diff options
Diffstat (limited to 'arch/powerpc/kernel/entry_64.S')
| -rw-r--r-- | arch/powerpc/kernel/entry_64.S | 250 |
1 files changed, 147 insertions, 103 deletions
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index 866462cbe2d..f8a7a1a1a9f 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -32,6 +32,7 @@ #include <asm/ptrace.h> #include <asm/irqflags.h> #include <asm/ftrace.h> +#include <asm/hw_irq.h> /* * System calls. @@ -115,39 +116,33 @@ BEGIN_FW_FTR_SECTION END_FW_FTR_SECTION_IFSET(FW_FEATURE_SPLPAR) #endif /* CONFIG_VIRT_CPU_ACCOUNTING && CONFIG_PPC_SPLPAR */ -#ifdef CONFIG_TRACE_IRQFLAGS - bl .trace_hardirqs_on - REST_GPR(0,r1) - REST_4GPRS(3,r1) - REST_2GPRS(7,r1) - addi r9,r1,STACK_FRAME_OVERHEAD - ld r12,_MSR(r1) -#endif /* CONFIG_TRACE_IRQFLAGS */ - li r10,1 - stb r10,PACASOFTIRQEN(r13) - stb r10,PACAHARDIRQEN(r13) - std r10,SOFTE(r1) -#ifdef CONFIG_PPC_ISERIES -BEGIN_FW_FTR_SECTION - /* Hack for handling interrupts when soft-enabling on iSeries */ - cmpdi cr1,r0,0x5555 /* syscall 0x5555 */ - andi. r10,r12,MSR_PR /* from kernel */ - crand 4*cr0+eq,4*cr1+eq,4*cr0+eq - bne 2f - b hardware_interrupt_entry -2: -END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) -#endif /* CONFIG_PPC_ISERIES */ + /* + * A syscall should always be called with interrupts enabled + * so we just unconditionally hard-enable here. When some kind + * of irq tracing is used, we additionally check that condition + * is correct + */ +#if defined(CONFIG_TRACE_IRQFLAGS) && defined(CONFIG_BUG) + lbz r10,PACASOFTIRQEN(r13) + xori r10,r10,1 +1: tdnei r10,0 + EMIT_BUG_ENTRY 1b,__FILE__,__LINE__,BUGFLAG_WARNING +#endif - /* Hard enable interrupts */ #ifdef CONFIG_PPC_BOOK3E wrteei 1 #else - mfmsr r11 + ld r11,PACAKMSR(r13) ori r11,r11,MSR_EE mtmsrd r11,1 #endif /* CONFIG_PPC_BOOK3E */ + /* We do need to set SOFTE in the stack frame or the return + * from interrupt will be painful + */ + li r10,1 + std r10,SOFTE(r1) + #ifdef SHOW_SYSCALLS bl .do_show_syscall REST_GPR(0,r1) @@ -198,16 +193,14 @@ syscall_exit: andi. r10,r8,MSR_RI beq- unrecov_restore #endif - - /* Disable interrupts so current_thread_info()->flags can't change, + /* + * Disable interrupts so current_thread_info()->flags can't change, * and so that we don't get interrupted after loading SRR0/1. */ #ifdef CONFIG_PPC_BOOK3E wrteei 0 #else - mfmsr r10 - rldicl r10,r10,48,1 - rotldi r10,r10,16 + ld r10,PACAKMSR(r13) mtmsrd r10,1 #endif /* CONFIG_PPC_BOOK3E */ @@ -319,7 +312,7 @@ syscall_exit_work: #ifdef CONFIG_PPC_BOOK3E wrteei 1 #else - mfmsr r10 + ld r10,PACAKMSR(r13) ori r10,r10,MSR_EE mtmsrd r10,1 #endif /* CONFIG_PPC_BOOK3E */ @@ -565,10 +558,8 @@ _GLOBAL(ret_from_except_lite) #ifdef CONFIG_PPC_BOOK3E wrteei 0 #else - mfmsr r10 /* Get current interrupt state */ - rldicl r9,r10,48,1 /* clear MSR_EE */ - rotldi r9,r9,16 - mtmsrd r9,1 /* Update machine state */ + ld r10,PACAKMSR(r13) /* Get kernel MSR without EE */ + mtmsrd r10,1 /* Update machine state */ #endif /* CONFIG_PPC_BOOK3E */ #ifdef CONFIG_PREEMPT @@ -591,25 +582,74 @@ _GLOBAL(ret_from_except_lite) ld r4,TI_FLAGS(r9) andi. r0,r4,_TIF_USER_WORK_MASK bne do_work -#endif +#endif /* !CONFIG_PREEMPT */ + .globl fast_exc_return_irq +fast_exc_return_irq: restore: -BEGIN_FW_FTR_SECTION + /* + * This is the main kernel exit path, we first check if we + * have to change our interrupt state. + */ ld r5,SOFTE(r1) -FW_FTR_SECTION_ELSE - b .Liseries_check_pending_irqs -ALT_FW_FTR_SECTION_END_IFCLR(FW_FEATURE_ISERIES) -2: - TRACE_AND_RESTORE_IRQ(r5); + lbz r6,PACASOFTIRQEN(r13) + cmpwi cr1,r5,0 + cmpw cr0,r5,r6 + beq cr0,4f + + /* We do, handle disable first, which is easy */ + bne cr1,3f; + li r0,0 + stb r0,PACASOFTIRQEN(r13); + TRACE_DISABLE_INTS + b 4f - /* extract EE bit and use it to restore paca->hard_enabled */ - ld r3,_MSR(r1) - rldicl r4,r3,49,63 /* r0 = (r3 >> 15) & 1 */ - stb r4,PACAHARDIRQEN(r13) +3: /* + * We are about to soft-enable interrupts (we are hard disabled + * at this point). We check if there's anything that needs to + * be replayed first. + */ + lbz r0,PACAIRQHAPPENED(r13) + cmpwi cr0,r0,0 + bne- restore_check_irq_replay + /* + * Get here when nothing happened while soft-disabled, just + * soft-enable and move-on. We will hard-enable as a side + * effect of rfi + */ +restore_no_replay: + TRACE_ENABLE_INTS + li r0,1 + stb r0,PACASOFTIRQEN(r13); + + /* + * Final return path. BookE is handled in a different file + */ +4: #ifdef CONFIG_PPC_BOOK3E b .exception_return_book3e #else + /* + * Clear the reservation. If we know the CPU tracks the address of + * the reservation then we can potentially save some cycles and use + * a larx. On POWER6 and POWER7 this is significantly faster. + */ +BEGIN_FTR_SECTION + stdcx. r0,0,r1 /* to clear the reservation */ +FTR_SECTION_ELSE + ldarx r4,0,r1 +ALT_FTR_SECTION_END_IFCLR(CPU_FTR_STCX_CHECKS_ADDRESS) + + /* + * Some code path such as load_up_fpu or altivec return directly + * here. They run entirely hard disabled and do not alter the + * interrupt state. They also don't use lwarx/stwcx. and thus + * are known not to leave dangling reservations. + */ + .globl fast_exception_return +fast_exception_return: + ld r3,_MSR(r1) ld r4,_CTR(r1) ld r0,_LINK(r1) mtctr r4 @@ -623,28 +663,18 @@ ALT_FW_FTR_SECTION_END_IFCLR(FW_FEATURE_ISERIES) beq- unrecov_restore /* - * Clear the reservation. If we know the CPU tracks the address of - * the reservation then we can potentially save some cycles and use - * a larx. On POWER6 and POWER7 this is significantly faster. - */ -BEGIN_FTR_SECTION - stdcx. r0,0,r1 /* to clear the reservation */ -FTR_SECTION_ELSE - ldarx r4,0,r1 -ALT_FTR_SECTION_END_IFCLR(CPU_FTR_STCX_CHECKS_ADDRESS) - - /* * Clear RI before restoring r13. If we are returning to * userspace and we take an exception after restoring r13, * we end up corrupting the userspace r13 value. */ - mfmsr r4 - andc r4,r4,r0 /* r0 contains MSR_RI here */ + ld r4,PACAKMSR(r13) /* Get kernel MSR without EE */ + andc r4,r4,r0 /* r0 contains MSR_RI here */ mtmsrd r4,1 /* * r13 is our per cpu area, only restore it if we are returning to - * userspace + * userspace the value stored in the stack frame may belong to + * another CPU. */ andi. r0,r3,MSR_PR beq 1f @@ -669,30 +699,55 @@ ALT_FTR_SECTION_END_IFCLR(CPU_FTR_STCX_CHECKS_ADDRESS) #endif /* CONFIG_PPC_BOOK3E */ -.Liseries_check_pending_irqs: -#ifdef CONFIG_PPC_ISERIES - ld r5,SOFTE(r1) - cmpdi 0,r5,0 - beq 2b - /* Check for pending interrupts (iSeries) */ - ld r3,PACALPPACAPTR(r13) - ld r3,LPPACAANYINT(r3) - cmpdi r3,0 - beq+ 2b /* skip do_IRQ if no interrupts */ - - li r3,0 - stb r3,PACASOFTIRQEN(r13) /* ensure we are soft-disabled */ -#ifdef CONFIG_TRACE_IRQFLAGS - bl .trace_hardirqs_off - mfmsr r10 -#endif - ori r10,r10,MSR_EE - mtmsrd r10 /* hard-enable again */ - addi r3,r1,STACK_FRAME_OVERHEAD - bl .do_IRQ - b .ret_from_except_lite /* loop back and handle more */ -#endif + /* + * Something did happen, check if a re-emit is needed + * (this also clears paca->irq_happened) + */ +restore_check_irq_replay: + /* XXX: We could implement a fast path here where we check + * for irq_happened being just 0x01, in which case we can + * clear it and return. That means that we would potentially + * miss a decrementer having wrapped all the way around. + * + * Still, this might be useful for things like hash_page + */ + bl .__check_irq_replay + cmpwi cr0,r3,0 + beq restore_no_replay + + /* + * We need to re-emit an interrupt. We do so by re-using our + * existing exception frame. We first change the trap value, + * but we need to ensure we preserve the low nibble of it + */ + ld r4,_TRAP(r1) + clrldi r4,r4,60 + or r4,r4,r3 + std r4,_TRAP(r1) + /* + * Then find the right handler and call it. Interrupts are + * still soft-disabled and we keep them that way. + */ + cmpwi cr0,r3,0x500 + bne 1f + addi r3,r1,STACK_FRAME_OVERHEAD; + bl .do_IRQ + b .ret_from_except +1: cmpwi cr0,r3,0x900 + bne 1f + addi r3,r1,STACK_FRAME_OVERHEAD; + bl .timer_interrupt + b .ret_from_except +#ifdef CONFIG_PPC_BOOK3E +1: cmpwi cr0,r3,0x280 + bne 1f + addi r3,r1,STACK_FRAME_OVERHEAD; + bl .doorbell_exception + b .ret_from_except +#endif /* CONFIG_PPC_BOOK3E */ +1: b .ret_from_except /* What else to do here ? */ + do_work: #ifdef CONFIG_PREEMPT andi. r0,r3,MSR_PR /* Returning to user mode? */ @@ -705,31 +760,22 @@ do_work: crandc eq,cr1*4+eq,eq bne restore - /* Here we are preempting the current task. - * - * Ensure interrupts are soft-disabled. We also properly mark - * the PACA to reflect the fact that they are hard-disabled - * and trace the change + /* + * Here we are preempting the current task. We want to make + * sure we are soft-disabled first */ - li r0,0 - stb r0,PACASOFTIRQEN(r13) - stb r0,PACAHARDIRQEN(r13) - TRACE_DISABLE_INTS - - /* Call the scheduler with soft IRQs off */ + SOFT_DISABLE_INTS(r3,r4) 1: bl .preempt_schedule_irq /* Hard-disable interrupts again (and update PACA) */ #ifdef CONFIG_PPC_BOOK3E wrteei 0 #else - mfmsr r10 - rldicl r10,r10,48,1 - rotldi r10,r10,16 + ld r10,PACAKMSR(r13) /* Get kernel MSR without EE */ mtmsrd r10,1 #endif /* CONFIG_PPC_BOOK3E */ - li r0,0 - stb r0,PACAHARDIRQEN(r13) + li r0,PACA_IRQ_HARD_DIS + stb r0,PACAIRQHAPPENED(r13) /* Re-test flags and eventually loop */ clrrdi r9,r1,THREAD_SHIFT @@ -751,14 +797,12 @@ user_work: andi. r0,r4,_TIF_NEED_RESCHED beq 1f - li r5,1 - TRACE_AND_RESTORE_IRQ(r5); + bl .restore_interrupts bl .schedule b .ret_from_except_lite 1: bl .save_nvgprs - li r5,1 - TRACE_AND_RESTORE_IRQ(r5); + bl .restore_interrupts addi r3,r1,STACK_FRAME_OVERHEAD bl .do_notify_resume b .ret_from_except |