diff options
Diffstat (limited to 'arch/powerpc/oprofile')
| -rw-r--r-- | arch/powerpc/oprofile/Makefile | 1 | ||||
| -rw-r--r-- | arch/powerpc/oprofile/common.c | 83 | ||||
| -rw-r--r-- | arch/powerpc/oprofile/op_model_7450.c | 206 | ||||
| -rw-r--r-- | arch/powerpc/oprofile/op_model_power4.c | 4 | ||||
| -rw-r--r-- | arch/powerpc/oprofile/op_model_rs64.c | 3 |
5 files changed, 244 insertions, 53 deletions
diff --git a/arch/powerpc/oprofile/Makefile b/arch/powerpc/oprofile/Makefile index 0782d0cca89..554cd7c7532 100644 --- a/arch/powerpc/oprofile/Makefile +++ b/arch/powerpc/oprofile/Makefile @@ -9,3 +9,4 @@ DRIVER_OBJS := $(addprefix ../../../drivers/oprofile/, \ oprofile-y := $(DRIVER_OBJS) common.o oprofile-$(CONFIG_PPC64) += op_model_rs64.o op_model_power4.o oprofile-$(CONFIG_FSL_BOOKE) += op_model_fsl_booke.o +oprofile-$(CONFIG_PPC32) += op_model_7450.o diff --git a/arch/powerpc/oprofile/common.c b/arch/powerpc/oprofile/common.c index af2c05d20ba..cc2535be3a7 100644 --- a/arch/powerpc/oprofile/common.c +++ b/arch/powerpc/oprofile/common.c @@ -14,9 +14,6 @@ */ #include <linux/oprofile.h> -#ifndef __powerpc64__ -#include <linux/slab.h> -#endif /* ! __powerpc64__ */ #include <linux/init.h> #include <linux/smp.h> #include <linux/errno.h> @@ -31,10 +28,6 @@ static struct op_powerpc_model *model; static struct op_counter_config ctr[OP_MAX_COUNTER]; static struct op_system_config sys; -#ifndef __powerpc64__ -static char *cpu_type; -#endif /* ! __powerpc64__ */ - static void op_handle_interrupt(struct pt_regs *regs) { model->handle_interrupt(regs, ctr); @@ -53,14 +46,7 @@ static int op_powerpc_setup(void) model->reg_setup(ctr, &sys, model->num_counters); /* Configure the registers on all cpus. */ -#ifdef __powerpc64__ on_each_cpu(model->cpu_setup, NULL, 0, 1); -#else /* __powerpc64__ */ -#if 0 - /* FIXME: Make multi-cpu work */ - on_each_cpu(model->reg_setup, NULL, 0, 1); -#endif -#endif /* __powerpc64__ */ return 0; } @@ -95,7 +81,7 @@ static int op_powerpc_create_files(struct super_block *sb, struct dentry *root) { int i; -#ifdef __powerpc64__ +#ifdef CONFIG_PPC64 /* * There is one mmcr0, mmcr1 and mmcra for setting the events for * all of the counters. @@ -103,7 +89,7 @@ static int op_powerpc_create_files(struct super_block *sb, struct dentry *root) oprofilefs_create_ulong(sb, root, "mmcr0", &sys.mmcr0); oprofilefs_create_ulong(sb, root, "mmcr1", &sys.mmcr1); oprofilefs_create_ulong(sb, root, "mmcra", &sys.mmcra); -#endif /* __powerpc64__ */ +#endif for (i = 0; i < model->num_counters; ++i) { struct dentry *dir; @@ -115,65 +101,68 @@ static int op_powerpc_create_files(struct super_block *sb, struct dentry *root) oprofilefs_create_ulong(sb, dir, "enabled", &ctr[i].enabled); oprofilefs_create_ulong(sb, dir, "event", &ctr[i].event); oprofilefs_create_ulong(sb, dir, "count", &ctr[i].count); -#ifdef __powerpc64__ + /* - * We dont support per counter user/kernel selection, but - * we leave the entries because userspace expects them + * Classic PowerPC doesn't support per-counter + * control like this, but the options are + * expected, so they remain. For Freescale + * Book-E style performance monitors, we do + * support them. */ -#endif /* __powerpc64__ */ oprofilefs_create_ulong(sb, dir, "kernel", &ctr[i].kernel); oprofilefs_create_ulong(sb, dir, "user", &ctr[i].user); -#ifndef __powerpc64__ - /* FIXME: Not sure if this is used */ -#endif /* ! __powerpc64__ */ oprofilefs_create_ulong(sb, dir, "unit_mask", &ctr[i].unit_mask); } oprofilefs_create_ulong(sb, root, "enable_kernel", &sys.enable_kernel); oprofilefs_create_ulong(sb, root, "enable_user", &sys.enable_user); -#ifdef __powerpc64__ +#ifdef CONFIG_PPC64 oprofilefs_create_ulong(sb, root, "backtrace_spinlocks", &sys.backtrace_spinlocks); -#endif /* __powerpc64__ */ +#endif /* Default to tracing both kernel and user */ sys.enable_kernel = 1; sys.enable_user = 1; -#ifdef __powerpc64__ +#ifdef CONFIG_PPC64 /* Turn on backtracing through spinlocks by default */ sys.backtrace_spinlocks = 1; -#endif /* __powerpc64__ */ +#endif return 0; } int __init oprofile_arch_init(struct oprofile_operations *ops) { -#ifndef __powerpc64__ -#ifdef CONFIG_FSL_BOOKE - model = &op_model_fsl_booke; + if (!cur_cpu_spec->oprofile_cpu_type) + return -ENODEV; + + switch (cur_cpu_spec->oprofile_type) { +#ifdef CONFIG_PPC64 + case PPC_OPROFILE_RS64: + model = &op_model_rs64; + break; + case PPC_OPROFILE_POWER4: + model = &op_model_power4; + break; #else - return -ENODEV; + case PPC_OPROFILE_G4: + model = &op_model_7450; + break; #endif +#ifdef CONFIG_FSL_BOOKE + case PPC_OPROFILE_BOOKE: + model = &op_model_fsl_booke; + break; +#endif + default: + return -ENODEV; + } - cpu_type = kmalloc(32, GFP_KERNEL); - if (NULL == cpu_type) - return -ENOMEM; - - sprintf(cpu_type, "ppc/%s", cur_cpu_spec->cpu_name); - - model->num_counters = cur_cpu_spec->num_pmcs; - - ops->cpu_type = cpu_type; -#else /* __powerpc64__ */ - if (!cur_cpu_spec->oprofile_model || !cur_cpu_spec->oprofile_cpu_type) - return -ENODEV; - model = cur_cpu_spec->oprofile_model; model->num_counters = cur_cpu_spec->num_pmcs; ops->cpu_type = cur_cpu_spec->oprofile_cpu_type; -#endif /* __powerpc64__ */ ops->create_files = op_powerpc_create_files; ops->setup = op_powerpc_setup; ops->shutdown = op_powerpc_shutdown; @@ -188,8 +177,4 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) void oprofile_arch_exit(void) { -#ifndef __powerpc64__ - kfree(cpu_type); - cpu_type = NULL; -#endif /* ! __powerpc64__ */ } diff --git a/arch/powerpc/oprofile/op_model_7450.c b/arch/powerpc/oprofile/op_model_7450.c new file mode 100644 index 00000000000..32abfdbb0eb --- /dev/null +++ b/arch/powerpc/oprofile/op_model_7450.c @@ -0,0 +1,206 @@ +/* + * oprofile/op_model_7450.c + * + * Freescale 745x/744x oprofile support, based on fsl_booke support + * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM + * + * Copyright (c) 2004 Freescale Semiconductor, Inc + * + * Author: Andy Fleming + * Maintainer: Kumar Gala <galak@kernel.crashing.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/oprofile.h> +#include <linux/init.h> +#include <linux/smp.h> +#include <asm/ptrace.h> +#include <asm/system.h> +#include <asm/processor.h> +#include <asm/cputable.h> +#include <asm/page.h> +#include <asm/pmc.h> +#include <asm/oprofile_impl.h> + +static unsigned long reset_value[OP_MAX_COUNTER]; + +static int oprofile_running; +static u32 mmcr0_val, mmcr1_val, mmcr2_val; + +#define MMCR0_PMC1_SHIFT 6 +#define MMCR0_PMC2_SHIFT 0 +#define MMCR1_PMC3_SHIFT 27 +#define MMCR1_PMC4_SHIFT 22 +#define MMCR1_PMC5_SHIFT 17 +#define MMCR1_PMC6_SHIFT 11 + +#define mmcr0_event1(event) \ + ((event << MMCR0_PMC1_SHIFT) & MMCR0_PMC1SEL) +#define mmcr0_event2(event) \ + ((event << MMCR0_PMC2_SHIFT) & MMCR0_PMC2SEL) + +#define mmcr1_event3(event) \ + ((event << MMCR1_PMC3_SHIFT) & MMCR1_PMC3SEL) +#define mmcr1_event4(event) \ + ((event << MMCR1_PMC4_SHIFT) & MMCR1_PMC4SEL) +#define mmcr1_event5(event) \ + ((event << MMCR1_PMC5_SHIFT) & MMCR1_PMC5SEL) +#define mmcr1_event6(event) \ + ((event << MMCR1_PMC6_SHIFT) & MMCR1_PMC6SEL) + +#define MMCR0_INIT (MMCR0_FC | MMCR0_FCS | MMCR0_FCP | MMCR0_FCM1 | MMCR0_FCM0) + +/* Unfreezes the counters on this CPU, enables the interrupt, + * enables the counters to trigger the interrupt, and sets the + * counters to only count when the mark bit is not set. + */ +static void pmc_start_ctrs(void) +{ + u32 mmcr0 = mfspr(SPRN_MMCR0); + + mmcr0 &= ~(MMCR0_FC | MMCR0_FCM0); + mmcr0 |= (MMCR0_FCECE | MMCR0_PMC1CE | MMCR0_PMCnCE | MMCR0_PMXE); + + mtspr(SPRN_MMCR0, mmcr0); +} + +/* Disables the counters on this CPU, and freezes them */ +static void pmc_stop_ctrs(void) +{ + u32 mmcr0 = mfspr(SPRN_MMCR0); + + mmcr0 |= MMCR0_FC; + mmcr0 &= ~(MMCR0_FCECE | MMCR0_PMC1CE | MMCR0_PMCnCE | MMCR0_PMXE); + + mtspr(SPRN_MMCR0, mmcr0); +} + +/* Configures the counters on this CPU based on the global + * settings */ +static void fsl7450_cpu_setup(void *unused) +{ + /* freeze all counters */ + pmc_stop_ctrs(); + + mtspr(SPRN_MMCR0, mmcr0_val); + mtspr(SPRN_MMCR1, mmcr1_val); + mtspr(SPRN_MMCR2, mmcr2_val); +} + +#define NUM_CTRS 6 + +/* Configures the global settings for the countes on all CPUs. */ +static void fsl7450_reg_setup(struct op_counter_config *ctr, + struct op_system_config *sys, + int num_ctrs) +{ + int i; + + /* Our counters count up, and "count" refers to + * how much before the next interrupt, and we interrupt + * on overflow. So we calculate the starting value + * which will give us "count" until overflow. + * Then we set the events on the enabled counters */ + for (i = 0; i < NUM_CTRS; ++i) + reset_value[i] = 0x80000000UL - ctr[i].count; + + /* Set events for Counters 1 & 2 */ + mmcr0_val = MMCR0_INIT | mmcr0_event1(ctr[0].event) + | mmcr0_event2(ctr[1].event); + + /* Setup user/kernel bits */ + if (sys->enable_kernel) + mmcr0_val &= ~(MMCR0_FCS); + + if (sys->enable_user) + mmcr0_val &= ~(MMCR0_FCP); + + /* Set events for Counters 3-6 */ + mmcr1_val = mmcr1_event3(ctr[2].event) + | mmcr1_event4(ctr[3].event) + | mmcr1_event5(ctr[4].event) + | mmcr1_event6(ctr[5].event); + + mmcr2_val = 0; +} + +/* Sets the counters on this CPU to the chosen values, and starts them */ +static void fsl7450_start(struct op_counter_config *ctr) +{ + int i; + + mtmsr(mfmsr() | MSR_PMM); + + for (i = 0; i < NUM_CTRS; ++i) { + if (ctr[i].enabled) + ctr_write(i, reset_value[i]); + else + ctr_write(i, 0); + } + + /* Clear the freeze bit, and enable the interrupt. + * The counters won't actually start until the rfi clears + * the PMM bit */ + pmc_start_ctrs(); + + oprofile_running = 1; +} + +/* Stop the counters on this CPU */ +static void fsl7450_stop(void) +{ + /* freeze counters */ + pmc_stop_ctrs(); + + oprofile_running = 0; + + mb(); +} + + +/* Handle the interrupt on this CPU, and log a sample for each + * event that triggered the interrupt */ +static void fsl7450_handle_interrupt(struct pt_regs *regs, + struct op_counter_config *ctr) +{ + unsigned long pc; + int is_kernel; + int val; + int i; + + /* set the PMM bit (see comment below) */ + mtmsr(mfmsr() | MSR_PMM); + + pc = mfspr(SPRN_SIAR); + is_kernel = (pc >= KERNELBASE); + + for (i = 0; i < NUM_CTRS; ++i) { + val = ctr_read(i); + if (val < 0) { + if (oprofile_running && ctr[i].enabled) { + oprofile_add_pc(pc, is_kernel, i); + ctr_write(i, reset_value[i]); + } else { + ctr_write(i, 0); + } + } + } + + /* The freeze bit was set by the interrupt. */ + /* Clear the freeze bit, and reenable the interrupt. + * The counters won't actually start until the rfi clears + * the PMM bit */ + pmc_start_ctrs(); +} + +struct op_powerpc_model op_model_7450= { + .reg_setup = fsl7450_reg_setup, + .cpu_setup = fsl7450_cpu_setup, + .start = fsl7450_start, + .stop = fsl7450_stop, + .handle_interrupt = fsl7450_handle_interrupt, +}; diff --git a/arch/powerpc/oprofile/op_model_power4.c b/arch/powerpc/oprofile/op_model_power4.c index a3401b46f3b..659a021da0c 100644 --- a/arch/powerpc/oprofile/op_model_power4.c +++ b/arch/powerpc/oprofile/op_model_power4.c @@ -252,7 +252,7 @@ static unsigned long get_pc(struct pt_regs *regs) return (unsigned long)__va(pc); /* Not sure where we were */ - if (pc < KERNELBASE) + if (!is_kernel_addr(pc)) /* function descriptor madness */ return *((unsigned long *)kernel_unknown_bucket); @@ -264,7 +264,7 @@ static int get_kernel(unsigned long pc) int is_kernel; if (!mmcra_has_sihv) { - is_kernel = (pc >= KERNELBASE); + is_kernel = is_kernel_addr(pc); } else { unsigned long mmcra = mfspr(SPRN_MMCRA); is_kernel = ((mmcra & MMCRA_SIPR) == 0); diff --git a/arch/powerpc/oprofile/op_model_rs64.c b/arch/powerpc/oprofile/op_model_rs64.c index e010b85996e..5c909ee609f 100644 --- a/arch/powerpc/oprofile/op_model_rs64.c +++ b/arch/powerpc/oprofile/op_model_rs64.c @@ -178,7 +178,6 @@ static void rs64_handle_interrupt(struct pt_regs *regs, int val; int i; unsigned long pc = mfspr(SPRN_SIAR); - int is_kernel = (pc >= KERNELBASE); /* set the PMM bit (see comment below) */ mtmsrd(mfmsr() | MSR_PMM); @@ -187,7 +186,7 @@ static void rs64_handle_interrupt(struct pt_regs *regs, val = ctr_read(i); if (val < 0) { if (ctr[i].enabled) { - oprofile_add_pc(pc, is_kernel, i); + oprofile_add_pc(pc, is_kernel_addr(pc), i); ctr_write(i, reset_value[i]); } else { ctr_write(i, 0); |