diff options
Diffstat (limited to 'arch/powerpc/kernel/vio.c')
-rw-r--r-- | arch/powerpc/kernel/vio.c | 273 |
1 files changed, 234 insertions, 39 deletions
diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c index a3a99901c8e..cb87301ccd5 100644 --- a/arch/powerpc/kernel/vio.c +++ b/arch/powerpc/kernel/vio.c @@ -14,7 +14,9 @@ * 2 of the License, or (at your option) any later version. */ +#include <linux/cpu.h> #include <linux/types.h> +#include <linux/delay.h> #include <linux/stat.h> #include <linux/device.h> #include <linux/init.h> @@ -709,13 +711,26 @@ static int vio_cmo_bus_probe(struct vio_dev *viodev) struct vio_driver *viodrv = to_vio_driver(dev->driver); unsigned long flags; size_t size; + bool dma_capable = false; + + /* A device requires entitlement if it has a DMA window property */ + switch (viodev->family) { + case VDEVICE: + if (of_get_property(viodev->dev.of_node, + "ibm,my-dma-window", NULL)) + dma_capable = true; + break; + case PFO: + dma_capable = false; + break; + default: + dev_warn(dev, "unknown device family: %d\n", viodev->family); + BUG(); + break; + } - /* - * Check to see that device has a DMA window and configure - * entitlement for the device. - */ - if (of_get_property(viodev->dev.of_node, - "ibm,my-dma-window", NULL)) { + /* Configure entitlement for the device. */ + if (dma_capable) { /* Check that the driver is CMO enabled and get desired DMA */ if (!viodrv->get_desired_dma) { dev_err(dev, "%s: device driver does not support CMO\n", @@ -1050,6 +1065,94 @@ static void vio_cmo_sysfs_init(void) { } EXPORT_SYMBOL(vio_cmo_entitlement_update); EXPORT_SYMBOL(vio_cmo_set_dev_desired); + +/* + * Platform Facilities Option (PFO) support + */ + +/** + * vio_h_cop_sync - Perform a synchronous PFO co-processor operation + * + * @vdev - Pointer to a struct vio_dev for device + * @op - Pointer to a struct vio_pfo_op for the operation parameters + * + * Calls the hypervisor to synchronously perform the PFO operation + * described in @op. In the case of a busy response from the hypervisor, + * the operation will be re-submitted indefinitely unless a non-zero timeout + * is specified or an error occurs. The timeout places a limit on when to + * stop re-submitting a operation, the total time can be exceeded if an + * operation is in progress. + * + * If op->hcall_ret is not NULL, this will be set to the return from the + * last h_cop_op call or it will be 0 if an error not involving the h_call + * was encountered. + * + * Returns: + * 0 on success, + * -EINVAL if the h_call fails due to an invalid parameter, + * -E2BIG if the h_call can not be performed synchronously, + * -EBUSY if a timeout is specified and has elapsed, + * -EACCES if the memory area for data/status has been rescinded, or + * -EPERM if a hardware fault has been indicated + */ +int vio_h_cop_sync(struct vio_dev *vdev, struct vio_pfo_op *op) +{ + struct device *dev = &vdev->dev; + unsigned long deadline = 0; + long hret = 0; + int ret = 0; + + if (op->timeout) + deadline = jiffies + msecs_to_jiffies(op->timeout); + + while (true) { + hret = plpar_hcall_norets(H_COP, op->flags, + vdev->resource_id, + op->in, op->inlen, op->out, + op->outlen, op->csbcpb); + + if (hret == H_SUCCESS || + (hret != H_NOT_ENOUGH_RESOURCES && + hret != H_BUSY && hret != H_RESOURCE) || + (op->timeout && time_after(deadline, jiffies))) + break; + + dev_dbg(dev, "%s: hcall ret(%ld), retrying.\n", __func__, hret); + } + + switch (hret) { + case H_SUCCESS: + ret = 0; + break; + case H_OP_MODE: + case H_TOO_BIG: + ret = -E2BIG; + break; + case H_RESCINDED: + ret = -EACCES; + break; + case H_HARDWARE: + ret = -EPERM; + break; + case H_NOT_ENOUGH_RESOURCES: + case H_RESOURCE: + case H_BUSY: + ret = -EBUSY; + break; + default: + ret = -EINVAL; + break; + } + + if (ret) + dev_dbg(dev, "%s: Sync h_cop_op failure (ret:%d) (hret:%ld)\n", + __func__, ret, hret); + + op->hcall_err = hret; + return ret; +} +EXPORT_SYMBOL(vio_h_cop_sync); + static struct iommu_table *vio_build_iommu_table(struct vio_dev *dev) { const unsigned char *dma_window; @@ -1211,35 +1314,87 @@ static void __devinit vio_dev_release(struct device *dev) struct vio_dev *vio_register_device_node(struct device_node *of_node) { struct vio_dev *viodev; + struct device_node *parent_node; const unsigned int *unit_address; + const unsigned int *pfo_resid = NULL; + enum vio_dev_family family; + const char *of_node_name = of_node->name ? of_node->name : "<unknown>"; - /* we need the 'device_type' property, in order to match with drivers */ - if (of_node->type == NULL) { - printk(KERN_WARNING "%s: node %s missing 'device_type'\n", - __func__, - of_node->name ? of_node->name : "<unknown>"); + /* + * Determine if this node is a under the /vdevice node or under the + * /ibm,platform-facilities node. This decides the device's family. + */ + parent_node = of_get_parent(of_node); + if (parent_node) { + if (!strcmp(parent_node->full_name, "/ibm,platform-facilities")) + family = PFO; + else if (!strcmp(parent_node->full_name, "/vdevice")) + family = VDEVICE; + else { + pr_warn("%s: parent(%s) of %s not recognized.\n", + __func__, + parent_node->full_name, + of_node_name); + of_node_put(parent_node); + return NULL; + } + of_node_put(parent_node); + } else { + pr_warn("%s: could not determine the parent of node %s.\n", + __func__, of_node_name); return NULL; } - unit_address = of_get_property(of_node, "reg", NULL); - if (unit_address == NULL) { - printk(KERN_WARNING "%s: node %s missing 'reg'\n", - __func__, - of_node->name ? of_node->name : "<unknown>"); - return NULL; + if (family == PFO) { + if (of_get_property(of_node, "interrupt-controller", NULL)) { + pr_debug("%s: Skipping the interrupt controller %s.\n", + __func__, of_node_name); + return NULL; + } } /* allocate a vio_dev for this node */ viodev = kzalloc(sizeof(struct vio_dev), GFP_KERNEL); - if (viodev == NULL) + if (viodev == NULL) { + pr_warn("%s: allocation failure for VIO device.\n", __func__); return NULL; + } - viodev->irq = irq_of_parse_and_map(of_node, 0); + /* we need the 'device_type' property, in order to match with drivers */ + viodev->family = family; + if (viodev->family == VDEVICE) { + if (of_node->type != NULL) + viodev->type = of_node->type; + else { + pr_warn("%s: node %s is missing the 'device_type' " + "property.\n", __func__, of_node_name); + goto out; + } + + unit_address = of_get_property(of_node, "reg", NULL); + if (unit_address == NULL) { + pr_warn("%s: node %s missing 'reg'\n", + __func__, of_node_name); + goto out; + } + dev_set_name(&viodev->dev, "%x", *unit_address); + viodev->irq = irq_of_parse_and_map(of_node, 0); + viodev->unit_address = *unit_address; + } else { + /* PFO devices need their resource_id for submitting COP_OPs + * This is an optional field for devices, but is required when + * performing synchronous ops */ + pfo_resid = of_get_property(of_node, "ibm,resource-id", NULL); + if (pfo_resid != NULL) + viodev->resource_id = *pfo_resid; + + unit_address = NULL; + dev_set_name(&viodev->dev, "%s", of_node_name); + viodev->type = of_node_name; + viodev->irq = 0; + } - dev_set_name(&viodev->dev, "%x", *unit_address); viodev->name = of_node->name; - viodev->type = of_node->type; - viodev->unit_address = *unit_address; viodev->dev.of_node = of_node_get(of_node); if (firmware_has_feature(FW_FEATURE_CMO)) @@ -1267,16 +1422,51 @@ struct vio_dev *vio_register_device_node(struct device_node *of_node) } return viodev; + +out: /* Use this exit point for any return prior to device_register */ + kfree(viodev); + + return NULL; } EXPORT_SYMBOL(vio_register_device_node); +/* + * vio_bus_scan_for_devices - Scan OF and register each child device + * @root_name - OF node name for the root of the subtree to search. + * This must be non-NULL + * + * Starting from the root node provide, register the device node for + * each child beneath the root. + */ +static void vio_bus_scan_register_devices(char *root_name) +{ + struct device_node *node_root, *node_child; + + if (!root_name) + return; + + node_root = of_find_node_by_name(NULL, root_name); + if (node_root) { + + /* + * Create struct vio_devices for each virtual device in + * the device tree. Drivers will associate with them later. + */ + node_child = of_get_next_child(node_root, NULL); + while (node_child) { + vio_register_device_node(node_child); + node_child = of_get_next_child(node_root, node_child); + } + of_node_put(node_root); + } +} + /** * vio_bus_init: - Initialize the virtual IO bus */ static int __init vio_bus_init(void) { int err; - struct device_node *node_vroot; if (firmware_has_feature(FW_FEATURE_CMO)) vio_cmo_sysfs_init(); @@ -1301,19 +1491,8 @@ static int __init vio_bus_init(void) if (firmware_has_feature(FW_FEATURE_CMO)) vio_cmo_bus_init(); - node_vroot = of_find_node_by_name(NULL, "vdevice"); - if (node_vroot) { - struct device_node *of_node; - - /* - * Create struct vio_devices for each virtual device in - * the device tree. Drivers will associate with them later. - */ - for (of_node = node_vroot->child; of_node != NULL; - of_node = of_node->sibling) - vio_register_device_node(of_node); - of_node_put(node_vroot); - } + vio_bus_scan_register_devices("vdevice"); + vio_bus_scan_register_devices("ibm,platform-facilities"); return 0; } @@ -1436,12 +1615,28 @@ struct vio_dev *vio_find_node(struct device_node *vnode) { const uint32_t *unit_address; char kobj_name[20]; + struct device_node *vnode_parent; + const char *dev_type; + + vnode_parent = of_get_parent(vnode); + if (!vnode_parent) + return NULL; + + dev_type = of_get_property(vnode_parent, "device_type", NULL); + of_node_put(vnode_parent); + if (!dev_type) + return NULL; /* construct the kobject name from the device node */ - unit_address = of_get_property(vnode, "reg", NULL); - if (!unit_address) + if (!strcmp(dev_type, "vdevice")) { + unit_address = of_get_property(vnode, "reg", NULL); + if (!unit_address) + return NULL; + snprintf(kobj_name, sizeof(kobj_name), "%x", *unit_address); + } else if (!strcmp(dev_type, "ibm,platform-facilities")) + snprintf(kobj_name, sizeof(kobj_name), "%s", vnode->name); + else return NULL; - snprintf(kobj_name, sizeof(kobj_name), "%x", *unit_address); return vio_find_name(kobj_name); } |