diff options
Diffstat (limited to 'arch/powerpc/kernel')
| -rw-r--r-- | arch/powerpc/kernel/cputable.c | 13 | ||||
| -rw-r--r-- | arch/powerpc/kernel/entry_32.S | 5 | ||||
| -rw-r--r-- | arch/powerpc/kernel/head_44x.S | 502 | ||||
| -rw-r--r-- | arch/powerpc/kernel/misc_32.S | 9 | ||||
| -rw-r--r-- | arch/powerpc/kernel/smp.c | 8 |
5 files changed, 519 insertions, 18 deletions
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 8af4949434b..a1d84583972 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -1701,6 +1701,19 @@ static struct cpu_spec __initdata cpu_specs[] = { .machine_check = machine_check_440A, .platform = "ppc440", }, + { /* 476 core */ + .pvr_mask = 0xffff0000, + .pvr_value = 0x11a50000, + .cpu_name = "476", + .cpu_features = CPU_FTRS_47X, + .cpu_user_features = COMMON_USER_BOOKE | + PPC_FEATURE_HAS_FPU, + .mmu_features = MMU_FTR_TYPE_47x | + MMU_FTR_USE_TLBIVAX_BCAST | MMU_FTR_LOCK_BCAST_INVAL, + .icache_bsize = 32, + .dcache_bsize = 128, + .platform = "ppc470", + }, { /* default match */ .pvr_mask = 0x00000000, .pvr_value = 0x00000000, diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S index 1175a8539e6..ed4aeb96398 100644 --- a/arch/powerpc/kernel/entry_32.S +++ b/arch/powerpc/kernel/entry_32.S @@ -373,11 +373,13 @@ syscall_exit_cont: bnel- load_dbcr0 #endif #ifdef CONFIG_44x +BEGIN_MMU_FTR_SECTION lis r4,icache_44x_need_flush@ha lwz r5,icache_44x_need_flush@l(r4) cmplwi cr0,r5,0 bne- 2f 1: +END_MMU_FTR_SECTION_IFCLR(MMU_FTR_TYPE_47x) #endif /* CONFIG_44x */ BEGIN_FTR_SECTION lwarx r7,0,r1 @@ -848,6 +850,9 @@ resume_kernel: /* interrupts are hard-disabled at this point */ restore: #ifdef CONFIG_44x +BEGIN_MMU_FTR_SECTION + b 1f +END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_47x) lis r4,icache_44x_need_flush@ha lwz r5,icache_44x_need_flush@l(r4) cmplwi cr0,r5,0 diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S index 39be049a785..1acd175428c 100644 --- a/arch/powerpc/kernel/head_44x.S +++ b/arch/powerpc/kernel/head_44x.S @@ -37,6 +37,7 @@ #include <asm/thread_info.h> #include <asm/ppc_asm.h> #include <asm/asm-offsets.h> +#include <asm/synch.h> #include "head_booke.h" @@ -191,7 +192,7 @@ interrupt_base: #endif /* Data TLB Error Interrupt */ - START_EXCEPTION(DataTLBError) + START_EXCEPTION(DataTLBError44x) mtspr SPRN_SPRG_WSCRATCH0, r10 /* Save some working registers */ mtspr SPRN_SPRG_WSCRATCH1, r11 mtspr SPRN_SPRG_WSCRATCH2, r12 @@ -282,7 +283,7 @@ tlb_44x_patch_hwater_D: mfspr r10,SPRN_DEAR /* Jump to common tlb load */ - b finish_tlb_load + b finish_tlb_load_44x 2: /* The bailout. Restore registers to pre-exception conditions @@ -302,7 +303,7 @@ tlb_44x_patch_hwater_D: * information from different registers and bailout * to a different point. */ - START_EXCEPTION(InstructionTLBError) + START_EXCEPTION(InstructionTLBError44x) mtspr SPRN_SPRG_WSCRATCH0, r10 /* Save some working registers */ mtspr SPRN_SPRG_WSCRATCH1, r11 mtspr SPRN_SPRG_WSCRATCH2, r12 @@ -378,7 +379,7 @@ tlb_44x_patch_hwater_I: mfspr r10,SPRN_SRR0 /* Jump to common TLB load point */ - b finish_tlb_load + b finish_tlb_load_44x 2: /* The bailout. Restore registers to pre-exception conditions @@ -392,15 +393,7 @@ tlb_44x_patch_hwater_I: mfspr r10, SPRN_SPRG_RSCRATCH0 b InstructionStorage - /* Debug Interrupt */ - DEBUG_CRIT_EXCEPTION - -/* - * Local functions - */ - /* - * Both the instruction and data TLB miss get to this * point to load the TLB. * r10 - EA of fault @@ -410,7 +403,7 @@ tlb_44x_patch_hwater_I: * MMUCR - loaded with proper value when we get here * Upon exit, we reload everything and RFI. */ -finish_tlb_load: +finish_tlb_load_44x: /* Combine RPN & ERPN an write WS 0 */ rlwimi r11,r12,0,0,31-PAGE_SHIFT tlbwe r11,r13,PPC44x_TLB_XLAT @@ -443,6 +436,227 @@ finish_tlb_load: mfspr r10, SPRN_SPRG_RSCRATCH0 rfi /* Force context change */ +/* TLB error interrupts for 476 + */ +#ifdef CONFIG_PPC_47x + START_EXCEPTION(DataTLBError47x) + mtspr SPRN_SPRG_WSCRATCH0,r10 /* Save some working registers */ + mtspr SPRN_SPRG_WSCRATCH1,r11 + mtspr SPRN_SPRG_WSCRATCH2,r12 + mtspr SPRN_SPRG_WSCRATCH3,r13 + mfcr r11 + mtspr SPRN_SPRG_WSCRATCH4,r11 + mfspr r10,SPRN_DEAR /* Get faulting address */ + + /* If we are faulting a kernel address, we have to use the + * kernel page tables. + */ + lis r11,PAGE_OFFSET@h + cmplw cr0,r10,r11 + blt+ 3f + lis r11,swapper_pg_dir@h + ori r11,r11, swapper_pg_dir@l + li r12,0 /* MMUCR = 0 */ + b 4f + + /* Get the PGD for the current thread and setup MMUCR */ +3: mfspr r11,SPRN_SPRG3 + lwz r11,PGDIR(r11) + mfspr r12,SPRN_PID /* Get PID */ +4: mtspr SPRN_MMUCR,r12 /* Set MMUCR */ + + /* Mask of required permission bits. Note that while we + * do copy ESR:ST to _PAGE_RW position as trying to write + * to an RO page is pretty common, we don't do it with + * _PAGE_DIRTY. We could do it, but it's a fairly rare + * event so I'd rather take the overhead when it happens + * rather than adding an instruction here. We should measure + * whether the whole thing is worth it in the first place + * as we could avoid loading SPRN_ESR completely in the first + * place... + * + * TODO: Is it worth doing that mfspr & rlwimi in the first + * place or can we save a couple of instructions here ? + */ + mfspr r12,SPRN_ESR + li r13,_PAGE_PRESENT|_PAGE_ACCESSED + rlwimi r13,r12,10,30,30 + + /* Load the PTE */ + /* Compute pgdir/pmd offset */ + rlwinm r12,r10,PPC44x_PGD_OFF_SHIFT,PPC44x_PGD_OFF_MASK_BIT,29 + lwzx r11,r12,r11 /* Get pgd/pmd entry */ + + /* Word 0 is EPN,V,TS,DSIZ */ + li r12,PPC47x_TLB0_VALID | PPC47x_TLBE_SIZE + rlwimi r10,r12,0,32-PAGE_SHIFT,31 /* Insert valid and page size*/ + li r12,0 + tlbwe r10,r12,0 + + /* XXX can we do better ? Need to make sure tlbwe has established + * latch V bit in MMUCR0 before the PTE is loaded further down */ +#ifdef CONFIG_SMP + isync +#endif + + rlwinm. r12,r11,0,0,20 /* Extract pt base address */ + /* Compute pte address */ + rlwimi r12,r10,PPC44x_PTE_ADD_SHIFT,PPC44x_PTE_ADD_MASK_BIT,28 + beq 2f /* Bail if no table */ + lwz r11,0(r12) /* Get high word of pte entry */ + + /* XXX can we do better ? maybe insert a known 0 bit from r11 into the + * bottom of r12 to create a data dependency... We can also use r10 + * as destination nowadays + */ +#ifdef CONFIG_SMP + lwsync +#endif + lwz r12,4(r12) /* Get low word of pte entry */ + + andc. r13,r13,r12 /* Check permission */ + + /* Jump to common tlb load */ + beq finish_tlb_load_47x + +2: /* The bailout. Restore registers to pre-exception conditions + * and call the heavyweights to help us out. + */ + mfspr r11,SPRN_SPRG_RSCRATCH4 + mtcr r11 + mfspr r13,SPRN_SPRG_RSCRATCH3 + mfspr r12,SPRN_SPRG_RSCRATCH2 + mfspr r11,SPRN_SPRG_RSCRATCH1 + mfspr r10,SPRN_SPRG_RSCRATCH0 + b DataStorage + + /* Instruction TLB Error Interrupt */ + /* + * Nearly the same as above, except we get our + * information from different registers and bailout + * to a different point. + */ + START_EXCEPTION(InstructionTLBError47x) + mtspr SPRN_SPRG_WSCRATCH0,r10 /* Save some working registers */ + mtspr SPRN_SPRG_WSCRATCH1,r11 + mtspr SPRN_SPRG_WSCRATCH2,r12 + mtspr SPRN_SPRG_WSCRATCH3,r13 + mfcr r11 + mtspr SPRN_SPRG_WSCRATCH4,r11 + mfspr r10,SPRN_SRR0 /* Get faulting address */ + + /* If we are faulting a kernel address, we have to use the + * kernel page tables. + */ + lis r11,PAGE_OFFSET@h + cmplw cr0,r10,r11 + blt+ 3f + lis r11,swapper_pg_dir@h + ori r11,r11, swapper_pg_dir@l + li r12,0 /* MMUCR = 0 */ + b 4f + + /* Get the PGD for the current thread and setup MMUCR */ +3: mfspr r11,SPRN_SPRG_THREAD + lwz r11,PGDIR(r11) + mfspr r12,SPRN_PID /* Get PID */ +4: mtspr SPRN_MMUCR,r12 /* Set MMUCR */ + + /* Make up the required permissions */ + li r13,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_EXEC + + /* Load PTE */ + /* Compute pgdir/pmd offset */ + rlwinm r12,r10,PPC44x_PGD_OFF_SHIFT,PPC44x_PGD_OFF_MASK_BIT,29 + lwzx r11,r12,r11 /* Get pgd/pmd entry */ + + /* Word 0 is EPN,V,TS,DSIZ */ + li r12,PPC47x_TLB0_VALID | PPC47x_TLBE_SIZE + rlwimi r10,r12,0,32-PAGE_SHIFT,31 /* Insert valid and page size*/ + li r12,0 + tlbwe r10,r12,0 + + /* XXX can we do better ? Need to make sure tlbwe has established + * latch V bit in MMUCR0 before the PTE is loaded further down */ +#ifdef CONFIG_SMP + isync +#endif + + rlwinm. r12,r11,0,0,20 /* Extract pt base address */ + /* Compute pte address */ + rlwimi r12,r10,PPC44x_PTE_ADD_SHIFT,PPC44x_PTE_ADD_MASK_BIT,28 + beq 2f /* Bail if no table */ + + lwz r11,0(r12) /* Get high word of pte entry */ + /* XXX can we do better ? maybe insert a known 0 bit from r11 into the + * bottom of r12 to create a data dependency... We can also use r10 + * as destination nowadays + */ +#ifdef CONFIG_SMP + lwsync +#endif + lwz r12,4(r12) /* Get low word of pte entry */ + + andc. r13,r13,r12 /* Check permission */ + + /* Jump to common TLB load point */ + beq finish_tlb_load_47x + +2: /* The bailout. Restore registers to pre-exception conditions + * and call the heavyweights to help us out. + */ + mfspr r11, SPRN_SPRG_RSCRATCH4 + mtcr r11 + mfspr r13, SPRN_SPRG_RSCRATCH3 + mfspr r12, SPRN_SPRG_RSCRATCH2 + mfspr r11, SPRN_SPRG_RSCRATCH1 + mfspr r10, SPRN_SPRG_RSCRATCH0 + b InstructionStorage + +/* + * Both the instruction and data TLB miss get to this + * point to load the TLB. + * r10 - free to use + * r11 - PTE high word value + * r12 - PTE low word value + * r13 - free to use + * MMUCR - loaded with proper value when we get here + * Upon exit, we reload everything and RFI. + */ +finish_tlb_load_47x: + /* Combine RPN & ERPN an write WS 1 */ + rlwimi r11,r12,0,0,31-PAGE_SHIFT + tlbwe r11,r13,1 + + /* And make up word 2 */ + li r10,0xf85 /* Mask to apply from PTE */ + rlwimi r10,r12,29,30,30 /* DIRTY -> SW position */ + and r11,r12,r10 /* Mask PTE bits to keep */ + andi. r10,r12,_PAGE_USER /* User page ? */ + beq 1f /* nope, leave U bits empty */ + rlwimi r11,r11,3,26,28 /* yes, copy S bits to U */ +1: tlbwe r11,r13,2 + + /* Done...restore registers and get out of here. + */ + mfspr r11, SPRN_SPRG_RSCRATCH4 + mtcr r11 + mfspr r13, SPRN_SPRG_RSCRATCH3 + mfspr r12, SPRN_SPRG_RSCRATCH2 + mfspr r11, SPRN_SPRG_RSCRATCH1 + mfspr r10, SPRN_SPRG_RSCRATCH0 + rfi + +#endif /* CONFIG_PPC_47x */ + + /* Debug Interrupt */ + /* + * This statement needs to exist at the end of the IVPR + * definition just in case you end up taking a debug + * exception within another exception. + */ + DEBUG_CRIT_EXCEPTION + /* * Global functions */ @@ -491,9 +705,18 @@ _GLOBAL(set_context) /* * Init CPU state. This is called at boot time or for secondary CPUs * to setup initial TLB entries, setup IVORs, etc... + * */ _GLOBAL(init_cpu_state) mflr r22 +#ifdef CONFIG_PPC_47x + /* We use the PVR to differenciate 44x cores from 476 */ + mfspr r3,SPRN_PVR + srwi r3,r3,16 + cmplwi cr0,r3,PVR_476@h + beq head_start_47x +#endif /* CONFIG_PPC_47x */ + /* * In case the firmware didn't do it, we apply some workarounds * that are good for all 440 core variants here @@ -506,7 +729,7 @@ _GLOBAL(init_cpu_state) sync /* - * Set up the initial MMU state + * Set up the initial MMU state for 44x * * We are still executing code at the virtual address * mappings set by the firmware for the base of RAM. @@ -646,16 +869,257 @@ skpinv: addi r4,r4,1 /* Increment */ SET_IVOR(10, Decrementer); SET_IVOR(11, FixedIntervalTimer); SET_IVOR(12, WatchdogTimer); - SET_IVOR(13, DataTLBError); - SET_IVOR(14, InstructionTLBError); + SET_IVOR(13, DataTLBError44x); + SET_IVOR(14, InstructionTLBError44x); SET_IVOR(15, DebugCrit); + b head_start_common + + +#ifdef CONFIG_PPC_47x + +#ifdef CONFIG_SMP + +/* Entry point for secondary 47x processors */ +_GLOBAL(start_secondary_47x) + mr r24,r3 /* CPU number */ + + bl init_cpu_state + + /* Now we need to bolt the rest of kernel memory which + * is done in C code. We must be careful because our task + * struct or our stack can (and will probably) be out + * of reach of the initial 256M TLB entry, so we use a + * small temporary stack in .bss for that. This works + * because only one CPU at a time can be in this code + */ + lis r1,temp_boot_stack@h + ori r1,r1,temp_boot_stack@l + addi r1,r1,1024-STACK_FRAME_OVERHEAD + li r0,0 + stw r0,0(r1) + bl mmu_init_secondary + + /* Now we can get our task struct and real stack pointer */ + + /* Get current_thread_info and current */ + lis r1,secondary_ti@ha + lwz r1,secondary_ti@l(r1) + lwz r2,TI_TASK(r1) + + /* Current stack pointer */ + addi r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD + li r0,0 + stw r0,0(r1) + + /* Kernel stack for exception entry in SPRG3 */ + addi r4,r2,THREAD /* init task's THREAD */ + mtspr SPRN_SPRG3,r4 + + b start_secondary + +#endif /* CONFIG_SMP */ + +/* + * Set up the initial MMU state for 44x + * + * We are still executing code at the virtual address + * mappings set by the firmware for the base of RAM. + */ + +head_start_47x: + /* Load our current PID->MMUCR TID and MSR IS->MMUCR STS */ + mfspr r3,SPRN_PID /* Get PID */ + mfmsr r4 /* Get MSR */ + andi. r4,r4,MSR_IS@l /* TS=1? */ + beq 1f /* If not, leave STS=0 */ + oris r3,r3,PPC47x_MMUCR_STS@h /* Set STS=1 */ +1: mtspr SPRN_MMUCR,r3 /* Put MMUCR */ + sync + + /* Find the entry we are running from */ + bl 1f +1: mflr r23 + tlbsx r23,0,r23 + tlbre r24,r23,0 + tlbre r25,r23,1 + tlbre r26,r23,2 + +/* + * Cleanup time + */ + + /* Initialize MMUCR */ + li r5,0 + mtspr SPRN_MMUCR,r5 + sync + +clear_all_utlb_entries: + + #; Set initial values. + + addis r3,0,0x8000 + addi r4,0,0 + addi r5,0,0 + b clear_utlb_entry + + #; Align the loop to speed things up. + + .align 6 + +clear_utlb_entry: + + tlbwe r4,r3,0 + tlbwe r5,r3,1 + tlbwe r5,r3,2 + addis r3,r3,0x2000 + cmpwi r3,0 + bne clear_utlb_entry + addis r3,0,0x8000 + addis r4,r4,0x100 + cmpwi r4,0 + bne clear_utlb_entry + + #; Restore original entry. + + oris r23,r23,0x8000 /* specify the way */ + tlbwe r24,r23,0 + tlbwe r25,r23,1 + tlbwe r26,r23,2 + +/* + * Configure and load pinned entry into TLB for the kernel core + */ + + lis r3,PAGE_OFFSET@h + ori r3,r3,PAGE_OFFSET@l + + /* Kernel is at the base of RAM */ + li r4, 0 /* Load the kernel physical address */ + + /* Load the kernel PID = 0 */ + li r0,0 + mtspr SPRN_PID,r0 + sync + + /* Word 0 */ + clrrwi r3,r3,12 /* Mask off the effective page number */ + ori r3,r3,PPC47x_TLB0_VALID | PPC47x_TLB0_256M + + /* Word 1 */ + clrrwi r4,r4,12 /* Mask off the real page number */ + /* ERPN is 0 for first 4GB page */ + /* Word 2 */ + li r5,0 + ori r5,r5,PPC47x_TLB2_S_RWX +#ifdef CONFIG_SMP + ori r5,r5,PPC47x_TLB2_M +#endif + + /* We write to way 0 and bolted 0 */ + lis r0,0x8800 + tlbwe r3,r0,0 + tlbwe r4,r0,1 + tlbwe r5,r0,2 + +/* + * Configure SSPCR, ISPCR and USPCR for now to search everything, we can fix + * them up later + */ + LOAD_REG_IMMEDIATE(r3, 0x9abcdef0) + mtspr SPRN_SSPCR,r3 + mtspr SPRN_USPCR,r3 + LOAD_REG_IMMEDIATE(r3, 0x12345670) + mtspr SPRN_ISPCR,r3 + + /* Force context change */ + mfmsr r0 + mtspr SPRN_SRR1, r0 + lis r0,3f@h + ori r0,r0,3f@l + mtspr SPRN_SRR0,r0 + sync + rfi + + /* Invalidate original entry we used */ +3: + rlwinm r24,r24,0,21,19 /* clear the "valid" bit */ + tlbwe r24,r23,0 + addi r24,0,0 + tlbwe r24,r23,1 + tlbwe r24,r23,2 + isync /* Clear out the shadow TLB entries */ + +#ifdef CONFIG_PPC_EARLY_DEBUG_44x + /* Add UART mapping for early debug. */ + + /* Word 0 */ + lis r3,PPC44x_EARLY_DEBUG_VIRTADDR@h + ori r3,r3,PPC47x_TLB0_VALID | PPC47x_TLB0_TS | PPC47x_TLB0_1M + + /* Word 1 */ + lis r4,CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW@h + ori r4,r4,CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH + + /* Word 2 */ + li r5,(PPC47x_TLB2_S_RW | PPC47x_TLB2_IMG) + + /* Bolted in way 0, bolt slot 5, we -hope- we don't hit the same + * congruence class as the kernel, we need to make sure of it at + * some point + */ + lis r0,0x8d00 + tlbwe r3,r0,0 + tlbwe r4,r0,1 + tlbwe r5,r0,2 + + /* Force context change */ + isync +#endif /* CONFIG_PPC_EARLY_DEBUG_44x */ + + /* Establish the interrupt vector offsets */ + SET_IVOR(0, CriticalInput); + SET_IVOR(1, MachineCheckA); + SET_IVOR(2, DataStorage); + SET_IVOR(3, InstructionStorage); + SET_IVOR(4, ExternalInput); + SET_IVOR(5, Alignment); + SET_IVOR(6, Program); + SET_IVOR(7, FloatingPointUnavailable); + SET_IVOR(8, SystemCall); + SET_IVOR(9, AuxillaryProcessorUnavailable); + SET_IVOR(10, Decrementer); + SET_IVOR(11, FixedIntervalTimer); + SET_IVOR(12, WatchdogTimer); + SET_IVOR(13, DataTLBError47x); + SET_IVOR(14, InstructionTLBError47x); + SET_IVOR(15, DebugCrit); + + /* We configure icbi to invalidate 128 bytes at a time since the + * current 32-bit kernel code isn't too happy with icache != dcache + * block size + */ + mfspr r3,SPRN_CCR0 + oris r3,r3,0x0020 + mtspr SPRN_CCR0,r3 + isync + +#endif /* CONFIG_PPC_47x */ + +/* + * Here we are back to code that is common between 44x and 47x + * + * We proceed to further kernel initialization and return to the + * main kernel entry + */ +head_start_common: /* Establish the interrupt vector base */ lis r4,interrupt_base@h /* IVPR only uses the high 16-bits */ mtspr SPRN_IVPR,r4 addis r22,r22,KERNELBASE@h mtlr r22 + isync blr /* @@ -683,3 +1147,9 @@ swapper_pg_dir: */ abatron_pteptrs: .space 8 + +#ifdef CONFIG_SMP + .align 12 +temp_boot_stack: + .space 1024 +#endif /* CONFIG_SMP */ diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S index 8649f536f8d..8043d1b73cf 100644 --- a/arch/powerpc/kernel/misc_32.S +++ b/arch/powerpc/kernel/misc_32.S @@ -441,7 +441,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE) addi r3,r3,L1_CACHE_BYTES bdnz 0b sync -#ifndef CONFIG_44x +#ifdef CONFIG_44x /* We don't flush the icache on 44x. Those have a virtual icache * and we don't have access to the virtual address here (it's * not the page vaddr but where it's mapped in user space). The @@ -449,15 +449,19 @@ END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE) * a change in the address space occurs, before returning to * user space */ +BEGIN_MMU_FTR_SECTION + blr +END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_44x) +#endif /* CONFIG_44x */ mtctr r4 1: icbi 0,r6 addi r6,r6,L1_CACHE_BYTES bdnz 1b sync isync -#endif /* CONFIG_44x */ blr +#ifndef CONFIG_BOOKE /* * Flush a particular page from the data cache to RAM, identified * by its physical address. We turn off the MMU so we can just use @@ -490,6 +494,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE) mtmsr r10 /* restore DR */ isync blr +#endif /* CONFIG_BOOKE */ /* * Clear pages using the dcbz instruction, which doesn't cause any diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index e36f94f7411..3fe4de2b685 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -495,6 +495,14 @@ int __devinit start_secondary(void *unused) current->active_mm = &init_mm; smp_store_cpu_info(cpu); + +#if defined(CONFIG_BOOKE) || defined(CONFIG_40x) + /* Clear any pending timer interrupts */ + mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS); + + /* Enable decrementer interrupt */ + mtspr(SPRN_TCR, TCR_DIE); +#endif set_dec(tb_ticks_per_jiffy); preempt_disable(); cpu_callin_map[cpu] = 1; |