diff options
Diffstat (limited to 'arch/powerpc/kernel/misc_32.S')
| -rw-r--r-- | arch/powerpc/kernel/misc_32.S | 1039 |
1 files changed, 1039 insertions, 0 deletions
diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S new file mode 100644 index 00000000000..fa8c20ffec7 --- /dev/null +++ b/arch/powerpc/kernel/misc_32.S @@ -0,0 +1,1039 @@ +/* + * This file contains miscellaneous low-level functions. + * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) + * + * Largely rewritten by Cort Dougan (cort@cs.nmt.edu) + * and Paul Mackerras. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ + +#include <linux/config.h> +#include <linux/sys.h> +#include <asm/unistd.h> +#include <asm/errno.h> +#include <asm/reg.h> +#include <asm/page.h> +#include <asm/cache.h> +#include <asm/cputable.h> +#include <asm/mmu.h> +#include <asm/ppc_asm.h> +#include <asm/thread_info.h> +#include <asm/asm-offsets.h> + + .text + + .align 5 +_GLOBAL(__delay) + cmpwi 0,r3,0 + mtctr r3 + beqlr +1: bdnz 1b + blr + +/* + * Returns (address we're running at) - (address we were linked at) + * for use before the text and data are mapped to KERNELBASE. + */ +_GLOBAL(reloc_offset) + mflr r0 + bl 1f +1: mflr r3 + lis r4,1b@ha + addi r4,r4,1b@l + subf r3,r4,r3 + mtlr r0 + blr + +/* + * add_reloc_offset(x) returns x + reloc_offset(). + */ +_GLOBAL(add_reloc_offset) + mflr r0 + bl 1f +1: mflr r5 + lis r4,1b@ha + addi r4,r4,1b@l + subf r5,r4,r5 + add r3,r3,r5 + mtlr r0 + blr + +/* + * sub_reloc_offset(x) returns x - reloc_offset(). + */ +_GLOBAL(sub_reloc_offset) + mflr r0 + bl 1f +1: mflr r5 + lis r4,1b@ha + addi r4,r4,1b@l + subf r5,r4,r5 + subf r3,r5,r3 + mtlr r0 + blr + +/* + * reloc_got2 runs through the .got2 section adding an offset + * to each entry. + */ +_GLOBAL(reloc_got2) + mflr r11 + lis r7,__got2_start@ha + addi r7,r7,__got2_start@l + lis r8,__got2_end@ha + addi r8,r8,__got2_end@l + subf r8,r7,r8 + srwi. r8,r8,2 + beqlr + mtctr r8 + bl 1f +1: mflr r0 + lis r4,1b@ha + addi r4,r4,1b@l + subf r0,r4,r0 + add r7,r0,r7 +2: lwz r0,0(r7) + add r0,r0,r3 + stw r0,0(r7) + addi r7,r7,4 + bdnz 2b + mtlr r11 + blr + +/* + * identify_cpu, + * called with r3 = data offset and r4 = CPU number + * doesn't change r3 + */ +_GLOBAL(identify_cpu) + addis r8,r3,cpu_specs@ha + addi r8,r8,cpu_specs@l + mfpvr r7 +1: + lwz r5,CPU_SPEC_PVR_MASK(r8) + and r5,r5,r7 + lwz r6,CPU_SPEC_PVR_VALUE(r8) + cmplw 0,r6,r5 + beq 1f + addi r8,r8,CPU_SPEC_ENTRY_SIZE + b 1b +1: + addis r6,r3,cur_cpu_spec@ha + addi r6,r6,cur_cpu_spec@l + sub r8,r8,r3 + stw r8,0(r6) + blr + +/* + * do_cpu_ftr_fixups - goes through the list of CPU feature fixups + * and writes nop's over sections of code that don't apply for this cpu. + * r3 = data offset (not changed) + */ +_GLOBAL(do_cpu_ftr_fixups) + /* Get CPU 0 features */ + addis r6,r3,cur_cpu_spec@ha + addi r6,r6,cur_cpu_spec@l + lwz r4,0(r6) + add r4,r4,r3 + lwz r4,CPU_SPEC_FEATURES(r4) + + /* Get the fixup table */ + addis r6,r3,__start___ftr_fixup@ha + addi r6,r6,__start___ftr_fixup@l + addis r7,r3,__stop___ftr_fixup@ha + addi r7,r7,__stop___ftr_fixup@l + + /* Do the fixup */ +1: cmplw 0,r6,r7 + bgelr + addi r6,r6,16 + lwz r8,-16(r6) /* mask */ + and r8,r8,r4 + lwz r9,-12(r6) /* value */ + cmplw 0,r8,r9 + beq 1b + lwz r8,-8(r6) /* section begin */ + lwz r9,-4(r6) /* section end */ + subf. r9,r8,r9 + beq 1b + /* write nops over the section of code */ + /* todo: if large section, add a branch at the start of it */ + srwi r9,r9,2 + mtctr r9 + add r8,r8,r3 + lis r0,0x60000000@h /* nop */ +3: stw r0,0(r8) + andi. r10,r4,CPU_FTR_SPLIT_ID_CACHE@l + beq 2f + dcbst 0,r8 /* suboptimal, but simpler */ + sync + icbi 0,r8 +2: addi r8,r8,4 + bdnz 3b + sync /* additional sync needed on g4 */ + isync + b 1b + +/* + * call_setup_cpu - call the setup_cpu function for this cpu + * r3 = data offset, r24 = cpu number + * + * Setup function is called with: + * r3 = data offset + * r4 = ptr to CPU spec (relocated) + */ +_GLOBAL(call_setup_cpu) + addis r4,r3,cur_cpu_spec@ha + addi r4,r4,cur_cpu_spec@l + lwz r4,0(r4) + add r4,r4,r3 + lwz r5,CPU_SPEC_SETUP(r4) + cmpi 0,r5,0 + add r5,r5,r3 + beqlr + mtctr r5 + bctr + +#if defined(CONFIG_CPU_FREQ_PMAC) && defined(CONFIG_6xx) + +/* This gets called by via-pmu.c to switch the PLL selection + * on 750fx CPU. This function should really be moved to some + * other place (as most of the cpufreq code in via-pmu + */ +_GLOBAL(low_choose_750fx_pll) + /* Clear MSR:EE */ + mfmsr r7 + rlwinm r0,r7,0,17,15 + mtmsr r0 + + /* If switching to PLL1, disable HID0:BTIC */ + cmplwi cr0,r3,0 + beq 1f + mfspr r5,SPRN_HID0 + rlwinm r5,r5,0,27,25 + sync + mtspr SPRN_HID0,r5 + isync + sync + +1: + /* Calc new HID1 value */ + mfspr r4,SPRN_HID1 /* Build a HID1:PS bit from parameter */ + rlwinm r5,r3,16,15,15 /* Clear out HID1:PS from value read */ + rlwinm r4,r4,0,16,14 /* Could have I used rlwimi here ? */ + or r4,r4,r5 + mtspr SPRN_HID1,r4 + + /* Store new HID1 image */ + rlwinm r6,r1,0,0,18 + lwz r6,TI_CPU(r6) + slwi r6,r6,2 + addis r6,r6,nap_save_hid1@ha + stw r4,nap_save_hid1@l(r6) + + /* If switching to PLL0, enable HID0:BTIC */ + cmplwi cr0,r3,0 + bne 1f + mfspr r5,SPRN_HID0 + ori r5,r5,HID0_BTIC + sync + mtspr SPRN_HID0,r5 + isync + sync + +1: + /* Return */ + mtmsr r7 + blr + +_GLOBAL(low_choose_7447a_dfs) + /* Clear MSR:EE */ + mfmsr r7 + rlwinm r0,r7,0,17,15 + mtmsr r0 + + /* Calc new HID1 value */ + mfspr r4,SPRN_HID1 + insrwi r4,r3,1,9 /* insert parameter into bit 9 */ + sync + mtspr SPRN_HID1,r4 + sync + isync + + /* Return */ + mtmsr r7 + blr + +#endif /* CONFIG_CPU_FREQ_PMAC && CONFIG_6xx */ + +/* + * complement mask on the msr then "or" some values on. + * _nmask_and_or_msr(nmask, value_to_or) + */ +_GLOBAL(_nmask_and_or_msr) + mfmsr r0 /* Get current msr */ + andc r0,r0,r3 /* And off the bits set in r3 (first parm) */ + or r0,r0,r4 /* Or on the bits in r4 (second parm) */ + SYNC /* Some chip revs have problems here... */ + mtmsr r0 /* Update machine state */ + isync + blr /* Done */ + + +/* + * Flush MMU TLB + */ +_GLOBAL(_tlbia) +#if defined(CONFIG_40x) + sync /* Flush to memory before changing mapping */ + tlbia + isync /* Flush shadow TLB */ +#elif defined(CONFIG_44x) + li r3,0 + sync + + /* Load high watermark */ + lis r4,tlb_44x_hwater@ha + lwz r5,tlb_44x_hwater@l(r4) + +1: tlbwe r3,r3,PPC44x_TLB_PAGEID + addi r3,r3,1 + cmpw 0,r3,r5 + ble 1b + + isync +#elif defined(CONFIG_FSL_BOOKE) + /* Invalidate all entries in TLB0 */ + li r3, 0x04 + tlbivax 0,3 + /* Invalidate all entries in TLB1 */ + li r3, 0x0c + tlbivax 0,3 + /* Invalidate all entries in TLB2 */ + li r3, 0x14 + tlbivax 0,3 + /* Invalidate all entries in TLB3 */ + li r3, 0x1c + tlbivax 0,3 + msync +#ifdef CONFIG_SMP + tlbsync +#endif /* CONFIG_SMP */ +#else /* !(CONFIG_40x || CONFIG_44x || CONFIG_FSL_BOOKE) */ +#if defined(CONFIG_SMP) + rlwinm r8,r1,0,0,18 + lwz r8,TI_CPU(r8) + oris r8,r8,10 + mfmsr r10 + SYNC + rlwinm r0,r10,0,17,15 /* clear bit 16 (MSR_EE) */ + rlwinm r0,r0,0,28,26 /* clear DR */ + mtmsr r0 + SYNC_601 + isync + lis r9,mmu_hash_lock@h + ori r9,r9,mmu_hash_lock@l + tophys(r9,r9) +10: lwarx r7,0,r9 + cmpwi 0,r7,0 + bne- 10b + stwcx. r8,0,r9 + bne- 10b + sync + tlbia + sync + TLBSYNC + li r0,0 + stw r0,0(r9) /* clear mmu_hash_lock */ + mtmsr r10 + SYNC_601 + isync +#else /* CONFIG_SMP */ + sync + tlbia + sync +#endif /* CONFIG_SMP */ +#endif /* ! defined(CONFIG_40x) */ + blr + +/* + * Flush MMU TLB for a particular address + */ +_GLOBAL(_tlbie) +#if defined(CONFIG_40x) + tlbsx. r3, 0, r3 + bne 10f + sync + /* There are only 64 TLB entries, so r3 < 64, which means bit 25 is clear. + * Since 25 is the V bit in the TLB_TAG, loading this value will invalidate + * the TLB entry. */ + tlbwe r3, r3, TLB_TAG + isync +10: +#elif defined(CONFIG_44x) + mfspr r4,SPRN_MMUCR + mfspr r5,SPRN_PID /* Get PID */ + rlwimi r4,r5,0,24,31 /* Set TID */ + mtspr SPRN_MMUCR,r4 + + tlbsx. r3, 0, r3 + bne 10f + sync + /* There are only 64 TLB entries, so r3 < 64, + * which means bit 22, is clear. Since 22 is + * the V bit in the TLB_PAGEID, loading this + * value will invalidate the TLB entry. + */ + tlbwe r3, r3, PPC44x_TLB_PAGEID + isync +10: +#elif defined(CONFIG_FSL_BOOKE) + rlwinm r4, r3, 0, 0, 19 + ori r5, r4, 0x08 /* TLBSEL = 1 */ + ori r6, r4, 0x10 /* TLBSEL = 2 */ + ori r7, r4, 0x18 /* TLBSEL = 3 */ + tlbivax 0, r4 + tlbivax 0, r5 + tlbivax 0, r6 + tlbivax 0, r7 + msync +#if defined(CONFIG_SMP) + tlbsync +#endif /* CONFIG_SMP */ +#else /* !(CONFIG_40x || CONFIG_44x || CONFIG_FSL_BOOKE) */ +#if defined(CONFIG_SMP) + rlwinm r8,r1,0,0,18 + lwz r8,TI_CPU(r8) + oris r8,r8,11 + mfmsr r10 + SYNC + rlwinm r0,r10,0,17,15 /* clear bit 16 (MSR_EE) */ + rlwinm r0,r0,0,28,26 /* clear DR */ + mtmsr r0 + SYNC_601 + isync + lis r9,mmu_hash_lock@h + ori r9,r9,mmu_hash_lock@l + tophys(r9,r9) +10: lwarx r7,0,r9 + cmpwi 0,r7,0 + bne- 10b + stwcx. r8,0,r9 + bne- 10b + eieio + tlbie r3 + sync + TLBSYNC + li r0,0 + stw r0,0(r9) /* clear mmu_hash_lock */ + mtmsr r10 + SYNC_601 + isync +#else /* CONFIG_SMP */ + tlbie r3 + sync +#endif /* CONFIG_SMP */ +#endif /* ! CONFIG_40x */ + blr + +/* + * Flush instruction cache. + * This is a no-op on the 601. + */ +_GLOBAL(flush_instruction_cache) +#if defined(CONFIG_8xx) + isync + lis r5, IDC_INVALL@h + mtspr SPRN_IC_CST, r5 +#elif defined(CONFIG_4xx) +#ifdef CONFIG_403GCX + li r3, 512 + mtctr r3 + lis r4, KERNELBASE@h +1: iccci 0, r4 + addi r4, r4, 16 + bdnz 1b +#else + lis r3, KERNELBASE@h + iccci 0,r3 +#endif +#elif CONFIG_FSL_BOOKE +BEGIN_FTR_SECTION + mfspr r3,SPRN_L1CSR0 + ori r3,r3,L1CSR0_CFI|L1CSR0_CLFC + /* msync; isync recommended here */ + mtspr SPRN_L1CSR0,r3 + isync + blr +END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE) + mfspr r3,SPRN_L1CSR1 + ori r3,r3,L1CSR1_ICFI|L1CSR1_ICLFR + mtspr SPRN_L1CSR1,r3 +#else + mfspr r3,SPRN_PVR + rlwinm r3,r3,16,16,31 + cmpwi 0,r3,1 + beqlr /* for 601, do nothing */ + /* 603/604 processor - use invalidate-all bit in HID0 */ + mfspr r3,SPRN_HID0 + ori r3,r3,HID0_ICFI + mtspr SPRN_HID0,r3 +#endif /* CONFIG_8xx/4xx */ + isync + blr + +/* + * Write any modified data cache blocks out to memory + * and invalidate the corresponding instruction cache blocks. + * This is a no-op on the 601. + * + * flush_icache_range(unsigned long start, unsigned long stop) + */ +_GLOBAL(flush_icache_range) +BEGIN_FTR_SECTION + blr /* for 601, do nothing */ +END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE) + li r5,L1_CACHE_LINE_SIZE-1 + andc r3,r3,r5 + subf r4,r3,r4 + add r4,r4,r5 + srwi. r4,r4,LG_L1_CACHE_LINE_SIZE + beqlr + mtctr r4 + mr r6,r3 +1: dcbst 0,r3 + addi r3,r3,L1_CACHE_LINE_SIZE + bdnz 1b + sync /* wait for dcbst's to get to ram */ + mtctr r4 +2: icbi 0,r6 + addi r6,r6,L1_CACHE_LINE_SIZE + bdnz 2b + sync /* additional sync needed on g4 */ + isync + blr +/* + * Write any modified data cache blocks out to memory. + * Does not invalidate the corresponding cache lines (especially for + * any corresponding instruction cache). + * + * clean_dcache_range(unsigned long start, unsigned long stop) + */ +_GLOBAL(clean_dcache_range) + li r5,L1_CACHE_LINE_SIZE-1 + andc r3,r3,r5 + subf r4,r3,r4 + add r4,r4,r5 + srwi. r4,r4,LG_L1_CACHE_LINE_SIZE + beqlr + mtctr r4 + +1: dcbst 0,r3 + addi r3,r3,L1_CACHE_LINE_SIZE + bdnz 1b + sync /* wait for dcbst's to get to ram */ + blr + +/* + * Write any modified data cache blocks out to memory and invalidate them. + * Does not invalidate the corresponding instruction cache blocks. + * + * flush_dcache_range(unsigned long start, unsigned long stop) + */ +_GLOBAL(flush_dcache_range) + li r5,L1_CACHE_LINE_SIZE-1 + andc r3,r3,r5 + subf r4,r3,r4 + add r4,r4,r5 + srwi. r4,r4,LG_L1_CACHE_LINE_SIZE + beqlr + mtctr r4 + +1: dcbf 0,r3 + addi r3,r3,L1_CACHE_LINE_SIZE + bdnz 1b + sync /* wait for dcbst's to get to ram */ + blr + +/* + * Like above, but invalidate the D-cache. This is used by the 8xx + * to invalidate the cache so the PPC core doesn't get stale data + * from the CPM (no cache snooping here :-). + * + * invalidate_dcache_range(unsigned long start, unsigned long stop) + */ +_GLOBAL(invalidate_dcache_range) + li r5,L1_CACHE_LINE_SIZE-1 + andc r3,r3,r5 + subf r4,r3,r4 + add r4,r4,r5 + srwi. r4,r4,LG_L1_CACHE_LINE_SIZE + beqlr + mtctr r4 + +1: dcbi 0,r3 + addi r3,r3,L1_CACHE_LINE_SIZE + bdnz 1b + sync /* wait for dcbi's to get to ram */ + blr + +#ifdef CONFIG_NOT_COHERENT_CACHE +/* + * 40x cores have 8K or 16K dcache and 32 byte line size. + * 44x has a 32K dcache and 32 byte line size. + * 8xx has 1, 2, 4, 8K variants. + * For now, cover the worst case of the 44x. + * Must be called with external interrupts disabled. + */ +#define CACHE_NWAYS 64 +#define CACHE_NLINES 16 + +_GLOBAL(flush_dcache_all) + li r4, (2 * CACHE_NWAYS * CACHE_NLINES) + mtctr r4 + lis r5, KERNELBASE@h +1: lwz r3, 0(r5) /* Load one word from every line */ + addi r5, r5, L1_CACHE_LINE_SIZE + bdnz 1b + blr +#endif /* CONFIG_NOT_COHERENT_CACHE */ + +/* + * Flush a particular page from the data cache to RAM. + * Note: this is necessary because the instruction cache does *not* + * snoop from the data cache. + * This is a no-op on the 601 which has a unified cache. + * + * void __flush_dcache_icache(void *page) + */ +_GLOBAL(__flush_dcache_icache) +BEGIN_FTR_SECTION + blr /* for 601, do nothing */ +END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE) + rlwinm r3,r3,0,0,19 /* Get page base address */ + li r4,4096/L1_CACHE_LINE_SIZE /* Number of lines in a page */ + mtctr r4 + mr r6,r3 +0: dcbst 0,r3 /* Write line to ram */ + addi r3,r3,L1_CACHE_LINE_SIZE + bdnz 0b + sync + mtctr r4 +1: icbi 0,r6 + addi r6,r6,L1_CACHE_LINE_SIZE + bdnz 1b + sync + isync + blr + +/* + * Flush a particular page from the data cache to RAM, identified + * by its physical address. We turn off the MMU so we can just use + * the physical address (this may be a highmem page without a kernel + * mapping). + * + * void __flush_dcache_icache_phys(unsigned long physaddr) + */ +_GLOBAL(__flush_dcache_icache_phys) +BEGIN_FTR_SECTION + blr /* for 601, do nothing */ +END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE) + mfmsr r10 + rlwinm r0,r10,0,28,26 /* clear DR */ + mtmsr r0 + isync + rlwinm r3,r3,0,0,19 /* Get page base address */ + li r4,4096/L1_CACHE_LINE_SIZE /* Number of lines in a page */ + mtctr r4 + mr r6,r3 +0: dcbst 0,r3 /* Write line to ram */ + addi r3,r3,L1_CACHE_LINE_SIZE + bdnz 0b + sync + mtctr r4 +1: icbi 0,r6 + addi r6,r6,L1_CACHE_LINE_SIZE + bdnz 1b + sync + mtmsr r10 /* restore DR */ + isync + blr + +/* + * Clear pages using the dcbz instruction, which doesn't cause any + * memory traffic (except to write out any cache lines which get + * displaced). This only works on cacheable memory. + * + * void clear_pages(void *page, int order) ; + */ +_GLOBAL(clear_pages) + li r0,4096/L1_CACHE_LINE_SIZE + slw r0,r0,r4 + mtctr r0 +#ifdef CONFIG_8xx + li r4, 0 +1: stw r4, 0(r3) + stw r4, 4(r3) + stw r4, 8(r3) + stw r4, 12(r3) +#else +1: dcbz 0,r3 +#endif + addi r3,r3,L1_CACHE_LINE_SIZE + bdnz 1b + blr + +/* + * Copy a whole page. We use the dcbz instruction on the destination + * to reduce memory traffic (it eliminates the unnecessary reads of + * the destination into cache). This requires that the destination + * is cacheable. + */ +#define COPY_16_BYTES \ + lwz r6,4(r4); \ + lwz r7,8(r4); \ + lwz r8,12(r4); \ + lwzu r9,16(r4); \ + stw r6,4(r3); \ + stw r7,8(r3); \ + stw r8,12(r3); \ + stwu r9,16(r3) + +_GLOBAL(copy_page) + addi r3,r3,-4 + addi r4,r4,-4 + +#ifdef CONFIG_8xx + /* don't use prefetch on 8xx */ + li r0,4096/L1_CACHE_LINE_SIZE + mtctr r0 +1: COPY_16_BYTES + bdnz 1b + blr + +#else /* not 8xx, we can prefetch */ + li r5,4 + +#if MAX_COPY_PREFETCH > 1 + li r0,MAX_COPY_PREFETCH + li r11,4 + mtctr r0 +11: dcbt r11,r4 + addi r11,r11,L1_CACHE_LINE_SIZE + bdnz 11b +#else /* MAX_COPY_PREFETCH == 1 */ + dcbt r5,r4 + li r11,L1_CACHE_LINE_SIZE+4 +#endif /* MAX_COPY_PREFETCH */ + li r0,4096/L1_CACHE_LINE_SIZE - MAX_COPY_PREFETCH + crclr 4*cr0+eq +2: + mtctr r0 +1: + dcbt r11,r4 + dcbz r5,r3 + COPY_16_BYTES +#if L1_CACHE_LINE_SIZE >= 32 + COPY_16_BYTES +#if L1_CACHE_LINE_SIZE >= 64 + COPY_16_BYTES + COPY_16_BYTES +#if L1_CACHE_LINE_SIZE >= 128 + COPY_16_BYTES + COPY_16_BYTES + COPY_16_BYTES + COPY_16_BYTES +#endif +#endif +#endif + bdnz 1b + beqlr + crnot 4*cr0+eq,4*cr0+eq + li r0,MAX_COPY_PREFETCH + li r11,4 + b 2b +#endif /* CONFIG_8xx */ + +/* + * void atomic_clear_mask(atomic_t mask, atomic_t *addr) + * void atomic_set_mask(atomic_t mask, atomic_t *addr); + */ +_GLOBAL(atomic_clear_mask) +10: lwarx r5,0,r4 + andc r5,r5,r3 + PPC405_ERR77(0,r4) + stwcx. r5,0,r4 + bne- 10b + blr +_GLOBAL(atomic_set_mask) +10: lwarx r5,0,r4 + or r5,r5,r3 + PPC405_ERR77(0,r4) + stwcx. r5,0,r4 + bne- 10b + blr + +/* + * I/O string operations + * + * insb(port, buf, len) + * outsb(port, buf, len) + * insw(port, buf, len) + * outsw(port, buf, len) + * insl(port, buf, len) + * outsl(port, buf, len) + * insw_ns(port, buf, len) + * outsw_ns(port, buf, len) + * insl_ns(port, buf, len) + * outsl_ns(port, buf, len) + * + * The *_ns versions don't do byte-swapping. + */ +_GLOBAL(_insb) + cmpwi 0,r5,0 + mtctr r5 + subi r4,r4,1 + blelr- +00: lbz r5,0(r3) + eieio + stbu r5,1(r4) + bdnz 00b + blr + +_GLOBAL(_outsb) + cmpwi 0,r5,0 + mtctr r5 + subi r4,r4,1 + blelr- +00: lbzu r5,1(r4) + stb r5,0(r3) + eieio + bdnz 00b + blr + +_GLOBAL(_insw) + cmpwi 0,r5,0 + mtctr r5 + subi r4,r4,2 + blelr- +00: lhbrx r5,0,r3 + eieio + sthu r5,2(r4) + bdnz 00b + blr + +_GLOBAL(_outsw) + cmpwi 0,r5,0 + mtctr r5 + subi r4,r4,2 + blelr- +00: lhzu r5,2(r4) + eieio + sthbrx r5,0,r3 + bdnz 00b + blr + +_GLOBAL(_insl) + cmpwi 0,r5,0 + mtctr r5 + subi r4,r4,4 + blelr- +00: lwbrx r5,0,r3 + eieio + stwu r5,4(r4) + bdnz 00b + blr + +_GLOBAL(_outsl) + cmpwi 0,r5,0 + mtctr r5 + subi r4,r4,4 + blelr- +00: lwzu r5,4(r4) + stwbrx r5,0,r3 + eieio + bdnz 00b + blr + +_GLOBAL(__ide_mm_insw) +_GLOBAL(_insw_ns) + cmpwi 0,r5,0 + mtctr r5 + subi r4,r4,2 + blelr- +00: lhz r5,0(r3) + eieio + sthu r5,2(r4) + bdnz 00b + blr + +_GLOBAL(__ide_mm_outsw) +_GLOBAL(_outsw_ns) + cmpwi 0,r5,0 + mtctr r5 + subi r4,r4,2 + blelr- +00: lhzu r5,2(r4) + sth r5,0(r3) + eieio + bdnz 00b + blr + +_GLOBAL(__ide_mm_insl) +_GLOBAL(_insl_ns) + cmpwi 0,r5,0 + mtctr r5 + subi r4,r4,4 + blelr- +00: lwz r5,0(r3) + eieio + stwu r5,4(r4) + bdnz 00b + blr + +_GLOBAL(__ide_mm_outsl) +_GLOBAL(_outsl_ns) + cmpwi 0,r5,0 + mtctr r5 + subi r4,r4,4 + blelr- +00: lwzu r5,4(r4) + stw r5,0(r3) + eieio + bdnz 00b + blr + +/* + * Extended precision shifts. + * + * Updated to be valid for shift counts from 0 to 63 inclusive. + * -- Gabriel + * + * R3/R4 has 64 bit value + * R5 has shift count + * result in R3/R4 + * + * ashrdi3: arithmetic right shift (sign propagation) + * lshrdi3: logical right shift + * ashldi3: left shift + */ +_GLOBAL(__ashrdi3) + subfic r6,r5,32 + srw r4,r4,r5 # LSW = count > 31 ? 0 : LSW >> count + addi r7,r5,32 # could be xori, or addi with -32 + slw r6,r3,r6 # t1 = count > 31 ? 0 : MSW << (32-count) + rlwinm r8,r7,0,32 # t3 = (count < 32) ? 32 : 0 + sraw r7,r3,r7 # t2 = MSW >> (count-32) + or r4,r4,r6 # LSW |= t1 + slw r7,r7,r8 # t2 = (count < 32) ? 0 : t2 + sraw r3,r3,r5 # MSW = MSW >> count + or r4,r4,r7 # LSW |= t2 + blr + +_GLOBAL(__ashldi3) + subfic r6,r5,32 + slw r3,r3,r5 # MSW = count > 31 ? 0 : MSW << count + addi r7,r5,32 # could be xori, or addi with -32 + srw r6,r4,r6 # t1 = count > 31 ? 0 : LSW >> (32-count) + slw r7,r4,r7 # t2 = count < 32 ? 0 : LSW << (count-32) + or r3,r3,r6 # MSW |= t1 + slw r4,r4,r5 # LSW = LSW << count + or r3,r3,r7 # MSW |= t2 + blr + +_GLOBAL(__lshrdi3) + subfic r6,r5,32 + srw r4,r4,r5 # LSW = count > 31 ? 0 : LSW >> count + addi r7,r5,32 # could be xori, or addi with -32 + slw r6,r3,r6 # t1 = count > 31 ? 0 : MSW << (32-count) + srw r7,r3,r7 # t2 = count < 32 ? 0 : MSW >> (count-32) + or r4,r4,r6 # LSW |= t1 + srw r3,r3,r5 # MSW = MSW >> count + or r4,r4,r7 # LSW |= t2 + blr + +_GLOBAL(abs) + srawi r4,r3,31 + xor r3,r3,r4 + sub r3,r3,r4 + blr + +_GLOBAL(_get_SP) + mr r3,r1 /* Close enough */ + blr + +/* + * These are used in the alignment trap handler when emulating + * single-precision loads and stores. + * We restore and save the fpscr so the task gets the same result + * and exceptions as if the cpu had performed the load or store. + */ + +#ifdef CONFIG_PPC_FPU +_GLOBAL(cvt_fd) + lfd 0,-4(r5) /* load up fpscr value */ + mtfsf 0xff,0 + lfs 0,0(r3) + stfd 0,0(r4) + mffs 0 /* save new fpscr value */ + stfd 0,-4(r5) + blr + +_GLOBAL(cvt_df) + lfd 0,-4(r5) /* load up fpscr value */ + mtfsf 0xff,0 + lfd 0,0(r3) + stfs 0,0(r4) + mffs 0 /* save new fpscr value */ + stfd 0,-4(r5) + blr +#endif + +/* + * Create a kernel thread + * kernel_thread(fn, arg, flags) + */ +_GLOBAL(kernel_thread) + stwu r1,-16(r1) + stw r30,8(r1) + stw r31,12(r1) + mr r30,r3 /* function */ + mr r31,r4 /* argument */ + ori r3,r5,CLONE_VM /* flags */ + oris r3,r3,CLONE_UNTRACED>>16 + li r4,0 /* new sp (unused) */ + li r0,__NR_clone + sc + cmpwi 0,r3,0 /* parent or child? */ + bne 1f /* return if parent */ + li r0,0 /* make top-level stack frame */ + stwu r0,-16(r1) + mtlr r30 /* fn addr in lr */ + mr r3,r31 /* load arg and call fn */ + PPC440EP_ERR42 + blrl + li r0,__NR_exit /* exit if function returns */ + li r3,0 + sc +1: lwz r30,8(r1) + lwz r31,12(r1) + addi r1,r1,16 + blr + +_GLOBAL(execve) + li r0,__NR_execve + sc + bnslr + neg r3,r3 + blr + +/* + * This routine is just here to keep GCC happy - sigh... + */ +_GLOBAL(__main) + blr |