diff options
Diffstat (limited to 'arch/powerpc/kernel/setup_32.c')
-rw-r--r-- | arch/powerpc/kernel/setup_32.c | 365 |
1 files changed, 365 insertions, 0 deletions
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c new file mode 100644 index 00000000000..e5694335bf1 --- /dev/null +++ b/arch/powerpc/kernel/setup_32.c @@ -0,0 +1,365 @@ +/* + * Common prep/pmac/chrp boot and setup code. + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/string.h> +#include <linux/sched.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/reboot.h> +#include <linux/delay.h> +#include <linux/initrd.h> +#include <linux/ide.h> +#include <linux/tty.h> +#include <linux/bootmem.h> +#include <linux/seq_file.h> +#include <linux/root_dev.h> +#include <linux/cpu.h> +#include <linux/console.h> + +#include <asm/residual.h> +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/processor.h> +#include <asm/pgtable.h> +#include <asm/setup.h> +#include <asm/amigappc.h> +#include <asm/smp.h> +#include <asm/elf.h> +#include <asm/cputable.h> +#include <asm/bootx.h> +#include <asm/btext.h> +#include <asm/machdep.h> +#include <asm/uaccess.h> +#include <asm/system.h> +#include <asm/pmac_feature.h> +#include <asm/sections.h> +#include <asm/nvram.h> +#include <asm/xmon.h> +#include <asm/time.h> + +#include "setup.h" + +#define DBG(fmt...) + +#if defined CONFIG_KGDB +#include <asm/kgdb.h> +#endif + +extern void platform_init(void); +extern void bootx_init(unsigned long r4, unsigned long phys); + +extern void ppc6xx_idle(void); +extern void power4_idle(void); + +boot_infos_t *boot_infos; +struct ide_machdep_calls ppc_ide_md; + +int boot_cpuid; +EXPORT_SYMBOL_GPL(boot_cpuid); +int boot_cpuid_phys; + +unsigned long ISA_DMA_THRESHOLD; +unsigned int DMA_MODE_READ; +unsigned int DMA_MODE_WRITE; + +int have_of = 1; + +#ifdef CONFIG_PPC_MULTIPLATFORM +extern void prep_init(void); +extern void pmac_init(void); +extern void chrp_init(void); + +dev_t boot_dev; +#endif /* CONFIG_PPC_MULTIPLATFORM */ + +#ifdef CONFIG_MAGIC_SYSRQ +unsigned long SYSRQ_KEY = 0x54; +#endif /* CONFIG_MAGIC_SYSRQ */ + +#ifdef CONFIG_VGA_CONSOLE +unsigned long vgacon_remap_base; +#endif + +struct machdep_calls ppc_md; +EXPORT_SYMBOL(ppc_md); + +/* + * These are used in binfmt_elf.c to put aux entries on the stack + * for each elf executable being started. + */ +int dcache_bsize; +int icache_bsize; +int ucache_bsize; + +/* + * We're called here very early in the boot. We determine the machine + * type and call the appropriate low-level setup functions. + * -- Cort <cort@fsmlabs.com> + * + * Note that the kernel may be running at an address which is different + * from the address that it was linked at, so we must use RELOC/PTRRELOC + * to access static data (including strings). -- paulus + */ +unsigned long __init early_init(unsigned long dt_ptr) +{ + unsigned long offset = reloc_offset(); + + /* First zero the BSS -- use memset_io, some platforms don't have + * caches on yet */ + memset_io(PTRRELOC(&__bss_start), 0, _end - __bss_start); + + /* + * Identify the CPU type and fix up code sections + * that depend on which cpu we have. + */ + identify_cpu(offset, 0); + do_cpu_ftr_fixups(offset); + + return KERNELBASE + offset; +} + +#ifdef CONFIG_PPC_MULTIPLATFORM +/* + * The PPC_MULTIPLATFORM version of platform_init... + */ +void __init platform_init(void) +{ + /* if we didn't get any bootinfo telling us what we are... */ + if (_machine == 0) { + /* prep boot loader tells us if we're prep or not */ + if ( *(unsigned long *)(KERNELBASE) == (0xdeadc0de) ) + _machine = _MACH_prep; + } + +#ifdef CONFIG_PPC_PREP + /* not much more to do here, if prep */ + if (_machine == _MACH_prep) { + prep_init(); + return; + } +#endif + +#ifdef CONFIG_ADB + if (strstr(cmd_line, "adb_sync")) { + extern int __adb_probe_sync; + __adb_probe_sync = 1; + } +#endif /* CONFIG_ADB */ + + switch (_machine) { +#ifdef CONFIG_PPC_PMAC + case _MACH_Pmac: + pmac_init(); + break; +#endif +#ifdef CONFIG_PPC_CHRP + case _MACH_chrp: + chrp_init(); + break; +#endif + } +} +#endif + +/* + * Find out what kind of machine we're on and save any data we need + * from the early boot process (devtree is copied on pmac by prom_init()). + * This is called very early on the boot process, after a minimal + * MMU environment has been set up but before MMU_init is called. + */ +void __init machine_init(unsigned long dt_ptr, unsigned long phys) +{ + early_init_devtree(__va(dt_ptr)); + +#ifdef CONFIG_CMDLINE + strlcpy(cmd_line, CONFIG_CMDLINE, sizeof(cmd_line)); +#endif /* CONFIG_CMDLINE */ + + platform_init(); + +#ifdef CONFIG_6xx + ppc_md.power_save = ppc6xx_idle; +#endif + + if (ppc_md.progress) + ppc_md.progress("id mach(): done", 0x200); +} + +#ifdef CONFIG_BOOKE_WDT +/* Checks wdt=x and wdt_period=xx command-line option */ +int __init early_parse_wdt(char *p) +{ + if (p && strncmp(p, "0", 1) != 0) + booke_wdt_enabled = 1; + + return 0; +} +early_param("wdt", early_parse_wdt); + +int __init early_parse_wdt_period (char *p) +{ + if (p) + booke_wdt_period = simple_strtoul(p, NULL, 0); + + return 0; +} +early_param("wdt_period", early_parse_wdt_period); +#endif /* CONFIG_BOOKE_WDT */ + +/* Checks "l2cr=xxxx" command-line option */ +int __init ppc_setup_l2cr(char *str) +{ + if (cpu_has_feature(CPU_FTR_L2CR)) { + unsigned long val = simple_strtoul(str, NULL, 0); + printk(KERN_INFO "l2cr set to %lx\n", val); + _set_L2CR(0); /* force invalidate by disable cache */ + _set_L2CR(val); /* and enable it */ + } + return 1; +} +__setup("l2cr=", ppc_setup_l2cr); + +#ifdef CONFIG_GENERIC_NVRAM + +/* Generic nvram hooks used by drivers/char/gen_nvram.c */ +unsigned char nvram_read_byte(int addr) +{ + if (ppc_md.nvram_read_val) + return ppc_md.nvram_read_val(addr); + return 0xff; +} +EXPORT_SYMBOL(nvram_read_byte); + +void nvram_write_byte(unsigned char val, int addr) +{ + if (ppc_md.nvram_write_val) + ppc_md.nvram_write_val(addr, val); +} +EXPORT_SYMBOL(nvram_write_byte); + +void nvram_sync(void) +{ + if (ppc_md.nvram_sync) + ppc_md.nvram_sync(); +} +EXPORT_SYMBOL(nvram_sync); + +#endif /* CONFIG_NVRAM */ + +static struct cpu cpu_devices[NR_CPUS]; + +int __init ppc_init(void) +{ + int i; + + /* clear the progress line */ + if ( ppc_md.progress ) ppc_md.progress(" ", 0xffff); + + /* register CPU devices */ + for (i = 0; i < NR_CPUS; i++) + if (cpu_possible(i)) + register_cpu(&cpu_devices[i], i, NULL); + + /* call platform init */ + if (ppc_md.init != NULL) { + ppc_md.init(); + } + return 0; +} + +arch_initcall(ppc_init); + +/* Warning, IO base is not yet inited */ +void __init setup_arch(char **cmdline_p) +{ + extern void do_init_bootmem(void); + + /* so udelay does something sensible, assume <= 1000 bogomips */ + loops_per_jiffy = 500000000 / HZ; + + unflatten_device_tree(); + check_for_initrd(); + finish_device_tree(); + + smp_setup_cpu_maps(); + +#ifdef CONFIG_BOOTX_TEXT + init_boot_display(); +#endif + +#ifdef CONFIG_PPC_PMAC + /* This could be called "early setup arch", it must be done + * now because xmon need it + */ + if (_machine == _MACH_Pmac) + pmac_feature_init(); /* New cool way */ +#endif + +#ifdef CONFIG_XMON_DEFAULT + xmon_init(1); +#endif + +#if defined(CONFIG_KGDB) + if (ppc_md.kgdb_map_scc) + ppc_md.kgdb_map_scc(); + set_debug_traps(); + if (strstr(cmd_line, "gdb")) { + if (ppc_md.progress) + ppc_md.progress("setup_arch: kgdb breakpoint", 0x4000); + printk("kgdb breakpoint activated\n"); + breakpoint(); + } +#endif + + /* + * Set cache line size based on type of cpu as a default. + * Systems with OF can look in the properties on the cpu node(s) + * for a possibly more accurate value. + */ + if (cpu_has_feature(CPU_FTR_SPLIT_ID_CACHE)) { + dcache_bsize = cur_cpu_spec->dcache_bsize; + icache_bsize = cur_cpu_spec->icache_bsize; + ucache_bsize = 0; + } else + ucache_bsize = dcache_bsize = icache_bsize + = cur_cpu_spec->dcache_bsize; + + /* reboot on panic */ + panic_timeout = 180; + + init_mm.start_code = PAGE_OFFSET; + init_mm.end_code = (unsigned long) _etext; + init_mm.end_data = (unsigned long) _edata; + init_mm.brk = klimit; + + /* Save unparsed command line copy for /proc/cmdline */ + strlcpy(saved_command_line, cmd_line, COMMAND_LINE_SIZE); + *cmdline_p = cmd_line; + + parse_early_param(); + + /* set up the bootmem stuff with available memory */ + do_init_bootmem(); + if ( ppc_md.progress ) ppc_md.progress("setup_arch: bootmem", 0x3eab); + +#ifdef CONFIG_PPC_OCP + /* Initialize OCP device list */ + ocp_early_init(); + if ( ppc_md.progress ) ppc_md.progress("ocp: exit", 0x3eab); +#endif + +#ifdef CONFIG_DUMMY_CONSOLE + conswitchp = &dummy_con; +#endif + + ppc_md.setup_arch(); + if ( ppc_md.progress ) ppc_md.progress("arch: exit", 0x3eab); + + paging_init(); + + /* this is for modules since _machine can be a define -- Cort */ + ppc_md.ppc_machine = _machine; +} |