diff options
Diffstat (limited to 'arch/powerpc/mm/mem.c')
| -rw-r--r-- | arch/powerpc/mm/mem.c | 185 |
1 files changed, 184 insertions, 1 deletions
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index 345db08e5d2..0650de74d0b 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -45,8 +45,9 @@ #include <asm/tlb.h> #include <asm/bootinfo.h> #include <asm/prom.h> +#include <asm/lmb.h> +#include <asm/sections.h> -#include "mem_pieces.h" #include "mmu_decl.h" #ifndef CPU_FTR_COHERENT_ICACHE @@ -54,6 +55,9 @@ #define CPU_FTR_NOEXECUTE 0 #endif +int init_bootmem_done; +int mem_init_done; + /* * This is called by /dev/mem to know if a given address has to * be mapped non-cacheable or not @@ -131,6 +135,185 @@ void show_mem(void) } /* + * Initialize the bootmem system and give it all the memory we + * have available. If we are using highmem, we only put the + * lowmem into the bootmem system. + */ +#ifndef CONFIG_NEED_MULTIPLE_NODES +void __init do_init_bootmem(void) +{ + unsigned long i; + unsigned long start, bootmap_pages; + unsigned long total_pages; + int boot_mapsize; + + max_pfn = total_pages = lmb_end_of_DRAM() >> PAGE_SHIFT; +#ifdef CONFIG_HIGHMEM + total_pages = total_lowmem >> PAGE_SHIFT; +#endif + + /* + * Find an area to use for the bootmem bitmap. Calculate the size of + * bitmap required as (Total Memory) / PAGE_SIZE / BITS_PER_BYTE. + * Add 1 additional page in case the address isn't page-aligned. + */ + bootmap_pages = bootmem_bootmap_pages(total_pages); + + start = lmb_alloc(bootmap_pages << PAGE_SHIFT, PAGE_SIZE); + BUG_ON(!start); + + boot_mapsize = init_bootmem(start >> PAGE_SHIFT, total_pages); + + /* Add all physical memory to the bootmem map, mark each area + * present. + */ + for (i = 0; i < lmb.memory.cnt; i++) { + unsigned long base = lmb.memory.region[i].base; + unsigned long size = lmb_size_bytes(&lmb.memory, i); +#ifdef CONFIG_HIGHMEM + if (base >= total_lowmem) + continue; + if (base + size > total_lowmem) + size = total_lowmem - base; +#endif + free_bootmem(base, size); + } + + /* reserve the sections we're already using */ + for (i = 0; i < lmb.reserved.cnt; i++) + reserve_bootmem(lmb.reserved.region[i].base, + lmb_size_bytes(&lmb.reserved, i)); + + /* XXX need to clip this if using highmem? */ + for (i = 0; i < lmb.memory.cnt; i++) + memory_present(0, lmb_start_pfn(&lmb.memory, i), + lmb_end_pfn(&lmb.memory, i)); + init_bootmem_done = 1; +} + +/* + * paging_init() sets up the page tables - in fact we've already done this. + */ +void __init paging_init(void) +{ + unsigned long zones_size[MAX_NR_ZONES]; + unsigned long zholes_size[MAX_NR_ZONES]; + unsigned long total_ram = lmb_phys_mem_size(); + unsigned long top_of_ram = lmb_end_of_DRAM(); + +#ifdef CONFIG_HIGHMEM + map_page(PKMAP_BASE, 0, 0); /* XXX gross */ + pkmap_page_table = pte_offset_kernel(pmd_offset(pgd_offset_k + (PKMAP_BASE), PKMAP_BASE), PKMAP_BASE); + map_page(KMAP_FIX_BEGIN, 0, 0); /* XXX gross */ + kmap_pte = pte_offset_kernel(pmd_offset(pgd_offset_k + (KMAP_FIX_BEGIN), KMAP_FIX_BEGIN), KMAP_FIX_BEGIN); + kmap_prot = PAGE_KERNEL; +#endif /* CONFIG_HIGHMEM */ + + printk(KERN_INFO "Top of RAM: 0x%lx, Total RAM: 0x%lx\n", + top_of_ram, total_ram); + printk(KERN_INFO "Memory hole size: %ldMB\n", + (top_of_ram - total_ram) >> 20); + /* + * All pages are DMA-able so we put them all in the DMA zone. + */ + memset(zones_size, 0, sizeof(zones_size)); + memset(zholes_size, 0, sizeof(zholes_size)); + + zones_size[ZONE_DMA] = top_of_ram >> PAGE_SHIFT; + zholes_size[ZONE_DMA] = (top_of_ram - total_ram) >> PAGE_SHIFT; + +#ifdef CONFIG_HIGHMEM + zones_size[ZONE_DMA] = total_lowmem >> PAGE_SHIFT; + zones_size[ZONE_HIGHMEM] = (total_memory - total_lowmem) >> PAGE_SHIFT; + zholes_size[ZONE_HIGHMEM] = (top_of_ram - total_ram) >> PAGE_SHIFT; +#else + zones_size[ZONE_DMA] = top_of_ram >> PAGE_SHIFT; + zholes_size[ZONE_DMA] = (top_of_ram - total_ram) >> PAGE_SHIFT; +#endif /* CONFIG_HIGHMEM */ + + free_area_init_node(0, NODE_DATA(0), zones_size, + __pa(PAGE_OFFSET) >> PAGE_SHIFT, zholes_size); +} +#endif /* ! CONFIG_NEED_MULTIPLE_NODES */ + +void __init mem_init(void) +{ +#ifdef CONFIG_NEED_MULTIPLE_NODES + int nid; +#endif + pg_data_t *pgdat; + unsigned long i; + struct page *page; + unsigned long reservedpages = 0, codesize, initsize, datasize, bsssize; + + num_physpages = max_pfn; /* RAM is assumed contiguous */ + high_memory = (void *) __va(max_low_pfn * PAGE_SIZE); + +#ifdef CONFIG_NEED_MULTIPLE_NODES + for_each_online_node(nid) { + if (NODE_DATA(nid)->node_spanned_pages != 0) { + printk("freeing bootmem node %x\n", nid); + totalram_pages += + free_all_bootmem_node(NODE_DATA(nid)); + } + } +#else + max_mapnr = num_physpages; + totalram_pages += free_all_bootmem(); +#endif + for_each_pgdat(pgdat) { + for (i = 0; i < pgdat->node_spanned_pages; i++) { + page = pgdat_page_nr(pgdat, i); + if (PageReserved(page)) + reservedpages++; + } + } + + codesize = (unsigned long)&_sdata - (unsigned long)&_stext; + datasize = (unsigned long)&__init_begin - (unsigned long)&_sdata; + initsize = (unsigned long)&__init_end - (unsigned long)&__init_begin; + bsssize = (unsigned long)&__bss_stop - (unsigned long)&__bss_start; + +#ifdef CONFIG_HIGHMEM + { + unsigned long pfn, highmem_mapnr; + + highmem_mapnr = total_lowmem >> PAGE_SHIFT; + for (pfn = highmem_mapnr; pfn < max_mapnr; ++pfn) { + struct page *page = pfn_to_page(pfn); + + ClearPageReserved(page); + set_page_count(page, 1); + __free_page(page); + totalhigh_pages++; + } + totalram_pages += totalhigh_pages; + printk(KERN_INFO "High memory: %luk\n", + totalhigh_pages << (PAGE_SHIFT-10)); + } +#endif /* CONFIG_HIGHMEM */ + + printk(KERN_INFO "Memory: %luk/%luk available (%luk kernel code, " + "%luk reserved, %luk data, %luk bss, %luk init)\n", + (unsigned long)nr_free_pages() << (PAGE_SHIFT-10), + num_physpages << (PAGE_SHIFT-10), + codesize >> 10, + reservedpages << (PAGE_SHIFT-10), + datasize >> 10, + bsssize >> 10, + initsize >> 10); + + mem_init_done = 1; + +#ifdef CONFIG_PPC64 + /* Initialize the vDSO */ + vdso_init(); +#endif +} + +/* * This is called when a page has been modified by the kernel. * It just marks the page as not i-cache clean. We do the i-cache * flush later when the page is given to a user process, if necessary. |