u32 index, const u8 *addr); void __dt_fixup_mac_addresses(u32 startindex, ...); #define dt_fixup_mac_addresses(...) \ diff --git a/arch/powerpc/boot/prpmc2800.c b/arch/powerpc/boot/prpmc2800.c index 9614e1db9da..05c3245b30d 100644 --- a/arch/powerpc/boot/prpmc2800.c +++ b/arch/powerpc/boot/prpmc2800.c @@ -547,8 +547,7 @@ void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, if (!dtb) exit(); memmove(dtb, _dtb_start, dt_size); - if (ft_init(dtb, dt_size, 16)) - exit(); + fdt_init(dtb); bridge_base = mv64x60_get_bridge_base(); diff --git a/arch/powerpc/boot/ps3.c b/arch/powerpc/boot/ps3.c index d6661151b49..3b0ac4d006e 100644 --- a/arch/powerpc/boot/ps3.c +++ b/arch/powerpc/boot/ps3.c @@ -131,7 +131,7 @@ void platform_init(void) printf("\n-- PS3 bootwrapper --\n"); simple_alloc_init(_end, heapsize, 32, 64); - ft_init(_dtb_start, 0, 4); + fdt_init(_dtb_start); chosen = finddevice("/chosen"); diff --git a/arch/powerpc/boot/redboot-8xx.c b/arch/powerpc/boot/redboot-8xx.c new file mode 100644 index 00000000000..f7945adc800 --- /dev/null +++ b/arch/powerpc/boot/redboot-8xx.c @@ -0,0 +1,58 @@ +/* + * RedBoot firmware support + * + * Author: Scott Wood <scottwood@freescale.com> + * + * Copyright (c) 2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include "ops.h" +#include "stdio.h" +#include "redboot.h" +#include "fsl-soc.h" +#include "io.h" + +static bd_t bd; +BSS_STACK(4096); + +#define MHZ(x) ((x + 500000) / 1000000) + +static void platform_fixups(void) +{ + void *node; + + dt_fixup_memory(bd.bi_memstart, bd.bi_memsize); + dt_fixup_mac_addresses(bd.bi_enetaddr); + dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 16, bd.bi_busfreq); + + node = finddevice("/soc/cpm/brg"); + if (node) { + printf("BRG clock-frequency <- 0x%x (%dMHz)\r\n", + bd.bi_busfreq, MHZ(bd.bi_busfreq)); + setprop(node, "clock-frequency", &bd.bi_busfreq, 4); + } +} + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + memcpy(&bd, (char *)r3, sizeof(bd)); + + if (bd.bi_tag != 0x42444944) + return; + + simple_alloc_init(_end, + bd.bi_memstart + bd.bi_memsize - (unsigned long)_end, + 32, 64); + + fdt_init(_dtb_start); + serial_console_init(); + platform_ops.fixups = platform_fixups; + + loader_info.cmdline = (char *)bd.bi_cmdline; + loader_info.cmdline_len = strlen((char *)bd.bi_cmdline); +} diff --git a/arch/powerpc/boot/redboot.h b/arch/powerpc/boot/redboot.h new file mode 100644 index 00000000000..ace0b7fed8e --- /dev/null +++ b/arch/powerpc/boot/redboot.h @@ -0,0 +1,56 @@ +#ifndef _PPC_REDBOOT_H +#define _PPC_REDBOOT_H + +//========================================================================= +// include/asm-ppc/redboot.h +// Copyright (c) 2002, 2003 Gary Thomas (<gary@mlbassoc.com> +// Copyright (c) 1997 Dan Malek (dmalek@jlc.net) + +// +// Board specific details, as provided by RedBoot +// + +/* A Board Information structure that is given to a program when + * RedBoot starts it up. Note: not all fields make sense for all + * architectures and it's up to the platform specific code to fill + * in the details. + */ +typedef struct bd_info { + unsigned int bi_tag; /* Should be 0x42444944 "BDID" */ + unsigned int bi_size; /* Size of this structure */ + unsigned int bi_revision; /* revision of this structure */ + unsigned int bi_bdate; /* bootstrap date, i.e. 0x19971106 */ + unsigned int bi_memstart; /* Memory start address */ + unsigned int bi_memsize; /* Memory (end) size in bytes */ + unsigned int bi_intfreq; /* Internal Freq, in Hz */ + unsigned int bi_busfreq; /* Bus Freq, in Hz */ + unsigned int bi_cpmfreq; /* CPM Freq, in Hz */ + unsigned int bi_brgfreq; /* BRG Freq, in Hz */ + unsigned int bi_vco; /* VCO Out from PLL */ + unsigned int bi_pci_freq; /* PCI Freq, in Hz */ + unsigned int bi_baudrate; /* Default console baud rate */ + unsigned int bi_immr; /* IMMR when called from boot rom */ + unsigned char bi_enetaddr[6]; + unsigned int bi_flashbase; /* Physical address of FLASH memory */ + unsigned int bi_flashsize; /* Length of FLASH memory */ + int bi_flashwidth; /* Width (8,16,32,64) */ + unsigned char *bi_cmdline; /* Pointer to command line */ + unsigned char bi_esa[3][6]; /* Ethernet station addresses */ + unsigned int bi_ramdisk_begin, bi_ramdisk_end; + struct { /* Information about [main] video screen */ + short x_res; /* Horizontal resolution in pixels */ + short y_res; /* Vertical resolution in pixels */ + short bpp; /* Bits/pixel */ + short mode; /* Type of pixels (packed, indexed) */ + unsigned long fb; /* Pointer to frame buffer (pixel) memory */ + } bi_video; + void (*bi_cputc)(char); /* Write a character to the RedBoot console */ + char (*bi_cgetc)(void); /* Read a character from the RedBoot console */ + int (*bi_ctstc)(void); /* Test for input on the RedBoot console */ +} bd_t; + +#define BI_REV 0x0102 /* Version 1.02 */ + +#define bi_pci_busfreq bi_pci_freq +#define bi_immr_base bi_immr +#endif diff --git a/arch/powerpc/boot/reg.h b/arch/powerpc/boot/reg.h index d3cd9ee98af..9c2c9978e0e 100644 --- a/arch/powerpc/boot/reg.h +++ b/arch/powerpc/boot/reg.h @@ -16,6 +16,14 @@ static inline u32 mfpvr(void) return pvr; } +#define __stringify_1(x) #x +#define __stringify(x) __stringify_1(x) + +#define mfspr(rn) ({unsigned long rval; \ + asm volatile("mfspr %0," __stringify(rn) \ + : "=r" (rval)); rval; }) +#define mtspr(rn, v) asm volatile("mtspr " __stringify(rn) ",%0" : : "r" (v)) + register void *__stack_pointer asm("r1"); #define get_sp() (__stack_pointer) diff --git a/arch/powerpc/boot/serial.c b/arch/powerpc/boot/serial.c index cafeece20ac..9960421eb6b 100644 --- a/arch/powerpc/boot/serial.c +++ b/arch/powerpc/boot/serial.c @@ -126,9 +126,10 @@ int serial_console_init(void) dt_is_compatible(devp, "fsl,cpm2-scc-uart") || dt_is_compatible(devp, "fsl,cpm2-smc-uart")) rc = cpm_console_init(devp, &serial_cd); - else if (dt_is_compatible(devp, "mpc5200-psc-uart")) + else if (dt_is_compatible(devp, "fsl,mpc5200-psc-uart")) rc = mpc5200_psc_console_init(devp, &serial_cd); - else if (dt_is_compatible(devp, "xilinx,uartlite")) + else if (dt_is_compatible(devp, "xlnx,opb-uartlite-1.00.b") || + dt_is_compatible(devp, "xlnx,xps-uartlite-1.00.a")) rc = uartlite_console_init(devp, &serial_cd); /* Add other serial console driver calls here */ diff --git a/arch/powerpc/boot/treeboot-walnut.c b/arch/powerpc/boot/treeboot-walnut.c index bb2c309d70f..472e36605a5 100644 --- a/arch/powerpc/boot/treeboot-walnut.c +++ b/arch/powerpc/boot/treeboot-walnut.c @@ -20,55 +20,6 @@ BSS_STACK(4096); -void ibm405gp_fixup_clocks(unsigned int sysclk, unsigned int ser_clk) -{ - u32 pllmr = mfdcr(DCRN_CPC0_PLLMR); - u32 cpc0_cr0 = mfdcr(DCRN_405_CPC0_CR0); - u32 cpc0_cr1 = mfdcr(DCRN_405_CPC0_CR1); - u32 cpu, plb, opb, ebc, tb, uart0, uart1, m; - u32 fwdv, fbdv, cbdv, opdv, epdv, udiv; - - fwdv = (8 - ((pllmr & 0xe0000000) >> 29)); - fbdv = (pllmr & 0x1e000000) >> 25; - cbdv = ((pllmr & 0x00060000) >> 17) + 1; - opdv = ((pllmr & 0x00018000) >> 15) + 1; - epdv = ((pllmr & 0x00001800) >> 13) + 2; - udiv = ((cpc0_cr0 & 0x3e) >> 1) + 1; - - m = fwdv * fbdv * cbdv; - - cpu = sysclk * m / fwdv; - plb = cpu / cbdv; - opb = plb / opdv; - ebc = plb / epdv; - - if (cpc0_cr0 & 0x80) { - /* uart0 uses the external clock */ - uart0 = ser_clk; - } else { - uart0 = cpu / udiv; - } - - if (cpc0_cr0 & 0x40) { - /* uart1 uses the external clock */ - uart1 = ser_clk; - } else { - uart1 = cpu / udiv; - } - - /* setup the timebase clock to tick at the cpu frequency */ - cpc0_cr1 = cpc0_cr1 & ~0x00800000; - mtdcr(DCRN_405_CPC0_CR1, cpc0_cr1); - tb = cpu; - - dt_fixup_cpu_clocks(cpu, tb, 0); - dt_fixup_clock("/plb", plb); - dt_fixup_clock("/plb/opb", opb); - dt_fixup_clock("/plb/ebc", ebc); - dt_fixup_clock("/plb/opb/serial@ef600300", uart0); - dt_fixup_clock("/plb/opb/serial@ef600400", uart1); -} - static void walnut_flashsel_fixup(void) { void *devp, *sram; @@ -112,7 +63,7 @@ static void walnut_flashsel_fixup(void) #define WALNUT_OPENBIOS_MAC_OFF 0xfffffe0b static void walnut_fixups(void) { - ibm4xx_fixup_memsize(); + ibm4xx_sdram_fixup_memsize(); ibm405gp_fixup_clocks(33330000, 0xa8c000); ibm4xx_quiesce_eth((u32 *)0xef600800, NULL); ibm4xx_fixup_ebc_ranges("/plb/ebc"); @@ -128,6 +79,6 @@ void platform_init(void) simple_alloc_init(_end, avail_ram, 32, 32); platform_ops.fixups = walnut_fixups; platform_ops.exit = ibm40x_dbcr_reset; - ft_init(_dtb_start, _dtb_end - _dtb_start, 32); + fdt_init(_dtb_start); serial_console_init(); } diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper index 31147a03772..763a0c46f44 100755 --- a/arch/powerpc/boot/wrapper +++ b/arch/powerpc/boot/wrapper @@ -45,6 +45,7 @@ CROSS= # directory for object and other files used by this script object=arch/powerpc/boot +objbin=$object # directory for working files tmpdir=. @@ -95,6 +96,7 @@ while [ "$#" -gt 0 ]; do shift [ "$#" -gt 0 ] || usage object="$1" + objbin="$1" ;; -W) shift @@ -116,10 +118,13 @@ while [ "$#" -gt 0 ]; do done if [ -n "$dts" ]; then + if [ ! -r "$dts" -a -r "$object/dts/$dts" ]; then + dts="$object/dts/$dts" + fi if [ -z "$dtb" ]; then dtb="$platform.dtb" fi - dtc -O dtb -o "$dtb" -b 0 -V 16 "$dts" + $object/dtc -O dtb -o "$dtb" -b 0 "$dts" fi if [ -z "$kernel" ]; then @@ -163,7 +168,7 @@ ps3) ksection=.kernel:vmlinux.bin isection=.kernel:initrd ;; -ep88xc) +ep88xc|ep405|redboot*|ep8248e) platformo="$object/fixed-head.o $object/$platform.o" binary=y ;; @@ -246,11 +251,11 @@ fi # post-processing needed for some platforms case "$platform" in pseries|chrp) - $object/addnote "$ofile" + $objbin/addnote "$ofile" ;; coff) ${CROSS}objcopy -O aixcoff-rs6000 --set-start "$entry" "$ofile" - $object/hack-coff "$ofile" + $objbin/hack-coff "$ofile" ;; cuboot*) gzip -f -9 "$ofile" @@ -259,7 +264,7 @@ cuboot*) ;; treeboot*) mv "$ofile" "$ofile.elf" - $object/mktree "$ofile.elf" "$ofile" "$base" "$entry" + $objbin/mktree "$ofile.elf" "$ofile" "$base" "$entry" if [ -z "$cacheit" ]; then rm -f "$ofile.elf" fi @@ -287,8 +292,6 @@ ps3) overlay_dest="256" overlay_size="256" - rm -f "$object/otheros.bld" - ${CROSS}objcopy -O binary "$ofile" "$ofile.bin" dd if="$ofile.bin" of="$ofile.bin" conv=notrunc \ @@ -299,6 +302,8 @@ ps3) skip=$system_reset_overlay seek=$overlay_dest \ count=$overlay_size bs=1 - gzip --force -9 --stdout "$ofile.bin" > "$object/otheros.bld" + odir="$(dirname "$ofile.bin")" + rm -f "$odir/otheros.bld" + gzip --force -9 --stdout "$ofile.bin" > "$odir/otheros.bld" ;; esac |