diff options
Diffstat (limited to 'arch/powerpc/include/asm/exception.h')
| -rw-r--r-- | arch/powerpc/include/asm/exception.h | 311 |
1 files changed, 311 insertions, 0 deletions
diff --git a/arch/powerpc/include/asm/exception.h b/arch/powerpc/include/asm/exception.h new file mode 100644 index 00000000000..329148b5acc --- /dev/null +++ b/arch/powerpc/include/asm/exception.h @@ -0,0 +1,311 @@ +#ifndef _ASM_POWERPC_EXCEPTION_H +#define _ASM_POWERPC_EXCEPTION_H +/* + * Extracted from head_64.S + * + * PowerPC version + * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) + * + * Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP + * Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu> + * Adapted for Power Macintosh by Paul Mackerras. + * Low-level exception handlers and MMU support + * rewritten by Paul Mackerras. + * Copyright (C) 1996 Paul Mackerras. + * + * Adapted for 64bit PowerPC by Dave Engebretsen, Peter Bergner, and + * Mike Corrigan {engebret|bergner|mikejc}@us.ibm.com + * + * This file contains the low-level support and setup for the + * PowerPC-64 platform, including trap and interrupt dispatch. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +/* + * The following macros define the code that appears as + * the prologue to each of the exception handlers. They + * are split into two parts to allow a single kernel binary + * to be used for pSeries and iSeries. + * + * We make as much of the exception code common between native + * exception handlers (including pSeries LPAR) and iSeries LPAR + * implementations as possible. + */ + +#define EX_R9 0 +#define EX_R10 8 +#define EX_R11 16 +#define EX_R12 24 +#define EX_R13 32 +#define EX_SRR0 40 +#define EX_DAR 48 +#define EX_DSISR 56 +#define EX_CCR 60 +#define EX_R3 64 +#define EX_LR 72 + +/* + * We're short on space and time in the exception prolog, so we can't + * use the normal SET_REG_IMMEDIATE macro. Normally we just need the + * low halfword of the address, but for Kdump we need the whole low + * word. + */ +#ifdef CONFIG_CRASH_DUMP +#define LOAD_HANDLER(reg, label) \ + oris reg,reg,(label)@h; /* virt addr of handler ... */ \ + ori reg,reg,(label)@l; /* .. and the rest */ +#else +#define LOAD_HANDLER(reg, label) \ + ori reg,reg,(label)@l; /* virt addr of handler ... */ +#endif + +#define EXCEPTION_PROLOG_1(area) \ + mfspr r13,SPRN_SPRG3; /* get paca address into r13 */ \ + std r9,area+EX_R9(r13); /* save r9 - r12 */ \ + std r10,area+EX_R10(r13); \ + std r11,area+EX_R11(r13); \ + std r12,area+EX_R12(r13); \ + mfspr r9,SPRN_SPRG1; \ + std r9,area+EX_R13(r13); \ + mfcr r9 + +/* + * Equal to EXCEPTION_PROLOG_PSERIES, except that it forces 64bit mode. + * The firmware calls the registered system_reset_fwnmi and + * machine_check_fwnmi handlers in 32bit mode if the cpu happens to run + * a 32bit application at the time of the event. + * This firmware bug is present on POWER4 and JS20. + */ +#define EXCEPTION_PROLOG_PSERIES_FORCE_64BIT(area, label) \ + EXCEPTION_PROLOG_1(area); \ + clrrdi r12,r13,32; /* get high part of &label */ \ + mfmsr r10; \ + /* force 64bit mode */ \ + li r11,5; /* MSR_SF_LG|MSR_ISF_LG */ \ + rldimi r10,r11,61,0; /* insert into top 3 bits */ \ + /* done 64bit mode */ \ + mfspr r11,SPRN_SRR0; /* save SRR0 */ \ + LOAD_HANDLER(r12,label) \ + ori r10,r10,MSR_IR|MSR_DR|MSR_RI; \ + mtspr SPRN_SRR0,r12; \ + mfspr r12,SPRN_SRR1; /* and SRR1 */ \ + mtspr SPRN_SRR1,r10; \ + rfid; \ + b . /* prevent speculative execution */ + +#define EXCEPTION_PROLOG_PSERIES(area, label) \ + EXCEPTION_PROLOG_1(area); \ + clrrdi r12,r13,32; /* get high part of &label */ \ + mfmsr r10; \ + mfspr r11,SPRN_SRR0; /* save SRR0 */ \ + LOAD_HANDLER(r12,label) \ + ori r10,r10,MSR_IR|MSR_DR|MSR_RI; \ + mtspr SPRN_SRR0,r12; \ + mfspr r12,SPRN_SRR1; /* and SRR1 */ \ + mtspr SPRN_SRR1,r10; \ + rfid; \ + b . /* prevent speculative execution */ + +/* + * The common exception prolog is used for all except a few exceptions + * such as a segment miss on a kernel address. We have to be prepared + * to take another exception from the point where we first touch the + * kernel stack onwards. + * + * On entry r13 points to the paca, r9-r13 are saved in the paca, + * r9 contains the saved CR, r11 and r12 contain the saved SRR0 and + * SRR1, and relocation is on. + */ +#define EXCEPTION_PROLOG_COMMON(n, area) \ + andi. r10,r12,MSR_PR; /* See if coming from user */ \ + mr r10,r1; /* Save r1 */ \ + subi r1,r1,INT_FRAME_SIZE; /* alloc frame on kernel stack */ \ + beq- 1f; \ + ld r1,PACAKSAVE(r13); /* kernel stack to use */ \ +1: cmpdi cr1,r1,0; /* check if r1 is in userspace */ \ + bge- cr1,2f; /* abort if it is */ \ + b 3f; \ +2: li r1,(n); /* will be reloaded later */ \ + sth r1,PACA_TRAP_SAVE(r13); \ + b bad_stack; \ +3: std r9,_CCR(r1); /* save CR in stackframe */ \ + std r11,_NIP(r1); /* save SRR0 in stackframe */ \ + std r12,_MSR(r1); /* save SRR1 in stackframe */ \ + std r10,0(r1); /* make stack chain pointer */ \ + std r0,GPR0(r1); /* save r0 in stackframe */ \ + std r10,GPR1(r1); /* save r1 in stackframe */ \ + ACCOUNT_CPU_USER_ENTRY(r9, r10); \ + std r2,GPR2(r1); /* save r2 in stackframe */ \ + SAVE_4GPRS(3, r1); /* save r3 - r6 in stackframe */ \ + SAVE_2GPRS(7, r1); /* save r7, r8 in stackframe */ \ + ld r9,area+EX_R9(r13); /* move r9, r10 to stackframe */ \ + ld r10,area+EX_R10(r13); \ + std r9,GPR9(r1); \ + std r10,GPR10(r1); \ + ld r9,area+EX_R11(r13); /* move r11 - r13 to stackframe */ \ + ld r10,area+EX_R12(r13); \ + ld r11,area+EX_R13(r13); \ + std r9,GPR11(r1); \ + std r10,GPR12(r1); \ + std r11,GPR13(r1); \ + ld r2,PACATOC(r13); /* get kernel TOC into r2 */ \ + mflr r9; /* save LR in stackframe */ \ + std r9,_LINK(r1); \ + mfctr r10; /* save CTR in stackframe */ \ + std r10,_CTR(r1); \ + lbz r10,PACASOFTIRQEN(r13); \ + mfspr r11,SPRN_XER; /* save XER in stackframe */ \ + std r10,SOFTE(r1); \ + std r11,_XER(r1); \ + li r9,(n)+1; \ + std r9,_TRAP(r1); /* set trap number */ \ + li r10,0; \ + ld r11,exception_marker@toc(r2); \ + std r10,RESULT(r1); /* clear regs->result */ \ + std r11,STACK_FRAME_OVERHEAD-16(r1); /* mark the frame */ + +/* + * Exception vectors. + */ +#define STD_EXCEPTION_PSERIES(n, label) \ + . = n; \ + .globl label##_pSeries; \ +label##_pSeries: \ + HMT_MEDIUM; \ + mtspr SPRN_SPRG1,r13; /* save r13 */ \ + EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common) + +#define HSTD_EXCEPTION_PSERIES(n, label) \ + . = n; \ + .globl label##_pSeries; \ +label##_pSeries: \ + HMT_MEDIUM; \ + mtspr SPRN_SPRG1,r20; /* save r20 */ \ + mfspr r20,SPRN_HSRR0; /* copy HSRR0 to SRR0 */ \ + mtspr SPRN_SRR0,r20; \ + mfspr r20,SPRN_HSRR1; /* copy HSRR0 to SRR0 */ \ + mtspr SPRN_SRR1,r20; \ + mfspr r20,SPRN_SPRG1; /* restore r20 */ \ + mtspr SPRN_SPRG1,r13; /* save r13 */ \ + EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common) + + +#define MASKABLE_EXCEPTION_PSERIES(n, label) \ + . = n; \ + .globl label##_pSeries; \ +label##_pSeries: \ + HMT_MEDIUM; \ + mtspr SPRN_SPRG1,r13; /* save r13 */ \ + mfspr r13,SPRN_SPRG3; /* get paca address into r13 */ \ + std r9,PACA_EXGEN+EX_R9(r13); /* save r9, r10 */ \ + std r10,PACA_EXGEN+EX_R10(r13); \ + lbz r10,PACASOFTIRQEN(r13); \ + mfcr r9; \ + cmpwi r10,0; \ + beq masked_interrupt; \ + mfspr r10,SPRN_SPRG1; \ + std r10,PACA_EXGEN+EX_R13(r13); \ + std r11,PACA_EXGEN+EX_R11(r13); \ + std r12,PACA_EXGEN+EX_R12(r13); \ + clrrdi r12,r13,32; /* get high part of &label */ \ + mfmsr r10; \ + mfspr r11,SPRN_SRR0; /* save SRR0 */ \ + LOAD_HANDLER(r12,label##_common) \ + ori r10,r10,MSR_IR|MSR_DR|MSR_RI; \ + mtspr SPRN_SRR0,r12; \ + mfspr r12,SPRN_SRR1; /* and SRR1 */ \ + mtspr SPRN_SRR1,r10; \ + rfid; \ + b . /* prevent speculative execution */ + +#ifdef CONFIG_PPC_ISERIES +#define DISABLE_INTS \ + li r11,0; \ + stb r11,PACASOFTIRQEN(r13); \ +BEGIN_FW_FTR_SECTION; \ + stb r11,PACAHARDIRQEN(r13); \ +END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES); \ + TRACE_DISABLE_INTS; \ +BEGIN_FW_FTR_SECTION; \ + mfmsr r10; \ + ori r10,r10,MSR_EE; \ + mtmsrd r10,1; \ +END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) +#else +#define DISABLE_INTS \ + li r11,0; \ + stb r11,PACASOFTIRQEN(r13); \ + stb r11,PACAHARDIRQEN(r13); \ + TRACE_DISABLE_INTS +#endif /* CONFIG_PPC_ISERIES */ + +#define ENABLE_INTS \ + ld r12,_MSR(r1); \ + mfmsr r11; \ + rlwimi r11,r12,0,MSR_EE; \ + mtmsrd r11,1 + +#define STD_EXCEPTION_COMMON(trap, label, hdlr) \ + .align 7; \ + .globl label##_common; \ +label##_common: \ + EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \ + DISABLE_INTS; \ + bl .save_nvgprs; \ + addi r3,r1,STACK_FRAME_OVERHEAD; \ + bl hdlr; \ + b .ret_from_except + +/* + * Like STD_EXCEPTION_COMMON, but for exceptions that can occur + * in the idle task and therefore need the special idle handling. + */ +#define STD_EXCEPTION_COMMON_IDLE(trap, label, hdlr) \ + .align 7; \ + .globl label##_common; \ +label##_common: \ + EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \ + FINISH_NAP; \ + DISABLE_INTS; \ + bl .save_nvgprs; \ + addi r3,r1,STACK_FRAME_OVERHEAD; \ + bl hdlr; \ + b .ret_from_except + +#define STD_EXCEPTION_COMMON_LITE(trap, label, hdlr) \ + .align 7; \ + .globl label##_common; \ +label##_common: \ + EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \ + FINISH_NAP; \ + DISABLE_INTS; \ +BEGIN_FTR_SECTION \ + bl .ppc64_runlatch_on; \ +END_FTR_SECTION_IFSET(CPU_FTR_CTRL) \ + addi r3,r1,STACK_FRAME_OVERHEAD; \ + bl hdlr; \ + b .ret_from_except_lite + +/* + * When the idle code in power4_idle puts the CPU into NAP mode, + * it has to do so in a loop, and relies on the external interrupt + * and decrementer interrupt entry code to get it out of the loop. + * It sets the _TLF_NAPPING bit in current_thread_info()->local_flags + * to signal that it is in the loop and needs help to get out. + */ +#ifdef CONFIG_PPC_970_NAP +#define FINISH_NAP \ +BEGIN_FTR_SECTION \ + clrrdi r11,r1,THREAD_SHIFT; \ + ld r9,TI_LOCAL_FLAGS(r11); \ + andi. r10,r9,_TLF_NAPPING; \ + bnel power4_fixup_nap; \ +END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP) +#else +#define FINISH_NAP +#endif + +#endif /* _ASM_POWERPC_EXCEPTION_H */ |