diff options
Diffstat (limited to 'arch/powerpc/kernel/head_fsl_booke.S')
| -rw-r--r-- | arch/powerpc/kernel/head_fsl_booke.S | 266 |
1 files changed, 236 insertions, 30 deletions
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S index f45726a1d96..b497188a94a 100644 --- a/arch/powerpc/kernel/head_fsl_booke.S +++ b/arch/powerpc/kernel/head_fsl_booke.S @@ -65,29 +65,78 @@ _ENTRY(_start); nop /* Translate device tree address to physical, save in r30/r31 */ - mfmsr r16 - mfspr r17,SPRN_PID - rlwinm r17,r17,16,0x3fff0000 /* turn PID into MAS6[SPID] */ - rlwimi r17,r16,28,0x00000001 /* turn MSR[DS] into MAS6[SAS] */ - mtspr SPRN_MAS6,r17 - - tlbsx 0,r3 /* must succeed */ - - mfspr r16,SPRN_MAS1 - mfspr r20,SPRN_MAS3 - rlwinm r17,r16,25,0x1f /* r17 = log2(page size) */ - li r18,1024 - slw r18,r18,r17 /* r18 = page size */ - addi r18,r18,-1 - and r19,r3,r18 /* r19 = page offset */ - andc r31,r20,r18 /* r31 = page base */ - or r31,r31,r19 /* r31 = devtree phys addr */ - mfspr r30,SPRN_MAS7 + bl get_phys_addr + mr r30,r3 + mr r31,r4 li r25,0 /* phys kernel start (low) */ li r24,0 /* CPU number */ li r23,0 /* phys kernel start (high) */ +#ifdef CONFIG_RELOCATABLE + LOAD_REG_ADDR_PIC(r3, _stext) /* Get our current runtime base */ + + /* Translate _stext address to physical, save in r23/r25 */ + bl get_phys_addr + mr r23,r3 + mr r25,r4 + + bl 0f +0: mflr r8 + addis r3,r8,(is_second_reloc - 0b)@ha + lwz r19,(is_second_reloc - 0b)@l(r3) + + /* Check if this is the second relocation. */ + cmpwi r19,1 + bne 1f + + /* + * For the second relocation, we already get the real memstart_addr + * from device tree. So we will map PAGE_OFFSET to memstart_addr, + * then the virtual address of start kernel should be: + * PAGE_OFFSET + (kernstart_addr - memstart_addr) + * Since the offset between kernstart_addr and memstart_addr should + * never be beyond 1G, so we can just use the lower 32bit of them + * for the calculation. + */ + lis r3,PAGE_OFFSET@h + + addis r4,r8,(kernstart_addr - 0b)@ha + addi r4,r4,(kernstart_addr - 0b)@l + lwz r5,4(r4) + + addis r6,r8,(memstart_addr - 0b)@ha + addi r6,r6,(memstart_addr - 0b)@l + lwz r7,4(r6) + + subf r5,r7,r5 + add r3,r3,r5 + b 2f + +1: + /* + * We have the runtime (virutal) address of our base. + * We calculate our shift of offset from a 64M page. + * We could map the 64M page we belong to at PAGE_OFFSET and + * get going from there. + */ + lis r4,KERNELBASE@h + ori r4,r4,KERNELBASE@l + rlwinm r6,r25,0,0x3ffffff /* r6 = PHYS_START % 64M */ + rlwinm r5,r4,0,0x3ffffff /* r5 = KERNELBASE % 64M */ + subf r3,r5,r6 /* r3 = r6 - r5 */ + add r3,r4,r3 /* Required Virtual Address */ + +2: bl relocate + + /* + * For the second relocation, we already set the right tlb entries + * for the kernel space, so skip the code in fsl_booke_entry_mapping.S + */ + cmpwi r19,1 + beq set_ivor +#endif + /* We try to not make any assumptions about how the boot loader * setup or used the TLBs. We invalidate all mappings from the * boot loader and load a single entry in TLB1[0] to map the @@ -113,6 +162,7 @@ _ENTRY(__early_start) #include "fsl_booke_entry_mapping.S" #undef ENTRY_MAPPING_BOOT_SETUP +set_ivor: /* Establish the interrupt vector offsets */ SET_IVOR(0, CriticalInput); SET_IVOR(1, MachineCheck); @@ -166,8 +216,7 @@ _ENTRY(__early_start) /* Check to see if we're the second processor, and jump * to the secondary_start code if so */ - lis r24, boot_cpuid@h - ori r24, r24, boot_cpuid@l + LOAD_REG_ADDR_PIC(r24, boot_cpuid) lwz r24, 0(r24) cmpwi r24, -1 mfspr r24,SPRN_PIR @@ -197,6 +246,18 @@ _ENTRY(__early_start) bl early_init +#ifdef CONFIG_RELOCATABLE + mr r3,r30 + mr r4,r31 +#ifdef CONFIG_PHYS_64BIT + mr r5,r23 + mr r6,r25 +#else + mr r5,r25 +#endif + bl relocate_init +#endif + #ifdef CONFIG_DYNAMIC_MEMSTART lis r3,kernstart_addr@ha la r3,kernstart_addr@l(r3) @@ -856,6 +917,33 @@ KernelSPE: #endif /* CONFIG_SPE */ /* + * Translate the effec addr in r3 to phys addr. The phys addr will be put + * into r3(higher 32bit) and r4(lower 32bit) + */ +get_phys_addr: + mfmsr r8 + mfspr r9,SPRN_PID + rlwinm r9,r9,16,0x3fff0000 /* turn PID into MAS6[SPID] */ + rlwimi r9,r8,28,0x00000001 /* turn MSR[DS] into MAS6[SAS] */ + mtspr SPRN_MAS6,r9 + + tlbsx 0,r3 /* must succeed */ + + mfspr r8,SPRN_MAS1 + mfspr r12,SPRN_MAS3 + rlwinm r9,r8,25,0x1f /* r9 = log2(page size) */ + li r10,1024 + slw r10,r10,r9 /* r10 = page size */ + addi r10,r10,-1 + and r11,r3,r10 /* r11 = page offset */ + andc r4,r12,r10 /* r4 = page base */ + or r4,r4,r11 /* r4 = devtree phys addr */ +#ifdef CONFIG_PHYS_64BIT + mfspr r3,SPRN_MAS7 +#endif + blr + +/* * Global functions */ @@ -1057,24 +1145,36 @@ _GLOBAL(__flush_disable_L1) /* When we get here, r24 needs to hold the CPU # */ .globl __secondary_start __secondary_start: - lis r3,__secondary_hold_acknowledge@h - ori r3,r3,__secondary_hold_acknowledge@l - stw r24,0(r3) - - li r3,0 - mr r4,r24 /* Why? */ - bl call_setup_cpu - - lis r3,tlbcam_index@ha - lwz r3,tlbcam_index@l(r3) + LOAD_REG_ADDR_PIC(r3, tlbcam_index) + lwz r3,0(r3) mtctr r3 li r26,0 /* r26 safe? */ + bl switch_to_as1 + mr r27,r3 /* tlb entry */ /* Load each CAM entry */ 1: mr r3,r26 bl loadcam_entry addi r26,r26,1 bdnz 1b + mr r3,r27 /* tlb entry */ + LOAD_REG_ADDR_PIC(r4, memstart_addr) + lwz r4,0(r4) + mr r5,r25 /* phys kernel start */ + rlwinm r5,r5,0,~0x3ffffff /* aligned 64M */ + subf r4,r5,r4 /* memstart_addr - phys kernel start */ + li r5,0 /* no device tree */ + li r6,0 /* not boot cpu */ + bl restore_to_as0 + + + lis r3,__secondary_hold_acknowledge@h + ori r3,r3,__secondary_hold_acknowledge@l + stw r24,0(r3) + + li r3,0 + mr r4,r24 /* Why? */ + bl call_setup_cpu /* get current_thread_info and current */ lis r1,secondary_ti@ha @@ -1111,6 +1211,112 @@ __secondary_hold_acknowledge: #endif /* + * Create a tlb entry with the same effective and physical address as + * the tlb entry used by the current running code. But set the TS to 1. + * Then switch to the address space 1. It will return with the r3 set to + * the ESEL of the new created tlb. + */ +_GLOBAL(switch_to_as1) + mflr r5 + + /* Find a entry not used */ + mfspr r3,SPRN_TLB1CFG + andi. r3,r3,0xfff + mfspr r4,SPRN_PID + rlwinm r4,r4,16,0x3fff0000 /* turn PID into MAS6[SPID] */ + mtspr SPRN_MAS6,r4 +1: lis r4,0x1000 /* Set MAS0(TLBSEL) = 1 */ + addi r3,r3,-1 + rlwimi r4,r3,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r3) */ + mtspr SPRN_MAS0,r4 + tlbre + mfspr r4,SPRN_MAS1 + andis. r4,r4,MAS1_VALID@h + bne 1b + + /* Get the tlb entry used by the current running code */ + bl 0f +0: mflr r4 + tlbsx 0,r4 + + mfspr r4,SPRN_MAS1 + ori r4,r4,MAS1_TS /* Set the TS = 1 */ + mtspr SPRN_MAS1,r4 + + mfspr r4,SPRN_MAS0 + rlwinm r4,r4,0,~MAS0_ESEL_MASK + rlwimi r4,r3,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r3) */ + mtspr SPRN_MAS0,r4 + tlbwe + isync + sync + + mfmsr r4 + ori r4,r4,MSR_IS | MSR_DS + mtspr SPRN_SRR0,r5 + mtspr SPRN_SRR1,r4 + sync + rfi + +/* + * Restore to the address space 0 and also invalidate the tlb entry created + * by switch_to_as1. + * r3 - the tlb entry which should be invalidated + * r4 - __pa(PAGE_OFFSET in AS1) - __pa(PAGE_OFFSET in AS0) + * r5 - device tree virtual address. If r4 is 0, r5 is ignored. + * r6 - boot cpu +*/ +_GLOBAL(restore_to_as0) + mflr r0 + + bl 0f +0: mflr r9 + addi r9,r9,1f - 0b + + /* + * We may map the PAGE_OFFSET in AS0 to a different physical address, + * so we need calculate the right jump and device tree address based + * on the offset passed by r4. + */ + add r9,r9,r4 + add r5,r5,r4 + add r0,r0,r4 + +2: mfmsr r7 + li r8,(MSR_IS | MSR_DS) + andc r7,r7,r8 + + mtspr SPRN_SRR0,r9 + mtspr SPRN_SRR1,r7 + sync + rfi + + /* Invalidate the temporary tlb entry for AS1 */ +1: lis r9,0x1000 /* Set MAS0(TLBSEL) = 1 */ + rlwimi r9,r3,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r3) */ + mtspr SPRN_MAS0,r9 + tlbre + mfspr r9,SPRN_MAS1 + rlwinm r9,r9,0,2,31 /* Clear MAS1 Valid and IPPROT */ + mtspr SPRN_MAS1,r9 + tlbwe + isync + + cmpwi r4,0 + cmpwi cr1,r6,0 + cror eq,4*cr1+eq,eq + bne 3f /* offset != 0 && is_boot_cpu */ + mtlr r0 + blr + + /* + * The PAGE_OFFSET will map to a different physical address, + * jump to _start to do another relocation again. + */ +3: mr r3,r5 + bl _start + +/* * We put a few things here that have to be page-aligned. This stuff * goes at the beginning of the data segment, which is page-aligned. */ |