diff options
Diffstat (limited to 'arch/powerpc/include/asm/rtas.h')
| -rw-r--r-- | arch/powerpc/include/asm/rtas.h | 247 |
1 files changed, 247 insertions, 0 deletions
diff --git a/arch/powerpc/include/asm/rtas.h b/arch/powerpc/include/asm/rtas.h new file mode 100644 index 00000000000..8eaa7b28d9d --- /dev/null +++ b/arch/powerpc/include/asm/rtas.h @@ -0,0 +1,247 @@ +#ifndef _POWERPC_RTAS_H +#define _POWERPC_RTAS_H +#ifdef __KERNEL__ + +#include <linux/spinlock.h> +#include <asm/page.h> + +/* + * Definitions for talking to the RTAS on CHRP machines. + * + * Copyright (C) 2001 Peter Bergner + * Copyright (C) 2001 PPC 64 Team, IBM Corp + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#define RTAS_UNKNOWN_SERVICE (-1) +#define RTAS_INSTANTIATE_MAX (1UL<<30) /* Don't instantiate rtas at/above this value */ + +/* Buffer size for ppc_rtas system call. */ +#define RTAS_RMOBUF_MAX (64 * 1024) + +/* RTAS return status codes */ +#define RTAS_NOT_SUSPENDABLE -9004 +#define RTAS_BUSY -2 /* RTAS Busy */ +#define RTAS_EXTENDED_DELAY_MIN 9900 +#define RTAS_EXTENDED_DELAY_MAX 9905 + +/* + * In general to call RTAS use rtas_token("string") to lookup + * an RTAS token for the given string (e.g. "event-scan"). + * To actually perform the call use + * ret = rtas_call(token, n_in, n_out, ...) + * Where n_in is the number of input parameters and + * n_out is the number of output parameters + * + * If the "string" is invalid on this system, RTAS_UNKNOWN_SERVICE + * will be returned as a token. rtas_call() does look for this + * token and error out gracefully so rtas_call(rtas_token("str"), ...) + * may be safely used for one-shot calls to RTAS. + * + */ + +typedef u32 rtas_arg_t; + +struct rtas_args { + u32 token; + u32 nargs; + u32 nret; + rtas_arg_t args[16]; + rtas_arg_t *rets; /* Pointer to return values in args[]. */ +}; + +struct rtas_t { + unsigned long entry; /* physical address pointer */ + unsigned long base; /* physical address pointer */ + unsigned long size; + spinlock_t lock; + struct rtas_args args; + struct device_node *dev; /* virtual address pointer */ +}; + +/* RTAS event classes */ +#define RTAS_INTERNAL_ERROR 0x80000000 /* set bit 0 */ +#define RTAS_EPOW_WARNING 0x40000000 /* set bit 1 */ +#define RTAS_POWERMGM_EVENTS 0x20000000 /* set bit 2 */ +#define RTAS_HOTPLUG_EVENTS 0x10000000 /* set bit 3 */ +#define RTAS_EVENT_SCAN_ALL_EVENTS 0xf0000000 + +/* RTAS event severity */ +#define RTAS_SEVERITY_FATAL 0x5 +#define RTAS_SEVERITY_ERROR 0x4 +#define RTAS_SEVERITY_ERROR_SYNC 0x3 +#define RTAS_SEVERITY_WARNING 0x2 +#define RTAS_SEVERITY_EVENT 0x1 +#define RTAS_SEVERITY_NO_ERROR 0x0 + +/* RTAS event disposition */ +#define RTAS_DISP_FULLY_RECOVERED 0x0 +#define RTAS_DISP_LIMITED_RECOVERY 0x1 +#define RTAS_DISP_NOT_RECOVERED 0x2 + +/* RTAS event initiator */ +#define RTAS_INITIATOR_UNKNOWN 0x0 +#define RTAS_INITIATOR_CPU 0x1 +#define RTAS_INITIATOR_PCI 0x2 +#define RTAS_INITIATOR_ISA 0x3 +#define RTAS_INITIATOR_MEMORY 0x4 +#define RTAS_INITIATOR_POWERMGM 0x5 + +/* RTAS event target */ +#define RTAS_TARGET_UNKNOWN 0x0 +#define RTAS_TARGET_CPU 0x1 +#define RTAS_TARGET_PCI 0x2 +#define RTAS_TARGET_ISA 0x3 +#define RTAS_TARGET_MEMORY 0x4 +#define RTAS_TARGET_POWERMGM 0x5 + +/* RTAS event type */ +#define RTAS_TYPE_RETRY 0x01 +#define RTAS_TYPE_TCE_ERR 0x02 +#define RTAS_TYPE_INTERN_DEV_FAIL 0x03 +#define RTAS_TYPE_TIMEOUT 0x04 +#define RTAS_TYPE_DATA_PARITY 0x05 +#define RTAS_TYPE_ADDR_PARITY 0x06 +#define RTAS_TYPE_CACHE_PARITY 0x07 +#define RTAS_TYPE_ADDR_INVALID 0x08 +#define RTAS_TYPE_ECC_UNCORR 0x09 +#define RTAS_TYPE_ECC_CORR 0x0a +#define RTAS_TYPE_EPOW 0x40 +#define RTAS_TYPE_PLATFORM 0xE0 +#define RTAS_TYPE_IO 0xE1 +#define RTAS_TYPE_INFO 0xE2 +#define RTAS_TYPE_DEALLOC 0xE3 +#define RTAS_TYPE_DUMP 0xE4 +/* I don't add PowerMGM events right now, this is a different topic */ +#define RTAS_TYPE_PMGM_POWER_SW_ON 0x60 +#define RTAS_TYPE_PMGM_POWER_SW_OFF 0x61 +#define RTAS_TYPE_PMGM_LID_OPEN 0x62 +#define RTAS_TYPE_PMGM_LID_CLOSE 0x63 +#define RTAS_TYPE_PMGM_SLEEP_BTN 0x64 +#define RTAS_TYPE_PMGM_WAKE_BTN 0x65 +#define RTAS_TYPE_PMGM_BATTERY_WARN 0x66 +#define RTAS_TYPE_PMGM_BATTERY_CRIT 0x67 +#define RTAS_TYPE_PMGM_SWITCH_TO_BAT 0x68 +#define RTAS_TYPE_PMGM_SWITCH_TO_AC 0x69 +#define RTAS_TYPE_PMGM_KBD_OR_MOUSE 0x6a +#define RTAS_TYPE_PMGM_ENCLOS_OPEN 0x6b +#define RTAS_TYPE_PMGM_ENCLOS_CLOSED 0x6c +#define RTAS_TYPE_PMGM_RING_INDICATE 0x6d +#define RTAS_TYPE_PMGM_LAN_ATTENTION 0x6e +#define RTAS_TYPE_PMGM_TIME_ALARM 0x6f +#define RTAS_TYPE_PMGM_CONFIG_CHANGE 0x70 +#define RTAS_TYPE_PMGM_SERVICE_PROC 0x71 + +struct rtas_error_log { + unsigned long version:8; /* Architectural version */ + unsigned long severity:3; /* Severity level of error */ + unsigned long disposition:2; /* Degree of recovery */ + unsigned long extended:1; /* extended log present? */ + unsigned long /* reserved */ :2; /* Reserved for future use */ + unsigned long initiator:4; /* Initiator of event */ + unsigned long target:4; /* Target of failed operation */ + unsigned long type:8; /* General event or error*/ + unsigned long extended_log_length:32; /* length in bytes */ + unsigned char buffer[1]; +}; + +/* + * This can be set by the rtas_flash module so that it can get called + * as the absolutely last thing before the kernel terminates. + */ +extern void (*rtas_flash_term_hook)(int); + +extern struct rtas_t rtas; + +extern void enter_rtas(unsigned long); +extern int rtas_token(const char *service); +extern int rtas_service_present(const char *service); +extern int rtas_call(int token, int, int, int *, ...); +extern void rtas_restart(char *cmd); +extern void rtas_power_off(void); +extern void rtas_halt(void); +extern void rtas_os_term(char *str); +extern int rtas_get_sensor(int sensor, int index, int *state); +extern int rtas_get_power_level(int powerdomain, int *level); +extern int rtas_set_power_level(int powerdomain, int level, int *setlevel); +extern int rtas_set_indicator(int indicator, int index, int new_value); +extern int rtas_set_indicator_fast(int indicator, int index, int new_value); +extern void rtas_progress(char *s, unsigned short hex); +extern void rtas_initialize(void); + +struct rtc_time; +extern unsigned long rtas_get_boot_time(void); +extern void rtas_get_rtc_time(struct rtc_time *rtc_time); +extern int rtas_set_rtc_time(struct rtc_time *rtc_time); + +extern unsigned int rtas_busy_delay_time(int status); +extern unsigned int rtas_busy_delay(int status); + +extern int early_init_dt_scan_rtas(unsigned long node, + const char *uname, int depth, void *data); + +extern void pSeries_log_error(char *buf, unsigned int err_type, int fatal); + +/* Error types logged. */ +#define ERR_FLAG_ALREADY_LOGGED 0x0 +#define ERR_FLAG_BOOT 0x1 /* log was pulled from NVRAM on boot */ +#define ERR_TYPE_RTAS_LOG 0x2 /* from rtas event-scan */ +#define ERR_TYPE_KERNEL_PANIC 0x4 /* from panic() */ + +/* All the types and not flags */ +#define ERR_TYPE_MASK (ERR_TYPE_RTAS_LOG | ERR_TYPE_KERNEL_PANIC) + +#define RTAS_DEBUG KERN_DEBUG "RTAS: " + +#define RTAS_ERROR_LOG_MAX 2048 + +/* + * Return the firmware-specified size of the error log buffer + * for all rtas calls that require an error buffer argument. + * This includes 'check-exception' and 'rtas-last-error'. + */ +extern int rtas_get_error_log_max(void); + +/* Event Scan Parameters */ +#define EVENT_SCAN_ALL_EVENTS 0xf0000000 +#define SURVEILLANCE_TOKEN 9000 +#define LOG_NUMBER 64 /* must be a power of two */ +#define LOG_NUMBER_MASK (LOG_NUMBER-1) + +/* Some RTAS ops require a data buffer and that buffer must be < 4G. + * Rather than having a memory allocator, just use this buffer + * (get the lock first), make the RTAS call. Copy the data instead + * of holding the buffer for long. + */ + +#define RTAS_DATA_BUF_SIZE 4096 +extern spinlock_t rtas_data_buf_lock; +extern char rtas_data_buf[RTAS_DATA_BUF_SIZE]; + +/* RMO buffer reserved for user-space RTAS use */ +extern unsigned long rtas_rmo_buf; + +#define GLOBAL_INTERRUPT_QUEUE 9005 + +/** + * rtas_config_addr - Format a busno, devfn and reg for RTAS. + * @busno: The bus number. + * @devfn: The device and function number as encoded by PCI_DEVFN(). + * @reg: The register number. + * + * This function encodes the given busno, devfn and register number as + * required for RTAS calls that take a "config_addr" parameter. + * See PAPR requirement 7.3.4-1 for more info. + */ +static inline u32 rtas_config_addr(int busno, int devfn, int reg) +{ + return ((reg & 0xf00) << 20) | ((busno & 0xff) << 16) | + (devfn << 8) | (reg & 0xff); +} + +#endif /* __KERNEL__ */ +#endif /* _POWERPC_RTAS_H */ |