diff options
Diffstat (limited to 'arch/powerpc/mm/fsl_booke_mmu.c')
| -rw-r--r-- | arch/powerpc/mm/fsl_booke_mmu.c | 237 |
1 files changed, 237 insertions, 0 deletions
diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c new file mode 100644 index 00000000000..5d581bb3aa1 --- /dev/null +++ b/arch/powerpc/mm/fsl_booke_mmu.c @@ -0,0 +1,237 @@ +/* + * Modifications by Kumar Gala (galak@kernel.crashing.org) to support + * E500 Book E processors. + * + * Copyright 2004 Freescale Semiconductor, Inc + * + * This file contains the routines for initializing the MMU + * on the 4xx series of chips. + * -- paulus + * + * Derived from arch/ppc/mm/init.c: + * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) + * + * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au) + * and Cort Dougan (PReP) (cort@cs.nmt.edu) + * Copyright (C) 1996 Paul Mackerras + * Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk). + * + * Derived from "arch/i386/mm/init.c" + * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ + +#include <linux/config.h> +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/string.h> +#include <linux/types.h> +#include <linux/ptrace.h> +#include <linux/mman.h> +#include <linux/mm.h> +#include <linux/swap.h> +#include <linux/stddef.h> +#include <linux/vmalloc.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/highmem.h> + +#include <asm/pgalloc.h> +#include <asm/prom.h> +#include <asm/io.h> +#include <asm/mmu_context.h> +#include <asm/pgtable.h> +#include <asm/mmu.h> +#include <asm/uaccess.h> +#include <asm/smp.h> +#include <asm/bootx.h> +#include <asm/machdep.h> +#include <asm/setup.h> + +extern void loadcam_entry(unsigned int index); +unsigned int tlbcam_index; +unsigned int num_tlbcam_entries; +static unsigned long __cam0, __cam1, __cam2; +extern unsigned long total_lowmem; +extern unsigned long __max_low_memory; +#define MAX_LOW_MEM CONFIG_LOWMEM_SIZE + +#define NUM_TLBCAMS (16) + +struct tlbcam { + u32 MAS0; + u32 MAS1; + u32 MAS2; + u32 MAS3; + u32 MAS7; +} TLBCAM[NUM_TLBCAMS]; + +struct tlbcamrange { + unsigned long start; + unsigned long limit; + phys_addr_t phys; +} tlbcam_addrs[NUM_TLBCAMS]; + +extern unsigned int tlbcam_index; + +/* + * Return PA for this VA if it is mapped by a CAM, or 0 + */ +unsigned long v_mapped_by_tlbcam(unsigned long va) +{ + int b; + for (b = 0; b < tlbcam_index; ++b) + if (va >= tlbcam_addrs[b].start && va < tlbcam_addrs[b].limit) + return tlbcam_addrs[b].phys + (va - tlbcam_addrs[b].start); + return 0; +} + +/* + * Return VA for a given PA or 0 if not mapped + */ +unsigned long p_mapped_by_tlbcam(unsigned long pa) +{ + int b; + for (b = 0; b < tlbcam_index; ++b) + if (pa >= tlbcam_addrs[b].phys + && pa < (tlbcam_addrs[b].limit-tlbcam_addrs[b].start) + +tlbcam_addrs[b].phys) + return tlbcam_addrs[b].start+(pa-tlbcam_addrs[b].phys); + return 0; +} + +/* + * Set up one of the I/D BAT (block address translation) register pairs. + * The parameters are not checked; in particular size must be a power + * of 4 between 4k and 256M. + */ +void settlbcam(int index, unsigned long virt, phys_addr_t phys, + unsigned int size, int flags, unsigned int pid) +{ + unsigned int tsize, lz; + + asm ("cntlzw %0,%1" : "=r" (lz) : "r" (size)); + tsize = (21 - lz) / 2; + +#ifdef CONFIG_SMP + if ((flags & _PAGE_NO_CACHE) == 0) + flags |= _PAGE_COHERENT; +#endif + + TLBCAM[index].MAS0 = MAS0_TLBSEL(1) | MAS0_ESEL(index) | MAS0_NV(index+1); + TLBCAM[index].MAS1 = MAS1_VALID | MAS1_IPROT | MAS1_TSIZE(tsize) | MAS1_TID(pid); + TLBCAM[index].MAS2 = virt & PAGE_MASK; + + TLBCAM[index].MAS2 |= (flags & _PAGE_WRITETHRU) ? MAS2_W : 0; + TLBCAM[index].MAS2 |= (flags & _PAGE_NO_CACHE) ? MAS2_I : 0; + TLBCAM[index].MAS2 |= (flags & _PAGE_COHERENT) ? MAS2_M : 0; + TLBCAM[index].MAS2 |= (flags & _PAGE_GUARDED) ? MAS2_G : 0; + TLBCAM[index].MAS2 |= (flags & _PAGE_ENDIAN) ? MAS2_E : 0; + + TLBCAM[index].MAS3 = (phys & PAGE_MASK) | MAS3_SX | MAS3_SR; + TLBCAM[index].MAS3 |= ((flags & _PAGE_RW) ? MAS3_SW : 0); + +#ifndef CONFIG_KGDB /* want user access for breakpoints */ + if (flags & _PAGE_USER) { + TLBCAM[index].MAS3 |= MAS3_UX | MAS3_UR; + TLBCAM[index].MAS3 |= ((flags & _PAGE_RW) ? MAS3_UW : 0); + } +#else + TLBCAM[index].MAS3 |= MAS3_UX | MAS3_UR; + TLBCAM[index].MAS3 |= ((flags & _PAGE_RW) ? MAS3_UW : 0); +#endif + + tlbcam_addrs[index].start = virt; + tlbcam_addrs[index].limit = virt + size - 1; + tlbcam_addrs[index].phys = phys; + + loadcam_entry(index); +} + +void invalidate_tlbcam_entry(int index) +{ + TLBCAM[index].MAS0 = MAS0_TLBSEL(1) | MAS0_ESEL(index); + TLBCAM[index].MAS1 = ~MAS1_VALID; + + loadcam_entry(index); +} + +void __init cam_mapin_ram(unsigned long cam0, unsigned long cam1, + unsigned long cam2) +{ + settlbcam(0, KERNELBASE, PPC_MEMSTART, cam0, _PAGE_KERNEL, 0); + tlbcam_index++; + if (cam1) { + tlbcam_index++; + settlbcam(1, KERNELBASE+cam0, PPC_MEMSTART+cam0, cam1, _PAGE_KERNEL, 0); + } + if (cam2) { + tlbcam_index++; + settlbcam(2, KERNELBASE+cam0+cam1, PPC_MEMSTART+cam0+cam1, cam2, _PAGE_KERNEL, 0); + } +} + +/* + * MMU_init_hw does the chip-specific initialization of the MMU hardware. + */ +void __init MMU_init_hw(void) +{ + flush_instruction_cache(); +} + +unsigned long __init mmu_mapin_ram(void) +{ + cam_mapin_ram(__cam0, __cam1, __cam2); + + return __cam0 + __cam1 + __cam2; +} + + +void __init +adjust_total_lowmem(void) +{ + unsigned long max_low_mem = MAX_LOW_MEM; + unsigned long cam_max = 0x10000000; + unsigned long ram; + + /* adjust CAM size to max_low_mem */ + if (max_low_mem < cam_max) + cam_max = max_low_mem; + + /* adjust lowmem size to max_low_mem */ + if (max_low_mem < total_lowmem) + ram = max_low_mem; + else + ram = total_lowmem; + + /* Calculate CAM values */ + __cam0 = 1UL << 2 * (__ilog2(ram) / 2); + if (__cam0 > cam_max) + __cam0 = cam_max; + ram -= __cam0; + if (ram) { + __cam1 = 1UL << 2 * (__ilog2(ram) / 2); + if (__cam1 > cam_max) + __cam1 = cam_max; + ram -= __cam1; + } + if (ram) { + __cam2 = 1UL << 2 * (__ilog2(ram) / 2); + if (__cam2 > cam_max) + __cam2 = cam_max; + ram -= __cam2; + } + + printk(KERN_INFO "Memory CAM mapping: CAM0=%ldMb, CAM1=%ldMb," + " CAM2=%ldMb residual: %ldMb\n", + __cam0 >> 20, __cam1 >> 20, __cam2 >> 20, + (total_lowmem - __cam0 - __cam1 - __cam2) >> 20); + __max_low_memory = max_low_mem = __cam0 + __cam1 + __cam2; +} |