diff options
Diffstat (limited to 'arch/powerpc/mm/hash_low_64.S')
-rw-r--r-- | arch/powerpc/mm/hash_low_64.S | 288 |
1 files changed, 288 insertions, 0 deletions
diff --git a/arch/powerpc/mm/hash_low_64.S b/arch/powerpc/mm/hash_low_64.S new file mode 100644 index 00000000000..d6ed9102eee --- /dev/null +++ b/arch/powerpc/mm/hash_low_64.S @@ -0,0 +1,288 @@ +/* + * ppc64 MMU hashtable management routines + * + * (c) Copyright IBM Corp. 2003 + * + * Maintained by: Benjamin Herrenschmidt + * <benh@kernel.crashing.org> + * + * This file is covered by the GNU Public Licence v2 as + * described in the kernel's COPYING file. + */ + +#include <asm/reg.h> +#include <asm/pgtable.h> +#include <asm/mmu.h> +#include <asm/page.h> +#include <asm/types.h> +#include <asm/ppc_asm.h> +#include <asm/asm-offsets.h> +#include <asm/cputable.h> + + .text + +/* + * Stackframe: + * + * +-> Back chain (SP + 256) + * | General register save area (SP + 112) + * | Parameter save area (SP + 48) + * | TOC save area (SP + 40) + * | link editor doubleword (SP + 32) + * | compiler doubleword (SP + 24) + * | LR save area (SP + 16) + * | CR save area (SP + 8) + * SP ---> +-- Back chain (SP + 0) + */ +#define STACKFRAMESIZE 256 + +/* Save parameters offsets */ +#define STK_PARM(i) (STACKFRAMESIZE + 48 + ((i)-3)*8) + +/* Save non-volatile offsets */ +#define STK_REG(i) (112 + ((i)-14)*8) + +/* + * _hash_page(unsigned long ea, unsigned long access, unsigned long vsid, + * pte_t *ptep, unsigned long trap, int local) + * + * Adds a page to the hash table. This is the non-LPAR version for now + */ + +_GLOBAL(__hash_page) + mflr r0 + std r0,16(r1) + stdu r1,-STACKFRAMESIZE(r1) + /* Save all params that we need after a function call */ + std r6,STK_PARM(r6)(r1) + std r8,STK_PARM(r8)(r1) + + /* Add _PAGE_PRESENT to access */ + ori r4,r4,_PAGE_PRESENT + + /* Save non-volatile registers. + * r31 will hold "old PTE" + * r30 is "new PTE" + * r29 is "va" + * r28 is a hash value + * r27 is hashtab mask (maybe dynamic patched instead ?) + */ + std r27,STK_REG(r27)(r1) + std r28,STK_REG(r28)(r1) + std r29,STK_REG(r29)(r1) + std r30,STK_REG(r30)(r1) + std r31,STK_REG(r31)(r1) + + /* Step 1: + * + * Check permissions, atomically mark the linux PTE busy + * and hashed. + */ +1: + ldarx r31,0,r6 + /* Check access rights (access & ~(pte_val(*ptep))) */ + andc. r0,r4,r31 + bne- htab_wrong_access + /* Check if PTE is busy */ + andi. r0,r31,_PAGE_BUSY + /* If so, just bail out and refault if needed. Someone else + * is changing this PTE anyway and might hash it. + */ + bne- bail_ok + /* Prepare new PTE value (turn access RW into DIRTY, then + * add BUSY,HASHPTE and ACCESSED) + */ + rlwinm r30,r4,32-9+7,31-7,31-7 /* _PAGE_RW -> _PAGE_DIRTY */ + or r30,r30,r31 + ori r30,r30,_PAGE_BUSY | _PAGE_ACCESSED | _PAGE_HASHPTE + /* Write the linux PTE atomically (setting busy) */ + stdcx. r30,0,r6 + bne- 1b + isync + + /* Step 2: + * + * Insert/Update the HPTE in the hash table. At this point, + * r4 (access) is re-useable, we use it for the new HPTE flags + */ + + /* Calc va and put it in r29 */ + rldicr r29,r5,28,63-28 + rldicl r3,r3,0,36 + or r29,r3,r29 + + /* Calculate hash value for primary slot and store it in r28 */ + rldicl r5,r5,0,25 /* vsid & 0x0000007fffffffff */ + rldicl r0,r3,64-12,48 /* (ea >> 12) & 0xffff */ + xor r28,r5,r0 + + /* Convert linux PTE bits into HW equivalents */ + andi. r3,r30,0x1fe /* Get basic set of flags */ + xori r3,r3,HW_NO_EXEC /* _PAGE_EXEC -> NOEXEC */ + rlwinm r0,r30,32-9+1,30,30 /* _PAGE_RW -> _PAGE_USER (r0) */ + rlwinm r4,r30,32-7+1,30,30 /* _PAGE_DIRTY -> _PAGE_USER (r4) */ + and r0,r0,r4 /* _PAGE_RW & _PAGE_DIRTY -> r0 bit 30 */ + andc r0,r30,r0 /* r0 = pte & ~r0 */ + rlwimi r3,r0,32-1,31,31 /* Insert result into PP lsb */ + + /* We eventually do the icache sync here (maybe inline that + * code rather than call a C function...) + */ +BEGIN_FTR_SECTION + mr r4,r30 + mr r5,r7 + bl .hash_page_do_lazy_icache +END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FTR_COHERENT_ICACHE, CPU_FTR_NOEXECUTE) + + /* At this point, r3 contains new PP bits, save them in + * place of "access" in the param area (sic) + */ + std r3,STK_PARM(r4)(r1) + + /* Get htab_hash_mask */ + ld r4,htab_hash_mask@got(2) + ld r27,0(r4) /* htab_hash_mask -> r27 */ + + /* Check if we may already be in the hashtable, in this case, we + * go to out-of-line code to try to modify the HPTE + */ + andi. r0,r31,_PAGE_HASHPTE + bne htab_modify_pte + +htab_insert_pte: + /* Clear hpte bits in new pte (we also clear BUSY btw) and + * add _PAGE_HASHPTE + */ + lis r0,_PAGE_HPTEFLAGS@h + ori r0,r0,_PAGE_HPTEFLAGS@l + andc r30,r30,r0 + ori r30,r30,_PAGE_HASHPTE + + /* page number in r5 */ + rldicl r5,r31,64-PTE_SHIFT,PTE_SHIFT + + /* Calculate primary group hash */ + and r0,r28,r27 + rldicr r3,r0,3,63-3 /* r0 = (hash & mask) << 3 */ + + /* Call ppc_md.hpte_insert */ + ld r7,STK_PARM(r4)(r1) /* Retreive new pp bits */ + mr r4,r29 /* Retreive va */ + li r6,0 /* no vflags */ +_GLOBAL(htab_call_hpte_insert1) + bl . /* Will be patched by htab_finish_init() */ + cmpdi 0,r3,0 + bge htab_pte_insert_ok /* Insertion successful */ + cmpdi 0,r3,-2 /* Critical failure */ + beq- htab_pte_insert_failure + + /* Now try secondary slot */ + + /* page number in r5 */ + rldicl r5,r31,64-PTE_SHIFT,PTE_SHIFT + + /* Calculate secondary group hash */ + andc r0,r27,r28 + rldicr r3,r0,3,63-3 /* r0 = (~hash & mask) << 3 */ + + /* Call ppc_md.hpte_insert */ + ld r7,STK_PARM(r4)(r1) /* Retreive new pp bits */ + mr r4,r29 /* Retreive va */ + li r6,HPTE_V_SECONDARY@l /* secondary slot */ +_GLOBAL(htab_call_hpte_insert2) + bl . /* Will be patched by htab_finish_init() */ + cmpdi 0,r3,0 + bge+ htab_pte_insert_ok /* Insertion successful */ + cmpdi 0,r3,-2 /* Critical failure */ + beq- htab_pte_insert_failure + + /* Both are full, we need to evict something */ + mftb r0 + /* Pick a random group based on TB */ + andi. r0,r0,1 + mr r5,r28 + bne 2f + not r5,r5 +2: and r0,r5,r27 + rldicr r3,r0,3,63-3 /* r0 = (hash & mask) << 3 */ + /* Call ppc_md.hpte_remove */ +_GLOBAL(htab_call_hpte_remove) + bl . /* Will be patched by htab_finish_init() */ + + /* Try all again */ + b htab_insert_pte + +bail_ok: + li r3,0 + b bail + +htab_pte_insert_ok: + /* Insert slot number & secondary bit in PTE */ + rldimi r30,r3,12,63-15 + + /* Write out the PTE with a normal write + * (maybe add eieio may be good still ?) + */ +htab_write_out_pte: + ld r6,STK_PARM(r6)(r1) + std r30,0(r6) + li r3, 0 +bail: + ld r27,STK_REG(r27)(r1) + ld r28,STK_REG(r28)(r1) + ld r29,STK_REG(r29)(r1) + ld r30,STK_REG(r30)(r1) + ld r31,STK_REG(r31)(r1) + addi r1,r1,STACKFRAMESIZE + ld r0,16(r1) + mtlr r0 + blr + +htab_modify_pte: + /* Keep PP bits in r4 and slot idx from the PTE around in r3 */ + mr r4,r3 + rlwinm r3,r31,32-12,29,31 + + /* Secondary group ? if yes, get a inverted hash value */ + mr r5,r28 + andi. r0,r31,_PAGE_SECONDARY + beq 1f + not r5,r5 +1: + /* Calculate proper slot value for ppc_md.hpte_updatepp */ + and r0,r5,r27 + rldicr r0,r0,3,63-3 /* r0 = (hash & mask) << 3 */ + add r3,r0,r3 /* add slot idx */ + + /* Call ppc_md.hpte_updatepp */ + mr r5,r29 /* va */ + li r6,0 /* large is 0 */ + ld r7,STK_PARM(r8)(r1) /* get "local" param */ +_GLOBAL(htab_call_hpte_updatepp) + bl . /* Will be patched by htab_finish_init() */ + + /* if we failed because typically the HPTE wasn't really here + * we try an insertion. + */ + cmpdi 0,r3,-1 + beq- htab_insert_pte + + /* Clear the BUSY bit and Write out the PTE */ + li r0,_PAGE_BUSY + andc r30,r30,r0 + b htab_write_out_pte + +htab_wrong_access: + /* Bail out clearing reservation */ + stdcx. r31,0,r6 + li r3,1 + b bail + +htab_pte_insert_failure: + /* Bail out restoring old PTE */ + ld r6,STK_PARM(r6)(r1) + std r31,0(r6) + li r3,-1 + b bail + + |