1 files changed, 99 insertions, 1 deletions

diff --git a/arch/powerpc/oprofile/op_model_power4.c b/arch/powerpc/oprofile/op_model_power4.c
index caffffa5b8f..315f9495e9b 100644
--- a/arch/powerpc/oprofile/op_model_power4.c
+++ b/arch/powerpc/oprofile/op_model_power4.c
@@ -21,6 +21,13 @@
 #include <asm/reg.h>
 
 #define dbg(args...)
+#define OPROFILE_PM_PMCSEL_MSK      0xffULL
+#define OPROFILE_PM_UNIT_SHIFT      60
+#define OPROFILE_PM_UNIT_MSK        0xfULL
+#define OPROFILE_MAX_PMC_NUM        3
+#define OPROFILE_PMSEL_FIELD_WIDTH  8
+#define OPROFILE_UNIT_FIELD_WIDTH   4
+#define MMCRA_SIAR_VALID_MASK       0x10000000ULL
 
 static unsigned long reset_value[OP_MAX_COUNTER];
 
@@ -31,6 +38,61 @@ static int use_slot_nums;
 static u32 mmcr0_val;
 static u64 mmcr1_val;
 static u64 mmcra_val;
+static u32 cntr_marked_events;
+
+static int power7_marked_instr_event(u64 mmcr1)
+{
+	u64 psel, unit;
+	int pmc, cntr_marked_events = 0;
+
+	/* Given the MMCR1 value, look at the field for each counter to
+	 * determine if it is a marked event.  Code based on the function
+	 * power7_marked_instr_event() in file arch/powerpc/perf/power7-pmu.c.
+	 */
+	for (pmc = 0; pmc < 4; pmc++) {
+		psel = mmcr1 & (OPROFILE_PM_PMCSEL_MSK
+				<< (OPROFILE_MAX_PMC_NUM - pmc)
+				* OPROFILE_MAX_PMC_NUM);
+		psel = (psel >> ((OPROFILE_MAX_PMC_NUM - pmc)
+				 * OPROFILE_PMSEL_FIELD_WIDTH)) & ~1ULL;
+		unit = mmcr1 & (OPROFILE_PM_UNIT_MSK
+				<< (OPROFILE_PM_UNIT_SHIFT
+				    - (pmc * OPROFILE_PMSEL_FIELD_WIDTH )));
+		unit = unit >> (OPROFILE_PM_UNIT_SHIFT
+				- (pmc * OPROFILE_PMSEL_FIELD_WIDTH));
+
+		switch (psel >> 4) {
+		case 2:
+			cntr_marked_events |= (pmc == 1 || pmc == 3) << pmc;
+			break;
+		case 3:
+			if (psel == 0x3c) {
+				cntr_marked_events |= (pmc == 0) << pmc;
+				break;
+			}
+
+			if (psel == 0x3e) {
+				cntr_marked_events |= (pmc != 1) << pmc;
+				break;
+			}
+
+			cntr_marked_events |= 1 << pmc;
+			break;
+		case 4:
+		case 5:
+			cntr_marked_events |= (unit == 0xd) << pmc;
+			break;
+		case 6:
+			if (psel == 0x64)
+				cntr_marked_events |= (pmc >= 2) << pmc;
+			break;
+		case 8:
+			cntr_marked_events |= (unit == 0xd) << pmc;
+			break;
+		}
+	}
+	return cntr_marked_events;
+}
 
 static int power4_reg_setup(struct op_counter_config *ctr,
 			     struct op_system_config *sys,
@@ -47,6 +109,23 @@ static int power4_reg_setup(struct op_counter_config *ctr,
 	mmcr1_val = sys->mmcr1;
 	mmcra_val = sys->mmcra;
 
+	/* Power 7+ and newer architectures:
+	 * Determine which counter events in the group (the group of events is
+	 * specified by the bit settings in the MMCR1 register) are marked
+	 * events for use in the interrupt handler.  Do the calculation once
+	 * before OProfile starts.  Information is used in the interrupt
+	 * handler.  Starting with Power 7+ we only record the sample for
+	 * marked events if the SIAR valid bit is set.  For non marked events
+	 * the sample is always recorded.
+	 */
+	if (pvr_version_is(PVR_POWER7p))
+		cntr_marked_events = power7_marked_instr_event(mmcr1_val);
+	else
+		cntr_marked_events = 0; /* For older processors, set the bit map
+					 * to zero so the sample will always be
+					 * be recorded.
+					 */
+
 	for (i = 0; i < cur_cpu_spec->num_pmcs; ++i)
 		reset_value[i] = 0x80000000UL - ctr[i].count;
 
@@ -291,6 +370,7 @@ static void power4_handle_interrupt(struct pt_regs *regs,
 	int i;
 	unsigned int mmcr0;
 	unsigned long mmcra;
+	bool siar_valid = false;
 
 	mmcra = mfspr(SPRN_MMCRA);
 
@@ -300,11 +380,29 @@ static void power4_handle_interrupt(struct pt_regs *regs,
 	/* set the PMM bit (see comment below) */
 	mtmsrd(mfmsr() | MSR_PMM);
 
+	/* Check that the SIAR  valid bit in MMCRA is set to 1. */
+	if ((mmcra & MMCRA_SIAR_VALID_MASK) == MMCRA_SIAR_VALID_MASK)
+		siar_valid = true;
+
 	for (i = 0; i < cur_cpu_spec->num_pmcs; ++i) {
 		val = classic_ctr_read(i);
 		if (pmc_overflow(val)) {
 			if (oprofile_running && ctr[i].enabled) {
-				oprofile_add_ext_sample(pc, regs, i, is_kernel);
+				/* Power 7+ and newer architectures:
+				 * If the event is a marked event, then only
+				 * save the sample if the SIAR valid bit is
+				 * set.  If the event is not marked, then
+				 * always save the sample.
+				 * Note, the Sample enable bit in the MMCRA
+				 * register must be set to 1 if the group
+				 * contains a marked event.
+				 */
+				if ((siar_valid &&
+				     (cntr_marked_events & (1 << i)))
+				    || !(cntr_marked_events & (1 << i)))
+					oprofile_add_ext_sample(pc, regs, i,
+								is_kernel);
+
 				classic_ctr_write(i, reset_value[i]);
 			} else {
 				classic_ctr_write(i, 0);