diff options
Diffstat (limited to 'arch/powerpc/oprofile/op_model_power4.c')
| -rw-r--r-- | arch/powerpc/oprofile/op_model_power4.c | 116 |
1 files changed, 107 insertions, 9 deletions
diff --git a/arch/powerpc/oprofile/op_model_power4.c b/arch/powerpc/oprofile/op_model_power4.c index 95ae77dec3f..315f9495e9b 100644 --- a/arch/powerpc/oprofile/op_model_power4.c +++ b/arch/powerpc/oprofile/op_model_power4.c @@ -21,6 +21,13 @@ #include <asm/reg.h> #define dbg(args...) +#define OPROFILE_PM_PMCSEL_MSK 0xffULL +#define OPROFILE_PM_UNIT_SHIFT 60 +#define OPROFILE_PM_UNIT_MSK 0xfULL +#define OPROFILE_MAX_PMC_NUM 3 +#define OPROFILE_PMSEL_FIELD_WIDTH 8 +#define OPROFILE_UNIT_FIELD_WIDTH 4 +#define MMCRA_SIAR_VALID_MASK 0x10000000ULL static unsigned long reset_value[OP_MAX_COUNTER]; @@ -31,6 +38,61 @@ static int use_slot_nums; static u32 mmcr0_val; static u64 mmcr1_val; static u64 mmcra_val; +static u32 cntr_marked_events; + +static int power7_marked_instr_event(u64 mmcr1) +{ + u64 psel, unit; + int pmc, cntr_marked_events = 0; + + /* Given the MMCR1 value, look at the field for each counter to + * determine if it is a marked event. Code based on the function + * power7_marked_instr_event() in file arch/powerpc/perf/power7-pmu.c. + */ + for (pmc = 0; pmc < 4; pmc++) { + psel = mmcr1 & (OPROFILE_PM_PMCSEL_MSK + << (OPROFILE_MAX_PMC_NUM - pmc) + * OPROFILE_MAX_PMC_NUM); + psel = (psel >> ((OPROFILE_MAX_PMC_NUM - pmc) + * OPROFILE_PMSEL_FIELD_WIDTH)) & ~1ULL; + unit = mmcr1 & (OPROFILE_PM_UNIT_MSK + << (OPROFILE_PM_UNIT_SHIFT + - (pmc * OPROFILE_PMSEL_FIELD_WIDTH ))); + unit = unit >> (OPROFILE_PM_UNIT_SHIFT + - (pmc * OPROFILE_PMSEL_FIELD_WIDTH)); + + switch (psel >> 4) { + case 2: + cntr_marked_events |= (pmc == 1 || pmc == 3) << pmc; + break; + case 3: + if (psel == 0x3c) { + cntr_marked_events |= (pmc == 0) << pmc; + break; + } + + if (psel == 0x3e) { + cntr_marked_events |= (pmc != 1) << pmc; + break; + } + + cntr_marked_events |= 1 << pmc; + break; + case 4: + case 5: + cntr_marked_events |= (unit == 0xd) << pmc; + break; + case 6: + if (psel == 0x64) + cntr_marked_events |= (pmc >= 2) << pmc; + break; + case 8: + cntr_marked_events |= (unit == 0xd) << pmc; + break; + } + } + return cntr_marked_events; +} static int power4_reg_setup(struct op_counter_config *ctr, struct op_system_config *sys, @@ -47,6 +109,23 @@ static int power4_reg_setup(struct op_counter_config *ctr, mmcr1_val = sys->mmcr1; mmcra_val = sys->mmcra; + /* Power 7+ and newer architectures: + * Determine which counter events in the group (the group of events is + * specified by the bit settings in the MMCR1 register) are marked + * events for use in the interrupt handler. Do the calculation once + * before OProfile starts. Information is used in the interrupt + * handler. Starting with Power 7+ we only record the sample for + * marked events if the SIAR valid bit is set. For non marked events + * the sample is always recorded. + */ + if (pvr_version_is(PVR_POWER7p)) + cntr_marked_events = power7_marked_instr_event(mmcr1_val); + else + cntr_marked_events = 0; /* For older processors, set the bit map + * to zero so the sample will always be + * be recorded. + */ + for (i = 0; i < cur_cpu_spec->num_pmcs; ++i) reset_value[i] = 0x80000000UL - ctr[i].count; @@ -61,10 +140,10 @@ static int power4_reg_setup(struct op_counter_config *ctr, else mmcr0_val |= MMCR0_PROBLEM_DISABLE; - if (__is_processor(PV_POWER4) || __is_processor(PV_POWER4p) || - __is_processor(PV_970) || __is_processor(PV_970FX) || - __is_processor(PV_970MP) || __is_processor(PV_970GX) || - __is_processor(PV_POWER5) || __is_processor(PV_POWER5p)) + if (pvr_version_is(PVR_POWER4) || pvr_version_is(PVR_POWER4p) || + pvr_version_is(PVR_970) || pvr_version_is(PVR_970FX) || + pvr_version_is(PVR_970MP) || pvr_version_is(PVR_970GX) || + pvr_version_is(PVR_POWER5) || pvr_version_is(PVR_POWER5p)) use_slot_nums = 1; return 0; @@ -84,9 +163,9 @@ extern void ppc_enable_pmcs(void); */ static inline int mmcra_must_set_sample(void) { - if (__is_processor(PV_POWER4) || __is_processor(PV_POWER4p) || - __is_processor(PV_970) || __is_processor(PV_970FX) || - __is_processor(PV_970MP) || __is_processor(PV_970GX)) + if (pvr_version_is(PVR_POWER4) || pvr_version_is(PVR_POWER4p) || + pvr_version_is(PVR_970) || pvr_version_is(PVR_970FX) || + pvr_version_is(PVR_970MP) || pvr_version_is(PVR_970GX)) return 1; return 0; @@ -276,7 +355,7 @@ static bool pmc_overflow(unsigned long val) * PMCs because a user might set a period of less than 256 and we * don't want to mistakenly reset them. */ - if (__is_processor(PV_POWER7) && ((0x80000000 - val) <= 256)) + if (pvr_version_is(PVR_POWER7) && ((0x80000000 - val) <= 256)) return true; return false; @@ -291,6 +370,7 @@ static void power4_handle_interrupt(struct pt_regs *regs, int i; unsigned int mmcr0; unsigned long mmcra; + bool siar_valid = false; mmcra = mfspr(SPRN_MMCRA); @@ -300,11 +380,29 @@ static void power4_handle_interrupt(struct pt_regs *regs, /* set the PMM bit (see comment below) */ mtmsrd(mfmsr() | MSR_PMM); + /* Check that the SIAR valid bit in MMCRA is set to 1. */ + if ((mmcra & MMCRA_SIAR_VALID_MASK) == MMCRA_SIAR_VALID_MASK) + siar_valid = true; + for (i = 0; i < cur_cpu_spec->num_pmcs; ++i) { val = classic_ctr_read(i); if (pmc_overflow(val)) { if (oprofile_running && ctr[i].enabled) { - oprofile_add_ext_sample(pc, regs, i, is_kernel); + /* Power 7+ and newer architectures: + * If the event is a marked event, then only + * save the sample if the SIAR valid bit is + * set. If the event is not marked, then + * always save the sample. + * Note, the Sample enable bit in the MMCRA + * register must be set to 1 if the group + * contains a marked event. + */ + if ((siar_valid && + (cntr_marked_events & (1 << i))) + || !(cntr_marked_events & (1 << i))) + oprofile_add_ext_sample(pc, regs, i, + is_kernel); + classic_ctr_write(i, reset_value[i]); } else { classic_ctr_write(i, 0); |