diff options
Diffstat (limited to 'arch/powerpc/kernel/signal_64.c')
-rw-r--r-- | arch/powerpc/kernel/signal_64.c | 337 |
1 files changed, 334 insertions, 3 deletions
diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c index 1ca045d4432..7a76ee48a95 100644 --- a/arch/powerpc/kernel/signal_64.c +++ b/arch/powerpc/kernel/signal_64.c @@ -34,6 +34,7 @@ #include <asm/syscalls.h> #include <asm/vdso.h> #include <asm/switch_to.h> +#include <asm/tm.h> #include "signal.h" @@ -56,6 +57,9 @@ struct rt_sigframe { /* sys_rt_sigreturn requires the ucontext be the first field */ struct ucontext uc; +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM + struct ucontext uc_transact; +#endif unsigned long _unused[2]; unsigned int tramp[TRAMP_SIZE]; struct siginfo __user *pinfo; @@ -145,6 +149,145 @@ static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, return err; } +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM +/* + * As above, but Transactional Memory is in use, so deliver sigcontexts + * containing checkpointed and transactional register states. + * + * To do this, we treclaim to gather both sets of registers and set up the + * 'normal' sigcontext registers with rolled-back register values such that a + * simple signal handler sees a correct checkpointed register state. + * If interested, a TM-aware sighandler can examine the transactional registers + * in the 2nd sigcontext to determine the real origin of the signal. + */ +static long setup_tm_sigcontexts(struct sigcontext __user *sc, + struct sigcontext __user *tm_sc, + struct pt_regs *regs, + int signr, sigset_t *set, unsigned long handler) +{ + /* When CONFIG_ALTIVEC is set, we _always_ setup v_regs even if the + * process never used altivec yet (MSR_VEC is zero in pt_regs of + * the context). This is very important because we must ensure we + * don't lose the VRSAVE content that may have been set prior to + * the process doing its first vector operation + * Userland shall check AT_HWCAP to know wether it can rely on the + * v_regs pointer or not. + */ +#ifdef CONFIG_ALTIVEC + elf_vrreg_t __user *v_regs = (elf_vrreg_t __user *) + (((unsigned long)sc->vmx_reserve + 15) & ~0xful); + elf_vrreg_t __user *tm_v_regs = (elf_vrreg_t __user *) + (((unsigned long)tm_sc->vmx_reserve + 15) & ~0xful); +#endif + unsigned long msr = regs->msr; + long err = 0; + + BUG_ON(!MSR_TM_ACTIVE(regs->msr)); + + /* tm_reclaim rolls back all reg states, saving checkpointed (older) + * GPRs to thread.ckpt_regs and (if used) FPRs to (newer) + * thread.transact_fp and/or VRs to (newer) thread.transact_vr. + * THEN we save out FP/VRs, if necessary, to the checkpointed (older) + * thread.fr[]/vr[]s. The transactional (newer) GPRs are on the + * stack, in *regs. + */ + tm_enable(); + tm_reclaim(¤t->thread, msr, TM_CAUSE_SIGNAL); + + flush_fp_to_thread(current); + +#ifdef CONFIG_ALTIVEC + err |= __put_user(v_regs, &sc->v_regs); + err |= __put_user(tm_v_regs, &tm_sc->v_regs); + + /* save altivec registers */ + if (current->thread.used_vr) { + flush_altivec_to_thread(current); + /* Copy 33 vec registers (vr0..31 and vscr) to the stack */ + err |= __copy_to_user(v_regs, current->thread.vr, + 33 * sizeof(vector128)); + /* If VEC was enabled there are transactional VRs valid too, + * else they're a copy of the checkpointed VRs. + */ + if (msr & MSR_VEC) + err |= __copy_to_user(tm_v_regs, + current->thread.transact_vr, + 33 * sizeof(vector128)); + else + err |= __copy_to_user(tm_v_regs, + current->thread.vr, + 33 * sizeof(vector128)); + + /* set MSR_VEC in the MSR value in the frame to indicate + * that sc->v_reg contains valid data. + */ + msr |= MSR_VEC; + } + /* We always copy to/from vrsave, it's 0 if we don't have or don't + * use altivec. + */ + err |= __put_user(current->thread.vrsave, (u32 __user *)&v_regs[33]); + if (msr & MSR_VEC) + err |= __put_user(current->thread.transact_vrsave, + (u32 __user *)&tm_v_regs[33]); + else + err |= __put_user(current->thread.vrsave, + (u32 __user *)&tm_v_regs[33]); + +#else /* CONFIG_ALTIVEC */ + err |= __put_user(0, &sc->v_regs); + err |= __put_user(0, &tm_sc->v_regs); +#endif /* CONFIG_ALTIVEC */ + + /* copy fpr regs and fpscr */ + err |= copy_fpr_to_user(&sc->fp_regs, current); + if (msr & MSR_FP) + err |= copy_transact_fpr_to_user(&tm_sc->fp_regs, current); + else + err |= copy_fpr_to_user(&tm_sc->fp_regs, current); + +#ifdef CONFIG_VSX + /* + * Copy VSX low doubleword to local buffer for formatting, + * then out to userspace. Update v_regs to point after the + * VMX data. + */ + if (current->thread.used_vsr) { + __giveup_vsx(current); + v_regs += ELF_NVRREG; + tm_v_regs += ELF_NVRREG; + + err |= copy_vsx_to_user(v_regs, current); + + if (msr & MSR_VSX) + err |= copy_transact_vsx_to_user(tm_v_regs, current); + else + err |= copy_vsx_to_user(tm_v_regs, current); + + /* set MSR_VSX in the MSR value in the frame to + * indicate that sc->vs_reg) contains valid data. + */ + msr |= MSR_VSX; + } +#endif /* CONFIG_VSX */ + + err |= __put_user(&sc->gp_regs, &sc->regs); + err |= __put_user(&tm_sc->gp_regs, &tm_sc->regs); + WARN_ON(!FULL_REGS(regs)); + err |= __copy_to_user(&tm_sc->gp_regs, regs, GP_REGS_SIZE); + err |= __copy_to_user(&sc->gp_regs, + ¤t->thread.ckpt_regs, GP_REGS_SIZE); + err |= __put_user(msr, &tm_sc->gp_regs[PT_MSR]); + err |= __put_user(msr, &sc->gp_regs[PT_MSR]); + err |= __put_user(signr, &sc->signal); + err |= __put_user(handler, &sc->handler); + if (set != NULL) + err |= __put_user(set->sig[0], &sc->oldmask); + + return err; +} +#endif + /* * Restore the sigcontext from the signal frame. */ @@ -241,6 +384,153 @@ static long restore_sigcontext(struct pt_regs *regs, sigset_t *set, int sig, return err; } +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM +/* + * Restore the two sigcontexts from the frame of a transactional processes. + */ + +static long restore_tm_sigcontexts(struct pt_regs *regs, + struct sigcontext __user *sc, + struct sigcontext __user *tm_sc) +{ +#ifdef CONFIG_ALTIVEC + elf_vrreg_t __user *v_regs, *tm_v_regs; +#endif + unsigned long err = 0; + unsigned long msr; +#ifdef CONFIG_VSX + int i; +#endif + /* copy the GPRs */ + err |= __copy_from_user(regs->gpr, tm_sc->gp_regs, sizeof(regs->gpr)); + err |= __copy_from_user(¤t->thread.ckpt_regs, sc->gp_regs, + sizeof(regs->gpr)); + + /* + * TFHAR is restored from the checkpointed 'wound-back' ucontext's NIP. + * TEXASR was set by the signal delivery reclaim, as was TFIAR. + * Users doing anything abhorrent like thread-switching w/ signals for + * TM-Suspended code will have to back TEXASR/TFIAR up themselves. + * For the case of getting a signal and simply returning from it, + * we don't need to re-copy them here. + */ + err |= __get_user(regs->nip, &tm_sc->gp_regs[PT_NIP]); + err |= __get_user(current->thread.tm_tfhar, &sc->gp_regs[PT_NIP]); + + /* get MSR separately, transfer the LE bit if doing signal return */ + err |= __get_user(msr, &sc->gp_regs[PT_MSR]); + regs->msr = (regs->msr & ~MSR_LE) | (msr & MSR_LE); + + /* The following non-GPR non-FPR non-VR state is also checkpointed: */ + err |= __get_user(regs->ctr, &tm_sc->gp_regs[PT_CTR]); + err |= __get_user(regs->link, &tm_sc->gp_regs[PT_LNK]); + err |= __get_user(regs->xer, &tm_sc->gp_regs[PT_XER]); + err |= __get_user(regs->ccr, &tm_sc->gp_regs[PT_CCR]); + err |= __get_user(current->thread.ckpt_regs.ctr, + &sc->gp_regs[PT_CTR]); + err |= __get_user(current->thread.ckpt_regs.link, + &sc->gp_regs[PT_LNK]); + err |= __get_user(current->thread.ckpt_regs.xer, + &sc->gp_regs[PT_XER]); + err |= __get_user(current->thread.ckpt_regs.ccr, + &sc->gp_regs[PT_CCR]); + + /* These regs are not checkpointed; they can go in 'regs'. */ + err |= __get_user(regs->trap, &sc->gp_regs[PT_TRAP]); + err |= __get_user(regs->dar, &sc->gp_regs[PT_DAR]); + err |= __get_user(regs->dsisr, &sc->gp_regs[PT_DSISR]); + err |= __get_user(regs->result, &sc->gp_regs[PT_RESULT]); + + /* + * Do this before updating the thread state in + * current->thread.fpr/vr. That way, if we get preempted + * and another task grabs the FPU/Altivec, it won't be + * tempted to save the current CPU state into the thread_struct + * and corrupt what we are writing there. + */ + discard_lazy_cpu_state(); + + /* + * Force reload of FP/VEC. + * This has to be done before copying stuff into current->thread.fpr/vr + * for the reasons explained in the previous comment. + */ + regs->msr &= ~(MSR_FP | MSR_FE0 | MSR_FE1 | MSR_VEC | MSR_VSX); + +#ifdef CONFIG_ALTIVEC + err |= __get_user(v_regs, &sc->v_regs); + err |= __get_user(tm_v_regs, &tm_sc->v_regs); + if (err) + return err; + if (v_regs && !access_ok(VERIFY_READ, v_regs, 34 * sizeof(vector128))) + return -EFAULT; + if (tm_v_regs && !access_ok(VERIFY_READ, + tm_v_regs, 34 * sizeof(vector128))) + return -EFAULT; + /* Copy 33 vec registers (vr0..31 and vscr) from the stack */ + if (v_regs != 0 && tm_v_regs != 0 && (msr & MSR_VEC) != 0) { + err |= __copy_from_user(current->thread.vr, v_regs, + 33 * sizeof(vector128)); + err |= __copy_from_user(current->thread.transact_vr, tm_v_regs, + 33 * sizeof(vector128)); + } + else if (current->thread.used_vr) { + memset(current->thread.vr, 0, 33 * sizeof(vector128)); + memset(current->thread.transact_vr, 0, 33 * sizeof(vector128)); + } + /* Always get VRSAVE back */ + if (v_regs != 0 && tm_v_regs != 0) { + err |= __get_user(current->thread.vrsave, + (u32 __user *)&v_regs[33]); + err |= __get_user(current->thread.transact_vrsave, + (u32 __user *)&tm_v_regs[33]); + } + else { + current->thread.vrsave = 0; + current->thread.transact_vrsave = 0; + } +#endif /* CONFIG_ALTIVEC */ + /* restore floating point */ + err |= copy_fpr_from_user(current, &sc->fp_regs); + err |= copy_transact_fpr_from_user(current, &tm_sc->fp_regs); +#ifdef CONFIG_VSX + /* + * Get additional VSX data. Update v_regs to point after the + * VMX data. Copy VSX low doubleword from userspace to local + * buffer for formatting, then into the taskstruct. + */ + if (v_regs && ((msr & MSR_VSX) != 0)) { + v_regs += ELF_NVRREG; + tm_v_regs += ELF_NVRREG; + err |= copy_vsx_from_user(current, v_regs); + err |= copy_transact_vsx_from_user(current, tm_v_regs); + } else { + for (i = 0; i < 32 ; i++) { + current->thread.fpr[i][TS_VSRLOWOFFSET] = 0; + current->thread.transact_fpr[i][TS_VSRLOWOFFSET] = 0; + } + } +#endif + tm_enable(); + /* This loads the checkpointed FP/VEC state, if used */ + tm_recheckpoint(¤t->thread, msr); + /* The task has moved into TM state S, so ensure MSR reflects this: */ + regs->msr = (regs->msr & ~MSR_TS_MASK) | __MASK(33); + + /* This loads the speculative FP/VEC state, if used */ + if (msr & MSR_FP) { + do_load_up_transact_fpu(¤t->thread); + regs->msr |= (MSR_FP | current->thread.fpexc_mode); + } + if (msr & MSR_VEC) { + do_load_up_transact_altivec(¤t->thread); + regs->msr |= MSR_VEC; + } + + return err; +} +#endif + /* * Setup the trampoline code on the stack */ @@ -355,6 +645,9 @@ int sys_rt_sigreturn(unsigned long r3, unsigned long r4, unsigned long r5, { struct ucontext __user *uc = (struct ucontext __user *)regs->gpr[1]; sigset_t set; +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM + unsigned long msr; +#endif /* Always make any pending restarted system calls return -EINTR */ current_thread_info()->restart_block.fn = do_no_restart_syscall; @@ -365,6 +658,21 @@ int sys_rt_sigreturn(unsigned long r3, unsigned long r4, unsigned long r5, if (__copy_from_user(&set, &uc->uc_sigmask, sizeof(set))) goto badframe; set_current_blocked(&set); +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM + if (__get_user(msr, &uc->uc_mcontext.gp_regs[PT_MSR])) + goto badframe; + if (MSR_TM_SUSPENDED(msr)) { + /* We recheckpoint on return. */ + struct ucontext __user *uc_transact; + if (__get_user(uc_transact, &uc->uc_link)) + goto badframe; + if (restore_tm_sigcontexts(regs, &uc->uc_mcontext, + &uc_transact->uc_mcontext)) + goto badframe; + } + else + /* Fall through, for non-TM restore */ +#endif if (restore_sigcontext(regs, NULL, 1, &uc->uc_mcontext)) goto badframe; @@ -415,19 +723,42 @@ int handle_rt_signal64(int signr, struct k_sigaction *ka, siginfo_t *info, /* Create the ucontext. */ err |= __put_user(0, &frame->uc.uc_flags); - err |= __put_user(0, &frame->uc.uc_link); err |= __put_user(current->sas_ss_sp, &frame->uc.uc_stack.ss_sp); err |= __put_user(sas_ss_flags(regs->gpr[1]), &frame->uc.uc_stack.ss_flags); err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size); - err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, signr, NULL, - (unsigned long)ka->sa.sa_handler, 1); +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM + if (MSR_TM_ACTIVE(regs->msr)) { + /* The ucontext_t passed to userland points to the second + * ucontext_t (for transactional state) with its uc_link ptr. + */ + err |= __put_user(&frame->uc_transact, &frame->uc.uc_link); + err |= setup_tm_sigcontexts(&frame->uc.uc_mcontext, + &frame->uc_transact.uc_mcontext, + regs, signr, + NULL, + (unsigned long)ka->sa.sa_handler); + } else +#endif + { + err |= __put_user(0, &frame->uc.uc_link); + err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, signr, + NULL, (unsigned long)ka->sa.sa_handler, + 1); + } err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)); if (err) goto badframe; /* Make sure signal handler doesn't get spurious FP exceptions */ current->thread.fpscr.val = 0; +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM + /* Remove TM bits from thread's MSR. The MSR in the sigcontext + * just indicates to userland that we were doing a transaction, but we + * don't want to return in transactional state: + */ + regs->msr &= ~MSR_TS_MASK; +#endif /* Set up to return from userspace. */ if (vdso64_rt_sigtramp && current->mm->context.vdso_base) { |