diff options
Diffstat (limited to 'arch/powerpc/kernel/setup-common.c')
-rw-r--r-- | arch/powerpc/kernel/setup-common.c | 591 |
1 files changed, 591 insertions, 0 deletions
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c new file mode 100644 index 00000000000..bd3eb4292b5 --- /dev/null +++ b/arch/powerpc/kernel/setup-common.c @@ -0,0 +1,591 @@ +/* + * Common boot and setup code for both 32-bit and 64-bit. + * Extracted from arch/powerpc/kernel/setup_64.c. + * + * Copyright (C) 2001 PPC64 Team, IBM Corp + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include <linux/config.h> +#include <linux/module.h> +#include <linux/string.h> +#include <linux/sched.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/reboot.h> +#include <linux/delay.h> +#include <linux/initrd.h> +#include <linux/ide.h> +#include <linux/seq_file.h> +#include <linux/ioport.h> +#include <linux/console.h> +#include <linux/utsname.h> +#include <linux/tty.h> +#include <linux/root_dev.h> +#include <linux/notifier.h> +#include <linux/cpu.h> +#include <linux/unistd.h> +#include <linux/serial.h> +#include <linux/serial_8250.h> +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/processor.h> +#include <asm/vdso_datapage.h> +#include <asm/pgtable.h> +#include <asm/smp.h> +#include <asm/elf.h> +#include <asm/machdep.h> +#include <asm/time.h> +#include <asm/cputable.h> +#include <asm/sections.h> +#include <asm/btext.h> +#include <asm/nvram.h> +#include <asm/setup.h> +#include <asm/system.h> +#include <asm/rtas.h> +#include <asm/iommu.h> +#include <asm/serial.h> +#include <asm/cache.h> +#include <asm/page.h> +#include <asm/mmu.h> +#include <asm/lmb.h> +#include <asm/xmon.h> + +#include "setup.h" + +#undef DEBUG + +#ifdef DEBUG +#include <asm/udbg.h> +#define DBG(fmt...) udbg_printf(fmt) +#else +#define DBG(fmt...) +#endif + +#ifdef CONFIG_PPC_MULTIPLATFORM +int _machine = 0; +EXPORT_SYMBOL(_machine); +#endif + +unsigned long klimit = (unsigned long) _end; + +/* + * This still seems to be needed... -- paulus + */ +struct screen_info screen_info = { + .orig_x = 0, + .orig_y = 25, + .orig_video_cols = 80, + .orig_video_lines = 25, + .orig_video_isVGA = 1, + .orig_video_points = 16 +}; + +#ifdef __DO_IRQ_CANON +/* XXX should go elsewhere eventually */ +int ppc_do_canonicalize_irqs; +EXPORT_SYMBOL(ppc_do_canonicalize_irqs); +#endif + +/* also used by kexec */ +void machine_shutdown(void) +{ + if (ppc_md.nvram_sync) + ppc_md.nvram_sync(); +} + +void machine_restart(char *cmd) +{ + machine_shutdown(); + ppc_md.restart(cmd); +#ifdef CONFIG_SMP + smp_send_stop(); +#endif + printk(KERN_EMERG "System Halted, OK to turn off power\n"); + local_irq_disable(); + while (1) ; +} + +void machine_power_off(void) +{ + machine_shutdown(); + ppc_md.power_off(); +#ifdef CONFIG_SMP + smp_send_stop(); +#endif + printk(KERN_EMERG "System Halted, OK to turn off power\n"); + local_irq_disable(); + while (1) ; +} +/* Used by the G5 thermal driver */ +EXPORT_SYMBOL_GPL(machine_power_off); + +void (*pm_power_off)(void) = machine_power_off; +EXPORT_SYMBOL_GPL(pm_power_off); + +void machine_halt(void) +{ + machine_shutdown(); + ppc_md.halt(); +#ifdef CONFIG_SMP + smp_send_stop(); +#endif + printk(KERN_EMERG "System Halted, OK to turn off power\n"); + local_irq_disable(); + while (1) ; +} + + +#ifdef CONFIG_TAU +extern u32 cpu_temp(unsigned long cpu); +extern u32 cpu_temp_both(unsigned long cpu); +#endif /* CONFIG_TAU */ + +#ifdef CONFIG_SMP +DEFINE_PER_CPU(unsigned int, pvr); +#endif + +static int show_cpuinfo(struct seq_file *m, void *v) +{ + unsigned long cpu_id = (unsigned long)v - 1; + unsigned int pvr; + unsigned short maj; + unsigned short min; + + if (cpu_id == NR_CPUS) { +#if defined(CONFIG_SMP) && defined(CONFIG_PPC32) + unsigned long bogosum = 0; + int i; + for (i = 0; i < NR_CPUS; ++i) + if (cpu_online(i)) + bogosum += loops_per_jiffy; + seq_printf(m, "total bogomips\t: %lu.%02lu\n", + bogosum/(500000/HZ), bogosum/(5000/HZ) % 100); +#endif /* CONFIG_SMP && CONFIG_PPC32 */ + seq_printf(m, "timebase\t: %lu\n", ppc_tb_freq); + + if (ppc_md.show_cpuinfo != NULL) + ppc_md.show_cpuinfo(m); + + return 0; + } + + /* We only show online cpus: disable preempt (overzealous, I + * knew) to prevent cpu going down. */ + preempt_disable(); + if (!cpu_online(cpu_id)) { + preempt_enable(); + return 0; + } + +#ifdef CONFIG_SMP + pvr = per_cpu(pvr, cpu_id); +#else + pvr = mfspr(SPRN_PVR); +#endif + maj = (pvr >> 8) & 0xFF; + min = pvr & 0xFF; + + seq_printf(m, "processor\t: %lu\n", cpu_id); + seq_printf(m, "cpu\t\t: "); + + if (cur_cpu_spec->pvr_mask) + seq_printf(m, "%s", cur_cpu_spec->cpu_name); + else + seq_printf(m, "unknown (%08x)", pvr); + +#ifdef CONFIG_ALTIVEC + if (cpu_has_feature(CPU_FTR_ALTIVEC)) + seq_printf(m, ", altivec supported"); +#endif /* CONFIG_ALTIVEC */ + + seq_printf(m, "\n"); + +#ifdef CONFIG_TAU + if (cur_cpu_spec->cpu_features & CPU_FTR_TAU) { +#ifdef CONFIG_TAU_AVERAGE + /* more straightforward, but potentially misleading */ + seq_printf(m, "temperature \t: %u C (uncalibrated)\n", + cpu_temp(cpu_id)); +#else + /* show the actual temp sensor range */ + u32 temp; + temp = cpu_temp_both(cpu_id); + seq_printf(m, "temperature \t: %u-%u C (uncalibrated)\n", + temp & 0xff, temp >> 16); +#endif + } +#endif /* CONFIG_TAU */ + + /* + * Assume here that all clock rates are the same in a + * smp system. -- Cort + */ + if (ppc_proc_freq) + seq_printf(m, "clock\t\t: %lu.%06luMHz\n", + ppc_proc_freq / 1000000, ppc_proc_freq % 1000000); + + if (ppc_md.show_percpuinfo != NULL) + ppc_md.show_percpuinfo(m, cpu_id); + + /* If we are a Freescale core do a simple check so + * we dont have to keep adding cases in the future */ + if (PVR_VER(pvr) & 0x8000) { + maj = PVR_MAJ(pvr); + min = PVR_MIN(pvr); + } else { + switch (PVR_VER(pvr)) { + case 0x0020: /* 403 family */ + maj = PVR_MAJ(pvr) + 1; + min = PVR_MIN(pvr); + break; + case 0x1008: /* 740P/750P ?? */ + maj = ((pvr >> 8) & 0xFF) - 1; + min = pvr & 0xFF; + break; + default: + maj = (pvr >> 8) & 0xFF; + min = pvr & 0xFF; + break; + } + } + + seq_printf(m, "revision\t: %hd.%hd (pvr %04x %04x)\n", + maj, min, PVR_VER(pvr), PVR_REV(pvr)); + +#ifdef CONFIG_PPC32 + seq_printf(m, "bogomips\t: %lu.%02lu\n", + loops_per_jiffy / (500000/HZ), + (loops_per_jiffy / (5000/HZ)) % 100); +#endif + +#ifdef CONFIG_SMP + seq_printf(m, "\n"); +#endif + + preempt_enable(); + return 0; +} + +static void *c_start(struct seq_file *m, loff_t *pos) +{ + unsigned long i = *pos; + + return i <= NR_CPUS ? (void *)(i + 1) : NULL; +} + +static void *c_next(struct seq_file *m, void *v, loff_t *pos) +{ + ++*pos; + return c_start(m, pos); +} + +static void c_stop(struct seq_file *m, void *v) +{ +} + +struct seq_operations cpuinfo_op = { + .start =c_start, + .next = c_next, + .stop = c_stop, + .show = show_cpuinfo, +}; + +#ifdef CONFIG_PPC_MULTIPLATFORM +static int __init set_preferred_console(void) +{ + struct device_node *prom_stdout = NULL; + char *name; + u32 *spd; + int offset = 0; + + DBG(" -> set_preferred_console()\n"); + + /* The user has requested a console so this is already set up. */ + if (strstr(saved_command_line, "console=")) { + DBG(" console was specified !\n"); + return -EBUSY; + } + + if (!of_chosen) { + DBG(" of_chosen is NULL !\n"); + return -ENODEV; + } + /* We are getting a weird phandle from OF ... */ + /* ... So use the full path instead */ + name = (char *)get_property(of_chosen, "linux,stdout-path", NULL); + if (name == NULL) { + DBG(" no linux,stdout-path !\n"); + return -ENODEV; + } + prom_stdout = of_find_node_by_path(name); + if (!prom_stdout) { + DBG(" can't find stdout package %s !\n", name); + return -ENODEV; + } + DBG("stdout is %s\n", prom_stdout->full_name); + + name = (char *)get_property(prom_stdout, "name", NULL); + if (!name) { + DBG(" stdout package has no name !\n"); + goto not_found; + } + spd = (u32 *)get_property(prom_stdout, "current-speed", NULL); + + if (0) + ; +#ifdef CONFIG_SERIAL_8250_CONSOLE + else if (strcmp(name, "serial") == 0) { + int i; + u32 *reg = (u32 *)get_property(prom_stdout, "reg", &i); + if (i > 8) { + switch (reg[1]) { + case 0x3f8: + offset = 0; + break; + case 0x2f8: + offset = 1; + break; + case 0x898: + offset = 2; + break; + case 0x890: + offset = 3; + break; + default: + /* We dont recognise the serial port */ + goto not_found; + } + } + } +#endif /* CONFIG_SERIAL_8250_CONSOLE */ +#ifdef CONFIG_PPC_PSERIES + else if (strcmp(name, "vty") == 0) { + u32 *reg = (u32 *)get_property(prom_stdout, "reg", NULL); + char *compat = (char *)get_property(prom_stdout, "compatible", NULL); + + if (reg && compat && (strcmp(compat, "hvterm-protocol") == 0)) { + /* Host Virtual Serial Interface */ + switch (reg[0]) { + case 0x30000000: + offset = 0; + break; + case 0x30000001: + offset = 1; + break; + default: + goto not_found; + } + of_node_put(prom_stdout); + DBG("Found hvsi console at offset %d\n", offset); + return add_preferred_console("hvsi", offset, NULL); + } else { + /* pSeries LPAR virtual console */ + of_node_put(prom_stdout); + DBG("Found hvc console\n"); + return add_preferred_console("hvc", 0, NULL); + } + } +#endif /* CONFIG_PPC_PSERIES */ +#ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE + else if (strcmp(name, "ch-a") == 0) + offset = 0; + else if (strcmp(name, "ch-b") == 0) + offset = 1; +#endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */ + else + goto not_found; + of_node_put(prom_stdout); + + DBG("Found serial console at ttyS%d\n", offset); + + if (spd) { + static char __initdata opt[16]; + sprintf(opt, "%d", *spd); + return add_preferred_console("ttyS", offset, opt); + } else + return add_preferred_console("ttyS", offset, NULL); + + not_found: + DBG("No preferred console found !\n"); + of_node_put(prom_stdout); + return -ENODEV; +} +console_initcall(set_preferred_console); +#endif /* CONFIG_PPC_MULTIPLATFORM */ + +void __init check_for_initrd(void) +{ +#ifdef CONFIG_BLK_DEV_INITRD + unsigned long *prop; + + DBG(" -> check_for_initrd()\n"); + + if (of_chosen) { + prop = (unsigned long *)get_property(of_chosen, + "linux,initrd-start", NULL); + if (prop != NULL) { + initrd_start = (unsigned long)__va(*prop); + prop = (unsigned long *)get_property(of_chosen, + "linux,initrd-end", NULL); + if (prop != NULL) { + initrd_end = (unsigned long)__va(*prop); + initrd_below_start_ok = 1; + } else + initrd_start = 0; + } + } + + /* If we were passed an initrd, set the ROOT_DEV properly if the values + * look sensible. If not, clear initrd reference. + */ + if (initrd_start >= KERNELBASE && initrd_end >= KERNELBASE && + initrd_end > initrd_start) + ROOT_DEV = Root_RAM0; + else + initrd_start = initrd_end = 0; + + if (initrd_start) + printk("Found initrd at 0x%lx:0x%lx\n", initrd_start, initrd_end); + + DBG(" <- check_for_initrd()\n"); +#endif /* CONFIG_BLK_DEV_INITRD */ +} + +#ifdef CONFIG_SMP + +/** + * setup_cpu_maps - initialize the following cpu maps: + * cpu_possible_map + * cpu_present_map + * cpu_sibling_map + * + * Having the possible map set up early allows us to restrict allocations + * of things like irqstacks to num_possible_cpus() rather than NR_CPUS. + * + * We do not initialize the online map here; cpus set their own bits in + * cpu_online_map as they come up. + * + * This function is valid only for Open Firmware systems. finish_device_tree + * must be called before using this. + * + * While we're here, we may as well set the "physical" cpu ids in the paca. + */ +void __init smp_setup_cpu_maps(void) +{ + struct device_node *dn = NULL; + int cpu = 0; + int swap_cpuid = 0; + + while ((dn = of_find_node_by_type(dn, "cpu")) && cpu < NR_CPUS) { + int *intserv; + int j, len = sizeof(u32), nthreads = 1; + + intserv = (int *)get_property(dn, "ibm,ppc-interrupt-server#s", + &len); + if (intserv) + nthreads = len / sizeof(int); + else { + intserv = (int *) get_property(dn, "reg", NULL); + if (!intserv) + intserv = &cpu; /* assume logical == phys */ + } + + for (j = 0; j < nthreads && cpu < NR_CPUS; j++) { + cpu_set(cpu, cpu_present_map); + set_hard_smp_processor_id(cpu, intserv[j]); + + if (intserv[j] == boot_cpuid_phys) + swap_cpuid = cpu; + cpu_set(cpu, cpu_possible_map); + cpu++; + } + } + + /* Swap CPU id 0 with boot_cpuid_phys, so we can always assume that + * boot cpu is logical 0. + */ + if (boot_cpuid_phys != get_hard_smp_processor_id(0)) { + u32 tmp; + tmp = get_hard_smp_processor_id(0); + set_hard_smp_processor_id(0, boot_cpuid_phys); + set_hard_smp_processor_id(swap_cpuid, tmp); + } + +#ifdef CONFIG_PPC64 + /* + * On pSeries LPAR, we need to know how many cpus + * could possibly be added to this partition. + */ + if (_machine == PLATFORM_PSERIES_LPAR && + (dn = of_find_node_by_path("/rtas"))) { + int num_addr_cell, num_size_cell, maxcpus; + unsigned int *ireg; + + num_addr_cell = prom_n_addr_cells(dn); + num_size_cell = prom_n_size_cells(dn); + + ireg = (unsigned int *) + get_property(dn, "ibm,lrdr-capacity", NULL); + + if (!ireg) + goto out; + + maxcpus = ireg[num_addr_cell + num_size_cell]; + + /* Double maxcpus for processors which have SMT capability */ + if (cpu_has_feature(CPU_FTR_SMT)) + maxcpus *= 2; + + if (maxcpus > NR_CPUS) { + printk(KERN_WARNING + "Partition configured for %d cpus, " + "operating system maximum is %d.\n", + maxcpus, NR_CPUS); + maxcpus = NR_CPUS; + } else + printk(KERN_INFO "Partition configured for %d cpus.\n", + maxcpus); + + for (cpu = 0; cpu < maxcpus; cpu++) + cpu_set(cpu, cpu_possible_map); + out: + of_node_put(dn); + } + + /* + * Do the sibling map; assume only two threads per processor. + */ + for_each_cpu(cpu) { + cpu_set(cpu, cpu_sibling_map[cpu]); + if (cpu_has_feature(CPU_FTR_SMT)) + cpu_set(cpu ^ 0x1, cpu_sibling_map[cpu]); + } + + vdso_data->processorCount = num_present_cpus(); +#endif /* CONFIG_PPC64 */ +} +#endif /* CONFIG_SMP */ + +#ifdef CONFIG_XMON +static int __init early_xmon(char *p) +{ + /* ensure xmon is enabled */ + if (p) { + if (strncmp(p, "on", 2) == 0) + xmon_init(1); + if (strncmp(p, "off", 3) == 0) + xmon_init(0); + if (strncmp(p, "early", 5) != 0) + return 0; + } + xmon_init(1); + debugger(NULL); + + return 0; +} +early_param("xmon", early_xmon); +#endif |