diff options
Diffstat (limited to 'arch/powerpc/oprofile/op_model_cell.c')
| -rw-r--r-- | arch/powerpc/oprofile/op_model_cell.c | 607 |
1 files changed, 527 insertions, 80 deletions
diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c index c29293befba..d928b54f3a0 100644 --- a/arch/powerpc/oprofile/op_model_cell.c +++ b/arch/powerpc/oprofile/op_model_cell.c @@ -5,8 +5,8 @@ * * Author: David Erb (djerb@us.ibm.com) * Modifications: - * Carl Love <carll@us.ibm.com> - * Maynard Johnson <maynardj@us.ibm.com> + * Carl Love <carll@us.ibm.com> + * Maynard Johnson <maynardj@us.ibm.com> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -38,12 +38,25 @@ #include "../platforms/cell/interrupt.h" #include "../platforms/cell/cbe_regs.h" +#include "cell/pr_util.h" + +static void cell_global_stop_spu(void); + +/* + * spu_cycle_reset is the number of cycles between samples. + * This variable is used for SPU profiling and should ONLY be set + * at the beginning of cell_reg_setup; otherwise, it's read-only. + */ +static unsigned int spu_cycle_reset; + +#define NUM_SPUS_PER_NODE 8 +#define SPU_CYCLES_EVENT_NUM 2 /* event number for SPU_CYCLES */ #define PPU_CYCLES_EVENT_NUM 1 /* event number for CYCLES */ -#define PPU_CYCLES_GRP_NUM 1 /* special group number for identifying - * PPU_CYCLES event - */ -#define CBE_COUNT_ALL_CYCLES 0x42800000 /* PPU cycle event specifier */ +#define PPU_CYCLES_GRP_NUM 1 /* special group number for identifying + * PPU_CYCLES event + */ +#define CBE_COUNT_ALL_CYCLES 0x42800000 /* PPU cycle event specifier */ #define NUM_THREADS 2 /* number of physical threads in * physical processor @@ -51,6 +64,7 @@ #define NUM_TRACE_BUS_WORDS 4 #define NUM_INPUT_BUS_WORDS 2 +#define MAX_SPU_COUNT 0xFFFFFF /* maximum 24 bit LFSR value */ struct pmc_cntrl_data { unsigned long vcntr; @@ -62,11 +76,10 @@ struct pmc_cntrl_data { /* * ibm,cbe-perftools rtas parameters */ - struct pm_signal { u16 cpu; /* Processor to modify */ - u16 sub_unit; /* hw subunit this applies to (if applicable) */ - short int signal_group; /* Signal Group to Enable/Disable */ + u16 sub_unit; /* hw subunit this applies to (if applicable)*/ + short int signal_group; /* Signal Group to Enable/Disable */ u8 bus_word; /* Enable/Disable on this Trace/Trigger/Event * Bus Word(s) (bitmask) */ @@ -112,21 +125,42 @@ static DEFINE_PER_CPU(unsigned long[NR_PHYS_CTRS], pmc_values); static struct pmc_cntrl_data pmc_cntrl[NUM_THREADS][NR_PHYS_CTRS]; -/* Interpetation of hdw_thread: +/* + * The CELL profiling code makes rtas calls to setup the debug bus to + * route the performance signals. Additionally, SPU profiling requires + * a second rtas call to setup the hardware to capture the SPU PCs. + * The EIO error value is returned if the token lookups or the rtas + * call fail. The EIO error number is the best choice of the existing + * error numbers. The probability of rtas related error is very low. But + * by returning EIO and printing additional information to dmsg the user + * will know that OProfile did not start and dmesg will tell them why. + * OProfile does not support returning errors on Stop. Not a huge issue + * since failure to reset the debug bus or stop the SPU PC collection is + * not a fatel issue. Chances are if the Stop failed, Start doesn't work + * either. + */ + +/* + * Interpetation of hdw_thread: * 0 - even virtual cpus 0, 2, 4,... * 1 - odd virtual cpus 1, 3, 5, ... + * + * FIXME: this is strictly wrong, we need to clean this up in a number + * of places. It works for now. -arnd */ static u32 hdw_thread; static u32 virt_cntr_inter_mask; static struct timer_list timer_virt_cntr; -/* pm_signal needs to be global since it is initialized in +/* + * pm_signal needs to be global since it is initialized in * cell_reg_setup at the time when the necessary information * is available. */ static struct pm_signal pm_signal[NR_PHYS_CTRS]; -static int pm_rtas_token; +static int pm_rtas_token; /* token for debug bus setup call */ +static int spu_rtas_token; /* token for SPU cycle profiling */ static u32 reset_value[NR_PHYS_CTRS]; static int num_counters; @@ -147,8 +181,8 @@ rtas_ibm_cbe_perftools(int subfunc, int passthru, { u64 paddr = __pa(address); - return rtas_call(pm_rtas_token, 5, 1, NULL, subfunc, passthru, - paddr >> 32, paddr & 0xffffffff, length); + return rtas_call(pm_rtas_token, 5, 1, NULL, subfunc, + passthru, paddr >> 32, paddr & 0xffffffff, length); } static void pm_rtas_reset_signals(u32 node) @@ -156,12 +190,13 @@ static void pm_rtas_reset_signals(u32 node) int ret; struct pm_signal pm_signal_local; - /* The debug bus is being set to the passthru disable state. - * However, the FW still expects atleast one legal signal routing - * entry or it will return an error on the arguments. If we don't - * supply a valid entry, we must ignore all return values. Ignoring - * all return values means we might miss an error we should be - * concerned about. + /* + * The debug bus is being set to the passthru disable state. + * However, the FW still expects atleast one legal signal routing + * entry or it will return an error on the arguments. If we don't + * supply a valid entry, we must ignore all return values. Ignoring + * all return values means we might miss an error we should be + * concerned about. */ /* fw expects physical cpu #. */ @@ -175,18 +210,24 @@ static void pm_rtas_reset_signals(u32 node) &pm_signal_local, sizeof(struct pm_signal)); - if (ret) + if (unlikely(ret)) + /* + * Not a fatal error. For Oprofile stop, the oprofile + * functions do not support returning an error for + * failure to stop OProfile. + */ printk(KERN_WARNING "%s: rtas returned: %d\n", __FUNCTION__, ret); } -static void pm_rtas_activate_signals(u32 node, u32 count) +static int pm_rtas_activate_signals(u32 node, u32 count) { int ret; int i, j; struct pm_signal pm_signal_local[NR_PHYS_CTRS]; - /* There is no debug setup required for the cycles event. + /* + * There is no debug setup required for the cycles event. * Note that only events in the same group can be used. * Otherwise, there will be conflicts in correctly routing * the signals on the debug bus. It is the responsiblity @@ -213,10 +254,14 @@ static void pm_rtas_activate_signals(u32 node, u32 count) pm_signal_local, i * sizeof(struct pm_signal)); - if (ret) + if (unlikely(ret)) { printk(KERN_WARNING "%s: rtas returned: %d\n", __FUNCTION__, ret); + return -EIO; + } } + + return 0; } /* @@ -260,11 +305,12 @@ static void set_pm_event(u32 ctr, int event, u32 unit_mask) pm_regs.pm07_cntrl[ctr] |= PM07_CTR_POLARITY(polarity); pm_regs.pm07_cntrl[ctr] |= PM07_CTR_INPUT_CONTROL(input_control); - /* Some of the islands signal selection is based on 64 bit words. + /* + * Some of the islands signal selection is based on 64 bit words. * The debug bus words are 32 bits, the input words to the performance * counters are defined as 32 bits. Need to convert the 64 bit island * specification to the appropriate 32 input bit and bus word for the - * performance counter event selection. See the CELL Performance + * performance counter event selection. See the CELL Performance * monitoring signals manual and the Perf cntr hardware descriptions * for the details. */ @@ -298,6 +344,7 @@ static void set_pm_event(u32 ctr, int event, u32 unit_mask) input_bus[j] = i; pm_regs.group_control |= (i << (31 - i)); + break; } } @@ -309,7 +356,8 @@ out: static void write_pm_cntrl(int cpu) { - /* Oprofile will use 32 bit counters, set bits 7:10 to 0 + /* + * Oprofile will use 32 bit counters, set bits 7:10 to 0 * pmregs.pm_cntrl is a global */ @@ -326,7 +374,8 @@ static void write_pm_cntrl(int cpu) if (pm_regs.pm_cntrl.freeze == 1) val |= CBE_PM_FREEZE_ALL_CTRS; - /* Routine set_count_mode must be called previously to set + /* + * Routine set_count_mode must be called previously to set * the count mode based on the user selection of user and kernel. */ val |= CBE_PM_COUNT_MODE_SET(pm_regs.pm_cntrl.count_mode); @@ -336,7 +385,8 @@ static void write_pm_cntrl(int cpu) static inline void set_count_mode(u32 kernel, u32 user) { - /* The user must specify user and kernel if they want them. If + /* + * The user must specify user and kernel if they want them. If * neither is specified, OProfile will count in hypervisor mode. * pm_regs.pm_cntrl is a global */ @@ -364,7 +414,7 @@ static inline void enable_ctr(u32 cpu, u32 ctr, u32 * pm07_cntrl) /* * Oprofile is expected to collect data on all CPUs simultaneously. - * However, there is one set of performance counters per node. There are + * However, there is one set of performance counters per node. There are * two hardware threads or virtual CPUs on each node. Hence, OProfile must * multiplex in time the performance counter collection on the two virtual * CPUs. The multiplexing of the performance counters is done by this @@ -377,19 +427,19 @@ static inline void enable_ctr(u32 cpu, u32 ctr, u32 * pm07_cntrl) * pair of per-cpu arrays is used for storing the previous and next * pmc values for a given node. * NOTE: We use the per-cpu variable to improve cache performance. + * + * This routine will alternate loading the virtual counters for + * virtual CPUs */ static void cell_virtual_cntr(unsigned long data) { - /* This routine will alternate loading the virtual counters for - * virtual CPUs - */ int i, prev_hdw_thread, next_hdw_thread; u32 cpu; unsigned long flags; - /* Make sure that the interrupt_hander and - * the virt counter are not both playing with - * the counters on the same node. + /* + * Make sure that the interrupt_hander and the virt counter are + * not both playing with the counters on the same node. */ spin_lock_irqsave(&virt_cntr_lock, flags); @@ -400,22 +450,25 @@ static void cell_virtual_cntr(unsigned long data) hdw_thread = 1 ^ hdw_thread; next_hdw_thread = hdw_thread; - for (i = 0; i < num_counters; i++) - /* There are some per thread events. Must do the + /* + * There are some per thread events. Must do the * set event, for the thread that is being started */ + for (i = 0; i < num_counters; i++) set_pm_event(i, pmc_cntrl[next_hdw_thread][i].evnts, pmc_cntrl[next_hdw_thread][i].masks); - /* The following is done only once per each node, but + /* + * The following is done only once per each node, but * we need cpu #, not node #, to pass to the cbe_xxx functions. */ for_each_online_cpu(cpu) { if (cbe_get_hw_thread_id(cpu)) continue; - /* stop counters, save counter values, restore counts + /* + * stop counters, save counter values, restore counts * for previous thread */ cbe_disable_pm(cpu); @@ -428,7 +481,7 @@ static void cell_virtual_cntr(unsigned long data) == 0xFFFFFFFF) /* If the cntr value is 0xffffffff, we must * reset that to 0xfffffff0 when the current - * thread is restarted. This will generate a + * thread is restarted. This will generate a * new interrupt and make sure that we never * restore the counters to the max value. If * the counters were restored to the max value, @@ -444,13 +497,15 @@ static void cell_virtual_cntr(unsigned long data) next_hdw_thread)[i]); } - /* Switch to the other thread. Change the interrupt + /* + * Switch to the other thread. Change the interrupt * and control regs to be scheduled on the CPU * corresponding to the thread to execute. */ for (i = 0; i < num_counters; i++) { if (pmc_cntrl[next_hdw_thread][i].enabled) { - /* There are some per thread events. + /* + * There are some per thread events. * Must do the set event, enable_cntr * for each cpu. */ @@ -482,17 +537,42 @@ static void start_virt_cntrs(void) } /* This function is called once for all cpus combined */ -static void -cell_reg_setup(struct op_counter_config *ctr, - struct op_system_config *sys, int num_ctrs) +static int cell_reg_setup(struct op_counter_config *ctr, + struct op_system_config *sys, int num_ctrs) { int i, j, cpu; + spu_cycle_reset = 0; + + if (ctr[0].event == SPU_CYCLES_EVENT_NUM) { + spu_cycle_reset = ctr[0].count; + + /* + * Each node will need to make the rtas call to start + * and stop SPU profiling. Get the token once and store it. + */ + spu_rtas_token = rtas_token("ibm,cbe-spu-perftools"); + + if (unlikely(spu_rtas_token == RTAS_UNKNOWN_SERVICE)) { + printk(KERN_ERR + "%s: rtas token ibm,cbe-spu-perftools unknown\n", + __FUNCTION__); + return -EIO; + } + } pm_rtas_token = rtas_token("ibm,cbe-perftools"); - if (pm_rtas_token == RTAS_UNKNOWN_SERVICE) { - printk(KERN_WARNING "%s: RTAS_UNKNOWN_SERVICE\n", + + /* + * For all events excetp PPU CYCLEs, each node will need to make + * the rtas cbe-perftools call to setup and reset the debug bus. + * Make the token lookup call once and store it in the global + * variable pm_rtas_token. + */ + if (unlikely(pm_rtas_token == RTAS_UNKNOWN_SERVICE)) { + printk(KERN_ERR + "%s: rtas token ibm,cbe-perftools unknown\n", __FUNCTION__); - goto out; + return -EIO; } num_counters = num_ctrs; @@ -520,7 +600,8 @@ cell_reg_setup(struct op_counter_config *ctr, per_cpu(pmc_values, j)[i] = 0; } - /* Setup the thread 1 events, map the thread 0 event to the + /* + * Setup the thread 1 events, map the thread 0 event to the * equivalent thread 1 event. */ for (i = 0; i < num_ctrs; ++i) { @@ -544,9 +625,10 @@ cell_reg_setup(struct op_counter_config *ctr, for (i = 0; i < NUM_INPUT_BUS_WORDS; i++) input_bus[i] = 0xff; - /* Our counters count up, and "count" refers to + /* + * Our counters count up, and "count" refers to * how much before the next interrupt, and we interrupt - * on overflow. So we calculate the starting value + * on overflow. So we calculate the starting value * which will give us "count" until overflow. * Then we set the events on the enabled counters. */ @@ -569,28 +651,27 @@ cell_reg_setup(struct op_counter_config *ctr, for (i = 0; i < num_counters; ++i) { per_cpu(pmc_values, cpu)[i] = reset_value[i]; } -out: - ; + + return 0; } + + /* This function is called once for each cpu */ -static void cell_cpu_setup(struct op_counter_config *cntr) +static int cell_cpu_setup(struct op_counter_config *cntr) { u32 cpu = smp_processor_id(); u32 num_enabled = 0; int i; + if (spu_cycle_reset) + return 0; + /* There is one performance monitor per processor chip (i.e. node), * so we only need to perform this function once per node. */ if (cbe_get_hw_thread_id(cpu)) - goto out; - - if (pm_rtas_token == RTAS_UNKNOWN_SERVICE) { - printk(KERN_WARNING "%s: RTAS_UNKNOWN_SERVICE\n", - __FUNCTION__); - goto out; - } + return 0; /* Stop all counters */ cbe_disable_pm(cpu); @@ -609,16 +690,286 @@ static void cell_cpu_setup(struct op_counter_config *cntr) } } - pm_rtas_activate_signals(cbe_cpu_to_node(cpu), num_enabled); + /* + * The pm_rtas_activate_signals will return -EIO if the FW + * call failed. + */ + return pm_rtas_activate_signals(cbe_cpu_to_node(cpu), num_enabled); +} + +#define ENTRIES 303 +#define MAXLFSR 0xFFFFFF + +/* precomputed table of 24 bit LFSR values */ +static int initial_lfsr[] = { + 8221349, 12579195, 5379618, 10097839, 7512963, 7519310, 3955098, 10753424, + 15507573, 7458917, 285419, 2641121, 9780088, 3915503, 6668768, 1548716, + 4885000, 8774424, 9650099, 2044357, 2304411, 9326253, 10332526, 4421547, + 3440748, 10179459, 13332843, 10375561, 1313462, 8375100, 5198480, 6071392, + 9341783, 1526887, 3985002, 1439429, 13923762, 7010104, 11969769, 4547026, + 2040072, 4025602, 3437678, 7939992, 11444177, 4496094, 9803157, 10745556, + 3671780, 4257846, 5662259, 13196905, 3237343, 12077182, 16222879, 7587769, + 14706824, 2184640, 12591135, 10420257, 7406075, 3648978, 11042541, 15906893, + 11914928, 4732944, 10695697, 12928164, 11980531, 4430912, 11939291, 2917017, + 6119256, 4172004, 9373765, 8410071, 14788383, 5047459, 5474428, 1737756, + 15967514, 13351758, 6691285, 8034329, 2856544, 14394753, 11310160, 12149558, + 7487528, 7542781, 15668898, 12525138, 12790975, 3707933, 9106617, 1965401, + 16219109, 12801644, 2443203, 4909502, 8762329, 3120803, 6360315, 9309720, + 15164599, 10844842, 4456529, 6667610, 14924259, 884312, 6234963, 3326042, + 15973422, 13919464, 5272099, 6414643, 3909029, 2764324, 5237926, 4774955, + 10445906, 4955302, 5203726, 10798229, 11443419, 2303395, 333836, 9646934, + 3464726, 4159182, 568492, 995747, 10318756, 13299332, 4836017, 8237783, + 3878992, 2581665, 11394667, 5672745, 14412947, 3159169, 9094251, 16467278, + 8671392, 15230076, 4843545, 7009238, 15504095, 1494895, 9627886, 14485051, + 8304291, 252817, 12421642, 16085736, 4774072, 2456177, 4160695, 15409741, + 4902868, 5793091, 13162925, 16039714, 782255, 11347835, 14884586, 366972, + 16308990, 11913488, 13390465, 2958444, 10340278, 1177858, 1319431, 10426302, + 2868597, 126119, 5784857, 5245324, 10903900, 16436004, 3389013, 1742384, + 14674502, 10279218, 8536112, 10364279, 6877778, 14051163, 1025130, 6072469, + 1988305, 8354440, 8216060, 16342977, 13112639, 3976679, 5913576, 8816697, + 6879995, 14043764, 3339515, 9364420, 15808858, 12261651, 2141560, 5636398, + 10345425, 10414756, 781725, 6155650, 4746914, 5078683, 7469001, 6799140, + 10156444, 9667150, 10116470, 4133858, 2121972, 1124204, 1003577, 1611214, + 14304602, 16221850, 13878465, 13577744, 3629235, 8772583, 10881308, 2410386, + 7300044, 5378855, 9301235, 12755149, 4977682, 8083074, 10327581, 6395087, + 9155434, 15501696, 7514362, 14520507, 15808945, 3244584, 4741962, 9658130, + 14336147, 8654727, 7969093, 15759799, 14029445, 5038459, 9894848, 8659300, + 13699287, 8834306, 10712885, 14753895, 10410465, 3373251, 309501, 9561475, + 5526688, 14647426, 14209836, 5339224, 207299, 14069911, 8722990, 2290950, + 3258216, 12505185, 6007317, 9218111, 14661019, 10537428, 11731949, 9027003, + 6641507, 9490160, 200241, 9720425, 16277895, 10816638, 1554761, 10431375, + 7467528, 6790302, 3429078, 14633753, 14428997, 11463204, 3576212, 2003426, + 6123687, 820520, 9992513, 15784513, 5778891, 6428165, 8388607 +}; + +/* + * The hardware uses an LFSR counting sequence to determine when to capture + * the SPU PCs. An LFSR sequence is like a puesdo random number sequence + * where each number occurs once in the sequence but the sequence is not in + * numerical order. The SPU PC capture is done when the LFSR sequence reaches + * the last value in the sequence. Hence the user specified value N + * corresponds to the LFSR number that is N from the end of the sequence. + * + * To avoid the time to compute the LFSR, a lookup table is used. The 24 bit + * LFSR sequence is broken into four ranges. The spacing of the precomputed + * values is adjusted in each range so the error between the user specifed + * number (N) of events between samples and the actual number of events based + * on the precomputed value will be les then about 6.2%. Note, if the user + * specifies N < 2^16, the LFSR value that is 2^16 from the end will be used. + * This is to prevent the loss of samples because the trace buffer is full. + * + * User specified N Step between Index in + * precomputed values precomputed + * table + * 0 to 2^16-1 ---- 0 + * 2^16 to 2^16+2^19-1 2^12 1 to 128 + * 2^16+2^19 to 2^16+2^19+2^22-1 2^15 129 to 256 + * 2^16+2^19+2^22 to 2^24-1 2^18 257 to 302 + * + * + * For example, the LFSR values in the second range are computed for 2^16, + * 2^16+2^12, ... , 2^19-2^16, 2^19 and stored in the table at indicies + * 1, 2,..., 127, 128. + * + * The 24 bit LFSR value for the nth number in the sequence can be + * calculated using the following code: + * + * #define size 24 + * int calculate_lfsr(int n) + * { + * int i; + * unsigned int newlfsr0; + * unsigned int lfsr = 0xFFFFFF; + * unsigned int howmany = n; + * + * for (i = 2; i < howmany + 2; i++) { + * newlfsr0 = (((lfsr >> (size - 1 - 0)) & 1) ^ + * ((lfsr >> (size - 1 - 1)) & 1) ^ + * (((lfsr >> (size - 1 - 6)) & 1) ^ + * ((lfsr >> (size - 1 - 23)) & 1))); + * + * lfsr >>= 1; + * lfsr = lfsr | (newlfsr0 << (size - 1)); + * } + * return lfsr; + * } + */ + +#define V2_16 (0x1 << 16) +#define V2_19 (0x1 << 19) +#define V2_22 (0x1 << 22) + +static int calculate_lfsr(int n) +{ + /* + * The ranges and steps are in powers of 2 so the calculations + * can be done using shifts rather then divide. + */ + int index; + + if ((n >> 16) == 0) + index = 0; + else if (((n - V2_16) >> 19) == 0) + index = ((n - V2_16) >> 12) + 1; + else if (((n - V2_16 - V2_19) >> 22) == 0) + index = ((n - V2_16 - V2_19) >> 15 ) + 1 + 128; + else if (((n - V2_16 - V2_19 - V2_22) >> 24) == 0) + index = ((n - V2_16 - V2_19 - V2_22) >> 18 ) + 1 + 256; + else + index = ENTRIES-1; + + /* make sure index is valid */ + if ((index > ENTRIES) || (index < 0)) + index = ENTRIES-1; + + return initial_lfsr[index]; +} + +static int pm_rtas_activate_spu_profiling(u32 node) +{ + int ret, i; + struct pm_signal pm_signal_local[NR_PHYS_CTRS]; + + /* + * Set up the rtas call to configure the debug bus to + * route the SPU PCs. Setup the pm_signal for each SPU + */ + for (i = 0; i < NUM_SPUS_PER_NODE; i++) { + pm_signal_local[i].cpu = node; + pm_signal_local[i].signal_group = 41; + /* spu i on word (i/2) */ + pm_signal_local[i].bus_word = 1 << i / 2; + /* spu i */ + pm_signal_local[i].sub_unit = i; + pm_signal_local[i].bit = 63; + } + + ret = rtas_ibm_cbe_perftools(SUBFUNC_ACTIVATE, + PASSTHRU_ENABLE, pm_signal_local, + (NUM_SPUS_PER_NODE + * sizeof(struct pm_signal))); + + if (unlikely(ret)) { + printk(KERN_WARNING "%s: rtas returned: %d\n", + __FUNCTION__, ret); + return -EIO; + } + + return 0; +} + +#ifdef CONFIG_CPU_FREQ +static int +oprof_cpufreq_notify(struct notifier_block *nb, unsigned long val, void *data) +{ + int ret = 0; + struct cpufreq_freqs *frq = data; + if ((val == CPUFREQ_PRECHANGE && frq->old < frq->new) || + (val == CPUFREQ_POSTCHANGE && frq->old > frq->new) || + (val == CPUFREQ_RESUMECHANGE || val == CPUFREQ_SUSPENDCHANGE)) + set_spu_profiling_frequency(frq->new, spu_cycle_reset); + return ret; +} + +static struct notifier_block cpu_freq_notifier_block = { + .notifier_call = oprof_cpufreq_notify +}; +#endif + +static int cell_global_start_spu(struct op_counter_config *ctr) +{ + int subfunc; + unsigned int lfsr_value; + int cpu; + int ret; + int rtas_error; + unsigned int cpu_khzfreq = 0; + + /* The SPU profiling uses time-based profiling based on + * cpu frequency, so if configured with the CPU_FREQ + * option, we should detect frequency changes and react + * accordingly. + */ +#ifdef CONFIG_CPU_FREQ + ret = cpufreq_register_notifier(&cpu_freq_notifier_block, + CPUFREQ_TRANSITION_NOTIFIER); + if (ret < 0) + /* this is not a fatal error */ + printk(KERN_ERR "CPU freq change registration failed: %d\n", + ret); + + else + cpu_khzfreq = cpufreq_quick_get(smp_processor_id()); +#endif + + set_spu_profiling_frequency(cpu_khzfreq, spu_cycle_reset); + + for_each_online_cpu(cpu) { + if (cbe_get_hw_thread_id(cpu)) + continue; + + /* + * Setup SPU cycle-based profiling. + * Set perf_mon_control bit 0 to a zero before + * enabling spu collection hardware. + */ + cbe_write_pm(cpu, pm_control, 0); + + if (spu_cycle_reset > MAX_SPU_COUNT) + /* use largest possible value */ + lfsr_value = calculate_lfsr(MAX_SPU_COUNT-1); + else + lfsr_value = calculate_lfsr(spu_cycle_reset); + + /* must use a non zero value. Zero disables data collection. */ + if (lfsr_value == 0) + lfsr_value = calculate_lfsr(1); + + lfsr_value = lfsr_value << 8; /* shift lfsr to correct + * register location + */ + + /* debug bus setup */ + ret = pm_rtas_activate_spu_profiling(cbe_cpu_to_node(cpu)); + + if (unlikely(ret)) { + rtas_error = ret; + goto out; + } + + + subfunc = 2; /* 2 - activate SPU tracing, 3 - deactivate */ + + /* start profiling */ + ret = rtas_call(spu_rtas_token, 3, 1, NULL, subfunc, + cbe_cpu_to_node(cpu), lfsr_value); + + if (unlikely(ret != 0)) { + printk(KERN_ERR + "%s: rtas call ibm,cbe-spu-perftools failed, return = %d\n", + __FUNCTION__, ret); + rtas_error = -EIO; + goto out; + } + } + + rtas_error = start_spu_profiling(spu_cycle_reset); + if (rtas_error) + goto out_stop; + + oprofile_running = 1; + return 0; + +out_stop: + cell_global_stop_spu(); /* clean up the PMU/debug bus */ out: - ; + return rtas_error; } -static void cell_global_start(struct op_counter_config *ctr) +static int cell_global_start_ppu(struct op_counter_config *ctr) { - u32 cpu; + u32 cpu, i; u32 interrupt_mask = 0; - u32 i; /* This routine gets called once for the system. * There is one performance monitor per node, so we @@ -651,19 +1002,79 @@ static void cell_global_start(struct op_counter_config *ctr) oprofile_running = 1; smp_wmb(); - /* NOTE: start_virt_cntrs will result in cell_virtual_cntr() being - * executed which manipulates the PMU. We start the "virtual counter" + /* + * NOTE: start_virt_cntrs will result in cell_virtual_cntr() being + * executed which manipulates the PMU. We start the "virtual counter" * here so that we do not need to synchronize access to the PMU in * the above for-loop. */ start_virt_cntrs(); + + return 0; } -static void cell_global_stop(void) +static int cell_global_start(struct op_counter_config *ctr) +{ + if (spu_cycle_reset) + return cell_global_start_spu(ctr); + else + return cell_global_start_ppu(ctr); +} + +/* + * Note the generic OProfile stop calls do not support returning + * an error on stop. Hence, will not return an error if the FW + * calls fail on stop. Failure to reset the debug bus is not an issue. + * Failure to disable the SPU profiling is not an issue. The FW calls + * to enable the performance counters and debug bus will work even if + * the hardware was not cleanly reset. + */ +static void cell_global_stop_spu(void) +{ + int subfunc, rtn_value; + unsigned int lfsr_value; + int cpu; + + oprofile_running = 0; + +#ifdef CONFIG_CPU_FREQ + cpufreq_unregister_notifier(&cpu_freq_notifier_block, + CPUFREQ_TRANSITION_NOTIFIER); +#endif + + for_each_online_cpu(cpu) { + if (cbe_get_hw_thread_id(cpu)) + continue; + + subfunc = 3; /* + * 2 - activate SPU tracing, + * 3 - deactivate + */ + lfsr_value = 0x8f100000; + + rtn_value = rtas_call(spu_rtas_token, 3, 1, NULL, + subfunc, cbe_cpu_to_node(cpu), + lfsr_value); + + if (unlikely(rtn_value != 0)) { + printk(KERN_ERR + "%s: rtas call ibm,cbe-spu-perftools failed, return = %d\n", + __FUNCTION__, rtn_value); + } + + /* Deactivate the signals */ + pm_rtas_reset_signals(cbe_cpu_to_node(cpu)); + } + + stop_spu_profiling(); +} + +static void cell_global_stop_ppu(void) { int cpu; - /* This routine will be called once for the system. + /* + * This routine will be called once for the system. * There is one performance monitor per node, so we * only need to perform this function once per node. */ @@ -687,8 +1098,16 @@ static void cell_global_stop(void) } } -static void -cell_handle_interrupt(struct pt_regs *regs, struct op_counter_config *ctr) +static void cell_global_stop(void) +{ + if (spu_cycle_reset) + cell_global_stop_spu(); + else + cell_global_stop_ppu(); +} + +static void cell_handle_interrupt(struct pt_regs *regs, + struct op_counter_config *ctr) { u32 cpu; u64 pc; @@ -699,13 +1118,15 @@ cell_handle_interrupt(struct pt_regs *regs, struct op_counter_config *ctr) cpu = smp_processor_id(); - /* Need to make sure the interrupt handler and the virt counter + /* + * Need to make sure the interrupt handler and the virt counter * routine are not running at the same time. See the * cell_virtual_cntr() routine for additional comments. */ spin_lock_irqsave(&virt_cntr_lock, flags); - /* Need to disable and reenable the performance counters + /* + * Need to disable and reenable the performance counters * to get the desired behavior from the hardware. This * is hardware specific. */ @@ -714,7 +1135,8 @@ cell_handle_interrupt(struct pt_regs *regs, struct op_counter_config *ctr) interrupt_mask = cbe_get_and_clear_pm_interrupts(cpu); - /* If the interrupt mask has been cleared, then the virt cntr + /* + * If the interrupt mask has been cleared, then the virt cntr * has cleared the interrupt. When the thread that generated * the interrupt is restored, the data count will be restored to * 0xffffff0 to cause the interrupt to be regenerated. @@ -732,18 +1154,20 @@ cell_handle_interrupt(struct pt_regs *regs, struct op_counter_config *ctr) } } - /* The counters were frozen by the interrupt. + /* + * The counters were frozen by the interrupt. * Reenable the interrupt and restart the counters. * If there was a race between the interrupt handler and - * the virtual counter routine. The virutal counter + * the virtual counter routine. The virutal counter * routine may have cleared the interrupts. Hence must * use the virt_cntr_inter_mask to re-enable the interrupts. */ cbe_enable_pm_interrupts(cpu, hdw_thread, virt_cntr_inter_mask); - /* The writes to the various performance counters only writes - * to a latch. The new values (interrupt setting bits, reset + /* + * The writes to the various performance counters only writes + * to a latch. The new values (interrupt setting bits, reset * counter value etc.) are not copied to the actual registers * until the performance monitor is enabled. In order to get * this to work as desired, the permormance monitor needs to @@ -755,10 +1179,33 @@ cell_handle_interrupt(struct pt_regs *regs, struct op_counter_config *ctr) spin_unlock_irqrestore(&virt_cntr_lock, flags); } +/* + * This function is called from the generic OProfile + * driver. When profiling PPUs, we need to do the + * generic sync start; otherwise, do spu_sync_start. + */ +static int cell_sync_start(void) +{ + if (spu_cycle_reset) + return spu_sync_start(); + else + return DO_GENERIC_SYNC; +} + +static int cell_sync_stop(void) +{ + if (spu_cycle_reset) + return spu_sync_stop(); + else + return 1; +} + struct op_powerpc_model op_model_cell = { .reg_setup = cell_reg_setup, .cpu_setup = cell_cpu_setup, .global_start = cell_global_start, .global_stop = cell_global_stop, + .sync_start = cell_sync_start, + .sync_stop = cell_sync_stop, .handle_interrupt = cell_handle_interrupt, }; |