diff options
Diffstat (limited to 'arch/powerpc/include/asm/irq.h')
| -rw-r--r-- | arch/powerpc/include/asm/irq.h | 110 |
1 files changed, 20 insertions, 90 deletions
diff --git a/arch/powerpc/include/asm/irq.h b/arch/powerpc/include/asm/irq.h index c0e1bc319e3..cb06b39f8e6 100644 --- a/arch/powerpc/include/asm/irq.h +++ b/arch/powerpc/include/asm/irq.h @@ -9,6 +9,7 @@ * 2 of the License, or (at your option) any later version. */ +#include <linux/irqdomain.h> #include <linux/threads.h> #include <linux/list.h> #include <linux/radix-tree.h> @@ -41,20 +42,7 @@ extern atomic_t ppc_n_lost_interrupts; /* Same thing, used by the generic IRQ code */ #define NR_IRQS_LEGACY NUM_ISA_INTERRUPTS -/* This type is the placeholder for a hardware interrupt number. It has to - * be big enough to enclose whatever representation is used by a given - * platform. - */ -typedef unsigned long irq_hw_number_t; - -/* Interrupt controller "host" data structure. This could be defined as a - * irq domain controller. That is, it handles the mapping between hardware - * and virtual interrupt numbers for a given interrupt domain. The host - * structure is generally created by the PIC code for a given PIC instance - * (though a host can cover more than one PIC if they have a flat number - * model). It's the host callbacks that are responsible for setting the - * irq_chip on a given irq_desc after it's been mapped. - * +/* * The host code and data structures are fairly agnostic to the fact that * we use an open firmware device-tree. We do have references to struct * device_node in two places: in irq_find_host() to find the host matching @@ -66,90 +54,32 @@ typedef unsigned long irq_hw_number_t; * by some sort of arch-specific void * "token" used to identify interrupt * controllers. */ -struct irq_host; -struct radix_tree_root; - -/* Functions below are provided by the host and called whenever a new mapping - * is created or an old mapping is disposed. The host can then proceed to - * whatever internal data structures management is required. It also needs - * to setup the irq_desc when returning from map(). - */ -struct irq_host_ops { - /* Match an interrupt controller device node to a host, returns - * 1 on a match - */ - int (*match)(struct irq_host *h, struct device_node *node); - - /* Create or update a mapping between a virtual irq number and a hw - * irq number. This is called only once for a given mapping. - */ - int (*map)(struct irq_host *h, unsigned int virq, irq_hw_number_t hw); - - /* Dispose of such a mapping */ - void (*unmap)(struct irq_host *h, unsigned int virq); - - /* Translate device-tree interrupt specifier from raw format coming - * from the firmware to a irq_hw_number_t (interrupt line number) and - * type (sense) that can be passed to set_irq_type(). In the absence - * of this callback, irq_create_of_mapping() and irq_of_parse_and_map() - * will return the hw number in the first cell and IRQ_TYPE_NONE for - * the type (which amount to keeping whatever default value the - * interrupt controller has for that line) - */ - int (*xlate)(struct irq_host *h, struct device_node *ctrler, - const u32 *intspec, unsigned int intsize, - irq_hw_number_t *out_hwirq, unsigned int *out_type); -}; - -struct irq_host { - struct list_head link; - - /* type of reverse mapping technique */ - unsigned int revmap_type; -#define IRQ_HOST_MAP_LEGACY 0 /* legacy 8259, gets irqs 1..15 */ -#define IRQ_HOST_MAP_NOMAP 1 /* no fast reverse mapping */ -#define IRQ_HOST_MAP_LINEAR 2 /* linear map of interrupts */ -#define IRQ_HOST_MAP_TREE 3 /* radix tree */ - union { - struct { - unsigned int size; - unsigned int *revmap; - } linear; - struct radix_tree_root tree; - } revmap_data; - struct irq_host_ops *ops; - void *host_data; - irq_hw_number_t inval_irq; - - /* Optional device node pointer */ - struct device_node *of_node; -}; struct irq_data; extern irq_hw_number_t irqd_to_hwirq(struct irq_data *d); extern irq_hw_number_t virq_to_hw(unsigned int virq); -extern bool virq_is_host(unsigned int virq, struct irq_host *host); +extern bool virq_is_host(unsigned int virq, struct irq_domain *host); /** - * irq_alloc_host - Allocate a new irq_host data structure + * irq_alloc_host - Allocate a new irq_domain data structure * @of_node: optional device-tree node of the interrupt controller * @revmap_type: type of reverse mapping to use - * @revmap_arg: for IRQ_HOST_MAP_LINEAR linear only: size of the map + * @revmap_arg: for IRQ_DOMAIN_MAP_LINEAR linear only: size of the map * @ops: map/unmap host callbacks * @inval_irq: provide a hw number in that host space that is always invalid * - * Allocates and initialize and irq_host structure. Note that in the case of - * IRQ_HOST_MAP_LEGACY, the map() callback will be called before this returns + * Allocates and initialize and irq_domain structure. Note that in the case of + * IRQ_DOMAIN_MAP_LEGACY, the map() callback will be called before this returns * for all legacy interrupts except 0 (which is always the invalid irq for - * a legacy controller). For a IRQ_HOST_MAP_LINEAR, the map is allocated by - * this call as well. For a IRQ_HOST_MAP_TREE, the radix tree will be allocated + * a legacy controller). For a IRQ_DOMAIN_MAP_LINEAR, the map is allocated by + * this call as well. For a IRQ_DOMAIN_MAP_TREE, the radix tree will be allocated * later during boot automatically (the reverse mapping will use the slow path * until that happens). */ -extern struct irq_host *irq_alloc_host(struct device_node *of_node, +extern struct irq_domain *irq_alloc_host(struct device_node *of_node, unsigned int revmap_type, unsigned int revmap_arg, - struct irq_host_ops *ops, + struct irq_domain_ops *ops, irq_hw_number_t inval_irq); @@ -157,7 +87,7 @@ extern struct irq_host *irq_alloc_host(struct device_node *of_node, * irq_find_host - Locates a host for a given device node * @node: device-tree node of the interrupt controller */ -extern struct irq_host *irq_find_host(struct device_node *node); +extern struct irq_domain *irq_find_host(struct device_node *node); /** @@ -169,7 +99,7 @@ extern struct irq_host *irq_find_host(struct device_node *node); * platforms that want to manipulate a few hard coded interrupt numbers that * aren't properly represented in the device-tree. */ -extern void irq_set_default_host(struct irq_host *host); +extern void irq_set_default_host(struct irq_domain *host); /** @@ -192,7 +122,7 @@ extern void irq_set_virq_count(unsigned int count); * If the sense/trigger is to be specified, set_irq_type() should be called * on the number returned from that call. */ -extern unsigned int irq_create_mapping(struct irq_host *host, +extern unsigned int irq_create_mapping(struct irq_domain *host, irq_hw_number_t hwirq); @@ -211,7 +141,7 @@ extern void irq_dispose_mapping(unsigned int virq); * irq controller implementation directly calls the appropriate low level * mapping function. */ -extern unsigned int irq_find_mapping(struct irq_host *host, +extern unsigned int irq_find_mapping(struct irq_domain *host, irq_hw_number_t hwirq); /** @@ -222,7 +152,7 @@ extern unsigned int irq_find_mapping(struct irq_host *host, * interrupt numbers they generate. In such a case it's simplest to use * the linux virq as the hardware interrupt number. */ -extern unsigned int irq_create_direct_mapping(struct irq_host *host); +extern unsigned int irq_create_direct_mapping(struct irq_domain *host); /** * irq_radix_revmap_insert - Insert a hw irq to linux virq number mapping. @@ -233,7 +163,7 @@ extern unsigned int irq_create_direct_mapping(struct irq_host *host); * This is for use by irq controllers that use a radix tree reverse * mapping for fast lookup. */ -extern void irq_radix_revmap_insert(struct irq_host *host, unsigned int virq, +extern void irq_radix_revmap_insert(struct irq_domain *host, unsigned int virq, irq_hw_number_t hwirq); /** @@ -244,7 +174,7 @@ extern void irq_radix_revmap_insert(struct irq_host *host, unsigned int virq, * This is a fast path, for use by irq controller code that uses radix tree * revmaps */ -extern unsigned int irq_radix_revmap_lookup(struct irq_host *host, +extern unsigned int irq_radix_revmap_lookup(struct irq_domain *host, irq_hw_number_t hwirq); /** @@ -257,7 +187,7 @@ extern unsigned int irq_radix_revmap_lookup(struct irq_host *host, * yet and will create the revmap entry with appropriate locking */ -extern unsigned int irq_linear_revmap(struct irq_host *host, +extern unsigned int irq_linear_revmap(struct irq_domain *host, irq_hw_number_t hwirq); @@ -272,7 +202,7 @@ extern unsigned int irq_linear_revmap(struct irq_host *host, * and that can be used by some irq controllers implementations for things * like allocating ranges of numbers for MSIs. The revmaps are left untouched. */ -extern unsigned int irq_alloc_virt(struct irq_host *host, +extern unsigned int irq_alloc_virt(struct irq_domain *host, unsigned int count, unsigned int hint); |