diff options
Diffstat (limited to 'arch/powerpc/kvm/book3s_segment.S')
| -rw-r--r-- | arch/powerpc/kvm/book3s_segment.S | 112 |
1 files changed, 92 insertions, 20 deletions
diff --git a/arch/powerpc/kvm/book3s_segment.S b/arch/powerpc/kvm/book3s_segment.S index 678b6be3169..0676ae249b9 100644 --- a/arch/powerpc/kvm/book3s_segment.S +++ b/arch/powerpc/kvm/book3s_segment.S @@ -23,6 +23,7 @@ #define GET_SHADOW_VCPU(reg) \ mr reg, r13 +#define MTMSR_EERI(reg) mtmsrd (reg),1 #elif defined(CONFIG_PPC_BOOK3S_32) @@ -30,6 +31,7 @@ tophys(reg, r2); \ lwz reg, (THREAD + THREAD_KVM_SVCPU)(reg); \ tophys(reg, reg) +#define MTMSR_EERI(reg) mtmsr (reg) #endif @@ -57,10 +59,12 @@ kvmppc_handler_trampoline_enter: /* Required state: * * MSR = ~IR|DR - * R13 = PACA * R1 = host R1 * R2 = host R2 - * R10 = guest MSR + * R4 = guest shadow MSR + * R5 = normal host MSR + * R6 = current host MSR (EE, IR, DR off) + * LR = highmem guest exit code * all other volatile GPRS = free * SVCPU[CR] = guest CR * SVCPU[XER] = guest XER @@ -71,15 +75,15 @@ kvmppc_handler_trampoline_enter: /* r3 = shadow vcpu */ GET_SHADOW_VCPU(r3) + /* Save guest exit handler address and MSR */ + mflr r0 + PPC_STL r0, HSTATE_VMHANDLER(r3) + PPC_STL r5, HSTATE_HOST_MSR(r3) + /* Save R1/R2 in the PACA (64-bit) or shadow_vcpu (32-bit) */ PPC_STL r1, HSTATE_HOST_R1(r3) PPC_STL r2, HSTATE_HOST_R2(r3) - /* Move SRR0 and SRR1 into the respective regs */ - PPC_LL r9, SVCPU_PC(r3) - mtsrr0 r9 - mtsrr1 r10 - /* Activate guest mode, so faults get handled by KVM */ li r11, KVM_GUEST_MODE_GUEST stb r11, HSTATE_IN_GUEST(r3) @@ -87,17 +91,46 @@ kvmppc_handler_trampoline_enter: /* Switch to guest segment. This is subarch specific. */ LOAD_GUEST_SEGMENTS +#ifdef CONFIG_PPC_BOOK3S_64 + /* Some guests may need to have dcbz set to 32 byte length. + * + * Usually we ensure that by patching the guest's instructions + * to trap on dcbz and emulate it in the hypervisor. + * + * If we can, we should tell the CPU to use 32 byte dcbz though, + * because that's a lot faster. + */ + lbz r0, HSTATE_RESTORE_HID5(r3) + cmpwi r0, 0 + beq no_dcbz32_on + + mfspr r0,SPRN_HID5 + ori r0, r0, 0x80 /* XXX HID5_dcbz32 = 0x80 */ + mtspr SPRN_HID5,r0 +no_dcbz32_on: + +#endif /* CONFIG_PPC_BOOK3S_64 */ + /* Enter guest */ - PPC_LL r4, SVCPU_CTR(r3) - PPC_LL r5, SVCPU_LR(r3) - lwz r6, SVCPU_CR(r3) - lwz r7, SVCPU_XER(r3) + PPC_LL r8, SVCPU_CTR(r3) + PPC_LL r9, SVCPU_LR(r3) + lwz r10, SVCPU_CR(r3) + lwz r11, SVCPU_XER(r3) + + mtctr r8 + mtlr r9 + mtcr r10 + mtxer r11 - mtctr r4 - mtlr r5 - mtcr r6 - mtxer r7 + /* Move SRR0 and SRR1 into the respective regs */ + PPC_LL r9, SVCPU_PC(r3) + /* First clear RI in our current MSR value */ + li r0, MSR_RI + andc r6, r6, r0 + MTMSR_EERI(r6) + mtsrr0 r9 + mtsrr1 r4 PPC_LL r0, SVCPU_R0(r3) PPC_LL r1, SVCPU_R1(r3) @@ -259,6 +292,43 @@ no_ld_last_inst: /* Switch back to host MMU */ LOAD_HOST_SEGMENTS +#ifdef CONFIG_PPC_BOOK3S_64 + + lbz r5, HSTATE_RESTORE_HID5(r13) + cmpwi r5, 0 + beq no_dcbz32_off + + li r4, 0 + mfspr r5,SPRN_HID5 + rldimi r5,r4,6,56 + mtspr SPRN_HID5,r5 + +no_dcbz32_off: + +#endif /* CONFIG_PPC_BOOK3S_64 */ + + /* + * For some interrupts, we need to call the real Linux + * handler, so it can do work for us. This has to happen + * as if the interrupt arrived from the kernel though, + * so let's fake it here where most state is restored. + * + * Having set up SRR0/1 with the address where we want + * to continue with relocation on (potentially in module + * space), we either just go straight there with rfi[d], + * or we jump to an interrupt handler with bctr if there + * is an interrupt to be handled first. In the latter + * case, the rfi[d] at the end of the interrupt handler + * will get us back to where we want to continue. + */ + + cmpwi r12, BOOK3S_INTERRUPT_EXTERNAL + beq 1f + cmpwi r12, BOOK3S_INTERRUPT_DECREMENTER + beq 1f + cmpwi r12, BOOK3S_INTERRUPT_PERFMON +1: mtctr r12 + /* Register usage at this point: * * R1 = host R1 @@ -269,13 +339,15 @@ no_ld_last_inst: * */ - /* RFI into the highmem handler */ - mfmsr r7 - ori r7, r7, MSR_IR|MSR_DR|MSR_RI|MSR_ME /* Enable paging */ - mtsrr1 r7 - /* Load highmem handler address */ + PPC_LL r6, HSTATE_HOST_MSR(r13) PPC_LL r8, HSTATE_VMHANDLER(r13) + + /* Restore host msr -> SRR1 */ + mtsrr1 r6 + /* Load highmem handler address */ mtsrr0 r8 + /* RFI into the highmem handler, or jump to interrupt handler */ + beqctr RFI kvmppc_handler_trampoline_exit_end: |